summaryrefslogtreecommitdiffstats
path: root/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay
diff options
context:
space:
mode:
Diffstat (limited to 'build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay')
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom22
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom4
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf49
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i81059
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.267
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa49
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd6
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps1
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf8
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps1
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/hosts.allow13
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab43
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave43
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown47
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/ppp/options352
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local93
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig7
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown7
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile3
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc3
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc17
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession10
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/slim.conf79
-rw-r--r--build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps2
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh34
-rwxr-xr-xbuild_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/startx28
26 files changed, 0 insertions, 1047 deletions
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom
deleted file mode 100644
index 8e3ec5e..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom
+++ /dev/null
@@ -1,22 +0,0 @@
-if grep -v nox /proc/cmdline &>/dev/null && \
- [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
- if grep i810 /proc/cmdline &>/dev/null; then
- startx -- -config xorg.conf.i810
- else
- startx
- fi
-
- # Maybe there should be some code here to handle a failed startx?
-
- # The 'return' value is at /tmp/xlogout
- # If there is nothing there, switch user to 'newuser'
- # If there is also nothing there, login as root
- # - if already root, fall through to terminal
-
- if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
- logout
- elif [ ${UID} -ne 0 ]; then
- echo "root" >/tmp/newuser
- logout
- fi
-fi
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
- ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # [<bool>]
- #Option "SWcursor" # [<bool>]
- #Option "ColorKey" # <i>
- #Option "CacheLines" # <i>
- #Option "Dac6Bit" # [<bool>]
- #Option "DRI" # [<bool>]
- #Option "NoDDC" # [<bool>]
- #Option "ShowCache" # [<bool>]
- #Option "XvMCSurfaces" # <i>
- #Option "PageFlip" # [<bool>]
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
- ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # [<bool>]
- #Option "SWcursor" # [<bool>]
- #Option "ColorKey" # <i>
- #Option "CacheLines" # <i>
- #Option "Dac6Bit" # [<bool>]
- #Option "DRI" # [<bool>]
- #Option "NoDDC" # [<bool>]
- #Option "ShowCache" # [<bool>]
- #Option "XvMCSurfaces" # <i>
- #Option "PageFlip" # [<bool>]
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps
deleted file mode 100644
index 64bb6b7..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps
+++ /dev/null
@@ -1 +0,0 @@
-30
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf
deleted file mode 100644
index ddd88f8..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# fbsplash.conf
-#
-
-THEMES="linhes"
-SPLASH_TTYS="1 2 3 4 5 6"
-
-#EOF
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
deleted file mode 100644
index 7f8f011..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
+++ /dev/null
@@ -1 +0,0 @@
-7
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/hosts.allow b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/hosts.allow
deleted file mode 100644
index 19bc4d8..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# /etc/hosts.allow
-#
-
-ALL: 127.0.0.1
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-# To allow ssh in from local net (example)
-#sshd: 192.168.178.0/255.255.255.0
-
-# End of file
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab
deleted file mode 100644
index 39003ed..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:3:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/ppp/options b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local
deleted file mode 100755
index 2d488a2..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-. /etc/rc.conf
-. /etc/rc.d/functions
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-
-function mysql_check {
- mysql -e "show databases;" 2>/dev/null >/dev/null
- return $?
-}
-
-function mythconverg_check {
- mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null
- return $?
-}
-
-function install_db {
- pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null
- pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null
-}
-
-
-
-
-#check to see if mysql is running
-stat_busy "Checking Mysql"
-ATTEMPT=0
-mysql_check && printhl " Installing the initial database" &&install_db
-mythconverg_check
-status=$?
-while [ ! $status = 0 ]
-do
- ((ATTEMPT=ATTEMPT+1))
- /etc/rc.d/mysqld stop
- sleep 2
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql_check && install_db
- mythconverg_check
- status=$?
