summaryrefslogtreecommitdiffstats
path: root/abs
diff options
context:
space:
mode:
authorJames Meyer <james.meyer@operamail.com>2011-10-31 18:45:54 (GMT)
committerJames Meyer <james.meyer@operamail.com>2011-10-31 18:45:54 (GMT)
commitbae5fd65e6831ac5c641739d1e7594c24966a55e (patch)
treea35809c3ed6ad9c7f1a532176e84c9083d78ef90 /abs
parent634cea5bcd7fd9a23b303a5ad955310ed6218972 (diff)
downloadlinhes_pkgbuild-bae5fd65e6831ac5c641739d1e7594c24966a55e.zip
linhes_pkgbuild-bae5fd65e6831ac5c641739d1e7594c24966a55e.tar.gz
linhes_pkgbuild-bae5fd65e6831ac5c641739d1e7594c24966a55e.tar.bz2
system-templates: add lcdproc support for nmedia branded LCD
Diffstat (limited to 'abs')
-rwxr-xr-xabs/core/system-templates/PKGBUILD2
-rw-r--r--abs/core/system-templates/templates/LCD/nmedia/LCDd.conf869
2 files changed, 870 insertions, 1 deletions
diff --git a/abs/core/system-templates/PKGBUILD b/abs/core/system-templates/PKGBUILD
index 224b93e..1cf109e 100755
--- a/abs/core/system-templates/PKGBUILD
+++ b/abs/core/system-templates/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=system-templates
pkgver=2.0
-pkgrel=7
+pkgrel=8
conflicts=( )
pkgdesc="Templates used for system configuration"
depends=()
diff --git a/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf b/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf
new file mode 100644
index 0000000..33400b4
--- /dev/null
+++ b/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=lis
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as. LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+# specific setup! Otherwise LCDd won't be able to find
+# the driver modules and will thus not be able to
+# function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50 # Brightness (in %) if applicable
+Contrast=50 # Contrast (in %) if applicable
+Backlight=no # Backlight if applicable
+UpsideDown=no # flip image upside down
+Invert=no # invert light/dark pixels
+ShowDebugFrame=no # turns on/off 1 pixel thick debugging
+ # border whithin the usable text area,
+ # for setting up TextResolution and
+ # MinFontFaceSize (if using FT2);
+ShowBigBorder=no # border around the unused area
+ShowThinBorder=yes # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+# KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+# KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname Function
+# Normal context Menu context
+# ------- -------------- ------------
+# PauseKey Pause/Continue Enter/select
+# BackKey Back(Go to previous screen) Up/Left
+# ForwardKey Forward(Go to next screen) Down/Right
+# MainMenuKey Open main menu Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+# as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+# is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's. ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF