ddclient LinHES-config runit-scripts: add dyndns support

1 files changed, 162 insertions, 0 deletions

diff --git a/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample b/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample
new file mode 100644
index 0000000..a492c8b
--- /dev/null
+++ b/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample
@@ -0,0 +1,162 @@
+######################################################################
+## 
+## $Id: sample-etc_ddclient.conf 102 2008-11-01 11:23:03Z wimpunk $
+##
+## Define default global variables with lines like:
+## 	var=value [, var=value]*
+## These values will be used for each following host unless overridden
+## with a local variable definition.
+##
+## Define local variables for one or more hosts with:
+## 	var=value [, var=value]* host.and.domain[,host2.and.domain...]
+##
+## Lines can be continued on the following line by ending the line
+## with a \
+##
+##
+## Warning: not all supported routers or dynamic DNS services 
+##          are mentioned here.
+##
+######################################################################
+daemon=300				# check every 300 seconds
+syslog=yes				# log update msgs to syslog
+mail=root				# mail all msgs to root
+mail-failure=root			# mail failed update msgs to root
+pid=/var/run/ddclient.pid		# record PID in file.
+ssl=yes					# use ssl-support.  Works with
+					# ssl-library
+# postscript=script			# run script after updating.  The
+					# new IP is added as argument.
+#
+#use=watchguard-soho,        fw=192.168.111.1:80	# via Watchguard's SOHO FW
+#use=netopia-r910,           fw=192.168.111.1:80	# via Netopia R910 FW
+#use=smc-barricade,          fw=192.168.123.254:80	# via SMC's Barricade FW
+#use=netgear-rt3xx,          fw=192.168.0.1:80		# via Netgear's internet FW
+#use=linksys,                fw=192.168.1.1:80		# via Linksys's internet FW
+#use=maxgate-ugate3x00,      fw=192.168.0.1:80		# via MaxGate's UGATE-3x00  FW
+#use=elsa-lancom-dsl10,      fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed Touch Pro
+#use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero Router
+#use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL Router
+#use=3com-oc-remote812,	     fw=192.168.0.254:80	# via 3com OfficeConnect Remote 812
+#use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
+#use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H DSL Router
+#
+#fw-login=admin,             fw-password=XXXXXX		# FW login and password
+#
+## To obtain an IP address from FW status page (using fw-login, fw-password)
+#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
+#
+## To obtain an IP address from Web status page (using the proxy if defined)
+#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
+#
+#use=ip,                     ip=127.0.0.1	# via static IP's
+#use=if,                     if=eth0		# via interfaces
+use=web					# via web
+#
+#protocol=dyndns2				# default protocol
+#proxy=fasthttp.sympatico.ca:80			# default proxy
+#server=members.dyndns.org			# default server
+#server=members.dyndns.org:8245			# default server (bypassing proxies)
+
+login=your-dynamic-dyndns-login			# default login
+password=your-dynamic-dyndns-password		# default password
+#mx=mx.for.your.host				# default MX
+#backupmx=yes|no				# host is primary MX?
+#wildcard=yes|no				# add wildcard CNAME?
+
+##
+## dyndns.org dynamic addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+server=members.dyndns.org,		\
+protocol=dyndns2			\
+your-dynamic-dyndns-host
+
+##
+## dyndns.org static addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+# static=yes,				\
+# server=members.dyndns.org,		\
+# protocol=dyndns2			\
+# your-static-host.dyndns.org
+
+##
+##
+## dyndns.org custom addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+# custom=yes,				\
+# server=members.dyndns.org,		\
+# protocol=dyndns2			\
+# your-domain.top-level,your-other-domain.top-level
+
+##
+## ZoneEdit (zoneedit.com)
+##
+# server=dynamic.zoneedit.com, 		\
+# protocol=zoneedit1,			\
+# login=your-zoneedit-login,  		\
+# password=your-zoneedit-password	\
+# your.any.domain,your-2nd.any.dom
+
+##
+## EasyDNS (easydns.com)
+##
+# server=members.easydns.com, 		\
+# protocol=easydns,			\
+# login=your-easydns-login,  		\
+# password=your-easydns-password	\
+# your.any.domain,your-2nd.any.domain
+
+##
+## Hammernode (hn.org) dynamic addresses
+##
+# server=dup.hn.org,             	\
+# protocol=hammernode1,         	\
+# login=your-hn-login,           	\
+# password=your-hn-password      	\
+# your-hn-host.hn.org,your-2nd-hn-host.hn.org
+
+##
+## dslreports.com dynamic-host monitoring
+##
+# server=members.dslreports.com		\
+# protocol=dslreports1,			\
+# login=dslreports-login,		\
+# password=dslreports-password		\
+# dslreports-unique-id
+
+##
+## OrgDNS.org account-configuration
+##
+# use=web, web=members.orgdns.org/nic/ip
+# server=www.orgdns.org 		\
+# protocol=dyndns2 			\
+# login=yourLoginName 			\
+# password=yourPassword 		\
+# yourSubdomain.orgdns.org
+
+##
+## dnspark.com
+## (supports variables: mx, mxpri)
+##
+# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:'
+# protocol=dnspark,			\
+# server=www.dnspark.com,		\
+# your-host.dnspark.com
+
+##
+## NameCheap (namecheap.com)
+##
+# protocol=namecheap,				\
+# server=dynamicdns.park-your-domain.com,	\
+# login=my-namecheap.com-login,			\
+# password=my-namecheap.com-password		\
+# myhost.namecheap.com