Mass move of uncompiled packages to abs_not_built.

The will sit here for a bit, and then will be removed completely if no one claims them.

2 files changed, 0 insertions, 611 deletions

diff --git a/abs/core/hwdetect/PKGBUILD b/abs/core/hwdetect/PKGBUILD
deleted file mode 100644
index e386628..0000000
--- a/abs/core/hwdetect/PKGBUILD
+++ /dev/null
@@ -1,19 +0,0 @@
-# $Id: PKGBUILD 86895 2010-08-06 20:29:04Z tpowa $
-# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
-pkgname=hwdetect
-pkgver=2010.08
-pkgrel=1
-pkgdesc="Hardware detection script with loading modules and mkinitcpio.conf / rc.conf support"
-arch=(any)
-license=('GPL')
-depends=('sh' 'awk' 'grep' 'coreutils' 'sed' 'e2fsprogs')
-optdepends=('cryptsetup: for encrypt mkinitcpio config support'
-            'dmraid:     for dmraid mkinitcpio config support'
-            'lvm2:       for lvm2 mkinitcpio config support'
-            'mdadm:      for raid mkinitcpio config support')
-source=(hwdetect)
-
-build() {
-  install -D -m 755 ${srcdir}/hwdetect ${pkgdir}/sbin/hwdetect
-}
-md5sums=('cece9e167bb240c82855ffc3f632a5bb')
diff --git a/abs/core/hwdetect/hwdetect b/abs/core/hwdetect/hwdetect
deleted file mode 100755
index 280cafa..0000000
--- a/abs/core/hwdetect/hwdetect
+++ /dev/null
@@ -1,592 +0,0 @@
-#! /bin/sh
-# Autodetection script for scanning /sys for hardware
-# for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-usage () {
-	echo "$0 [options]"
-	echo ""
-	echo " This is a tool that detects/lists modules that are exported by /sys"
-	echo ""
-	echo "  Options:"
-	echo "    --kernel_version=      use kernel version (no autodetect)"
-	echo "    --ide-legacy           use old ide modules instead of pata"
-	echo "    --load-modules         load all detected modules"
-	echo "    --unload-modules       unload all detected modules"
-	echo "    --show-modules         show all detected modules"
-	echo "    --show-modules-order   shows load order of detected modules"
-	echo "    --show-agp             show AGP modules"
-	echo "    --show-acpi            show ACPI modules"	
-	echo "    --show-ide             show IDE modules"
-	echo "    --show-pata            show PATA modules"
-	echo "    --show-scsi            show SCSI modules"
-	echo "    --show-sata            show SATA modules"
-	echo "    --show-usb             show USB modules"
-	echo "    --show-fw              show FIREWIRE modules"
-	echo "    --show-net             show NETWORK modules"
-	echo "    --show-input           show INPUT modules"
-	echo "    --show-irda            show IRDA modules"
-	echo "    --show-isdn            show ISDN modules"
-	echo "    --show-pcmcia          show PCMCIA modules"
-	echo "    --show-sound           show SOUND modules"
-	echo "    --show-staging         show STAGING modules"
-	echo "    --show-video           show VIDEO modules"
-	echo "    --show-other           show OTHER modules"
-	echo ""
-	echo "  For /etc/mkinitcpio.conf use:"
-	echo "    --filesystem           add filesystems to MODULES="
-	echo "    --hostcontroller       show MODULES= for all hostcontrollers"
-	echo "    --vmware               add BusLogic to MODULES for vmware"
-	echo "    --ati-kms              add ati kernel mode setting" 
-	echo "    --intel-kms            add intel kernel mode setting"
-	echo "    --nvidia-kms           add nvidia kernel mode setting"
-        echo "" 
-	echo "    --rootdevice=          autodetected advanced features of rootdevice"
-	echo "    --hooks-dir=           use this directory for HOOKS check"
-	echo "    --advanced             show autodetected advanced HOOKS"
-	echo "    --hooks                show HOOKS="
-	echo "    --dmraid               add dmraid to HOOKS="
-	echo "    --keymap               add keymap to HOOKS="
-	echo "    --usb                  add usb to HOOKS="
-	echo "    --usbinput             add usbinput to HOOKS="
-	echo "    --fw                   add fw to HOOKS="
-	echo "    --pcmcia               add pcmcia to HOOKS="
