udev:Bumped/Updated for LinHES 7.

15 files changed, 199 insertions, 1470 deletions

diff --git a/abs/core-testing/udev/81-arch.rules b/abs/core-testing/udev/81-arch.rules
index 933cbc4..40e0a7c 100644
--- a/abs/core-testing/udev/81-arch.rules
+++ b/abs/core-testing/udev/81-arch.rules
@@ -1,8 +1,6 @@
 # Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
 # do not edit this file, it will be overwritten on update
 #
-# This ruleset should provide a DevFS-compatible device tree.
-#
 # There are a number of modifiers that are allowed to be used in some
 # of the different fields. They provide the following subsitutions:
 #
@@ -36,10 +34,8 @@ SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
 
 #PNP addon modules
 SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP051[01]*", RUN+="/lib/udev/load-modules.sh irtty-sir"
 SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
 
 # PARPORT addon modules
 SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
@@ -56,16 +52,16 @@ LABEL="drivers_end"
 #####################################
 ###### CD/DVD symlinks - begin
 #####################################
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="sr[0-9]*", IMPORT="cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="scd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="scd[a-z]", IMPORT="cdrom_id --export $tempnode"
 ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
 ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
 ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
-ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvdrw-%b"
+ACTION=="add|change", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="cdsymlinks.sh"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
 ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="cdsymlinks.sh"
 ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="cdsymlinks.sh"
 ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="cdsymlinks.sh"
@@ -80,6 +76,9 @@ ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="cdsymlinks.sh"
 # fix /dev/root symlink
 SUBSYSTEM=="block", RUN+="root-link.sh"
 
+# permission for sg devices
+KERNEL=="sg[0-9]*", ATTRS{type}!="3|6", GROUP="disk", MODE="0660"
+
 # permissions for IDE CD devices
 SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
 
@@ -88,7 +87,7 @@ SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROU
 SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
 
 # permissions for removable devices like cardreaders or sticks
-KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
+KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="0", GROUP="storage"
 
 # permissions for firewire external drives
 KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
@@ -107,69 +106,38 @@ LABEL="pcmcia_end"
 # permissions for SCSI scanners
 SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
 
-# md block devices
-KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
+# mem
+KERNEL=="ram0", SYMLINK+="ramdisk"
+KERNEL=="ram1", SYMLINK+="ram"
+
+# video4linux
+
+KERNEL=="vbi0",		SYMLINK+="vbi"
+KERNEL=="radio0",	SYMLINK+="radio"
+KERNEL=="radio[0-9]*",	GROUP="video"
+KERNEL=="video0",	SYMLINK+="video"
+KERNEL=="vtx0",		SYMLINK+="vtx"
 
 # video devices
-SUBSYSTEM=="video4linux", GROUP="video"
 ### xorg resets those permissions, adjust your xorg.conf!
-KERNEL=="nvidia*",	GROUP="video"
 KERNEL=="3dfx*",	GROUP="video"
-
-# i2c devices
-KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
-
-# loop devices
-KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
+KERNEL=="fb[0-9]*",	GROUP="video"
 
 # misc
-KERNEL=="nvram",   NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
-KERNEL=="psaux",   NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="uinput",  NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="sgi_fetchop",   MODE="0666"
-KERNEL=="sonypi",        MODE="0666"
-KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
-
-# sound devices
-# alsa devices
-SUBSYSTEM=="sound",	GROUP="audio"
-# oss devices
-KERNEL=="audio*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dmmidi*",    NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="admmidi*",   NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dsp*",       NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="adsp*",      NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="midi*",      NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="amidi*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="mixer*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="sgi_fetchop",	MODE="0666"
+KERNEL=="sonypi",	MODE="0666"
 
 # USB devices
-KERNEL=="hiddev*",	NAME="usb/%k"
-KERNEL=="legousbtower*",	NAME="usb/%k", MODE="0666"
-KERNEL=="dabusb*",	NAME="usb/%k"
-
-# netlink devices
-KERNEL=="route",		NAME="netlink/%k"
-KERNEL=="skip",		NAME="netlink/%k"
-KERNEL=="usersock",	NAME="netlink/%k"
-KERNEL=="fwmonitor",	NAME="netlink/%k"
-KERNEL=="tcpdiag",	NAME="netlink/%k"
-KERNEL=="nflog",		NAME="netlink/%k"
-KERNEL=="xfrm",		NAME="netlink/%k"
-KERNEL=="arpd",		NAME="netlink/%k"
-KERNEL=="route6",	NAME="netlink/%k"
-KERNEL=="ip6_fw",	NAME="netlink/%k"
-KERNEL=="dnrtmsg",	NAME="netlink/%k"
-### ! disabled seems to break device creation !
-# KERNEL=="tap*",		NAME="netlink/%k"
+KERNEL=="legousbtower*", MODE="0666"
 
 # IEEE1394 (firewire) devices
-KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="raw1394",	GROUP="video"
 
 # kbd devices
-KERNEL=="kbd",		MODE="0664"
+KERNEL=="kbd", MODE="0664"
 
+# miscellaneous
+KERNEL=="rtc|rtc0", GROUP="audio", MODE="0664"
 #######################################
 # Permissions and Symlinks - end
 #######################################
diff --git a/abs/core-testing/udev/PKGBUILD b/abs/core-testing/udev/PKGBUILD
index c22b10b..2f71d28 100644
--- a/abs/core-testing/udev/PKGBUILD
+++ b/abs/core-testing/udev/PKGBUILD
@@ -1,96 +1,127 @@
-# $Id: PKGBUILD 22190 2008-12-22 18:25:11Z tpowa $
+# $Id: PKGBUILD 85315 2010-07-12 05:13:37Z tpowa $
 # Maintainer: Aaron Griffin <aaron@archlinux.org>
 # Maintainer: Tobias Powalowski <tpowa@archlinux.org>
 # Maintainer: Thomas Bächler <thomas@archlinux.org>
-pkgname=udev
-pkgver=135
-pkgrel=7
-pkgdesc="The userspace dev tools (udev)"
+
+pkgbase="udev"
+pkgname=('udev' 'udev-compat')
+pkgver=160
+pkgrel=1
 arch=(i686 x86_64)
 url="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
 license=('GPL')
 groups=('base')
-depends=('glibc' 'coreutils' 'util-linux')
-makedepends=('kernel26') #needed to build framebuffer blacklist
-install=udev.install
-backup=(etc/udev/udev.conf
-        etc/scsi_id.config
-        etc/udev/cdsymlinks.conf
-        etc/modprobe.d/framebuffer_blacklist)
-conflicts=('pcmcia-cs' 'hotplug')
-replaces=('devfsd')
 # older initscripts versions required start_udev
-conflicts=('initscripts<2008.02')
-options=(!makeflags)
+options=(!makeflags !libtool)
+makedepends=('glibc' 'coreutils' 'util-linux' 'libusb' 'glib2' 'kernel26' 'gperf' 'libxslt' 'gobject-introspection')
 source=(http://www.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.bz2
-        81-arch.rules load-modules.sh resolve-modalias.c cdsymlinks.sh root-link.sh
-        arch-udev-rules.patch readme-udev-arch.txt usb-storage.rules udev-ntfs-3g.patch mount-usb)
-md5sums=('661b9df34e1304dad10f595d95b472bb'
-         '3a955ca8e2122a48a223f9d8adf87b70'
-         'f4951f61438d69894b728212dac7318b'
-         'fca04a608009069beb786e26338a783b'
-         '8424b78e9dd772e75b4ef90814807815'
+        81-arch.rules load-modules.sh cdsymlinks.sh root-link.sh
+        arch-udev-rules.patch
+        logitech-rules.patch)
+md5sums=('65459a1f090082c0471bf4e5112208d7'
+         '6393ee81993f8b9beb776ca904005864'
+         'f91fddc67609b45b244a624977c4247b'
+         '2e808ee78d237c478b57af2a68d43769'
          '2d6dc6842464f107bccc68cd505a6c31'
-         'ae216c26a6a5cae4a3ef9c0e1f7bfaa6'
-         '7fc6d33bb218e752302eef0a80ff0a89'
-	 '11eaec41b77746f50975d4ef834c8f83')
+         '70198227b7bbe3852e1cd2299693af66'
+         '817537bdcfc1a4fa79e853fd38df4528')
 
