runit-scrips , mv_ir: remove loading of lirc_serial by modules.mythvantage, the run script takes care of loading with the correct values.

Add more debugging to remotes log

refs #950

1 files changed, 18 insertions, 7 deletions

diff --git a/abs/core/runit-scripts/runitscripts/services/remotes/run b/abs/core/runit-scripts/runitscripts/services/remotes/run
index 4040d7e..2363a3a 100755
--- a/abs/core/runit-scripts/runitscripts/services/remotes/run
+++ b/abs/core/runit-scripts/runitscripts/services/remotes/run
@@ -14,6 +14,10 @@ fi
 
 echo "`date` --- run started" >> $LOG
 
+echo "====== lirc modules already loaded ==========" >> $LOG
+lsmod |grep lirc >> $LOG
+echo "====== lirc modules end =========" >> $LOG
+echo >> $LOG
 #What is done in this file may not be enough to start your specific remote.
 #If that is true of your remote place your remote startup commands in:
 # /etc/runit/lirc.sh
@@ -47,29 +51,36 @@ else
 
     if [ -n "$serial_port" ]
     then
+        echo "Serial device setup:  $serial_port" >>$LOG
         #/dev/ttyS0 (COM1), port 0x3f8, irq 4
         #/dev/ttyS1 (COM2), port 0x2f8, irq 3
         #/dev/ttyS2 (COM3), port 0x3e8, irq 4
         #/dev/ttyS3 (COM4), port 0x2e8, irq 3
-
+        printhl "   Using serial device, loading module lirc_serial"
         case $serial_port in
         ttyS0)
-               FLAGS="io=0x3f8  irq=4"
+               FLAGS="io=0x3f8  irq=4 debug=1 "
                ;;
         ttyS1)
-               FLAGS="io=0x2f8  irq=3"
+               FLAGS="io=0x2f8  irq=3 debug=1"
                ;;
         ttyS2)
-               FLAGS="io=0x3e8  irq=4"
+                FLAGS="io=0x3e8  irq=4 debug=1"
                ;;
         ttyS3)
-               FLAGS="io=0x2e8  irq=3"
+                FLAGS="io=0x2e8  irq=3 debug=1"
                ;;
         esac
-        /usr/bin/setserial /dev/$serial_port uart none
+        
+        /usr/bin/setserial /dev/$serial_port uart none 2>&1 >> $LOG
         sleep 0.5
-        /sbin/modprobe lirc_serial $FLAGS
+        echo "/sbin/modprobe lirc_serial $FLAGS" 2>&1 >> $LOG
+        /sbin/modprobe lirc_serial $FLAGS 2>&1 >> $LOG
         sleep 0.5
+        echo "====== dmesg output ============" >>$LOG
+        dmesg | tail -10 >> $LOG
+        echo "======= dmesg end ===========" >>$LOG
+        
     fi
 
     if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ]