From f51fb708846d13222bd97b3f760eb3be902c0be0 Mon Sep 17 00:00:00 2001
From: James Meyer
Date: Sat, 4 Dec 2010 23:44:45 +0000
Subject: remove old versions of larch 6 and 7
---
build_tools/clarch/bootusb/bootinst.sh | 61 -
build_tools/clarch/bootusb/lilo | Bin 70196 -> 0 bytes
build_tools/clarch/cachepacs | 1 -
build_tools/clarch/inpacs | 1 -
build_tools/clarch/larch-setup | 125 -
build_tools/clarch/larch/buildlive | 538 -
.../clarch/larch/cd-root/boot/grub/colors.lst | 36 -
.../clarch/larch/cd-root/boot/grub/help.lst | 16 -
.../clarch/larch/cd-root/boot/grub/keyboards.lst | 111 -
.../clarch/larch/cd-root/boot/grub/menu.lst | 27 -
.../clarch/larch/cd-root/boot/grub/more.lst | 30 -
.../clarch/larch/cd-root/boot/grub/settings.lst | 13 -
.../clarch/larch/cd-root/boot/grub/tools.lst | 23 -
.../larch/cd-root/boot/help/bootexisting.txt | 24 -
.../clarch/larch/cd-root/boot/help/contrib.txt | 23 -
.../clarch/larch/cd-root/boot/splash.xpm.gz | Bin 8371 -> 0 bytes
build_tools/clarch/larch/cd-root/isolinux/bkgd.jpg | Bin 96992 -> 0 bytes
.../clarch/larch/cd-root/isolinux/isolinux.cfg | 29 -
build_tools/clarch/larch/cd-root/isolinux/memtest | Bin 111864 -> 0 bytes
.../clarch/larch/cd-root/isolinux/vesamenu.c32 | Bin 123756 -> 0 bytes
build_tools/clarch/larch/cd-root/larch/larchboot | 2 -
build_tools/clarch/larch/cd-root/larch/save | 1 -
build_tools/clarch/larch/docs/CHANGES | 109 -
build_tools/clarch/larch/docs/COPYING | 339 -
build_tools/clarch/larch/docs/LICENCE | 16 -
build_tools/clarch/larch/docs/README | 37 -
build_tools/clarch/larch/docs/ReleaseNotes | 37 -
build_tools/clarch/larch/docs/Splash_howto | 35 -
build_tools/clarch/larch/docs/html/index.html | 128 -
build_tools/clarch/larch/docs/html/larch1.jpg | Bin 8716 -> 0 bytes
.../clarch/larch/docs/html/larch_docindex.html | 126 -
.../clarch/larch/docs/html/larch_features.html | 137 -
.../clarch/larch/docs/html/larch_fstab.html | 87 -
.../clarch/larch/docs/html/larch_intro.html | 128 -
.../clarch/larch/docs/html/larch_live_system.html | 155 -
.../clarch/larch/docs/html/larch_overview.html | 383 -
.../clarch/larch/docs/html/larch_profiles.html | 167 -
.../clarch/larch/docs/html/larch_quick.html | 108 -
.../clarch/larch/docs/html/larch_running.html | 169 -
.../clarch/larch/docs/html/larch_sessionsave.html | 162 -
build_tools/clarch/larch/docs/html/larch_ssh.html | 205 -
build_tools/clarch/larch/profile0/cd-root/README | 8 -
.../larch/profile0/cd-root/isolinux/isolinux.cfg | 29 -
build_tools/clarch/larch/profile0/kernel | 2 -
.../clarch/larch/profiles/MV-local/addedpacks | 151 -
.../clarch/larch/profiles/MV-local/baseveto | 7 -
.../clarch/larch/profiles/MV-local/cache_packs | 39 -
.../MV-local/cd-root/isolinux/isolinux.cfg | 38 -
.../profiles/MV-local/cd-root/isolinux/vbg.jpg | Bin 57322 -> 0 bytes
.../clarch/larch/profiles/MV-local/locale.gen | 8 -
.../clarch/larch/profiles/MV-local/mkinitcpio.conf | 54 -
.../clarch/larch/profiles/MV-local/pacman.conf | 66 -
build_tools/clarch/larch/profiles/MV-local/pkglist | 366 -
.../clarch/larch/profiles/MV-local/post-process.sh | 17 -
.../larch/profiles/MV-local/post_process/fstab | 14 -
.../profiles/MV-local/post_process/functions.patch | 13 -
.../profiles/MV-local/post_process/hosts.allow | 7 -
.../profiles/MV-local/post_process/hosts.deny | 6 -
.../larch/profiles/MV-local/post_process/menu.lst | 55 -
.../profiles/MV-local/post_process/pacman.conf | 64 -
.../larch/profiles/MV-local/post_process/rc.conf | 113 -
.../larch/profiles/MV-local/post_process/rc.local | 21 -
.../profiles/MV-local/post_process/rc.shutdown | 104 -
.../MV-local/post_process/rc.sysinit.patch | 14 -
.../larch/profiles/MV-local/post_process/root | 13 -
.../larch/profiles/MV-local/post_process/securetty | 19 -
.../larch/profiles/MV-local/post_process/tweak.sh | 67 -
build_tools/clarch/larch/profiles/MV-local/rcconfx | 16 -
.../MV-local/rootoverlay/etc/conf.d/dhcpcd | 6 -
.../profiles/MV-local/rootoverlay/etc/hosts.allow | 7 -
.../profiles/MV-local/rootoverlay/etc/inittab | 42 -
.../MV-local/rootoverlay/etc/larch-shutdown | 47 -
.../profiles/MV-local/rootoverlay/etc/ppp/options | 352 -
.../profiles/MV-local/rootoverlay/etc/rc.local | 21 -
.../profiles/MV-local/rootoverlay/root/.bashrc | 2 -
.../larch/profiles/i586-RELEASE-REMOTE/addedpacks | 170 -
.../larch/profiles/i586-RELEASE-REMOTE/cache_packs | 1 -
.../cd-root/isolinux/isolinux.cfg | 49 -
.../i586-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg | Bin 32422 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i586-RELEASE-REMOTE/cd-root/larch/copy/larch0 | 63 -
.../profiles/i586-RELEASE-REMOTE/create_overlay.sh | 1 -
.../larch/profiles/i586-RELEASE-REMOTE/locale.gen | 5 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i586-RELEASE-REMOTE/pacman.conf | 61 -
.../profiles/i586-RELEASE-REMOTE/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 2 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i586-RELEASE-REMOTE/post_process/hosts.allow | 7 -
.../i586-RELEASE-REMOTE/post_process/hosts.deny | 6 -
.../i586-RELEASE-REMOTE/post_process/menu.lst | 60 -
.../i586-RELEASE-REMOTE/post_process/rc.conf | 113 -
.../i586-RELEASE-REMOTE/post_process/rc.shutdown | 104 -
.../i586-RELEASE-REMOTE/post_process/tweak.sh | 32 -
.../profiles/i586-RELEASE-REMOTE/pre-process.sh | 8 -
.../larch/profiles/i586-RELEASE-REMOTE/rcconfx | 19 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/hosts.allow | 13 -
.../i586-RELEASE-REMOTE/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/ppp/options | 352 -
.../i586-RELEASE-REMOTE/rootoverlay/etc/rc.local | 16 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i586-RELEASE-REMOTE/rootoverlay/etc/slim.conf | 79 -
.../larch/profiles/i586-testing-REMOTE/addedpacks | 170 -
.../larch/profiles/i586-testing-REMOTE/cache_packs | 1 -
.../cd-root/isolinux/isolinux.cfg | 49 -
.../i586-testing-REMOTE/cd-root/isolinux/vbg.jpg | Bin 32422 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i586-testing-REMOTE/cd-root/larch/copy/larch0 | 63 -
.../profiles/i586-testing-REMOTE/create_overlay.sh | 1 -
.../larch/profiles/i586-testing-REMOTE/locale.gen | 5 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i586-testing-REMOTE/pacman.conf | 61 -
.../profiles/i586-testing-REMOTE/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 2 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i586-testing-REMOTE/post_process/hosts.allow | 7 -
.../i586-testing-REMOTE/post_process/hosts.deny | 6 -
.../i586-testing-REMOTE/post_process/menu.lst | 60 -
.../i586-testing-REMOTE/post_process/rc.conf | 113 -
.../i586-testing-REMOTE/post_process/rc.shutdown | 104 -
.../i586-testing-REMOTE/post_process/tweak.sh | 32 -
.../profiles/i586-testing-REMOTE/pre-process.sh | 8 -
.../larch/profiles/i586-testing-REMOTE/rcconfx | 19 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/hosts.allow | 13 -
.../i586-testing-REMOTE/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/ppp/options | 352 -
.../i586-testing-REMOTE/rootoverlay/etc/rc.local | 16 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i586-testing-REMOTE/rootoverlay/etc/slim.conf | 79 -
.../larch/profiles/i586-testing-local/addedpacks | 170 -
.../larch/profiles/i586-testing-local/cache_packs | 1 -
.../cd-root/isolinux/isolinux.cfg | 49 -
.../i586-testing-local/cd-root/isolinux/vbg.jpg | Bin 52081 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i586-testing-local/cd-root/larch/copy/larch0 | 63 -
.../profiles/i586-testing-local/create_overlay.sh | 1 -
.../larch/profiles/i586-testing-local/locale.gen | 5 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i586-testing-local/pacman.conf | 59 -
.../profiles/i586-testing-local/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 2 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i586-testing-local/post_process/hosts.allow | 7 -
.../i586-testing-local/post_process/hosts.deny | 6 -
.../i586-testing-local/post_process/menu.lst | 60 -
.../i586-testing-local/post_process/rc.conf | 113 -
.../i586-testing-local/post_process/rc.shutdown | 104 -
.../i586-testing-local/post_process/tweak.sh | 32 -
.../profiles/i586-testing-local/pre-process.sh | 8 -
.../larch/profiles/i586-testing-local/rcconfx | 19 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../i586-testing-local/rootoverlay/etc/hosts.allow | 13 -
.../i586-testing-local/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../i586-testing-local/rootoverlay/etc/ppp/options | 352 -
.../i586-testing-local/rootoverlay/etc/rc.local | 16 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i586-testing-local/rootoverlay/etc/slim.conf | 79 -
.../larch/profiles/i686-RELEASE-REMOTE/addedpacks | 226 -
.../larch/profiles/i686-RELEASE-REMOTE/cache_packs | 59 -
.../cd-root/isolinux/debugsub.cfg | 38 -
.../cd-root/isolinux/hardsub.cfg | 57 -
.../cd-root/isolinux/isolinux.cfg | 37 -
.../i686-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg | Bin 90552 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i686-RELEASE-REMOTE/cd-root/larch/copy/larch0 | 63 -
.../profiles/i686-RELEASE-REMOTE/create_overlay.sh | 1 -
.../larch/profiles/i686-RELEASE-REMOTE/locale.gen | 5 -
.../profiles/i686-RELEASE-REMOTE/mkinitcpio.conf | 54 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i686-RELEASE-REMOTE/pacman.conf | 61 -
.../profiles/i686-RELEASE-REMOTE/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i686-RELEASE-REMOTE/post_process/hosts.allow | 8 -
.../i686-RELEASE-REMOTE/post_process/hosts.deny | 6 -
.../i686-RELEASE-REMOTE/post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../i686-RELEASE-REMOTE/post_process/rc.conf | 112 -
.../i686-RELEASE-REMOTE/post_process/rc.shutdown | 104 -
.../profiles/i686-RELEASE-REMOTE/pre-process.sh | 8 -
.../larch/profiles/i686-RELEASE-REMOTE/rcconfx | 20 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../i686-RELEASE-REMOTE/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/ppp/options | 352 -
.../i686-RELEASE-REMOTE/rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i686-RELEASE-REMOTE/rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../i686-RELEASE-REMOTE/rootoverlay/root/startx | 28 -
.../larch/profiles/i686-testing-REMOTE/addedpacks | 226 -
.../larch/profiles/i686-testing-REMOTE/cache_packs | 59 -
.../cd-root/isolinux/debugsub.cfg | 38 -
.../cd-root/isolinux/hardsub.cfg | 57 -
.../cd-root/isolinux/isolinux.cfg | 37 -
.../i686-testing-REMOTE/cd-root/isolinux/vbg.jpg | Bin 83485 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i686-testing-REMOTE/cd-root/larch/copy/larch0 | 63 -
.../profiles/i686-testing-REMOTE/create_overlay.sh | 1 -
.../larch/profiles/i686-testing-REMOTE/locale.gen | 5 -
.../profiles/i686-testing-REMOTE/mkinitcpio.conf | 54 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i686-testing-REMOTE/pacman.conf | 61 -
.../profiles/i686-testing-REMOTE/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i686-testing-REMOTE/post_process/hosts.allow | 8 -
.../i686-testing-REMOTE/post_process/hosts.deny | 6 -
.../i686-testing-REMOTE/post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../i686-testing-REMOTE/post_process/rc.conf | 112 -
.../i686-testing-REMOTE/post_process/rc.shutdown | 104 -
.../profiles/i686-testing-REMOTE/pre-process.sh | 8 -
.../larch/profiles/i686-testing-REMOTE/rcconfx | 20 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../i686-testing-REMOTE/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/ppp/options | 352 -
.../i686-testing-REMOTE/rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i686-testing-REMOTE/rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../i686-testing-REMOTE/rootoverlay/root/startx | 28 -
.../profiles/i686-testing-local-httpd/addedpacks | 226 -
.../profiles/i686-testing-local-httpd/cache_packs | 59 -
.../cd-root/isolinux/debugsub.cfg | 38 -
.../cd-root/isolinux/hardsub.cfg | 57 -
.../cd-root/isolinux/isolinux.cfg | 37 -
.../cd-root/isolinux/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/larch0 | 63 -
.../i686-testing-local-httpd/create_overlay.sh | 1 -
.../profiles/i686-testing-local-httpd/locale.gen | 5 -
.../i686-testing-local-httpd/mkinitcpio.conf | 54 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../profiles/i686-testing-local-httpd/pacman.conf | 64 -
.../i686-testing-local-httpd/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../i686-testing-local-httpd/post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../i686-testing-local-httpd/post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../i686-testing-local-httpd/pre-process.sh | 8 -
.../profiles/i686-testing-local-httpd/rcconfx | 20 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../larch/profiles/i686-testing-local/addedpacks | 225 -
.../larch/profiles/i686-testing-local/cache_packs | 59 -
.../cd-root/isolinux/debugsub.cfg | 38 -
.../cd-root/isolinux/hardsub.cfg | 57 -
.../cd-root/isolinux/isolinux.cfg | 37 -
.../i686-testing-local/cd-root/isolinux/vbg.jpg | Bin 44071 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../i686-testing-local/cd-root/larch/copy/larch0 | 63 -
.../profiles/i686-testing-local/create_overlay.sh | 1 -
.../larch/profiles/i686-testing-local/locale.gen | 5 -
.../profiles/i686-testing-local/mkinitcpio.conf | 55 -
.../i686-testing-local/mkinitcpio.conf.prel7 | 54 -
.../overlay/home/mythtv/.fluxbox/apps | 2 -
.../overlay/home/mythtv/.xinitrc | 19 -
.../larch/profiles/i686-testing-local/pacman.conf | 62 -
.../profiles/i686-testing-local/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../i686-testing-local/post_process/hosts.allow | 8 -
.../i686-testing-local/post_process/hosts.deny | 6 -
.../i686-testing-local/post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../i686-testing-local/post_process/rc.conf | 112 -
.../i686-testing-local/post_process/rc.shutdown | 104 -
.../profiles/i686-testing-local/pre-process.sh | 8 -
.../larch/profiles/i686-testing-local/rcconfx | 20 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../i686-testing-local/rootoverlay/etc/hosts.allow | 13 -
.../i686-testing-local/rootoverlay/etc/inittab | 43 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../i686-testing-local/rootoverlay/etc/ppp/options | 352 -
.../i686-testing-local/rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.orig | 7 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../i686-testing-local/rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../i686-testing-local/rootoverlay/root/startx | 28 -
build_tools/clarch/larch/run/cachepacs | 140 -
build_tools/clarch/larch/run/gen_repo | 206 -
build_tools/clarch/larch/run/getPackageServer | 275 -
build_tools/clarch/larch/run/inpacs | 302 -
.../clarch/larch/run/jams.cachepacks.larch.patch | 352 -
build_tools/clarch/larch/run/jams.larch.patch | 110 -
build_tools/clarch/larch/run/larchify | 140 -
build_tools/clarch/larch/run/mklarch | 284 -
build_tools/clarch/larch/run/myusbboot | 89 -
build_tools/clarch/larch/run/ssh_init | 18 -
build_tools/clarch/larch/run/usb2bootiso | 66 -
build_tools/clarch/larch/run/usb2iso | 78 -
build_tools/clarch/larch/run/usbboot | 100 -
build_tools/clarch/larch/run/usbboot.orig | 155 -
build_tools/clarch/larch/run/usbboot_grub | 180 -
build_tools/clarch/larch/run/xpack | 122 -
build_tools/clarch/larchify | 1 -
build_tools/clarch/larchroot | 1 -
build_tools/clarch/mklarch | 1 -
build_tools/clarch/remove_links.sh | 5 -
build_tools/clarch/setup_links.sh | 8 -
build_tools/clarch/sync_profile.sh | 13 -
build_tools/clarch/usb2bootiso | 1 -
build_tools/larch7/build_all | 16 -
build_tools/larch7/cachepacs | 140 -
build_tools/larch7/larch | 1 -
build_tools/larch7/larch-7.2.18-1-any.pkg.tar.gz | Bin 483374 -> 0 bytes
build_tools/larch7/larch-archin | 1 -
build_tools/larch7/larch-archin.orig | 378 -
build_tools/larch7/larch-boot_iso | 1 -
build_tools/larch7/larch-larchify | 1 -
build_tools/larch7/larch-larchify.orig | 588 -
build_tools/larch7/larch-live_iso | 1 -
build_tools/larch7/larch-live_part | 1 -
.../larch7/larch-profiles-7.2.0-1-any.pkg.tar.gz | Bin 40510 -> 0 bytes
build_tools/larch7/larch-setup | 127 -
build_tools/larch7/larch0/buildscripts/cleardir | 15 -
build_tools/larch7/larch0/buildscripts/larch-hosts | 28 -
.../larch7/larch0/buildscripts/larch-locales | 45 -
.../larch7/larch0/buildscripts/larch-mbr-grub | 63 -
build_tools/larch7/larch0/cd-root/boot0/memtest | Bin 99784 -> 0 bytes
build_tools/larch7/larch0/cd-root/grub0/colors.lst | 36 -
build_tools/larch7/larch0/cd-root/grub0/help.lst | 16 -
.../larch0/cd-root/grub0/help/bootexisting.txt | 23 -
.../larch7/larch0/cd-root/grub0/help/contrib.txt | 23 -
.../larch7/larch0/cd-root/grub0/keyboards.lst | 111 -
build_tools/larch7/larch0/cd-root/grub0/menu.lst | 25 -
build_tools/larch7/larch0/cd-root/grub0/more.lst | 30 -
.../larch7/larch0/cd-root/grub0/settings.lst | 13 -
build_tools/larch7/larch0/cd-root/grub0/tools.lst | 14 -
.../larch7/larch0/cd-root/isolinux0/bkgd.jpg | Bin 96992 -> 0 bytes
.../larch7/larch0/cd-root/isolinux0/isolinux.cfg | 13 -
build_tools/larch7/larch0/cli/archin.py | 441 -
build_tools/larch7/larch0/cli/archin.py.orig | 378 -
build_tools/larch7/larch0/cli/backend.py | 444 -
build_tools/larch7/larch0/cli/boot_iso.py | 154 -
build_tools/larch7/larch0/cli/config.py | 92 -
build_tools/larch7/larch0/cli/larchify.py | 589 -
build_tools/larch7/larch0/cli/live_iso.py | 154 -
build_tools/larch7/larch0/cli/live_part.py | 221 -
build_tools/larch7/larch0/cli/media_common.py | 450 -
build_tools/larch7/larch0/cli/test.py | 42 -
build_tools/larch7/larch0/cli/userinfo.py | 93 -
build_tools/larch7/larch0/data/bootlines | 20 -
build_tools/larch7/larch0/data/locales | 7 -
build_tools/larch7/larch0/data/pacman.conf | 84 -
build_tools/larch7/larch0/data/pacman.conf.repos | 14 -
build_tools/larch7/larch0/data/requiredpacks | 32 -
build_tools/larch7/larch0/docs/BUGS_TODO | 52 -
build_tools/larch7/larch0/docs/COPYING | 339 -
build_tools/larch7/larch0/docs/LICENCE | 16 -
build_tools/larch7/larch0/docs/README | 23 -
build_tools/larch7/larch0/docs/html/archin.html | 241 -
.../larch7/larch0/docs/html/css/larchdocs.css | 13 -
.../larch7/larch0/docs/html/css/screen/bark.jpg | Bin 57289 -> 0 bytes
.../larch7/larch0/docs/html/css/screen/basemod.css | 162 -
.../larch0/docs/html/css/screen/bottom-left.png | Bin 1187 -> 0 bytes
.../larch0/docs/html/css/screen/bottom-right.png | Bin 421 -> 0 bytes
.../docs/html/css/screen/green-gradient200.jpg | Bin 383 -> 0 bytes
.../larch0/docs/html/css/screen/larch150x.png | Bin 18626 -> 0 bytes
.../larch0/docs/html/css/screen/nav_vlist.css | 74 -
.../larch0/docs/html/css/screen/top-left.png | Bin 1150 -> 0 bytes
.../larch0/docs/html/css/screen/top-right.png | Bin 467 -> 0 bytes
.../larch7/larch0/docs/html/css/yaml/core/base.css | 277 -
.../larch0/docs/html/css/yaml/core/iehacks.css | 355 -
.../docs/html/css/yaml/core/js/webkit-focusfix.js | 40 -
.../larch0/docs/html/css/yaml/core/slim_base.css | 6 -
.../docs/html/css/yaml/core/slim_iehacks.css | 6 -
.../docs/html/css/yaml/print/print_100_draft.css | 75 -
.../docs/html/css/yaml/screen/content_default.css | 221 -
.../larch7/larch0/docs/html/gui_installation.html | 162 -
.../larch7/larch0/docs/html/gui_larchify.html | 187 -
.../larch7/larch0/docs/html/gui_medium.html | 220 -
.../larch7/larch0/docs/html/gui_mediumprofile.html | 117 -
.../larch0/docs/html/gui_project_settings.html | 168 -
build_tools/larch7/larch0/docs/html/index.html | 151 -
.../larch7/larch0/docs/html/larch_features.html | 180 -
build_tools/larch7/larch0/docs/html/larch_gui.html | 82 -
.../larch7/larch0/docs/html/larch_intro.html | 316 -
.../larch7/larch0/docs/html/larch_live_system.html | 220 -
.../larch0/docs/html/larch_quick-console.html | 136 -
.../larch7/larch0/docs/html/larch_quick.html | 148 -
.../larch7/larch0/docs/html/larch_rebuild.html | 100 -
.../larch7/larch0/docs/html/larch_running.html | 216 -
.../larch7/larch0/docs/html/larch_sessionsave.html | 191 -
build_tools/larch7/larch0/docs/html/larch_ssh.html | 212 -
build_tools/larch7/larch0/docs/html/larchify.html | 151 -
build_tools/larch7/larch0/docs/html/medium.html | 142 -
build_tools/larch7/larch0/docs/html/profiles.html | 326 -
build_tools/larch7/larch0/gui/MEDIUM_README | 14 -
build_tools/larch7/larch0/gui/askpass.py | 35 -
build_tools/larch7/larch0/gui/controller.py | 466 -
build_tools/larch7/larch0/gui/dirview.py | 172 -
build_tools/larch7/larch0/gui/dispatcher.py | 108 -
build_tools/larch7/larch0/gui/front/docviewer.py | 68 -
build_tools/larch7/larch0/gui/front/editor.py | 115 -
build_tools/larch7/larch0/gui/front/logview.py | 94 -
build_tools/larch7/larch0/gui/front/mainwindow.py | 132 -
.../larch7/larch0/gui/front/page_installation.py | 188 -
.../larch7/larch0/gui/front/page_larchify.py | 248 -
build_tools/larch7/larch0/gui/front/page_medium.py | 320 -
.../larch7/larch0/gui/front/page_mediumprofile.py | 87 -
.../larch7/larch0/gui/front/page_project.py | 203 -
build_tools/larch7/larch0/gui/front/uim.py | 1327 ---
build_tools/larch7/larch0/gui/larch.py | 38 -
.../larch7/larch0/gui/layouts/docviewer.uim | 72 -
build_tools/larch7/larch0/gui/layouts/editor.uim | 92 -
build_tools/larch7/larch0/gui/layouts/logger.uim | 57 -
.../larch0/gui/layouts/page_installation.uim | 179 -
.../larch7/larch0/gui/layouts/page_larchify.uim | 177 -
.../larch7/larch0/gui/layouts/page_main.uim | 101 -
.../larch7/larch0/gui/layouts/page_medium.uim | 271 -
.../larch0/gui/layouts/page_mediumprofile.uim | 99 -
.../larch7/larch0/gui/layouts/page_project.uim | 181 -
build_tools/larch7/larch0/gui/layouts/progress.uim | 64 -
build_tools/larch7/larch0/gui/project.py | 428 -
.../larch7/larch0/i18n/ca/LC_MESSAGES/ca.po | 1218 --
.../larch7/larch0/i18n/ca/LC_MESSAGES/larch.mo | Bin 26196 -> 0 bytes
.../larch7/larch0/i18n/de/LC_MESSAGES/de.po | 1588 ---
.../larch7/larch0/i18n/de/LC_MESSAGES/larch.mo | Bin 35393 -> 0 bytes
build_tools/larch7/larch0/i18n/i18n.py | 108 -
build_tools/larch7/larch0/i18n/i18n2.py | 51 -
build_tools/larch7/larch0/i18n/larch.pot | 1462 ---
.../larch7/larch0/i18n/zh/LC_MESSAGES/larch.mo | Bin 24434 -> 0 bytes
.../larch7/larch0/i18n/zh/LC_MESSAGES/zh.po | 1231 ---
build_tools/larch7/larch0/images/larch.png | Bin 55248 -> 0 bytes
build_tools/larch7/larch0/images/larch80.png | Bin 6930 -> 0 bytes
build_tools/larch7/larch0/images/larchicon.png | Bin 5175 -> 0 bytes
.../larch7/larch0/profiles/default/addedpacks | 0
.../linhes-local-disk-testing-i686/addedpacks | 229 -
.../linhes-local-disk-testing-i686/bootlines | 23 -
.../linhes-local-disk-testing-i686/cachepacks | 59 -
.../cd-root/grub0/colors.lst | 36 -
.../cd-root/grub0/help.lst | 16 -
.../cd-root/grub0/help/bootexisting.txt | 23 -
.../cd-root/grub0/help/contrib.txt | 23 -
.../cd-root/grub0/keyboards.lst | 111 -
.../cd-root/grub0/menu.lst | 26 -
.../cd-root/grub0/more.lst | 30 -
.../cd-root/grub0/settings.lst | 13 -
.../cd-root/grub0/splash.xpm | 10963 -------------------
.../cd-root/grub0/splash.xpm.gz | Bin 15124 -> 0 bytes
.../cd-root/grub0/tools.lst | 14 -
.../cd-root/grub0/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/delarch | 63 -
.../pacman.conf.repos | 15 -
.../linhes-local-disk-testing-i686/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 5 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../linhes-local-disk-testing-i686/pre-process.sh | 8 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 39 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/mkinitcpio.conf.larch | 65 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.Xdefaults | 2 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../linhes-local-disk-testing-i686/vetopacks | 1 -
.../linhes-local-mirror-stable-i686/addedpacks | 228 -
.../linhes-local-mirror-stable-i686/bootlines | 23 -
.../linhes-local-mirror-stable-i686/cachepacks | 59 -
.../cd-root/grub0/colors.lst | 36 -
.../cd-root/grub0/help.lst | 16 -
.../cd-root/grub0/help/bootexisting.txt | 23 -
.../cd-root/grub0/help/contrib.txt | 23 -
.../cd-root/grub0/keyboards.lst | 111 -
.../cd-root/grub0/menu.lst | 26 -
.../cd-root/grub0/more.lst | 30 -
.../cd-root/grub0/settings.lst | 13 -
.../cd-root/grub0/splash.xpm | 10963 -------------------
.../cd-root/grub0/splash.xpm.gz | Bin 16501 -> 0 bytes
.../cd-root/grub0/tools.lst | 14 -
.../cd-root/grub0/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/delarch | 63 -
.../pacman.conf.repos | 15 -
.../post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../linhes-local-mirror-stable-i686/pre-process.sh | 8 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 39 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/mkinitcpio.conf.larch | 65 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../linhes-local-mirror-stable-i686/vetopacks | 1 -
.../linhes-local-mirror-testing-i686/addedpacks | 229 -
.../linhes-local-mirror-testing-i686/bootlines | 23 -
.../linhes-local-mirror-testing-i686/cachepacks | 59 -
.../cd-root/grub0/colors.lst | 36 -
.../cd-root/grub0/help.lst | 16 -
.../cd-root/grub0/help/bootexisting.txt | 23 -
.../cd-root/grub0/help/contrib.txt | 23 -
.../cd-root/grub0/keyboards.lst | 111 -
.../cd-root/grub0/menu.lst | 26 -
.../cd-root/grub0/more.lst | 30 -
.../cd-root/grub0/settings.lst | 13 -
.../cd-root/grub0/splash.xpm | 498 -
.../cd-root/grub0/splash.xpm.gz | Bin 15179 -> 0 bytes
.../cd-root/grub0/tools.lst | 14 -
.../cd-root/grub0/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/delarch | 63 -
.../pacman.conf.repos | 15 -
.../post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 5 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../pre-process.sh | 8 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 39 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/mkinitcpio.conf.larch | 65 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.Xdefaults | 2 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../linhes-local-mirror-testing-i686/vetopacks | 1 -
.../profiles/linhes-remote-stable-i686/addedpacks | 228 -
.../profiles/linhes-remote-stable-i686/bootlines | 23 -
.../profiles/linhes-remote-stable-i686/cachepacks | 59 -
.../cd-root/grub0/colors.lst | 36 -
.../cd-root/grub0/help.lst | 16 -
.../cd-root/grub0/help/bootexisting.txt | 23 -
.../cd-root/grub0/help/contrib.txt | 23 -
.../cd-root/grub0/keyboards.lst | 111 -
.../cd-root/grub0/menu.lst | 26 -
.../cd-root/grub0/more.lst | 30 -
.../cd-root/grub0/settings.lst | 13 -
.../cd-root/grub0/splash.xpm | 10957 ------------------
.../cd-root/grub0/splash.xpm.gz | Bin 6829 -> 0 bytes
.../cd-root/grub0/tools.lst | 14 -
.../cd-root/grub0/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/delarch | 63 -
.../linhes-remote-stable-i686/pacman.conf.repos | 13 -
.../linhes-remote-stable-i686/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 4 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../linhes-remote-stable-i686/post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../linhes-remote-stable-i686/pre-process.sh | 8 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 39 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/mkinitcpio.conf.larch | 65 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../profiles/linhes-remote-stable-i686/vetopacks | 1 -
.../profiles/linhes-remote-testing-i686/addedpacks | 229 -
.../profiles/linhes-remote-testing-i686/bootlines | 23 -
.../profiles/linhes-remote-testing-i686/cachepacks | 59 -
.../cd-root/grub0/colors.lst | 36 -
.../cd-root/grub0/help.lst | 16 -
.../cd-root/grub0/help/bootexisting.txt | 23 -
.../cd-root/grub0/help/contrib.txt | 23 -
.../cd-root/grub0/keyboards.lst | 111 -
.../cd-root/grub0/menu.lst | 26 -
.../cd-root/grub0/more.lst | 30 -
.../cd-root/grub0/settings.lst | 13 -
.../cd-root/grub0/splash.xpm.gz | Bin 14946 -> 0 bytes
.../cd-root/grub0/tools.lst | 14 -
.../cd-root/grub0/vbg.jpg | Bin 83554 -> 0 bytes
.../cd-root/larch/copy/actions.rc | 3 -
.../cd-root/larch/copy/autologin | 1 -
.../cd-root/larch/copy/bash_profile | 1 -
.../cd-root/larch/copy/delarch | 63 -
.../linhes-remote-testing-i686/pacman.conf.repos | 15 -
.../linhes-remote-testing-i686/post-process.sh | 17 -
.../post_process/home/mythtv/.bash_profile | 1 -
.../post_process/home/mythtv/.bashrc | 3 -
.../post_process/home/mythtv/.fluxbox/apps | 5 -
.../post_process/home/mythtv/.fluxbox/init | 35 -
.../post_process/home/mythtv/.fluxbox/menu | 81 -
.../post_process/home/mythtv/.fluxbox/menuconfig | 65 -
.../home/mythtv/.fluxbox/wallpaper.png | Bin 119287 -> 0 bytes
.../post_process/home/mythtv/.xinitrc | 18 -
.../post_process/home/mythtv/.xsession | 10 -
.../post_process/hosts.allow | 8 -
.../post_process/hosts.deny | 6 -
.../post_process/menu.lst | 60 -
.../post_process/modify_chroot.sh | 15 -
.../post_process/rc.conf | 112 -
.../post_process/rc.shutdown | 104 -
.../linhes-remote-testing-i686/pre-process.sh | 8 -
.../rootoverlay/etc/X11/xinit/startx.custom | 22 -
.../rootoverlay/etc/X11/xinit/xinitrc.custom | 4 -
.../rootoverlay/etc/X11/xorg.conf | 49 -
.../rootoverlay/etc/X11/xorg.conf.i810 | 59 -
.../rootoverlay/etc/X11/xorg.conf.i810.2 | 67 -
.../rootoverlay/etc/X11/xorg.conf.vesa | 49 -
.../rootoverlay/etc/conf.d/dhcpcd | 6 -
.../rootoverlay/etc/conf.d/fbsplash.bootsteps | 1 -
.../rootoverlay/etc/conf.d/fbsplash.conf | 8 -
.../rootoverlay/etc/conf.d/fbsplash.shutdownsteps | 1 -
.../rootoverlay/etc/hosts.allow | 13 -
.../rootoverlay/etc/inittab | 39 -
.../rootoverlay/etc/inittab.larchsave | 43 -
.../rootoverlay/etc/larch-shutdown | 47 -
.../rootoverlay/etc/mkinitcpio.conf.larch | 65 -
.../rootoverlay/etc/ppp/options | 352 -
.../rootoverlay/etc/rc.local | 93 -
.../rootoverlay/etc/rc.local.shutdown | 7 -
.../rootoverlay/etc/skel/.bash_profile | 3 -
.../rootoverlay/etc/skel/.bashrc | 3 -
.../rootoverlay/etc/skel/.xinitrc | 17 -
.../rootoverlay/etc/skel/.xsession | 10 -
.../rootoverlay/etc/slim.conf | 79 -
.../rootoverlay/root/.Xdefaults | 2 -
.../rootoverlay/root/.fluxbox/apps | 2 -
.../rootoverlay/root/LinHES-install.sh | 34 -
.../rootoverlay/root/startx | 28 -
.../profiles/linhes-remote-testing-i686/vetopacks | 1 -
build_tools/larch7/larch0/profiles/mini/addedpacks | 16 -
build_tools/larch7/larch0/profiles/mini/cachepacks | 11 -
.../profiles/mini/rootoverlay/etc/conf.d/dhcpcd | 6 -
.../profiles/mini/rootoverlay/etc/hosts.allow | 13 -
.../profiles/mini/rootoverlay/etc/inittab.larch | 42 -
.../profiles/mini/rootoverlay/etc/locale.gen | 8 -
.../profiles/mini/rootoverlay/etc/ppp/options | 352 -
.../larch0/profiles/mini/rootoverlay/etc/rc.conf | 92 -
.../larch0/profiles/mini/rootoverlay/root/.bashrc | 2 -
.../profiles/mini/rootoverlay/root/.ssh/id_rsa.pub | 0
build_tools/larch7/larch0/profiles/mini/vetopacks | 3 -
build_tools/larch7/larch0/scripts/gen_repo | 206 -
build_tools/larch7/larch0/scripts/repos.sh | 19 -
953 files changed, 89678 deletions(-)
delete mode 100755 build_tools/clarch/bootusb/bootinst.sh
delete mode 100755 build_tools/clarch/bootusb/lilo
delete mode 120000 build_tools/clarch/cachepacs
delete mode 120000 build_tools/clarch/inpacs
delete mode 100755 build_tools/clarch/larch-setup
delete mode 100644 build_tools/clarch/larch/buildlive
