Merge branch 'testing' of knoppmyth.net:linhes_pkgbuild into testing

3 files changed, 1683 insertions, 26 deletions

diff --git a/abs/core/lirc/PKGBUILD b/abs/core/lirc/PKGBUILD
index 8c3b5a6..a99f7fb 100644
--- a/abs/core/lirc/PKGBUILD
+++ b/abs/core/lirc/PKGBUILD
@@ -1,52 +1,55 @@
-# $Id: PKGBUILD 80419 2010-05-17 08:09:39Z tpowa $
+# $Id: PKGBUILD 97714 2010-11-01 14:32:08Z tpowa $
 # Maintainer: Paul Mattal <paul@archlinux.org>
 
 pkgname=lirc
-pkgver=0.8.6
-pkgrel=5
-_kernver=2.6.34-LinHES
+pkgver=0.8.7
+pkgrel=1
+_kernver=2.6.36-LinHES
 pkgdesc="Linux Infrared Remote Control kernel modules for stock arch kernel"
 arch=('i686' 'x86_64')
 url="http://www.lirc.org/"
 license=('GPL')
-depends=('lirc-utils=0.8.6' 'kernel26>=2.6.34' 'kernel26<2.6.35')
-makedepends=('help2man' 'kernel26-headers>=2.6.34' 'kernel26-headers<2.6.35')
+depends=('lirc-utils=0.8.7' 'kernel26>=2.6.36' 'kernel26<2.6.37')
+makedepends=('help2man' 'kernel26-headers>=2.6.36' 'kernel26-headers<2.6.37')
 replaces=('lirc+pctv')
 options=('!makeflags')
 install=$pkgname.install
-source=("http://prdownloads.sourceforge.net/${pkgname}/${pkgname}-${pkgver}.tar.bz2"
-        'kernel-2.6.33.patch')
-md5sums=('4ca24da6f5e7c2dcea74878c27a4a3f7'
-         'f029698154cf32bc51e5e69879d53a12')
+source=("http://prdownloads.sourceforge.net/${pkgname}/${pkgname}-${pkgver}.tar.bz2")
+md5sums=('fb1dcddbc8ca3d03c7f3a2d40cf28b71')
 
 build() {
 	# configure
-	cd ${srcdir}/lirc-${pkgver} || return 1
+	cd ${srcdir}/lirc-${pkgver}
 	# see http://bugs.gentoo.org/301321
-	patch -p0 -i ../kernel-2.6.33.patch || return 1
+	#patch -p0 -i ../kernel-2.6.33.patch
+        #patch -Np0 -i ../kernel-2.6.35.patch
 	./configure --enable-sandboxed --prefix=/usr \
 		--with-driver=all --with-kerneldir=/usr/src/linux-${_kernver}/ \
 		--with-moduledir=/lib/modules/${_kernver}/kernel/drivers/misc \
-	        --with-transmitter \
-		|| return 1
+	        --with-transmitter
 
 	# disable parallel and bt829
         # because of incompatibility with smp systems
         sed -i -e "s:lirc_parallel::" -e "s:lirc_bt829::" \
-		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
-                || return 1
-
+		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile
+	# lirc_i2c  lirc_igorplugusb  lirc_imon  lirc_it87  lirc_ite8709
+        # lirc_sasem  lirc_serial  lirc_sir lirc_ttusbir lirc_zilog
+        # because part of kernel 2.6.36 staging tree
+        sed -i -e "s:lirc_i2c::" -e "s:lirc_igorplugusb::" -e "s:lirc_imon::" \
+		-e "s:lirc_it87::" -e "s:lirc_ite8709::" -e "s:lirc_sasem::" \
+		-e "s:lirc_serial::" -e "s:lirc_sir::" -e "s:lirc_ttusbir::" \
+		-e "s:lirc_zilog::" Makefile drivers/Makefile drivers/*/Makefile tools/Makefile
 	# disable lirc_gpio due to brokeness of kernel 2.6.23
 	sed -i -e "s:lirc_gpio::" \
-		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
-                || return 1
+		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile
 
 	# build
-	cd drivers || return 1
-	make || return 1
-	make DESTDIR=${pkgdir} install || return 1
+	cd drivers
+	make
+	make DESTDIR=${pkgdir} install
 
 	# set the kernel we've built for inside the install script
 	sed -i -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-		${startdir}/lirc.install || return 1
+		${startdir}/lirc.install
 }
+
diff --git a/abs/core/lirc/kernel-2.6.35.patch b/abs/core/lirc/kernel-2.6.35.patch
new file mode 100644
index 0000000..179fe65
--- /dev/null
+++ b/abs/core/lirc/kernel-2.6.35.patch
@@ -0,0 +1,1654 @@
+--- drivers/lirc_atiusb/lirc_atiusb.c	2009/03/11 00:21:46	1.85
++++ drivers/lirc_atiusb/lirc_atiusb.c	2010/03/17 14:16:15	1.86
+@@ -17,7 +17,7 @@
+  *   Vassilis Virvilis <vasvir@iit.demokritos.gr> 2006
+  *      reworked the patch for lirc submission
+  *
+- * $Id: lirc_atiusb.c,v 1.85 2009/03/11 00:21:46 jarodwilson Exp $
++ * $Id: lirc_atiusb.c,v 1.86 2010/03/17 14:16:15 jarodwilson Exp $
+  */
+ 
+ /*
+@@ -67,7 +69,7 @@
+ #include "drivers/kcompat.h"
+ #include "drivers/lirc_dev/lirc_dev.h"
+ 
+-#define DRIVER_VERSION		"$Revision: 1.85 $"
++#define DRIVER_VERSION		"$Revision: 1.86 $"
+ #define DRIVER_AUTHOR		"Paul Miller <pmiller9@users.sourceforge.net>"
+ #define DRIVER_DESC		"USB remote driver for LIRC"
+ #define DRIVER_NAME		"lirc_atiusb"
+@@ -1374,7 +1376,7 @@
+ 	       DRIVER_VERSION "\n");
+ 	printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ 	dprintk(DRIVER_NAME ": debug mode enabled: "
+-		"$Id: lirc_atiusb.c,v 1.85 2009/03/11 00:21:46 jarodwilson Exp $\n");
++		"$Id: lirc_atiusb.c,v 1.86 2010/03/17 14:16:15 jarodwilson Exp $\n");
+ 
+ 	repeat_jiffies = repeat*HZ/100;
+ 
+--- drivers/lirc_atiusb/lirc_atiusb.c	2010/03/17 14:16:15	1.86
++++ drivers/lirc_atiusb/lirc_atiusb.c	2010/07/24 14:35:58	1.87
+@@ -17,7 +17,7 @@
+  *   Vassilis Virvilis <vasvir@iit.demokritos.gr> 2006
+  *      reworked the patch for lirc submission
+  *
+- * $Id: lirc_atiusb.c,v 1.86 2010/03/17 14:16:15 jarodwilson Exp $
++ * $Id: lirc_atiusb.c,v 1.87 2010/07/24 14:35:58 jarodwilson Exp $
+  */
+ 
+ /*
+@@ -69,7 +69,7 @@
+ #include "drivers/kcompat.h"
+ #include "drivers/lirc_dev/lirc_dev.h"
+ 
+-#define DRIVER_VERSION		"$Revision: 1.86 $"
++#define DRIVER_VERSION		"$Revision: 1.87 $"
+ #define DRIVER_AUTHOR		"Paul Miller <pmiller9@users.sourceforge.net>"
+ #define DRIVER_DESC		"USB remote driver for LIRC"
+ #define DRIVER_NAME		"lirc_atiusb"
+@@ -824,7 +824,11 @@
+ 				ir->devnum);
+ 	case 3:
+ #ifdef KERNEL_2_5
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
++		usb_free_coherent(iep->ir->usbdev, iep->len, iep->buf, iep->dma);
++#else
+ 		usb_buffer_free(iep->ir->usbdev, iep->len, iep->buf, iep->dma);
++#endif
+ #else
+ 		kfree(iep->buf);
+ #endif
+@@ -869,7 +873,11 @@
+ 	iep->len = len;
+ 
+ #ifdef KERNEL_2_5
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
++	iep->buf = usb_alloc_coherent(dev, len, GFP_ATOMIC, &iep->dma);
++#else
+ 	iep->buf = usb_buffer_alloc(dev, len, GFP_ATOMIC, &iep->dma);
++#endif
+ #else
+ 	iep->buf = kmalloc(len, GFP_KERNEL);
+ #endif
+@@ -931,8 +939,13 @@
+ 		}
+ 	case 3:
+ #ifdef KERNEL_2_5
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
++		usb_free_coherent(oep->ir->usbdev, USB_OUTLEN,
++				  oep->buf, oep->dma);
++#else
+ 		usb_buffer_free(oep->ir->usbdev, USB_OUTLEN,
+ 				oep->buf, oep->dma);
++#endif
+ #else
+ 		kfree(oep->buf);
+ #endif
+@@ -965,8 +978,13 @@
+ 		init_waitqueue_head(&oep->wait);
+ 
+ #ifdef KERNEL_2_5
