initial import

15 files changed, 1607 insertions, 0 deletions

diff --git a/abs/core/udev/00-load-blacklist.rules b/abs/core/udev/00-load-blacklist.rules
new file mode 100644
index 0000000..b1a5faf
--- /dev/null
+++ b/abs/core/udev/00-load-blacklist.rules
@@ -0,0 +1 @@
+IMPORT{program} = "/lib/udev/mod-blacklist.sh"
diff --git a/abs/core/udev/51-arch.rules b/abs/core/udev/51-arch.rules
new file mode 100644
index 0000000..b06be93
--- /dev/null
+++ b/abs/core/udev/51-arch.rules
@@ -0,0 +1,191 @@
+# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
+# do not edit this file, it will be overwritten on update
+#
+# This ruleset should provide a DevFS-compatible device tree.
+#
+# There are a number of modifiers that are allowed to be used in some
+# of the different fields. They provide the following subsitutions:
+#
+# %n the "kernel number" of the device.
+#    For example, 'sda3' has a "kernel number" of '3'
+# %k the kernel name for the device.
+# %M the kernel major number for the device
+# %m the kernel minor number for the device
+# %b the bus id for the device
+# %c the string returned by the PROGRAM
+# %s{filename} the content of a sysfs attribute.
+# %% the '%' char itself.
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields.  See the udev man page for a full description of them.
+# global stuff
+#
+
+#####################################
+###### Hotplug rules - begin
+#####################################
+# check if the device has already been claimed by a driver
+ACTION!="add", GOTO="drivers_end"
+DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
+
+# SCSI addon modules
+SUBSYSTEM=="scsi", ATTRS{type}=="[07]", RUN+="/lib/udev/load-modules.sh sd_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="14", RUN+="/lib/udev/load-modules.sh sd_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sr_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}!="ADR*", RUN+="/lib/udev/load-modules.sh osst"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}=="ADR*", RUN+="/lib/udev/load-modules.sh st"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}!="Onstream", RUN+="/lib/udev/load-modules.sh st"
+
+# SOUND addon modules
+SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-pcm-oss"
+SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
+
+#PNP addon modules
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc_cmos"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
+
+# PARPORT addon modules
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh ppdev"
+
+# fix ide cdrom detection on old proliant servers
+SUBSYSTEM=="pci", ENV{MODALIAS}=="pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00", RUN+="/lib/udev/load-modules.sh ide-generic"
+
+LABEL="drivers_end"
+#####################################
+##### Hotplug rules - end
+#####################################
+
+#####################################
+###### CD/DVD symlinks - begin
+#####################################
+ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="sr[0-9]*", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="scd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
+ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
+ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
+ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
+ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="cdsymlinks.sh"
+ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="cdsymlinks.sh"
+#####################################
+###### CD/DVD symlinks - end
+#####################################
+
+#####################################
+# Permissions and Symlinks - begin
+#####################################
+# fix /dev/root symlink
+SUBSYSTEM=="block", RUN+="root-link.sh"
+
+# permissions for IDE CD devices
+SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
+
+# permissions for SCSI CD devices
+SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROUP="optical"
+SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
+
+# permissions for removable devices like cardreaders or sticks
+KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
+
+# permissions for firewire external drives
+KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
+
+# permissions for usb to scsi external adapters
+KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="7", GROUP="storage"
+
+# permissions for ide storage like pcmcia card readers
+ACTION!="add", GOTO="pcmcia_end"
+SUBSYSTEM!="block", GOTO="pcmcia_end"
+KERNEL=="hd*[!0-9]", IMPORT{program}="ata_id --export $tempnode"
+KERNEL=="hd*", IMPORT{parent}=="ID_*"
+KERNEL=="hd*", ENV{ID_TYPE}=="generic", GROUP="storage"
+LABEL="pcmcia_end"
+
+# permissions for SCSI scanners
+SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
+
+# md block devices
+KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
+
+# video devices
+SUBSYSTEM=="video4linux", GROUP="video"
+### xorg resets those permissions, adjust your xorg.conf!
+KERNEL=="nvidia*",	GROUP="video"
+KERNEL=="3dfx*",	GROUP="video"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
+
+# loop devices
+KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
+
+# misc
+KERNEL=="nvram",   NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
+KERNEL=="psaux",   NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="uinput",  NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="sgi_fetchop",   MODE="0666"
+KERNEL=="sonypi",        MODE="0666"
+KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# sound devices
+# alsa devices
+SUBSYSTEM=="sound",	GROUP="audio"
+KERNEL=="controlC[0-9]*", NAME="snd/%k"
+KERNEL=="hw[CD0-9]*",     NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*",  NAME="snd/%k"
+KERNEL=="midi[CD0-9]*",   NAME="snd/%k"
+KERNEL=="timer",          NAME="snd/%k"
+KERNEL=="seq",            NAME="snd/%k"
+# oss devices
+KERNEL=="audio*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="dmmidi*",    NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="admmidi*",   NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="dsp*",       NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="adsp*",      NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="midi*",      NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="amidi*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="mixer*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
+
+# USB devices
+KERNEL=="hiddev*",	NAME="usb/%k"
+KERNEL=="legousbtower*",	NAME="usb/%k", MODE="0666"
+KERNEL=="dabusb*",	NAME="usb/%k"
+
+# netlink devices
+KERNEL=="route",		NAME="netlink/%k"
+KERNEL=="skip",		NAME="netlink/%k"
+KERNEL=="usersock",	NAME="netlink/%k"
+KERNEL=="fwmonitor",	NAME="netlink/%k"
+KERNEL=="tcpdiag",	NAME="netlink/%k"
+KERNEL=="nflog",		NAME="netlink/%k"
+KERNEL=="xfrm",		NAME="netlink/%k"
+KERNEL=="arpd",		NAME="netlink/%k"
+KERNEL=="route6",	NAME="netlink/%k"
+KERNEL=="ip6_fw",	NAME="netlink/%k"
+KERNEL=="dnrtmsg",	NAME="netlink/%k"
+### ! disabled seems to break device creation !
+# KERNEL=="tap*",		NAME="netlink/%k"
+
+# CAPI devices
+KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20", GROUP="uucp"
