diff options
author | James Meyer <james.meyer@operamail.com> | 2009-01-12 19:19:50 (GMT) |
---|---|---|
committer | James Meyer <james.meyer@operamail.com> | 2009-01-12 19:19:50 (GMT) |
commit | 6c619a60fd89b5e75a93cff06977c552ddf1e621 (patch) | |
tree | 630ca50ea1c128c4be85ce920ecf034c561bf7fe /abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base | |
parent | 0b2b9b97e95f8f8bfda1d1fe09136d121cd0750d (diff) | |
parent | 634dff8fdd0a9c866c92f0020f282c23d1a438d8 (diff) | |
download | linhes_pkgbuild-6c619a60fd89b5e75a93cff06977c552ddf1e621.zip linhes_pkgbuild-6c619a60fd89b5e75a93cff06977c552ddf1e621.tar.gz linhes_pkgbuild-6c619a60fd89b5e75a93cff06977c552ddf1e621.tar.bz2 |
Merge branch 'HEAD' of ssh://jams@knoppmyth.net/mount/repository/LinHES-PKGBUILD.git
Conflicts:
abs/core-testing/LinHES-config/PKGBUILD
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base')
6 files changed, 741 insertions, 0 deletions
diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/Makefile.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/Makefile.svn-base new file mode 100644 index 0000000..9dfce56 --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/Makefile.svn-base @@ -0,0 +1,56 @@ +# doc/Makefile +# +# Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. +# -------------------------------------------------------------------- +# +# linux-wlan +# +# The contents of this file are subject to the Mozilla Public +# License Version 1.1 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS +# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +# implied. See the License for the specific language governing +# rights and limitations under the License. +# +# Alternatively, the contents of this file may be used under the +# terms of the GNU Public License version 2 (the "GPL"), in which +# case the provisions of the GPL are applicable instead of the +# above. If you wish to allow the use of your version of this file +# only under the terms of the GPL and not to allow others to use +# your version of this file under the MPL, indicate your decision +# by deleting the provisions above and replace them with the notice +# and other provisions required by the GPL. If you do not delete +# the provisions above, a recipient may use your version of this +# file under either the MPL or the GPL. +# +# -------------------------------------------------------------------- +# +# Inquiries regarding the linux-wlan Open Source project can be +# made directly to: +# +# AbsoluteValue Systems Inc. +# info@linux-wlan.com +# http://www.linux-wlan.com +# +# -------------------------------------------------------------------- +# +# Portions of the development of this software were funded by +# Intersil Corporation as part of PRISM(R) chipset product development. +# +# -------------------------------------------------------------------- + +-include ../config.mk + +all: + @echo "Nothing to do..." + +install: + @echo "Nothing to do..." + +clean: + rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags + for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done + diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/capturefrm.txt.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/capturefrm.txt.svn-base new file mode 100644 index 0000000..9ea908d --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/capturefrm.txt.svn-base @@ -0,0 +1,233 @@ +AVS Capture Frame Format +Version 2.1.1 + +1. Introduction +The original header format for "monitor mode" or capturing frames was +a considerable hack. The document covers a redesign of that format. + + Any questions, corrections, or proposed changes go to info@linux-wlan.com + +2. Frame Format +All sniff frames follow the same format: + + Offset Name Size Description + -------------------------------------------------------------------- + 0 CaptureHeader AVS capture metadata header + 64 802.11Header [10-30] 802.11 frame header + ?? 802.11Payload [0-2312] 802.11 frame payload + ?? 802.11FCS 4 802.11 frame check sequence + +Note that the header and payload are variable length and the payload +may be empty. + +If the hardware does not supply the FCS to the driver, then the frame shall +have a FCS of 0xFFFFFFFF. + +3. Byte Order +All multibyte fields of the capture header are in "network" byte +order. The "host to network" and "network to host" functions should +work just fine. All the remaining multibyte fields are ordered +according to their respective standards. + +4. Capture Header Format +The following fields make up the AVS capture header: + + Offset Name Type + ------------------------------ + 0 version uint32 + 4 length uint32 + 8 mactime uint64 + 16 hosttime uint64 + 24 phytype uint32 + 28 frequency uint32 + 32 datarate uint32 + 36 antenna uint32 + 40 priority uint32 + 44 ssi_type uint32 + 48 ssi_signal int32 + 52 ssi_noise int32 + 56 preamble uint32 + 60 encoding