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
++		oep->buf = usb_alloc_coherent(dev, USB_OUTLEN,
++					      GFP_ATOMIC, &oep->dma);
++#else
+ 		oep->buf = usb_buffer_alloc(dev, USB_OUTLEN,
+ 					    GFP_ATOMIC, &oep->dma);
++#endif
+ #else
+ 		oep->buf = kmalloc(USB_OUTLEN, GFP_KERNEL);
+ #endif
+@@ -1376,7 +1394,7 @@
+ 	       DRIVER_VERSION "\n");
+ 	printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ 	dprintk(DRIVER_NAME ": debug mode enabled: "
+-		"$Id: lirc_atiusb.c,v 1.86 2010/03/17 14:16:15 jarodwilson Exp $\n");
++		"$Id: lirc_atiusb.c,v 1.87 2010/07/24 14:35:58 jarodwilson Exp $\n");
+ 
+ 	repeat_jiffies = repeat*HZ/100;
+
+--- drivers/lirc_atiusb/lirc_atiusb.c	2010/07/24 14:35:58	1.87
++++ drivers/lirc_atiusb/lirc_atiusb.c	2010/07/25 16:43:33	1.88
+@@ -17,7 +17,7 @@
+  *   Vassilis Virvilis <vasvir@iit.demokritos.gr> 2006
+  *      reworked the patch for lirc submission
+  *
+- * $Id: lirc_atiusb.c,v 1.87 2010/07/24 14:35:58 jarodwilson Exp $
++ * $Id: lirc_atiusb.c,v 1.88 2010/07/25 16:43:33 jarodwilson Exp $
+  */
+ 
+ /*
+@@ -69,7 +69,7 @@
+ #include "drivers/kcompat.h"
+ #include "drivers/lirc_dev/lirc_dev.h"
+ 
+-#define DRIVER_VERSION		"$Revision: 1.87 $"
++#define DRIVER_VERSION		"$Revision: 1.88 $"
+ #define DRIVER_AUTHOR		"Paul Miller <pmiller9@users.sourceforge.net>"
+ #define DRIVER_DESC		"USB remote driver for LIRC"
+ #define DRIVER_NAME		"lirc_atiusb"
+@@ -824,12 +824,8 @@
+ 				ir->devnum);
+ 	case 3:
+ #ifdef KERNEL_2_5
+-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
+ 		usb_free_coherent(iep->ir->usbdev, iep->len, iep->buf, iep->dma);
+ #else
+-		usb_buffer_free(iep->ir->usbdev, iep->len, iep->buf, iep->dma);
+-#endif
+-#else
+ 		kfree(iep->buf);
+ #endif
+ 		iep->buf = 0;
+@@ -873,12 +869,8 @@
+ 	iep->len = len;
+ 
+ #ifdef KERNEL_2_5
+-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
+ 	iep->buf = usb_alloc_coherent(dev, len, GFP_ATOMIC, &iep->dma);
+ #else
+-	iep->buf = usb_buffer_alloc(dev, len, GFP_ATOMIC, &iep->dma);
+-#endif
+-#else
+ 	iep->buf = kmalloc(len, GFP_KERNEL);
+ #endif
+ 	if (!iep->buf) {
+@@ -939,14 +931,9 @@
+ 		}
+ 	case 3:
+ #ifdef KERNEL_2_5
+-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
+ 		usb_free_coherent(oep->ir->usbdev, USB_OUTLEN,
+ 				  oep->buf, oep->dma);
+ #else
+-		usb_buffer_free(oep->ir->usbdev, USB_OUTLEN,
+-				oep->buf, oep->dma);
+-#endif
+-#else
+ 		kfree(oep->buf);
+ #endif
+ 		oep->buf = 0;
+@@ -978,14 +965,9 @@
+ 		init_waitqueue_head(&oep->wait);
+ 
+ #ifdef KERNEL_2_5
+-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34)
+ 		oep->buf = usb_alloc_coherent(dev, USB_OUTLEN,
+ 					      GFP_ATOMIC, &oep->dma);
+ #else
+-		oep->buf = usb_buffer_alloc(dev, USB_OUTLEN,
+-					    GFP_ATOMIC, &oep->dma);
+-#endif
+-#else
+ 		oep->buf = kmalloc(USB_OUTLEN, GFP_KERNEL);
+ #endif
+ 		if (!oep->buf)
+@@ -1394,7 +1376,7 @@
+ 	       DRIVER_VERSION "\n");
+ 	printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ 	dprintk(DRIVER_NAME ": debug mode enabled: "
+-		"$Id: lirc_atiusb.c,v 1.87 2010/07/24 14:35:58 jarodwilson Exp $\n");
++		"$Id: lirc_atiusb.c,v 1.88 2010/07/25 16:43:33 jarodwilson Exp $\n");
+ 
+ 	repeat_jiffies = repeat*HZ/100;
+ 
+--- drivers/kcompat.h	2009/08/02 11:15:28	5.45
++++ drivers/kcompat.h	2010/07/27 05:43:21	5.50
+@@ -1,4 +1,4 @@
+-/*      $Id: kcompat.h,v 5.45 2009/08/02 11:15:28 lirc Exp $      */
++/*      $Id: kcompat.h,v 5.50 2010/07/27 05:43:21 jarodwilson Exp $      */
+ 
+ #ifndef _KCOMPAT_H
+ #define _KCOMPAT_H
+@@ -9,6 +9,11 @@
+ #define __func__ __FUNCTION__
+ #endif
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)
++#define usb_alloc_coherent usb_buffer_alloc
++#define usb_free_coherent usb_buffer_free
++#endif
++
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 16)
+ #define LIRC_THIS_MODULE(x) x,
+ #else /* >= 2.6.16 */
+@@ -364,6 +369,11 @@
+ #endif /* kernel < 2.6.11 */
+ #endif /* kernel >= 2.6.0 */
+ 
++/*************************** pm_wakeup.h ******************************/
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
++static inline void device_set_wakeup_capable(struct device *dev, int val) {}
++#endif /* kernel < 2.6.27 */
++
+ /*************************** interrupt.h ******************************/
+ /* added in 2.6.18, old defines removed in 2.6.24 */
+ #ifndef IRQF_DISABLED
+@@ -378,6 +388,9 @@
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
+ #define DEFINE_SPINLOCK(x) spinlock_t x = SPIN_LOCK_UNLOCKED
+ #endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)
++#define __SPIN_LOCK_UNLOCKED(x) SPIN_LOCK_UNLOCKED;
++#endif
+ 
+ /***************************** slab.h *********************************/
+ /* added in 2.6.14 */
+@@ -405,4 +418,14 @@
+ #define BIT_WORD(nr)            ((nr) / BITS_PER_LONG)
+ #endif
+ 
++/****************************** kernel.h **********************************/
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define DIV_ROUND_CLOSEST(x, divisor)(                  \
++{                                                       \
++        typeof(divisor) __divisor = divisor;            \
++        (((x) + ((__divisor) / 2)) / (__divisor));      \
++}                                                       \
++)
++#endif
++
+ #endif /* _KCOMPAT_H */
+--- drivers/lirc_igorplugusb/lirc_igorplugusb.c	2009/11/09 18:59:21	1.35
++++ drivers/lirc_igorplugusb/lirc_igorplugusb.c	2010/07/25 16:43:33	1.38
+@@ -450,7 +452,7 @@
+ 	}
+ 
+ #if defined(KERNEL_2_5)
+-	ir->buf_in = usb_buffer_alloc(dev,
++	ir->buf_in = usb_alloc_coherent(dev,
+ 			      DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ 			      GFP_ATOMIC, &ir->dma_in);
+ #else
+@@ -486,7 +488,7 @@
+ 	switch (mem_failure) {
+ 	case 9:
+ #if defined(KERNEL_2_5)
+-		usb_buffer_free(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN,
++		usb_free_coherent(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ 			ir->buf_in, ir->dma_in);
+ #else
+ 		kfree(ir->buf_in);
+@@ -566,7 +568,7 @@
+ 
+ 
+ #if defined(KERNEL_2_5)
+-	usb_buffer_free(dev, ir->len_in, ir->buf_in, ir->dma_in);
++	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+ #else
+ 	kfree(ir->buf_in);
+ #endif
+--- drivers/lirc_mceusb/lirc_mceusb.c	2010/03/17 14:16:16	1.54
++++ drivers/lirc_mceusb/lirc_mceusb.c	2010/07/25 16:43:33	1.70
+@@ -80,6 +80,7 @@
+ #define DRIVER_NAME	"lirc_mceusb"
+ 
+ #define USB_BUFLEN	32	/* USB reception buffer length */
++#define USB_CTRL_MSG_SZ	2	/* Size of usb ctrl msg on gen1 hw */