+KERNEL=="capi*",	NAME="capi/%n", GROUP="uucp"
+
+# IEEE1394 (firewire) devices
+KERNEL=="raw1394", NAME="%k", GROUP="video"
+
+# kbd devices
+KERNEL=="kbd",		MODE="0664"
+
+#######################################
+# Permissions and Symlinks - end
+#######################################
diff --git a/abs/core/udev/PKGBUILD b/abs/core/udev/PKGBUILD
new file mode 100644
index 0000000..7c71a08
--- /dev/null
+++ b/abs/core/udev/PKGBUILD
@@ -0,0 +1,82 @@
+# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $
+# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
+# Maintainer: Thomas Bächler <thomas@archlinux.org>
+pkgname=udev
+pkgver=119
+pkgrel=10
+pkgdesc="The userspace dev tools (udev)"
+arch=(i686 x86_64)
+url="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+license=('GPL')
+groups=('base')
+depends=('glibc' 'coreutils' 'util-linux')
+install=udev.install
+backup=(etc/udev/udev.conf
+        etc/scsi_id.config
+        etc/udev/cdsymlinks.conf
+        etc/modprobe.d/framebuffer_blacklist)
+conflicts=('pcmcia-cs' 'hotplug')
+replaces=('devfsd')
+options=(!makeflags)
+source=(http://www.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.bz2
+        migrate-udev start_udev 51-arch.rules load-modules.sh 
+        cdrom-rules.patch cdsymlinks.sh root-link.sh readme-udev-arch.txt arch-udev-rules.patch)
+md5sums=('dd299c16371c9e14e52d79744bccf4c0'
+         '49434a593918c822077bc3af765f1aff'
+         'a68a519d1ed8cbbd2f45c23eb32ea218'
+         '082e76ef9053495a5cade321817467cd'
+         '945f6d30ab458189b3c17f8e6722da1f'
+         '5de33ba31ce52ab4da47fe3ddd3c19ea'
+         '8424b78e9dd772e75b4ef90814807815'
+         '2d6dc6842464f107bccc68cd505a6c31'
+         '780db5316a762dc5cdcf52027ab8a8eb'
+         'fab7fa68aa35f0595c0b2bd88c4dbfd9')
+
+build() {
+  cd $startdir/src/$pkgname-$pkgver
+  make || return 1
+  make INSTALL=/bin/install DESTDIR=$startdir/pkg install \
+    EXTRAS="extras/ata_id extras/cdrom_id extras/edd_id extras/firmware extras/floppy extras/scsi_id extras/usb_id extras/volume_id extras/path_id extras/rule_generator"
+
+  install -D -m755 extras/path_id/path_id $startdir/pkg/sbin/path_id
+  install -D -m755 $startdir/src/start_udev $startdir/pkg/etc/start_udev
+  install -D -m755 $startdir/src/migrate-udev $startdir/pkg/sbin/migrate-udev
+  install -D -m644 $startdir/src/51-arch.rules $startdir/pkg/etc/udev/rules.d/51-arch.rules
+  # install our module loading subsystem
+  install -D -m755 $startdir/src/load-modules.sh $startdir/pkg/lib/udev/load-modules.sh
+  # install cdsymlinks.sh
+  install -D -m755 $startdir/src/cdsymlinks.sh $startdir/pkg/lib/udev/cdsymlinks.sh
+  # install root-link.sh
+  install -D -m755 $startdir/src/root-link.sh $startdir/pkg/lib/udev/root-link.sh
+  # install instructions
+  install -D -m644 $startdir/src/readme-udev-arch.txt $startdir/pkg/etc/udev/readme-udev-arch.txt
+  # add devices dir
+  mkdir $startdir/pkg/lib/udev/devices
+  # disable error loggin to prevent startup failures printed to vc on boot
+  sed -i -e 's|udev_log="err"|udev_log="0"|g' $startdir/pkg/etc/udev/udev.conf
+  # install additional rules files
+  install -D -m 644 $startdir/src/$pkgname-$pkgver/etc/udev/packages/40-pilot-links.rules $startdir/pkg/etc/udev/rules.d/
+  install -D -m 644 $startdir/src/$pkgname-$pkgver/etc/udev/packages/64-device-mapper.rules $startdir/pkg/etc/udev/rules.d/
+  install -D -m 644 $startdir/src/$pkgname-$pkgver/etc/udev/packages/64-md-raid.rules $startdir/pkg/etc/udev/rules.d/
+  # fix 60-cdrom_id.rules
+  cd $startdir/pkg/etc/udev/rules.d/
+  patch -Np0 -i $startdir/src/cdrom-rules.patch || return 1
+  # fix standard udev rules to fit to arch
+  patch -Np0 -i $startdir/src/arch-udev-rules.patch || return 1
+  # fix program paths in rules files
+  for i in vol_id cdrom_id ata_id scsi_id path_id edd_id usb_id; do
+	sed -i -e "s#$i#/lib/udev/$i#g" $startdir/pkg/etc/udev/rules.d/*
+  done
+  # fix modprobe rules to use the load-modules.sh
+  sed -i -e "s#/sbin/modprobe#/lib/udev/load-modules.sh#g" $startdir/pkg/etc/udev/rules.d/*
+  # disable persistent cdromsymlinks and network by default
+  mv $startdir/pkg/etc/udev/rules.d/75-persistent-net-generator.rules \
+     $startdir/pkg/etc/udev/rules.d/75-persistent-net-generator.rules.optional
+  mv $startdir/pkg/etc/udev/rules.d/75-cd-aliases-generator.rules \
+     $startdir/pkg/etc/udev/rules.d/75-cd-aliases-generator.rules.optional
+  # create framebuffer blacklist
+  mkdir -p $startdir/pkg/etc/modprobe.d/
+  for mod in $(find /lib/modules/ -name '*fb*.ko' -exec basename {} .ko \;); do 
+	echo "blacklist $mod" >> $startdir/pkg/etc/modprobe.d/framebuffer_blacklist
+  done
+}
diff --git a/abs/core/udev/arch-udev-rules.patch b/abs/core/udev/arch-udev-rules.patch
new file mode 100644
index 0000000..fc5ede0
--- /dev/null
+++ b/abs/core/udev/arch-udev-rules.patch
@@ -0,0 +1,151 @@
+--- 50-udev-default.rules.old	2008-03-09 17:52:59.000000000 +0100
++++ 50-udev-default.rules	2008-03-09 17:09:50.000000000 +0100
+@@ -4,12 +4,17 @@
+ KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660", OPTIONS="last_rule"
+ KERNEL=="ptmx",			GROUP="tty", MODE="0666", OPTIONS="last_rule"
+ KERNEL=="tty",			GROUP="tty", MODE="0666", OPTIONS="last_rule"
+-KERNEL=="tty[0-9]*",		GROUP="tty", MODE="0620", OPTIONS="last_rule"
+-KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty", OPTIONS="last_rule"
++KERNEL=="tty[0-9]*",		GROUP="tty", MODE="0620", NAME="vc/%n", SYMLINK+="%k" OPTIONS="last_rule"
++KERNEL=="vcs",        GROUP="tty", NAME="vcc/0", OPTIONS="last_rule"
++KERNEL=="vcs[0-9]*",  GROUP="tty", NAME="vcc/%n", OPTIONS="last_rule"
++KERNEL=="vcsa",       GROUP="tty", NAME="vcc/a0", OPTIONS="last_rule"
++KERNEL=="vcsa[0-9]*", GROUP="tty", NAME="vcc/a%n", OPTIONS="last_rule"
+ KERNEL=="console",		MODE="0600", OPTIONS="last_rule"
+ 
+ # serial
+ KERNEL=="tty[A-Z]*|pppox*|ircomm*|noz*", GROUP="uucp"
++KERNEL=="ttyS[0-9]*",   NAME="tts/%n", SYMLINK+="ttyS%n"
++KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
+ KERNEL=="ppp",			MODE="0600", OPTIONS+="ignore_remove"
+ KERNEL=="mwave",		NAME="modems/mwave", GROUP="uucp"
+ KERNEL=="hvc*|hvsi*",		GROUP="uucp"
+@@ -20,8 +25,7 @@
+ KERNEL=="null|zero|full|random|urandom", MODE="0666"
+ KERNEL=="null",			SYMLINK+="XOR"
+ KERNEL=="mem|kmem|port",	GROUP="kmem", MODE="0640"
+-KERNEL=="ram0",			SYMLINK+="ramdisk"
+-KERNEL=="ram1",			SYMLINK+="ram"
++KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
+ 
+ # input
+ KERNEL=="mouse*|mice|event*",	NAME="input/%k", MODE="0640"
+@@ -30,23 +34,30 @@
+ 
+ # video4linux
+ KERNEL=="vbi0",			SYMLINK+="vbi"
++KERNEL=="vbi[0-9]*",   NAME="v4l/vbi%n", SYMLINK+="%k", GROUP="video"
+ KERNEL=="radio0",		SYMLINK+="radio"
++KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+ KERNEL=="video0",		SYMLINK+="video"
++KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k", GROUP="video"
++KERNEL=="vtx0", SYMLINK+="vtx"
++KERNEL=="vtx[0-9]*",   NAME="v4l/vtx%n", SYMLINK+="%k", GROUP="video"
+ 
+ # graphics
+-KERNEL=="agpgart",		MODE="0600"
+-KERNEL=="card[0-9]*",		NAME="dri/%k", MODE="0666"
++### xorg resets those permissions, adjust your xorg.conf!
++KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k", GROUP="video", MODE="0600"
++KERNEL=="card[0-9]*",		NAME="dri/%k", GROUP="video", MODE="0666"
++KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+ KERNEL=="fb0",			SYMLINK+="fb"
+ 
+ # DVB video
+-SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c"
++SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+ 
+ # Firewire
+-KERNEL=="dv1394*",		SYMLINK+="dv1394/%n"
+-KERNEL=="video1394*",		NAME="video1394/%n"
++KERNEL=="dv1394*",		SYMLINK+="dv1394/%n", GROUP="video"
++KERNEL=="video1394*",		NAME="video1394/%n", GROUP="video"
+ 
+ # firmware class requests
+-SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
++SUBSYSTEM=="firmware", ACTION=="add", ENV{FIRMWARE}=="?*", RUN+="firmware.sh"
+ 
+ # libusb device nodes
+ SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644"
+@@ -59,23 +70,20 @@
+ KERNEL=="irlpt[0-9]*",		GROUP="lp"
+ 
+ # block, tapes, block-releated
+-SUBSYSTEM=="block", GROUP="disk", MODE="0640"
+-SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n"
++SUBSYSTEM=="block", GROUP="disk"
+ SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
+ SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
+-KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions"
+-KERNEL=="fd[0-9]",		GROUP="floppy"
+-KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0640 -G floppy $root/%k"
++KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions", GROUP="floppy"
++KERNEL=="fd[0-9]*", NAME="fd%n", SYMLINK+="floppy/%n fd%nu1440 fd%nu720 fd%nh1200 fd%nu360", GROUP="floppy"
+ KERNEL=="sch[0-9]*",		GROUP="disk"
+-KERNEL=="sg[0-9]*",		ATTRS{type}!="3|6", GROUP="disk", MODE="0640"
+ KERNEL=="ht[0-9]*|nht[0-9]*",	GROUP="disk"
+ KERNEL=="pg[0-9]*",		GROUP="disk"
+ KERNEL=="pt[0-9]*|npt[0-9]*",	GROUP="disk"
+ KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
+ KERNEL=="rawctl",		NAME="raw/%k", GROUP="disk"
+ SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
+-KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/%k"
+-KERNEL=="pktcdvd",		NAME="pktcdvd/control"
++KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/%k",  GROUP="optical", MODE="0660"
++KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="optical", MODE="0660"
+ KERNEL=="qft0",			SYMLINK+="ftape"
+ SUBSYSTEM=="bsg",		NAME="bsg/%k"
+ SUBSYSTEM=="aoe",		NAME="etherd/%k", GROUP="disk"
+@@ -84,13 +92,13 @@
+ KERNEL=="tun",			NAME="net/%k", MODE="0666", OPTIONS+="ignore_remove"
+ 
+ # CPU
+-KERNEL=="cpu[0-9]*",		NAME="cpu/%n/cpuid"
+-KERNEL=="msr[0-9]*",		NAME="cpu/%n/msr"
++KERNEL=="cpu[0-9]*",		NAME="cpu/%n/cpuid", SYMLINK="%k"
++KERNEL=="msr[0-9]*",		NAME="cpu/%n/msr", SYMLINK="%k"
+ KERNEL=="microcode",		NAME="cpu/microcode", MODE="0600"
+ 
+ # miscellaneous
+ KERNEL=="fuse",			MODE="0666"
+-KERNEL=="rtc|rtc0",		MODE="0644"
++KERNEL=="rtc*",     NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
+ KERNEL=="rtc0",			SYMLINK+="rtc"
+ KERNEL=="auer[0-9]*",		NAME="usb/%k"
+ KERNEL=="hw_random",		NAME="hwrng", SYMLINK+="%k"
+--- 60-persistent-storage.rules.old	2008-03-09 17:52:59.000000000 +0100
++++ 60-persistent-storage.rules	2008-03-09 15:05:13.000000000 +0100
+@@ -3,11 +3,13 @@
+ # persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
+ # scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
+ 
+-ACTION!="add|change", GOTO="persistent_storage_end"
++# needed like this!!!
++ACTION!="add|change", GOTO="persistent_storage_end"
+ SUBSYSTEM!="block", GOTO="persistent_storage_end"
+ 
+ # skip rules for inappropriate block devices
+-KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|dm-*|md*", GOTO="persistent_storage_end"
++# don't add dm-*!!!
++KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*", GOTO="persistent_storage_end"
+ 
+ # never access non-cdrom removable ide devices, the drivers are causing event loops on open()
+ KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
+--- 80-drivers.rules~	2008-03-15 00:05:02.000000000 +0100
++++ 80-drivers.rules	2008-03-21 21:44:28.000000000 +0100
+@@ -3,10 +3,11 @@
+ ACTION!="add", GOTO="drivers_end"
+ 
+ DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/sbin/modprobe $env{MODALIAS}"
+-SUBSYSTEM=="pnp", DRIVER!="?*", ENV{MODALIAS}!="?*", \
+-  RUN{ignore_error}+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
+-SUBSYSTEM=="tifm", RUN+="/sbin/modprobe --all tifm_sd tifm_ms"
+-SUBSYSTEM=="memstick", RUN+="/sbin/modprobe --all ms_block mspro_block"
++SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", DRIVER!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/load-modules.sh pnp:d$$id; /lib/udev/load-modules.sh pnp:c$$id ; done < /sys$devpath/id'"
++SUBSYSTEM=="tifm", RUN+="/sbin/modprobe tifm_sd"
++SUBSYSTEM=="tifm", RUN+="/sbin/modprobe tifm_ms"
++SUBSYSTEM=="memstick", RUN+="/sbin/modprobe ms_block"
++SUBSYSTEM=="memstick", RUN+="/sbin/modprobe mspro_block"
+ SUBSYSTEM=="mmc", RUN+="/sbin/modprobe mmc_block"
+ SUBSYSTEM=="i2o", RUN+="/sbin/modprobe i2o_block"
+ SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/sbin/modprobe ide-scsi"
diff --git a/abs/core/udev/cdrom-rules.patch b/abs/core/udev/cdrom-rules.patch
new file mode 100644
index 0000000..9b3518a
--- /dev/null
+++ b/abs/core/udev/cdrom-rules.patch
@@ -0,0 +1,8 @@
+--- 60-cdrom_id.rules.old	2006-09-07 09:57:04.000000000 +0200
++++ 60-cdrom_id.rules	2006-09-07 11:29:31.000000000 +0200
+@@ -1,3 +1,4 @@
+ # import optical drive properties
+ 
+-KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", IMPORT{program}="cdrom_id --export $tempnode"
++KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", IMPORT{program}="cdrom_id --export $tempnode"
++KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", IMPORT{program}="path_id %p"
diff --git a/abs/core/udev/cdsymlinks.sh b/abs/core/udev/cdsymlinks.sh
new file mode 100755
index 0000000..c4185ac
--- /dev/null
+++ b/abs/core/udev/cdsymlinks.sh
@@ -0,0 +1,45 @@
+#! /bin/sh
+# Creates cdsymlinks in /dev
+# for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
+if [ -d /dev/cd ]; then
+	rm /dev/cdrom*
+	rm /dev/cdrw*
+	rm /dev/dvd*
+	rm /dev/dvdrw*
+	for i in /dev/cd/cdrom-*; do
+		if [ -h $i ]; then
+		[ "$CD_NUMBER" = "" ] && ln -s $i /dev/cdrom
+		[ "$CD_NUMBER" = "" ] && CD_NUMBER="-1"
+		! [ "$CD_NUMBER" = "" ] && CD_NUMBER="$((CD_NUMBER+1))" && ln -s $i /dev/cdrom$CD_NUMBER
+		fi
+	done
+	
+	for i in /dev/cd/cdrw-*; do
+		if [ -h $i ]; then
+		[ "$CDRW_NUMBER" = "" ] && ln -s $i /dev/cdrw
+		[ "$CDRW_NUMBER" = "" ] && CDRW_NUMBER="-1"
+		! [ "$CDRW_NUMBER" = "" ] && CDRW_NUMBER="$((CDRW_NUMBER+1))" && ln -s $i /dev/cdrw$CDRW_NUMBER
+		fi
+	done
+
+	for i in /dev/cd/dvd-*; do
+		if [ -h $i ]; then
+		[ "$DVD_NUMBER" = "" ] && ln -s $i /dev/dvd
+		[ "$DVD_NUMBER" = "" ] && DVD_NUMBER="-1"
+		! [ "$DVD_NUMBER" = "" ] && DVD_NUMBER="$((DVD_NUMBER+1))" && ln -s $i /dev/dvd$DVD_NUMBER
+		fi
+	done
+
+	for i in /dev/cd/dvdrw-*; do
+		if [ -h $i ]; then
+		[ "$DVDRW_NUMBER" = "" ] && ln -s $i /dev/dvdrw
+		[ "$DVDRW_NUMBER" = "" ] && DVDRW_NUMBER="-1"
+		! [ "$DVDRW_NUMBER" = "" ] && DVDRW_NUMBER="$((DVDRW_NUMBER+1))" && ln -s $i /dev/dvdrw$DVDRW_NUMBER
+		fi
+	done
+else
+	rm /dev/cdrom*
+	rm /dev/cdrw*
+	rm /dev/dvd*
+	rm /dev/dvdrw*
+fi
diff --git a/abs/core/udev/load-modules.sh b/abs/core/udev/load-modules.sh
new file mode 100755
index 0000000..861b942
--- /dev/null
+++ b/abs/core/udev/load-modules.sh
@@ -0,0 +1,60 @@
+#! /bin/bash
+# Implement blacklisting for udev-loaded modules
+
+[ $# -ne 1 ] && exit 1
+
+. /etc/rc.conf
+
+# grab modules from rc.conf
+BLACKLIST="${MOD_BLACKLIST[@]}"
+
+if [ -f /proc/cmdline ]; then 
+    for cmd in $(cat /proc/cmdline); do
+        case $cmd in
+            *=*) eval $cmd ;;
+        esac
+    done
+    #parse cmdline entries of the form "disablemodules=x,y,z"
+    if [ -n "$disablemodules" ]; then
+        BLACKLIST="$BLACKLIST $(echo $disablemodules | sed 's|,| |g')"
+    fi
+    if [ "$load_modules" == "off" ]; then
+        MOD_AUTOLOAD="no"
+    fi
+fi
+
+#MODULES entries in rc.conf that begin with ! are blacklisted
+for mod in ${MODULES[@]}; do
+    if [ "${mod}" != "${mod#!}" ]; then
+        BLACKLIST="$BLACKLIST ${mod#!}"
+    fi
+done
+
+
+if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
+    if [ -n "$BLACKLIST" ]; then 
+        depmods="$(/sbin/modprobe -i --show-depends $1)"
+        if [ $? -ne 0 ]; then
+            /usr/bin/logger -p info "cannot find module $1"
+            exit 1
+        fi
+
+        #sanitize our module names
+        depmods="$(echo "$depmods" | sed \
+            -e "s#^insmod /lib.*/\(.*\)\.ko.*#\1#g" \
+            -e 's|-|_|g')"
+
+        for mod in $depmods; do
+            if echo $BLACKLIST | /bin/grep "\<$mod\>" 2>&1 >/dev/null; then
+                /usr/bin/logger -p info "udev load-modules: $1 is blacklisted"
+                exit 1
+            fi
+        done
+    fi
+    /sbin/modprobe $1
+else
+    #/usr/bin/logger -p info \
+    echo \
+    "udev load-modules: autoloading is disabled, not loading $1"
+fi
+# vim: set et ts=4:
diff --git a/abs/core/udev/migrate-udev b/abs/core/udev/migrate-udev
new file mode 100644
index 0000000..a7a24c9
--- /dev/null
+++ b/abs/core/udev/migrate-udev
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+# This script will create static system-critical device nodes in your /dev
+# tree so the initscripts can get by without devfs/udev long enough to start
+# up devfs/udev.
