Removed old core and extra from repo. Renamed -testing to core/extra. This will setup the base for the testing branch.

24 files changed, 0 insertions, 1675 deletions

diff --git a/abs/core-testing/LinHES-system/LinHES-profile.sh b/abs/core-testing/LinHES-system/LinHES-profile.sh
deleted file mode 100644
index 830b819..0000000
--- a/abs/core-testing/LinHES-system/LinHES-profile.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/bash
-export LinHES_ROOT=/usr/LH
-export PATH=$PATH:/usr/LH/bin
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-system/LinHES-run b/abs/core-testing/LinHES-system/LinHES-run
deleted file mode 100755
index d5a3a15..0000000
--- a/abs/core-testing/LinHES-system/LinHES-run
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/bin/sh
-function msg(){
-    echo -e "$1"  | osd_cat --pos=middle --align=center --offset=200 --delay=5 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font &
-}
-
-. /etc/profile
-. /etc/systemconfig
-. /etc/unclutter.cfg || {
-	idle=1
-	jitter=200
-}
-. /etc/osd_cat.cfg || {
-	color=yellow
-	outline=2
-	outlinecolour=black
-	shadow=0
-	shadowcolour=black
-	font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
-}
-#keylaunch &
-#/usr/bin/tilda &
-
-#move mouse to corner
-xdotool mousemove 0 0 
-/usr/X11R6/bin/unclutter -root -idle $idle -jitter $jitter -noevents  &
-if [ x"$Screensavertype" = "xgscreensaver" ]
-then
-    gnome-screensaver &
-elif  [ x"$Screensavertype" = "xxscreensaver" ]
-then
-    xscreensaver  -no-splash &
-fi
-
-/usr/bin/xvattr -a XV_COLORKEY -v 0
-mtd &
-#/usr/bin/nvidia-settings -l
-#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
-
-if [ x$ShowTips = "x1" ]
-then
-    msg "Alt+h for help" &
-fi
-
-# Run any scripting that applies to special hardware.  These brand-specific commands that run
-# after Tweaker will, of course, override generic or hardware-specific settings.
-SpecialHardwareCommands() {
-    special_hardware_file=/myth/.special_hardware_type
-    special_hardware=`cat $special_hardware_file`
-
-    case $special_hardware in
-	dragon*)
-	    sudo -E twk_audio.pl --implement digital
-	    sudo -E twk_dragon.pl --implement all
-	    ;;
-	ausdragon*)
-	    ;;
-	*)
-	    # there are no brand-specific commands for configuring whatever
-	    # special hardware the user chose
-	    ;;
-    esac
-}
-
-#update apple trailers
-if [[ x$RunFrontend = x1 && -f ~/.configure ]]
-then
-    /usr/bin/php -q /usr/bin/myth_trailers_grabber > /home/mythtv/appletrailer.xml && /usr/bin/fix_aple_url.sh 2>/dev/null &
-fi
-
-
-if [ !  $SystemType = "Frontend_only" ]
-then
-    if [  -f ~/.configure ]
-    then
-	# Run Tweaker, which applies generic and hardware-specific settings
-	if [ ! -f ~/.no_meth ]
-	then
-            sudo -E tweaker.pl
-            /bin/rm /tmp/fps # ??? clean up a temp file that will eventually be obsolete anyway
-            # Run any brand-specific commands, if necessary.
-            SpecialHardwareCommands
-        else
-	    rm -f ~/.no_meth
-	fi
-	sudo pacman -R myth2ipod myt2xvid3
-	sudo pacman -S --noconfirm myth2ipod myt2xvid3
-    sudo sv stop mythbackend
-	cat /data/database/dvd_transcode_r6.sql | mysql -u root mythconverg
-    xterm -fn *18* -e sudo taskset -c 0 /usr/bin/mythtv-setup
-    sudo sv start mythbackend
-	sudo chown -R mythtv.mythtv /home/mythtv
-    nice -n 19 mythfilldatabase --quiet &
-    msg "Guide data is being loaded. \n Until this completes\n some shows will appear as unknown \n in the program guide."
-    rm ~/.configure
-    fi
-fi
-
-
-if [ x"$UseMythWelcome" = "x1" ]
-then
-    STARTCMD="/usr/bin/mythwelcome"
-else
-    STARTCMD="/usr/bin/mythfrontend -d -l /var/log/mythtv/mythfrontend.log"
-fi
-
-echo "====================================================================="
-echo "Starting $STARTCMD"
-firstboot.sh &
-
-if [ -f /tmp/nomfe ]
-then
-    exit 0
-else
-    if [ -f /tmp/debug ]
-    then
-        echo "using gbd/debug"
-        gdb /usr/bin/mythfrontend -x $MV_ROOT/mfegdbcommands.txt
-        mv gdb.txt gdb.txt.mythfrontend
-        sleep 10
-    else
-        killall -9 irexec
-        /usr/bin/irexec -d
-        $STARTCMD 2>&1
-    fi
-fi
-
diff --git a/abs/core-testing/LinHES-system/LinHES-session b/abs/core-testing/LinHES-system/LinHES-session
deleted file mode 100755
index 52924d2..0000000
--- a/abs/core-testing/LinHES-system/LinHES-session
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-. /etc/profile
-. /etc/systemconfig
-
-xhost +local:
-xhost +127.0.0.1
-xset -dpms s off
-export MALLOC_CHECK_=0
-#start fluxbox
-fluxbox > /var/log/fluxbox.log 2>&1
-
-
-
diff --git a/abs/core-testing/LinHES-system/LinHES-start b/abs/core-testing/LinHES-system/LinHES-start
deleted file mode 100755
index 3157a2e..0000000
--- a/abs/core-testing/LinHES-system/LinHES-start
+++ /dev/null
@@ -1,162 +0,0 @@
-#!/bin/sh
-# $Xorg: startx.cpp,v 1.3 2000/08/17 19:54:29 cpqbld Exp $
-#
-# This is just a sample implementation of a slightly less primitive
-# interface than xinit.  It looks for user .xinitrc and .xserverrc
-# files, then system xinitrc and xserverrc files, else lets xinit choose
-# its default.  The system xinitrc should probably do things like check
-# for .Xresources files and merge them in, startup up a window manager,
-# and pop a clock and serveral xterms.
-#
-# Site administrators are STRONGLY urged to write nicer versions.
-#
-# $XFree86: xc/programs/xinit/startx.cpp,v 3.16tsi Exp $
-. /etc/profile
-
-unset DBUS_SESSION_BUS_ADDRESS
-unset SESSION_MANAGER
-
-userclientrc=/etc/X11/Sessions/LinHES
-userserverrc=$HOME/.xserverrc
-sysclientrc=/usr/X11R6/lib/X11/xinit/xinitrc
-sysserverrc=/usr/X11R6/lib/X11/xinit/xserverrc
-defaultclient=/usr/X11R6/bin/xterm
-defaultserver=/usr/X11R6/bin/X
-defaultclientargs=""
-defaultserverargs=""
-clientargs=""
-serverargs=""
-
-
-
-
-
-
-if [ -f $userclientrc ]; then
-    defaultclientargs=$userclientrc
-elif [ -f $sysclientrc ]; then
-    defaultclientargs=$sysclientrc
-fi
-
-
-
-
-if [ -f $userserverrc ]; then
-    defaultserverargs=$userserverrc
-elif [ -f $sysserverrc ]; then
-    defaultserverargs=$sysserverrc
-fi
-
-whoseargs="client"
-while [ x"$1" != x ]; do
-    case "$1" in
-    # '' required to prevent cpp from treating "/*" as a C comment.
