initial import

3 files changed, 359 insertions, 0 deletions

diff --git a/abs/core/wpa_supplicant/PKGBUILD b/abs/core/wpa_supplicant/PKGBUILD
new file mode 100644
index 0000000..2f022ce
--- /dev/null
+++ b/abs/core/wpa_supplicant/PKGBUILD
@@ -0,0 +1,36 @@
+# Contributor: iztok pizorn <pizorn@gmail.com>
+# Contributor: William Rea <sillywilly@gmail.com>
+pkgname=wpa_supplicant
+pkgver=0.5.10
+_madwifi_ver=0.9.4
+pkgrel=10
+pkgdesc="A utility providing key negotiation for WPA wireless networks"
+arch=('i686' 'x86_64')
+makedepends=('kernel26>=2.6.24' 'kernel26<=2.6.26.3')
+depends=('openssl')
+license=('GPL')
+groups=('base')
+backup=('etc/wpa_supplicant.conf')
+url="http://hostap.epitest.fi/wpa_supplicant"
+source=(http://hostap.epitest.fi/releases/wpa_supplicant-$pkgver.tar.gz
+        config
+	http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz)
+install='wpa_supplicant.install'
+md5sums=('9e7b99da67c47d81121368c6d580d069'
+         '87a7bb38e0b4820b29065a9b3e8f4e06'
+         '399d20de8d855a59f20058857c2178ad')
+
+build() {
+  cd ${startdir}/src/
+  mv madwifi-${_madwifi_ver} madwifi
+  cd $startdir/src/$pkgname-$pkgver
+  cp ../config ./.config
+  sed -i 's@/usr/local@$(PREFIX)@g' Makefile
+  sed -i 's@dynamic_eap_methods@@g' Makefile
+  make || return 1
+  make PREFIX=/usr DESTDIR=$startdir/pkg install || return 1
+  install -D -m644 wpa_supplicant.conf $startdir/pkg/etc/wpa_supplicant.conf || return 1
+  install -d -m755 $startdir/pkg/usr/man/man{5,8} || return 1
+  install -m644 doc/docbook/wpa_supplicant.conf.5 $startdir/pkg/usr/man/man5 || return 1
+  install -m644 doc/docbook/{wpa_background,wpa_cli,wpa_passphrase,wpa_supplicant}.8 $startdir/pkg/usr/man/man8 || return 1
+}
diff --git a/abs/core/wpa_supplicant/config b/abs/core/wpa_supplicant/config
new file mode 100644
index 0000000..8841fe3
--- /dev/null
+++ b/abs/core/wpa_supplicant/config
@@ -0,0 +1,308 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#	-I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+# Change include directories to match with the local setup
+CFLAGS += -I../madwifi
+
+# Driver interface for Prism54 driver
+# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
+# for developers only)
+CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for ndiswrapper
+CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for Broadcom driver
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+CONFIG_DRIVER_IPW=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Replace native Linux implementation of packet sockets with libdnet/libpcap.
+# This will be automatically set for non-Linux OS.
+#CONFIG_DNET_PCAP=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove AES extra functions. This can be used to reduce code size by about
+# 1.5 kB by removing extra AES modes that are not needed for commonly used
+# client configurations (they are needed for some EAP types).
+#CONFIG_NO_AES_EXTRAS=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
+#CONFIG_STAKEY=y
+
+# Proposed replacement for STAKey negotiation: PeerKey handshake for
+# Station to Station Link
+CONFIG_PEERKEY=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomCrypt and TomsFastMath.
+#LTC_PATH=/usr/src/libtomcrypt-1.11
+#TFM_PATH=/usr/src/tomsfastmath-0.09
+#CFLAGS += -I$(LTC_PATH)/src/headers
+#LIBS += -L$(LTC_PATH) -L$(TFM_PATH)
+#LIBS_p += -L$(LTC_PATH) -L$(TFM_PATH)
+
+# Integrate ndis_events.exe functionality into wpa_supplicant.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for DBus control interface
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+CONFIG_DYNAMIC_EAP_METHODS=y
+
+# Include client MLME (management frame processing).
+# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
+# into user space.
+#CONFIG_CLIENT_MLME=y
+# Currently, driver_devicescape.c build requires some additional parameters
+# to be able to include some of the kernel header files. Following lines can
+# be used to set these (WIRELESS_DEV must point to the root directory of the
+# wireless-dev.git tree).
+WIRELESS_DEV=/lib/modules/2.6.24-ARCH/build
+CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
diff --git a/abs/core/wpa_supplicant/wpa_supplicant.install b/abs/core/wpa_supplicant/wpa_supplicant.install
new file mode 100644
index 0000000..0c31765
--- /dev/null
+++ b/abs/core/wpa_supplicant/wpa_supplicant.install
@@ -0,0 +1,15 @@
+# arg 1:  the new package version
+post_install() {
+  post_upgrade
+}
+
+# arg 1:  the new package version
+# arg 2:  the old package version
+post_upgrade() {
+  echo "==> For wpa_gui please install 'wpa_supplicant_gui'"
+}
+
+op=$1
+shift
+
+$op $*