-	echo "    --nfs                  add net to HOOKS="
-	echo "    --btrfs                add btrfs to HOOKS="
-	echo ""
-	echo "  For /etc/rc.conf use:"
-	echo "    --net                  show network MODULES"
-	echo "    --sound                show sound MODULES"
-	echo "    --usbhost              show usb hostcontroller MODULES"
-	echo "    --modules              show all detected MODULES"
-	echo ""
-	exit 1
-}
-
-[ "$1" = "" ]       && usage
-[ "$1" = "--help" ] && usage
-[ "$1" = "-h" ]     && usage
-
-# setting kernel version
-case $1 in
-	--kernel_version=*)
-	KERNEL_VERSION="$(echo $1 | awk -F= '{print $2;}')"
-	;;
-	--rootdevice=*)
-	ROOTDEVICE="$(echo $1 | awk -F= '{print $2;}')"
-	;;
-esac
-
-if [ "$KERNEL_VERSION" = "" ]; then
-	KERNEL_VERSION="$(uname -r)"
-fi
-
-# IDE/PATA switch
-[ "$(echo $* | grep '\-ide-legacy')" ] && IDE_LEGACY=1
-
-# uvesafb switch
-[ "$(echo $* | grep '\-uvesafb')" ] && UVESAFB=1
-
-# dmraid switch
-[ "$(echo $* | grep '\-dmraid')" ] && DMRAID=1
-
-# keymap switch
-[ "$(echo $* | grep '\-keymap')" ] && KEYMAP=1
-
-# usb switch
-[ "$(echo $* | grep '\-usb ')" ] && USB=1
-
-# usbinput switch
-[ "$(echo $* | grep '\-usbinput')" ] && USBINPUT=1
-
-# fw switch
-[ "$(echo $* | grep '\-fw')" ] && FW=1
-
-# pcmcia switch
-[ "$(echo $* | grep '\-pcmcia')" ] && PCMCIA=1
-
-# nfs switch
-[ "$(echo $* | grep '\-nfs')" ] && NFS=1
-
-# nfs switch
-[ "$(echo $* | grep '\-btrfs')" ] && BTRFS=1
-
-# vmware switch
-[ "$(echo $* | grep '\-vmware')" ] && VMWARE=1
-
-# vmware switch
-[ "$(echo $* | grep '\-hooks')" ] && HOOKS=1
-
-ADVANCED=""
-# root device check
-if ! [ "$ROOTDEVICE" = "" ]; then
-        # check device mapper devices
-	if [ "$(echo "$ROOTDEVICE" | grep "/dev/mapper")" ]; then
-		# check if encryption is used
-		if [ "$(cryptsetup status $ROOTDEVICE 2>/dev/null)" ]; then
-			ADVANCED="encrypt"
-			# check on lvm
-			realdevice="$(cryptsetup status $ROOTDEVICE 2>/dev/null | grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
-			if [ "$(lvs $realdevice 2>/dev/null)" ]; then
-				ADVANCED="lvm2 encrypt"
-				vg="$(echo $(lvs -o vg_name --noheading $realdevice))"
-				# check on raid
-				[ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/md")" ] && ADVANCED="mdadm lvm2 encrypt"
-			fi
-			# check on raid
-			if [ "$(cryptsetup status $ROOTDEVICE 2>/dev/null | grep "device:.*/dev/md" | sed -e 's#.*\ ##g')" ]; then
-				ADVANCED="mdadm encrypt"
-				realdevice="$(cryptsetup status $ROOTDEVICE 2>/dev/null | grep "device:.*/dev/md" | sed -e 's#.*\ ##g')"
-				# check on lvm
-				[ "$(mdadm --detail $realdevice | grep "/dev/dm-")" ] && ADVANCED="lvm2 mdadm encrypt"
-			fi
-		fi
-		# check if lvm is used
-		if [ "$(lvs $ROOTDEVICE 2>/dev/null)" ]; then
-			ADVANCED="lvm2"
-			vg="$(echo $(lvs -o vg_name --noheading $ROOTDEVICE))"
-			# check on encrypt
-			if [ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/dm-")" ]; then 
-				ADVANCED="encrypt lvm2"
-				# check on raid
-				[ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/md")" ] && ADVANCED="mdadm encrypt lvm2"
-				for i in "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/dm-")"; do
-					realdevice="$(echo $i | cut -d ' ' -f1)"
-					#getsymlink="$(readlink $realdevice)"
-					#correctdevice="$(echo $getsymlink | sed -e 's#\.\.#/dev#g')"
-					[ "$(cryptsetup status $realdevice 2>/dev/null | grep "device:.*/dev/md")" ] && ADVANCED="mdadm encrypt lvm2"
-				done
-			fi
-			# check on raid
-			if [ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/md")" ]; then
-				ADVANCED="mdadm lvm2"
-				#check on encrypt
-				[ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt mdadm lvm2"
-				for i in "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/md")"; do
-					realdevice="$(echo $i | cut -d ' ' -f1)"
-					[ "$(mdadm --detail $realdevice | grep "/dev/dm-")" ] && ADVANCED="encrypt mdadm lvm2"
-				done
-			fi
-		fi
-	fi
-	# check md device
-	if [ "$(echo "$ROOTDEVICE" | grep "/dev/md")" ]; then
-		ADVANCED="mdadm"
-		# raid partitions or raid?
-		if [ "$(echo "$ROOTDEVICE" | grep "/dev/md*p")" ]; then
-			realdevice="$(echo $ROOTDEVICE | sed -e 's#p.*##g' -e 's#/dev/##g')"
-			if ! [ "$(find /sys/block/$realdevice/slaves/ -name 'dm*' 2>/dev/null)" = "" ]; then
-				SET_LVM=""
-				SET_ENCRYPT=""
-				for k in $(find /sys/block/$realdevice/slaves/ -name 'dm*' 2>/dev/null); do
-					[ "$(lvs /dev/mapper/$(cat $k/dm/name) 2>/dev/null)" ] && SET_LVM="1"
-					[ "$(cryptsetup status $(cat $k/dm/name) 2>/dev/null)" ] && SET_ENCRYPT="1"
-					# check on lvm
-					[ "$(lvs /dev/mapper/$(cat $k/dm/name) 2>/dev/null)" ] && ADVANCED="lvm2 mdadm"
-					# check on encrypt
-					[ "$(cryptsetup status $(cat $k/dm/name) 2>/dev/null)" ] && ADVANCED="encrypt mdadm"
-					# check encrypted volume device
-					realdevice="$(cryptsetup status $(cat $k/dm/name) 2>/dev/null | grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
-					[ "$(lvs $realdevice 2>/dev/null)" ] && ADVANCED="lvm2 encrypt mdadm"
-					vg="$(echo $(lvs -o vg_name --noheading /dev/mapper/$(cat $k/dm/name) 2>/dev/null))"
-					[ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt lvm2 mdadm"
-				done
-				[ "$SET_LVM" = "1" -a "$SET_ENCRYPT" = "1" ] && ADVANCED="lvm2 encrypt mdadm"
-			fi
-		else
-			realdevice="$(echo $ROOTDEVICE | sed -e 's#/dev/##g')"
-			if ! [ "$(find /sys/block/$realdevice/slaves/ -name 'dm*' 2>/dev/null)" = "" ]; then
-				SET_LVM=""
-				SET_ENCRYPT=""
-				for k in $(find /sys/block/$realdevice/slaves/ -name 'dm*' 2>/dev/null); do
-					[ "$(lvs /dev/mapper/$(cat $k/dm/name) 2>/dev/null)" ] && SET_LVM="1"
-					[ "$(cryptsetup status $(cat $k/dm/name) 2>/dev/null)" ] && SET_ENCRYPT="1"
-					# check on lvm
-					[ "$(lvs /dev/mapper/$(cat $k/dm/name) 2>/dev/null)" ] && ADVANCED="lvm2 mdadm"
-					# check on encrypt
-					[ "$(cryptsetup status $(cat $k/dm/name) 2>/dev/null)" ] && ADVANCED="encrypt mdadm"
-					# check encrypted volume device
-					realdevice="$(cryptsetup status $(cat $k/dm/name) 2>/dev/null | grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
-					[ "$(lvs $realdevice 2>/dev/null)" ] && ADVANCED="lvm2 encrypt mdadm"
-					vg="$(echo $(lvs -o vg_name --noheading /dev/mapper/$(cat $k/dm/name) 2>/dev/null))"
-					[ "$(pvs -o pv_name,vg_name --noheading | grep "$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt lvm2 mdadm"
-				done
-				[ "$SET_LVM" = "1" -a "$SET_ENCRYPT" = "1" ] && ADVANCED="lvm2 encrypt mdadm"
-			fi
-		fi
-	fi
-fi
-
-# checking /sys
-if ! [ -d /sys/ ]; then
-	echo "/sys/ is not present -- mount /sys first" >&2
-	exit 1
-fi
-
-: >/tmp/modules-plain
-: >/tmp/modules-stripped
-: >/tmp/modules-sorted
-: >/tmp/moduleslist
-: >/tmp/.blkid
-
-# generate blkid
-/sbin/blkid -c /dev/null -s TYPE > /tmp/.blkid
-
-# find pci aliases
-aliases=$(find /sys/ -noleaf -name modalias  -exec cat {} +)
-
-# check for empty aliases
-if [ "$aliases" = "" ]; then
-	echo "hwdetect aborted -- you need a kernel >= 2.6.12" >&2
-	exit 1
-fi
-
-# generate files for the different actions
-modprobe -i -a --set-version=$KERNEL_VERSION --show-depends $aliases >> /tmp/modules-plain 2>/dev/null
-
-# fix ide cdrom detection on proliant 1600
-if [ "$(echo $aliases | grep 'pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00')" ]; then
