diff options
Diffstat (limited to 'build_tools/clarch/larch/profiles/i686-testing-local')
61 files changed, 0 insertions, 2296 deletions
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks b/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks deleted file mode 100644 index d4da97c..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks +++ /dev/null @@ -1,225 +0,0 @@ -# These are needed to build a live CD -linhes-live -squashfs-tools -lzop - -syslinux - -# You need a kernel. -#kernel26 is now in 'base' -aufs2 -kernel26-headers - -# To eject a cd -eject - -# Useful for use as installer, etc. -#ntfsprogs -#parted - -#ddcxinfo-knoppix -#hwd - -sudo - -lsof -cdrkit -dvd+rw-tools - - -# generally useful tools which don't require X -#mtools is required by syslinux -openssh -dosfstools -alsa-lib -alsa-oss -alsa-utils -cdparanoia -cdrdao -unzip - - -# Xorg packages -xorg-server -xorg-xkb-utils -xorg-xauth -xorg-server-utils -xorg-xinit -xorg-input-drivers -xterm -xorg-fonts-100dpi -xorg-fonts-75dpi -xorg-res-utils -ttf-ms-fonts - -#xorg-video-drivers -xf86-video-amd -xf86-video-apm -xf86-video-ark -xf86-video-ati -xf86-video-chips -xf86-video-cirrus -xf86-video-dummy -xf86-video-fbdev -xf86-video-glint -xf86-video-i128 -xf86-video-i740 -#xf86-video-i810 -#xf86-video-imstt -xf86-video-intel -xf86-video-mga -xf86-video-neomagic -xf86-video-nv -xf86-video-openchrome -xf86-video-radeonhd -xf86-video-rendition -xf86-video-s3 -xf86-video-s3virge -xf86-video-savage -xf86-video-siliconmotion -xf86-video-sis -xf86-video-sisusb -#xf86-video-tdfx -xf86-video-trident -xf86-video-tseng -#unichrome is busted and causes X to segfault -#xf86-video-unichrome -xf86-video-v4l -xf86-video-vesa -#vga should not be installed, vesa can handle when other drivers fail -#xf86-video-vga -#xf86-video-via -xf86-video-vmware -xf86-video-voodoo - -# X apps -#luser -#localed -unclutter - -#xkmap - -#gparted -#larchin - -#mythtv -mythtv -mythtv-contrib -mytharchive -mythbrowser -#mythcontrols -#mythflix -mythgallery -mythgame -mythmusic -#mythphone -myththemes -mythweather -mythvideo -mythsmolt -#morethemes -linhes-theme -linhes-scripts -nuvexport -lirc -lirc-utils -mysql -xmltv -esound - -#Window Manager -fluxbox -feh - -#Other -dbus -hal -hal-info -fftw2 -libcdaudio -iptables -pkgconfig -taglib -portmap -ivtv-utils -dvb-firmware -dbus-python - -#MythVantage Installer deps -bc -mysql-python -expect -curl -dnsutils -avahi - -#Wireless -b43-fwcutter -#ipw2100-fw -#ipw2200-fw -#ipw3945 -#ipw3945-ucode -#ipw3945d -madwifi -madwifi-utils -ndiswrapper -ndiswrapper-utils -netcfg -tiacx -tiacx-firmware -wireless_tools -#wlan-ng26 -#wlan-ng26-utils -zd1211-firmware -hdhomerun -#---- -LinHES-config -LinHES-system -linhes-sounds -etcnet -runit -runit-scripts -media_dirs - -#--- -tweaker -ethtool -nfs-utils -netkit-telnet -ntp -syslog-ng -ppp -mingetty -setserial -acpid -fbsplash -linhes-splash -nvram-wakup -#tatir -pvr150-firmware -wol -mjpegtools -perl-net-upnp -aumix -tablet-encode -ntfs-3g -joyutils -ffmpeg-svn -myth2ipod -myt2xvid3 -mediaserv - -#---Firewire -libraw1394 -libavc1394 -# wrapper for mplayer -mplayer-wrapper - -# in-place commercial remover (for user job) -# moved to linhes-scripts -#removecommercials - -#Modules for Atheros base NICs -#atl1e - -linux-firmware diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs b/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs deleted file mode 100644 index 747ab46..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs +++ /dev/null @@ -1,59 +0,0 @@ -mythdb-initial -nvidia -nvidia-utils -vdpauinfo -nvidia-96xx -nvidia-96xx-utils -#vdpinfo-96xx -lighttpd -local-website -mythweb -nfs-utils -samba -mplayer -xine-ui -lcdproc -mythappletrailers -mythstream -oss -xscreensaver -tightvnc - -#added from error log -mysql -mythnews -pycairo -pygobject -python-numeric -pygtk -fam -sqlite3 -xe -romdb -gconf -gnome-keyring -gnome-mime-data -gnome-python -gnome-python-extras -gnome-vfs -hunspell -libbonobo -libbonoboui -libgnome -libgnomecanvas -libgnomeui -libidl2 -miro -mozilla-common -nspr -nss -orbit2 -polkit -pyorbit -pyrex -startup-notification -xulrunner -mythmovies -myth2ipod -myt2xvid3 -#mediaserv diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg deleted file mode 100644 index 5ef732d..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg +++ /dev/null @@ -1,38 +0,0 @@ -default vesamenu.c32 -prompt 0 -#timeout 300 - -MENU BACKGROUND vbg.jpg -MENU COLOR border 31;40 #90ffff00 #00000000 std -MENU COLOR sel 31;47 #00000000 #FFFFFF15 al -MENU ROWS 4 -MENU CMDLINEROW 22 -#MENU TIMEOUTROW 23 -MENU TABMSGROW 22 - -MENU TITLE LinHES: The Linux Home Entertainment System - - -label linux-nox -MENU LABEL Boot to console (without X windowing) -kernel vmlinuz -append initrd=larch.img NoX - -label linux-c2r -MENU LABEL LinHES: copy-to-ram (also activates swap) -kernel vmlinuz -append initrd=larch.img c2r - -label linux-swap -MENU LABEL LinHES: Use swap -kernel vmlinuz -append initrd=larch.img swap - -label memtest -MENU LABEL Memory tester -kernel memtest - -label goback -MENU LABEL Back -kernel vesamenu.c32 -append menu isolinux.cfg
\ No newline at end of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg deleted file mode 100644 index c041eb2..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg +++ /dev/null @@ -1,57 +0,0 @@ -default vesamenu.c32 -prompt 0 -#timeout 300 - -MENU BACKGROUND vbg.jpg -MENU COLOR border 31;40 #90ffff00 #00000000 std -MENU COLOR sel 31;47 #00000000 #FFFFFF15 al -MENU ROWS 4 -MENU CMDLINEROW 22 -MENU TABMSGROW 22 - -MENU TITLE LinHES: The Linux Home Entertainment System - -label atomic -MENU LABEL LinHES on Atomic Ant! -kernel vmlinuz -append initrd=larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart,intel_agp - -#label linux-i810 -#MENU LABEL with Intel i810 driver (DRI disabled) -#kernel vmlinuz -#append initrd=larch.img i810 - -label linux-vesa -MENU LABEL Force use of vesa driver -kernel vmlinuz -append initrd=larch.img forceXvesa - -lable skipTweaker -MENU LABEL LinHES no splashscren no tweaker. -kernel vmlinuz -append initrd=larch.img no_meth - -label dragon -MENU LABEL Dragon Version 1 -kernel vmlinuz -append initrd=larch.img type=dragon vga=0x314 quiet splash=silent,theme:linhes console=tty1 - -label dragon2 -MENU LABEL Dragon Version 2 -kernel vmlinuz -append initrd=larch.img type=dragon2 vga=0x314 quiet splash=silent,theme:linhes console=tty1 - -label ausdragon -MENU LABEL Australian Dragon -kernel vmlinuz -append initrd=larch.img type=ausdragon vga=0x314 quiet splash=silent,theme:linhes console=tty1 - -label 8400 -MENU LABEL For the Nvidia 8400 chipset. -kernel vmlinuz -append initrd=larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart - -label goback -MENU LABEL Back -kernel vesamenu.c32 -append menu isolinux.cfg diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg deleted file mode 100644 index 646b173..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg +++ /dev/null @@ -1,37 +0,0 @@ -default vesamenu.c32 -prompt 0 -timeout 300 - -MENU BACKGROUND vbg.jpg -MENU COLOR border 31;40 #90ffff00 #00000000 std -MENU COLOR sel 31;47 #00000000 #FFFFFF15 al -MENU ROWS 4 -MENU CMDLINEROW 22 -MENU TIMEOUTROW 23 -MENU TABMSGROW 22 - -MENU TITLE LinHES: The Linux Home Entertainment System - -label linux -MENU LABEL LinHES (default). -kernel vmlinuz -append initrd=larch.img vga=0x314 quiet splash=silent,theme:linhes console=tty1 - -label linux-nosplash -MENU LABEL LinHES without splash screen. -kernel vmlinuz -append initrd=larch.img - -label special -MENU LABEL Special Hardware -kernel vesamenu.c32 -append hardsub.cfg - -label debug -MENU LABEL Debug options -kernel vesamenu.c32 -append debugsub.cfg - -label local -menu label Boot from ^local drive -localboot 0xffff diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg Binary files differdeleted file mode 100644 index 07d31a6..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg +++ /dev/null diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc deleted file mode 100644 index dd95b26..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc +++ /dev/null @@ -1,3 +0,0 @@ -type=0 -orientation=1 - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin deleted file mode 100644 index 93ca142..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin +++ /dev/null @@ -1 +0,0 @@ -root