-    /''*|\./''*)
-	if [ "$whoseargs" = "client" ]; then
-	    if [ x"$clientargs" = x ]; then
-		client="$1"
-	    else
-		clientargs="$clientargs $1"
-	    fi
-	else
-	    if [ x"$serverargs" = x ]; then
-		server="$1"
-	    else
-		serverargs="$serverargs $1"
-	    fi
-	fi
-	;;
-    --)
-	whoseargs="server"
-	;;
-    *)
-	if [ "$whoseargs" = "client" ]; then
-	    clientargs="$clientargs $1"
-	else
-	    # display must be the FIRST server argument
-	    if [ x"$serverargs" = x ] && \
-		 expr "$1" : ':[0-9][0-9]*$' > /dev/null 2>&1; then
-		display="$1"
-	    else
-		serverargs="$serverargs $1"
-	    fi
-	fi
-	;;
-    esac
-    shift
-done
-
-# process client arguments
-if [ x"$client" = x ]; then
-    # if no client arguments either, use rc file instead
-    if [ x"$clientargs" = x ]; then
-	client="$defaultclientargs"
-    else
-	client=$defaultclient
-    fi
-fi
-
-# process server arguments
-if [ x"$server" = x ]; then
-    # if no server arguments or display either, use rc file instead
-    if [ x"$serverargs" = x -a x"$display" = x ]; then
-	server="$defaultserverargs"
-    else
-	server=$defaultserver
-    fi
-fi
-
-if [ x"$XAUTHORITY" = x ]; then
-    XAUTHORITY=$HOME/.Xauthority
-    export XAUTHORITY
-fi
-
-removelist=
-
-
-# set up default Xauth info for this machine
-case `uname` in
-Linux*)
-	if [ -z "`hostname --version 2>&1 | grep GNU`" ]; then
-		hostname=`hostname -f`
-	else
-		hostname=`hostname`
-	fi
-	;;
-*)
-	hostname=`hostname`
-	;;
-esac
-
-authdisplay=${display:-:0}
-mcookie=`mcookie`
-for displayname in $authdisplay $hostname$authdisplay; do
-    if ! xauth list "$displayname" | grep "$displayname " >/dev/null 2>&1; then
-        xauth -q << EOF 
-add $displayname . $mcookie
-EOF
-	removelist="$displayname $removelist"
-    fi
-done
-
-
-xinit $client $clientargs -- $server $display -logverbose 6 $serverargs
-
-if [ x"$removelist" != x ]; then
-    xauth remove $removelist
-fi
-
-
-
-
-
-if command -v deallocvt > /dev/null 2>&1; then
-    deallocvt
-fi
-
-
-
-
-
-
-
diff --git a/abs/core-testing/LinHES-system/LinHES.install b/abs/core-testing/LinHES-system/LinHES.install
deleted file mode 100644
index 0f6689e..0000000
--- a/abs/core-testing/LinHES-system/LinHES.install
+++ /dev/null
@@ -1,98 +0,0 @@
-# This is a default template for a post-install scriptlet.  You can
-# remove any functions you don't need (and this header).
-
-# arg 1:  the new package version
-pre_install() {
-/bin/true
-}
-
-# arg 1:  the new package version
-post_install() {
-MVDIR=/usr/LH/bin
-#	ln -s  $MVDIR/backup_job /etc/cron.daily/backup_cron
-#	ln -s  $MVDIR/update_system  /etc/cron.daily/xupdate_system_cron
-#	ln -s  $MVDIR/repo_sync.sh  /etc/cron.daily/zrepo_sync.sh
-	if [ ! -e /etc/cron.daily/myth_mtc.sh ]
-	then
-		ln -s  $MVDIR/myth_mtc.sh  /etc/cron.daily/myth_mtc.sh
-	fi
-
-#LINE="mythtv    ALL = NOPASSWD: /sbin/sv stop mythbackend"
-LINE="mythtv 	ALL=(ALL)       NOPASSWD: ALL"
-LINE1="%wheel 	ALL=(ALL)       NOPASSWD: ALL"
-
-
-for i in "$LINE" "$LINE1" "$LINE2" "$LINE3" "$LINE4" "$LINE5" "$LINE7" "$LINE8" "$LINE9"  "$LINE10" "$LINE11" "$LINE12" "$LINE13" "$LINE14" "$LINE15" "$LINE16"
-do
-        cp /etc/sudoers /etc/sudoers.bak
-        grep -q "$i" /etc/sudoers
-        if [ $? != 0 ]
-        then
-                echo  "$i" >> /etc/sudoers
-                visudo -cf /etc/sudoers
-                if [ ! $? = 0 ]
-                then
-                        cp /etc/sudoers.bak /etc/sudoers
-			echo $i
-                        echo "Error adding files"
-                        exit 1
-                fi
-        fi
-done
-
-REALTIME="session         required        pam_limits.so"
-grep -q "pam_limits.so" /etc/pam.d/su
-        if [ $? != 0 ]
-        then
-		echo "$REALTIME" >>  /etc/pam.d/su
-
-	fi
-
-# Update mythtv's fluxbox keys files to use the tvterm.sh script to get 
-# an xterm. Then signal fluxbox to re-read the keys file.
-
-sed -i.orig 's/^Mod1 x :.*xterm.*$/Mod1 x :ExecCommand tvterm.sh/g' \
-  ~mythtv/.fluxbox/keys
-pkill -HUP fluxbox
-
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-pre_upgrade() {
-	if [ -e  /etc/cron.daily/backup_cron ]
-	then
-		rm -f  /etc/cron.daily/backup_cron
-	fi
-	if [ -e /etc/cron.daily/xupdate_system_cron ]
-	then
-		rm -f /etc/cron.daily/xupdate_system_cron
-	fi
-
-	if [ -e /etc/cron.daily/myth_mtc.py ]
-	then
-		rm -f /etc/cron.daily/myth_mtc.py
-	fi
-
-
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-post_upgrade() {
-	post_install
-}
-
-# arg 1:  the old package version
-pre_remove() {
-  /bin/true
-}
-
-# arg 1:  the old package version
-post_remove() {
-  /bin/true
-}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core-testing/LinHES-system/PKGBUILD b/abs/core-testing/LinHES-system/PKGBUILD
deleted file mode 100755
index 0e699f4..0000000
--- a/abs/core-testing/LinHES-system/PKGBUILD
+++ /dev/null
@@ -1,56 +0,0 @@
-pkgname=LinHES-system
-pkgver=1.1
-pkgrel=32
-arch=('i686')
-MVDIR=$startdir/pkg/usr/LH
-BINDIR=$startdir/pkg/usr/bin
-install=LinHES.install
-pkgdesc="scripts and things related to having a automated system"
-depends=(linhes-sounds xdotool)
-backup=(etc/modprobe.d/alsa-base)
-binfiles="LinHES-start optimize_mythdb.py myth_mtc.py myth_mtc.sh LinHES-run firstboot.sh load-modules-mythvantage.sh unclutter-toggle.sh tvterm.sh myth_mtc.lr smolt.cron mythfrontend-start"
-
-source=(LinHES-session LinHES-profile.sh $binfiles alsa-base)
-
-build() {
-        cd $startdir/src
-        install -m755 -D LinHES-session $startdir/pkg/etc/X11/Sessions/LinHES
-    	install -m755 -D LinHES-profile.sh $startdir/pkg/etc/profile.d/LinHES-profile.sh
-        ####### install to /usr/LH/bin
-        for i in $binfiles
-        do
-        	item=$i
-        	install -m755 -D $item $MVDIR/bin/$item
-        	echo $item
-        done
-
-        cd $startdir/bin
-        for i in *
-        do
-        	item=$i
-        	install -m755 -D $item $MVDIR/bin/$item
-        	echo $item
-        done	
-
-        install -m755 -D $startdir/src/alsa-base $startdir/pkg/etc/modprobe.d/alsa-base
-        install -m755 -D $startdir/src/smolt.cron $startdir/pkg/etc/cron.weekly/smolt.cron
-        mkdir $startdir/pkg/etc/logrotate.d
-        cp $startdir/myth_mtc.lr $startdir/pkg/etc/logrotate.d
-}
-
-
-md5sums=('19934a456d0e112298b8aac3279f9a16'
-         '5881bdb43d578ec3a79d1f77ea58a3db'
-         'a875ee97f86e46f34a741c2bc455f894'
-         'cdcbc530224215f8fcf7ebcd93d7eb0b'
-         'c60b6c66f498809a6e5ca18a8c97d336'
-         'ccae1296ef248fa52ec3a7cb820a476e'
-         'b58b59c05faeefd4acbbb7876215c875'
-         '18a884a73344ff6eb74f63b49745e0f5'
-         'dc3eef2a624754e16805d72bbe488b67'
-         'dc0be354ce77ba2b89868fc29b942c43'
-         '542e670e78d117657f93141e9689f54d'
-         'f1870a9522c79e6b248fcbf81dec3280'
-         'abe887472a170bd1a8e6da6a7b7e93e4'
-         '752488eb8bfb672ce0e4c924f7faf3d1'
-         'eb879fee9603a05d5420d4ce8ed9e450')
diff --git a/abs/core-testing/LinHES-system/alsa-base b/abs/core-testing/LinHES-system/alsa-base
deleted file mode 100644
index bf99ac3..0000000
--- a/abs/core-testing/LinHES-system/alsa-base
+++ /dev/null
@@ -1,10 +0,0 @@
-# Prevent abnormal drivers from grabbing index 0
-options bt87x index=-2
-options cx88_alsa index=-2
-options saa7134-alsa index=-2
-options snd-atiixp-modem index=-2
-options snd-intel8x0m index=-2
-options snd-via82xx-modem index=-2
-options snd-usb-audio index=-2
-options snd-usb-usx2y index=-2
-options snd-usb-caiaq index=-2
diff --git a/abs/core-testing/LinHES-system/bin/backupcommon b/abs/core-testing/LinHES-system/bin/backupcommon
deleted file mode 100644
index d112341..0000000
--- a/abs/core-testing/LinHES-system/bin/backupcommon
+++ /dev/null
@@ -1,382 +0,0 @@
-#!/bin/bash
-
-. /usr/LH/bin/library.sh || {
-    echo 1>&2 "Can not load common library!"
-    exit 1
-}
-
-# You need to be root at least via sudo for the backup utilities to work.
-must_be_root
-
-#----------------------------------------------------------------------------
-DATABASE="mythconverg"
-DATABASE_DIR="/data/srv/mysql/$DATABASE"
-BACKUP_LIST="./root ./home ./etc
-             ./var/lib/alsa/asound.state"
-RESTORE_LIST="./root ./home ./etc/mythtv/modules ./etc/lirc
-              ./etc/X11/xorg.conf ./etc/asound.conf ./etc/default/aumix
-              ./var/lib/alsa/asound.state ./etc/mplayer/mplayer.conf
-              ./etc/localtime ./etc/timezone ./etc/asound.state"
-# Both BLACK_LIST and IGNORE_LIST need to have only one file per line
-# They also can't have any extra whitespace...
-# Files and directories we should refuse to restore
-BLACK_LIST='./etc/fstab
-./etc/modules
-./proc
-./dev
-./lib
-./var/lib
-./myth
-./myth/backup
-./home/mythtv/.my.cnf
-./root/.my.cnf
-./home/mythtv/.Xauthority
-./root/.Xauthority'
-# Files we ignore as differences
-IGNORE_LIST='./home/mythtv/.upgrade
-./home/mythtv/.configure
-./home/mythtv/.newcard
-./home/mythtv/.xscreensaver
-./home/mythtv/appletrailer.xml
-./root/ati-driver-installer-8-01-x86.x86_64.run
-./root/ati-driver-installer-8-3-x86.x86_64.run
-./root/mythstreamweb.tar
-./home/mythtv/.Xauthority
-./root/.Xauthority'
-BACKUP_DIR="/myth/backup"
-BACKUP_EXTRAS="$BACKUP_DIR/backup.list"
-RESTORE_EXTRAS="$BACKUP_DIR/restore.list"
-BACKUP_TAR="$BACKUP_DIR/savedfiles.tar"
-BACKUP_SQL="$BACKUP_DIR/$DATABASE.sql"
-#DROP_SQL="/usr/local/share/knoppmyth/drop.sql"
-UTIL_DIR="/usr/LH/bin"
-# Do we really still need to update from myth-0.11 to myth-0.12 ?
-UPDATE_SQL="/usr/share/mythtv/sql/0.11-to-0.12.sql"
-UPDATE_FILES="$UTIL_DIR/restore_fixups.sh"
-COMPRESSION=".gz"
-SOUNDS="/usr/share/sounds"
-SILENCE="$SOUNDS/half_second_of_silence.wav"
-PLAYER="/usr/bin/aplay"
-#----------------------------------------------------------------------------
-AWK=/bin/awk
-BASH=/bin/bash
-BUNZIP2=/bin/bunzip2
-BZIP2=/bin/bzip2
-CAT=/bin/cat
-CHMOD=/bin/chmod
-CHOWN=/bin/chown
-EGREP=/bin/egrep
-GREP=/bin/grep
-GUNZIP=/bin/gunzip
-GZIP=/bin/gzip
-LS=/bin/ls
-MV=/bin/mv
-RM=/bin/rm
-SED=/bin/sed
-TAR=/bin/tar
-TR=/bin/tr
-DIFF=/usr/bin/diff
-FIND=/usr/bin/find
-MD5SUM=/usr/bin/md5sum
-MYISAMCHK=/usr/bin/myisamchk
-MYSQL=/usr/bin/mysql
-MYSQLADMIN=/usr/bin/mysqladmin
-MYSQLDUMP=/usr/bin/mysqldump
-MYTHSHUTDOWN=/usr/bin/mythshutdown
-SORT=/usr/bin/sort
-WC=/usr/bin/wc
-SV=/sbin/sv
-
-#----------------------------------------------------------------------------
-
-require file+r+x $AWK $BASH $BUNZIP2 $BZIP2 $CAT $CHMOD $CHOWN $EGREP $GREP \
-                 $GUNZIP $GZIP $LS $MV $RM $SED $TAR $TR $DIFF $FIND $MD5SUM \
-                 $MYISAMCHK $MYSQL $MYSQLADMIN $MYSQLDUMP $MYTHSHUTDOWN \
-                 $SORT $WC $SV
-
-#require file+r "$DROP_SQL"
-
-require dir+r+w+x /tmp "$BACKUP_DIR" "$DATABASE_DIR"
-
-play_sound () {
-    ($PLAYER $SILENCE $SOUNDS/$1 >& /dev/null)&
-}
-
-# Filter against an exclude list like the black list or the ignore list above
-filter_list () {
-    $GREP -vxF "$*" |
-    $SORT -u
-}
-
-# Some people just can't read or follow directions... :-/
-# This should track the directory names in the default backup list above
-# We also use this to short circuit a certain incredibly dumb stunt
-filter_redundant () {
-    filter_list "$($TR -s ' ' '\n' <<<"$BACKUP_LIST ./myth")" |
-    $EGREP -v '^\./(root|home|etc|myth)/' |
-    $SORT -u
-}
-
-get_extras () {
-    # One entry per line, and normalize the prefix
-    $TR ' ' '\n' <"$1" |
-    $AWK '/^$/ {next}
-          /^\.\// {print $0 ; next}
-          /^\// {print "." $0 ; next}
-          { print "./" $0}'
-}
-
-[ -f "$BACKUP_EXTRAS" ] &&
-    BACKUP_LIST="$BACKUP_LIST $(get_extras $BACKUP_EXTRAS |
-                                filter_redundant)"
-
-[ -f "$RESTORE_EXTRAS" ] &&
-    RESTORE_LIST="$RESTORE_LIST $(get_extras $RESTORE_EXTRAS |
-                                  filter_list "$BLACK_LIST")"
-
-# Build tar exclusion parameters out of $BLACK_LIST
-EXCLUSION=""
-case $0 in
-*restore)
-    for file in $BLACK_LIST ; do
-        EXCLUSION="$EXCLUSION --exclude $file "
-    done
-    ;;
-*)
-    ;;
-esac
-
-shrink () {
-    case "$COMPRESSION" in
-    .gz)
-        $GZIP -9 "$@"
-        ;;
-    .bz2)
-        $BZIP2 -9 "$@"
-        ;;
-    *)
-        ;;
-    esac
-}
-
-expand () {
-    case "$*" in
-    *.gz)
-        $GUNZIP "$@"
-        ;;
-    *.bz2)
-        $BUNZIP2 "$@"
-        ;;
-    -c\ *)
-        $CAT $2 /dev/null
-        ;;
-    -t\ *)
-        return 0
-        ;;
-    *)
-        echo 1>&2 "Error, unknown file type!"
