diff options
Diffstat (limited to 'build_tools/larch8/larch0/profiles/linhes-remote-testing-i686')
37 files changed, 249 insertions, 1007 deletions
diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks index 03f89f0..3972964 100755 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks @@ -142,7 +142,9 @@ pkgconfig taglib #portmap ivtv-utils -dvb-firmware +#disabled due to conflicts with linux-firmware + +#dvb-firmware dbus-python #MythVantage Installer deps @@ -171,7 +173,8 @@ wireless_tools #wlan-ng26 #wlan-ng26-utils zd1211-firmware -hdhomerun +libhdhomerun + #---- LinHES-config LinHES-system diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/bootlines b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/bootlines deleted file mode 100755 index 0005035..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/bootlines +++ /dev/null @@ -1,23 +0,0 @@ -# The information here will be adapted for the bootloader and inserted into its configuration -# file at the place marked '###LARCH' -# This header will be removed. -# Each block must have an empty line before and after it. -# There may be no empty lines within a block. - -comment: -title: Install CD -options: - -comment: -title: Install CD with vesa xorg driver -options: nomodeset xvesa - -comment: Might be useful if there is some trouble with starting xorg -title: Boot to console -options: nox - -#comment: -#title: larch with swap -#options: swap - -# END OF FILE diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/debugsub.cfg b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/debugsub.cfg new file mode 100644 index 0000000..2bb63fd --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/debugsub.cfg @@ -0,0 +1,38 @@ +default vesamenu.c32 +prompt 0 +#timeout 300 +include /boot/isolinux/style.cfg + + +MENU TITLE Debug options menu + + +label linux-nox +MENU LABEL Boot to console (without X windowing) +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img NoX + +label skipTweaker +MENU LABEL LinHES no splashscren no tweaker. +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img no_meth + + +label linux-c2r +MENU LABEL LinHES: copy-to-ram (also activates swap) +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img c2r + +label linux-swap +MENU LABEL LinHES: Use swap +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img swap + +label memtest +MENU LABEL Memory tester +kernel memtest + +label goback +MENU LABEL Back +kernel vesamenu.c32 +append menu isolinux.cfg diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/hardsub.cfg b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/hardsub.cfg new file mode 100644 index 0000000..22d4cd3 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/hardsub.cfg @@ -0,0 +1,50 @@ +default vesamenu.c32 +prompt 0 +#timeout 300 + +include /boot/isolinux/style.cfg + + + +MENU TITLE Systems menu + +label atomic +MENU LABEL LinHES on Atomic Ant! +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart,intel_agp + +#label linux-i810 +#MENU LABEL with Intel i810 driver (DRI disabled) +#kernel vmlinuz26 +#append initrd=larch.img i810 + +label linux-vesa +MENU LABEL Force use of vesa driver +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img forceXvesa + + +label dragon +MENU LABEL Dragon Version 1 +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img type=dragon vga=0x314 quiet splash=silent,theme:linhes console=tty1 + +label dragon2 +MENU LABEL Dragon Version 2 +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img type=dragon2 vga=0x314 quiet splash=silent,theme:linhes console=tty1 + +label ausdragon +MENU LABEL Australian Dragon +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img type=ausdragon vga=0x314 quiet splash=silent,theme:linhes console=tty1 + +label 8400 +MENU LABEL For the Nvidia 8400 chipset. +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart + +label goback +MENU LABEL Back +kernel vesamenu.c32 +append menu isolinux.cfg diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/isolinux.cfg b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/isolinux.cfg new file mode 100644 index 0000000..174f39e --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/isolinux.cfg @@ -0,0 +1,34 @@ +default vesamenu.c32 +include /boot/isolinux/style.cfg + + +prompt 0 +TIMEOUT 300 +TOTALTIMEOUT 9000 + + +MENU TITLE LinHES: The Linux Home Entertainment System + +label linux +MENU LABEL LinHES (default). +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img vga=0x314 quiet splash=silent,theme:linhes console=tty1 + +label linux-nosplash +MENU LABEL LinHES without splash screen. +kernel /boot/vmlinuz26 +append initrd=/boot/larch.img + +label special +MENU LABEL Special Hardware +kernel vesamenu.c32 +append hardsub.cfg + +label debug +MENU LABEL Debug options +kernel vesamenu.c32 +append debugsub.cfg + +label local +menu label Boot from local drive +localboot 0xffff diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/style.cfg b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/style.cfg new file mode 100644 index 0000000..cd6363d --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/style.cfg @@ -0,0 +1,47 @@ + +# Element ANSI Forground Background Shadow +#MENU COLOR screen 37;40 #80ffffff #00000000 std +#MENU COLOR border 30;30 #00000000 #00000000 none +#MENU COLOR title 1;36;44 #c00090f0 #00000000 none +#MENU COLOR unsel 30;40 #ffffffff #ff000000 std +#MENU COLOR hotkey 1;37;44 #ffffffff #00000000 std +#MENU COLOR sel 7;37;40 #e0ffffff #20ff8000 all +#MENU COLOR hotsel 1;7;37;40 #e0ffffff #20ff8000 all +#MENU COLOR disabled 1;30;44 #60cccccc #00000000 std +#MENU COLOR scrollbar 30;44 #40000000 #00000000 std +#MENU COLOR tabmsg 31;40 #90ffff00 #00000000 std +#MENU COLOR cmdmark 1;36;40 #c000ffff #00000000 std +#MENU COLOR cmdline 37;40 #c0ffffff #00000000 std +#MENU COLOR pwdborder 30;47 #80ffffff #20ffffff std +#MENU COLOR pwdheader 31;47 #80ff8080 #20ffffff std +#MENU COLOR pwdentry 30;47 #80ffffff #20ffffff std +#MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std +#MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std +#MENU COLOR help 37;40 #c0ffffff #00000000 std +#MENU COLOR msg07 37;40 #90ffffff #00000000 std + + + +#menu color border 0 #ff0072BB #ff0072BB +menu color border 30;44 #00000000 #00000000 none +#menu color sel 7 #ffebb91c #ff0072BB all +menu color sel 7 #ff000000 #ffebb91c rev +menu color title 0 #ffffffff #ff0072BB +menu color tabmsg 0 #ff000000 #00000000 none +menu color unsel 0 #ffffffff #ff0072BB + +menu color hotsel 0 #ff000000 #ffffffff +menu color hotkey 7 #ffffffff #ff000000 +menu color timeout_msg 0 #fffffff #ffffffff +menu color timeout 0 #fffffff #ffffffff +menu color cmdline 0 #ff000000 #00000000 none + + + +MENU SEPARATOR + +MENU BACKGROUND vbg.jpg +MENU ROWS 10 +MENU CMDLINEROW 17 +MENU TIMEOUTROW 13 +MENU TABMSGROW 17 diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/vbg.jpg b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/vbg.jpg Binary files differnew file mode 100644 index 0000000..0746e1f --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/boot/isolinux/vbg.jpg diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/colors.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/colors.lst deleted file mode 100755 index 3f544ce..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/colors.lst +++ /dev/null @@ -1,36 +0,0 @@ -#color schemes - ganked from SGD ( http://freshmeat.net/projects/supergrub/?branch_id=62132&release_id=236631 ) -# TODO change these and make some more... specifically an "arch" theme -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to Main Menu -configfile /boot/grub/menu.lst - -title Barlond -color white/cyan yellow/blue - -title Barlond2 -color white/blue yellow/cyan - -title Simple Black -color light-gray/black yellow/blue - -title Matrix -color green/black light-green/green - -title Dalton Bros. -color red/green green/red - -title Debian -color cyan/blue white/blue - -title BW -color light-gray/black black/light-gray - -title BW Inverse -color black/light-gray - -title SGD Non Default -color black/cyan yellow/black diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help.lst deleted file mode 100755 index 6e74187..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help.lst +++ /dev/null @@ -1,16 +0,0 @@ -# Help files must be exactly 23 lines long. -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to main menu -configfile /boot/grub/menu.lst - -title HOW-TO: Boot an existing system -cat /boot/grub/help/bootexisting.txt -pause Press enter to continue... - -title HOW-TO: Contribute to this help -cat /boot/grub/help/contrib.txt -pause Press enter to continue... diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/bootexisting.txt b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/bootexisting.txt deleted file mode 100755 index 881f3e8..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/bootexisting.txt +++ /dev/null @@ -1,23 +0,0 @@ -HOWTO: Boot an existing install - -Select "More Options" from the main menu. -Move the cursor to "[EDIT ME] Boot an existing linux install" -Press "e" - -At this point you will see the following: - root (hd0,0) - kernel /vmlinuz26 root=/dev/hda3 ro - initrd /kernel26.img - -This needs to be changed to accomodate your hardware. - -The first line should be changed to indicate where your boot medium resides. - "(hd0,0)" is the first partition on the first hard drive (hda1) - change these - numbers to indicate the partition containing your /boot directory. - -The second line should be changed to point to your kernel. If the line above -points to a partition _only_ containing /boot, then /vmlinuz26 is fine. -Otherwise, change this to /boot/vmlinuz. root= should be changed to match the -partition for your root filesystem. Other kernel parameters can be added here. - - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/contrib.txt b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/contrib.txt deleted file mode 100755 index 5c79176..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/contrib.txt +++ /dev/null @@ -1,23 +0,0 @@ -HOWTO: Contribute to these help files - -This help is rather simplistic. -In order to provide help files or translations you simply need to make a text -file. Formatting is important (due to grub limitations). The files MUST be 80 -characters wide, and 23 lines long. Any more, and your formatting will be -corrupted when viewing the help. Please note that if your help is short, it is -worthwhile to pad with empty lines, up to 23 lines. - - - - - - - - - - - - - - - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/keyboards.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/keyboards.lst deleted file mode 100755 index 5237c1a..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/keyboards.lst +++ /dev/null @@ -1,111 +0,0 @@ -#keyboard layouts - ganked from SGD ( http://freshmeat.net/projects/supergrub/?branch_id=62132&release_id=236631 ) -# TODO add other languages -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to Main Menu -configfile /boot/grub/menu.lst - -title Default layout -setkey - -title German layout -setkey y z -setkey z y -setkey Y Z -setkey Z Y -setkey equal parenright -setkey parenright parenleft -setkey parenleft asterisk -setkey doublequote at -setkey plus bracketright -setkey minus slash -setkey slash ampersand -setkey ampersand percent -setkey percent caret -setkey underscore question -setkey question underscore -setkey semicolon less -setkey less numbersign -setkey numbersign backslash -setkey colon greater -setkey greater bar -setkey asterisk braceright - - -title Spanish layout -setkey -setkey slash ampersand -setkey ampersand caret -setkey caret braceleft -setkey asterisk braceright -setkey parenleft asterisk -setkey parenright parenleft -setkey minus slash -setkey equal parenright -setkey quote minus -setkey underscore question -setkey question underscore -setkey braceleft quote -setkey braceright backslash -setkey colon greater -setkey greater bar -setkey doublequote at -setkey backslash backquote -setkey less backslash -setkey semicolon less -setkey plus colon -setkey at semicolon - -title French layout -setkey -setkey less backquote -setkey greater tilde -setkey ampersand 1 -setkey 1 exclam -setkey tilde 2 -setkey 2 at -setkey doublequote 3 -setkey 3 numbersign -setkey quote 4 -setkey 4 dollar -setkey parenleft 5 -setkey 5 percent -setkey minus 6 -setkey 6 caret -setkey backquote 7 -setkey 7 ampersand -setkey underscore 8 -setkey 8 asterisk -setkey backslash 9 -setkey 9 parenleft -setkey at 0 -setkey 0 parenright -setkey parenright minus -setkey numbersign underscore -setkey a q -setkey A Q -setkey z w -setkey Z W -setkey caret bracketleft -setkey dollar bracketright -setkey q a -setkey Q A -setkey m semicolon -setkey M colon -setkey bracketleft quote -setkey percent doublequote -setkey asterisk backslash -setkey bracketright bar -setkey w z -setkey W Z -setkey comma m -setkey question M -setkey semicolon comma -setkey period less -setkey colon period -setkey slash greater -setkey exclam slash -setkey bar question diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/menu.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/menu.lst deleted file mode 100755 index 60216f8..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/menu.lst +++ /dev/null @@ -1,26 +0,0 @@ -timeout 5 -default 0 -#color light-blue/blue light-cyan/blue -#black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -###LARCH - -title Tools... -configfile /boot/grub/tools.lst - -title Grub Settings... -configfile /boot/grub/settings.lst - -title View Help... -configfile /boot/grub/help.lst - -title More Options... -configfile /boot/grub/more.lst - -title Shutdown the Computer -halt - -title JMS Reboot the Computer -reboot - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/more.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/more.lst deleted file mode 100755 index 8fd5f7e..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/more.lst +++ /dev/null @@ -1,30 +0,0 @@ -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to Main Menu -configfile /boot/grub/menu.lst - -title [EXPERIMENTAL] Attempt existing Linux detection -configfile /boot/grub/tryboot.lst - -title [EDIT ME] Diskless Boot (PXE / BOOTP) -#TODO wtf? -root (nd) -kernel /vmlinuz26 ip=dhcp root=/dev/nfs nfsroot=192.168.1.2:/boot/dir - -title [EDIT ME] NFS Root Boot -root (cd) -kernel /vmlinuz26 ip=dhcp root=/dev/nfs nfsroot=192.168.1.2:/boot/dir - -title [EDIT ME] Boot Existing Linux Install -root (hd0,0) -kernel /vmlinuz26 root=/dev/hda3 ro -initrd /kernel26.img - -title [EDIT ME] Boot Existing Windows Install -rootnoverify (hd0,0) -makeactive -chainloader +1 - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/settings.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/settings.lst deleted file mode 100755 index f8f8c95..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/settings.lst +++ /dev/null @@ -1,13 +0,0 @@ -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to Main Menu -configfile /boot/grub/menu.lst - -title Keyboard settings -configfile /boot/grub/keyboards.lst - -title Color settings -configfile /boot/grub/colors.lst diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/tools.lst b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/tools.lst deleted file mode 100755 index d226992..