lirc_085:removed obsolete

10 files changed, 0 insertions, 2677 deletions

diff --git a/abs/core/lirc_085/PKGBUILD b/abs/core/lirc_085/PKGBUILD
deleted file mode 100644
index 12dc3b4..0000000
--- a/abs/core/lirc_085/PKGBUILD
+++ /dev/null
@@ -1,86 +0,0 @@
-# $Id: PKGBUILD 14978 2008-10-11 21:04:37Z tpowa $
-# Maintainer: Paul Mattal <paul@archlinux.org>
-
-pkgname=lirc
-pkgver=0.8.5CVS
-pkgrel=17
-_kernver=2.6.28-LinHES
-pkgdesc="Linux Infrared Remote Control kernel modules for stock arch kernel"
-arch=(i686 x86_64)
-url="http://www.lirc.org/"
-license=('GPL')
-depends=('lirc-utils=0.8.5CVS' 'kernel26>=2.6.27' 'kernel26<2.6.29' 'iguanaIR')
-makedepends=('python')
-replaces=('lirc+pctv')
-options=('!makeflags')
-install=$pkgname.install
-source=(http://www.blushingpenguin.com/mark/lmilk/lirc-0.8.5-CVS-pvr150.tar.bz2 \
-	kernel-2.6.26.patch
-	kernel-2.6.27.patch
-	lirc_atiusb.patch
-	http://superb-east.dl.sourceforge.net/sourceforge/mod-mce/lirc_mod_mce-0.1.5.tar.bz2
-	lirc_mod_mce.patch
-	hw_commandir.c
-	hw_commandir.h
-	dvicoIR.rules
-        lirc.fdi)
-
-build() {
-	# configure
-	cd $startdir/src/lirc-0.8.5-CVS-pvr150 || return 1
-	cp $startdir/src/hw_commandir.* $startdir/src/lirc-0.8.5-CVS-pvr150/daemons
-#	patch -Np1 -i ../kernel-2.6.26.patch || return 1
-#	patch -Np1 -i ../kernel-2.6.27.patch || return 1
-	patch -Np1 -i ../lirc_atiusb.patch || return 1
-
-	./configure --enable-sandboxed --prefix=/usr \
-		--with-driver=all --with-kerneldir=/usr/src/linux-${_kernver}/ \
-		--with-moduledir=/lib/modules/${_kernver}/kernel/drivers/misc \
-	        --with-transmitter \
-		|| return 1
-
-	# disable parallel and bt829
-        # because of incompatibility with smp systems
-        sed -i -e "s:lirc_parallel::" -e "s:lirc_bt829::" \
-		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
-                || return 1
-	# disable lirc_gpio due to brokeness of kernel 2.6.23
-	sed -i -e "s:lirc_gpio::" \
-		Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
-                || return 1
-
-	# build
-	cd drivers || return 1
-	make || return 1
-	make DESTDIR=$startdir/pkg install || return 1
-
-	# set the kernel we've built for inside the install script
-	sed -i -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-		$startdir/lirc.install || return 1
-	cd $startdir/src/lirc_mod_mce
-	cp ../lirc-0.8.5-CVS-pvr150/drivers/lirc_dev/lirc_dev.h .
-	patch -p1 < ../lirc_mod_mce.patch
-	make KDIR=/usr/src/linux-2.6.28-LinHES/
-	cp lirc_mod_mce.ko $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/
-	mv $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/lirc_mceusb2.ko $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/lirc_mceusb2.ko.not
-	#remove old commandir
-	rm $startdir/pkg/lib/modules/$_kernver/kernel/drivers/misc/lirc_cmdir.ko
-	rm $startdir/pkg/lib/modules/$_kernver/kernel/drivers/misc/commandir.ko
-
-	# Add a udev rule for the DVICO remote so that if there is more than 
-	# one hiddev device, the system cant get confused.
-	install -D -m644 $srcdir/dvicoIR.rules $pkgdir/etc/udev/rules.d/dvicoIR.rules
-
-	# Add the fdi file to prevent the Dvico dual 4 remotes from screwing up keyboard interaction.
-	install -D -m644 $srcdir/lirc.fdi $pkgdir/usr/share/hal/fdi/preprobe/20thirdparty/lirc.fdi
-}
-md5sums=('b96dae91b566143b3af433fa2714ec9a'
-         '1753acd774f50b638e6173d364de53fd'
-         '6f151eb4e81fc7776a06c9063e6ad9a5'
-         '7eccd7826ab99e5cf1b9154171c8b927'
-         '21ce358809105f005e888e3b138c59e6'
-         'b5d52566a9dae8d76e24e8753f33abef'
-         'f059f4030afc682c9539a03bf837c1cf'
-         '4e698654cc44fc6c4163814acda5a7ee'
-         '9a3a6dc03647ee6674a166dfb884ddd6'
-         '203d9cd014c4276be4c84cecd103919d')
diff --git a/abs/core/lirc_085/dvicoIR.rules b/abs/core/lirc_085/dvicoIR.rules
deleted file mode 100644
index ada5466..0000000
--- a/abs/core/lirc_085/dvicoIR.rules
+++ /dev/null
@@ -1,15 +0,0 @@
-# This rule is for the Dvico Dual Digital 4 Rev 2. It has 2 IR modules 
-# identified, only the first of which is connected to the receiver.
-# The KERNELS=="*-1" part of this rule makes sure that the first 
-# device is the one that gets the symlink.
-KERNEL=="event*", \
-    KERNELS=="*-1", \
-    ATTRS{manufacturer}=="Dvico", \
-    ATTRS{idVendor}=="0fe9", \
-    ATTRS{idProduct}=="db98", \
-    SYMLINK="input/irremote"
-
-# This rule is for the older style USB DVICO remote dongles.
-SUBSYSTEMS=="usb", KERNEL=="hiddev*", \
-    ATTRS{product}=="DVICO USB HID Remocon V1.00", \
-    SYMLINK+="usb/dvicoIR"
diff --git a/abs/core/lirc_085/hw_commandir.c b/abs/core/lirc_085/hw_commandir.c
deleted file mode 100755
index 40ac0de..0000000
--- a/abs/core/lirc_085/hw_commandir.c
+++ /dev/null
@@ -1,1926 +0,0 @@
-/* CommandIR transceivers driver 0.96
- * Supporting CommandIR II and CommandIR Mini (and multiple of both)
- * April-June 2008, Matthew Bodkin
- * December 2008, bug fixes, Matthew Bodkin
- */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <limits.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-#include <sys/wait.h>
-#include <sys/un.h>
-#include <sys/utsname.h>
-
-#include "hardware.h"
-#include "ir_remote.h"
-#include "lircd.h"
-#include "receive.h"
-#include "transmit.h"
-#include "hw_commandir.h"
-#include <usb.h>
-
-#define RAPID_DECODE 1
-
-extern struct ir_remote *repeat_remote;
-extern char *progname;
-
-
-/**********************************************************************
- *
- * internal function prototypes
- *
- **********************************************************************/
-static int commandir_init();
-static int commandir_deinit(void);
-static char *commandir_rec(struct ir_remote *remotes);
-static void commandir_read_loop();
-static int cmdir_convert_RX(unsigned char *orig_rxbuffer);
-static unsigned int get_time_value(unsigned int firstint, 
-		unsigned int secondint, unsigned char overflow);
-static lirc_t commandir_readdata(lirc_t timeout);
-static int commandir_send(struct ir_remote *remote,struct ir_ncode *code);
-static int commandir_ioctl(unsigned int cmd, void *arg);
-//static void setEmitterMask(unsigned char highbyte, unsigned char lowbyte);
-static void setEmitterMask(int bitmask);
-static void commandir_transmit(char *buffer, int bytes, int bitmask, 
-		unsigned int);
-static void commandir_child_init();
-static void shutdown_usb();
-static void hardware_scan();
-static void hardware_disconnect(int);
-static void hardware_setorder();
-static void raise_event(unsigned int);
-static int commandir_read();
-static int check_irsend_commandir(unsigned char *command);
-static int commandir_decode(char *command);
-static int commandir_receive_decode(struct ir_remote *remote,
-                   ir_code *prep,ir_code *codep,ir_code *postp,
-                   int *repeat_flagp,
-                   lirc_t *min_remaining_gapp, lirc_t *max_remaining_gapp);
-static void pipeline_check();
-static int inline get_bit(int bitnum);
-static void add_to_tx_pipeline(unsigned char *buffer, int bytes, 
-		int channel_mask, unsigned int);
-static void recalc_tx_available(int);
-static void set_hash_mask(int channel_mask);
-static int commandir2_convert_RX(unsigned short *bufferrx, 
-		unsigned char numvalues);
-static void cleanup_commandir_dev(int spotnum);
-
-/**********************************************************************
- *
- * CommandIR Vars
- *
- **********************************************************************/
-static int current_transmitter_mask = 0xff;
-static char unsigned commandir_data_buffer[512];
-static int last_mc_time = -1;	
-static int commandir_rx_num = 0;
-
-
-static char channels_en[MAX_DEVICES]; 
-static char open_bus_hash[USB_MAX_BUSES][USB_MAX_BUSDEV];
-static int tx_order[MAX_DEVICES];
-static char device_count = 0;
-static int mini_freq[MAX_DEVICES];
-static int child_pipe_write = 0;
-static char haveInited = 0;
-// Fake 'commandir' remote signal values
-static unsigned int signal_base[2][2] = { {100|PULSE_BIT, 200},
-		 {1000|PULSE_BIT, 200} };
-
-// Pipes to and from the child/parent
-static pid_t child_pid = -1;
-static int pipe_fd[2] = { -1, -1 };
-static int pipe_tochild[2] = { -1, -1 };
-static int tochild_read = -1, tochild_write = -1;
-
-struct commandir_device
-{
-	usb_dev_handle *cmdir_udev;
-	int bus;
-	int busdev;
-	int interface;
-	int location;
-	int hw_type;
-	int hw_revision;
-	int hw_subversion;
-	unsigned char devnum;
-	int endpoint_max[3];
-} open_commandir_devices[4];
-
-struct hardware hw_commandir =
-{
-	NULL,					 	/* default device */
-	-1,                 		/* fd */
-	LIRC_CAN_SET_SEND_CARRIER|
-	LIRC_CAN_SEND_PULSE|
-	LIRC_CAN_SET_TRANSMITTER_MASK|
-	LIRC_CAN_REC_MODE2, 		
-	LIRC_MODE_PULSE,			/* send_mode */ 
-	LIRC_MODE_MODE2,            /* rec_mode */
-	sizeof(lirc_t),        		/* code_length in BITS */
-	commandir_init,       		/* init_func */
-	NULL,     			  		/* config_func */
-	commandir_deinit,     		/* deinit_func */
-	commandir_send,				/* send_func */
- 	commandir_rec,        		/* rec_func  */
-	commandir_receive_decode,   /* decode_func */
-	commandir_ioctl,            /* ioctl_func */
-	commandir_readdata,		    /* readdata */
-	"commandir"
-};
-
-/***   LIRC Interface Functions - Non-blocking parent thread
-*/
-
-static int commandir_receive_decode(struct ir_remote *remote,
-                   ir_code *prep,ir_code *codep,ir_code *postp,
-                   int *repeat_flagp,
-                   lirc_t *min_remaining_gapp, lirc_t *max_remaining_gapp) {
-
-	int i;
-	i = receive_decode(remote,
-                   prep,codep,postp,
-                   repeat_flagp,
-                   min_remaining_gapp, max_remaining_gapp);
-
-	if(i > 0){
-		static char rx_char[3] = {3, 0, RXDECODE_HEADER_LIRC};
-		write(tochild_write, rx_char, 3);	
-	}
-	
-	return i;
-}
-
-
-static int commandir_init()
-{
-	long fd_flags;
-	if(haveInited){
-		static char init_char[3] = {3, 0, INIT_HEADER_LIRC};
-		write(tochild_write, init_char, 3);	
-		return 1;
-	}
-	
-	init_rec_buffer();	// LIRC's rec
-	init_send_buffer();	// LIRC's send
-	
-	/* A separate process will be forked to read data from the USB
-	 * receiver and write it to a pipe. hw.fd is set to the readable
-	 * end of this pipe. */
-	if (pipe(pipe_fd) != 0)
-	{
-		logprintf(LOG_ERR, "couldn't open pipe 1");
-		return 0;
-	}
-	
-	hw.fd = pipe_fd[0];	// the READ end of the Pipe
-	
-	if (pipe(pipe_tochild) != 0)
-	{
-		logprintf(LOG_ERR, "couldn't open pipe 1");
-		return 0;
-	}
-	
-	tochild_read = pipe_tochild[0];	// the READ end of the Pipe 
-	tochild_write = pipe_tochild[1];	// the WRITE end of the Pipe 
-	
-	fd_flags = fcntl(pipe_tochild[0], F_GETFL);
-  	if(fcntl(pipe_tochild[0], F_SETFL, fd_flags | O_NONBLOCK) == -1)
-	{
-		logprintf(LOG_ERR, "can't set pipe to non-blocking");
-		return 0;
-	}	
-	
-	child_pid= fork();
-	if (child_pid== -1)
-	{
-		logprintf(LOG_ERR, "couldn't fork child process");
-		return 0;
-	}
-	else if (child_pid== 0)
-	{
-		child_pipe_write = pipe_fd[1];	
-		commandir_child_init();
-		commandir_read_loop();
-		return 0;	
-	}
-	haveInited = 1;
-	
-	logprintf(LOG_ERR, "CommandIR driver initialized");
-	return 1;	
-}
-
-
-static int commandir_deinit(void)
-{
-	/* Trying something a bit new with this driver. Keeping the driver
-	 * connected so in the future we can still monitor in the client */
-	if(USB_KEEP_WARM && (!strncmp(progname, "lircd", 5)))
-	{
-		static char deinit_char[3] = {3, 0, DEINIT_HEADER_LIRC};
-		write(tochild_write, deinit_char, 3);
-		logprintf(LOG_ERR, "LIRC_deinit but keeping warm");
-	}
-	else
-	{
-		if (tochild_read >= 0)
-		{
-			if (close(tochild_read) < 0) 
-			{
-				logprintf(LOG_ERR, "Error closing pipe2");;
-			}
-			tochild_read = tochild_write = -1;
-		}
-		
-		if(haveInited){
-			// shutdown all USB
-			if(child_pid > 0)
-			{
-				logprintf(LOG_ERR, "Closing child process");
-				kill(child_pid, SIGTERM);
-				waitpid(child_pid, NULL, 0);
-				child_pid = -1;
-				haveInited = 0;
-			}
-		}
-		
-		if (hw.fd >= 0)
-		{
-			if (close(hw.fd) < 0) logprintf(LOG_ERR, "Error closing pipe");
-			hw.fd = -1;
-		}
-		
-		logprintf(LOG_ERR, "commandir_deinit()");
-	}
-	return(1);
-}
-
-static int commandir_send(struct ir_remote *remote,struct ir_ncode *code)
-{
-	int length;
-	lirc_t *signals;
-
-	if(!init_send(remote,code)) {
-		return 0;
-	}
-
-	length = send_buffer.wptr;
-	signals = send_buffer.data;
-
-	if (length <= 0 || signals == NULL) {
-		return 0;
-	}
-	
-	int cmdir_cnt =0;
-	char cmdir_char[70];
-	
-	// Set the frequency of the signal along with the signal + transmitters
-	cmdir_char[0] = 7;
-	cmdir_char[1] = 0;
-
-	cmdir_char[2] = FREQ_HEADER_LIRC;
-	cmdir_char[3] = (remote->freq >> 24) & (0xff);
-	cmdir_char[4] = (remote->freq >> 16) & (0xff);
-	cmdir_char[5] = (remote->freq >> 8) & (0xff);
-	cmdir_char[6] = (remote->freq & 0xff);
-	
-	write(tochild_write, cmdir_char, cmdir_char[0]);
-
-	cmdir_cnt = 3;
-	
-	unsigned char * send_signals = malloc(sizeof(signals) * length + 4);
-	
-	send_signals[0] = (sizeof(lirc_t) * length + 4) & 0xff;
-	send_signals[1] = ((sizeof(lirc_t) * length + 4) >> 8) & 0xff;
-	
-	send_signals[2] = TX_LIRC_T;
-	send_signals[3] = (char)current_transmitter_mask;	
-	
-	memcpy(&send_signals[4], signals, sizeof(lirc_t) * length);
-	
-	if(write(tochild_write, send_signals, 
-		send_signals[0] + send_signals[1] * 256) < 0)
-	{
-		logprintf(LOG_ERR, "Error writing to child_write");
-	}
-	
-	free(send_signals);
-	return(length);
-}
-
-static char *commandir_rec(struct ir_remote *remotes)
-{
-	char * returnit;
-	if (!clear_rec_buffer()) return NULL;
-	returnit = decode_all(remotes);
-	return returnit;
-}
-
-static int commandir_ioctl(unsigned int cmd, void *arg)
-{
-	unsigned int ivalue;
-	char cmdir_char[5];
-	
-	switch(cmd)
-	{
-	case LIRC_SET_TRANSMITTER_MASK:
-		
-		ivalue=*(unsigned int*)arg;
-		
-		if(ivalue >= MAX_MASK) return (MAX_CHANNELS);
-		
-		/* Support the old way of setting the frequency of the signal along 
-		 * with the signal + transmitters */
-		cmdir_char[0] = 5;
-		cmdir_char[1] = 0;
-		cmdir_char[2] = CHANNEL_EN_MASK;
-		cmdir_char[3] = (unsigned char)(ivalue & 0x00FF);	// Low bits
-		cmdir_char[4] = (unsigned char)(ivalue >> 8);		// High bits
-		
-		write(tochild_write, cmdir_char, cmdir_char[0]);
-
-		return (0);
-		
-	default:
-		logprintf(LOG_ERR, "Unknown ioctl - %d", cmd);
-		return(-1);
-	}
-	
-	return 1;
-}
-
-static lirc_t commandir_readdata(lirc_t timeout)
-{
-	lirc_t code = 0;
-	struct timeval tv = {0, timeout};
-	fd_set fds;
-
-	FD_ZERO(&fds);
-	FD_SET(hw.fd, &fds);
-
-	/* attempt a read with a timeout using select */
-	if (select(hw.fd + 1, &fds, NULL, &fds, &tv) > 0)
-		/* if we failed to get data return 0 */
-		if (read(hw.fd, &code, sizeof(lirc_t)) <= 0)
-                        commandir_deinit();
-	return code;
-}
-
-/***  End of parent fork / LIRC accessible functions  */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-/***  CommandIR Client Process Functions (Handle all USB operations)
- */
- 
-int channels_space_available[MAX_CHANNELS]; 
-int channels_space_updated = 0; // last updated time
-
-char * signalq[MAX_SIGNALQ];	// how many signals can be queued
-int signalq_len[MAX_SIGNALQ];
-int signalq_bitmask[MAX_SIGNALQ];
-unsigned int signalq_frequency[MAX_SIGNALQ];
-
-int top_signalq = -1;
-int next_signalq_per_channel[MAX_CHANNELS];	
-
-unsigned char commandir_tx_start[MAX_CHANNELS*4];
-unsigned char commandir_tx_end[MAX_CHANNELS*4];
-unsigned char commandir_tx_available[MAX_CHANNELS];
-unsigned char lastSendSignalID[MAX_CHANNELS];
-unsigned char commandir_last_signal_id[MAX_CHANNELS];
-
-
-// Global variables to convert channel masks to consistant easier formats
-unsigned char hash_mask[MAX_CHANNELS];
-unsigned char selected_channels[MAX_CHANNELS];
-unsigned char total_selected_channels = 0;
-int shutdown_pending = 0;
-int read_delay = WAIT_BETWEEN_READS_US;
-int insert_fast_zeros = 0;
-
-int rx_hold = 0;
-
-// This is the only one for pre-pipelinging
-int pre_pipeline_emitter_mask = 0x000f; // default tx on only first CommandIR
-
-
-static void pipeline_check()
-{
-	/* Transmit from the pipeline if it's time and there's space
-	 * what's available should now be updated in the main_loop
-	 */
-	
-	int i,j,k;
-	
-	i=0;
-	if(top_signalq < 0) return;
-	
-	while(i <= top_signalq)
-	{
-
-		// Are ALL the channels this signal should TX on currently available?
-		int oktosend = 1;
-		set_hash_mask( signalq_bitmask[ i ] );
-		for(j = 0; j<total_selected_channels; j++)
-		{
-			if(commandir_tx_available[ selected_channels[j] ] < 
-				(36 + (signalq_len[ i ])/sizeof(lirc_t)))	
-			{
-				oktosend = 0;
-				break;
-			}
-		}
-		
-		if(oktosend)
-		{
-			// great, TX this on all the channels.
-			
-			commandir_transmit(signalq[ i ], signalq_len[ i ], signalq_bitmask[ i ], signalq_frequency[ i ]);
-			
-			for(j = 0; j<total_selected_channels; j++)
-			{
-				/*  commandir_tx_available[ selected_channels[j] ] -= 
-					(64 + (signalq_len[ i ])/sizeof(lirc_t));  */
-				commandir_tx_available[ selected_channels[j] ] = 0; 
-			}
-			
-			/* Free up the memory, and see if there are new next_signalq's 
-			 * (any more for this channel to TX)
-			 */
-			free(signalq[i]);
-			
-			for(k=i; k<top_signalq; k++)
-			{
-				signalq[k] = signalq[k+1];
-				signalq_len[k] = signalq_len[k+1];
-				signalq_bitmask[k] = signalq_bitmask[k+1];
-				signalq_frequency[k] = signalq_frequency[k+1];
-			}
-			top_signalq--;
-		}
-		else
-		{
-			i++;
-		}
-	}
-}
-
-static int get_bit(int bitnum)
-{
-	int r = 1;
-	return r << bitnum; // bit 0 is 1, bit 1 is 10, bit 2 is 100...
-}
-
-static void add_to_tx_pipeline(unsigned char *buffer, int bytes, 
-	int channel_mask, unsigned int frequency)
-{
-	/* *buffer points to a buffer that will be OVERWRITTEN; malloc our copy.
-	 * buffer is a LIRC_T packet for CommandIR 
-	 */
-	top_signalq++;
-	if(top_signalq > MAX_SIGNALQ)
-	{
-		logprintf(LOG_ERR, "Too many signals in queue: > %d", MAX_SIGNALQ);
-		return;
-	}
-	
-	signalq[top_signalq] = malloc(bytes);
-	
-	signalq_len[top_signalq] = bytes;
-	signalq_bitmask[top_signalq] = channel_mask;
-	signalq_frequency[top_signalq] = frequency;
-	
-	lirc_t *oldsignal, *newsignal;
-	int x, pulse_now = 1;
-	int projected_signal_length;
-	short aPCAFOM = 0;
-	float afPCAFOM = 0.0;
-	int difference = 0;
-					
-	afPCAFOM = (6000000.0 / ((frequency > 0) ? frequency : DEFAULT_FREQ)  ) ; 
-	aPCAFOM = afPCAFOM;
-	
-	// Trim off mid-modulation pulse fragments, add to space for exact signals
-	for(x=0; x<(bytes/sizeof(lirc_t)); x++)
-	{
-		oldsignal = (lirc_t *)&buffer[x*sizeof(lirc_t)];
-		newsignal = (lirc_t *)signalq[top_signalq];
-		newsignal += x;
-		
-		if(pulse_now==1){
-			projected_signal_length =  
-				(((int)( (*oldsignal * 12)/( afPCAFOM ) ))  * aPCAFOM) / 12;
-			difference = *oldsignal - projected_signal_length;
-			// take off difference plus 1 full FOM cycle
-			*newsignal = *oldsignal - difference - (aPCAFOM / 12);	
-			
-		}
-		else
-		{
-			if(difference != 0)
-			{
-				// Add anything subtracted from the pulse to the space
-				*newsignal = *oldsignal + difference + (aPCAFOM / 12);
-				difference = 0;
-			}
-		
-		}
-		
-		pulse_now++;
-		if(pulse_now > 1) pulse_now = 0;
-	}
-	
-	return;
-}
-
-static void recalc_tx_available(int which_commandir)
-{
-	int i;
-	int length = 0;
-	static int failsafe = 0;
-	
-	if(lastSendSignalID[which_commandir] != 
-		commandir_last_signal_id[which_commandir])
-	{
-		/* INNOVATIONONE_FLAG:REMOVE  This will be removed pending testing
-		 * for a future release
-		 */
-		if(failsafe++ < 1000)
-		{
-			return;
-		}
-		logprintf(LOG_ERR, "Error: required the failsafe");
-	}
-	
-	failsafe = 0;
-	for(i=which_commandir*4; i<((which_commandir+1)*4); i++)
-	{
-		length = commandir_tx_end[i] - commandir_tx_start[i];
-		if(length < 0) length += 0xff;
-		
-		if(commandir_tx_available[i] < 0xff - length)
-			commandir_tx_available[i] = 0xff - length;
-			
-	}
-}
-
-static void set_hash_mask(int channel_mask) // eg, 8
-{
-	// bitwise set of hash_mask for easier coding...