+
+STARTDIR=`pwd`
+TMPDIR=`mktemp -d`
+ROOT=/
+[ "$1" != "" ] && ROOT=$1
+
+mount --bind $ROOT $TMPDIR
+cd $TMPDIR
+
+echo -n "creating device nodes: "
+rm -f dev/console
+rm -f dev/null
+rm -f dev/zero
+mknod dev/console c 5 1
+echo -n "console "
+mknod -m 666 dev/null c 1 3
+echo -n "null "
+mknod -m 666 dev/zero c 1 5 
+echo -n "zero "
+echo
+
+cd $STARTDIR
+umount $TMPDIR
+rm -rf $TMPDIR
diff --git a/abs/core/udev/mod-blacklist.sh b/abs/core/udev/mod-blacklist.sh
new file mode 100755
index 0000000..264192a
--- /dev/null
+++ b/abs/core/udev/mod-blacklist.sh
@@ -0,0 +1,47 @@
+#! /bin/bash
+# Export a combined blacklist of all modules
+# for use by the load-modules script
+# 
+# NOTE: we only need bash because of rc.conf, but this
+# is a one-time use script, so we're good
+
+. /etc/rc.conf
+
+# grab modules from rc.conf
+BLACKLIST="${MOD_BLACKLIST[@]}"
+
+if [ -f /proc/cmdline ]; then 
+    for cmd in $(cat /proc/cmdline); do
+        case $cmd in
+            *=*) eval $cmd ;;
+        esac
+    done
+    #parse cmdline entries of the form "disablemodules=x,y,z"
+    if [ -n "$disablemodules" ]; then
+        BLACKLIST="$BLACKLIST $(echo $disablemodules | sed 's|,| |g')"
+    fi
+    if [ "$load_modules" == "off" ]; then
+        MOD_AUTOLOAD="no"
+    fi
+fi
+
+# blacklist framebuffer modules
+DRIVER_DIR="/lib/modules/$(uname -r)/kernel/drivers/"
+for x in $DRIVER_DIR/video/*/*fb*; do
+	BLACKLIST="$BLACKLIST $(basename $x .ko)"
+done
+for x in $DRIVER_DIR/video/*fb*; do
+	BLACKLIST="$BLACKLIST $(basename $x .ko)"
+done
+
+#MODULES entries in rc.conf that begin with ! are blacklisted
+for mod in ${MODULES[@]}; do
+    if [ "${mod}" != "${mod#!}" ]; then
+        BLACKLIST="$BLACKLIST ${mod#!}"
+    fi
+done
+
+echo "MOD_AUTOLOAD=\"$MOD_AUTOLOAD\""
+echo "BLACKLIST=\"$BLACKLIST\""
+
+# vim: set et ts=4:
diff --git a/abs/core/udev/readme-udev-arch.txt b/abs/core/udev/readme-udev-arch.txt
new file mode 100644
index 0000000..ac4a693
--- /dev/null
+++ b/abs/core/udev/readme-udev-arch.txt
@@ -0,0 +1,264 @@
+==========================
+Cold/Hotplugging with Udev
+==========================
+Version 1.1.5
+written by Tobias Powalowski <tpowa@archlinux.org>
+
+---------------
+* Requirements:
+---------------
+- recommended kernel >=2.6.18 for this udev to work properly.
+- No more DevFS device paths!  If you have them, update /etc/fstab:
+  /dev/discs/... etc. has been deprecated in favor of the old style:
+    /dev/discs/disc0/part1 -> /dev/hda1
+    /dev/discs/disc1/part2 -> /dev/hdb2
+- /etc/modprobe.conf should be cleaned from old install entries (see below).
+
+---------------
+* Udev Changes:
+---------------
+- The syntax of udev rules has been changed in >=098 release, please update your rules.
+  --- Snip Changelog Udev 098
+  Renaming of some key names:
+  BUS -> SUBSYSTEMS 
+  ID -> KERNELS
+  SYSFS -> ATTRS 
+  DRIVER -> DRIVERS
+  ATTR{file}="value" can be used now, to write to a sysfs file of the
+  event device. Instead of:
+    ..., SYSFS{type}=="0|7|14", RUN+="/bin/sh -c 'echo 60 > /sys$$DEVPATH/timeout'"
+  we now can do:
+    ..., ATTR{type}=="0|7|14", ATTR{timeout}="60"
+  All the PHYSDEV* keys are deprecated and will be removed from a
+  future kernel:
+    PHYDEVPATH -    is the path of a parent device and should not be
+                    needed at all.
+    PHYSDEVBUS -    is just a SUBSYSTEM value of a parent, and can be
+                    matched with SUBSYSTEMS==
+    PHYSDEVDRIVER - for bus devices it is available as ENV{DRIVER}.
+                    Newer kernels will have DRIVER in the environment,
+                    for older kernels udev puts in. Class device will
+                    no longer carry this property of a parent and
+                    DRIVERS== can be used to match such a parent value.
+  Note that ENV{DRIVER} is only available for a few bus devices, where
+  the driver is already bound at device event time. On coldplug, the
+  events for a lot devices are already bound to a driver, and they will have
+  that value set. But on hotplug, at the time the kernel creates the device,
+  it can't know what driver may claim the device after that, therefore
+  in most cases it will be empty.
+  --- snap Changelog Udev 098
+- optional udev >= 099 Persistent rules generator for network and cd/dvd devices was added.
+
+---------------
+* How it works:
+---------------
+- Udev replaces the functionality of hotplug and hwdetect scripts.
+- Udev does autoloading of modules and coldplugging.
+- Udev loads the modules simultaneously, which is much faster, 
+  but can cause some troubles with multiple network/sound/etc devices
+  (see below).
+- To reload your rules please use /etc/start_udev.
+
+======================
+* Autoloading modules:
+======================
+
+-------------------------------------------------------------------------
+* Module autoloading is controlled by MOD_AUTOLOAD="" in /etc/rc.conf
+-------------------------------------------------------------------------
+MOD_AUTOLOAD="yes" in /etc/rc.conf is necessary: 
+- if you want module autodetection
+- if you want modules be loaded by udev (hotplugging and coldplugging)
+
+MOD_AUTOLOAD="no" is necessary:
+- if you want to load modules strictly using 'modprobe <module>'
+- if you want to load only the modules listed in the MODULES=() array
+  in /etc/rc.conf
+
+---------------
+* Blacklisting:
+---------------
+- means udev will never try to load the module, even if MOD_AUTOLOAD="yes"
+  is set.
+
+You can do this in 2 ways:
+- MOD_BLACKLIST=(moduleA moduleB)
+- MODULES=(!moduleA !moduleB)
+
+Both entries mean the same thing to udev.  MOD_BLACKLIST was used by hwdetect.