uint32 + 64 sequence uint32 + 68 drops uint32 + 72 receiver_addr uint8[6] + 78 padding uint8[2] + ------------------------------ + 80 + +The following subsections detail the fields of the capture header. + +4.1 version +The version field identifies this type of frame as a subtype of +ETH_P_802111_CAPTURE as received by an ARPHRD_IEEE80211_PRISM or +an ARPHRD_IEEE80211_CAPTURE device. The value of this field shall be +0x80211002. As new revisions of this header are necessary, we can +increment the version appropriately. + +4.2 length +The length field contains the length of the entire AVS capture header, +in bytes. + +4.3 mactime +Many WLAN devices supply a relatively high resolution frame reception +time value. This field contains the value supplied by the device. If +the device does not supply a receive time value, this field shall be +set to zero. The units for this field are microseconds. + +If possible, this time value should be absolute, representing the number +of microseconds elapsed since the UNIX epoch. + +4.4 hosttime +The hosttime field is set to the current value of the host maintained +clock variable when the frame is received by the host. + +If possible, this time value should be absolute, representing the number +of microseconds elapsed since the UNIX epoch. + +4.5 phytype +The phytype field identifies what type of PHY is employed by the WLAN +device used to capture this frame. The valid values are: + + PhyType Value + ------------------------------------- + phytype_fhss_dot11_97 1 + phytype_dsss_dot11_97 2 + phytype_irbaseband 3 + phytype_dsss_dot11_b 4 + phytype_pbcc_dot11_b 5 + phytype_ofdm_dot11_g 6 + phytype_pbcc_dot11_g 7 + phytype_ofdm_dot11_a 8 + phytype_dss_ofdm_dot11_g 9 + +4.6 frequency + +This represents the frequency or channel number of the receiver at the +time the frame was received. It is interpreted as follows: + +For frequency hopping radios, this field is broken in to the +following subfields: + + Byte Subfield + ------------------------ + Byte0 Hop Set + Byte1 Hop Pattern + Byte2 Hop Index + Byte3 reserved + +For non-hopping radios, the frequency is interpreted as follows: + + Value Meaning + ----------------------------------------- + < 256 Channel number (using externally-defined + channelization) + < 10000 Center frequency, in MHz + >= 10000 Center frequency, in KHz + +4.7 datarate +The data rate field contains the rate at which the frame was received +in units of 100kbps. + +4.8 antenna +For WLAN devices that indicate the receive antenna for each frame, the +antenna field shall contain an index value into the dot11AntennaList. +If the device does not indicate a receive antenna value, this field +shall be set to zero. + +4.9 priority +The priority field indicates the receive priority of the frame. The +value is in the range [0-15] with the value 0 reserved to indicate +contention period and the value 6 reserved to indicate contention free +period. + +4.10 ssi_type +The ssi_type field is used to indicate what type of signal strength +information is present: "None", "Normalized RSSI" or "dBm". "None" +indicates that the underlying WLAN device does not supply any signal +strength at all and the ssi_* values are unset. "Normalized RSSI" +values are integers in the range [0-1000] where higher numbers +indicate stronger signal. "dBm" values indicate an actual signal +strength measurement quantity and are usually in the range [-108 - 10]. +The following values indicate the three types: + + Value Description + --------------------------------------------- + 0 None + 1 Normalized RSSI + 2 dBm + 3 Raw RSSI + +4.11 ssi_signal +The ssi_signal field contains the signal strength value reported by +the WLAN device for this frame. Note that this is a signed quantity +and if the ssi_type value is "dBm" that the value may be negative. + +4.12 ssi_noise +The ssi_noise field contains the noise or "silence" value reported by +the WLAN device. This value is commonly defined to be the "signal +strength reported immediately prior to the baseband processor lock on +the frame preamble". If the hardware does not provide noise data, this +shall equal 0xffffffff. + +4.12 preamble +For PHYs that support variable preamble lengths, the preamble field +indicates the preamble type used for this frame. The values are: + + Value Description + --------------------------------------------- + 0 Undefined + 1 Short Preamble + 2 Long Preamble + +4.13 encoding +This specifies the encoding of the received packet. For PHYs that support +multiple encoding types, this will tell us which one was used. + + Value Description + --------------------------------------------- + 0 Unknown + 1 CCK + 2 PBCC + 3 OFDM + 4 DSSS-OFDM + 5 BPSK + 6 QPSK + 7 16QAM + 8 64QAM + +4.14 sequence +This is a receive frame sequence counter. The sniff host shall +increment this by one for every valid frame received