summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--abs/core/lirc_085/PKGBUILD86
-rw-r--r--abs/core/lirc_085/dvicoIR.rules15
-rwxr-xr-xabs/core/lirc_085/hw_commandir.c1926
-rwxr-xr-xabs/core/lirc_085/hw_commandir.h175
-rw-r--r--abs/core/lirc_085/kernel-2.6.26.patch122
-rw-r--r--abs/core/lirc_085/kernel-2.6.27.patch78
-rw-r--r--abs/core/lirc_085/lirc.fdi11
-rw-r--r--abs/core/lirc_085/lirc.install50
-rw-r--r--abs/core/lirc_085/lirc_atiusb.patch27
-rw-r--r--abs/core/lirc_085/lirc_mod_mce.patch187
10 files changed, 0 insertions, 2677 deletions
diff --git a/abs/core/lirc_085/PKGBUILD b/abs/core/lirc_085/PKGBUILD
deleted file mode 100644
index 12dc3b4..0000000
--- a/abs/core/lirc_085/PKGBUILD
+++ /dev/null
@@ -1,86 +0,0 @@
-# $Id: PKGBUILD 14978 2008-10-11 21:04:37Z tpowa $
-# Maintainer: Paul Mattal <paul@archlinux.org>
-
-pkgname=lirc
-pkgver=0.8.5CVS
-pkgrel=17
-_kernver=2.6.28-LinHES
-pkgdesc="Linux Infrared Remote Control kernel modules for stock arch kernel"
-arch=(i686 x86_64)
-url="http://www.lirc.org/"
-license=('GPL')
-depends=('lirc-utils=0.8.5CVS' 'kernel26>=2.6.27' 'kernel26<2.6.29' 'iguanaIR')
-makedepends=('python')
-replaces=('lirc+pctv')
-options=('!makeflags')
-install=$pkgname.install
-source=(http://www.blushingpenguin.com/mark/lmilk/lirc-0.8.5-CVS-pvr150.tar.bz2 \
- kernel-2.6.26.patch
- kernel-2.6.27.patch
- lirc_atiusb.patch
- http://superb-east.dl.sourceforge.net/sourceforge/mod-mce/lirc_mod_mce-0.1.5.tar.bz2
- lirc_mod_mce.patch
- hw_commandir.c
- hw_commandir.h
- dvicoIR.rules
- lirc.fdi)
-
-build() {
- # configure
- cd $startdir/src/lirc-0.8.5-CVS-pvr150 || return 1
- cp $startdir/src/hw_commandir.* $startdir/src/lirc-0.8.5-CVS-pvr150/daemons
-# patch -Np1 -i ../kernel-2.6.26.patch || return 1
-# patch -Np1 -i ../kernel-2.6.27.patch || return 1
- patch -Np1 -i ../lirc_atiusb.patch || return 1
-
- ./configure --enable-sandboxed --prefix=/usr \
- --with-driver=all --with-kerneldir=/usr/src/linux-${_kernver}/ \
- --with-moduledir=/lib/modules/${_kernver}/kernel/drivers/misc \
- --with-transmitter \
- || return 1
-
- # disable parallel and bt829
- # because of incompatibility with smp systems
- sed -i -e "s:lirc_parallel::" -e "s:lirc_bt829::" \
- Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
- || return 1
- # disable lirc_gpio due to brokeness of kernel 2.6.23
- sed -i -e "s:lirc_gpio::" \
- Makefile drivers/Makefile drivers/*/Makefile tools/Makefile \
- || return 1
-
- # build
- cd drivers || return 1
- make || return 1
- make DESTDIR=$startdir/pkg install || return 1
-
- # set the kernel we've built for inside the install script
- sed -i -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
- $startdir/lirc.install || return 1
- cd $startdir/src/lirc_mod_mce
- cp ../lirc-0.8.5-CVS-pvr150/drivers/lirc_dev/lirc_dev.h .
- patch -p1 < ../lirc_mod_mce.patch
- make KDIR=/usr/src/linux-2.6.28-LinHES/
- cp lirc_mod_mce.ko $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/
- mv $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/lirc_mceusb2.ko $startdir/pkg/lib/modules/2.6.28-LinHES/kernel/drivers/misc/lirc_mceusb2.ko.not
- #remove old commandir
- rm $startdir/pkg/lib/modules/$_kernver/kernel/drivers/misc/lirc_cmdir.ko
- rm $startdir/pkg/lib/modules/$_kernver/kernel/drivers/misc/commandir.ko
-
- # Add a udev rule for the DVICO remote so that if there is more than
- # one hiddev device, the system cant get confused.
- install -D -m644 $srcdir/dvicoIR.rules $pkgdir/etc/udev/rules.d/dvicoIR.rules
-
- # Add the fdi file to prevent the Dvico dual 4 remotes from screwing up keyboard interaction.
- install -D -m644 $srcdir/lirc.fdi $pkgdir/usr/share/hal/fdi/preprobe/20thirdparty/lirc.fdi
-}
-md5sums=('b96dae91b566143b3af433fa2714ec9a'
- '1753acd774f50b638e6173d364de53fd'
- '6f151eb4e81fc7776a06c9063e6ad9a5'
- '7eccd7826ab99e5cf1b9154171c8b927'
- '21ce358809105f005e888e3b138c59e6'
- 'b5d52566a9dae8d76e24e8753f33abef'
- 'f059f4030afc682c9539a03bf837c1cf'
- '4e698654cc44fc6c4163814acda5a7ee'
- '9a3a6dc03647ee6674a166dfb884ddd6'
- '203d9cd014c4276be4c84cecd103919d')
diff --git a/abs/core/lirc_085/dvicoIR.rules b/abs/core/lirc_085/dvicoIR.rules
deleted file mode 100644
index ada5466..0000000
--- a/abs/core/lirc_085/dvicoIR.rules
+++ /dev/null
@@ -1,15 +0,0 @@
-# This rule is for the Dvico Dual Digital 4 Rev 2. It has 2 IR modules
-# identified, only the first of which is connected to the receiver.
-# The KERNELS=="*-1" part of this rule makes sure that the first
-# device is the one that gets the symlink.
-KERNEL=="event*", \
- KERNELS=="*-1", \
- ATTRS{manufacturer}=="Dvico", \
- ATTRS{idVendor}=="0fe9", \
- ATTRS{idProduct}=="db98", \
- SYMLINK="input/irremote"
-
-# This rule is for the older style USB DVICO remote dongles.
-SUBSYSTEMS=="usb", KERNEL=="hiddev*", \
- ATTRS{product}=="DVICO USB HID Remocon V1.00", \
- SYMLINK+="usb/dvicoIR"
diff --git a/abs/core/lirc_085/hw_commandir.c b/abs/core/lirc_085/hw_commandir.c
deleted file mode 100755
index 40ac0de..0000000
--- a/abs/core/lirc_085/hw_commandir.c
+++ /dev/null
@@ -1,1926 +0,0 @@
-/* CommandIR transceivers driver 0.96
- * Supporting CommandIR II and CommandIR Mini (and multiple of both)
- * April-June 2008, Matthew Bodkin
- * December 2008, bug fixes, Matthew Bodkin
- */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <limits.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-#include <sys/wait.h>
-#include <sys/un.h>
-#include <sys/utsname.h>
-
-#include "hardware.h"
-#include "ir_remote.h"
-#include "lircd.h"
-#include "receive.h"
-#include "transmit.h"
-#include "hw_commandir.h"
-#include <usb.h>
-
-#define RAPID_DECODE 1
-
-extern struct ir_remote *repeat_remote;
-extern char *progname;
-
-
-/**********************************************************************
- *
- * internal function prototypes
- *
- **********************************************************************/
-static int commandir_init();
-static int commandir_deinit(void);
-static char *commandir_rec(struct ir_remote *remotes);
-static void commandir_read_loop();
-static int cmdir_convert_RX(unsigned char *orig_rxbuffer);
-static unsigned int get_time_value(unsigned int firstint,
- unsigned int secondint, unsigned char overflow);
-static lirc_t commandir_readdata(lirc_t timeout);
-static int commandir_send(struct ir_remote *remote,struct ir_ncode *code);
-static int commandir_ioctl(unsigned int cmd, void *arg);
-//static void setEmitterMask(unsigned char highbyte, unsigned char lowbyte);
-static void setEmitterMask(int bitmask);
-static void commandir_transmit(char *buffer, int bytes, int bitmask,
- unsigned int);
-static void commandir_child_init();
-static void shutdown_usb();
-static void hardware_scan();
-static void hardware_disconnect(int);
-static void hardware_setorder();
-static void raise_event(unsigned int);
-static int commandir_read();
-static int check_irsend_commandir(unsigned char *command);
-static int commandir_decode(char *command);
-static int commandir_receive_decode(struct ir_remote *remote,
- ir_code *prep,ir_code *codep,ir_code *postp,
- int *repeat_flagp,
- lirc_t *min_remaining_gapp, lirc_t *max_remaining_gapp);
-static void pipeline_check();
-static int inline get_bit(int bitnum);
-static void add_to_tx_pipeline(unsigned char *buffer, int bytes,
- int channel_mask, unsigned int);
-static void recalc_tx_available(int);
-static void set_hash_mask(int channel_mask);
-static int commandir2_convert_RX(unsigned short *bufferrx,
- unsigned char numvalues);
-static void cleanup_commandir_dev(int spotnum);
-
-/**********************************************************************
- *
- * CommandIR Vars
- *
- **********************************************************************/
-static int current_transmitter_mask = 0xff;