 build() {
   cd $srcdir/$pkgname-$pkgver
-  patch -p1 < ../udev-ntfs-3g.patch || return 1
-  ./configure --prefix="" --mandir=/usr/share/man --includedir=/usr/include
-  make || return 1
-  make DESTDIR=$startdir/pkg install
-
+  # fix logitech rules
+  patch -Np0 -i $srcdir/logitech-rules.patch 
+  ./configure --prefix="" --mandir=/usr/share/man\
+                          --includedir=/usr/include\
+                          --libexecdir=/lib/udev\
+                          --datarootdir=/usr/share
+  make
+}
+  
+package_udev() {
+  pkgdesc="The userspace dev tools (udev)"
+  depends=('glibc' 'coreutils' 'util-linux' 'libusb' 'glib2'
+           'module-init-tools>=3.11')
+  install=udev.install
+  backup=(etc/udev/udev.conf
+          etc/modprobe.d/framebuffer_blacklist.conf)
+  conflicts=('pcmcia-cs' 'hotplug' 'initscripts<2009.07')
+  replaces=('devfsd')
+  
+  cd $srcdir/$pkgname-$pkgver
+  make DESTDIR=${pkgdir} install
   # Fix pkgconfig path
   install -d -m755 $pkgdir/usr/lib
   mv $pkgdir/lib/pkgconfig $pkgdir/usr/lib
-
-  # Non-stock rules still go in /etc
-  install -D -m644 $srcdir/81-arch.rules $pkgdir/etc/udev/rules.d/81-arch.rules
-  install -D -m644 $srcdir/usb-storage.rules $pkgdir/etc/udev/rules.d/usb-storage.rules
-
-  # Scripts needed
-  mkdir $pkgdir/etc/udev/scripts
-  install -D -m744 $srcdir/mount-usb $pkgdir/etc/udev/scripts
-
+  # Fix ConsoleKit path
+  mv $pkgdir/lib/ConsoleKit $pkgdir/usr/lib
+  # Install our rule for permissions and symlinks
+  install -D -m644 $srcdir/81-arch.rules $pkgdir/lib/udev/rules.d/81-arch.rules
   # install our module loading subsystem
   install -D -m755 $srcdir/load-modules.sh $pkgdir/lib/udev/load-modules.sh
-  install -d -m755 $pkgdir/bin
-  gcc -Wall $CFLAGS -o $pkgdir/bin/resolve-modalias $srcdir/resolve-modalias.c
   # install cdsymlinks.sh
   install -D -m755 $srcdir/cdsymlinks.sh $pkgdir/lib/udev/cdsymlinks.sh
   # install root-link.sh
   install -D -m755 $srcdir/root-link.sh $pkgdir/lib/udev/root-link.sh
-
-  # install instructions
-  # NOTE: We should delete this file
-  install -D -m644 $srcdir/readme-udev-arch.txt $pkgdir/usr/share/udev/readme-udev-arch.txt
-
-  # add devices dir
-  mkdir $pkgdir/lib/udev/devices
   # disable error logging to prevent startup failures printed to vc on boot
   sed -i -e 's|udev_log="err"|udev_log="0"|g' $pkgdir/etc/udev/udev.conf
-  # install additional rules files
-  for rule in $srcdir/$pkgname-$pkgver/rules/packages/*.rules; do
-      install -D -m 644 $rule $pkgdir/lib/udev/rules.d/
-  done
   # fix standard udev rules to fit to arch
   cd $pkgdir/lib/udev/rules.d/
-  patch -Np1 -i $srcdir/arch-udev-rules.patch || return 1
-
-  # remove the md-raid rules which are now provided by the mdadm package
-  rm -f $pkgdir/lib/udev/rules.d/64-md-raid.rules
-
+  patch -Np1 -i $srcdir/arch-udev-rules.patch
+  # remove .orig files
+  rm -f $pkgdir/lib/udev/rules.d/*.orig
   # disable persistent cdromsymlinks and network by default 
   # and move it to /etc/udev/rules.d
   mv $pkgdir/lib/udev/rules.d/75-persistent-net-generator.rules \
      $pkgdir/etc/udev/rules.d/75-persistent-net-generator.rules.optional
   mv $pkgdir/lib/udev/rules.d/75-cd-aliases-generator.rules \
      $pkgdir/etc/udev/rules.d/75-cd-aliases-generator.rules.optional
+
   # create framebuffer blacklist
   mkdir -p $pkgdir/etc/modprobe.d/
   for mod in $(find /lib/modules/*/kernel/drivers/video -name '*fb.ko' -exec basename {} .ko \;); do 
-	echo "blacklist $mod" >> $pkgdir/etc/modprobe.d/framebuffer_blacklist
+	echo "blacklist $mod" >> $pkgdir/etc/modprobe.d/framebuffer_blacklist.conf
   done
+
+  # create static devices in /lib/udev/devices/
+  mkdir ${pkgdir}/lib/udev/devices/pts
+  mkdir ${pkgdir}/lib/udev/devices/shm
+
+  mknod -m 0600 ${pkgdir}/lib/udev/devices/console c 5 1
+  mknod -m 0666 ${pkgdir}/lib/udev/devices/null c 1 3
+  mknod -m 0660 ${pkgdir}/lib/udev/devices/zero c 1 5
+  mknod -m 0666 ${pkgdir}/lib/udev/devices/kmsg c 1 11
+
+  ln -snf /proc/self/fd ${pkgdir}/lib/udev/devices/fd
+  ln -snf /proc/self/fd/0 ${pkgdir}/lib/udev/devices/stdin
+  ln -snf /proc/self/fd/1 ${pkgdir}/lib/udev/devices/stdout
+  ln -snf /proc/self/fd/2 ${pkgdir}/lib/udev/devices/stderr
+  ln -snf /proc/kcore ${pkgdir}/lib/udev/devices/core
+
+  # these static devices are created for convenience, to autoload the modules if necessary
+  # /dev/loop0
+  mknod -m 0660 ${pkgdir}/lib/udev/devices/loop0 b 7 0
+  chgrp disk ${pkgdir}/lib/udev/devices/loop0
+  # /dev/net/tun
+  mkdir ${pkgdir}/lib/udev/devices/net
+  mknod -m 0666 ${pkgdir}/lib/udev/devices/net/tun c 10 200
+  # /dev/fuse
+  mknod -m 0666 ${pkgdir}/lib/udev/devices/fuse c 10 229 
+  # /dev/ppp
+  mknod -m 0600 ${pkgdir}/lib/udev/devices/ppp c 108 0
+
+  # Replace dialout group in rules with uucp group
+  for i in $pkgdir/lib/udev/rules.d/*.rules; do
+    sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g' $i
+  done
+
+  mv "${pkgdir}/lib/girepository-1.0" "${pkgdir}/usr/lib/"
+}
+
+package_udev-compat() {
+  pkgdesc="The userspace dev tools (udev) - additional rules for older kernels"
+  depends=('udev')
+  groups=('')
+  cd $srcdir/$pkgname-$pkgver
+  install -d -m755 ${pkgdir}/lib/${pkgname}/rules.d
+  install -D -m644 ${srcdir}/${pkgname}-${pkgver}/rules/misc/30-kernel-compat.rules ${pkgdir}/lib/udev/rules.d/30-kernel-compat.rules
 }
diff --git a/abs/core-testing/udev/__changelog b/abs/core-testing/udev/__changelog
deleted file mode 100644
index 7e00323..0000000
--- a/abs/core-testing/udev/__changelog
+++ /dev/null
@@ -1 +0,0 @@
-Added usb-storage.rule and script to un/mount USB drives.
diff --git a/abs/core-testing/udev/arch-udev-rules.patch b/abs/core-testing/udev/arch-udev-rules.patch
index b672731..ce00c85 100644
--- a/abs/core-testing/udev/arch-udev-rules.patch
+++ b/abs/core-testing/udev/arch-udev-rules.patch
@@ -1,136 +1,50 @@
-diff -Nur rules.d/60-persistent-storage.rules rules.d.arch/60-persistent-storage.rules
---- rules.d/60-persistent-storage.rules	2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/60-persistent-storage.rules	2008-09-12 16:00:50.000000000 +0200
-@@ -10,7 +10,7 @@
- SUBSYSTEM!="block", GOTO="persistent_storage_end"
- 
- # skip rules for inappropriate block devices
--KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|dm-*|md*|btibm*", GOTO="persistent_storage_end"
-+KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*|btibm*", GOTO="persistent_storage_end"
- 
- # never access non-cdrom removable ide devices, the drivers are causing event loops on open()
- KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
+diff -Nur rules.d/50-udev-default.rules rules.d.arch/50-udev-default.rules
+--- rules.d/50-udev-default.rules	2009-03-07 22:22:48.200242883 +0100
++++ rules.d.arch/50-udev-default.rules	2009-03-07 22:23:26.134434516 +0100
+@@ -59,15 +59,15 @@
+ KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0640 -G floppy $root/%k"
+ 
+ # cdrom
+-SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n", GROUP="cdrom"
+-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
+-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
+-KERNEL=="pktcdvd", GROUP="cdrom"
++SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n", GROUP="optical", MODE="0660"
++SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="optical", MODE="0660"
++KERNEL=="pktcdvd[0-9]*", GROUP="optical", MODE="0660"
++KERNEL=="pktcdvd", GROUP="optical", MODE="0660"
+ 
+ # tape
+-KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="tape"
+-KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="tape"
+-SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
++KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="storage", MODE="0660"
++KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="storage", MODE="0660"
++SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="storage", MODE="0660"
+ 
+ # block-related
+ KERNEL=="sch[0-9]*", GROUP="disk"
 diff -Nur rules.d/80-drivers.rules rules.d.arch/80-drivers.rules
---- rules.d/80-drivers.rules	2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/80-drivers.rules	2008-09-12 16:01:56.000000000 +0200
-@@ -2,14 +2,16 @@
- 
- ACTION!="add", GOTO="drivers_end"
- 
--DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/sbin/modprobe $env{MODALIAS}"
--SUBSYSTEM=="tifm", RUN+="/sbin/modprobe --all tifm_sd tifm_ms"
--SUBSYSTEM=="memstick", RUN+="/sbin/modprobe --all ms_block mspro_block"
--SUBSYSTEM=="mmc", RUN+="/sbin/modprobe mmc_block"
--SUBSYSTEM=="i2o", RUN+="/sbin/modprobe i2o_block"
--SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/sbin/modprobe ide-scsi"
--SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe sg"
--SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/sbin/modprobe ppdev"
-+DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
-+SUBSYSTEM=="tifm", RUN+="/lib/udev/load-modules.sh tifm_sd"
-+SUBSYSTEM=="tifm", RUN+="/lib/udev/load-modules.sh tifm_ms"
+--- rules.d/80-drivers.rules	2010-06-03 11:55:08.978720002 +0200
++++ rules.d.arch/80-drivers.rules	2010-06-03 11:58:41.207865142 +0200
+@@ -2,12 +2,13 @@
+ 
+ ACTION=="remove", GOTO="drivers_end"
+ 
+-DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -bv $env{MODALIAS}"
+-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN+="/sbin/modprobe -bv tifm_sd"
+-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN+="/sbin/modprobe -bv tifm_ms"
+-SUBSYSTEM=="memstick", RUN+="/sbin/modprobe -bv --all ms_block mspro_block"
+-SUBSYSTEM=="i2o", RUN+="/sbin/modprobe -bv i2o_block"
+-SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
+-SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/sbin/modprobe -bv ppdev"
++DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/lib/udev/load-modules.sh  $env{MODALIAS}"
++SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN+="/lib/udev/load-modules.sh  tifm_sd"
++SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN+="/lib/udev/load-modules.sh  tifm_ms"
 +SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh ms_block"
 +SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh mspro_block"
-+SUBSYSTEM=="mmc", RUN+="/lib/udev/load-modules.sh mmc_block"
-+SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
-+SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/lib/udev/load-modules.sh ide-scsi"
++SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh  i2o_block"
 +SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
 +SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/lib/udev/load-modules.sh ppdev"
  