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/colors.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/help.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/keyboards.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/menu.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/more.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/settings.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/grub/tools.lst
delete mode 100644 build_tools/clarch/larch/cd-root/boot/help/bootexisting.txt
delete mode 100644 build_tools/clarch/larch/cd-root/boot/help/contrib.txt
delete mode 100644 build_tools/clarch/larch/cd-root/boot/splash.xpm.gz
delete mode 100644 build_tools/clarch/larch/cd-root/isolinux/bkgd.jpg
delete mode 100644 build_tools/clarch/larch/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/cd-root/isolinux/memtest
delete mode 100644 build_tools/clarch/larch/cd-root/isolinux/vesamenu.c32
delete mode 100644 build_tools/clarch/larch/cd-root/larch/larchboot
delete mode 100644 build_tools/clarch/larch/cd-root/larch/save
delete mode 100644 build_tools/clarch/larch/docs/CHANGES
delete mode 100644 build_tools/clarch/larch/docs/COPYING
delete mode 100644 build_tools/clarch/larch/docs/LICENCE
delete mode 100644 build_tools/clarch/larch/docs/README
delete mode 100644 build_tools/clarch/larch/docs/ReleaseNotes
delete mode 100644 build_tools/clarch/larch/docs/Splash_howto
delete mode 100644 build_tools/clarch/larch/docs/html/index.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch1.jpg
delete mode 100644 build_tools/clarch/larch/docs/html/larch_docindex.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_features.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_fstab.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_intro.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_live_system.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_overview.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_profiles.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_quick.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_running.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_sessionsave.html
delete mode 100644 build_tools/clarch/larch/docs/html/larch_ssh.html
delete mode 100644 build_tools/clarch/larch/profile0/cd-root/README
delete mode 100644 build_tools/clarch/larch/profile0/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profile0/kernel
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/baseveto
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/pacman.conf
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/pkglist
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post-process.sh
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/fstab
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/post_process/root
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/securetty
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local
delete mode 100644 build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/tweak.sh
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/tweak.sh
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/post_process/tweak.sh
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/isolinux/debugsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/isolinux/hardsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/mkinitcpio.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/modify_chroot.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-RELEASE-REMOTE/rootoverlay/root/startx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/debugsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/hardsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/mkinitcpio.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/modify_chroot.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/root/startx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/isolinux/debugsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/isolinux/hardsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/mkinitcpio.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/modify_chroot.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/startx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/addedpacks
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cache_packs
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/locale.gen
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rcconfx
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx
delete mode 100755 build_tools/clarch/larch/run/cachepacs
delete mode 100755 build_tools/clarch/larch/run/gen_repo
delete mode 100755 build_tools/clarch/larch/run/getPackageServer
delete mode 100755 build_tools/clarch/larch/run/inpacs
delete mode 100644 build_tools/clarch/larch/run/jams.cachepacks.larch.patch
delete mode 100644 build_tools/clarch/larch/run/jams.larch.patch
delete mode 100755 build_tools/clarch/larch/run/larchify
delete mode 100755 build_tools/clarch/larch/run/mklarch
delete mode 100644 build_tools/clarch/larch/run/myusbboot
delete mode 100755 build_tools/clarch/larch/run/ssh_init
delete mode 100755 build_tools/clarch/larch/run/usb2bootiso
delete mode 100755 build_tools/clarch/larch/run/usb2iso
delete mode 100755 build_tools/clarch/larch/run/usbboot
delete mode 100755 build_tools/clarch/larch/run/usbboot.orig
delete mode 100755 build_tools/clarch/larch/run/usbboot_grub
delete mode 100755 build_tools/clarch/larch/run/xpack
delete mode 120000 build_tools/clarch/larchify
delete mode 120000 build_tools/clarch/larchroot
delete mode 120000 build_tools/clarch/mklarch
delete mode 100755 build_tools/clarch/remove_links.sh
delete mode 100755 build_tools/clarch/setup_links.sh
delete mode 100755 build_tools/clarch/sync_profile.sh
delete mode 120000 build_tools/clarch/usb2bootiso
delete mode 100755 build_tools/larch7/build_all
delete mode 100755 build_tools/larch7/cachepacs
delete mode 120000 build_tools/larch7/larch
delete mode 100644 build_tools/larch7/larch-7.2.18-1-any.pkg.tar.gz
delete mode 120000 build_tools/larch7/larch-archin
delete mode 100755 build_tools/larch7/larch-archin.orig
delete mode 120000 build_tools/larch7/larch-boot_iso
delete mode 120000 build_tools/larch7/larch-larchify
delete mode 100755 build_tools/larch7/larch-larchify.orig
delete mode 120000 build_tools/larch7/larch-live_iso
delete mode 120000 build_tools/larch7/larch-live_part
delete mode 100644 build_tools/larch7/larch-profiles-7.2.0-1-any.pkg.tar.gz
delete mode 100644 build_tools/larch7/larch-setup
delete mode 100755 build_tools/larch7/larch0/buildscripts/cleardir
delete mode 100755 build_tools/larch7/larch0/buildscripts/larch-hosts
delete mode 100755 build_tools/larch7/larch0/buildscripts/larch-locales
delete mode 100755 build_tools/larch7/larch0/buildscripts/larch-mbr-grub
delete mode 100644 build_tools/larch7/larch0/cd-root/boot0/memtest
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/colors.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/help.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/help/bootexisting.txt
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/help/contrib.txt
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/keyboards.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/menu.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/more.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/grub0/tools.lst
delete mode 100644 build_tools/larch7/larch0/cd-root/isolinux0/bkgd.jpg
delete mode 100644 build_tools/larch7/larch0/cd-root/isolinux0/isolinux.cfg
delete mode 100755 build_tools/larch7/larch0/cli/archin.py
delete mode 100755 build_tools/larch7/larch0/cli/archin.py.orig
delete mode 100644 build_tools/larch7/larch0/cli/backend.py
delete mode 100755 build_tools/larch7/larch0/cli/boot_iso.py
delete mode 100644 build_tools/larch7/larch0/cli/config.py
delete mode 100755 build_tools/larch7/larch0/cli/larchify.py
delete mode 100755 build_tools/larch7/larch0/cli/live_iso.py
delete mode 100755 build_tools/larch7/larch0/cli/live_part.py
delete mode 100644 build_tools/larch7/larch0/cli/media_common.py
delete mode 100755 build_tools/larch7/larch0/cli/test.py
delete mode 100644 build_tools/larch7/larch0/cli/userinfo.py
delete mode 100644 build_tools/larch7/larch0/data/bootlines
delete mode 100644 build_tools/larch7/larch0/data/locales
delete mode 100644 build_tools/larch7/larch0/data/pacman.conf
delete mode 100644 build_tools/larch7/larch0/data/pacman.conf.repos
delete mode 100644 build_tools/larch7/larch0/data/requiredpacks
delete mode 100644 build_tools/larch7/larch0/docs/BUGS_TODO
delete mode 100644 build_tools/larch7/larch0/docs/COPYING
delete mode 100644 build_tools/larch7/larch0/docs/LICENCE
delete mode 100644 build_tools/larch7/larch0/docs/README
delete mode 100644 build_tools/larch7/larch0/docs/html/archin.html
delete mode 100644 build_tools/larch7/larch0/docs/html/css/larchdocs.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/bark.jpg
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/basemod.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/bottom-left.png
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/bottom-right.png
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/green-gradient200.jpg
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/larch150x.png
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/nav_vlist.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/top-left.png
delete mode 100644 build_tools/larch7/larch0/docs/html/css/screen/top-right.png
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/core/base.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/core/iehacks.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/core/js/webkit-focusfix.js
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/core/slim_base.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/core/slim_iehacks.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/print/print_100_draft.css
delete mode 100644 build_tools/larch7/larch0/docs/html/css/yaml/screen/content_default.css
delete mode 100644 build_tools/larch7/larch0/docs/html/gui_installation.html
delete mode 100644 build_tools/larch7/larch0/docs/html/gui_larchify.html
delete mode 100644 build_tools/larch7/larch0/docs/html/gui_medium.html
delete mode 100644 build_tools/larch7/larch0/docs/html/gui_mediumprofile.html
delete mode 100644 build_tools/larch7/larch0/docs/html/gui_project_settings.html
delete mode 100644 build_tools/larch7/larch0/docs/html/index.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_features.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_gui.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_intro.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_live_system.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_quick-console.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_quick.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_rebuild.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_running.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_sessionsave.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larch_ssh.html
delete mode 100644 build_tools/larch7/larch0/docs/html/larchify.html
delete mode 100644 build_tools/larch7/larch0/docs/html/medium.html
delete mode 100644 build_tools/larch7/larch0/docs/html/profiles.html
delete mode 100644 build_tools/larch7/larch0/gui/MEDIUM_README
delete mode 100755 build_tools/larch7/larch0/gui/askpass.py
delete mode 100644 build_tools/larch7/larch0/gui/controller.py
delete mode 100755 build_tools/larch7/larch0/gui/dirview.py
delete mode 100755 build_tools/larch7/larch0/gui/dispatcher.py
delete mode 100644 build_tools/larch7/larch0/gui/front/docviewer.py
delete mode 100644 build_tools/larch7/larch0/gui/front/editor.py
delete mode 100644 build_tools/larch7/larch0/gui/front/logview.py
delete mode 100644 build_tools/larch7/larch0/gui/front/mainwindow.py
delete mode 100644 build_tools/larch7/larch0/gui/front/page_installation.py
delete mode 100644 build_tools/larch7/larch0/gui/front/page_larchify.py
delete mode 100644 build_tools/larch7/larch0/gui/front/page_medium.py
delete mode 100644 build_tools/larch7/larch0/gui/front/page_mediumprofile.py
delete mode 100644 build_tools/larch7/larch0/gui/front/page_project.py
delete mode 100644 build_tools/larch7/larch0/gui/front/uim.py
delete mode 100755 build_tools/larch7/larch0/gui/larch.py
delete mode 100644 build_tools/larch7/larch0/gui/layouts/docviewer.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/editor.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/logger.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_installation.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_larchify.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_main.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_medium.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_mediumprofile.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/page_project.uim
delete mode 100644 build_tools/larch7/larch0/gui/layouts/progress.uim
delete mode 100644 build_tools/larch7/larch0/gui/project.py
delete mode 100644 build_tools/larch7/larch0/i18n/ca/LC_MESSAGES/ca.po
delete mode 100644 build_tools/larch7/larch0/i18n/ca/LC_MESSAGES/larch.mo
delete mode 100644 build_tools/larch7/larch0/i18n/de/LC_MESSAGES/de.po
delete mode 100644 build_tools/larch7/larch0/i18n/de/LC_MESSAGES/larch.mo
delete mode 100755 build_tools/larch7/larch0/i18n/i18n.py
delete mode 100755 build_tools/larch7/larch0/i18n/i18n2.py
delete mode 100644 build_tools/larch7/larch0/i18n/larch.pot
delete mode 100644 build_tools/larch7/larch0/i18n/zh/LC_MESSAGES/larch.mo
delete mode 100644 build_tools/larch7/larch0/i18n/zh/LC_MESSAGES/zh.po
delete mode 100644 build_tools/larch7/larch0/images/larch.png
delete mode 100644 build_tools/larch7/larch0/images/larch80.png
delete mode 100644 build_tools/larch7/larch0/images/larchicon.png
delete mode 100644 build_tools/larch7/larch0/profiles/default/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/bootlines
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cachepacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/colors.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/help.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/help/bootexisting.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/help/contrib.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/keyboards.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/more.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/splash.xpm
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/splash.xpm.gz
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/tools.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/grub0/vbg.jpg
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/larch/copy/actions.rc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/larch/copy/autologin
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/larch/copy/bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/cd-root/larch/copy/delarch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/pacman.conf.repos
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.fluxbox/init
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.fluxbox/menu
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/home/mythtv/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/hosts.deny
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/modify_chroot.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/rc.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/post_process/rc.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/pre-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xorg.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/dhcpcd
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larchsave
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/larch-shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/rc.local
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/rc.local.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/root/.Xdefaults
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/root/startx
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-disk-testing-i686/vetopacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/bootlines
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cachepacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/colors.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/help.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/help/bootexisting.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/help/contrib.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/keyboards.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/more.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/splash.xpm
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/splash.xpm.gz
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/tools.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/grub0/vbg.jpg
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/larch/copy/actions.rc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/larch/copy/autologin
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/larch/copy/bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/cd-root/larch/copy/delarch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/pacman.conf.repos
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.fluxbox/init
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.fluxbox/menu
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/home/mythtv/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/hosts.deny
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/modify_chroot.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/rc.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/post_process/rc.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/pre-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xorg.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/conf.d/dhcpcd
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/inittab
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/inittab.larchsave
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/larch-shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/rc.local
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/rc.local.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/skel/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/skel/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/skel/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/etc/slim.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/rootoverlay/root/startx
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-stable-i686/vetopacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/bootlines
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cachepacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/colors.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/help.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/help/bootexisting.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/help/contrib.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/keyboards.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/more.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/splash.xpm
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/splash.xpm.gz
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/tools.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/grub0/vbg.jpg
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/copy/actions.rc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/copy/autologin
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/copy/bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/copy/delarch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/pacman.conf.repos
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/init
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menu
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.deny
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/modify_chroot.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/pre-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/dhcpcd
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larchsave
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/larch-shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/skel/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/skel/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/skel/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.Xdefaults
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/startx
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-local-mirror-testing-i686/vetopacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/bootlines
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cachepacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/colors.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/help.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/help/bootexisting.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/help/contrib.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/keyboards.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/more.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/splash.xpm
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/splash.xpm.gz
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/tools.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/grub0/vbg.jpg
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/larch/copy/actions.rc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/larch/copy/autologin
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/larch/copy/bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/cd-root/larch/copy/delarch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/pacman.conf.repos
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.fluxbox/init
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.fluxbox/menu
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/home/mythtv/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/hosts.deny
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/modify_chroot.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/rc.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/post_process/rc.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/pre-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xorg.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/conf.d/dhcpcd
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/inittab
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/inittab.larchsave
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/larch-shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/mkinitcpio.conf.larch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/rc.local
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/rc.local.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/skel/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/skel/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/skel/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/etc/slim.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/rootoverlay/root/startx
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-stable-i686/vetopacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/addedpacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/bootlines
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cachepacks
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/colors.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/bootexisting.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/help/contrib.txt
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/keyboards.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/more.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/settings.lst
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/splash.xpm.gz
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/tools.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/grub0/vbg.jpg
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/actions.rc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/autologin
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/cd-root/larch/copy/delarch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/pacman.conf.repos
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.fluxbox/init
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.fluxbox/menu
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/home/mythtv/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/hosts.deny
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/menu.lst
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/modify_chroot.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/rc.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/post_process/rc.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/pre-process.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf
delete mode 100644 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.Xdefaults
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/LinHES-install.sh
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/startx
delete mode 100755 build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/vetopacks
delete mode 100644 build_tools/larch7/larch0/profiles/mini/addedpacks
delete mode 100644 build_tools/larch7/larch0/profiles/mini/cachepacks
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/conf.d/dhcpcd
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/hosts.allow
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/inittab.larch
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/locale.gen
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/ppp/options
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/etc/rc.conf
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/root/.bashrc
delete mode 100644 build_tools/larch7/larch0/profiles/mini/rootoverlay/root/.ssh/id_rsa.pub
delete mode 100644 build_tools/larch7/larch0/profiles/mini/vetopacks
delete mode 100755 build_tools/larch7/larch0/scripts/gen_repo
delete mode 100755 build_tools/larch7/larch0/scripts/repos.sh
diff --git a/build_tools/clarch/bootusb/bootinst.sh b/build_tools/clarch/bootusb/bootinst.sh
deleted file mode 100755
index 258413c..0000000
--- a/build_tools/clarch/bootusb/bootinst.sh
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/bash
-set -e
-TARGET=""
-MBR=""
-DISTRO=MythVantage
-MP=`pwd`
-# Find out which partition or disk are we using
-MYMNT=$(cd -P $(dirname $0) ; pwd)
-while [ "$MYMNT" != "" -a "$MYMNT" != "." -a "$MYMNT" != "/" ]; do
- TARGET=$(egrep "[^[:space:]]+[[:space:]]+$MYMNT[[:space:]]+" /proc/mounts | cut -d " " -f 1)
- if [ "$TARGET" != "" ]; then break; fi
- MYMNT=$(dirname "$MYMNT")
-done
-
-if [ "$TARGET" = "" ]; then
- echo "Can't find device to install to."
- echo "Make sure you run this script from a mounted device."
- exit 1
-fi
-
-MBR=$(echo "$TARGET" | sed -r "s/[0-9]+\$//g")
-NUM=${TARGET:${#MBR}}
-cd "$MYMNT"
-clear
-echo $MP
-
-echo "This installer will setup disk $TARGET to boot only $DISTRO."
-if [ "$MBR" != "$TARGET" ]; then
- echo
- echo "Warning! Master boot record (MBR) of $MBR will be overwritten."
- echo "If you use $MBR to boot any existing operating system, it will not work"
- echo "anymore. Only $DISTRO will boot from this device. Be careful!"
-fi
-echo
-echo "Press any key to continue, or Ctrl+C to abort..."
-read junk
-clear
-echo "Flushing filesystem buffers, this may take a while..."
-sync
-pwd
-
-# setup MBR if the device is not in superfloppy format
-if [ "$MBR" != "$TARGET" ]; then
- echo "Setting up MBR on $MBR..."
- syslinux/lilo -S /dev/null -M $MBR ext
- # this must be here to support -A for extended partitions
- #echo "Activating partition $TARGET..."
- syslinux/lilo -S /dev/null -A $MBR $NUM
- echo "Updating MBR on $MBR..."
- # this must be here because LILO mbr is bad. mbr.bin is from syslinux
- cat syslinux/mbr.bin > $MBR
-fi
-
-echo "Setting up boot record for $TARGET..."
- syslinux/syslinux $TARGET
-
-echo "Disk $TARGET should be bootable now. Installation finished."
-
-echo
-echo "Read the information above and then press any key to exit..."
-read junk
diff --git a/build_tools/clarch/bootusb/lilo b/build_tools/clarch/bootusb/lilo
deleted file mode 100755
index afb2f37..0000000
Binary files a/build_tools/clarch/bootusb/lilo and /dev/null differ
diff --git a/build_tools/clarch/cachepacs b/build_tools/clarch/cachepacs
deleted file mode 120000
index 4777910..0000000
--- a/build_tools/clarch/cachepacs
+++ /dev/null
@@ -1 +0,0 @@
-larch/run/cachepacs
\ No newline at end of file
diff --git a/build_tools/clarch/inpacs b/build_tools/clarch/inpacs
deleted file mode 120000
index 9e950b1..0000000
--- a/build_tools/clarch/inpacs
+++ /dev/null
@@ -1 +0,0 @@
-larch/run/inpacs
\ No newline at end of file
diff --git a/build_tools/clarch/larch-setup b/build_tools/clarch/larch-setup
deleted file mode 100755
index 23e39f5..0000000
--- a/build_tools/clarch/larch-setup
+++ /dev/null
@@ -1,125 +0,0 @@
-#! /bin/bash
-#
-# larch-setup
-#
-# Author: Michael Towers
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-# 2008.08.10
-
-REPO="ftp://ftp.berlios.de/pub/larch/larch5.3/i686"
-#REPO=file://$( readlink -f larchrepo )
-
-if [ "$1" = "-h" ]; then
- echo "larch-setup -h"
- echo " # Display this information."
- echo "larch-setup"
- echo " # Set up a larch build environment in the current directory."
- echo " # x86_64 should be detected automatically."
- echo
- echo "This script unpacks larch, so that 'mklarch', etc.,"
- echo "can be run from this directory, without installing."
- echo "It also generates appropriate symlinks."
- echo
- echo "If there is no pacman in the PATH, a package containing the pacman"
- echo "binary and the libraries it needs can be downloaded from the larch"
- echo "site and a starter script placed in larch/run."
- echo "Also repo-add is extracted there and a pacman.conf is generated in"
- echo "the current directory, presenting a dialog for choosing the package"
- echo "server."
- echo "You can use an existing pacman.conf by placing this in the current"
- echo "directory."
- echo
- exit
-fi
-
-sysarch="$( uname -m )"
-if [ "${sysarch}" != "x86_64" ]; then
- sysarch="i686"
-fi
-
-# Get path to this directory, via the location of this script
-fullpath="$( readlink -f $0 )"
-scriptdir="$( dirname ${fullpath} )"
-
-# Just in case ...
-cd ${scriptdir}
-
-if [ -d larch ]; then
- echo "ERROR: larch directory exists already"
- exit 1
-fi
-
-fetch ()
-{
- if [ -n "$( echo ${REPO} | grep "file://" )" ]; then
- base="$( echo ${REPO} | sed "s|file://||" )"
- cp ${base}/$1 .
- else
- wget ${REPO}/$1
- fi
-}
-
-if ! [ -f larch-*.pkg.tar.gz ]; then
- rm -rf tmp
- mkdir tmp
- cd tmp
- fetch larch5.db.tar.gz
- tar -xzf larch5.db.tar.gz
- d=$( ls | grep "^larch-5" )
- larchpak=$( grep -A 1 -e "%FILENAME%" ${d}/desc | grep -v "%" )
- cd ${scriptdir}
- fetch ${larchpak}
-fi
-
-rm -rf tmp
-mkdir tmp
-tar -xzf larch-5*.pkg.tar.gz -C tmp
-mv tmp/opt/larch .
-rm -rf tmp
-
-ln -s ${scriptdir}/larch/run/mklarch mklarch
-ln -s ${scriptdir}/larch/run/larchify larchify
-ln -s ${scriptdir}/larch/run/inpacs inpacs
-ln -s ${scriptdir}/larch/run/usb2bootiso usb2bootiso
-
-# Check that pacman is available.