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/tools.lst +++ /dev/null @@ -1,14 +0,0 @@ -timeout 300 -default 0 -color light-blue/blue black/light-grey -splashimage=/boot/grub/splash.xpm.gz - -title << Back to Main Menu -configfile /boot/grub/menu.lst - -title Run memtest (Memory Testing) -kernel /boot/memtest - -title Install GRUB to hd0 MBR -root (hd0,0) -setup (hd0) diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/actions.rc b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/actions.rc deleted file mode 100755 index dd95b26..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/actions.rc +++ /dev/null @@ -1,3 +0,0 @@ -type=0 -orientation=1 - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/autologin b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/autologin deleted file mode 100755 index 93ca142..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/autologin +++ /dev/null @@ -1 +0,0 @@ -root
\ No newline at end of file diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/delarch b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/delarch deleted file mode 100755 index 108c1a4..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/delarch +++ /dev/null @@ -1,63 +0,0 @@ -# This is a script called from the installation script fix-system2. -# Its purpose is to remove custom live-only stuff from a just-installed -# system. - -# $1 is the path to the installed system root directory. - -INSTALL=$1 -if [ -z "${INSTALL}" ] || [ ! -f /etc/rc.conf ]; then - echo "ERROR: delarch installation adjustments failed:" - echo " Please check installation mount point (${INSTALL})" - exit 1 -fi - -rm -f "${INSTALL}/root/Desktop/Install Arch Linux.desktop" -rm -f "${INSTALL}/etc/rc.d/functions.d/larch-autologin" - -if [ -f ${INSTALL}/etc/rc.local.orig ]; then - mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local -fi -if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then - mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown -fi - -# start gdm from rc.conf -sed -i '/^DAEMONS=/ s|!gdm|@gdm|' ${INSTALL}/etc/rc.conf - -#***************************************************# -# Replace uses of larchquit in xfce panels and menu.# -#***************************************************# -### Unfortunately this isn't very simple. If anyone has a better way of -### providing different Quit actions in the live version and the version -### installed to disk from it, please let me know! -### Maybe it would be better just to provide a special live quit desktop -### icon which can be removed on installation, like the installation icon. - -defaultquit='<builtin name="Quit" cmd="Quit" icon="gnome-logout"/>' - -replacequit () -{ - for f in ${INSTALL}$1/.config/xfce4/panel/*; do - if grep "^Exec=larchquit" ${f}; then - n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" ) - cp /.livesys/actions.rc \ - ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc - rm ${f} - - sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \ - ${INSTALL}$1/.config/xfce4/panel/panels.xml - fi - done - - if [ -f ${INSTALL}$1/.bash_profile ]; then - rm -f ${INSTALL}$1/.local/share/applications/xfce4-logout.desktop - - cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile - fi -} - -for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \ - /root /etc/skel; do - replacequit ${hd} &>/dev/null -done -#***************************************************# diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/delarch b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/delarch new file mode 100644 index 0000000..71babb8 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/delarch @@ -0,0 +1,24 @@ +# This is a script called from the installation script fix-system2. +# Its purpose is to remove custom live-only stuff from a just-installed +# system. + +# $1 is the path to the installed system root directory. + +INSTALL=$1 +if [ -z "${INSTALL}" ] || [ ! -f /etc/rc.conf ]; then + echo "ERROR: delarch installation adjustments failed:" + echo " Please check installation mount point (${INSTALL})" + exit 1 +fi + +rm -f "${INSTALL}/root/Desktop/Install Arch Linux.desktop" +rm -f "${INSTALL}/root/Desktop/Larch Documentation.desktop" + +sed "s|^autologin|#autologin|" -i "${INSTALL}/etc.schlim.conf" + +if [ -f ${INSTALL}/etc/rc.local.orig ]; then + mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local +fi +if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then + mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown +fi diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.options b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.options new file mode 100644 index 0000000..d71f787 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.options @@ -0,0 +1,38 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +CacheDir = /data/var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +HoldPkg = pacman glibc +# If upgrades are available for these packages they will be asked for first +SyncFirst = pacman +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#XferCommand = /usr/bin/curl -C - %u > %o +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options (all disabled by default) +#UseSyslog +#ShowSize +#UseDelta +#TotalDownload + +# + diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.repos b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.repos index 16f4842..0aa3c75 100755 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.repos +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/pacman.conf.repos @@ -7,7 +7,7 @@ # You can add your own custom repositories (anywhere). #larch: Server = ftp://ftp.berlios.de/pub/larch/larch7.2/*platform* -larch: Server = http://linhes.org/repo/larch +larch: Server = http://linhes.org/repo//larch/larch8/i686 core-testing: Server = http://localmirror/repo/i686/core-testing extra-testing: Server = http://localmirror/repo/i686/extra-testing diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd index ab53c30..ab53c30 100755..100644 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow index 19bc4d8..f8cc8f5 100755..100644 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow @@ -5,7 +5,7 @@ ALL: 127.0.0.1 # To allow ssh in from anywhere -sshd: ALL +#sshd: ALL # To allow ssh in from local net (example) #sshd: 192.168.178.0/255.255.255.0 diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larch.orig index b2364fc..4b5bb7a 100755..100644 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larch.orig @@ -24,14 +24,17 @@ rh:06:wait:/etc/rc.shutdown su:S:wait:/sbin/sulogin -p # -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/ulogin +c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/loginroot c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux +c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux +c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux +c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux ca::ctrlaltdel:/sbin/shutdown -t3 -r now # Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon +x:5:respawn:/usr/bin/xdm -nodaemon #x:5:respawn:/usr/sbin/gdm -nodaemon #x:5:respawn:/opt/kde/bin/kdm -nodaemon #x:5:respawn:/usr/bin/slim >& /dev/null diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave deleted file mode 100755 index 2de483f..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave +++ /dev/null @@ -1,43 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:5:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux -c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown deleted file mode 100755 index d614d4b..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown +++ /dev/null @@ -1,47 +0,0 @@ -# Functions used by rc.shutdown -# Modified versions for larch live systems - -f_saveclock () -{ - : -} - -f_swapoff () -{ - ############################# Include session saving functions - # . /opt/larch-live/session-save/shutdown2 - # if [ -f /tmp/checkse ]; then - # . /tmp/checkse - #else - # checkse - # fi - - if [ -n "${saving}" ] && ! session_save; then - echo - echo "If you know what you are doing, you may be able to recover" - echo "something from this unpleasant situation." - echo - echo "You may use the command line to investigate further ..." - echo - echo "When finished please enter 'exit', the shutdown process will" - echo "then continue." - sh -i - fi - - ############################# - - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - if [ -n "${ejectdev}" ]; then - echo "Ejecting live CD" - eject ${ejectdev} - echo "sleeping for 6 seconds" - sleep 6 - - fi -} diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/locale.gen b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/locale.gen new file mode 100644 index 0000000..3bceedc --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/locale.gen @@ -0,0 +1,6 @@ +# locales for larch (/etc/locale.gen) + +en_US.UTF-8 UTF-8 +en_GB.UTF-8 UTF-8 +de_DE.UTF-8 UTF-8 + diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch deleted file mode 100755 index 0a9b572..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch +++ /dev/null @@ -1,65 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES="piix ide_disk reiserfs" -MODULES="" - -# BINARIES -# This setting includes, into the CPIO image, and additional -# binaries a given user may wish. This is run first, so may -# be used to override the actual binaries used in a given hook. -# (Existing files are NOT overwritten is already added) -# BINARIES are dependancy parsed, so you may safely ignore libraries -BINARIES="" - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in anyway. This is useful for config files. -# Some users may wish to include modprobe.conf for custom module options, -# like so: -# FILES="/etc/modprobe.conf" -FILES="" - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -# This setup specifies all modules in the MODULES setting above. -# No raid, lvm2, or encrypted root is needed. -# HOOKS="base" -# -# This setup will autodetect all modules for your system and should -# work as a sane default -# HOOKS="base udev autodetect pata scsi sata filesystems" -# -# This is identical to the above, except the old ide subsystem is -# used for IDE devices instead of the new pata subsystem. -# HOOKS="base udev autodetect ide scsi sata filesystems" -# -# This setup will generate