-	modprobe -i --set-version=$KERNEL_VERSION --show-depends ide-generic >> /tmp/modules-plain 2>/dev/null
-fi
-
-# find PNP devices like parports, soundcards etc.
-#   (workaround for rtc, pcspkr, irtty-sir and analog are included)
-if [ "$(find /sys/devices -noleaf -name 'id' | grep /pnp)" ]; then
-	for i in $(find /sys/devices -noleaf -name "id" | grep /pnp); do
-		devid=$(cat $i | grep PNP)
-		[ "$devid" ] || continue
-	
-		modprobe -i --set-version=$KERNEL_VERSION --show-depends pnp:d${devid} >> /tmp/modules-plain 2>/dev/null
-	
-		[ "$devid" = "PNP0800" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends pcspkr >> /tmp/modules-plain  2>/dev/null
-		[ "$devid" = "PNP0b00" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends rtc_proc >> /tmp/modules-plain  2>/dev/null
-		[ "$devid" = "PNP0b00" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends rtc_sysfs >> /tmp/modules-plain 2>/dev/null
-		[ "$devid" = "PNP0b00" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends rtc_dev >> /tmp/modules-plain 2>/dev/null
-		[ "$devid" = "PNP0510" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends irtty-sir >> /tmp/modules-plain 2>/dev/null
-		[ "$devid" = "PNP0511" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends irtty-sir >> /tmp/modules-plain 2>/dev/null
-		[ "$devid" = "PNPb02f" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends analog >> /tmp/modules-plain 2>/dev/null
-
-		# load ppp-generic if serial ports are detected for modems
-		[ "$devid" = "PNP0501" ] && modprobe -i --set-version=$KERNEL_VERSION --show-depends ppp-generic >> /tmp/modules-plain 2>/dev/null
-	done
-fi
-
-# SCSI disks/cdroms/tapes/generic devices
-if [ "$(find /sys/devices -noleaf -name 'type')" ]; then
-	for i in $(cat $(find /sys/devices -noleaf -name "type")); do
-		case $i in (4|5)       modprobe -i --set-version=$KERNEL_VERSION --show-depends sr_mod >> /tmp/modules-plain 2>/dev/null ;; esac
-		case $i in (2|3|6|8|9) modprobe -i --set-version=$KERNEL_VERSION --show-depends sg >> /tmp/modules-plain 2>/dev/null ;; esac
-		case $i in (0|7|14)    modprobe -i --set-version=$KERNEL_VERSION --show-depends sd_mod >> /tmp/modules-plain 2>/dev/null ;; esac
-		case $i in (1)         modprobe -i --set-version=$KERNEL_VERSION --show-depends st >> /tmp/modules-plain 2>/dev/null ;; esac
-	done
-fi
-
-# add Buslogic for vmware
-if [ "$VMWARE" = "1" ]; then
-	 modprobe -i --set-version=$KERNEL_VERSION --show-depends BusLogic >> /tmp/modules-plain 2>/dev/null
-fi
-
-# Parport modules
-if [ "$(grep 'parport' /tmp/modules-plain)" ]; then
-	modprobe -i --set-version=$KERNEL_VERSION --show-depends lp >> /tmp/modules-plain 2>/dev/null
-	modprobe -i --set-version=$KERNEL_VERSION --show-depends ppdev >> /tmp/modules-plain 2>/dev/null
-fi
-
-# Sound OSS compat modules
-if [ "$(grep 'snd-pcm' /tmp/modules-plain)" ]; then
-	modprobe -i --set-version=$KERNEL_VERSION --show-depends snd-pcm-oss >> /tmp/modules-plain 2>/dev/null
-fi
-if [ "$(grep 'snd-seq' /tmp/modules-plain)" ]; then
-	modprobe -i --set-version=$KERNEL_VERSION --show-depends snd-seq-oss >> /tmp/modules-plain 2>/dev/null
-fi
-
-sort -u /tmp/modules-plain >> /tmp/modules-stripped
-
-# OTHER modules loading first for speed up!