  LABEL="drivers_end"
- 
-diff -Nur rules.d/50-udev-default.rules rules.d.arch/50-udev-default.rules
---- rules.d/50-udev-default.rules	2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/50-udev-default.rules	2008-09-12 16:00:50.000000000 +0200
-@@ -4,12 +4,17 @@
- KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660", OPTIONS+="last_rule"
- KERNEL=="ptmx",			GROUP="tty", MODE="0666", OPTIONS+="last_rule"
- KERNEL=="tty",			GROUP="tty", MODE="0666", OPTIONS+="last_rule"
--KERNEL=="tty[0-9]*",		GROUP="tty", MODE="0620", OPTIONS+="last_rule"
--KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty", OPTIONS+="last_rule"
-+KERNEL=="tty[0-9]*",		GROUP="tty", MODE="0620", NAME="vc/%n", SYMLINK+="%k" OPTIONS+="last_rule"
-+KERNEL=="vcs",        GROUP="tty", NAME="vcc/0", OPTIONS+="last_rule"
-+KERNEL=="vcs[0-9]*",  GROUP="tty", NAME="vcc/%n", OPTIONS+="last_rule"
-+KERNEL=="vcsa",       GROUP="tty", NAME="vcc/a0", OPTIONS+="last_rule"
-+KERNEL=="vcsa[0-9]*", GROUP="tty", NAME="vcc/a%n", OPTIONS+="last_rule"
- KERNEL=="console",		MODE="0600", OPTIONS+="last_rule"
- 
- # serial
- KERNEL=="tty[A-Z]*|pppox*|ircomm*|noz*", GROUP="uucp"
-+KERNEL=="ttyS[0-9]*",   NAME="tts/%n", SYMLINK+="ttyS%n"
-+KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
- KERNEL=="ppp",			MODE="0600", OPTIONS+="ignore_remove"
- KERNEL=="mwave",		NAME="modems/mwave", GROUP="uucp"
- KERNEL=="hvc*|hvsi*",		GROUP="uucp"
-@@ -21,6 +26,7 @@
- KERNEL=="mem|kmem|port|nvram",	GROUP="kmem", MODE="0640"
- KERNEL=="ram0",			SYMLINK+="ramdisk"
- KERNEL=="ram1",			SYMLINK+="ram"
-+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
- 
- # input
- KERNEL=="mouse*|mice|event*",	NAME="input/%k", MODE="0640"
-@@ -36,13 +36,18 @@
- KERNEL=="vtx*|vbi*",		GROUP="video"
- KERNEL=="winradio*",		GROUP="video"
- KERNEL=="vbi0",			SYMLINK+="vbi"
--KERNEL=="radio0",		SYMLINK+="radio"
-+KERNEL=="vbi[0-9]*",   NAME="v4l/vbi%n", SYMLINK+="%k"
-+KERNEL=="radio0",		SYMLINK+="video"
-+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
- KERNEL=="video0",		SYMLINK+="video"
-+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k"
-+KERNEL=="vtx0", SYMLINK+="vtx"
-+KERNEL=="vtx[0-9]*",   NAME="v4l/vtx%n", SYMLINK+="%k"
- 
- # graphics
--KERNEL=="agpgart",		MODE="0600", GROUP="video"
--KERNEL=="card[0-9]*",		NAME="dri/%k", MODE="0666"
--KERNEL=="fb0",			SYMLINK+="fb"
-+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k", GROUP="video", MODE="0600"
-+KERNEL=="card[0-9]*",		NAME="dri/%k", GROUP="video", MODE="0666"
-+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
- KERNEL=="pmu",			GROUP="video"
- KERNEL=="nvidia*|nvidiactl*",	GROUP="video"
- SUBSYSTEM=="graphics",		GROUP="video"
-@@ -62,19 +73,19 @@
- # block, tapes, block-releated
- SUBSYSTEM=="block", GROUP="disk"
- SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n"
--KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions"
-+KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions", GROUP="floppy"
- KERNEL=="fd[0-9]",		GROUP="floppy"
--KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0640 -G floppy $root/%k"
-+KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k"
- KERNEL=="sch[0-9]*",		GROUP="disk"
--KERNEL=="sg[0-9]*",		ATTRS{type}!="3|6", GROUP="disk", MODE="0640"
-+KERNEL=="sg[0-9]*",		ATTRS{type}!="3|6", GROUP="disk", MODE="0660"
- KERNEL=="ht[0-9]*|nht[0-9]*",	GROUP="disk"
- KERNEL=="pg[0-9]*",		GROUP="disk"
- KERNEL=="pt[0-9]*|npt[0-9]*",	GROUP="disk"
- KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
- KERNEL=="rawctl",		NAME="raw/%k", GROUP="disk"
- SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
--KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/%k"
--KERNEL=="pktcdvd",		NAME="pktcdvd/control"
-+KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/%k", GROUP="optical", MODE="0660"
-+KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="optical", MODE="0660"
- KERNEL=="qft0",			SYMLINK+="ftape"
- SUBSYSTEM=="bsg",		NAME="bsg/%k"
- SUBSYSTEM=="aoe",		NAME="etherd/%k", GROUP="disk"
-@@ -83,13 +94,13 @@
- KERNEL=="tun",			NAME="net/%k", MODE="0666", OPTIONS+="ignore_remove"
- 
- # CPU
--KERNEL=="cpu[0-9]*",		NAME="cpu/%n/cpuid"
--KERNEL=="msr[0-9]*",		NAME="cpu/%n/msr"
-+KERNEL=="cpu[0-9]*",		NAME="cpu/%n/cpuid", SYMLINK="%k"
-+KERNEL=="msr[0-9]*",		NAME="cpu/%n/msr", SYMLINK="%k"
- KERNEL=="microcode",		NAME="cpu/microcode", MODE="0600"
- 
- # miscellaneous
- KERNEL=="fuse",			MODE="0666"
--KERNEL=="rtc|rtc0",		MODE="0644"
-+KERNEL=="rtc|rtc0",     NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
- KERNEL=="rtc0",			SYMLINK+="rtc"
- KERNEL=="auer[0-9]*",		NAME="usb/%k"
- KERNEL=="hw_random",		NAME="hwrng", SYMLINK+="%k"
diff --git a/abs/core-testing/udev/cdsymlinks.sh b/abs/core-testing/udev/cdsymlinks.sh
index c4185ac..498abda 100755
--- a/abs/core-testing/udev/cdsymlinks.sh
+++ b/abs/core-testing/udev/cdsymlinks.sh
@@ -1,11 +1,15 @@
 #! /bin/sh
 # Creates cdsymlinks in /dev
 # for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-if [ -d /dev/cd ]; then
+
+# check on cd/dvd drives and if persistant rules file is used
+if [ -d /dev/cd -a ! -e /etc/udev/rules.d/75-persistent-cd.rules ]; then
+	# remove existing device files
 	rm /dev/cdrom*
 	rm /dev/cdrw*
 	rm /dev/dvd*
 	rm /dev/dvdrw*
+	# start creating symlinks
 	for i in /dev/cd/cdrom-*; do
 		if [ -h $i ]; then
 		[ "$CD_NUMBER" = "" ] && ln -s $i /dev/cdrom
@@ -37,9 +41,4 @@ if [ -d /dev/cd ]; then
 		! [ "$DVDRW_NUMBER" = "" ] && DVDRW_NUMBER="$((DVDRW_NUMBER+1))" && ln -s $i /dev/dvdrw$DVDRW_NUMBER
 		fi
 	done
-else
-	rm /dev/cdrom*
-	rm /dev/cdrw*
-	rm /dev/dvd*
-	rm /dev/dvdrw*
 fi
diff --git a/abs/core-testing/udev/load-modules.sh b/abs/core-testing/udev/load-modules.sh
index a42d376..1e2af91 100755
--- a/abs/core-testing/udev/load-modules.sh
+++ b/abs/core-testing/udev/load-modules.sh
@@ -9,7 +9,7 @@
 BLACKLIST="${MOD_BLACKLIST[@]}"
 MODPROBE="/sbin/modprobe"
 LOGGER="/usr/bin/logger"
-RESOLVEALIAS="/bin/resolve-modalias"
+RESOLVEALIAS="${MODPROBE} --resolve-alias"
 USEBLACKLIST="--use-blacklist"
 