-        return 1
-        ;;
-    esac
-}
-
-single_format () {
-    candidates=$($LS -1 "$1.gz" "$1.bz2" "$1" 2>/dev/null)
-    case $($WC -l <<<"$candidates") in
-    1)  return 0  # One is good!
-    	;;
-    0)  echo "Error, no $1 found!"
-    	return 1
-        ;;
-    *)  echo "Warning, multiple formats for $1 found!"
-    	echo "Candidates are: $candidates"
-        ;;
-    esac
-}
-
-compression_type () {
-    for compression in .gz .bz2 "" ; do
-        if [ -f "$1$compression" ] ; then
-            echo "$compression"
-            return 0
-        fi
-    done
-    return 1
-}
-
-backup_roller () { # Gets the rollover sequence to use.
-    prev_i=$1 ; shift
-    for i in "$@" ; do
-        for c in .gz .bz2 "" ; do
-            for f in $BACKUP_SQL $BACKUP_TAR ; do
-                $RM -f $f$c$prev_i
-                if [ -f "$f$c$i" ] ; then
-                    echo "Moving $f$c$i to $f$c$prev_i"
-                    $MV -f $f$c$i $f$c$prev_i
-                fi
-            done
-        done
-        prev_i="$i"
-    done
-}
-
-# Given "subset A B" return true if is A a subset of B
-subset () {
-    cnt=$($DIFF $1 $2 | $GREP '^<' | $WC -l)
-    [ "$cnt" -eq 0 ] && return 0
-    $DIFF $1 $2
-}
-
-mysql_cmd () {
-    $MYSQL -u root $DATABASE -sBe "$*"
-}
-
-mysql_stdin () {
-    $MYSQL -u root $DATABASE -sB
-}
-
-check_files () {
-    OBJECT_LIST="$*"
-    LIVE_FILES=/tmp/live_files_$$
-    SAVED_FILES=/tmp/saved_files_$$
-
-    echo "Checking for the existance of the backup tar file..."
-    single_format "$BACKUP_TAR"
-    c=$(compression_type "$BACKUP_TAR") ||
-        { echo "Error, missing tar file - '$BACKUP_TAR$c'." ; return 1 ; }
-    echo "Using file $BACKUP_TAR$c"
-    echo "Backup tar file exists. Checking the compression..."
-    expand -t $BACKUP_TAR$c ||
-        { echo "Error, bad compressed tarball - '$BACKUP_TAR$c'." ; return 1 ; }
-    echo "Compression looks OK. Checking backup tar file contents..."
-
-    echo "Generating a list of the backup contents..."
-    {
-    expand -c $BACKUP_TAR$c |
-      $TAR tf - $OBJECT_LIST $EXCLUSION |
-      $SED '/\/$/s///' |
-      filter_list "$IGNORE_LIST" >$SAVED_FILES
-    } 2>&1 | $SED -e '/Error exit delayed from previous errors/d'
-
-    echo "Generating a list of the directory contents..."
-    cd /
-    $FIND $OBJECT_LIST \( -type d -or -type f -or -type l \) -print |
-      filter_list "$IGNORE_LIST" >$LIVE_FILES
-
-    echo "Comparing directory versus backup contents..."
-    case $0 in
-    *backup) # backup must contain everything selected from the directories
-        subset $LIVE_FILES $SAVED_FILES
-        ;;
-    *restore) # directories must contain everything selected from the backup
-        subset $SAVED_FILES $LIVE_FILES
-        ;;
-    *)
-        $DIFF $LIVE_FILES $SAVED_FILES
-        ;;
-    esac
-    FILE_STATUS=$?
-    $RM $LIVE_FILES $SAVED_FILES
-    if [ $FILE_STATUS -eq 0 ] ; then
-        echo "Live and saved file lists match."
-    else
-        echo "Warning, file lists are not identical!"
-    fi
-    return $FILE_STATUS
-}
-
-has_records () {
-    filename="$1"
-    description="$2"
-    if [ $($WC -l < "$filename") -eq 0 ] ; then
-        echo "Warning, could not get record counts from $description!"
-        return 1
-    fi
-    if [ $($AWK '{cnt+=$2} END {print cnt}' < "$filename") -eq 0 ] ; then
-        echo "Warning, total record count from $description is zero!"
-        return 1
-    fi
-    return 0
-}
-
-check_tables () {
-    LIVE_TABLES=/tmp/live_tables_$$
-    SAVED_TABLES=/tmp/saved_tables_$$
-
-    echo "Checking for the existance of the DB dump file..."
-    single_format "$BACKUP_SQL"
-    c=$(compression_type "$BACKUP_SQL") ||
-        { echo "Error, missing DB dump - '$BACKUP_SQL$c'" ; return 1 ; }
-    echo "Using file $BACKUP_SQL$c"
-    echo "DB dump file exists. Checking the compression..."
-    expand -t $BACKUP_SQL$c ||
-        { echo "Error, bad compressed DB dump - '$BACKUP_SQL$c'." ; return 1 ; }
-    echo "Compression looks OK. Checking DB dump contents..."
-
-    echo "Generating a list of tables and record counts in the DB dump..."
-    expand -c "$BACKUP_SQL$c" |
-      $AWK '/CREATE TABLE/ { tbl = $3; gsub("`","",tbl); records[tbl] = 0; } \
-        /INSERT INTO/  { tbl = $3; gsub("`","",tbl); \
-                         n = split(substr($0,index($0,"VALUES (")+7),vals,"\\),\\("); \
-                         records[tbl] += n; } \
-        END { for (tbl in records) print tbl, records[tbl]; }' |
-      $SED 's/mythlog [0-9]*/mythlog 0/' |
-      $SORT >$SAVED_TABLES
-    has_records "$SAVED_TABLES" "DB dump" || return 1
-
-    echo "Generating a list of tables and record counts in the live DB..."
-    for tbl in $(mysql_cmd "show tables") ; do
-        mysql_cmd "select '$tbl', count(*) from $tbl"
-    done |
-      $TR -s '\t' ' ' |
-      $SED 's/mythlog [0-9]*/mythlog 0/' |
-      $SORT >$LIVE_TABLES
-    has_records "$LIVE_TABLES" "live DB" || return 1
-
-    echo "Comparing live versus saved tables..."
-    case $0 in
-    *restore) # database must include everything from the backup
-        subset $SAVED_TABLES $LIVE_TABLES
-        ;;
-    *)        # backup must exactly match the database
-        $DIFF $LIVE_TABLES $SAVED_TABLES
-        ;;
-    esac
-    TABLE_STATUS=$?
-    $RM $LIVE_TABLES $SAVED_TABLES
-    if [ $TABLE_STATUS -eq 0 ] ; then
-        echo "Live and saved table lists match."
-    else
-        echo "Warning, table lists are not identical!"
-    fi
-    return $TABLE_STATUS
-}
-
-check_files_and_tables () {
-    STATUS=0
-    echo
-    check_files "$@" || STATUS=1
-    echo
-    check_tables || STATUS=1
-    echo
-    return $STATUS
-}
-
-stop_mysqld () { $SV stop mysql ; }
-start_mysqld () {
-    $SV start mysql
-    for t in 1 2 4 8 ; do
-        ready=$(mysql_cmd 'select 1 from dual' 2>/dev/null)
-        [ "$ready" = "1" ] && break
-        sleep "$t"
-    done
-    [ "$ready" != "1" ] && echo "Error, DB not available after 15 seconds!"