-	int i,j;
-	j=channel_mask;
-	total_selected_channels = 0;
-	for(i=0; i<MAX_CHANNELS; i++)
-	{
-		hash_mask[i] = j & 0x01;
-		j = j >> 1;
-		if(hash_mask[i])
-			selected_channels[total_selected_channels++] = i;
-	}
-}
-
-
-static void commandir_transmit(char *buffer, int bytes, int bitmask, 
-	unsigned int frequency)
-{
-	/*** Send a TX command to 1 or more CommandIRs.
-	 * Keep in mind: TX frequency, TX channels, TX signal length, 
-	 * which CommandIR, & what hardware version
-	 */
-	
-	int send_status;
-	unsigned char packet[TX_BUFFER_SIZE];
-	/* So we know where there should be gaps between signals and more 
-	 * importantly, where there shouldn't be
-	 */
-	static char signalid = 1;	
-	
-	/* Depending on the tx channels, then depending on what hardware it is, 
-	 * set the freq if needed, and send the buffer with the channel header 
-	 * that's right for that CommandIR
-	 */
-	
-	int devicenum = 0;
-	int sent = 0, tosend = 0;
-	unsigned char mini_tx_mask = 0;
-	lirc_t * signals;	// have bytes/sizeof(lirc_t) signals
-	signals = (lirc_t *)buffer;
-	int total_signals = 0;
-	int i;
-	char cmdir_char[66];
-	int which_signal = 0;
-	
-	total_signals = bytes / sizeof(lirc_t);
-	
-	setEmitterMask(bitmask);
-	
-	for(devicenum = 0; devicenum < device_count; devicenum++)
-	{
-		// Do we transmit on any channels on this device?
-		if(channels_en[ devicenum ])
-		{
-			which_signal = 0;
-			switch(open_commandir_devices[ tx_order[devicenum] ].hw_type)
-			{
-				case HW_COMMANDIR_2:
-					
-					mini_tx_mask = 0;
-					// Short enough loop to unroll
-					if(channels_en[ devicenum ] & 1) mini_tx_mask |= 0x10;
-					if(channels_en[ devicenum ] & 2) mini_tx_mask |= 0x20;
-					if(channels_en[ devicenum ] & 4) mini_tx_mask |= 0x40;
-					if(channels_en[ devicenum ] & 8) mini_tx_mask |= 0x80;
-					
-					packet[1] = TX_COMMANDIR_II;
-					packet[2] = mini_tx_mask;
-					
-					short PCAFOM = 0;
-					float fPCAFOM = 0.0;
-					
-					if(bytes/sizeof(lirc_t) > 255)
-					{
-						logprintf(LOG_ERR, "Error: signal over max size");
-						continue; 
-					}
-					
-					fPCAFOM = (6000000 / ((frequency > 0) ? frequency : 
-						DEFAULT_FREQ)  ) ; 
-					PCAFOM = fPCAFOM;
-					
-					lastSendSignalID[  tx_order[devicenum]   ] = packet[5] = (getpid() + signalid++) + 1;	
-					
-					packet[4] = PCAFOM & 0xff;
-					packet[3] = (PCAFOM >> 8) & 0xff;					
-					
-					short packlets_to_send = 0, sending_this_time = 0;
-					
-					packlets_to_send = bytes / sizeof(lirc_t);
-					
-					int attempts;
-					for(attempts = 0; attempts < 10; attempts++)
-					{
-					
-						if((packlets_to_send*3 + 7) > open_commandir_devices[ tx_order[devicenum] ].endpoint_max[1])
-						{
-							sending_this_time = open_commandir_devices[ tx_order[devicenum] ].endpoint_max[1]/3 - 3;
-						}
-						else
-						{
-							sending_this_time = packlets_to_send;
-						}
-						int sending;
-
-						for(i=0; i<sending_this_time; i++)
-						{
-							sending = signals[which_signal++];
-							
-							packet[i*3+7] = sending >> 8; // high1
-							packet[i*3+8] = sending & 0xff; // low
-							packet[i*3+9] = sending >> 16 & 0xff; // high2
-						}
-						
-						packet[0] = (sending_this_time * 3 + 7);
-						packet[6] = (sending_this_time == packlets_to_send)  ? 0xcb :  0x00;
-						
-						send_status=usb_bulk_write(
-							open_commandir_devices[ tx_order[devicenum] ].cmdir_udev, 
-							2, // endpoint2
-							(char*)packet,
-							packet[0], 
-							USB_TIMEOUT_MS);
-						if(send_status < 0)
-						{
-							// Error transmitting.
-							hardware_scan();
-							return;
-						}
-						
-						packlets_to_send -= ((send_status - 7) / 3);
-						if(!packlets_to_send)
-						{
-							// "No more packlets to send\n"
-							break;
-						}
-					}
-					continue; // for transmitting on next CommandIR device
-					
-			
-				case HW_COMMANDIR_MINI:
-					mini_tx_mask = 0;
-					if(channels_en[ devicenum ] & 1) mini_tx_mask |= 0x80;
-					if(channels_en[ devicenum ] & 2) mini_tx_mask |= 0x40;
-					if(channels_en[ devicenum ] & 4) mini_tx_mask |= 0x20;
-					if(channels_en[ devicenum ] & 8) mini_tx_mask |= 0x10;
-					
-					char freqPulseWidth = DEFAULT_PULSE_WIDTH;
-					
-					freqPulseWidth = (unsigned char)((1000000 / 
-						((frequency > 0) ? frequency: DEFAULT_FREQ)  ) / 2);
-					
-					if(freqPulseWidth == 0)
-					{
-						freqPulseWidth = DEFAULT_PULSE_WIDTH;
-					}
-					
-					if(mini_freq[ tx_order[devicenum] ] != freqPulseWidth)
-					{
-						// Update the CommandIR Mini's next tx frequency
-						cmdir_char[0] = FREQ_HEADER;
-						cmdir_char[1] = freqPulseWidth;
-						cmdir_char[2] = 0;
-						mini_freq[ tx_order[devicenum] ] = freqPulseWidth;
-						send_status=usb_bulk_write(
-							open_commandir_devices[ tx_order[devicenum] ].cmdir_udev, 
-							2, // endpoint2
-							cmdir_char,
-							2, // 2 bytes
-							USB_TIMEOUT_MS);
-						if(send_status < 2)
-						{
-							// Error transmitting.
-							hardware_scan();
-							return ;
-						}
- 					}
-					
-					unsigned int mod_signal_length=0;
-					
-					cmdir_char[0] = TX_HEADER_NEW;
- 					cmdir_char[1] = mini_tx_mask;
-					
-					unsigned int hibyte, lobyte;
-
-					sent = 0;
-					which_signal = 0;
-					while(sent < (bytes / sizeof(lirc_t) * 2 ) )
-					{
- 						tosend = (bytes / sizeof(lirc_t) * 2 ) - sent;
-						
-						if(tosend > (MAX_HW_MINI_PACKET - 2))
-						{
-							tosend = MAX_HW_MINI_PACKET - 2;
-						}
-						
-						for(i=0;i<(tosend/2);i++) // 2 bytes per CommandIR pkt
-						{
-							mod_signal_length = signals[which_signal++] >> 3;
-							hibyte = mod_signal_length/256;
-							lobyte = mod_signal_length%256;
-							cmdir_char[i*2+3] = lobyte;
-							cmdir_char[i*2+2] = hibyte;
-						}
-
-						send_status=usb_bulk_write(
-							open_commandir_devices[ tx_order[devicenum] ].cmdir_udev, 
-							2, // endpoint2
-							cmdir_char,
-							tosend + 2, 
-							USB_TIMEOUT_MS);
-						if(send_status < 1)
-						{
-							// Error transmitting.
-							hardware_scan();
-							return;
-						}
-						sent += tosend;
-					} // while unsent data
-					continue; // for transmitting on next CommandIR device
-				default:
-					logprintf(LOG_ERR, "Unknown hardware: %d", 
-						open_commandir_devices[tx_order[devicenum]].hw_type);
-			} // hardware switch()
-		} // if we should tx on this device
-	} // for each device we have
-}
-
-
-static void commandir_child_init()
-{
-	alarm(0);
-	signal(SIGTERM, shutdown_usb);
-	signal(SIGPIPE, SIG_DFL);
-	signal(SIGINT, shutdown_usb);
-	signal(SIGHUP, SIG_IGN);
-	signal(SIGALRM, SIG_IGN);
-	
-	logprintf(LOG_ERR, "Child Initializing CommandIR Hardware");
-	
-	usb_init();
-	int i;
-	for(i=0;i<MAX_CHANNELS;i++)
-	{
-		next_signalq_per_channel[i] = -1;
-		channels_en[i] = 0xff;
-	}
-/*	
-	// Check kernel version: support fast decoding
-	char checkV[] = {0,0,0,0,0,0,0,0,0,0};
-	FILE * checkfile;
-	int kernel_major = 0, kernel_minor = 0;
-	
-	checkfile=fopen("/proc/sys/kernel/osrelease", "r");
-	if(checkfile!=NULL)
-	{
-		fgets(checkV, 7, checkfile);
-		printf("Checking: %s.\n", checkV);
-		printf("Version checking %s.\n", &checkV[4]);
-		kernel_major = atoi(&checkV[2]);
-		kernel_minor = atoi(&checkV[4]);
-		printf("Major is: %d, minor is %d.\n", kernel_major, kernel_minor);
-		fclose(checkfile);
-	}
-	
-	if(kernel_major < 6){
-		insert_fast_zeros = 0;
-		logprintf(LOG_ERR, "Fast decoding disabled");
-	}
-	else
-	{
-		if(kernel_minor <= 24)
-		{
-			logprintf(LOG_ERR, "Fast decoding enabled (1)");
-			insert_fast_zeros = 1;
-		}
-		else
-		{
-			logprintf(LOG_ERR, "Fast decoding enabled");
-			insert_fast_zeros = 2;
-		}
-	}*/
-	hardware_scan();
-}
-
-static void hardware_disconnect(int commandir_spot)
-{
-	/* We had a read/write error, try disconnecting it and force _scan to 
-	 * reconnect - otherwise we may get perpetual read/write errors
-	 */
-	
-	int x;
-	
-	//	reset the hash so we don't try and disconnect this device again
-	//  device_count is decremented here
-	cleanup_commandir_dev(commandir_spot);
-	
-	raise_event(COMMANDIR_UNPLUG_1 + commandir_spot);
-	
-	/* Cases are:
-	removing device 0 when there's no more device (do nothing)
-	removing device < MAX when there's still 1+ devices (patch up)
-	removing device==MAX when there's more devices (do nothing)
-	*/
-	
-	// new device count-- from cleanup (if device_count > 0 AND commandir removed isn't 0 or max)
-	if( (device_count > 0) && (commandir_spot != device_count) )
-	{
-		/* It wasn't the top device removed, and there's 
-			* more than 1 device, so we have some vars to patch up
-			*/
-		for(x=commandir_spot; x<(device_count); x++)
-		{
-			channels_en[x] = channels_en[x+1];
-			mini_freq[x] = mini_freq[x+1];
-			commandir_last_signal_id[x] = commandir_last_signal_id[x+1];
-			lastSendSignalID[x] = lastSendSignalID[x+1];
-			memcpy(&open_commandir_devices[x], 
-				&open_commandir_devices[x+1], 
-				sizeof(struct commandir_device));	
-		}
-	
-	// Reset the TOP one that was just removed:
-		channels_en[(int)device_count] = 0x0f;
-		mini_freq[(int)device_count] = -1;
-		commandir_last_signal_id[(int)device_count] = 0;
-		lastSendSignalID[(int)device_count] = 0;
-		open_commandir_devices[(int)device_count].cmdir_udev = 0;
-		open_commandir_devices[(int)device_count].bus = 0;
-		open_commandir_devices[(int)device_count].busdev = 0;
-		open_commandir_devices[(int)device_count].interface = 0; 
-		open_commandir_devices[(int)device_count].hw_type = 0;
-		open_commandir_devices[(int)device_count].hw_revision = 0;
-		open_commandir_devices[(int)device_count].hw_subversion = 0;
-		
-	}
-	
-	if(commandir_rx_num>=commandir_spot)
-	{
-		commandir_rx_num--;	
-	}
-
-	hardware_setorder();
-}
-
-static void hardware_setorder(){
-	/* Tried to order to the detected CommandIRs based on bus and dev ids
-		* so they remain the same on reboot.  Adding a new device in front
-		* will mean it becomes device 0 and emitters or scripts must be fixed
-		* Need a different param, these still change. 