-grep -v "ide/" /tmp/modules-stripped | grep -v "scsi/" | grep -v "fusion/" | grep -v "block/sx8" | grep -v "message/fusion" | \
-	grep -v  "block/cciss" | grep -v "block/cpqarray" | grep -v "block/DAC960" | grep -v "block/virtio" | grep -v "ata/" | \
-	grep -v "net/" | grep -v "pcmcia/" | grep -v "usb/" | \
-	grep -v "firewire" | grep -v "ieee1394/" | grep -v "usbhid/" | grep -v "staging/" | grep -v "wireless/" | grep -v "virtio_pci" >> /tmp/modules-sorted
-# load virtio first!
-grep "virtio_pci" /tmp/modules-stripped  >> /tmp/modules-sorted
-# make a correct order for the modules, internal devices have priority!
-# only use old ide modules if boot parameter 'ide-legacy' is given
-if [ "$IDE_LEGACY" = "1" ]; then
-	grep "ide/" /tmp/modules-stripped  | grep -v "ide-pci-generic" >> /tmp/modules-sorted
-else
-	grep "ata/pata" /tmp/modules-stripped | grep -v "pata_acpi" >> /tmp/modules-sorted
-fi
-grep "scsi/" /tmp/modules-stripped  | grep -v "sd_mod" | grep -v "sr_mod" | grep -v "/sg.ko" | grep -v "/st.ko" >> /tmp/modules-sorted
-grep "block/" /tmp/modules-stripped | grep -v "virtio_blk" | grep -v "sx8" | grep -v "nbd" | grep -v "pktcdvd" | grep -v "floppy" >> /tmp/modules-sorted
-grep "fusion/" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "ata/"  /tmp/modules-stripped| grep -v "pata" | grep -v "ata_generic" | grep -v "libata" >> /tmp/modules-sorted
-grep "block/" /tmp/modules-stripped | grep "sx8" >> /tmp/modules-sorted
-grep "net/" /tmp/modules-stripped | grep -v "wireless/" | grep -v "usb/" >> /tmp/modules-sorted
-grep "wireless/" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "staging/" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "pcmcia/" /tmp/modules-stripped >> /tmp/modules-sorted
-
-# speed up usb module loading
-grep "usb-storage" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "usblp" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "usbhid" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "usb/" /tmp/modules-stripped | grep -v "usb-storage" | grep -v "usbhid" | grep -v "usblp" >> /tmp/modules-sorted
-grep "firewire/" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "ieee1394/" /tmp/modules-stripped >> /tmp/modules-sorted
-
-# add scsi and virtio device modules at the end
-grep "virtio_blk" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "sd_mod" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "sr_mod" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "/st.ko" /tmp/modules-stripped >> /tmp/modules-sorted
-grep "/sg.ko" /tmp/modules-stripped >> /tmp/modules-sorted
-
-
-sed -ne "s#^insmod.*/\(.*\)\.ko.*#\1#p" /tmp/modules-sorted >> /tmp/moduleslist
-
-listmods() {
-	key=$1 ; shift
-	ex=
-	while [ "$1" ]; do
-		[ "$ex" ] && ex="$ex|$1" || ex="$1"
-		shift
-	done
-	for ln in $(grep "$key" /tmp/modules-sorted | sed 's|^insmod ||g'); do
-		if [ "$ex" ]; then
-			echo $ln | egrep -v "$ex" | sed -ne "s#^/.*/\(.*\)\.ko.*#\1#p"
-		else
-			echo $ln | sed -ne "s#^/.*/\(.*\)\.ko.*#\1#p"
-		fi
-	done
-}
-showlist() {
-	cat=$1 ; shift
-	[ $# -gt 0 ] || return
-	echo -n "$cat: "
-	for i in $*; do echo -n "$i "; done
-	echo ""
-}
-
-showlist2() {
-	cat=$1 ; shift
-	[ $# -gt 0 ] || return
-	echo -n "$cat="
-	for i in $*; do echo -n "$i "; done
-	echo ""
-}
-
-showlist3() {
-	cat=$1 ; shift