-}
-
-stop_mythbackend () { $SV stop mythbackend ; }
-start_mythbackend () { $SV start mythbackend ; }
-
-lock_myth () { $MYTHSHUTDOWN --lock ; }
-unlock_myth () { $MYTHSHUTDOWN --unlock ; }
-
-true # Make sure that this shows success
diff --git a/abs/core-testing/LinHES-system/bin/checkbackup b/abs/core-testing/LinHES-system/bin/checkbackup
deleted file mode 100755
index b6d8587..0000000
--- a/abs/core-testing/LinHES-system/bin/checkbackup
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-
-#----------------------------------------------------------------------------
-. /usr/LH/bin/backupcommon || {
-    echo 1>&2 "Can not load common settings!"
-    exit 1
-}
-#----------------------------------------------------------------------------
-
-if check_files_and_tables $BACKUP_LIST  ; then
-    echo "Backup passes all checks."
-    exit 0
-else
-    echo "The backup is bad or already out of date!"
-    exit 1
-fi
diff --git a/abs/core-testing/LinHES-system/bin/checkrestore b/abs/core-testing/LinHES-system/bin/checkrestore
deleted file mode 100755
index ef0360c..0000000
--- a/abs/core-testing/LinHES-system/bin/checkrestore
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-
-#----------------------------------------------------------------------------
-. /usr/LH/bin/backupcommon || {
-    echo 1>&2 "Can not load common settings!"
-    exit 1
-}
-#----------------------------------------------------------------------------
-
-if check_files_and_tables $RESTORE_LIST ; then
-    echo "Restore passes all checks."
-    exit 0
-else
-    echo "The restore failed or was already modified!"
-    exit 1
-fi
diff --git a/abs/core-testing/LinHES-system/bin/library.sh b/abs/core-testing/LinHES-system/bin/library.sh
deleted file mode 100755
index 2049de3..0000000
--- a/abs/core-testing/LinHES-system/bin/library.sh
+++ /dev/null
@@ -1,164 +0,0 @@
-msg () {  # A status reporting function
-    [ "${VERBOSE:-0}" -gt 0 ] && echo "$*"
-}
-
-error () { # An error reporting function
-    echo 1>&2 "$*"
-}
-
-fatal () { # Report an error and exit with a failure code
-    error "$*"
-    exit 1
-}
-
-# The only non builtin this uses is tr...
-require () { # Check prerequisites
-    e=0
-    props="$1" ; shift
-    for obj in "$@" ; do
-        [ -z "$obj" ] && continue # Too late to do anything itelligent...
-        problems=""
-        for prop in $(/bin/tr '+,' ' ' <<<"$props") ; do
-            case "$prop" in
-            e|exists) # kind of useless...
-                [ -e "$obj" ] || problems="$problems, does not exist" ;;
-            f|file)
-                [ -f "$obj" ] || problems="$problems, is not a file" ;;
-            d|dir)
-                [ -d "$obj" ] || problems="$problems, is not a directory" ;;
-            l|symlink)
-                [ -L "$obj" ] || problems="$problems, is not a symlink" ;;
-            nosymlink)
-                [ -L "$obj" ] && problems="$problems, is a symlink" ;;
-            r|readable)
-                [ -r "$obj" ] || problems="$problems, is not readable" ;;
-            w|writable)
-                [ -w "$obj" ] || problems="$problems, is not writable" ;;
-            x|executable)
-                [ -x "$obj" ] || problems="$problems, is not executable" ;;
-            *)
-                fatal "Programmer error, unknown property: '$prop'" ;;
-            esac
-        done
-        if [ -n "$problems" ] ; then
-            error "Error: '$obj'$problems."
-            e=1
-        fi
-    done
-    [ "$e" -ne 0 ] && fatal "Errors noted above are fatal."
-}
-
-require file+r+x /bin/bash /bin/grep /bin/rm /bin/tr \
-                 /usr/bin/basename /usr/bin/env \
-                 /usr/bin/mysql /usr/bin/sort
-
-if [ -n "$DEBUG" ] ; then
-    for debug_opt in $(/bin/tr ',' ' ' <<<"$DEBUG") ; do
-        echo '============================================================'
-        echo "==== $debug_opt"
-
-        # Note that the order you specifiy these debug options in matters.
-        # I recommend always listing log first. For example:
-        #   export DEBUG=log,env,set,trace
-        case "$debug_opt" in
-        env)    /usr/bin/env | /usr/bin/sort ;;
-        set)    set ;;
-        trace)  set -vx ;;
-        log)    logfile="/tmp/$(/usr/bin/basename $0).$$.debug"
-                /bin/rm -f "$logfile" # Try to avoid privilege escalation bugs
-                echo "Redirecting stdout and stderr to '$logfile'"
-                exec >"$logfile" 2>&1 ;;
-        *)      error "Unknown debug option '$debug_opt'" ;;
-        esac
-    done
-    echo '============================================================'
-fi
-
-must_be_root () { # For things which must be run as root
-    [ $(/usr/bin/id -u) -ne 0 ] && fatal "You must run this script as root!"
-}
-
-must_be_mythtv () { # For things which must be run as mythtv (su if possible)
-    case $(/usr/bin/id -nu) in
-    mythtv) ;; # Continue
-    root)   /bin/su - mythtv -c "$0 $*" ; exit $? ;;
-    *)      fatal "You must run this script at mythtv or root!" ;;
-    esac
-}
-
-# Use a variable so you can override it.
-DATABASE="mythconverg"
-
-mysql_cmd () { # Execute SQL from the command line
-    /usr/bin/mysql -u root "$DATABASE" -sBe "$*"
-}
-
-mysql_stdin () { # Execute SQL from stdin
-    /usr/bin/mysql -u root "$DATABASE" -sB
-}
-
-machine_clause () { # Helper function 
-    if [ -z "$1" ] ; then
-        echo "(hostname = '' or hostname is null)"
-    else
-        echo "hostname = '$1'"
-    fi
-}
-
-get_all_setting_names () { # List setting names
-    case "$#" in
-    0) MACHINE_CLAUSE="" ;;
-    1) MACHINE_CLAUSE="where $(machine_clause "$1")" ;;
-    *) fatal "Programmer error, get_all_names must be passed 0 or 1 args, got $#" ;;
-    esac
-    mysql_cmd "select distinct value from settings $MACHINE_CLAUSE order by value"
-}
-
-get_all_setting_values () { # List settings
-    case "$#" in
-    0) MACHINE_CLAUSE="" ;;
-    1) MACHINE_CLAUSE="where $(machine_clause "$1")" ;;
-    *) fatal "Programmer error, get_all_values must be passed 0 or 1 args, got $#" ;;
-    esac
-    mysql_cmd "select value, data, hostname from settings $MACHINE_CLAUSE order by hostname, value, data"
-}
-
-get_setting_value () { # Get the data for a setting (may return multiples!)
-    case "$#" in
-    1) MACHINE_CLAUSE="" ;;
-    2) MACHINE_CLAUSE="and $(machine_clause "$2")" ;;
-    *) fatal "Programmer error, get_value must be passed 1 or 2 args, got $#" ;;
-    esac
-    mysql_cmd "select data from settings where value = '$1' $MACHINE_CLAUSE"
-}
-
-set_setting_value () { # Insert or update aome setting
-    case "$#" in
-    2) RECORD_CNT=$(get_value "$1" | wc -l) ;;
-    3) RECORD_CNT=$(get_value "$1" "$3" | wc -l) ;;
-    *) fatal "Programmer error, set_value must be passed 2 or 3 args, got $#" ;;
-    esac
-    MACHINE_CLAUSE=""
-    if [ "$RECORD_CNT" -eq 0 ] ; then
-        [ -n "$3" ] && MACHINE_CLAUSE=", $(machine_clause "$3")"
-        mysql_cmd "insert into settings set value = '$1', data = '$2' $MACHINE_CLAUSE"
-    else
-        [ "$#" -eq 3 ] && MACHINE_CLAUSE="and $(machine_clause "$3")"
-        mysql_cmd "update settings set data = '$2' where value = '$1' $MACHINE_CLAUSE"
-    fi
-}
-
-delete_setting_value () { # Totally remove some setting
-    case "$#" in
-    1) MACHINE_CLAUSE="" ;;
-    2) MACHINE_CLAUSE="and $(machine_clause "$2")" ;;
-    *) fatal "Programmer error, get_value must be passed 1 or 2 args, got $#" ;;
-    esac
-    mysql_cmd "delete from settings where value = '$1' $MACHINE_CLAUSE"
-}
-
-# Filter against a newline seperated exclude list
-filter_list () {
-    /bin/grep -vxF "$*" |
-    /usr/bin/sort -u
-}
diff --git a/abs/core-testing/LinHES-system/bin/mythbackup b/abs/core-testing/LinHES-system/bin/mythbackup
deleted file mode 100755
index 3b4edd4..0000000
--- a/abs/core-testing/LinHES-system/bin/mythbackup
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/bash
-
-#----------------------------------------------------------------------------
-. /usr/LH/bin/backupcommon || {
-    echo 1>&2 "Can not load common settings!"