-		*/
-		
-	tx_order[0] = tx_order[1] = tx_order[2] = tx_order[3] = 0; 
-	mini_freq[0] = mini_freq[1] = mini_freq[2] = mini_freq[3] = -1;
-	int largest = 0;
-	int tmpvals[4];
-	int x, tx_spots, find_spot;
-	
-	for(x=0; x<device_count; x++)
-	{
-		tmpvals[x] = 256 * open_commandir_devices[x].bus + 
-			open_commandir_devices[x].busdev;
-	}
-	
-	for(tx_spots = 0; tx_spots < device_count; tx_spots++)
-	{
-		largest = 0;
-		for(find_spot = 0; find_spot < device_count; find_spot++)
-		{
-			if(tmpvals[find_spot] > tmpvals[largest])
-			{
-				largest = find_spot;
-			}
-		}
-		tx_order[device_count - tx_spots - 1 ] = largest;
-		tmpvals[largest] = 0;
-	}
-	
-	
-	// The formerly receiving CommandIR has been unplugged
-	if(commandir_rx_num < 0)
-	{
-		if(device_count > 0)
-			commandir_rx_num = 0;
-	}
-	
-	// Clear all pending signals
-	for(x=top_signalq; x >= 0; x--)
-	{
-		free(signalq[top_signalq]);
-	}
-	top_signalq = -1;
-	
-}
-
-static void cleanup_commandir_dev(int spotnum)
-{
-	int location, devnum;
-
-	location = open_commandir_devices[spotnum].location;
-	devnum = open_commandir_devices[spotnum].devnum;
-
-  open_bus_hash[ location ][ devnum ] = 0;
-	device_count--;	
-  
-	if(open_commandir_devices[spotnum].cmdir_udev==NULL)
-	{
-		return;
-	}
-	usb_release_interface(open_commandir_devices[spotnum].cmdir_udev, 
-		open_commandir_devices[spotnum].interface);
-	usb_close(open_commandir_devices[spotnum].cmdir_udev);
-	open_commandir_devices[spotnum].cmdir_udev = NULL;
-}
-
-
-static void hardware_scan()
-{
-	// Scan for hardware changes; libusb doesn't notify us...
-	unsigned char located = 0;
-	struct usb_bus *bus = 0;
-	struct usb_device *dev = 0;
-	
-	int scan_find[MAX_DEVICES][2]; // [0]=bus#, [1]=busdev#
-	unsigned char found = 0;
-	// Using hash for performance instead of memory conservation (+1k)
-	unsigned char still_found[USB_MAX_BUSES][USB_MAX_BUSDEV];
-	unsigned changed = 0;
-	int find_spot = 0;
-	
-	usb_find_busses();
-	usb_find_devices();
- 	
- 	for (bus = usb_busses; bus; bus = bus->next)
-	{
-		for (dev = bus->devices; dev; dev = dev->next)	
-		{
-			if (dev->descriptor.idVendor == USB_CMDIR_VENDOR_ID) 
-			{
-				located++;
-				// Do we already know about it?
-				if(!open_bus_hash[bus->location][dev->devnum]){
-				  // Then it's new, open it if we have a spot available
-				  for(find_spot=0; find_spot < MAX_DEVICES; find_spot++)
-				  {
-					if(open_commandir_devices[find_spot].cmdir_udev == NULL)
-					{
-					  // Try to open here
-					  open_commandir_devices[find_spot].cmdir_udev = usb_open(dev);
-					  if(open_commandir_devices[find_spot].cmdir_udev == NULL)
-					  {
-						logprintf(LOG_ERR, 
-						  "Error opening commandir - bus %d, device %d.",
-						  bus, dev);
-						  break;
-						}
-						else 
-						{
-						  
-						// Try to set configuration; not needed on Linux
-// 						int usb_set_configuration(usb_dev_handle *dev, int configuration);
- 							int r = 0;
-// 							r = usb_set_configuration(open_commandir_devices[find_spot].cmdir_udev, 1);
-// 						printf("Set_configuration returned %d.\n", r);
-						  
-						  r = usb_claim_interface(
-						  	open_commandir_devices[find_spot].cmdir_udev,0);
-						  if(r < 0)
-						  {
-						  	cleanup_commandir_dev(find_spot);
-								logprintf(LOG_ERR, 
-								"Unable to claim CommandIR - Is it already busy?"
-								);
-								logprintf(LOG_ERR, 
-								"Try 'rmmod commandir' or check for other lircds"
-								);
-								break;
-						  }
-						  else 
-						  {
-							// great, it's ours
-							open_commandir_devices[find_spot].location = bus->location;
-							open_commandir_devices[find_spot].devnum = dev->devnum;
-							open_bus_hash[bus->location][dev->devnum] = 1;
-							open_commandir_devices[find_spot].bus = bus->location;
-							open_commandir_devices[find_spot].busdev = dev->devnum;
-							scan_find[++found][0] = bus->location;
-							scan_find[found][1] = dev->devnum;
-							device_count++;
-							changed++;
-							still_found[bus->location][dev->devnum] = 1;	
-							 
-							struct usb_config_descriptor *config = &dev->config[0];
-							struct usb_interface *interface = &config->interface[0];
-							struct usb_interface_descriptor *ainterface = &interface->altsetting[0];
-/*						struct usb_endpoint_descriptor *endpoint = &ainterface->endpoint[2];*/
-							
-							int i;// Load wMaxPacketSize for each endpoint; subtract 0x80 
-										// for double-buffer bit
-							for (i = 0; i < ainterface->bNumEndpoints; i++)
-							{
-								open_commandir_devices[find_spot].endpoint_max[ 
-									(ainterface->endpoint[i].bEndpointAddress >= 0x80) 
-									? (ainterface->endpoint[i].bEndpointAddress-0x80) 
-									: (ainterface->endpoint[i].bEndpointAddress)] 
-									= ainterface->endpoint[i].wMaxPacketSize;
-							}
-							
-							// compensate for double buffer:
-							open_commandir_devices[find_spot].endpoint_max[1] *= 2;
-							
-							// Always use the latest to RX:
-							commandir_rx_num = find_spot;	
-							
-							switch(dev->descriptor.iProduct)
-							{
-							 case 2:
-							 	logprintf(LOG_ERR, "Product identified as CommandIR II");
-							 	open_commandir_devices[find_spot].hw_type = HW_COMMANDIR_2;
-							  open_commandir_devices[find_spot].hw_revision = 0;
-							  open_commandir_devices[find_spot].hw_subversion = 0;
-							  
-							  int send_status = 0, tries=20;
-							  static char get_version[] = {2, GET_VERSION};
-
-								send_status = 4;	// just to start the while()
-								
-								while(tries--){
-									usleep(USB_TIMEOUT_US);	// wait a moment
-										
-									// try moving this below:
-									send_status = usb_bulk_write(
-									open_commandir_devices[find_spot].cmdir_udev, 
-										2, // endpoint2
-										get_version,
-										2, 
-										1500);
-									if(send_status < 0)
-									{
-										logprintf(LOG_ERR, 
-											"Unable to write version request - Is CommandIR busy? Error %d", send_status);
-										break;
-									}
-									
-									send_status = usb_bulk_read(
-										open_commandir_devices[find_spot].cmdir_udev,
-										1,
-										(char *)commandir_data_buffer,
-										open_commandir_devices[ find_spot ].endpoint_max[1],
-										1500);
-										
-									if(send_status < 0)
-									{
-										logprintf(LOG_ERR, 
-											"Unable to read version request - Is CommandIR busy? Error %d", send_status);
-										cleanup_commandir_dev(find_spot);
-										break;
-									}
-									if(send_status==3)
-									{
-										if(commandir_data_buffer[0]==GET_VERSION)
-										{
-											// Sending back version information.
-											open_commandir_devices[find_spot].hw_revision = 
-												commandir_data_buffer[1];
-											open_commandir_devices[find_spot].hw_subversion = 
-												commandir_data_buffer[2];
-											logprintf(LOG_ERR, "Hardware revision is %d.%d.", 
-												commandir_data_buffer[1], commandir_data_buffer[2]);
-											break;
-										}
-										else
-										{
-											continue;
-										}
-									}
-									
-							}
-							break;
-							default:
-								logprintf(LOG_ERR, "Product identified as CommandIR Mini");
-   							open_commandir_devices[find_spot].hw_type = 
-								HW_COMMANDIR_MINI;
-							}
-							
-							if(open_commandir_devices[find_spot].hw_type == 
-								HW_COMMANDIR_UNKNOWN)
-							{
-								logprintf(LOG_ERR, "Product UNKNOWN - cleanup");
-								cleanup_commandir_dev(find_spot);
-							}
-							else
-							{
-								lastSendSignalID[find_spot] = 0;
-								commandir_last_signal_id[find_spot] = 0;
-							}
-							break; // don't keep looping through find_spot
-							} // claim?
-						}// open?
-					}// spot available?