\ No newline at end of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile deleted file mode 100644 index c49349b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile +++ /dev/null @@ -1 +0,0 @@ -. $HOME/.bashrc diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0 deleted file mode 100644 index c80b7c2..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0 +++ /dev/null @@ -1,63 +0,0 @@ -# This is a script 'sourced' from the installation script larch-tidy. -# Its purpose is to remove custom live-only stuff from a just-installed -# system. -# ${INSTALL} is the path to the installed system root directory. - -rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop" - -if [ -f ${INSTALL}/etc/rc.local.orig ]; then - mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local -fi -if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then - mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown -fi - -# slim is currently started in inittab -#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf - -# Copy xorg.conf.i810 to target xorg.conf if necessary -if ! [ -f /etc/X11/xorg.conf ]; then - if grep i810 /proc/cmdline &>/dev/null; then - cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf - fi -fi - -#***************************************************# -# Replace uses of larchquit in xfce panels and menu.# -#***************************************************# -### Unfortunately this isn't very simple. If anyone has a better way of -### providing different Quit actions in the live version and the version -### installed to disk from it, please let me know! -### Maybe it would be better just to provide a special live quit desktop -### icon which can be removed on installation, like the installation icon. - -defaultquit='<builtin name="Quit" cmd="Quit" icon="gnome-logout"/>' - -replacequit () -{ - for f in ${INSTALL}$1/.config/xfce4/panel/*; do - if grep "^Exec=larchquit" ${f}; then - n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" ) - cp /.livesys/actions.rc \ - ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc - rm ${f} - - sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \ - ${INSTALL}$1/.config/xfce4/panel/panels.xml - fi - done - - if [ -f ${INSTALL}$1/.bash_profile ]; then - sed -i "s|<app .*cmd=\"larchquit.*/>|${defaultquit}|" \ - ${INSTALL}$1/.config/xfce4/desktop/menu.xml - - cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session - cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile - fi -} - -for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \ - /root /etc/skel; do - replacequit ${hd} &>/dev/null -done -#***************************************************# diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh b/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh deleted file mode 100755 index 6a4fdee..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh +++ /dev/null @@ -1 +0,0 @@ -../../run/xpack -r overlay overlay.xpk diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen b/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen deleted file mode 100644 index 760ec23..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen +++ /dev/null @@ -1,5 +0,0 @@ -# locales for larch (/etc/locale.gen) - -en_US ISO-8859-1 -en_US.UTF-8 UTF-8 - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf b/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf deleted file mode 100644 index 27fe40f..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf +++ /dev/null @@ -1,55 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES="piix ide_disk reiserfs" -MODULES="" - -# BINARIES -# This setting includes, into the CPIO image, and additional -# binaries a given user may wish. This is run first, so may -# be used to override the actual binaries used in a given hook. -# (Existing files are NOT overwritten is already added) -# BINARIES are dependancy parsed, so you may safely ignore libraries -#BINARIES="" - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in anyway. This is useful for config files. -# Some users may wish to include modprobe.conf for custom module options, -# like so: -# FILES="/etc/modprobe.conf" -FILES="" - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'modload' may be used in place of 'udev', but is not recommended -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -# This setup specifies all modules in the MODULES setting above. -# No raid, lvm, or encrypted root is needed. -# HOOKS="base" -# -# This setup will autodetect all modules for your system and should -# work as a sane default -# HOOKS="base udev autodetect ide scsi sata filesystems" -# -# This setup will generate a 'full' image which supports most systems. -# No autodetection is done. -# HOOKS="base udev ide scsi sata usb filesystems" -# -# This setup assembles an ide raid array with an encrypted root FS. -# Note: See 'mkinitcpio -H raid' for more information on raid devices. -# HOOKS="base udev ide filesystems raid encrypt" -# -# This setup loads an LVM volume group on a usb device. -# HOOKS="base udev usb filesystems lvm" -#HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3 fbsplash" -HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3" diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7 b/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7 deleted file mode 100644 index 7279f45..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7 +++ /dev/null @@ -1,54 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES="piix ide_disk reiserfs" -MODULES="" - -# BINARIES -# This setting includes, into the CPIO image, and additional -# binaries a given user may wish. This is run first, so may -# be used to override the actual binaries used in a given hook. -# (Existing files are NOT overwritten is already added) -# BINARIES are dependancy parsed, so you may safely ignore libraries -#BINARIES="" - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in anyway. This is useful for config files. -# Some users may wish to include modprobe.conf for custom module options, -# like so: -# FILES="/etc/modprobe.conf" -FILES="" - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'modload' may be used in place of 'udev', but is not recommended -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -# This setup specifies all modules in the MODULES setting above. -# No raid, lvm, or encrypted root is needed. -# HOOKS="base" -# -# This setup will autodetect all modules for your system and should -# work as a sane default -# HOOKS="base udev autodetect ide scsi sata filesystems" -# -# This setup will generate a 'full' image which supports most systems. -# No autodetection is done. -# HOOKS="base udev ide scsi sata usb filesystems" -# -# This setup assembles an ide raid array with an encrypted root FS. -# Note: See 'mkinitcpio -H raid' for more information on raid devices. -# HOOKS="base udev ide filesystems raid encrypt" -# -# This setup loads an LVM volume group on a usb device. -# HOOKS="base udev usb filesystems lvm" -HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3 fbsplash" diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps deleted file mode 100644 index 5a2b8d6..