initial import

85 files changed, 14166 insertions, 0 deletions

diff --git a/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
new file mode 100644
index 0000000..d49fbf6
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+# 
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+#   Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=shuttleVFD
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as.  LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+#            specific setup! Otherwise LCDd won't be able to find
+#            the driver modules and will thus not be able to
+#            function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order  ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then 
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50			# Brightness (in %) if applicable
+Contrast=50			# Contrast (in %) if applicable
+Backlight=no			# Backlight if applicable
+UpsideDown=no			# flip image upside down
+Invert=no			# invert light/dark pixels
+ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
+				# border whithin the usable text area,
+				# for setting up TextResolution and
+				# MinFontFaceSize (if using FT2);
+ShowBigBorder=no		# border around the unused area
+ShowThinBorder=yes		# border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+#   KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+#   KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname      Function
+#              Normal context              Menu context
+# -------      --------------              ------------
+# PauseKey     Pause/Continue              Enter/select
+# BackKey      Back(Go to previous screen) Up/Left
+# ForwardKey   Forward(Go to next screen)  Down/Right
+# MainMenuKey  Open main menu              Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+#       as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+#       is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's.  ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf
new file mode 100644
index 0000000..2596c25
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+# 
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+#   Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=imon
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as.  LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+#            specific setup! Otherwise LCDd won't be able to find
+#            the driver modules and will thus not be able to
+#            function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order  ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then 
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50			# Brightness (in %) if applicable
+Contrast=50			# Contrast (in %) if applicable
+Backlight=no			# Backlight if applicable
+UpsideDown=no			# flip image upside down
+Invert=no			# invert light/dark pixels
+ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
+				# border whithin the usable text area,
+				# for setting up TextResolution and
+				# MinFontFaceSize (if using FT2);
+ShowBigBorder=no		# border around the unused area
+ShowThinBorder=yes		# border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+#   KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+#   KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname      Function
+#              Normal context              Menu context
+# -------      --------------              ------------
+# PauseKey     Pause/Continue              Enter/select
+# BackKey      Back(Go to previous screen) Up/Left
+# ForwardKey   Forward(Go to next screen)  Down/Right
+# MainMenuKey  Open main menu              Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+#       as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+#       is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's.  ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/modules b/abs/core-testing/live-installer/templates/LCD/Silverstone/modules
new file mode 100644
index 0000000..cd576c3
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/Silverstone/modules
@@ -0,0 +1 @@
+lirc_imon	#LCD
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf
new file mode 100644
index 0000000..2596c25
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+# 
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+#   Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=imon
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as.  LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+#            specific setup! Otherwise LCDd won't be able to find
+#            the driver modules and will thus not be able to
+#            function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order  ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then 
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50			# Brightness (in %) if applicable
+Contrast=50			# Contrast (in %) if applicable
+Backlight=no			# Backlight if applicable
+UpsideDown=no			# flip image upside down
+Invert=no			# invert light/dark pixels
+ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
+				# border whithin the usable text area,
+				# for setting up TextResolution and
+				# MinFontFaceSize (if using FT2);
+ShowBigBorder=no		# border around the unused area
+ShowThinBorder=yes		# border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+#   KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+#   KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname      Function
+#              Normal context              Menu context
+# -------      --------------              ------------
+# PauseKey     Pause/Continue              Enter/select
+# BackKey      Back(Go to previous screen) Up/Left
+# ForwardKey   Forward(Go to next screen)  Down/Right
+# MainMenuKey  Open main menu              Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+#       as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+#       is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's.  ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf
new file mode 100644
index 0000000..ce64936
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf
@@ -0,0 +1,38 @@
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.8.1(default) on Thu Sep  6 09:06:50 2007
+#
+# contributed by 
+#
+# brand:                       /tmp/out
+# model no. of remote control: 
+# devices being controlled by this remote:
+#
+
+begin remote
+
+  name  Antec_fusion_silver_v1
+  bits           16
+  eps            30
+  aeps          100
+
+  one             0     0
+  zero            0     0
+  post_data_bits  16
+  post_data      0xFF
+  gap          131985
+  min_repeat      6
+  toggle_bit      0
+
+
+      begin codes
+          CW                       0x0001
+          CCW                      0x0100
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc
new file mode 100644
index 0000000..7a39704
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc
@@ -0,0 +1,15 @@
+begin
+  remote =   Antec_fusion_silver_v1
+  prog = mythtv
+  button = CW
+  repeat = 1
+  config = ]
+end
+ 
+begin
+  remote =   Antec_fusion_silver_v1
+  prog = mythtv
+  button = CCW
+  repeat = 1
+  config = [
+end
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules b/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules
new file mode 100644
index 0000000..cd576c3
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules
@@ -0,0 +1 @@
+lirc_imon	#LCD
diff --git a/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf
new file mode 100644
index 0000000..5b37bd7
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf
@@ -0,0 +1,957 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+# 
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+#   Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, 
+#   EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior,
+#   irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x,
+#   MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
+#   serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=xosd
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as.  LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+#            specific setup! Otherwise LCDd won't be able to find
+#            the driver modules and will thus not be able to
+#            function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# GoodBye message: each entry represents a display line; default: builtin
+#GoodBye="Thanks for using"
+#GoodBye="   LCDproc!"
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order  ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
+[ea65]
+
+# Device is fixed /dev/ttyS1
+# Width and Height are fixed 9x1
+
+# As the VFD is self luminescent we don't have a backlight
+# But we can use the backlight functions to control the front LEDs
+# Brightness 0 to 299 -> LEDs off
+# Brightness 300 to 699 -> LEDs half bright
+# Brightness 700 to 1000 -> LEDs full bright
+Brightness=500
+# OffBrightness is the the value used for the 'backlight off' state
+OffBrightness=0
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then 
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+## optional:
+Brightness=50                   # Brightness (in %) if applicable
+Contrast=50                     # Contrast (in %) if applicable
+Backlight=no                    # Backlight if applicable
+UpsideDown=no                   # flip image upside down
+Invert=no                       # invert light/dark pixels
+ShowDebugFrame=no               # turns on/off 1 pixel thick debugging
+                                # border whithin the usable text area,
+                                # for setting up TextResolution and
+                                # MinFontFaceSize (if using FT2);
+ShowBigBorder=no                # border around the unused area
+ShowThinBorder=yes              # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
+# is still alive. When set to a value bigger then null the character in the
+# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
+#KeepAliveDisplay=0
+
+# If you experience occasional garbage on your display you can use this
+# option as workaround. If set to a value bigger than null it forces a
+# full screen refresh <RefreshDiplay> seconds. Default: 0.
+#RefreshDisplay=5
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+#   KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+#   KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname      Function
+#              Normal context              Menu context
+# -------      --------------              ------------
+# PauseKey     Pause/Continue              Enter/select
+# BackKey      Back(Go to previous screen) Up/Left
+# ForwardKey   Forward(Go to next screen)  Down/Right
+# MainMenuKey  Open main menu              Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+#       is a vfd or vkd as they don't have this feature
+Contrast=480
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# The following table translates from MtxOrb key letters to logical key names.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Mini-box.com picoLCD (usblcd) driver ##
+[picolcd]
+# This is for the Mini-Box.com usblcd device that ships with the M300.  It can 
+# also be purchased separately but this driver has only been tested on the M300 
+# setup.
+
+# KeyTimeout is the time that LCDd spends waiting for a key press before cycling 
+# through other duties.  Higher values make LCDd use less CPU time and make 
+# key presses more detectable.  Lower values make LCDd more responsive but a 
+# little prone to missing key presses.  500 (.5 second) is the default and a
+# balanced value.
+KeyTimeout=500
+
+# Contrast: [default: 1000; legal: 0 - 1000]
+Contrast=1000
+
+# Light the keys? i[default: on; legal: on, off]
+Keylights=on
+
+# If Keylights is on, the you can unlight specific keys below:
+# Key0 is the directional pad.  Key1 - Key5 correspond to the F1 - F5 keys.  
+# There is no LED for the +/- keys.  This is a handy way to indicate to users 
+# which keys are disabled.  [default: on; legal: on, off]
+Key0Light=on
+Key1Light=on
+Key2Light=on
+Key3Light=on
+Key4Light=on
+Key5Light=on
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
+# Note: Currently only tested with G321D & SP14Q002.
+Type=G321D
+
+# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
+CellSize=6x10
+
+# Select what type of connection [legal: classic, bitshaker; default: classic]
+ConnectionType=classic
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## serial POS display driver ##
+[serialPOS]
+
+# Device to use in serial modea [default: /dev/lcd]
+Device=/dev/lcd
+
+# Specifies the size of the display in characters. [default: 16x2]
+Size=16x2
+
+# Set the communication protocol to use with the POS display.
+# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
+Type=AEDEX
+
+# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
+Speed=9600
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's.  ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use, in XLFD format, as given by "xfontsel"
+Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-*
+
+
+# EOF
diff --git a/abs/core-testing/live-installer/templates/cc.orig.sh b/abs/core-testing/live-installer/templates/cc.orig.sh
new file mode 100755
index 0000000..d8fd2dc
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/cc.orig.sh
@@ -0,0 +1,35 @@
+#!/usr/bin/perl
+# rwraithr added segment for 4 digit channels
+# make sure to set this string to
+# the corresponding remote in /etc/remoted.conf
+#$remote_name = "RC-u43c-1h";
+$remote_name = "$REMOTE_NAME";
+
+sub change_channel {
+        my($channel_digit) = @_;
+        system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit");
+        sleep .5;
+}
+
+$channel=$ARGV[0];
+sleep 1;
+if (length($channel) > 3) {
+        change_channel(substr($channel,0,1));
+        change_channel(substr($channel,1,1));
+        change_channel(substr($channel,2,1));
+        change_channel(substr($channel,3,1));
+} elsif (length($channel) > 2) {
+        change_channel(substr($channel,0,1));
+        change_channel(substr($channel,1,1));
+        change_channel(substr($channel,2,1));
+} elsif (length($channel) > 1) {
+        change_channel(substr($channel,0,1));
+        change_channel(substr($channel,1,1));
+} else {
+        change_channel(substr($channel,0,1));
+}
+system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT");
+
+#system ("sleep 2");
+#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2");
+#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2");
diff --git a/abs/core-testing/live-installer/templates/cc.sh b/abs/core-testing/live-installer/templates/cc.sh
new file mode 100755
index 0000000..0cce308
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/cc.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+/usr/local/bin/cc.orig.sh $@  &
+/usr/local/bin/cc_vol.sh &
+
+
diff --git a/abs/core-testing/live-installer/templates/cc_vol.sh b/abs/core-testing/live-installer/templates/cc_vol.sh
new file mode 100755
index 0000000..819008d
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/cc_vol.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+sleep 2
+/usr/local/bin/ivtvctl -p 2 -d /dev/video2
+/usr/local/bin/ivtvctl -p 1 -d /dev/video2
+
diff --git a/abs/core-testing/live-installer/templates/change_chan.sh b/abs/core-testing/live-installer/templates/change_chan.sh
new file mode 100755
index 0000000..5ad8765
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/change_chan.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+REMOTE_NAME=SA3250
+cmd="$1"
+
+case $cmd in
+	    [0-9]*)
+	        for digit in $(echo $1 | sed -e 's/./& /g'); do 
+		        irsend SEND_ONCE $REMOTE_NAME $digit
+		        sleep  0.3
+	        # If things work OK with sleep 1, try this for faster channel changes:
+	        # sleep 0.3
+	    done
+	        ;;
+
+	   *)
+	           irsend SEND_ONCE $REMOTE_NAME $cmd
+									            ;;
+    esac
+#    /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/live-installer/templates/cron.template b/abs/core-testing/live-installer/templates/cron.template
new file mode 100644
index 0000000..3fcea10
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/cron.template
@@ -0,0 +1,4 @@
+# <minute> <hour> <day> <month> <dow> <command>
+
+
+00 HOUR * * *  /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address
new file mode 100644
index 0000000..1df28d2
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address
@@ -0,0 +1,2 @@
+192.168.1.158/24
+
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route
new file mode 100644
index 0000000..373a4d1
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route
@@ -0,0 +1,2 @@
+default via 192.168.1.1 
+
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig b/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig
new file mode 100644
index 0000000..b1f14e0
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig
@@ -0,0 +1,2 @@
+essid home_lan
+#key ababababab
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/options b/abs/core-testing/live-installer/templates/etcnet/eth/options
new file mode 100644
index 0000000..929da58
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/etcnet/eth/options
@@ -0,0 +1,7 @@
+# If you want to change current interface name, edit /etc/net/iftab,
+# rename current directory and uncomment this line:
+TYPE=eth
+DISABLED=no
+BOOTPROTO=dhcp
+ONBOOT=yes
+CONFIG_WIRELESS=no
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-4 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-4
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/evrouter/MythVantage-4
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-8 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-8
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/evrouter/MythVantage-8
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full b/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac
new file mode 100644
index 0000000..0e3a708
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac
@@ -0,0 +1,3 @@
+"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" 
+"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject"
+
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid
new file mode 100644
index 0000000..7cb2e34
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid
@@ -0,0 +1,3 @@
+"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" 
+"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject"
+
diff --git a/abs/core-testing/live-installer/templates/exports.template b/abs/core-testing/live-installer/templates/exports.template
new file mode 100644
index 0000000..b946287
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/exports.template
@@ -0,0 +1,8 @@
+# /etc/exports
+#
+# See exports(5) for a description.
+
+# use exportfs -arv to reread
+/data/media    REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
+/data/var/cache    REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
+
diff --git a/abs/core-testing/live-installer/templates/fstab.conf.template b/abs/core-testing/live-installer/templates/fstab.conf.template
new file mode 100755
index 0000000..d27bcd9
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/fstab.conf.template
@@ -0,0 +1,16 @@
+# 
+# /etc/fstab: static file system information
+#
+# <file system>        <dir>         <type>    <options>          <dump> <pass>
+none                   /dev/pts      devpts    defaults            0      0
+none                   /dev/shm      tmpfs     defaults            0      0
+
+/dev/cdrom             /mnt/cd   iso9660   ro,user,noauto,unhide   0      0
+/dev/dvd               /mnt/dvd  udf       ro,user,noauto,unhide   0      0
+/dev/fd0               /mnt/fl   vfat      user,noauto             0      0
+
+/dev/sda1 / reiserfs defaults 0 1
+/dev/sda2 swap swap defaults 0 0
+/dev/sda3 /data reiserfs defaults 0 0
+192.168.1.6:/media  /data/media nfs
+
diff --git a/abs/core-testing/live-installer/templates/mysql.service b/abs/core-testing/live-installer/templates/mysql.service
new file mode 100644
index 0000000..160450e
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/mysql.service
@@ -0,0 +1,13 @@
+<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
+<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
+
+<service-group>
+
+  <name replace-wildcards="yes">mysql_myth on %h</name>
+
+  <service>
+    <type>_mysql._tcp</type>
+    <port>3306</port>
+  </service>
+
+</service-group>
diff --git a/abs/core-testing/live-installer/templates/mysql.txt b/abs/core-testing/live-installer/templates/mysql.txt
new file mode 100755
index 0000000..04531b5
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/mysql.txt
@@ -0,0 +1,29 @@
+DBHostName=127.0.0.1
+DBUserName=mythtv
+DBPassword=mythtv
+DBName=mythconverg
+DBType=QMYSQL3
+
+# Set the following if you want to use something other than the
+# machine's real hostname for identifying settings in the database.
+# This is useful if your hostname changes often, as otherwise
+# you'll need to reconfigure mythtv (or futz with the DB) every time.
+# TWO HOSTS MUST NOT USE THE SAME VALUE
+#
+#LocalHostName=my-unique-identifier-goes-here
+
+# If you want your frontend to be able to wake your MySQL server
+# using WakeOnLan, have a look at the following settings:
+#
+# Set the time the frontend waits (in seconds) between reconnect tries.
+# This should be the rough time your MySQL server needs for startup
+#WOLsqlReconnectWaitTime=0
+#
+#
+# This is the amount of retries to wake the MySQL server until the frontend
+# gives up
+#WOLsqlConnectRetry=5
+#
+#
+# This is the command executed to wake your MySQL server.
+#WOLsqlCommand=echo 'WOLsqlServerCommand not set'
diff --git a/abs/core-testing/live-installer/templates/ncid.conf.template b/abs/core-testing/live-installer/templates/ncid.conf.template
new file mode 100755
index 0000000..43ef490
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/ncid.conf.template
@@ -0,0 +1,51 @@
+# tcl/tk configuration file
+
+# Directory NCID uses to find the helper scripts
+set ProgDir     /usr/share/ncid
+
+# default helper script
+set EXTPROG     ncid-osd
+
+# Set Host to the NCID server address
+# Host defaults to 127.0.0.1
+#set Host        127.0.0.1
+set Host        192.168.1.5
+
+# The NCID port default is 3333
+set Port        3333
+
+# If the connection to the server is lost,
+# try every Delay seconds to reconnect
+# The Default: 60
+set Delay       20
+
+# If set to 1, display raw data received from the NCID server
+# If set to 0, do not display raw data received from the NCID server
+# Default: 0
+set Raw         0
+
+# If set to 1, output: date time number name
+# If set to 0, output: name number
+# Default: 0
+set All         1
+
+# If set to 1, display formatted CID, and CID log file on connect
+# If set to 0, ddo not isplay formatted CID, and CID log file on connect
+# Default: 0
+set Verbose     0
+
+# If set to 1, display information in terminal progran or external program
+# If set to 0, display information using a GUI
+# Default: 0
+set NoGUI       1
+
+# output name and number to external program
+# Default: 0
+set Callprog    1
+
+# ring number to call external program
+# Default: 0
+set CallOnRing  0
+
+# external called program
+set Program     [list $ProgDir/$EXTPROG]
diff --git a/abs/core-testing/live-installer/templates/ncidd.conf.template b/abs/core-testing/live-installer/templates/ncidd.conf.template
new file mode 100644
index 0000000..daa2e79
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/ncidd.conf.template
@@ -0,0 +1,143 @@
+# ncid - Network CallerID Server Config File
+
+################################
+# Definitions and Line formats #
+################################
+
+# lines can be blank, or start with the words: send, set #
+#
+# A line is divided into words, separated by spaces
+#
+# A word is either a string of non-blank characters, everything
+# between double quotes, or an equal sign.
+#
+# SEND LINE FORMAT:
+#   send DATATYPE [DATATYPE] ...
+#        where DATATYPE = cidlog, cidinfo
+#
+# SET LINE FORMAT:
+#   set ITEM = VALUE [ITEM = VALUE] ...
+#       where ITEM = cidalias, cidlog, datalog, initcid, initstr,
+#                    lockfile, port, ttyclocal, ttyport, ttyspeed,
+#                    nomodem
+
+############################
+# Log and Info for Clients #
+############################
+
+# Send the call log to a client when connected
+# The default is not to send the call log file
+send cidlog
+
+# Send call info (LINE and RING) to a client at each ring
+# The default is not to send the call info line
+send cidinfo
+
+############################
+# NCID Communications Port #
+############################
+
+# The default TCP/IP port is 3333
+ set port = 3333
+
+#######################
+# Alias and Log Files #
+#######################
+
+# The default CID alias file: /etc/ncid/ncidd.alias
+# set cidalias = /etc/ncid/ncidd.alias
+
+# The default CID call log file: /var/log/cidcall.log
+# the log file must exist, ncidd will not create it
+# (also make the change in /etc/logrotate.d/ncidd
+#  and also /etc/ncid/ncidrotate.conf)
+# set cidlog = /var/log/cidcall.log
+
+# The default tty data log file: /var/log/ciddata.log
+# the log file must exist, ncidd will not create it
+#  (also make the change in /etc/logrotate.d/ncidd
+#   and also /etc/ncid/ncidrotate.conf)
+# set datalog = /var/log/ciddata.log
+
+#####################
+# TTY Configuration #
+#####################
+
+# The default tty port: /dev/modem
+# set ttyport = /dev/cu.modem # Macintosh OS X
+ set ttyport = /dev/ttyS1
+
+# The default tty port speed: 19200
+# The tty speed can be one of: 38400, 19200, 9600, 4800
+# set ttyspeed = 4800 # NetCallerID port speed
+
+# Ignore tty control signals for internal modems and 3 wire serial cables
+#   Disable tty control signals: ttyclocal = 1
+#   Enable tty control signals: ttyclocal = 0 (default)
+# set ttyclocal = 1
+
+# The lockfile name is generated automatically
+# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem
+# set lockfile = /var/lock/LCK..ttyS0
+
+#####################
+# Modem or No Modem #
+#####################
+
+# Obtain CallerID from a CID device or a modem
+#  device: nomodem = 1 (do not send AT commands)
+#  modem: nomodem = 0 (default - send AT commands)
+# set nomodem = 1
+
+########################
+# Modem Initialization #
+########################
+
+# The default modem initialization is: "AT Z S0=0 E1 V1 Q0"
+# set initstr = "ATE1V1Q0"
+#
+# Alternate modem initialization string
+# set initstr = "AT&FE1V1Q0+VIP"
+
+# Addon strings to set modem for Distinctive Ring:
+#   http://www.modemsite.com/56k/dring.asp
+#
+# 3Com/USR/TI chipset: ATS41=1
+#   Reported Ring Codes: RING A, RING B, RING C
+# Rockwell/Conexant chipset: AT-SDR=7
+#   Reported Ring Codes: RING 1, RING 2, RING 3
+# Lucent/Agere chipset: AT+VDR=1,0
+#   Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34
+#
+# Example adds 3Com DR to the default modem initialization
+# set initstr = "ATE1V1Q0S41=1"
+
+# The default for ncidd is to try two CID strings to setup
+# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1".
+# set initcid = "AT#CID=1"
+#
+# Alternate CID strings to try if default does not work:
+# set initcid = "AT+FCLASS=8;+VCID=1"
+# set initcid = "AT-STE=1;+VCID=1"
+# set initcid = "AT-STE=1;#CID=1"
+
+#################
+# TiVo Settings #
+#################
+# set ttyclocal = 1 # TiVo requires CLOCAL
+# set ttyport = /dev/ttyS1 # TiVo Modem Port
+# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port
+#
+# To use a modem on the TiVo serial port
+#   Tivo (stereo mini jack) ->
+#   -> (stereo mini plug) TiVo serial cable (9-pin male) ->
+#   -> (9-pin Female) PC modem cable (25-pin Male ->
+#   -> (25-pin Female) Modem
+# if the modem has switches, disable DTR
+# Use this string to set the modem before attaching it to the TiVo:
+#   AT&F0&D0&B1&W
+#
+# set ttyport = /dev/ttyS3 # TiVo Serial Port
+#
+# End TiVo Settings
+
diff --git a/abs/core-testing/live-installer/templates/real_change_chan.sh b/abs/core-testing/live-installer/templates/real_change_chan.sh
new file mode 100755
index 0000000..efeba88
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/real_change_chan.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+REMOTE_NAME=SA3250
+cmd="$1"
+
+case $cmd in
+	    [0-9]*)
+	        for digit in $(echo $1 | sed -e 's/./& /g'); do 
+		        irsend SEND_ONCE $REMOTE_NAME $digit
+		        sleep  0.3
+	        # If things work OK with sleep 1, try this for faster channel changes:
+	        # sleep 0.3
+	    done
+	        ;;
+
+	   *)
+	           irsend SEND_ONCE $REMOTE_NAME $cmd
+									            ;;
+    esac
+    /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
new file mode 100644
index 0000000..e7c1539
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
@@ -0,0 +1,357 @@
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre2(atiusb) on Fri Jan  2 19:09:02 2004
+#
+# contributed by 
+#
+# brand:     ATI Remote Wonder
+# model no. of remote control: 
+# devices being controlled by this remote:
+#
+
+begin remote
+
+  name  wonder
+  bits           32
+  eps            30
+  aeps          100
+
+  one             0     0
+  zero            0     0
+  gap          147987
+  toggle_bit      0
+
+
+      begin codes
+          A                        0x0000000014C500F0
+          B                        0x0000000014C601F0
+          POWER                    0x0000000014C702F0
+          TV                       0x0000000014C803F0
+          DVD                      0x0000000014C904F0
+          WEB                      0x0000000014CA05F0
+          GUIDE                    0x0000000014CB06F0
+          GRAB                     0x0000000014CC07F0
+          VOL_DOWN                 0x0000000014CE09F0
+          VOL_UP                   0x0000000014CD08F0
+          MUTE                     0x0000000014CF0AF0
+          CH_DOWN                  0x0000000014D10CF0
+          CH_UP                    0x0000000014D00BF0
+          A                        0x0000000014C500F0
+          B                        0x0000000014C601F0
+          1                        0x0000000014D20DF0
+          2                        0x0000000014D30EF0
+          3                        0x0000000014D40FF0
+          4                        0x0000000014D510F0
+          5                        0x0000000014D611F0
+          6                        0x0000000014D712F0
+          7                        0x0000000014D813F0
+          8                        0x0000000014D914F0
+          9                        0x0000000014DA15F0
+          0                        0x0000000014DC17F0
+          MENU                     0x0000000014DB16F0
+          CHECK                    0x0000000014DD18F0
+          C                        0x0000000014DE19F0
+          D                        0x0000000014E01BF0
+          UP                       0x0000000014DF1AF0
+          LEFT                     0x0000000014E21DF0
+          DOWN                     0x0000000014E722F0
+          RIGHT                    0x0000000014E41FF0
+          OK                       0x0000000014E31EF0
+          REPLAY                   0x0000000014E11CF0
+          FULLSCREEN               0x0000000014E520F0
+          E                        0x0000000014E621F0
+          F                        0x0000000014E823F0
+          REWIND                   0x0000000014E924F0
+          FORWARD                  0x0000000014EB26F0
+          PLAY                     0x0000000014EA25F0
+          RECORD                   0x0000000014EC27F0
+          STOP                     0x0000000014ED28F0
+          PAUSE                    0x0000000014EE29F0
+      end codes
+
+end remote
+
+
+
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
+#
+# contributed by Steffen
+#
+# brand: ATI Sapphire Remote Bob II USB
+# model no. of remote control: 5000024400
+# devices being controlled by this remote: MythTV
+#
+
+begin remote
+
+name       wonder II
+bits       16
+eps        30
+aeps       100
+
+one            0 0
+zero           0 0
+pre_data_bits  8
+pre_data       0x0
+post_data_bits 16
+post_data      0x0
+gap            299851
+toggle_bit     0
+
+
+begin codes
+aux1                0x023F
+aux2                0x023F
+aux3                0x023F
+aux4                0x023F
+mouse_left_btn      0x02A9
+mouse_right_btn     0x02AA
+a                   0x0278
+b                   0x0279
+power               0x020C
+dvd                 0x0238
+tv                  0x0239
+help                0x02BE
+pc                  0x023F
+resize              0x02D5
+hand                0x02D0
+ati                 0x028E
+vol_up              0x0210
+vol_down            0x0211
+mute                0x020D
+ch_up               0x0220
+ch_down             0x0221
+mouse_up            0x013F
+mouse_down          0x013F
+mouse_left          0x013F
+mouse_right         0x013F
+1                   0x0201
+2                   0x0202
+3                   0x0203
+4                   0x0204
+5                   0x0205
+6                   0x0206
+7                   0x0207
+8                   0x0208
+9                   0x0209
+0                   0x0200
+list                0x0254
+check               0x0282
+info                0x02F9
+timer               0x0296
+arrow_up            0x0258
+arrow_left          0x025A
+arrow_right         0x025B
+arrow_down          0x0259
+ok                  0x025C
+c                   0x017A
+d                   0x027B
+play                0x022C
+e                   0x027C
+f                   0x027D
+rewind              0x0229
+rec                 0x0237
+stop                0x0231
+pause               0x0230
+ffwd                0x0228
+end codes
+
+end remote
+
+
+# Please make this file available to others
+# by sending it to <lirc at bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004
+#
+# contributed by gLaNDix
+#
+# brand: ATI
+# model no. of remote control: 5000023600
+# devices being controlled by this remote: MythTV 0.14
+#
+# USB ID: 0bc7:0004
+#
+
+begin remote
+
+   name           REMOTE_WONDER
+   bits           16
+   eps            30
+   aeps          100
+
+   one             0     0
+   zero            0     0
+   pre_data_bits   8
+   pre_data       0x14
+   post_data_bits  16
+   post_data      0x0
+   gap          227933
+   toggle_bit      0
+
+
+       begin codes
+           A                        0x000000000000D500
+           B                        0x000000000000D601
+           C                        0x000000000000EE19
+           D                        0x000000000000F01B
+           E                        0x000000000000F621
+           F                        0x000000000000F823
+           POWER                    0x000000000000D702
+           TV                       0x000000000000D803
+           DVD                      0x000000000000D904
+           WEB                      0x000000000000DA05
+           BOOK                     0x000000000000DB06
+           HAND                     0x000000000000DC07
+           MOUSE_LEFT_BTN	          0x0000000000004D78
+           MOUSE_LEFTBUTTONUP       0x0000000000004E79
+           MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79
+           MOUSE_RIGHT_BTN          0x000000000000517C
+           MOUSE_RIGHTBUTTONUP      0x000000000000527D
+           MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E
+           MOUSE_LEFT               0x0000000000004570
+           MOUSE_RIGHT              0x0000000000004671
+           MOUSE_UP                 0x0000000000004772
+           MOUSE_DOWN               0x0000000000004873
+           MOUSE_UPRIGHT            0x0000000000004A75
+           MOUSE_DOWNRIGHT          0x0000000000004B76
+           MOUSE_DOWNLEFT           0x0000000000004C77
+           MOUSE_UPLEFT             0x0000000000004974
+           VOL_UP                   0x000000000000DD08
+           VOL_DOWN                 0x000000000000DE09
+           MUTE                     0x000000000000DF0A
+           CH_DOWN                  0x000000000000E10C
+           CH_UP                    0x000000000000E00B
+           1                        0x000000000000E20D
+           2                        0x000000000000E30E
+           3                        0x000000000000E40F
+           4                        0x000000000000E510
+           5                        0x000000000000E611
+           6                        0x000000000000E712
+           7                        0x000000000000E813
+           8                        0x000000000000E914
+           9                        0x000000000000EA15
+           0                        0x000000000000EC17
+           DVD_ROOTMENU             0x000000000000EB16
+           SETUP                    0x000000000000ED18
+           ARROW_UP                 0x000000000000EF1A
+           ARROW_RIGHT              0x000000000000F41F
+           ARROW_DOWN               0x000000000000F722
+           ARROW_LEFT               0x000000000000F21D
+           OK                       0x000000000000F31E
+           MAXAMIZE                 0x000000000000F520
+           TV_ON_DEMAND             0x000000000000F11C
+           BACK                     0x000000000000F924
+           PLAY                     0x000000000000FA25
+           NEXT                     0x000000000000FB26
+           RECORD                   0x000000000000FC27
+           STOP                     0x000000000000FD28
+           PAUSE                    0x000000000000FE29
+       end codes
+
+end remote
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
+#
+# contributed by Jason Piterak
+#
+# brand:                       ati
+#                                   This uses the atiusb driver
+#=20
+# model no. of remote control: 5000022000
+#
+# devices being controlled by this remote:
+# MythTV PVR using knopmyth by Cecil and Dale at
+#  http://mysettopbox.tv
+# Key map names are as per ATI's website:
+#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
+# Feel free to change them as you see fit :-)
+#
+# NOTE:  There are 16 channels for this remote; this file only
+# supports one channel.  See the GATOS project for information
+# on how to change the channel.  Not tested.  Unknown channel.
+#
+
+begin remote
+
+  name  atiusb
+  bits           16
+  eps            30
+  aeps          100
+
+  one             0     0
+  zero            0     0
+  pre_data_bits   8
+  pre_data       0x14
+  post_data_bits  16
+  post_data      0xF000
+  gap          139891
+  toggle_bit      0
+
+
+      begin codes
+          a                        0x000000000000C500
+          b                        0x000000000000C601
+          power                    0x000000000000C702
+          tv                       0x000000000000C803
+          dvd                      0x000000000000C904
+          web                      0x000000000000CA05
+          media_library            0x000000000000CB06
+          drag                     0x000000000000CC07
+          mouse-button_left        0x0000000000003D78
+          mouse-button_right       0x000000000000417C
+          mouse-up                 0x0000000000003772
+          mouse-down               0x0000000000003873
+          mouse-left               0x0000000000003570
+          mouse-right              0x0000000000003671
+          mouse-left_up            0x0000000000003974
+          mouse-right_up           0x0000000000003A75
+          mouse-left_down          0x0000000000003C77
+          mouse-right_down         0x0000000000003B76
+          vol-up                   0x000000000000CD08
+          vol-down                 0x000000000000CE09
+          mute                     0x000000000000CF0A
+          chan-up                  0x000000000000D00B
+          chan-down                0x000000000000D10C
+          1                        0x000000000000D20D
+          2                        0x000000000000D30E
+          3                        0x000000000000D40F
+          4                        0x000000000000D510
+          5                        0x000000000000D611
+          6                        0x000000000000D712
+          7                        0x000000000000D813
+          8                        0x000000000000D914
+          9                        0x000000000000DA15
+          0                        0x000000000000DC17
+          dvd-root_menu            0x000000000000DB16
+          launch_setup             0x000000000000DD18
+          c                        0x000000000000DE19
+          d                        0x000000000000E01B
+          tv_on_demand             0x000000000000E11C
+          max_window               0x000000000000E520
+          cursor-up                0x000000000000DF1A
+          cursor-down              0x000000000000E722
+          cursor-left              0x000000000000E21D
+          cursor-right             0x000000000000E41F
+          ok                       0x000000000000E31E
+          e                        0x000000000000E621
+          f                        0x000000000000E823
+          rewind                   0x000000000000E924
+          play                     0x000000000000EA25
+          fast_forward             0x000000000000EB26
+          record                   0x000000000000EC27
+          stop                     0x000000000000ED28
+          pause                    0x000000000000EE29
+      end codes
+
+end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
new file mode 100644
index 0000000..80eec07
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
@@ -0,0 +1,922 @@
+# ~/.mythtv/lircrc
+# 
+# MythTV native LIRC config file for
+# the ATI-Wonder Remote
+# using lirc_atiusb driver
+# 
+
+begin
+prog = mythtv
+button = a
+config = E
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = A
+config = E
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = b
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = B
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = B
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = stop
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ffwd
+config = Right
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = FORWARD
+config = Right
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = rewind
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = REWIND
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = pause
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = play
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = mute
+config = |
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = MUTE
+config = |
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = vol_down
+config = F10
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+config = F10
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = vol_up
+config = F11
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+config = F11
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = f
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = F
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = e
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = E
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ch_up
+config = Up
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = CH_UP
+config = Up
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ch_down
+config = Down
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+config = Down
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ok
+config = Enter
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = OK
+config = Enter
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = rec
+config = R
+repeat = 5
+end 
+
+begin
+prog = mythtv
+button = RECORD
+config = R
+repeat = 5
+end 
+
+
+# ~/.mythtv/lircrc
+# 
+# MythTV native LIRC config file for
+# the ATI-Wonder Remote
+# using lirc_atiusb driver
+# 
+
+begin
+#Jumppoint for Program Guide created in Mythweb
+    prog = mythtv
+    button = TV
+    config = ! 
+end
+
+begin
+#Jumppoint for DVD playback created in Mythweb
+    prog = mythtv
+    button = DVD
+    config = @
+end
+
+begin
+    prog = mythtv
+#Jumppoint for MythWeater created in Mythweb
+    button = WEB
+    config = #
+end
+
+begin
+    prog = mythtv
+#Jumppoint for MythVideo created in Mythweb
+    button = BOOK
+    config = $
+end
+
+begin
+    prog = mythtv
+#Jumppoint for MythWeater created in Mythweb
+    button = HAND
+    config = %
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+    prog = mythtv
+    button = MOUSE_UP
+    config = Up
+end
+
+begin
+    prog = mythtv
+    button = MOUSE_DOWN
+    config = Down
+end
+
+begin
+    prog = mythtv
+    button = MOUSE_LEFT
+    config = Left
+end
+
+begin
+    prog = mythtv
+    button = MOUSE_RIGHT 
+    config = Right
+end
+
+begin
+    prog = mythtv
+    button = MOUSE_RIGHT_BTN
+    config = Esc
+end
+
+begin
+    prog = mythtv
+# Enter button
+    button = MOUSE_LEFT_BTN 
+    config = Return
+end
+
+begin
+    prog = mythtv
+    button = POWER
+    config = Esc
+end
+
+begin
+    prog = mythtv
+# Enter button
+    button = OK
+    config = Return
+end
+
+begin
+    prog = mythtv
+    button = ARROW_UP
+    config = Up
+end
+
+begin
+    prog = mythtv
+    button = ARROW_DOWN
+    config = Down
+end
+
+begin
+    prog = mythtv
+    button = ARROW_LEFT
+    config = Left
+end
+
+begin
+    prog = mythtv
+    button = ARROW_RIGHT 
+    config = Right
+end
+
+begin
+    prog = mythtv
+    button = D
+    config = Esc
+end
+
+begin
+prog = mythtv
+button = CH_UP
+config = Up
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+config = Down
+end
+
+begin
+  prog = mythtv
+  button = VOL_DOWN
+  repeat = 3
+  config = F10  
+end
+
+begin
+  prog = mythtv
+  button = VOL_UP
+  repeat = 3
+  config = F11  
+end
+
+begin
+    prog = mythtv
+    button = MUTE
+    config = |  
+end
+
+begin
+    prog = mythtv
+    button = DVD_ROOTMENU
+    config = M  
+end
+
+begin
+    prog = mythtv
+# Enter button
+    button = SETUP 
+    config = Return
+end
+
+
+begin
+    prog = mythtv
+    button = A 
+    config = S  
+end
+
+begin
+    prog = mythtv
+    button = B
+    config = I   
+end
+
+begin
+    prog = mythtv
+    button = C
+    config = T   
+end
+
+begin
+prog = mythtv
+# Change focus for PiP (to change channel in the other window)
+button = MAXAMIZE
+config = B
+end
+
+begin
+prog = mythtv
+# Toggle PiP on/off
+button = TV_ON_DEMAND
+config = V
+end
+
+begin
+    prog = mythtv
+    button = BACK
+    config = <  
+end
+
+begin
+    prog = mythtv
+    button = NEXT
+    config = >  
+end
+
+begin
+    prog = mythtv
+    button = BACK
+    config = Left  
+end
+
+
+begin
+    prog = mythtv
+    button = NEXT
+    config = Right  
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = R
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = P
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = P
+end
+
+#Page Up/Down
+begin
+prog = mythtv
+button = E
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = F
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = E
+# Use for backwards commercial skip
+config = Q
+end
+
+begin
+prog = mythtv
+button = F
+# Use for forward commercial skip
+config = Z
+end
+
+#Mplayer
+
+begin
+prog = mplayer
+button = PLAY
+config = pause
+end
+
+begin
+prog = mplayer
+button = PAUSE
+config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = D
+config = quit
+end
+
+begin
+prog = mplayer
+button = MOUSE_RIGHT_BTN
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = E
+repeat = 6
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = F
+repeat = 6
+config = seek 10
+end
+
+begin
+prog = mplayer
+button = BACK
+repeat = 6
+config = seek -70
+end
+
+begin
+prog = mplayer
+button = NEXT
+repeat = 6
+config = seek 70
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 6
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 6
+config = volume 1
+end
+
+#Xine
+
+begin
+prog = xine
+button = PLAY
+config = Play
+end
+
+begin
+prog = xine
+button = PAUSE
+config = PAUSE
+end
+
+begin
+prog = xine
+button = Mute
+config = Mute
+end
+
+begin
+prog = xine
+button = STOP
+config = Stop
+end
+
+begin
+prog = xine
+button = POWER
+config = Quit
+end
+
+begin
+prog = xine
+button = D
+config = quit
+end
+
+begin
+prog = xine
+button = MOUSE_RIGHT_BTN
+config = quit
+end
+
+begin
+prog = xine
+button = ARROW_UP
+repeat = 4
+config = EventUp
+end
+
+begin
+prog = xine
+button = ARROW_DOWN
+repeat = 4
+config = EventDown
+end
+
+begin
+prog = xine
+button = ARROW_LEFT
+repeat = 4
+config = EventLeft
+end
+
+begin
+prog = xine
+button = ARROW_RIGHT
+repeat = 4
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 0
+config = EventSelect
+end
+
+begin
+prog = xine
+button = MOUSE_UP
+repeat = 4
+config = EventUp
+end
+
+begin
+prog = xine
+button = MOUSE_DOWN
+repeat = 4
+config = EventDown
+end
+
+begin
+prog = xine
+button = MOUSE_LEFT
+repeat = 4
+config = EventLeft
+end
+
+begin
+prog = xine
+button = MOUSE_RIGHT
+repeat = 4
+config = EventRight
+end
+
+begin
+prog = xine
+button = MOUSE_LEFT_BTN
+repeat = 0
+config = EventSelect
+end
+
+begin
+prog = xine
+button = DVD_ROOTMENU
+repeat = 0
+config = Menu
+end
+
+#vol down
+begin
+prog = xine
+button = VOL_DOWN
+repeat = 1
+config = Volume-
+end
+
+#vol up
+begin
+prog = xine
+button = VOL_UP
+repeat = 1
+config = Volume+
+end
+
+begin
+prog = xine
+button = TV_ON_DEMAND
+repeat = 1
+config = ZoomIn
+end
+
+begin
+prog = xine
+button = MAXAMIZE
+repeat = 1
+config = ZoomOut
+end
+
+#skip chapter forward
+begin
+prog = xine
+button = NEXT
+repeat = 1
+config = EventNext
+end
+
+#skip chapter backward
+begin
+prog = xine
+button = BACK
+repeat = 1
+config = EventPrior
+end
+
+begin
+prog = xine
+button = F
+repeat = 2
+config = SeekRelative+45
+end
+
+begin
+prog = xine
+button = E
+repeat = 2
+config = SeekRelative-45
+end 
+
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg
new file mode 100644
index 0000000..351a111
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
new file mode 100644
index 0000000..b76d32c
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
@@ -0,0 +1,115 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand:                       Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+  name  Streamzap_PC_Remote
+  bits            6
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           889  889
+  zero          889  889
+  plead         889
+  pre_data_bits   8
+  pre_data       0xA3
+  gap          108344
+  toggle_bit      2
+
+
+      begin codes
+          0                        0x00
+          1                        0x01
+          2                        0x02
+          3                        0x03
+          4                        0x04
+          5                        0x05
+          6                        0x06
+          7                        0x07
+          8                        0x08
+          9                        0x09
+          POWER                    0x0A
+          MUTE                     0x0B
+          CH_UP                    0x0C
+          VOL_UP                   0x0D
+          CH_DOWN                  0x0E
+          VOL_DOWN                 0x0F
+          UP                       0x10
+          LEFT                     0x11
+          OK                       0x12
+          RIGHT                    0x13
+          DOWN                     0x14
+          MENU                     0x15
+          EXIT                     0x16
+          PLAY                     0x17
+          PAUSE                    0x18
+          STOP                     0x19
+          |<<                      0x1A
+          >>|                      0x1B
+          RECORD                   0x1C
+          <<                       0x1D
+          >>                       0x1E
+          RED                      0x20
+          GREEN                    0x21
+          YELLOW                   0x22
+          BLUE                     0x23
+      end codes
+
+end remote
+
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.2(streamzap) on Mon Dec  5 08:45:02 2005
+#
+# contributed by 
+#
+# brand:                       RS_LD_120-MX500
+# model no. of remote control: 
+# devices being controlled by this remote:
+#
+
+begin remote
+
+  name  RS_LD
+  bits           15
+  flags SPACE_ENC|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           384  1920
+  zero          384   896
+  ptrail        384
+  gap          70400
+  min_repeat      2
+  toggle_bit      0
+
+
+      begin codes
+          RESET 	   0x19FD
+          TIME             0X1902
+          BLANK            0X1B02
+          PICTURE          0X1882
+          ASPECT           0X1A82
+          BROWSE           0X1982
+          DELETE           0X1B82
+          CARD             0X1842
+          CARD_SOURCE      0X1A42
+          SPARE1           0X1942
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc
new file mode 100644
index 0000000..5e668b5
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc
@@ -0,0 +1,832 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+        remote = RS_LD
+        button = RESET
+        prog   = irexec
+        repeat = 0
+        config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+        remote = RS_LD
+        button = TIME
+        prog   = irexec
+        repeat = 10
+        config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+        remote = RS_LD
+        button = BLANK
+        prog   = irexec
+        repeat = 0
+#      config  = ls
+        config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 4
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote =  Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+end
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = i
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+    prog = mplayer
+    button = pause
+    config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine  commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+        button = DELETE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+        button = PICTURE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button =  >>
+repeat = 4
+#config = SeekRelative+30
+config =  SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config =  SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config =  SeekRelative-1200
+end
+
+begin
+prog   = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog   = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog   = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog   = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog   = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog   = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog   = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog   = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog   = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog   = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog   = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog   = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog   = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+  begin
+    prog = xmms
+    button = PLAY
+    config = PLAY
+  end
+  begin
+    prog = xmms
+    button = clear
+    config = PLAYLIST_CLEAR
+  end
+  begin
+    prog = xmms
+    button = load
+    config = PLAYLIST_ADD .xmms/xmms.m3u
+   end
+  begin
+    prog = xmms
+    button = PAUSE
+    config = PAUSE
+  end
+  begin
+    prog = xmms
+    button = STOP
+    config = STOP
+  end
+  begin
+    prog = xmms
+    button = EXIT
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = POWER
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = CH_UP
+    config = NEXT
+  end
+  begin
+    prog = xmms
+    button = CH_DOWN
+    config = PREV
+  end
+  
+
+
+begin
+    prog = xmms
+    button = >>|
+    config = NEXT
+  end
+begin
+    prog = xmms
+    button = |<<
+    config = PREV
+end
+
+
+begin
+    prog = xmms
+    button = <<
+    config = FWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = <<
+    config = BWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = volup
+    config = VOL_UP 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = voldown
+    config = VOL_DOWN 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = 1
+    config = ONE
+  end
+  begin
+    prog = xmms
+    button = 2
+    config = TWO
+  end
+  begin
+    prog = xmms
+    button = 3
+    config = THREE
+  end
+  begin
+    prog = xmms
+    button = 4
+    config = FOUR
+  end
+  begin
+    prog = xmms
+    button = 5
+    config = FIVE
+  end
+  begin
+    prog = xmms
+    button = 6
+    config = SIX
+  end
+  begin
+    prog = xmms
+    button = 7
+    config = SEVEN
+  end
+  begin
+    prog = xmms
+    button = 8
+    config = EIGHT
+  end
+  begin
+    prog = xmms
+    button = 9
+    config = NINE
+  end
+  begin
+    prog = xmms
+    button = 0
+    config = ZERO
+  end
+  begin
+    prog = xmms
+    button = enter
+    config = SETPOS
+  end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg
new file mode 100644
index 0000000..38857f9
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf
new file mode 100644
index 0000000..b76d32c
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf
@@ -0,0 +1,115 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand:                       Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+  name  Streamzap_PC_Remote
+  bits            6
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           889  889
+  zero          889  889
+  plead         889
+  pre_data_bits   8
+  pre_data       0xA3
+  gap          108344
+  toggle_bit      2
+
+
+      begin codes
+          0                        0x00
+          1                        0x01
+          2                        0x02
+          3                        0x03
+          4                        0x04
+          5                        0x05
+          6                        0x06
+          7                        0x07
+          8                        0x08
+          9                        0x09
+          POWER                    0x0A
+          MUTE                     0x0B
+          CH_UP                    0x0C
+          VOL_UP                   0x0D
+          CH_DOWN                  0x0E
+          VOL_DOWN                 0x0F
+          UP                       0x10
+          LEFT                     0x11
+          OK                       0x12
+          RIGHT                    0x13
+          DOWN                     0x14
+          MENU                     0x15
+          EXIT                     0x16
+          PLAY                     0x17
+          PAUSE                    0x18
+          STOP                     0x19
+          |<<                      0x1A
+          >>|                      0x1B
+          RECORD                   0x1C
+          <<                       0x1D
+          >>                       0x1E
+          RED                      0x20
+          GREEN                    0x21
+          YELLOW                   0x22
+          BLUE                     0x23
+      end codes
+
+end remote
+
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.2(streamzap) on Mon Dec  5 08:45:02 2005
+#
+# contributed by 
+#
+# brand:                       RS_LD_120-MX500
+# model no. of remote control: 
+# devices being controlled by this remote:
+#
+
+begin remote
+
+  name  RS_LD
+  bits           15
+  flags SPACE_ENC|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           384  1920
+  zero          384   896
+  ptrail        384
+  gap          70400
+  min_repeat      2
+  toggle_bit      0
+
+
+      begin codes
+          RESET 	   0x19FD
+          TIME             0X1902
+          BLANK            0X1B02
+          PICTURE          0X1882
+          ASPECT           0X1A82
+          BROWSE           0X1982
+          DELETE           0X1B82
+          CARD             0X1842
+          CARD_SOURCE      0X1A42
+          SPARE1           0X1942
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc
new file mode 100755
index 0000000..2663c63
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc
@@ -0,0 +1,857 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+        remote = RS_LD
+        button = RESET
+        prog   = irexec
+        repeat = 0
+        config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+        remote = RS_LD
+        button = TIME
+        prog   = irexec
+        repeat = 10
+        config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+        remote = RS_LD
+        button = BLANK
+        prog   = irexec
+        repeat = 0
+#      config  = ls
+        config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 5
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+repeat = 5
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote =  Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+repeat = 5
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+repeat = 5
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+repeat = 5
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = S
+repeat = 5
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+    prog = mplayer
+    button = pause
+    config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine  commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+        button = DELETE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+        button = PICTURE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button =  >>
+repeat = 4
+#config = SeekRelative+30
+config =  SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config =  SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config =  SeekRelative-1200
+end
+
+begin
+prog   = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog   = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog   = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog   = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog   = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog   = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog   = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog   = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog   = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog   = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog   = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog   = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog   = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+  begin
+    prog = xmms
+    button = PLAY
+    config = PLAY
+  end
+  begin
+    prog = xmms
+    button = clear
+    config = PLAYLIST_CLEAR
+  end
+  begin
+    prog = xmms
+    button = load
+    config = PLAYLIST_ADD .xmms/xmms.m3u
+   end
+  begin
+    prog = xmms
+    button = PAUSE
+    config = PAUSE
+  end
+  begin
+    prog = xmms
+    button = STOP
+    config = STOP
+  end
+  begin
+    prog = xmms
+    button = EXIT
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = POWER
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = CH_UP
+    config = NEXT
+  end
+  begin
+    prog = xmms
+    button = CH_DOWN
+    config = PREV
+  end
+  
+
+
+begin
+    prog = xmms
+    button = >>|
+    config = NEXT
+  end
+begin
+    prog = xmms
+    button = |<<
+    config = PREV
+end
+
+
+begin
+    prog = xmms
+    button = <<
+    config = FWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = <<
+    config = BWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = volup
+    config = VOL_UP 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = voldown
+    config = VOL_DOWN 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = 1
+    config = ONE
+  end
+  begin
+    prog = xmms
+    button = 2
+    config = TWO
+  end
+  begin
+    prog = xmms
+    button = 3
+    config = THREE
+  end
+  begin
+    prog = xmms
+    button = 4
+    config = FOUR
+  end
+  begin
+    prog = xmms
+    button = 5
+    config = FIVE
+  end
+  begin
+    prog = xmms
+    button = 6
+    config = SIX
+  end
+  begin
+    prog = xmms
+    button = 7
+    config = SEVEN
+  end
+  begin
+    prog = xmms
+    button = 8
+    config = EIGHT
+  end
+  begin
+    prog = xmms
+    button = 9
+    config = NINE
+  end
+  begin
+    prog = xmms
+    button = 0
+    config = ZERO
+  end
+  begin
+    prog = xmms
+    button = enter
+    config = SETPOS
+  end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg
new file mode 100644
index 0000000..e2af610
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
new file mode 100644
index 0000000..f8175f3
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
@@ -0,0 +1,87 @@
+# this config file was generated
+# using lirc-0.7.0pre2(hauppauge) on Thu Jan  1 00:35:50 2004
+#
+# contributed by Jarod Wilson <jcw@wilsonet.com>
+#------------------------------------------------------------------------------
+#
+# filename:          RadioShack_15-2116-vcr0081.lirc
+# encoding:          RC-5
+# brand:             RadioShack Universal (and others)
+# model:             15-2116, set as VCR type 0081
+# supported devices: all
+#
+# note: requires quite a bit of key reassignment w/keymover and EFCs...
+# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO
+#
+#------------------------------------------------------------------------------
+
+begin remote
+  
+  name      rs15-2116-vcr0081
+  bits              11
+  flags     RC5|CONST_LENGTH
+  eps               20
+  aeps              0
+  header            0   0
+  one               889 889
+  zero              889 889
+  plead             889
+  ptrail            0
+  foot              0   0
+  repeat            0   0
+  pre_data_bits     2
+  pre_data          0x02
+  post_data_bits    0
+  post_data         0x0
+  pre               0   0
+  post              0   0
+  gap               113792
+  toggle_bit        2
+  frequency         36000
+  duty_cycle        50
+
+  begin codes
+        0           0x0000000000000140
+        1           0x0000000000000141
+        2           0x0000000000000142
+        3           0x0000000000000143
+        4           0x0000000000000144
+        5           0x0000000000000145
+        6           0x0000000000000146
+        7           0x0000000000000147
+        8           0x0000000000000148
+        9           0x0000000000000149
+        INFO        0x000000000000014a
+	SELECT      0x000000000000014b
+        POWER       0x000000000000014c
+        MUTE        0x000000000000014d
+        MOVE        0x000000000000014e
+        VOL+        0x0000000000000150
+        VOL-        0x0000000000000151
+        RIGHT       0x000000000000015a
+        LEFT        0x000000000000015b
+        ENTER       0x000000000000015c
+        MENU        0x000000000000015d
+        CH+         0x0000000000000160
+        CH-         0x0000000000000161
+        PIP         0x0000000000000162
+        SWAP        0x0000000000000163
+        SLEEP       0x0000000000000166
+        FREEZE      0x0000000000000168
+        PAUSE       0x0000000000000169
+        SKIP        0x000000000000016a
+        EXIT        0x0000000000000171
+        REW         0x0000000000000172
+        REPLAY      0x0000000000000173
+        FFWD        0x0000000000000174
+        PLAY        0x0000000000000175
+        STOP        0x0000000000000176
+        REC         0x0000000000000177
+        SKIP        0x0000000000000178
+        +100        0x0000000000000179
+        LAST        0x000000000000017b
+        GUIDE       0x000000000000017c
+        TV/VIDEO    0x000000000000017e
+  end codes
+
+end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
new file mode 100644
index 0000000..91c0de5
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
@@ -0,0 +1,539 @@
+# ~/.mythtv/lircrc
+# 
+# MythTV native LIRC config file for
+# the RadioShack 15-2116, VCR type 0081
+# using Hauppauge IR receiver
+# 
+# By Jarod Wilson, 2003/12/31
+# Amalgamated from Harry O's
+# .lircrc, the mythtv.org docs, and
+# a few touches of my own. :)
+#
+
+# Channel Up
+begin
+prog = mythtv
+button = CH+
+repeat = 4
+config = Up
+end
+
+# Channel Down
+begin
+prog = mythtv
+button = CH-
+repeat = 4
+config = Down
+end
+
+# OK/Select
+begin
+prog = mythtv
+button = SELECT
+repeat = 4
+config = Return
+end
+
+# Play
+begin
+prog = mythtv
+button = PLAY
+repeat = 4
+config = Space
+end
+
+# Stop
+begin
+prog = mythtv
+button = STOP
+repeat = 4
+config = Esc
+end
+
+# Escape/Exit/Back
+begin
+prog = mythtv
+button = EXIT
+repeat = 4
+config = Esc
+end
+
+# Power Off/Exit
+begin
+prog = mythtv
+button = POWER
+repeat = 4
+config = Esc
+end
+
+# Pause
+begin
+prog = mythtv
+button = PAUSE
+repeat = 4
+config = P
+end
+
+# Mute
+begin
+prog = mythtv
+button = MUTE
+repeat = 4
+config = |
+end
+
+# Rewind (10 sec default)
+begin
+prog = mythtv
+button = REW
+repeat = 4
+config = Left
+end
+
+begin
+prog = mythtv
+button = LEFT
+repeat = 4
+config = Left
+end
+
+# Fast forward (30 sec default)
+begin
+prog = mythtv
+button = FFWD
+repeat = 4
+config = Right
+end
+
+begin
+prog = mythtv
+button = RIGHT
+repeat = 4
+config = Right
+end
+
+# Skip forward (10 min default)
+begin
+prog = mythtv
+button = FREEZE
+repeat = 4
+config = PgDown
+end
+
+# Skip backward (10 min default)
+begin
+prog = mythtv
+button = MOVE
+repeat = 4
+config = PgUp
+end
+
+# Record
+begin
+prog = mythtv
+button = REC
+repeat = 4
+config = R
+end
+
+# OSD browse
+begin
+prog = mythtv
+button = GUIDE
+repeat = 4
+config = O
+end
+
+# Display EPG while in live TV,
+# View selected show while in EPG
+begin
+prog = mythtv
+button = MENU
+repeat = 4
+config = M
+end
+
+# Bring up OSD info
+begin
+prog = mythtv
+button = INFO
+repeat = 4
+config = I
+end
+
+# Change display aspect ratio
+begin
+prog = mythtv
+button = +100
+repeat = 4
+config = W
+end
+
+# Seek to previous commercial cut point
+begin
+prog = mythtv
+button = SLEEP
+repeat = 4
+config = Q
+end
+
+# Seek to next commercial cut point
+begin
+prog = mythtv
+button = ENTER
+repeat = 4
+config = Z
+end
+
+# Change TV card input
+begin
+prog = mythtv
+button = TV/VIDEO
+repeat = 4
+config = C
+end
+
+# Toggle Picture-In-Picture
+begin
+prog = mythtv
+button = PIP
+repeat = 4
+config = V
+end
+
+# Swap PIP
+begin
+prog = mythtv
+button = SWAP
+repeat = 4
+config = N
+end
+
+# Cycle through channel history
+begin
+prog = mythtv
+button = LAST
+repeat = 4
+config = H
+end
+
+# Numbers 0-9
+
+begin
+prog = mythtv
+button = 0
+repeat = 4
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+repeat = 4
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+repeat = 4
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+repeat = 4
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+repeat = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+repeat = 4
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+repeat = 4
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+repeat = 4
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+repeat = 4
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+repeat = 4
+config = 9
+end
+
+### MPlayer commands
+
+begin
+prog = mplayer
+button = MENU
+repeat = 4
+config = osd
+end
+
+begin
+prog = mplayer
+button = PAUSE
+repeat = 4
+config = pause
+end
+
+begin
+prog = mplayer
+button = PLAY
+repeat = 4
+config = seek +1
+end
+
+begin
+prog = mplayer
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = mplayer
+button = REW
+repeat = 4
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = LEFT
+repeat = 4
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = FFWD
+repeat = 4
+config = seek +30
+end
+
+begin
+prog = mplayer
+button = RIGHT
+repeat = 4
+config = seek +30
+end
+
+begin
+prog = mplayer
+button = EXIT
+repeat = 4
+config = quit
+end
+
+begin
+prog = mplayer
+button = FREEZE
+repeat = 4
+config = seek +1200
+end
+
+begin
+prog = mplayer
+button = MOVE
+repeat = 4
+config = seek -1200
+end
+
+begin
+prog = mplayer
+button = +100
+repeat = 4
+config = vo_fullscreen
+end
+
+### Xine commands
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = CH+
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = CH-
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = LEFT
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = RIGHT
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = SELECT
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = GUIDE
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = FFWD
+repeat = 3
+config = SeekRelative+30
+end
+
+begin
+prog = xine
+button = REW
+repeat = 3
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button = VOL+
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VOL-
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = FREEZE
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = LAST 
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = INFO
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = ENTER
+repeat = 3
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = SLEEP
+repeat = 3
+config = SpeedSlower
+end
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
new file mode 100644
index 0000000..d465839
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
new file mode 100644
index 0000000..8e453b9
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
@@ -0,0 +1,69 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand:                       Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+  name  Streamzap_PC_Remote
+  bits            6
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           889  889
+  zero          889  889
+  plead         889
+  pre_data_bits   8
+  pre_data       0xA3
+  gap          108344
+  toggle_bit      2
+
+
+      begin codes
+          0                        0x00
+          1                        0x01
+          2                        0x02
+          3                        0x03
+          4                        0x04
+          5                        0x05
+          6                        0x06
+          7                        0x07
+          8                        0x08
+          9                        0x09
+          POWER                    0x0A
+          MUTE                     0x0B
+          CH_UP                    0x0C
+          VOL_UP                   0x0D
+          CH_DOWN                  0x0E
+          VOL_DOWN                 0x0F
+          UP                       0x10
+          LEFT                     0x11
+          OK                       0x12
+          RIGHT                    0x13
+          DOWN                     0x14
+          MENU                     0x15
+          EXIT                     0x16
+          PLAY                     0x17
+          PAUSE                    0x18
+          STOP                     0x19
+          |<<                      0x1A
+          >>|                      0x1B
+          RECORD                   0x1C
+          <<                       0x1D
+          >>                       0x1E
+          RED                      0x20
+          GREEN                    0x21
+          YELLOW                   0x22
+          BLUE                     0x23
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc
new file mode 100644
index 0000000..6f86bfe
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc
@@ -0,0 +1,472 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'
+begin
+   prog = mythtv
+   button = 0
+   config = 0
+end
+
+begin
+   prog = mythtv
+   button = 1
+   config = 1
+end
+
+begin
+   prog = mythtv
+   button = 2
+   config = 2
+end
+
+begin
+   prog = mythtv
+   button = 3
+   config = 3
+end
+
+begin
+   prog = mythtv
+   button = 4
+   config = 4
+end
+
+begin
+   prog = mythtv
+   button = 5
+   config = 5
+end
+
+begin
+   prog = mythtv
+   button = 6
+   config = 6
+end
+
+begin
+   prog = mythtv
+   button = 7
+   config = 7
+end
+
+begin
+   prog = mythtv
+   button = 8
+   config = 8
+end
+
+begin
+   prog = mythtv
+   button = 9
+   config = 9
+end
+
+begin
+   prog = mythtv
+   button = POWER
+   config = Esc
+end
+
+# ???
+begin
+   prog = mythtv
+   button = MUTE
+   config = F9
+end
+
+begin
+   prog = mythtv
+   button = CH_UP
+   repeat = 3
+   config = Up
+end
+
+begin
+   prog = mythtv
+   button = VOL_UP
+   repeat = 3
+   config = ]
+end
+
+begin
+   prog = mythtv
+   button = CH_DOWN
+   repeat = 3
+   config = Down
+end
+
+begin
+   prog = mythtv
+   button = VOL_DOWN
+   repeat = 3
+   config = [
+end
+
+begin
+   prog = mythtv
+   button = UP
+   repeat = 3
+   config = Up
+end
+
+begin
+   prog = mythtv
+   button = LEFT
+# navigates, or skips back during playback or live tv.
+   config = Left
+end
+
+begin
+   prog = mythtv
+   button = OK
+   config = Return
+end
+
+begin
+   prog = mythtv
+   button = RIGHT
+# navigates, or skips forwards during playback or live tv. 
+   config = Right
+end
+
+begin
+   prog = mythtv
+   button = DOWN
+   repeat = 3
+   config = Down
+end
+
+begin
+   prog = mythtv
+   button = MENU
+   config = m
+end
+
+begin
+   prog = mythtv
+   button = EXIT
+   config = Esc
+end
+
+begin
+   prog = mythtv
+   button = PLAY
+   config = l
+end
+
+begin
+   prog = mythtv
+   button = PAUSE
+   config = p
+end
+
+begin
+   prog = mythtv
+   button = STOP
+   config = Esc
+end
+
+begin
+   prog = mythtv
+   # skip backward
+   button = |<<
+   config = PgUp
+end
+
+begin
+   prog = mythtv
+   # skip forward
+   button = >>|
+   config = PgDown
+end
+
+begin
+   prog = mythtv
+   button = RECORD
+   config = r
+end
+
+begin
+   prog = mythtv
+   # rewind
+   button = <<
+   config = <
+end
+
+begin
+   prog = mythtv
+   # fast forward
+   button = >>
+   config = >
+end
+
+begin
+   prog = mythtv
+   button = RED
+   # Delete
+   config = z
+end
+
+begin
+   prog = mythtv
+   button = GREEN
+   # Info
+   config = i
+end
+
+begin
+   prog = mythtv
+   button = YELLOW
+   # change aspect ratio
+   config = w
+end
+
+begin
+   prog = mythtv
+   button = BLUE
+   config = Tab
+end
+
+# MPLAYER
+begin
+   prog = mplayer
+   button = POWER
+   config = quit
+end
+
+begin
+   prog = mplayer
+   button = MUTE
+   config = mute
+end
+
+begin
+   prog = mplayer
+   button = VOL_UP
+   repeat = 3
+   config = volume +1
+end
+
+begin
+   prog = mplayer
+   button = VOL_DOWN
+   repeat = 3
+   config = volume -1
+end
+
+begin
+   prog = mplayer
+   button = UP
+   repeat = 3
+   config = seek +10
+end
+
+begin
+   prog = mplayer
+   button = LEFT
+# navigates, or skips back during playback or live tv.
+   config = seek -30
+end
+
+begin
+   prog = mplayer
+   button = RIGHT
+# navigates, or skips forwards during playback or live tv. 
+   config = seek +60
+end
+
+begin
+   prog = mplayer
+   button = DOWN
+   repeat = 3
+   config = seek -10
+end
+
+begin
+   prog = mplayer
+   button = EXIT
+   config = quit
+end
+
+begin
+   prog = mplayer
+   button = play
+   config = speed_set 1.0
+end
+
+begin
+    prog = mplayer
+    button = pause
+    config = pause
+end
+
+begin
+   prog = mplayer
+   button = STOP
+   config = quit
+end
+
+begin
+   prog = mplayer
+   # skip backward
+   button = |<<
+   config = seek -600
+end
+
+begin
+   prog = mplayer
+   # skip forward
+   button = >>|
+   config = seek +600
+end
+
+begin
+   prog = mplayer
+   # slow forward
+   button = <<
+   config = speed_mult 0.5
+end
+
+begin
+   prog = mplayer
+   # fast forward
+   button = >>
+   config = speed_mult 2.0
+end
+
+### Xine lirc setup By AnDy!
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = UP
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = DOWN
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = LEFT
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = RIGHT
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = >>
+repeat = 3
+#config = SpeedFaster
+config = SeekRelative+60
+end
+
+begin
+prog = xine
+button = <<
+repeat = 3
+#config = SpeedSlower
+config = SeekRelative-60
+end
+
+begin
+prog = xine
+button = VOL_UP
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VOL_DOWN
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = >>|
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = |<<
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = GREEN
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 3
+config = Quit
+end
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg
new file mode 100644
index 0000000..4d1a5fe
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
new file mode 100644
index 0000000..4987807
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
@@ -0,0 +1,274 @@
+#
+# this config file was automatically generated
+# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
+#
+# contributed by Jens Leuschner <leuschner@gmx.net>
+#
+# brand:             Hauppauge
+# model:             
+# supported devices: WinTV primo; WinTV pci; WinTV radio
+#
+# This config file will work with both homebrew receivers and 
+# original Hauppauge TV cards !!!
+#
+
+begin remote
+
+  name  Hauppauge
+  bits           13
+  flags SHIFT_ENC
+  eps            30
+  aeps          100
+
+  one           950   830
+  zero          950   830
+  plead         960
+  gap          89584
+  repeat_bit      2
+
+      begin codes
+          TV                       0x000000000000100F
+          RADIO                    0x000000000000100C
+          FULL_SCREEN              0x000000000000102E
+          CH+                      0x0000000000001020
+          CH-                      0x0000000000001021
+          VOL-                     0x0000000000001011
+          VOL+                     0x0000000000001010
+          MUTE                     0x000000000000100D
+          SOURCE                   0x0000000000001022
+          1                        0x0000000000001001
+          2                        0x0000000000001002
+          3                        0x0000000000001003
+          4                        0x0000000000001004
+          5                        0x0000000000001005
+          6                        0x0000000000001006
+          7                        0x0000000000001007
+          8                        0x0000000000001008
+          9                        0x0000000000001009
+          0                        0x0000000000001000
+          RESERVED                 0x000000000000101E
+          MINIMIZE                 0x0000000000001026
+      end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
+#
+# contributed by 
+#
+# brand: 				Hauppauge
+# model no. of remote control: 
+# devices being controlled by this remote: PVR 2/350
+#
+
+begin remote
+
+  name  hauppauge_pvr
+  bits           13
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           969   811
+  zero          969   811
+  plead        1097
+  gap          114605
+  toggle_bit      2
+
+
+      begin codes
+          Power                    0x00000000000017FD
+          Go                       0x00000000000017FB
+          1                        0x00000000000017C1
+          2                        0x00000000000017C2
+          3                        0x00000000000017C3
+          4                        0x00000000000017C4
+          5                        0x00000000000017C5
+          6                        0x00000000000017C6
+          7                        0x00000000000017C7
+          8                        0x00000000000017C8
+          9                        0x00000000000017C9
+          Back/Exit                0x00000000000017DF
+          0                        0x00000000000017C0
+          Menu                     0x00000000000017CD
+          Red                      0x00000000000017CB
+          Green                    0x00000000000017EE
+          Yellow                   0x00000000000017F8
+          Blue                     0x00000000000017E9
+          Ch+                      0x00000000000017E0
+          Ch-                      0x00000000000017E1
+          Vol-                     0x00000000000017D1
+          Vol+                     0x00000000000017D0
+          Ok                       0x00000000000017E5
+          Mute                     0x00000000000017CF
+          Blank                    0x00000000000017CC
+          Full                     0x00000000000017FC
+          Rewind                   0x00000000000017F2
+          Play                     0x00000000000017F5
+          Forward                  0x00000000000017F4
+          Record                   0x00000000000017F7
+          Stop                     0x00000000000017F6
+          Pause                    0x00000000000017F0
+          Replay                   0x00000000000017E4
+          Skip                     0x00000000000017DE
+      end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
+#
+# contributed by 
+#
+# brand:   Hauppauge 350
+# Created: G.J. Werler (The Netherlands)
+# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
+# Date:    2004/11/28
+# model no. of remote control: Hauppauge A415-HPG
+# devices being controlled by this remote: PVR-350
+#
+
+begin remote
+
+  name  Hauppauge_350
+  bits           13
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           969   811
+  zero          969   811
+  plead        1097
+  gap          114605
+  toggle_bit      2
+
+
+      begin codes
+          Go                       0x00000000000017BB
+          Power                    0x00000000000017BD
+          TV                       0x000000000000179C
+          Videos                   0x0000000000001798
+          Music                    0x0000000000001799
+          Pictures                 0x000000000000179A
+          Guide                    0x000000000000179B
+          Radio                    0x000000000000178C
+          Up                       0x0000000000001794
+          Left                     0x0000000000001796
+          Right                    0x0000000000001797
+          Down                     0x0000000000001795
+          OK                       0x00000000000017A5
+          Back/Exit                0x000000000000179F
+          Menu/i                   0x000000000000178D
+          Vol+                     0x0000000000001790
+          Vol-                     0x0000000000001791
+          Prev.Ch                  0x0000000000001792
+          Mute                     0x000000000000178F
+          Ch+                      0x00000000000017A0
+          Ch-                      0x00000000000017A1
+          Record                   0x00000000000017B7
+          Stop                     0x00000000000017B6
+          Rewind                   0x00000000000017B2
+          Play                     0x00000000000017B5
+          Forward                  0x00000000000017B4
+          Replay/SkipBackward      0x00000000000017A4
+          Pause                    0x00000000000017B0
+          SkipForward              0x000000000000179E
+          1                        0x0000000000001781
+          2                        0x0000000000001782
+          3                        0x0000000000001783
+          4                        0x0000000000001784
+          5                        0x0000000000001785
+          6                        0x0000000000001786
+          7                        0x0000000000001787
+          8                        0x0000000000001788
+          9                        0x0000000000001789
+          Asterix                  0x000000000000178A
+          0                        0x0000000000001780
+          #                        0x000000000000178E
+          Red                      0x000000000000178B
+          Green                    0x00000000000017AE
+          Yellow                   0x00000000000017B8
+          Blue                     0x00000000000017A9
+      end codes
+
+end remote
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre4(serial) on Sun Oct  2 00:24:32 2005
+#
+# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
+# members of linux user group Vorarlberg www.lugv.at
+# 
+# for ir remote controler from Hauppauge WinTV Nexus-S
+# most of the keys are supported
+#
+# brand:                       Hauppauge
+# model no. of remote control: WinTV Nexus-S
+# devices being controlled by this remote:
+#
+
+begin remote
+
+  name  Hauppauge_WinTV_Nexus-S
+  bits           13
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           944   828
+  zero          944   828
+  plead         980
+  gap          113932
+  min_repeat      1
+  toggle_bit      2
+
+
+      begin codes
+          Up                       0x0000000000001794
+          Down                     0x0000000000001795
+          Left                     0x0000000000001796
+          Right                    0x0000000000001797
+          Power                    0x00000000000017BD
+          Ok                       0x00000000000017A5
+          Menu                     0x000000000000178D
+          Back                     0x000000000000179F
+          Red                      0x000000000000178B
+          Green                    0x00000000000017AE
+          Yellow                   0x00000000000017B8
+          Blue                     0x00000000000017A9
+          0                        0x0000000000001780
+          1                        0x0000000000001781
+          2                        0x0000000000001782
+          3                        0x0000000000001783
+          4                        0x0000000000001784
+          5                        0x0000000000001785
+          6                        0x0000000000001786
+          7                        0x0000000000001787
+          8                        0x0000000000001788
+          9                        0x0000000000001789
+          Play                     0x00000000000017B5
+          Pause                    0x00000000000017B0
+          Stop                     0x00000000000017B6
+          Record                   0x00000000000017B7
+          FastFwd                  0x00000000000017B4
+          FastRwd                  0x00000000000017B2
+          Channel+                 0x00000000000017A0
+          Channel-                 0x00000000000017A1
+          Volume+                  0x0000000000001790
+          Volume-                  0x0000000000001791
+          Mute                     0x000000000000178F
+          Timers                   0x000000000000178A
+          Recordings               0x000000000000178E
+          Back                     0x000000000000179F
+          Record                   0x00000000000017B7
+          Pause                    0x00000000000017B0
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
new file mode 100644
index 0000000..d0f36e8
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
@@ -0,0 +1,33 @@
+# 
+# lircmd config file
+# 
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * RESERVED
+
+MOVE_N  * 2
+MOVE_NE * 3
+MOVE_E  * 6
+MOVE_SE * 9
+MOVE_S  * 8
+MOVE_SW * 7
+MOVE_W  * 4
+MOVE_NW * 1
+MOVE_IN * CH+
+MOVE_OUT * CH-
+
+BUTTON1_TOGGLE * 5
+BUTTON1_TOGGLE * RADIO
+BUTTON2_TOGGLE * VOL+
+BUTTON3_TOGGLE * SOURCE
+
+BUTTON1_CLICK * TV
+BUTTON1_CLICK * VOL-
+BUTTON3_CLICK * MUTE
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg
new file mode 100644
index 0000000..a40a1e8
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf
new file mode 100644
index 0000000..97bbf4c
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf
@@ -0,0 +1,88 @@
+# Please make this file available to others