- fi
- if [ $ATTEMPT = 20 ]
- then
- printhl " Could not start mysql or install mythconverg within 20 attempts"
- printhl " Aborting install"
- exit 20
- fi
-done
-stat_done
-
-#check network parms
-stat_busy "Checking network"
-init_network
-stat_done
-
-stat_busy "Probing network"
-request_dhcp &
-stat_done
-
-#save some cmdline options
-stat_busy "Parsing command line"
-parse_cmdline_2_db
-bootsplash_setup
-stat_done
-
-#search for remote
-stat_busy "Checking for remote"
-init_remote
-stat_done
-printhl "Finished"
-
-
-echo $CMDLINE | grep -qi NoX
-if [ $? = 0 ]
-then
- echo ""
- printhl "No auto X option found"
- # /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
-# Set up automatically logged in user
-if [ -f /.livesys/autologin ]; then
- cp /.livesys/autologin /tmp/newuser
-fi
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig
deleted file mode 100755
index 47b24ef..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-# Restore saved sound volume, etc.
-alsactl restore
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown
deleted file mode 100755
index 2b5f735..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local.shutdown: Local shutdown script.
-#
-
-# Save sound volume, etc.
-alsactl store
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile
deleted file mode 100644
index 600bd9b..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc
deleted file mode 100644
index c6febe5..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/slim.conf b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/slim.conf
deleted file mode 100644
index 35ed579..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver /usr/bin/X
-xserver_arguments -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd /sbin/shutdown -h now
-reboot_cmd /sbin/shutdown -r now
-console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path /usr/bin/xauth
-
-# Xauth file for server
-authfile /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd exec /bin/sh - ~/.xinitrc %session
-login_cmd exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd some command
-# sessionstop_cmd some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg The system is halting...
-reboot_msg The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user simone
-
-# current theme, use comma separated list to specify a set to
-# randomly choose from
-current_theme dlarch
-
-# Lock file
-lockfile /var/lock/slim.lock
-
-# Log file
-logfile /var/log/slim.log
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps
deleted file mode 100644
index 68fae0a..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh
deleted file mode 100755
index 6acd24a..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-#redirect stderr to stdout, then rediret stdout to file
-. /etc/profile
-exec 2>&1
-exec > /tmp/mythvantage_install.log
-#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
-#keylaunch &
-#/usr/bin/tilda &
-#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents &
-export MALLOC_CHECK_=0
-xset s off
-xset -dpms
-xhost +
-
-CMDLINE=$(cat /proc/cmdline)
-echo $CMDLINE |grep -q nfsroot
-NFSROOT=$?
-echo $CMDLINE |grep -q clean_upgrade
-if [ $? = 0 ]
-then
- export CLEAN_UPGRADE=YES
-else
- export CLEAN_UPGRADE=NO
-fi
-MythVantage -r
-
-if [ x$NFSROOT = x1 ]
-then
- unbuffer MythVantage &
-else
- NETBOOT=YES MythVantage &
-fi
-
-exec fluxbox > /var/log/fluxbox.log 2>&1
diff --git a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/startx b/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/startx
deleted file mode 100755
index 9274703..0000000
--- a/build_tools/l7/larch0/profiles/i686-testing-local/rootoverlay/root/startx
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-. /etc/profile
-
-export USER=root
-export HOME=/root
-
-CMDLINE=$(cat /proc/cmdline)
-TEMPVAR=${CMDLINE#*ip=}
-IP=${TEMPVAR%% *}
-echo $CMDLINE |grep -q vnc
-USEVNC=$?
-
-if [ x$USEVNC = x1 ]
-then
- $MV_ROOT/bin/xconfig.sh 2>/dev/null
- cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
- startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log
- else
- #VNC
- pacman -Sf --noconfirm tightvnc
- cd /root
- mkdir .vnc
- echo mythvantage |vncpasswd -f > /root/.vnc/passwd
- chmod 500 /root/.vnc/passwd
- rm /root/.vnc/xstartup
- ln -s /root/LinHES-install.sh /root/.vnc/xstartup
- vncserver
-fi