+ #define LIRCBUF_SIZE	256	/* LIRC work buffer length */
+ 
+ /* MCE constants */
+@@ -95,7 +96,7 @@
+ #define MCE_PULSE_BIT	0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+ #define MCE_PULSE_MASK	0x7F /* Pulse mask */
+ #define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
+-#define MCE_PACKET_LENGTH_MASK  0x7F /* Pulse mask */
++#define MCE_PACKET_LENGTH_MASK  0x7F /* Packet length mask */
+ 
+ 
+ /* module parameters */
+@@ -116,8 +117,8 @@
+ #define RECV_FLAG_IN_PROGRESS	3
+ #define RECV_FLAG_COMPLETE	4
+ 
+-#define MCEUSB_INBOUND		1
+-#define MCEUSB_OUTBOUND		2
++#define MCEUSB_RX		1
++#define MCEUSB_TX		2
+ 
+ #define VENDOR_PHILIPS		0x0471
+ #define VENDOR_SMK		0x0609
+@@ -211,6 +212,8 @@
+ 	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
+ 	/* Formosa Industrial Computing AIM IR605/A */
+ 	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
++	/* Formosa Industrial Computing AIM IR605/A */
++	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+ 	/* Fintek eHome Infrared Transceiver */
+ 	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+ 	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
+@@ -233,8 +236,9 @@
+ 	{ }
+ };
+ 
+-static struct usb_device_id pinnacle_list[] = {
++static struct usb_device_id gen3_list[] = {
+ 	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
++	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+ 	{}
+ };
+ 
+@@ -282,10 +286,9 @@
+ 	unsigned char is_pulse;
+ 	struct {
+ 		u32 connected:1;
+-		u32 pinnacle:1;
+ 		u32 transmitter_mask_inverted:1;
+ 		u32 microsoft_gen1:1;
+-		u32 reserved:28;
++		u32 reserved:29;
+ 	} flags;
+ 
+ 	unsigned char transmitter_mask;
+@@ -295,16 +298,44 @@
+ 	int send_flags;
+ 	wait_queue_head_t wait_out;
+ 
+-	struct mutex lock;
++	struct mutex dev_lock;
+ };
+ 
+-/* init strings */
+-static char init1[] = {0x00, 0xff, 0xaa, 0xff, 0x0b};
+-static char init2[] = {0xff, 0x18};
+-
+-static char pin_init1[] = { 0x9f, 0x07};
+-static char pin_init2[] = { 0x9f, 0x13};
+-static char pin_init3[] = { 0x9f, 0x0d};
++/*
++ * MCE Device Command Strings
++ * Device command responses vary from device to device...
++ * - DEVICE_RESET resets the hardware to its default state
++ * - GET_REVISION fetches the hardware/software revision, common
++ *   replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
++ * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
++ *   device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
++ *   meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
++ *   ((clk / frequency) - 1)
++ * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
++ *   response in the form of 9f 0c msb lsb
++ * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
++ *   the form of 9f 08 bm, where bm is the bitmask
++ * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
++ *   general use one or short-range learning one, in the form of
++ *   9f 14 ss, where ss is either 01 for long-range or 02 for short
++ * - SET_CARRIER_FREQ sets a new carrier mode and frequency
++ * - SET_TX_BITMASK sets the transmitter bitmask
++ * - SET_RX_TIMEOUT sets the receiver timeout
++ * - SET_RX_SENSOR sets which receiver sensor to use
++ */
++static char DEVICE_RESET[]	= {0x00, 0xff, 0xaa};
++static char GET_REVISION[]	= {0xff, 0x0b};
++static char GET_UNKNOWN[]	= {0xff, 0x18};
++static char GET_UNKNOWN2[]	= {0x9f, 0x05};
++static char GET_CARRIER_FREQ[]	= {0x9f, 0x07};
++static char GET_RX_TIMEOUT[]	= {0x9f, 0x0d};
++static char GET_TX_BITMASK[]	= {0x9f, 0x13};
++static char GET_RX_SENSOR[]	= {0x9f, 0x15};
++/* sub in desired values in lower byte or bytes for full command */
++//static char SET_CARRIER_FREQ[]	= {0x9f, 0x06, 0x00, 0x00};
++//static char SET_TX_BITMASK[]	= {0x9f, 0x08, 0x00};
++//static char SET_RX_TIMEOUT[]	= {0x9f, 0x0c, 0x00, 0x00};
++//static char SET_RX_SENSOR[]	= {0x9f, 0x14, 0x00};
+ 
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11)
+ static unsigned long usecs_to_jiffies(const unsigned int u)
+@@ -320,22 +351,126 @@
+ #endif
+ }
+ #endif
+-static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, int len)
++static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
++				 int len, bool out)
+ {
+ 	char codes[USB_BUFLEN * 3 + 1];
++	char inout[9];
+ 	int i;
++	u8 cmd, subcmd, data1, data2;
++	int idx = 0;
+ 
+-	if (len <= 0)
+-		return;
++	if (ir->flags.microsoft_gen1 && !out)
++		idx = 2;
+ 
+-	if (ir->flags.microsoft_gen1 && len <= 2)
++	if (len <= idx)
+ 		return;
+ 
+ 	for (i = 0; i < len && i < USB_BUFLEN; i++)
+ 		snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xFF);
+ 
+-	printk(KERN_INFO "" DRIVER_NAME "[%d]: data received %s (length=%d)\n",
+-		ir->devnum, codes, len);
++	printk(KERN_INFO "" DRIVER_NAME "[%d]: %sx data: %s (length=%d)\n",
++		ir->devnum, (out ? "t" : "r"), codes, len);
++
++	if (out)
++		strcpy(inout, "Request\0");
++	else
++		strcpy(inout, "Got\0");
++
++	cmd    = buf[idx] & 0xff;
++	subcmd = buf[idx + 1] & 0xff;
++	data1  = buf[idx + 2] & 0xff;
++	data2  = buf[idx + 3] & 0xff;
++
++	switch (cmd) {
++	case 0x00:
++		if (subcmd == 0xff && data1 == 0xaa)
++			printk(KERN_INFO "Device reset requested\n");
++		else
++			printk(KERN_INFO "Unknown command 0x%02x 0x%02x\n",
++				cmd, subcmd);
++		break;
++	case 0xff:
++		switch (subcmd) {
++		case 0x0b:
++			if (len == 2)
++				printk(KERN_INFO "Get hw/sw rev?\n");
++			else
++				printk(KERN_INFO "hw/sw rev 0x%02x 0x%02x "
++					"0x%02x 0x%02x\n", data1, data2,
++					buf[4], buf[5]);
++			break;
++		case 0xaa:
++			printk(KERN_INFO "Device reset requested\n");
++			break;
++		case 0xfe:
++			printk(KERN_INFO "Previous command not supported\n");
++			break;
++		case 0x18:
++		case 0x1b:
++		default:
++			printk(KERN_INFO "Unknown command 0x%02x 0x%02x\n",
++				cmd, subcmd);
++			break;
++		}
++		break;
++	case 0x9f:
++		switch (subcmd) {
++		case 0x03:
++			printk(KERN_INFO "Ping\n");
++			break;
++		case 0x04:
++			printk(KERN_INFO "Resp to 9f 05 of 0x%02x 0x%02x\n",
++				data1, data2);
++			break;
++		case 0x06:
++			printk(KERN_INFO "%s carrier mode and freq of 0x%02x 0x%02x\n",
++				inout, data1, data2);
++			break;
++		case 0x07:
++			printk(KERN_INFO "Get carrier mode and freq\n");
++			break;
++		case 0x08:
++			printk(KERN_INFO "%s transmit blaster mask of 0x%02x\n",
++				inout, data1);
++			break;
++		case 0x0c:
++			/* value is in units of 50us, so x*50/100 or x/2 ms */
++			printk(KERN_INFO "%s receive timeout of %d ms\n",
++				inout, ((data1 << 8) | data2) / 2);
++			break;
++		case 0x0d:
++			printk(KERN_INFO "Get receive timeout\n");
++			break;
++		case 0x13:
++			printk(KERN_INFO "Get transmit blaster mask\n");
++			break;
++		case 0x14:
++			printk(KERN_INFO "%s %s-range receive sensor in use\n",
++				inout, data1 == 0x02 ? "short" : "long");
++			break;
++		case 0x15:
++			if (len == 2)
++				printk(KERN_INFO "Get receive sensor\n");
++			else
++				printk(KERN_INFO "Received pulse count is %d\n",
++					((data1 << 8) | data2));
++			break;
++		case 0xfe:
++			printk(KERN_INFO "Error! Hardware is likely wedged...\n");
++			break;
++		case 0x05:
++		case 0x09:
++		case 0x0f:
++		default:
++			printk(KERN_INFO "Unknown command 0x%02x 0x%02x\n",
++				cmd, subcmd);
++			break;
++		}
++		break;
++	default:
++		break;
++	}
+ }
+ 
+ static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+@@ -355,54 +490,48 @@
+ 			ir->devnum, urb->status, len);
+ 
+ 		if (debug)
+-			mceusb_dev_printdata(ir, urb->transfer_buffer, len);
++			mceusb_dev_printdata(ir, urb->transfer_buffer, len, true);
+ 	}
+ 
+ }
+ 
+ /* request incoming or send outgoing usb packet - used to initialize remote */
+-static void request_packet_async(struct mceusb_dev *ir,
+-				 struct usb_endpoint_descriptor *ep,
+-				 unsigned char *data, int size, int urb_type)
++static void mce_request_packet(struct mceusb_dev *ir,
++			       struct usb_endpoint_descriptor *ep,
++			       unsigned char *data, int size, int urb_type)
+ {
+ 	int res;
+ 	struct urb *async_urb;
+ 	unsigned char *async_buf;
+ 
+-	if (urb_type) {
++	if (urb_type == MCEUSB_TX) {
+ 		async_urb = usb_alloc_urb(0, GFP_KERNEL);
+-		if (unlikely(!async_urb))
++		if (unlikely(!async_urb)) {
++			printk(KERN_ERR "Error, couldn't allocate urb!\n");
+ 			return;
++		}
+ 
+-		async_buf = kmalloc(size, GFP_KERNEL);
++		async_buf = kzalloc(size, GFP_KERNEL);
+ 		if (!async_buf) {
++			printk(KERN_ERR "Error, couldn't allocate buf!\n");
+ 			usb_free_urb(async_urb);
+ 			return;
+ 		}
+ 
+-		if (urb_type == MCEUSB_OUTBOUND) {
+-			/* outbound data */
+-			usb_fill_int_urb(async_urb, ir->usbdev,
+-				usb_sndintpipe(ir->usbdev,
+-					ep->bEndpointAddress),
+-				async_buf, size,
+-				(usb_complete_t) usb_async_callback,
+-				ir, ep->bInterval);
+-			memcpy(async_buf, data, size);
+-		} else {
+-			/* inbound data */
+-			usb_fill_int_urb(async_urb, ir->usbdev,
+-				usb_rcvintpipe(ir->usbdev,
+-					ep->bEndpointAddress),
+-				async_buf, size,
+-				(usb_complete_t) usb_async_callback,
+-				ir, ep->bInterval);
+-		}
+-		async_urb->transfer_flags = URB_ASYNC_UNLINK;
+-	} else {
++		/* outbound data */
++		usb_fill_int_urb(async_urb, ir->usbdev,
++			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
++			async_buf, size, (usb_complete_t) usb_async_callback,
++			ir, ep->bInterval);
++		memcpy(async_buf, data, size);
++
++	} else if (urb_type == MCEUSB_RX) {
+ 		/* standard request */
+ 		async_urb = ir->urb_in;
+ 		ir->send_flags = RECV_FLAG_IN_PROGRESS;
++	} else {
++		printk(KERN_ERR "Error! Unknown urb type %d\n", urb_type);
++		return;
+ 	}
+ 
+ 	dprintk(DRIVER_NAME "[%d]: receive request called (size=%#x)\n",
+@@ -421,6 +550,16 @@
+ 		ir->devnum, res);
+ }
+ 
++static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
++{
++	mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
++}
++
++static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
++{
++	mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
++}
++
+ static int unregister_from_lirc(struct mceusb_dev *ir)
+ {
+ 	struct lirc_driver *d = ir->d;
+@@ -496,9 +635,9 @@
+ 	dprintk(DRIVER_NAME "[%d]: mceusb IR device closed\n", ir->devnum);
+ 
+ 	if (ir->flags.connected) {
+-		mutex_lock(&ir->lock);
++		mutex_lock(&ir->dev_lock);
+ 		ir->flags.connected = 0;
+-		mutex_unlock(&ir->lock);
++		mutex_unlock(&ir->dev_lock);
+ 	}
+ 	MOD_DEC_USE_COUNT;
+ }
+@@ -616,7 +755,7 @@
+ 	buf_len = urb->actual_length;
+ 
+ 	if (debug)
+-		mceusb_dev_printdata(ir, urb->transfer_buffer, buf_len);
++		mceusb_dev_printdata(ir, urb->transfer_buffer, buf_len, false);
+ 
+ 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+ 		ir->send_flags = SEND_FLAG_COMPLETE;
+@@ -715,8 +854,7 @@
+ 	cmdbuf[cmdcount++] = 0x80;
+ 
+ 	/* Transmit the command to the mce device */
+-	request_packet_async(ir, ir->usb_ep_out, cmdbuf,
+-			     cmdcount, MCEUSB_OUTBOUND);
++	mce_async_out(ir, cmdbuf, cmdcount);
+ 
+ 	/*
+ 	 * The lircd gap calculation expects the write function to
+@@ -762,9 +900,7 @@
+ 			ir->carrier_freq = carrier;
+ 			dprintk(DRIVER_NAME "[%d]: SET_CARRIER disabling "
+ 				"carrier modulation\n", ir->devnum);
+-			request_packet_async(ir, ir->usb_ep_out,
+-					     cmdbuf, sizeof(cmdbuf),
+-					     MCEUSB_OUTBOUND);
++			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+ 			return carrier;
+ 		}
+ 
+@@ -779,9 +915,7 @@
+ 					ir->devnum, carrier);
+ 
+ 				/* Transmit new carrier to mce device */
+-				request_packet_async(ir, ir->usb_ep_out,
+-						     cmdbuf, sizeof(cmdbuf),
+-						     MCEUSB_OUTBOUND);
++				mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+ 				return carrier;
+ 			}
+ 		}
+@@ -799,7 +933,6 @@
+ {
+ 	int result;
+ 	unsigned int ivalue;
+-	unsigned long lvalue;
+ 	struct mceusb_dev *ir = NULL;
+ 
+ 	/* Retrieve lirc_driver data for the device */
+@@ -828,26 +961,6 @@
+ 		dprintk(DRIVER_NAME ": SET_TRANSMITTERS mask=%d\n", ivalue);
+ 		break;
+ 
+-	case LIRC_GET_SEND_MODE:
+-
+-		result = put_user(LIRC_SEND2MODE(LIRC_CAN_SEND_PULSE &
+-						 LIRC_CAN_SEND_MASK),
+-				  (unsigned long *) arg);
+-
+-		if (result)
+-			return result;
+-		break;
+-
+-	case LIRC_SET_SEND_MODE:
+-
+-		result = get_user(lvalue, (unsigned long *) arg);
+-
+-		if (result)
+-			return result;
+-		if (lvalue != (LIRC_MODE_PULSE&LIRC_CAN_SEND_MASK))
+-			return -EINVAL;
+-		break;
+-
+ 	case LIRC_SET_SEND_CARRIER:
+ 
+ 		result = get_user(ivalue, (unsigned int *) arg);
+@@ -870,45 +983,25 @@
+ 	.ioctl	= mceusb_lirc_ioctl,
+ };
+ 
+-static int mceusb_gen1_init(struct mceusb_dev *ir)
++static void mceusb_gen1_init(struct mceusb_dev *ir)
+ {
+-	int i, ret;
+-	char junk[64], data[8];
+-	int partial = 0;
+-
+-	/*
+-	 * Clear off the first few messages. These look like calibration
+-	 * or test data, I can't really tell. This also flushes in case
+-	 * we have random ir data queued up.
