summaryrefslogtreecommitdiffstats
path: root/abs/core-testing/mdadm/mdadm.conf
diff options
context:
space:
mode:
authorJames Meyer <james.meyer@operamail.com>2010-10-23 18:17:40 (GMT)
committerJames Meyer <james.meyer@operamail.com>2010-10-23 18:19:39 (GMT)
commitadbcf19958300e9b6598990184c8815b945ba0ee (patch)
treef4283c850ac0ac202c17e78a637ee7ca8147621b /abs/core-testing/mdadm/mdadm.conf
parent61a68250df10d29b624650948484898334ff22d0 (diff)
downloadlinhes_pkgbuild-adbcf19958300e9b6598990184c8815b945ba0ee.zip
linhes_pkgbuild-adbcf19958300e9b6598990184c8815b945ba0ee.tar.gz
linhes_pkgbuild-adbcf19958300e9b6598990184c8815b945ba0ee.tar.bz2
Removed old core and extra from repo. Renamed -testing to core/extra. This will setup the base for the testing branch.
Diffstat (limited to 'abs/core-testing/mdadm/mdadm.conf')
-rw-r--r--abs/core-testing/mdadm/mdadm.conf64
1 files changed, 0 insertions, 64 deletions
diff --git a/abs/core-testing/mdadm/mdadm.conf b/abs/core-testing/mdadm/mdadm.conf
deleted file mode 100644
index 0b2c712..0000000
--- a/abs/core-testing/mdadm/mdadm.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# mdadm configuration file
-#
-# mdadm will function properly without the use of a configuration file,
-# but this file is useful for keeping track of arrays and member disks.
-# In general, a mdadm.conf file is created, and updated, after arrays
-# are created. This is the opposite behavior of /etc/raidtab which is
-# created prior to array construction.
-#
-#
-# the config file takes two types of lines:
-#
-# DEVICE lines specify a list of devices of where to look for
-# potential member disks
-#
-# ARRAY lines specify information about how to identify arrays so
-# so that they can be activated
-#
-
-
-# You can have more than one device line and use wild cards. The first
-# example includes SCSI the first partition of SCSI disks /dev/sdb,
-# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second
-# line looks for array slices on IDE disks.
-#
-#DEVICE /dev/sd[bcdjkl]1
-#DEVICE /dev/hda1 /dev/hdb1
-#
-# The designation "partitions" will scan all partitions found in
-# /proc/partitions
-DEVICE partitions
-
-
-# ARRAY lines specify an array to assemble and a method of identification.
-# Arrays can currently be identified by using a UUID, superblock minor number,
-# or a listing of devices.
-#
-# super-minor is usually the minor number of the metadevice
-# UUID is the Universally Unique Identifier for the array
-# Each can be obtained using
-#
-# mdadm -D <md>
-#
-# To capture the UUIDs for all your RAID arrays to this file, run this:
-# # mdadm -D --scan >>/etc/mdadm.conf
-#
-#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
-#ARRAY /dev/md1 super-minor=1
-#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
-#
-# ARRAY lines can also specify a "spare-group" for each array. mdadm --monitor
-# will then move a spare between arrays in a spare-group if one array has a
-# failed drive but no spare
-#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
-#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
-#
-
-
-# When used in --follow (aka --monitor) mode, mdadm needs a
-# mail address and/or a program. To start mdadm's monitor mode, add
-# "mdadm" to your DAEMONS array in /etc/rc.conf
-#
-# If the lines are not found, mdadm will exit quietly
-#MAILADDR root@mydomain.tld
-#PROGRAM /usr/sbin/handle-mdadm-events