-if ! which pacman &>/dev/null; then
- # Fetch the pacman package from the larch site if there isn't a
- # pacman script in larch/run
- if ! [ -f larch/run/pacman ]; then
- fetch pacman-packed.tar.gz
- if ! [ -f pacman-packed.tar.gz ]; then
- echo "ERROR: couldn't fetch pacman package"
- exit 1
- fi
- # Extract the needed files from the package
- tar -xzf pacman-packed.tar.gz
- cp larch/config/mirrorlist repolist
- if ! [ -f pacman.conf ]; then
- cp larch/config/pacman.conf pacman.conf
- # Select a package server
- larch/run/getPackageServer -i repolist pacman.conf
- cp pacman.conf pacman.conf.0
- # Prevent error messages because of missing /etc/pacman.d/mirrorlist
- sed 's|^\(Include =\)|#\1|' -i pacman.conf
- fi
- fi
-fi
-
diff --git a/build_tools/clarch/larch/buildlive b/build_tools/clarch/larch/buildlive
deleted file mode 100644
index 8b734d2..0000000
--- a/build_tools/clarch/larch/buildlive
+++ /dev/null
@@ -1,538 +0,0 @@
-# buildlive - functions to build larch live CD
-#
-# Author: Michael Towers
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-# 2008.06.07
-
-# Location for the CD image
-CDDATA="${LARCHBUILD}/cd"
-
-############ ENTRY POINT - mklive ###############
-
-#+++++++mklive: main function for building larch system from
-# Arch installation at ${INSTLDIR}, which can
-# be '' to use currently running Arch installation.
-
-mklive ()
-{
- echo "//"
- echo "// **********************************************************"
- echo "//"
- if [ -n "${REUSE}" ] && [ -e ${CDDATA}/system.sqf ]; then
- echo "// ***** Recreating live CD with old squashed system"
- REGEN="yes"
- else
- echo "// ***** Creating live CD from system at '${INSTLDIR}'"
- REGEN="no"
- fi
-
- echo "//"
- echo "// This will delete EVERYTHING under ::: ${CDDATA} :::"
- echo "//"
- if [ -z "${DONTASK}" ]; then
- echo "// I really mean it ... Are you sure you want to do this?"
- echo "// **********************************************************"
- # Await yes or no
- read -p "[y/N]: " ans
- if [ -z "$( echo ${ans} | grep '^ *[yY]' )" ]; then return 0; fi
- echo
- fi
-
- # Get kernel version
- if ! find_kernel; then
- return 1
- fi
-
- # If not building live CD from currently running system, chroot is
- # needed sometimes. 'chrootx' simplifies this a bit.
- if [ -n "${INSTLDIR}" ]; then
- chrootx="chroot ${INSTLDIR} "
- else
- chrootx=""
- fi
-
- # Test for necessary packages/modules
- fail=0
- aufs=''
- if ! ${chrootx}grep /squashfs.ko \
- /lib/modules/${KVERSION}/modules.dep &>/dev/null; then
- echo "ERROR: No squashfs module found"
- fail=1
- fi
- if ${chrootx}grep /aufs.ko \
- /lib/modules/${KVERSION}/modules.dep &>/dev/null; then
- aufs='_aufs'
- echo "Using aufs"
- elif ${chrootx}grep /unionfs.ko \
- /lib/modules/${KVERSION}/modules.dep &>/dev/null; then
- echo "Using unionfs"
- else
- echo "ERROR: No aufs or unionfs module found"
- fail=1
- fi
- #a live package of some sort needs to be installed, but not specificly linhes-live
- #mustpacs="linhes-live lzop tar squashfs-tools"
- mustpacs="lzop tar squashfs-tools"
- if [ -z "${GRUB}" ]; then
- mustpacs="${mustpacs} syslinux"
- fi
- for p in ${mustpacs}; do
- pac=$( ls ${INSTLDIR}/var/lib/pacman/local | egrep "^${p}-[^-]+-[^-]+$" )
- if [ -z "${pac}" ]; then
- echo "ERROR: Package ${p} is not installed on target"
- fail=1
- fi
- done
-
- if [ -z "${USB}" ] && ! which mkisofs &>/dev/null; then
- echo "ERROR: mkisofs not found -"
- echo " cdrkit (or cdrtools) must be installed on host"
- fail=1
- fi
-
- if [ ${fail} -ne 0 ]; then
- return 1
- fi
-
- # Temporary directory for building stuff
- rm -rf ${LARCHBUILD}/tmp
- mkdir -p ${LARCHBUILD}/tmp
-
- # If using old sqf files move them to a temporary, safe location
- if [ ${REGEN} = "yes" ]; then
- echo "// moving old system image to ${LARCHBUILD}/tmp"
- mv ${CDDATA}/system.sqf ${LARCHBUILD}/tmp
- fi
-
-
- ############## START: copying data to boot medium image directory (CDDATA)
-
- # Clear out the directory.
- echo "// copying cd-root to ${CDDATA}"
- mkdir -p ${CDDATA}
- rm -Rf ${CDDATA}/*
-
- # cd-root: first general stuff, then from profile
- cp -R ${LARCHDATA}/cd-root/* ${CDDATA}
- if [ -n "${PROFILE}" ]; then
- cp -Rf ${PROFILE}/cd-root/* ${CDDATA}
- fi
-
- # kernel
- echo "// copying kernel from ${INSTLDIR}/boot to ${CDDATA}/boot/vmlinuz"
- echo "// ... using ${VMLINUZ}"
- cp -f ${INSTLDIR}/boot/${VMLINUZ} ${CDDATA}/boot/vmlinuz
-
- ### Generate initcpio (using chroot if necessary) then copy it to CDDATA
-
- # If there is a mkinitcpio.conf in profile, use it
- if [ -n "${PROFILE}" ] && [ -f ${PROFILE}/mkinitcpio.conf ]; then
- cp -f ${PROFILE}/mkinitcpio.conf ${INSTLDIR}/lib/initcpio
- fi
-
- # Fix up mkinitcpio.conf for unionfs/aufs
- sed -i "s|___aufs___|${aufs}|g" ${INSTLDIR}/lib/initcpio/mkinitcpio.conf
-
- echo "// calling gen_larch_init to generate the initramfs"
- ${chrootx}/lib/initcpio/gen_larch_init ${KVERSION}
- if [ -n "${INSTLDIR}" ]; then
- mv -f ${INSTLDIR}/larch.img ${CDDATA}/boot
- else
- mv -f larch.img ${CDDATA}/boot
- fi
-
- #!!!!! This can't be allowed if ${INSTLDIR} = ''
- # mkinitcpio seems to use the '/tmp' directory, so clear it out
- if [ -n "${INSTLDIR}" ]; then
- rm -rf ${INSTLDIR}/tmp/*
- fi
-
- ### END of initcpio generation
-
- ### if no saved system.sqf, squash the Arch installation at ${INSTLDIR}
- if [ ! -e "${LARCHBUILD}/tmp/system.sqf" ]; then
- ignorefiles=/.larch/ignorefiles
- :>${INSTLDIR}${ignorefiles}
-
- echo "// ignoring superfluous initrd/initramfs images from /boot"
- # Only the fallbacks should make it to system.sqf, as the others
- # won't work on other systems anyway, and should be regenerated.
- for i in $( ls ${INSTLDIR}/boot | grep "kernel.*\.img" ); do
- if [ -z "$( echo ${i} | grep "fallback" )" ]; then
- echo " ... ${i}"
- echo "boot/${i}" >>${INSTLDIR}${ignorefiles}
- fi
- done
-
- # root directories which are not included in the squashed system.sqf
- ignoredirs="dev mnt media proc sys tmp var .larch .livesys"
-
- echo "// creating compressed image of linux system: system.sqf"
- mksquash "/" "/.larch/tmp/system.sqf" -ef ${ignorefiles} \
- -e ${ignoredirs}
- if [ $? -ne 0 ]; then
- return 1
- fi
-
- # Add /var, but mask out some undesirable stuff: use mount --bind
- # first make fresh pacman cache, log and tmp directories
- mkdir -p ${LARCHBUILD}/tmp/varbld/paccache
- mkdir -p ${LARCHBUILD}/tmp/varbld/varlog/old
- :>${LARCHBUILD}/tmp/varbld/varlog/wtmp
- :>${LARCHBUILD}/tmp/varbld/varlog/utmp
- :>${LARCHBUILD}/tmp/varbld/varlog/btmp
- chmod 600 ${LARCHBUILD}/tmp/varbld/varlog/btmp
- :>${LARCHBUILD}/tmp/varbld/varlog/lastlog
- mkdir -m 1777 ${LARCHBUILD}/tmp/varbld/vartmp
- # and a mount point for var, then mount it
- mkdir -p ${LARCHBUILD}/tmp/varbld/var0/var
- mount --bind ${INSTLDIR}/var ${LARCHBUILD}/tmp/varbld/var0/var
- # mount the cover-ups
- mount --bind ${LARCHBUILD}/tmp/varbld/paccache \
- ${LARCHBUILD}/tmp/varbld/var0/var/cache/pacman
- mount --bind ${LARCHBUILD}/tmp/varbld/varlog \
- ${LARCHBUILD}/tmp/varbld/var0/var/log
- mount --bind ${LARCHBUILD}/tmp/varbld/vartmp \
- ${LARCHBUILD}/tmp/varbld/var0/var/tmp
- # do the squashing
- mksquash "/.larch/tmp/varbld/var0" "/.larch/tmp/system.sqf"
- res=$?
-
- # unmount all the binds
- umount ${LARCHBUILD}/tmp/varbld/var0/var/tmp
- umount ${LARCHBUILD}/tmp/varbld/var0/var/log
- umount ${LARCHBUILD}/tmp/varbld/var0/var/cache/pacman
- umount ${LARCHBUILD}/tmp/varbld/var0/var
- rm -r ${LARCHBUILD}/tmp/varbld
-
- if [ ${res} -ne 0 ]; then
- echo "Failed while extending /var"
- return 1
- fi
-
- fi
-
- # move system.sqf to boot-medium image directory
- echo "// moving squashed system image from ${LARCHBUILD}/tmp"
- mv ${LARCHBUILD}/tmp/system.sqf ${CDDATA}
- if [ $? -ne 0 ]; then
- echo "ERROR: failed to move system.sqf to build area"
- return 1
- fi
-
- ##### Prepare initial overlay
- echo "// building overlay"
-
- # Build overlay in a temporary directory
- rm -rf ${LARCHBUILD}/tmp/overlay
-
- # Copy over the overlay(s) from the selected profile
- if [ -n "${PROFILE}" ]; then
- # Note that ownership/mode of all files in overlay(.xpk) must be
- # correct! This information will be preserved.
- if [ -d ${PROFILE}/overlay ]; then
- cp -a ${PROFILE}/overlay ${LARCHBUILD}/tmp
- elif [ -f ${PROFILE}/overlay.xpk ]; then
- # deal with packed overlay
- ${PROFILE}/overlay.xpk ${LARCHBUILD}/tmp
- else
- mkdir ${LARCHBUILD}/tmp/overlay
- fi
-
- if [ -d ${PROFILE}/rootoverlay ]; then
- cp -rf ${PROFILE}/rootoverlay/* ${LARCHBUILD}/tmp/overlay
- fi
-
- fi
-
- # Ensure the overlay has at least the /etc folder
- mkdir -p ${LARCHBUILD}/tmp/overlay/etc
-
- # Save original /etc/inittab, /etc/rc.sysinit and /etc/rc.shutdown
- for fsave in inittab rc.sysinit rc.shutdown; do
- if [ -f ${INSTLDIR}/etc/${fsave}.livesave ]; then
- # A running larch system will already have this file, and it
- # shouldn't be overwritten
- echo "// /etc/${fsave}.livesave exists already, not overwriting"
- elif [ -f ${LARCHBUILD}/tmp/overlay/etc/${fsave}.livesave ]; then
- # A profile can supply this file in the overlay, and it
- # shouldn't be overwritten
- echo "// /etc/${fsave}.livesave found in overlay, not overwriting"
- else
- cp ${INSTLDIR}/etc/${fsave} \
- ${LARCHBUILD}/tmp/overlay/etc/${fsave}.livesave
- fi
- done
-
- # Place the live rc.sysinit and rc.shutdown scripts in the overlay
- cp ${INSTLDIR}/etc/rc.sysinit-live ${LARCHBUILD}/tmp/overlay/etc/rc.sysinit
- cp ${INSTLDIR}/etc/rc.shutdown-live ${LARCHBUILD}/tmp/overlay/etc/rc.shutdown
-
- # Add IgnorePkg to pacman.conf
- if ! [ -f ${LARCHBUILD}/tmp/overlay/etc/pacman.conf ]; then
- cp ${INSTLDIR}/etc/pacman.conf ${LARCHBUILD}/tmp/overlay/etc/pacman.conf
- fi
- if ! grep "+++LARCH-IGNORE+++" ${LARCHBUILD}/tmp/overlay/etc/pacman.conf \
- &>/dev/null; then
- igpak="IgnorePkg = kernel26 aufs initscripts"
- for pak in $( cat ${PROFILE}/noupdate 2>/dev/null ); do
- igpak="${igpak} ${pak}"
- done
- sed "/\[options\]/ a\#+++LARCH-IGNORE+++\n${igpak}\n#---LARCH-IGNORE---" \
- -i ${LARCHBUILD}/tmp/overlay/etc/pacman.conf
- fi
-
- # Generate customized /etc/rc.conf
- if [ -n "${PROFILE}" ] && [ -f ${PROFILE}/rcconfx ]; then
- # If there is one in the given overlay, start with that
- if [ ! -f ${LARCHBUILD}/tmp/overlay/etc/rc.conf ]; then
- # else copy the default one
- cp ${INSTLDIR}/etc/rc.conf ${LARCHBUILD}/tmp/overlay/etc
- fi
- cat ${PROFILE}/rcconfx | grep -v "^#" | grep "=" | { while read line; do
- var="$( echo ${line} | cut -d'=' -f1 )"
- sed -i "s|^${var}=.*|${line}|" \
- ${LARCHBUILD}/tmp/overlay/etc/rc.conf
- done }
- fi
-
- # Add hostname to /etc/hosts localhost, if making new rc.conf
- if [ -f ${LARCHBUILD}/tmp/overlay/etc/rc.conf ]; then
- hosts=${LARCHBUILD}/tmp/overlay/etc/hosts
- if ! [ -f ${LARCHBUILD}/tmp/overlay/etc/hosts ]; then
- cp ${INSTLDIR}/etc/hosts ${LARCHBUILD}/tmp/overlay/etc
- fi
- ( . ${LARCHBUILD}/tmp/overlay/etc/rc.conf;
- lh="127.0.0.1 localhost.localdomain localhost ";
- sed -i "s|^127\.0\.0\.1.*|${lh}${HOSTNAME}|" ${hosts}
- )
- fi
-
- # Handle /mnt
- mkdir -p ${LARCHBUILD}/tmp/overlay/mnt
- for d in $( ls ${INSTLDIR}/mnt ); do
- if [ -d ${INSTLDIR}/mnt/${d} ]; then
- mkdir ${LARCHBUILD}/tmp/overlay/mnt/${d}
- fi
- done
-
- echo "// creating compressed image of larch mods: mods.sqf"
-
- # Make 'mods' archive from all but /etc
- mksquash "/.larch/tmp/overlay" "/.larch/cd/mods.sqf" -e etc
- if [ $? -ne 0 ]; then
- return 1
- fi
-
- echo "// creating compressed image of remaining larch mods: overlay.ovl"
-
- # Compress the overlay (with root dir 'overlay' retained)
- ${chrootx} bash -c "tar -cf - -C /.larch/tmp overlay/etc |
- lzop > /.larch/cd/overlay.ovl"
-
- rm -rf ${LARCHBUILD}/tmp/overlay
-
- ##### End of overlay creation
- ############## END: copying data to boot medium image directory (CDDATA)
-
- # The boot medium image is now ready
- buildiso
-}
-
-
-
-########## START: functions for building iso from image directory ##########
-
-#+++++++buildiso: set up boot medium image folder and then
-# create iso or call usb medium handler
-
-buildiso ()
-{
- mkdir ${CDDATA}/tmp
- if [ -f ${CDDATA}/boot/vmlinuz ]; then
- bd=${CDDATA}/boot
- else
- bd=${CDDATA}/isolinux
- fi
- cp ${bd}/{vmlinuz,larch.img} ${CDDATA}/tmp
- rm -rf ${CDDATA}/{isolinux,boot}
- if [ -n "${GRUB}" ]; then
- mv ${CDDATA}/tmp ${CDDATA}/boot
-
- mkdir -p ${CDDATA}/boot/grub
- cp ${INSTLDIR}/usr/lib/grub/i386-pc/* ${CDDATA}/boot/grub
- cp -r ${LARCHDATA}/cd-root/boot ${CDDATA}
- if [ -n "${PROFILE}" ] && [ -d ${PROFILE}/cd-root/boot ]; then
- cp -rf ${PROFILE}/cd-root/boot ${CDDATA} 2>/dev/null
- fi
-
- if [ -n "${USB}" ]; then
- usbboot_grub ${INSTLDIR}
- else
- echo "// creating GRUB-booting LiveCD ISO image..."
- mkiso "-b boot/grub/stage2_eltorito"
- fi
- else
- mv ${CDDATA}/tmp ${CDDATA}/isolinux
-
- cp -r ${LARCHDATA}/cd-root/isolinux ${CDDATA}
- if [ -n "${PROFILE}" ] && [ -d ${PROFILE}/cd-root/isolinux ]; then
- cp -rf ${PROFILE}/cd-root/isolinux ${CDDATA} 2>/dev/null
- fi
-
- isolinuxbin=${INSTLDIR}/usr/lib/syslinux/isolinux.bin
- if [ -f ${isolinuxbin} ]; then
- cp ${isolinuxbin} ${CDDATA}/isolinux
- else
- echo "ERROR: ${isolinuxbin} not found -"
- echo " syslinux must be installed on live system"
- return 1
- fi
-
- #if [ -n "${USB}" ]; then
- # usbboot ${INSTLDIR}
- # else
- echo "// creating isolinux-booting LiveCD ISO image..."
- mkiso "-b isolinux/isolinux.bin -c isolinux/isolinux.boot"
- usbboot ${INSTLDIR} ${startdir}
-
- # fi
- fi
-}
-
-#+++++++mkiso: helper function for calling mkisofs
-
-mkiso ()
-{
- mkisofs -r -l $1 \
- -no-emul-boot -boot-load-size 4 -boot-info-table \
- -input-charset=UTF-8 \
- -publisher "Cecil H. Watson, license: GPL" \
- -A "LinHES_6" \
- -p "http://www.knoppmyth.net" \
- -o "${LARCHBUILD}/mylivecd.iso" "${CDDATA}"
-
- if [ $? -eq 0 ]; then
- echo "// Your ISO has been created as ${LARCHBUILD}/mylivecd.iso"
- else
- echo "ERROR: iso build failed" 1>&2
- return 1
- fi
-}
-
-########## END: functions for building iso ##########
-
-
-
-#+++++++mksquash: helper function for using mksquashfs via chroot
-
-mksquash ()
-{
- if [ -n "${INSTLDIR}" ]; then
- mount --bind /proc ${INSTLDIR}/proc
- eval chroot ${INSTLDIR} /sbin/mksquashfs $*
- umount ${INSTLDIR}/proc
- else
- /sbin/mksquashfs $*
- fi
- if [ $? -ne 0 ]; then
- echo "ERROR: squash failed --- mksquashfs $*"
- return 1
- fi
- chmod oga-x "${INSTLDIR}/$2" # remove execute attrib
-}
-
-
-#+++++++find_kernel: helper function to get kernel information
-
-find_kernel ()
-{
- # Discover kernel
- if [ -n "${PROFILE}" ] && [ -f ${PROFILE}/kernel ]; then
- . ${PROFILE}/kernel
- else
- VMLINUZ=( $( ls ${INSTLDIR}/boot | egrep ".*vmlinuz.*" ) )
- if [ ${#VMLINUZ[@]} -gt 1 ]; then
- echo "Error - more than 1 kernel found:"
- for k in ${VMLINUZ[@]}; do
- echo " $k"
- done
- return 1
- elif [ ${#VMLINUZ[@]} -ne 1 ]; then
- echo "Error - no kernel found"
- return 1
- fi
-
- # Discover kernel version
- KVERSION=""
- KVERSIONS=$( ls ${INSTLDIR}/lib/modules )
- for kv in ${KVERSIONS}; do
- # Check for 'build' symlink
- if [ -h ${INSTLDIR}/lib/modules/${kv}/build ]; then
- if [ -n "${KVERSION}" ]; then
- echo "Error - more than one set of kernel modules in ${INSTLDIR}/lib/modules"
- return 1
- fi
- KVERSION=${kv}
- else
- # Dubious set of modules found
- echo "WARNING:"
- echo " You seem to have installed a package containing modules"
- echo "which aren't compatible with your kernel."
- echo "Please check that this won't cause problems."
- echo "Maybe you need the corresponding package"
- echo "for your kernel?"
- km=$( find ${INSTLDIR}/lib/modules/${kv} -name "*.ko" | \
- sed "s|^${INSTLDIR}||" )
- pkgs=""
- for m in ${km}; do
- # Use pacman to find the owning package
- p=$( chroot ${INSTLDIR} pacman -Qo ${m} )
- # Extract the package name, and surround it with '|'s for easier matching
- pname="|$( echo "${p}" | cut -d " " -f 5 )|"
- # Only report each package once
- if [ -z "$( echo ${pkgs} | grep "${pname}" )" ]; then
- pkgs="${pkgs} ${pname}"
- echo ${p}
- echo " Package: $( echo "${pname}" | \
- sed "s/|//g" )"
- echo
- fi
- done
- # Await yes or no
- read -p "Continue? [y/N]: " ans
- if [ -z "$( echo ${ans} | grep '^ *[yY]' )" ]; then return 0; fi
- fi
- done
- fi
- if [ -z "${KVERSION}" ]; then
- echo "Error - couldn't find kernel modules"
- return 1
- fi
- echo "// Kernel version: ${KVERSION}"
- # Must regenerate kernel dependency files
- echo "// -> regenerating kernel dependencies"
- if [ -n "${INSTLDIR}" ]; then
- depmod -b "${INSTLDIR}" "${KVERSION}"
- else
- depmod "${KVERSION}"
- fi
- echo
-}
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/colors.lst b/build_tools/clarch/larch/cd-root/boot/grub/colors.lst
deleted file mode 100644
index faa9c8f..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/colors.lst
+++ /dev/null
@@ -1,36 +0,0 @@
-#color schemes - ganked from SGD ( http://freshmeat.net/projects/supergrub/?branch_id=62132&release_id=236631 )
-# TODO change these and make some more... specifically an "arch" theme
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to Main Menu
-configfile /boot/grub/menu.lst
-
-title Barlond
-color white/cyan yellow/blue
-
-title Barlond2
-color white/blue yellow/cyan
-
-title Simple Black
-color light-gray/black yellow/blue
-
-title Matrix
-color green/black light-green/green
-
-title Dalton Bros.
-color red/green green/red
-
-title Debian
-color cyan/blue white/blue
-
-title BW
-color light-gray/black black/light-gray
-
-title BW Inverse
-color black/light-gray
-
-title SGD Non Default
-color black/cyan yellow/black
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/help.lst b/build_tools/clarch/larch/cd-root/boot/grub/help.lst
deleted file mode 100644
index 13eeb42..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/help.lst
+++ /dev/null
@@ -1,16 +0,0 @@
-# Help files must be exactly 23 lines long.
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to main menu
-configfile /boot/grub/menu.lst
-
-title HOW-TO: Boot an existing system
-cat /boot/help/bootexisting.txt
-pause Press enter to continue...
-
-title HOW-TO: Contribute to this help
-cat /boot/help/contrib.txt
-pause Press enter to continue...
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/keyboards.lst b/build_tools/clarch/larch/cd-root/boot/grub/keyboards.lst
deleted file mode 100644
index b7a990e..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/keyboards.lst
+++ /dev/null
@@ -1,111 +0,0 @@
-#keyboard layouts - ganked from SGD ( http://freshmeat.net/projects/supergrub/?branch_id=62132&release_id=236631 )
-# TODO add other languages
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to Main Menu
-configfile /boot/grub/menu.lst
-
-title Default layout
-setkey
-
-title German layout
-setkey y z
-setkey z y
-setkey Y Z
-setkey Z Y
-setkey equal parenright
-setkey parenright parenleft
-setkey parenleft asterisk
-setkey doublequote at
-setkey plus bracketright
-setkey minus slash
-setkey slash ampersand
-setkey ampersand percent
-setkey percent caret
-setkey underscore question
-setkey question underscore
-setkey semicolon less
-setkey less numbersign
-setkey numbersign backslash
-setkey colon greater
-setkey greater bar
-setkey asterisk braceright
-
-
-title Spanish layout
-setkey
-setkey slash ampersand
-setkey ampersand caret
-setkey caret braceleft
-setkey asterisk braceright
-setkey parenleft asterisk
-setkey parenright parenleft
-setkey minus slash
-setkey equal parenright
-setkey quote minus
-setkey underscore question
-setkey question underscore
-setkey braceleft quote
-setkey braceright backslash
-setkey colon greater
-setkey greater bar
-setkey doublequote at
-setkey backslash backquote
-setkey less backslash
-setkey semicolon less
-setkey plus colon
-setkey at semicolon
-
-title French layout
-setkey
-setkey less backquote
-setkey greater tilde
-setkey ampersand 1
-setkey 1 exclam
-setkey tilde 2
-setkey 2 at
-setkey doublequote 3
-setkey 3 numbersign
-setkey quote 4
-setkey 4 dollar
-setkey parenleft 5
-setkey 5 percent
-setkey minus 6
-setkey 6 caret
-setkey backquote 7
-setkey 7 ampersand
-setkey underscore 8
-setkey 8 asterisk
-setkey backslash 9
-setkey 9 parenleft
-setkey at 0
-setkey 0 parenright
-setkey parenright minus
-setkey numbersign underscore
-setkey a q
-setkey A Q
-setkey z w
-setkey Z W
-setkey caret bracketleft
-setkey dollar bracketright
-setkey q a
-setkey Q A
-setkey m semicolon
-setkey M colon
-setkey bracketleft quote
-setkey percent doublequote
-setkey asterisk backslash
-setkey bracketright bar
-setkey w z
-setkey W Z
-setkey comma m
-setkey question M
-setkey semicolon comma
-setkey period less
-setkey colon period
-setkey slash greater
-setkey exclam slash
-setkey bar question
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/menu.lst b/build_tools/clarch/larch/cd-root/boot/grub/menu.lst
deleted file mode 100644
index 3783d81..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/menu.lst
+++ /dev/null
@@ -1,27 +0,0 @@
-timeout 5
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title Boot larch
-kernel /boot/vmlinuz
-initrd /boot/larch.img
-
-title Tools...
-configfile /boot/grub/tools.lst
-
-title Grub Settings...
-configfile /boot/grub/settings.lst
-
-title View Help...
-configfile /boot/grub/help.lst
-
-title More Options...
-configfile /boot/grub/more.lst
-
-title Shutdown the Computer
-halt
-
-title Reboot the Computer
-reboot
-
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/more.lst b/build_tools/clarch/larch/cd-root/boot/grub/more.lst
deleted file mode 100644
index 097d7d3..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/more.lst
+++ /dev/null
@@ -1,30 +0,0 @@
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to Main Menu
-configfile /boot/grub/menu.lst
-
-title [EXPERIMENTAL] Attempt existing Linux detection
-configfile /boot/grub/tryboot.lst
-
-title [EDIT ME] Diskless Boot (PXE / BOOTP)
-#TODO wtf?
-root (nd)
-kernel /vmlinuz26 ip=dhcp root=/dev/nfs nfsroot=192.168.1.2:/boot/dir
-
-title [EDIT ME] NFS Root Boot
-root (cd)
-kernel /vmlinuz26 ip=dhcp root=/dev/nfs nfsroot=192.168.1.2:/boot/dir
-
-title [EDIT ME] Boot Existing Linux Install
-root (hd0,0)
-kernel /vmlinuz26 root=/dev/hda3 ro
-initrd /kernel26.img
-
-title [EDIT ME] Boot Existing Windows Install
-rootnoverify (hd0,0)
-makeactive
-chainloader +1
-
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/settings.lst b/build_tools/clarch/larch/cd-root/boot/grub/settings.lst
deleted file mode 100644
index a2dfd3b..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/settings.lst
+++ /dev/null
@@ -1,13 +0,0 @@
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to Main Menu
-configfile /boot/grub/menu.lst
-
-title Keyboard settings
-configfile /boot/grub/keyboards.lst
-
-title Color settings
-configfile /boot/grub/colors.lst
diff --git a/build_tools/clarch/larch/cd-root/boot/grub/tools.lst b/build_tools/clarch/larch/cd-root/boot/grub/tools.lst
deleted file mode 100644
index 609962e..0000000
--- a/build_tools/clarch/larch/cd-root/boot/grub/tools.lst
+++ /dev/null
@@ -1,23 +0,0 @@
-timeout 300
-default 0
-color light-blue/blue black/light-grey
-splashimage=/boot/splash.xpm.gz
-
-title << Back to Main Menu
-configfile /boot/grub/menu.lst
-
-title Run memtest (Memory Testing)
-kernel /boot/memtest
-
-# http://www.vortex.prodigynet.co.uk/x86test/
-title Run x86test (CPU Info)
-kernel /boot/x86test_zImage.bin
-#wget http://www.vortex.prodigynet.co.uk/x86test/x86test_zImage.bin
-
-# http://home.san.rr.com/johninsd/pub/linux/lilo/boot/
-title LILO Diagnostic
-kernel /boot/diag2.img
-
-title Install GRUB to hd0 MBR
-root (hd0,0)
-setup (hd0)
diff --git a/build_tools/clarch/larch/cd-root/boot/help/bootexisting.txt b/build_tools/clarch/larch/cd-root/boot/help/bootexisting.txt
deleted file mode 100644
index 540e41f..0000000
--- a/build_tools/clarch/larch/cd-root/boot/help/bootexisting.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-HOWTO: Boot an existing install
-
-Select "More Options" from the main menu.
