diff options
Diffstat (limited to 'build_tools')
8 files changed, 363 insertions, 6 deletions
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/addedpacks b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/addedpacks index 21c6359..7c1f75e 100755 --- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/addedpacks +++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/addedpacks @@ -142,9 +142,8 @@ pkgconfig taglib #portmap ivtv-utils -#disabled due to conflicts with linux-firmware -#dvb-firmware +dvb-firmware dbus-python #MythVantage Installer deps diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 new file mode 100644 index 0000000..b500db2 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 @@ -0,0 +1,72 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="nfs" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run first, so it may be used to +# override the actual binaries used in a given hook. +# (Existing files are NOT overwritten if already added) +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options +# like so: +# FILES="/etc/modprobe.d/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +## This is identical to the above, except the old ide subsystem is +## used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev pata mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev usb net autodetect pata scsi sata filesystems usbinput fbsplash larch" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz +# compression. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 b/build_tools/larch8/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 new file mode 100644 index 0000000..b500db2 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 @@ -0,0 +1,72 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="nfs" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run first, so it may be used to +# override the actual binaries used in a given hook. +# (Existing files are NOT overwritten if already added) +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options +# like so: +# FILES="/etc/modprobe.d/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +## This is identical to the above, except the old ide subsystem is +## used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev pata mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev usb net autodetect pata scsi sata filesystems usbinput fbsplash larch" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz +# compression. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks index 21c6359..7c1f75e 100755 --- a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks +++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks @@ -142,9 +142,8 @@ pkgconfig taglib #portmap ivtv-utils -#disabled due to conflicts with linux-firmware -#dvb-firmware +dvb-firmware dbus-python #MythVantage Installer deps diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 new file mode 100644 index 0000000..b500db2 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 @@ -0,0 +1,72 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="nfs" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run first, so it may be used to +# override the actual binaries used in a given hook. +# (Existing files are NOT overwritten if already added) +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options +# like so: +# FILES="/etc/modprobe.d/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +## This is identical to the above, except the old ide subsystem is +## used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev pata mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev usb net autodetect pata scsi sata filesystems usbinput fbsplash larch" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz +# compression. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 b/build_tools/larch8/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 new file mode 100644 index 0000000..b500db2 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch0 @@ -0,0 +1,72 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="nfs" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run first, so it may be used to +# override the actual binaries used in a given hook. +# (Existing files are NOT overwritten if already added) +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options +# like so: +# FILES="/etc/modprobe.d/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +## This is identical to the above, except the old ide subsystem is +## used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev pata mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev usb net autodetect pata scsi sata filesystems usbinput fbsplash larch" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz +# compression. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks index 21c6359..7c1f75e 100755 --- a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/addedpacks @@ -142,9 +142,8 @@ pkgconfig taglib #portmap ivtv-utils -#disabled due to conflicts with linux-firmware -#dvb-firmware +dvb-firmware dbus-python #MythVantage Installer deps diff --git a/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 new file mode 100644 index 0000000..b500db2 --- /dev/null +++ b/build_tools/larch8/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch0 @@ -0,0 +1,72 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="nfs" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run first, so it may be used to +# override the actual binaries used in a given hook. +# (Existing files are NOT overwritten if already added) +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options +# like so: +# FILES="/etc/modprobe.d/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +## This is identical to the above, except the old ide subsystem is +## used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev pata mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev usb net autodetect pata scsi sata filesystems usbinput fbsplash larch" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz +# compression. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" |