diff options
author | Cecil Hugh Watson <knoppmyth@gmail.com> | 2009-01-07 09:44:40 (GMT) |
---|---|---|
committer | Cecil Hugh Watson <knoppmyth@gmail.com> | 2009-01-07 09:44:40 (GMT) |
commit | 22cb9c31cde8a125c3b7d159d8b50941cb5c7714 (patch) | |
tree | ffdf1f5463d1c6fcc968ef15a82837210fba0a39 /abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base | |
parent | f018045129450cc43d0e86eedcdd7b43d53ff691 (diff) | |
download | linhes_pkgbuild-22cb9c31cde8a125c3b7d159d8b50941cb5c7714.zip linhes_pkgbuild-22cb9c31cde8a125c3b7d159d8b50941cb5c7714.tar.gz linhes_pkgbuild-22cb9c31cde8a125c3b7d159d8b50941cb5c7714.tar.bz2 |
Updated kernel to 2.6.27. Updated latest PKGBUILD for various packages and recompiled.
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base')
-rw-r--r-- | abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base new file mode 100644 index 0000000..d37c18b --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base @@ -0,0 +1,90 @@ +* doc/config.debug +* +* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. +* -------------------------------------------------------------------- +* +* linux-wlan +* +* The contents of this file are subject to the Mozilla Public +* License Version 1.1 (the "License"); you may not use this file +* except in compliance with the License. You may obtain a copy of +* the License at http://www.mozilla.org/MPL/ +* +* Software distributed under the License is distributed on an "AS +* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +* implied. See the License for the specific language governing +* rights and limitations under the License. +* +* Alternatively, the contents of this file may be used under the +* terms of the GNU Public License version 2 (the "GPL"), in which +* case the provisions of the GPL are applicable instead of the +* above. If you wish to allow the use of your version of this file +* only under the terms of the GPL and not to allow others to use +* your version of this file under the MPL, indicate your decision +* by deleting the provisions above and replace them with the notice +* and other provisions required by the GPL. If you do not delete +* the provisions above, a recipient may use your version of this +* file under either the MPL or the GPL. +* +* -------------------------------------------------------------------- +* +* Inquiries regarding the linux-wlan Open Source project can be +* made directly to: +* +* AbsoluteValue Systems Inc. +* info@linux-wlan.com +* http://www.linux-wlan.com +* +* -------------------------------------------------------------------- +* +* Portions of the development of this software were funded by +* Intersil Corporation as part of PRISM(R) chipset product development. +* +* -------------------------------------------------------------------- + +The kernel components of linux-wlan currently have debugging code +that can be enabled via a "make config" option. If debug output +has been compiled into a driver, enable it by setting the value of the +module parameter xxx_debug +where xxx is the name of the component. There are five levels of +debugging (1-5). Here's a summary of the levels and their usage: + 1 - Enables most error messages for exception (but rare) conditions + 2 - Enables more exceptions + 3 - Enables MAC status output + 4 - More status + 5 - Function entry and exit + +The levels are additive. For example, level 3 includes level 3 +messages plus levels 1 and 2. + +To configure p80211.o for debug output, put the following line (with +your own level number) in your modutils configuration file (usually +/etc/conf.modules or /etc/modules.conf): + + options p80211 wlan_debug=2 + +To configure the prism2_cs driver for debug output, put the following +line (with your own level number) in your /etc/pcmcia/config.opts +file: + + module "prism2_cs" opts "prism2_debug=2" + +To configure the PCI, PLX, or USB driver for debug output, put the following +line (with your own level number) in your modutils configuration file (usually +/etc/conf.modules or /etc/modules.conf): + + options prism2_pci prism2_debug=3 + options prism2_plx prism2_debug=3 + options prism2_usb prism2_debug=3 + + +Then configure the collection and display of your kernel output. This +is usually done using syslog. Here are the relevant entries from the +/etc/syslog.conf file on one of our test machines: + +kern.* /var/log/kernel +kern.* /dev/tty9 +*.info;mail.none;news.none;authpriv.none /var/log/messages +*.info;mail.none;news.none;authpriv.none /dev/tty10 + + |