Mass move of uncompiled packages to abs_not_built.

The will sit here for a bit, and then will be removed completely if no one claims them.

4 files changed, 0 insertions, 133 deletions

diff --git a/abs/extra/community/mythpywii/CONTROLS b/abs/extra/community/mythpywii/CONTROLS
deleted file mode 100644
index d733964..0000000
--- a/abs/extra/community/mythpywii/CONTROLS
+++ /dev/null
@@ -1,25 +0,0 @@
-    * Keypad : same as keypad on keyboard
-    * A : Enter (Accept, OK, next, .)
-    * Minus (-) : d (Delete)
-    * Home : escape (Exit to previous menu/exit mythfrontend)
-    * Plus (+) : p (Play/pause)
-    * 1 : Info
-    * 2 : Menu
-    * B + left : rewind to beginning of video
-    * B + twist wiimote : rewind (if twisted to the left) or fastforward
-      (otherwise) with speed dependant on twist amount.
-    * B + A + twist wiimote: timestretching . slower (if twisted left) or
-      faster (if twisted right)
-
-A comment on twisting:
-Point the wii remote at the screen, and twist from the elbow so that it
- continues to point at the screen.
-
-The maximum fastforward/rewind speed is 180x. The speeds are dictated by
-mythfrontend itself. When you rotate the wiimote, you will feel a slight
-vibration (0.05 seconds) to let you know you have gone up or down a speed
-segment. To stop fastforwarding/rewinding, simply let go of B.
-
-Beware: there is no power saving built in. However you should be able to
-turn the wiimote off (power button) when not in use, and turn it back on
-by holding down 1 and 2 to make it sync.
diff --git a/abs/extra/community/mythpywii/PKGBUILD b/abs/extra/community/mythpywii/PKGBUILD
deleted file mode 100644
index 509db19..0000000
--- a/abs/extra/community/mythpywii/PKGBUILD
+++ /dev/null
@@ -1,37 +0,0 @@
-# $Id: PKGBUILD 5936 2008-07-21 20:24:16Z thomas $
-# Maintainer: Cecil Watson<knoppmyth@gmail.com>
-
-pkgname=mythpywii
-pkgver=17
-pkgrel=9
-pkgdesc="Control MythTV using Wiimote."
-arch=('i686' 'x86_64')
-license=('GPL2')
-url="http://www.benjiegillam.com/"
-depends=('bluez' 'python-pybluez' 'cwiid-git')
-install=mythpywii.install
-source=(http://www.benjiegillam.com/code/myth_py_wii.py \
-        wiimote.rules mythpywii.install CONTROLS)
-
-. /usr/MythVantage/bin/install_functions.sh
-home_check
-
-build() {
-
-  /bin/true
-
-}
-
-package() {
-  install -D -m755 ${srcdir}/myth_py_wii.py ${startdir}/pkg/usr/bin/myth_py_wii.py || return 1
-  install -D -m644 ${srcdir}/wiimote.rules ${startdir}/pkg/etc/udev/rules.d/z90-wiimote.rules || return 1
-  install -d -o mythtv -g mythtv ${startdir}/pkg/$MYTHHOME/.cwiid/wminput || return 1
-  install -D -m755 -o mythtv -g mythtv /etc/cwiid/wminput/{acc_led,buttons,gamepad,neverball,nunchuk_stick2btn,acc_ptr,ir_ptr,nunchuk_acc_ptr} ${startdir}/pkg/$MYTHHOME/.cwiid/wminput || return 1
-  install -D -m644 ${srcdir}/CONTROLS ${startdir}/pkg/usr/share/docs/mythpywii/CONTROLS || return 1
-  cd ${startdir}/pkg$MYTHHOME/.cwiid/wminput
-  ln -s acc_led default
-}
-md5sums=('52b756c403349640c3e66f485b6c0a54'
-         '0d817a971d414b9320587a4cf289386b'
-         '18a4c2936a731191e2db92211b254b66'
-         '0872cbdb3def3dd9aa2b97b191ad76d8')
diff --git a/abs/extra/community/mythpywii/mythpywii.install b/abs/extra/community/mythpywii/mythpywii.install
deleted file mode 100644
index 76b9c6e..0000000
--- a/abs/extra/community/mythpywii/mythpywii.install
+++ /dev/null
@@ -1,65 +0,0 @@
-post_install() {
-    . /$MYTHHOME/.mythtv/mysql.txt
-    # Enable the Network Remote Control Interface for use with the wiimote.
-    # Get local machine's hostname
-      HOST=`cat /etc/hostname`
-    # Update mysql for Network Remote Control Support