+hwdetect does not understand the MODULES= syntax, but it doesn't have to -- it
+is only used in mkinitrd now.
+
+==================================
+* Boot parameter: load_modules=off
+==================================
+
+- No modules are loaded during boot using udev autoloading or the MODULES array
+- Useful for repairing your system if something goes wrong during udev startup
+  and/or during loading modules
+
+==================================
+* Boot parameter: disablemodules=
+==================================
+
+- list modules there that shouldn't be loaded by udev
+- Syntax: disablemodules=module1,module2,module3,...
+- Useful for repairing your system if something goes wrong during udev startup
+  and/or during loading modules and you know the module that causes the trouble.
+
+========================================
+* Persistent CD/DVD symlinks (optional):
+========================================
+
+- To enable this feature copy in /etc/udev/rules.d
+  75-cd-aliases-generator.rules.optinal
+  to 75-cd-aliases-generator.rules
+  Also disable this part in /etc/udev/rules.d/40-arch.rules by putting a # in front:
+  --- snip
+  ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
+  ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
+  ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
+  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
+  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
+  ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
+--- snap
+
+- To get the same device name for CD/DVD symlinks each time you boot,
+  a rule will be generated during bootup or by executing /etc/start_udev.
+- Examples: dvd, cdrom ,cdrw etc.
+- If you want to change those links,
+  modify '/etc/udev/rules.d/70-peristent-cd.rules' to your needs.
+
+Known issues:
+The symlink name is then bound to the hardware pci adress, 
+if you change your CD/DVD device, you have to check the
+/etc/udev/rules.d/70-peristent-net.rules file for correctness.
+
+======================================
+* Persistent Network names (optional):
+======================================
+
+- To enable this feature copy in /etc/udev/rules.d
+  75-persistent-net-generator.rules.optional
+  to 75-persistent-net-generator.rules
+- To get the same network device name each time you boot,
+  a rule will be generated during bootup or by executing /etc/start_udev.
+- Examples: eth0, eth1, wlan0 etc.
+- If you want to change those names, 
+  modify '/etc/udev/rules.d/70-peristent-net.rules' to your needs.
+- NAME= determines the name of your network card. Use these names in your
+  network configuration in rc.conf as well.
+
+Known issues:
+The interface name is then bound to the hardware mac adress, 
+if you change your network card, you have to check the
+/etc/udev/rules.d/70-peristent-net.rules file for correctness.
+
+====================================
+* Known Problems Hardware:
+====================================
+
+- BusLogic devices are broken and will cause a freeze during startup
+Solution:
+This is a kernel bug and no fix has been provided yet.
+
+- PCMCIA Card readers are not treated as removabel devices.
+Solution:
+To get access to them with hal's pmount backend add them to /etc/pmount.allow
+
+====================================
+* Known Problems MOD_AUTOLOAD="yes":
+====================================
+
+-----------------------------------------------------------------------------
+* Sound is not working or modules (eg. parport) are not loaded automatically:
+-----------------------------------------------------------------------------
+Solution:
+- Do you have a clean /etc/modprobe.conf?
+  - A clean /etc/modprobe.conf is empty.  The stock modprobe.conf file
+    contains nothing
+- alsaconf can write output to modprobe.conf. Please keep that in mind.
+
+---------------------------------------------
+* Devices get mixed up eg. Network/Soundcards
+---------------------------------------------
+- Because udev loads all the modules at once, sometimes devices are initialized
+  in different orders (eg. network cards switch eth0 and eth1, sound cards
+  the same)
+
+Solution:
+- Load them in MODULES=() array in the order you need them
+- eg: MODULES=(moduleA moduleB)
+
+Second solution for network:
+- The "proper" way to configure net interfaces to hold static names within
+  udev rules.  Add lines like these to a custom rules file such as
+  /etc/udev/rules.d/01-network.rules:
+    SUBSYSTEM=="net", SYSFS{address}=="aa:bb:cc:dd:ee:ff", NAME="lan0"
+    SUBSYSTEM=="net", SYSFS{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"
+
+- To get the right mac address use this command:
+    udevinfo -a -p /sys/class/net/<yourdevice>
+- Make sure you use lower-case hex values in your udev rules.
+- NAME= determines the name of your network card.  Use these names in your
+  network configuration in rc.conf as well.
+
+Third solution for network:
+- check Persistent Network part
+
+-----------------------------------
+* Network 8139too & 8139cp problem:
+-----------------------------------
+- Both modules have the same kernel entry, which can cause problems.
+Solution:
+- Enter the one you need in MODULES=() and blacklist the other one
+- eg: MODULES=(!8139cp 8139too)
+- The example tells udev to ignore 8139cp module and load 8139too afterwards.
+
+--------------------------------------------------------
+* You need a special loading order to get devices going:
+--------------------------------------------------------
+- Kernel loads modules in wrong order.
+Solution:
+- Load them in the correct order in MODULES=()
+
+-----------------------------
+* Module is not autodetected:
+-----------------------------
+- If your device does not provide a modalias in /sys it cannot be autodetected.
+- If modalias is not combined to a kernel module it cannot be autodetected.
+Known modules that are not autodetected:
+- SCSI CONTROLLER:
+  scsi_transport_sas ultrastor qlogicfas eata BusLogic pas16 wd7000 sym53c416
+  g_NCR5380_mmio fdomain u14-34f dtc initio in2000 imm t128 aha1542 aha152x
+  atp870u g_NCR5380 NCR53c406a qlogicfas408 megaraid_mm advansys
+- NETWORK CARDS:
+  hp ne de4x5 wd cs89x0 eepro smc9194 seeq8005 ni52 ni65 ac3200 smc-ultra 
+  at1700 hp-plus depca eexpress 82596 de600 eth16i de620 lance ewrk3 e2100
+  lp486e 3c501 3c503 3c505 3c507 3c509 3c515 myri10ge
+Solution:
+- Enter the one you need in MODULES=()
+
+=======================================
+* Known Problems with MOD_AUTOLOAD="no"
+=======================================
+
+-----------------------------------------------------------------
+* Modules are not loaded anymore during coldplug or hotplug event
+-----------------------------------------------------------------
+- Udev is usually responsible for this, but the MOD_AUTOLOAD switch will
+  now disable it.  If you want automatic hot/cold-plugging, turn on
+  MOD_AUTOLOAD.  Otherwise you will have to load all your modules manually,
+  either with /sbin/modprobe or entries in the MODULES=() array.
+Solution: 
+- For bootup (coldplug) enter this in rc.conf: MODULES=(moduleA moduleB)  
+- After bootup (hotplug) use this: modprobe <moduleA>
+
+=========================================
+* Known problems for custom kernel users:
+=========================================
+
+----------------------------
+* Udev doesn't start at all:
+----------------------------
+- Check Requirements list
diff --git a/abs/core/udev/root-link.sh b/abs/core/udev/root-link.sh
new file mode 100755
index 0000000..05273fe
--- /dev/null
+++ b/abs/core/udev/root-link.sh
@@ -0,0 +1,7 @@
+#! /bin/sh
+# Creates root symlink in /dev
+# for Arch Linux by Roman Kyrylych <Roman.Kyrylych@gmail.com>
+
+if ! [ -L /dev/root ]; then 
+ln -s $(cat /proc/cmdline | sed "s: :\n:g" | grep root= | sed "s:root=::") /dev/root
+fi
\ No newline at end of file
diff --git a/abs/core/udev/start_udev b/abs/core/udev/start_udev
new file mode 100755
index 0000000..03c38fd
--- /dev/null
+++ b/abs/core/udev/start_udev
@@ -0,0 +1,137 @@
+#! /bin/sh
+#
+# start_udev
+# script to initialize /dev by using udev.
+#
+# Modified for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
+#
+# Inspired by:
+# 
+# Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+#
+# Released under the GPL v2 only.
+#
+# This needs to be run at the earliest possible point in the boot 
+# process.
+#
+# Based on the udev init.d script
+#
+# Thanks go out to the Gentoo developers for proving 
+# that this is possible to do.
+#
+# Yes, it's very verbose, feel free to turn off all of the echo calls,
+# they were there to make me feel better that everything was working
+# properly during development...
