General bash comparison syntax cleanup.

3 files changed, 64 insertions, 78 deletions

diff --git a/abs/core-testing/LinHES-config-svn/install_functions.sh b/abs/core-testing/LinHES-config-svn/install_functions.sh
index ddade6d..4f6f7ed 100755
--- a/abs/core-testing/LinHES-config-svn/install_functions.sh
+++ b/abs/core-testing/LinHES-config-svn/install_functions.sh
@@ -38,7 +38,7 @@ update_db_settings Theme "$pick"
 
 function splash_setup (){
     echo $CMDLINE | grep -q splash=silent
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         update_db_settings Hostbootsplash 1
     else
@@ -61,7 +61,7 @@ function setupremote {
             update_db_settings HostRemoteType  "$Remotetype"
         #special case for special remote
         echo "Starting with support for $Remotetype"
-        if [ x$Remotetype = "xdvico" ]
+        if [ "$Remotetype" == "dvico" ]
         then
                 /usr/sbin/lircd  -d /dev/usb/hiddev0
         else
@@ -79,7 +79,7 @@ echo "Scanning for Hauppauge receiver"
 for hpgid in `lspci -nm  -d4444: |cut -d" " -f6-  |tr -d '"'|tr " " :`
 do
     line=`grep $hpgid $TEMPLATES/remotes/i2c.id`
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         modprobe lirc_i2c
         FoundReceiverType=`echo "$line"|cut -d"|" -f2`
@@ -102,7 +102,7 @@ while read line
 do
     USBID=`echo "$line"|cut -d"|"  -f1`
     lsusb -d "$USBID" > /dev/null 2>/dev/null
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         Remotetype=`echo "$line"|cut -d"|" -f2`
         echo "Found $Remotetype"
@@ -111,7 +111,7 @@ do
         break
     fi
 done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-if [ $found_remote = 1 ]
+if [ $found_remote -eq 1 ]
 then
     scan_for_hpg_receiver
 fi
@@ -125,7 +125,7 @@ fi
 function rest_of_network () {
     #netmask
     echo $CMDLINE | grep -q netmask
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*netmask=}
         NETMASK=${TEMPVAR%% *}
@@ -139,7 +139,7 @@ function rest_of_network () {
     fi
     #gateway
     echo $CMDLINE | grep -q gateway
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*gateway=}
         GATEWAY=${TEMPVAR%% *}
@@ -152,7 +152,7 @@ function rest_of_network () {
 
     #dns
     echo $CMDLINE | grep -q dns
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*dns=}
         DNS=${TEMPVAR%% *}
@@ -165,7 +165,7 @@ function rest_of_network () {
 
 function init_network {
     echo $CMDLINE |grep -q netdev
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*netdev=}
         MYTHDEFAULT=${TEMPVAR%% *}
@@ -176,7 +176,7 @@ function init_network {
 
 
     echo $CMDLINE | grep -q ip
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         update_db_settings HostDefaulteth0 0
         update_db_settings HostDefault${MYTHDEFAULT} 1
@@ -187,7 +187,7 @@ function init_network {
 
         TEMPVAR=${CMDLINE#*ip=}
         IP=${TEMPVAR%% *}
-        if [ x$IP = xdhcp ]
+        if [ "$IP" == "dhcp" ]
         then
             /sbin/dhcpcd $MYTHDEFAULT
             update_db_settings HostUseDHCP${MYTHDEFAULT} 0
@@ -202,11 +202,11 @@ function init_network {
 
 function init_remote {
     echo $CMDLINE | grep -q remoteport
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*remoteport=}
         REMOTEPORT=${TEMPVAR%% *}
-    if [ x"$ReceiverType" = "xSerial" ]
+    if [ "$ReceiverType" == "Serial" ]
     then
         if [ -e /dev/$REMOTEPORT ]
         then
@@ -220,7 +220,7 @@ function init_remote {
     fi
 
     echo $CMDLINE | grep -q remote
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*remote=}
         Remotetype=${TEMPVAR%% *}
@@ -239,7 +239,7 @@ ROOT=$1
 DATA=$2
 SWAP=$3
 
-if [ ! x$SWAP = xNO ]
+if [ "$SWAP" != "NO" ]
     then
         SWAPLINE=",$SWAP,S"
         MKSWAPCMD="mkswap /dev/${disk}2"
@@ -248,7 +248,7 @@ if [ ! x$SWAP = xNO ]
        MKSWAPCMD=""
     fi
 
