Mass move of uncompiled packages to abs_not_built.

The will sit here for a bit, and then will be removed completely if no one claims them.

4 files changed, 0 insertions, 411 deletions

diff --git a/abs/extra/apcupsd/PKGBUILD b/abs/extra/apcupsd/PKGBUILD
deleted file mode 100644
index ad57d1a..0000000
--- a/abs/extra/apcupsd/PKGBUILD
+++ /dev/null
@@ -1,38 +0,0 @@
-# $Id: PKGBUILD,v 1.17 2009/01/19 10:34:32 sergej Exp $
-# Maintainer: Sergej Pupykin <sergej@aur.archlinux.org>
-# Maintainer: Todd Musall <tmusall@comcast.net>
-
-pkgname=apcupsd
-pkgver=3.14.8
-pkgrel=1
-pkgdesc="Apcupsd can be used for power mangement and controlling most of APC's UPS models on Unix and Windows machines."
-arch=(i686 x86_64)
-url="http://www.apcupsd.org"
-license=('GPL')
-depends=('gcc-libs' 'gd' 'gconf')
-makedepends=('pkgconfig')
-backup=(etc/apcupsd/apcupsd.conf etc/apcupsd/hosts.conf \
-        etc/apcupsd/multimon.conf)
-source=(http://switch.dl.sf.net/sourceforge/apcupsd/$pkgname-$pkgver.tar.gz \
-	apcupsd
-	apcupsd.conf
-	run)
-
-build() {
-  cd $startdir/src/$pkgname-$pkgver
-  ./configure --prefix=/usr --enable-cgi --enable-usb --enable-net \
-              --with-upstype=usb --with-upscable=usb \
-              --with-serial-dev=/dev/usb/hid/hiddev[0-9] \
-              --enable-pthreads --enable-gapcmon
-  make || return 1
-  make DESTDIR=$startdir/pkg install || return 1
-  install -D -m755 ../apcupsd $startdir/pkg/etc/rc.d/apcupsd && \
-  chmod 755 $startdir/pkg/sbin/*
-  cp ../apcupsd.conf $startdir/pkg/etc/apcupsd/
-  mkdir -p  $startdir/pkg/etc/sv/apcupsd/supervise
-  install -D -m755 ../run $startdir/pkg/etc/sv/apcupsd
-}
-md5sums=('cd17f0a903dc2220e55ed54e242359d2'
-         '5eae3c4d921eeb81798a0250fe3dd111'
-         '2f533aec32c9445510bb2127b453b175'
-         '32ae73bc096c1d0982c12d8ec46abee2')
diff --git a/abs/extra/apcupsd/apcupsd b/abs/extra/apcupsd/apcupsd
deleted file mode 100755
index 3cd5c9d..0000000
--- a/abs/extra/apcupsd/apcupsd
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-PID=`pidof -o %PPID /sbin/apcupsd`
-case "$1" in
-  start)
-    stat_busy "Starting APCUPSD Daemon"
-    rm -f /etc/apcupsd/powerfail
-    rm -f /etc/nologin
-    [ -z "$PID" ] && /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf
-    if [ $? -gt 0 ]; then
-      stat_fail
-    else
-      PID=`pidof -o %PPID /sbin/apcupsd`
-      echo $PID > /var/run/apcupsd.pid
-      add_daemon apcupsd
-      stat_done
-    fi
-    ;;
-  stop)
-    stat_busy "Stopping APCUPSD Daemon"
-    [ ! -z "$PID" ]  && kill $PID &> /dev/null
-    if [ $? -gt 0 ]; then
-      stat_fail
-    else
-      rm /var/run/apcupsd.pid
-      rm_daemon apcupsd
-      stat_done
-    fi
-    ;;
-  restart)
-    $0 stop
-    sleep 2
-    $0 start
-    ;;
-  status)
-    /sbin/apcaccess status
-    ;;
-  *)
-    echo "usage: $0 {start|stop|restart|status}"  
-esac
-exit 0
diff --git a/abs/extra/apcupsd/apcupsd.conf b/abs/extra/apcupsd/apcupsd.conf
deleted file mode 100644
index dd60889..0000000
--- a/abs/extra/apcupsd/apcupsd.conf
+++ /dev/null
@@ -1,325 +0,0 @@
-## apcupsd.conf v1.1 ##
-# 
-#  for apcupsd release 3.14.5 (10 January 2009) - unknown
-#
-# "apcupsd" POSIX config file
-
-#
-# ========= General configuration parameters ============
-#
-
-# UPSNAME xxx
-#   Use this to give your UPS a name in log files and such. This
-#   is particulary useful if you have multiple UPSes. This does not
-#   set the EEPROM. It should be 8 characters or less.
-#UPSNAME
-
-# UPSCABLE <cable>
-#   Defines the type of cable connecting the UPS to your computer.
-#
-#   Possible generic choices for <cable> are:
-#     simple, smart, ether, usb
-#
-#   Or a specific cable model number may be used:
-#     940-0119A, 940-0127A, 940-0128A, 940-0020B,
-#     940-0020C, 940-0023A, 940-0024B, 940-0024C,
-#     940-1524C, 940-0024G, 940-0095A, 940-0095B,
-#     940-0095C, M-04-02-2000
-#
-UPSCABLE usb
-
-# To get apcupsd to work, in addition to defining the cable
-# above, you must also define a UPSTYPE, which corresponds to
-# the type of UPS you have (see the Description for more details).
-# You must also specify a DEVICE, sometimes referred to as a port.
-# For USB UPSes, please leave the DEVICE directive blank. For
-# other UPS types, you must specify an appropriate port or address.
-#
-# UPSTYPE   DEVICE           Description
-# apcsmart  /dev/tty**       Newer serial character device,
-#                            appropriate for SmartUPS models using
-#                            a serial cable (not USB).
-#
-# usb       <BLANK>          Most new UPSes are USB. A blank DEVICE
-#                            setting enables autodetection, which is
-#                            the best choice for most installations.
-#
-# net       hostname:port    Network link to a master apcupsd
-#                            through apcupsd's Network Information
-#                            Server. This is used if you don't have
-#                            a UPS directly connected to your computer.
-#
-# snmp      hostname:port:vendor:community
-#                            SNMP Network link to an SNMP-enabled
-#                            UPS device. Vendor is the MIB used by
-#                            the UPS device: can be "APC", "APC_NOTRAP"
-#                            or "RFC" where APC is the powernet MIB,
-#                            "APC_NOTRAP" is powernet with SNMP trap
-#                            catching disabled, and RFC is the IETF's 
-#                            rfc1628 UPS-MIB. You usually want "APC".
-#                            Port is usually 161. Community is usually
-#                            "private".
-#
-# dumb      /dev/tty**       Old serial character device for use 
-#                            with simple-signaling UPSes.
-#
-# pcnet    ipaddr:username:passphrase
-#                            PowerChute Network Shutdown protocol
-#                            which can be used as an alternative to SNMP
-#                            with AP9617 family of smart slot cards.
-#                            ipaddr is the IP address of the UPS mgmt
-#                            card. username and passphrase are the
-#                            credentials for which the card has been
-#                            configured.
-#
-UPSTYPE usb
-DEVICE /dev/usb/hid/hiddev[0-9]
-
-# POLLTIME <int>
-#   Interval (in seconds) at which apcupsd polls the UPS for status. This
-#   setting applies both to directly-attached UPSes (UPSTYPE apcsmart, usb, 
-#   dumb) and networked UPSes (UPSTYPE net, snmp). Lowering this setting
-#   will improve apcupsd's responsiveness to certain events at the cost of
-#   higher CPU utilization. The default of 60 is appropriate for most
-#   situations.
-#POLLTIME 60
-
-# LOCKFILE <path to lockfile>
-#   Path for device lock file. Not used on Win32.
-LOCKFILE /var/lock
-
-# SCRIPTDIR <path to script directory>
-#   Directory in which apccontrol and event scripts are located.
-SCRIPTDIR /etc/apcupsd
-
-# PWRFAILDIR <path to powerfail directory>
-#   Directory in which to write the powerfail flag file. This file
-#   is created when apcupsd initiates a system shutdown and is
-#   checked in the OS halt scripts to determine if a killpower
-#   (turning off UPS output power) is required.
-PWRFAILDIR /etc/apcupsd
-
-# NOLOGINDIR <path to nologin directory>
-#   Directory in which to write the nologin file. The existence
-#   of this flag file tells the OS to disallow new logins.
-NOLOGINDIR /etc
-
-
-#
-# ======== Configuration parameters used during power failures ==========
-#
-
-# The ONBATTERYDELAY is the time in seconds from when a power failure
-#   is detected until we react to it with an onbattery event.
