Removed old core and extra from repo. Renamed -testing to core/extra. This will setup the base for the testing branch.

1 files changed, 0 insertions, 162 deletions

diff --git a/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample b/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample
deleted file mode 100644
index a492c8b..0000000
--- a/abs/extra-testing/ddclient/ddclient.conf.dynamic.dyndns.sample
+++ /dev/null
@@ -1,162 +0,0 @@
-######################################################################
-## 
-## $Id: sample-etc_ddclient.conf 102 2008-11-01 11:23:03Z wimpunk $
-##
-## Define default global variables with lines like:
-## 	var=value [, var=value]*
-## These values will be used for each following host unless overridden
-## with a local variable definition.
-##
-## Define local variables for one or more hosts with:
-## 	var=value [, var=value]* host.and.domain[,host2.and.domain...]
-##
-## Lines can be continued on the following line by ending the line
-## with a \
-##
-##
-## Warning: not all supported routers or dynamic DNS services 
-##          are mentioned here.
-##
-######################################################################
-daemon=300				# check every 300 seconds
-syslog=yes				# log update msgs to syslog
-mail=root				# mail all msgs to root
-mail-failure=root			# mail failed update msgs to root
-pid=/var/run/ddclient.pid		# record PID in file.
-ssl=yes					# use ssl-support.  Works with
-					# ssl-library
-# postscript=script			# run script after updating.  The
-					# new IP is added as argument.
-#
-#use=watchguard-soho,        fw=192.168.111.1:80	# via Watchguard's SOHO FW
-#use=netopia-r910,           fw=192.168.111.1:80	# via Netopia R910 FW
-#use=smc-barricade,          fw=192.168.123.254:80	# via SMC's Barricade FW
-#use=netgear-rt3xx,          fw=192.168.0.1:80		# via Netgear's internet FW
-#use=linksys,                fw=192.168.1.1:80		# via Linksys's internet FW
-#use=maxgate-ugate3x00,      fw=192.168.0.1:80		# via MaxGate's UGATE-3x00  FW
-#use=elsa-lancom-dsl10,      fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
-#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
-#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
-#use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed Touch Pro
-#use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero Router
-#use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL Router
-#use=3com-oc-remote812,	     fw=192.168.0.254:80	# via 3com OfficeConnect Remote 812
-#use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
-#use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H DSL Router
-#
-#fw-login=admin,             fw-password=XXXXXX		# FW login and password
-#
-## To obtain an IP address from FW status page (using fw-login, fw-password)
-#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
-#
-## To obtain an IP address from Web status page (using the proxy if defined)
-#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
-#
-#use=ip,                     ip=127.0.0.1	# via static IP's
-#use=if,                     if=eth0		# via interfaces
-use=web					# via web
-#
-#protocol=dyndns2				# default protocol
-#proxy=fasthttp.sympatico.ca:80			# default proxy
-#server=members.dyndns.org			# default server
-#server=members.dyndns.org:8245			# default server (bypassing proxies)
-
-login=your-dynamic-dyndns-login			# default login
-password=your-dynamic-dyndns-password		# default password
-#mx=mx.for.your.host				# default MX
-#backupmx=yes|no				# host is primary MX?
-#wildcard=yes|no				# add wildcard CNAME?
-
-##
-## dyndns.org dynamic addresses
-##
-## (supports variables: wildcard,mx,backupmx)
-##
-server=members.dyndns.org,		\
-protocol=dyndns2			\
-your-dynamic-dyndns-host
-
-##
-## dyndns.org static addresses
-##
-## (supports variables: wildcard,mx,backupmx)
-##
-# static=yes,				\
-# server=members.dyndns.org,		\
-# protocol=dyndns2			\
-# your-static-host.dyndns.org
-
-##
-##
-## dyndns.org custom addresses
-##
-## (supports variables: wildcard,mx,backupmx)
-##
-# custom=yes,				\
-# server=members.dyndns.org,		\
-# protocol=dyndns2			\
-# your-domain.top-level,your-other-domain.top-level
-
-##
-## ZoneEdit (zoneedit.com)
-##
-# server=dynamic.zoneedit.com, 		\
-# protocol=zoneedit1,			\
-# login=your-zoneedit-login,  		\
-# password=your-zoneedit-password	\
-# your.any.domain,your-2nd.any.dom
-
-##
-## EasyDNS (easydns.com)
-##
-# server=members.easydns.com, 		\
-# protocol=easydns,			\
-# login=your-easydns-login,  		\
-# password=your-easydns-password	\
-# your.any.domain,your-2nd.any.domain
-
-##
-## Hammernode (hn.org) dynamic addresses
-##
-# server=dup.hn.org,             	\
-# protocol=hammernode1,         	\
-# login=your-hn-login,           	\
-# password=your-hn-password      	\
-# your-hn-host.hn.org,your-2nd-hn-host.hn.org
-
-##
-## dslreports.com dynamic-host monitoring
-##
-# server=members.dslreports.com		\
-# protocol=dslreports1,			\
-# login=dslreports-login,		\
-# password=dslreports-password		\
-# dslreports-unique-id
-
-##
-## OrgDNS.org account-configuration
-##
-# use=web, web=members.orgdns.org/nic/ip
-# server=www.orgdns.org 		\
-# protocol=dyndns2 			\
-# login=yourLoginName 			\
-# password=yourPassword 		\
-# yourSubdomain.orgdns.org
-
-##
-## dnspark.com
-## (supports variables: mx, mxpri)
-##
-# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:'
-# protocol=dnspark,			\
-# server=www.dnspark.com,		\
-# your-host.dnspark.com
-
-##
-## NameCheap (namecheap.com)
-##
-# protocol=namecheap,				\
-# server=dynamicdns.park-your-domain.com,	\
-# login=my-namecheap.com-login,			\
-# password=my-namecheap.com-password		\
-# myhost.namecheap.com