-      mysql -u mythtv -pmythtv --host=${DBHostName} mythconverg -e \
-        "UPDATE settings SET data = '1' WHERE value = 'NetworkControlEnabled' AND hostname = '${HOST}'";
-      echo "------------------------------------------------------------"
-      echo "myth_py_wii.py expects the Network Control Port to be set to"
-      echo "mythtv's default port of 6546.  It will not work if you have"
-      echo "changed it to something else."
-      echo "------------------------------------------------------------"
-    # Add myth_py_wii.py to ~/mythtv/.fluxbox/apps before LinHES-run
-      sed -i '/LinHES-run/ i [startup] {/usr/bin/myth_py_wii.py >/dev/null}' /$MYTHHOME/.fluxbox/apps
-    # udev needs to pick up our new rule for the mythpywii.
-      udevadm trigger --subsystem-match="misc" --subsystem-match="bluetooth"
-    # Add the uinput module
-      modprobe uinput
-    # Ensure this module is loaded across reboots
-      echo "# uinput is needed by mythpywii" >> /etc/modules.mythvantage
-      echo "uinput" >> /etc/modules.mythvantage
-    # Bring up the bluetooth interface -- udev will do this after reboot
-      /usr/sbin/hciconfig hci0 up
-    # Punting on the multiple bluetooth adapter question.
-      echo "It is assumed your bluetooth adapter will be hci0."
-      echo "If you have more than one bluetooth adapter, you"
-      echo "may need to edit /etc/udev/rules.d/z90-wiimote.rules"
-    echo "--------------------------------------------------------------"
-    echo "--------------------------------------------------------------"
-    # Unfortunately there does not seem to be a way to do this without
-    # the user manually intervening.
-    echo "To use your wiimote you will need to restart the frontend service."
-    echo "$ sudo sv restart frontend"
-    echo "or simply reboot your machine."
-    echo "--------------------------------------------------------------"
-    echo "--------------------------------------------------------------"
-    echo "After frontend restart, you should now be able to pair your"
-    echo "Wiimote with your bluetooth adapter by pressing 1 & 2 at the"
-    echo "same time.  After a few seconds the wiimote should vibrate and the"
-    echo "LEDs will show [ # . . # ] where # is on and . is off."
-    echo "--------------------------------------------------------------"
-    echo "See /usr/share/docs/mythpywii/CONTROLS for more information."
-    echo "--------------------------------------------------------------"
-}
-
-post_remove() {
-    . /$MYTHHOME/.mythtv/mysql.txt
-    # kill myth_py_wii.py
-      WIIPID=`pidof -o %PPID /usr/bin/myth_py_wii.py`
-        [ -n "$WIIPID" ] && kill $WIIPID
-    # Remove uinput
-      sed -i '/uinput/d' /etc/modules.mythvantage
-    # Remove line in .fluxbox/apps
-      sed -i '/myth_py_wii.py/d' /$MYTHHOME/.fluxbox/apps
-    # Remove network remote control support
-      mysql -u mythtv -pmythtv --host=${DBHostName} mythconverg -e \
-        "UPDATE settings SET data = '0' WHERE value = 'NetworkControlEnabled' AND hostname = '${HOST}'";
-}
-
-if [ x$MYTHHOME = x ]
-then
-   . /etc/profile.d/MythVantage.sh
-fi
-
diff --git a/abs/extra/community/mythpywii/wiimote.rules b/abs/extra/community/mythpywii/wiimote.rules
deleted file mode 100644
index 4bb2d9d..0000000
--- a/abs/extra/community/mythpywii/wiimote.rules
+++ /dev/null
@@ -1,6 +0,0 @@
-# For Bluetooth/Wiimote
-  KERNEL=="uinput", MODE="0660", GROUP="mythtv"
-
-# Automaticly bring up/down the bluetooth interface
-  ACTION=="add", KERNEL=="hci%n", SUBSYSTEM=="bluetooth", RUN+="/usr/sbin/hciconfig hci%n up"
-  ACTION=="remove", KERNEL=="hci%n", SUBSYSTEM=="bluetooth", RUN+="/usr/sbin/hciconfig hci%n down"