LinHES 6.01.00

3 files changed, 271 insertions, 0 deletions

diff --git a/abs/core/mplayer-wrapper/PKGBUILD b/abs/core/mplayer-wrapper/PKGBUILD
new file mode 100644
index 0000000..c64875d
--- /dev/null
+++ b/abs/core/mplayer-wrapper/PKGBUILD
@@ -0,0 +1,21 @@
+pkgname=mplayer-wrapper
+pkgver=1	
+pkgrel=9
+pkgdesc="wrapper for mplayer and mplayer derivatives"
+arch=('i686' 'x86_64')
+
+depends=('perl') 
+
+source=(mplayer-wrapper.pl)
+
+license=('GPL2')
+
+install=mplayer-wrapper.install
+build() {
+   LH_ROOT=/usr/LH
+   mkdir -p $startdir/pkg/$LH_ROOT/bin/
+
+   cd $startdir
+   # executables
+   install -m0755 -D *.pl  $startdir/pkg/$LH_ROOT/bin/
+}
diff --git a/abs/core/mplayer-wrapper/mplayer-wrapper.install b/abs/core/mplayer-wrapper/mplayer-wrapper.install
new file mode 100644
index 0000000..18f1b75
--- /dev/null
+++ b/abs/core/mplayer-wrapper/mplayer-wrapper.install
@@ -0,0 +1,38 @@
+# This is a default template for a post-install scriptlet.  You can
+# remove any functions you don't need (and this header).
+
+# arg 1:  the new package version
+pre_install() {
+/bin/true
+}
+
+# arg 1:  the new package version
+post_install() {
+/bin/true
+}
+
+# arg 1:  the new package version
+# arg 2:  the old package version
+pre_upgrade() {
+  /bin/true
+}
+
+# arg 1:  the new package version
+# arg 2:  the old package version
+post_upgrade() {
+  /bin/true
+}
+
+# arg 1:  the old package version
+pre_remove() {
+  /bin/true
+}
+
+# arg 1:  the old package version
+post_remove() {
+  /bin/true
+}
+
+op=$1
+shift
+$op $*
diff --git a/abs/core/mplayer-wrapper/mplayer-wrapper.pl b/abs/core/mplayer-wrapper/mplayer-wrapper.pl
new file mode 100755
index 0000000..da0e838
--- /dev/null
+++ b/abs/core/mplayer-wrapper/mplayer-wrapper.pl
@@ -0,0 +1,212 @@
+#!/usr/bin/perl
+
+use Shell;
+use strict;
+use POSIX qw(floor);
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# including some original code and contributions from Nick C.
+# and graysky.
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# PURPOSE:
+# --------------------------
+# This is a wrapper script that tries to find the best parameters
+# for calling an underlying video player.  The outer layer determines
+# the best playback parameters, while the inner layer picks the best
+# player to call.
+
+# RATIONALE:
+# --------------------------
+# Default video playback options are not optimal on all hardware or
+# for all video types.  In addition, common video players do not
+# offer to bookmark video so that you can resume where you left off.
+# Both of these problems can be addressed by this wrapper.
+
+# PARAMETERS:
+# --------------------------
+# The same parameters you'd use for mplayer, some of which may be
+# translated automatically for use with smplayer.
+
+# FILES:
+# --------------------------
+# $mediafile, the file to play
+
+sub run () {
+    my $mediafile = @ARGV[$#ARGV];
+    my $player = &pick_player();
+
+    # mplayer evaluates configuration options in the following order, with
+    # later-evaluated options overriding earlier-evaluated ones, both within
+    # a given configuration location and between them:
+    # 1) system-wide configuration/profiles, /etc/mplayer/mplayer.conf
+    # 2) user-specific configuration/profiles, ~/.mplayer/config
+    # 3) commandline configuration parameters
+    # 4) file-specific configuration, ~/.mplayer/[filename].conf
+    # 5) any nonstandard configuration file, included via "-include" parameter
+    #
+    # This script's dynamic configuration options fall in at 2.5 above,
+    # so commandline options, file-specific configuration options,
+    # or a nonstandard configuration file will override the options that
+    # the script creates, but system-wide and user-specific configuration
+    # will be overridden by the dynamic configuration options.
+    #
+    # This is sub-optimal, as the easiest way for a user to compensate for
+    # a misfiring configuration rule would be to override it in a configuration
+    # file.  Instead, they will have to change the way they run this script.
+
+    my $player_parameters = join(' ',
+				 &dynamic_parameters($mediafile),
+				 &translate_parameters($player,@ARGV[0..$#ARGV-1]));
+    &player($player,$player_parameters,$mediafile);
+}
+
+&run();
+
+# Translates any parameters into ones that will be compatible with the given player.
+sub translate_parameters() {
+    my($player,@parameters)=@_;
+
+    if ($player eq "smplayer") {
+	# Stupidly, smplayer uses a different set of command-line parameters than generic
+	# mplayer, so we need to translate mplayer-centric ones into the few that are
+	# available in smplayer-ese.