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps +++ /dev/null @@ -1,2 +0,0 @@ -[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} -[startup] {sudo /usr/MythVantage/bin/mythvantage} diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc deleted file mode 100755 index d988c98..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -. /etc/profile -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) -# - -# exec gnome-session -# exec startkde -# exec startxfce4 -# exec icewm -# exec openbox -# exec blackbox -# exec fluxbox -# exec ratpoison -# exec dwm -# ... or any other WM of your choosing ... -exec fluxbox diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf b/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf deleted file mode 100755 index 617c4d1..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf +++ /dev/null @@ -1,62 +0,0 @@ -# -# /etc/pacman.conf -# from pacman.conf MV -# NOTE: If you find a mirror that is geographically close to you, please -# move it to the top of the server list, so pacman will choose it -# first. -# -# To re-sort your mirror lists by ping/traceroute results, use the -# /usr/bin/sortmirrors script. It requires the "netselect" package. -# - -# See the pacman manpage for option directives - -# -# GENERAL OPTIONS -# -[options] -LogFile = /var/log/pacman.log -NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers -NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf -NoUpgrade = etc/rc.conf etc/rc.local -NoUpgrade = etc/modprobe.conf etc/modules.conf -NoUpgrade = etc/lilo.conf boot/grub/menu.lst -NoUpgrade = data/srv/hobbit/etc/bb-hosts -NoUpgrade = etc/func/minion.conf - -HoldPkg = pacman glibc -CacheDir = /data/var/cache/pacman/pkg -#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u - -# -# REPOSITORIES -# - can be defined here or included from another file -# - pacman will search repositories in the order defined here. -# - local/custom mirrors can be added here or in separate files -# -[core-testing] -Server = file:///data/pkg_repo/i686/core-testing - -[extra-testing] -Server = file:///data/pkg_repo/i686/extra-testing - - - -########################ARCH DEFAULTS############# -#[core] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[extra] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[community] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -# Unstable is disabled by default. To enable, uncomment the following -# two lines. You can add preferred servers immediately after the header, -# and they will be used before the default mirrors. -#[unstable] -#Include = /etc/pacman.d/mirrorlist diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh b/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh deleted file mode 100755 index 883d9ad..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/bash -echo $@ -INSTDIR=$1 -PROFILE=$2 - -#everything below this point is specific to MythVantage -cp -rp $PROFILE/post_process $INSTDIR/.post_process -chroot $INSTDIR .post_process/modify_chroot.sh -rm -rf $INSTDIR/.post_process - -#find the size of the install. -#This is used to calculate progress on the install -tsize=`du -sm $INSTDIR/ | cut -f1` -echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size -upsize=`du -sm --exclude data $INSTDIR/ |cut -f1` -echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile deleted file mode 100644 index c49349b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile +++ /dev/null @@ -1 +0,0 @@ -. $HOME/.bashrc diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc deleted file mode 100644 index fcabce0..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc +++ /dev/null @@ -1,3 +0,0 @@ -alias ls='ls --color=auto' -PS1='[\u@\h \W]\$ ' - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps deleted file mode 100644 index 994daf7..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps +++ /dev/null @@ -1,4 +0,0 @@ -#Uncomment below if you are using firewire -#[startup] {/usr/bin/plugctl -n 0 "oPCR[0].n_p2pconnections=1"} -[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} -[startup] {/usr/LH/bin/LinHES-run} diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init deleted file mode 100644 index 9791a7f..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init +++ /dev/null @@ -1,35 +0,0 @@ -session.screen0.slit.placement: BottomRight -session.screen0.slit.direction: Vertical -session.screen0.slit.onTop: False -session.screen0.slit.autoHide: True -session.screen0.tab.placement: Top -session.screen0.toolbar.onTop: False -session.screen0.toolbar.visible: False -session.screen0.toolbar.autoHide: False -session.screen0.toolbar.placement: BottomCenter -session.screen0.toolbar.widthPercent: 66 -session.screen0.workspaceNames: one,two,three,four -session.screen0.strftimeFormat: %k:%M -session.screen0.focusNewWindows: True -session.screen0.focusModel: ClickToFocus -session.screen0.fullMaximization: False -session.screen0.edgeSnapThreshold: 0 -session.screen0.rowPlacementDirection: LeftToRight -session.screen0.workspaces: 4 -session.screen0.focusLastWindow: True -session.screen0.colPlacementDirection: TopToBottom -session.screen0.windowPlacement: RowSmartPlacement -session.screen0.tab.width: 64 -session.screen0.tab.height: 16 -session.screen0.showwindowposition: true -session.opaqueMove: False -session.autoRaiseDelay: 250 -session.menuFile: ~/.fluxbox/menu -session.cacheLife: 5 -session.styleFile: /usr/share/fluxbox/styles/Artwiz -session.keyFile: ~/.fluxbox/keys -session.colorsPerChannel: 4 -session.doubleClickInterval: 250 -session.cacheMax: 200 -session.imageDither: True -session.configVersion: 1 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu deleted file mode 100644 index 858090e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu +++ /dev/null @@ -1,81 +0,0 @@ -# Generated by fluxbox-generate_menu -# -# If you read this it means you want to edit this file manually, so here -# are some useful tips: -# -# - You can add your own menu-entries to ~/.fluxbox/usermenu -# -# - If you miss apps please let me know and I will add them for the next -# release. -# -# - The -r option prevents removing of empty menu entries and lines which -# makes things much more readable. -# -# - To prevent any other app from overwriting your menu -# you can change the menu name in .fluxbox/init to: -# session.menuFile: /home/mythtv/.fluxbox/my-menu -[begin] (Fluxbox) -[encoding] {UTF-8} - [exec] (xterm) {xterm} - [exec] () {} execname is NULL; cannot lookup - [exec] (Run) {fbrun } -[submenu] (Terminals) - [exec] (xterm) {xterm} -[end] -[submenu] (Editors) - [exec] (xedit) {xedit} - [exec] (nano) {xterm -e nano} - [exec] (vi) {xterm -e vi} -[end] -[submenu] (Multimedia) -[submenu] (Audio) - [exec] (alsamixer) {xterm -e alsamixer} -[end] -[submenu] (Video) - [exec] (gmplayer) {gmplayer} -[end] -[submenu] (X-utils) - [exec] (xfontsel) {xfontsel} - [exec] (xman) {xman} - [exec] (xload) {xload} - [exec] (xbiff) {xbiff} - [exec] (xclock) {xclock} - [exec] (xmag) {xmag} - [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults} -[end] -[end] -[submenu] (Office) - [exec] (xclock) {xclock} - [exec] (xcalc) {xcalc} -[end] -[submenu] (Games) - [exec] (xeyes) {xeyes} -[end] -[submenu] (System Tools) - [exec] (top) {xterm -e top} -[end] -[submenu] (fluxbox menu) - [config] (Configure) -[submenu] (System Styles) {Choose a style...