off the medium. +By watching for gaps in the sequence numbers we can determine when +packets are lost due to unreliable transport, rather than a frame never +being received to begin with. + +4.15 drops +This is a counter of the number of known frame drops that occured. This +is particularly useful when the system or hardware cannot keep up with +the sniffer load. + +4.16 receiver_addr +This specifies the MAC address of the receiver of this frame. +It is six octets in length. This field is followed by two octets of +padding to keep the structure 32-bit word aligned. + +================================ + +Changes: v2->v2.1 + + * Added contact e-mail address to introduction + * Added sniffer_addr, drop count, and sequence fields, bringing total + length to 80 bytes + * Bumped version to 0x80211002 + * Mactime is specified in microseconds, not nanoseconds + * Added 64QAM, 16QAM, BPSK, QPSK encodings + +================================ + +Changes: v2.1->v2.1.1 + + * Renamed 'channel' to 'frequency' + * Clarified the interpretation of the frequency/channel field. + * Renamed 'sniffer address' to 'receiver address' + * Clarified timestamp fields. diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base new file mode 100644 index 0000000..d37c18b --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.debug.svn-base @@ -0,0 +1,90 @@ +* doc/config.debug +* +* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. +* -------------------------------------------------------------------- +* +* linux-wlan +* +* The contents of this file are subject to the Mozilla Public +* License Version 1.1 (the "License"); you may not use this file +* except in compliance with the License. You may obtain a copy of +* the License at http://www.mozilla.org/MPL/ +* +* Software distributed under the License is distributed on an "AS +* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +* implied. See the License for the specific language governing +* rights and limitations under the License. +* +* Alternatively, the contents of this file may be used under the +* terms of the GNU Public License version 2 (the "GPL"), in which +* case the provisions of the GPL are applicable instead of the +* above. If you wish to allow the use of your version of this file +* only under the terms of the GPL and not to allow others to use +* your version of this file under the MPL, indicate your decision +* by deleting the provisions above and replace them with the notice +* and other provisions required by the GPL. If you do not delete +* the provisions above, a recipient may use your version of this +* file under either the MPL or the GPL. +* +* -------------------------------------------------------------------- +* +* Inquiries regarding the linux-wlan Open Source project can be +* made directly to: +* +* AbsoluteValue Systems Inc. +* info@linux-wlan.com +* http://www.linux-wlan.com +* +* -------------------------------------------------------------------- +* +* Portions of the development of this software were funded by +* Intersil Corporation as part of PRISM(R) chipset product development. +* +* -------------------------------------------------------------------- + +The kernel components of linux-wlan currently have debugging code +that can be enabled via a "make config" option. If debug output +has been compiled into a driver, enable it by setting the value of the +module parameter xxx_debug +where xxx is the name of the component. There are five levels of +debugging (1-5). Here's a summary of the levels and their usage: + 1 - Enables most error messages for exception (but rare) conditions + 2 - Enables more exceptions + 3 - Enables MAC status output + 4 - More status + 5 - Function entry and exit + +The levels are additive. For example, level 3 includes level 3 +messages plus levels 1 and 2. + +To configure p80211.o for debug output, put the following line (with +your own level number) in your modutils configuration file (usually +/etc/conf.modules or /etc/modules.conf): + + options p80211 wlan_debug=2 + +To configure the prism2_cs driver for debug output, put the following +line (with your own level number) in your /etc/pcmcia/config.opts +file: + + module "prism2_cs" opts "prism2_debug=2" + +To configure the PCI, PLX, or USB driver for debug output, put the following +line (with your own level number) in your modutils configuration file (usually +/etc/conf.modules or /etc/modules.conf): + + options prism2_pci prism2_debug=3 + options prism2_plx prism2_debug=3 + options prism2_usb prism2_debug=3 + + +Then configure the collection and display of your kernel output. This +is usually done using syslog. Here are the relevant entries from the +/etc/syslog.conf file on one of our test machines: + +kern.* /var/log/kernel +kern.* /dev/tty9 +*.info;mail.none;news.none;authpriv.none /var/log/messages +*.info;mail.none;news.none;authpriv.none /dev/tty10 + + diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.linux-wlan-ng.