+	my %smplayer_parameter_translation_array = (
+	    "-fs" => "-fullscreen",
+	    "-zoom" => " "
+	    );
+	
+	sub translate() {
+	    my($flag)=@_;
+	    return $smplayer_parameter_translation_array{$flag};
+	}
+	
+	return map(&translate($_), @parameters);
+    } else {
+	# currently, all other players used by this wrapper work with mplayer parameters
+	return @parameters;
+    }
+}
+
+# Returns an array of dynamic parameters based on the media type,
+# the presence of special playback decoding hardware, and the
+# general capability of the CPU.
+sub dynamic_parameters () {
+    my($mediafile)=@_;
+    my @parameters = ();
+    my $codec="";
+    my %vdpau_supported_modes=();
+
+    # See if the GPU and driver support vdpau for GPU-based accelerated decoding
+    my $command="vdpinfo |";
+    # On supported hardware, vdpinfo produces relevant results that look something like this (see
+    # http://www.phoronix.com/forums/showthread.php?t=14493 for additional details, or run
+    # vdpinfo on vdpau-capable hardware yourself):
+    #
+    #MPEG1             0  2  4096  4096
+    #MPEG2_SIMPLE      3  2  4096  4096
+    #MPEG2_MAIN        3  2  4096  4096
+    #H264_MAIN        41  4  4096  4096
+    #H264_HIGH        41  4  4096  4096
+    
+    my $grabbing_modes=0;
+    open(SHELL, $command);
+    while (<SHELL>) {
+	chop;
+	if (m/Decoder Capabilities/gi) {
+	    $grabbing_modes=1;
+	    #print "*** MODES START NOW"
+	} elsif (m/Output Surface/gi) {
+	    $grabbing_modes=0;
+	} elsif ($grabbing_modes) {
+	    if (m/[A-Z]+[0-9]+/g) {
+		s/(_.*)//g;
+		#print "*** GRABBED MODE $_\n";
+		$vdpau_supported_modes{$_} = 1;
+	    }
+	}
+    }
+    close(SHELL);
+    
+    # figure out what codec the video uses
+    my $command="mplayer -identify -frames 0 \"$mediafile\" | grep ID_VIDEO_CODEC | cut -c 16- |";
+    open(SHELL, $command);
+    while (<SHELL>) {
+	chop;
+	$codec = $_;
+	#print "DEBUG: codec is $codec\n";
+    }
+    close(SHELL);
+
+    # We should use vdpau if it's available and helps with the codec we need to decode.
+    if ($codec eq "ffh264") { # h.264
+	if ($vdpau_supported_modes{"H264"}) {
+	    push(@parameters, "-vo vdpau");
+	    push(@parameters, "-vc ffh264vdpau");
+	}
+    } elsif ($codec eq "ffmpeg2") { # MPEG2
+	if ($vdpau_supported_modes{"MPEG2"}) {
+	    push(@parameters, "-vo vdpau");
+	    push(@parameters, "-vc ffmpeg12vdpau");
+	}
+
+	# ??? although MPEG1 is rare, it seems as if it should work with -vc ffmpeg12vdpau as well
+	
+	# problems have been reported with WMV3 support
+	
+#    } elsif ($codec eq "ffwmv3") { # WMV3
+#	if ($vdpau_supported) {
+#	push(@parameters, "-vo vdpau");
+#	push(@parameters, "-vc ffwmv3vdpau");
+#    }
+	# problems have been reported with WVC1 support
+	
+#    } elsif ($codec eq "ffvc1") { # WVC1
+#	if ($vdpau_supported) {
+#	push(@parameters, "-vo vdpau");
+#	push(@parameters, "-vc ffvc1vdpau");
+#    }
+
+    } else {
+	push(@parameters, "-vo xv,x11,");
+	push(@parameters, "-vc ,");
+	push(@parameters, "-vf pp=lb,"); # doesn't actually work with vdpau, but doesn't break anything
+    }
+    return(@parameters);
+}
+
+# Find the best player for use on this system.  The script prefers smplayer,
+# which has built-in bookmarking, falling back to mplayer-resumer.pl, which
+# implements bookmarking as an mplayer wrapper, if smplayer cannot be found.
+# Finally, if no bookmarking players can be found, a barebones mplayer is used.
+sub pick_player () {
+    #my @possible_players = ("smplayer", "mplayer-resumer.pl", "mplayer");
+    my @possible_players = ("mplayer-resumer.pl", "mplayer");
+    my $command;
+    my $candidate_player;
+    foreach (@possible_players) {
+	$candidate_player = $_;
+	$command = "which $candidate_player |";
+	open(SHELL, $command);
+	if (<SHELL>) {
+	    #print "player $candidate_player : $_\n";
+	    return $candidate_player;
+	}
+	close(SHELL);
+    }
+}
+
+# Calls player
+sub player () {
+    my($player,$parameters,$mediafile)=@_;
+    my $command = "$player $parameters \"$mediafile\" 2>&1 |";
+
+    print "DEBUG: $0's player command is: *** $command ***\n";
+    open(SHELL, $command);
+    while (<SHELL>) {
+	print $_;
+    }
+    close(SHELL);
+}