 if [ -f /proc/cmdline ]; then 
@@ -42,11 +42,11 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
     #sanitize the blacklist
     BLACKLIST="$(echo "$BLACKLIST" | sed -e 's|-|_|g')"
     # Try to find all modules for the alias
-    mods=$($RESOLVEALIAS /lib/modules/$(uname -r)/modules.alias $1)
+    mods=$($RESOLVEALIAS $1)
     # If no modules could be found, try if the alias name is a module name
     # In that case, omit the --use-blacklist parameter to imitate normal modprobe behaviour
     [ -z "${mods}" ] && $MODPROBE -qni $1 && mods="$1" && USEBLACKLIST=""
-    [ -z "${mods}" ] && $LOGGER -p info -t "$(basename $0)" "'$1' is not a valid module or alias name"
+    [ -z "${mods}" ] && $LOGGER -p local0.debug -t "$(basename $0)" "'$1' is not a valid module or alias name"
     for mod in ${mods}; do
       # Find the module and all its dependencies
       deps="$($MODPROBE -i --show-depends ${mod})"
@@ -61,9 +61,9 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
       for dep in $deps; do
         if echo "${BLACKLIST}" | /bin/grep -q -e " ${dep} " -e "^${dep} " -e " ${dep}\$"; then
           if [ "${dep}" = "${mod}" ]; then
-            $LOGGER -p info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because it is blacklisted"
+            $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because it is blacklisted"
           else
-            $LOGGER -p info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because its dependency '${dep}' is blacklisted"
+            $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because its dependency '${dep}' is blacklisted"
           fi
           continue 2
         fi
@@ -74,7 +74,7 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
       $MODPROBE $USEBLACKLIST ${mod}
     done
   else
-    $MODPROBE $1
+    $MODPROBE $USEBLACKLIST $1
   fi
 fi
 # vim: set et ts=4:
diff --git a/abs/core-testing/udev/logitech-rules.patch b/abs/core-testing/udev/logitech-rules.patch
new file mode 100644
index 0000000..fd0aea4
--- /dev/null
+++ b/abs/core-testing/udev/logitech-rules.patch
@@ -0,0 +1,14 @@
+--- -	2010-07-04 14:50:15.979139552 +0200
++++ extras/hid2hci/70-hid2hci.rules	2010-07-03 21:03:40.685341704 +0200
+@@ -11,9 +11,9 @@
+   RUN+="hid2hci --method=dell --devpath=%p", ENV{HID2HCI_SWITCH}="1"
+ 
+ # Logitech devices (hidraw)
+-KERNEL=="hiddev*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345bce]|c71[34bc]", \
++KERNEL=="hiddev*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345e]|c71[34]", \
+   RUN+="hid2hci --method=logitech-hid --devpath=%p"
+-KERNEL=="hidraw*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70a", \
++KERNEL=="hidraw*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[abc]|c71[bc]", \
+   RUN+="hid2hci --method=logitech-hid --devpath=%p"
+ 
+ ENV{DEVTYPE}!="usb_device", GOTO="hid2hci_end"
diff --git a/abs/core-testing/udev/mount-usb b/abs/core-testing/udev/mount-usb
deleted file mode 100644
index 2d3b3f5..0000000
--- a/abs/core-testing/udev/mount-usb
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-
-DIR=/media
-DEVICE=$2
-LABEL=`/lib/udev/vol_id -L /dev/$DEVICE`
-FS=`/lib/udev/vol_id -t /dev/$DEVICE`
-
-
-mount_device () {
-    if [ "$LABEL" == "" ];
-      then
-      mkdir -p $DIR/usb-$DEVICE
-      case $FS in 
-        vfat)    /bin/mount -t vfat -o rw,noauto,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 /dev/$DEVICE $DIR/usb-$DEVICE
-        ;; 
-        *)    /bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/$DEVICE $DIR/usb-$DEVICE
-        ;;
-      esac
-    else
-	mkdir -p $DIR/$LABEL
-      echo $LABEL >$DIR/.$DEVICE
-      case $FS in 
-        vfat)    /bin/mount -t vfat -o rw,noauto,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 /dev/$DEVICE $DIR/$LABEL
-        ;; 
-        *)    /bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/$DEVICE $DIR/$LABEL
-        ;;
-      esac
-    fi
-}
-
-umount_device () {
-    if [ -e $DIR/usb-$DEVICE ];
-      then
-      umount -l $DIR/usb-$DEVICE
-      rmdir $DIR/usb-$DEVICE;
-    else
-      ULABEL=`cat $DIR/.$DEVICE`
-      umount -l $DIR/$ULABEL
-      rmdir $DIR/$ULABEL
-      rm $DIR/.$DEVICE;
-	fi
-}
-
-case $1 in 
-  mount) mount_device
-  ;;
-  umount) umount_device
-  ;;
-  *) echo "Usage: mount-usb mount/umount sdxY"
-esac
diff --git a/abs/core-testing/udev/readme-udev-arch.txt b/abs/core-testing/udev/readme-udev-arch.txt
deleted file mode 100644
index e903a6b..0000000
--- a/abs/core-testing/udev/readme-udev-arch.txt
+++ /dev/null
@@ -1,266 +0,0 @@
-==========================
-Cold/Hotplugging with Udev
-==========================
-Version 1.1.6
-written by Tobias Powalowski <tpowa@archlinux.org>
-
----------------
-* Requirements:
----------------
-- recommended kernel >=2.6.18 for this udev to work properly.
-- No more DevFS device paths!  If you have them, update /etc/fstab:
-  /dev/discs/... etc. has been deprecated in favor of the old style:
-    /dev/discs/disc0/part1 -> /dev/hda1
-    /dev/discs/disc1/part2 -> /dev/hdb2
-- /etc/modprobe.conf should be cleaned from old install entries (see below).
-
----------------
-* Udev Changes:
----------------
-- The syntax of udev rules has been changed in >=098 release, please update your rules.
-  --- Snip Changelog Udev 098
-  Renaming of some key names:
-  BUS -> SUBSYSTEMS 
-  ID -> KERNELS
-  SYSFS -> ATTRS 
-  DRIVER -> DRIVERS
-  ATTR{file}="value" can be used now, to write to a sysfs file of the
-  event device. Instead of:
-    ..., SYSFS{type}=="0|7|14", RUN+="/bin/sh -c 'echo 60 > /sys$$DEVPATH/timeout'"
-  we now can do:
-    ..., ATTR{type}=="0|7|14", ATTR{timeout}="60"
-  All the PHYSDEV* keys are deprecated and will be removed from a
-  future kernel:
-    PHYDEVPATH -    is the path of a parent device and should not be
-                    needed at all.
-    PHYSDEVBUS -    is just a SUBSYSTEM value of a parent, and can be
-                    matched with SUBSYSTEMS==
-    PHYSDEVDRIVER - for bus devices it is available as ENV{DRIVER}.
-                    Newer kernels will have DRIVER in the environment,
-                    for older kernels udev puts in. Class device will
-                    no longer carry this property of a parent and
-                    DRIVERS== can be used to match such a parent value.
-  Note that ENV{DRIVER} is only available for a few bus devices, where
-  the driver is already bound at device event time. On coldplug, the
-  events for a lot devices are already bound to a driver, and they will have
-  that value set. But on hotplug, at the time the kernel creates the device,
-  it can't know what driver may claim the device after that, therefore
-  in most cases it will be empty.
-  --- snap Changelog Udev 098
-- optional udev >= 099 Persistent rules generator for network and cd/dvd devices was added.
-- default udev rules are installed to /lib/udev/rules.d/, they can be overriden by placing
-  own rules files to /etc/udev/rules.d/ .
-
----------------
-* How it works:
----------------
-- Udev replaces the functionality of hotplug and hwdetect scripts.
-- Udev does autoloading of modules and coldplugging.
-- Udev loads the modules simultaneously, which is much faster, 
-  but can cause some troubles with multiple network/sound/etc devices
-  (see below).
-- To reload your rules please use '/sbin/udevadm trigger'.
-
-======================
-* Autoloading modules:
-======================
-
--------------------------------------------------------------------------
-* Module autoloading is controlled by MOD_AUTOLOAD="" in /etc/rc.conf
--------------------------------------------------------------------------
-MOD_AUTOLOAD="yes" in /etc/rc.conf is necessary: 
-- if you want module autodetection
-- if you want modules be loaded by udev (hotplugging and coldplugging)
-
-MOD_AUTOLOAD="no" is necessary:
-- if you want to load modules strictly using 'modprobe <module>'
-- if you want to load only the modules listed in the MODULES=() array
-  in /etc/rc.conf
-
----------------
-* Blacklisting:
----------------
-- means udev will never try to load the module, even if MOD_AUTOLOAD="yes"
-  is set.
-
-You can do this in 2 ways:
-- MOD_BLACKLIST=(moduleA moduleB)
-- MODULES=(!moduleA !moduleB)
-
-Both entries mean the same thing to udev.  MOD_BLACKLIST was used by hwdetect.
-hwdetect does not understand the MODULES= syntax, but it doesn't have to -- it
-is only used in mkinitrd now.
-
-==================================
-* Boot parameter: load_modules=off
-==================================
-
-- No modules are loaded during boot using udev autoloading or the MODULES array
-- Useful for repairing your system if something goes wrong during udev startup
-  and/or during loading modules
-
-==================================
-* Boot parameter: disablemodules=
-==================================
-
-- list modules there that shouldn't be loaded by udev
-- Syntax: disablemodules=module1,module2,module3,...
-- Useful for repairing your system if something goes wrong during udev startup
-  and/or during loading modules and you know the module that causes the trouble.
-
-========================================
-* Persistent CD/DVD symlinks (optional):
-========================================
-
-- To enable this feature copy in /etc/udev/rules.d
-  75-cd-aliases-generator.rules.optinal
-  to 75-cd-aliases-generator.rules