-    exit 1
-}
-
-. /etc/osd_cat.cfg || {
-	color=yellow
-	outline=2
-	outlinecolour=black
-	shadow=0
-	shadowcolour=black
-	font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
-}
-#----------------------------------------------------------------------------
-
-# Function to display status onscreen
-osd()
-# Arg_1 = display text Arg_2 = delay time Arg_3 = line num
-{
-    TEXT=$1
-    killall -9 osd_cat
-    if [ $3 -gt 1 ]; then
-        for ((i=2; i <= $3 ; i++))
-        do
-            TEXT="\n"$TEXT
-        done
-    fi
-    printf "$TEXT" | osd_cat --lines=6 --pos=middle --align=center --delay=$2 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font &
-}
-
-# Prevent mythshutdown from shutting down the system in the middle...
-lock_myth
-
-# Play a sound to let you know I'm starting.
-play_sound init.wav
-
-# Keep a chain of recent backups,
-export DISPLAY=:0.0
-osd "Rolling over old backups..." 0 1
-echo "Starting rollover of old backups, this may take a while..."
-[ -f "$BACKUP_SQL" ] && shrink $BACKUP_SQL
-[ -f "$BACKUP_TAR" ] && shrink $BACKUP_TAR
-backup_roller .19 .18 .17 .16 .15 .14 .13 .12 .11 .10 .9 .8 .7 .6 .5 .4 .3 .2 .1 ''
-echo "Rollover completed."
-
-osd "Checking the database..." 0 2
-# Start with the database backup, first we make sure it's healthy, and
-# then we can dump it.
-# Doing this while the backend is active would be BAD.
-stop_mythbackend
-
-# Stop, check, and fix $DATABASE db to ensure clean copy, then restart it.
-stop_mysqld
-cd $DATABASE_DIR
-$MYISAMCHK -f *.MYI
-start_mysqld
-
-osd "Backing up database..." 0 3
-# Dumps the $DATABASE database
-$MYSQLDUMP -v -c -u root $DATABASE > $BACKUP_SQL
-shrink $BACKUP_SQL
-
-osd "Backing up files..." 0 4
-# Now to backup the other files, no fooling around, grab everything in the
-# list because you never know what you'll want, and we can always get clever
-# about what to restore later...
-
-# gather all the things in the list into a nice tidy bundle
-cd /
-$TAR cvf $BACKUP_TAR $BACKUP_LIST 2>&1 |
-    $SED -e '/Error exit delayed from previous errors/d'
-shrink $BACKUP_TAR
-
-# If you can't read this you've got no business restoring from it anyway.
-$CHOWN root:root $BACKUP_TAR* $BACKUP_SQL*
-$CHMOD go-rwx $BACKUP_TAR* $BACKUP_SQL*
-
-osd "Testing backup..." 0 5
-echo "Sanity checking your backup..."
-play_sound testing.wav
-# Play a sound to let you know the outcome.
-if check_files_and_tables $BACKUP_LIST ; then
-    osd "Backup completed successfully." 5 6
-    echo "Backup passes all checks."
-    COMPLETE_MSG="Last backup completed on `date '+%D @ %-I:%M %p'`"
-    play_sound complete.wav
-    STATUS=0
-else
-    osd "Backup FAILED." 5 6
-    echo "The backup is bad or already out of date!"
-    COMPLETE_MSG="Last backup FAILED on `date '+%D @ %-I:%M %p'`"
-    play_sound fail.wav
-    STATUS=1
-fi
-
-# Add Last backup status to menu item
-if grep "<description>" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml >/dev/null 2>&1
-then
-    sed -i "s_\<description\>.*\<description\>_description\>$COMPLETE_MSG\<\/description_" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml
-else
-    sed -i.orig " /NONE/ i\     \<description\>$COMPLETE_MSG\<\/description\>" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml
-fi
-
-# Now we can restart the backend.
-start_mythbackend
-
-# Unlock the system again...
-unlock_myth
-
-exit $STATUS
diff --git a/abs/core-testing/LinHES-system/bin/mythrestore b/abs/core-testing/LinHES-system/bin/mythrestore
deleted file mode 100755
index 447b0b8..0000000
--- a/abs/core-testing/LinHES-system/bin/mythrestore
+++ /dev/null
@@ -1,137 +0,0 @@
-#!/bin/bash
-
-#----------------------------------------------------------------------------
-. /usr/LH/bin/backupcommon || {
-    echo 1>&2 "Can not load common settings!"
-    exit 1
-}
-
-. /etc/osd_cat.cfg || {
-	color=yellow
-	outline=2
-	outlinecolour=black
-	shadow=0
-	shadowcolour=black
-	font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
-}
-#----------------------------------------------------------------------------
-
-# Function to display status onscreen
-osd()
-# Arg_1 = display text Arg_2 = delay time Arg_3 = line num
-{
-    TEXT=$1
-    killall -9 osd_cat
-    if [ $3 -gt 1 ]; then
-        for ((i=2; i <= $3 ; i++))
-        do
-            TEXT="\n"$TEXT
-        done
-    fi
-    printf "$TEXT" | osd_cat --lines=6 --pos=middle --align=center --delay=$2 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font &
-}
-
-do_file_updates() {  # A function because we need to do this in two places
-    echo "Doing any needed file updates..."
-    [ -n "$UPDATE_FILES" -a -f "$UPDATE_FILES" -a -x "$UPDATE_FILES" ] &&
-        "$UPDATE_FILES"
-}
-
-do_db_updates() {
-    # We need to redo this since we just restored the old settings...
-    lock_myth
-    # This is gross, but makes sure that the lock count has a sane value...
-    mysql_cmd "update settings set data = '1' where value = 'MythShutdownLock'"
-
-    # Clean up ambiguous schema version settings...
-    for val in $(mysql_cmd "select distinct value from settings where value like '%SchemaVer'") ; do
-        # Find the numeric maximum version for this schema
-        max_ver=$(mysql_cmd "select max(0 + ifnull(data, 0)) from settings where value = '$val'")
-        # Wipe out all the existing ones
-        mysql_cmd "delete from settings where value = '$val'"
-        # Insert a nice clean unique one.
-        mysql_cmd "insert into settings set value = '$val', data = '$max_ver'"
-    done
-
-    # This table causes problems with mythweb on upgrades...
-    mysql_cmd "update settings set data = '0' where value = 'WebDBSchemaVer'"
-    mysql_cmd "drop table mythweb_sessions" >/dev/null 2>&1
-}
-
-# Let's prevent mythshutdown from shutting down the system.
-lock_myth
-
-# Play a sound to let you know I'm starting.
-play_sound restore.wav
-export DISPLAY=:0.0
-
-# Doing this while the backend is active could be BAD.
-stop_mythbackend
-
-# If the standard backup file exists we try to restore the files based
-# on our restore list.
-if compression=$(compression_type "$BACKUP_TAR") ; then
-    osd "Restoring files..." 0 1
-    echo "Starting the restore of files..."
-    cd /
-    expand -c $BACKUP_TAR$compression |
-        $TAR xpvf - $RESTORE_LIST $EXCLUSION 2>&1 |
-        $SED -e '/Error exit delayed from previous errors/d'
-    echo "Completed the restore of files."