+-	 */
+-	for (i = 0; i < 40; i++)
+-		usb_bulk_msg(ir->usbdev,
+-			usb_rcvbulkpipe(ir->usbdev,
+-				ir->usb_ep_in->bEndpointAddress),
+-			junk, 64, &partial, HZ * 10);
+-
+-	ir->is_pulse = 1;
+-
+-	memset(data, 0, 8);
+-
+-	/* Get Status */
+-	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+-			      USB_REQ_GET_STATUS, USB_DIR_IN,
+-			      0, 0, data, 2, HZ * 3);
+-
+-	/*    ret = usb_get_status( ir->usbdev, 0, 0, data ); */
+-	dprintk("%s - ret = %d status = 0x%x 0x%x\n", __func__,
+-		ret, data[0], data[1]);
++	int ret;
++	int maxp = ir->len_in;
++	char *data;
++
++	data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
++	if (!data) {
++		printk(KERN_ERR "%s: memory allocation failed!\n", __func__);
++		return;
++	}
+ 
+ 	/*
+ 	 * This is a strange one. They issue a set address to the device
+ 	 * on the receive control pipe and expect a certain value pair back
+ 	 */
+-	memset(data, 0, 8);
+-
+ 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
+-			      data, 2, HZ * 3);
++			      data, USB_CTRL_MSG_SZ, HZ * 3);
+ 	dprintk("%s - ret = %d, devnum = %d\n",
+ 		__func__, ret, ir->usbdev->devnum);
+ 	dprintk("%s - data[0] = %d, data[1] = %d\n",
+@@ -933,12 +1026,62 @@
+ 			      0x0000, 0x0100, NULL, 0, HZ * 3);
+ 	dprintk("%s - retC = %d\n", __func__, ret);
+ 
+-	return ret;
++	/* device reset */
++	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* get hw/sw revision? */
++	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
++	mce_sync_in(ir, NULL, maxp);
++
++	kfree(data);
++
++	return;
+ 
+ };
+ 
+-static int mceusb_dev_probe(struct usb_interface *intf,
+-				const struct usb_device_id *id)
++static void mceusb_gen2_init(struct mceusb_dev *ir)
++{
++	int maxp = ir->len_in;
++
++	/* device reset */
++	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* get hw/sw revision? */
++	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* unknown what the next two actually return... */
++	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
++	mce_sync_in(ir, NULL, maxp);
++	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
++	mce_sync_in(ir, NULL, maxp);
++}
++
++static void mceusb_get_parameters(struct mceusb_dev *ir)
++{
++	int maxp = ir->len_in;
++
++	/* get the carrier and frequency */
++	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* get the transmitter bitmask */
++	mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* get receiver timeout value */
++	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
++	mce_sync_in(ir, NULL, maxp);
++
++	/* get receiver sensor setting */
++	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
++	mce_sync_in(ir, NULL, maxp);
++}
++
++static int __devinit mceusb_dev_probe(struct usb_interface *intf,
++				      const struct usb_device_id *id)
+ {
+ 	struct usb_device *dev = interface_to_usbdev(intf);
+ 	struct usb_host_interface *idesc;
+@@ -954,19 +1097,15 @@
+ 	int i;
+ 	char buf[63], name[128] = "";
+ 	int mem_failure = 0;
+-	int is_pinnacle;
+-	int is_microsoft_gen1;
++	bool is_gen3;
++	bool is_microsoft_gen1;
+ 
+ 	dprintk(DRIVER_NAME ": %s called\n", __func__);
+ 
+-	usb_reset_device(dev);
+-
+ 	config = dev->actconfig;
+-
+ 	idesc = intf->cur_altsetting;
+ 
+-	is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0;
+-
++	is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
+ 	is_microsoft_gen1 = usb_match_id(intf, microsoft_gen1_list) ? 1 : 0;
+ 
+ 	/* step through the endpoints to find first bulk in and out endpoint */
+@@ -985,14 +1124,7 @@
+ 				"found\n");
+ 			ep_in = ep;
+ 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+-			if (is_pinnacle)
+-				/*
+-				 * setting seems to 1 seem to cause issues with
+-				 * Pinnacle timing out on transfer.
+-				 */
+-				ep_in->bInterval = ep->bInterval;
+-			else
+-				ep_in->bInterval = 1;
++			ep_in->bInterval = 1;
+ 		}
+ 
+ 		if ((ep_out == NULL)
+@@ -1007,14 +1139,7 @@
+ 				"found\n");
+ 			ep_out = ep;
+ 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+-			if (is_pinnacle)
+-				/*
+-				 * setting seems to 1 seem to cause issues with
+-				 * Pinnacle timing out on transfer.
+-				 */
+-				ep_out->bInterval = ep->bInterval;
+-			else
+-				ep_out->bInterval = 1;
++			ep_out->bInterval = 1;
+ 		}
+ 	}
+ 	if (ep_in == NULL || ep_out == NULL) {
+@@ -1029,39 +1154,27 @@
+ 
+ 	mem_failure = 0;
+ 	ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
+-	if (!ir) {
+-		mem_failure = 1;
+-		goto mem_failure_switch;
+-	}
++	if (!ir)
++		goto mem_alloc_fail;
+ 
+ 	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+-	if (!driver) {
+-		mem_failure = 2;
+-		goto mem_failure_switch;
+-	}
++	if (!driver)
++		goto mem_alloc_fail;
+ 
+-	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+-	if (!rbuf) {
+-		mem_failure = 3;
+-		goto mem_failure_switch;
+-	}
+-
+-	if (lirc_buffer_init(rbuf, sizeof(lirc_t), LIRCBUF_SIZE)) {
+-		mem_failure = 4;
+-		goto mem_failure_switch;
+-	}
+-
+-	ir->buf_in = usb_buffer_alloc(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+-	if (!ir->buf_in) {
+-		mem_failure = 5;
+-		goto mem_failure_switch;
+-	}
++	rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
++	if (!rbuf)
++		goto mem_alloc_fail;
++
++	if (lirc_buffer_init(rbuf, sizeof(lirc_t), LIRCBUF_SIZE))
++		goto mem_alloc_fail;
++
++	ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
++	if (!ir->buf_in)
++		goto buf_in_alloc_fail;
+ 
+ 	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+-	if (!ir->urb_in) {
+-		mem_failure = 7;
+-		goto mem_failure_switch;
+-	}
++	if (!ir->urb_in)
++		goto urb_in_alloc_fail;
+ 
+ 	strcpy(driver->name, DRIVER_NAME " ");
+ 	driver->minor = -1;
+@@ -1078,33 +1191,12 @@
+ 	driver->dev   = &intf->dev;
+ 	driver->owner = THIS_MODULE;
+ 
+-	mutex_init(&ir->lock);
++	mutex_init(&ir->dev_lock);
+ 	init_waitqueue_head(&ir->wait_out);
+ 
+ 	minor = lirc_register_driver(driver);
+ 	if (minor < 0)
+-		mem_failure = 9;
+-
+-mem_failure_switch:
+-
+-	switch (mem_failure) {
+-	case 9:
+-		usb_free_urb(ir->urb_in);
+-	case 7:
+-		usb_buffer_free(dev, maxp, ir->buf_in, ir->dma_in);
+-	case 5:
+-		lirc_buffer_free(rbuf);
+-	case 4:
+-		kfree(rbuf);
+-	case 3:
+-		kfree(driver);
+-	case 2:
+-		kfree(ir);
+-	case 1:
+-		printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
+-			devnum, mem_failure);
+-		return -ENOMEM;
+-	}
++		goto lirc_register_fail;
+ 
+ 	driver->minor = minor;
+ 	ir->d = driver;
+@@ -1113,7 +1205,6 @@
+ 	ir->len_in = maxp;
+ 	ir->overflow_len = 0;
+ 	ir->flags.connected = 0;
+-	ir->flags.pinnacle = is_pinnacle;
+ 	ir->flags.microsoft_gen1 = is_microsoft_gen1;
+ 	ir->flags.transmitter_mask_inverted =
+ 		usb_match_id(intf, transmitter_mask_list) ? 0 : 1;
+@@ -1121,8 +1212,6 @@
+ 	ir->lircdata = PULSE_MASK;
+ 	ir->is_pulse = 0;
+ 
+-	/* ir->flags.transmitter_mask_inverted must be set */
+-	set_transmitter_mask(ir, MCE_DEFAULT_TX_MASK);
+ 	/* Saving usb interface data for use by the transmitter routine */
+ 	ir->usb_ep_in = ep_in;
+ 	ir->usb_ep_out = ep_out;
+@@ -1139,73 +1228,49 @@
+ 	printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
+ 	       dev->bus->busnum, devnum);
+ 
+-	/* inbound data */
++	/* flush buffers on the device */
++	mce_sync_in(ir, NULL, maxp);
++	mce_sync_in(ir, NULL, maxp);
++
++	/* wire up inbound data handler */
+ 	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+ 		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
+ 	ir->urb_in->transfer_dma = ir->dma_in;
+ 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ 
+ 	/* initialize device */
+-	if (ir->flags.pinnacle) {
+-		int usbret;
+-
+-		/*
+-		 * I have no idea why but this reset seems to be crucial to
+-		 * getting the device to do outbound IO correctly - without
+-		 * this the device seems to hang, ignoring all input - although
+-		 * IR signals are correctly sent from the device, no input is
+-		 * interpreted by the device and the host never does the
+-		 * completion routine
+-		 */
+-
+-		usbret = usb_reset_configuration(dev);
+-		printk(DRIVER_NAME "[%d]: usb reset config ret %x\n",
+-		       devnum, usbret);
+-
+-		/*
+-		 * its possible we really should wait for a return
+-		 * for each of these...