-  Also disable this part in /lib/udev/rules.d/81-arch.rules by putting a # in front:
-  --- snip
-  ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
-  ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-  ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
-  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
-  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
---- snap
-
-- To get the same device name for CD/DVD symlinks each time you boot,
-  a rule will be generated during bootup or by executing '/sbin/udevadm trigger'.
-- Examples: dvd, cdrom ,cdrw etc.
-- If you want to change those links,
-  modify '/etc/udev/rules.d/70-peristent-cd.rules' to your needs.
-
-Known issues:
-The symlink name is then bound to the hardware pci adress, 
-if you change your CD/DVD device, you have to check the
-/etc/udev/rules.d/70-peristent-net.rules file for correctness.
-
-======================================
-* Persistent Network names (optional):
-======================================
-
-- To enable this feature copy in /etc/udev/rules.d
-  75-persistent-net-generator.rules.optional
-  to 75-persistent-net-generator.rules
-- To get the same network device name each time you boot,
-  a rule will be generated during bootup or by executing '/sbin/udevadm trigger'.
-- Examples: eth0, eth1, wlan0 etc.
-- If you want to change those names, 
-  modify '/etc/udev/rules.d/70-peristent-net.rules' to your needs.
-- NAME= determines the name of your network card. Use these names in your
-  network configuration in rc.conf as well.
-
-Known issues:
-The interface name is then bound to the hardware mac adress, 
-if you change your network card, you have to check the
-/etc/udev/rules.d/70-peristent-net.rules file for correctness.
-
-====================================
-* Known Problems Hardware:
-====================================
-
-- BusLogic devices are broken and will cause a freeze during startup
-Solution:
-This is a kernel bug and no fix has been provided yet.
-
-- PCMCIA Card readers are not treated as removabel devices.
-Solution:
-To get access to them with hal's pmount backend add them to /etc/pmount.allow
-
-====================================
-* Known Problems MOD_AUTOLOAD="yes":
-====================================
-
------------------------------------------------------------------------------
-* Sound is not working or modules (eg. parport) are not loaded automatically:
------------------------------------------------------------------------------
-Solution:
-- Do you have a clean /etc/modprobe.conf?
-  - A clean /etc/modprobe.conf is empty.  The stock modprobe.conf file
-    contains nothing
-- alsaconf can write output to modprobe.conf. Please keep that in mind.
-
----------------------------------------------
-* Devices get mixed up eg. Network/Soundcards
----------------------------------------------
-- Because udev loads all the modules at once, sometimes devices are initialized
-  in different orders (eg. network cards switch eth0 and eth1, sound cards
-  the same)
-
-Solution:
-- Load them in MODULES=() array in the order you need them
-- eg: MODULES=(moduleA moduleB)
-
-Second solution for network:
-- The "proper" way to configure net interfaces to hold static names within
-  udev rules.  Add lines like these to a custom rules file such as
-  /etc/udev/rules.d/01-network.rules:
-    SUBSYSTEM=="net", SYSFS{address}=="aa:bb:cc:dd:ee:ff", NAME="lan0"
-    SUBSYSTEM=="net", SYSFS{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"
-
-- To get the right mac address use this command:
-    udevinfo -a -p /sys/class/net/<yourdevice>
-- Make sure you use lower-case hex values in your udev rules.
-- NAME= determines the name of your network card.  Use these names in your
-  network configuration in rc.conf as well.
-
-Third solution for network:
-- check Persistent Network part
-
------------------------------------
-* Network 8139too & 8139cp problem:
------------------------------------
-- Both modules have the same kernel entry, which can cause problems.
-Solution:
-- Enter the one you need in MODULES=() and blacklist the other one
-- eg: MODULES=(!8139cp 8139too)
-- The example tells udev to ignore 8139cp module and load 8139too afterwards.
-
---------------------------------------------------------
-* You need a special loading order to get devices going:
---------------------------------------------------------
-- Kernel loads modules in wrong order.
-Solution:
-- Load them in the correct order in MODULES=()
-
------------------------------
-* Module is not autodetected:
------------------------------
-- If your device does not provide a modalias in /sys it cannot be autodetected.
-- If modalias is not combined to a kernel module it cannot be autodetected.
-Known modules that are not autodetected:
-- SCSI CONTROLLER:
-  scsi_transport_sas ultrastor qlogicfas eata BusLogic pas16 wd7000 sym53c416
-  g_NCR5380_mmio fdomain u14-34f dtc initio in2000 imm t128 aha1542 aha152x
-  atp870u g_NCR5380 NCR53c406a qlogicfas408 megaraid_mm advansys
-- NETWORK CARDS:
-  hp ne de4x5 wd cs89x0 eepro smc9194 seeq8005 ni52 ni65 ac3200 smc-ultra 
-  at1700 hp-plus depca eexpress 82596 de600 eth16i de620 lance ewrk3 e2100
-  lp486e 3c501 3c503 3c505 3c507 3c509 3c515 myri10ge
-Solution:
-- Enter the one you need in MODULES=()
-
-=======================================
-* Known Problems with MOD_AUTOLOAD="no"
-=======================================
-
------------------------------------------------------------------
-* Modules are not loaded anymore during coldplug or hotplug event
------------------------------------------------------------------
-- Udev is usually responsible for this, but the MOD_AUTOLOAD switch will
-  now disable it.  If you want automatic hot/cold-plugging, turn on
-  MOD_AUTOLOAD.  Otherwise you will have to load all your modules manually,
-  either with /sbin/modprobe or entries in the MODULES=() array.
-Solution: 
-- For bootup (coldplug) enter this in rc.conf: MODULES=(moduleA moduleB)  
-- After bootup (hotplug) use this: modprobe <moduleA>
-
-=========================================
-* Known problems for custom kernel users:
-=========================================
-
-----------------------------
-* Udev doesn't start at all:
-----------------------------
-- Check Requirements list
diff --git a/abs/core-testing/udev/resolve-modalias.c b/abs/core-testing/udev/resolve-modalias.c
deleted file mode 100644
index d1680b1..0000000
--- a/abs/core-testing/udev/resolve-modalias.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <stdio.h>
-#include <fnmatch.h>
-#include <string.h>
-#include <malloc.h>
-
-static char *getline(FILE *file) {
-  static size_t size = 1024;
-  static char *buf = NULL;
-  static unsigned int i = 0, r = 0;;
-
-  if(buf == NULL)
-    buf = (char*)malloc(size);
-
-  if(i) {
-    memmove(buf, buf+i, size-i);
-    r -= i;
-    i = 0;
-  }
-
-  while(1) {
-    if(i == size) {
-      size *= 2;
-      buf = (char*)realloc(buf, size);
-    }
-
-    if(i==r)
-      r += fread(buf+i, 1, size-i, file);
-
-    if(i==r && i == 0) {
-      free(buf);
-      buf = NULL;
-      r = 0;
-      return NULL;
-    }
-
-    if(i==r || buf[i] == '\n') {
-      buf[i++] = '\0';
-      return buf;
-    }
-    i++;
-  }
-}
-
-int main(int argc, char *argv[]) {
-  FILE *f=fopen(argv[1], "r");
-  char *line, *pattern, *module;
-  char *pos1, *pos2;
-
-  while((line=getline(f))!=NULL) {
-    if(!strncmp(line, "alias", strlen("alias"))) {
-      pos1 = index(line, ' ');
-      pos2 = index(pos1+1, ' ');
-      pattern = pos1+1;
-      *pos2 = '\0';
-      module = pos2+1;
-
-      if(!fnmatch(pattern, argv[2], 0))
-        printf("%s\n", module);
-    }
-  }
-  return 0;
-}
diff --git a/abs/core-testing/udev/start_udev b/abs/core-testing/udev/start_udev
deleted file mode 100755
index 03c38fd..0000000
--- a/abs/core-testing/udev/start_udev
+++ /dev/null
@@ -1,137 +0,0 @@
-#! /bin/sh
-#
-# start_udev
-# script to initialize /dev by using udev.
-#
-# Modified for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-#
-# Inspired by:
-# 
-# Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
-#
-# Released under the GPL v2 only.
-#
-# This needs to be run at the earliest possible point in the boot 
-# process.
-#
-# Based on the udev init.d script
-#
-# Thanks go out to the Gentoo developers for proving 
-# that this is possible to do.
-#
-# Yes, it's very verbose, feel free to turn off all of the echo calls,
-# they were there to make me feel better that everything was working
-# properly during development...
-#
-
-prog=udev
-sysfs_dir=/sys
-bin=/sbin/udev
-udevd=/sbin/udevd
-udev_root="/dev"
-
-starttime=$(date +%s)
-
-
-function trigger_builtin_events() {   
-           list="$(echo /sys/class/tty/ttyS*/uevent)"   
-           for i in $list; do   
-               case "$i" in   
-                   */class/uevent|*\**)   
-                       continue   
-                       ;;   
-                   */class/tty/ttyS*)   
-                       echo "add" > "$i"   
-                       ;;   
-               esac   
-           done   
-   }
-
-function trigger_device_events() {
-	/sbin/udevtrigger
-}
-
-function wait_for_queue() {
-#	loop=20
-#        while ! [ "$loop" -gt 0 -a -d /dev/.udev/queue ]; do
-#                   sleep 0.1;
-#                   loop=$(($loop - 1))
-#        done
-	/sbin/udevsettle
-}
-
-make_extra_nodes () {
