Merge branch 'testing' of ssh://cesman@linhes.org/mount/repository/linhes_pkgbuild into testing

1 files changed, 329 insertions, 2 deletions

diff --git a/abs/core/LinHES-system/LinHES-session b/abs/core/LinHES-system/LinHES-session
index 815c3d5..39a60b0 100755
--- a/abs/core/LinHES-system/LinHES-session
+++ b/abs/core/LinHES-system/LinHES-session
@@ -2,17 +2,344 @@
 . /etc/profile
 . /etc/systemconfig
 
+if [ -e /etc/X11/WINDOWMANAGER ]
+then
+    . /etc/X11/WINDOWMANAGER
+fi
+
 xhost +local:
 xhost +127.0.0.1
 xset -dpms s off
+
 export MALLOC_CHECK_=0
-#start fluxbox
+
+
+
+# # Run any scripting that applies to special hardware.  These brand-specific commands that run
+# # after Tweaker will, of course, override generic or hardware-specific settings.
+# SpecialHardwareCommands() {
+#     special_hardware_file=/myth/.special_hardware_type
+#     special_hardware=`cat $special_hardware_file`
+#
+#     case $special_hardware in
+#         dragon*)
+#             sudo -E twk_audio.pl --implement digital
+#             sudo -E twk_dragon.pl --implement all
+#             ;;
+#         ausdragon*)
+#             ;;
+#         *)
+#             # there are no brand-specific commands for configuring whatever
+#             # special hardware the user chose
+#             ;;
+#     esac
+# }
+
+
+
+. /etc/osd_cat.cfg || {
+        color=yellow
+        outline=2
+        outlinecolour=black
+        shadow=0
+        shadowcolour=black
+        font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
+}
+
+function msg(){
+    echo -e "$1"  | osd_cat --pos=middle --align=center --offset=200 --delay=5 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font &
+}
+
+
+function unclutter(){
+    if [ -e /etc/unclutter ]
+    then
+        . /etc/unclutter.cfg
+    else
+        idle=1
+        jitter=200
+    fi
+
+    /usr/X11R6/bin/unclutter -root -idle $idle -jitter $jitter -noevents  &
+}
+
+function keylaunch(){
+    if [ -f /usr/bin/keylaunch ]
+    then
+#       MHOME=`cat /etc/passwd | grep "mythtv" | cut -d":" -f6`
+       if [ ! -e $HOME/.keylaunchrc ]
+       then
+          echo "setting symlink for keylaunch"
+          ln -s /etc/keylaunchrc $HOME/.keylaunchrc
+       fi
+       /usr/bin/keylaunch &
+    fi
+
+}
+
+
+function load_nvidia_settings(){
+    lsmod |cut -f1 -d" " |grep -q nvidia
+    if [ $? = 0 ]
+    then
+        /usr/bin/nvidia-settings --load-config-only
+    fi
+}
+
+function run_tilda(){
+
+
+    if [ -f /usr/bin/tilda ]
+    then
+        if [ ! -e  ~/.tilda/config_0 ]
+        then
+            mkdir -p ~/.tilda/
+        fi
+
+        width=`/usr/bin/xwininfo -root|grep Width | awk '{ print $2}'`
+        height=`/usr/bin/xwininfo -root|grep Height | awk '{ print $2}'`
+	center=$[width/2]
+        sixtypercent=`echo "scale=0; ( $width*.6) / 1" |bc`
+        quarter_height=`echo "scale=0; ($height*.35) /1" |bc`
+	
+
+	if [ $sixtypercent -lt 700 ] 
+	then
+             sixtypercent=700
+        fi
+
+	if [ $quarter_height -lt 350 ] 
+	then
+             quarter_height=350
+        fi
+        startloc=`echo "scale=0 ; (${center}-(${sixtypercent})/2) / 1" |bc`
+
+
+        sed -e "s/^max_width.*$/max_width = $sixtypercent/" \
+            -e "s/^max_height.*$/max_height = $quarter_height/" \
+            -e "s/^x_pos.*$/x_pos = $startloc/g" /etc/tilda_config > ~/.tilda/config_0
+
+        /usr/bin/tilda -h &
+
+    fi
+}
+
+
+function mouse_move(){
+    #move mouse to corner
+    xdotool mousemove 0 0
+}
+
+
+function start_screensaver(){
+
+    if [ x"$Screensavertype" = "xgscreensaver" ]
+    then
+        gnome-screensaver &
+    elif  [ x"$Screensavertype" = "xxscreensaver" ]
+    then
+        xscreensaver  -no-splash &
+    fi
+}
+
+function show_help_tip(){
+
+    if [ x$ShowTips = "x1" ]
+    then
+        msg "Alt+h for help" &
+    fi
+}
+
+function update_apple_trailers(){
+    #update apple trailers
+    if [[ x$RunFrontend = x1 && -f ~/.configure ]]
+    then
+        /usr/bin/php -q /usr/bin/myth_trailers_grabber > /home/mythtv/appletrailer.xml && /usr/bin/fix_aple_url.sh 2>/dev/null &
+    fi
+}
+
+
+function first_configure(){
+    if [ x$STARTUP_STYLE = xmythvantage ]
+    then
+        first_configure_mv
+    else
+        first_configure_default
+    fi
+}
+
+