-if [ x$DATA = xALL ]
+if [ "$DATA" == "ALL" ]
 then
     DATALINE=",,,"
     EXTRALINE=""
@@ -315,7 +315,7 @@ unmount_it () {
 
 copy_it () {
 
-        if [ x$1 = xALL ]
+        if [ "$1" == "ALL" ]
         then
             echo "Transferring system"
             unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
@@ -403,7 +403,7 @@ function find_uuid() {
 
 
 get_grub_map() {
-    rm /tmp/dev.map
+    [ -e /tmp/dev.map ] && rm /tmp/dev.map
     /sbin/grub --no-floppy --device-map /tmp/dev.map <<EOF
 quit
 EOF
@@ -422,17 +422,17 @@ mapdev() {
     fi
     for  dev in $devs
     do
-        if [ "(" = $(echo $dev | cut -b1) ]; then
+        if [ "(" == $(echo $dev | cut -b1) ]; then
         grubdevice="$dev"
         else
-        if [ "$dev" = "$linuxdevice" ]; then
+        if [ "$dev" == "$linuxdevice" ]; then
             device_found=1
             break
         fi
        fi
     done
-    if [ "$device_found" = "1" ]; then
-        if [ "$partition_flag" = "0" ]; then
+    if [ "$device_found" == "1" ]; then
+        if [ "$partition_flag" == "0" ]; then
             echo "$grubdevice"
         else
             grubdevice_stringlen=${#grubdevice}
@@ -461,7 +461,7 @@ dogrub() {
         #/usr/sbin/xfs_freeze -f /$mountpoint > /dev/null 2>&1
         echo "freezing xfs fs"
         /usr/sbin/xfs_freeze -f /$mountpoint
-        if [ $? = 0 ]
+        if [ $? -eq 0 ]
         then
             sleep 40
             echo "unfreezing xfs"
@@ -531,7 +531,7 @@ case $1 in
                         create_fstab
                     fi
                     #was 5
-                    if [ x$3 = xUPGRADE ]
+                    if [ "$3" == "UPGRADE" ]
                     then
                        if [ ! -f /tmp/etc/KnoppMyth-version ]
                        then
@@ -558,11 +558,11 @@ case $1 in
                       SWAPUUID=$FOUNDUUID
 
                       FOUNDUUID=""
-                      if [ x$4 = x ]
+                      if [ "$4" == "" ]
                       then
                         #upgrade
                         find_uuid ${2}3
-                      elif [ x$5 = xFULL_INSTALL ]
+                      elif [ "$5" == "FULL_INSTALL" ]
                       then
                         #install
                         find_uuid ${2}3
@@ -585,7 +585,7 @@ case $1 in
                         if [ -f /tmp/etc/fstab ]
                         then
                             grep -q /dev/vg /tmp/etc/fstab
-                            if [ $? = 0 ]
+                            if [ $? -eq 0 ]
                             then
                                 grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
                                 grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh
index ce9a057..9f38384 100755
--- a/abs/core-testing/LinHES-config/install_functions.sh
+++ b/abs/core-testing/LinHES-config/install_functions.sh
@@ -38,7 +38,7 @@ update_db_settings Theme "$pick"
 
 function parse_cmdline_2_db(){
     echo $CMDLINE | grep -q displayres
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*displayres=}
         update_db_settings HostXres $TEMPVAR
@@ -49,7 +49,7 @@ function parse_cmdline_2_db(){
 
 function bootsplash_setup (){
     echo $CMDLINE | grep -q splash=silent
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         update_db_settings Hostbootsplash 1
     else
@@ -72,7 +72,7 @@ function setupremote {
             update_db_settings HostRemoteType  "$Remotetype"
         #special case for special remote
         printhl "Starting with support for $Remotetype"
-        if [ x$Remotetype = "xdvico" ]
+        if [ "$Remotetype" == "dvico" ]
         then
                 /usr/sbin/lircd  -d /dev/usb/hiddev0
         else
@@ -90,7 +90,7 @@ printhl "   Scanning for Hauppauge receiver"
 for hpgid in `lspci -nm  -d4444: |cut -d" " -f6-  |tr -d '"'|tr " " :`
 do
     line=`grep $hpgid $TEMPLATES/remotes/i2c.id`
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         modprobe lirc_i2c
         FoundReceiverType=`echo "$line"|cut -d"|" -f2`
@@ -131,7 +131,7 @@ while read line
 do
     USBID=`echo "$line"|cut -d"|"  -f1`
     lsusb -d "$USBID" > /dev/null 2>/dev/null
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         Remotetype=`echo "$line"|cut -d"|" -f2`
         printhl  "Found $Remotetype"
@@ -140,7 +140,7 @@ do
         break
     fi
 done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-if [ $found_remote = 1 ]
+if [ $found_remote -eq 1 ]
 then
     scan_for_hpg_receiver
 fi
@@ -154,7 +154,7 @@ fi
 function rest_of_network () {
     #netmask
     echo $CMDLINE | grep -q netmask
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*netmask=}
         NETMASK=${TEMPVAR%% *}
@@ -168,7 +168,7 @@ function rest_of_network () {
     fi
     #gateway
     echo $CMDLINE | grep -q gateway
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*gateway=}
         GATEWAY=${TEMPVAR%% *}
@@ -180,7 +180,7 @@ function rest_of_network () {
 
     #dns
     echo $CMDLINE | grep -q dns
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*dns=}
         DNS=${TEMPVAR%% *}
@@ -193,7 +193,7 @@ function rest_of_network () {
 
 function init_network {
     echo $CMDLINE |grep -q netdev
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*netdev=}
         MYTHDEFAULT=${TEMPVAR%% *}
@@ -204,7 +204,7 @@ function init_network {
 
 
     echo $CMDLINE | grep -q ip
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         update_db_settings HostDefaulteth0 0
         update_db_settings HostDefault${MYTHDEFAULT} 1
@@ -215,7 +215,7 @@ function init_network {
 
         TEMPVAR=${CMDLINE#*ip=}
         IP=${TEMPVAR%% *}
-        if [ x$IP = xdhcp ]
+        if [ "$IP" == "dhcp" ]
         then
             /sbin/dhcpcd $MYTHDEFAULT
             update_db_settings HostUseDHCP${MYTHDEFAULT} 0
@@ -230,7 +230,7 @@ function init_network {
 
 function init_remote {
     echo $CMDLINE | grep -q remoteport
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*remoteport=}
         REMOTEPORT=${TEMPVAR%% *}
@@ -248,7 +248,7 @@ function init_remote {
     fi
 
     echo $CMDLINE | grep -q remote
-    if [ $? = 0 ]
+    if [ $? -eq 0 ]
     then
         TEMPVAR=${CMDLINE#*remote=}
         Remotetype=${TEMPVAR%% *}
@@ -267,7 +267,7 @@ ROOT=$1
 DATA=$2
 SWAP=$3
 
-if [ ! x$SWAP = xNO ]
+if [ ! "$SWAP" == "NO" ]
     then
         SWAPLINE=",$SWAP,S"
         MKSWAPCMD="mkswap /dev/${disk}2"
@@ -276,7 +276,7 @@ if [ ! x$SWAP = xNO ]
        MKSWAPCMD=""
     fi
 
-if [ x$DATA = xALL ]
+if [ "$DATA" == "ALL" ]
 then
     DATALINE=",,,"
     EXTRALINE=""
@@ -343,7 +343,7 @@ unmount_it () {
 
 copy_it () {
 
-        if [ x$1 = xALL ]
+        if [ "$1" == "ALL" ]
         then
             echo "Transferring system"
             unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
@@ -431,7 +431,7 @@ function find_uuid() {
 
 
 get_grub_map() {
-    rm /tmp/dev.map
+    [ -e /tmp/dev.map ] && rm /tmp/dev.map
     /sbin/grub --no-floppy --device-map /tmp/dev.map <<EOF
 quit
 EOF
@@ -489,7 +489,7 @@ dogrub() {
         #/usr/sbin/xfs_freeze -f /$mountpoint > /dev/null 2>&1
         echo "freezing xfs fs"
         /usr/sbin/xfs_freeze -f /$mountpoint
-        if [ $? = 0 ]
+        if [ $? -eq 0 ]
         then
             sleep 40
             echo "unfreezing xfs"
@@ -559,7 +559,7 @@ case $1 in
                         create_fstab
                     fi
                     #was 5
-                    if [ x$3 = xUPGRADE ]
+                    if [ "$3" == "UPGRADE" ]
                     then
                        if [ ! -f /tmp/etc/KnoppMyth-version ]
                        then
@@ -586,11 +586,11 @@ case $1 in
                       SWAPUUID=$FOUNDUUID
 
                       FOUNDUUID=""
-                      if [ x$4 = x ]
+                      if [ "$4" == "" ]
                       then
                         #upgrade
                         find_uuid ${2}3
-                      elif [ x$5 = xFULL_INSTALL ]
+                      elif [ "$5" == "FULL_INSTALL" ]
                       then
                         #install
                         find_uuid ${2}3
@@ -613,7 +613,7 @@ case $1 in
                         if [ -f /tmp/etc/fstab ]
                         then
                             grep -q /dev/vg /tmp/etc/fstab
-                            if [ $? = 0 ]
+                            if [ $? -eq 0 ]
                             then
                                 grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
                                 grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
diff --git a/abs/core-testing/LinHES-config/ir_config.sh b/abs/core-testing/LinHES-config/ir_config.sh
index 69d8406..28134e2 100644
--- a/abs/core-testing/LinHES-config/ir_config.sh
+++ b/abs/core-testing/LinHES-config/ir_config.sh
@@ -2,8 +2,7 @@ function include_lirc () {
     config_file=$1
     include_file=$2
     grep -q  ${include_file} ${config_file}
-    if [ $? = 0 ]
-    then
+    if [ "$?" == "0" ]; then
         echo ${include_file} already present
     else
         echo "include \"${include_file}\"" >> $config_file
@@ -39,8 +38,7 @@ function setup_ir_remote {
             #make backup copy
             mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
             mv ${BASE}/etc/lircrc ${BASE}/etc/lircrc.`date +%Y-%m-%d-%H-%M`
-            if [ $HostBlasterType = pvr150 ]
-            then
+            if [ "$HostBlasterType" == "pvr150" ]; then
                 Remotetype=hauppauge-blaster
             fi
 
@@ -58,18 +56,15 @@ function setup_ir_remote {
             chmod 755 /etc/lircrc
             daemon_add="lircd $daemon_add"
             #standard location for mythtv lircrc
-            if [ ! -e /home/mythtv/.mythtv/lircrc ]
-            then
-                if [ ! -d /home/mythtv/.mythtv ]
-                then
+            if [ ! -e /home/mythtv/.mythtv/lircrc ]; then
+                if [ ! -d /home/mythtv/.mythtv ]; then
                     mkdir /home/mythtv/.mythtv
                     chown mythtv:mythtv /home/mythtv/.mythtv
                 fi
                 ln -s /etc/lircrc /home/mythtv/.mythtv/lircrc 2> /dev/null
             fi
             #standard location for lircrc
-            if [ ! -e /home/mythtv/.lircrc ]
-            then
+            if [ ! -e /home/mythtv/.lircrc ]; then
                 ln -s /etc/lircrc /home/mythtv/.lircrc 2> /dev/null
             fi
 #             echo "Sending hup to lircd"
@@ -141,16 +136,14 @@ function setup_lcd () {
             x) echo "empty lcd" ;;
 
             *) echo "setup lcd"
-                if [ -f $TEMPLATES/LCD/$LCDtype/modules  ]
-                then
+                if [ -f $TEMPLATES/LCD/$LCDtype/modules  ]; then
                     sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
                     cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage
                 #should also modprobe
                 fi
 
 
-                if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]
-                then
+                if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]; then
                     cp_and_log  $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc
                 # install="lcdproc $install"
                     daemon_add="lcdd $daemon_add"
@@ -160,10 +153,8 @@ function setup_lcd () {
                 fi
                 #check if lirc capable,if so then call setupremote
                 #if not in tinker mode check for remote
-                if [ ! x$Remotetype = xtinker ]
-                then
-                    if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
-                    then
+                if [ "$Remotetype" != "tinker" ]; then
+                    if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]; then
                         cd $TEMPLATES/LCD/$LCDtype
                         for i in lircd*
                         do
@@ -182,18 +173,15 @@ function setup_lcd () {
 }
 
 function setup_blaster_proto () {
-    if [ x$HostBlasterType = x ]
-    then
+    if [ "$HostBlasterType" == "" ]; then
         HostBlasterType = "crap"
     fi
-    if [ ! $HostBlasterType = pvr150 -a ! $HostBlasterType = None ]
-    then
+    if [[ ("$HostBlasterType" != "pvr150") && ("$HostBlasterType" != "None") ]]; then
         for i in `seq $Hostnumblaster`
         do
             TEMP=HostTransmitproto_$i
             eval proto=\$${TEMP}
-            if [ -f $TEMPLATES/transmit/${proto}/lircd.conf ]
-            then
+            if [ -f $TEMPLATES/transmit/${proto}/lircd.conf ]; then
                 include_lirc  ${BASE}/etc/lircd.conf $TEMPLATES/transmit/${proto}/lircd.conf
             fi
         done
@@ -207,8 +195,7 @@ function setup_blaster_proto () {
 function setup_blaster_transmiter () {
     echo "setup_blaster_transmiter"
     #if it's Reciever type, then these modules have already been loaded.
-    if [ ! x$HostBlasterType = xReceiver ]
-    then
+    if [ "$HostBlasterType" != "Receiver" ]; then
         case $HostBlasterType in
             None) echo "no blaster"
                   sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage
@@ -235,8 +222,7 @@ function setup_blaster_transmiter () {
 }
 
 function setupir () {
-   if [ ! x$Remotetype = xtinker ]
-   then
+   if [ "$Remotetype" != "tinker" ]; then
         setup_ir_remote
         setup_ir_receiver
         unload_all_lirc