Removed old core and extra from repo. Renamed -testing to core/extra. This will setup the base for the testing branch.

1 files changed, 0 insertions, 352 deletions

diff --git a/abs/core-testing/ppp/options b/abs/core-testing/ppp/options
deleted file mode 100644
index 6369184..0000000
--- a/abs/core-testing/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-# 
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-#   egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link.  This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it.  0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map).  The characters to be escaped are
-# specified as a list of hex numbers separated by commas.  Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified.  The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines.  On Ultrix, this option implies hardware
-# flow control, as for the crtscts option.  (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128.  The default MRU value is 1500.  A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP.  With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation.  With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d).  If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form.  The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)).  (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes.  For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver.  The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection.  Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel.  /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present. 
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file.  Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer. 
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc.  When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received.  Note: it is not advisable to use this option with the persist
-# option without the demand option.  If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates.  This option only has any effect if the persist or demand
-# option is used.  The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer.  At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet.  The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---