-	[ $# -gt 0 ] || return
-	for i in $*; do echo -n "$i "; done
-	echo ""
-}
-
-# starting different actions
-while [ $# -gt 0 ]; do
-	case $1 in
-		-hooks-dir=*|--hooks-dir=*)
-			HOOKS_DIR="$(echo $1 | awk -F= '{print $2;}')"
-			 ;;
-		--load-modules)
-			# load all detected pci modules
-			for i in $(cat /tmp/moduleslist); do
-				if [ -e /lib/udev/load-modules.sh ]; then 
-					/lib/udev/load-modules.sh $i > /dev/null 2>&1
-				else
-					modprobe $i > /dev/null 2>&1
-				fi
-			done
-			;;
-
-		--unload-modules)
-			# load all detected pci modules
-			for i in $(cat /tmp/moduleslist); do
-				modprobe -r $i > /dev/null 2>&1
-			done
-			;;
-
-		--show-modules)
-			showlist "AGP    " $(listmods agp/)
-			showlist "ACPI   " $(listmods acpi/)
-			showlist "IDE    " $(listmods ide/ ide-)
-			showlist "PATA   " $(listmods ata/pata pata_acpi) $(listmods ata/ata_piix)
-			showlist "SCSI   " $(listmods virtio/virtio_pci) $(listmods scsi/) $(listmods message/fusion/) $(listmods drivers/block/ nbd pktcdvd sx8 floppy)
-			showlist "SATA   " $(listmods ata/ pata ata_generic) $(listmods drivers/block/sx8)
-			showlist "USB    " $(listmods usb/ usb/input)
-			showlist "FW     " $(listmods firewire/) $(listmods ieee1394/)
-			showlist "NET    " $(listmods net/ irda/)
-			showlist "INPUT  " $(listmods input/ pcspkr) $(listmods hid/)
-			showlist "IRDA   " $(listmods irda/)
-			showlist "ISDN   " $(listmods isdn/)
-			showlist "PCMCIA " $(listmods pcmcia/)
-			showlist "SOUND  " $(listmods pcspkr) $(listmods sound/)
-			showlist "STAGING" $(listmods staging/)
-			showlist "VIDEO  " $(listmods video/)
-			showlist "OTHER  " $(listmods modules/ agp/ acpi/ ide/ scsi/ message/fusion block/sx8 block/cciss block/cpqarray block/DAC960 block/virtio virtio/virtio_pci ata/ usb/ ieee1394 net/ isdn/ input/ irda/ pcmcia/ sound/ video/ firewire/ hid/ staging/)
-			;;
-
-		--show-modules-order)
-			showlist "MODULES ORDER" $(listmods modules/)
-			;;
-
-		--show-agp)    showlist "AGP    " $(listmods agp/) ;;
-		--show-acpi)   showlist "ACPI   " $(listmods acpi/) ;;
-		--show-ide)    showlist "IDE    " $(listmods ide/ ide-) ;;
-		--show-pata)   showlist "PATA   " $(listmods ata/pata pata_acpi) $(listmods ata/ata_piix) ;;
-		--show-scsi)   showlist "SCSI   " $(listmods virtio/virtio_pci) $(listmods scsi/) $(listmods message/fusion/) $(listmods drivers/block/ nbd pktcdvd sx8 floppy) ;;
-		--show-sata)   showlist "SATA   " $(listmods ata/ pata ata_generic) $(listmods drivers/block/sx8) ;;
-		--show-usb)    showlist "USB    " $(listmods usb/ usb/input) ;;
-		--show-fw)     showlist "FW     " $(listmods firewire/) $(listmods ieee1394/) ;;
-		--show-net)    showlist "NET    " $(listmods net/ irda/) ;;
-		--show-input)  showlist "INPUT  " $(listmods input/ pcspkr) $(listmods hid/) ;;
-		--show-irda)   showlist "IRDA   " $(listmods irda/) ;;
-		--show-isdn)   showlist "ISDN   " $(listmods isdn/) ;;
-		--show-pcmcia) showlist "PCMCIA " $(listmods pcmcia/) ;;
-		--show-sound)  showlist "SOUND  " $(listmods pcspkr) $(listmods sound/) ;;
-		--show-staging) showlist "STAGING" $(listmods staging/) ;;
-		--show-video)  showlist "VIDEO  " $(listmods video/) ;;