-#
-#   This means that, apccontrol will be called with the powerout argument
-#   immediately when a power failure is detected.  However, the
-#   onbattery argument is passed to apccontrol only after the 
-#   ONBATTERYDELAY time.  If you don't want to be annoyed by short
-#   powerfailures, make sure that apccontrol powerout does nothing
-#   i.e. comment out the wall.
-ONBATTERYDELAY 6
-
-# 
-# Note: BATTERYLEVEL, MINUTES, and TIMEOUT work in conjunction, so
-# the first that occurs will cause the initation of a shutdown.
-#
-
-# If during a power failure, the remaining battery percentage
-# (as reported by the UPS) is below or equal to BATTERYLEVEL, 
-# apcupsd will initiate a system shutdown.
-BATTERYLEVEL 5
-
-# If during a power failure, the remaining runtime in minutes 
-# (as calculated internally by the UPS) is below or equal to MINUTES,
-# apcupsd, will initiate a system shutdown.
-MINUTES 3
-
-# If during a power failure, the UPS has run on batteries for TIMEOUT
-# many seconds or longer, apcupsd will initiate a system shutdown.
-# A value of 0 disables this timer.
-#
-#  Note, if you have a Smart UPS, you will most likely want to disable
-#    this timer by setting it to zero. That way, you UPS will continue
-#    on batteries until either the % charge remaing drops to or below BATTERYLEVEL,
-#    or the remaining battery runtime drops to or below MINUTES.  Of course,
-#    if you are testing, setting this to 60 causes a quick system shutdown
-#    if you pull the power plug.   
-#  If you have an older dumb UPS, you will want to set this to less than
-#    the time you know you can run on batteries.
-TIMEOUT 0
-
-#  Time in seconds between annoying users to signoff prior to
-#  system shutdown. 0 disables.
-ANNOY 300
-
-# Initial delay after power failure before warning users to get
-# off the system.
-ANNOYDELAY 60
-
-# The condition which determines when users are prevented from
-# logging in during a power failure.
-# NOLOGON <string> [ disable | timeout | percent | minutes | always ]
-NOLOGON disable
-
-# If KILLDELAY is non-zero, apcupsd will continue running after a
-# shutdown has been requested, and after the specified time in
-# seconds attempt to kill the power. This is for use on systems
-# where apcupsd cannot regain control after a shutdown.
-# KILLDELAY <seconds>  0 disables
-KILLDELAY 0
-
-#
-# ==== Configuration statements for Network Information Server ====
-#
-
-# NETSERVER [ on | off ] on enables, off disables the network
-#  information server. If netstatus is on, a network information
-#  server process will be started for serving the STATUS and
-#  EVENT data over the network (used by CGI programs).
-NETSERVER on
-
-# NISIP <dotted notation ip address>
-#  IP address on which NIS server will listen for incoming connections.
-#  This is useful if your server is multi-homed (has more than one
-#  network interface and IP address). Default value is 0.0.0.0 which
-#  means any incoming request will be serviced. Alternatively, you can
-#  configure this setting to any specific IP address of your server and 
-#  NIS will listen for connections only on that interface. Use the
-#  loopback address (127.0.0.1) to accept connections only from the
-#  local machine.
-NISIP 0.0.0.0
-
-# NISPORT <port> default is 3551 as registered with the IANA
-#  port to use for sending STATUS and EVENTS data over the network.
-#  It is not used unless NETSERVER is on. If you change this port,
-#  you will need to change the corresponding value in the cgi directory
-#  and rebuild the cgi programs.
-NISPORT 3551
-
-# If you want the last few EVENTS to be available over the network
-# by the network information server, you must define an EVENTSFILE.
-EVENTSFILE /var/log/apcupsd.events
-
-# EVENTSFILEMAX <kilobytes>
-#  By default, the size of the EVENTSFILE will be not be allowed to exceed
-#  10 kilobytes.  When the file grows beyond this limit, older EVENTS will
-#  be removed from the beginning of the file (first in first out).  The
-#  parameter EVENTSFILEMAX can be set to a different kilobyte value, or set
-#  to zero to allow the EVENTSFILE to grow without limit.