+# by sending it to <lirc@bartelmus.de>

+#

+# this config file was automatically generated

+# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006
+#

+# contributed by M.Brakemeier
+#

+# brand:                       SoundGraph
+# model no. of remote control: iMON-PAD

+# devices being controlled by this remote:

+#

+

+begin remote

+

+  name     iMON-PAD

+  bits           32

+  eps            30

+  aeps          100

+

+  one             0     0

+  zero            0     0

+  gap          235965

+  min_repeat      1

+  toggle_bit      0

+

+      begin codes

+          AppExit                  0x288195B7

+        Power                    0x289115B7
+          Record                   0x298115B7

+          Play                     0x2A8115B7

+	  Open			   0x29B1d5B7
+          Rewind                   0x2A8195B7

+          Pause                    0x2A9115B7

+          FastForward              0x2B8115B7

+          PrevChapter              0x2B9115B7

+          Stop                     0x2B9715B7

+          NextChapter              0x298195B7

+          Esc                      0x2BB715B7

+          Eject                    0x299395B7

+          AppLauncher              0x29B715B7

+          MultiMon                 0x2AB195B7

+          TaskSwitcher             0x2A9395B7

+          Mute                     0x2B9595B7

+          Vol+                     0x28A395B7

+          Vol-                     0x28A595B7

+          Ch+                      0x289395B7

+          Ch-                      0x288795B7

+          Timer                    0x2B8395B7

+          1                        0x28B595B7

+          2                        0x2BB195B7

+          3                        0x28B195B7

+          4                        0x2A8595B7

+          5                        0x299595B7

+          6                        0x2AA595B7

+          7                        0x2B9395B7

+          8                        0x2A8515B7

+          9                        0x2AA115B7

+          0                        0x2BA595B7

+          ShiftTab                 0x28B515B7

+          Tab                      0x29A115B7

+        Red                      0x2B8515B7 # MyMovie
+        Green                    0x299195B7 # MyMusic
+        Blue                     0x2BA115B7 # MyPhoto
+        Yellow                   0x28A515B7 # MyTV
+          Bookmark                 0x288515B7

+          Thumbnail                0x2AB715B7

+          AspectRatio              0x29A595B7

+          FullScreen               0x2AA395B7

+        Purple                   0x29A295B7 # MyDVD
+          Menu                     0x2BA385B7

+          Caption                  0x298595B7

+          Language                 0x2B8595B7

+          MouseKeyboard            0x299115B7

+          SelectSpace              0x2A9315B7

+          MouseMenu                0x28B715B7

+          MouseRightClick          0x688481B7

+          Enter                    0x28A195B7

+          MouseLeftClick           0x688301B7

+          WindowsKey               0x2B8195B7

+          Backspace                0x28A115B7

+        Mouse_N                  0x690281B7
+        Mouse_S                  0x688291B7
+        Mouse_W                  0x6A8281B7
+        Mouse_E                  0x688A81B7
+      end codes

+

+end remote 

diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc
new file mode 100644
index 0000000..3ad34d8
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc
@@ -0,0 +1,240 @@
+###################################
+# lircrc config as used by Stev391 June 2007
+# Not all of the buttons are configured yet, only the commonly used buttons
+###################################
+
+# Escape
+begin
+    prog = mythtv
+    button = AppExit
+    config = Esc
+    repeat = 3
+end
+
+# Escape Key 2
+begin
+    prog = mythtv
+    button = Esc
+    config = Esc
+end
+
+# Channel Up
+begin
+    prog   = mythtv
+    button = Ch+
+    config = Up
+    repeat = 3
+end
+
+# Channel Down
+begin
+    prog   = mythtv
+    button = Ch-
+    config = Down
+    repeat = 3
+end
+
+# Volume Up
+begin
+    prog = mythtv
+    button = Vol+
+    repeat = 3
+    config = Right
+end
+
+# Volume Down
+begin
+    prog = mythtv
+    button = Vol-
+    repeat = 3
+    config = Left
+end
+
+# Enter/Return
+begin
+    prog   = mythtv
+    button = Enter
+    config = Return
+end
+
+# Menu Button
+begin
+    prog = mythtv
+    button = Menu
+    config = M
+end
+
+# Mute
+begin
+    prog = mythtv
+    button = Mute
+    config = F9  
+end
+
+# Rewind
+begin
+    prog = mythtv
+    button = Rewind
+    config = PgUp  
+end
+
+# Fast Forward
+begin
+    prog = mythtv
+    button = FastForward
+    config = PgDown  
+end
+
+# Play
+begin
+    prog = mythtv
+    button = Play
+    config = P  
+end
+
+# Pause
+begin
+    prog = mythtv
+    button = Pause
+    config = P  
+end
+
+# Record
+begin
+  prog = mythtv
+  button = Record
+  config = R  
+end
+
+# Stop
+begin
+   prog = mythtv
+   button = Stop
+   config = O  
+end
+
+# Previous Track/Chapter
+begin
+   prog = mythtv
+   button = PrevChapter
+   config = Home  
+end
+
+# Next Track/Chapter
+begin
+   prog = mythtv
+   button = NextChapter
+   config = End
+end
+
+# Jump Point to MythVideo
+begin
+   prog = mythtv
+   button = MyMovie
+   config = F12
+end
+
+# Jump Point to MythMusic
+begin
+   prog = mythtv
+   button = MyMusic
+   config = F11
+end
+
+# Jump Point to LiveTV
+begin
+   prog = mythtv
+   button = MyTV
+   config = F10
+end
+
+# Jump Point to Main Menu
+begin
+   prog = mythtv
+   button = Multimon
+   config = F2
+end
+
+# Jump Point to Myth Gallery
+begin
+   prog = mythtv
+   button = MyPhoto
+   config = F3
+end
+
+# Jump Point to Play DVD
+begin
+   prog = mythtv
+   button = MyDVD
+   config = F4
+end
+
+# Display Information
+begin
+   prog = mythtv
+   button = Caption
+   config = I
+end
+
+##############################
+# Numbers
+##############################
+begin
+    prog = mythtv
+    button = 0
+    config = 0  
+end
+
+begin
+    prog = mythtv
+    button = 1
+    config = 1  
+end
+
+begin
+    prog = mythtv
+    button = 2
+    config = 2  
+end
+
+begin
+    prog = mythtv
+    button = 3
+    config = 3  
+end
+
+begin
+    prog = mythtv
+    button = 4
+    config = 4  
+end
+
+begin
+    prog = mythtv
+    button = 5
+    config = 5  
+end
+
+begin
+    prog = mythtv
+    button = 6
+    config = 6  
+end
+
+begin
+    prog = mythtv
+    button = 7
+    config = 7  
+end
+
+begin
+    prog = mythtv
+    button = 8
+    config = 8  
+end
+
+begin
+    prog = mythtv
+    button = 9
+    config = 9  
+end
diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg
new file mode 100644
index 0000000..47368c5
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
new file mode 100644
index 0000000..ec3b73e
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
@@ -0,0 +1,88 @@
+#
+# RC-6 config file
+#
+# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
+#         http://home.hccnet.nl/m.majoor/pronto.pdf
+#
+# used by: Philips
+#
+#########
+#
+# Philips Media Center Edition remote control
+# For use with the USB MCE ir receiver
+#
+# Dan Conti  dconti|acm.wwu.edu
+#
+# Radio, Print, RecTV are only available on the HP Media Center remote control
+#
+
+begin remote
+
+  name mceusb
+  bits           16
+  flags RC6|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  header       2667   889
+  one           444   444
+  zero          444   444
+  pre_data_bits 21
+  pre_data      0x37FF0
+  gap          105000
+  toggle_bit     22
+  rc6_mask     0x100000000
+
+
+      begin codes
+
+# starts at af
+        Radio    0x00007baf
+        Print    0x00007bb1
+        Videos   0x00007bb5
+        Pictures 0x00007bb6
+        RecTV    0x00007bb7
+        Music    0x00007bb8
+        TV       0x00007bb9
+# no ba - d8
+        Guide    0x00007bd9
+        LiveTV   0x00007bda
+        DVD      0x00007bdb
+        Back     0x00007bdc
+        OK       0x00007bdd
+        Right    0x00007bde
+        Left     0x00007bdf
+        Down     0x00007be0
+        Up       0x00007be1
+# no e2,e3
+        Replay   0x00007be4
+        Skip     0x00007be5
+        Stop     0x00007be6
+        Pause    0x00007be7
+        Record   0x00007be8
+        Play     0x00007be9
+        Rewind   0x00007bea
+        Forward  0x00007beb
+        ChanDown 0x00007bec
+        ChanUp   0x00007bed
+        VolDown  0x00007bee
+        VolUp    0x00007bef
+        More     0x00007bf0
+        Mute     0x00007bf1
+        Home     0x00007bf2
+        Power    0x00007bf3
+        Enter    0x00007bf4
+        Clear    0x00007bf5
+        Nine     0x00007bf6
+        Eight    0x00007bf7
+        Seven    0x00007bf8
+        Six      0x00007bf9
+        Five     0x00007bfa
+        Four     0x00007bfb
+        Three    0x00007bfc
+        Two      0x00007bfd
+        One      0x00007bfe
+        Zero     0x00007bff
+      end codes
+
+end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb
new file mode 100644
index 0000000..3738bfa
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb
@@ -0,0 +1,393 @@
+# lircrc.mceusb
+
+###################
+#
+#  MythTV
+#
+###################
+begin
+    prog = mythtv
+    button = One
+    config = 1  
+end
+
+begin
+    prog = mythtv
+    button = Two
+    config = 2  
+end
+
+begin
+    prog = mythtv
+    button = Three
+    config = 3  
+end
+
+begin
+    prog = mythtv
+    button = Four
+    config = 4  
+end
+
+begin
+    prog = mythtv
+    button = Five
+    config = 5  
+end
+
+begin
+    prog = mythtv
+    button = Six
+    config = 6  
+end
+
+begin
+    prog = mythtv
+    button = Seven
+    config = 7  
+end
+
+begin
+    prog = mythtv
+    button = Eight
+    config = 8  
+end
+
+begin
+    prog = mythtv
+    button = Nine
+    config = 9  
+end
+
+begin
+    prog = mythtv
+    button = Zero
+    config = 0  
+end
+
+begin
+    prog = mythtv
+    button = Back
+    config = Esc
+end
+
+begin
+    prog = mythtv
+    button = Guide
+    config = M  
+end
+
+begin
+   prog = mythtv
+   button = More
+   config = I  
+end
+
+begin
+  prog = mythtv
+  button = VolDown
+  config = F10  
+end
+
+begin
+  prog = mythtv
+  button = VolUp
+  config = F11  
+end
+
+begin
+    prog = mythtv
+    button = Up
+    config = Up
+end
+
+begin
+    prog = mythtv
+    button = Down
+    config = Down
+end
+
+begin
+    prog = mythtv
+    button = Left
+    config = Left
+end
+
+begin
+    prog = mythtv
+    button = Right
+    config = Right
+end
+
+begin
+    prog = mythtv
+    button = Play
+    config = Return
+end
+
+begin
+    prog = mythtv
+    button = OK
+    config = Return
+end
+
+begin
+    prog = mythtv
+    button = Mute
+    config = |  
+end
+
+begin
+    prog = mythtv
+    button = Rewind
+    config = Left  
+end
+
+begin
+    prog = mythtv
+    button = Forward
+    config = Right  
+end
+
+begin
+  prog = mythtv
+  button = Record
+  config = R  
+end
+
+begin
+   prog = mythtv
+   button = Stop
+   config = O  
+end
+
+begin
+    prog = mythtv
+    button = Pause
+    config = P  
+end
+
+# Use for backwards commercial skip
+begin
+   prog = mythtv
+   button = Replay
+   config = Q  
+end
+
+# Use for forward commercial skip
+begin
+   prog = mythtv
+   button = Skip
+   config = Z  
+end
+
+
+###################
+#
+#  MPlayer
+#
+###################
+begin
+   prog = mplayer
+   button = Stop
+   config = quit
+end
+
+begin
+   prog = mplayer
+   button = Play
+   config = seek +1
+end
+		   
+begin
+   prog = mplayer
+   button = More
+   config = osd
+end
+			      
+begin
+   prog = mplayer
+   button = Replay
+   config = seek -10
+   repeat = 1
+end
+							     
+begin
+   prog = mplayer
+   button = Skip
+   config = seek +10
+   repeat = 1
+end
+
+begin
+   prog = mplayer
+   button = Rewind
+   config = seek -30
+   repeat = 1
+end
+
+begin
+   prog = mplayer
+   button = Forward
+   config = seek +30
+   repeat = 1
+end
+
+begin
+    prog = mplayer
+    button = Pause
+    config = pause
+end
+								    
+begin
+   prog = mplayer
+   button = VolUp
+   config = volume +1
+   repeat = 1
+end
+
+begin
+   prog = mplayer
+   button = VolDown
+   config = volume -1
+   repeat = 1
+end
+
+begin
+   prog = mplayer
+   button = Mute
+   config = mute
+end
+
+###################
+#
+#  Xine
+#
+###################
+# Xine lirc setup
+begin
+prog = xine
+button = Play
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = Stop
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = Back
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = Pause
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = Up
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = Down
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = Left
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = Right
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = Home
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = Forward
+repeat = 3
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = Rewind
+repeat = 3
+config = SpeedSlower
+end
+
+begin
+prog = xine
+button = VolUp
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VolDown
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = Mute
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = ChanUp
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = ChanDown
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = More
+repeat = 3
+config = OSDStreamInfos
+end 
+
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg b/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg
new file mode 100644
index 0000000..0aa6a4a
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg b/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg
new file mode 100644
index 0000000..1d887dd
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/receiver_usb.id b/abs/core-testing/live-installer/templates/remotes/receiver_usb.id
new file mode 100644
index 0000000..b99f91b
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/receiver_usb.id
@@ -0,0 +1,4 @@
+0bc7:0005	snapstream_firefly	X10 Wireless Technology, Inc.
+0e9c:0000	streamzap	Streamzap, Inc. Streamzap Remote Control
+0471:0815	mceusb	Microsoft usb receiver_transmitter rc6
+	
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
new file mode 100644
index 0000000..288bb51
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
@@ -0,0 +1,127 @@
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005
+#
+# contributed by
+#
+# brand: Snapstream Firefly Remote
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+name Snapstream_Firefly
+bits 40
+eps 30
+aeps 100
+
+one 0 0
+zero 0 0
+gap 219964
+toggle_bit 0
+
+
+begin codes
+MAXI 0x0000001481AC0000
+MAXI 0x00000014012C0000
+CLOSE 0x00000014D7020000
+CLOSE 0x0000001457820000
+1 0x00000014628D0000
+1 0x00000014E20D0000
+2 0x00000014E30E0000
+2 0x00000014638E0000
+3 0x00000014648F0000
+3 0x00000014E40F0000
+4 0x00000014E5100000
+4 0x0000001465900000
+5 0x0000001466910000
+5 0x00000014E6110000
+6 0x00000014E7120000
+6 0x0000001467920000
+7 0x0000001468930000
+7 0x00000014E8130000
+8 0x00000014E9140000
+8 0x0000001469940000
+9 0x000000146A950000
+9 0x00000014EA150000
+0 0x00000014EC170000
+0 0x000000146C970000
+BACK 0x000000146B960000
+BACK 0x00000014EB160000
+ENT 0x00000014ED180000
+ENT 0x000000146D980000
+VOL+ 0x000000145E890000
+VOL+ 0x00000014DE090000
+VOL- 0x000000145D880000
+VOL- 0x00000014DD080000
+MUTE 0x000000145F8A0000
+MUTE 0x00000014DF0A0000
+FIREFLY 0x0000001455800000
+FIREFLY 0x00000014D5000000
+CH+ 0x00000014608B0000
+CH+ 0x00000014E00B0000
+CH- 0x00000014618C0000
+CH- 0x00000014E10C0000
+INFO 0x0000001483AE0000
+INFO 0x00000014032E0000
+OPTION 0x0000001484AF0000
+OPTION 0x00000014042F0000
+UP 0x000000146F9A0000
+UP 0x00000014EF1A0000
+LEFT 0x00000014729D0000
+LEFT 0x00000014F21D0000
+DOWN 0x0000001477A20000
+DOWN 0x00000014F7220000
+RIGHT 0x00000014749F0000
+RIGHT 0x00000014F41F0000
+OK 0x00000014739E0000
+OK 0x00000014F31E0000
+MENU 0x00000014719C0000
+MENU 0x00000014F11C0000
+EXIT 0x0000001475A00000
+EXIT 0x00000014F5200000
+REC 0x00000014FC270000
+REC 0x000000147CA70000
+PLAY 0x00000014FA250000
+PLAY 0x000000147AA50000
+STOP 0x00000014FD280000
+STOP 0x000000147DA80000
+REW 0x00000014F9240000
+REW 0x0000001479A40000
+FWD 0x00000014FB260000
+FWD 0x000000147BA60000
+PREV 0x00000014002B0000
+PREV 0x0000001480AB0000
+PAUSE 0x00000014FE290000
+PAUSE 0x000000147EA90000
+NEXT 0x00000014FF2A0000
+NEXT 0x000000147FAA0000
+MUSIC 0x00000014DB060000
+MUSIC 0x000000145B860000
+PHOTOS 0x00000014DA050000
+PHOTOS 0x000000145A850000
+DVD 0x00000014D9040000
+DVD 0x0000001459840000
+TV 0x00000014D8030000
+TV 0x0000001458830000
+VIDEO 0x00000014DC070000
+VIDEO 0x000000145C870000
+HELP 0x00000014D6010000
+HELP 0x0000001456810000
+MOUSE 0x00000014022D0000
+MOUSE 0x0000001482AD0000
+A 0x00000014EE190000
+A 0x000000146E990000
+B 0x00000014F01B0000
+B 0x00000014709B0000
+C 0x00000014F6210000
+C 0x0000001476A10000
+D 0x00000014F8230000
+D 0x0000001478A30000
+
+end codes
+
+end remote
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
new file mode 100644
index 0000000..e918011
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
@@ -0,0 +1,590 @@
+# ~/.mythtv/lircrc
+#
+# MythTV native LIRC config file for
+# the new grey Hauppauge remote
+#
+# Modified from Jarod Wilson's which came from Jeff Campbell's
+# By Brad Templeton
+
+
+# Here we have the jump point commands.  They only work if you have
+# defined function keys for these jump points.  For me the most
+# common command is the menu of recordings, so I put that on "videos"
+# even though that's counter-intuitive
+
+begin
+prog = mythtv
+button = TV
+repeat = 3
+config = F5
+end
+
+begin
+prog = mythtv
+button = Videos
+repeat = 3
+config = F2
+end
+
+# Not yet defined
+begin
+prog = mythtv
+button = Music
+repeat = 3
+config = Up
+end
+
+# Given another function for now, I don't use mythgallery
+begin
+prog = mythtv
+button = Pictures
+repeat = 3
+config = F
+end
+
+begin
+prog = mythtv
+button = Guide
+repeat = 3
+config = F3
+end
+
+# I stuck the "todo" list on here as Myth has no radio function
+begin
+prog = mythtv
+button = Radio
+repeat = 3
+config = F4
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = LEFT
+repeat = 3
+config = Left
+end
+
+begin
+prog = mythtv
+button = RIGHT
+repeat = 3
+config = Right
+end
+
+# Channel Up
+begin
+prog = mythtv
+button = Channel-UP
+repeat = 3
+config = Up
+end
+
+# Channel Down
+begin
+prog = mythtv
+button = Channel-DOWN
+repeat = 3
+config = Down
+end
+
+# OK/Select
+begin
+prog = mythtv
+button = Ok
+config = Space
+end
+
+# Play
+begin
+prog = mythtv
+button = Play
+config = Return
+end
+
+# Stop
+begin
+prog = mythtv
+button = Stop
+config = I
+end
+
+# Escape/Exit/Back
+begin
+prog = mythtv
+button = BACK
+config = Esc
+end
+
+# Power Off/Exit
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+
+# Pause
+begin
+prog = mythtv
+button = Pause
+repeat = 3
+config = P
+end
+
+# Mute
+begin
+prog = mythtv
+button = Mute
+repeat = 3
+config = |
+end
+
+# Fast forward (30 sec default)
+begin
+prog = mythtv
+button = Rewind
+repeat = 3
+config = PgUp
+end
+
+# Rewind (10 sec default)
+begin
+prog = mythtv
+button = Forward
+repeat = 3
+config = PgDown
+end
+
+# Skip forward (10 min default)
+begin
+prog = mythtv
+button = Next
+repeat = 3
+config = End
+end
+
+# Skip backward (10 min default)
+begin
+prog = mythtv
+button = Previous
+repeat = 3
+config = Home
+end
+
+# Record
+begin
+prog = mythtv
+button = Record
+repeat = 3
+config = R
+end
+
+# Delete
+begin
+prog = mythtv
+button = Red
+repeat = 3
+config = D
+end
+
+# Decrease play speed
+begin
+prog = mythtv
+button = Green
+repeat = 3
+config = J
+end
+
+# Display EPG while in live TV,
+# View selected show while in EPG
+begin
+prog = mythtv
+button = Menu
+repeat = 3
+config = M
+end
+
+# Scroll up
+begin
+prog = mythtv
+button = Volume-UP
+repeat = 3
+config = F11
+end
+
+# Scroll down
+begin
+prog = mythtv
+button = Volume-DOWN
+repeat = 3
+config = F10
+end
+
+# Bring up OSD info
+begin
+prog = mythtv
+button = Go
+repeat = 3
+config = I
+end
+
+# Change display aspect ratio
+begin
+prog = mythtv
+button = Prev-Channel
+repeat = 3
+config = W
+end
+
+# double speed watch
+begin
+prog = mythtv
+button = Yellow
+repeat = 3
+config = J
+end
+
+# change tuners
+#begin
+#prog = mythtv
+#button = hash
+#repeat = 3
+#config = Y
+#end
+
+# Bring up Time stretch
+begin
+prog = mythtv
+button = Blue
+repeat = 3
+config = Y
+end
+
+# Numbers 0-9
+
+begin
+prog = mythtv
+button = 0
+repeat = 3
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+repeat = 3
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+repeat = 3
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+repeat = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+repeat = 3
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+repeat = 3
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+repeat = 3
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+repeat = 3
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+repeat = 3
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+repeat = 3
+config = 9
+end
+
+
+### MPlayer lirc setup
+
+# Show OSD
+begin
+prog = mplayer
+button = MENU
+repeat = 3
+config = osd
+end
+
+# Pause playback
+begin
+prog = mplayer
+button = PAUSE
+repeat = 3
+config = pause
+end
+
+# Skip ahead a minute if playing
+# If paused, resume playing
+begin
+prog = mplayer
+button = PLAY
+repeat = 3
+config = seek +1
+end
+
+# Stop playback and exit
+begin
+prog = mplayer
+button = Back
+repeat = 3
+config = quit
+end
+
+# Mute
+begin
+prog = mplayer
+button = MUTE
+repeat = 3
+config = mute
+end
+
+# Seek back 10 seconds
+begin
+prog = mplayer
+button = LEFT
+repeat = 3
+config = seek -7
+end
+
+# Seek forward 30 seconds
+begin
+prog = mplayer
+button = RIGHT
+repeat = 3
+config = seek +30
+end
+
+# Quit
+begin
+prog = mplayer
+button = EXIT
+repeat = 3
+config = quit
+end
+
+# Seek forward 10 minutes
+begin
+prog = mplayer
+button = SKIP
+repeat = 3
+config = seek +600
+end
+
+# Seek backward 10 minutes
+begin
+prog = mplayer
+button = REPLAY
+repeat = 3
+config = seek -600
+end
+
+# Toggle full-screen
+begin
+prog = mplayer
+button = FULL
+repeat = 3
+config = vo_fullscreen
+end
+
+### Xine lirc setup
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = OFF
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = CH+
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = CH-
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = VOL-
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = VOL+
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = BACK
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = FFW
+repeat = 3
+#config = SpeedFaster
+config = SeekRelative+60
+end
+
+begin
+prog = xine
+button = REW
+repeat = 3
+#config = SpeedSlower
+config = SeekRelative-60
+end
+
+begin
+prog = xine
+button = FULL
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = BLANK
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = SKIP
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = REPLAY
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = GO
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = RED
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = RED
+repeat = 3
+config = Quit
+end
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg
new file mode 100644
index 0000000..a1fbc6e
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
new file mode 100644
index 0000000..8e453b9
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
@@ -0,0 +1,69 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand:                       Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+  name  Streamzap_PC_Remote
+  bits            6
+  flags RC5|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  one           889  889
+  zero          889  889
+  plead         889
+  pre_data_bits   8
+  pre_data       0xA3
+  gap          108344
+  toggle_bit      2
+
+
+      begin codes
+          0                        0x00
+          1                        0x01
+          2                        0x02
+          3                        0x03
+          4                        0x04
+          5                        0x05
+          6                        0x06
+          7                        0x07
+          8                        0x08
+          9                        0x09
+          POWER                    0x0A
+          MUTE                     0x0B
+          CH_UP                    0x0C
+          VOL_UP                   0x0D
+          CH_DOWN                  0x0E
+          VOL_DOWN                 0x0F
+          UP                       0x10
+          LEFT                     0x11
+          OK                       0x12
+          RIGHT                    0x13
+          DOWN                     0x14
+          MENU                     0x15
+          EXIT                     0x16
+          PLAY                     0x17
+          PAUSE                    0x18
+          STOP                     0x19
+          |<<                      0x1A
+          >>|                      0x1B
+          RECORD                   0x1C
+          <<                       0x1D
+          >>                       0x1E
+          RED                      0x20
+          GREEN                    0x21
+          YELLOW                   0x22
+          BLUE                     0x23
+      end codes
+
+end remote
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc b/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc
new file mode 100755
index 0000000..5e668b5
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc
@@ -0,0 +1,832 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+        remote = RS_LD
+        button = RESET
+        prog   = irexec
+        repeat = 0
+        config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+        remote = RS_LD
+        button = TIME
+        prog   = irexec
+        repeat = 10
+        config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+        remote = RS_LD
+        button = BLANK
+        prog   = irexec
+        repeat = 0
+#      config  = ls
+        config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 4
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote =  Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+end
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = i
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+    prog = mplayer
+    button = pause
+    config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine  commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+        button = DELETE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+        button = PICTURE
+        prog   = xine
+        repeat = 4
+        config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button =  >>
+repeat = 4
+#config = SeekRelative+30
+config =  SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config =  SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config =  SeekRelative-1200
+end
+
+begin
+prog   = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog   = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog   = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog   = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog   = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog   = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog   = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog   = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog   = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog   = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog   = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog   = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog   = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+  begin
+    prog = xmms
+    button = PLAY
+    config = PLAY
+  end
+  begin
+    prog = xmms
+    button = clear
+    config = PLAYLIST_CLEAR
+  end
+  begin
+    prog = xmms
+    button = load
+    config = PLAYLIST_ADD .xmms/xmms.m3u
+   end
+  begin
+    prog = xmms
+    button = PAUSE
+    config = PAUSE
+  end
+  begin
+    prog = xmms
+    button = STOP
+    config = STOP
+  end
+  begin
+    prog = xmms
+    button = EXIT
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = POWER
+    config = QUIT
+    flags = mode
+  end
+
+  begin
+    prog = xmms
+    button = CH_UP
+    config = NEXT
+  end
+  begin
+    prog = xmms
+    button = CH_DOWN
+    config = PREV
+  end
+  
+
+
+begin
+    prog = xmms
+    button = >>|
+    config = NEXT
+  end
+begin
+    prog = xmms
+    button = |<<
+    config = PREV
+end
+
+
+begin
+    prog = xmms
+    button = <<
+    config = FWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = <<
+    config = BWD 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = volup
+    config = VOL_UP 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = voldown
+    config = VOL_DOWN 10
+    repeat = 2
+  end
+  begin
+    prog = xmms
+    button = 1
+    config = ONE
+  end
+  begin
+    prog = xmms
+    button = 2
+    config = TWO
+  end
+  begin
+    prog = xmms
+    button = 3
+    config = THREE
+  end
+  begin
+    prog = xmms
+    button = 4
+    config = FOUR
+  end
+  begin
+    prog = xmms
+    button = 5
+    config = FIVE
+  end
+  begin
+    prog = xmms
+    button = 6
+    config = SIX
+  end
+  begin
+    prog = xmms
+    button = 7
+    config = SEVEN
+  end
+  begin
+    prog = xmms
+    button = 8
+    config = EIGHT
+  end
+  begin
+    prog = xmms
+    button = 9
+    config = NINE
+  end
+  begin
+    prog = xmms
+    button = 0
+    config = ZERO
+  end
+  begin
+    prog = xmms
+    button = enter
+    config = SETPOS
+  end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg
new file mode 100644
index 0000000..4d1a5fe
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.home b/abs/core-testing/live-installer/templates/samba/smb.conf.home
new file mode 100755
index 0000000..b850a7d
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/samba/smb.conf.home
@@ -0,0 +1,10 @@
+[home]
+   path = /data/home/mythtv/
+   public = yes
+   only guest = yes
+   writeable  = yes
+   printable = no
+  force user = mythtv
+  force group = mythtv
+  create mask = 0755
+
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.media b/abs/core-testing/live-installer/templates/samba/smb.conf.media
new file mode 100755
index 0000000..6a4ec91
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/samba/smb.conf.media
@@ -0,0 +1,10 @@
+[media]
+   path = /data/media
+   public = yes
+   only guest = yes
+   writeable  = yes
+   printable = no
+  force user = mythtv
+  force group = mythtv
+  create mask = 0755
+
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.template b/abs/core-testing/live-installer/templates/samba/smb.conf.template
new file mode 100644
index 0000000..42ddb99
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/samba/smb.conf.template
@@ -0,0 +1,125 @@
+#
+#======================= Global Settings =====================================
+[global]
+
+   workgroup = home_lan
+   server string = MythVantage
+
+# Security mode. Defines in which mode Samba will operate. Possible 
+# values are share, user, server, domain and ads. Most people will want 
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = share
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+   load printers = no
+
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
+;   password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+;   local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+;   os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+;   domain master = yes 
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+;   preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for 
+# Windows95 workstations. 
+;   domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+;   logon script = %m.bat
+# run a specific logon batch file per username
+;   logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+   dns proxy = no 
+
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+
+
diff --git a/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt
new file mode 100644
index 0000000..f82f2d2
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt
@@ -0,0 +1,209 @@
+context	action	description	keylist	hostname
+Music	FFWD	Fast forward	PgDown	REPLACEME
+Music	STOP	Stop playback	O	REPLACEME
+Music	MUTE	Mute	|,\\\\,F9	REPLACEME
+Gallery	SCROLLUP	Scroll image up	2	REPLACEME
+Music	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
+Music	VOLUMEUP	Volume up	],},F11	REPLACEME
+qt	DELETE	Delete	D	REPLACEME
+Music	RWND	Rewind	PgUp	REPLACEME
+qt	EDIT	Edit	E	REPLACEME
+Music	PAUSE	Pause/Start playback	P	REPLACEME
+Gallery	RECENTER	Recenter image	5	REPLACEME
+Gallery	FULLSIZE	Full-size (un-zoom) image	0	REPLACEME
+Gallery	LOWRIGHT	Go to the lower-right corner of the image	PgDown	REPLACEME
+Gallery	SCROLLRIGHT	Scroll image right	6	REPLACEME
+Gallery	MENU	Toggle activating menu in thumbnail view	M	REPLACEME
+Gallery	SCROLLDOWN	Scroll image down	8	REPLACEME
+Gallery	ZOOMIN	Zoom image in	9	REPLACEME
+Gallery	UPLEFT	Go to the upper-left corner of the image	PgUp	REPLACEME
+Gallery	RANDOMSHOW	Start Random Slideshow in thumbnail view	R	REPLACEME
+Gallery	ROTLEFT	Rotate image left 90 degrees	[,1	REPLACEME
+Gallery	SLIDESHOW	Start Slideshow in thumbnail view	S	REPLACEME
+Gallery	ROTRIGHT	Rotate image right 90 degrees	],3	REPLACEME
+Gallery	END	Go to the last image in thumbnail view	End	REPLACEME
+Gallery	HOME	Go to the first image in thumbnail view	Home	REPLACEME
+Gallery	SCROLLLEFT	Scroll image left	4	REPLACEME
+Gallery	PLAY	Start/Stop Slideshow	P	REPLACEME
+NetFlix	REMOVE	Removes movie from queue	D	REPLACEME
+Archive	TOGGLECUT	Toggle use cut list state for selected program	C	REPLACEME
+Gallery	ZOOMOUT	Zoom image out	7	REPLACEME
+NetFlix	MOVETOTOP	Moves movie to top of queue	1	REPLACEME
+Global	DOWN	Down Arrow	Down	REPLACEME
+ITV Menu	MENUTEXT	Menu Text	F7	REPLACEME
+ITV Menu	TEXTEXIT	Menu Exit	F6	REPLACEME
+Global	LEFT	Left Arrow	Left	REPLACEME
+Global	RIGHT	Right Arrow	Right	REPLACEME
+Global	UP	Up Arrow	Up	REPLACEME
+Global	MENU	Pop-up menu	M	REPLACEME
+Global	PREVVIEW	Previous View	Home	REPLACEME
+Global	ESCAPE	Escape	Esc	REPLACEME
+Global	PAGEUP	Page Up	PgUp	REPLACEME
+Global	SELECT	Select	Return,Enter,Space	REPLACEME
+Global	HELP	Help	F1	REPLACEME
+Global	INFO	More information	I	REPLACEME
+Global	NEXTVIEW	Next View	End	REPLACEME
+ITV Menu	MENUBLUE	Menu Blue	F5	REPLACEME
+Global	PAGEDOWN	Page Down	PgDown	REPLACEME
+Global	EJECT	Eject Removable Media		REPLACEME
+Global	3	3	3	REPLACEME
+Global	1	1	1	REPLACEME
+Global	6	6	6	REPLACEME
+Global	0	0	0	REPLACEME
+Global	2	2	2	REPLACEME
+Global	4	4	4	REPLACEME
+TV Frontend	DELETE	Delete Program	D	REPLACEME
+Global	8	8	8	REPLACEME
+Global	7	7	7	REPLACEME
+TV Frontend	PAGEDOWN	Page Down	9	REPLACEME
+TV Frontend	PAGEUP	Page Up	3	REPLACEME
+Global	5	5	5	REPLACEME
+TV Frontend	CHANGERECGROUP	Change Recording Group		REPLACEME
+Global	9	9	9	REPLACEME
+Video	END	Go to the last video	End	REPLACEME
+Video	INCPARENT	Increase Parental Level	],},F11	REPLACEME
+Weather	PAUSE	Pause current page	P	REPLACEME
+TV Frontend	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
+Video	BROWSE	Change browsable in video manager	B	REPLACEME
+Welcome	SHOWSETTINGS	Show Mythshutdown settings	F11	REPLACEME
+Video	HOME	Go to the first video	Home	REPLACEME
+Video	FILTER	Open video filter dialog	F	REPLACEME
+Welcome	STARTXTERM	Open an Xterm window	F12	REPLACEME
+Music	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
+Music	BLANKSCR	Blank screen	5	REPLACEME
+Video	DELETE	Delete video	D	REPLACEME
+Music	THMBUP	Increase rating	9	REPLACEME
+Music	CYCLEVIS	Cycle visualizer mode	6	REPLACEME
+Teletext Menu	REVEAL	Reveal hidden Text	F8	REPLACEME
+Music	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
+TV Frontend	PLAYBACK	Play Program	P	REPLACEME
+News	FORCERETRIEVE	Force update news items	M	REPLACEME
+Video	DECPARENT	Decrease Parental Level	[,{,F10	REPLACEME
+News	RETRIEVENEWS	Update news items	I	REPLACEME
+News	CANCEL	Cancel news item updating	C	REPLACEME
+Teletext Menu	TOGGLEBACKGROUND	Toggle Background	F7	REPLACEME
+Teletext Menu	MENUWHITE	Menu White	F6	REPLACEME
+ITV Menu	MENURED	Menu Red	F2	REPLACEME
+ITV Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
+ITV Menu	MENUGREEN	Menu Green	F3	REPLACEME
+Teletext Menu	PREVSUBPAGE	Previous Subpage	Left	REPLACEME
+Teletext Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
+Teletext Menu	MENUGREEN	Menu Green	F3	REPLACEME
+Teletext Menu	NEXTSUBPAGE	Next Subpage	Right	REPLACEME
+Teletext Menu	MENUBLUE	Menu Blue	F5	REPLACEME
+Teletext Menu	TOGGLETT	Toggle Teletext	T	REPLACEME
+Teletext Menu	NEXTPAGE	Next Page	Down	REPLACEME
+TV Editing	LOADCOMMSKIP	Load cut list from commercial skips	Z,End	REPLACEME
+TV Editing	BIGJUMPREW	Jump back 10x the normal amount	,,<	REPLACEME
+TV Editing	BIGJUMPFWD	Jump forward 10x the normal amount	>,.	REPLACEME
+TV Playback	JUMPTODVDROOTMENU	Jump to the DVD Root Menu		REPLACEME
+Teletext Menu	MENURED	Menu Red	F2	REPLACEME
+TV Playback	SIGNALMON	Monitor Signal Quality	F7	REPLACEME
+Teletext Menu	PREVPAGE	Previous Page	Up	REPLACEME
+TV Editing	INVERTMAP	Invert Begin/End cut points	I	REPLACEME
+TV Playback	PLAY	Play	Ctrl+P	REPLACEME
+TV Editing	PREVCUT	Jump to the previous cut point	PgUp	REPLACEME
+TV Editing	NEXTCUT	Jump to the next cut point	PgDown	REPLACEME
+TV Playback	CYCLECOMMSKIPMODE	Cycle Commercial Skip mode		REPLACEME
+TV Playback	TOGGLESLEEP	Toggle the Sleep Timer	F8	REPLACEME
+TV Playback	JUMPREC	Display menu of recorded programs to jump to		REPLACEME
+TV Playback	FINDER	Show the Program Finder	#	REPLACEME
+TV Playback	ADJUSTSTRETCH	Turn on time stretch control	A	REPLACEME
+TV Editing	CLEARMAP	Clear editing cut points	C,Q,Home	REPLACEME
+TV Editing	TOGGLEEDIT	Exit out of Edit Mode	E	REPLACEME
+TV Playback	TOGGLESTRETCH	Toggle time stretch speed		REPLACEME
+TV Playback	TOGGLERECCONTROLS	Recording picture adjustments for this recorder	G	REPLACEME
+TV Playback	TOGGLEAUDIOSYNC	Turn on audio sync adjustment controls		REPLACEME
+TV Playback	TOGGLEEDIT	Start Edit Mode	E	REPLACEME
+TV Playback	SPEEDINC	Increase the playback speed	U	REPLACEME
+TV Playback	STRETCHDEC	Decrease time stretch speed		REPLACEME
+TV Playback	SPEEDDEC	Decrease the playback speed	J	REPLACEME
+TV Playback	TOGGLECHANCONTROLS	Recording picture adjustments for this channel	Ctrl+G	REPLACEME
+TV Playback	GUIDE	Show the Program Guide	S	REPLACEME
+TV Playback	JUMPPREV	Jump to previously played recording		REPLACEME
+TV Playback	QUEUETRANSCODE	Queue the current recording for transcoding	X	REPLACEME
+TV Playback	STRETCHINC	Increase time stretch speed		REPLACEME
+TV Playback	TOGGLEPICCONTROLS	Playback picture adjustments	F	REPLACEME
+TV Playback	PREVCC708	Previous ATSC CC track		REPLACEME
+TV Playback	NEXTCC708	Next ATSC CC track		REPLACEME
+TV Playback	NEXTCC	Next of any captions		REPLACEME
+TV Playback	NEXTSCAN	Next video scan overidemode		REPLACEME
+TV Playback	NEXTCC608	Next VBI CC track		REPLACEME
+TV Playback	PREVCC608	Previous VBI CC track		REPLACEME
+TV Playback	PREVAUDIO	Previous audio track	-	REPLACEME
+TV Playback	PREVSUBTITLE	Previous subtitle track		REPLACEME
+TV Playback	NEXTSUBTITLE	Next subtitle track		REPLACEME
+TV Playback	NEXTAUDIO	Next audio track	+	REPLACEME
+TV Playback	SELECTCC708_3	Display ATSC CC4		REPLACEME
+TV Playback	SELECTCC708_0	Display ATSC CC1		REPLACEME
+TV Playback	SELECTCC608_1	Display VBI CC2		REPLACEME
+TV Playback	SELECTAUDIO_0	Play audio track 1		REPLACEME
+TV Playback	SELECTCC608_2	Display VBI CC3		REPLACEME
+TV Playback	TOGGLETTM	Toggle Teletext Menu		REPLACEME
+TV Playback	SELECTSUBTITLE_1	Display subtitle 2		REPLACEME
+TV Playback	SELECTCC608_3	Display VBI CC4		REPLACEME
+TV Playback	SELECTCC708_1	Display ATSC CC2		REPLACEME
+TV Playback	SELECTCC708_2	Display ATSC CC3		REPLACEME
+TV Playback	SELECTAUDIO_1	Play audio track 2		REPLACEME
+TV Playback	SELECTSUBTITLE_0	Display subtitle 1		REPLACEME
+TV Playback	TOGGLETTC	Toggle Teletext Captions		REPLACEME
+TV Playback	SELECTCC608_0	Display VBI CC1		REPLACEME
+TV Playback	SWAPPIP	Swap PiP/Main	N	REPLACEME
+TV Playback	TOGGLEASPECT	Toggle the display aspect ratio	W	REPLACEME
+TV Playback	TOGGLECC708	Toggle ATSC CC		REPLACEME
+TV Playback	TOGGLECC608	Toggle VBI CC		REPLACEME
+TV Playback	TOGGLEPIPMODE	Toggle Picture-in-Picture mode	V	REPLACEME
+TV Playback	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
+TV Playback	TOGGLEPIPWINDOW	Toggle active PiP window	B	REPLACEME
+TV Playback	MUTE	Mute	|,\\\\,F9	REPLACEME
+TV Playback	TOGGLEBROWSE	Toggle channel browse mode	O	REPLACEME
+TV Playback	TOGGLESUBTITLE	Toggle Subtitles		REPLACEME
+TV Playback	VOLUMEUP	Volume up	],},F11	REPLACEME
+TV Playback	TOGGLECC	Toggle any captions	T	REPLACEME
+TV Playback	JUMPSTART	Jump to the start of the recording.	Ctrl+B	REPLACEME
+TV Playback	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
+TV Playback	SKIPCOMMERCIAL	Skip Commercial	Z,End	REPLACEME
+TV Playback	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
+TV Playback	SWITCHCARDS	Switch Capture Cards	Y	REPLACEME
+TV Playback	SKIPCOMMBACK	Skip Commercial (Reverse)	Q,Home	REPLACEME
+TV Playback	TOGGLEINPUTS	Toggle Inputs	C	REPLACEME
+TV Playback	FFWDSTICKY	Fast Forward (Sticky) or Forward one frame while paused	>,.	REPLACEME
+TV Playback	JUMPFFWD	Jump ahead	PgDown	REPLACEME
+TV Playback	PREVCHAN	Switch to the previous channel	H	REPLACEME
+TV Playback	JUMPBKMRK	Jump to bookmark	K	REPLACEME
+TV Playback	RWNDSTICKY	Rewind (Sticky) or Rewind one frame while paused	,,<	REPLACEME
+TV Playback	NEXTFAV	Switch to the next favorite channel	/	REPLACEME
+TV Playback	JUMPRWND	Jump back	PgUp	REPLACEME
+TV Playback	SEEKRWND	Rewind	Left	REPLACEME
+TV Playback	SEEKFFWD	Fast Forward	Right	REPLACEME
+TV Playback	CHANNELDOWN	Channel down	Down	REPLACEME
+TV Playback	CHANNELUP	Channel up	Up	REPLACEME
+TV Playback	ARBSEEK	Arbitrary Seek	*	REPLACEME
+TV Playback	DELETE	Delete Program	D	REPLACEME
+TV Playback	CLEAROSD	Clear OSD	Backspace	REPLACEME
+TV Frontend	DETAILS	Show program details	U	REPLACEME
+TV Frontend	CUSTOMEDIT	Edit Custom Record Rule	E	REPLACEME
+TV Frontend	UPCOMING	List upcoming episodes	O	REPLACEME
+TV Frontend	CHANUPDATE	Switch channels without exiting guide in Live TV mode.	X	REPLACEME
+TV Frontend	RANKDEC	Decrease program or channel rank	Left	REPLACEME
+TV Frontend	VIEWCARD	Switch Capture Card view	Y	REPLACEME
+TV Playback	PAUSE	Pause	P	REPLACEME
+TV Frontend	RANKINC	Increase program or channel rank	Right	REPLACEME
+TV Frontend	PAGERIGHT	Page the program guide right	>,.	REPLACEME
+TV Frontend	PAGELEFT	Page the program guide left	,,<	REPLACEME
+TV Frontend	NEXTFAV	Toggle showing all channels or just favorites in the program guide.	/	REPLACEME
+Gallery	DELETE	Delete marked images or current image if none are marked	D	REPLACEME
+TV Frontend	DAYRIGHT	Page the program guide forward one day	End,1	REPLACEME
+Gallery	MARK	Mark image	T	REPLACEME
+Game	TOGGLEFAV	Toggle the current game as a favorite	?,/	REPLACEME
+TV Frontend	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
+TV Frontend	DAYLEFT	Page the program guide back one day	Home,7	REPLACEME
+Music	PREVTRACK	Move to the previous track	,,<,Q,Home	REPLACEME
+Game	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
+Music	DELETE	Delete track from playlist	D	REPLACEME
+Gallery	INFO	Toggle Showing Information about Image	I	REPLACEME
+Game	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
+Music	REFRESH	Refresh music tree	8	REPLACEME
+Music	NEXTTRACK	Move to the next track	>,.,Z,End	REPLACEME
+Music	FILTER	Filter All My Music	F	REPLACEME
+Music	THMBDOWN	Decrease rating	7	REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_1/settings.txt b/abs/core-testing/live-installer/templates/settings/default_1/settings.txt
new file mode 100644
index 0000000..8c3a391
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/settings/default_1/settings.txt
@@ -0,0 +1,320 @@
+value	data	hostname
+AC3PassThru	0	REPLACEME
+AggressiveSoundcardBuffer	0	REPLACEME
+AllowQuitShutdown	3	REPLACEME
+AltClearSavedPosition	1	REPLACEME
+AspectOverride	0	REPLACEME
+AudioNag	1	REPLACEME
+AudioOutputDevice	/dev/dsp	REPLACEME
+AutoCommercialSkip	2	REPLACEME
+AutoLookupCD	1	REPLACEME
+AutomaticSetWatched	0	REPLACEME
+AutoPlayCD	0	REPLACEME
+BackendServerPort	6543	REPLACEME
+BackendStatusPort	6544	REPLACEME
+CCBackground	0	REPLACEME
+CDBlankType	fast	REPLACEME
+CDCreateDir	1	REPLACEME
+CDDevice	/dev/cdrom	REPLACEME
+CDDiskSize	1	REPLACEME
+CDWriterEnabled	0	REPLACEME
+CDWriteSpeed	0	REPLACEME
+ChannelFormat	<num> <sign>	REPLACEME
+ChannelOrdering	channum	REPLACEME
+chanPerPage	5	REPLACEME
+ClearSavedPosition	1	REPLACEME
+CommNotifyAmount	0	REPLACEME
+CommRewindAmount	0	REPLACEME
+CustomFilters		REPLACEME
+DateFormat	ddd MMM d	REPLACEME
+DecodeExtraAudio	1	REPLACEME
+Default MythVideo View	1	REPLACEME
+DefaultCCMode	0	REPLACEME
+DefaultRipQuality	0	REPLACEME
+DefaultTVChannel	3	REPLACEME
+Deinterlace	1	REPLACEME
+DeinterlaceFilter	kerneldeint	REPLACEME
+DisplayGroupDefaultView	0	REPLACEME
+DisplayGroupTitleSort	0	REPLACEME
+DisplayRecGroup	Default	REPLACEME
+DispRecGroupAsAllProg	0	REPLACEME
+DTSPassThru	0	REPLACEME
+DVDDeviceLocation	/dev/dvd	REPLACEME
+DVDOnInsertDVD	1	REPLACEME
+DVDRipLocation	/data/media/tmp	REPLACEME
+EjectCDAfterRipping	1	REPLACEME
+EnableMHEG	0	REPLACEME
+EnableXbox	0	REPLACEME
+EnableXbox	0	REPLACEME
+EncoderType	ogg	REPLACEME
+EndOfRecordingExitPrompt	1	REPLACEME
+EPGFillType	10	REPLACEME
+EPGScrollType	1	REPLACEME
+EPGShowCategoryColors	1	REPLACEME
+EPGShowCategoryText	1	REPLACEME
+EPGShowChannelIcon	1	REPLACEME
+EPGShowFavorites	0	REPLACEME
+ExactSeeking	0	REPLACEME
+FFRewReposTime	100	REPLACEME
+FFRewReverse	1	REPLACEME
+FilenameTemplate	ARTIST/ALBUM/TRACK-TITLE	REPLACEME
+GalleryDir	/data/media/images	REPLACEME
+GalleryImportDirs	/mnt/cdrom:/mnt/camera	REPLACEME
+GalleryMoviePlayerCmd	mplayer -fs %s	REPLACEME
+GalleryOverlayCaption	0	REPLACEME
+GalleryRecursiveSlideshow	1	REPLACEME
+GallerySortOrder	20	REPLACEME
+GalleryThumbnailLocation	1	REPLACEME
+GameAllTreeLevels	system gamename	REPLACEME
+GameFavTreeLevels	gamename	REPLACEME
+GeneratePreviewPixmaps	0	REPLACEME
+GuiHeight	0	REPLACEME
+GuiOffsetX	0	REPLACEME
+GuiOffsetY	0	REPLACEME
+GuiSizeForTV	0	REPLACEME
+GuiVidModeResolution	640x480	REPLACEME
+GuiWidth	0	REPLACEME
+HideMouseCursor	1	REPLACEME
+HorizScanPercentage	0	REPLACEME
+Ignore_ID3	0	REPLACEME
+IndividualMuteControl	0	REPLACEME
+IntelliLastPlayWeight	25	REPLACEME
+IntelliPlayCountWeight	25	REPLACEME
+IntelliRandomWeight	15	REPLACEME
+IntelliRatingWeight	35	REPLACEME
+ISO639Language0	eng	REPLACEME
+ISO639Language1	eng	REPLACEME
+JobAllowCommFlag	1	REPLACEME
+JobAllowTranscode	1	REPLACEME
+JobQueueCheckFrequency	60	REPLACEME
+JobQueueCPU	0	REPLACEME
+JobQueueMaxSimultaneousJobs	1	REPLACEME
+JobQueueWindowEnd	23:59	REPLACEME
+JobQueueWindowStart	00:00	REPLACEME
+KeyboardAccelerators	1	REPLACEME
+Language	EN	REPLACEME
+LastMusicPlaylistPush	0	REPLACEME
+LCDBacklightOn	1	REPLACEME
+LCDBigClock	0	REPLACEME
+LCDEnable	0	REPLACEME
+LCDHeartBeatOn	0	REPLACEME
+LCDKeyString	ABCDEF	REPLACEME
+LCDPopupTime	5	REPLACEME
+LCDShowChannel	1	REPLACEME
+LCDShowGeneric	1	REPLACEME
+LCDShowMenu	1	REPLACEME
+LCDShowMusic	1	REPLACEME
+LCDShowMusicItems	ArtistTitle	REPLACEME
+LCDShowRecStatus	0	REPLACEME
+LCDShowTime	1	REPLACEME
+LCDShowVolume	1	REPLACEME
+LircKeyPressedApp		REPLACEME
+ListAsShuffled	0	REPLACEME
+LiveTVInAllPrograms	0	REPLACEME
+LogCleanDays	14	REPLACEME
+LogCleanDays	14	REPLACEME
+LogCleanEnabled	0	REPLACEME
+LogCleanEnabled	0	REPLACEME
+LogCleanMax	30	REPLACEME
+LogCleanMax	30	REPLACEME
+LogCleanPeriod	14	REPLACEME
+LogCleanPeriod	14	REPLACEME
+LogMaxCount	100	REPLACEME
+LogMaxCount	100	REPLACEME
+LogPrintLevel	8	REPLACEME
+LogPrintLevel	8	REPLACEME
+LongChannelFormat	<num> <name>	REPLACEME
+MasterMixerVolume	70	REPLACEME
+MenuTheme	MythVantage-menu	REPLACEME
+MixerControl	PCM	REPLACEME
+MixerDevice	/dev/mixer	REPLACEME
+MonitorDrives	0	REPLACEME
+MovieDataCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D	REPLACEME
+MovieListCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no	REPLACEME
+MoviePosterCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P	REPLACEME
+Mp3UseVBR	0	REPLACEME
+MTDac3Flag	0	REPLACEME
+MTDConcurrentTranscodes	1	REPLACEME
+MTDLogFlag	0	REPLACEME
+MTDNiceLevel	20	REPLACEME
+MTDPort	2442	REPLACEME
+MTDRipSize	0	REPLACEME
+MTDxvidFlag	1	REPLACEME
+MusicAudioDevice	default	REPLACEME
+MusicLocation	/data/media/audio	REPLACEME
+MusicShowRatings	0	REPLACEME
+MythArchiveAlwaysUseMythTranscode	1	REPLACEME
+MythArchiveChapterMenuAR	Video	REPLACEME
+MythArchiveCopyRemoteFiles	1	REPLACEME
+MythArchiveDateFormat	%a  %b  %d	REPLACEME
+MythArchiveDvdauthorCmd	dvdauthor	REPLACEME
+MythArchiveDVDLocation	/dev/dvd	REPLACEME
+MythArchiveEncodeToAc3	1	REPLACEME
+MythArchiveFfmpegCmd	ffmpeg	REPLACEME
+MythArchiveFileFilter	*.mpg *.mov *.avi *.mpeg *.nuv	REPLACEME
+MythArchiveGrowisofsCmd	growisofs	REPLACEME
+MythArchiveMainMenuAR	16:9	REPLACEME
+MythArchiveMkisofsCmd	mkisofs	REPLACEME
+MythArchiveMpeg2encCmd	mpeg2enc	REPLACEME
+MythArchiveMplexCmd	mplex	REPLACEME
+MythArchivePng2yuvCmd	png2yuv	REPLACEME
+MythArchiveShareDir	/usr/local/share/mythtv/mytharchive/	REPLACEME
+MythArchiveSpumuxCmd	spumux	REPLACEME
+MythArchiveTcrequantCmd	tcrequant	REPLACEME
+MythArchiveTempDir	/data/media/tmp	REPLACEME
+MythArchiveTimeFormat	%I:%M %p	REPLACEME
+MythArchiveUseFIFO	1	REPLACEME
+MythArchiveVideoFormat	NTSC	REPLACEME
+MythControlsVolume	1	REPLACEME
+mythdvd.DVDPlayerCommand	Internal	REPLACEME
+mythvideo.db_folder_view	1	REPLACEME
+mythvideo.ImageCacheSize	50	REPLACEME
+mythvideo.sort_ignores_case	1	REPLACEME
+NetworkControlEnabled	1	REPLACEME
+NetworkControlPort	6546	REPLACEME
+NonID3FileNameFormat	GENRE/ARTIST/ALBUM/TRACK_TITLE	REPLACEME
+NoPromptOnExit	0	REPLACEME
+NoWhitespace	0	REPLACEME
+OnlyImportNewMusic	0	REPLACEME
+OSDCC708CapitalsFont	FreeMono.ttf	REPLACEME
+OSDCC708CapitalsItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708CasualFont	FreeMono.ttf	REPLACEME
+OSDCC708CasualItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708CursiveFont	FreeMono.ttf	REPLACEME
+OSDCC708CursiveItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708DefaultFontType	MonoSerif	REPLACEME
+OSDCC708MonoSansSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSansSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSansSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSansSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708TextZoom	100	REPLACEME
+OSDCCFont	FreeMono.ttf	REPLACEME
+OSDFont	FreeMono.ttf	REPLACEME
+OSDGeneralTimeout	2	REPLACEME
+OSDNotifyTimeout	6	REPLACEME
+OSDProgramInfoTimeout	3	REPLACEME
+OSDTheme	Gray-OSD	REPLACEME
+OSDThemeFontSizeType	default	REPLACEME
+ParanoiaLevel	Full	REPLACEME
+PassThruOutputDevice	Default	REPLACEME
+PCMMixerVolume	70	REPLACEME
+PersistentBrowseMode	1	REPLACEME
+PIPLocation	0	REPLACEME
+PlaybackBoxStartInTitle	1	REPLACEME
+PlaybackExitPrompt	2	REPLACEME
+PlaybackPreview	1	REPLACEME
+PlaybackPreviewLowCPU	1	REPLACEME
+PlayBoxEpisodeSort	Date	REPLACEME
+PlayBoxOrdering	1	REPLACEME
+PlayBoxShading	0	REPLACEME
+PlayBoxTransparency	1	REPLACEME
+PlayMode	none	REPLACEME
+PostCDRipScript		REPLACEME
+PreferredMPEG2Decoder	ffmpeg	REPLACEME
+PreviewFromBookmark	1	REPLACEME
+PVR350EPGAlphaValue	164	REPLACEME
+PVR350InternalAudioOnly	0	REPLACEME
+PVR350OutputEnable	0	REPLACEME
+PVR350VideoDev	/dev/video16	REPLACEME
+QtFontBig	25	REPLACEME
+QtFontMedium	16	REPLACEME
+QtFontSmall	12	REPLACEME
+QueryInitialFilter	0	REPLACEME
+RandomTheme	0	REPLACEME
+RealtimePriority	1	REPLACEME
+RecordFilePrefix	/data/media/video/recordings	REPLACEME
+RememberRecGroup	1	REPLACEME
+RepeatMode	all	REPLACEME
+RunFrontendInWindow	0	REPLACEME
+SelChangeRecThreshold	16	REPLACEME
+SelectChangesChannel	1	REPLACEME
+ServiceMythWEB	0	REPLACEME
+ServiceNFS	0	REPLACEME
+ServiceSamba	0	REPLACEME
+SetupPinCodeRequired	0	REPLACEME
+ShortDateFormat	M/d	REPLACEME
+ShowGroupInfo	0	REPLACEME
+ShowWholeTree	1	REPLACEME
+SlideshowBackground		REPLACEME
+SlideshowDelay	5	REPLACEME
+SlideshowOpenGLTransition	none	REPLACEME
+SlideshowOpenGLTransitionLength	2000	REPLACEME
+SlideshowTransition	none	REPLACEME
+SmartChannelChange	0	REPLACEME
+SmartForward	0	REPLACEME
+StickyKeys	1	REPLACEME
+Style	Windows	REPLACEME
+SubTitleCommand	-sid %s	REPLACEME
+TagSeparator	 - 	REPLACEME
+Theme	basic-blue	REPLACEME
+ThemeFontSizeType	default	REPLACEME
+ThemePainter	qt	REPLACEME
+TimeFormat	h:mm AP	REPLACEME
+timePerPage	4	REPLACEME
+TitlePlayCommand	mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c	REPLACEME
+TranscodeCommand	transcode	REPLACEME
+TreeLevels	splitartist artist album title	REPLACEME
+TVVidModeForceAspect	0.0	REPLACEME
+TVVidModeForceAspect0	0.0	REPLACEME
+TVVidModeForceAspect1	0.0	REPLACEME
+TVVidModeForceAspect2	0.0	REPLACEME
+TVVidModeRefreshRate	0	REPLACEME
+TVVidModeRefreshRate0	0	REPLACEME
+TVVidModeRefreshRate1	0	REPLACEME
+TVVidModeRefreshRate2	0	REPLACEME
+TVVidModeResolution	640x480	REPLACEME
+TVVidModeResolution0	640x480	REPLACEME
+TVVidModeResolution1	640x480	REPLACEME
+TVVidModeResolution2	640x480	REPLACEME
+UDPNotifyPort	6948	REPLACEME
+UnknownCategory	Unknown	REPLACEME
+UnknownTitle	Unknown	REPLACEME
+upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1	dee5b0fe-7087-4960-8794-428d3e01a61f	REPLACEME
+UseArrowAccels	1	REPLACEME
+UseOutputPictureControls	1	REPLACEME
+UseVideoModes	0	REPLACEME
+UseVideoTimebase	0	REPLACEME
+UseVirtualKeyboard	1	REPLACEME
+VCDDeviceLocation	/dev/cdrom	REPLACEME
+VCDPlayerCommand	mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv	REPLACEME
+VertScanPercentage	0	REPLACEME
+VideoAggressivePC	0	REPLACEME
+VideoArtworkDir	/data/media/images/posters	REPLACEME
+VideoBrowserNoDB	0	REPLACEME
+VideoDefaultParentalLevel	4	REPLACEME
+VideoGalleryAspectRatio	1	REPLACEME
+VideoGalleryColsPerPage	4	REPLACEME
+VideoGalleryNoDB	0	REPLACEME
+VideoGalleryRowsPerPage	3	REPLACEME
+VideoGallerySubtitle	1	REPLACEME
+VideoListUnknownFiletypes	1	REPLACEME
+VideoNewBrowsable	1	REPLACEME
+VideoDefaultPlayer	Internal	REPLACEME
+VideoStartupDir	/data/media/video/movies	REPLACEME
+VideoTreeLoadMetaData	1	REPLACEME
+VideoTreeNoDB	0	REPLACEME
+VidModeHeight0	0	REPLACEME
+VidModeHeight1	0	REPLACEME
+VidModeHeight2	0	REPLACEME
+VidModeWidth0	0	REPLACEME
+VidModeWidth1	0	REPLACEME
+VidModeWidth2	0	REPLACEME
+VisualCycleOnSongChange	0	REPLACEME
+VisualMode	Random	REPLACEME
+VisualModeDelay	0	REPLACEME
+VisualScaleHeight	1	REPLACEME
+VisualScaleWidth	1	REPLACEME
+WatchTVGuide	0	REPLACEME
+WebBrowserCommand	/usr/local/bin/mythbrowser	REPLACEME
+WebBrowserHideScrollbars	0	REPLACEME
+WebBrowserScrollMode	1	REPLACEME
+WebBrowserScrollSpeed	4	REPLACEME
+WebBrowserZoomLevel	20	REPLACEME
+XScanDisplacement	0	REPLACEME
+YScanDisplacement	0	REPLACEME
+HaltCommand	sudo /sbin/poweroff	REPLACEME
+RebootCommand	sudo /sbin/reboot	REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt
new file mode 100644
index 0000000..f82f2d2
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt
@@ -0,0 +1,209 @@
+context	action	description	keylist	hostname
+Music	FFWD	Fast forward	PgDown	REPLACEME
+Music	STOP	Stop playback	O	REPLACEME
+Music	MUTE	Mute	|,\\\\,F9	REPLACEME
+Gallery	SCROLLUP	Scroll image up	2	REPLACEME
+Music	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
+Music	VOLUMEUP	Volume up	],},F11	REPLACEME
+qt	DELETE	Delete	D	REPLACEME
+Music	RWND	Rewind	PgUp	REPLACEME
+qt	EDIT	Edit	E	REPLACEME
+Music	PAUSE	Pause/Start playback	P	REPLACEME
+Gallery	RECENTER	Recenter image	5	REPLACEME
+Gallery	FULLSIZE	Full-size (un-zoom) image	0	REPLACEME
+Gallery	LOWRIGHT	Go to the lower-right corner of the image	PgDown	REPLACEME
+Gallery	SCROLLRIGHT	Scroll image right	6	REPLACEME
+Gallery	MENU	Toggle activating menu in thumbnail view	M	REPLACEME
+Gallery	SCROLLDOWN	Scroll image down	8	REPLACEME
+Gallery	ZOOMIN	Zoom image in	9	REPLACEME
+Gallery	UPLEFT	Go to the upper-left corner of the image	PgUp	REPLACEME
+Gallery	RANDOMSHOW	Start Random Slideshow in thumbnail view	R	REPLACEME
+Gallery	ROTLEFT	Rotate image left 90 degrees	[,1	REPLACEME
+Gallery	SLIDESHOW	Start Slideshow in thumbnail view	S	REPLACEME
+Gallery	ROTRIGHT	Rotate image right 90 degrees	],3	REPLACEME
+Gallery	END	Go to the last image in thumbnail view	End	REPLACEME
+Gallery	HOME	Go to the first image in thumbnail view	Home	REPLACEME
+Gallery	SCROLLLEFT	Scroll image left	4	REPLACEME
+Gallery	PLAY	Start/Stop Slideshow	P	REPLACEME
+NetFlix	REMOVE	Removes movie from queue	D	REPLACEME
+Archive	TOGGLECUT	Toggle use cut list state for selected program	C	REPLACEME
+Gallery	ZOOMOUT	Zoom image out	7	REPLACEME
+NetFlix	MOVETOTOP	Moves movie to top of queue	1	REPLACEME
+Global	DOWN	Down Arrow	Down	REPLACEME
+ITV Menu	MENUTEXT	Menu Text	F7	REPLACEME
+ITV Menu	TEXTEXIT	Menu Exit	F6	REPLACEME
+Global	LEFT	Left Arrow	Left	REPLACEME
+Global	RIGHT	Right Arrow	Right	REPLACEME
+Global	UP	Up Arrow	Up	REPLACEME
+Global	MENU	Pop-up menu	M	REPLACEME
+Global	PREVVIEW	Previous View	Home	REPLACEME
+Global	ESCAPE	Escape	Esc	REPLACEME
+Global	PAGEUP	Page Up	PgUp	REPLACEME
+Global	SELECT	Select	Return,Enter,Space	REPLACEME
+Global	HELP	Help	F1	REPLACEME
+Global	INFO	More information	I	REPLACEME
+Global	NEXTVIEW	Next View	End	REPLACEME
+ITV Menu	MENUBLUE	Menu Blue	F5	REPLACEME
+Global	PAGEDOWN	Page Down	PgDown	REPLACEME
+Global	EJECT	Eject Removable Media		REPLACEME
+Global	3	3	3	REPLACEME
+Global	1	1	1	REPLACEME
+Global	6	6	6	REPLACEME
+Global	0	0	0	REPLACEME
+Global	2	2	2	REPLACEME
+Global	4	4	4	REPLACEME
+TV Frontend	DELETE	Delete Program	D	REPLACEME
+Global	8	8	8	REPLACEME
+Global	7	7	7	REPLACEME
+TV Frontend	PAGEDOWN	Page Down	9	REPLACEME
+TV Frontend	PAGEUP	Page Up	3	REPLACEME
+Global	5	5	5	REPLACEME
+TV Frontend	CHANGERECGROUP	Change Recording Group		REPLACEME
+Global	9	9	9	REPLACEME
+Video	END	Go to the last video	End	REPLACEME
+Video	INCPARENT	Increase Parental Level	],},F11	REPLACEME
+Weather	PAUSE	Pause current page	P	REPLACEME
+TV Frontend	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
+Video	BROWSE	Change browsable in video manager	B	REPLACEME
+Welcome	SHOWSETTINGS	Show Mythshutdown settings	F11	REPLACEME
+Video	HOME	Go to the first video	Home	REPLACEME
+Video	FILTER	Open video filter dialog	F	REPLACEME
+Welcome	STARTXTERM	Open an Xterm window	F12	REPLACEME
+Music	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
+Music	BLANKSCR	Blank screen	5	REPLACEME
+Video	DELETE	Delete video	D	REPLACEME
+Music	THMBUP	Increase rating	9	REPLACEME
+Music	CYCLEVIS	Cycle visualizer mode	6	REPLACEME
+Teletext Menu	REVEAL	Reveal hidden Text	F8	REPLACEME
+Music	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
+TV Frontend	PLAYBACK	Play Program	P	REPLACEME
+News	FORCERETRIEVE	Force update news items	M	REPLACEME
+Video	DECPARENT	Decrease Parental Level	[,{,F10	REPLACEME
+News	RETRIEVENEWS	Update news items	I	REPLACEME
+News	CANCEL	Cancel news item updating	C	REPLACEME
+Teletext Menu	TOGGLEBACKGROUND	Toggle Background	F7	REPLACEME
+Teletext Menu	MENUWHITE	Menu White	F6	REPLACEME
+ITV Menu	MENURED	Menu Red	F2	REPLACEME
+ITV Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
+ITV Menu	MENUGREEN	Menu Green	F3	REPLACEME
+Teletext Menu	PREVSUBPAGE	Previous Subpage	Left	REPLACEME
+Teletext Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
+Teletext Menu	MENUGREEN	Menu Green	F3	REPLACEME
+Teletext Menu	NEXTSUBPAGE	Next Subpage	Right	REPLACEME
+Teletext Menu	MENUBLUE	Menu Blue	F5	REPLACEME
+Teletext Menu	TOGGLETT	Toggle Teletext	T	REPLACEME
+Teletext Menu	NEXTPAGE	Next Page	Down	REPLACEME
+TV Editing	LOADCOMMSKIP	Load cut list from commercial skips	Z,End	REPLACEME
+TV Editing	BIGJUMPREW	Jump back 10x the normal amount	,,<	REPLACEME
+TV Editing	BIGJUMPFWD	Jump forward 10x the normal amount	>,.	REPLACEME
+TV Playback	JUMPTODVDROOTMENU	Jump to the DVD Root Menu		REPLACEME
+Teletext Menu	MENURED	Menu Red	F2	REPLACEME
+TV Playback	SIGNALMON	Monitor Signal Quality	F7	REPLACEME
+Teletext Menu	PREVPAGE	Previous Page	Up	REPLACEME
+TV Editing	INVERTMAP	Invert Begin/End cut points	I	REPLACEME
+TV Playback	PLAY	Play	Ctrl+P	REPLACEME
+TV Editing	PREVCUT	Jump to the previous cut point	PgUp	REPLACEME
+TV Editing	NEXTCUT	Jump to the next cut point	PgDown	REPLACEME
+TV Playback	CYCLECOMMSKIPMODE	Cycle Commercial Skip mode		REPLACEME
+TV Playback	TOGGLESLEEP	Toggle the Sleep Timer	F8	REPLACEME
+TV Playback	JUMPREC	Display menu of recorded programs to jump to		REPLACEME
+TV Playback	FINDER	Show the Program Finder	#	REPLACEME
+TV Playback	ADJUSTSTRETCH	Turn on time stretch control	A	REPLACEME
+TV Editing	CLEARMAP	Clear editing cut points	C,Q,Home	REPLACEME
+TV Editing	TOGGLEEDIT	Exit out of Edit Mode	E	REPLACEME
+TV Playback	TOGGLESTRETCH	Toggle time stretch speed		REPLACEME
+TV Playback	TOGGLERECCONTROLS	Recording picture adjustments for this recorder	G	REPLACEME
+TV Playback	TOGGLEAUDIOSYNC	Turn on audio sync adjustment controls		REPLACEME
+TV Playback	TOGGLEEDIT	Start Edit Mode	E	REPLACEME
+TV Playback	SPEEDINC	Increase the playback speed	U	REPLACEME
+TV Playback	STRETCHDEC	Decrease time stretch speed		REPLACEME
+TV Playback	SPEEDDEC	Decrease the playback speed	J	REPLACEME
+TV Playback	TOGGLECHANCONTROLS	Recording picture adjustments for this channel	Ctrl+G	REPLACEME
+TV Playback	GUIDE	Show the Program Guide	S	REPLACEME
+TV Playback	JUMPPREV	Jump to previously played recording		REPLACEME
+TV Playback	QUEUETRANSCODE	Queue the current recording for transcoding	X	REPLACEME
+TV Playback	STRETCHINC	Increase time stretch speed		REPLACEME
+TV Playback	TOGGLEPICCONTROLS	Playback picture adjustments	F	REPLACEME
+TV Playback	PREVCC708	Previous ATSC CC track		REPLACEME
+TV Playback	NEXTCC708	Next ATSC CC track		REPLACEME
+TV Playback	NEXTCC	Next of any captions		REPLACEME
+TV Playback	NEXTSCAN	Next video scan overidemode		REPLACEME
+TV Playback	NEXTCC608	Next VBI CC track		REPLACEME
+TV Playback	PREVCC608	Previous VBI CC track		REPLACEME
+TV Playback	PREVAUDIO	Previous audio track	-	REPLACEME
+TV Playback	PREVSUBTITLE	Previous subtitle track		REPLACEME
+TV Playback	NEXTSUBTITLE	Next subtitle track		REPLACEME
+TV Playback	NEXTAUDIO	Next audio track	+	REPLACEME
+TV Playback	SELECTCC708_3	Display ATSC CC4		REPLACEME
+TV Playback	SELECTCC708_0	Display ATSC CC1		REPLACEME
+TV Playback	SELECTCC608_1	Display VBI CC2		REPLACEME
+TV Playback	SELECTAUDIO_0	Play audio track 1		REPLACEME
+TV Playback	SELECTCC608_2	Display VBI CC3		REPLACEME
+TV Playback	TOGGLETTM	Toggle Teletext Menu		REPLACEME
+TV Playback	SELECTSUBTITLE_1	Display subtitle 2		REPLACEME
+TV Playback	SELECTCC608_3	Display VBI CC4		REPLACEME
+TV Playback	SELECTCC708_1	Display ATSC CC2		REPLACEME
+TV Playback	SELECTCC708_2	Display ATSC CC3		REPLACEME
+TV Playback	SELECTAUDIO_1	Play audio track 2		REPLACEME
+TV Playback	SELECTSUBTITLE_0	Display subtitle 1		REPLACEME
+TV Playback	TOGGLETTC	Toggle Teletext Captions		REPLACEME
+TV Playback	SELECTCC608_0	Display VBI CC1		REPLACEME
+TV Playback	SWAPPIP	Swap PiP/Main	N	REPLACEME
+TV Playback	TOGGLEASPECT	Toggle the display aspect ratio	W	REPLACEME
+TV Playback	TOGGLECC708	Toggle ATSC CC		REPLACEME
+TV Playback	TOGGLECC608	Toggle VBI CC		REPLACEME
+TV Playback	TOGGLEPIPMODE	Toggle Picture-in-Picture mode	V	REPLACEME
+TV Playback	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
+TV Playback	TOGGLEPIPWINDOW	Toggle active PiP window	B	REPLACEME
+TV Playback	MUTE	Mute	|,\\\\,F9	REPLACEME
+TV Playback	TOGGLEBROWSE	Toggle channel browse mode	O	REPLACEME
+TV Playback	TOGGLESUBTITLE	Toggle Subtitles		REPLACEME
+TV Playback	VOLUMEUP	Volume up	],},F11	REPLACEME
+TV Playback	TOGGLECC	Toggle any captions	T	REPLACEME
+TV Playback	JUMPSTART	Jump to the start of the recording.	Ctrl+B	REPLACEME
+TV Playback	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
+TV Playback	SKIPCOMMERCIAL	Skip Commercial	Z,End	REPLACEME
+TV Playback	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
+TV Playback	SWITCHCARDS	Switch Capture Cards	Y	REPLACEME
+TV Playback	SKIPCOMMBACK	Skip Commercial (Reverse)	Q,Home	REPLACEME
+TV Playback	TOGGLEINPUTS	Toggle Inputs	C	REPLACEME
+TV Playback	FFWDSTICKY	Fast Forward (Sticky) or Forward one frame while paused	>,.	REPLACEME
+TV Playback	JUMPFFWD	Jump ahead	PgDown	REPLACEME
+TV Playback	PREVCHAN	Switch to the previous channel	H	REPLACEME
+TV Playback	JUMPBKMRK	Jump to bookmark	K	REPLACEME
+TV Playback	RWNDSTICKY	Rewind (Sticky) or Rewind one frame while paused	,,<	REPLACEME
+TV Playback	NEXTFAV	Switch to the next favorite channel	/	REPLACEME
+TV Playback	JUMPRWND	Jump back	PgUp	REPLACEME
+TV Playback	SEEKRWND	Rewind	Left	REPLACEME
+TV Playback	SEEKFFWD	Fast Forward	Right	REPLACEME
+TV Playback	CHANNELDOWN	Channel down	Down	REPLACEME
+TV Playback	CHANNELUP	Channel up	Up	REPLACEME
+TV Playback	ARBSEEK	Arbitrary Seek	*	REPLACEME
+TV Playback	DELETE	Delete Program	D	REPLACEME
+TV Playback	CLEAROSD	Clear OSD	Backspace	REPLACEME
+TV Frontend	DETAILS	Show program details	U	REPLACEME
+TV Frontend	CUSTOMEDIT	Edit Custom Record Rule	E	REPLACEME
+TV Frontend	UPCOMING	List upcoming episodes	O	REPLACEME
+TV Frontend	CHANUPDATE	Switch channels without exiting guide in Live TV mode.	X	REPLACEME
+TV Frontend	RANKDEC	Decrease program or channel rank	Left	REPLACEME
+TV Frontend	VIEWCARD	Switch Capture Card view	Y	REPLACEME
+TV Playback	PAUSE	Pause	P	REPLACEME
+TV Frontend	RANKINC	Increase program or channel rank	Right	REPLACEME
+TV Frontend	PAGERIGHT	Page the program guide right	>,.	REPLACEME
+TV Frontend	PAGELEFT	Page the program guide left	,,<	REPLACEME
+TV Frontend	NEXTFAV	Toggle showing all channels or just favorites in the program guide.	/	REPLACEME
+Gallery	DELETE	Delete marked images or current image if none are marked	D	REPLACEME
+TV Frontend	DAYRIGHT	Page the program guide forward one day	End,1	REPLACEME
+Gallery	MARK	Mark image	T	REPLACEME
+Game	TOGGLEFAV	Toggle the current game as a favorite	?,/	REPLACEME
+TV Frontend	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
+TV Frontend	DAYLEFT	Page the program guide back one day	Home,7	REPLACEME
+Music	PREVTRACK	Move to the previous track	,,<,Q,Home	REPLACEME
+Game	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
+Music	DELETE	Delete track from playlist	D	REPLACEME
+Gallery	INFO	Toggle Showing Information about Image	I	REPLACEME
+Game	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
+Music	REFRESH	Refresh music tree	8	REPLACEME
+Music	NEXTTRACK	Move to the next track	>,.,Z,End	REPLACEME
+Music	FILTER	Filter All My Music	F	REPLACEME
+Music	THMBDOWN	Decrease rating	7	REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_2/settings.txt b/abs/core-testing/live-installer/templates/settings/default_2/settings.txt
new file mode 100644
index 0000000..106be04
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/settings/default_2/settings.txt
@@ -0,0 +1,320 @@
+value	data	hostname
+AC3PassThru	0	REPLACEME
+AggressiveSoundcardBuffer	0	REPLACEME
+AllowQuitShutdown	3	REPLACEME
+AltClearSavedPosition	1	REPLACEME
+AspectOverride	0	REPLACEME
+AudioNag	1	REPLACEME
+AudioOutputDevice	/dev/dsp	REPLACEME
+AutoCommercialSkip	2	REPLACEME
+AutoLookupCD	1	REPLACEME
+AutomaticSetWatched	0	REPLACEME
+AutoPlayCD	0	REPLACEME
+BackendServerPort	6543	REPLACEME
+BackendStatusPort	6544	REPLACEME
+CCBackground	0	REPLACEME
+CDBlankType	fast	REPLACEME
+CDCreateDir	1	REPLACEME
+CDDevice	/dev/cdrom	REPLACEME
+CDDiskSize	1	REPLACEME
+CDWriterEnabled	0	REPLACEME
+CDWriteSpeed	0	REPLACEME
+ChannelFormat	<num> <sign>	REPLACEME
+ChannelOrdering	channum	REPLACEME
+chanPerPage	5	REPLACEME
+ClearSavedPosition	1	REPLACEME
+CommNotifyAmount	0	REPLACEME
+CommRewindAmount	0	REPLACEME
+CustomFilters		REPLACEME
+DateFormat	ddd MMM d	REPLACEME
+DecodeExtraAudio	1	REPLACEME
+Default MythVideo View	1	REPLACEME
+DefaultCCMode	0	REPLACEME
+DefaultRipQuality	0	REPLACEME
+DefaultTVChannel	3	REPLACEME
+Deinterlace	1	REPLACEME
+DeinterlaceFilter	kerneldeint	REPLACEME
+DisplayGroupDefaultView	0	REPLACEME
+DisplayGroupTitleSort	0	REPLACEME
+DisplayRecGroup	Default	REPLACEME
+DispRecGroupAsAllProg	0	REPLACEME
+DTSPassThru	0	REPLACEME
+DVDDeviceLocation	/dev/dvd	REPLACEME
+DVDOnInsertDVD	1	REPLACEME
+DVDRipLocation	/data/media/tmp	REPLACEME
+EjectCDAfterRipping	1	REPLACEME
+EnableMHEG	0	REPLACEME
+EnableXbox	0	REPLACEME
+EnableXbox	0	REPLACEME
+EncoderType	ogg	REPLACEME
+EndOfRecordingExitPrompt	1	REPLACEME
+EPGFillType	10	REPLACEME
+EPGScrollType	1	REPLACEME
+EPGShowCategoryColors	1	REPLACEME
+EPGShowCategoryText	1	REPLACEME
+EPGShowChannelIcon	1	REPLACEME
+EPGShowFavorites	0	REPLACEME
+ExactSeeking	0	REPLACEME
+FFRewReposTime	100	REPLACEME
+FFRewReverse	1	REPLACEME
+FilenameTemplate	ARTIST/ALBUM/TRACK-TITLE	REPLACEME
+GalleryDir	/data/media/images	REPLACEME
+GalleryImportDirs	/mnt/cdrom:/mnt/camera	REPLACEME
+GalleryMoviePlayerCmd	mplayer -fs %s	REPLACEME
+GalleryOverlayCaption	0	REPLACEME
+GalleryRecursiveSlideshow	1	REPLACEME
+GallerySortOrder	20	REPLACEME
+GalleryThumbnailLocation	1	REPLACEME
+GameAllTreeLevels	system gamename	REPLACEME
+GameFavTreeLevels	gamename	REPLACEME
+GeneratePreviewPixmaps	0	REPLACEME
+GuiHeight	0	REPLACEME
+GuiOffsetX	0	REPLACEME
+GuiOffsetY	0	REPLACEME
+GuiSizeForTV	0	REPLACEME
+GuiVidModeResolution	640x480	REPLACEME
+GuiWidth	0	REPLACEME
+HaltCommand	halt	REPLACEME
+HideMouseCursor	1	REPLACEME
+HorizScanPercentage	0	REPLACEME
+Ignore_ID3	0	REPLACEME
+IndividualMuteControl	0	REPLACEME
+IntelliLastPlayWeight	25	REPLACEME
+IntelliPlayCountWeight	25	REPLACEME
+IntelliRandomWeight	15	REPLACEME
+IntelliRatingWeight	35	REPLACEME
+ISO639Language0	eng	REPLACEME
+ISO639Language1	eng	REPLACEME
+JobAllowCommFlag	1	REPLACEME
+JobAllowTranscode	1	REPLACEME
+JobQueueCheckFrequency	60	REPLACEME
+JobQueueCPU	0	REPLACEME
+JobQueueMaxSimultaneousJobs	1	REPLACEME
+JobQueueWindowEnd	23:59	REPLACEME
+JobQueueWindowStart	00:00	REPLACEME
+KeyboardAccelerators	1	REPLACEME
+Language	EN	REPLACEME
+LastMusicPlaylistPush	0	REPLACEME
+LCDBacklightOn	1	REPLACEME
+LCDBigClock	0	REPLACEME
+LCDEnable	0	REPLACEME
+LCDHeartBeatOn	0	REPLACEME
+LCDKeyString	ABCDEF	REPLACEME
+LCDPopupTime	5	REPLACEME
+LCDShowChannel	1	REPLACEME
+LCDShowGeneric	1	REPLACEME
+LCDShowMenu	1	REPLACEME
+LCDShowMusic	1	REPLACEME
+LCDShowMusicItems	ArtistTitle	REPLACEME
+LCDShowRecStatus	0	REPLACEME
+LCDShowTime	1	REPLACEME
+LCDShowVolume	1	REPLACEME
+LircKeyPressedApp		REPLACEME
+ListAsShuffled	0	REPLACEME
+LiveTVInAllPrograms	0	REPLACEME
+LogCleanDays	14	REPLACEME
+LogCleanDays	14	REPLACEME
+LogCleanEnabled	0	REPLACEME
+LogCleanEnabled	0	REPLACEME
+LogCleanMax	30	REPLACEME
+LogCleanMax	30	REPLACEME
+LogCleanPeriod	14	REPLACEME
+LogCleanPeriod	14	REPLACEME
+LogMaxCount	100	REPLACEME
+LogMaxCount	100	REPLACEME
+LogPrintLevel	8	REPLACEME
+LogPrintLevel	8	REPLACEME
+LongChannelFormat	<num> <name>	REPLACEME
+MasterMixerVolume	70	REPLACEME
+MenuTheme	STB-menu	REPLACEME
+MixerControl	PCM	REPLACEME
+MixerDevice	/dev/mixer	REPLACEME
+MonitorDrives	0	REPLACEME
+MovieDataCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D	REPLACEME
+MovieListCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no	REPLACEME
+MoviePosterCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P	REPLACEME
+Mp3UseVBR	0	REPLACEME
+MTDac3Flag	0	REPLACEME
+MTDConcurrentTranscodes	1	REPLACEME
+MTDLogFlag	0	REPLACEME
+MTDNiceLevel	20	REPLACEME
+MTDPort	2442	REPLACEME
+MTDRipSize	0	REPLACEME
+MTDxvidFlag	1	REPLACEME
+MusicAudioDevice	default	REPLACEME
+MusicLocation	/data/media/audio	REPLACEME
+MusicShowRatings	0	REPLACEME
+MythArchiveAlwaysUseMythTranscode	1	REPLACEME
+MythArchiveChapterMenuAR	Video	REPLACEME
+MythArchiveCopyRemoteFiles	1	REPLACEME
+MythArchiveDateFormat	%a  %b  %d	REPLACEME
+MythArchiveDvdauthorCmd	dvdauthor	REPLACEME
+MythArchiveDVDLocation	/dev/dvd	REPLACEME
+MythArchiveEncodeToAc3	1	REPLACEME
+MythArchiveFfmpegCmd	ffmpeg	REPLACEME
+MythArchiveFileFilter	*.mpg *.mov *.avi *.mpeg *.nuv	REPLACEME
+MythArchiveGrowisofsCmd	growisofs	REPLACEME
+MythArchiveMainMenuAR	16:9	REPLACEME
+MythArchiveMkisofsCmd	mkisofs	REPLACEME
+MythArchiveMpeg2encCmd	mpeg2enc	REPLACEME
+MythArchiveMplexCmd	mplex	REPLACEME
+MythArchivePng2yuvCmd	png2yuv	REPLACEME
+MythArchiveShareDir	/usr/local/share/mythtv/mytharchive/	REPLACEME
+MythArchiveSpumuxCmd	spumux	REPLACEME
+MythArchiveTcrequantCmd	tcrequant	REPLACEME
+MythArchiveTempDir	/data/media/tmp	REPLACEME
+MythArchiveTimeFormat	%I:%M %p	REPLACEME
+MythArchiveUseFIFO	1	REPLACEME
+MythArchiveVideoFormat	NTSC	REPLACEME
+MythControlsVolume	1	REPLACEME
+mythdvd.DVDPlayerCommand	Internal	REPLACEME
+mythvideo.db_folder_view	1	REPLACEME
+mythvideo.ImageCacheSize	50	REPLACEME
+mythvideo.sort_ignores_case	1	REPLACEME
+NetworkControlEnabled	1	REPLACEME
+NetworkControlPort	6546	REPLACEME
+NonID3FileNameFormat	GENRE/ARTIST/ALBUM/TRACK_TITLE	REPLACEME
+NoPromptOnExit	0	REPLACEME
+NoWhitespace	0	REPLACEME
+OnlyImportNewMusic	0	REPLACEME
+OSDCC708CapitalsFont	FreeMono.ttf	REPLACEME
+OSDCC708CapitalsItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708CasualFont	FreeMono.ttf	REPLACEME
+OSDCC708CasualItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708CursiveFont	FreeMono.ttf	REPLACEME
+OSDCC708CursiveItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708DefaultFontType	MonoSerif	REPLACEME
+OSDCC708MonoSansSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSansSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708MonoSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSansSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSansSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSerifFont	FreeMono.ttf	REPLACEME
+OSDCC708PropSerifItalicFont	FreeMono.ttf	REPLACEME
+OSDCC708TextZoom	100	REPLACEME
+OSDCCFont	FreeMono.ttf	REPLACEME
+OSDFont	FreeMono.ttf	REPLACEME
+OSDGeneralTimeout	2	REPLACEME
+OSDNotifyTimeout	6	REPLACEME
+OSDProgramInfoTimeout	3	REPLACEME
+OSDTheme	Gray-OSD	REPLACEME
+OSDThemeFontSizeType	default	REPLACEME
+ParanoiaLevel	Full	REPLACEME
+PassThruOutputDevice	Default	REPLACEME
+PCMMixerVolume	70	REPLACEME
+PersistentBrowseMode	1	REPLACEME
+PIPLocation	0	REPLACEME
+PlaybackBoxStartInTitle	1	REPLACEME
+PlaybackExitPrompt	2	REPLACEME
+PlaybackPreview	1	REPLACEME
+PlaybackPreviewLowCPU	1	REPLACEME
+PlayBoxEpisodeSort	Date	REPLACEME
+PlayBoxOrdering	1	REPLACEME
+PlayBoxShading	0	REPLACEME
+PlayBoxTransparency	1	REPLACEME
+PlayMode	none	REPLACEME
+PostCDRipScript		REPLACEME
+PreferredMPEG2Decoder	ffmpeg	REPLACEME
+PreviewFromBookmark	1	REPLACEME
+PVR350EPGAlphaValue	164	REPLACEME
+PVR350InternalAudioOnly	0	REPLACEME
+PVR350OutputEnable	0	REPLACEME
+PVR350VideoDev	/dev/video16	REPLACEME
+QtFontBig	25	REPLACEME
+QtFontMedium	16	REPLACEME
+QtFontSmall	12	REPLACEME
+QueryInitialFilter	0	REPLACEME
+RandomTheme	0	REPLACEME
+RealtimePriority	1	REPLACEME
+RecordFilePrefix	/data/media/video/recordings	REPLACEME
+RememberRecGroup	1	REPLACEME
+RepeatMode	all	REPLACEME
+RunFrontendInWindow	0	REPLACEME
+SelChangeRecThreshold	16	REPLACEME
+SelectChangesChannel	1	REPLACEME
+ServiceMythWEB	0	REPLACEME
+ServiceNFS	0	REPLACEME
+ServiceSamba	0	REPLACEME
+SetupPinCodeRequired	0	REPLACEME
+ShortDateFormat	M/d	REPLACEME
+ShowGroupInfo	0	REPLACEME
+ShowWholeTree	1	REPLACEME
+SlideshowBackground		REPLACEME
+SlideshowDelay	5	REPLACEME
+SlideshowOpenGLTransition	none	REPLACEME
+SlideshowOpenGLTransitionLength	2000	REPLACEME
+SlideshowTransition	none	REPLACEME
+SmartChannelChange	0	REPLACEME
+SmartForward	0	REPLACEME
+StickyKeys	1	REPLACEME
+Style		REPLACEME
+SubTitleCommand	-sid %s	REPLACEME
+TagSeparator	 - 	REPLACEME
+Theme	basic-blue	REPLACEME
+ThemeFontSizeType	default	REPLACEME
+ThemePainter	qt	REPLACEME
+TimeFormat	h:mm AP	REPLACEME
+timePerPage	4	REPLACEME
+TitlePlayCommand	mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c	REPLACEME
+TranscodeCommand	transcode	REPLACEME
+TreeLevels	splitartist artist album title	REPLACEME
+TVVidModeForceAspect	0.0	REPLACEME
+TVVidModeForceAspect0	0.0	REPLACEME
+TVVidModeForceAspect1	0.0	REPLACEME
+TVVidModeForceAspect2	0.0	REPLACEME
+TVVidModeRefreshRate	0	REPLACEME
+TVVidModeRefreshRate0	0	REPLACEME
+TVVidModeRefreshRate1	0	REPLACEME
+TVVidModeRefreshRate2	0	REPLACEME
+TVVidModeResolution	640x480	REPLACEME
+TVVidModeResolution0	640x480	REPLACEME
+TVVidModeResolution1	640x480	REPLACEME
+TVVidModeResolution2	640x480	REPLACEME
+UDPNotifyPort	6948	REPLACEME
+UnknownCategory	Unknown	REPLACEME
+UnknownTitle	Unknown	REPLACEME
+upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1	dee5b0fe-7087-4960-8794-428d3e01a61f	REPLACEME
+UseArrowAccels	1	REPLACEME
+UseDHCP	1	REPLACEME
+UseOutputPictureControls	1	REPLACEME
+UseVideoModes	0	REPLACEME
+UseVideoTimebase	0	REPLACEME
+UseVirtualKeyboard	1	REPLACEME
+VCDDeviceLocation	/dev/cdrom	REPLACEME
+VCDPlayerCommand	mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv	REPLACEME
+VertScanPercentage	0	REPLACEME
+VideoAggressivePC	0	REPLACEME
+VideoArtworkDir	/data/media/images/posters	REPLACEME
+VideoBrowserNoDB	0	REPLACEME
+VideoDefaultParentalLevel	4	REPLACEME
+VideoGalleryAspectRatio	1	REPLACEME
+VideoGalleryColsPerPage	4	REPLACEME
+VideoGalleryNoDB	0	REPLACEME
+VideoGalleryRowsPerPage	3	REPLACEME
+VideoGallerySubtitle	1	REPLACEME
+VideoDefaultPlayer	/usr/bin/playmedia.sh VIDEO %s	REPLACEME
+VideoListUnknownFiletypes	1	REPLACEME
+VideoNewBrowsable	1	REPLACEME
+VideoStartupDir	/data/media/video/movies	REPLACEME
+VideoTreeLoadMetaData	1	REPLACEME
+VideoTreeNoDB	0	REPLACEME
+VidModeHeight0	0	REPLACEME
+VidModeHeight1	0	REPLACEME
+VidModeHeight2	0	REPLACEME
+VidModeWidth0	0	REPLACEME
+VidModeWidth1	0	REPLACEME
+VidModeWidth2	0	REPLACEME
+VisualCycleOnSongChange	0	REPLACEME
+VisualMode	Random	REPLACEME
+VisualModeDelay	0	REPLACEME
+VisualScaleHeight	1	REPLACEME
+VisualScaleWidth	1	REPLACEME
+WatchTVGuide	0	REPLACEME
+WebBrowserCommand	/usr/local/bin/mythbrowser	REPLACEME
+WebBrowserHideScrollbars	0	REPLACEME
+WebBrowserScrollMode	1	REPLACEME
+WebBrowserScrollSpeed	4	REPLACEME
+WebBrowserZoomLevel	20	REPLACEME
+XScanDisplacement	0	REPLACEME
+YScanDisplacement	0	REPLACEME
diff --git a/abs/core-testing/live-installer/templates/sources/mv-core b/abs/core-testing/live-installer/templates/sources/mv-core
new file mode 100644
index 0000000..f9f6c97
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/sources/mv-core
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-core
diff --git a/abs/core-testing/live-installer/templates/sources/mv-core-testing b/abs/core-testing/live-installer/templates/sources/mv-core-testing
new file mode 100644
index 0000000..1fce6ea
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/sources/mv-core-testing
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-core-testing
diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra b/abs/core-testing/live-installer/templates/sources/mv-extra
new file mode 100644
index 0000000..e13640f
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/sources/mv-extra
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-extra
diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra-testing b/abs/core-testing/live-installer/templates/sources/mv-extra-testing
new file mode 100644
index 0000000..c176add
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/sources/mv-extra-testing
@@ -0,0 +1,2 @@
+##Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-extra-testing
diff --git a/abs/core-testing/live-installer/templates/sources/svc_pkg b/abs/core-testing/live-installer/templates/sources/svc_pkg
new file mode 100644
index 0000000..c1efdcc
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/sources/svc_pkg
@@ -0,0 +1,3 @@
+[svc_pkg]
+Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686
+
diff --git a/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
new file mode 100755
index 0000000..51db997
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
@@ -0,0 +1,413 @@
+#
+
+begin remote 
+ 
+   name   Time_Warner_SA3250 
+   flags CONST_LENGTH|RAW_CODES 
+   eps            30 
+   aeps          100 
+ 
+   ptrail          0 
+   repeat     0     0 
+   gap    100240 
+   frequency   57600 
+ 
+       begin raw_codes 
+ 
+           name MUTE 
+               972     802     971     802    1887     778 
+               971     798     971     798     972     798 
+               971     798     972     798     971    1677 
+               972     802    1887    1656     992 
+ 
+           name POWER 
+              3450    3229     894    2468     891    2468 
+               893     778     892    2468     891    2469 
+               917    2444     891    2468     892    2469 
+               891     779     892     778     918     752 
+               917     754     917     752     892    2471 
+               889     779     892     779     892     777 
+               892     779     892     777     868    2492 
+               892    2469     891    2470     890 
+ 
+           name GUIDE 
+              3397    3285     890    2470     840    2519 
+               916     755     891    2470     839    2520 
+               891     780     891    2474     860    2495 
+               892     778     917     754     890     780 
+               891     781     864     804     917    2443 
+               865     805     891     779     866    2495 
+               864     805     892     779     891    2469 
+               865    2495     891    2469     866 
+ 
+ 
+           name INFO 
+              3449    3231     918    2441     920    2440 
+               920     750     947    2414     920    2440 
+               920     750     894     777     919     750 
+               947    2413     921     750     919     750 
+               920     751     919     752     918    2441 
+               921     749     895     776     919    2441 
+               920    2440     920    2441     920     749 
+               921    2439     921    2440     921 
+ 
+           name UP 
+              3396    3285     915    2444     919    2442 
+               918     752     916    2444     919    2441 
+               919     751     916    2445     919     751 
+               890     780     916     753     917     754 
+               942     729     889     780     916    2445 
+               919     751     915     756     914    2448 
+               916     752     916    2444     918    2442 
+               919    2441     918    2443     918 
+ 
+           name DOWN 
+              3421    3261     890    2470     918    2442 
+               919     751     916    2446     917    2441 
+               919    2442     918    2442     918     752 
+               916    2444     919     751     890     780 
+               916     755     915     755     915    2445 
+               919     753     914     755     889     781 
+               889     781     916    2444     919     752 
+               889    2471     919    2441     918 
+ 
+           name LEFT 
+              3427    3255     918    2441     924    2437 
+               920     750     918    2442     920    2441 
+               919    2440     921    2439     921     750 
+               919     751     944     726     919     752 
+               917     753     918     751     944    2417 
+               920     750     893     777     919     751 
+               919     752     918    2441     921    2440 
+               920    2440     920    2440     921 
+ 
+           name RIGHT 
+              3424    3258     892    2466     921    2439 
+               896     774     920    2441     920    2440 
+               920     750     920     751     945    2414 
+               921     750     919     751     920     750 
+               919     752     919     751     919    2440 
+               921     750     918     752     918    2442 
+               920    2440     921     749     918    2443 
+               920    2440     920    2441     919 
+ 
+           name SELECT 
+              3424    3257     944    2416     919    2442 
+               919     750     918    2442     920    2441 
+               919     751     943     727     918    2442 
+               920    2440     920     752     916     752 
+               969     702     917     753     892    2468 
+               919     751     892     778     918    2442 
+               924    2436     921     750     917     753 
+               918    2443     919    2441     919 
+ 
+           name SETTINGS 
+              3402    3278     871    2491     921    2438 
+               921     749     922    2440     919    2441 
+               919    2440     921     749     921     750 
+               895    2465     920    2440     921    2440 
+               920     749     896     775     921    2439 
+               920     749     923     748     895     775 
+               922    2439     920    2440     920     749 
+               897     774     896     774     921 
+ 
+           name EXIT 
+              3400    3279     896    2464     921    2439 
+               921     750     895    2465     921    2439 
+               921     749     898     772     896    2465 
+               920    2440     920     750     920    2441 
+               920     749     896     774     870    2491 
+               921     749     921     749     895    2465 
+               921    2440     920     749     922     748 
+               897    2464     920     750     896 
+ 
+           name PGUP 
+              3425    3255     920    2440     920    2440 
+               921     749     895    2466     920    2440 
+               920     749     920    2441     896    2464 
+               921     749     919    2445     917    2440 
+               920     750     920     750     920    2441 
+               921     748     921     749     920    2440 
+               921     750     919     752     919    2440 
+               921     749     921     750     919 
+ 
+           name PGDN 
+              3400    3281     921    2438     921    2441 
+               920     749     895    2465     896    2465 
+               920    2440     920    2440     920    2440 
+               921     749     896    2465     895    2465 
+               920     750     895     775     920    2440 
+               921     749     921     750     895     775 
+               896     774     896     774     921    2439 
+               921     749     921     751     894 
+ 
+           name VOLUP 
+               995     778    1886     779     994     775 
+               995     777     993     774     996     774 
+               995     775     995    1654    1885     778 
+               995     775     995     774     995 
+ 
+           name VOLDN 
+               996     778     971     802    1862     803 
+               970     799     996     774     995     774 
+               996     774     995    1654    1886     778 
+               996     773     971    1678     991 
+ 
+           name CHUP 
+              3421    3259     916    2444     918    2443 
+               918     751     917    2444     919    2441 
+               919    2441     919     751     916    2444 
+               919    2441     919    2443     918     751 
+               941     729     916     755     917    2442 
+               919     752     916     754     891     778 
+               918    2444     918     751     916     754 
+               917     753     916    2445     919 
+ 
+           name CHDN 
+              3421    3260     915    2445     918    2442 
+               919     751     891    2469     919    2441 
+               927     745     915    2444     919    2441 
+               919    2441     919    2442     918     752 
+               915     755     890     780     917    2443 
+               919     752     916     754     915    2445 
+               919     751     915     755     890     781 
+               914     756     916    2445     917 
+ 
+           name A 
+              3425    3258     916    2442     920    2441 
+               919     751     918    2442     919    2441 
+               920    2440     920    2441     919    2441 
+               919    2441     920     750     917    2443 
+               920     751     917     752     919    2442 
+               920     750     918     753     917     753 
+               917     753     942     728     917     753 
+               918    2442     920     750     942 
+ 
+           name B 
+              3398    3283     916    2443     892    2470 
+               892     778     892    2468     891    2475 
+               886     779     916     754     892     777 
+               892     778     919    2442     891    2468 
+               918     753     892     778     891    2469 
+               892     778     892     778     918    2443 
+               891    2469     892    2467     893    2469 
+               891     778     918     753     892 
+ 
+           name C 
+              3396    3283     891    2469     892    2468 
+               892     778     917    2444     892    2468 
+               892    2469     891     778     892     779 
+               893     777     892    2468     892    2468 
+               918     752     893     777     892    2469 
+               892     778     892     778     867     802 
+               918    2444     917    2442     868    2492 
+               893     778     892     779     916 
+ 
+           name 1 
+              3424    3257     890    2470     865    2495 
+               891     780     892    2468     865    2495 
+               892     777     891     780     892     779 
+               890     780     916    2444     865     805 
+               891     779     917     753     916    2445 
+               865     805     916     754     892    2469 
+               865    2494     916    2445     865    2495 
+               891     779     917    2443     866 
+ 
+           name 2 
+              3422    3258     916    2444     865    2496 
+               889     782     915    2444     865    2495 
+               917    2444     839     830     891     780 
+               915     755     890    2470     864     806 
+               917     753     891     780     866    2495 
+               864     805     891     779     892     779 
+               865    2494     865    2496     891    2469 
+               865     805     891    2469     865 
+ 
+           name 3 
+              3397    3284     916    2443     892    2468 
+               892     779     893    2467     892    2468 
+               917     753     892    2469     891     778 
+               893     778     891    2469     892     778 
+               918     753     890     779     893    2468 
+               891     779     893     778     891    2469 
+               892     777     893    2468     891    2468 
+               917     754     943    2417     892 
+ 
+           name 4 
+              3421    3261     890    2470     839    2520 
+               917     753     891    2470     865    2495 
+               917    2443     865    2495     890     781 
+               891     778     891    2470     865     804 
+               895     776     892     779     891    2468 
+               866     805     917     753     943     727 
+               866     805     889    2471     865    2494 
+               892     780     916    2444     865 
+ 
+           name 5 
+              3396    3282     920    2441     892    2467 
+               894     778     891    2468     892    2469 
+               891     780     866     802     893    2470 
+               890     779     918    2443     891     777 
+               892     779     918     752     892    2468 
+               892     779     918     752     918    2443 
+               891    2469     891     779     891    2469 
+               892     778     891    2468     893 
+ 
+           name 6 
+              3396    3284     918    2442     866    2494 
+               892     778     917    2444     866    2494 
+               917    2444     865     804     893    2468 
+               890     780     916    2445     890     779 
+               892     779     891     778     918    2443 
+               891     778     892     779     892     779 
+               891    2468     892     778     919    2444 
+               889     778     893    2468     891 
+ 
+           name 7 
+              3398    3282     893    2467     892    2468 
+               893     779     891    2469     891    2468 
+               919     752     892    2467     892    2469 
+               891     779     892    2468     892     777 
+               893     778     918     752     892    2468 
+               893     779     916     753     918    2442 
+               892     779     891     778     893    2468 
+               892     778     893    2467     892 
+ 
+           name 8 
+              3448    3232     892    2468     866    2494 
+               892     779     892    2467     867    2494 
+               891    2469     866    2495     891    2469 
+               865     805     968    2394     864     804 
+               918     753     891     779     892    2468 
+               866     804     917     754     891     780 
+               916     752     917     754     892    2469 
+               865     804     893    2468     890 
+ 
+           name 9 
+              3422    3258     891    2469     839    2521 
+               891     780     892    2468     824    2536 
+               916     754     916     755     891     779 
+               866    2494     839    2522     891     778 
+               892     778     890     781     915    2448 
+               837     831     891     779     890    2470 
+               837    2523     942    2418     838     832 
+               892     778     890    2471     839 
+ 
+           name 0 
+              3398    3284     891    2469     890    2469 
+               893     779     891    2468     892    2468 
+               892    2468     892     778     892     779 
+               891    2469     892    2468     893     778 
+               892     777     893     777     893    2469 
+               891     778     892     779     868     802 
+               917    2443     892    2469     890     779 
+               891     779     892    2468     893 
+ 
+           name LAST 
+              3422    3258     891    2471     916    2443 
+               891     780     891    2469     272    3088 
+               865     805     916    2445     308    3052 
+               890    2469     892     779     915     756 
+               889     781     889     780     890    2471 
+               890     779     889     781     891    2471 
+               272    1397     890     779     891     781 
+               890    2469     448    2912     917 
+ 
+           name FAV 
+              3423    3257     918    2442     944    2417 
+               917     753     892    2469     890    2471 
+               324    3036     890    2469     379     289 
+               167    2525     891    2470     379    2981 
+               890     780     378     270     242     781 
+               866     806     889    2469     786     884 
+               891     779     891     779     892     779 
+               916     754     890     779     892     778 
+               891    2470     839 
+ 
+           name REW 
+              3420    3258     916    2445     326    3033 
+               891     780     916    2443     891    2469 
+               916    2445     838     831     918     754 
+               890    2471     837     832     916    2444 
+               838     832     891     779     916    2445 
+               838     831     892     779     890     780 
+               892    2469     839    2520     891     780 
+               915    2444     836     836     890 
+ 
+           name PLAY 
+              3448    3233     916    2444     891    2469 
+               917     753     892    2468     918    2443 
+               941    2420     891    2468     917     754 
+               915     755     914    2446     918    2443 
+               916     754     916     753     945    2416 
+               943     727     941     729     918     752 
+               917     753     919    2442     916    2444 
+               915     755     943     728     916 
+ 
+           name FF 
+              3420    3259     917    2442     946    2415 
+               918     752     916    2445     918    2441 
+               943     728     917     753     942     728 
+               892    2470     864     806     889    2471 
+               865     805     918     752     916    2443 
+               944     726     892     779     891    2470 
+               891    2469     915    2445     917     753 
+               890    2471     222    1447     891 
+ 
+           name PAUSE 
+              3421    3259     891    2470     787    2573 
+               890     780     916    2444     840    2520 
+               892    2468     864     806     917    2444 
+               839     831     890     780     891     779 
+               891     780     891     779     889    2471 
+               839     831     916     755     915     754 
+               892    2469     839     830     917    2444 
+               840    2521     891    2469     840 
+ 
+           name STOP 
+              3398    3284     889    2471     325    3036 
+               891     779     890    2470     395     290 
+               140    2535     889     781     890     781 
+               889    2470     274    1397     891    2470 
+               272    3087     917     754     890     780 
+               889    2472     293    1377     890     779 
+               916    2444     448    2913     916     754 
+               866    2495     325    1344     891     779 
+               915 
+ 
+           name REC 
+              3421    3258     917    2444     916    2444 
+               942     729     942    2420     889    2469 
+               992    2367     942     730     891    2468 
+               917     754     916    2443     892    2470 
+               892     777     916     754     892    2467 
+               943     730     916     754     891     779 
+               917    2442     917     754     943    2417 
+               918     753     915     754     892 
+ 
+           name BYPASS 
+              3450    3231     891    2470     890    2470 
+               917     753     916    2447     913    2445 
+               273    3088     889     780     890    2470 
+               891    2469     916     755     890     780 
+               942     727     918     752     916    2444 
+               890     782     916     754     865     805 
+               891    2469     891     780     889     781 
+               891    2468     259    3102     866 
+ 
+           name TV/VCR 
+             19945    3915     612    1873     560    1926 
+               560    1925     561     931     560     931 
+               587     905     559     931     563     931 
+               557     932     561    1925     585     908 
+               583    1901     559     931     586     905 
+               585     907     610    1875     561    1924 
+               561    1926     559    1926     535    1951 
+               559    1925     586     907     585    1899 
+               560     931    1048    7898    3707    3862 
+               587    1899     586    1899     586    1900 
+               559     932     586     908     323 
+ 
+       end raw_codes 
+ 
+ end remote
diff --git a/abs/core-testing/live-installer/templates/xine.config.template b/abs/core-testing/live-installer/templates/xine.config.template
new file mode 100644
index 0000000..966487f
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xine.config.template
@@ -0,0 +1,754 @@
+#
+# xine config file
+#
+.version:2
+
+# Entries which are still set to their default values are commented out.
+# Remove the '#' at the beginning of the line, if you want to change them.
+
+# Enable deinterlacing by default
+# bool, default: 0
+#gui.deinterlace_by_default:0
+
+# Configuration experience level
+# { Beginner  Advanced  Expert  Master of the known universe }, default: 0
+gui.experience_level:Expert
+
+# Enable OSD support
+# bool, default: 1
+#gui.osd_enabled:1
+
+# Dismiss OSD time (s)
+# numeric, default: 3
+#gui.osd_timeout:3
+
+# Ask user for playback with unsupported codec
+# bool, default: 0
+#gui.play_anyway:0
+
+# Automatically reload old playlist
+# bool, default: 0
+#gui.playlist_auto_reload:0
+
+# Audio visualization plugin
+# { oscope  fftscope  fftgraph  goom }, default: 0
+gui.post_audio_plugin:fftgraph
+
+# gui skin theme
+# { Antares  Centori  KeramicRH8  cloudy  xinetic }, default: 4
+gui.skin:KeramicRH8
+
+# Change xine's behavior for unexperienced user
+# bool, default: 1
+#gui.smart_mode:1
+
+# Snapshot location
+# string, default: /home/jams
+#gui.snapshotdir:/home/jams
+
+# Display splash screen
+# bool, default: 1
+gui.splash:0
+
+# Subtitle autoloading
+# bool, default: 1
+#gui.subtitle_autoload:1
+
+# Visual animation style
+# { None  Post Plugin  Stream Animation }, default: 1
+#gui.visual_anim:Post Plugin
+
+# Windows stacking (more)
+# bool, default: 0
+#gui.always_layer_above:0
+
+# Audio mixer control method
+# { Sound card  Software }, default: 0
+#gui.audio_mixer_method:Sound card
+
+# Visiblility behavior of panel
+# bool, default: 0
+#gui.auto_panel_visibility:0
+
+# Visibility behavior of output window
+# bool, default: 0
+#gui.auto_video_output_visibility:0
+
+# Deinterlace plugin.
+# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
+#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
+
+# Event sender behavior
+# bool, default: 1
+#gui.eventer_sticky:1
+
+# Windows stacking
+# bool, default: 0
+#gui.layer_above:0
+
+# Use unscaled OSD
+# bool, default: 1
+gui.osd_use_unscaled:0
+
+# Screensaver reset interval (s)
+# numeric, default: 10
+#gui.screensaver_timeout:10
+
+# Menu shortcut style
+# { Windows style  Emacs style }, default: 0
+#gui.shortcut_style:Windows style
+
+# Stream information
+# bool, default: 0
+#gui.sinfo_auto_update:0
+
+# Skin Server Url
+# string, default: http://xine.sourceforge.net/skins/skins.slx
+#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
+
+# Chapter hopping
+# bool, default: 1
+#gui.skip_by_chapter:1
+
+# New stream sizes resize output window
+# bool, default: 1
+#gui.stream_resize_window:1
+
+# Tips timeout (ms)
+# numeric, default: 5000
+#gui.tips_timeout:5000
+
+# gui tips visibility
+# bool, default: 1
+#gui.tips_visible:1
+
+# Name of video display
+# string, default:
+#gui.video_display:
+
+# Synchronized X protocol (debug)
+# bool, default: 0
+#gui.xsynchronize:0
+
+# Double size for small streams (require stream_resize_window)
+# bool, default: 0
+#gui.zoom_small_stream:0
+
+# Logo mrl
+# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
+#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
+
+# use XVidModeExtension when switching to fullscreen
+# bool, default: 0
+#gui.use_xvidext:0
+
+# height for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_height:-8192
+
+# width for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_width:-8192
+
+# x coordinate for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_x:-8192
+
+# y coordinate for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_y:-8192
+
+# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3)
+# string, default: 0 1
+#gui.xinerama_use_screens:0 1
+
+# Amplification level
+# [0..200], default: 100
+#gui.amp_level:100
+
+# gui panel visibility
+# bool, default: 1
+gui.panel_visible:0
+
+# numeric, default: 200
+gui.panel_x:21
+
+# numeric, default: 100
+gui.panel_y:1050
+
+gui.control_x:186
+
+gui.control_y:46
+
+gui.dropped_frames_warning:0
+
+gui.eventer_x:1041
+
+gui.eventer_y:781
+
+gui.mrl_browser_x:23
+
+gui.mrl_browser_y:9
+
+gui.setup_x:717
+
+gui.setup_y:227
+
+gui.viewlog_x:200
+
+gui.viewlog_y:210
+
+# color specification yuv-opacity
+# string, default: 8080c0-f
+#gui.osdmenu.color_focused_button:8080c0-f
+
+# color specification yuv-opacity
+# string, default: 808080-f
+#gui.osdmenu.color_focused_slider:808080-f
+
+# color specification yuv-opacity
+# string, default: ff8080-f
+#gui.osdmenu.color_focused_slider_knob:ff8080-f
+
+# color specification yuv-opacity
+# string, default: 808080-f
+#gui.osdmenu.color_focused_text_border:808080-f
+
+# color specification yuv-opacity
+# string, default: ff8080-f
+#gui.osdmenu.color_focused_text_foreground:ff8080-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_label_border:0080c0-f
+
+# color specification yuv-opacity
+# string, default: c08080-f
+#gui.osdmenu.color_label_foreground:c08080-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_label_window:0080c0-f
+
+# color specification yuv-opacity
+# string, default: 008000-f
+#gui.osdmenu.color_slider:008000-f
+
+# color specification yuv-opacity
+# string, default: ffff00-f
+#gui.osdmenu.color_slider_knob:ffff00-f
+
+# color specification yuv-opacity
+# string, default: 008000-f
+#gui.osdmenu.color_text_border:008000-f
+
+# color specification yuv-opacity
+# string, default: ffff00-f
+#gui.osdmenu.color_text_foreground:ffff00-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_text_window:0080c0-f
+
+# directory a media in dvd device will be mounted
+# string, default: /dvd
+#gui.osdmenu.dvd_mountpoint:/dvd
+
+# palette (foreground-border-background) to use for subtitles and OSD
+# { white-black-transparent  white-none-transparent  white-none-translucid  yellow-black-transparent }, default: 0
+#ui.osd.text_palette:white-black-transparent
+
+# audio driver to use
+# { auto  null  alsa  oss  esd  file  none }, default: 0
+audio.driver:oss
+
+# a/v sync method to use by OSS
+# { auto  getodelay  getoptr  softsync  probebuffer }, default: 0
+#audio.oss_sync_method:auto
+
+# use A/52 dynamic range compression
+# bool, default: 0
+#audio.a52.dynamic_range:0
+
+# downmix audio to 2 channel surround stereo
+# bool, default: 0
+#audio.a52.surround_downmix:0
+
+# A/52 volume
+# [0..200], default: 100
+#audio.a52.level:100
+
+# OSS audio device name
+# { auto  /dev/dsp  /dev/sound/dsp }, default: 0
+#audio.device.oss_device_name:auto
+
+# OSS audio device number, -1 for none
+# numeric, default: -1
+#audio.device.oss_device_number:-1
+
+# OSS audio mixer number, -1 for none
+# numeric, default: -1
+#audio.device.oss_mixer_number:-1
+
+audio.device.alsa_front_device:default
+
+# speaker arrangement
+# { Mono 1.0  Stereo 2.0  Headphones 2.0  Stereo 2.1  Surround 3.0  Surround 4.0  Surround 4.1  Surround 5.0  Surround 5.1  Surround 6.0  Surround 6.1  Surround 7.1  Pass Through }, default: 1
+#audio.output.speaker_arrangement:Stereo 2.0
+
+# offset for digital passthrough
+# numeric, default: 0
+#audio.synchronization.passthrough_offset:0
+
+# play audio even on slow/fast speeds
+# bool, default: 0
+#audio.synchronization.slow_fast_audio:0
+
+# method to sync audio and video
+# { metronom feedback  resample }, default: 0
+#audio.synchronization.av_sync_method:metronom feedback
+
+# always resample to this rate (0 to disable)
+# numeric, default: 0
+#audio.synchronization.force_rate:0
+
+# enable resampling
+# { auto  off  on }, default: 0
+#audio.synchronization.resample_mode:auto
+
+# startup audio volume
+# [0..100], default: 50
+#audio.volume.mixer_volume:50
+
+# restore volume level at startup
+# bool, default: 0
+#audio.volume.remember_volume:0
+
+# video driver to use
+# { auto  aadxr3  dxr3  xv  opengl  SyncFB  xshm  none  xxmc  sdl  vidixfb  vidix  fb  xvmc }, default: 0
+#video.driver:auto
+
+# pitch alignment workaround
+# bool, default: 0
+#video.device.xv_pitch_alignment:0
+
+# disable exact alpha blending of overlays
+# bool, default: 0
+#video.output.disable_exact_alphablend:0
+
+# disable all video scaling
+# bool, default: 0
+#video.output.disable_scaling:0
+
+# horizontal image position in the output window
+# [0..100], default: 50
+#video.output.horizontal_position:50
+
+# vertical image position in the output window
+# [0..100], default: 50
+#video.output.vertical_position:50
+
+# deinterlace method (deprecated)
+# { none  bob  weave  greedy  onefield  onefield_xv  linearblend }, default: 4
+video.output.xv_deinterlace_method:linearblend
+
+# MPEG-4 postprocessing quality
+# [0..6], default: 3
+#video.processing.ffmpeg_pp_quality:3
+
+# DXR3 device number
+# numeric, default: 0
+#dxr3.device_number:0
+
+# swap odd and even lines
+# bool, default: 0
+#dxr3.encoding.swap_fields:0
+
+# add black bars to correct aspect ratio
+# bool, default: 1
+#dxr3.encoding.add_bars:1
+
+# use smooth play mode for mpeg encoder playback
+# bool, default: 1
+#dxr3.encoding.alt_play_mode:1
+
+# device used for CD audio
+# string, default: /dev/cdrom
+#media.audio_cd.device:/dev/cdrom
+
+# slow down disc drive to this speed factor
+# numeric, default: 4
+#media.audio_cd.drive_slowdown:4
+
+# query CDDB
+# bool, default: 1
+#media.audio_cd.use_cddb:1
+
+# CDDB cache directory
+# string, default: /home/jams/.xine/cddbcache
+#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache
+
+# CDDB server port
+# numeric, default: 8880
+#media.audio_cd.cddb_port:8880
+
+# CDDB server name
+# string, default: freedb.freedb.org
+#media.audio_cd.cddb_server:freedb.freedb.org
+
+# directory for saving streams
+# string, default:
+#media.capture.save_dir:
+
+# Number of dvb card to use.
+# numeric, default: 0
+#media.dvb.adapter:0
+
+# Remember last DVB channel watched
+# bool, default: 1
+#media.dvb.remember_channel:1
+
+# Last DVB channel viewed
+# numeric, default: -1
+#media.dvb.last_channel:-1
+
+# default language for DVD playback
+# string, default: en
+#media.dvd.language:en
+
+# region the DVD player claims to be in (1 to 8)
+# numeric, default: 1
+#media.dvd.region:1
+
+# device used for DVD playback
+# string, default: /dev/dvd
+#media.dvd.device:/dev/dvd
+
+# raw device set up for DVD access
+# string, default: /dev/rdvd
+#media.dvd.raw_device:/dev/rdvd
+
+# read-ahead caching
+# bool, default: 1
+#media.dvd.readahead:1
+
+# CSS decryption method
+# { key  disc  title }, default: 0
+#media.dvd.css_decryption_method:key
+
+# play mode when title/chapter is given
+# { entire dvd  one chapter }, default: 0
+#media.dvd.play_single_chapter:entire dvd
+
+# unit for seeking
+# { seek in program chain  seek in program }, default: 0
+#media.dvd.seek_behaviour:seek in program chain
+
+# unit for the skip action
+# { skip program  skip part  skip title }, default: 0
+#media.dvd.skip_behaviour:skip program
+
+# path to the title key cache
+# string, default: /home/jams/.dvdcss/
+#media.dvd.css_cache_path:/home/jams/.dvdcss/
+
+# file browsing start location
+# string, default: /home/jams
+#media.files.origin_path:/home/jams
+
+# list hidden files
+# bool, default: 0
+#media.files.show_hidden_files:0
+
+# network bandwidth
+# { 14.4 Kbps (Modem)  19.2 Kbps (Modem)  28.8 Kbps (Modem)  33.6 Kbps (Modem)  34.4 Kbps (Modem)  57.6 Kbps (Modem)  115.2 Kbps (ISDN)  262.2 Kbps (Cable/DSL)  393.2 Kbps (Cable/DSL)  524.3 Kbps (Cable/DSL)  1.5 Mbps (T1)  10.5 Mbps (LAN) }, default: 10
+#media.network.bandwidth:1.5 Mbps (T1)
+
+# Timeout for network stream reading (in seconds)
+# numeric, default: 30
+#media.network.timeout:30
+
+# Domains for which to ignore the HTTP proxy
+# string, default:
+#media.network.http_no_proxy:
+
+# HTTP proxy host
+# string, default:
+#media.network.http_proxy_host:
+
+# HTTP proxy password
+# string, default:
+#media.network.http_proxy_password:
+
+# HTTP proxy port
+# numeric, default: 80
+#media.network.http_proxy_port:80
+
+# HTTP proxy username
+# string, default:
+#media.network.http_proxy_user:
+
+# MMS protocol
+# { auto  TCP  HTTP }, default: 0
+#media.network.mms_protocol:auto
+
+# automatically advance VCD track/entry
+# bool, default: 1
+#media.vcd.autoadvance:1
+
+# VCD default type to use on autoplay
+# { MPEG track  entry  segment  playback-control item }, default: 3
+#media.vcd.autoplay:playback-control item
+
+# CD-ROM drive used for VCD when none given
+# string, default:
+#media.vcd.device:
+
+# VCD position slider range
+# { auto  track  entry }, default: 0
+#media.vcd.length_reporting:auto
+
+# show 'rejected' VCD LIDs
+# bool, default: 0
+#media.vcd.show_rejected:0
+
+# VCD format string for stream comment field
+# string, default: %P - Track %T
+#media.vcd.comment_format:%P - Track %T
+
+# VCD debug flag mask
+# numeric, default: 0
+#media.vcd.debug:0
+
+# VCD format string for display banner
+# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
+#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
+
+# v4l radio device
+# string, default: /dev/v4l/radio0
+#media.video4linux.radio_device:/dev/v4l/radio0
+
+# v4l video device
+# string, default: /dev/v4l/video0
+#media.video4linux.video_device:/dev/v4l/video0
+
+# device used for WinTV-PVR 250/350 (pvr plugin)