-		--show-other)  showlist "OTHER  " $(listmods .ko agp/ acpi/ ide/ scsi/ message/fusion block/sx8 block/cciss block/cpqarray block/DAC960 block/virtio virtio/virtio_pci ata/ usb/ ieee1394 net/ isdn/ input/ irda/ pcmcia/ sound/ video/ firewire/ hid/ staging/) ;;
-		--filesystem)   FILESYSTEM="ext2 ext3 ext4 nilfs2 btrfs reiserfs xfs jfs vfat"
-				for i in $FILESYSTEM; do
-					 [ "$(grep $i /tmp/.blkid)" ] && FS="$FS $i"
-				done
-				[ "$(echo $FS | grep btrfs)" ] && FS="$FS crc32c"
-				MODULES_INITRAMFS="$MODULES_INITRAMFS $FS"
-				showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--hostcontroller)HOSTCONTROLLER="$(listmods virtio/virtio_pci) $(listmods ide/ ide-) $(listmods ata/pata pata_acpi) $(listmods scsi/ /sg.ko /st.ko scsi_mod sr_mod sd_mod) $(listmods message/fusion/) $(listmods drivers/block/ virtio_blk nbd pktcdvd sx8 floppy) $(listmods ata/ pata ata_generic) $(listmods drivers/block/sx8) $(listmods ehci-hcd) $(listmods uhci-hcd) $(listmods ohci-hcd) $(listmods virtio_blk)"
-				 MODULES_INITRAMFS="$MODULES_INITRAMFS $HOSTCONTROLLER"
-				 showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				 ;;
-		--ati-kms) 	KMS="radeon"
-				MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
-				showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--intel-kms) 	KMS="i915"
-				MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
-				showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--nvidia-kms) 	KMS="nouveau"
-				MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
-				showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--uvesafb) 	FB="uvesafb"
-				MODULES_INITRAMFS="$FB $MODULES_INITRAMFS"
-				! [ "$HOOKS" = "1" ] && showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--fbmodule) 	FB=""
-				for i in $(cat /etc/modprobe.d/framebuffer_blacklist.conf); do
-				    i=$(echo $i | sed -e 's/blacklist //g')
-				    # check if already in FB array, to avoid double entries
-				    if [ "$(cat /proc/modules | grep ^$i)" ]; then
-					! [ "$(grep -w $FB)" ] && FB="$i"
-				    fi
-                                done
-				MODULES_INITRAMFS="$FB $MODULES_INITRAMFS "
-				! [ "$HOOKS" = "1" ] && showlist2 "MODULES" \"$MODULES_INITRAMFS\" | sed -e 's/(\  /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-				;;
-		--net)  if [ "$(showlist2 "MODULES"  \($(listmods drivers/net/ irda ppp_generic slhc) $(listmods drivers/usb/net/) $(listmods drivers/staging/) \) | sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g' | grep '8139cp')" ] ; then
-				if [ "$(dmesg | grep 'use 8139too')" ]; then
-					MODULES_EXPORTED="$MODULES_EXPORTED $(listmods drivers/net/ irda ppp_generic slhc) $(listmods drivers/usb/net/) $(listmods drivers/staging/)"
-					MODULES_EXPORTED="$(echo $MODULES_EXPORTED | sed -e 's/8139cp//g')"
-					BLACKLIST_UDEV="!8139cp"
-					for i in $MODULES_EXPORTED; do
-						BLACKLIST_UDEV="$BLACKLIST_UDEV !$i"
-					done
-					showlist2 "MODULES"  \($BLACKLIST_UDEV $MODULES_EXPORTED\) | sed -e 's/(\  /(/g' -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-				else
-					MODULES_EXPORTED="$MODULES_EXPORTED $(listmods drivers/net/ irda ppp_generic slhc) $(listmods drivers/usb/net/) $(listmods drivers/staging/)"
-					MODULES_EXPORTED="$(echo $MODULES_EXPORTED | sed -e 's/8139too//g')"
-					BLACKLIST_UDEV="!8139too"
-					for i in $MODULES_EXPORTED; do
-						BLACKLIST_UDEV="$BLACKLIST_UDEV !$i"
-					done