-Move the cursor to "[EDIT ME] Boot an existing linux install"
-Press "e"
-
-At this point you will see the following:
- root (hd0,0)
- kernel /vmlinuz26 root=/dev/hda3 ro
- initrd /kernel26.img
-
-This needs to be changed to accomodate your hardware.
-
-The first line should be changed to indicate where your boot medium resides.
- "(hd0,0)" is the first partition on the first hard drive (hda1) - change these
- numbers to indicate the partition containing your /boot directory.
-
-The second line should be changed to point to your kernel. If the line above
-points to a partition _only_ containing /boot, then /vmlinuz26 is fine.
-Otherwise, change this to /boot/vmlinuz. root= should be changed to match the
-partition for your root filesystem. Other kernel parameters can be added here.
-
-
-
diff --git a/build_tools/clarch/larch/cd-root/boot/help/contrib.txt b/build_tools/clarch/larch/cd-root/boot/help/contrib.txt
deleted file mode 100644
index a854a0b..0000000
--- a/build_tools/clarch/larch/cd-root/boot/help/contrib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-HOWTO: Contribute to these help files
-
-This help is rather simplistic.
-In order to provide help files or translations you simply need to make a text
-file. Formatting is important (due to grub limitations). The files MUST be 80
-characters wide, and 23 lines long. Any more, and your formatting will be
-corrupted when viewing the help. Please note that if your help is short, it is
-worthwhile to pad with empty lines, up to 23 lines.
-
-Please send any and all help files you wish to contribute, or any ideas for
-help, to arch@archlinux.org with "[isohelp]" in the title.
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/cd-root/boot/splash.xpm.gz b/build_tools/clarch/larch/cd-root/boot/splash.xpm.gz
deleted file mode 100644
index 9f128bf..0000000
Binary files a/build_tools/clarch/larch/cd-root/boot/splash.xpm.gz and /dev/null differ
diff --git a/build_tools/clarch/larch/cd-root/isolinux/bkgd.jpg b/build_tools/clarch/larch/cd-root/isolinux/bkgd.jpg
deleted file mode 100644
index b45b71f..0000000
Binary files a/build_tools/clarch/larch/cd-root/isolinux/bkgd.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index b37e4aa..0000000
--- a/build_tools/clarch/larch/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 50
-
-MENU BACKGROUND bkgd.jpg
-
-MENU TITLE larch live CD
-
-label linux
-MENU LABEL Default: no swap, no copy-to-ram
-kernel vmlinuz
-append initrd=larch.img
-# or with video mode for beyond kernel:
-#append initrd=larch.img video=vesafb:ywrap,mtrr,800x600@60
-
-label linux-c2r
-MENU LABEL larch copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL larch with swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
diff --git a/build_tools/clarch/larch/cd-root/isolinux/memtest b/build_tools/clarch/larch/cd-root/isolinux/memtest
deleted file mode 100644
index 3d0f46d..0000000
Binary files a/build_tools/clarch/larch/cd-root/isolinux/memtest and /dev/null differ
diff --git a/build_tools/clarch/larch/cd-root/isolinux/vesamenu.c32 b/build_tools/clarch/larch/cd-root/isolinux/vesamenu.c32
deleted file mode 100644
index 698198f..0000000
Binary files a/build_tools/clarch/larch/cd-root/isolinux/vesamenu.c32 and /dev/null differ
diff --git a/build_tools/clarch/larch/cd-root/larch/larchboot b/build_tools/clarch/larch/cd-root/larch/larchboot
deleted file mode 100644
index ab6c40a..0000000
--- a/build_tools/clarch/larch/cd-root/larch/larchboot
+++ /dev/null
@@ -1,2 +0,0 @@
-This file must be present in the CD/USB-stick /larch folder for the
-device to be recognized as the boot device.
diff --git a/build_tools/clarch/larch/cd-root/larch/save b/build_tools/clarch/larch/cd-root/larch/save
deleted file mode 100644
index 3d31560..0000000
--- a/build_tools/clarch/larch/cd-root/larch/save
+++ /dev/null
@@ -1 +0,0 @@
-The presence of this file enables session saving.
diff --git a/build_tools/clarch/larch/docs/CHANGES b/build_tools/clarch/larch/docs/CHANGES
deleted file mode 100644
index 188cf99..0000000
--- a/build_tools/clarch/larch/docs/CHANGES
+++ /dev/null
@@ -1,109 +0,0 @@
-2008.08.10
-Version 5.3.8
-Added pacman-packed.tar.gz to repository, a self-contained pacman package,
-including the libraries it needs to run. So now building on non-Arch
-systems shuold work again.
-Adjusted larch-setup to handle this new package.
-'mirrorlist' now has '@carch@', which getPackageServer must handle (done
-in PKGBUILD)
-
-2008.08.09
-Version 5.3.7
-The packages.txt file is no longer supplied in Arch repositories, so inpacs
-now gets the list of base packages using (something like) 'pacman -Sg base'.
-As of pacman-3.2 there is no longer a static build, so building larch systems
-on non-Arch boxes will no longer work:(
-Tweaked xmaxi profile.
-
-2008.07.30
-Version 5.3.6
-Remove unmaintained kde profile, replace mc-utf8 by mc in addedpacks
-
-2008.06.22
-Version 5.3.5
-Fix mklarch for building on non-Arch system:
- - need to create package cache, otherwise inpacs complains.
- - tweak pacman.conf configuration concerning 'Include =' lines.
- - usb2bootiso needs bash (#!/bin/bash, not #!/bin/sh)
- - xpack (and existing .xpk files) fix (bash, not sh, and -n option to tail)
-Try to overcome problems with usb-stick creation when hal remounts device
-after formatting, by adding umount command.
-
-2008.06.07
-Version 5.3.4
-Removed warnings about kconfig (as this is no longer included in Arch kernels.
-Added check for mkisofs on host at beginning of buildlive (if building iso).
-Added check for syslinux on target at beginning of buildlive (if not using
-GRUB).
-Minor profile tweaks.
-
-2008.05.15
-Version 5.3.2, adjusted initscripts approach so that it doesn't require a
-custom initscripts package. Now rc.sysinit and rc.shutdown are replaced (in
-buildlive) by larch versions which are compatible with the standard versions.
-When larch-live is installed, the standard functions will be replaced by
-larch functions. On installation using larchin larch-live will be removed
-so the behaviour reverts to standard Arch behaviour, although the rc scripts
-have been changed. But in any case the originals are saved so that they can
-be restored on installation with larchin.
-
-Changed handling of pacman.conf slightly. When there is a pacman.conf in the
-profile (base directory, not overlay), this will be copied to the working
-directory and used by mklarch, even if there was already a version in the
-working directory. The pacman.conf in the live system will be this version
-if built using mklarch, otherwise the existing version. However an
-'IgnorePkg' line is added for kernel26, aufs and initscripts. Packages
-listed in the 'noupdate' file in the profile, will also be added. This
-line will be removed on installation using larchin.
-
-2008.04.27
-Version 5.3.0, new initscripts approach, replacing functions in
-/etc/rc.d/functions rather than replacing /etc/rc.sysinit and
-/etc/rc.shutdown. At present this requires a custom initscripts package.
-
-2008.04.21
-Version 5.2.2, added usb2iso, a fairly primitive script to make an iso from
-a larch usb-stick. It also works from a running larch system, but only on
-systems with a lot of memory.
-
-2008.04.05
-version 5.2.1, slight reworking of overlay handling in profiles - now files
-owned by root:root do not have to be in overlay.xpk, they can be held within
-directory 'rootoverlay', and their ownership will be changed automatically.
-Files to be copied to /.livesys at boot are now in larch/copy.
-Added larchquit.py to larch-live - special larch quit/logout gui, allows
-selecting session-save options and also autologin user before quitting desktop,
-included it in xmini menu/panel.
-Other tweaks to xmini profile.
-
-2008.02.27
-Incompatible changes. WARNING!
-With version 5.2 the init system has changed, in particular a custom inittab
-is now required, which means all old profiles are likely to fail (because of
-the /etc/inittab in the overlay).
-
-2008.02.19
-added desktop stuff for documentation
-
-2008.02.18
-version 5.1.3, bugfixes and work on profiles
-documentation updates
-
-2008.02.14
-Reorganization of directory layout,
-new 'larchin' hard disk installer with gui.
-larch version 5.1.0
-larch-live version 5.1.0
-larchin version 5.1.0
-
-2008.01.13
-Adjustments for changes in pacman-3.1, version 5.0.8
-
-2008.01.02
-Fixes for merging when file paths contain spaces (merge_overlay), version 5.0.7
-
-2008.01.02
-larch-5 (with simplified union structure, no CD/DVD session save) available
-for testing.
-
-Initial test release, version 5.0.6.
diff --git a/build_tools/clarch/larch/docs/COPYING b/build_tools/clarch/larch/docs/COPYING
deleted file mode 100644
index d511905..0000000
--- a/build_tools/clarch/larch/docs/COPYING
+++ /dev/null
@@ -1,339 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-
- Copyright (C)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- , 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
diff --git a/build_tools/clarch/larch/docs/LICENCE b/build_tools/clarch/larch/docs/LICENCE
deleted file mode 100644
index b0e9208..0000000
--- a/build_tools/clarch/larch/docs/LICENCE
+++ /dev/null
@@ -1,16 +0,0 @@
-
- Licence:
-
- This software is released under the GNU GENERAL PUBLIC LICENSE.
- See COPYING.
-
- Warranty:
-
- This software is distributed with NO WARRANTY, use it at your own risk.
-
- Author:
-
- This software was written by
-
- Michael Towers (gradgrind at online dot de)
-
\ No newline at end of file
diff --git a/build_tools/clarch/larch/docs/README b/build_tools/clarch/larch/docs/README
deleted file mode 100644
index f212c35..0000000
--- a/build_tools/clarch/larch/docs/README
+++ /dev/null
@@ -1,37 +0,0 @@
-larch - scripts for building a highly customizable Arch Linux live CD/DVD
- - or USB-stick
- - also suitable for installing Arch Linux to a hard disk
-
-Author: Michael Towers (gradgrind at online dot de)
-Licence: GPL (see COPYING, LICENCE)
-
-
-I got my initial inspiration from the "Linux Live scripts" by
-
-Tomas M.
-
-BUT the larch scripts now bear essentially no resemblance to those,
-so don't blame Tomas!
-Thanks are, nevertheless, due to him for his great work, which helped me
-get started.
-
-The main documentation is in the share/docs subdirectory, please read it.
-
-The key components are:
-
- inpacs - Install a fresh Arch system (with customizable package
- selection), to a convenient (possibly temporary) location.
-
- mklarch - Uses 'inpacs' to build an Arch installation in a convenient
- directory, which it then makes into a live CD, adding
- modifications (in an overlay) to suit it for use as a live
- system and for customization.
-
- larchify - Build a larch live system from an existing Arch Linux
- installation (including from one made by 'mklarch').
-
-Logos are derived from the Arch Linux logos, and are released under a
-Creative Commons Licence, see 'http://www.archlinux.org/art'.
-
-The larch project uses Arch Linux as its basis, but is not an official
-Arch Linux ('http://www.archlinux.org') project.
diff --git a/build_tools/clarch/larch/docs/ReleaseNotes b/build_tools/clarch/larch/docs/ReleaseNotes
deleted file mode 100644
index b1923d8..0000000
--- a/build_tools/clarch/larch/docs/ReleaseNotes
+++ /dev/null
@@ -1,37 +0,0 @@
-2008.01.02
-larch-5 (with simplified union structure, no CD/DVD session save,
- extended USB-stick session save)
-
-Changes from larch-4:
-
-Split functionality of 'mklarch', so that rebuilds after a 'mklarch' run,
-and other builds from existing Arch installations, are now handled by the
-'larchify' script - 'larchify -h' for usage notes. 'mklarch' now only covers
-initial builds including installation - 'mklarch -h' for usage notes. Note
-that the options have changed!!! For instance, 'mklarch -p' now expects a
-directory as argument and there is no option to copy an example profile to
-the current directory.
-
-'pacin' replaced by 'inpacs' - 'inpacs -h' for usage notes. It is now
-possible to fully customize pacman caches, and even pacman databases,
-including the use of locally networked computers as source (using sshfs or
-NFS). Thus a larch build can be made without an internet connection, if
-all the packages are available locally on a suitably configured Arch
-system.
-
-Completely new union/overlay structure. The overlay is now copied to the
-writable union layer at boot, and can be copied back at shutdown. This
-should speed up session-saving, especially through the use of lzo
-compression rather than squashfs. An additional advantage is that no extra
-memory is required for the reconstruction of the archive.
-
-When the overlay gets too large it can be merged into the secondary overlay,
-a squashfs archive (like in previous larch versions). This takes somewhat
-longer and requires memory for its construction, but subsequent simple
-session saves (to the primary layer) will be faster because of the reduced
-size.
-
-It should now also be possible to run 'larchify' on a running live system,
-allowing a complete reconstruction of the system from within itself,
-merging in updates - in principle even kernel updates should be manageable
-using this method.
diff --git a/build_tools/clarch/larch/docs/Splash_howto b/build_tools/clarch/larch/docs/Splash_howto
deleted file mode 100644
index 32660bb..0000000
--- a/build_tools/clarch/larch/docs/Splash_howto
+++ /dev/null
@@ -1,35 +0,0 @@
-Using vesamenu this is now much easier ...
-
-For the vesamenu, it is called a background image, rather than splash
-image, because the menu appears on top of it.
-All you need is a 640x480 image in png or jpg format (the default image
-in larch is called bkgd.jpg)!
-
-=======================================================================
-
-But here are the old instructions, just in case ... (the utility programs
-are in the 'syslinux' package):
-
-Splash screen for isolinux/syslinux
------------------------------------
-
-This could be easier ...
-Anyway, it needs to be in a particular format. 640 pixels wide and quite
-a bit less than 480 pixels high (to leave space for the boot text).
-Then it may not use more than 16 colours. You can reduce the colour
-depth by setting indexed mode in the GIMP (image - mode). It may be
-sensible to use only 14 or 15 colours (to leave something for the
-text?) - but I didn't really investigate this further. I reduced
-my image to 14 colours.
-Then you can export it to a .ppm file, which serves as input to the
-perl script ppmtolss16, (which comes from the syslinux tarball -
-its inverse is lss16toppm, which is also in there):
-
-./ppmtolss16 < splash.ppm > splash.lss
-
-To test this, convert it back and take a look at the result:
-
-./lss16toppm < splash.lss > test.ppm
-
-Just replace the existing splash.lss file (in cd-root/isolinux) with your
-version.
diff --git a/build_tools/clarch/larch/docs/html/index.html b/build_tools/clarch/larch/docs/html/index.html
deleted file mode 100644
index 8584186..0000000
--- a/build_tools/clarch/larch/docs/html/index.html
+++ /dev/null
@@ -1,128 +0,0 @@
-
-
-
-
-
- larch introduction
-
-
-
-
-
-
-
-
-
-larch – a do-it-yourself live Arch Linux CD
-
-
-
-
-Introduction
-
-larch is a collection of scripts designed around the creation and
-use of live CD/DVD/USB-stick versions of Arch Linux.
-
-
-One design aim was easy customization, so that even relatively inexperienced
-users could build personalized live CDs (etc.), containing whatever packages they
-wanted and with their own personal configurations. The resulting medium should
-also be usable for installation purposes, so that one has a customized
-Arch Linux installation/rescue medium. As the content can be chosen
-freely, a comfortable working environment is possible - in contrast to
-the rather Spartan standard Arch installation CD.
-
-
-larch also offers a flexible approach to building your live media.
-You can use 'profiles' to determine what gets installed, and how it is
-configured. The advantage of this method is that all your specifications are
-kept together in a folder which can be used to rebuild the same or a similar
-system at a later date. Alternatively you can do a normal Arch Linux
-installation (if there is such a thing!) and then make a live medium from this.
-You can even 'livify' your existing installation (though it might be worth
-tidying it up a bit first ...).
-
-
-Squashfs offers convenient compression of the data on the CD so that
-up to about 2 GB of code can be included on a 700 MB CD. aufs (a
-'unification' file system, originally based on unionfs) offers
-the ability to write to all directories even though
-the CDROM is read-only, which allows such fancy stuff as installation
-of new software packages to the running live system. Using aufs
-you could do, say, 'pacman -S fluxbox' and fluxbox would be
-installed. The limit to the amount of overwriting is determined by the size of
-the available memory.
-
-
-All this would normally be gone when you reboot as the changes are
-really only stored in memory. However, thanks to various technical wizardry, it
-is also possible (on suitable media) to save any changes you make while running
-the live system back to the medium on shutdown.
-
-
-Hardware detection is provided by the same udev approach as is used
-in a standard Arch Linux system.
-
-
-The larch project comprises several components. The scripts for
-building a larch live medium are in the larch package, which need not
-itself be installed in the live system, though it may be useful. Scripts and
-data for the live environment are provided in the larch-live package,
-which must be installed in the live system. There is also an optional installer
-(larchin, written in python and bash, with a GTK interface) which
-can install the live system to hard disk, providing a convenient way to install a
-ready-configured Arch Linux system.
-
-
-I have tried to maintain the distribution-independence of the
-larch scripts, so that they can be used on other GNU/Linux systems -
-you shouldn't need an Arch Linux installation in order to build a larch
-live medium, the dependencies (e.g. bash, wget,
-mkisofs ) should be satisfied on pretty well any GNU/Linux system
-(and a static version of pacman can be downloaded). In other words,
-it should not be difficult to generate your own customized larch
-CD on pretty well any GNU/Linux system.
-But I must admit that this feature hasn't been tested much.
-
-
-As with most stuff around Arch Linux
-it's not really designed for beginners - you should know your
-way around a GNU/Linux system (preferably Arch!), and have at least a
-minimal idea of running command-line stuff and editing configuration
-files. In any case, I hope that the
-documentation will be clear enough to help anyone who wants to exploit
-larch to the full (feedback is welcome!).
-
-Requirement:
-You need quite a lot of space to create an Arch Linux live CD system - to build a
-700MB CD image you'll need up to about 4GB. That is because a complete Arch Linux
-system is installed, then a compressed ('squashed') verion is made, and then
-a CD image (iso). Building for a USB-stick requires slightly less space, as the
-iso-image is not built.
-
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch1.jpg b/build_tools/clarch/larch/docs/html/larch1.jpg
deleted file mode 100644
index 70e2f56..0000000
Binary files a/build_tools/clarch/larch/docs/html/larch1.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/docs/html/larch_docindex.html b/build_tools/clarch/larch/docs/html/larch_docindex.html
deleted file mode 100644
index 0654d69..0000000
--- a/build_tools/clarch/larch/docs/html/larch_docindex.html
+++ /dev/null
@@ -1,126 +0,0 @@
-
-
-
-
-
- larch documentation
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Table Of Contents
-
-This documentation covers larch version 5.3
-
-
-
- - Introduction
-
- - Features
-
- - Quick Start
-
- - larch Overview
-
-
-
- - Profiles
-
-
-
- - Structure of a larch live CD
-
-
-
- - /etc/fstab
-
-
-
- - Session saving
-
-
- - ssh access
-
-
-
- - Running the live system
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_features.html b/build_tools/clarch/larch/docs/html/larch_features.html
deleted file mode 100644
index 23d1c35..0000000
--- a/build_tools/clarch/larch/docs/html/larch_features.html
+++ /dev/null
@@ -1,137 +0,0 @@
-
-
-
-
- larch features
-
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Features
-
-
-
- -
-
Built from standard Arch Linux packages
-
-
- -
-
Only minimal changes made to enable functioning as live CD, the
-system is essentially pure Arch Linux
-
-
- -
-
Can also build live USB-sticks
-
-
- -
-
Can also build from existing Arch installation
-
-
- -
-
Can use standard Arch kernel ('kernel26'), no kernel build necessary
-
-
- -
-
Fully customizable package selection
-
-
- -
-
Can use isolinux or GRUB bootloader
-
-
- -
-
Automatic generation of /etc/fstab based on device detection;
- can also detect LVM volumes (when configured to do so)
-
-
- -
-
Does not require an Arch Linux system to build it, any modern GNU/Linux system should suffice
-
-
- -
-
Can be used to install Arch Linux to hard disk - either the full live CD content
-or using ftp to install any desired packages in their latest versions
-
-
- -
-
Uses latest udev-based hardware detection
-
-
- -
-
Based on squashfs, aufs, initramfs (using standard Arch mkinitcpio)
-
-
- -
-
Changes made during a session can be saved back to the boot medium
- (assuming it is writable - USB-stick, hard-disk, etc.)
-
-
- -
-
Full graphical system possible, e.g. with KDE, OpenOffice, GIMP, ...
-
-
- -
-
Using ssh it's possible to run this CD/USB-stick on a system without
-monitor/keyboard - remote installation and rescue is also possible
-
-
- -
-
Copy to RAM possible, using boot parameter ('c2r')
-
-
- -
-
Optional use of existing swap partition ('swap' boot parameter)
-
-
- -
-
Simple text configuration files
-
-
- -
-
Extensive documentation
-
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_fstab.html b/build_tools/clarch/larch/docs/html/larch_fstab.html
deleted file mode 100644
index 8589ccd..0000000
--- a/build_tools/clarch/larch/docs/html/larch_fstab.html
+++ /dev/null
@@ -1,87 +0,0 @@
-
-
-
-
- /etc/fstab
-
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-/etc/fstab and mount points
-
-The file /etc/fstab determines mount points for the various devices and partitions
-available in the system. This is of course different in every computer, so a live CD
-has to be pretty flexible here. larch handles this by regenerating this file
-each time it boots, basing the content on the devices it discovers in the present system.
-
-
-Disk partitions are not mounted automatically by larch, as one of the main
-purposes was to act as an installation CD - for partitioning and formatting the
-partitions must be unmounted. But each detected disk partition and CDROM device should
-get an entry in '/etc/fstab' and a corresponding mount point in '/mnt'. Thus they
-can be mounted using 'mount /mnt/DEVICE' (or by using, say, KwikDisk in KDE).
-
-
-It may however, under certain circumstances, be desirable to have a persistent
-'/etc/fstab'. This can be achieved by placing "#KEEP" (without the quotation marks)
-at the beginning of a line in '/etc/fstab'. This could be done when making the
-original CD by putting the desired '/etc/fstab' file in the overlay,
-or else - in the case of a rewritable boot medium (e.g. USB-stick) - by
-editing '/etc/fstab' while running the live system and then performing a session
-saving reboot.
-A new '/etc/fstab' (and the associated mount points in '/mnt') can be generated
-at any time while running larch, by executing 'gen_fstab -l'.
-This might be useful after repartitioning, for example. When the '-l' option is
-omitted, no updates are made, but the proposed changes are saved to '/tmp/fstab'
-and '/tmp/mnt'.
-
-
-LVM
-
-larch can also handle LVM volumes, including automatically
-generating entries in '/etc/fstab' and mount points in '/mnt'.
-This must however be enabled
-in '/etc/rc.conf' (e.g. by putting the required entries in 'rcconfx' in the
-profile used to build the larch system). USELVM="yes" must
-be set and the module 'dm-mod' must be loaded (this is done
-automatically when USELVM="yes" is set). The supplied 'mini2' and 'xmini' example
-profiles contains this feature, and can thus be taken as an example.
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_intro.html b/build_tools/clarch/larch/docs/html/larch_intro.html
deleted file mode 100644
index 8584186..0000000
--- a/build_tools/clarch/larch/docs/html/larch_intro.html
+++ /dev/null
@@ -1,128 +0,0 @@
-
-
-
-
-
- larch introduction
-
-
-
-
-
-
-
-
-
-larch – a do-it-yourself live Arch Linux CD
-
-
-
-
-Introduction
-
-larch is a collection of scripts designed around the creation and
-use of live CD/DVD/USB-stick versions of Arch Linux.
-
-
-One design aim was easy customization, so that even relatively inexperienced
-users could build personalized live CDs (etc.), containing whatever packages they
-wanted and with their own personal configurations. The resulting medium should
-also be usable for installation purposes, so that one has a customized
-Arch Linux installation/rescue medium. As the content can be chosen
-freely, a comfortable working environment is possible - in contrast to
-the rather Spartan standard Arch installation CD.
-
-
-larch also offers a flexible approach to building your live media.
-You can use 'profiles' to determine what gets installed, and how it is
-configured. The advantage of this method is that all your specifications are
-kept together in a folder which can be used to rebuild the same or a similar
-system at a later date. Alternatively you can do a normal Arch Linux
-installation (if there is such a thing!) and then make a live medium from this.
-You can even 'livify' your existing installation (though it might be worth
-tidying it up a bit first ...).
-
-
-Squashfs offers convenient compression of the data on the CD so that
-up to about 2 GB of code can be included on a 700 MB CD. aufs (a
-'unification' file system, originally based on unionfs) offers
-the ability to write to all directories even though
-the CDROM is read-only, which allows such fancy stuff as installation
-of new software packages to the running live system. Using aufs
-you could do, say, 'pacman -S fluxbox' and fluxbox would be
-installed. The limit to the amount of overwriting is determined by the size of
-the available memory.
-
-
-All this would normally be gone when you reboot as the changes are
-really only stored in memory. However, thanks to various technical wizardry, it
-is also possible (on suitable media) to save any changes you make while running
-the live system back to the medium on shutdown.
-
-
-Hardware detection is provided by the same udev approach as is used
-in a standard Arch Linux system.
-
-
-The larch project comprises several components. The scripts for
-building a larch live medium are in the larch package, which need not
-itself be installed in the live system, though it may be useful. Scripts and
-data for the live environment are provided in the larch-live package,
-which must be installed in the live system. There is also an optional installer
-(larchin, written in python and bash, with a GTK interface) which
-can install the live system to hard disk, providing a convenient way to install a
-ready-configured Arch Linux system.
-
-
-I have tried to maintain the distribution-independence of the
-larch scripts, so that they can be used on other GNU/Linux systems -
-you shouldn't need an Arch Linux installation in order to build a larch
-live medium, the dependencies (e.g. bash, wget,
-mkisofs ) should be satisfied on pretty well any GNU/Linux system
-(and a static version of pacman can be downloaded). In other words,
-it should not be difficult to generate your own customized larch
-CD on pretty well any GNU/Linux system.
-But I must admit that this feature hasn't been tested much.
-
-
-As with most stuff around Arch Linux
-it's not really designed for beginners - you should know your
-way around a GNU/Linux system (preferably Arch!), and have at least a
-minimal idea of running command-line stuff and editing configuration
-files. In any case, I hope that the
-documentation will be clear enough to help anyone who wants to exploit
-larch to the full (feedback is welcome!).
-
-Requirement:
-You need quite a lot of space to create an Arch Linux live CD system - to build a
-700MB CD image you'll need up to about 4GB. That is because a complete Arch Linux
-system is installed, then a compressed ('squashed') verion is made, and then
-a CD image (iso). Building for a USB-stick requires slightly less space, as the
-iso-image is not built.
-
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_live_system.html b/build_tools/clarch/larch/docs/html/larch_live_system.html
deleted file mode 100644
index 5cd6f40..0000000
--- a/build_tools/clarch/larch/docs/html/larch_live_system.html
+++ /dev/null
@@ -1,155 +0,0 @@
-
-
-
-
- larch live system structure
-
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Structure of a larch live CD
-
-The vast majority of the code that runs in a live CD/USB system is exactly
-the same as in a normal system running from hard disk.
-The main differences arise through the live CD/USB system being based on
-a read-only root file-system, so various adjustments are necessary to
-make the areas that must be writable appear to be so. I say 'appear to be'
-because in general any changes will be lost when the system shuts down,
-the actual changes being made only in a RAM-based filesystem (but see
-"Session saving").
-
-
-squashfs and aufs
-
-In larch, as in many other live CD/USB systems, the ability to (apparently)
-write to a read-only file-system is provided by aufs (originally
-derived from unionfs).