+#
+
+prog=udev
+sysfs_dir=/sys
+bin=/sbin/udev
+udevd=/sbin/udevd
+udev_root="/dev"
+
+starttime=$(date +%s)
+
+
+function trigger_builtin_events() {   
+           list="$(echo /sys/class/tty/ttyS*/uevent)"   
+           for i in $list; do   
+               case "$i" in   
+                   */class/uevent|*\**)   
+                       continue   
+                       ;;   
+                   */class/tty/ttyS*)   
+                       echo "add" > "$i"   
+                       ;;   
+               esac   
+           done   
+   }
+
+function trigger_device_events() {
+	/sbin/udevtrigger
+}
+
+function wait_for_queue() {
+#	loop=20
+#        while ! [ "$loop" -gt 0 -a -d /dev/.udev/queue ]; do
+#                   sleep 0.1;
+#                   loop=$(($loop - 1))
+#        done
+	/sbin/udevsettle
+}
+
+make_extra_nodes () {
+	# there are a few things that sysfs does not export for us.
+	# these things go here (and remember to remove them in 
+	# remove_extra_nodes()
+	#
+	# Thanks to Gentoo for the initial list of these.
+	ln -snf /proc/self/fd $udev_root/fd
+	ln -snf /proc/self/fd/0 $udev_root/stdin
+	ln -snf /proc/self/fd/1 $udev_root/stdout
+	ln -snf /proc/self/fd/2 $udev_root/stderr
+	ln -snf /proc/kcore $udev_root/core
+
+	mkdir $udev_root/pts
+	mkdir $udev_root/shm
+}
+
+udev_init  () {
+# don't use udev if sysfs is not mounted.
+if [ ! -d $sysfs_dir/block ]; then
+	exit 1
+fi
+
+echo "mounting... ramfs at $udev_root"
+mount -n -t ramfs none $udev_root
+
+# propogate /udev from /sys
+echo "Creating initial udev device nodes:"
+
+#echo "making extra nodes"
+make_extra_nodes
+
+# check if udevd is already running
+if [ `pidof -o %PPID /sbin/udevd` ]; then
+	grep -v "/dev/shm" /etc/mtab | grep -v "/dev/pts" > /etc/mtab
+	mount /dev/pts
+	mount /dev/shm
+else
+	echo "start udev daemon"
+	/sbin/udevd --daemon
+fi
+case "$(uname -r)" in
+       2.6.[0-9]|2.6.[0-9][!0-9]*) ;;
+       *) 	if [ -f "/sys/class/tty/console/uevent" ]; then
+			echo "Kernel >= 2.6.15 and supports uevents"
+			# trigger the sorted events
+			echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
+			# catch events that are real fast
+			mkdir -p /dev/.udev/queue
+			trigger_builtin_events
+		else
+			# for older kernels without uevents will be removed when udevstart dies in udev
+			echo "Kernel does not support uevents, you need a kernel >= 2.6.15!"
+			exit 1
+		fi 
+	;;
+esac
+}
+
+udev_uevents () {
+# configure all devices
+trigger_device_events
+# until we know how to do better, just wait for _all_ events to finish
+wait_for_queue
+}
+
+if [ $# -eq 0 ]; then
+udev_init
+udev_uevents
+fi
+
+[ "$1" = "init" ] && udev_init
+[ "$1" = "uevents" ] && udev_uevents
+
+echo "udev startup is finished! - time = $(( `date +%s` - $starttime ))"
+exit 0
diff --git a/abs/core/udev/udev.install b/abs/core/udev/udev.install
new file mode 100644
index 0000000..19d3546
--- /dev/null
+++ b/abs/core/udev/udev.install
@@ -0,0 +1,22 @@
+# arg 1:  the new package version
+post_install() {
+  sbin/migrate-udev `pwd`
+}
+
+# arg 1:  the new package version
+# arg 2:  the old package version
+post_upgrade() {
+if [ "$(vercmp $2 100)" -lt 0 ]; then
+  echo "ATTENTION UDEV:"
+  echo "----------"
+  echo "udev >=098 rules syntax has changed, please update your own rules."
+  echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
+  echo "Please read the instructions carefully before reboot."
+  echo "They are located in /etc/udev/readme-udev-arch.txt"
+  echo "----------"
+fi
+}
+
+op=$1
+shift
+$op $*
diff --git a/abs/core/udev/udev.rules b/abs/core/udev/udev.rules
new file mode 100644
index 0000000..f789e50
--- /dev/null
+++ b/abs/core/udev/udev.rules
@@ -0,0 +1,456 @@
+# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
+#
+# This ruleset should provide a DevFS-compatible device tree.
+#
+# There are a number of modifiers that are allowed to be used in some
+# of the different fields. They provide the following subsitutions:
+#
+# %n the "kernel number" of the device.
+#    For example, 'sda3' has a "kernel number" of '3'
+# %k the kernel name for the device.
+# %M the kernel major number for the device
+# %m the kernel minor number for the device
+# %b the bus id for the device
+# %c the string returned by the PROGRAM
+# %s{filename} the content of a sysfs attribute.
+# %% the '%' char itself.
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields.  See the udev man page for a full description of them.
+# global stuff
+#
+
+#####################################
+# Early rules - begin
+#####################################
+# wait for sysfs
+ACTION=="add", KERNEL=="[0-9]*:[0-9]*", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
+# Setting timeout for tape-devices (type 1) to 900 seconds
+# and 60 seconds for device types 0, 7 and 14
+SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
+SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
+#####################################
+# Early rules -end
+#####################################
+
+#####################################
+###### Hotplug rules - begin
+#####################################
+# check if the device has already been claimed by a driver
+ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_driver_loaded"
+ACTION!="add", GOTO="hotplug_not_add_event"
+
+#Skip auto-loading of framebuffer devices
+KERNEL=="fb[0-9]*", GOTO="hotplug_driver_loaded"
+
+# Modaliases to load
+ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
+
+# SCSI addon modules
+SUBSYSTEM=="scsi", ATTRS{type}=="[07]", RUN+="/lib/udev/load-modules.sh sd_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="14", RUN+="/lib/udev/load-modules.sh sd_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sr_mod"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}!="ADR*", RUN+="/lib/udev/load-modules.sh osst"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}=="ADR*", RUN+="/lib/udev/load-modules.sh st"
+SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}!="Onstream", RUN+="/lib/udev/load-modules.sh st"
+SUBSYSTEM=="scsi", ATTRS{type}=="[235689]", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
+
+# load sg module for burners
+SUBSYSTEM=="block", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sg"
+
+# MMC block devices
+SUBSYSTEM=="mmc", RUN+="/lib/udev/load-modules.sh mmc_block"
+
+# I2O block devices
+SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
+
+# Skip already claimed drivers
+DRIVERS=="?*", GOTO="hotplug_driver_loaded"
+
+# PNP modules
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/load-modules.sh pnp:d$$id; /lib/udev/load-modules.sh pnp:c$$id ; done < /sys$devpath/id'"
+
+# SOUND addon modules
+SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-pcm-oss"
+SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
+
+LABEL="hotplug_driver_loaded"
+
+#PNP addon modules
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
+# not needed anymore with kernel >= 2.6.21
+#ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc_cmos"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
+
+# PARPORT addon modules
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
+ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh ppdev"
+
+# fix ide cdrom detection on old proliant servers
+ACTION=="add", SUBSYSTEM=="pci", ENV{MODALIAS}=="pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00", RUN+="/lib/udev/load-modules.sh ide-generic"
+
+# FIRMWARE
+ACTION=="add", SUBSYSTEM=="firmware", ENV{FIRMWARE}=="?*", RUN+="/lib/udev/firmware.sh"
+LABEL="hotplug_not_add_event"
+#####################################
+##### Hotplug rules - end
+#####################################
+
+#####################################
+###### CD/DVD symlinks - begin
+#####################################
+ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
+ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="sr[0-9]*", IMPORT="/lib/udev/cdrom_id --export $tempnode"
+ACTION=="add", SUBSYSTEMS=="scsi",	KERNEL=="scd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
+ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
+ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
+ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
+ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
+ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
+ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
+ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
+ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
+#####################################
+###### CD/DVD symlinks - end
+#####################################
+
+# fix /dev/root symlink
+SUBSYSTEM=="block", RUN+="/lib/udev/root-link.sh"
+
+#####################################
+# Permissions and Symlinks - begin
+#####################################
+# default permissions for all block devices
+SUBSYSTEM=="block", 	GROUP="disk"
+
+# permissions for IDE CD devices
+SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
+
+# permissions for SCSI CD devices
+SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROUP="optical"
+SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
+
+# permissions for IDE floppy devices
+SUBSYSTEMS=="ide", KERNEL=="hd*", ATTRS{media}=="floppy*", NAME{all_partitions}="%k", GROUP="floppy"
+
+# permissions for removable devices like cardreaders or sticks
+KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
+
+# permissions for firewire external drives
+KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
+
+# permissions for usb to scsi external adapters
+KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="7", GROUP="storage"
+
+# permissions for ide storage like pcmcia card readers
+ACTION!="add", GOTO="pcmcia_end"
+SUBSYSTEM!="block", GOTO="pcmcia_end"
+KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
+KERNEL=="hd*", IMPORT{parent}=="ID_*"
+KERNEL=="hd*", ENV{ID_TYPE}=="generic", GROUP="storage"
+LABEL="pcmcia_end"
+
+# permissions for SCSI scanners
+SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
+
+# pty and tty legacy devices
+KERNEL=="pty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
+KERNEL=="tty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
+
+# md block devices
+KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
+
+# device-mapper
+KERNEL=="device-mapper", NAME="mapper/control"
+
+# floppy devices
+KERNEL=="fd[0-9]*", NAME="fd%n", SYMLINK+="floppy/%n fd%nu1440 fd%nu720 fd%nh1200 fd%nu360", GROUP="floppy"
+
+# tty devices
+SUBSYSTEM=="tty",	GROUP="tty"
+KERNEL=="tty[0-9]*",    NAME="vc/%n", SYMLINK+="%k"
+KERNEL=="ttyS[0-9]*",   NAME="tts/%n", SYMLINK+="ttyS%n"
+KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
+
+# vc devices
+KERNEL=="vcs",        NAME="vcc/0", OPTIONS="last_rule"
+KERNEL=="vcs[0-9]*",  NAME="vcc/%n", OPTIONS="last_rule"
+KERNEL=="vcsa",       NAME="vcc/a0", OPTIONS="last_rule"
+KERNEL=="vcsa[0-9]*", NAME="vcc/a%n", OPTIONS="last_rule"
+KERNEL=="ptmx",		MODE="0666", OPTIONS="last_rule"
+KERNEL=="tty",		MODE="0666", OPTIONS="last_rule"
+
+# video devices
+SUBSYSTEM=="video4linux", GROUP="video"
+KERNEL=="dvb*",	PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; A=$${K%%%%.*}; D=$${K#*.}; echo dvb/adapter$$A/$$D'", \
+		NAME="%c", GROUP="video"
+### xorg resets those permissions, adjust your xorg.conf!
