initial import

1 files changed, 212 insertions, 0 deletions

diff --git a/abs/core/shadow/login.defs b/abs/core/shadow/login.defs
new file mode 100644
index 0000000..9b1fab0
--- /dev/null
+++ b/abs/core/shadow/login.defs
@@ -0,0 +1,212 @@
+#
+# /etc/login.defs - Configuration control definitions for the login package.
+#
+# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
+# If unspecified, some arbitrary (and possibly incorrect) value will
+# be assumed.  All other items are optional - if not specified then
+# the described action or option will be inhibited.
+#
+# Comment lines (lines beginning with "#") and blank lines are ignored.
+#
+# Modified for Linux.  --marekm
+
+#
+# Delay in seconds before being allowed another attempt after a login failure
+#
+FAIL_DELAY		3
+
+#
+# Enable display of unknown usernames when login failures are recorded.
+#
+LOG_UNKFAIL_ENAB	no
+
+#
+# Enable logging of successful logins
+#
+LOG_OK_LOGINS		no
+
+#
+# Enable "syslog" logging of su activity - in addition to sulog file logging.
+# SYSLOG_SG_ENAB does the same for newgrp and sg.
+#
+SYSLOG_SU_ENAB		yes
+SYSLOG_SG_ENAB		yes
+
+#
+# If defined, either full pathname of a file containing device names or
+# a ":" delimited list of device names.  Root logins will be allowed only
+# upon these devices.
+#
+CONSOLE		/etc/securetty
+#CONSOLE	console:tty01:tty02:tty03:tty04
+
+#
+# If defined, all su activity is logged to this file.
+#
+#SULOG_FILE	/var/log/sulog
+
+#
+# If defined, file which maps tty line to TERM environment parameter.
+# Each line of the file is in a format something like "vt100  tty01".
+#
+#TTYTYPE_FILE	/etc/ttytype
+
+#
+# If defined, the command name to display when running "su -".  For
+# example, if this is defined as "su" then a "ps" will display the
+# command is "-su".  If not defined, then "ps" would display the
+# name of the shell actually being run, e.g. something like "-sh".
+#
+SU_NAME		su
+
+#
+# *REQUIRED*
+#   Directory where mailboxes reside, _or_ name of file, relative to the
+#   home directory.  If you _do_ define both, MAIL_DIR takes precedence.
+#   QMAIL_DIR is for Qmail
+#
+#QMAIL_DIR	Maildir
+MAIL_DIR	/var/spool/mail
+
+#
+# If defined, file which inhibits all the usual chatter during the login
+# sequence.  If a full pathname, then hushed mode will be enabled if the
+# user's name or shell are found in the file.  If not a full pathname, then
+# hushed mode will be enabled if the file exists in the user's home directory.
+#
+HUSHLOGIN_FILE	.hushlogin
+#HUSHLOGIN_FILE	/etc/hushlogins
+
+#
+# *REQUIRED*  The default PATH settings, for superuser and normal users.
+#
+# (they are minimal, add the rest in the shell startup files)
+ENV_SUPATH	PATH=/sbin:/bin:/usr/sbin:/usr/bin
+ENV_PATH	PATH=/bin:/usr/bin
+
+#
+# Terminal permissions
+#
+#	TTYGROUP	Login tty will be assigned this group ownership.
+#	TTYPERM		Login tty will be set to this permission.
+#
+# If you have a "write" program which is "setgid" to a special group
+# which owns the terminals, define TTYGROUP to the group number and
+# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
+# TTYPERM to either 622 or 600.
+#
+TTYGROUP	tty
+TTYPERM		0600
+
+#
+# Login configuration initializations:
+#
+#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
+#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
+#	UMASK		Default "umask" value.
+#
+# The ERASECHAR and KILLCHAR are used only on System V machines.
+# The ULIMIT is used only if the system supports it.
+# (now it works with setrlimit too; ulimit is in 512-byte units)
+#
+# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+#
+ERASECHAR	0177
+KILLCHAR	025
+UMASK		077
+
+#
+# Password aging controls:
+#
+#	PASS_MAX_DAYS	Maximum number of days a password may be used.
+#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
+#	PASS_WARN_AGE	Number of days warning given before a password expires.
+#
+PASS_MAX_DAYS	99999
+PASS_MIN_DAYS	0
+PASS_WARN_AGE	7
+
+#
+# Min/max values for automatic uid selection in useradd
+#
+UID_MIN			 1000
+UID_MAX			60000
+
+#
+# Min/max values for automatic gid selection in groupadd
+#
+GID_MIN			  100
+GID_MAX			60000
+
+#
+# Max number of login retries if password is bad
+#
+LOGIN_RETRIES		5
+
+#
+# Max time in seconds for login
+#
+LOGIN_TIMEOUT		60
+
+#
+# Which fields may be changed by regular users using chfn - use
+# any combination of letters "frwh" (full name, room number, work
+# phone, home phone).  If not defined, no changes are allowed.
+# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
+# 
+CHFN_RESTRICT		rwh
+
+#
+# List of groups to add to the user's supplementary group set
+# when logging in on the console (as determined by the CONSOLE
+# setting).  Default is none.
+#
+# Use with caution - it is possible for users to gain permanent
+# access to these groups, even when not logged in on the console.
+# How to do it is left as an exercise for the reader...
+#
+#CONSOLE_GROUPS		floppy:audio:cdrom
+
+#
+# Should login be allowed if we can't cd to the home directory?
+# Default in no.
+#
+DEFAULT_HOME	yes
+
+#
+# If defined, this command is run when removing a user.
+# It should remove any at/cron/print jobs etc. owned by
+# the user to be removed (passed as the first argument).
+#
+#USERDEL_CMD	/usr/sbin/userdel_local
+
+#
+# When prompting for password without echo, getpass() can optionally
+# display a random number (in the range 1 to GETPASS_ASTERISKS) of '*'
+# characters for each character typed.  This feature is designed to
+# confuse people looking over your shoulder when you enter a password :-).
+# Also, the new getpass() accepts both Backspace (8) and Delete (127)
+# keys to delete previous character (to cope with different terminal
+# types), Control-U to delete all characters, and beeps when there are
+# no more characters to delete, or too many characters entered.
+#
+# Setting GETPASS_ASTERISKS to 1 results in more traditional behaviour -
+# exactly one '*' displayed for each character typed.
+#
+# Setting GETPASS_ASTERISKS to 0 disables the '*' characters (Backspace,
+# Delete, Control-U and beep continue to work as described above).
+#
+# Setting GETPASS_ASTERISKS to -1 reverts to the traditional getpass()
+# without any new features.  This is the default.
+#
+#GETPASS_ASTERISKS 1
+
+#
+# Enable setting of the umask group bits to be the same as owner bits
+# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+# the same as gid, and username is the same as the primary group name.
+#
+# This also enables userdel to remove user groups if no members exist.
+#
+USERGROUPS_ENAB yes
+