a 'full' image which supports most systems. -# No autodetection is done. -# HOOKS="base udev pata scsi sata usb filesystems" -# -# This setup assembles an pata raid array with an encrypted root FS. -# Note: See 'mkinitcpio -H raid' for more information on raid devices. -# HOOKS="base udev pata raid encrypt filesystems" -# -# This setup loads an lvm2 volume group on a usb device. -# HOOKS="base udev usb lvm2 filesystems" -HOOKS="base udev autodetect pata scsi sata filesystems larch1 larch2_aufs larch3 fbsplash" - -# COMPRESSION -# Use this to compress the initramfs image. With kernels earlier than -# 2.6.30, only gzip is supported, which is also the default. Newer kernels -# support gzip, bzip2 and lzma. -#COMPRESSION="gzip" -#COMPRESSION="bzip2" -#COMPRESSION="lzma" diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options deleted file mode 100755 index 237c390..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options +++ /dev/null @@ -1,352 +0,0 @@ -# /etc/ppp/options -# -# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> -# Modified for Debian by alvar Bray <alvar@meiko.co.uk> -# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> -# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> -# -# To quickly see what options are active in this file, use this command: -# egrep -v '#|^ *$' /etc/ppp/options - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -# ms-dns 192.168.1.1 -# ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -# ms-wins 192.168.1.50 -# ms-wins 192.168.1.51 - -# Run the executable or shell command specified after pppd has -# terminated the link. This script could, for example, issue commands -# to the modem to cause it to hang up if hardware modem control signals -# were not available. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -asyncmap 0 - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -#auth - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Use software flow control (i.e. XON/XOFF) to control the flow of data -# on the serial port. -#xonxoff - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Don't use the modem control lines. -#local - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Don't show the passwords when logging the contents of PAP packets. -# This is the default. -hide-password - -# When logging the contents of PAP packets, this option causes pppd to -# show the password string in the log message. -#show-password - -# Use the modem control lines. On Ultrix, this option implies hardware -# flow control, as for the crtscts option. (This option is not fully -# implemented.) -modem - -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd -# will ask the peer to send packets of no more than <n> bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Disables the default behaviour when no local IP address is specified, -# which is to determine (if possible) the local IP address from the -# hostname. With this option, the peer will have to supply the local IP -# address during IPCP negotiation (unless it specified explicitly on the -# command line or in an options file). -#noipdefault - -# Enables the "passive" option in the LCP. With this option, pppd will -# attempt to initiate a connection; if no reply is received from the -# peer, pppd will then just wait passively for a valid LCP packet from -# the peer (instead of exiting, as it does without this option). -#passive - -# With this option, pppd will not transmit LCP packets to initiate a -# connection until a valid LCP packet is received from the peer (as for -# the "passive" option with old versions of pppd). -#silent - -# Don't request or allow negotiation of any options for LCP and IPCP -# (use default values). -#-all - -# Disable Address/Control compression negotiation (use default, i.e. -# address/control field disabled). -#-ac - -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape -# all control characters). -#-am - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -#-detach - -# Disable IP address negotiation (with this option, the remote IP -# address must be specified with an option on the command line or in -# an options file). -#-ip - -# Disable IPCP negotiation and IP communication. This option should -# only be required if the peer is buggy and gets confused by requests -# from pppd for IPCP negotiation. -#noip - -# Disable magic number negotiation. With this option, pppd cannot -# detect a looped-back line. -#-mn - -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. -# 1500). -#-mru - -# Disable protocol field compression negotiation (use default, i.e. -# protocol field compression disabled). -#-pc - -# Require the peer to authenticate itself using PAP. -#+pap - -# Don't agree to authenticate using PAP. -#-pap - -# Require the peer to authenticate itself using CHAP [Cryptographic -# Handshake Authentication Protocol] authentication. -#+chap - -# Don't agree to authenticate using CHAP. -#-chap - -# Disable negotiation of Van Jacobson style IP header compression (use -# default, i.e. no compression). -#-vj - -# Increase debugging level (same as -d). If this option is given, pppd -# will log the