-					showlist2 "MODULES"  \($BLACKLIST_UDEV $MODULES_EXPORTED\) | sed -e 's/(\  /(/g' -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-				fi
-			else
-				MODULES_EXPORTED="$MODULES_EXPORTED $(listmods drivers/net/ irda ppp_generic slhc) $(listmods drivers/usb/net/) $(listmods drivers/staging/)"
-				BLACKLIST_UDEV=""
-				for i in $MODULES_EXPORTED; do
-					BLACKLIST_UDEV="$BLACKLIST_UDEV !$i"
-				done
-				showlist2 "MODULES"  \($BLACKLIST_UDEV $MODULES_EXPORTED\) | sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-			fi
-			;;
-		--sound) MODULES_EXPORTED="$MODULES_EXPORTED $(listmods pcspkr) $(listmods sound/)"
-			 BLACKLIST_UDEV=""
-			 for i in $MODULES_EXPORTED; do
-				BLACKLIST_UDEV="$BLACKLIST_UDEV !$i"
-			 done
-			 showlist2 "MODULES" \($BLACKLIST_UDEV $MODULES_EXPORTED\) | sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-			 ;;
-		--usbhost) MODULES_EXPORTED="$MODULES_EXPORTED $(listmods ehci-hcd) $(listmods uhci-hcd) $(listmods ohci-hcd)"
-			 BLACKLIST_UDEV=""
-			 for i in $MODULES_EXPORTED; do
-				BLACKLIST_UDEV="$BLACKLIST_UDEV !$i"
-			 done
-			 showlist2 "MODULES" \($BLACKLIST_UDEV $MODULES_EXPORTED\) | sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-			 ;;
-		--modules) showlist2 "MODULES" \($(listmods modules/)\) | sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
-			 ;;
-		--hooks) 
-			if [ "$HOOKS_DIR" = "" ]; then
-				HOOKS_DIR="/lib/initcpio/install"
-			fi
-			START_HOOKS="base v86d udev keymap autodetect ide pata scsi sata usb fw pcmcia net dmraid usbinput $ADVANCED btrfs filesystems"
-			# remove the ones that don't exist on the system
-			for i in ${START_HOOKS}; do
-				if ! [ -e "${HOOKS_DIR}/$i" ]; then 
-					START_HOOKS=$(echo $START_HOOKS | sed -e "s/${i}\ //g")
-				fi
-			done
-			# ide/pata check
-			if [ "${IDE_LEGACY}" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/pata//g")
-			else
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/ide//g")
-			fi
-			if !  [ "$USBINPUT" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/usbinput//g")
-			fi
-			if ! [ "$KEYMAP" = "1" ]; then 
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/keymap//g")
-			fi
-			if ! [ "$UVESAFB" = "1" ]; then 
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/v86d//g")
-			fi
-			if ! [ "$DMRAID" = "1" ]; then 
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/dmraid//g")
-			fi
-			if ! [ "$USB" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/usb\ //g")
-			fi
-			if ! [ "$FW" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/fw//g")
-			fi
-			if ! [ "$PCMCIA" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/pcmcia//g")
-			fi
-			if ! [ "$NFS" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/net//g")
-			fi
-			if ! [ "$BTRFS" = "1" ]; then
-				START_HOOKS=$(echo $START_HOOKS | sed -e "s/btrfs//g")
-			fi
-			echo "HOOKS=\"$START_HOOKS\"" | sed -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
-		;;
-		--advanced) ADVANCED_ARCHBOOT=""
-			    for i in $ADVANCED; do
-				ADVANCED_ARCHBOOT="$ADVANCED_ARCHBOOT $(echo arch_$i)"
-			    done
-			    echo "$ADVANCED_ARCHBOOT"
-			    ;;
-	esac
-	shift
-done
-
-# cleanup
-rm /tmp/modules-plain
-rm /tmp/modules-sorted
-rm /tmp/modules-stripped
-rm /tmp/moduleslist
-
-# vim: set ts=2 sw=2 noet: