diff options
42 files changed, 1961 insertions, 3221 deletions
diff --git a/abs/core/LinHES-config/PKGBUILD b/abs/core/LinHES-config/PKGBUILD index c7cf189..9f1584c 100755 --- a/abs/core/LinHES-config/PKGBUILD +++ b/abs/core/LinHES-config/PKGBUILD @@ -1,6 +1,6 @@ pkgname=LinHES-config pkgver=8.0 -pkgrel=1 +pkgrel=5 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev LinHes-config ) pkgdesc="Install and configure your system" depends=('bc' 'libstatgrab' 'mysql-python' 'expect' 'curl' 'dnsutils' 'parted' @@ -133,7 +133,7 @@ build() { install -o root -g root -D -m 0755 blacklist_pcspkr.conf $startdir/pkg/etc/modprobe.d/blacklist_pcspkr.conf install -o root -g root -D -m 0755 blacklist_nouveau.conf $startdir/pkg/etc/modprobe.d/blacklist_nouveau.conf } -md5sums=('7cdc9bc678ab02a2d30444e20a3c71eb' +md5sums=('c832059cd635359d39a2ac3166ff463c' '3f6855b7bb860a44f96a972c2e80f497' 'aaeb581275433649ff74e05da5e61a78' '2596460462cf6c889cf8f95485537b20' @@ -159,7 +159,7 @@ md5sums=('7cdc9bc678ab02a2d30444e20a3c71eb' 'c0549457750c4f8e8038d904a0f3012a' '3d1e3c7315881a109fb089a540d2262c' 'b845de3e05c1734cce4b9ac5e8f1baaf' - '33941466545815c58e8e49190cf04eaa' + '31ad5416bf2ab1909338a16035941127' '8b7dce4a3a0a281fa6656aa8781a648e' 'f7f2dc11d1ba454cd25eeaa133104b62' '824e49d9b01fed295c704ab68908b464' @@ -171,7 +171,7 @@ md5sums=('7cdc9bc678ab02a2d30444e20a3c71eb' '299c24c0820fc9c483c820db2595e3cb' 'cf51cb22e23218ae7e9b55cac1ba3a7f' 'e4b61402858058f7575b776d62d5ee89' - 'c2ef0f1140bd3fbeb44294fdf5415a32' + '1a17256202d851f37c54f2836c244b5d' '2596460462cf6c889cf8f95485537b20' 'dc3c5270691a62600475705f4cb78b56' '4804aa93aaad3dfcfff08cd9ffd68836' diff --git a/abs/core/LinHES-config/mv_install.py b/abs/core/LinHES-config/mv_install.py index 1128571..57b784b 100755 --- a/abs/core/LinHES-config/mv_install.py +++ b/abs/core/LinHES-config/mv_install.py @@ -259,7 +259,7 @@ def blank_table(diskdevice): cmd = "parted %s --script -- mklabel msdos" %diskdevice runcmd(cmd) - logging.debug("parition table after:") + logging.debug("partition table after:") cmd = "fdisk -l %s" %diskdevice runcmd(cmd) @@ -392,35 +392,128 @@ def set_active_parition(diskdevice): logging.info(" Depending on your system this may not matter") +#def partition_disk(): + #global hostoptions + #logging.info("Partitioning") + #logging.debug("____start of partition_disk____") + #rootdisk = hostoptions["rootdisk"] + #datadisk = hostoptions["datadisk"] + #label = "root" + #partitions_removeall("/dev/"+rootdisk, label) + #label = "data" + #partitions_removeall("/dev/"+datadisk, label) + #hostoptions["rootpartition"] = create_partitions("/dev/"+rootdisk, hostoptions["rootsize"], "NORMAL", 0) + #set_active_parition("/dev/"+rootdisk) + + #hostoptions["swappartition"] = create_partitions("/dev/"+rootdisk, hostoptions["swapsize"], "SWAP", 1) + + ##create extended partition + #hostoptions["extended_partition"] = create_partitions("/dev/"+rootdisk, "all", "EXTENDED", 1) + + ##create the logical in the extended + #hostoptions["home_partition"] = create_partitions("/dev/"+rootdisk, hostoptions["homesize"], "LOGICAL", 1) + #hostoptions["sql_partition"] = create_partitions("/dev/"+rootdisk, hostoptions["sqlsize"], "LOGICAL", 1) + + #if datadisk != rootdisk: + #hostoptions["datapartition"] = create_partitions("/dev/"+datadisk, hostoptions["datasize"], "NORMAL", 0) + #else: + #hostoptions["datapartition"] = create_partitions("/dev/"+datadisk, hostoptions["datasize"], "LOGICAL", 1) + + #logging.debug("sleeping for 5 seconds") + #time.sleep(5) + + +#parted /dev/sda -a optimal --script mklabel gpt +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 1 500 +#parted /dev/sda -a optimal --script unit MB -- mkpart swap 501 600 +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 601 601 +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 601 601 + +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 604 700 +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 700 800 +#parted /dev/sda -a optimal --script unit MB -- mkpart primary 800 -1 + +def create_partitions_gpt(diskdevice, start,size,partition_type): + logging.debug("_____Create partitions gpt ______") + if size == "NO" or size == "no": + logging.info("Size is 0, skipping") + last_sector = start + elif size == "all" or size == "ALL": + logging.info("Size is all, using rest of disk") + last_sector = "-1" + else: + last_sector = start + int(size) + + cmd = "parted %s -a optimal --script unit MB -- mkpart primary %s %s" %(diskdevice, start, last_sector) + runcmd(cmd) + + newstart = last_sector + #print newstart + return newstart + + + + + + def partition_disk(): global hostoptions logging.info("Partitioning") logging.debug("____start of partition_disk____") - rootdisk = hostoptions["rootdisk"] - datadisk = hostoptions["datadisk"] + rootdisk = "/dev/%s" %(hostoptions["rootdisk"]) + datadisk = "/dev/%s" %(hostoptions["datadisk"]) label = "root" - partitions_removeall("/dev/"+rootdisk, label) + partitions_removeall(rootdisk, label) label = "data" - partitions_removeall("/dev/"+datadisk, label) - hostoptions["rootpartition"] = create_partitions("/dev/"+rootdisk, hostoptions["rootsize"], "NORMAL", 0) - set_active_parition("/dev/"+rootdisk) + partitions_removeall(datadisk, label) + #create gpt table + cmd = "parted %s -a optimal --script mklabel gpt" %rootdisk + runcmd(cmd) + cmd = "parted %s -a optimal --script mklabel gpt" %datadisk + runcmd(cmd) + + start_sector = 1 + start_sector = create_partitions_gpt(rootdisk, start_sector, hostoptions["rootsize"], "primary") + start_sector = create_partitions_gpt(rootdisk, start_sector, hostoptions["swapsize"], "primary") + hostoptions["rootpartition"] = hostoptions["rootdisk"]+str(1) + hostoptions["swappartition"] = hostoptions["rootdisk"] + str(2) + hostoptions["home_partition"] = hostoptions["rootdisk"]+str(5) + hostoptions["sql_partition"] = hostoptions["rootdisk"]+str(6) + hostoptions["datapartition"] = hostoptions["datadisk"]+str(7) + + + #create 1 blank to match up with extended/logical layout from 8.0 + start_sector = create_partitions_gpt(rootdisk, start_sector, "NO", "primary") + + #create gtp boot + start_sector = start_sector + 1 + start_sector = create_partitions_gpt(rootdisk, start_sector, 2 , "primary") + cmd = "parted %s set 4 bios_grub on" %rootdisk + runcmd(cmd) + + #create home_partition + start_sector = start_sector + 1 + start_sector = create_partitions_gpt(rootdisk, start_sector, hostoptions["homesize"], "primary") + + ##create mysql + start_sector = start_sector + 1 + start_sector = create_partitions_gpt(rootdisk, start_sector, hostoptions["sqlsize"], "primary") + + start_sector = start_sector + 1 + #create data + if datadisk != rootdisk: + create_partitions_gpt(datadisk, 1, hostoptions["datasize"], "primary") + else: + create_partitions_gpt(datadisk, start_sector, hostoptions["datasize"], "primary") + + logging.debug("sleeping for 5 seconds") + time.sleep(5) + - hostoptions["swappartition"] = create_partitions("/dev/"+rootdisk, hostoptions["swapsize"], "SWAP", 1) - #create extended partition - hostoptions["extended_partition"] = create_partitions("/dev/"+rootdisk, "all", "EXTENDED", 1) - #create the logical in the extended - hostoptions["home_partition"] = create_partitions("/dev/"+rootdisk, hostoptions["homesize"], "LOGICAL", 1) - hostoptions["sql_partition"] = create_partitions("/dev/"+rootdisk, hostoptions["sqlsize"], "LOGICAL", 1) - if datadisk != rootdisk: - hostoptions["datapartition"] = create_partitions("/dev/"+datadisk, hostoptions["datasize"], "NORMAL", 0) - else: - hostoptions["datapartition"] = create_partitions("/dev/"+datadisk, hostoptions["datasize"], "LOGICAL", 1) - logging.debug("sleeping for 5 seconds") - time.sleep(5) def fscmd(fstype): @@ -1466,6 +1559,9 @@ def restore_default_settings(): cmd = "%s/bin/myth_settings_wrapper.sh -c save -t syssettings -h %s -d localhost" %(MVROOT, data_config.MVHOSTNAME) runcmd(cmd) SE = os.environ["TEMPLATES"]+"/settings/syssettings/" + #this is needed because the settings dir is no longer part of the templates pkg + cmd="mkdir -p %s" %(data_config.MOUNTPOINT+SE) + runcmd(cmd) cp_and_log(SE, data_config.MOUNTPOINT+SE) cp_and_log("/etc/mtab", data_config.MOUNTPOINT+"/etc/mtab") copy_updates() @@ -1530,7 +1626,7 @@ def full_install(hostoptions): partition_disk() else: logging.debug(" Debug mode, skipping partitioning step") - + #sys.exit(0) # Format disk statusmsg = "Preparing %s" %( hostoptions["rootdisk"]) update_status(statusmsg) @@ -2163,9 +2259,6 @@ for line in config_file: - - - if __name__ == "__main__": config_file = "mv_config" data_config = __import__(config_file, globals(), locals(), []) diff --git a/abs/core/LinHES-config/mv_ir.py b/abs/core/LinHES-config/mv_ir.py index 40e5fee..f481fa4 100755 --- a/abs/core/LinHES-config/mv_ir.py +++ b/abs/core/LinHES-config/mv_ir.py @@ -56,18 +56,19 @@ def add_module(filename,module): cmd = ''' echo "%s" >> %s ''' %(module,filename) mv_common.runcmd(cmd) -def unload_all_lirc(Remotetype): - logging.debug(" Unloading all remote modules") - #ati bucket specific - if "snapstream_firefly" in Remotetype : - cmd = "rmmod ati_remote" +def unload_all_lirc(Remotetype, this_is_install): + if this_is_install == False: + logging.debug(" Unloading all remote modules") + #ati bucket specific + if "snapstream_firefly" in Remotetype : + cmd = "rmmod ati_remote" + mv_common.runcmd(cmd) + cmd = "sv stop remotes" + mv_common.runcmd(cmd) + cmd = "killall -9 lircd" + mv_common.runcmd(cmd) + cmd = '''modprobe -r $(lsmod |grep ^lirc |awk '{print $1}') ''' mv_common.runcmd(cmd) - cmd = "sv stop remotes" - mv_common.runcmd(cmd) - cmd = "killall -9 lircd" - mv_common.runcmd(cmd) - cmd = '''modprobe -r $(lsmod |grep ^lirc |awk '{print $1}') ''' - mv_common.runcmd(cmd) @@ -135,6 +136,48 @@ def setup_ir_remote(Remotetype,templates,mythhome,HostBlasterType,remotebucket): cmd = "cp %s /etc/remote.run" %filename mv_common.runcmd(cmd) + #if remote has a special xbmc file, use it. + xbmcfile= remote_path + "/xbmc.xml" + userxmbcfile = mythhome+"/.xbmc/userdata/Lircmap.xml" + + if os.path.exists(xbmcfile): + logging.debug(" XBMC lirc file present") + logging.info(" Setting up lirc for xbmc") + if not os.path.exists(mythhome+"/.xbmc/userdata"): + logging.debug(" Creating %s/.xbmc",mythhome) + try: + os.mkdir(mythhome+"/.xbmc") + except: + logging.debug(" Couldn't create .xbmc/ ") + try: + os.mkdir(mythhome+"/.xbmc/userdata/") + except: + logging.debug(" Couldn't create .xbmc/userdata ") + + try: + cmd = ''' chown -R mythtv %s/.xbmc''' %mythhome + mv_common.runcmd(cmd) + cmd = ''' chgrp -R mythtv %s/.xbmc/userdata''' %mythhome + mv_common.runcmd(cmd) + except: + logging.debug(" Couldn't change permissions for .xbmc") + pass + try: + cmd = ''' rm -f %s''' %(userxmbcfile) + mv_common.runcmd(cmd) + logging.debug(" Creating symlink for xmbc lircrc") + os.symlink(xbmcfile, mythhome+"/.xbmc/userdata/Lircmap.xml") + except: + pass + else: + logging.debug(" XBMC lirc file %s not present" %xbmcfile) + + + + + + + #remote has it's own modprobe.d/conf filename cmd = "rm -f /etc/modprobe.d/mv_ir.conf" mv_common.runcmd(cmd) @@ -273,7 +316,7 @@ def setup_blaster_transmiter(HostBlasterType): else: scrub_modules("/etc/modules.mythvantage","blaster") -def setup_lcd(LCDtype, TEMPLATES, Remotetype): +def setup_lcd(LCDtype, TEMPLATES, Remotetype, this_is_install): logging.debug("____Start of setup_lcd____") logging.debug(" LCDType: %s", LCDtype) logging.debug(" Remotetype: %s", Remotetype) @@ -286,8 +329,9 @@ def setup_lcd(LCDtype, TEMPLATES, Remotetype): cmd = "sv stop lcdd" mv_common.runcmd(cmd) #sometimes it doesn't want to die - cmd = "killall -9 LCDd" - mv_common.runcmd(cmd) + if this_is_install == False: + cmd = "killall -9 LCDd" + mv_common.runcmd(cmd) cmd = "load-modules-mythvantage.sh UNLOAD LCD" mv_common.runcmd(cmd) scrub_modules("/etc/modules.mythvantage", "LCD") @@ -336,7 +380,7 @@ def setup_lcd(LCDtype, TEMPLATES, Remotetype): mv_common.restart_service("lcdd") logging.debug("__End of setup_lcd") -def setup_ir(systemconfig, data_config): +def setup_ir(systemconfig, data_config, this_is_install): rc = [ False , False ] if mv_common.read_config(mv_common.module_config,"ir") == False : logging.info("____Skipping of IR, config disabled____") @@ -372,7 +416,7 @@ def setup_ir(systemconfig, data_config): systemconfig.get("mythip")) else: setup_ir_receiver("unknown", systemconfig.get("TEMPLATES"),'','127.0.0.1') - unload_all_lirc(remotetype) + unload_all_lirc(remotetype, this_is_install) setup_blaster_proto(HostBlasterType, Hostnumblaster, systemconfig.get("TEMPLATES"), @@ -388,7 +432,8 @@ def setup_ir(systemconfig, data_config): if systemconfig.get("LCDtype"): setup_lcd(systemconfig.get("LCDtype"), systemconfig.get("TEMPLATES"), - systemconfig.get("Remotetype")) + systemconfig.get("Remotetype"), + this_is_install) else: logging.debug(" LCD not defined") logging.info("__End IR\n") diff --git a/abs/core/LinHES-config/systemconfig.py b/abs/core/LinHES-config/systemconfig.py index d9c83b7..f7e3f5d 100755 --- a/abs/core/LinHES-config/systemconfig.py +++ b/abs/core/LinHES-config/systemconfig.py @@ -255,7 +255,7 @@ def main(argv): if cmdmodule["ir"] == True: import mv_ir - restart = mv_ir.setup_ir(systemconfig,data_config) + restart = mv_ir.setup_ir(systemconfig,data_config,cmdmodule["this_is_install"]) restartfe = restart[0] restartlcd = restart[1] if restartfe == True : diff --git a/abs/core/LinHES-system/LinHES-session b/abs/core/LinHES-system/LinHES-session index 61405db..27ce2bd 100755 --- a/abs/core/LinHES-system/LinHES-session +++ b/abs/core/LinHES-system/LinHES-session @@ -243,8 +243,15 @@ function update_apple_trailers(){ fi } +function first_mythwelcome_config(){ + echo "First configure: Running mythwelcome-config.py" + /usr/LH/bin/mythwelcome-config.py + } + + function first_configure(){ + first_mythwelcome_config if [ ! x$STARTUP_STYLE = xlegacy ] then first_configure_mv diff --git a/abs/core/LinHES-system/PKGBUILD b/abs/core/LinHES-system/PKGBUILD index a049353..fd167c1 100755 --- a/abs/core/LinHES-system/PKGBUILD +++ b/abs/core/LinHES-system/PKGBUILD @@ -1,6 +1,6 @@ pkgname=LinHES-system pkgver=8.0 -pkgrel=1 +pkgrel=2 arch=('i686' 'x86_64') MVDIR=$startdir/pkg/usr/LH BINDIR=$startdir/pkg/usr/bin @@ -81,7 +81,7 @@ build() { } -md5sums=('08abf577578dd805bab7cd9eba90965a' +md5sums=('8fc4b7c1ddf8f3c4d2266ce55086b4d4' 'de32a1c50101265dd7f6ca5037f7a26a' 'a875ee97f86e46f34a741c2bc455f894' '76b2637cac0452b3acdbeeb4e8a5474b' diff --git a/abs/core/mythinstall/PKGBUILD b/abs/core/mythinstall/PKGBUILD index 7a953a5..b95d720 100644 --- a/abs/core/mythinstall/PKGBUILD +++ b/abs/core/mythinstall/PKGBUILD @@ -1,7 +1,7 @@ # Maintainer: Jams pkgname=mythinstall pkgver=3 -pkgrel=76 +pkgrel=77 pkgdesc="LinHES installer/systemconfig GUI." arch=('i686' 'x86_64') depends=('mythtv>=0.25') @@ -30,9 +30,10 @@ build() { } md5sums=('39d6b7bd1ee305c5523a3cf66d4c2338' - '137ba1bf74cc13feb1ca0038dc5ed5fc' - '1d5064ac3c871f0aa895c95a71ba5c97' - 'b4f9b52cdd2936e0a8dd4e3dd7cac344' - '4e748680e67ff8bd0614fd5c63abda9c' - '72fc7d8147c08336dd1064f9051f43ea' - 'f6705520bc0a6655157cd14efdaac746') + '3291ad55fe6d7884fc732313f1cc2924' + '80c0326a253df275afbe875a8ec14a3c' + '46925d6fbcb7ec1fc51714d03ac6b72d' + '27ce7f89a83864dfc5abe23c61964c0c' + '2e85a1b9559557dade6e87daf2abb673' + '7f3045f740760c828e2e18293c2a4ab1' + '91393e9cca0e6168f772fb48c88d3829') diff --git a/abs/core/mythinstall/logo-1.png b/abs/core/mythinstall/logo-1.png Binary files differindex 5a4293c..a63adab 100644 --- a/abs/core/mythinstall/logo-1.png +++ b/abs/core/mythinstall/logo-1.png diff --git a/abs/core/mythinstall/logo-2.png b/abs/core/mythinstall/logo-2.png Binary files differindex cb6f152..2b6e9b7 100644 --- a/abs/core/mythinstall/logo-2.png +++ b/abs/core/mythinstall/logo-2.png diff --git a/abs/core/mythinstall/logo-3.png b/abs/core/mythinstall/logo-3.png Binary files differindex 0a59252..8fff988 100644 --- a/abs/core/mythinstall/logo-3.png +++ b/abs/core/mythinstall/logo-3.png diff --git a/abs/core/mythinstall/logo-4.png b/abs/core/mythinstall/logo-4.png Binary files differindex 6e70af7..81012a3 100644 --- a/abs/core/mythinstall/logo-4.png +++ b/abs/core/mythinstall/logo-4.png diff --git a/abs/core/mythinstall/logo-5.png b/abs/core/mythinstall/logo-5.png Binary files differindex 6f1ac44..8bd708d 100644 --- a/abs/core/mythinstall/logo-5.png +++ b/abs/core/mythinstall/logo-5.png diff --git a/abs/core/mythinstall/logo-6.png b/abs/core/mythinstall/logo-6.png Binary files differindex 4c60fe6..d370e2e 100644 --- a/abs/core/mythinstall/logo-6.png +++ b/abs/core/mythinstall/logo-6.png diff --git a/abs/core/mythinstall/logo-7.png b/abs/core/mythinstall/logo-7.png Binary files differnew file mode 100644 index 0000000..55a6cda --- /dev/null +++ b/abs/core/mythinstall/logo-7.png diff --git a/abs/core/mythinstall/logo_src/ermine.png b/abs/core/mythinstall/logo_src/ermine.png Binary files differnew file mode 100644 index 0000000..792f7cc --- /dev/null +++ b/abs/core/mythinstall/logo_src/ermine.png diff --git a/abs/core/mythtv/stable-0.25/git_src/git_hash b/abs/core/mythtv/stable-0.25/git_src/git_hash index e29adf1..474b835 100644 --- a/abs/core/mythtv/stable-0.25/git_src/git_hash +++ b/abs/core/mythtv/stable-0.25/git_src/git_hash @@ -1 +1 @@ -79a24c90efd3308895880cbad4a4e550986aedda +ed3b7d10a63178bff5ce4134613ff86a85d73830 diff --git a/abs/core/mythtv/stable-0.25/mythplugins/PKGBUILD b/abs/core/mythtv/stable-0.25/mythplugins/PKGBUILD index e5dea15..3228a58 100644 --- a/abs/core/mythtv/stable-0.25/mythplugins/PKGBUILD +++ b/abs/core/mythtv/stable-0.25/mythplugins/PKGBUILD @@ -12,7 +12,7 @@ pkgname=('mytharchive' 'mythweather' 'mythzoneminder') pkgver=0.25 -pkgrel=17 +pkgrel=18 arch=('i686' 'x86_64') url="http://www.mythtv.org" diff --git a/abs/core/mythtv/stable-0.25/mythtv/PKGBUILD b/abs/core/mythtv/stable-0.25/mythtv/PKGBUILD index 3da2079..730bb71 100644 --- a/abs/core/mythtv/stable-0.25/mythtv/PKGBUILD +++ b/abs/core/mythtv/stable-0.25/mythtv/PKGBUILD @@ -6,7 +6,7 @@ pkgname=mythtv pkgver=0.25 -pkgrel=25 +pkgrel=26 commit_hash=`cat ../git_src/git_hash` pkgdesc="A Homebrew PVR project $commit_hash" arch=('i686' 'x86_64') @@ -66,7 +66,9 @@ install='mythtv.install' #http://code.mythtv.org/trac/ticket/10773 mythexpress #http://code.mythtv.org/trac/ticket/10825 mythexpress #http://code.mythtv.org/trac/ticket/11032 mythexpress -patchs=('myth_settings.patch' 'MythBase.php.patch' +#patchs=('myth_settings.patch' 'MythBase.php.patch' + +patchs=('myth_settings.patch' 'bonjour-correction.patch' '0001-protect-metadata-loads-from-multiple-threads.patch' '0004-restore-fe-netcontrol-play-resume-functionality.patch') @@ -155,7 +157,6 @@ package() { md5sums=('7ef6de58240e7aad389a0b13d91b1cf6' '2babd4b8e146a7538d18dcd55695b0be' '322f48528b350f0e6aebfff6eab4c4ee' - '9ec33d6956464283636c1f9a781dd4fd' '8e2a055bb3beae04c88a8e603e080422' '67f7316c750fba17fa578d10840b9dbd' 'ae23e6a8cffbe335fa37bf59978bf7a2' diff --git a/abs/core/mythtv/stable-0.25/mythtv/menu-xml/library.xml.patch b/abs/core/mythtv/stable-0.25/mythtv/menu-xml/library.xml.patch index 8c36a62..8f80928 100644 --- a/abs/core/mythtv/stable-0.25/mythtv/menu-xml/library.xml.patch +++ b/abs/core/mythtv/stable-0.25/mythtv/menu-xml/library.xml.patch @@ -5,8 +5,8 @@ <button> + <type>STREAM</type> -+ <text>Play Online Streams</text> -+ <description></description> ++ <text>Online Content</text> ++ <description>Play content from online sources</description> + <action>MENU gen_is.xml</action> + </button> + diff --git a/abs/core/mythtv/stable-0.25/mythweb/PKGBUILD b/abs/core/mythtv/stable-0.25/mythweb/PKGBUILD index 5e1c853..728b6dc 100644 --- a/abs/core/mythtv/stable-0.25/mythweb/PKGBUILD +++ b/abs/core/mythtv/stable-0.25/mythweb/PKGBUILD @@ -1,6 +1,6 @@ pkgname=mythweb pkgver=0.25 -pkgrel=6 +pkgrel=7 commit_hash=`cat ../git_src/git_hash_web` @@ -13,7 +13,8 @@ depends=('mythtv>=0.25' 'lighttpd' 'php' 'local-website') groups=('mythtv-extras') install=mythweb.install #http://code.mythtv.org/trac/ticket/10504 -patches=(schedules.php.patch sorting.php.patch tv-schedules.php.patch) +#patches=(schedules.php.patch sorting.php.patch tv-schedules.php.patch) +patches=(schedules.php.patch tv-schedules.php.patch) source=(`echo ${patches[@]:0}` mythweb.include mythweb_gen_light.conf) DOCROOT=/data/srv/httpd/mythweb @@ -69,7 +70,6 @@ build() { } md5sums=('392e570594859c026ac12194920246d8' - '53cc59d6a8bf144027b25d5dcbfffc66' '515e29fda503c199888a91553e1815a0' '7645a6399434cbba35639713ac5d88e0' 'df190116b3aba35720fb6631885f973f') diff --git a/abs/core/system-templates/PKGBUILD b/abs/core/system-templates/PKGBUILD index 9708ebf..0c1dbeb 100755 --- a/abs/core/system-templates/PKGBUILD +++ b/abs/core/system-templates/PKGBUILD @@ -1,6 +1,6 @@ pkgname=system-templates pkgver=2.0 -pkgrel=23 +pkgrel=25 conflicts=( ) pkgdesc="Templates used for system configuration" depends=() diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/lircrc-snapstrm.txt index e918011..064e72d 100644..100755 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_all/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch1/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch2/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch3/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch4/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch5/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/lircrc-snapstrm.txt b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/lircrc-snapstrm.txt index e918011..064e72d 100644 --- a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/lircrc-snapstrm.txt +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/lircrc-snapstrm.txt @@ -5,586 +5,345 @@ # # Modified from Jarod Wilson's which came from Jeff Campbell's # By Brad Templeton +# Modified to use the Firefly's Unique Buttons by Ryan Schmitz +# Updated by RacerX for Linhes 8.0 - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive + # Remote Numbers 0-9 begin -prog = mythtv -button = TV -repeat = 3 -config = F5 + prog = mythtv + button = 0 + repeat = 3 + config = 0 end begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 + prog = mythtv + button = 1 + repeat = 3 + config = 1 end -# Not yet defined begin -prog = mythtv -button = Music -repeat = 3 -config = Up + prog = mythtv + button = 2 + repeat = 3 + config = 2 end -# Given another function for now, I don't use mythgallery begin -prog = mythtv -button = Pictures -repeat = 3 -config = F + prog = mythtv + button = 3 + repeat = 3 + config = 3 end begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 + prog = mythtv + button = 4 + repeat = 3 + config = 4 end -# I stuck the "todo" list on here as Myth has no radio function begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 + prog = mythtv + button = 5 + repeat = 3 + config = 5 end begin -prog = mythtv -button = UP -repeat = 3 -config = Up + prog = mythtv + button = 6 + repeat = 3 + config = 6 end begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down + prog = mythtv + button = 7 + repeat = 3 + config = 7 end begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left + prog = mythtv + button = 8 + repeat = 3 + config = 8 end begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right + prog = mythtv + button = 9 + repeat = 3 + config = 9 end -# Channel Up + # Escape/Back/Exit begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up + prog = mythtv + button = BACK + config = Esc end -# Channel Down + # OK/Select begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down + prog = mythtv + button = ENT + config = pace end -# OK/Select + # Volumn Up begin -prog = mythtv -button = Ok -config = Space + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 end -# Play + # Volumn Down begin -prog = mythtv -button = Play -config = Return + prog = mythtv + button = VOL- + repeat = 3 + config = F10 end -# Stop + # Mute begin -prog = mythtv -button = Stop -config = I + prog = mythtv + button = MUTE + repeat = 3 + config = | end -# Escape/Exit/Back + # Firefly begin -prog = mythtv -button = BACK -config = Esc + prog = mythtv + button = FIREFLY + repeat = 3 + config = F8 end -# Power Off/Exit + # Channel Up begin -prog = mythtv -button = POWER -config = Esc + prog = mythtv + button = CH+ + repeat = 3 + config = Up end - -# Pause + # Channel Down begin -prog = mythtv -button = Pause -repeat = 3 -config = P + prog = mythtv + button = CH- + repeat = 3 + config = Down end -# Mute + # Info begin -prog = mythtv -button = Mute -repeat = 3 -config = | + prog = mythtv + button = INFO + repeat = 3 + config = I end -# Fast forward (30 sec default) + # change tuners begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp + prog = mythtv + button = OPTION + repeat = 3 + config = Y end -# Rewind (10 sec default) + # Up begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown + prog = mythtv + button = UP + repeat = 3 + config = Up end -# Skip forward (10 min default) + # Left begin -prog = mythtv -button = Next -repeat = 3 -config = End + prog = mythtv + button = LEFT + repeat = 3 + config = Left end -# Skip backward (10 min default) + # Down begin -prog = mythtv -button = Previous -repeat = 3 -config = Home + prog = mythtv + button = DOWN + repeat = 3 + config = Down end -# Record + # Right begin -prog = mythtv -button = Record -repeat = 3 -config = R + prog = mythtv + button = RIGHT + repeat = 3 + config = Right end -# Delete + # Ok/Select begin -prog = mythtv -button = Red -repeat = 3 -config = D + prog = mythtv + button = OK + config = space end -# Decrease play speed + # Menu begin -prog = mythtv -button = Green -repeat = 3 -config = J + prog = mythtv + button = MENU + repeat = 3 + config = M end -# Display EPG while in live TV, -# View selected show while in EPG + # Escape/Exit/Back begin -prog = mythtv -button = Menu -repeat = 3 -config = M + prog = mythtv + button = EXIT + config = Esc end -# Scroll up + # Record begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 + prog = mythtv + button = REC + repeat = 3 + config = R end -# Scroll down + # Play begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 + prog = mythtv + button = PLAY + config = Return end -# Bring up OSD info + # Stop begin -prog = mythtv -button = Go -repeat = 3 -config = I + prog = mythtv + button = STOP + config = Esc end -# Change display aspect ratio + # Rewind begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W + prog = mythtv + button = FWD + repeat = 3 + config = PgDown end -# double speed watch + # Fast Forward begin -prog = mythtv -button = Yellow -repeat = 3 -config = J + prog = mythtv + button = REW + repeat = 3 + config = PgUp end -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch + # Skip Backward begin -prog = mythtv -button = Blue -repeat = 3 -config = Y + prog = mythtv + button = PREV + repeat = 3 + config = home end -# Numbers 0-9 - + # Skip Forward begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 + prog = mythtv + button = NEXT + repeat = 3 + config = End end + # Pause begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 + prog = mythtv + button = Pause + repeat = 3 + config = P end + # Delete begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 + prog = mythtv + button = A + repeat = 3 + config = D end + # Decrease Playback Speed begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 + prog = mythtv + button = B + repeat = 3 + config = J end + # Double Playback Speed begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 + prog = mythtv + button = C + repeat = 3 + config = J end + # Time Stretch begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 + prog = mythtv + button = D + repeat = 3 + config = Y end -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end + ### Jump Points need to match config in mythweb keybindings + # Myth Music begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 + prog = mythtv + button = Music + repeat = 3 + config = F4 end + # Live TV begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 + prog = mythtv + button = TV + repeat = 3 + config = F5 end + # Myth Video Gallery begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 + prog = mythtv + button = VIDEO + repeat = 3 + config = F2 end - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback + # Myth Image Gallery begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause + prog = mythtv + button = PHOTOS + repeat = 3 + config = F end -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end -# Quit begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit + prog = irexec + button = HELP + config = env DISPLAY=:0 xdotool key alt+h + flags = quit end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/xbmc.xml b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/xbmc.xml new file mode 100644 index 0000000..64dc7df --- /dev/null +++ b/abs/core/system-templates/templates/remotes/ATI/snapstream_firefly_ch6/xbmc.xml @@ -0,0 +1,38 @@ +<lircmap> +<remote device="Snapstream_Firefly"> + <pause>PAUSE</pause> + <stop>STOP</stop> + <forward>FWD</forward> + <reverse>REW</reverse> + <left>LEFT</left> + <right>RIGHT</right> + <up>UP</up> + <down>DOWN</down> + <select>OK</select> + <pageplus>CH+</pageplus> + <pageminus>CH-</pageminus> + <back>EXIT</back> + <menu>MENU</menu> + <title>PLAY</title> + <info>INFO</info> + <skipplus>NEXT</skipplus> + <skipminus>PREV</skipminus> + <display>MAXI</display> + <start>FIREFLY</start> + <record>REC</record> + <volumeplus>VOL+</volumeplus> + <volumeminus>VOL-</volumeminus> + <mute>MUTE</mute> + <power>CLOSE</power> + <one>1</one> + <two>2</two> + <three>3</three> + <four>4</four> + <five>5</five> + <six>6</six> + <seven>7</seven> + <eight>8</eight> + <nine>9</nine> + <zero>0</zero> +</remote> +</lircmap> diff --git a/abs/core/system-templates/templates/remotes/receiver_usb.id b/abs/core/system-templates/templates/remotes/receiver_usb.id index c47094e..f30428c 100644 --- a/abs/core/system-templates/templates/remotes/receiver_usb.id +++ b/abs/core/system-templates/templates/remotes/receiver_usb.id @@ -4,7 +4,7 @@ 0e9c:0000|streamzap|"Streamzap Remote"|favorites 0fe9:9010|dvico| "DVICO Remote:"|favorites 0fe9:db98|Dvico-Dual-Digital4-rev2| "Dvico Dual Digital4 rev2 0fe9/db98"|other -6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone "|other +6253:0100|Twinhan| "the VisionPlus is a Twinhan clone "|other 1509:9242|mce| "FIC eHome Infrared Transceiver 1509/9242"|favorites 1934:0602|mce| "Fintek eHome Infrared Transceiver 1934/0602"|favorites 147a:e015|mce| "Formosa eHome Infrared Transceiver 147a/e015"|favorites diff --git a/abs/core/xymon/PKGBUILD b/abs/core/xymon/PKGBUILD index 8441779..a197b03 100755 --- a/abs/core/xymon/PKGBUILD +++ b/abs/core/xymon/PKGBUILD @@ -1,7 +1,7 @@ pkgbase=xymon pkgname=(xymonserver xymonclient) pkgver=4.3.5 -pkgrel=44 +pkgrel=46 pkgdesc="Hobbit is a system for monitoring servers and networks. " license="GPL" arch=('i686' 'x86_64') @@ -74,7 +74,7 @@ package_xymonserver(){ install -D -m644 $startdir/src/logrotate-server.xymon $startdir/pkg/xymonserver/etc/logrotate.d/xymon-server # fix env for mythtb bindingds - echo "MYTHCONFDIR=/usr/share/mythtv" >> $startdir/pkg/xymonserver/home/xymon/etc/xymonserver.cfg + echo "MYTHCONFDIR=/usr/share/mythtv" >> $startdir/pkg/xymonserver/home/xymon/etc/xymonserver.cfg #copy in replacment icon set @@ -90,13 +90,16 @@ package_xymonserver(){ patch -p0 < $startdir/src/xymonserver.cfg.diff || return 1 patch -p3 < $startdir/src/client-local.cfg.patch || return 1 patch -p3 < $startdir/src/hosts.cfg.patch || return 1 - + #fix permissions chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/ chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/xymon/ chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/xymon/notes/ chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/xymon/gifs/ + chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/xymon/snap/ + chmod 775 $startdir/pkg/xymonserver/data/srv/httpd/htdocs/xymon/rep/ chmod 750 $startdir/pkg/xymonserver/etc/sudoers.d + } @@ -136,7 +139,7 @@ md5sums=('31923ec126fe1c264fceb459d2175161' '622f400fd098cbc43c203e3210a6694e' '84442377c6e914b65519076bda4e17a4' 'd7116dc59319b893e90a26e6beb83994' - '67621b6c5a766ac03c5f407bdbdca810' + '0a63d66de7e74daef24899da0a4042ab' '7ad4871af35f82c7824bb682b9325dba' '98e9242ae346f729b14cb195786571f2' '31ac5c1f6dcc9408b64c4107b325a9a6' diff --git a/abs/core/xymon/logrotate-client.xymon b/abs/core/xymon/logrotate-client.xymon index a312b64..0fadb2e 100644..100755 --- a/abs/core/xymon/logrotate-client.xymon +++ b/abs/core/xymon/logrotate-client.xymon @@ -1,14 +1,15 @@ /home/xymon/client/logs/* { - missingok - size 512K - rotate 0 - compress - postrotate - if [ -f /service/xymon-client/run ] - then - sv hup xymon-client - fi + missingok + notifempty + size 512k + rotate 2 + compress + postrotate + if [ -f /service/xymon-client/run ] + then + sv hup xymon-client + fi - endscript + endscript } diff --git a/abs/core/xymon/logrotate-server.xymon b/abs/core/xymon/logrotate-server.xymon index 2267da8..cdbf339 100644 --- a/abs/core/xymon/logrotate-server.xymon +++ b/abs/core/xymon/logrotate-server.xymon @@ -1,7 +1,8 @@ /var/log/hobbit/* { missingok - size 512K - rotate 0 + notifempty + size 512k + rotate 2 compress postrotate if [ -f /service/xymon-server/run ] diff --git a/abs/core/xymon/xymon.install b/abs/core/xymon/xymon.install index 3c9680b..90af45b 100644..100755 --- a/abs/core/xymon/xymon.install +++ b/abs/core/xymon/xymon.install @@ -17,9 +17,18 @@ post_install() { sed -i -e "s/localhost/$hostname/" /home/xymon/server/etc/hosts.cfg sed -i -e "s/\# bbd/\# bbd func/" /home/xymon/server/etc/hosts.cfg sed -i -e "s/localhost/$hostname/" /home/xymon/server/etc/xymonserver.cfg + #fix permissions chown -R nobody /home/xymon chown -R nobody /data/srv/httpd/htdocs/xymon + + + chown -R nobody:http /data/srv/httpd/htdocs/xymon/snap + chown -R nobody:http /data/srv/httpd/htdocs/xymon/rep + chmod -R 775 /data/srv/httpd/htdocs/xymon/rep + chmod -R 775 /data/srv/httpd/htdocs/xymon/snap + chown -R nobody /var/log/hobbit + chown root /home/xymon/server/bin/xymonping chmod +s /home/xymon/server/bin/xymonping diff --git a/abs/extra/xbmc/PKGBUILD b/abs/extra/xbmc/PKGBUILD index ecd7fb9..874e0d5 100644 --- a/abs/extra/xbmc/PKGBUILD +++ b/abs/extra/xbmc/PKGBUILD @@ -9,7 +9,7 @@ _prefix=/usr pkgname=xbmc pkgver=11.0 -pkgrel=9 +pkgrel=10 pkgdesc="A software media player and entertainment hub for digital media" arch=('i686' 'x86_64') url="http://xbmc.org" @@ -109,4 +109,4 @@ package() { md5sums=('9e8a26ee25173c7268abea7f1d82d428' '5aa2e21a1f9fea60a2e5bb345e5aefd0' 'e48a3d87984669ef206e902bc8290ff9' - '6c4ab6c8a5ef748786c7602bb2a9ef99') + '8c5cd1b5e7660a49ccd2f99967180a82') diff --git a/abs/extra/xbmc/xbmc_lib.conf b/abs/extra/xbmc/xbmc_lib.conf index df88abb..2dbb10f 100644 --- a/abs/extra/xbmc/xbmc_lib.conf +++ b/abs/extra/xbmc/xbmc_lib.conf @@ -2,7 +2,7 @@ <button> <type>MENU_XBMC</type> <text>Launch XBMC</text> - <action>EXEC /usr/bin/xbmc</action> + <action>EXEC /usr/LH/bin/xbmc.sh</action> </button> <!--#XBMC--> |