-EVENTSFILEMAX 10
-
-#
-# ========== Configuration statements used if sharing =============
-#            a UPS with more than one machine
-
-#
-# Remaining items are for ShareUPS (APC expansion card) ONLY
-#
-
-# UPSCLASS [ standalone | shareslave | sharemaster ]
-#   Normally standalone unless you share an UPS using an APC ShareUPS
-#   card.
-UPSCLASS standalone
-
-# UPSMODE [ disable | share ]
-#   Normally disable unless you share an UPS using an APC ShareUPS card.
-UPSMODE disable
-
-#
-# ===== Configuration statements to control apcupsd system logging ========
-#
-
-# Time interval in seconds between writing the STATUS file; 0 disables
-STATTIME 300
-
-# Location of STATUS file (written to only if STATTIME is non-zero)
-STATFILE /var/log/apcupsd.status
-
-# LOGSTATS [ on | off ] on enables, off disables
-# Note! This generates a lot of output, so if         
-#       you turn this on, be sure that the
-#       file defined in syslog.conf for LOG_NOTICE is a named pipe.
-#  You probably do not want this on.
-LOGSTATS off
-
-# Time interval in seconds between writing the DATA records to
-#   the log file. 0 disables.
-DATATIME 0
-
-# FACILITY defines the logging facility (class) for logging to syslog. 
-#          If not specified, it defaults to "daemon". This is useful 
-#          if you want to separate the data logged by apcupsd from other
-#          programs.
-#FACILITY DAEMON
-
-#
-# ========== Configuration statements used in updating the UPS EPROM =========
-#
-
-#
-# These statements are used only by apctest when choosing "Set EEPROM with conf
-# file values" from the EEPROM menu. THESE STATEMENTS HAVE NO EFFECT ON APCUPSD.
-#
-
-# UPS name, max 8 characters 
-#UPSNAME UPS_IDEN
-
-# Battery date - 8 characters
-#BATTDATE mm/dd/yy
-
-# Sensitivity to line voltage quality (H cause faster transfer to batteries)  
-# SENSITIVITY H M L        (default = H)
-#SENSITIVITY H
-
-# UPS delay after power return (seconds)
-# WAKEUP 000 060 180 300   (default = 0)
-#WAKEUP 60
-
-# UPS Grace period after request to power off (seconds)
-# SLEEP 020 180 300 600    (default = 20)
-#SLEEP 180
-
-# Low line voltage causing transfer to batteries
-# The permitted values depend on your model as defined by last letter 
-#  of FIRMWARE or APCMODEL. Some representative values are:
-#    D 106 103 100 097
-#    M 177 172 168 182
-#    A 092 090 088 086
-#    I 208 204 200 196     (default = 0 => not valid)
-#LOTRANSFER  208
-
-# High line voltage causing transfer to batteries
-# The permitted values depend on your model as defined by last letter 
-#  of FIRMWARE or APCMODEL. Some representative values are:
-#    D 127 130 133 136
-#    M 229 234 239 224
-#    A 108 110 112 114
-#    I 253 257 261 265     (default = 0 => not valid)
-#HITRANSFER 253
-
-# Battery charge needed to restore power
-# RETURNCHARGE 00 15 50 90 (default = 15)
-#RETURNCHARGE 15
-
-# Alarm delay 
-# 0 = zero delay after pwr fail, T = power fail + 30 sec, L = low battery, N = never
-# BEEPSTATE 0 T L N        (default = 0)
-#BEEPSTATE T
-
-# Low battery warning delay in minutes
-# LOWBATT 02 05 07 10      (default = 02)
-#LOWBATT 2
-
-# UPS Output voltage when running on batteries
-# The permitted values depend on your model as defined by last letter 
-#  of FIRMWARE or APCMODEL. Some representative values are:
-#    D 115
-#    M 208
-#    A 100
-#    I 230 240 220 225     (default = 0 => not valid)
-#OUTPUTVOLTS 230
-
-# Self test interval in hours 336=2 weeks, 168=1 week, ON=at power on
-# SELFTEST 336 168 ON OFF  (default = 336)
-#SELFTEST 336
diff --git a/abs/extra/apcupsd/run b/abs/extra/apcupsd/run
deleted file mode 100644
index bc5c22b..0000000
--- a/abs/extra/apcupsd/run
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-exec 2>&1
-   stat_runit "Starting APC UPS Daemon"
-      exec /sbin/apcupsd -b -f /etc/apcupsd/apcupsd.conf