+function first_configure_default(){
+    if [ !  $SystemType = "Frontend_only" ]
+    then
+        if [  -f ~/.configure ]
+        then
+            # Run Tweaker, which applies generic and hardware-specific settings
+            if [ ! -f ~/.no_meth ]
+            then
+                #remove tweaker cause it's broken and duplicates entries
+                #sudo -E tweaker.pl
+                #/bin/rm /tmp/fps # ??? clean up a temp file that will eventually be obsolete anyway
+                # Run any brand-specific commands, if necessary.
+                SpecialHardwareCommands
+            else
+                rm -f ~/.no_meth
+            fi
+
+        sudo sv stop mythbackend
+        /usr/LH/bin/dtheme.sh
+        xterm -fn *18* -e sudo taskset -c 0 /usr/bin/mythtv-setup
+        sudo sv start mythbackend
+        sudo chown -R mythtv.mythtv /home/mythtv
+        nice -n 19 mythfilldatabase --quiet &
+        msg "Guide data is being loaded. \n Until this completes\n some shows will appear as unknown \n in the program guide."
+        rm ~/.configure
+        fi
+    fi
+}
+
+
+function first_configure_mv(){
+    if [ !  $SystemType = "Frontend_only" ]
+    then
+    if [ ! -f ~/.configured ]
+            then
+            autocard.py -g &
+            MythVantage -b
+            #/root/autocard.py  -g &
+            #/usr/local/bin/mythinstall -b
+
+    #0 yes
+    #1 yes/autodetech
+    #2  no
+            STATUS=$?
+            if [ ! $STATUS = 2 ]
+            then
+                    /usr/bin/backend_control.sh stop BE 127.0.0.1
+                    /usr/local/bin/mythtv-setup
+                    /usr/bin/backend_control.sh start BE 127.0.0.1
+            fi
+            touch  ~/.configured
+            fi
+    fi
+}
+
+function start_myth() {
+    if [ x"$UseMythWelcome" = "x1" ]
+    then
+        STARTCMD="/usr/bin/mythwelcome"
+    else
+        STARTCMD="/usr/bin/mythfrontend -d -l /var/log/mythtv/mythfrontend.log"
+    fi
+
+    echo "====================================================================="
+    echo "Starting $STARTCMD"
+    firstboot.sh &
+
+    #continue on with starting mythtv
+
+    if [ x$STARTUP_STYLE = xmythvantage ]
+    then
+        start_myth_mv
+    else
+        start_myth_default
+    fi
+
+    }
+
+
+function start_myth_default(){
+
+    if [ -f /tmp/nomfe ]
+    then
+        exit 0
+    else
+        if [ -f /tmp/debug ]
+        then
+            echo "using gbd/debug"
+            gdb /usr/bin/mythfrontend -x $MV_ROOT/mfegdbcommands.txt
+            mv gdb.txt gdb.txt.mythfrontend
+            sleep 10
+        else
+            killall -9 irexec
+            /usr/bin/irexec -d
+            $STARTCMD 2>&1 &
+        fi
+    fi
+
+
+
+
+}
+
+
+function start_myth_mv(){
+
+    while [ x = x ]
+    do
+            if [ -f /tmp/nomfe ]
+            then
+                    sleep 120
+            else
+                    if [ -f /tmp/debug ]
+                    then
+
+                            echo "using gbd/debug"
+                            gdb /usr/local/bin/mythfrontend -x $MV_ROOT/mfegdbcommands.txt
+                            bash -c "osdClient.pl localhost 5000 'Restart: mdb.txt.mythfrontend:::SYS' "&
+                            mv gdb.txt gdb.txt.mythfrontend
+                            sleep 10
+
+                    else
+                            killall -9 irexec
+                            /usr/bin/irexec &
+                            $STARTCMD 2>&1
+                    fi
+            fi
+    echo "_______________________________________________________"
+    done
+
+
+    }
+
+
+function set_background()
+{
+    echo "Setting the background"
+
+    }
+
+
 if [ x$WM = "x" ]
 then
 	fluxbox > /var/log/fluxbox.log 2>&1
 
 else
-	$WM 2>&1
+    #if using mythvantage style, start the WM right away
+    # this is done so that starting mythtv can loop.
+
+    if [ x$STARTUP_STYLE = xmythvantage ]
+    then
+        $WM &
+    fi
+    mouse_move
+    keylaunch
+    set_background
+    unclutter
+    load_nvidia_settings
+    run_tilda
+    start_screensaver
+    show_help_tip
+    #update_apple_trailers
+    first_configure
+    start_myth
+
+    # start windowmanger
+    if [ x$STARTUP_STYLE != xmythvantage ]
+    then
+        $WM
+    fi
+
 fi