-fi
-
-# If the db backup file exists start the DB restore and upgrade
-if compression=$(compression_type "$BACKUP_SQL") ; then
-    echo "Starting the DB restore, this can take a while..."
-    echo "Clearing out the existing skeleton..."
-    #mysql_stdin < $DROP_SQL
-    osd "Recreating database..." 0 2
-    echo "Recreating the db..."
-    sleep 1
-    $MYSQLADMIN -u root create $DATABASE
-    osd "Restoring database..." 0 3
-    echo "Restoring the data (long)..."
-    expand -c $BACKUP_SQL$compression | mysql_stdin
-    echo "Doing any needed db updates..."
-    [ -n "$UPDATE_SQL" -a -f "$UPDATE_SQL" ] &&
-        mysql_stdin < $UPDATE_SQL
-    echo "Completed the DB restore."
-fi
-
-osd "Testing restore..." 0 4
-echo "Sanity checking your restore..."
-play_sound vr.wav
-# Play a sound to let you know the outcome.
-if check_files_and_tables $RESTORE_LIST ; then
-    osd "Restore completed successfully." 5 5
-    echo "Restore passes all checks."
-    COMPLETE_MSG="Last restore completed on `date '+%D @ %-I:%M %p'`"
-    play_sound restored.wav
-    STATUS=0
-else
-    osd "Restore FAILED." 5 5
-    echo "The restore failed or was already modified!"
-    COMPLETE_MSG="Last restore FAILED on `date '+%D @ %-I:%M %p'`"
-    play_sound rf.wav
-    STATUS=1
-fi
-
-# Add Last restore status to menu item
-if grep "<description>" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml >/dev/null 2>&1
-then
-    sed -i "s_\<description\>.*\<description\>_description\>$COMPLETE_MSG\<\/description_" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml
-else
-    sed -i.orig " /NONE/ i\     \<description\>$COMPLETE_MSG\<\/description\>" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml
-fi
-
-# Make any updates _after_ we verify the backup...
-do_db_updates
-do_file_updates
-
-#post restore fixup for sshd
-/usr/MythVantage/bin/systemconfig.py -m user
-
-# Now it's more or less safe to restart the backend.
-start_mythbackend
-
-exit $STATUS
diff --git a/abs/core-testing/LinHES-system/bin/rollback.sh b/abs/core-testing/LinHES-system/bin/rollback.sh
deleted file mode 100755
index 12897da..0000000
--- a/abs/core-testing/LinHES-system/bin/rollback.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-#----------------------------------------------------------------------------
-. /usr/LH/bin/backupcommon || {
-    echo 1>&2 "Can not load common settings!"
-    exit 1
-}
-#----------------------------------------------------------------------------
-
-require file+r+x $MYTHSHUTDOWN
-
-# Prevent mythshutdown from shutting down the system in the middle...
-lock_myth
-
-echo "Starting rollback of old backups"
-backup_roller '' .1 .2 .3 .4 .5 .6 .7 .8 .9 .10 .11 .12 .13 .14 .15 .16 .17 .18 .19
-echo "Rollback completed."
-
-# Unlock the system again...
-unlock_myth
diff --git a/abs/core-testing/LinHES-system/firstboot.sh b/abs/core-testing/LinHES-system/firstboot.sh
deleted file mode 100755
index 7e2f603..0000000
--- a/abs/core-testing/LinHES-system/firstboot.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/bash
-. ~/.configured
-ATTEMPT=0
-
-function try_smolt {
-        ((ATTEMPT=ATTEMPT+1))
-        WID=`xdotool search "mythfrontend" | head -1`
-        xdotool windowfocus $WID
-        status=$?
-        if [ $status = 0 ]
-        then
-                sleep 2
-                xdotool key "ctrl+alt+p"
-                xdotool key "ctrl+alt+p"
-                fb_status=0
-                echo "FB=NO" > ~/.configured
-        fi
-
-        if [ $ATTEMPT = 200 ]
-        then
-                fb_status=0
-        fi
-
-}
-
-
-if [ ! -e /tmp/debug ]
-then
-	if [ ! -e /tmp/nomfe ]
-	then
-		if [ ! -e ~/.mythtv/pub-uuid ]
-		then
-			if [ x$FB != xNO ]
-			then
-				fb_status=4
-				while [ $fb_status != 0 ]
-				do
-					try_smolt
-					if [ $fb_status != 0  ]
-					then
-						sleep 1
-					fi
-				done
-			fi
-		fi
-	fi
-fi
-
-
-
diff --git a/abs/core-testing/LinHES-system/load-modules-mythvantage.sh b/abs/core-testing/LinHES-system/load-modules-mythvantage.sh
deleted file mode 100755
index 06c8a96..0000000
--- a/abs/core-testing/LinHES-system/load-modules-mythvantage.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/bash
-#/usr/bin/load-modules-mythvantage.sh  UNLOAD LCD
-export TERM=linux
-. /etc/rc.conf
-. /etc/rc.d/functions
-. /etc/systemconfig
-case $1 in
-UNLOAD|unload )
-            MODULELIST=`grep /etc/modules.mythvantage $2`
-            for i in $MODULELIST
-            do
-                /sbin/rmmod $i
-            done
-
-            ;;
-
-   *)   printhl "    Loading MythVantage-modules"
-        #try to load the cx88 modules
-        if [ ! x$SystemType = xFrontend_only ]
-        then
-            /sbin/modprobe cx88-dvb 2>/dev/null
-        fi
-
-        if [ -f /etc/modules.mythvantage ]
-        then
-           while read line
-           do
-                module=`echo $line |cut -d# -f1`
-                #this doesn't do anything on boot cause ttySX does not yet exisit
-                if [ x$module = xlirc_serial ]
-                then
-                    if [ x$ReceiverType = xSerial ]
-                    then
-                        case $ReceiverSerialport in
-                            ttyS0) FLAGS="io=0x3f8  irq=4";;
-                            ttyS1) FLAGS="io=0x2f8  irq=3" ;;
-                            ttyS2) FLAGS="io=0x3e8  irq=4" ;;
-                            ttyS3) FLAGS="io=0x2f8  irq=3" ;;
-                        esac
-                        /usr/bin/setserial /dev/$ReceiverSerialport uart none 2>/dev/null
-			 if [ $? = 0 ]
-			 then
-                   	      /sbin/modprobe lirc_serial $FLAGS 2>/dev/nulla
-          		 fi
-		    elif [ x$HostBlasterType = xSerial ]
-		    then
-                         case $HostSerialPort_blasterlirc in
-                               ttyS0) FLAGS="io=0x3f8  irq=4";;
-                               ttyS1) FLAGS="io=0x2f8  irq=3" ;;
-                               ttyS2) FLAGS="io=0x3e8  irq=4" ;;
-                               ttyS3) FLAGS="io=0x2f8  irq=3" ;;
-                         esac
-                         /usr/bin/setserial /dev/$HostSerialPort_blasterlirc uart none 2>/dev/null
-			 if [ $? = 0 ]
-			 then
-                   	      /sbin/modprobe lirc_serial $FLAGS 2>/dev/nulla
-          		 fi
-                    fi
-                fi
-                /sbin/modprobe $module 2> /dev/null
-           done < /etc/modules.mythvantage
-        fi
-esac
-
diff --git a/abs/core-testing/LinHES-system/myth_mtc.lr b/abs/core-testing/LinHES-system/myth_mtc.lr
deleted file mode 100644
index 23f8711..0000000
--- a/abs/core-testing/LinHES-system/myth_mtc.lr
+++ /dev/null
@@ -1,9 +0,0 @@
-/var/log/mythtv/myth_mtc.log {
-	copytruncate
-	daily
-	size 10M
-	missingok
-	rotate 7
-	compress
-	notifempty
-}
diff --git a/abs/core-testing/LinHES-system/myth_mtc.py b/abs/core-testing/LinHES-system/myth_mtc.py
deleted file mode 100755
index 5505b0a..0000000
--- a/abs/core-testing/LinHES-system/myth_mtc.py