} - [stylesdir] (/usr/share/fluxbox/styles) -[end] -[submenu] (User Styles) {Choose a style...} - [stylesdir] (~/.fluxbox/styles) -[end] - [workspaces] (Workspace List) -[submenu] (Tools) - [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center} - [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg} - [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png} - [exec] (Run) {fbrun } - [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu } -[end] - [commanddialog] (Fluxbox Command) - [reconfig] (Reload config) - [restart] (Restart) - [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center} - [separator] - [exit] (Exit) -[end] -[endencoding] -[end] diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig deleted file mode 100644 index ef5b398..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig +++ /dev/null @@ -1,65 +0,0 @@ -# This file is read by fluxbox-generate_menu. If you don't like a -# default you can change it here. Don't forget to remove the # in front -# of the line. - -# Your favourite terminal. Put the command in quotes if you want to use -# options. Put a backslash in before odd chars -# MY_TERM='Eterm --tint \#123456' -# MY_TERM='aterm -tint $(random_color)' - -# Your favourite browser. You can also specify options. -# MY_BROWSER=mozilla - -# Name of the outputfile -# MENUFILENAME=/home/mythtv/.fluxbox/menu - -# MENUTITLE=`fluxbox -version|cut -d " " -f-2` - -# standard url for console-browsers -# HOMEPAGE=fluxbox.org - -# location with your own menu-entries -# USERMENU=~/.fluxbox/usermenu - -# Put the launcher you would like to use here -# LAUNCHER=fbrun -# LAUNCHER=fbgm - -# Options for fbrun -# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run' - -# --- PREFIX'es -# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox -# your prefix is: /usr - -# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so -# there should be no need to specify them. -# -# PREFIX=/usr -# GNOME_PREFIX=/opt/gnome -# KDE_PREFIX=/opt/kde - - -# Sepparate the list of background-dirs with semicolumns ':' -# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers" - - -# --- Boolean variables. -# Setting a variable to no'' won't help. Comment them out if you don't -# want them. Setting are overruled by the command-line options. - -# Include all backgrounds in your backgrounds-directory -# BACKGROUNDMENUITEM=yes - -# Include kde-menus -# KDEMENU=yes - -# Include gnome-menus -# GNOMEMENU=yes - -# enable sudo commands -# DOSUDO=yes - -# Don't cleanup the menu -# REMOVE=no - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png Binary files differdeleted file mode 100644 index 83da80c..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png +++ /dev/null diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc deleted file mode 100755 index 911e76e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/sh - -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) -# - -# exec gnome-session -# exec startkde -# exec startxfce4 -# exec icewm -# exec openbox -# exec blackbox -exec fluxbox -# exec ratpoison -# exec dwm -# ... or any other WM of your choosing ... diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession deleted file mode 100755 index a16dc0b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# -# ~/.xsession -# -# Executed by xdm/gdm/kdm at login -# - -/bin/bash --login -i ~/.xinitrc - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow deleted file mode 100644 index f6cf005..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow +++ /dev/null @@ -1,8 +0,0 @@ -# -# /etc/hosts.allow -# -ALL: 192.168. -ALL: 10. -ALL: 127.0.0.1 -ALL: 172.16. -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny deleted file mode 100755 index ca30ab4..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny +++ /dev/null @@ -1,6 +0,0 @@ -# -# /etc/hosts.deny -# -ALL - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst deleted file mode 100755 index 8a8e3b2..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst +++ /dev/null @@ -1,60 +0,0 @@ -# Config file for GRUB - The GNU GRand Unified Bootloader -# /boot/grub/menu.lst - -# DEVICE NAME CONVERSIONS -# -# Linux Grub -# ------------------------- -# /dev/fd0 (fd0) -# /dev/hda (hd0) -# /dev/hdb2 (hd1,1) -# /dev/hda3 (hd0,2) -# - -# FRAMEBUFFER RESOLUTION SETTINGS -# +-------------------------------------------------+ -# | 640x480 800x600 1024x768 1280x1024 -# ----+-------------------------------------------- -# 256 | 0x301=769 0x303=771 0x305=773 0x307=775 -# 32K | 0x310=784 0x313=787 0x316=790 0x319=793 -# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794 -# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795 -# +-------------------------------------------------+ - -# general configuration: -timeout 5 -default 0 -#color light-blue/black light-cyan/blue - -# boot sections follow -# each is implicitly numbered from 0 in the order of appearance below -# -# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line. -# -#-* -hiddenmenu - -# (0) normal -title LinHes -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1 -initrd /boot/kernel26.img - -# (1) bootsplash -title LinHes-splashy -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes console=tty1 -initrd /boot/kernel26.img - -# (2) noautologin -title LinHES-nologin -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes console=tty1 nox -initrd /boot/kernel26.img - - -# (3) normal -title LinHes-init -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1 -initrd /boot/kernel26.img diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh deleted file mode 100755 index 6caf191..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/bash - -useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users -cp -rvpf /.post_process/home/mythtv /home/ -cp -rvpf /.post_process/home/mythtv/.fluxbox /root -chown -R mythtv.mythtv /home/mythtv/ -chown -R mythtv.mythtv /myth - -cp -f /.post_process/hosts.allow /etc/hosts.allow -cp -f /.post_process/rc.conf /etc/rc.conf -#cp -f /.post_process/rc.shutdown /etc/rc.shutdown -cp -f /.post_process/menu.lst /boot/grub/menu.lst - -cp -f /etc/skel/.bash* /root/ -rm -f /etc/ssh/ssh_host*key* diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf deleted file mode 100755 index 9c17944..