-	# there are a few things that sysfs does not export for us.
-	# these things go here (and remember to remove them in 
-	# remove_extra_nodes()
-	#
-	# Thanks to Gentoo for the initial list of these.
-	ln -snf /proc/self/fd $udev_root/fd
-	ln -snf /proc/self/fd/0 $udev_root/stdin
-	ln -snf /proc/self/fd/1 $udev_root/stdout
-	ln -snf /proc/self/fd/2 $udev_root/stderr
-	ln -snf /proc/kcore $udev_root/core
-
-	mkdir $udev_root/pts
-	mkdir $udev_root/shm
-}
-
-udev_init  () {
-# don't use udev if sysfs is not mounted.
-if [ ! -d $sysfs_dir/block ]; then
-	exit 1
-fi
-
-echo "mounting... ramfs at $udev_root"
-mount -n -t ramfs none $udev_root
-
-# propogate /udev from /sys
-echo "Creating initial udev device nodes:"
-
-#echo "making extra nodes"
-make_extra_nodes
-
-# check if udevd is already running
-if [ `pidof -o %PPID /sbin/udevd` ]; then
-	grep -v "/dev/shm" /etc/mtab | grep -v "/dev/pts" > /etc/mtab
-	mount /dev/pts
-	mount /dev/shm
-else
-	echo "start udev daemon"
-	/sbin/udevd --daemon
-fi
-case "$(uname -r)" in
-       2.6.[0-9]|2.6.[0-9][!0-9]*) ;;
-       *) 	if [ -f "/sys/class/tty/console/uevent" ]; then
-			echo "Kernel >= 2.6.15 and supports uevents"
-			# trigger the sorted events
-			echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
-			# catch events that are real fast
-			mkdir -p /dev/.udev/queue
-			trigger_builtin_events
-		else
-			# for older kernels without uevents will be removed when udevstart dies in udev
-			echo "Kernel does not support uevents, you need a kernel >= 2.6.15!"
-			exit 1
-		fi 
-	;;
-esac
-}
-
-udev_uevents () {
-# configure all devices
-trigger_device_events
-# until we know how to do better, just wait for _all_ events to finish
-wait_for_queue
-}
-
-if [ $# -eq 0 ]; then
-udev_init
-udev_uevents
-fi
-
-[ "$1" = "init" ] && udev_init
-[ "$1" = "uevents" ] && udev_uevents
-
-echo "udev startup is finished! - time = $(( `date +%s` - $starttime ))"
-exit 0
diff --git a/abs/core-testing/udev/udev-ntfs-3g.patch b/abs/core-testing/udev/udev-ntfs-3g.patch
deleted file mode 100644
index 366c41f..0000000
--- a/abs/core-testing/udev/udev-ntfs-3g.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-diff -ruaN udev-135.orig/extras/volume_id/lib/ntfs.c udev-135/extras/volume_id/lib/ntfs.c
---- udev-135.orig/extras/volume_id/lib/ntfs.c	2008-11-13 20:42:56.000000000 +0000
-+++ udev-135/extras/volume_id/lib/ntfs.c	2009-06-28 23:31:01.000000000 +0000
-@@ -194,7 +194,7 @@
- 	}
- 
- 	volume_id_set_usage(id, VOLUME_ID_FILESYSTEM);
--	id->type = "ntfs";
-+	id->type = "ntfs-3g";
- 	/* we think this is ntfs, but we make sure no other signatures are found */
- 	id->force_unique_result = 1;
- 	return 0;
-diff -ruaN udev-135.orig/extras/volume_id/lib/ntfs.c~ udev-135/extras/volume_id/lib/ntfs.c~
---- udev-135.orig/extras/volume_id/lib/ntfs.c~	1970-01-01 00:00:00.000000000 +0000
-+++ udev-135/extras/volume_id/lib/ntfs.c~	2008-11-13 20:42:56.000000000 +0000
-@@ -0,0 +1,201 @@
-+/*
-+ * volume_id - reads filesystem label and uuid
-+ *
-+ * Copyright (C) 2004 Kay Sievers <kay.sievers@vrfy.org>
-+ *
-+ * This program is free software: you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation, either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _GNU_SOURCE
-+#define _GNU_SOURCE 1
-+#endif
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <string.h>
-+#include <errno.h>
-+#include <ctype.h>
-+
-+#include "libvolume_id.h"
-+#include "libvolume_id-private.h"
-+
-+static struct ntfs_super_block {
-+	uint8_t		jump[3];
-+	uint8_t		oem_id[8];
-+	uint16_t	bytes_per_sector;
-+	uint8_t		sectors_per_cluster;
-+	uint16_t	reserved_sectors;
-+	uint8_t		fats;
-+	uint16_t	root_entries;
-+	uint16_t	sectors;
-+	uint8_t		media_type;
-+	uint16_t	sectors_per_fat;
-+	uint16_t	sectors_per_track;
-+	uint16_t	heads;
-+	uint32_t	hidden_sectors;
-+	uint32_t	large_sectors;
-+	uint16_t	unused[2];
-+	uint64_t	number_of_sectors;
-+	uint64_t	mft_cluster_location;
-+	uint64_t	mft_mirror_cluster_location;
-+	int8_t		cluster_per_mft_record;
-+	uint8_t		reserved1[3];
-+	int8_t		cluster_per_index_record;
-+	uint8_t		reserved2[3];
-+	uint8_t		volume_serial[8];
-+	uint16_t	checksum;
-+} PACKED *ns;
-+
-+static struct master_file_table_record {
-+	uint8_t		magic[4];
-+	uint16_t	usa_ofs;
-+	uint16_t	usa_count;
-+	uint64_t	lsn;
-+	uint16_t	sequence_number;
-+	uint16_t	link_count;
-+	uint16_t	attrs_offset;
-+	uint16_t	flags;
-+	uint32_t	bytes_in_use;
-+	uint32_t	bytes_allocated;
-+} PACKED *mftr;
-+
-+static struct file_attribute {
-+	uint32_t	type;
-+	uint32_t	len;
-+	uint8_t		non_resident;
-+	uint8_t		name_len;
-+	uint16_t	name_offset;
-+	uint16_t	flags;
-+	uint16_t	instance;
-+	uint32_t	value_len;
-+	uint16_t	value_offset;
-+} PACKED *attr;
-+
-+static struct volume_info {
-+	uint64_t	reserved;
-+	uint8_t		major_ver;
-+	uint8_t		minor_ver;
-+} PACKED *info;
-+
-+#define MFT_RECORD_VOLUME			3
-+#define MFT_RECORD_ATTR_VOLUME_NAME		0x60
-+#define MFT_RECORD_ATTR_VOLUME_INFO		0x70
-+#define MFT_RECORD_ATTR_OBJECT_ID		0x40
-+#define MFT_RECORD_ATTR_END			0xffffffffu
-+
-+int volume_id_probe_ntfs(struct volume_id *id, uint64_t off, uint64_t size)
-+{
-+	unsigned int sector_size;
-+	unsigned int cluster_size;
-+	uint64_t mft_cluster;
-+	uint64_t mft_off;
-+	unsigned int mft_record_size;
-+	unsigned int attr_type;
-+	unsigned int attr_off;
-+	unsigned int attr_len;
-+	unsigned int val_off;
-+	unsigned int val_len;
-+	const uint8_t *buf;
-+	const uint8_t *val;
-+
-+	info("probing at offset 0x%" PRIx64 "\n", off);
-+
-+	ns = (struct ntfs_super_block *) volume_id_get_buffer(id, off, 0x200);
-+	if (ns == NULL)
-+		return -1;
-+
-+	if (memcmp(ns->oem_id, "NTFS", 4) != 0)
-+		return -1;
-+
-+	volume_id_set_uuid(id, ns->volume_serial, 0, UUID_64BIT_LE);
-+
-+	sector_size = le16_to_cpu(ns->bytes_per_sector);
-+	if (sector_size < 0x200)
-+		return -1;
-+
-+	cluster_size = ns->sectors_per_cluster * sector_size;
-+	mft_cluster = le64_to_cpu(ns->mft_cluster_location);
-+	mft_off = mft_cluster * cluster_size;
-+
-+	if (ns->cluster_per_mft_record < 0)
-+		/* size = -log2(mft_record_size); normally 1024 Bytes */
-+		mft_record_size = 1 << -ns->cluster_per_mft_record;
-+	else
-+		mft_record_size = ns->cluster_per_mft_record * cluster_size;
-+
-+	dbg("sectorsize  0x%x\n", sector_size);
-+	dbg("clustersize 0x%x\n", cluster_size);
-+	dbg("mftcluster  %" PRIu64 "\n", mft_cluster);
-+	dbg("mftoffset  0x%" PRIx64 "\n", mft_off);
-+	dbg("cluster per mft_record  %i\n", ns->cluster_per_mft_record);
-+	dbg("mft record size  %i\n", mft_record_size);
-+
-+	buf = volume_id_get_buffer(id, off + mft_off + (MFT_RECORD_VOLUME * mft_record_size),
-+			 mft_record_size);
-+	if (buf == NULL)
-+		return -1;
-+
-+	mftr = (struct master_file_table_record*) buf;
-+	dbg("mftr->magic '%c%c%c%c'\n", mftr->magic[0], mftr->magic[1], mftr->magic[2], mftr->magic[3]);
-+	if (memcmp(mftr->magic, "FILE", 4) != 0)
-+		return -1;
-+
-+	attr_off = le16_to_cpu(mftr->attrs_offset);
-+	dbg("file $Volume's attributes are at offset %i\n", attr_off);
-+
-+	while (1) {
-+		attr = (struct file_attribute*) &buf[attr_off];
-+		attr_type = le32_to_cpu(attr->type);
-+		attr_len = le16_to_cpu(attr->len);
-+		val_off = le16_to_cpu(attr->value_offset);
-+		val_len = le32_to_cpu(attr->value_len);
-+		attr_off += attr_len;
-+
-+		if (attr_len == 0)
-+			break;
-+
-+		if (attr_off >= mft_record_size)
-+			break;
-+
-+		if (attr_type == MFT_RECORD_ATTR_END)
-+			break;
-+
-+		dbg("found attribute type 0x%x, len %i, at offset %i\n",
-+		    attr_type, attr_len, attr_off);
-+
-+		if (attr_type == MFT_RECORD_ATTR_VOLUME_INFO) {
-+			dbg("found info, len %i\n", val_len);
-+			info = (struct volume_info*) (((uint8_t *) attr) + val_off);
-+			snprintf(id->type_version, sizeof(id->type_version)-1,
-+				 "%u.%u", info->major_ver, info->minor_ver);
-+		}
-+
-+		if (attr_type == MFT_RECORD_ATTR_VOLUME_NAME) {
-+			dbg("found label, len %i\n", val_len);
-+			if (val_len > VOLUME_ID_LABEL_SIZE)
-+				val_len = VOLUME_ID_LABEL_SIZE;
-+
-+			val = ((uint8_t *) attr) + val_off;
-+			volume_id_set_label_raw(id, val, val_len);
-+			volume_id_set_label_unicode16(id, val, LE, val_len);
-+		}
-+	}
-+
-+	volume_id_set_usage(id, VOLUME_ID_FILESYSTEM);
-+	id->type = "ntfs";
-+	/* we think this is ntfs, but we make sure no other signatures are found */
-+	id->force_unique_result = 1;
-+	return 0;
-+}
diff --git a/abs/core-testing/udev/udev.install b/abs/core-testing/udev/udev.install
index bb8b166..b4ce3c8 100644
--- a/abs/core-testing/udev/udev.install
+++ b/abs/core-testing/udev/udev.install
@@ -1,15 +1,16 @@
 # arg 1:  the new package version
 # arg 2:  the old package version
+
 post_upgrade() {
-if [ "$(vercmp $2 100)" -lt 0 ]; then
-  echo "ATTENTION UDEV:"
-  echo "----------"
-  echo "udev >=098 rules syntax has changed, please update your own rules."
-  echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
-  echo "Please read the instructions carefully before reboot."
-  echo "They are located in /etc/udev/readme-udev-arch.txt"
-  echo "----------"
-fi
+  if [ "$(vercmp $2 100)" -lt 0 ]; then
+    echo "ATTENTION UDEV:"
+    echo "----------"
+    echo "udev >=098 rules syntax has changed, please update your own rules."
+    echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
+    echo "Please read the instructions carefully before reboot."
+    echo "They are located in /etc/udev/readme-udev-arch.txt"
+    echo "----------"
+  fi
 }
 
 post_install() {
@@ -26,7 +27,3 @@ post_install() {
     rmdir ${ROOTDIR}
   fi
 }
-
-op=$1
-shift
-$op $*
diff --git a/abs/core-testing/udev/udev.rules b/abs/core-testing/udev/udev.rules
deleted file mode 100644
index f789e50..0000000
--- a/abs/core-testing/udev/udev.rules
+++ /dev/null
@@ -1,456 +0,0 @@
-# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-#
-# This ruleset should provide a DevFS-compatible device tree.
-#
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-#    For example, 'sda3' has a "kernel number" of '3'
-# %k the kernel name for the device.
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute.
-# %% the '%' char itself.
-#
-# There are a number of modifiers that are allowed to be used in some of the
-# fields.  See the udev man page for a full description of them.
-# global stuff
-#
-
-#####################################
-# Early rules - begin
-#####################################
-# wait for sysfs
-ACTION=="add", KERNEL=="[0-9]*:[0-9]*", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
-# Setting timeout for tape-devices (type 1) to 900 seconds
-# and 60 seconds for device types 0, 7 and 14
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
-#####################################
-# Early rules -end
-#####################################
-
-#####################################
-###### Hotplug rules - begin
-#####################################
-# check if the device has already been claimed by a driver
-ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_driver_loaded"
-ACTION!="add", GOTO="hotplug_not_add_event"
-
-#Skip auto-loading of framebuffer devices
-KERNEL=="fb[0-9]*", GOTO="hotplug_driver_loaded"
-
-# Modaliases to load
-ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
-
-# SCSI addon modules
-SUBSYSTEM=="scsi", ATTRS{type}=="[07]", RUN+="/lib/udev/load-modules.sh sd_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="14", RUN+="/lib/udev/load-modules.sh sd_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sr_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}!="ADR*", RUN+="/lib/udev/load-modules.sh osst"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}=="ADR*", RUN+="/lib/udev/load-modules.sh st"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}!="Onstream", RUN+="/lib/udev/load-modules.sh st"
-SUBSYSTEM=="scsi", ATTRS{type}=="[235689]", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
-
-# load sg module for burners
-SUBSYSTEM=="block", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sg"
-
-# MMC block devices
-SUBSYSTEM=="mmc", RUN+="/lib/udev/load-modules.sh mmc_block"
-
-# I2O block devices
-SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
-
-# Skip already claimed drivers
-DRIVERS=="?*", GOTO="hotplug_driver_loaded"
-
-# PNP modules
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/load-modules.sh pnp:d$$id; /lib/udev/load-modules.sh pnp:c$$id ; done < /sys$devpath/id'"
-
-# SOUND addon modules
-SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-pcm-oss"
-SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
-
-LABEL="hotplug_driver_loaded"
-
-#PNP addon modules
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
-# not needed anymore with kernel >= 2.6.21
-#ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc_cmos"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
-
-# PARPORT addon modules
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh ppdev"
-
-# fix ide cdrom detection on old proliant servers
-ACTION=="add", SUBSYSTEM=="pci", ENV{MODALIAS}=="pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00", RUN+="/lib/udev/load-modules.sh ide-generic"
-
-# FIRMWARE
-ACTION=="add", SUBSYSTEM=="firmware", ENV{FIRMWARE}=="?*", RUN+="/lib/udev/firmware.sh"
-LABEL="hotplug_not_add_event"
-#####################################
-##### Hotplug rules - end
-#####################################
-
-#####################################
-###### CD/DVD symlinks - begin
-#####################################
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="sr[0-9]*", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="scd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
-ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
-ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
-ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
-#####################################
-###### CD/DVD symlinks - end
-#####################################
-
-# fix /dev/root symlink
-SUBSYSTEM=="block", RUN+="/lib/udev/root-link.sh"
-
-#####################################
-# Permissions and Symlinks - begin
-#####################################
-# default permissions for all block devices
-SUBSYSTEM=="block", 	GROUP="disk"
-
-# permissions for IDE CD devices
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
-
-# permissions for SCSI CD devices
-SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROUP="optical"
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
-
-# permissions for IDE floppy devices
-SUBSYSTEMS=="ide", KERNEL=="hd*", ATTRS{media}=="floppy*", NAME{all_partitions}="%k", GROUP="floppy"
-
-# permissions for removable devices like cardreaders or sticks
-KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
-
-# permissions for firewire external drives
-KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
-
-# permissions for usb to scsi external adapters
-KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="7", GROUP="storage"
-
-# permissions for ide storage like pcmcia card readers
-ACTION!="add", GOTO="pcmcia_end"
-SUBSYSTEM!="block", GOTO="pcmcia_end"
-KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
-KERNEL=="hd*", IMPORT{parent}=="ID_*"
-KERNEL=="hd*", ENV{ID_TYPE}=="generic", GROUP="storage"
-LABEL="pcmcia_end"
-
-# permissions for SCSI scanners
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
-
-# pty and tty legacy devices
-KERNEL=="pty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
-KERNEL=="tty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
-
-# md block devices
-KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
-
-# device-mapper
-KERNEL=="device-mapper", NAME="mapper/control"
-
-# floppy devices
-KERNEL=="fd[0-9]*", NAME="fd%n", SYMLINK+="floppy/%n fd%nu1440 fd%nu720 fd%nh1200 fd%nu360", GROUP="floppy"
-
-# tty devices
-SUBSYSTEM=="tty",	GROUP="tty"
-KERNEL=="tty[0-9]*",    NAME="vc/%n", SYMLINK+="%k"
-KERNEL=="ttyS[0-9]*",   NAME="tts/%n", SYMLINK+="ttyS%n"
-KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
-
-# vc devices
-KERNEL=="vcs",        NAME="vcc/0", OPTIONS="last_rule"
-KERNEL=="vcs[0-9]*",  NAME="vcc/%n", OPTIONS="last_rule"
-KERNEL=="vcsa",       NAME="vcc/a0", OPTIONS="last_rule"
-KERNEL=="vcsa[0-9]*", NAME="vcc/a%n", OPTIONS="last_rule"
-KERNEL=="ptmx",		MODE="0666", OPTIONS="last_rule"
-KERNEL=="tty",		MODE="0666", OPTIONS="last_rule"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-KERNEL=="dvb*",	PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; A=$${K%%%%.*}; D=$${K#*.}; echo dvb/adapter$$A/$$D'", \
-		NAME="%c", GROUP="video"
-### xorg resets those permissions, adjust your xorg.conf!
-KERNEL=="nvidia*",	GROUP="video"
-KERNEL=="card[0-9]*",	NAME="dri/%k", GROUP="video"
-KERNEL=="3dfx*",	GROUP="video"
-
-# v4l devices
-KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="video0", SYMLINK+="video"
-KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
-KERNEL=="radio0", SYMLINK+="radio"
-KERNEL=="vbi[0-9]*",   NAME="v4l/vbi%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="vbi0", SYMLINK+="vbi"
-KERNEL=="vtx[0-9]*",   NAME="v4l/vtx%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="vtx0", SYMLINK+="vtx"
-
-# i2c devices
-KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
-
-# loop devices
-KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
-
-# ramdisks
-KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
-
-# framebuffer devices
-KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
-
-# misc
-KERNEL=="rtc*",     NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
-KERNEL=="rtc0",     SYMLINK+="rtc"
-KERNEL=="nvram",   NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
-KERNEL=="psaux",   NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k" GROUP="video"
-KERNEL=="uinput",  NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="random",        MODE="0666"
-KERNEL=="urandom",       MODE="0666"
-KERNEL=="mem",           MODE="0640", GROUP="kmem"
-KERNEL=="kmem",          MODE="0640", GROUP="kmem"
-KERNEL=="port",          MODE="0640", GROUP="kmem"
-KERNEL=="full",          MODE="0666"
-KERNEL=="null",          MODE="0666"
-KERNEL=="zero",          MODE="0666"
-KERNEL=="sgi_fetchop",   MODE="0666"
-KERNEL=="sonypi",        MODE="0666"
-KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid", SYMLINK="%k"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr", SYMLINK="%k"
-
-# sound devices
-# alsa devices
-SUBSYSTEM=="sound",	GROUP="audio"
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hw[CD0-9]*",     NAME="snd/%k"
-KERNEL=="pcm[CD0-9cp]*",  NAME="snd/%k"
-KERNEL=="midi[CD0-9]*",   NAME="snd/%k"
-KERNEL=="timer",          NAME="snd/%k"
-KERNEL=="seq",            NAME="snd/%k"
-# oss devices
-KERNEL=="audio*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dmmidi*",    NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="admmidi*",   NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dsp*",       NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="adsp*",      NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="midi*",      NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="amidi*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="mixer*",     NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
-
-# input devices
-KERNEL=="mice",   NAME="input/%k", MODE="0644"
-KERNEL=="mouse*", NAME="input/%k", MODE="0644"
-KERNEL=="event*", NAME="input/%k"
-KERNEL=="js*",    NAME="input/%k", MODE="0664"
-KERNEL=="ts*",	 NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# USB devices
-KERNEL=="hiddev*",	NAME="usb/%k"
-KERNEL=="auer*",		NAME="usb/%k"
-KERNEL=="legousbtower*",	NAME="usb/%k", MODE="0666"
-KERNEL=="dabusb*",	NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*",	NAME="usb/%k", GROUP="lp"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Palm Handheld*", SYMLINK+="pilot"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="palmOne Handheld*", SYMLINK+="pilot"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Handspring Visor*", SYMLINK+="pilot"
-
-# printer devices
-SUBSYSTEM=="printer",	GROUP="lp"
-
-# netlink devices
-KERNEL=="route",		NAME="netlink/%k"
-KERNEL=="skip",		NAME="netlink/%k"
-KERNEL=="usersock",	NAME="netlink/%k"
-KERNEL=="fwmonitor",	NAME="netlink/%k"
-KERNEL=="tcpdiag",	NAME="netlink/%k"
-KERNEL=="nflog",		NAME="netlink/%k"
-KERNEL=="xfrm",		NAME="netlink/%k"
-KERNEL=="arpd",		NAME="netlink/%k"
-KERNEL=="route6",	NAME="netlink/%k"
-KERNEL=="ip6_fw",	NAME="netlink/%k"
-KERNEL=="dnrtmsg",	NAME="netlink/%k"
-### ! disabled seems to break device creation !
-# KERNEL=="tap*",		NAME="netlink/%k"
-
-# CAPI devices
-KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi*",		NAME="capi/%n"
-
-# Network devices
-KERNEL=="tun",		NAME="net/%k", OPTIONS+="ignore_remove"
-KERNEL=="ppp",          OPTIONS+="ignore_remove"
-
-# IEEE1394 (firewire) devices
-KERNEL=="raw1394", NAME="%k", GROUP="video"
-KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
-KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
-
-# raw devices
-KERNEL=="raw[0-9]*",     NAME="raw/%k" 
-
-# kbd devices
-KERNEL=="kbd",		MODE="0664"
-
-# packet devices
-KERNEL=="pktcdvd",	NAME="pktcdvd/control", GROUP="optical", MODE="0660"
-KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="optical", MODE="0660"
-
-# usbfs-like device nodes, libusb device access
-# for kernel 2.6.21 and below
-SUBSYSTEM=="usb_device", ACTION=="add", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev};printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0664"
-# starting from kernel 2.6.22 use this rule
-SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664" 
-#######################################
-# Permissions and Symlinks - end
-#######################################
-
-#######################################
-# Persistant block device stuff - begin
-#######################################
-# persistent storage links: /dev/{disk,tape}/{by-id,by-uuid,by-label,by-path,by-name}
-# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
-
-# needed like this!!!
-ACTION!="add|change", GOTO="persistent_storage_end"
-KERNEL=="nst[0-9]", SUBSYSTEMS=="scsi", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
-
-# type 8 devices are "Medium Changers"
-KERNEL=="sg*", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-SUBSYSTEM!="block", GOTO="persistent_storage_end"
-
-# skip rules for inappropriate block devices
-# don't add dm-*!!!
-KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*", GOTO="persistent_storage_end"
-
-# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
-KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
-KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GOTO="persistent_storage_end"
-
-# ignore partitions that span the entire disk
-ATTR{whole_disk}=="*", GOTO="persistent_storage_end"
-
-# /sys/class/block will export this
-ENV{DEVTYPE}!="?*", ATTR{range}=="?*", ENV{DEVTYPE}="disk"
-ENV{DEVTYPE}!="?*", ATTR{start}=="?*", ENV{DEVTYPE}="partition"
-
-# for partitions import parent information
-ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
-
-# by-id (hardware serial number)
-KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
-KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
-KERNEL=="hd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"
-
-KERNEL=="sd*[!0-9]|sr*|st*", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_SUBSYSTEMS}="ieee1394"
-KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export %p"
-KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode"
-KERNEL=="cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --ignore-sysfs -s %p -d $tempnode", ENV{ID_BUS}="cciss"
-KERNEL=="sd*[!0-9]|sr*|cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="sd*[0-9]|cciss*p[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
-KERNEL=="st*", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-
-# libata compat (links like hd*)
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_VENDOR}=="ATA", PROGRAM="/lib/udev/ata_id $tempnode", RESULT=="?*", ENV{ID_ATA_COMPAT}="$result", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}"
-KERNEL=="sd*[0-9]", ENV{ID_ATA_COMPAT}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}-part%n"
-
-KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
- 
-# by-path (shortest physical path)
-ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/path_id %p"
-ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
-ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
-KERNEL=="st*", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
-
-KERNEL=="sr*|st*", GOTO="persistent_storage_end"
-KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GOTO="persistent_storage_end"
-
-# by-label/by-uuid (filesystem properties)
-IMPORT{program}="/lib/udev/vol_id --export $tempnode"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-
-# BIOS Enhanced Disk Device
-ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/edd_id --export $tempnode"
-ENV{DEVTYPE}=="disk", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}"
-ENV{DEVTYPE}=="partition", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}-part%n"
-LABEL="persistent_storage_end"
-
-# md links hook into "change" events, when the array becomes available
-KERNEL!="md[0-9]*", GOTO="md_end"
-ACTION!="add|change", GOTO="md_end"
-
-ATTR{md/array_state}=="|clear|inactive", GOTO="md_end"
-IMPORT{program}="/lib/udev/vol_id --export $tempnode"
-OPTIONS="link_priority=100"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-LABEL="md_end"
-# Persistant block device stuff - end
-#####################################
-
-#######################################
-# Persistant input stuff - begin
-#######################################
-SUBSYSTEM!="input",                     GOTO="persistent_input_end"
-ACTION!="add",                          GOTO="persistent_input_end"
-# ignore the mid-level drivers
-KERNEL=="input[0-9]*",                  GOTO="persistent_input_end"
- 
-# usb devices
-SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="01", ENV{ID_CLASS}="kbd"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="02", ENV{ID_CLASS}="mouse"
-
-# other devices
-DRIVERS=="pcspkr",                       ENV{ID_CLASS}="spkr"
-DRIVERS=="atkbd",                        ENV{ID_CLASS}="kbd"
-DRIVERS=="psmouse",                      ENV{ID_CLASS}="mouse"
-ATTRS{name}=="*dvb*|*DVB*|* IR *",      ENV{ID_CLASS}="ir"
-ATTRS{modalias}=="input:*-*a[068],*|input:*-*a*,[68],*m*", ATTRS{modalias}!="input:*-*k*14A,*r*", ENV{ID_CLASS}="joystick"
-
-# fill empty serial number
-ENV{ID_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
-
-# by-id links, generic and for the event devices
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{ID_CLASS}"
-
- 
-# by-path links
-IMPORT{program}="/lib/udev/path_id %p"
-KERNEL=="mouse*|js*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{ID_CLASS}"
-KERNEL=="event*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{ID_CLASS}" 
-
-LABEL="persistent_input_end"
-#####################################
-# Persistant input stuff - end
-#####################################
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
-
-# debugging monitor
-RUN+="socket:/org/kernel/udev/monitor"
diff --git a/abs/core-testing/udev/usb-storage.rules b/abs/core-testing/udev/usb-storage.rules
deleted file mode 100644
index a7e0726..0000000
--- a/abs/core-testing/udev/usb-storage.rules
+++ /dev/null
@@ -1,4 +0,0 @@
-SUBSYSTEMS=="usb", KERNEL=="sd[b-z]", NAME="%k", SYMLINK+="usb-%k", GROUP="users", OPTIONS="last_rule"
-ACTION=="add", SUBSYSTEMS=="usb", KERNEL=="sd[b-z][0-9]", SYMLINK+="usb-%k", GROUP="users", NAME="%k"
-ACTION=="add", SUBSYSTEMS=="usb", KERNEL=="sd[b-z][0-9]", RUN+="/etc/udev/scripts/mount-usb mount %k", OPTIONS="last_rule"
-ACTION=="remove", SUBSYSTEMS=="block", RUN+="/etc/udev/scripts/mount-usb umount %k", OPTIONS="last_rule"#