-The file-system is also compressed, using squashfs, so as to fit more data
-onto the storage device (normally about 2GB of uncompressed code and data
-can be squeezed onto a 700MB CDROM using this approach). A custom
-Arch Linux installation (you can choose which packages are installed) is
-compressed into a squashfs file-system in the file
-system.sqf, which is placed in the root directory of the boot device.
-
-
-For use in a live CD/USB system a few changes must be made to some files in the
-installation. In larch this is (at first) not done directly, the installed
-system is left in a 'clean' state. Instead of that, an additional union layer
-is created, in the archive mods.sqf,
-containing all the modified files (except those in /etc, which are placed in the
-top, writable, union layer, which is saved in the overlay.ovl archive.
-The user is free to include (pretty well) any customizations (s)he wants in these
-overlay files. These files are also placed in the root directory of the boot device.
-
-
-These system archives are combined when the live CD/USB system
-boots. They are mounted as branches of a union file-system with
-the overlay above the 'standard' system, so that files in the overlay have
-priority over the original ones. The top layer of the union is a tmpfs
-writable layer (thus, effectively, making the whole system writable),
-into which the archive overlay.ovl is unpacked during booting.
-As the changes are only stored in RAM, they will, however, be lost when the system shuts
-down (unless using the session saving feature).
-
-
-initramfs and mkinitcpio
-
-It is, in general, not possible to boot directly into a live CD/USB system.
-Some form of 'initrd' or 'initramfs' is required, in order to find the boot
-device, get hold of the file-system and prepare it for running.
-Many modern GNU/Linux systems use initrd/initramfs (the former being now deprecated)
-as a matter of course, for loading the necessary kernel modules, and
-Arch Linux is no exception, a modular initramfs system (mkinitcpio)
-being the standard way to boot Arch Linux, and larch also takes
-advantage of it, although some additions need to be made to boot live CD/USB systems.
-
-
-/etc/inittab, /etc/rc.sysinit and /etc/rc.shutdown
-
-The initial boot script and the shutdown script must be customized for use
-in a larch live environment. There are numerous ways of achieving that and
-larch has tried out several. In version 5.3.2 a method was introduced which
-involves replacing the original /etc/rc.sysinit and /etc/rc.shutdown scripts
-by modified versions which are fully equivalent to the official scripts but
-split off certain parts into functions which can be overridden when used in a
-larch live system. The 'larch-live' package provides the files
-/etc/larch-sysinit and /etc/larch-shutdown which provide the new versions
-of these functions for live use.
-
The need to overwrite certain system files is a bit messy, and means that
-the initscripts package should not be updated in the live system, but I
-hope the official package will sometime itself contain suitable versions of the
-'/etc/rc.sysinit' and '/etc/rc.shutdown' files which separate out the
-relevant functions so that larch doesn't need to overwrite them.
-
-Although it is not strictly necessary (because the substituted files are
-fully equivalent to the official ones), larch saves the originals as
-'/etc/rc.sysinit.larchsave' and '/etc/rc.shutdown.larchsave', so that these
-can be restored on installation by larchin (this might avoid later
-confusion).
-
-
-It is possible to use a customized version of '/etc/inittab', by
-putting the new version in the profile (in 'rootoverlay') - for
-example one could customize the handling of the first terminal, e.g. to
-allow automatic login.
-The original inittab is saved as '/etc/inittab.larchsave',
-so that it can be restored if the system is installed using larchin.
-
-
-One addition in the larch version of the initscripts is the
-automatic generation of a new '/etc/fstab' (using the script
-gen_fstab, which
-bases the result on the devices which are detected in the system). Otherwise
-it behaves much the same as the version in
-a normal Arch Linux system. However, the remount of the root-filessystem and
-file-system checks have been left out as they are not relevant in a live-CD
-environment. No partitions are mounted and, by default, swap is not enabled.
-The reason is primarily that for use as an installation CD, it is better not
-to have any partitions mounted, because it is quite likely that the partitions
-will be edited in preparation for the installation. Passing boot parameter
-'swap' will enable swap if there is a suitable partition (or it can be done
-manually using 'swapon -a').
-
-
-'/etc/rc.shutdown' is adapted by
-adding code to deal with session-saving (writing changes back to the boot medium)
-and to eject the live-CD. Unlike in the normal version, the hardware clock is not reset.
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_overview.html b/build_tools/clarch/larch/docs/html/larch_overview.html
deleted file mode 100644
index 3bf38fb..0000000
--- a/build_tools/clarch/larch/docs/html/larch_overview.html
+++ /dev/null
@@ -1,383 +0,0 @@
-
-
-
-
- larch overview
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Overview of the larch build system
-
-
-
-Warning
-
-Before we get started I should point out that most of the scripts need to
-be run by the 'root' user. That is quite normal for an installer, but it is somewhat
-risky - a slight slip and all sorts of damage could be done. Ideally you would
-have a machine specially set aside for this sort of thing, i.e. one without any
-important data on it. You have been warned!
-
-
-
-Installation of the larch build system
-
-The larch package may be installed in the normal Arch Linux way using
-pacman. This method will only work on an Arch system, of course.
-
-
-Alternatively, larch may be used without installing it.
-This should also work on non-Arch Linux systems. Download
-larch-setup
-to an empty working directory and run it (it is a shell script). This will in
-turn download and unpack the current larch package, setting up symlinks so that
-the build scripts can be run from this working directory.
-If you don't put this new directory on your 'PATH', you may well
-need to add a path prefix when running it (e.g. './mklarch' if your current
-directory is the one containing the script).
-
-
-Using the larch build system
-
-For building a live medium from a 'profile' you need, primarily, mklarch;
-for building from an existing installation (including rebuilding after using
-mklarch) larchify. mklarch
-uses inpacs to do the actual installation of the packages,
-and the functions for performing the live CD creation are in the file
-(larch/)buildlive.
-
-
-Unlike a normal installation, that used by larch need not be a separate partition,
-it can be placed anywhere convenient.
-The default installation directory ('/home/larchroot', variable 'INSTLDIR' in the scripts)
-should normally be acceptable (the building work is done in the '.larch' sub-directory).
-Note that lots of space is necessary in ${INSTLDIR}, nearly 4GB for a 700MB CD.
-
-
-Quick mklarch overview
-
-That first stage is very much like a normal Arch installation to a
-partition - which is another possibility with the inpacs script.
-A couple of small tweaks are made to this base installation to make it more
-convenient for live CD/USB use: some glibc locales are generated (set by the file
-locale.gen in the profile) and, if openssh is installed, the initial
-ssh-keys are generated.
-
-
-Before mklarch can be used a 'profile' for the live medium must
-be built. This is a folder containing configuration files determining which packages
-are installed, which glibc locales are installed, and generally which files should
-be customized. Further details are given in 'Profiles'.
-
-
-A simple way to build an iso would then be:
-
./mklarch -p myprofile
-
-
-To build a live USB-stick using GRUB to boot and using the pacman
-databases as they exist on the build host (rather than the default of
-downloading the latest databases using 'pacman -Sy'):
-
./mklarch -p myprofile -y /var/lib/pacman -ug
-
-
-The build process can be stopped after the Arch system installation (before building
-the 'squashed' live system) by passing the '-a' option to mklarch.
-All the available options can be seen by running 'mklarch -h'.
-
-
-The rest of the build process is handled by the functions in
-buildlive, primarily mklive,
-which puts all the various components together into a CD image at
-'${INSTLDIR}/.larch/cd', then using the build_iso function
-to create the iso or (using the usbboot script) to prepare
-a bootable USB-stick.
-
-
-If you set up your configuration
-wrong (or if you or I made some other mistake ...), you might find
-you have destroyed some important data and/or your system doesn't
-work any more. But that's life - Share and Enjoy!
-
-
-Quick larchify overview
-
-larchify uses the functions in buildlive to
-build a live medium from an existing Arch Linux installation. It can also be
-used to rebuild a (posibly altered) live medium from the installation arising
-from the use of mklarch. For example, after building an iso
-using mklarch, you might want to build another with the same packages
-but with a changed overlay - maybe an alteration to rc.conf. In that case you
-could make the necessary changes to the profile and call:
-
./larchify -rp myprofile
-The '-r' option causes the old squashed image to be used, which can save a lot
-time. To see all the options run './larchify -h'.
-
-
-Minimal build system requirements
-
-The larch scripts have been designed to work without heavy
-demands on the build system. Although they have been developed under Arch Linux,
-they should run on other GNU/Linux systems. The required software has been
-kept to a minimum by means of a sort of bootstrapping - some of the build
-functions are carried out on the newly installed Arch system using chroot.
-For example, you do not need support for squashfs or aufs on
-the build system. bash, mkisofs and wget
-are assumed to be available (for building a USB-stick version with syslinux you
-also need mkfs.vfat from the 'dosfstools' package). If you are not
-running Arch Linux, the installation script
-(larch-setup) will set up pacman using a special package
-available from the larch repository (pacman-packed.tar.gz), which contains
-in addition to the pacman binary the run-time libraries it needs.
-
-
-'pacman.conf' for building and live system use
-
-You also need an appropriate 'pacman.conf' file. On a non-Arch system,
-unless a pacman.conf is already present in the working directory, this will be
-created afresh and a dialog will be presented by larch-setup
-to select a mirror. Because of potential overwriting (see below) this file
-is also copied to pacman.conf.0 (also in the working directory).
-
-On an Arch system it is assumed that you have already configured your
-mirrors appropriately, and the system '/etc/pacman.conf' can be taken.
-
-When there is a 'pacman.conf' in the profile (base directory, not overlay),
-this will be copied to the working directory and used by mklarch
-for performing the installation, even if
-there was already a version in the working directory. The 'pacman.conf' in
-the resulting live system will also be this version if built using
-mklarch (i.e. taken from the resulting file in the working
-directory). If larchify is used the existing '/etc/pacman.conf'
-within the system to be larchified will be used. However, if the overlay in
-the profile has its own '/etc/pacman.conf' this will (in both cases) be
-used in preference.
-
-Additionally, an 'IgnorePkg' line is added to the live system's '/etc/pacman.conf',
-for 'kernel26', 'aufs' and 'initscripts'. Packages listed in the 'noupdate' file
-in the profile, will also be added.
-This line will be removed on installation using larchin.
-
-
-squashfs and aufs
-
-The newly installed system is made into a squashed file-system in the
-file system.sqf. This is mounted as the lower layer of a union
-(aufs) file-system. On top of that there is a writable
-tmpfs so that the file-system as a whole appears writable. An 'overlay'
-archive is copied into the writable layer. As this top layer is compressed using
-lsop, this package must be installed in the target.
-Of course only the tmpfs top layer can actually be written to,
-and its contents disappear when the system reboots, so the writing is only
-temporary.
-
-
-There is also a second overlay archive, a squashed file system which forms
-the middle layer of the union file-system, which increases the flexibillity of
-the session saving facility.
-
-
-In order to boot into a system constructed in that manner, you need an
-initramfs which deals with mounting all the various bits in the right
-way before entering the normal boot sequence. In larch the
-initramfs is built using the standard Arch 'mkinitcpio' system, for
-which special 'hooks' (essentially code plug-ins) have been developed to
-manage the requirements of a larch live system.
-
-
-aufs as an alternative to unionfs
-larch was initially designed around unionfs, but since then
-aufs has been generally a more reliable alternative, and is now
-available as a package in Arch Linux. In order to use aufs its
-kernel module needs to be installed (which, if using mklarch, can be
-achieved by placing package 'aufs' in addedpacks), the rest
-will then be handled automatically. N.B. As unionfs
-hasn't been tested for a long time (all development work is done using
-aufs) and the current 'overlay merge' only works with aufs,
-it is strongly recommended that aufs be used.
-
-
-Partial rebuilding
-
-If you make some changes to a build which don't require a renewed
-installation (the Arch installation in '${INSTLDIR}'), you can use the
-larchify script to rebuild the system. Such changes might
-be tweaks to the overlay, or 'rcconfx', for example (but note that the glibc
-locales are in the installation so if you want to change these, you have to rerun the
-whole installation, or handle that manually). If - as is likely - the squashed system
-from the previous build is still there and is still valid,
-this can be reused by passing the '-r' option (thus saving the time required to
-squash the system).
-
-
- If you only make changes to files in '${INSTLDIR}/.larch/cd', you can rebuild
-the iso using the '-i' option to larchify. But be aware that
-some of the files in the directories 'isolinux' (when using the
-isolinux bootloader) and 'boot' (when using the GRUB bootloader)
-are renewed from 'larch/cd-root' and the 'cd-root' directory in the profile.
-
-
-N.B. Even though the Arch installation is
-in principle now redundant, you shouldn't delete it if you want to do a quick
-rebuild using larchify, because this installation is used (via 'chroot')
-for some of the build functions.
-
-
-Custom packages
-
-It is possible to include your own 'custom' packages in the installation.
-Maybe ones you have compiled yourself, e.g. from the AUR, or modified versions
-(fixes or customizations) of standard packages. To do this you need to put your
-packages in a directory and run gen-repo - which requires python -
-on this directory (run it without arguments to get usage instructions). Then place
-an entry for this new repository in your 'pacman.conf' (in the profile or else
-in the working directory).
-If your packages replace some in the existing repositories, your custom
-repository needs to come before those repositories in 'pacman.conf'.
-Any packages you want installed now just need to be
-listed in addedpacks.
-
-
-It is not necessary to build a custom kernel for larch, the
-standard kernel ('kernel26') can be used. It includes unionfs
-and squashfs modules, and is now included in the set of 'base'
-packages. If aufs is desired (which is likely, as at the time of writing,
-unionfs didn't work very well), this must be included in
-addedpacks.
-
-
-Generating
-the basepacks list
-
-In case the base package set changes, inpacs uses the list
-provided by 'pacman -Sg base' by default. However, if there is a 'basepacks'
-file in the profile this will be used to supply the list of base packages
-(one package per line).
-
-
-inpacs can also be used separately for Arch installation.
-To get a full listing of possible options run it without arguments (note that
-it pays no attention to profiles, all options must be passed explicitly).
-
-
-It is possible to filter out certain unwanted packages from the base set.
-In most cases the default setting will be satisfactory, but you can change it by
-placing a 'baseveto' file (one package per line) in the profile directory.
-Be aware, however, that vetoed packages will be installed anyway if they are
-required by some other installed package.
-
-
-addedpacks
-
-This group of packages is the main place for defining your system.
-Here you can enter all the applications you would like in your live CD/USB system
-(and subsequently installed to a hard disk partition, if that was your intention).
-Thanks to pacman you don't need to sort out dependencies,
-these should all be included automatically. It is (still) possible to
-squeeze (or rather 'squash') quite a respectable quantity of software
-onto a CD - my first experiments included most of KDE,
-OpenOffice, K3b, GIMP, and quite a lot
-besides.
-
-Installation of the initial system
-
-The foundation of the larch live CD/USB system is an initial,
-potentially unconfigured Arch Linux system squashed up in the file
-'system.sqf'. The installation of this system is can be handled by mklarch,
-which uses inpacs, which in turn uses pacman to
-install all the constituent packages using
-the '-r' option to install to the chosen location, which can be anywhere where
-there is enough space.
-
-By default the package cache on the build host will be used, so that only
-packages which have not already been downloaded will be fetched from the
-chosen mirror. The '-c' option to mklarch allows another
-cache location to be used. Note that this can also be on a remote machine,
-mounted using sshfs or NFS.
-
-
-Making a live CD from an existing Arch
-installation
-
-As mentioned above, larchify can be used to make a live
-medium from an existing Arch installation, using the mount point of the
-installation as argument. The installation must already be mounted, including any
-sub-mounts (e.g. /home on another partition). The main mount must be with
-options 'exec,dev', because some of the building is done via a chroot
-to the installation.
-
-
-It can also 'livify' the currently running (Arch only!) system, by
-passing '/' as argument.
-
-
-All aspects of the larch building process connected with the installation
-are in this case irrelevant, as it is assumed that the installation is already complete.
-The handling of 'profiles' is also different as these are largely
-concerned with the installation process. A profile may still be used, though,
-maybe to customize the 'mkinitcpio.conf' used to build the live system's
-initramfs, or to add extra content by means of the cd-root
-folder, for example.
-
-
-In order to support building a larch system, certain packages outside
-the Arch base group must be installed in the system to be 'larchified':
-
squashfs-tools, lzop, larch-live,
-aufs (if - recommended - you want to use that instead of unionfs),
-syslinux (if using isolinux or syslinux),
-cdrkit (for building an iso),
-eject (to eject a CD at shutdown).
-
-for the hard-disk installer - larchin, python, pygtk,
-parted, ntfsprogs,
-(optional, but recommended) gparted.
-
-for this documentation, and for the capability of doing complete
-rebuilds - larch
-
-
-
-Note that some things in '/var' will not be included in the 'live' system.
-Firstly, the standard pacman package cache, '/var/cache/pacman/pkg'.
-Also the log files (in '/var/log') and '/var/tmp' (temporary files, like '/tmp')
-are not saved. As some files in '/var/log' are required for certain aspects of
-logging to function, these are recreated (as empty files) in the resulting
-'system.sqf'.
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_profiles.html b/build_tools/clarch/larch/docs/html/larch_profiles.html
deleted file mode 100644
index 68db618..0000000
--- a/build_tools/clarch/larch/docs/html/larch_profiles.html
+++ /dev/null
@@ -1,167 +0,0 @@
-
-
-
-
- larch profiles
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-
-Profiles
-
-This feature of the larch scripts allows bundling
-all the configuration information for a particular live CD 'design' into
-a single directory. That includes the list of packages to be installed, locale
-information and the particular tweaks and additions needed to customize the CD,
-in particular a subdirectory containing the 'overlay' files - those files
-which have been changed from their initial fresh state after installation
-and those which have simply been added.
-
-
-In order to allow more flexibility with the overlay, larch now
-provides two mechanisms for providing overlay files. The simplest is by
-means of the directory 'rootoverlay' - everything in this directory will be
-copied to the live system overlay and its ownership will be changed to
-'root:root'. In case it is desired to include files with other ownerships,
-these must be packed up with the correct ownerships into the file 'overlay.xpk'
-using the xpack packing utility (supplied with larch, see
-below). This requires some care, but is a little safer than, say, a 'tar.gz'
-archive because it has an option to pack so that only root can unpack the
-archive.
-In general however the 'rootoverlay' directory should be adequate, and
-much of the tweaking may be done in situ (i.e. within a running
-live USB system), using a utility - see
-'Session saving' - to recreate
-the compressed overlay file-system (overlay.ovl).
-
-
-If you would like to have a look at a profile, look in the 'profiles'
-directory in the distribution. Each of its subdirectories is a profile, the
-subdirectory name is also the profile name. If you want to make your own
-profile, it is probably easiest to start with one of the examples. Copy it to a
-working directory and rename it appropriately.
-
-
-After editing to your heart's content, you can build the corresponding live
-CD system with the call:
-
- (path/to/)mklarch -p directory
-
-where 'directory' is your profile directory.
-
-
-The important files within a profile are described below:
-
-
- - addedpacks - a simple list of packages (just package
- name as supplied to 'pacman -S', e.g. 'syslinux', not the file name), one per line,
- comment lines start with '#'.
- This is the primary place for configuring which packages are installed.
-
-
- - locale.gen - mklarch prefixes this profile
- file (if it is present) to the file '/etc/locale.gen' in the newly installed
- system and runs 'locale-gen' (using chroot) to deal with glibc
- locale generation.
- So just put the locales you want in here.
-
-
- - rcconfx - This is a list of modifications for '/etc/rc.conf'.
- It contains those variable definitions which are different to the default
- values. This is then merged with the original to produce a modified overlay file.
-
-
- - rootoverlay - The files in this directory are effectively
- copied on top of the original system - as an overlay. They (potentially)
- form the bulk of the customization for the live system.
-
-
- - overlay.xpk - As described above this is a self-extracting
- archive of 'overlay files', which can be used as an alternative to 'rootoverlay'
- for non-root owned files.
-
-
- - mkinitcpio.conf - This file is optional. If it is present it will
- replace the version in the 'lib/initcpio' folder of the
- larch-live package to produce the initramfs
- for the live CD. You should take that file as the starting point to ensure that
- the necessary larch hooks are installed, but you are free to change other hooks
- (e.g. use 'ide' instead of 'pata') or add modules.
-
-
- - basepacks - This file is optional. If it is present it
- supplies a list of packages (one package per line, as addedpacks) to be
- used instead of the standard list of 'core/base' packages for the basis of the
- installation done by mklarch, preventing the 'packages.txt' file from the
- 'core' repository from being downloaded and used as source for the base package list.
-
-
- - baseveto - This file is optional. It provides a list of
- packages (one package per line) to be ignored in the base package list.
-
- - cd-root - This directory contains files to configure the bootloader.
- Those for isolinux are in the directory 'isolinux', which is copied to the
- root CD directory when the isolinux bootloader is chosen. Those for
- GRUB are in the directory 'boot', which is copied to the
- root CD directory when the GRUB bootloader is chosen. Here you can
- configure things like boot menus and splash screens.
- Anything in the 'cd-root' folder will be copied directly to the root of the live medium, so
- if there is anything else you want on your medium, you can put it in here.
-
-
-
-xpack and non-root owned overlay files
-To include non 'root:root' owned files in an overlay, create a directory
-somewhere called 'overlay' and place all the desired files therein with the
-correct paths, ownerships and permissions. Then run
-
- xpath -r overlay overlay.xpk
-
-(from within the directory containing 'overlay'). The resulting 'overlay.xpk'
-file should then be placed in your profile directory.
-If you want to unpack such an overlay archive, you need to be root, go to the
-directory containing it and run
-
- ./overlay.xpk .
-
-(don't miss the final '.', the unpacker needs an existing
-directory as parameter).
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_quick.html b/build_tools/clarch/larch/docs/html/larch_quick.html
deleted file mode 100644
index 4500f5d..0000000
--- a/build_tools/clarch/larch/docs/html/larch_quick.html
+++ /dev/null
@@ -1,108 +0,0 @@
-
-
-
-
- larch quick start
-
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Quick Start
-
-
-
-A quick run through of the steps necessary to build your own larch CD.
-This should provide you with a working live CD, but to take full advantage of
-the flexibility offered by the larch build system you will probably need
-to consult the rest of the documentation.
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_running.html b/build_tools/clarch/larch/docs/html/larch_running.html
deleted file mode 100644
index e0d28f3..0000000
--- a/build_tools/clarch/larch/docs/html/larch_running.html
+++ /dev/null
@@ -1,169 +0,0 @@
-
-
-
-
- running larch
-
-
-
-
-
-
-
-
-
-larch
-–
-a do-it-yourself live Arch Linux CD
-
-
-
-
-Running a larch live-CD/USB system
-
-Of course the details depend on what you have installed and how you have
-configured it. For example, the 'mini2' example profile builds a console-only system,
-the 'xmaxi' profile boots to xfce4.
-
-
-One thing worth noting is that these supplied profiles automatically login
-to the root account, which - potentially - allows all sorts of 'dangerous' actions,
-like reformatting your disks or making a mess of your file-systems in other ways.
-This is because one of the main raisons d'être for larch is its use
-as an Arch-installation-and-rescue medium. For this, you need root access.
-However, if you want to use the system in other ways, e.g. for text or image editing,
-or for internet browsing or e-mail writing, it might be safer to do this as an
-unprivileged user. Such a user is easily created with the 'adduser' command, or
-in KDE with 'kuser' (or using the 'luser.py' script in the larch
-'luser' package). If you have a writable boot medium, such changes can be
-'remembered' by saving the session when you shut the system down (the possibility
-will normally be offered automatically).
-
-
-Boot parameters
-
-As the larch build system is highly configurable, the available
-boot parameters can also vary, but by default 'swap' and 'c2r' are provided.
-'swap' indicates that an existing swap partition should be used (the default
-is not to use it). 'c2r' means 'copy to RAM', i.e. the system data is copied
-to main memory before the system is initialized. This allow the system to run
-very fast and frees up the boot device (e.g. the boot CD can be ejected and the
-drive used for another CD), but it does require a lot of memory (significantly
-more than the size of the boot medium), and the boot process is rather slow
-because so much data must be copied. Because of the high memory usage, I have
-arranged it so that 'c2r' also implies 'swap'. With A USB-stick as boot medium,
-the 'c2r' parameter should generally not really be needed, performance is normally
-pretty good and it doesn't occupy the CD-drive (if an extra boot CD is needed, on
-a machine that can't boot directly from USB, that can be removed after
-booting even without 'c2r').
-
-
-Configuration
-
-The supplied profiles are just intended as starting points for your own
-configurations, they are fairly primitive, in fact only a little more than a newly
-installed Arch sytem. If you are running a profile with X11, you may find that you
-need to configure it before it will run. Since Xorg version 7.3, it
-is often possible to run without an /etc/X11/xorg.conf, but
-it may be necessary to create and tweak the configuration file for your system.
-You can try 'X -configure' or 'xorgconfig' to create a starting point which you can
-then tweak. Start X with startx.
-
-
-The 'xmini' and 'xmaxi' profiles use a slightly more elaborate login approach on
-the first terminal, with a simple menu as well as automatic login. There is also
-a logout gui for xfce, which together with the login script can
-trigger session saving directly, bypassing the console prompt.
-
-
-If you are stuck with the console, there is still hope. It's not as pretty or
-newbie friendly as an X11 desktop, but still quite capable. I always like to have
-mc available, it's a real godsend for non-geeks (you should also install
-lynx so that HTML files can be displayed on the console - at a
-pinch you can also surf with it, but it is painful).
-
-
-If your console keyboard map is
-wrong, try running km (I stole this from the
-standard Arch install CD and modified it a bit to work in larch).
-It also modifies '/etc/rc.conf', so the change can be retained for subsequent
-runs by performing a 'session-save'.
-
-
-If you have a DHCP server on your network, you might well find that
-the network interface is configured automatically (assuming your rc.conf
-is configured appropriately). On my prototype, I could just fire up konqueror
-and the world was my oyster, as they say. If not, well I'm afraid it's
-not so easy. Until someone comes up with something better, you'll have
-to edit the appropriate configuration files (primarily '/etc/rc.conf')
-- see the Arch Linux documentation for details - and then do
-'/etc/rc.d/network start'. If you already have a running network
-interface but want to change it, you may need to stop it running first,
-using 'stop' instead of 'start', then make the changes, then start it.
-I don't know if 'restart' would work (it stops then starts the network)
-after a change to the configuration.
-
-
-Of course the exact details of what you can do depends on what
-software you installed, so I won't rabbit on endlessly about it here.
-Nearly all configuration details should be just the same as in a normal,
-hard-disk based installation.
-
-
-Installation to hard disk
-
-The larch hard-disk installer larchin may be used to install
-Arch Linux to hard disk (or similar). At the moment it is very fresh
-and rather minimal, probably rather buggy, but I hope it will improve over time.
-It is not intended as a complete solution for all aspects of Arch installation,
-but I have tried to concentrate on those areas that are unique to the installation
-process. In other words it does very little system configuration, because such
-requirements can also exist in an already installed system, so I think this should
-be covered by separate tools.
-larchin deals with partitioning and formatting of hard drives, placing
-Arch Linux (primarily a copy of the live system on which it is running)
-on the newly formatted partitions, and installation of the GRUB bootloader.
-It is so fresh that it hasn't yet got any documentation yet, but it's usage
-should be very straightforward - just run 'larchin.py', as root).
-
-
-As mentioned above the main approach to Arch installation covered by
-larchin is to copy the contents of the live system to a hard drive. Those
-(few) bits peculiar to the needs of a live system are removed and the result is a
-completely normal Arch Linux installation. I should perhaps mention
-the file 'larch0' in the '/.livesys' directory (copied there from the 'larch/copy'
-directory on the boot medium). This script is run at the end of the installation
-(if it exists) and allows custom installation actions to be performed.
-The possibility of doing a completely fresh installation using ftp to
-fetch the latest packages may be added at some point, but that is not yet certain.
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_sessionsave.html b/build_tools/clarch/larch/docs/html/larch_sessionsave.html
deleted file mode 100644
index edca50c..0000000
--- a/build_tools/clarch/larch/docs/html/larch_sessionsave.html
+++ /dev/null
@@ -1,162 +0,0 @@
-
-
-
-
-
- larch session saving
-
-
-
-
-
-
-
-
-
-larch – a do-it-yourself live Arch Linux CD
-
-
-
-
-Saving a session back to the boot device (or even somewhere else)
-
-An easy way to create a customized live-USB-stick is to start from an
-existing one, make whatever changes you like, and then save the result back to
-the USB-stick.
-
-
-Overlay archives, overlay.ovl and
-mods.sqf
-
-In larch the overlay file-system (in the
-compressed file 'overlay.ovl') can be rebuilt
-from the state of the live system when it shuts down.
-This is handled primarily by the script /opt/larch-live/session-save/saveovl, which is
-called from the customized shutdown function.
-If the medium is writable and contains a file 'larch/save', the user is offered the possibility of
-rewriting the overlay archive, thus saving the current state.
-
-
-The main overlay archive (overlay.ovl) is unpacked into memory
-at boot and repacked when saving the session at shutdown. When this archive grows
-too large it will reduce the amount of available memory, perhaps to an unacceptable extent.