+-		 */
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_out, pin_init1, sizeof(pin_init1),
+-				     MCEUSB_OUTBOUND);
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_out, pin_init2, sizeof(pin_init2),
+-				     MCEUSB_OUTBOUND);
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_out, pin_init3, sizeof(pin_init3),
+-				     MCEUSB_OUTBOUND);
+-	} else if (ir->flags.microsoft_gen1) {
+-		/* original ms mce device requires some additional setup */
++	if (ir->flags.microsoft_gen1)
+ 		mceusb_gen1_init(ir);
+-	} else {
++	else if (!is_gen3)
++		mceusb_gen2_init(ir);
+ 
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_out, init1,
+-				     sizeof(init1), MCEUSB_OUTBOUND);
+-		request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+-		request_packet_async(ir, ep_out, init2,
+-				     sizeof(init2), MCEUSB_OUTBOUND);
+-	}
++	mceusb_get_parameters(ir);
+ 
+-	/*
+-	 * if we don't issue the correct number of receives (MCEUSB_INBOUND)
+-	 * for each outbound, then the first few ir pulses will be interpreted
+-	 * by the usb_async_callback routine - we should ensure we have the
+-	 * right amount OR less - as the meusb_dev_recv routine will handle
+-	 * the control packets OK - they start with 0x9f - but the async
+-	 * callback doesn't handle ir pulse packets
+-	 */
+-	request_packet_async(ir, ep_in, NULL, maxp, 0);
++	/* ir->flags.transmitter_mask_inverted must be set */
++	set_transmitter_mask(ir, MCE_DEFAULT_TX_MASK);
+ 
+ 	usb_set_intfdata(intf, ir);
+ 
+ 	return 0;
++
++	/* Error-handling path */
++lirc_register_fail:
++	usb_free_urb(ir->urb_in);
++urb_in_alloc_fail:
++	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
++buf_in_alloc_fail:
++	lirc_buffer_free(rbuf);
++mem_alloc_fail:
++	kfree(rbuf);
++	kfree(driver);
++	kfree(ir);
++	printk(KERN_ERR "out of memory (code=%d)\n", mem_failure);
++
++	return -ENOMEM;
+ }
+ 
+ 
+-static void mceusb_dev_disconnect(struct usb_interface *intf)
++static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
+ {
+ 	struct usb_device *dev = interface_to_usbdev(intf);
+ 	struct mceusb_dev *ir = usb_get_intfdata(intf);
+@@ -1218,11 +1283,11 @@
+ 	ir->usbdev = NULL;
+ 	wake_up_all(&ir->wait_out);
+ 
+-	mutex_lock(&ir->lock);
++	mutex_lock(&ir->dev_lock);
+ 	usb_kill_urb(ir->urb_in);
+ 	usb_free_urb(ir->urb_in);
+-	usb_buffer_free(dev, ir->len_in, ir->buf_in, ir->dma_in);
+-	mutex_unlock(&ir->lock);
++	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
++	mutex_unlock(&ir->dev_lock);
+ 
+ 	unregister_from_lirc(ir);
+ }
+--- drivers/lirc_streamzap/lirc_streamzap.c	2010/03/17 14:16:16	1.48
++++ drivers/lirc_streanzap/lirc_streamzap.c	2010/07/25 16:43:33	1.54
+@@ -1,4 +1,4 @@
+-/*      $Id: lirc_streamzap.c,v 1.48 2009/03/15 09:34:00 lirc Exp $      */
++/*      $Id: lirc_streamzap.c,v 1.54 2010/07/25 16:43:33 jarodwilson Exp $      */
+ /*
+  * Streamzap Remote Control driver
+  *
+@@ -54,7 +56,7 @@
+ #include "drivers/kcompat.h"
+ #include "drivers/lirc_dev/lirc_dev.h"
+ 
+-#define DRIVER_VERSION	"$Revision: 1.48 $"
++#define DRIVER_VERSION	"$Revision: 1.54 $"
+ #define DRIVER_NAME	"lirc_streamzap"
+ #define DRIVER_DESC	"Streamzap Remote Control driver"
+ 
+@@ -83,10 +85,11 @@
+ 
+ #define STREAMZAP_PULSE_MASK 0xf0
+ #define STREAMZAP_SPACE_MASK 0x0f
++#define STREAMZAP_TIMEOUT    0xff
+ #define STREAMZAP_RESOLUTION 256
+ 
+ /* number of samples buffered */
+-#define STREAMZAP_BUFFER_SIZE 128
++#define STREAMZAP_BUFFER_SIZE 256
+ 
+ enum StreamzapDecoderState {
+ 	PulseSpace,
+@@ -154,6 +157,7 @@
+ 	struct timer_list	flush_timer;
+ 	int			flush;
+ 	int			in_use;
++	int			timeout_enabled;
+ };
+ 
+ 
+@@ -317,12 +321,14 @@
+ 
+ 		deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec;
+ 		if (deltv > 15) {
+-			tmp = PULSE_MASK; /* really long time */
++			/* really long time */
++			tmp = LIRC_SPACE(LIRC_VALUE_MASK);
+ 		} else {
+ 			tmp = (lirc_t) (deltv*1000000+
+ 					sz->signal_start.tv_usec -
+ 					sz->signal_last.tv_usec);
+ 			tmp -= sz->sum;
++			tmp = LIRC_SPACE(tmp);
+ 		}
+ 		dprintk("ls %u", sz->driver.minor, tmp);
+ 		push(sz, (char *)&tmp);
+@@ -334,7 +340,7 @@
+ 	pulse = ((lirc_t) value)*STREAMZAP_RESOLUTION;
+ 	pulse += STREAMZAP_RESOLUTION/2;
+ 	sz->sum += pulse;
+-	pulse |= PULSE_BIT;
++	pulse =  LIRC_PULSE(pulse);
+ 
+ 	dprintk("p %u", sz->driver.minor, pulse&PULSE_MASK);
+ 	push(sz, (char *)&pulse);
+@@ -354,6 +360,7 @@
+ 	space = ((lirc_t) value)*STREAMZAP_RESOLUTION;
+ 	space += STREAMZAP_RESOLUTION/2;
+ 	sz->sum += space;
++	space = LIRC_SPACE(space);
+ 	dprintk("s %u", sz->driver.minor, space);
+ 	push(sz, (char *)&space);
+ }
+@@ -426,9 +433,16 @@
+ 				sz->decoder_state = IgnorePulse;
+ 				break;
+ 			case FullSpace:
+-				if (sz->buf_in[i] == 0xff) {
++				if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
+ 					sz->idle = 1;
+ 					stop_timer(sz);
++					if (sz->timeout_enabled) {
++						lirc_t timeout =
++							LIRC_TIMEOUT
++							(STREAMZAP_TIMEOUT *
++							 STREAMZAP_RESOLUTION);
++						push(sz, (char *)&timeout);
++					}
+ 					flush_delay_buffer(sz);
+ 				} else
+ 					push_full_space(sz, sz->buf_in[i]);
+@@ -546,8 +560,8 @@
+ 
+ 	sz->buf_in_len = sz->endpoint->wMaxPacketSize;
+ #ifdef KERNEL_2_5
+-	sz->buf_in = usb_buffer_alloc(sz->udev, sz->buf_in_len,
+-				      GFP_ATOMIC, &sz->dma_in);
++	sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len,
++					GFP_ATOMIC, &sz->dma_in);
+ #else
+ 	sz->buf_in = kmalloc(sz->buf_in_len, GFP_KERNEL);
+ #endif
+@@ -579,8 +593,12 @@
+ 	sz->driver.minor = -1;
+ 	sz->driver.sample_rate = 0;
+ 	sz->driver.code_length = sizeof(lirc_t) * 8;
+-	sz->driver.features = LIRC_CAN_REC_MODE2 | LIRC_CAN_GET_REC_RESOLUTION;
++	sz->driver.features = LIRC_CAN_REC_MODE2 |
++		LIRC_CAN_GET_REC_RESOLUTION |
++		LIRC_CAN_SET_REC_TIMEOUT;
+ 	sz->driver.data = sz;
++	sz->driver.min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
++	sz->driver.max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
+ 	sz->driver.rbuf = &sz->lirc_buf;
+ 	sz->driver.set_use_inc = &streamzap_use_inc;
+ 	sz->driver.set_use_dec = &streamzap_use_dec;
+@@ -657,7 +675,7 @@
+ 	if (sz) {
+ 		usb_free_urb(sz->urb_in);
+ #ifdef KERNEL_2_5
+-		usb_buffer_free(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
++		usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+ #else
+ 		if (sz->buf_in) {
+ 			kfree(sz->buf_in);
+@@ -691,6 +709,8 @@
+ 	sz->flush = 1;
+ 	add_timer(&sz->flush_timer);
+ 
++	sz->timeout_enabled = 0;
++
+ 	sz->urb_in->dev = sz->udev;
+ #ifdef KERNEL_2_5
+ 	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+@@ -733,18 +753,35 @@
+ static int streamzap_ioctl(struct inode *node, struct file *filep,
+ 			   unsigned int cmd, unsigned long arg)
+ {
+-	int result;
++	int result = 0;
++	lirc_t val;
++	unsigned int flag = 0;
++	struct usb_streamzap *sz = lirc_get_pdata(filep);
+ 
+ 	switch (cmd) {
+ 	case LIRC_GET_REC_RESOLUTION:
+ 		result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg);
+-		if (result)
+-			return result;
++		break;
++	case LIRC_SET_REC_TIMEOUT:
++		result = get_user(val, (lirc_t *)arg);
++		if (result == 0) {
++			if (val != STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION)
++				result = -EINVAL;
++		}
++		break;
++	case LIRC_SET_REC_TIMEOUT_REPORTS:
++		result = get_user(flag, (unsigned int *)arg);
++		if (result == 0) {