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.linux-wlan-ng.svn-base new file mode 100644 index 0000000..c6ec9d8 --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/config.linux-wlan-ng.svn-base @@ -0,0 +1,264 @@ +* doc/config.linux-wlan-ng +* +* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. +* -------------------------------------------------------------------- +* +* linux-wlan +* +* The contents of this file are subject to the Mozilla Public +* License Version 1.1 (the "License"); you may not use this file +* except in compliance with the License. You may obtain a copy of +* the License at http://www.mozilla.org/MPL/ +* +* Software distributed under the License is distributed on an "AS +* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +* implied. See the License for the specific language governing +* rights and limitations under the License. +* +* Alternatively, the contents of this file may be used under the +* terms of the GNU Public License version 2 (the "GPL"), in which +* case the provisions of the GPL are applicable instead of the +* above. If you wish to allow the use of your version of this file +* only under the terms of the GPL and not to allow others to use +* your version of this file under the MPL, indicate your decision +* by deleting the provisions above and replace them with the notice +* and other provisions required by the GPL. If you do not delete +* the provisions above, a recipient may use your version of this +* file under either the MPL or the GPL. +* +* -------------------------------------------------------------------- +* +* Inquiries regarding the linux-wlan Open Source project can be +* made directly to: +* +* AbsoluteValue Systems Inc. +* info@linux-wlan.com +* http://www.linux-wlan.com +* +* -------------------------------------------------------------------- +* +* Portions of the development of this software were funded by +* Intersil Corporation as part of PRISM(R) chipset product development. +* +* -------------------------------------------------------------------- + +1. Summary + +This document describes a little more of the detail behind configuring the +linux-wlan system. + +2. Installed Componenents + +The linux-wlan-ng package consists of the following components: + + p80211.o Kernel module for 802.11 services + prism2sta_cs.o Kernel module for the Prism2 PCMCIA device + driver. + wlanctl-ng User-mode utility for sending commands to + 802.11 services and MAC-specific drivers. + wland User-mode daemon for receiving and handling + events from 802.11 services and MAC-specific + drivers (not used in this version). + /etc/pcmcia/wlan-ng* PCMCIA event and configuration scripts + + *prism2dl This utility is used for loading firmware + images into prism2 cards. DO NOT USE IT! + UNLESS YOU KNOW EXACTLY WHAT YOU ARE DOING. + This utility has the capability to damage a + card in a way that can only be repaired by the + manufacturer. + +When a 'make install' is performed, the modules are copied to the +/usr/lib/modules/<kernelver>/net and /usr/lib/modules/pcmcia directory, +the user-mode utilities are copied to /sbin, and the contents of +linux-wlan-ng/etc/pcmcia are copied to the /etc/pcmcia directory. If +necessary, the pcmcia config files are altered to include a reference to +the wlan-ng.conf file containing the information cardmgr uses to match +card CIS information to specific device drivers at card insertion time. + +NOTE: It is very important that you restart your pcmcia services after +installing linux-wlan-ng. cardmgr will not recognize the information +in the wlan-ng.conf file until after it has been restarted. + + +3. Configuration Variables + +To configure your installation for use, it will probably be necessary +to edit the /etc/pcmcia/wlan-ng.opts file. This file contains a +collection of variable assignments that are used by the wlan-ng script +to intialize your card at insertion time. The variables are broken +into groups: ENABLE, DOWNLOAD, USER MIB, WEP, STA, and AP START. + +Many of the choices involved in choosing configuration variable +settings are dependent on whether you are setting up your system as a +Station (STA) or an Access Point (AP). STA configuration is most +common. If you are using a mobile station that will connect to one or +more APs, STA configuration is all you will need. + +3.1 ENABLE Group +The only variable is this group is: + +WLAN_ENABLE=y + This variable determines whether the card will be intialized, + configured for operation, and your protocol stack configured. + Generally, you always want this set to 'y'. For some cards, + you will set this variable to 'n' when performing card + maintenance like firmware upgrades. + +3.2 DOWNLOAD Group + +The DOWNLOAD group contains variables that indicate