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf +++ /dev/null @@ -1,112 +0,0 @@ -# -# /etc/rc.conf - Main Configuration for Arch Linux -# - -# -# ----------------------------------------------------------------------- -# LOCALIZATION -# ----------------------------------------------------------------------- -# -# LOCALE: available languages can be listed with the 'locale -a' command -# HARDWARECLOCK: set to "UTC" or "localtime" -# TIMEZONE: timezones are found in /usr/share/zoneinfo -# KEYMAP: keymaps are found in /usr/share/kbd/keymaps -# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US) -# CONSOLEMAP: found in /usr/share/kbd/consoletrans -# USECOLOR: use ANSI color sequences in startup messages -# -LOCALE="en_US.utf8" -HARDWARECLOCK="UTC" -TIMEZONE="US/Central" -KEYMAP="us" -CONSOLEFONT= -CONSOLEMAP= -USECOLOR="yes" - -# -# ----------------------------------------------------------------------- -# HARDWARE -# ----------------------------------------------------------------------- -# -# Scan hardware and load required modules at bootup -MOD_AUTOLOAD="yes" -if [ -f /etc/systemconfig ] -then - . /etc/systemconfig -fi - -if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ] -then - ALSABLACKLIST="!soundcore" -else - if [ x$Audiotype = xOSS ] - then - ALSABLACKLIST="!soundcore" - else - ALSABLACKLIST="" - fi -fi - -# Module Blacklist - modules in this list will never be loaded by udev -MOD_BLACKLIST_=($ALSABLACKLIST !snd-pcsp ) -# -# Modules to load at boot-up (in this order) -# - prefix a module with a ! to blacklist it -# -MODULES=($MOD_BLACKLIST_) -# Scan for LVM volume groups at startup, required if you use LVM -USELVM="no" - -# -# ----------------------------------------------------------------------- -# NETWORKING -# ----------------------------------------------------------------------- -# -HOSTNAME=`cat /etc/hostname` - -#The following is only used on the install. After the first boot everything is set from /etc/net. - - -# -# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available -# interfaces. -# -# Interfaces to start at boot-up (in this order) -# Declare each interface then list in INTERFACES -# - prefix an entry in INTERFACES with a ! to disable it -# - no hyphens in your interface names - Bash doesn't like it -# -# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp") -# -lo="lo 127.0.0.1" -#eth0="dhcp" -INTERFACES=(lo ) -# -# Routes to start at boot-up (in this order) -# Declare each route then list in ROUTES -# - prefix an entry in ROUTES with a ! to disable it -# -gateway="default gw 192.168.0.1" -ROUTES=(!gateway) -# -# Enable these network profiles at boot-up. These are only useful -# if you happen to need multiple network configurations (ie, laptop users) -# - set to 'menu' to present a menu during boot-up (dialog package required) -# - prefix an entry with a ! to disable it -# -# Network profiles are found in /etc/network-profiles -# -#NET_PROFILES=(main) - -# -# ----------------------------------------------------------------------- -# DAEMONS -# ----------------------------------------------------------------------- -# -# Daemons to start at boot-up (in this order) -# - prefix a daemon with a ! to disable it -# - prefix a daemon with a @ to start it up in the background -# -#DAEMONS=(syslog-ng network netfs crond) -DAEMONS=(fbsplash !syslog-ng !hotplug !pcmcia network !mysqld !dbus !avahi-daemon) -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown deleted file mode 100755 index 1a8cdbe..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown +++ /dev/null @@ -1,104 +0,0 @@ -#!/bin/bash -# -# /etc/rc.shutdown -# - -. /etc/rc.conf -. /etc/rc.d/functions - -# avoid staircase effect -/bin/stty onlcr - -echo " " -printhl "Initiating Shutdown..." -echo " " - -if [ -x /etc/rc.local.shutdown ]; then - /etc/rc.local.shutdown -fi - -if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then - # Shutdown daemons - let i=${#DAEMONS[@]} - while [[ i -ge 0 ]]; do - if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then - /etc/rc.d/${DAEMONS[$i]#@} stop - fi - let i=i-1 - done - # find any leftover daemons and shut them down - if [ -d /var/run/daemons ]; then - for daemon in `ls /var/run/daemons`; do - /etc/rc.d/$daemon stop - done - fi -fi - -# Terminate all processes -stat_busy "Sending SIGTERM To Processes" -/sbin/killall5 -15 &> /dev/null -/bin/sleep 5 -stat_done - -stat_busy "Sending SIGKILL To Processes" -/sbin/killall5 -9 &> /dev/null -/bin/sleep 1 -stat_done - -stat_busy "Saving Random Seed" -/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null -stat_done - -stat_busy "Saving System Clock" -if [ "$HARDWARECLOCK" = "UTC" ]; then - /sbin/hwclock --directisa --utc --systohc -else - /sbin/hwclock --directisa --localtime --systohc -fi -stat_done - -# removing psmouse module to fix some reboot issues on newer laptops -modprobe -r psmouse >/dev/null 2>&1 - -# Write to wtmp file before unmounting -/sbin/halt -w - -stat_busy "Deactivating Swap" -/sbin/swapoff -a -stat_done - -stat_busy "Unmounting Filesystems" -/bin/umount -a -stat_done - -if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then - if [ -d /etc/lvm -a -x /sbin/lvm ]; then - /bin/mount -n -t sysfs none /sys 2>/dev/null - if [ -d /sys/block ]; then - stat_busy "Deactivating LVM2 groups" - /sbin/lvm vgchange --ignorelockingfailure -a n - stat_done - umount /sys - fi - fi -fi - -stat_busy "Remounting Root Filesystem Read-only" -/bin/mount -n -o remount,ro / -stat_done -exit 0 -# Power off or reboot -if [ "$RUNLEVEL" = "0" ]; then - printsep - printhl "${C_H2}POWER OFF" - /sbin/poweroff -d -f -h -i -else - printsep - printhl "${C_H2}REBOOTING" - # adding kexec support - [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1 - /sbin/reboot -d -f -i -fi - -# End of file -# vim: set ts=2 noet: diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh b/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh deleted file mode 100755 index 5bc1f9c..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh -rm -f overlay.xpk -if [ -d overlay/home/mythtv ] -then - chown -R 1000 overlay/home/mythtv -fi -./create_overlay.sh - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx b/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx deleted file mode 100644 index fd0d8d3..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx +++ /dev/null @@ -1,20 +0,0 @@ -# -# patch file for /etc/rc.conf -# - -LOCALE="en_US.utf8" -HARDWARECLOCK="UTC" -TIMEZONE="UTC" -KEYMAP="us" - -#MODULES=(floppy) -MODULES=(!ati_remote) - -HOSTNAME="larch5" - -USELVM="yes" - -#eth0="dhcp" - -DAEMONS=(syslog-ng network mysqld dbus hal avahi-daemon !slim sshd) -SPLASH="splashy" diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom deleted file mode 100644 index 8e3ec5e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom +++ /dev/null @@ -1,22 +0,0 @@ -if grep -v nox /proc/cmdline &>/dev/null && \ - [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then - if grep i810 /proc/cmdline &>/dev/null; then - startx -- -config xorg.conf.i810 - else - startx - fi - - # Maybe there should be some code here to handle a failed startx? - - # The 'return' value is at /tmp/xlogout - # If there is nothing there, switch user to 'newuser' - # If there is also nothing there, login as root - # - if already root, fall through to terminal - - if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then - logout - elif [ ${UID} -ne 0 ]; then - echo "root" >/tmp/newuser - logout - fi -fi diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom deleted file mode 100644 index 5f04171..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom +++ /dev/null @@ -1,4 +0,0 @@ -# Set the keymap -xkmap-set - -exec fluxbox diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf deleted file mode 100644 index 6d11b2e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf +++ /dev/null @@ -1,49 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - Identifier "Card0" - Driver "vesa" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810 deleted file mode 100644 index 9615569..