++			if (flag != 0)
++				sz->timeout_enabled = 1;
++			else
++				sz->timeout_enabled = 0;
++		}
+ 		break;
+ 	default:
+ 		return -ENOIOCTLCMD;
+ 	}
+-	return 0;
++	return result;
+ }
+ 
+ /**
+@@ -788,7 +825,7 @@
+ 	usb_free_urb(sz->urb_in);
+ 
+ #ifdef KERNEL_2_5
+-	usb_buffer_free(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
++	usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+ #else
+ 	kfree(sz->buf_in);
+ #endif
+--- drivers/lirc.h	2009/08/29 07:52:41	5.19
++++ drivers/lirc.h	2010/05/13 15:45:48	5.27
+@@ -1,4 +1,4 @@
+-/*      $Id: lirc.h,v 5.19 2009/08/29 07:52:41 lirc Exp $      */
++/*      $Id: lirc.h,v 5.27 2010/05/13 15:45:48 lirc Exp $      */
+ 
+ #ifndef _LINUX_LIRC_H
+ #define _LINUX_LIRC_H
+@@ -12,8 +12,31 @@
+ #include <sys/ioctl.h>
+ #endif
+ 
+-#define PULSE_BIT  0x01000000
+-#define PULSE_MASK 0x00FFFFFF
++/* <obsolete> */
++#define PULSE_BIT       0x01000000
++#define PULSE_MASK      0x00FFFFFF
++/* </obsolete> */
++
++#define LIRC_MODE2_SPACE     0x00000000
++#define LIRC_MODE2_PULSE     0x01000000
++#define LIRC_MODE2_FREQUENCY 0x02000000
++#define LIRC_MODE2_TIMEOUT   0x03000000
++
++#define LIRC_VALUE_MASK      0x00FFFFFF
++#define LIRC_MODE2_MASK      0xFF000000
++
++#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
++#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
++#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
++#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
++
++#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
++#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
++
++#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
++#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
++#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
++#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+ 
+ typedef int lirc_t;
+ 
+@@ -27,17 +50,17 @@
+ #define LIRC_MODE_RAW                  0x00000001
+ #define LIRC_MODE_PULSE                0x00000002
+ #define LIRC_MODE_MODE2                0x00000004
+-#define LIRC_MODE_CODE                 0x00000008
++/* obsolete: #define LIRC_MODE_CODE                 0x00000008 */
+ #define LIRC_MODE_LIRCCODE             0x00000010
+-#define LIRC_MODE_STRING               0x00000020
++/* obsolete: #define LIRC_MODE_STRING               0x00000020 */
+ 
+ 
+ #define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
+ #define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
+ #define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
+-#define LIRC_CAN_SEND_CODE             LIRC_MODE2SEND(LIRC_MODE_CODE)
++/* obsolete: #define LIRC_CAN_SEND_CODE             LIRC_MODE2SEND(LIRC_MODE_CODE) */
+ #define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
+-#define LIRC_CAN_SEND_STRING           LIRC_MODE2SEND(LIRC_MODE_STRING)
++/* obsolete: #define LIRC_CAN_SEND_STRING           LIRC_MODE2SEND(LIRC_MODE_STRING) */
+ 
+ #define LIRC_CAN_SEND_MASK             0x0000003f
+ 
+@@ -48,9 +71,9 @@
+ #define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
+ #define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
+ #define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
+-#define LIRC_CAN_REC_CODE              LIRC_MODE2REC(LIRC_MODE_CODE)
++/* obsolete: #define LIRC_CAN_REC_CODE              LIRC_MODE2REC(LIRC_MODE_CODE) */
+ #define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
+-#define LIRC_CAN_REC_STRING            LIRC_MODE2REC(LIRC_MODE_STRING)
++/* obsolete: #define LIRC_CAN_REC_STRING            LIRC_MODE2REC(LIRC_MODE_STRING) */
+ 
+ #define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
+ 
+@@ -60,6 +83,10 @@
+ #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
+ #define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
+ #define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
++#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
++#define LIRC_CAN_SET_REC_FILTER           0x08000000
++
++#define LIRC_CAN_MEASURE_CARRIER          0x02000000
+ 
+ #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
+ #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
+@@ -78,10 +105,23 @@
+ #define LIRC_GET_REC_DUTY_CYCLE        _IOR('i', 0x00000006, unsigned int)
+ #define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, unsigned int)
+ 
++#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, lirc_t)
++#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, lirc_t)
++
++#define LIRC_GET_MIN_FILTER_PULSE      _IOR('i', 0x0000000a, lirc_t)
++#define LIRC_GET_MAX_FILTER_PULSE      _IOR('i', 0x0000000b, lirc_t)
++#define LIRC_GET_MIN_FILTER_SPACE      _IOR('i', 0x0000000c, lirc_t)
++#define LIRC_GET_MAX_FILTER_SPACE      _IOR('i', 0x0000000d, lirc_t)
++
+ /* code length in bits, currently only for LIRC_MODE_LIRCCODE */
+ #define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, unsigned long)
+ 
++/* all values set should be reset by the driver when the device is
++   reopened */
++
++/* obsolete: drivers only support one mode */
+ #define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, unsigned long)
++/* obsolete: drivers only support one mode */
+ #define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, unsigned long)
+ /* Note: these can reset the according pulse_width */
+ #define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, unsigned int)
+@@ -90,6 +130,26 @@
+ #define LIRC_SET_REC_DUTY_CYCLE        _IOW('i', 0x00000016, unsigned int)
+ #define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, unsigned int)
+ 
++/* a value of 0 disables all hardware timeouts and data should be
++   reported as soon as possible */
++#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, lirc_t)
++/* 1 enables, 0 disables timeout reports in MODE2 */
++#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, unsigned int)
++
++/* pulses shorter than this are filtered out by hardware (software
++   emulation in lirc_dev/lircd?) */
++#define LIRC_SET_REC_FILTER_PULSE      _IOW('i', 0x0000001a, lirc_t)
++/* spaces shorter than this are filtered out by hardware (software
++   emulation in lirc_dev/lircd?) */
++#define LIRC_SET_REC_FILTER_SPACE      _IOW('i', 0x0000001b, lirc_t)
++/* if filter cannot be set independently for pulse/space, this should
++   be used */
++#define LIRC_SET_REC_FILTER            _IOW('i', 0x0000001c, lirc_t)
++
++/* if enabled from the next key press on the driver will send
++   LIRC_MODE2_FREQUENCY packets */
++#define LIRC_SET_MEASURE_CARRIER_MODE  _IOW('i', 0x0000001d, unsigned int)
++
+ /*
+  * to set a range use
+  * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the
+@@ -102,4 +162,7 @@
+ 
+ #define LIRC_NOTIFY_DECODE             _IO('i', 0x00000020)
+ 
++#define LIRC_SETUP_START               _IO('i', 0x00000021)
++#define LIRC_SETUP_END                 _IO('i', 0x00000022)
++
+ #endif
+--- drivers/lirc_dev/lirc_dev.c	2009/08/31 16:57:55	1.96
++++ drivers/lirc_dev/lirc_dev.c	2010/05/13 15:45:48	1.105
+@@ -17,7 +17,7 @@
+  *  along with this program; if not, write to the Free Software
+  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+  *
+- * $Id: lirc_dev.c,v 1.96 2009/08/31 16:57:55 lirc Exp $
++ * $Id: lirc_dev.c,v 1.105 2010/05/13 15:45:48 lirc Exp $
+  *
+  */
+ 
+@@ -367,8 +369,7 @@
+ 	ir->chunk_size = ir->buf->chunk_size;
+ 
+ 	if (d->features == 0)
+-		d->features = (d->code_length > 8) ?