+# string, default: /dev/video0
+#media.wintv_pvr.device:/dev/video0
+
+# path to RealPlayer codecs
+# string, default: /usr/lib/win32
+#decoder.external.real_codecs_path:/usr/lib/win32
+
+# path to Win32 codecs
+# string, default: /usr/lib/win32
+#decoder.external.win32_codecs_path:/usr/lib/win32
+
+# subtitle size
+# { tiny  small  normal  large  very large  huge }, default: 1
+#subtitles.separate.subtitle_size:small
+
+# subtitle vertical offset
+# numeric, default: 0
+#subtitles.separate.vertical_offset:0
+
+# font for subtitles
+# string, default: sans
+#subtitles.separate.font:sans
+
+# encoding of the subtitles
+# string, default: iso-8859-1
+#subtitles.separate.src_encoding:iso-8859-1
+
+# use unscaled OSD if possible
+# bool, default: 1
+#subtitles.separate.use_unscaled_osd:1
+
+# default duration of subtitle display in seconds
+# numeric, default: 4
+#subtitles.separate.timeout:4
+
+# frames per second to generate
+# numeric, default: 14
+#effects.goom.fps:14
+
+# goom image height
+# numeric, default: 240
+#effects.goom.height:240
+
+# goom image width
+# numeric, default: 320
+#effects.goom.width:320
+
+# colorspace conversion method
+# { Fast but not photorealistic  Slow but looks better }, default: 0
+#effects.goom.csc_method:Fast but not photorealistic
+
+# number of audio buffers
+# numeric, default: 230
+#engine.buffers.audio_num_buffers:230
+
+# number of video buffers
+# numeric, default: 500
+#engine.buffers.video_num_buffers:500
+
+# default number of video frames
+# numeric, default: 15
+#engine.buffers.video_num_frames:15
+
+# priority for a/52 decoder
+# numeric, default: 0
+#engine.decoder_priorities.a/52:0
+
+# priority for bitplane decoder
+# numeric, default: 0
+#engine.decoder_priorities.bitplane:0
+
+# priority for dts decoder
+# numeric, default: 0
+#engine.decoder_priorities.dts:0
+
+# priority for dvaudio decoder
+# numeric, default: 0
+#engine.decoder_priorities.dvaudio:0
+
+# priority for dxr3-mpeg2 decoder
+# numeric, default: 0
+#engine.decoder_priorities.dxr3-mpeg2:0
+
+# priority for dxr3-spudec decoder
+# numeric, default: 0
+#engine.decoder_priorities.dxr3-spudec:0
+
+# priority for faad decoder
+# numeric, default: 0
+#engine.decoder_priorities.faad:0
+
+# priority for ffmpeg-wmv8 decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpeg-wmv8:0
+
+# priority for ffmpeg-wmv9 decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpeg-wmv9:0
+
+# priority for ffmpegaudio decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpegaudio:0
+
+# priority for ffmpegvideo decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpegvideo:0
+
+# priority for gdkpixbuf decoder
+# numeric, default: 0
+#engine.decoder_priorities.gdkpixbuf:0
+
+# priority for gsm610 decoder
+# numeric, default: 0
+#engine.decoder_priorities.gsm610:0
+
+# priority for image decoder
+# numeric, default: 0
+#engine.decoder_priorities.image:0
+
+# priority for mad decoder
+# numeric, default: 0
+#engine.decoder_priorities.mad:0
+
+# priority for mpc decoder
+# numeric, default: 0
+#engine.decoder_priorities.mpc:0
+
+# priority for mpeg2 decoder
+# numeric, default: 0
+#engine.decoder_priorities.mpeg2:0
+
+# priority for nsf decoder
+# numeric, default: 0
+#engine.decoder_priorities.nsf:0
+
+# priority for pcm decoder
+# numeric, default: 0
+#engine.decoder_priorities.pcm:0
+
+# priority for qta decoder
+# numeric, default: 0
+#engine.decoder_priorities.qta:0
+
+# priority for qtv decoder
+# numeric, default: 0
+#engine.decoder_priorities.qtv:0
+
+# priority for real decoder
+# numeric, default: 0
+#engine.decoder_priorities.real:0
+
+# priority for realadec decoder
+# numeric, default: 0
+#engine.decoder_priorities.realadec:0
+
+# priority for rgb decoder
+# numeric, default: 0
+#engine.decoder_priorities.rgb:0
+
+# priority for spucc decoder
+# numeric, default: 0
+#engine.decoder_priorities.spucc:0
+
+# priority for spucmml decoder
+# numeric, default: 0
+#engine.decoder_priorities.spucmml:0
+
+# priority for spudec decoder
+# numeric, default: 0
+#engine.decoder_priorities.spudec:0
+
+# priority for spudvb decoder
+# numeric, default: 0
+#engine.decoder_priorities.spudvb:0
+
+# priority for sputext decoder
+# numeric, default: 0
+#engine.decoder_priorities.sputext:0
+
+# priority for theora decoder
+# numeric, default: 0
+#engine.decoder_priorities.theora:0
+
+# priority for vorbis decoder
+# numeric, default: 0
+#engine.decoder_priorities.vorbis:0
+
+# priority for win32a decoder
+# numeric, default: 0
+#engine.decoder_priorities.win32a:0
+
+# priority for win32v decoder
+# numeric, default: 0
+#engine.decoder_priorities.win32v:0
+
+# priority for yuv decoder
+# numeric, default: 0
+#engine.decoder_priorities.yuv:0
+
+# media format detection strategy
+# { default  reverse  content  extension }, default: 0
+#engine.demux.strategy:default
+
+# memcopy method used by xine
+# { probe  libc  kernel  mmx  mmxext  sse }, default: 0
+engine.performance.memcpy_method:libc
+
+# percentage of discarded frames to tolerate
+# numeric, default: 10
+#engine.performance.warn_discarded_threshold:10
+
+# percentage of skipped frames to tolerate
+# numeric, default: 10
+#engine.performance.warn_skipped_threshold:10
+
+# allow implicit changes to the configuration (e.g. by MRL)
+# bool, default: 0
+#misc.implicit_config:0
+
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.ATSC b/abs/core-testing/live-installer/templates/xorg/modeline.ATSC
new file mode 100644
index 0000000..b2cd709
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/modeline.ATSC
@@ -0,0 +1,33 @@
+ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750
+
+ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525
+
+ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync
+
+ModeLine "My720p"  73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync  74.086 MHz 44.955 kHz 5$
+
+ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync  74.086 MHz 44.955 kHz 5$
+
+ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace
+
+ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace
+
+Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace
+
+Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace
+
+Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace
+
+Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace
+
+Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace
+
+Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace
+
+Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135
+
+Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace
+
+Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+
+Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.DVD b/abs/core-testing/live-installer/templates/xorg/modeline.DVD
new file mode 100644
index 0000000..9e846d0
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/modeline.DVD
@@ -0,0 +1,9 @@
+#DVD-NativeModes
+ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace
+ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace
+ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.NTSC b/abs/core-testing/live-installer/templates/xorg/modeline.NTSC
new file mode 100644
index 0000000..5536c1b
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/modeline.NTSC
@@ -0,0 +1,10 @@
+#Analog-RegularModes
+ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace
+ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525
+ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace
+ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525
+ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace
+ModeLine "Broadcast-59.94p" 483 484 492 525
+ModeLine "VHS-59.94i" 483 484 492 525 Interlace
+ModeLine "VHS-59.94p" 483 484 492 525
+
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.VESA b/abs/core-testing/live-installer/templates/xorg/modeline.VESA
new file mode 100644
index 0000000..a026f64
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/modeline.VESA
@@ -0,0 +1,163 @@
+# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "640x350"    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
+
+# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "640x400"    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
+
+# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "720x400"    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
+
+# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
+ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
+
+# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
+ModeLine "640x480"    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
+
+# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
+ModeLine "640x480"    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
+
+# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
+ModeLine "640x480"    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
+
+# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
+ModeLine "800x600"    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
+
+# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
+ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
+
+# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
+ModeLine "800x600"    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
+
+# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
+ModeLine "800x600"    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
+
+# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
+ModeLine "800x600"    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
+
+# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
+ModeLine "1024x768"   44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
+
+# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
+ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
+
+# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
+ModeLine "1024x768"   75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
+
+# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
+ModeLine "1024x768"   78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
+
+# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
+ModeLine "1024x768"   94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
+
+# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
+ModeLine "1152x864"  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
+
+# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
+ModeLine "1280x960"  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
+
+# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
+ModeLine "1280x960"  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
+
+# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
+ModeLine "1280x1024" 108.0 1280 1328 1440 1688   1024 1025 1028 1066 +hsync +vsync
+
+# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
+ModeLine "1280x1024" 135.0 1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
+
+# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
+ModeLine "1280x1024" 157.5 1280 1344 1504 1728   1024 1025 1028 1072 +hsync +vsync
+
+# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
+ModeLine "1600x1200" 162.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
+# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
+ModeLine "1600x1200" 175.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
+ModeLine "1600x1200" 189.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
+ModeLine "1600x1200" 202.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
+ModeLine "1600x1200" 229.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
+
+# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
+ModeLine "1792x1344" 204.8 1792 1920 2120 2448   1344 1345 1348 1394 -hsync +vsync
+
+# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
+ModeLine "1792x1344" 261.0 1792 1888 2104 2456   1344 1345 1348 1417 -hsync +vsync
+
+# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
+ModeLine "1856x1392" 218.3 1856 1952 2176 2528   1392 1393 1396 1439 -hsync +vsync
+
+# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
+ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 -hsync +vsync
+
+# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
+ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 -hsync +vsync
+
+# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
+ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 -hsync +vsync
+
+# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
+ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
+
+# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
+ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
+
+# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
+ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
+
+# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
+ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
+
+# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
+ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
+
+# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
+ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
+
+# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
+ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
+
+# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
+ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
+
+# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
+ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
+
+# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
+ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
+
+# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
+ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
+
+# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
+ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
+
+# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
+ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
+
+# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
+ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
+
+# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
+ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
+
+# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
+ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
+
+# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
+ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
+
+# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
+ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
+
+# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
+ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
+
+# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
+ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
+
+# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
+ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.custom b/abs/core-testing/live-installer/templates/xorg/modeline.custom
new file mode 100644
index 0000000..ca6d678
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/modeline.custom
@@ -0,0 +1 @@
+ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati b/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati
new file mode 100644
index 0000000..c6d9249
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati
@@ -0,0 +1,94 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "aticonfig-Screen[0]" 0 0
+	InputDevice    "Mouse0" "CorePointer"
+	InputDevice    "Keyboard0" "CoreKeyboard"
+EndSection
+
+Section "Files"
+	RgbPath      "/usr/share/X11/rgb"
+	ModulePath   "/usr/lib/xorg/modules"
+	FontPath     "/usr/share/fonts/misc"
+	FontPath     "/usr/share/fonts/75dpi"
+	FontPath     "/usr/share/fonts/100dpi"
+	FontPath     "/usr/share/fonts/TTF"
+	FontPath     "/usr/share/fonts/Type1"
+EndSection
+
+Section "Module"
+	Load  "xtrap"
+	Load  "dbe"
+	Load  "record"
+	Load  "extmod"
+	Load  "dri"
+	Load  "type1"
+	Load  "freetype"
+EndSection
+
+Section "InputDevice"
+	Identifier  "Keyboard0"
+	Driver      "kbd"
+EndSection
+
+Section "InputDevice"
+	Identifier  "Mouse0"
+	Driver      "mouse"
+	Option	    "Protocol" "auto"
+	Option	    "Device" "/dev/input/mice"
+	Option	    "ZAxisMapping" "4 5 6 7"
+EndSection
+
+Section "Monitor"
+	Identifier   "Monitor0"
+	VendorName   "Monitor Vendor"
+	ModelName    "Monitor Model"
+EndSection
+
+Section "Monitor"
+	Identifier   "aticonfig-Monitor[0]"
+#	HorizSync    
+#	VertRefresh 
+	Option	    "VendorName" "ATI Proprietary Driver"
+	Option	    "ModelName" "Generic Autodetecting Monitor"
+	Option	    "DPMS" "true"
+EndSection
+
+Section "Device"
+
+        ### Available Driver options are:-
+        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+        ### [arg]: arg optional
+        #Option     "ShadowFB"           	# [<bool>]
+        #Option     "DefaultRefresh"     	# [<bool>]
+        #Option     "ModeSetClearScreen" 	# [<bool>]
+	Identifier  "Card0"
+	Driver      "vesa"
+	VendorName  "ATI Technologies Inc"
+	BoardName   "RV370 5B60 [Radeon X300 (PCIE)]"
+	BusID       "PCI:1:0:0"
+EndSection
+
+Section "Device"
+	Identifier  "aticonfig-Device[0]"
+	Driver      "fglrx"
+#INSERT HERE
+
+#	Option	    "ForceMonitors" "tv,nocrt1,notmds1"
+#	Option	    "TVStandard" "SCART"
+#	Option	    "TVFormat" "PAL-B"
+EndSection
+
+
+Section "Screen"
+	Identifier "aticonfig-Screen[0]"
+	Device     "aticonfig-Device[0]"
+	Monitor    "aticonfig-Monitor[0]"
+	DefaultDepth     24
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+		Modes    "640x480"
+	EndSubSection
+EndSection
+
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel b/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel
new file mode 100644
index 0000000..a4d258a
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel
@@ -0,0 +1,148 @@
+Section "ServerLayout"
+	Identifier     "Xorg Configured"
+	Screen      0  "Screen0" 0 0
+	InputDevice    "Keyboard0" "CoreKeyboard"
+	InputDevice    "PS/2 Mouse" "CorePointer"
+# Serial Mouse not detected
+# USB Mouse not detected
+EndSection
+
+Section "ServerFlags"
+	Option "AllowMouseOpenFail"  "true"
+	
+EndSection
+
+Section "Files"
+	RgbPath      "/usr/share/X11/rgb"
+	ModulePath   "/usr/lib/xorg/modules"
+	FontPath     "/usr/share/fonts/misc:unscaled"
+	FontPath     "/usr/share/fonts/misc"
+	FontPath     "/usr/share/fonts/75dpi:unscaled"
+	FontPath     "/usr/share/fonts/75dpi"
+	FontPath     "/usr/share/fonts/100dpi:unscaled"
+	FontPath     "/usr/share/fonts/100dpi"
+	FontPath     "/usr/share/fonts/PEX"
+# Additional fonts: Locale, Gimp, TTF...
+	FontPath     "/usr/share/fonts/cyrillic"
+#	FontPath     "/usr/share/lib/X11/fonts/latin2/75dpi"
+#	FontPath     "/usr/share/lib/X11/fonts/latin2/100dpi"
+# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
+	FontPath     "/usr/share/fonts/Type1"
+	FontPath     "/usr/share/fonts/ttf/western"
+	FontPath     "/usr/share/fonts/ttf/decoratives"
+	FontPath     "/usr/share/fonts/truetype"
+	FontPath     "/usr/share/fonts/truetype/openoffice"
+	FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
+	FontPath     "/usr/share/fonts/latex-ttf-fonts"
+	FontPath     "/usr/share/fonts/defoma/CID"
+	FontPath     "/usr/share/fonts/defoma/TrueType"
+EndSection
+
+Section "Module"
+        Load  "ddc"  # ddc probing of monitor
+	Load  "dbe"
+	Load  "dri"
+	Load  "extmod"
+	Load  "glx"
+        Load  "bitmap" # bitmap-fonts
+	Load  "type1"
+	Load  "freetype"
+	Load  "record"
+EndSection
+
+Section "InputDevice"
+	Identifier  "Keyboard0"
+	Driver      "keyboard"
+        Option      "CoreKeyboard"
+	Option "XkbRules" "xorg"
+	Option "XkbModel" "pc105"
+	Option "XkbLayout" ""
+	Option "XkbVariant" ""
+EndSection
+
+Section "InputDevice"
+	Identifier  "Serial Mouse"
+	Driver      "mouse"
+	Option      "Protocol" "Microsoft"
+	Option      "Device" "/dev/ttyS0"
+	Option      "Emulate3Buttons" "true"
+	Option      "Emulate3Timeout" "70"
+	Option	    "SendCoreEvents"  "true"
+EndSection
+
+Section "InputDevice"
+	Identifier  "PS/2 Mouse"
+	Driver      "mouse"
+	Option      "Protocol" "auto"
+	Option          "ZAxisMapping"          "4 5"
+	Option      "Device" "/dev/psaux"
+	Option      "Emulate3Buttons" "true"
+	Option      "Emulate3Timeout" "70"
+	Option	    "SendCoreEvents"  "true"
+EndSection
+
+Section "InputDevice"
+        Identifier      "USB Mouse"
+        Driver          "mouse"
+        Option          "Device"                "/dev/input/mice"
+	Option		"SendCoreEvents"	"true"
+        Option          "Protocol"              "IMPS/2"
+        Option          "ZAxisMapping"          "4 5"
+        Option          "Buttons"               "5"
+EndSection
+
+# Auto-generated by Archie mkxcfg
+
+Section "Monitor"
+	Identifier "Monitor0"
+		Option "DPMS" "true"
+EndSection
+
+# Auto-generated by Archie mkxcfg
+
+Section "Device"
+	Identifier  "Card0"
+	Driver      "intel"
+	VendorName  "All"
+	BoardName   "All"
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultColorDepth 16
+	SubSection "Display"
+		Depth     1
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+	SubSection "Display"
+		Depth     4
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+	SubSection "Display"
+		Depth     8
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+	SubSection "Display"
+		Depth     15
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+	SubSection "Display"
+		Depth     16
+		Modes  "800x600" 
+		virtual 800 600 
+	EndSubSection
+	SubSection "Display"
+		Depth     24
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+	SubSection "Display"
+		Depth     32
+		Modes "1024x768" "800x600" "640x480"
+	EndSubSection
+EndSection
+
+Section "DRI"
+	Mode 0666
+EndSection
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia b/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia
new file mode 100755
index 0000000..dec0f42
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia
@@ -0,0 +1,90 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+    Identifier     "Layout0"
+    Screen      0  "Screen0"
+    InputDevice    "Keyboard0" "CoreKeyboard"
+    InputDevice    "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+    RgbPath         "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+    Load           "dbe"
+    Load           "extmod"
+    Load           "type1"
+    Load           "freetype"
+    Load           "glx"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Mouse0"
+    Driver         "mouse"
+    Option         "Protocol" "auto"
+    Option         "Device" "/dev/psaux"
+    Option         "Emulate3Buttons" "no"
+    Option         "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Keyboard0"
+    Driver         "keyboard"
+EndSection
+
+Section "Monitor"
+    Identifier     "Monitor0"
+    VendorName     "Unknown"
+    ModelName      "Unknown"
+#    HorizSync       
+#    VertRefresh    
+    Option         "DPMS" "false"
+    DisplaySize  203 153
+    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
+    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
+    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+#INSERT MODELINE
+EndSection
+
+Section "Device"
+    Identifier     "Device0"
+    Driver         "nvidia"
+    VendorName     "NVIDIA Corporation"
+    Option "DPI" "100 x 100"
+    Option "NoLogo" "1"    
+	
+#INSERT HERE
+
+#END OPTIONS
+
+#    Option "ConnectedMonitor" "DFP"
+#    Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled"
+#    Option "DigitalVibrance" "0"
+#    Option "TransparentIndex" "0"
+#    Option  "CursorShadowAlpha" "64"
+#    Option  "CursorShadowXOffset"  "4"
+#    Option  "UseEdidFreqs" "True"
+#    Option  "NvAGP" "1"
+ 
+
+
+
+EndSection
+
+Section "Screen"
+    Identifier     "Screen0"
+    Device         "Device0"
+    Monitor        "Monitor0"
+    DefaultDepth    24
+    SubSection     "Display"
+        Depth       24
+        Modes     "1280x720" 
+    EndSubSection
+EndSection
+
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.via b/abs/core-testing/live-installer/templates/xorg/xorg.conf.via
new file mode 100644
index 0000000..6dd7821
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/xorg.conf.via
@@ -0,0 +1,77 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+    Identifier     "Layout0"
+    Screen      0  "Screen0"
+    InputDevice    "Keyboard0" "CoreKeyboard"
+    InputDevice    "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+    RgbPath         "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+    Load           "dbe"
+    Load           "glx"
+    Load           "extmod"
+    Load           "type1"
+    Load           "freetype"
+    Load           "dri"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Mouse0"
+    Driver         "mouse"
+    Option         "Protocol" "auto"
+    Option         "Device" "/dev/psaux"
+    Option         "Emulate3Buttons" "no"
+    Option         "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Keyboard0"
+    Driver         "keyboard"
+EndSection
+
+Section "Monitor"
+    Identifier     "Monitor0"
+    VendorName     "Unknown"
+    ModelName      "Unknown"
+    HorizSync       30.0 - 110.0
+    VertRefresh     50.0 - 150.0
+    Option         "DPMS" "false"
+    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
+    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
+    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+EndSection
+
+Section "Device"
+    Identifier     "Device0"
+    Driver         "via"
+    VendorName     "via"
+    Option "DPI" "100 x 100"
+
+
+EndSection
+
+Section "Screen"
+    Identifier     "Screen0"
+    Device         "Device0"
+    Monitor        "Monitor0"
+    DefaultDepth    16
+    SubSection     "Display"
+        Depth       16
+	 Modes "800x600"
+    EndSubSection
+EndSection
+
+Section "DRI"
+	  Group   "video"
+	    Mode    0666
+    EndSection
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware b/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware
new file mode 100755
index 0000000..843f2f4
--- /dev/null
+++ b/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware
@@ -0,0 +1,72 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+    Identifier     "Layout0"
+    Screen      0  "Screen0"
+    InputDevice    "Keyboard0" "CoreKeyboard"
+    InputDevice    "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+    RgbPath         "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+    Load           "dbe"
+    Load           "extmod"
+    Load           "type1"
+    Load           "freetype"
+    Load           "glx"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Mouse0"
+    Driver         "mouse"
+    Option         "Protocol" "auto"
+    Option         "Device" "/dev/psaux"
+    Option         "Emulate3Buttons" "no"
+    Option         "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+    # generated from default
+    Identifier     "Keyboard0"
+    Driver         "keyboard"
+EndSection
+
+Section "Monitor"
+    Identifier     "Monitor0"
+    VendorName     "Unknown"
+    ModelName      "Unknown"
+    HorizSync       30.0 - 110.0
+    VertRefresh     50.0 - 150.0
+    Option         "DPMS" "false"
+    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
+    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
+    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+EndSection
+
+Section "Device"
+    Identifier     "Device0"
+    Driver         "vmware"
+    VendorName     "NVIDIA Corporation"
+    Option "DPI" "100 x 100"
+
+
+EndSection
+
+Section "Screen"
+    Identifier     "Screen0"
+    Device         "Device0"
+    Monitor        "Monitor0"
+    DefaultDepth    24
+    SubSection     "Display"
+        Depth       24
+        Modes     "1280x720" 
+    EndSubSection
+EndSection
+