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810 +++ /dev/null @@ -1,59 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "NoAccel" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "ColorKey" # <i> - #Option "CacheLines" # <i> - #Option "Dac6Bit" # [<bool>] - #Option "DRI" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ShowCache" # [<bool>] - #Option "XvMCSurfaces" # <i> - #Option "PageFlip" # [<bool>] - Option "DRI" "False" - #Option "AccelMethod" "exa" - #Option "MigrationHeuristic" "greedy" - #Option "ExaNoComposite" "False" - Identifier "Card0" - Driver "intel" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 deleted file mode 100644 index a295b38..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 +++ /dev/null @@ -1,67 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "NoAccel" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "ColorKey" # <i> - #Option "CacheLines" # <i> - #Option "Dac6Bit" # [<bool>] - #Option "DRI" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ShowCache" # [<bool>] - #Option "XvMCSurfaces" # <i> - #Option "PageFlip" # [<bool>] - Option "DRI" "False" - #Option "AccelMethod" "exa" - #Option "MigrationHeuristic" "greedy" - #Option "ExaNoComposite" "False" - Identifier "Card0" - Driver "intel" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa deleted file mode 100644 index 6d11b2e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa +++ /dev/null @@ -1,49 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - Identifier "Card0" - Driver "vesa" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd deleted file mode 100644 index ab53c30..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd +++ /dev/null @@ -1,6 +0,0 @@ -# -# Arguments to be passed to the DHCP client daemon -# - -DHCPCD_ARGS="-t 10 -h $HOSTNAME" - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps deleted file mode 100644 index 64bb6b7..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps +++ /dev/null @@ -1 +0,0 @@ -30 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf deleted file mode 100644 index ddd88f8..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf +++ /dev/null @@ -1,8 +0,0 @@ -# -# fbsplash.conf -# - -THEMES="linhes" -SPLASH_TTYS="1 2 3 4 5 6" - -#EOF diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps deleted file mode 100644 index 7f8f011..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps +++ /dev/null @@ -1 +0,0 @@ -7 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow deleted file mode 100644 index 19bc4d8..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow +++ /dev/null @@ -1,13 +0,0 @@ -# -# /etc/hosts.allow -# - -ALL: 127.0.0.1 - -# To allow ssh in from anywhere -sshd: ALL - -# To allow ssh in from local net (example) -#sshd: 192.168.178.0/255.255.255.0 - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab deleted file mode 100644 index 39003ed..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab +++ /dev/null @@ -1,43 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:3:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux -c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave deleted file mode 100644 index 2de483f..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave +++ /dev/null @@ -1,43 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:5:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux -c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown deleted file mode 100644 index d614d4b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown +++ /dev/null @@ -1,47 +0,0 @@ -# Functions used by rc.shutdown -# Modified versions for larch live systems - -f_saveclock () -{ - : -} - -f_swapoff () -{ - ############################# Include session saving functions - # . /opt/larch-live/session-save/shutdown2 - # if [ -f /tmp/checkse ]; then - # . /tmp/checkse - #else - # checkse - # fi - - if [ -n "${saving}" ] && ! session_save; then - echo - echo "If you know what you are doing, you may be able to recover" - echo "something from this unpleasant situation." - echo - echo "You may use the command line to investigate further ..." - echo - echo "When finished please enter 'exit', the shutdown process will" - echo "then continue." - sh -i - fi - - ############################# - - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - if [ -n "${ejectdev}" ]; then - echo "Ejecting live CD" - eject ${ejectdev} - echo "sleeping for 6 seconds" - sleep 6 - - fi -} diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options deleted file mode 100644 index 237c390..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options +++ /dev/null @@ -1,352 +0,0 @@ -# /etc/ppp/options -# -# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> -# Modified for Debian by alvar Bray <alvar@meiko.co.uk> -# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> -# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> -# -# To quickly see what options are active in this file, use this command: -# egrep -v '#|^ *$' /etc/ppp/options - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -# ms-dns 192.168.1.1 -# ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -# ms-wins 192.168.1.50 -# ms-wins 192.168.1.51 - -# Run the executable or shell command specified after pppd has -# terminated the link. This script could, for example, issue commands -# to the modem to cause it to hang up if hardware modem control signals -# were not available. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -asyncmap 0 - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -#auth - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Use software flow control (i.e. XON/XOFF) to control the flow of data -# on the serial port. -#xonxoff - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Don't use the modem control lines. -#local - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Don't show the passwords when logging the contents of PAP packets. -# This is the default. -hide-password - -# When logging the contents of PAP packets, this option causes pppd to -# show the password string in the log message. -#show-password - -# Use the modem control lines. On Ultrix, this option implies hardware -# flow control, as for the crtscts option. (This option is not fully -# implemented.) -modem - -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd -# will ask the peer to send packets of no more than <n> bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Disables the default behaviour when no local IP address is specified, -# which is to determine (if possible) the local IP address from the -# hostname. With this option, the peer will have to supply the local IP -# address during IPCP negotiation (unless it specified explicitly on the -# command line or in an options file). -#noipdefault - -# Enables the "passive" option in the LCP. With this option, pppd will -# attempt to initiate a connection; if no reply is received from the -# peer, pppd will then just wait passively for a valid LCP packet from -# the peer (instead of exiting, as it does without this option). -#passive - -# With this option, pppd will not transmit LCP packets to initiate a -# connection until a valid LCP packet is received from the peer (as for -# the "passive" option with old versions of pppd). -#silent - -# Don't request or allow negotiation of any options for LCP and IPCP -# (use default values). -#-all - -# Disable Address/Control compression negotiation (use default, i.e. -# address/control field disabled). -#-ac - -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape -# all control characters). -#-am - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -#-detach - -# Disable IP address negotiation (with this option, the remote IP -# address must be specified with an option on the command line or in -# an options file). -#-ip - -# Disable IPCP negotiation and IP communication. This option should -# only be required if the peer is buggy and gets confused by requests -# from pppd for IPCP negotiation. -#noip - -# Disable magic number negotiation. With this option, pppd cannot -# detect a looped-back line. -#-mn - -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. -# 1500). -#-mru - -# Disable protocol field compression negotiation (use default, i.e. -# protocol field compression disabled). -#-pc - -# Require the peer to authenticate itself using PAP. -#+pap - -# Don't agree to authenticate using PAP. -#-pap - -# Require the peer to authenticate itself using CHAP [Cryptographic -# Handshake Authentication Protocol] authentication. -#+chap - -# Don't agree to authenticate using CHAP. -#-chap - -# Disable negotiation of Van Jacobson style IP header compression (use -# default, i.e. no compression). -#-vj - -# Increase debugging level (same as -d). If this option is given, pppd -# will log the contents of all control packets sent or received in a -# readable form. The packets are logged through syslog with facility -# daemon and level debug. This information can be directed to a file by -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If -# pppd is compiled with extra debugging enabled, it will log messages -# using facility local2 instead of daemon). -#debug - -# Append the domain name <d> to the local host name for authentication -# purposes. For example, if gethostname() returns the name porsche, -# but the fully qualified domain name is porsche.Quotron.COM, you would -# use the domain option to set the domain name to Quotron.COM. -#domain <d> - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu <n> - -# Set the name of the local system for authentication purposes to <n>. -# This is a privileged option. With this option, pppd will use lines in the -# secrets files which have <n> as the second field when looking for a -# secret to use in authenticating the peer. In addition, unless overridden -# with the user option, <n> will be used as the name to send to the peer -# when authenticating the local system to the peer. (Note that pppd does -# not append the domain name to <n>.) -#name <n> - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -#usehostname - -# Set the assumed name of the remote system for authentication purposes -# to <n>. -#remotename <n> - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -# login - -# If this option is given, pppd will send an LCP echo-request frame to the -# peer every n seconds. Normally the peer should respond to the echo-request -# by sending an echo-reply. This option can be used with the -# lcp-echo-failure option to detect that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Set the LCP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#lcp-restart <n> - -# Set the maximum number of LCP terminate-request transmissions to <n> -# (default 3). -#lcp-max-terminate <n> - -# Set the maximum number of LCP configure-request transmissions to <n> -# (default 10). -#lcp-max-configure <n> - -# Set the maximum number of LCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#lcp-max-failure <n> - -# Set the IPCP restart interval (retransmission timeout) to <n> -# seconds (default 3). -#ipcp-restart <n> - -# Set the maximum number of IPCP terminate-request transmissions to <n> -# (default 3). -#ipcp-max-terminate <n> - -# Set the maximum number of IPCP configure-request transmissions to <n> -# (default 10). -#ipcp-max-configure <n> - -# Set the maximum number of IPCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#ipcp-max-failure <n> - -# Set the PAP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#pap-restart <n> - -# Set the maximum number of PAP authenticate-request transmissions to -# <n> (default 10). -#pap-max-authreq <n> - -# Set the maximum time that pppd will wait for the peer to authenticate -# itself with PAP to <n> seconds (0 means no limit). -#pap-timeout <n> - -# Set the CHAP restart interval (retransmission timeout for -# challenges) to <n> seconds (default 3). -#chap-restart <n> - -# Set the maximum number of CHAP challenge transmissions to <n> -# (default 10). -#chap-max-challenge - -# If this option is given, pppd will rechallenge the peer every <n> -# seconds. -#chap-interval <n> - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Disable the IPXCP and IPX protocols. -# To let pppd pass IPX packets comment this out --- you'll probably also -# want to install ipxripd, and have the Internal IPX Network option enabled -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. -noipx - -# Exit once a connection has been made and terminated. This is the default, -# unless the `persist' or `demand' option has been specified. -#nopersist - -# Do not exit after a connection is terminated; instead try to reopen -# the connection. -#persist - -# Terminate after n consecutive failed connection attempts. -# A value of 0 means no limit. The default value is 10. -#maxfail <n> - -# Initiate the link only on demand, i.e. when data traffic is present. -# With this option, the remote IP address must be specified by the user on -# the command line or in an options file. Pppd will initially configure -# the interface and enable it for IP traffic without connecting to the peer. -# When traffic is available, pppd will connect to the peer and perform -# negotiation, authentication, etc. When this is completed, pppd will -# commence passing data packets (i.e., IP packets) across the link. -#demand - -# Specifies that pppd should disconnect if the link is idle for <n> seconds. -# The link is idle when no data packets (i.e. IP packets) are being sent or -# received. Note: it is not advisable to use this option with the persist -# option without the demand option. If the active-filter option is given, -# data packets which are rejected by the specified activity filter also -# count as the link being idle. -#idle <n> - -# Specifies how many seconds to wait before re-initiating the link after -# it terminates. This option only has any effect if the persist or demand -# option is used. The holdoff period is not applied if the link was -# terminated because it was idle. -#holdoff <n> - -# Wait for up n milliseconds after the connect script finishes for a valid -# PPP packet from the peer. At the end of this time, or when a valid PPP -# packet is received from the peer, pppd will commence negotiation by -# sending its first LCP packet. The default value is 1000 (1 second). -# This wait period only applies if the connect or pty option is used. -#connect-delay <n> - -# Packet filtering: for more information, see pppd(8) -# Any packets matching the filter expression will be interpreted as link -# activity, and will cause a "demand" connection to be activated, and reset -# the idle connection timer. (idle option) -# The filter expression is akin to that of tcpdump(1) -#active-filter <filter-expression> - -# uncomment the line below this if you use PPPoE -#plugin /usr/lib/pppd/plugins/pppoe.so - -# ---<End of File>--- diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local deleted file mode 100755 index 2d488a2..