+KERNEL=="nvidia*",	GROUP="video"
+KERNEL=="card[0-9]*",	NAME="dri/%k", GROUP="video"
+KERNEL=="3dfx*",	GROUP="video"
+
+# v4l devices
+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k", GROUP="video"
+KERNEL=="video0", SYMLINK+="video"
+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="radio0", SYMLINK+="radio"
+KERNEL=="vbi[0-9]*",   NAME="v4l/vbi%n", SYMLINK+="%k", GROUP="video"
+KERNEL=="vbi0", SYMLINK+="vbi"
+KERNEL=="vtx[0-9]*",   NAME="v4l/vtx%n", SYMLINK+="%k", GROUP="video"
+KERNEL=="vtx0", SYMLINK+="vtx"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
+
+# loop devices
+KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
+
+# ramdisks
+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
+
+# framebuffer devices
+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# misc
+KERNEL=="rtc*",     NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
+KERNEL=="rtc0",     SYMLINK+="rtc"
+KERNEL=="nvram",   NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
+KERNEL=="psaux",   NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k" GROUP="video"
+KERNEL=="uinput",  NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="random",        MODE="0666"
+KERNEL=="urandom",       MODE="0666"
+KERNEL=="mem",           MODE="0640", GROUP="kmem"
+KERNEL=="kmem",          MODE="0640", GROUP="kmem"
+KERNEL=="port",          MODE="0640", GROUP="kmem"
+KERNEL=="full",          MODE="0666"
+KERNEL=="null",          MODE="0666"
+KERNEL=="zero",          MODE="0666"
+KERNEL=="sgi_fetchop",   MODE="0666"
+KERNEL=="sonypi",        MODE="0666"
+KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid", SYMLINK="%k"
+KERNEL=="msr[0-9]*", NAME="cpu/%n/msr", SYMLINK="%k"
+
+# sound devices
+# alsa devices
+SUBSYSTEM=="sound",	GROUP="audio"
+KERNEL=="controlC[0-9]*", NAME="snd/%k"
+KERNEL=="hw[CD0-9]*",     NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*",  NAME="snd/%k"
+KERNEL=="midi[CD0-9]*",   NAME="snd/%k"
+KERNEL=="timer",          NAME="snd/%k"
+KERNEL=="seq",            NAME="snd/%k"
+# oss devices
+KERNEL=="audio*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="dmmidi*",    NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="admmidi*",   NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="dsp*",       NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="adsp*",      NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="midi*",      NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="amidi*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="mixer*",     NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice",   NAME="input/%k", MODE="0644"
+KERNEL=="mouse*", NAME="input/%k", MODE="0644"
+KERNEL=="event*", NAME="input/%k"
+KERNEL=="js*",    NAME="input/%k", MODE="0664"
+KERNEL=="ts*",	 NAME="input/%k"
+KERNEL=="uinput", NAME="input/%k"
+
+# USB devices
+KERNEL=="hiddev*",	NAME="usb/%k"
+KERNEL=="auer*",		NAME="usb/%k"
+KERNEL=="legousbtower*",	NAME="usb/%k", MODE="0666"
+KERNEL=="dabusb*",	NAME="usb/%k"
+SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*",	NAME="usb/%k", GROUP="lp"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Palm Handheld*", SYMLINK+="pilot"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="palmOne Handheld*", SYMLINK+="pilot"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Handspring Visor*", SYMLINK+="pilot"
+
+# printer devices
+SUBSYSTEM=="printer",	GROUP="lp"
+
+# netlink devices
+KERNEL=="route",		NAME="netlink/%k"
+KERNEL=="skip",		NAME="netlink/%k"
+KERNEL=="usersock",	NAME="netlink/%k"
+KERNEL=="fwmonitor",	NAME="netlink/%k"
+KERNEL=="tcpdiag",	NAME="netlink/%k"
+KERNEL=="nflog",		NAME="netlink/%k"
+KERNEL=="xfrm",		NAME="netlink/%k"
+KERNEL=="arpd",		NAME="netlink/%k"
+KERNEL=="route6",	NAME="netlink/%k"
+KERNEL=="ip6_fw",	NAME="netlink/%k"
+KERNEL=="dnrtmsg",	NAME="netlink/%k"
+### ! disabled seems to break device creation !
+# KERNEL=="tap*",		NAME="netlink/%k"
+
+# CAPI devices
+KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20"
+KERNEL=="capi*",		NAME="capi/%n"
+
+# Network devices
+KERNEL=="tun",		NAME="net/%k", OPTIONS+="ignore_remove"
+KERNEL=="ppp",          OPTIONS+="ignore_remove"
+
+# IEEE1394 (firewire) devices
+KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
+KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
+
+# raw devices
+KERNEL=="raw[0-9]*",     NAME="raw/%k" 
+
+# kbd devices
+KERNEL=="kbd",		MODE="0664"
+
+# packet devices
+KERNEL=="pktcdvd",	NAME="pktcdvd/control", GROUP="optical", MODE="0660"
+KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="optical", MODE="0660"
+
+# usbfs-like device nodes, libusb device access
+# for kernel 2.6.21 and below
+SUBSYSTEM=="usb_device", ACTION=="add", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev};printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0664"
+# starting from kernel 2.6.22 use this rule
+SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664" 
+#######################################
+# Permissions and Symlinks - end
+#######################################
+
+#######################################
+# Persistant block device stuff - begin
+#######################################
+# persistent storage links: /dev/{disk,tape}/{by-id,by-uuid,by-label,by-path,by-name}
+# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
+
+# needed like this!!!
+ACTION!="add|change", GOTO="persistent_storage_end"
+KERNEL=="nst[0-9]", SUBSYSTEMS=="scsi", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
+
+# type 8 devices are "Medium Changers"
+KERNEL=="sg*", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+SUBSYSTEM!="block", GOTO="persistent_storage_end"
+
+# skip rules for inappropriate block devices
+# don't add dm-*!!!
+KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*", GOTO="persistent_storage_end"
+
+# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
+KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
+KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GOTO="persistent_storage_end"
+
+# ignore partitions that span the entire disk
+ATTR{whole_disk}=="*", GOTO="persistent_storage_end"
+
+# /sys/class/block will export this
+ENV{DEVTYPE}!="?*", ATTR{range}=="?*", ENV{DEVTYPE}="disk"
+ENV{DEVTYPE}!="?*", ATTR{start}=="?*", ENV{DEVTYPE}="partition"
+
+# for partitions import parent information
+ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
+
+# by-id (hardware serial number)
+KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
+KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
+KERNEL=="hd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"
+
+KERNEL=="sd*[!0-9]|sr*|st*", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_SUBSYSTEMS}="ieee1394"
+KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export %p"
+KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode"
+KERNEL=="cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --ignore-sysfs -s %p -d $tempnode", ENV{ID_BUS}="cciss"
+KERNEL=="sd*[!0-9]|sr*|cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sd*[0-9]|cciss*p[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+KERNEL=="st*", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+
+# libata compat (links like hd*)
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_VENDOR}=="ATA", PROGRAM="/lib/udev/ata_id $tempnode", RESULT=="?*", ENV{ID_ATA_COMPAT}="$result", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}"
+KERNEL=="sd*[0-9]", ENV{ID_ATA_COMPAT}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}-part%n"
+
+KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
+KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
+ 
+# by-path (shortest physical path)
+ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/path_id %p"
+ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
+ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
+KERNEL=="st*", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
+
+KERNEL=="sr*|st*", GOTO="persistent_storage_end"
+KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GOTO="persistent_storage_end"
+
+# by-label/by-uuid (filesystem properties)
+IMPORT{program}="/lib/udev/vol_id --export $tempnode"
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+
+# BIOS Enhanced Disk Device
+ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/edd_id --export $tempnode"
+ENV{DEVTYPE}=="disk", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}"
+ENV{DEVTYPE}=="partition", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}-part%n"
+LABEL="persistent_storage_end"
+
+# md links hook into "change" events, when the array becomes available
+KERNEL!="md[0-9]*", GOTO="md_end"
+ACTION!="add|change", GOTO="md_end"
+
+ATTR{md/array_state}=="|clear|inactive", GOTO="md_end"
+IMPORT{program}="/lib/udev/vol_id --export $tempnode"
+OPTIONS="link_priority=100"
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+LABEL="md_end"
+# Persistant block device stuff - end
+#####################################
+
+#######################################
+# Persistant input stuff - begin
+#######################################
+SUBSYSTEM!="input",                     GOTO="persistent_input_end"
+ACTION!="add",                          GOTO="persistent_input_end"
+# ignore the mid-level drivers
+KERNEL=="input[0-9]*",                  GOTO="persistent_input_end"
+ 
+# usb devices
+SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export"
+SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="01", ENV{ID_CLASS}="kbd"
+SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="02", ENV{ID_CLASS}="mouse"
+
+# other devices
+DRIVERS=="pcspkr",                       ENV{ID_CLASS}="spkr"
+DRIVERS=="atkbd",                        ENV{ID_CLASS}="kbd"
+DRIVERS=="psmouse",                      ENV{ID_CLASS}="mouse"
+ATTRS{name}=="*dvb*|*DVB*|* IR *",      ENV{ID_CLASS}="ir"
+ATTRS{modalias}=="input:*-*a[068],*|input:*-*a*,[68],*m*", ATTRS{modalias}!="input:*-*k*14A,*r*", ENV{ID_CLASS}="joystick"
+
+# fill empty serial number
+ENV{ID_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
+
+# by-id links, generic and for the event devices
+KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_CLASS}"
+KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{ID_CLASS}"
+
+ 
+# by-path links
+IMPORT{program}="/lib/udev/path_id %p"
+KERNEL=="mouse*|js*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{ID_CLASS}"
+KERNEL=="event*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{ID_CLASS}" 
+
+LABEL="persistent_input_end"
+#####################################
+# Persistant input stuff - end
+#####################################
+
+# run a command on remove events
+ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
diff --git a/abs/core/udev/usb_id-fix.patch b/abs/core/udev/usb_id-fix.patch
new file mode 100644
index 0000000..35fb2e1
--- /dev/null
+++ b/abs/core/udev/usb_id-fix.patch
@@ -0,0 +1,107 @@
+From: Kay Sievers <kay.sievers@vrfy.org>
+Date: Mon, 15 Oct 2007 18:38:20 +0000 (+0200)
+Subject: usb_id: fail if vendor/product can not be retrieved
+X-Git-Url: http://git.kernel.org/?p=linux%2Fhotplug%2Fudev.git;a=commitdiff_plain;h=963033472f8d2aab0bf77147b916de8f3b0b5450
+
+usb_id: fail if vendor/product can not be retrieved
+
+Thanks to Daniel Drake for identifying the bug.
+---
+
+diff --git a/extras/usb_id/usb_id.c b/extras/usb_id/usb_id.c
+index d36a27b..5fb030d 100644
+--- a/extras/usb_id/usb_id.c
++++ b/extras/usb_id/usb_id.c
+@@ -1,7 +1,5 @@
+ /*
+- * usb_id.c
+- *
+- * Identify an USB (block) device
++ * usb_id - identify an USB device
+  *
+  * Copyright (c) 2005 SUSE Linux Products GmbH, Germany
+  *
+@@ -224,8 +222,6 @@ static int usb_id(const char *devpath)
+ 	struct sysfs_device *dev;
+ 	struct sysfs_device *dev_interface;
+ 	struct sysfs_device *dev_usb;
+-	const char *scsi_model, *scsi_vendor, *scsi_type, *scsi_rev;
+-	const char *usb_model = NULL, *usb_vendor = NULL, *usb_rev, *usb_serial;
+ 	const char *if_class, *if_subclass;
+ 	int if_class_num;
+ 	int protocol = 0;
+@@ -271,6 +267,7 @@ static int usb_id(const char *devpath)
+ 	/* mass storage */
+ 	if (protocol == 6 && !use_usb_info) {
+ 		struct sysfs_device *dev_scsi;
++		const char *scsi_model, *scsi_vendor, *scsi_type, *scsi_rev;
+ 		int host, bus, target, lun;
+ 
+ 		/* get scsi device */
+@@ -321,40 +318,50 @@ static int usb_id(const char *devpath)
+ 	}
+ 
+ fallback:
+-	/* Fallback to USB vendor & device */
++	/* fallback to USB vendor & device */
+ 	if (vendor_str[0] == '\0') {
++		const char *usb_vendor = NULL;
++
+ 		if (!use_num_info)
+-			if (!(usb_vendor = sysfs_attr_get_value(dev_usb->devpath, "manufacturer")))
+-				dbg("No USB vendor string found, using idVendor");
++			usb_vendor = sysfs_attr_get_value(dev_usb->devpath, "manufacturer");
++
++		if (!usb_vendor)
++			usb_vendor = sysfs_attr_get_value(dev_usb->devpath, "idVendor");
+ 
+ 		if (!usb_vendor) {
+-			if (!(usb_vendor = sysfs_attr_get_value(dev_usb->devpath, "idVendor"))) {
+-				dbg("No USB vendor information available\n");
+-				sprintf(vendor_str,"0000");
+-			}
++			info("No USB vendor information available");
++			return 1;
+ 		}
+-		set_str(vendor_str,usb_vendor, sizeof(vendor_str) - 1);
++		set_str(vendor_str, usb_vendor, sizeof(vendor_str)-1);
+ 	}
+-	
++
+ 	if (model_str[0] == '\0') {
++		const char *usb_model = NULL;
++
+ 		if (!use_num_info)
+-			if (!(usb_model = sysfs_attr_get_value(dev_usb->devpath, "product")))
+-				dbg("No USB model string found, using idProduct");
+-		
++			usb_model = sysfs_attr_get_value(dev_usb->devpath, "product");
++
++		if (!usb_model)
++			usb_model = sysfs_attr_get_value(dev_usb->devpath, "idProduct");
++
+ 		if (!usb_model) {
+-			if (!(usb_model = sysfs_attr_get_value(dev_usb->devpath, "idProduct")))
+-				dbg("No USB model information available\n"); sprintf(model_str,"0000");
++			dbg("No USB model information available");
++			return 1;
+ 		}
+-		set_str(model_str, usb_model, sizeof(model_str) - 1);
++		set_str(model_str, usb_model, sizeof(model_str)-1);
+ 	}
+ 
+ 	if (revision_str[0] == '\0') {
++		const char *usb_rev;
++
+ 		usb_rev = sysfs_attr_get_value(dev_usb->devpath, "bcdDevice");
+ 		if (usb_rev)
+ 			set_str(revision_str, usb_rev, sizeof(revision_str)-1);
+ 	}
+ 
+ 	if (serial_str[0] == '\0') {
++		const char *usb_serial;
++
+ 		usb_serial = sysfs_attr_get_value(dev_usb->devpath, "serial");
+ 		if (usb_serial)
+ 			set_str(serial_str, usb_serial, sizeof(serial_str)-1);
+