-It will also lengthen boot and shutdown times. To counter this, it is possible to merge the
-overlay archive into the middle union layer in mods.sqf (which is
-normally not copied to memory), thus restoring the rapid load and save times
-for overlay.ovl, and maximizing the available memory. I call this process
-'overlay merging', and it is offered as a shutdown option.
-It takes longer to execute than a normal session save, but from larch version 5.2
-a new aufs option allows the merging to be done quicker than it was
-previously and without significant extra memory requirements. In this version
-a separate aufs union of the two overlay layers is mounted in which
-the whiteouts are visible. This union can then be squashed directly, without
-requiring the new, merged overlay to be rebuilt in memory. As it is a feature
-of aufs, overlay merging is no longer supported for unionfs
-(note that unionfs is at present not actively supported in larch
-anyway).
-
-
-Special places in /var
-
-It was considered undesirable to include some things in the '/var' directory
-in the session saves, primarily because of the space they occupy. Firstly,
-the standard pacman package cache, '/var/cache/pacman/pkg' - if you
-do want to save your cache, you should either handle this manually or set
-up another location using 'CacheDir' in /etc/pacman.conf'. Also the log files
-(in '/var/log') and '/var/tmp' (temporary files, like '/tmp') are not saved.
-
-
-Updating packages
-
-It should be possible to include package addition and removal in the list
-of customizations undertaken using this method, but there are some limitations. Apart from
-size considerations (the top level overlay is unpacked into memory at boot), there is also
-a limitation connected with the kernel. Essentially, the kernel and its modules may not
-be updated. If you do this, you may well make a mess of your system.
-In other words, be very careful with 'pacman -Su' - only upgrade selected packages.
-
-The reason for this is that the kernel is not contained within the
-squashed file-system, but is held separately on the boot medium, while its modules
-are contained in the squashed system and also in the initramfs. Updating these is not
-impossible (if booting from a writable medium), but pacman cannot do it and
-it is not straightforward (e.g. using a CD to boot to a USB-stick on a computer not
-supporting USB boot would additionally need a new CD). A complete rebuild of the live
-system might be a better approach. And using 'larchify' it should even be possible to
-perform such a rebuild from within the running live system.
-
-
-Activating and deactivating the session-saving feature
-
-As mentioned above, for this feature to be available, there must be a file with
-the name 'save' in the boot medium's 'larch' directory.
-
-
-Customizing the behaviour using scripts
-
-Some aspects of the session saving can be customized by writing scripts to
-override the default behaviour. These scripts are (in general) kept on the boot
-medium, in the 'larch' directory. As these are shell scripts and their use requires
-some knowledge of the inner workings of the larch live system, it will
-almost certainly be necessary to read the existing larch scripts where the
-custom scripts are 'sourced' if you want to
-write your own scripts to change the behaviour of the larch live system.
-
-
- - session-save
-
Used in /opt/larch-live/session-save/saveovl. This script can be
- used to customize the creation of the new overlay archive, e.g. by
- specifying a new location. The default is 'overlay.ovl' on the boot medium.
-
-
- - save-menu
-
Used in /opt/larch-live/session-save/saveovl. This script can be
- used to further customize the creation of the new overlay archive, e.g. by
- providing an alternative session save menu. Note that if the
- session-save script specified an alternative device path
- for saving the overlay, this script will be sought in the 'larch' directory
- on that path.
-
-
- - merge-adjust
-
Used in /opt/larch-live/session-save/merge_overlay. This script can be
- used to further customize aspects of the overlay merging process. Note that if the
- session-save script specified an alternative device path
- for saving the overlay, this script will be sought in the 'larch' directory
- on that path.
-
-
- - boot-init
-
In initramfs hook larch3. This script allows adjustment of
- the overlay handling during the boot process, e.g. getting them from another
- path.
- Note that the shell environment here is that of the initramfs and thus
- very limited.
-
-
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/docs/html/larch_ssh.html b/build_tools/clarch/larch/docs/html/larch_ssh.html
deleted file mode 100644
index f7db018..0000000
--- a/build_tools/clarch/larch/docs/html/larch_ssh.html
+++ /dev/null
@@ -1,205 +0,0 @@
-
-
-
-
-
- larch ssh access
-
-
-
-
-
-
-
-
-larch – a do-it-yourself live Arch Linux CD
-
-
-
-
-ssh access
-
-
-One feature I wanted in my live system was the ability to
-access and control it remotely via ssh. ssh is
-generally very useful, but here it also gives my installation CD a rare
-advantage over most others - using it I can install Arch Linux
-to a computer which has no keyboard or monitor. Insert the CD, boot up
-the computer (assuming it is configured to boot from CD), and log in
-via the network using another computer. Isn't Linux great!
-
-
-Well, it doesn't quite work out of the box, though it could be
-tweaked so that - in the right environment - it would. Firstly, there
-must be a network connection which gets set up automatically -
-the easiest is probably DHCP (so long as
-you can then find the address of the live system),
-but by tweaking rc.conf (via rcconfx
-in the profile or by using the session saving feature)
-a static address is also easy to set up.
-Secondly you must provide the live system with your public key, so
-that you are allowed access (using public key authentication), or else
-set a password for the larch root user (probably easiest using the
-session saving feature).
-
-
-id_rsa.pub & authorized_keys
-
-id_rsa.pub
-is a public key, and it can be used to allow the user (on the remote machine)
-whose key this is to ssh into the live system.
-If you leave passwordless logins disabled (the
-default), then so long as no root password is set,
-the only way in (to the root account) is via public key authentication.
-Of course, if you change the root password, anyone (who knows the
-password) can log in via ssh
-(if the sshd daemon is running).
-
-
-To generate this key for your user (assuming you don't already
-have one, in ~/.ssh):
-
-
-ssh-keygen -t rsa
-
-Use the default destination file and empty passphrase
-(normally you wouldn't do that,
-but I think it is appropriate in this case).
-
-
-In order to enable ssh to the root account on the live
-system, the contents of this file (a single text line) must be placed in
-the larch system's /root/.ssh/authorized_keys file.
-This file will probably not yet
-exist, so the 'id_rsa.pub' can be simply copied to it.
-If doing this before building the live-CD, copy the file to this
-position in the 'overlay' directory in the profile, being
-careful to get ownerships (root:root) and permissions (644) correct.
-To do this in a running larch system, copy the file to this location -
-session saving will then preserve it.
-
-
-If you don't need sshd on the live system, you can
-remove it from the daemons in rc.conf.
-
-
-/etc/hosts.allow
-
-
-This must be edited to allow ssh
-access to the live system:
-
-
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-
-If that is too radical for you, you might be able to restrict
-it somewhat - that depends on your exact circumstances. For example:
-
-
-
-# To allow ssh in from local net (example)
-sshd: 192.168.1.
-
-
-ssh host keys
-
-The files
-/etc/ssh/ssh_host_dsa_key
-/etc/ssh/ssh_host_dsa_key.pub,
-/etc/ssh/ssh_host_rsa_key,
-/etc/ssh/ssh_host_rsa_key.pub,
-/etc/ssh/ssh_host_key,
-and
-/etc/ssh/ssh_host_key.pub
-are normally (in a hard-disk based system) generated on the first run of
-/etc/rc.d/sshd, i.e. during the first boot after a new
-installation. This only needs to be done once. However in a live-CD system
-changes are generally lost when the system shuts down, so this would need
-to be done at every boot, which takes a while, so I prefer to pregenerate them.
-At present this is
-done during the first phase of the live-CD build (the Arch Linux
-installation phase). What this means is that all live-CDs generated from
-this base will have the same ssh host keys. If security is important to
-you, these should be regenerated, e.g. for the running larch system
-as follows:
-
-
-
-rm /etc/ssh/ssh_host_*
-/etc/rc.d/sshd restart
-
-
-ssh and X11
-
-
-If you have set up 'X11 Forwarding' (see below), you can run X11 applications on the
-live system from your remote system. This is very neat! Before xorg reached
-version 7 there were complications due to the location of its xauth
-program, but since that version this is at the ssh
-default position, /usr/bin/xauth, so all should now be well.
-
-
-
-Bear in mind that this will only work if you use the -Y option to ssh,
-or set up its configuration file properly.
-
-
-[
-
-If, for some reason you are not using Xorg7(+), you may need to set the xauth
-path in /etc/ssh/sshd_config
-and/or /etc/ssh/ssh_config (or set a symlink from /usr/bin/xauth to /usr/X11R6/bin/xauth):
-
-
-XAuthLocation /usr/X11R6/bin/xauth
-]
-
-/etc/ssh/sshd_config
-
-This file is changed to allow X applications to run on the
-live system but display on another:
-
-
-X11Forwarding yes
-
-
-This will only work if you use the -Y option to ssh
-on the system from which you log in, and on which
-you want to display the X windows (e.g. 'ssh -Y
-root@192.168.0.201'). Alternatively you can put the
-following in its etc/ssh/ssh_config:
-
-
-
-ForwardX11 yes
-ForwardX11Trusted yes
-
-
-
-
-
-
diff --git a/build_tools/clarch/larch/profile0/cd-root/README b/build_tools/clarch/larch/profile0/cd-root/README
deleted file mode 100644
index 325b31c..0000000
--- a/build_tools/clarch/larch/profile0/cd-root/README
+++ /dev/null
@@ -1,8 +0,0 @@
-If in "GRUB" mode, the contents of the "boot" directory will be copied
-to the "boot" directory on the CD.
-
-If in "isolinux" mode, the contents of the "isolinux" directory will be
-copied to the "isolinux" directory on the CD.
-
-In both cases these profile files may overwrite the default ones from
-"larch/cd-root".
diff --git a/build_tools/clarch/larch/profile0/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profile0/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index 0f45c6b..0000000
--- a/build_tools/clarch/larch/profile0/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 50
-
-MENU BACKGROUND bkgd.jpg
-
-MENU TITLE larch live CD from existing installation
-
-label linux
-MENU LABEL Default: no swap, no copy-to-ram
-kernel vmlinuz
-append initrd=larch.img
-# or with video mode for beyond kernel:
-#append initrd=larch.img video=vesafb:ywrap,mtrr,800x600@60
-
-label linux-c2r
-MENU LABEL larch copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL larch with swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
diff --git a/build_tools/clarch/larch/profile0/kernel b/build_tools/clarch/larch/profile0/kernel
deleted file mode 100644
index 51635f9..0000000
--- a/build_tools/clarch/larch/profile0/kernel
+++ /dev/null
@@ -1,2 +0,0 @@
-VMLINUZ=vmlinuz26
-KVERSION=$( uname -r )
diff --git a/build_tools/clarch/larch/profiles/MV-local/addedpacks b/build_tools/clarch/larch/profiles/MV-local/addedpacks
deleted file mode 100644
index a04a8eb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/addedpacks
+++ /dev/null
@@ -1,151 +0,0 @@
-# These are needed to build a live CD
-#linhes-live
-mythvantage-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-ntfsprogs
-parted
-#ddcxinfo-knoppix
-#hwd
-
-# generally useful tools which don't require X
-openssh
-dosfstools
-lynx
-#mc
-unzip
-zip
-
-lsof
-#cdrkit
-#dvd+rw-tools
-
-etcnet
-
-xorg
-xorg-xinit
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-#unichrome is busted and causes X to segfault
-#xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-#vga should not be installed, vesa can handle when other drivers fail
-#xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-
-
-
-
-#terminal
-openssh
-ntp
-runit
-runit-scripts-mv
-mysql
-
-mythtv-release-fixes
-mythtv-themes-release-fixes
-mediadirsetup
-lm_sensors
-MythVantage-mythmenu
-setserial
-avahi
-keylaunch
-mysql-python
-acpid
-
-
-tilda
-#opera
-ivtv-utils
-hd3000firmware
-oss
-alsa-utils
-
-make
-python-iplib
-#hdhgrab
-hdhomerun
-
-#intel-e1000
-perl-dbi
-perl-dbd-mysql
-lcdproc
-netkit-telnet
-nfs-utils
-jfsutils
-xfsprogs
-
-patch
-gdb
-sudo
-syslog-ng
-
-ttf-bitstream-vera
-xine-lib
-
-syth-lacquer-wide
-Midnight-wide
-Midnight-blue
-basic-blue
-basic-green
-basic-amber
-basic-purple
-basic-red
-
-
-MythVantage-system
-#live-installer
-MythVantage-config
-libstatgrab
-nmbscan
-smbclient
-
-
-
-enlightenment
-e16-myth-settings
-ttf-ms-fonts
-dbus-python
\ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/baseveto b/build_tools/clarch/larch/profiles/MV-local/baseveto
deleted file mode 100644
index 419aad4..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/baseveto
+++ /dev/null
@@ -1,7 +0,0 @@
-xfsprogs
-xfsdump
-jfsutils
-kernel26STB
-xf86-video-unichrome
-xf86-video-via
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/cache_packs b/build_tools/clarch/larch/profiles/MV-local/cache_packs
deleted file mode 100644
index 782f3b5..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/cache_packs
+++ /dev/null
@@ -1,39 +0,0 @@
-#comment
-xosd
-local-website
-webcalendar
-lighttpd
-mythdb-initial
-samba
-libmysqlclient
-mysql
-hobbitserver
-hobbit-client
-dnsmasq
-mysql-clients
-mythtv-status
-avahi
-dbus
-myth2ipod
-tightvnc
-phpmyadmin
-libgl-dri
-mythphone-release-fixes
-mytharchive-release-fixes
-mythbrowser-release-fixes
-mythnews-release-fixes
-mythgame-release-fixes
-mythflix-release-fixes
-mythweather-release-fixes
-mythcontrols-release-fixes
-mythgallery-release-fixes
-mythmovietime-release-fixes
-mythmusic-release-fixes
-mythsmolt-release-fixes
-mythvideo-release-fixes
-mythweb-release-fixes
-alsa-lib
-nvidia
-nvidia-utils
-nvidia-96xx
-nvidia-96xx-utils
diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index a4c7998..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-PROMPT 0
-TIMEOUT 40
-DEFAULT vesamenu.c32
-MENU BACKGROUND vbg.jpg
-MENU TITLE MythVantage Boot options
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 all
-
-
-LABEL MythVantage
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto
-
-LABEL MythVantage-NoX
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto NoX
-
-LABEL MythVantage-Vnc
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netdev=eth0
-
-LABEL MythVantage-dhcp
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto ip=dhcp netdev=eth0
-
-LABEL MythVantage-remote
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto ip=dhcp remote=MX-500-jams remoteport=ttyS0
-
-LABEL MythVantage-static-ip
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netmask=255.255.0.0 gateway=192.168.1.1 netdev=eth0 dns=192.168.1.1
-
-LABEL Boot_from_hardrive
- localboot 0xffff
-
-MENU ROWS 6
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index d9f3ebb..0000000
Binary files a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/MV-local/locale.gen b/build_tools/clarch/larch/profiles/MV-local/locale.gen
deleted file mode 100644
index a3276b1..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/locale.gen
+++ /dev/null
@@ -1,8 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-de_DE ISO-8859-1
-de_DE@euro ISO-8859-15
-de_DE.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf b/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf
deleted file mode 100644
index f26fdb1..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf
+++ /dev/null
@@ -1,54 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish. This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-#BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway. This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-# FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H ' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'modload' may be used in place of 'udev', but is not recommended
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-# This setup specifies all modules in the MODULES setting above.
-# No raid, lvm, or encrypted root is needed.
-# HOOKS="base"
-#
-# This setup will autodetect all modules for your system and should
-# work as a sane default
-# HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-# This setup will generate a 'full' image which supports most systems.
-# No autodetection is done.
-# HOOKS="base udev ide scsi sata usb filesystems"
-#
-# This setup assembles an ide raid array with an encrypted root FS.
-# Note: See 'mkinitcpio -H raid' for more information on raid devices.
-# HOOKS="base udev ide filesystems raid encrypt"
-#
-# This setup loads an LVM volume group on a usb device.
-# HOOKS="base udev usb filesystems lvm"
-HOOKS="base udev ide scsi sata usb larch1 larch2___aufs___ larch3"
diff --git a/build_tools/clarch/larch/profiles/MV-local/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/pacman.conf
deleted file mode 100755
index 3739bbc..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/pacman.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[mv-core]
-Server = http://localmirror/repo/i686/mv-core
-
-[core-testing]
-#Server = file:///data/local/pkg_repo/i686/core-testing
-Server = http://localmirror/repo/i686/core-testing
-
-[extra-testing]
-#Server = file:///data/local/pkg_repo/i686/core-testing
-Server = http://localmirror/repo/i686/extra-testing
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/MV-local/pkglist b/build_tools/clarch/larch/profiles/MV-local/pkglist
deleted file mode 100644
index 91351bc..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/pkglist
+++ /dev/null
@@ -1,366 +0,0 @@
-Midnight-blue 1-22
-Midnight-wide 1-22
-STB-mythmenu 1.0-38
-STB-system 3.0-159
-acl 2.2.47-1
-acpid 1.0.6-3
-alsa-lib 1.0.16-1
-atk 1.22.0-1
-attr 2.4.41-1
-audiofile 0.2.6-3
-avahi 0.6.22-1
-bash 3.2.033-2
-basic-amber 1-5
-basic-blue 1-6
-basic-green 1-5
-basic-purple 1-5
-basic-red 1-5
-bc 1.06-4
-bigreqsproto 1.0.2-1
-binutils 2.18-8
-bzip2 1.0.5-2
-ca-certificates 20080514-3
-cairo 1.6.4-1
-compositeproto 0.4-1
-confuse 2.5-1
-coreutils 6.12-1
-cpio 2.9-3
-cracklib 2.8.10-5
-cryptsetup 1.0.6-1
-curl 7.18.2-1
-damageproto 1.1.0-1
-dash 0.5.4-4
-db 4.6.21-2
-dbus 1.2.1-1
-dbus-glib 0.76-1
-dcron 3.2-3
-ddcxinfo-arch 0.8-1
-device-mapper 1.02.24-1
-dhcpcd 3.2.1-1
-dialog 1.1_20080316-3
-diffutils 2.8.1-5
-dmapi 2.2.8-3
-dmidecode 2.9-2
-dmxproto 2.2.2-1
-dnsutils 9.4.2-1
-e16-myth-settings 1.0-38
-e2fsprogs 1.40.8-1
-ed 0.9-1
-eject 2.1.5-3
-enlightenment 0.16.8.9-2
-esd 0.2.38-3
-etcnet 0.7.15-19
-ethtool 6-1
-evilwm 1.0.0-1.1
-exo 0.3.4-1
-expat 2.0.1-1
-expect 5.44.1.4-1
-file 4.24-1
-filesystem 2008.06-2
-findutils 4.4.0-1
-fixesproto 4.0-2
-flac 1.2.1-1
-fontcacheproto 0.1.2-1
-fontconfig 2.5.0-1
-fontsproto 2.0.2-1
-freetype2 2.3.6-1
-func 0.13-15
-gawk 3.1.6-2
-gcc 4.3.1-1
-gcc-libs 4.3.1-1
-gdb 6.8-1
-gdbm 1.8.3-5
-gdk-pixbuf 0.22.0-4
-gen-init-cpio 2.6.17-3
-gettext 0.17-1
-ghosd 0.0.1-18
-glib 1.2.10-7
-glib2 2.16.4-1
-glibc 2.8-2
-glproto 1.4.9-1
-gmp 4.2.2-2
-grep 2.5.3-3
-groff 1.19.2-4
-grub 0.97-12
-gtk 1.2.10-8
-gtk2 2.12.10-1
-guile 1.8.4-2
-gzip 1.3.12-4
-hal 0.5.11-1
-hal-info 0.20080508-1
-hd3000firmware 0.1-1
-hdhgrab 1-1
-hdhomerun 20070726-1
-hdparm 8.6-1
-heimdal 1.0.1-2
-hwd 5.3.4-1
-hwdetect 0.9-1
-iguanaIR 0.95-3
-imlib2 1.4.1-1
-initscripts 2008.05-1
-inputproto 1.4.3-1
-intel-dri 7.0.3-1
-intel-e1000 7.6.15.4-2
-iproute 2.6.24_rc7-1
-iptables 1.4.0-2
-iputils 20070202-4
-ivtv-utils 1.0.3-1
-jfsutils 1.1.12-2
-kbd 1.14.1.20080309-2
-kbproto 1.0.3-1
-kernel-headers 2.6.25.6-1
-kernel26STB 2.6.24-39
-keylaunch 1.3.3-10
-klibc 1.5-5
-klibc-extras 2.4-1
-klibc-kbd 1.15.20080312-5
-klibc-module-init-tools 3.2.2-3
-klibc-udev 116-3
-lame 3.98-1
-lcdproc 20080326-7
-less 418-1
-libarchive 2.5.5-1
-libavc1394 0.5.3-1
-libcap 1.10-2
-libdaemon 0.12-1
-libdatrie 0.1.2-1
-libdc1394 2.0.1-1
-libdmx 1.0.2-1
-libdownload 1.3-1
-libdrm 2.3.0-1
-libfontenc 1.0.4-1
-libgcrypt 1.4.1-1
-libglade 2.6.2-1
-libgpg-error 1.6-1
-libice 1.0.4-1
-libid3tag 0.15.1b-2
-libiec61883 1.1.0-1
-libjpeg 6b-4
-liblbxutil 1.0.1-1
-libldap 2.3.40-1
-libmng 1.0.10-1
-libmpeg2 0.4.1-1
-libmysqlclient 5.0.60-1
-libogg 1.1.3-1
-libpcap 0.9.8-2
-libpng 1.2.29-1
-libraw1394 1.3.0-1
-libsasl 2.1.22-5
-libsm 1.0.3-1
-libsmbios 2.0.2-1
-libstatgrab 0.14-1
-libthai 0.1.9-1
-libtheora 1.0beta1-1
-libtiff 3.8.2-3
-libtool 2.2.4-1
-libungif 4.1.4-1
-libusb 0.1.12-3
-libvorbis 1.2.0-1
-libx11 1.1.4-2
-libx86 0.99-1
-libxau 1.0.3-1
-libxaw 1.0.4-1
-libxcb 1.1-1
-libxcomposite 0.4.0-1
-libxcursor 1.1.9-1
-libxdamage 1.1.1-1
-libxdmcp 1.0.2-1
-libxext 1.0.4-1
-libxfce4util 4.4.2-1
-libxfixes 4.0.3-1
-libxfont 1.3.2-1
-libxfontcache 1.0.4-1
-libxft 2.1.12-1
-libxi 1.1.3-1
-libxinerama 1.0.3-1
-libxkbfile 1.0.5-1
-libxkbui 1.0.2-1
-libxml2 2.6.32-1
-libxmu 1.0.4-1
-libxp 1.0.0-1
-libxpm 3.5.7-1
-libxrandr 1.2.2-1
-libxrender 0.9.4-1
-libxt 1.0.5-1
-libxtrap 1.0.0-1
-libxtst 1.0.3-1
-libxv 1.0.4-1
-libxvmc 1.0.4-1
-libxxf86dga 1.0.2-1
-libxxf86misc 1.0.1-1
-libxxf86vm 1.0.1-1
-licenses 2.4-1
-lirc 0.8.3-17
-lirc-utils 0.8.3-13
-live-installer 3.2-52
-lm_sensors 3.0.2-1
-logrotate 3.7.5-1
-lvm2 2.02.36-1
-lzo2 2.02-3
-mailx 8.1.1-5
-man 1.6f-2
-man-pages 3.00-1
-mcpp 2.6.4-2
-mdadm 2.6.4-1
-mediadirsetup 1-14
-mesa 7.0.3-3
-mkinitcpio 0.5.19-1
-mlocate 0.20-2
-module-init-tools 3.2.2-6
-mpfr 2.3.1-1
-mysql 5.0.60-200
-mysql-clients 5.0.60-1
-mysql-python 1.2.2-1
-mythtv-release-fixes 17773-8
-mythtv-themes-release-fixes 15931-4
-nano 2.0.7-1
-ncid 0.71-1
-ncurses 5.6-6
-net-tools 1.60-13
-netkit-telnet 0.17-7
-nfs-utils 1.1.0-2
-nfsidmap 0.20-2
-nmbscan 1.2.5-1
-ntp 4.2.4p4-1
-nvidia-STB 173.08-5
-nvidia-utils 173.08-4
-openssh 5.0p1-1
-openssl 0.9.8h-3
-opera 9.51-1
-oss 4.0_1016-11
-pacman 3.2.0-2008
-pam 1.0.1-1
-pango 1.18.4-3
-patch 2.5.9-1
-pciutils 2.2.8-3
-pcmciautils 014-4
-pcre 7.7-1
-perl 5.10.0-3
-perl-date-manip 5.44-1
-perl-dbd-mysql 3.0008-11000
-perl-dbi 1.601-1
-perl-uri 1.35-3
-perl-xml-parser 2.34-2
-pixman 0.10.0-1
-pm-utils 1.1.2.2-1
-popt 1.10.6-3
-portmap 6.0-2
-ppp 2.4.4-6
-printproto 1.0.4-1
-procinfo 19-2
-procps 3.2.7-1000
-psmisc 22.6-1
-pyopenssl 0.6-3
-python 2.5.2-2
-python-iplib 1.0-1
-qt3 3.3.8-7
-randrproto 1.2.1-1
-readline 5.2-7
-recordproto 1.13.2-1
-reiserfsprogs 3.6.20-3
-renderproto 0.9.3-1
-rp-pppoe 3.8-3
-run-parts 2.28.6-2
-runit 1.8.0-32
-sdl 1.2.13-1
-sdparm 1.02-2
-sed 4.1.5-3
-setserial 2.17-2
-shadow 4.0.18.2-2
-smbclient 3.0.30-1
-sudo 1.6.9p17-1
-swig 1.3.31-1
-sysfsutils 2.1.0-4
-syslog-ng 2.0.9-4
-sysvinit 2.86-4
-syth-lacquer-wide 4-1
-tar 1.20-2
-tcl 8.5.3-1
-tcp_wrappers 7.6-8
-terminal 0.2.8-2
-tilda 0.9.6-8
-trapproto 3.4.3-1
-ttf-bitstream-vera 1.10-5
-tzdata 2008c-1
-udev 119-1
-unclutter 8-1
-unichrome-dri 7.0.3-1
-usbutils 0.73-5
-util-linux-ng 2.13.0.1-2
-vbetool 1.0-2
-vi 7.1.330-1
-videoproto 2.2.2-1
-vmwaretools 6.0.0-6
-vte 0.16.14-1
-wavpack 4.50.0-1
-wget 1.11.3-1
-which 2.19-2
-wireless_tools 29-2
-wol 0.7.1-2
-wpa_supplicant 0.5.10-1
-xbitmaps 1.0.1-1
-xcb-proto 1.1-1
-xcursor-themes 1.0.1-1
-xextproto 7.0.3-1
-xf86-input-evdev 2.0.1-1
-xf86-input-joystick 1.3.1-1
-xf86-input-keyboard 1.3.1-1
-xf86-input-mouse 1.2.3-1
-xf86-video-apm 1.2.0-1
-xf86-video-ark 0.7.0-1
-xf86-video-ati 6.8.0-4
-xf86-video-chips 1.2.0-1
-xf86-video-cirrus 1.2.1-1
-xf86-video-dummy 0.2.0-4
-xf86-video-fbdev 0.3.1-4
-xf86-video-glint 1.1.1-5
-xf86-video-i128 1.2.1-4
-xf86-video-i740 1.1.0-4
-xf86-video-imstt 1.1.0-4
-xf86-video-intel 2.3.2-1
-xf86-video-mga 1.4.8-3
-xf86-video-neomagic 1.2.1-1
-xf86-video-nv 2.1.9-1
-xf86-video-rendition 4.1.3-4
-xf86-video-s3 0.5.0-4
-xf86-video-s3virge 1.10.1-1
-xf86-video-savage 2.2.1-1
-xf86-video-siliconmotion 1.5.1-4
-xf86-video-sis 0.9.4-3
-xf86-video-sisusb 0.8.1-4
-xf86-video-tdfx 1.4.0-1
-xf86-video-trident 1.3.0-2
-xf86-video-tseng 1.1.1-4
-xf86-video-v4l 0.1.1-4
-xf86-video-vesa 1.3.0-5
-xf86-video-vga 4.1.0-4
-xf86-video-via 0.2.2-5
-xf86-video-vmware 10.16.2-1
-xf86-video-voodoo 1.1.1-4
-xf86dgaproto 2.0.3-1
-xf86miscproto 0.9.2-1
-xf86vidmodeproto 2.2.2-1
-xfsprogs 2.9.7-1
-xine-lib 1.1.12-1
-xineramaproto 1.1.2-1
-xkeyboard-config 1.2-1
-xorg-apps 1.0.3-3
-xorg-font-utils 1.0.3-3
-xorg-fonts-100dpi 1.0.1-1
-xorg-fonts-75dpi 1.0.1-2
-xorg-fonts-alias 1.0.1-1
-xorg-fonts-encodings 1.0.2-2
-xorg-fonts-misc 1.0.0-3
-xorg-res-utils 1.0.3-2
-xorg-server 1.4.2-10
-xorg-server-utils 7.3-1
-xorg-twm 1.0.1-2
-xorg-utils 7.3-1
-xorg-xauth 1.0.2-1
-xorg-xinit 1.1.0-1
-xorg-xkb-utils 1.0.2-2
-xosd 2.2.14-1
-xproto 7.0.13-1
-xterm 235-1
-xtrans 1.2-1
-zlib 1.2.3-4
diff --git a/build_tools/clarch/larch/profiles/MV-local/post-process.sh b/build_tools/clarch/larch/profiles/MV-local/post-process.sh
deleted file mode 100755
index 131b907..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.tweak
-chroot $INSTDIR .tweak/tweak.sh
-rm -rf $INSTDIR/.tweak
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab b/build_tools/clarch/larch/profiles/MV-local/post_process/fstab
deleted file mode 100755
index 8ea8305..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# /etc/fstab: static file system information
-#
-#
-none /dev/pts devpts defaults 0 0
-none /dev/shm tmpfs defaults 0 0
-
-/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
-/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
-/dev/fd0 /mnt/fl vfat user,noauto 0 0
-
-/dev/hda1 / reiserfs defaults 0 1
-/dev/hda2 swap swap defaults 0 0
-/dev/hda3 /data reiserfs defaults 0 0
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch
deleted file mode 100644
index eb9034c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- functions.orig 2008-07-06 10:16:37.000000000 -0500
-+++ functions 2008-07-06 19:42:07.000000000 -0500
-@@ -61,8 +61,8 @@
-
- # prefixes:
-
--PREFIX_REG="::"
--PREFIX_HL=" >"
-+PREFIX_REG=" :"
-+PREFIX_HL=" :"
-
- # functions:
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst
deleted file mode 100755
index 1bd45a6..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst
+++ /dev/null
@@ -1,55 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title MythVantage
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title STB-bootsplash
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title STB-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
-initrd /boot/kernel26.img
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf
deleted file mode 100755
index e4495ed..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[mv-core-testing]
-Server = http://mvbuild/repo/mv-core-testing/
-
-[mv-extra-testing]
-Server = http://mvbuild/repo/mv-extra-testing/
-
-[svc_pkg]
-Include = /etc/pacman.d/svc_pkg
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf
deleted file mode 100755
index 03d8e5c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="no"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="soundcore"
-else
- if [ x$Audiotype = x ]
- then
- ALSABLACKLIST="soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST=($ALSABLACKLIST)
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=()
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus hal avahi-daemon)
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local
deleted file mode 100755
index 0552860..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-#install initial database
-pacman -S --noconfirm /data/var/cache/pacman/pkg/mythdb-initial* 2>/dev/null
-
-init_network
-/etc/rc.d/alsa-utils start 0
-init_remote
-random_theme
-
-echo $CMDLINE | grep -q NoX
-if [ $? = 0 ]
-then
- echo "No auto X option found"
- /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch
deleted file mode 100644
index 7648f7f..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- rc.sysinit.orig 2009-02-22 22:45:07.000000000 +0000
-+++ rc.sysinit 2009-02-22 22:45:46.000000000 +0000
-@@ -7,9 +7,8 @@
- . /etc/rc.d/functions
-
- echo " "
--printhl "LinHES"
--printhl "The Linux Home Entertainment System"
--printhl "${C_H2}http://www.linhes.org"
-+printhl "MythVantage"
-+printhl "http://www.MythVantage.com"
- printhl "Distributed under the GNU General Public License (GPL)"
- printsep
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/root b/build_tools/clarch/larch/profiles/MV-local/post_process/root
deleted file mode 100644
index e6542a2..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/root
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# DO NOT EDIT THIS FILE MANUALLY!! USE crontab -e INSTEAD.