+++ /dev/null
@@ -1,139 +0,0 @@
-#!/usr/bin/python
-
-
-import sys,popen2
-import optparse
-import re
-import socket
-import os
-import datetime,time
-
-
-
-try:
-    from MythTV import MythTV
-    mythtv = MythTV()
-except:
-    mythtv = None
-
-#print mythtv.db.getSetting( 'Theme', socket.gethostname())
-
-def optimize():
-    cursor = mythtv.db.cursor()
-    cursor.execute("SHOW tables")
-    result = cursor.fetchall()
-    ops=["REPAIR","OPTIMIZE","ANALYZE"]
-    for row in result:
-        ctable=row[0]
-        for op in ops:
-            print op,ctable
-            cmd= "%s  table %s" %(op,ctable)
-            cursor.execute(cmd)
-
-
-def upcoming_check():
-    upcoming = mythtv.getUpcomingRecordings()
-    try:
-        show=str(upcoming[0])
-        show=show.strip()
-        showtime=show.partition("(")[2].strip(")")
-        now=time.time()
-        rec_time=time.strptime( showtime ,"%Y-%m-%d %H:%M:%S" )
-        r=time.mktime(rec_time)
-        time_diff= ( r - now ) / 60
-    except:
-        time_diff=100
-        show="No show"
-    if ( time_diff  >  30) :
-        return True
-    else:
-        print show , "is upcoming in " , time_diff
-        return False
-
-
-def schemalock_check():
-    c = mythtv.db.cursor()
-    c.execute("select count(*) from schemalock")
-    results=c.fetchone()
-    schemalock=results[0]
-    if schemalock == 0:
-        return True
-    else:
-        print "schema is locked"
-        return False
-
-def job_check():
-    c = mythtv.db.cursor()
-    c.execute("select count(*) from jobqueue where status = 4")
-    results=c.fetchone()
-    jobs= results[0]
-    if jobs == 0 :
-        return True
-    else:
-        print " jobs are running"
-        return False
-
-
-def in_use():
-    c = mythtv.db.cursor()
-    c.execute("select count(*) from inuseprograms")
-    results=c.fetchone()
-    prginuse=results[0]
-    if prginuse == 0 :
-        return True
-    else:
-        print "programs in use"
-        return False
-
-def mfd_check():
-    ismfd=popen2.Popen3('/bin/ps cax|/bin/grep -v grep |/bin/grep mythfilldatabase')
-    ismfd.wait()
-    mfdIdle=ismfd.poll()
-    if mfdIdle == 0:
-        print "mythfilldatabase is running"
-        return False
-    else:
-        return True
-
-
-
-def idle_check():
-    if  (   upcoming_check() and schemalock_check() and job_check()  and in_use() and  mfd_check()  ):
-        idle=True
-        print "Myth is idle"
-    else:
-        idle=False
-        print "Myth is NOT idle"
-    return idle
-
-def run_stuff():
-    if idle_check():
-	print "Running optimize"
-        optimize()
-
-	print "Running backup"
-        os.system('/usr/LH/bin/backup_job')
-
-	print "Running system_update"
-        os.system('/usr/LH/bin/update_system')
-        continue_loop=False
-    else:
-        continue_loop=True
-    return continue_loop
-
-#---------------------------------
-starttime=time.time()
-ctin=True
-while ctin:
-    ctin=run_stuff()
-    if  ctin:
-        time.sleep(600)
-    current_time=time.time()
-    if (current_time - starttime) > 10800 :
-        ctin = False
-        print "time exceeded (3 hours)"
-        exit(1)
-
-
-
-
diff --git a/abs/core-testing/LinHES-system/myth_mtc.sh b/abs/core-testing/LinHES-system/myth_mtc.sh
deleted file mode 100755
index 487513b..0000000
--- a/abs/core-testing/LinHES-system/myth_mtc.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/bash
-. /etc/profile
-logFile='/var/log/mythtv/myth_mtc.log'
-date=`date +%Y-%m-%d`
-
-myth_mtc.py > $logFile 2>&1
-if [ $? = 0 ]
-then
-    echo "Finished $date" >> $logFile
-else
-    echo "Time Exceede $date" >> $logFile
-fi
diff --git a/abs/core-testing/LinHES-system/mythfrontend-start b/abs/core-testing/LinHES-system/mythfrontend-start
deleted file mode 100755
index c92d024..0000000
--- a/abs/core-testing/LinHES-system/mythfrontend-start
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/bash
-PIDS=$(pidof mythfrontend)
-P_array=( $PIDS )
-let "instances = ${#P_array[*]}"  # Count elements.
-
-if [ $instances -gt 0 ];
-then
-    if [ $instances -eq 1 ]; then
-        diagtext="is already a MythFrontend"
-    else
-        diagtext="are already $instances MythFrontends"
-    fi
-
-    question="There $diagtext running. Do you really want to start another one?"  
-    mythvantage -q "${question}"
-    if [ $?  = 16 ] 
-    then
-        mythfrontend --logfile /var/log/mythtv/mythfrontend.log
-    fi
-else
-    mythfrontend --logfile /var/log/mythtv/mythfrontend.log
-fi
diff --git a/abs/core-testing/LinHES-system/optimize_mythdb.py b/abs/core-testing/LinHES-system/optimize_mythdb.py
deleted file mode 100755
index e7b35ed..0000000
--- a/abs/core-testing/LinHES-system/optimize_mythdb.py
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/usr/bin/python
-# import MySQL module
-import MySQLdb
-import socket
-import sys
-db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg")
-cursor = db.cursor()
-cursor.execute("SHOW tables")
-result = cursor.fetchall()
-ops=["REPAIR","OPTIMIZE","ANALYZE"]
-for row in result:
-    ctable=row[0]
-    for op in ops:
-        print op,ctable
-        cmd= "%s  table %s" %(op,ctable)
-        cursor.execute(cmd)
diff --git a/abs/core-testing/LinHES-system/smolt.cron b/abs/core-testing/LinHES-system/smolt.cron
deleted file mode 100644
index f418df1..0000000
--- a/abs/core-testing/LinHES-system/smolt.cron
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-. /etc/profile
-if  [ -f  /home/mythtv/.mythtv/MythSmolt/hw-uuid ] 
-then
-	cd /usr/share/mythtv/mythsmolt/scripts
-	touch /var/log/smolt.update
-	chown mythtv /var/log/smolt.update
-	random=$((RANDOM%2000))
-	sleep $random
-	su mythtv -c "./sendProfile.py -a" > /var/log/smolt.update
-fi
diff --git a/abs/core-testing/LinHES-system/tvterm.sh b/abs/core-testing/LinHES-system/tvterm.sh
deleted file mode 100755
index dfd116b..0000000
--- a/abs/core-testing/LinHES-system/tvterm.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-#
-# Create a terminal with a font that mostly fills the width of the screen.
-
-width=$(echo $(xdpyinfo | grep dimensions:) | cut -d' ' -f2 | cut -dx -f1)
-
-if [ -z "$width" ] ; then
-  width=1024
-fi
-
-if [ $width -ge 1920 ] ; then
-  fontsize=24
-elif [ $width -ge 1440 ] ; then
-  fontsize=21
-elif [ $width -ge 1280 ] ; then
-  fontsize=18
-elif [ $width -ge 1024 ] ; then
-  fontsize=14
-elif [ $width -ge 800 ] ; then
-  fontsize=11
-elif [ $width -ge 640 ] ; then
-  fontsize=8
-fi
-
-xterm -fa 'DejaVu Sans Mono' -fs $fontsize
diff --git a/abs/core-testing/LinHES-system/unclutter-toggle.sh b/abs/core-testing/LinHES-system/unclutter-toggle.sh
deleted file mode 100644
index aadce50..0000000
--- a/abs/core-testing/LinHES-system/unclutter-toggle.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-PIDUNC=`pidof unclutter`
-jitter=200
-idle=1
-. /etc/unclutter.cfg
-if [ -n "${PIDUNC}" ];
-then
-    killall -9 unclutter
-else
-    /usr/X11R6/bin/unclutter -root -idle $idle -jitter $jitter -noevents &
-fi