if code or data +needs to be downloaded to the card prior to initialization and normal +operation. Currently, this is only required for the Prism2 card when +running in AP mode. + +WLAN_DOWNLOAD=n + Set this variable to 'y' if code or data must be downloaded + into the card prior to operation. + +WLAN_DOWNLOADER=/sbin/prism2dl + This variable contains the name of the program used to + download the code into the card. + +WLAN_DLIMAGE=/etc/wlan/apfw.hex + This variable contains the name of the file you wish to + download. + +3.3 USER MIB Group + +There is only one variable in this group, USER_MIBS. You may add your +own local MIB item assignments assignments to this variable. The +wlan-ng script will loop through the assignments found in this +variable and configure the card with each one prior to final +configuration and enable. + +3.4 WEP Group + +The variables in the WEP group are used to configure the 802.11 "Wired +Equivalent Privacy" element of the MAC if it is supported. The driver +is queried for WEP support prior to attempting WEP configuration. If +the driver states that WEP is NOT supported, these variables are +ignored. Note that you may need to set some of these variables even if +you are not using the privacy service. If shared-key authentication +is used, the WEP keys must be present. + +dot11PrivacyInvoked=false + Set this variable to "true" to enable the WEP support. + +lnxreq_hostWEPEncrypt=false +lnxreq_hostWEPDecrypt=false + Set these to true if you want WEP to be handled by the driver + instead of the hardware. The only downside of this is that it + takes a bit of CPU time and you lose the ability to handle + fragmentation. However, with prism2 cards, you should see a + performance boost, and with prism2.5 cards, this may avoid lockups. + +dot11WEPDefaultKeyID=1 + This variable identifies which of the WEP keys is the default + key used for all transmits from this station. In some + implementations, this can be changed (or rotated) later. + +dot11ExcludeUnencrypted=true + Setting this variable to "true" and dot11PrivacyInvoked to + true, has the effect of making WEP completely required for this + station (or AP). If set to "true", this STA will discard any + received frames that are not encrypted. + +PRIV_GENERATOR=/sbin/nwepgen + Some vendors include "WEP Key Generator" programs as part of + their windows or AP implementations. This is purely a + convenience to prevent you from having to type in 40 + hexadecimal digits. It does not contribute to the secrity of + your system at all. In some cases, we've included small + programs that generate keys in a manner compatible with the + vendor's method. If you wish to use this capability, include + the name of the generator program here. + +PRIV_GENSTR="12345" + Every generator implementation we've seen so far uses some + kind of 'passphrase' to generate the keys. This variable + contains the passphrase. To disable the use of a generator, + leave this variable empty. + +dot11WEPDefaultKey0 +dot11WEPDefaultKey1 +dot11WEPDefaultKey2 +dot11WEPDefaultKey3 + If you are configuring your keys by hand, you need to assign + these four variables. The format is "xx:xx:xx:xx:xx" and the + order of the keys in these variables IS IMPORTANT. Note: If + the PRIV_GENSTR variable is not empty, these variables are + ignored. + +3.5 STA Group + +Currently, there is only one variable in the STA group. This will +change over time. + +dot11DesiredSSID="WLAN_PRISM2" + This variable contains the SSID or "network name" of the + wireless network you wish to associate with. + +3.6 AP START Group + +If you have access to the necessary hardware and firmware, this driver +can be used to set up a Access Point. To configure for an access +point, set the IS_AP variable to 'y'. The following is a quick +summary of the other AP configuration variables: + + +APBRIDGEDEVICE=eth0 + Defines the ethernet device that will be the 'other' port for + bridging 802.11 frames. +APSSID="WLAN_PRISM2" + Defines the SSID that the AP will use when creating the network. +APBCNINT=100 + Defines the beacon interval (in Kus) that the AP will use. +APDTIMINT=3 + Defines the DTIM interval (in beacon intervals). + +APCFPOLLABLE|APCFPOLLREQ | Description +--------------------------- + false | false | No point coordination by this AP + false | true | AP will point coordinate for delivery only + true | false | AP will point coordinate for deliver and polling + true | true | Reserved + +APCFPPERIOD=3 + Defines how often the contention free period occurrs (in + beacons). + +APCFPMAXDURATION=100 + Defines the maximum length of the contention free period (in + Kus). + +APPROBEDELAY=100 + Not used for infrastructure networks, any value is valid. + +APCHANNEL=6 + Channel that the AP will create the network on. Range of valid + values depends on you regulatory domain. In the USA and Canada + the range is 1-11. In Japan the range is 1-14. + + +APBASICRATES="2 4" + A whitespace separated list of data rates in units of 500Kb/s. + The basic rate set is the set of rates that stations MUST + support to be allowed to join the network. + +APOPRATES="2 4 11 22" + A whitespace separated list of data rates in units of 500Kb/s. + The operational rate set is the set of rates that are allowed + in the network. It must be a superset of the basic rates + above. + +To complete the configuration of an Access Point, you will need to +make sure you have kernel bridging enable in your currently running +kernel and have the brcfg utility installed. One version of the brcfg +utility can be found at ftp://ftp.absoval.com + +To start the access point running, make sure the ethernet card is in the +system first. Then insert the WLAN card and everything should be +configured automatically by the /etc/pcmcia/wlan-ng script. + + diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/releasepolicy.txt.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/releasepolicy.txt.svn-base new file mode 100644 index 0000000..b66a571 --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/releasepolicy.txt.svn-base @@ -0,0 +1,37 @@ +linux-wlan Release Policy/Checklist +-------------------------------------------------- + +[MSM Note: Here's a _quick_ attempt at a release policy for linux-wlan. + It's very brief and relatively simple. I'm open to suggestions + for improvement. +] + +The following steps should be taken each time a new release of linux-wlan +is ready for distribution: + +0) Make sure the current code builds, loads, associates, and ftps + cleanly on all 3 AVS lab build boxes. +1) Assign an W.X.Y-preZ version number. +2) Update the version number in config.in. +3) Tag the files. +4) Build the tarball. (Bonehead! double check next time that the tarball + and config.in version number match, eh?) +5) Release to ftp. +6) Announce on linux-wlan-annouce as a feature frozen 'pre' release. +7) Announce on freshmeat (Pavel? ;-) +8) Allow at least 24 hours for bug reports and (hopefully) bugfix patches. +9a) After 24 hour period, if bugfix patches and/or local fixes to bug + reports are present, apply patches and GOTO step 0. +9b) If no show-stopper bug-reports and/or patches are received during the + 'pre' release period GOTO step 10. +10) Make sure the current code builds, loads, associates, and ftps + cleanly on all 3 AVS lab build boxes. +11) Assign an W.X.Y version number. +12) Update the version number in config.in. +13) Tag the files. +14) Build the tarball. (Bonehead! double check next time that the tarball + and config.in version number match, eh?) +15) Release to ftp. +16) Announce on linux-wlan-annouce as a final W.X.Y release. +17) Announce on freshmeat. + diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/rh71notes.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/rh71notes.svn-base new file mode 100644 index 0000000..399a2e4 --- /dev/null +++ b/abs/core-testing/wlan-ng26-utils/tmp/trunk/doc/.svn/text-base/rh71notes.svn-base @@ -0,0 +1,61 @@ +[MSM]: Here's an old e-mail. I'm not sure if it's in the list archives +so I figured I'd save it here. + +It may be useful for those using RH71. + +Date: Wed, 25 Apr 2001 16:03:20 +0800 +From: Leonard Ye <leonardye@yahoo.com> +Reply-To: linux-wlan-user@absoval.com +To: linux-wlan-user@absoval.com +Subject: [lwlan-user]: REDHAT 7.1 + wlan-ng 0.1.18 HOWTO + +Hi all, + +Just get the wlan-ng 0.1.18pre11 working on my redhat 7.1 and I would like +to share the experiences with you. + +Assumption: + a default installation of redhat 7.1 with +kernel-pcmcia-cs-3.1.24-2.rpm installed + +Four steps as followings: + +1) Get kernel source ready +install kernel-source-2.4.2-2 if you don't have the kernel source ready on +the machine +copy a suitable configuration file from the configs directory to .config +make dep + +2) Get pcmcia-cs header files ready +download the pcmcia-cs-3.1.24.tar.gz package +unzip it at appropriate place +make config + when you were asked what kind of kernel configuration you want to +use, select "1" +make all +DON'T "make install" + +3) compile the wlan-ng-0.1.18pre11 code +download the linux-wlan-ng-0.1.18pre11.tar.gz +unzip it at appropriate place +make config + select build-in kernel support +make all +make install + +4) some minor configuration +edit /etc/pcmcia/config.opts to comment out the card definition for +"Intersil PRISM2 11 .." +edit /etc/wlan-ng.opts + change string p2RoamingMode to p2CnfRoamingMode + set appropriate SSID for variable DesiredSSID +create an ifcfg-wlan0 file in /etc/sysconfig/network-scripts + +Ok, your machine should be able to work as a STA using +wlan-ng-0.1.18pre11. If you have experience with enabling AP mode, it +shouldn't be a problem for you enable it in redhat 7.1 + +Regards, +Leonard Ye + + |