-#
-
-#
-
-
-01 * * * * /usr/sbin/run-cron /etc/cron.hourly
-*/10 * * * * /usr/sbin/run-cron /etc/cron.tenminutes
-02 00 * * * /usr/sbin/run-cron /etc/cron.daily
-22 00 * * 0 /usr/sbin/run-cron /etc/cron.weekly
-42 00 1 * * /usr/sbin/run-cron /etc/cron.monthly
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty b/build_tools/clarch/larch/profiles/MV-local/post_process/securetty
deleted file mode 100755
index 68e8a50..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# /etc/securetty
-#
-
-console
-vc/1
-vc/2
-vc/3
-vc/4
-vc/5
-vc/6
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh b/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh
deleted file mode 100755
index 9fa0396..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/bash
-
-cd /
-#tar -zxvf .tweak/linux-kernel-2.6.16-i486-1.tgz
-#chmod 755 install/doinst.sh
-#install/doinst.sh
-cd .tweak
-#cd /boot
-#ln -s vmlinuz26STB vmlinuz
-#cd -
-#cp fstab /etc/fstab.install
-#cp pacman.conf /etc
-cp menu.lst /boot/grub/menu.lst
-
-cp -f hosts.allow /etc/hosts.allow
-cp -f securetty /etc/securetty
-cp -f rc.conf /etc/rc.conf
-#cp -f rc.local /etc/rc.local
-#cp -f locale.gen /etc/locale.gen
-
-cp -f rc.shutdown /etc/rc.shutdown
-#cp -f inittab /etc/inittab
-
-#cp -f fbsplash-darch-1024x768 /boot/fbsplash-darch-1024x768
-
-
-
-#cp -rf .tilda /data/home/mythtv/.tilda
-ln -s /etc/keylaunchrc /root/.keylaunchrc
-mkdir -p /etc/cron.tenminutes
-cp -f root /var/spool/cron/root
-chmod 0440 /etc/sudoers
-#echo "mvi" > /etc/hostname
-#echo /usr/local/lib >> /etc/ld.so.conf
-#/sbin/ldconfig
-#/usr/sbin/locale-gen
-
-chmod 777 /tmp
-mkdir -p /data/home/mythtv/.mythtv
-ln -s /etc/lircrc /data/home/mythtv/.mythtv/lircrc
-ln -s /etc/lircrc /data/home/mythtv/.lircrc
-cp -f /etc/skel/.bashrc /data/home/mythtv/
-cp -f /etc/skel/.bash_profile /data/home/mythtv/
-cp -f /etc/skel/.bashrc /root/
-cp -f /etc/skel/.bash_profile /root/
-mkdir -p /data/home/mythtv/templates
-chown -R mythtv /data/media
-chown -R mythtv /data/home/mythtv
-ln -s /usr/sbin/chroot /usr/bin/chroot
-ln -s /bin/lsmod /sbin/lsmod
-/sbin/add_service.sh netfs
-/sbin/add_service.sh oss
-/sbin/add_service.sh syslog-ng
-/sbin/remove_service.sh alsa-utils
-/usr/bin/chage -d 01-01-2000 nobody
-/usr/bin/chage -E 01-01-3000 nobody
-cp /etc/pam.d/chage /etc/pam.d/chsh
-chsh -s /bin/bash nobody
-
-
-cd /etc/rc.d
-echo "patching functions"
-patch -p0 & /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble
-# Modified for Debian by alvar Bray
-# Modified for PPP Server setup by Christoph Lameter
-# Modified for ArchLinux by Manolis Tzanidakis
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd
-# will ask the peer to send packets of no more than bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to , a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to . Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu
-
-# Set the name of the local system for authentication purposes to .
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to .)
-#name
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to .
-#remotename
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to seconds
-# (default 3).
-#lcp-restart
-
-# Set the maximum number of LCP terminate-request transmissions to
-# (default 3).
-#lcp-max-terminate
-
-# Set the maximum number of LCP configure-request transmissions to
-# (default 10).
-#lcp-max-configure
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#lcp-max-failure
-
-# Set the IPCP restart interval (retransmission timeout) to
-# seconds (default 3).
-#ipcp-restart
-
-# Set the maximum number of IPCP terminate-request transmissions to
-# (default 3).
-#ipcp-max-terminate
-
-# Set the maximum number of IPCP configure-request transmissions to
-# (default 10).
-#ipcp-max-configure
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#ipcp-max-failure
-
-# Set the PAP restart interval (retransmission timeout) to seconds
-# (default 3).
-#pap-restart
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# (default 10).
-#pap-max-authreq
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to seconds (0 means no limit).
-#pap-timeout
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to seconds (default 3).
-#chap-restart
-
-# Set the maximum number of CHAP challenge transmissions to
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every
-# seconds.
-#chap-interval
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ------
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local
deleted file mode 100755
index c1b0154..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-#install initial database
-pacman -S --noconfirm mythdb-initial 2>/dev/null
-
-init_network
-/etc/rc.d/alsa-utils start 0
-init_remote
-random_theme
-
-echo $CMDLINE | grep -q NoX
-if [ $? = 0 ]
-then
- echo "No auto X option found"
- /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc
deleted file mode 100644
index 3e5c29c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc
+++ /dev/null
@@ -1,2 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/addedpacks b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/addedpacks
deleted file mode 100644
index 6668d64..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/addedpacks
+++ /dev/null
@@ -1,170 +0,0 @@
-# These are needed to build a live CD
-linhes-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-#ntfsprogs
-#parted
-
-#ddcxinfo-knoppix
-#hwd
-
-sudo
-
-lsof
-cdrkit
-dvd+rw-tools
-
-# Needed by the installer
-#python
-
-#base-devel
-#larch
-
-# generally useful tools which don't require X
-#mtools is required by syslinux
-openssh
-dosfstools
-alsa-lib
-alsa-oss
-alsa-utils
-cdparanoia
-cdrdao
-
-# Xorg packages
-xorg-server
-xorg-xkb-utils
-xorg-xauth
-xorg-server-utils
-xorg-xinit
-xorg-input-drivers
-xterm
-xorg-fonts-100dpi
-xorg-fonts-75dpi
-xorg-res-utils
-
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-# X apps
-#luser
-#localed
-
-#xkmap
-
-#gparted
-#larchin
-
-#mythtv
-mythtv
-mytharchive
-mythbrowser
-mythcontrols
-mythflix
-mythgallery
-mythgame
-mythmusic
-mythphone
-myththemes
-mythweather
-mythweb
-mythvideo
-nuvexport
-lirc
-lirc-utils
-mysql
-xmltv
-esd
-
-#Window Manager
-fluxbox
-feh
-
-#Other
-dbus
-hal
-fftw2
-libcdaudio
-iptables
-pkgconfig
-taglib
-
-#MythVantage Installer deps
-bc
-mysql-python
-expect
-curl
-dnsutils
-
-#Wireless
-b43-fwcutter
-ipw2100-fw
-ipw2200-fw
-ipw3945
-ipw3945-ucode
-ipw3945d
-iwlwifi-3945-ucode
-iwlwifi-4965-ucode
-madwifi
-madwifi-utils
-ndiswrapper
-ndiswrapper-utils
-netcfg
-rt2500
-rt2x00-rt61-fw
-rt2x00-rt71w-fw
-tiacx
-tiacx-firmware
-wireless_tools
-wlan-ng26
-wlan-ng26-utils
-zd1211-firmware
-
-#----
-live-installer
-etcnet
-runit
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cache_packs b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cache_packs
deleted file mode 100644
index b95e6f4..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cache_packs
+++ /dev/null
@@ -1 +0,0 @@
-mythdb-initial
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index 26a365a..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,49 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 50
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-label linux
-MENU LABEL LinHES with Splashy (default).
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-nosplash
-MENU LABEL LinHES without splash screen.
-kernel vmlinuz
-append initrd=larch.img
-
-label linux-splash
-MENU LABEL LinHES with splash screen.
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-i810
-MENU LABEL with Intel i810 driver (DRI disabled)
-kernel vmlinuz
-append initrd=larch.img i810
-
-label linux-nox
-MENU LABEL Boot to console (without X windowing)
-kernel vmlinuz
-append initrd=larch.img 3
-
-label linux-c2r
-MENU LABEL LinHES: copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL LinHES: Use swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index 43fbdd2..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/isolinux/vbg.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/actions.rc
deleted file mode 100644
index dd95b26..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/actions.rc
+++ /dev/null
@@ -1,3 +0,0 @@
-type=0
-orientation=1
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/autologin
deleted file mode 100644
index 93ca142..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/autologin
+++ /dev/null
@@ -1 +0,0 @@
-root
\ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/larch0
deleted file mode 100644
index c80b7c2..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/cd-root/larch/copy/larch0
+++ /dev/null
@@ -1,63 +0,0 @@
-# This is a script 'sourced' from the installation script larch-tidy.
-# Its purpose is to remove custom live-only stuff from a just-installed
-# system.
-# ${INSTALL} is the path to the installed system root directory.
-
-rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
-
-if [ -f ${INSTALL}/etc/rc.local.orig ]; then
- mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
-fi
-if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
- mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
-fi
-
-# slim is currently started in inittab
-#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf
-
-# Copy xorg.conf.i810 to target xorg.conf if necessary
-if ! [ -f /etc/X11/xorg.conf ]; then
- if grep i810 /proc/cmdline &>/dev/null; then
- cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf
- fi
-fi
-
-#***************************************************#
-# Replace uses of larchquit in xfce panels and menu.#
-#***************************************************#
-### Unfortunately this isn't very simple. If anyone has a better way of
-### providing different Quit actions in the live version and the version
-### installed to disk from it, please let me know!
-### Maybe it would be better just to provide a special live quit desktop
-### icon which can be removed on installation, like the installation icon.
-
-defaultquit=''
-
-replacequit ()
-{
- for f in ${INSTALL}$1/.config/xfce4/panel/*; do
- if grep "^Exec=larchquit" ${f}; then
- n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" )
- cp /.livesys/actions.rc \
- ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc
- rm ${f}
-
- sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \
- ${INSTALL}$1/.config/xfce4/panel/panels.xml
- fi
- done
-
- if [ -f ${INSTALL}$1/.bash_profile ]; then
- sed -i "s||${defaultquit}|" \
- ${INSTALL}$1/.config/xfce4/desktop/menu.xml
-
- cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session
- cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile
- fi
-}
-
-for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \
- /root /etc/skel; do
- replacequit ${hd} &>/dev/null
-done
-#***************************************************#
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/create_overlay.sh b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/create_overlay.sh
deleted file mode 100755
index 6a4fdee..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/create_overlay.sh
+++ /dev/null
@@ -1 +0,0 @@
-../../run/xpack -r overlay overlay.xpk
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/locale.gen b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/locale.gen
deleted file mode 100644
index 760ec23..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/locale.gen
+++ /dev/null
@@ -1,5 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 5a2b8d6..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {sudo /usr/MythVantage/bin/mythvantage}
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.xinitrc
deleted file mode 100755
index d988c98..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/overlay/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-. /etc/profile
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-# exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/pacman.conf b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/pacman.conf
deleted file mode 100755
index e33684f..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/pacman.conf
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[core-testing]
-Server = http://knoppmyth.net/repo/i586/core
-
-[extra-testing]
-Server = http://knoppmyth.net/repo/i586/extra
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post-process.sh b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post-process.sh
deleted file mode 100755
index 131b907..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.tweak
-chroot $INSTDIR .tweak/tweak.sh
-rm -rf $INSTDIR/.tweak
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 52db7fe..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {mythfrontend}
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/init
deleted file mode 100644
index aa4040a..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/init
+++ /dev/null
@@ -1,35 +0,0 @@
-session.screen0.slit.placement: BottomRight
-session.screen0.slit.direction: Vertical
-session.screen0.slit.onTop: False
-session.screen0.slit.autoHide: True
-session.screen0.tab.placement: Top
-session.screen0.toolbar.onTop: False
-session.screen0.toolbar.visible: False
-session.screen0.toolbar.autoHide: False
-session.screen0.toolbar.placement: BottomCenter
-session.screen0.toolbar.widthPercent: 66
-session.screen0.workspaceNames: one,two,three,four
-session.screen0.strftimeFormat: %k:%M
-session.screen0.focusNewWindows: True
-session.screen0.focusModel: ClickToFocus
-session.screen0.fullMaximization: False
-session.screen0.edgeSnapThreshold: 0
-session.screen0.rowPlacementDirection: LeftToRight
-session.screen0.workspaces: 4
-session.screen0.focusLastWindow: True
-session.screen0.colPlacementDirection: TopToBottom
-session.screen0.windowPlacement: RowSmartPlacement
-session.screen0.tab.width: 64
-session.screen0.tab.height: 16
-session.screen0.showwindowposition: true
-session.opaqueMove: False
-session.autoRaiseDelay: 250
-session.menuFile: ~/.fluxbox/menu
-session.cacheLife: 5
-session.styleFile: /usr/share/fluxbox/styles/bora_black
-session.keyFile: ~/.fluxbox/keys
-session.colorsPerChannel: 4
-session.doubleClickInterval: 250
-session.cacheMax: 200
-session.imageDither: True
-session.configVersion: 1
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menu
deleted file mode 100644
index 858090e..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menu
+++ /dev/null
@@ -1,81 +0,0 @@
-# Generated by fluxbox-generate_menu
-#
-# If you read this it means you want to edit this file manually, so here
-# are some useful tips:
-#
-# - You can add your own menu-entries to ~/.fluxbox/usermenu
-#
-# - If you miss apps please let me know and I will add them for the next
-# release.
-#
-# - The -r option prevents removing of empty menu entries and lines which
-# makes things much more readable.
-#
-# - To prevent any other app from overwriting your menu
-# you can change the menu name in .fluxbox/init to:
-# session.menuFile: /home/mythtv/.fluxbox/my-menu
-[begin] (Fluxbox)
-[encoding] {UTF-8}
- [exec] (xterm) {xterm}
- [exec] () {} execname is NULL; cannot lookup
- [exec] (Run) {fbrun }
-[submenu] (Terminals)
- [exec] (xterm) {xterm}
-[end]
-[submenu] (Editors)
- [exec] (xedit) {xedit}
- [exec] (nano) {xterm -e nano}
- [exec] (vi) {xterm -e vi}
-[end]
-[submenu] (Multimedia)
-[submenu] (Audio)
- [exec] (alsamixer) {xterm -e alsamixer}
-[end]
-[submenu] (Video)
- [exec] (gmplayer) {gmplayer}
-[end]
-[submenu] (X-utils)
- [exec] (xfontsel) {xfontsel}
- [exec] (xman) {xman}
- [exec] (xload) {xload}
- [exec] (xbiff) {xbiff}
- [exec] (xclock) {xclock}
- [exec] (xmag) {xmag}
- [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults}
-[end]
-[end]
-[submenu] (Office)
- [exec] (xclock) {xclock}
- [exec] (xcalc) {xcalc}
-[end]
-[submenu] (Games)
- [exec] (xeyes) {xeyes}
-[end]
-[submenu] (System Tools)
- [exec] (top) {xterm -e top}
-[end]
-[submenu] (fluxbox menu)
- [config] (Configure)
-[submenu] (System Styles) {Choose a style...}
- [stylesdir] (/usr/share/fluxbox/styles)
-[end]
-[submenu] (User Styles) {Choose a style...}
- [stylesdir] (~/.fluxbox/styles)
-[end]
- [workspaces] (Workspace List)
-[submenu] (Tools)
- [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center}
- [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg}
- [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png}
- [exec] (Run) {fbrun }
- [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu }
-[end]
- [commanddialog] (Fluxbox Command)
- [reconfig] (Reload config)
- [restart] (Restart)
- [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center}
- [separator]
- [exit] (Exit)
-[end]
-[endencoding]
-[end]
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
deleted file mode 100644
index ef5b398..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is read by fluxbox-generate_menu. If you don't like a
-# default you can change it here. Don't forget to remove the # in front
-# of the line.
-
-# Your favourite terminal. Put the command in quotes if you want to use
-# options. Put a backslash in before odd chars
-# MY_TERM='Eterm --tint \#123456'
-# MY_TERM='aterm -tint $(random_color)'
-
-# Your favourite browser. You can also specify options.
-# MY_BROWSER=mozilla
-
-# Name of the outputfile
-# MENUFILENAME=/home/mythtv/.fluxbox/menu
-
-# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
-
-# standard url for console-browsers
-# HOMEPAGE=fluxbox.org
-
-# location with your own menu-entries
-# USERMENU=~/.fluxbox/usermenu
-
-# Put the launcher you would like to use here
-# LAUNCHER=fbrun
-# LAUNCHER=fbgm
-
-# Options for fbrun
-# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
-
-# --- PREFIX'es
-# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
-# your prefix is: /usr
-
-# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
-# there should be no need to specify them.
-#
-# PREFIX=/usr
-# GNOME_PREFIX=/opt/gnome
-# KDE_PREFIX=/opt/kde
-
-
-# Sepparate the list of background-dirs with semicolumns ':'
-# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
-
-
-# --- Boolean variables.
-# Setting a variable to no'' won't help. Comment them out if you don't
-# want them. Setting are overruled by the command-line options.
-
-# Include all backgrounds in your backgrounds-directory
-# BACKGROUNDMENUITEM=yes
-
-# Include kde-menus
-# KDEMENU=yes
-
-# Include gnome-menus
-# GNOMEMENU=yes
-
-# enable sudo commands
-# DOSUDO=yes
-
-# Don't cleanup the menu
-# REMOVE=no
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
deleted file mode 100644
index 83da80c..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xinitrc
deleted file mode 100755
index 911e76e..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/home/mythtv/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/menu.lst b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/menu.lst
deleted file mode 100755
index ce33757..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/menu.lst
+++ /dev/null
@@ -1,60 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title LinHes
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title LinHes-splashy
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title STB-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
-initrd /boot/kernel26.img
-
-
-# (3) normal
-title LinHes-init
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1
-initrd /boot/kernel26.img
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.conf b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.conf
deleted file mode 100755
index 1d5b377..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="no"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="soundcore"
-else
- if [ x$Audiotype = xOSS ]
- then
- ALSABLACKLIST="soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST=($ALSABLACKLIST)
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=()
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus avahi-daemon)
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/tweak.sh b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/tweak.sh
deleted file mode 100755
index 5c73cf4..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/post_process/tweak.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
-echo 'setting mythtv password to "a" '
-passwd mythtv </dev/null && \
- [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
- if grep i810 /proc/cmdline &>/dev/null; then
- startx -- -config xorg.conf.i810
- else
- startx
- fi
-
- # Maybe there should be some code here to handle a failed startx?
-
- # The 'return' value is at /tmp/xlogout
- # If there is nothing there, switch user to 'newuser'
- # If there is also nothing there, login as root
- # - if already root, fall through to terminal
-
- if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
- logout
- elif [ ${UID} -ne 0 ]; then
- echo "root" >/tmp/newuser
- logout
- fi
-fi
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer, : float, : "True"/"False",
- ### : "String", : " Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # []
- #Option "SWcursor" # []
- #Option "ColorKey" #
- #Option "CacheLines" #
- #Option "Dac6Bit" # []
- #Option "DRI" # []
- #Option "NoDDC" # []
- #Option "ShowCache" # []
- #Option "XvMCSurfaces" #
- #Option "PageFlip" # []
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer, : float, : "True"/"False",
- ### : "String", : " Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # []
- #Option "SWcursor" # []
- #Option "ColorKey" #
- #Option "CacheLines" #
- #Option "Dac6Bit" # []
- #Option "DRI" # []
- #Option "NoDDC" # []
- #Option "ShowCache" # []
- #Option "XvMCSurfaces" #
- #Option "PageFlip" # []
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/hosts.allow
deleted file mode 100644
index 19bc4d8..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# /etc/hosts.allow
-#
-
-ALL: 127.0.0.1
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-# To allow ssh in from local net (example)
-#sshd: 192.168.178.0/255.255.255.0
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab.larchsave
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble
-# Modified for Debian by alvar Bray
-# Modified for PPP Server setup by Christoph Lameter
-# Modified for ArchLinux by Manolis Tzanidakis
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd
-# will ask the peer to send packets of no more than bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to , a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to . Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu
-
-# Set the name of the local system for authentication purposes to .
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to .)
-#name
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to .
-#remotename
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to seconds
-# (default 3).
-#lcp-restart
-
-# Set the maximum number of LCP terminate-request transmissions to
-# (default 3).
-#lcp-max-terminate
-
-# Set the maximum number of LCP configure-request transmissions to
-# (default 10).
-#lcp-max-configure
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#lcp-max-failure
-
-# Set the IPCP restart interval (retransmission timeout) to
-# seconds (default 3).
-#ipcp-restart
-
-# Set the maximum number of IPCP terminate-request transmissions to
-# (default 3).
-#ipcp-max-terminate
-
-# Set the maximum number of IPCP configure-request transmissions to
-# (default 10).
-#ipcp-max-configure
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#ipcp-max-failure
-
-# Set the PAP restart interval (retransmission timeout) to seconds
-# (default 3).
-#pap-restart
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# (default 10).
-#pap-max-authreq
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to seconds (0 means no limit).
-#pap-timeout
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to seconds (default 3).
-#chap-restart
-
-# Set the maximum number of CHAP challenge transmissions to
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every
-# seconds.
-#chap-interval
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ------
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local
deleted file mode 100755
index 216ec8e..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-#install initial database
-pacman -S --noconfirm mythdb-initial 2>/dev/null
-
-# Set up automatically logged in user (larch live system only)
-if [ -f /.livesys/autologin ]; then
- cp /.livesys/autologin /tmp/newuser
-fi
-
-# Restore saved sound volume, etc.
-#alsactl restore
-#install initial database
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.orig
deleted file mode 100755
index 47b24ef..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.orig
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-# Restore saved sound volume, etc.
-alsactl restore
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.shutdown
deleted file mode 100755
index 2b5f735..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/rc.local.shutdown
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local.shutdown: Local shutdown script.
-#
-
-# Save sound volume, etc.
-alsactl store
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bash_profile
deleted file mode 100644
index 600bd9b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xinitrc
deleted file mode 100644
index c6febe5..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/slim.conf
deleted file mode 100644
index 35ed579..0000000
--- a/build_tools/clarch/larch/profiles/i586-RELEASE-REMOTE/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver /usr/bin/X
-xserver_arguments -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd /sbin/shutdown -h now
-reboot_cmd /sbin/shutdown -r now
-console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path /usr/bin/xauth
-
-# Xauth file for server
-authfile /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd exec /bin/sh - ~/.xinitrc %session
-login_cmd exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd some command
-# sessionstop_cmd some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg The system is halting...
-reboot_msg The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user simone
-
-# current theme, use comma separated list to specify a set to
-# randomly choose from
-current_theme dlarch
-
-# Lock file
-lockfile /var/lock/slim.lock
-
-# Log file
-logfile /var/log/slim.log
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/addedpacks b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/addedpacks
deleted file mode 100644
index 6668d64..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/addedpacks
+++ /dev/null
@@ -1,170 +0,0 @@
-# These are needed to build a live CD
-linhes-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-#ntfsprogs
-#parted
-
-#ddcxinfo-knoppix
-#hwd
-
-sudo
-
-lsof
-cdrkit
-dvd+rw-tools
-
-# Needed by the installer
-#python
-
-#base-devel
-#larch
-
-# generally useful tools which don't require X
-#mtools is required by syslinux
-openssh
-dosfstools
-alsa-lib
-alsa-oss
-alsa-utils
-cdparanoia
-cdrdao
-
-# Xorg packages
-xorg-server
-xorg-xkb-utils
-xorg-xauth
-xorg-server-utils
-xorg-xinit
-xorg-input-drivers
-xterm
-xorg-fonts-100dpi
-xorg-fonts-75dpi
-xorg-res-utils
-
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-# X apps
-#luser
-#localed
-
-#xkmap
-
-#gparted
-#larchin
-
-#mythtv
-mythtv
-mytharchive
-mythbrowser
-mythcontrols
-mythflix
-mythgallery
-mythgame
-mythmusic
-mythphone
-myththemes
-mythweather
-mythweb
-mythvideo
-nuvexport
-lirc
-lirc-utils
-mysql
-xmltv
-esd
-
-#Window Manager
-fluxbox
-feh
-
-#Other
-dbus
-hal
-fftw2
-libcdaudio
-iptables
-pkgconfig
-taglib
-
-#MythVantage Installer deps
-bc
-mysql-python
-expect
-curl
-dnsutils
-
-#Wireless
-b43-fwcutter
-ipw2100-fw
-ipw2200-fw
-ipw3945
-ipw3945-ucode
-ipw3945d
-iwlwifi-3945-ucode
-iwlwifi-4965-ucode
-madwifi
-madwifi-utils
-ndiswrapper
-ndiswrapper-utils
-netcfg
-rt2500
-rt2x00-rt61-fw
-rt2x00-rt71w-fw
-tiacx
-tiacx-firmware
-wireless_tools
-wlan-ng26
-wlan-ng26-utils
-zd1211-firmware
-
-#----
-live-installer
-etcnet
-runit
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cache_packs b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cache_packs
deleted file mode 100644
index b95e6f4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cache_packs
+++ /dev/null
@@ -1 +0,0 @@
-mythdb-initial
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index 26a365a..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,49 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 50
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-label linux
-MENU LABEL LinHES with Splashy (default).
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-nosplash
-MENU LABEL LinHES without splash screen.
-kernel vmlinuz
-append initrd=larch.img
-
-label linux-splash
-MENU LABEL LinHES with splash screen.