-				 }// for(spots)
-				} // if we haven't seen it before
-				else
-				{
-					still_found[bus->location][dev->devnum] = 1;
-				}
-			}// if it's a CommandIR
-		}// for bus dev's
-	}// for bus's
-	
-	if(!located)
-	{
-		logprintf(LOG_ERR, "No CommandIRs found");
-	}
-	
-	/* Check if any we currently know about have been removed
-	 * (Usually, we get a read/write error first)
-	 */
-	for(find_spot = 0; find_spot < MAX_DEVICES; find_spot++)
-	{
-		if(open_commandir_devices[find_spot].cmdir_udev != NULL)
-		{
-			if(still_found[open_commandir_devices[find_spot].location]
-				[open_commandir_devices[find_spot].devnum] != 1)
-			{
-				logprintf(LOG_ERR, "Commandir %d removed from [%d][%d].", find_spot,open_commandir_devices[find_spot].location, open_commandir_devices[find_spot].devnum);
-				raise_event(COMMANDIR_UNPLUG_1 + find_spot);
-				hardware_disconnect(find_spot);
-				commandir_rx_num = -1;
-				changed++;
-			}
-		}
-	}
-	
-	if(changed)
-	{
-		hardware_setorder();
-		raise_event(COMMANDIR_REORDERED);
-	}
-	
-}
-
-
-// Shutdown everything and terminate 
-static void shutdown_usb()
-{
-	int x;
-	
-	// Wait for any TX to complete before shutting down
-	if(top_signalq >= 0)
-	{
-		shutdown_pending++;
-		logprintf(LOG_ERR, "Waiting for signals to finish transmitting before shutdown");
-		return;
-	}
-	
-	for(x=0; x<MAX_DEVICES; x++)
-	{
-		if(open_commandir_devices[x].cmdir_udev )
-		{
-			usb_release_interface(open_commandir_devices[x].cmdir_udev, 
-				open_commandir_devices[x].interface);
-			usb_close(open_commandir_devices[x].cmdir_udev);
-		}
-	}
-	logprintf(LOG_ERR, "CommandIR driver child cleaned up and exiting");
-	raise_event(COMMANDIR_STOPPED);
-
-	_exit(EXIT_SUCCESS);
-}
-
-static void commandir_read_loop()
-{
-	// Read from CommandIR, Write to pipe
-	
-	unsigned char commands[MAX_COMMAND];
-	int curCommandStart = 0;
-	int curCommandLength = 0;
-	int bytes_read;
-	unsigned char periodic_checks = 0;
-	static unsigned char rx_decode_led[7] = {7, PROC_SET, 0x40, 0, 0,4, 2}; 
-	static unsigned char init_led[7] = {7, PROC_SET, 0x00, 0x01, 3, 55, 2}; 
-	static unsigned char deinit_led[7] = {7, PROC_SET, 0x0, 0x02, 3, 45, 2}; 
-	static unsigned int LIRC_frequency = 38000; 
-
-	int send_status = 0; 
-	int i = 0;
-	int tmp = 0;
-	int tmp2 = 0;
-
-	raise_event(COMMANDIR_READY);
-	
-	for(;;){
-		/*** This is the main loop the monitors control and TX events from 
-		  * the parent, and monitors the CommandIR RX buffer
-		  */
-		
-		curCommandStart = 0;
-		curCommandLength = 0;
-		bytes_read = read(tochild_read, commands, MAX_COMMAND); 
-		
-		if(shutdown_pending > 0 && (top_signalq==-1))
-			shutdown_usb();
-		
-		if(bytes_read > 0){
-		
-			while(curCommandStart < bytes_read){
-				curCommandLength = commands[curCommandStart] + 
-					commands[curCommandStart + 1] * 256;
-				
-				switch(commands[curCommandStart + 2]){	// the control value
-					case DEINIT_HEADER_LIRC:
-						for(i=0; i<device_count; i++)
-						{
-						 if(open_commandir_devices[tx_order[i]].hw_type ==
-						  HW_COMMANDIR_2)
-						 {
-						  if(open_commandir_devices[tx_order[i]].cmdir_udev > 0)
-						  {
-							send_status=usb_bulk_write(
-								open_commandir_devices[tx_order[i]].cmdir_udev, 
-								2, // endpoint2
-								(char*)deinit_led,
-								7, // bytes
-								USB_TIMEOUT_MS);
-						  }
-						  rx_hold = 1;	// Put a hold on RX, but queue events
-						 }
-						}
-						
-						break;
-					case INIT_HEADER_LIRC:
-						for(i=0; i<device_count; i++)
-						{
-						 if(open_commandir_devices[tx_order[i]].hw_type == 
-							HW_COMMANDIR_2)
-						 {
-						 if(open_commandir_devices[tx_order[i] ].cmdir_udev > 0)
-						  {
-							send_status=usb_bulk_write(
-								open_commandir_devices[tx_order[i] ].cmdir_udev,
-								2, // endpoint2
-								(char*)init_led,
-								7, // bytes
-								USB_TIMEOUT_MS);
-						  }
-						  rx_hold = 0;	// Resume RX after queue events
-						 }
-						}
-						break;
-					case RXDECODE_HEADER_LIRC:
-					  //	Successful RX decode: show it on the light.
-					  if(open_commandir_devices[commandir_rx_num].cmdir_udev > 0)
-					  {
-						send_status=usb_bulk_write(
-							open_commandir_devices[commandir_rx_num].cmdir_udev,
-							2, // endpoint2
-							(char*)rx_decode_led,
-							7, // bytes
-							USB_TIMEOUT_MS);
-
-					  }
-					  break;
-
-					case FREQ_HEADER_LIRC:
-						LIRC_frequency = (commands[curCommandStart + 6] & 0x000000ff) | 
-							((commands[curCommandStart + 5] << 8) & 0x0000ff00) | 
-							((commands[curCommandStart + 4] << 16) & 0x00ff0000) | 
-							((commands[curCommandStart + 3] << 24) & 0xff000000);
-						if(!LIRC_frequency)
-							LIRC_frequency = DEFAULT_FREQ;
-						break;
-					case TX_HEADER_NEW:
-					case TX_LIRC_T:
-						if(curCommandLength==64)
-						{
-							if(check_irsend_commandir(&commands[curCommandStart + 4]))
-							{
-								break; // it's a command for us
-							}
-						}
-						add_to_tx_pipeline(&commands[curCommandStart + 4], 
-							curCommandLength - 4, pre_pipeline_emitter_mask, LIRC_frequency);
-						break;
-						
-					case CHANNEL_EN_MASK:
-						pre_pipeline_emitter_mask = (commands[curCommandStart+4] << 8) |
-							 commands[curCommandStart+3];
-						break;
-				}
-				curCommandStart += curCommandLength;
-			
-			}
-		}
-		// If we're receiving, make sure the commandir buffer doesn't overrun
-		if(commandir_read() < 20 )
-			tmp = 2;
-		while(tmp-- > 0)
-		{
-			tmp2 = commandir_read();
-// 		printf("commandir_read() (%d) returning %d.\n", tmp,tmp2);
-		}
-		if(tmp2 < 20 ){
-			// once in a while, but never while we're retreaving a signal
-			if(++periodic_checks>100)
-			{
-				hardware_scan();
-				periodic_checks = 0;
-			}
-			else
-			{
- 				usleep(read_delay);
- 			}
-		}
-	}
-
-}
-
-static int check_irsend_commandir(unsigned char *command)
-{
-	// decode the code like LIRC would do, and take an action
-	int commandir_code = 0;
-	
-	commandir_code = commandir_decode((char*)command);
-	
-	if(commandir_code > 0xef)
-	{
-		// It's a settransmitters command
-		int channel = commandir_code & 0x0f;
-		
-		// can only set 1 bit from here so far..,
-		pre_pipeline_emitter_mask = 0x0001 << channel;	
-		
-		return commandir_code;
-	}
-	
-	switch(commandir_code)
-	{
-		case 0x53:
-			read_delay /= 2;	// "faster" means less time
-			if(read_delay < MIN_WAIT_BETWEEN_READS_US)
-				read_delay = MIN_WAIT_BETWEEN_READS_US;
-			break;
-		case 0x54:
-			read_delay *= 2;	// "slower" means more time
-			if(read_delay > MAX_WAIT_BETWEEN_READS_US)
-				read_delay = MAX_WAIT_BETWEEN_READS_US;
-			break;
-	
-		case 0x09: 
-		case 0x0A:
-			logprintf(LOG_ERR, "Re-selecting RX not implemented yet");
-			break;
-			
-		case 0xe6:	//	disable-fast-decode
-			logprintf(LOG_ERR, "Fast decoding disabled");
-			insert_fast_zeros = 0;
-			break;
-			
-		case 0xe7:	//	enable-fast-decode
-		case 0xe9:	//	force-fast-decode-2
-			logprintf(LOG_ERR, "Fast decoding enabled");
-			insert_fast_zeros = 2;
-			break;
-		
-		case 0xe8:	//	force-fast-decode-1
-			logprintf(LOG_ERR, "Fast decoding enabled (1)");
-			insert_fast_zeros = 1;
-			break;
-			
-		default:
-			if(commandir_code > 0x60 && commandir_code < 0xf0)
-			{
-				int ledhigh = 0, ledlow = 0, ledprog = -1;
-				// LED Command
-				switch(commandir_code >> 4)
-				{
-					case 0x6: ledlow = 0x80; break;
-					case 0x7: ledlow = 0x40; break;
-					case 0x8: ledlow = 0x20; break;
-					case 0x9: ledlow = 0x10; break;
-					case 0xa: ledlow = 0x04; break;
-					case 0xb: ledhigh = 0x80; break;
-					case 0xc: ledlow = 0x01; break;
-					case 0xd: ledlow = 0x02; break;
-					case 0xe: ledlow = 0x08; break;
-				}
-				ledprog = (commandir_code & 0x0f) - 1;
-				
-				if( ((ledhigh + ledlow) > 0) && ledprog > -1)
-				{
-					//	Set light:
-					static unsigned char lightchange[7] = {7, 
-					PROC_SET, 0, 0, 0, 0, 3}; 
-					lightchange[2] = ledhigh;
-					lightchange[3] = ledlow;
-					lightchange[4] = ledprog;
-					int send_status = 0; 
-					
-					send_status=usb_bulk_write(
-						open_commandir_devices[tx_order[0]].cmdir_udev, 
-						2, // endpoint2
-						(char *)lightchange,
-						7, // bytes
-						USB_TIMEOUT_MS);
-				}
-				
-				return commandir_code; // done
-			}
-		
-	}
-
-	return commandir_code;
-}
-
-
-// return how many RX's were in the last receive; so we know whether to poll more frequently or not
-static int commandir_read() 
-{
-	
-	/***  Which CommandIRs do we have to read from?  Poll RX CommandIRs 
-		* regularly, but non-receiving CommandIRs should be more periodically
-		*/
-	
-	int i,j;
-	int read_received = 0;
-	int read_retval = 0;
-	int conv_retval = 0;
-	int max_read = 5;
-	static int zeroterminated = 0;
-
-	for(i=0; i<device_count; i++)
-	{
-	
-		switch(open_commandir_devices[tx_order[i]].hw_type)
-		{
-			case HW_COMMANDIR_2:
-		
-				read_retval = usb_bulk_read(
-					open_commandir_devices[ tx_order[i] ].cmdir_udev,
-					1,
-					(char *)commandir_data_buffer,
-					open_commandir_devices[ tx_order[i] ].endpoint_max[1],
-					5000);	
-					
-				if(read_retval==0)
-					break;
-				
-				if(read_retval < 1)
-				{
-					if(read_retval < 0)
-					{
-						if(read_retval == -19){
-							logprintf(LOG_ERR, "Read Error - CommandIR probably unplugged");
-						}
-						else
-						{
-							logprintf(LOG_ERR, 
-								"Didn't receive a full packet from a CommandIR II! - err %d ."
-								, read_retval);
-						}
-						hardware_disconnect(tx_order[i]);
-						hardware_scan();
-					}
-					// 0 bytes is the most frequency case; nothing to report
-
-					break;
-				} 
-				
-				if(commandir_data_buffer[0]==RX_HEADER_TXAVAIL)
-				{
-					// sending us the current tx_start, tx_end arrays, and where it's at
-					commandir_tx_start[tx_order[i]*4] = commandir_data_buffer[4];
-					commandir_tx_start[tx_order[i]*4+1] = commandir_data_buffer[3];
-					commandir_tx_start[tx_order[i]*4+2] = commandir_data_buffer[2];
-					commandir_tx_start[tx_order[i]*4+3] = commandir_data_buffer[1];
-					
-					commandir_tx_end[tx_order[i]*4] = commandir_data_buffer[8];
-					commandir_tx_end[tx_order[i]*4+1] = commandir_data_buffer[7];
-					commandir_tx_end[tx_order[i]*4+2] = commandir_data_buffer[6];
-					commandir_tx_end[tx_order[i]*4+3] = commandir_data_buffer[5];
-					
-					commandir_last_signal_id[ tx_order[i] ] = commandir_data_buffer[9];
-					
-					recalc_tx_available(tx_order[i]); 
-					pipeline_check();
-					if(top_signalq > 0)
-					{
-						read_received++;	
-					}
-					
-					// This ALSO implies there's NO MORE RX DATA.
-					lirc_t lirc_zero_buffer[2] = {0, 0};
-					
-					int tmp4 = 0;
-					if(zeroterminated>1001)
-					{
-						// Send LIRC a 0,0 packet to allow IMMEDIATE decoding
-						if(insert_fast_zeros > 0)
-						{
-							tmp4 = write(child_pipe_write, lirc_zero_buffer, sizeof(lirc_t)*insert_fast_zeros);
-						}
-						zeroterminated = 0;
-					}
-					else
-					{
-						if((zeroterminated < 1000) && (zeroterminated > 0))
-							zeroterminated += 1000;
-						if(zeroterminated > 1000)
-							zeroterminated++;
-					}
-					
-					break;
-				}
-						
-						
-				if(commandir_data_buffer[0]==RX_HEADER_EVENTS)
-				{
-					for(j=1; j<(read_retval); j++)
-					{
-						raise_event(commandir_data_buffer[j]+tx_order[i]*0x10);
-					}
-				}
-				else
-				{
-					if( (commandir_data_buffer[0]==RX_HEADER_DATA) && 
-						(commandir_rx_num==tx_order[i]) )
-					{
-						if(rx_hold==0)	// Only if we should be listening for remote cmds
-						{
-							zeroterminated = 1;
-							conv_retval = commandir2_convert_RX(
-								(unsigned short *)&commandir_data_buffer[2], 
-								commandir_data_buffer[1]);
-							read_received = conv_retval; // header
-						}
-					}
-				}
-				break;
-			
-			case HW_COMMANDIR_MINI:
-			
-				max_read = 5;
-				while(max_read--){
-					
-					read_retval = usb_bulk_read(
-						open_commandir_devices[ tx_order[i] ].cmdir_udev,
-						1,
-						(char *)commandir_data_buffer,
-						64,
-						USB_TIMEOUT_MS);
-							
-					if (!(read_retval == MAX_HW_MINI_PACKET)) 
-					{
-						if(read_retval == -19){
-							logprintf(LOG_ERR, "Read Error - CommandIR probably unplugged");
-						}
-						else
-						{
-							logprintf(LOG_ERR, 
-								"Didn't receive a full packet from a Mini! - err %d ."
-								, read_retval);
-						}
-						
-						hardware_disconnect(tx_order[i]);
-						hardware_scan();
-						break; 
-					}
-
-					
-					if ( (commandir_data_buffer[1] > 0)  && 
-						(commandir_rx_num==tx_order[i]) ) 
-					{
-						conv_retval = cmdir_convert_RX(commandir_data_buffer);
-						
-						read_received += commandir_data_buffer[1];					
-						
-						if(commandir_data_buffer[1] < 20)
-						{
-							// Lots of hardware buffer room left; don't tie up CPU
-							break;
-						}
-					}
-					else
-					{
-						break;
-					}
-				} // while; should only repeat if there's more RX data
-				
-				/* CommandIR Mini only has 1 buffer  */
-				commandir_tx_start[tx_order[i]*4] = 0;
-				commandir_tx_start[tx_order[i]*4+1] = 0;
-				commandir_tx_start[tx_order[i]*4+2] = 0;
-				commandir_tx_start[tx_order[i]*4+3] = 0;
-				
-				commandir_tx_end[tx_order[i]*4] = commandir_data_buffer[2];
-				commandir_tx_end[tx_order[i]*4+1] = commandir_data_buffer[2];
-				commandir_tx_end[tx_order[i]*4+2] = commandir_data_buffer[2];
-				commandir_tx_end[tx_order[i]*4+3] = commandir_data_buffer[2];
-				
-				/* .. and it can't pipeline... */
-				commandir_last_signal_id[i] = lastSendSignalID[i];
-				recalc_tx_available(tx_order[i]); 
-				pipeline_check();
-				break;
-			case HW_COMMANDIR_UNKNOWN:
-					break;
-		} // end switch
-	} // for each attached hardware device
-	return read_received;
-}
-
-static void setEmitterMask(int bitmask)
-{
-	channels_en[0] = bitmask & 0x0F;
-	channels_en[1] = (bitmask >> 4) & 0xfF;
-	channels_en[2] = (bitmask >> 8) & 0xfF;
-	channels_en[3] = (bitmask >> 12) & 0xfF;
-}
-
-
-static int commandir2_convert_RX(unsigned short *bufferrx, 
-	unsigned char numvalues)
-{
-	// convert hardware timestamp values to elapsed time values
-	
-	int i;
-	int curpos = 0;
-	int bytes_w = 0;
-	lirc_t lirc_data_buffer[256];	
-	
-	i=0;
-	int pca_count = 0;
-	int overflows = 0;
-	
-	while(curpos < numvalues )
-	{
-		pca_count = (bufferrx[curpos] & 0x3fff) << 2; 
-		pca_count = pca_count / 12;
-		
-		if(bufferrx[curpos] & COMMANDIR_2_OVERFLOW_MASK)
-		{
-			overflows = bufferrx[curpos+1];
-			lirc_data_buffer[i] =  pca_count + (overflows * 0xffff / 12);
-			
-			if(bufferrx[curpos] & COMMANDIR_2_PULSE_MASK)
-			{
-				lirc_data_buffer[i] |= PULSE_BIT;
-			}
-			curpos++;
-		
-		}
-		else
-		{
-			lirc_data_buffer[i] = pca_count;
-			if(bufferrx[curpos] & COMMANDIR_2_PULSE_MASK)
-			{
-				lirc_data_buffer[i] |= PULSE_BIT;
-			}
-		}
-		
-		curpos++;
-		i++;
-		if(i> 255)
-		{
-			break;
-		}
-	}
-		
- 	bytes_w = write(child_pipe_write, lirc_data_buffer, sizeof(lirc_t)*i);
-	
-	if (bytes_w < 0)
-	{
-		logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
-		return 0;
-	}	
-	
-	return bytes_w;
-}
-
-
-
-
-// Originally from lirc_cmdir.c
-static int cmdir_convert_RX(unsigned char *orig_rxbuffer)
-{
-	unsigned int num_data_values = 0;
-	unsigned int num_data_bytes = 0;
-	unsigned int asint1 = 0, asint2 = 0, overflows = 0;
-	int i;
-	int bytes_w;	// Pipe write
-	lirc_t lirc_data_buffer[256];	
-	
-
-	num_data_bytes = orig_rxbuffer[1];
-	
-	/* check if num_bytes is multiple of 3; if not, error  */
-	if (num_data_bytes%3 > 0) return -1;
-	if (num_data_bytes > 60) return -3; 
-	if (num_data_bytes < 3) return -2;
-	
-	num_data_values = num_data_bytes/3;
-	
-	asint2 = orig_rxbuffer[3] + orig_rxbuffer[4] * 0xff;
-	if(last_mc_time==-1)
-	{
-		// The first time we run there's no previous time value
-		last_mc_time = asint2 - 110000;	
-		if(last_mc_time < 0) last_mc_time+=0xffff;
-	}
-	
-	asint1 = last_mc_time;
-	overflows = orig_rxbuffer[5];
-	
-	for(i=2; i<num_data_values+2; i++)
-	{
-		if(overflows < 0xff)
-		{
-			// space
-			lirc_data_buffer[i-2] = get_time_value(asint1,
-				 asint2, overflows) - 26;
-		} 
-		else 
-		{	// pulse
-			lirc_data_buffer[i-2] = get_time_value(asint1,
-				 asint2, 0) + 26;
-			lirc_data_buffer[i-2] |= PULSE_BIT;
-		}	
-		asint1 = asint2; 
-		asint2 = orig_rxbuffer[i*3] + orig_rxbuffer[i*3+1] * 0xff;
-		overflows = orig_rxbuffer[i*3+2];	
-	}
-	last_mc_time = asint1;
-	
-	
- 	bytes_w = write(child_pipe_write, lirc_data_buffer, sizeof(lirc_t)*num_data_values);
-	
-	if (bytes_w < 0)
-	{
-		logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
-		goto done;
-	}	
-	
-done:
-	return bytes_w;
-
-}
-
-
-
-
-static unsigned int get_time_value(unsigned int firstint, 
-	unsigned int secondint, unsigned char overflow) 
-{	
-	/* get difference between two MCU timestamps, CommandIR Mini version  */
-	unsigned int t_answer = 0;
-	
-	if (secondint > firstint) 
-	{
-		t_answer = secondint - firstint + overflow*0xffff;
-	} 
-	else 
-	{
-		if (overflow > 0) 
-		{
-			t_answer = (65536 - firstint) + secondint + (overflow - 1)*0xffff - 250;
-		} 
-		else 
-		{
-			t_answer = (65536 - firstint) + secondint;
-		}
-	}
-
-	/* clamp to long signal  */
-	if (t_answer > 16000000) t_answer = PULSE_MASK;
-	return t_answer;
-}
-
-
-static void raise_event(unsigned int eventid)
-{
-	/* Raise an LIRC Event by
-	 * Generating lirc_t Pattern
-	 */
-	static lirc_t event_data[18] = {LIRCCODE_GAP, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-	int i, bytes_w;
-
-	// 	logprintf(LOG_ERR, "Raising event %d", eventid);
-	for(i=0; i<8; i++)
-	{
-		if( (eventid & 0x80) )
-		{
-			event_data[i*2+1] = signal_base[0][0];
-			event_data[i*2+2] = signal_base[0][1];
-		}
-		else
-		{
-			event_data[i*2+1] = signal_base[1][0];
-			event_data[i*2+2] = signal_base[1][1];
-		}
-		eventid = eventid << 1;
-	}
-	
- 	event_data[16] = LIRCCODE_GAP*4;
- 	
- 	bytes_w = write(child_pipe_write, event_data, sizeof(lirc_t) * 17);
-	
-	if (bytes_w < 0)
-	{
-		logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
-	}	
-	
-}
-
-static int commandir_decode(char *command)
-{
-	// Decode the signal to a number, just like LIRC; 
-	// there's probably a built-in way to do this.
-	int i;
-	int code = 0;
-	
-	lirc_t *codes;	
-	codes = (lirc_t *)command;
-	
-	for(i=0; i<15; i+=2)
-	{
-		code = code << 1;
-		if(codes[i]==100)
-			code |= 1;
-	}
-	return code;
-}
-
diff --git a/abs/core/lirc_085/hw_commandir.h b/abs/core/lirc_085/hw_commandir.h
deleted file mode 100755
index 2280f6c..0000000
--- a/abs/core/lirc_085/hw_commandir.h
+++ /dev/null
@@ -1,175 +0,0 @@
- 
-/****************************************************************************
- ** hw_commandir.h **********************************************************
- ****************************************************************************
- * 
- * Copyright (C) 1999 Christoph Bartelmus <lirc@bartelmus.de>
- * -- Original hw_default.h
- * Modified for CommandIR Transceivers, April-June 2008, Matthew Bodkin 
- *
- */
-
-#ifndef HW_COMMANDIR_H
-#define HW_COMMANDIR_H
-
-#define RX_BUFFER_SIZE 1024
-#define TX_BUFFER_SIZE 1024
-#define TX_QUEUE 1
-#define RX_QUEUE 0
-#define MAX_COMMANDIRS 4
-#define MAX_COMMAND 8192
-
-/* transmitter channel control */
-#define MAX_DEVICES		4
-#define MAX_CHANNELS    16
-#define DEVICE_CHANNELS	4
-#define MAX_MASK 		0xffff
-#define MAX_SIGNALQ		100
-
-/* CommandIR control codes */
-#define CHANNEL_EN_MASK	1
-#define FREQ_HEADER     2
-#define MCU_CTRL_SIZE   3
-#define TX_HEADER       7
-#define TX_HEADER_NEW	8
-/* New for CommandIR II  */
-
-#define READ_INPUTS		10
-#define PROC_SET		11
-#define INIT_FUNCTION	12
-#define RX_SELECT		13
-#define TX_COMMANDIR_II 14
-/* Internal to driver */
-#define TX_LIRC_T	    15
-#define FREQ_HEADER_LIRC 16
-#define RXDECODE_HEADER_LIRC 17
-#define INIT_HEADER_LIRC 18
-#define DEINIT_HEADER_LIRC 19
-#define GET_VERSION 	20
-
-#define COMMANDIR_2_PULSE_MASK 0x8000
-#define COMMANDIR_2_OVERFLOW_MASK 0x4000
-
-#define DEFAULT_PULSE_WIDTH 13
-
-#define USB_CMDIR_VENDOR_ID		0x10c4
-#define USB_CMDIR_PRODUCT_ID	0x0003
-#define USB_CMDIR_MINOR_BASE	192
-
-#define HW_COMMANDIR_MINI 	1
-#define HW_COMMANDIR_2		2
-#define HW_COMMANDIR_UNKNOWN 127
-
-#define MAX_HW_MINI_PACKET 64
-
-// CommandIR has lots of buffer room, we don't need to poll constantly
-#define USB_TIMEOUT_MS 5000
-#define USB_TIMEOUT_US 1000
-#define WAIT_BETWEEN_READS_US 10000
-#define MAX_WAIT_BETWEEN_READS_US 5000000
-#define MIN_WAIT_BETWEEN_READS_US 5000
-
-#define USB_MAX_BUSES	8
-#define USB_MAX_BUSDEV	127
-
-#define RX_HEADER_DATA 		0x01
-#define RX_HEADER_EVENTS 	0x02
-#define RX_HEADER_TXAVAIL 	0x03
-
-
-// We keep CommandIR's OPEN even on -deinit for speed and to monitor 
-// Other non-LIRC events (plugin, suspend, etc)
-#define USB_KEEP_WARM 1
-
-// CommandIR lircd.conf event driven code definitions
-#define LIRCCODE_GAP  125000
-#define JACK_PLUG_1		0x01
-#define JACK_PLUG_2		0x02
-#define JACK_PLUG_3		0x03
-#define JACK_PLUG_4		0x04
-#define JACK_PLUG_5		0x11
-#define JACK_PLUG_6		0x12
-#define JACK_PLUG_7		0x13
-#define JACK_PLUG_8		0x14
-#define JACK_PLUG_9		0x21
-#define JACK_PLUG_10	0x22
-#define JACK_PLUG_11	0x23
-#define JACK_PLUG_12	0x24
-#define JACK_PLUG_13	0x31
-#define JACK_PLUG_14	0x32
-#define JACK_PLUG_15	0x33
-#define JACK_PLUG_16	0x34
-
-#define JACK_UNPLUG_1	0x05
-#define JACK_UNPLUG_2	0x06
-#define JACK_UNPLUG_3	0x07
-#define JACK_UNPLUG_4	0x08
-#define JACK_UNPLUG_5	0x15
-#define JACK_UNPLUG_6	0x16
-#define JACK_UNPLUG_7	0x17
-#define JACK_UNPLUG_8	0x18
-#define JACK_UNPLUG_9	0x25
-#define JACK_UNPLUG_10	0x26
-#define JACK_UNPLUG_11	0x27
-#define JACK_UNPLUG_12	0x28
-#define JACK_UNPLUG_13	0x35
-#define JACK_UNPLUG_14	0x36
-#define JACK_UNPLUG_15	0x37
-#define JACK_UNPLUG_16	0x38
-
-#define SELECT_TX_INTERNAL	0x09
-#define SELECT_TX_ExTERNAL	0x0A
-
-#define SELECT_TX_ON_1		0x0D
-#define SELECT_TX_ON_2		0x1D
-#define SELECT_TX_ON_3		0x2D
-#define SELECT_TX_ON_4		0x3D
-
-#define JACK_PLUG_RX_1		0x0B
-#define JACK_UNPLUG_RX_1	0x0C
-#define JACK_PLUG_RX_2		0x1B
-#define JACK_UNPLUG_RX_2	0x1C
-#define JACK_PLUG_RX_3		0x2B
-#define JACK_UNPLUG_RX_3	0x2C
-#define JACK_PLUG_RX_4		0x3B
-#define JACK_UNPLUG_RX_4	0x3C
-
-#define COMMANDIR_PLUG_1	0x41
-#define COMMANDIR_PLUG_2	0x42
-#define COMMANDIR_PLUG_3	0x43
-#define COMMANDIR_PLUG_4	0x44
-
-#define COMMANDIR_UNPLUG_1	0x45
-#define COMMANDIR_UNPLUG_2	0x46
-#define COMMANDIR_UNPLUG_3	0x47
-#define COMMANDIR_UNPLUG_4	0x48
-
-#define COMMANDIR_REORDERED	0x50
-#define COMMANDIR_READY		0x51
-#define COMMANDIR_STOPPED	0x52
-#define COMMANDIR_POLL_FASTER	0x53
-#define COMMANDIR_POLL_SLOWER	0x54
-
-#define SETTRANSMITTERS_1	0xf0
-#define SETTRANSMITTERS_2	0xf1
-#define SETTRANSMITTERS_3	0xf2
-#define SETTRANSMITTERS_4	0xf3
-#define SETTRANSMITTERS_5	0xf4
-#define SETTRANSMITTERS_6	0xf5
-#define SETTRANSMITTERS_7	0xf6
-#define SETTRANSMITTERS_8	0xf7
-#define SETTRANSMITTERS_9	0xf8
-#define SETTRANSMITTERS_10	0xf9
-#define SETTRANSMITTERS_11	0xfa
-#define SETTRANSMITTERS_12	0xfb
-#define SETTRANSMITTERS_13	0xfc
-#define SETTRANSMITTERS_14	0xfd
-#define SETTRANSMITTERS_15	0xfe
-#define SETTRANSMITTERS_16	0xff
-
-// What's in a returning data packet
-#define COMMANDIR_RX_EVENTS 		0x02
-#define COMMANDIR_RX_DATA			0x01
-
-
-#endif
diff --git a/abs/core/lirc_085/kernel-2.6.26.patch b/abs/core/lirc_085/kernel-2.6.26.patch
deleted file mode 100644
index 74bb986..0000000
--- a/abs/core/lirc_085/kernel-2.6.26.patch
+++ /dev/null
@@ -1,122 +0,0 @@
---- a/drivers/kcompat.h	2008-01-13 11:26:28.000000000 +0100
-+++ b/drivers/kcompat.h	2008-05-14 18:37:49.000000000 +0200
-@@ -1,4 +1,4 @@
--/*      $Id: kcompat.h,v 5.34 2008/01/13 10:26:28 lirc Exp $      */
-+/*      $Id: kcompat.h,v 5.36 2008/05/14 16:37:49 lirc Exp $      */
- 
- #ifndef _KCOMPAT_H
- #define _KCOMPAT_H
-@@ -36,10 +36,10 @@
- 	class_simple_destroy(cls);
- }
- 
--#define lirc_class_device_create(cs, parent, dev, device, fmt, args...) \
--	class_simple_device_add(cs, dev, device, fmt, ## args)
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+	class_simple_device_add(cs, dev, parent, fmt, ## args)
- 
--static inline void class_device_destroy(lirc_class_t *cls, dev_t devt)
-+static inline void lirc_device_destroy(lirc_class_t *cls, dev_t devt)
- {
- 	class_simple_device_remove(devt);
- }
-@@ -48,20 +48,40 @@
- 
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
- 
--#define lirc_class_device_create(cs, parent, dev, device, fmt, args...) \
--	class_device_create(cs, dev, device, fmt, ## args)
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+	class_device_create(cs, dev, parent, fmt, ## args)
- 
- #else /* >= 2.6.15 */
- 
--#define lirc_class_device_create class_device_create
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
-+
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+	class_device_create(cs, NULL, dev, parent, fmt, ## args)
-+
-+#else /* >= 2.6.26 */
-+
-+#define lirc_device_create device_create
-+
-+#endif /* >= 2.6.26 */
-+
- #define LIRC_DEVFS_PREFIX
- 
--#endif
-+#endif /* >= 2.6.15 */
- 
- typedef struct class lirc_class_t;
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
-+
-+#define lirc_device_destroy class_device_destroy
-+
-+#else
-+
-+#define lirc_device_destroy device_destroy
-+
- #endif
- 
-+#endif /* >= 2.6.13 */
-+
- #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 0)
- #define LIRC_HAVE_DEVFS
- #define LIRC_HAVE_DEVFS_24
-@@ -133,8 +153,8 @@
- #ifndef LIRC_HAVE_SYSFS
- #define class_destroy(x) do { } while (0)
- #define class_create(x, y) NULL
--#define class_device_destroy(x, y) do { } while (0)
--#define lirc_class_device_create(x, y, z, xx, yy, zz) 0
-+#define lirc_class_destroy(x, y) do { } while (0)
-+#define lirc_class_create(x, y, z, xx, yy, zz) 0
- #define IS_ERR(x) 0
- typedef struct class_simple
- {
---- a/drivers/lirc_dev/lirc_dev.c	2008-01-13 11:45:02.000000000 +0100
-+++ b/drivers/lirc_dev/lirc_dev.c	2008-05-14 18:37:49.000000000 +0200
-@@ -17,7 +17,7 @@
-  *  along with this program; if not, write to the Free Software
-  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-  *
-- * $Id: lirc_dev.c,v 1.56 2008/01/13 10:45:02 lirc Exp $
-+ * $Id: lirc_dev.c,v 1.58 2008/05/14 16:37:49 lirc Exp $
-  *
-  */
- 
-@@ -145,7 +145,8 @@
- #ifdef LIRC_HAVE_DEVFS_26
- 	devfs_remove(DEV_LIRC "/%u", ir->p.minor);
- #endif
--	class_device_destroy(lirc_class, MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
-+	lirc_device_destroy(lirc_class,
-+			    MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
- 
- 	if (ir->buf != ir->p.rbuf) {
- 		lirc_buffer_free(ir->buf);
-@@ -400,9 +401,9 @@
- 			S_IFCHR|S_IRUSR|S_IWUSR,
- 			DEV_LIRC "/%u", ir->p.minor);
- #endif
--	(void) lirc_class_device_create(lirc_class, NULL,
--					MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
--					ir->p.dev, "lirc%u", ir->p.minor);
-+	(void) lirc_device_create(lirc_class, ir->p.dev,
-+				  MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
-+				  "lirc%u", ir->p.minor);
- 
- 	if (p->sample_rate || p->get_queue) {
- 		/* try to fire up polling thread */
-@@ -441,7 +442,8 @@
- 	return minor;
- 
- out_sysfs:
--	class_device_destroy(lirc_class, MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
-+	lirc_device_destroy(lirc_class,
-+			    MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
- #ifdef LIRC_HAVE_DEVFS_24
- 	devfs_unregister(ir->devfs_handle);
- #endif
diff --git a/abs/core/lirc_085/kernel-2.6.27.patch b/abs/core/lirc_085/kernel-2.6.27.patch
deleted file mode 100644
index 05cf75b..0000000
--- a/abs/core/lirc_085/kernel-2.6.27.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-diff -Nur lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c lirc-0.8.3/drivers/lirc_dev/lirc_dev.c
---- lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c	2008-01-13 11:45:02.000000000 +0100
-+++ lirc-0.8.3/drivers/lirc_dev/lirc_dev.c	2008-10-10 16:29:15.000000000 +0200
-@@ -49,7 +49,7 @@
- #include <linux/uaccess.h>
- #include <linux/errno.h>
- #endif
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)
- #include <linux/wrapper.h>
- #endif
-diff -Nur lirc-0.8.3.orig/drivers/lirc_i2c/lirc_i2c.c lirc-0.8.3/drivers/lirc_i2c/lirc_i2c.c
---- lirc-0.8.3.orig/drivers/lirc_i2c/lirc_i2c.c	2008-05-04 15:49:53.000000000 +0200
-+++ lirc-0.8.3/drivers/lirc_i2c/lirc_i2c.c	2008-10-10 16:29:00.000000000 +0200
-@@ -54,7 +54,7 @@
- #include <linux/i2c.h>
- #include <linux/i2c-algo-bit.h>
- 
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- 
- #include "drivers/kcompat.h"
- #include "drivers/lirc_dev/lirc_dev.h"
---- lirc-0.8.3.orig/drivers/kcompat.h	2008/05/14 16:37:49	5.36
-+++ lirc-0.8.3.orig/drivers/kcompat.h	2008/09/27 08:16:15	5.37
-@@ -36,7 +36,7 @@
- 	class_simple_destroy(cls);
- }
- 
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- 	class_simple_device_add(cs, dev, parent, fmt, ## args)
- 
- static inline void lirc_device_destroy(lirc_class_t *cls, dev_t devt)
-@@ -48,20 +48,29 @@
- 
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
- 
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- 	class_device_create(cs, dev, parent, fmt, ## args)
- 
- #else /* >= 2.6.15 */
- 
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
- 
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- 	class_device_create(cs, NULL, dev, parent, fmt, ## args)
- 
- #else /* >= 2.6.26 */
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
-+
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
-+	class_device_create(cs, parent, dev, fmt, ## args)
-+
-+#else /* >= 2.6.27 */
-+
- #define lirc_device_create device_create
- 
-+#endif /* >= 2.6.27 */
-+
- #endif /* >= 2.6.26 */
- 
- #define LIRC_DEVFS_PREFIX
---- lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c	2008/09/06 07:30:16	1.60
-+++ lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c	2008/09/27 08:16:15	1.61
-@@ -397,7 +397,7 @@
- 			DEV_LIRC "/%u", ir->p.minor);
- #endif
- 	(void) lirc_device_create(lirc_class, ir->p.dev,
--				  MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
-+				  MKDEV(IRCTL_DEV_MAJOR, ir->p.minor), NULL,
- 				  "lirc%u", ir->p.minor);
- 
- 	if (p->sample_rate || p->get_queue) {
diff --git a/abs/core/lirc_085/lirc.fdi b/abs/core/lirc_085/lirc.fdi
deleted file mode 100644
index 6f2443a..0000000
--- a/abs/core/lirc_085/lirc.fdi
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<deviceinfo version="0.2">
-  <device>
-     <!-- This rule prevents the Dvico dual digital4 rev 2
-          remote input device from making your keyboard act wierd. -->
-     <match key="info.product" contains_ncase="IR-receiver inside an USB DVB receiver">
-        <merge key="info.ignore" type="bool">true</merge>
-     </match>
-  </device>
-</deviceinfo>
diff --git a/abs/core/lirc_085/lirc.install b/abs/core/lirc_085/lirc.install
deleted file mode 100644
index 53340e5..0000000
--- a/abs/core/lirc_085/lirc.install
+++ /dev/null
@@ -1,50 +0,0 @@
-# This is a default template for a post-install scriptlet.  You can
-# remove any functions you don't need (and this header).
-
-# arg 1:  the new package version
-pre_install() {
-  /bin/true
-}
-
-# arg 1:  the new package version
-post_install() {
-  # updating module dependencies
-  echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.28-LinHES
-  depmod -v $KERNEL_VERSION > /dev/null 2>&1
-  /bin/true
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-pre_upgrade() {
-  /bin/true
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-post_upgrade() {
-  # updating module dependencies
-  echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.28-LinHES
-  depmod -v $KERNEL_VERSION > /dev/null 2>&1
-  /bin/true
-}
-
-# arg 1:  the old package version
-pre_remove() {
-  /bin/true
-}
-
-# arg 1:  the old package version
-post_remove() {
-  # updating module dependencies
-  echo ">>> Updating module dependencies. Please wait ..."
-  KERNEL_VERSION=2.6.28-LinHES
-  depmod -v $KERNEL_VERSION > /dev/null 2>&1
-  /bin/true
-}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core/lirc_085/lirc_atiusb.patch b/abs/core/lirc_085/lirc_atiusb.patch
deleted file mode 100644
index 2f0c61e..0000000
--- a/abs/core/lirc_085/lirc_atiusb.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ruaN lirc-0.8.4.orig/drivers/lirc_atiusb/lirc_atiusb.c lirc-0.8.4/drivers/lirc_atiusb/lirc_atiusb.c
---- lirc-0.8.4.orig/drivers/lirc_atiusb/lirc_atiusb.c	2008-05-19 08:10:35.000000000 +0000
-+++ lirc-0.8.4/drivers/lirc_atiusb/lirc_atiusb.c	2009-02-14 22:35:44.000000000 +0000
-@@ -192,8 +192,9 @@
- /* init strings */
- #define USB_OUTLEN		7
- 
--static char init1[] = {0x01, 0x00, 0x20, 0x14};
--static char init2[] = {0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20};
-+static char init1[] = {0x80, 0x05, 0x1b, 0x15, 0x14, 0x20, 0x24, 0x15};
-+static char init2[] = {0x83, 0x03};
-+static char init3[] = {0x84, 0xd7, 0x020};
- 
- struct in_endpt {
- 	/* inner link in list of endpoints for the remote specified by ir */
-@@ -1183,8 +1184,9 @@
- 			oep->buf, USB_OUTLEN, usb_remote_send,
- 			oep, oep->ep->bInterval);
- 
--		send_packet(oep, 0x8004, init1);
--		send_packet(oep, 0x8007, init2);
-+               send_packet(oep, 0x8007, init1);
-+               send_packet(oep, 0x8002, init2);
-+               send_packet(oep, 0x8003, init3);
- 	}
- }
- 
diff --git a/abs/core/lirc_085/lirc_mod_mce.patch b/abs/core/lirc_085/lirc_mod_mce.patch
deleted file mode 100644
index 1dc6644..0000000
--- a/abs/core/lirc_085/lirc_mod_mce.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-diff -Naru lirc_mod_mce/lirc_mod_mce.c lirc_mod_mce_new/lirc_mod_mce.c
---- lirc_mod_mce/lirc_mod_mce.c	2008-04-18 02:12:28.000000000 +0930
-+++ lirc_mod_mce_new/lirc_mod_mce.c	2009-11-22 18:45:24.000000000 +1030
-@@ -171,17 +171,76 @@
- #define VENDOR_TATUNG           0x1460
- #define VENDOR_GATEWAY          0x107b
- #define VENDOR_SHUTTLE          0x1308
-+#define VENDOR_PHILIPS          0x0471
-+#define VENDOR_SMK              0x0609
-+#define VENDOR_TATUNG           0x1460
-+#define VENDOR_GATEWAY          0x107b
-+#define VENDOR_SHUTTLE          0x1308
-+#define VENDOR_SHUTTLE2         0x051c
-+#define VENDOR_MITSUMI          0x03ee
-+#define VENDOR_TOPSEED          0x1784
-+#define VENDOR_RICAVISION       0x179d
-+#define VENDOR_ITRON            0x195d
-+#define VENDOR_FIC              0x1509
-+#define VENDOR_LG               0x043e
-+#define VENDOR_MICROSOFT        0x045e
-+#define VENDOR_FORMOSA          0x147a
-+#define VENDOR_FINTEK           0x1934
- #define VENDOR_PINNACLE         0x2304
- 
--
- static struct usb_device_id usb_remote_table [] = {
--    { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },  /* Philips eHome Infrared Transciever */
--    { USB_DEVICE(VENDOR_SMK, 0x031d) },      /* SMK/Toshiba G83C0004D410 */
--    { USB_DEVICE(VENDOR_TATUNG, 0x9150) },   /* Tatung eHome Infrared Transceiver */
--    { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },  /* Shuttle eHome Infrared Transceiver */
--    { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },  /* Gateway eHome Infrared Transceiver */
--    { USB_DEVICE(VENDOR_PINNACLE, 0x0225) }, /* Pinnacle Remote USB RC6 */
--    { }                                      /* Terminating entry */
-+    /* Philips eHome Infrared Transciever */
-+    { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
-+    /* Philips Infrared Transciever - HP branded */
-+    { USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
-+    /* Philips SRM5100 */
-+    { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
-+    /* SMK/Toshiba G83C0004D410 */
-+    { USB_DEVICE(VENDOR_SMK, 0x031d) },
-+    /* SMK eHome Infrared Transceiver (Sony VAIO) */
-+    { USB_DEVICE(VENDOR_SMK, 0x0322) },
-+    /* bundled with Hauppauge PVR-150 */
-+    { USB_DEVICE(VENDOR_SMK, 0x0334) },
-+    /* Tatung eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
-+    /* Shuttle eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
-+    /* Shuttle eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
-+    /* Gateway eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
-+    /* Mitsumi */
-+    { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
-+    /* Topseed eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
-+    /* Topseed HP eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
-+    /* Topseed eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
-+    /* Topseed eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
-+    /* Ricavision internal Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
-+    /* Itron ione Libra Q-11 */
-+    { USB_DEVICE(VENDOR_ITRON, 0x7002) },
-+    /* FIC eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_FIC, 0x9242) },
-+    /* LG eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_LG, 0x9803) },
-+    /* Microsoft MCE Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
-+    /* Formosa eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
-+    /* Formosa aim / Trust MCE Infrared Receiver */
-+    { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
-+    /* Formosa Industrial Computing / Beanbag Emulation Device */
-+    { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
-+    /* Fintek eHome Infrared Transceiver */
-+    { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
-+    /* Pinnacle Remote USB RC6 */
-+    { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
-+    /* Terminating entry */
-+    { }
- };
- 
- static unsigned char usb_kbd_keycode[256] = {
-@@ -252,6 +311,8 @@
-     struct semaphore lock;
-     char name[NAME_BUFSIZE];
-     char phys[NAME_BUFSIZE];
-+
-+    unsigned int carrier_freq;
- };
- 
- /* init strings */
-@@ -889,6 +950,51 @@
-     }
- }
- 
-+/* Sets the send carrier frequency */
-+static int set_send_carrier(struct irctl *ir, int carrier)
-+{
-+    	int clk = 10000000;
-+	int prescaler = 0, divisor = 0;
-+	unsigned char cmdbuf[] = { 0x9F, 0x06, 0x01, 0x80 };
-+
-+	/* Carrier is changed */
-+	if (ir->carrier_freq != carrier) {
-+
-+		if (carrier <= 0) {
-+			ir->carrier_freq = carrier;
-+			dprintk(DRIVER_NAME "[%d]: SET_CARRIER disabling "
-+				"carrier modulation\n", ir->devnum);
-+			request_packet_async(ir, ir->usb_ep_out,
-+					     cmdbuf, sizeof(cmdbuf),
-+					     PHILUSB_OUTBOUND);
-+			return carrier;
-+		}
-+
-+		for (prescaler = 0; prescaler < 4; ++prescaler) {
-+			divisor = (clk >> (2 * prescaler)) / carrier;
-+			if (divisor <= 0xFF) {
-+				ir->carrier_freq = carrier;
-+				cmdbuf[2] = prescaler;
-+				cmdbuf[3] = divisor;
-+				dprintk(DRIVER_NAME "[%d]: SET_CARRIER "
-+					"requesting %d Hz\n",
-+					ir->devnum, carrier);
-+
-+				/* Transmit new carrier to mce device */
-+				request_packet_async(ir, ir->usb_ep_out,
-+						     cmdbuf, sizeof(cmdbuf),
-+						     PHILUSB_OUTBOUND);
-+				return carrier;
-+			}
-+		}
-+
-+		return -EINVAL;
-+
-+	}
-+
-+	return carrier;
-+}
-+
- static int input_open(struct input_dev *id)
- {
-     return 0;
-@@ -945,6 +1051,18 @@
-         if(lvalue!=(LIRC_MODE_PULSE&LIRC_CAN_SEND_MASK)) return -EINVAL;
-         break;
- 
-+    case LIRC_SET_SEND_CARRIER:
-+        /* Retrieve lirc_plugin data for the device */
-+        ir=lirc_get_pdata(filep);
-+        if (!ir && !ir->usb_ep_out) return -EFAULT;
-+
-+	result = get_user(ivalue, (unsigned int *) arg);
-+	if (result)
-+	    return result;
-+
-+	set_send_carrier(ir, ivalue);
-+	break;
-+
-     default:
-         return -ENOIOCTLCMD;
-     }
-@@ -1047,7 +1165,8 @@
-             plugin->minor = -1;
-             plugin->features = LIRC_CAN_SEND_PULSE |
-                                 LIRC_CAN_SET_TRANSMITTER_MASK |
--                                LIRC_CAN_REC_MODE2;
-+                                LIRC_CAN_REC_MODE2 |
-+                                LIRC_CAN_SET_SEND_CARRIER;
-             plugin->data = ir;
-             plugin->rbuf = rbuf;
-             plugin->set_use_inc = &set_use_inc;
-@@ -1108,7 +1227,7 @@
-     input_dev->name = ir->name;
-     input_dev->phys = ir->phys;
-     usb_to_input_id(dev, &input_dev->id);
--    input_dev->cdev.dev = &dev->dev;
-+    input_dev->dev.parent = &dev->dev;
-     input_dev->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
-     input_dev->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
-     input_dev->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X);