+-			LIRC_CAN_REC_LIRCCODE : LIRC_CAN_REC_CODE;
++		d->features = LIRC_CAN_REC_LIRCCODE;
+ 
+ 	ir->d = *d;
+ 	ir->d.minor = minor;
+@@ -541,7 +542,7 @@
+ static int irctl_open(struct inode *inode, struct file *file)
+ {
+ 	struct irctl *ir;
+-	int retval;
++	int retval = 0;
+ 
+ 	if (iminor(inode) >= MAX_IRCTL_DEVICES || !irctls[iminor(inode)]) {
+ 		dprintk("lirc_dev [%d]: open result = -ENODEV\n",
+@@ -591,6 +592,8 @@
+ 		if (ir->task)
+ 			wake_up_process(ir->task);
+ #endif
++	} else {
++		retval = -ENODEV;
+ 	}
+  error:
+ 	if (ir)
+@@ -692,6 +695,23 @@
+ 	case LIRC_GET_FEATURES:
+ 		result = put_user(ir->d.features, (unsigned long *)arg);
+ 		break;
++	case LIRC_GET_LENGTH:
++		result = put_user(ir->d.code_length, (unsigned long *) arg);
++		break;
++	case LIRC_GET_MIN_TIMEOUT:
++		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
++		    ir->d.min_timeout == 0)
++			return -ENOSYS;
++
++		result = put_user(ir->d.min_timeout, (lirc_t *) arg);
++		break;
++	case LIRC_GET_MAX_TIMEOUT:
++		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
++		    ir->d.max_timeout == 0)
++			return -ENOSYS;
++
++		result = put_user(ir->d.max_timeout, (lirc_t *) arg);
++		break;
+ 	case LIRC_GET_REC_MODE:
+ 		if (!(ir->d.features & LIRC_CAN_REC_MASK))
+ 			return -ENOSYS;
+@@ -700,6 +720,16 @@
+ 				  (ir->d.features & LIRC_CAN_REC_MASK),
+ 				  (unsigned long *)arg);
+ 		break;
++	case LIRC_GET_SEND_MODE:
++		if (!(ir->d.features & LIRC_CAN_SEND_MASK))
++			return -ENOSYS;
++
++		result = put_user(LIRC_SEND2MODE
++				  (ir->d.features & LIRC_CAN_SEND_MASK),
++				  (unsigned long *)arg);
++		break;
++
++	/*obsolete */
+ 	case LIRC_SET_REC_MODE:
+ 		if (!(ir->d.features & LIRC_CAN_REC_MASK))
+ 			return -ENOSYS;
+@@ -707,18 +737,30 @@
+ 		result = get_user(mode, (unsigned long *)arg);
+ 		if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
+ 			result = -EINVAL;
+-		/*
+-		 * FIXME: We should actually set the mode somehow but
+-		 * for now, lirc_serial doesn't support mode changing either
+-		 */
+ 		break;
+-	case LIRC_GET_LENGTH:
+-		result = put_user(ir->d.code_length, (unsigned long *) arg);
++	case LIRC_SET_SEND_MODE:
++		if (!(ir->d.features & LIRC_CAN_SEND_MASK))
++			return -ENOSYS;
++
++		result = get_user(mode, (unsigned long *)arg);
++		if (!result && !(LIRC_MODE2SEND(mode) & ir->d.features))
++			result = -EINVAL;
+ 		break;
+ 	default:
+ 		result = -EINVAL;
+ 	}
+ 
++	switch (cmd) {
++	case LIRC_SET_REC_MODE:
++	case LIRC_SET_SEND_MODE:
++		printk(KERN_NOTICE LOGHEAD "userspace uses outdated ioctl "
++			"please update your lirc installation\n",
++			ir->d.name, ir->d.minor);
++		break;
++	default:
++		break;
++	}
++
+ 	dprintk(LOGHEAD "ioctl result = %d\n",
+ 		ir->d.name, ir->d.minor, result);
+ 
+@@ -791,16 +833,31 @@
+ 	case LIRC_GET_SEND_DUTY_CYCLE:
+ 	case LIRC_GET_REC_DUTY_CYCLE:
+ 	case LIRC_GET_REC_RESOLUTION:
++	case LIRC_GET_MIN_TIMEOUT:
++	case LIRC_GET_MAX_TIMEOUT:
++	case LIRC_GET_MIN_FILTER_PULSE:
++	case LIRC_GET_MAX_FILTER_PULSE:
++	case LIRC_GET_MIN_FILTER_SPACE:
++	case LIRC_GET_MAX_FILTER_SPACE:
+ 	case LIRC_SET_SEND_CARRIER:
+ 	case LIRC_SET_REC_CARRIER:
+ 	case LIRC_SET_SEND_DUTY_CYCLE:
+ 	case LIRC_SET_REC_DUTY_CYCLE:
+ 	case LIRC_SET_TRANSMITTER_MASK:
++	case LIRC_SET_REC_TIMEOUT:
++	case LIRC_SET_REC_TIMEOUT_REPORTS:
++	case LIRC_SET_REC_FILTER_PULSE:
++	case LIRC_SET_REC_FILTER_SPACE:
++	case LIRC_SET_REC_FILTER:
++	case LIRC_SET_MEASURE_CARRIER_MODE:
+ 	case LIRC_SET_REC_DUTY_CYCLE_RANGE:
+ 	case LIRC_SET_REC_CARRIER_RANGE:
++	case LIRC_NOTIFY_DECODE:
++	case LIRC_SETUP_START:
++	case LIRC_SETUP_END:
+ 		/*
+-		 * These commands expect (unsigned int *)arg
+-		 * so no problems here. Just handle the locking.
++		 * These commands expect (unsigned int *) or (lirc_t *)
++		 * arg so no problems here. Just handle the locking.
+ 		 */
+ 		lock_kernel();
+ 		cmd = cmd32;
+--- drivers/lirc_dev/lirc_dev.h	2009/12/28 15:21:17	1.38
++++ drivers/lirc_dev/lirc_dev.h	2010/04/25 08:33:52	1.41
+@@ -4,7 +4,7 @@
+  * (L) by Artur Lipowski <alipowski@interia.pl>
+  *        This code is licensed under GNU GPL
+  *
+- * $Id: lirc_dev.h,v 1.38 2009/12/28 15:21:17 jarodwilson Exp $
++ * $Id: lirc_dev.h,v 1.41 2010/04/25 08:33:52 lirc Exp $
+  *
+  */
+ 
+@@ -28,6 +28,8 @@
+ #include <linux/kfifo.h>
+ #endif
+ 
++#include "drivers/lirc.h"
++
+ struct lirc_buffer {
+ 	wait_queue_head_t wait_poll;
+ 	spinlock_t fifo_lock;
+@@ -68,13 +70,13 @@
+ #endif
+ static inline void lirc_buffer_clear(struct lirc_buffer *buf)
+ {
+-	unsigned long flags;
+-
+ #ifdef LIRC_HAVE_KFIFO
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33)
+ 	if (buf->fifo)
+ 		kfifo_reset(buf->fifo);
+ #else
++	unsigned long flags;
++
+ 	if (buf->fifo_initialized) {
+ 		spin_lock_irqsave(&buf->fifo_lock, flags);
+ 		kfifo_reset(&buf->fifo);
+@@ -82,6 +84,8 @@
+ 	}
+ #endif
+ #else
++	unsigned long flags;
++
+ 	lirc_buffer_lock(buf, &flags);
+ 	_lirc_buffer_clear(buf);
+ 	lirc_buffer_unlock(buf, &flags);
+@@ -331,6 +335,8 @@
+ 	int sample_rate;
+ 	unsigned long features;
+ 	void *data;
++	lirc_t min_timeout;
++	lirc_t max_timeout;
+ 	int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+ #ifndef LIRC_REMOVE_DURING_EXPORT
+ 	wait_queue_head_t* (*get_queue) (void *data);
+@@ -338,7 +344,7 @@
+ 	struct lirc_buffer *rbuf;
+ 	int (*set_use_inc) (void *data);
+ 	void (*set_use_dec) (void *data);
+-	struct file_operations *fops;
++	const struct file_operations *fops;
+ 	struct device *dev;
+ 	struct module *owner;
+ };
diff --git a/abs/core/lirc/lirc.install b/abs/core/lirc/lirc.install
index ac4bf13..495e505 100644
--- a/abs/core/lirc/lirc.install
+++ b/abs/core/lirc/lirc.install
@@ -10,7 +10,7 @@ pre_install() {
 post_install() {
   # updating module dependencies
   echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.34-LinHES
+  KERNEL_VERSION=2.6.36-LinHES
   depmod -v $KERNEL_VERSION > /dev/null 2>&1
   /bin/true
 }
@@ -26,7 +26,7 @@ pre_upgrade() {
 post_upgrade() {
   # updating module dependencies
   echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.34-LinHES
+  KERNEL_VERSION=2.6.36-LinHES
   depmod -v $KERNEL_VERSION > /dev/null 2>&1
   /bin/true
 }
@@ -40,7 +40,7 @@ pre_remove() {
 post_remove() {
   # updating module dependencies
   echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.34-LinHES
+  KERNEL_VERSION=2.6.36-LinHES
   depmod -v $KERNEL_VERSION > /dev/null 2>&1
   /bin/true
 }