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-i810
-MENU LABEL with Intel i810 driver (DRI disabled)
-kernel vmlinuz
-append initrd=larch.img i810
-
-label linux-nox
-MENU LABEL Boot to console (without X windowing)
-kernel vmlinuz
-append initrd=larch.img 3
-
-label linux-c2r
-MENU LABEL LinHES: copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL LinHES: Use swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index 43fbdd2..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/isolinux/vbg.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/actions.rc
deleted file mode 100644
index dd95b26..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/actions.rc
+++ /dev/null
@@ -1,3 +0,0 @@
-type=0
-orientation=1
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/autologin
deleted file mode 100644
index 93ca142..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/autologin
+++ /dev/null
@@ -1 +0,0 @@
-root
\ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/larch0
deleted file mode 100644
index c80b7c2..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/cd-root/larch/copy/larch0
+++ /dev/null
@@ -1,63 +0,0 @@
-# This is a script 'sourced' from the installation script larch-tidy.
-# Its purpose is to remove custom live-only stuff from a just-installed
-# system.
-# ${INSTALL} is the path to the installed system root directory.
-
-rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
-
-if [ -f ${INSTALL}/etc/rc.local.orig ]; then
- mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
-fi
-if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
- mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
-fi
-
-# slim is currently started in inittab
-#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf
-
-# Copy xorg.conf.i810 to target xorg.conf if necessary
-if ! [ -f /etc/X11/xorg.conf ]; then
- if grep i810 /proc/cmdline &>/dev/null; then
- cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf
- fi
-fi
-
-#***************************************************#
-# Replace uses of larchquit in xfce panels and menu.#
-#***************************************************#
-### Unfortunately this isn't very simple. If anyone has a better way of
-### providing different Quit actions in the live version and the version
-### installed to disk from it, please let me know!
-### Maybe it would be better just to provide a special live quit desktop
-### icon which can be removed on installation, like the installation icon.
-
-defaultquit=''
-
-replacequit ()
-{
- for f in ${INSTALL}$1/.config/xfce4/panel/*; do
- if grep "^Exec=larchquit" ${f}; then
- n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" )
- cp /.livesys/actions.rc \
- ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc
- rm ${f}
-
- sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \
- ${INSTALL}$1/.config/xfce4/panel/panels.xml
- fi
- done
-
- if [ -f ${INSTALL}$1/.bash_profile ]; then
- sed -i "s||${defaultquit}|" \
- ${INSTALL}$1/.config/xfce4/desktop/menu.xml
-
- cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session
- cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile
- fi
-}
-
-for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \
- /root /etc/skel; do
- replacequit ${hd} &>/dev/null
-done
-#***************************************************#
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/create_overlay.sh b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/create_overlay.sh
deleted file mode 100755
index 6a4fdee..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/create_overlay.sh
+++ /dev/null
@@ -1 +0,0 @@
-../../run/xpack -r overlay overlay.xpk
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/locale.gen b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/locale.gen
deleted file mode 100644
index 760ec23..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/locale.gen
+++ /dev/null
@@ -1,5 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 5a2b8d6..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {sudo /usr/MythVantage/bin/mythvantage}
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.xinitrc
deleted file mode 100755
index d988c98..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/overlay/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-. /etc/profile
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-# exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/pacman.conf b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/pacman.conf
deleted file mode 100755
index c5fcbfa..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/pacman.conf
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[core-testing]
-Server = http://knoppmyth.net/repo/i586/core-testing
-
-[extra-testing]
-Server = http://knoppmyth.net/repo/i586/extra-testing
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post-process.sh b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post-process.sh
deleted file mode 100755
index 131b907..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.tweak
-chroot $INSTDIR .tweak/tweak.sh
-rm -rf $INSTDIR/.tweak
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 52db7fe..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {mythfrontend}
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
deleted file mode 100644
index aa4040a..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
+++ /dev/null
@@ -1,35 +0,0 @@
-session.screen0.slit.placement: BottomRight
-session.screen0.slit.direction: Vertical
-session.screen0.slit.onTop: False
-session.screen0.slit.autoHide: True
-session.screen0.tab.placement: Top
-session.screen0.toolbar.onTop: False
-session.screen0.toolbar.visible: False
-session.screen0.toolbar.autoHide: False
-session.screen0.toolbar.placement: BottomCenter
-session.screen0.toolbar.widthPercent: 66
-session.screen0.workspaceNames: one,two,three,four
-session.screen0.strftimeFormat: %k:%M
-session.screen0.focusNewWindows: True
-session.screen0.focusModel: ClickToFocus
-session.screen0.fullMaximization: False
-session.screen0.edgeSnapThreshold: 0
-session.screen0.rowPlacementDirection: LeftToRight
-session.screen0.workspaces: 4
-session.screen0.focusLastWindow: True
-session.screen0.colPlacementDirection: TopToBottom
-session.screen0.windowPlacement: RowSmartPlacement
-session.screen0.tab.width: 64
-session.screen0.tab.height: 16
-session.screen0.showwindowposition: true
-session.opaqueMove: False
-session.autoRaiseDelay: 250
-session.menuFile: ~/.fluxbox/menu
-session.cacheLife: 5
-session.styleFile: /usr/share/fluxbox/styles/bora_black
-session.keyFile: ~/.fluxbox/keys
-session.colorsPerChannel: 4
-session.doubleClickInterval: 250
-session.cacheMax: 200
-session.imageDither: True
-session.configVersion: 1
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
deleted file mode 100644
index 858090e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
+++ /dev/null
@@ -1,81 +0,0 @@
-# Generated by fluxbox-generate_menu
-#
-# If you read this it means you want to edit this file manually, so here
-# are some useful tips:
-#
-# - You can add your own menu-entries to ~/.fluxbox/usermenu
-#
-# - If you miss apps please let me know and I will add them for the next
-# release.
-#
-# - The -r option prevents removing of empty menu entries and lines which
-# makes things much more readable.
-#
-# - To prevent any other app from overwriting your menu
-# you can change the menu name in .fluxbox/init to:
-# session.menuFile: /home/mythtv/.fluxbox/my-menu
-[begin] (Fluxbox)
-[encoding] {UTF-8}
- [exec] (xterm) {xterm}
- [exec] () {} execname is NULL; cannot lookup
- [exec] (Run) {fbrun }
-[submenu] (Terminals)
- [exec] (xterm) {xterm}
-[end]
-[submenu] (Editors)
- [exec] (xedit) {xedit}
- [exec] (nano) {xterm -e nano}
- [exec] (vi) {xterm -e vi}
-[end]
-[submenu] (Multimedia)
-[submenu] (Audio)
- [exec] (alsamixer) {xterm -e alsamixer}
-[end]
-[submenu] (Video)
- [exec] (gmplayer) {gmplayer}
-[end]
-[submenu] (X-utils)
- [exec] (xfontsel) {xfontsel}
- [exec] (xman) {xman}
- [exec] (xload) {xload}
- [exec] (xbiff) {xbiff}
- [exec] (xclock) {xclock}
- [exec] (xmag) {xmag}
- [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults}
-[end]
-[end]
-[submenu] (Office)
- [exec] (xclock) {xclock}
- [exec] (xcalc) {xcalc}
-[end]
-[submenu] (Games)
- [exec] (xeyes) {xeyes}
-[end]
-[submenu] (System Tools)
- [exec] (top) {xterm -e top}
-[end]
-[submenu] (fluxbox menu)
- [config] (Configure)
-[submenu] (System Styles) {Choose a style...}
- [stylesdir] (/usr/share/fluxbox/styles)
-[end]
-[submenu] (User Styles) {Choose a style...}
- [stylesdir] (~/.fluxbox/styles)
-[end]
- [workspaces] (Workspace List)
-[submenu] (Tools)
- [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center}
- [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg}
- [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png}
- [exec] (Run) {fbrun }
- [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu }
-[end]
- [commanddialog] (Fluxbox Command)
- [reconfig] (Reload config)
- [restart] (Restart)
- [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center}
- [separator]
- [exit] (Exit)
-[end]
-[endencoding]
-[end]
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
deleted file mode 100644
index ef5b398..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is read by fluxbox-generate_menu. If you don't like a
-# default you can change it here. Don't forget to remove the # in front
-# of the line.
-
-# Your favourite terminal. Put the command in quotes if you want to use
-# options. Put a backslash in before odd chars
-# MY_TERM='Eterm --tint \#123456'
-# MY_TERM='aterm -tint $(random_color)'
-
-# Your favourite browser. You can also specify options.
-# MY_BROWSER=mozilla
-
-# Name of the outputfile
-# MENUFILENAME=/home/mythtv/.fluxbox/menu
-
-# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
-
-# standard url for console-browsers
-# HOMEPAGE=fluxbox.org
-
-# location with your own menu-entries
-# USERMENU=~/.fluxbox/usermenu
-
-# Put the launcher you would like to use here
-# LAUNCHER=fbrun
-# LAUNCHER=fbgm
-
-# Options for fbrun
-# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
-
-# --- PREFIX'es
-# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
-# your prefix is: /usr
-
-# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
-# there should be no need to specify them.
-#
-# PREFIX=/usr
-# GNOME_PREFIX=/opt/gnome
-# KDE_PREFIX=/opt/kde
-
-
-# Sepparate the list of background-dirs with semicolumns ':'
-# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
-
-
-# --- Boolean variables.
-# Setting a variable to no'' won't help. Comment them out if you don't
-# want them. Setting are overruled by the command-line options.
-
-# Include all backgrounds in your backgrounds-directory
-# BACKGROUNDMENUITEM=yes
-
-# Include kde-menus
-# KDEMENU=yes
-
-# Include gnome-menus
-# GNOMEMENU=yes
-
-# enable sudo commands
-# DOSUDO=yes
-
-# Don't cleanup the menu
-# REMOVE=no
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
deleted file mode 100644
index 83da80c..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xinitrc
deleted file mode 100755
index 911e76e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/home/mythtv/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/menu.lst b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/menu.lst
deleted file mode 100755
index ce33757..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/menu.lst
+++ /dev/null
@@ -1,60 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title LinHes
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title LinHes-splashy
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title STB-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
-initrd /boot/kernel26.img
-
-
-# (3) normal
-title LinHes-init
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1
-initrd /boot/kernel26.img
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.conf b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.conf
deleted file mode 100755
index 1d5b377..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="no"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="soundcore"
-else
- if [ x$Audiotype = xOSS ]
- then
- ALSABLACKLIST="soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST=($ALSABLACKLIST)
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=()
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus avahi-daemon)
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/tweak.sh b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/tweak.sh
deleted file mode 100755
index 5c73cf4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/post_process/tweak.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
-echo 'setting mythtv password to "a" '
-passwd mythtv </dev/null && \
- [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
- if grep i810 /proc/cmdline &>/dev/null; then
- startx -- -config xorg.conf.i810
- else
- startx
- fi
-
- # Maybe there should be some code here to handle a failed startx?
-
- # The 'return' value is at /tmp/xlogout
- # If there is nothing there, switch user to 'newuser'
- # If there is also nothing there, login as root
- # - if already root, fall through to terminal
-
- if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
- logout
- elif [ ${UID} -ne 0 ]; then
- echo "root" >/tmp/newuser
- logout
- fi
-fi
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer, : float, : "True"/"False",
- ### : "String", : " Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # []
- #Option "SWcursor" # []
- #Option "ColorKey" #
- #Option "CacheLines" #
- #Option "Dac6Bit" # []
- #Option "DRI" # []
- #Option "NoDDC" # []
- #Option "ShowCache" # []
- #Option "XvMCSurfaces" #
- #Option "PageFlip" # []
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer, : float, : "True"/"False",
- ### : "String", : " Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # []
- #Option "SWcursor" # []
- #Option "ColorKey" #
- #Option "CacheLines" #
- #Option "Dac6Bit" # []
- #Option "DRI" # []
- #Option "NoDDC" # []
- #Option "ShowCache" # []
- #Option "XvMCSurfaces" #
- #Option "PageFlip" # []
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/hosts.allow
deleted file mode 100644
index 19bc4d8..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# /etc/hosts.allow
-#
-
-ALL: 127.0.0.1
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-# To allow ssh in from local net (example)
-#sshd: 192.168.178.0/255.255.255.0
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab.larchsave
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble
-# Modified for Debian by alvar Bray
-# Modified for PPP Server setup by Christoph Lameter
-# Modified for ArchLinux by Manolis Tzanidakis
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd
-# will ask the peer to send packets of no more than bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to , a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to . Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu
-
-# Set the name of the local system for authentication purposes to .
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to .)
-#name
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to .
-#remotename
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to seconds
-# (default 3).
-#lcp-restart
-
-# Set the maximum number of LCP terminate-request transmissions to
-# (default 3).
-#lcp-max-terminate
-
-# Set the maximum number of LCP configure-request transmissions to
-# (default 10).
-#lcp-max-configure
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#lcp-max-failure
-
-# Set the IPCP restart interval (retransmission timeout) to
-# seconds (default 3).
-#ipcp-restart
-
-# Set the maximum number of IPCP terminate-request transmissions to
-# (default 3).
-#ipcp-max-terminate
-
-# Set the maximum number of IPCP configure-request transmissions to
-# (default 10).
-#ipcp-max-configure
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to (default 10).
-#ipcp-max-failure
-
-# Set the PAP restart interval (retransmission timeout) to seconds
-# (default 3).
-#pap-restart
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# (default 10).
-#pap-max-authreq
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to seconds (0 means no limit).
-#pap-timeout
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to seconds (default 3).
-#chap-restart
-
-# Set the maximum number of CHAP challenge transmissions to
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every
-# seconds.
-#chap-interval
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ------
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local
deleted file mode 100755
index 216ec8e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-#install initial database
-pacman -S --noconfirm mythdb-initial 2>/dev/null
-
-# Set up automatically logged in user (larch live system only)
-if [ -f /.livesys/autologin ]; then
- cp /.livesys/autologin /tmp/newuser
-fi
-
-# Restore saved sound volume, etc.
-#alsactl restore
-#install initial database
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.orig
deleted file mode 100755
index 47b24ef..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.orig
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-# Restore saved sound volume, etc.
-alsactl restore
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
deleted file mode 100755
index 2b5f735..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local.shutdown: Local shutdown script.
-#
-
-# Save sound volume, etc.
-alsactl store
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
deleted file mode 100644
index 600bd9b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
deleted file mode 100644
index c6febe5..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/slim.conf
deleted file mode 100644
index 35ed579..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-REMOTE/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver /usr/bin/X
-xserver_arguments -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd /sbin/shutdown -h now
-reboot_cmd /sbin/shutdown -r now
-console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path /usr/bin/xauth
-
-# Xauth file for server
-authfile /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd exec /bin/sh - ~/.xinitrc %session
-login_cmd exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd some command
-# sessionstop_cmd some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg The system is halting...
-reboot_msg The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user simone
-
-# current theme, use comma separated list to specify a set to
-# randomly choose from
-current_theme dlarch
-
-# Lock file
-lockfile /var/lock/slim.lock
-
-# Log file
-logfile /var/log/slim.log
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/addedpacks b/build_tools/clarch/larch/profiles/i586-testing-local/addedpacks
deleted file mode 100644
index 6668d64..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/addedpacks
+++ /dev/null
@@ -1,170 +0,0 @@
-# These are needed to build a live CD
-linhes-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-#ntfsprogs
-#parted
-
-#ddcxinfo-knoppix
-#hwd
-
-sudo
-
-lsof
-cdrkit
-dvd+rw-tools
-
-# Needed by the installer
-#python
-
-#base-devel
-#larch
-
-# generally useful tools which don't require X
-#mtools is required by syslinux
-openssh
-dosfstools
-alsa-lib
-alsa-oss
-alsa-utils
-cdparanoia
-cdrdao
-
-# Xorg packages
-xorg-server
-xorg-xkb-utils
-xorg-xauth
-xorg-server-utils
-xorg-xinit
-xorg-input-drivers
-xterm
-xorg-fonts-100dpi
-xorg-fonts-75dpi
-xorg-res-utils
-
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-# X apps
-#luser
-#localed
-
-#xkmap
-
-#gparted
-#larchin
-
-#mythtv
-mythtv
-mytharchive
-mythbrowser
-mythcontrols
-mythflix
-mythgallery
-mythgame
-mythmusic
-mythphone
-myththemes
-mythweather
-mythweb
-mythvideo
-nuvexport
-lirc
-lirc-utils
-mysql
-xmltv
-esd
-
-#Window Manager
-fluxbox
-feh
-
-#Other
-dbus
-hal
-fftw2
-libcdaudio
-iptables
-pkgconfig
-taglib
-
-#MythVantage Installer deps
-bc
-mysql-python
-expect
-curl
-dnsutils
-
-#Wireless
-b43-fwcutter
-ipw2100-fw
-ipw2200-fw
-ipw3945
-ipw3945-ucode
-ipw3945d
-iwlwifi-3945-ucode
-iwlwifi-4965-ucode
-madwifi
-madwifi-utils
-ndiswrapper
-ndiswrapper-utils
-netcfg
-rt2500
-rt2x00-rt61-fw
-rt2x00-rt71w-fw
-tiacx
-tiacx-firmware
-wireless_tools
-wlan-ng26
-wlan-ng26-utils
-zd1211-firmware
-
-#----
-live-installer
-etcnet
-runit
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cache_packs b/build_tools/clarch/larch/profiles/i586-testing-local/cache_packs
deleted file mode 100644
index b95e6f4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cache_packs
+++ /dev/null
@@ -1 +0,0 @@
-mythdb-initial
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index 26a365a..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,49 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 50
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-label linux
-MENU LABEL LinHES with Splashy (default).
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-nosplash
-MENU LABEL LinHES without splash screen.
-kernel vmlinuz
-append initrd=larch.img
-
-label linux-splash
-MENU LABEL LinHES with splash screen.
-kernel vmlinuz
-append initrd=larch.img vga=791 quiet splash
-
-label linux-i810
-MENU LABEL with Intel i810 driver (DRI disabled)
-kernel vmlinuz
-append initrd=larch.img i810
-
-label linux-nox
-MENU LABEL Boot to console (without X windowing)
-kernel vmlinuz
-append initrd=larch.img 3
-
-label linux-c2r
-MENU LABEL LinHES: copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL LinHES: Use swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index e853718..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/isolinux/vbg.jpg and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/actions.rc
deleted file mode 100644
index dd95b26..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/actions.rc
+++ /dev/null
@@ -1,3 +0,0 @@
-type=0
-orientation=1
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/autologin
deleted file mode 100644
index 93ca142..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/autologin
+++ /dev/null
@@ -1 +0,0 @@
-root
\ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/larch0
deleted file mode 100644
index c80b7c2..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/cd-root/larch/copy/larch0
+++ /dev/null
@@ -1,63 +0,0 @@
-# This is a script 'sourced' from the installation script larch-tidy.
-# Its purpose is to remove custom live-only stuff from a just-installed
-# system.
-# ${INSTALL} is the path to the installed system root directory.
-
-rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
-
-if [ -f ${INSTALL}/etc/rc.local.orig ]; then
- mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
-fi
-if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
- mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
-fi
-
-# slim is currently started in inittab
-#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf
-
-# Copy xorg.conf.i810 to target xorg.conf if necessary
-if ! [ -f /etc/X11/xorg.conf ]; then
- if grep i810 /proc/cmdline &>/dev/null; then
- cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf
- fi
-fi
-
-#***************************************************#
-# Replace uses of larchquit in xfce panels and menu.#
-#***************************************************#
-### Unfortunately this isn't very simple. If anyone has a better way of
-### providing different Quit actions in the live version and the version
-### installed to disk from it, please let me know!
-### Maybe it would be better just to provide a special live quit desktop
-### icon which can be removed on installation, like the installation icon.
-
-defaultquit=''
-
-replacequit ()
-{
- for f in ${INSTALL}$1/.config/xfce4/panel/*; do
- if grep "^Exec=larchquit" ${f}; then
- n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" )
- cp /.livesys/actions.rc \
- ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc
- rm ${f}
-
- sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \
- ${INSTALL}$1/.config/xfce4/panel/panels.xml
- fi
- done
-
- if [ -f ${INSTALL}$1/.bash_profile ]; then
- sed -i "s||${defaultquit}|" \
- ${INSTALL}$1/.config/xfce4/desktop/menu.xml
-
- cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session
- cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile
- fi
-}
-
-for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \
- /root /etc/skel; do
- replacequit ${hd} &>/dev/null
-done
-#***************************************************#
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/create_overlay.sh b/build_tools/clarch/larch/profiles/i586-testing-local/create_overlay.sh
deleted file mode 100755
index 6a4fdee..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/create_overlay.sh
+++ /dev/null
@@ -1 +0,0 @@
-../../run/xpack -r overlay overlay.xpk
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/locale.gen b/build_tools/clarch/larch/profiles/i586-testing-local/locale.gen
deleted file mode 100644
index 760ec23..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/locale.gen
+++ /dev/null
@@ -1,5 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 5a2b8d6..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {sudo /usr/MythVantage/bin/mythvantage}
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.xinitrc
deleted file mode 100755
index d988c98..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/overlay/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-. /etc/profile
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-# exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/pacman.conf b/build_tools/clarch/larch/profiles/i586-testing-local/pacman.conf
deleted file mode 100755
index 337cc76..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/pacman.conf
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[core-testing]
-Server = file:///data/local/pkg_repo/i586/core-testing
-#Server = http://localmirror/repo/r6-testing/
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post-process.sh b/build_tools/clarch/larch/profiles/i586-testing-local/post-process.sh
deleted file mode 100755
index 131b907..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.tweak
-chroot $INSTDIR .tweak/tweak.sh
-rm -rf $INSTDIR/.tweak
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 52db7fe..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {mythfrontend}
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/init
deleted file mode 100644
index aa4040a..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/init
+++ /dev/null
@@ -1,35 +0,0 @@
-session.screen0.slit.placement: BottomRight
-session.screen0.slit.direction: Vertical
-session.screen0.slit.onTop: False
-session.screen0.slit.autoHide: True
-session.screen0.tab.placement: Top
-session.screen0.toolbar.onTop: False
-session.screen0.toolbar.visible: False
-session.screen0.toolbar.autoHide: False
-session.screen0.toolbar.placement: BottomCenter
-session.screen0.toolbar.widthPercent: 66
-session.screen0.workspaceNames: one,two,three,four
-session.screen0.strftimeFormat: %k:%M
-session.screen0.focusNewWindows: True
-session.screen0.focusModel: ClickToFocus
-session.screen0.fullMaximization: False
-session.screen0.edgeSnapThreshold: 0
-session.screen0.rowPlacementDirection: LeftToRight
-session.screen0.workspaces: 4
-session.screen0.focusLastWindow: True
-session.screen0.colPlacementDirection: TopToBottom
-session.screen0.windowPlacement: RowSmartPlacement
-session.screen0.tab.width: 64
-session.screen0.tab.height: 16
-session.screen0.showwindowposition: true
-session.opaqueMove: False
-session.autoRaiseDelay: 250
-session.menuFile: ~/.fluxbox/menu
-session.cacheLife: 5
-session.styleFile: /usr/share/fluxbox/styles/bora_black
-session.keyFile: ~/.fluxbox/keys
-session.colorsPerChannel: 4
-session.doubleClickInterval: 250
-session.cacheMax: 200
-session.imageDither: True
-session.configVersion: 1
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menu
deleted file mode 100644
index 858090e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menu
+++ /dev/null
@@ -1,81 +0,0 @@
-# Generated by fluxbox-generate_menu
-#
-# If you read this it means you want to edit this file manually, so here
-# are some useful tips:
-#
-# - You can add your own menu-entries to ~/.fluxbox/usermenu
-#
-# - If you miss apps please let me know and I will add them for the next
-# release.
-#
-# - The -r option prevents removing of empty menu entries and lines which
-# makes things much more readable.
-#
-# - To prevent any other app from overwriting your menu
-# you can change the menu name in .fluxbox/init to:
-# session.menuFile: /home/mythtv/.fluxbox/my-menu
-[begin] (Fluxbox)
-[encoding] {UTF-8}
- [exec] (xterm) {xterm}
- [exec] () {} execname is NULL; cannot lookup
- [exec] (Run) {fbrun }
-[submenu] (Terminals)
- [exec] (xterm) {xterm}
-[end]
-[submenu] (Editors)
- [exec] (xedit) {xedit}
- [exec] (nano) {xterm -e nano}
- [exec] (vi) {xterm -e vi}
-[end]
-[submenu] (Multimedia)
-[submenu] (Audio)
- [exec] (alsamixer) {xterm -e alsamixer}
-[end]
-[submenu] (Video)
- [exec] (gmplayer) {gmplayer}
-[end]
-[submenu] (X-utils)
- [exec] (xfontsel) {xfontsel}
- [exec] (xman) {xman}
- [exec] (xload) {xload}
- [exec] (xbiff) {xbiff}
- [exec] (xclock) {xclock}
- [exec] (xmag) {xmag}
- [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults}
-[end]
-[end]
-[submenu] (Office)
- [exec] (xclock) {xclock}
- [exec] (xcalc) {xcalc}
-[end]
-[submenu] (Games)
- [exec] (xeyes) {xeyes}
-[end]
-[submenu] (System Tools)
- [exec] (top) {xterm -e top}
-[end]
-[submenu] (fluxbox menu)
- [config] (Configure)
-[submenu] (System Styles) {Choose a style...}
- [stylesdir] (/usr/share/fluxbox/styles)
-[end]
-[submenu] (User Styles) {Choose a style...}
- [stylesdir] (~/.fluxbox/styles)
-[end]
- [workspaces] (Workspace List)
-[submenu] (Tools)
- [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center}
- [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg}
- [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png}
- [exec] (Run) {fbrun }
- [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu }
-[end]
- [commanddialog] (Fluxbox Command)
- [reconfig] (Reload config)
- [restart] (Restart)
- [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center}
- [separator]
- [exit] (Exit)
-[end]
-[endencoding]
-[end]
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
deleted file mode 100644
index ef5b398..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is read by fluxbox-generate_menu. If you don't like a
-# default you can change it here. Don't forget to remove the # in front
-# of the line.
-
-# Your favourite terminal. Put the command in quotes if you want to use
-# options. Put a backslash in before odd chars
-# MY_TERM='Eterm --tint \#123456'
-# MY_TERM='aterm -tint $(random_color)'
-
-# Your favourite browser. You can also specify options.
-# MY_BROWSER=mozilla
-
-# Name of the outputfile
-# MENUFILENAME=/home/mythtv/.fluxbox/menu
-
-# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
-
-# standard url for console-browsers
-# HOMEPAGE=fluxbox.org
-
-# location with your own menu-entries
-# USERMENU=~/.fluxbox/usermenu
-
-# Put the launcher you would like to use here
-# LAUNCHER=fbrun
-# LAUNCHER=fbgm
-
-# Options for fbrun
-# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
-
-# --- PREFIX'es
-# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
-# your prefix is: /usr
-
-# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
-# there should be no need to specify them.
-#
-# PREFIX=/usr
-# GNOME_PREFIX=/opt/gnome
-# KDE_PREFIX=/opt/kde
-
-
-# Sepparate the list of background-dirs with semicolumns ':'
-# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
-
-
-# --- Boolean variables.
-# Setting a variable to no'' won't help. Comment them out if you don't
-# want them. Setting are overruled by the command-line options.
-
-# Include all backgrounds in your backgrounds-directory
-# BACKGROUNDMENUITEM=yes
-
-# Include kde-menus
-# KDEMENU=yes
-
-# Include gnome-menus
-# GNOMEMENU=yes
-
-# enable sudo commands
-# DOSUDO=yes
-
-# Don't cleanup the menu
-# REMOVE=no
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png
deleted file mode 100644
index 83da80c..0000000
Binary files a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png and /dev/null differ
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xinitrc
deleted file mode 100755
index 911e76e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/home/mythtv/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/menu.lst
deleted file mode 100755
index ce33757..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/menu.lst
+++ /dev/null
@@ -1,60 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title LinHes
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title LinHes-splashy
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title STB-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
-initrd /boot/kernel26.img
-
-
-# (3) normal
-title LinHes-init
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1
-initrd /boot/kernel26.img
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.conf
deleted file mode 100755
index 856b0be..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="yes"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="soundcore"
-else
- if [ x$Audiotype = xOSS ]
- then
- ALSABLACKLIST="soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST=($ALSABLACKLIST)
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=()
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus avahi-daemon)
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/tweak.sh b/build_tools/clarch/larch/profiles/i586-testing-local/post_process/tweak.sh
deleted file mode 100755
index 5c73cf4..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/post_process/tweak.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
-echo 'setting mythtv password to "a" '
-passwd mythtv </dev/null && \
- [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
- if grep i810 /proc/cmdline &>/dev/null; then
- startx -- -config xorg.conf.i810
- else
- startx
- fi
-
- # Maybe there should be some code here to handle a failed startx?
-
- # The 'return' value is at /tmp/xlogout
- # If there is nothing there, switch user to 'newuser'
- # If there is also nothing there, login as root
- # - if already root, fall through to terminal
-
- if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
- logout
- elif [ ${UID} -ne 0 ]; then
- echo "root" >/tmp/newuser
- logout
- fi
-fi
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer, : float, : "True"/"False",
- ### : "String", : " Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # []
- #Option "SWcursor" # []
- #Option "ColorKey" #
- #Option "CacheLines" #
- #Option "Dac6Bit" # []
- #Option "DRI" # []
- #Option "NoDDC" # []
- #Option "ShowCache" # []
- #Option "XvMCSurfaces" #
- #Option "PageFlip" # []
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/clarch/larch/profiles/i586-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: : integer,