contents of all control packets sent or received in a -# readable form. The packets are logged through syslog with facility -# daemon and level debug. This information can be directed to a file by -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If -# pppd is compiled with extra debugging enabled, it will log messages -# using facility local2 instead of daemon). -#debug - -# Append the domain name <d> to the local host name for authentication -# purposes. For example, if gethostname() returns the name porsche, -# but the fully qualified domain name is porsche.Quotron.COM, you would -# use the domain option to set the domain name to Quotron.COM. -#domain <d> - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu <n> - -# Set the name of the local system for authentication purposes to <n>. -# This is a privileged option. With this option, pppd will use lines in the -# secrets files which have <n> as the second field when looking for a -# secret to use in authenticating the peer. In addition, unless overridden -# with the user option, <n> will be used as the name to send to the peer -# when authenticating the local system to the peer. (Note that pppd does -# not append the domain name to <n>.) -#name <n> - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -#usehostname - -# Set the assumed name of the remote system for authentication purposes -# to <n>. -#remotename <n> - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -# login - -# If this option is given, pppd will send an LCP echo-request frame to the -# peer every n seconds. Normally the peer should respond to the echo-request -# by sending an echo-reply. This option can be used with the -# lcp-echo-failure option to detect that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Set the LCP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#lcp-restart <n> - -# Set the maximum number of LCP terminate-request transmissions to <n> -# (default 3). -#lcp-max-terminate <n> - -# Set the maximum number of LCP configure-request transmissions to <n> -# (default 10). -#lcp-max-configure <n> - -# Set the maximum number of LCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#lcp-max-failure <n> - -# Set the IPCP restart interval (retransmission timeout) to <n> -# seconds (default 3). -#ipcp-restart <n> - -# Set the maximum number of IPCP terminate-request transmissions to <n> -# (default 3). -#ipcp-max-terminate <n> - -# Set the maximum number of IPCP configure-request transmissions to <n> -# (default 10). -#ipcp-max-configure <n> - -# Set the maximum number of IPCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#ipcp-max-failure <n> - -# Set the PAP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#pap-restart <n> - -# Set the maximum number of PAP authenticate-request transmissions to -# <n> (default 10). -#pap-max-authreq <n> - -# Set the maximum time that pppd will wait for the peer to authenticate -# itself with PAP to <n> seconds (0 means no limit). -#pap-timeout <n> - -# Set the CHAP restart interval (retransmission timeout for -# challenges) to <n> seconds (default 3). -#chap-restart <n> - -# Set the maximum number of CHAP challenge transmissions to <n> -# (default 10). -#chap-max-challenge - -# If this option is given, pppd will rechallenge the peer every <n> -# seconds. -#chap-interval <n> - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Disable the IPXCP and IPX protocols. -# To let pppd pass IPX packets comment this out --- you'll probably also -# want to install ipxripd, and have the Internal IPX Network option enabled -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. -noipx - -# Exit once a connection has been made and terminated. This is the default, -# unless the `persist' or `demand' option has been specified. -#nopersist - -# Do not exit after a connection is terminated; instead try to reopen -# the connection. -#persist - -# Terminate after n consecutive failed connection attempts. -# A value of 0 means no limit. The default value is 10. -#maxfail <n> - -# Initiate the link only on demand, i.e. when data traffic is present. -# With this option, the remote IP address must be specified by the user on -# the command line or in an options file. Pppd will initially configure -# the interface and enable it for IP traffic without connecting to the peer. -# When traffic is available, pppd will connect to the peer and perform -# negotiation, authentication, etc. When this is completed, pppd will -# commence passing data packets (i.e., IP packets) across the link. -#demand - -# Specifies that pppd should disconnect if the link is idle for <n> seconds. -# The link is idle when no data packets (i.e. IP packets) are being sent or -# received. Note: it is not advisable to use this option with the persist -# option without the demand option. If the active-filter option is given, -# data packets which are rejected by the specified activity filter also -# count as the link being idle. -#idle <n> - -# Specifies how many seconds to wait before re-initiating the link after -# it terminates. This option only has any effect if the persist or demand -# option is used. The holdoff period is not applied if the link was -# terminated because it was idle. -#holdoff <n> - -# Wait for up n milliseconds after the connect script finishes for a valid -# PPP packet from the peer. At the end of this time, or when a valid PPP -# packet is received from the peer, pppd will commence negotiation by -# sending its first LCP packet. The default value is 1000 (1 second). -# This wait period only applies if the connect or pty option is used. -#connect-delay <n> - -# Packet filtering: for more information, see pppd(8) -# Any packets matching the filter expression will be interpreted as link -# activity, and will cause a "demand" connection to be activated, and reset -# the idle connection timer. (idle option) -# The filter expression is akin to that of tcpdump(1) -#active-filter <filter-expression> - -# uncomment the line below this if you use PPPoE -#plugin /usr/lib/pppd/plugins/pppoe.so - -# ---<End of File>--- diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile deleted file mode 100755 index 600bd9b..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile +++ /dev/null @@ -1,3 +0,0 @@ -. $HOME/.bashrc - -. /etc/X11/xinit/startx.custom diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc deleted file mode 100755 index c6febe5..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) -# - -# exec gnome-session -# exec startkde -# exec startxfce4 -# exec icewm -# exec openbox -# exec blackbox -exec fluxbox -# exec ratpoison -# exec dwm diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession deleted file mode 100755 index a16dc0b..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# -# ~/.xsession -# -# Executed by xdm/gdm/kdm at login -# - -/bin/bash --login -i ~/.xinitrc - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf deleted file mode 100755 index 35ed579..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf +++ /dev/null @@ -1,79 +0,0 @@ -# Path, X server and arguments (if needed) -# Note: -xauth $authfile is automatically appended -default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin -default_xserver /usr/bin/X -xserver_arguments -nolisten tcp vt07 - -# Commands for halt, login, etc. -halt_cmd /sbin/shutdown -h now -reboot_cmd /sbin/shutdown -r now -console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login" -#suspend_cmd /usr/sbin/suspend - -# Full path to the xauth binary -xauth_path /usr/bin/xauth - -# Xauth file for server -authfile /var/run/slim.auth - - -# Activate numlock when slim starts. Valid values: on|off -# numlock on - -# Hide the mouse cursor (note: does not work with some WMs). -# Valid values: true|false -# hidecursor false - -# This command is executed after a succesful login. -# you can place the %session and %theme variables -# to handle launching of specific commands in .xinitrc -# depending of chosen session and slim theme -# -# NOTE: if your system does not have bash you need -# to adjust the command according to your preferred shell, -# i.e. for freebsd use: -# login_cmd exec /bin/sh - ~/.xinitrc %session -login_cmd exec /bin/bash -login ~/.xinitrc %session - -# Commands executed when starting and exiting a session. -# They can be used for registering a X11 session with -# sessreg. You can use the %user variable -# -# sessionstart_cmd some command -# sessionstop_cmd some command - -# Start in daemon mode. Valid values: yes | no -# Note that this can overridden by the command line -# option "-d" -# daemon yes - -# Available sessions (first one is the default). -# The current chosen session name is replaced in the login_cmd -# above, so your login command can handle different sessions. -# see the xinitrc.sample file shipped with slim sources -sessions xfce4,icewm,wmaker,blackbox - -# Executed when pressing F11 (requires imagemagick) -screenshot_cmd import -window root /slim.png - -# welcome message. Available variables: %host, %domain -welcome_msg Welcome to %host - -# shutdown / reboot messages -shutdown_msg The system is halting... -reboot_msg The system is rebooting... - -# default user, leave blank or remove this line -# for avoid pre-loading the username. -#default_user simone - -# current theme, use comma separated list to specify a set to -# randomly choose from -current_theme dlarch - -# Lock file -lockfile /var/lock/slim.lock - -# Log file -logfile /var/log/slim.log - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/bash_profile b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.bash_profile index c49349b..c49349b 100755..100644 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/bash_profile +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.bash_profile diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.bashrc index fcabce0..3e5c29c 100755..100644 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.bashrc @@ -1,3 +1,2 @@ alias ls='ls --color=auto' PS1='[\u@\h \W]\$ ' - diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps deleted file mode 100755 index 68fae0a..0000000 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps +++ /dev/null @@ -1,2 +0,0 @@ -[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} - |