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local +++ /dev/null @@ -1,93 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local: Local multi-user startup script. -# -. /etc/rc.conf -. /etc/rc.d/functions -. /etc/profile -. ${MV_ROOT}/bin/install_functions.sh - -function mysql_check { - mysql -e "show databases;" 2>/dev/null >/dev/null - return $? -} - -function mythconverg_check { - mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null - return $? -} - -function install_db { - pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null - pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null -} - - - - -#check to see if mysql is running -stat_busy "Checking Mysql" -ATTEMPT=0 -mysql_check && printhl " Installing the initial database" &&install_db -mythconverg_check -status=$? -while [ ! $status = 0 ] -do - ((ATTEMPT=ATTEMPT+1)) - /etc/rc.d/mysqld stop - sleep 2 - /etc/rc.d/mysqld start - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql_check && install_db - mythconverg_check - status=$? - fi - if [ $ATTEMPT = 20 ] - then - printhl " Could not start mysql or install mythconverg within 20 attempts" - printhl " Aborting install" - exit 20 - fi -done -stat_done - -#check network parms -stat_busy "Checking network" -init_network -stat_done - -stat_busy "Probing network" -request_dhcp & -stat_done - -#save some cmdline options -stat_busy "Parsing command line" -parse_cmdline_2_db -bootsplash_setup -stat_done - -#search for remote -stat_busy "Checking for remote" -init_remote -stat_done -printhl "Finished" - - -echo $CMDLINE | grep -qi NoX -if [ $? = 0 ] -then - echo "" - printhl "No auto X option found" - # /usr/bin/chvt 2 -else - /root/startx & -fi - - -# Set up automatically logged in user -if [ -f /.livesys/autologin ]; then - cp /.livesys/autologin /tmp/newuser -fi - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig deleted file mode 100755 index 47b24ef..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local: Local multi-user startup script. -# - -# Restore saved sound volume, etc. -alsactl restore diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown deleted file mode 100755 index 2b5f735..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local.shutdown: Local shutdown script. -# - -# Save sound volume, etc. -alsactl store diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile deleted file mode 100644 index 600bd9b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile +++ /dev/null @@ -1,3 +0,0 @@ -. $HOME/.bashrc - -. /etc/X11/xinit/startx.custom diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc deleted file mode 100644 index fcabce0..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc +++ /dev/null @@ -1,3 +0,0 @@ -alias ls='ls --color=auto' -PS1='[\u@\h \W]\$ ' - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc deleted file mode 100644 index c6febe5..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) -# - -# exec gnome-session -# exec startkde -# exec startxfce4 -# exec icewm -# exec openbox -# exec blackbox -exec fluxbox -# exec ratpoison -# exec dwm diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession deleted file mode 100755 index a16dc0b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# -# ~/.xsession -# -# Executed by xdm/gdm/kdm at login -# - -/bin/bash --login -i ~/.xinitrc - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf deleted file mode 100644 index 35ed579..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf +++ /dev/null @@ -1,79 +0,0 @@ -# Path, X server and arguments (if needed) -# Note: -xauth $authfile is automatically appended -default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin -default_xserver /usr/bin/X -xserver_arguments -nolisten tcp vt07 - -# Commands for halt, login, etc. -halt_cmd /sbin/shutdown -h now -reboot_cmd /sbin/shutdown -r now -console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login" -#suspend_cmd /usr/sbin/suspend - -# Full path to the xauth binary -xauth_path /usr/bin/xauth - -# Xauth file for server -authfile /var/run/slim.auth - - -# Activate numlock when slim starts. Valid values: on|off -# numlock on - -# Hide the mouse cursor (note: does not work with some WMs). -# Valid values: true|false -# hidecursor false - -# This command is executed after a succesful login. -# you can place the %session and %theme variables -# to handle launching of specific commands in .xinitrc -# depending of chosen session and slim theme -# -# NOTE: if your system does not have bash you need -# to adjust the command according to your preferred shell, -# i.e. for freebsd use: -# login_cmd exec /bin/sh - ~/.xinitrc %session -login_cmd exec /bin/bash -login ~/.xinitrc %session - -# Commands executed when starting and exiting a session. -# They can be used for registering a X11 session with -# sessreg. You can use the %user variable -# -# sessionstart_cmd some command -# sessionstop_cmd some command - -# Start in daemon mode. Valid values: yes | no -# Note that this can overridden by the command line -# option "-d" -# daemon yes - -# Available sessions (first one is the default). -# The current chosen session name is replaced in the login_cmd -# above, so your login command can handle different sessions. -# see the xinitrc.sample file shipped with slim sources -sessions xfce4,icewm,wmaker,blackbox - -# Executed when pressing F11 (requires imagemagick) -screenshot_cmd import -window root /slim.png - -# welcome message. Available variables: %host, %domain -welcome_msg Welcome to %host - -# shutdown / reboot messages -shutdown_msg The system is halting... -reboot_msg The system is rebooting... - -# default user, leave blank or remove this line -# for avoid pre-loading the username. -#default_user simone - -# current theme, use comma separated list to specify a set to -# randomly choose from -current_theme dlarch - -# Lock file -lockfile /var/lock/slim.lock - -# Log file -logfile /var/log/slim.log - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps deleted file mode 100644 index 68fae0a..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps +++ /dev/null @@ -1,2 +0,0 @@ -[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh deleted file mode 100755 index 6acd24a..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/bash -#redirect stderr to stdout, then rediret stdout to file -. /etc/profile -exec 2>&1 -exec > /tmp/mythvantage_install.log -#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 -#keylaunch & -#/usr/bin/tilda & -#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & -export MALLOC_CHECK_=0 -xset s off -xset -dpms -xhost + - -CMDLINE=$(cat /proc/cmdline) -echo $CMDLINE |grep -q nfsroot -NFSROOT=$? -echo $CMDLINE |grep -q clean_upgrade -if [ $? = 0 ] -then - export CLEAN_UPGRADE=YES -else - export CLEAN_UPGRADE=NO -fi -MythVantage -r - -if [ x$NFSROOT = x1 ] -then - unbuffer MythVantage & -else - NETBOOT=YES MythVantage & -fi - -exec fluxbox > /var/log/fluxbox.log 2>&1 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx deleted file mode 100755 index 9274703..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -. /etc/profile - -export USER=root -export HOME=/root - -CMDLINE=$(cat /proc/cmdline) -TEMPVAR=${CMDLINE#*ip=} -IP=${TEMPVAR%% *} -echo $CMDLINE |grep -q vnc -USEVNC=$? - -if [ x$USEVNC = x1 ] -then - $MV_ROOT/bin/xconfig.sh 2>/dev/null - cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install - startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log - else - #VNC - pacman -Sf --noconfirm tightvnc - cd /root - mkdir .vnc - echo mythvantage |vncpasswd -f > /root/.vnc/passwd - chmod 500 /root/.vnc/passwd - rm /root/.vnc/xstartup - ln -s /root/LinHES-install.sh /root/.vnc/xstartup - vncserver -fi |