-static char unsigned commandir_data_buffer[512];
-static int last_mc_time = -1;
-static int commandir_rx_num = 0;
-
-
-static char channels_en[MAX_DEVICES];
-static char open_bus_hash[USB_MAX_BUSES][USB_MAX_BUSDEV];
-static int tx_order[MAX_DEVICES];
-static char device_count = 0;
-static int mini_freq[MAX_DEVICES];
-static int child_pipe_write = 0;
-static char haveInited = 0;
-// Fake 'commandir' remote signal values
-static unsigned int signal_base[2][2] = { {100|PULSE_BIT, 200},
- {1000|PULSE_BIT, 200} };
-
-// Pipes to and from the child/parent
-static pid_t child_pid = -1;
-static int pipe_fd[2] = { -1, -1 };
-static int pipe_tochild[2] = { -1, -1 };
-static int tochild_read = -1, tochild_write = -1;
-
-struct commandir_device
-{
- usb_dev_handle *cmdir_udev;
- int bus;
- int busdev;
- int interface;
- int location;
- int hw_type;
- int hw_revision;
- int hw_subversion;
- unsigned char devnum;
- int endpoint_max[3];
-} open_commandir_devices[4];
-
-struct hardware hw_commandir =
-{
- NULL, /* default device */
- -1, /* fd */
- LIRC_CAN_SET_SEND_CARRIER|
- LIRC_CAN_SEND_PULSE|
- LIRC_CAN_SET_TRANSMITTER_MASK|
- LIRC_CAN_REC_MODE2,
- LIRC_MODE_PULSE, /* send_mode */
- LIRC_MODE_MODE2, /* rec_mode */
- sizeof(lirc_t), /* code_length in BITS */
- commandir_init, /* init_func */
- NULL, /* config_func */
- commandir_deinit, /* deinit_func */
- commandir_send, /* send_func */
- commandir_rec, /* rec_func */
- commandir_receive_decode, /* decode_func */
- commandir_ioctl, /* ioctl_func */
- commandir_readdata, /* readdata */
- "commandir"
-};
-
-/*** LIRC Interface Functions - Non-blocking parent thread
-*/
-
-static int commandir_receive_decode(struct ir_remote *remote,
- ir_code *prep,ir_code *codep,ir_code *postp,
- int *repeat_flagp,
- lirc_t *min_remaining_gapp, lirc_t *max_remaining_gapp) {
-
- int i;
- i = receive_decode(remote,
- prep,codep,postp,
- repeat_flagp,
- min_remaining_gapp, max_remaining_gapp);
-
- if(i > 0){
- static char rx_char[3] = {3, 0, RXDECODE_HEADER_LIRC};
- write(tochild_write, rx_char, 3);
- }
-
- return i;
-}
-
-
-static int commandir_init()
-{
- long fd_flags;
- if(haveInited){
- static char init_char[3] = {3, 0, INIT_HEADER_LIRC};
- write(tochild_write, init_char, 3);
- return 1;
- }
-
- init_rec_buffer(); // LIRC's rec
- init_send_buffer(); // LIRC's send
-
- /* A separate process will be forked to read data from the USB
- * receiver and write it to a pipe. hw.fd is set to the readable
- * end of this pipe. */
- if (pipe(pipe_fd) != 0)
- {
- logprintf(LOG_ERR, "couldn't open pipe 1");
- return 0;
- }
-
- hw.fd = pipe_fd[0]; // the READ end of the Pipe
-
- if (pipe(pipe_tochild) != 0)
- {
- logprintf(LOG_ERR, "couldn't open pipe 1");
- return 0;
- }
-
- tochild_read = pipe_tochild[0]; // the READ end of the Pipe
- tochild_write = pipe_tochild[1]; // the WRITE end of the Pipe
-
- fd_flags = fcntl(pipe_tochild[0], F_GETFL);
- if(fcntl(pipe_tochild[0], F_SETFL, fd_flags | O_NONBLOCK) == -1)
- {
- logprintf(LOG_ERR, "can't set pipe to non-blocking");
- return 0;
- }
-
- child_pid= fork();
- if (child_pid== -1)
- {
- logprintf(LOG_ERR, "couldn't fork child process");
- return 0;
- }
- else if (child_pid== 0)
- {
- child_pipe_write = pipe_fd[1];
- commandir_child_init();
- commandir_read_loop();
- return 0;
- }
- haveInited = 1;
-
- logprintf(LOG_ERR, "CommandIR driver initialized");
- return 1;
-}
-
-
-static int commandir_deinit(void)
-{
- /* Trying something a bit new with this driver. Keeping the driver
- * connected so in the future we can still monitor in the client */
- if(USB_KEEP_WARM && (!strncmp(progname, "lircd", 5)))
- {
- static char deinit_char[3] = {3, 0, DEINIT_HEADER_LIRC};
- write(tochild_write, deinit_char, 3);
- logprintf(LOG_ERR, "LIRC_deinit but keeping warm");
- }
- else
- {
- if (tochild_read >= 0)
- {
- if (close(tochild_read) < 0)
- {
- logprintf(LOG_ERR, "Error closing pipe2");;
- }
- tochild_read = tochild_write = -1;
- }
-
- if(haveInited){
- // shutdown all USB
- if(child_pid > 0)
- {
- logprintf(LOG_ERR, "Closing child process");
- kill(child_pid, SIGTERM);
- waitpid(child_pid, NULL, 0);
- child_pid = -1;
- haveInited = 0;
- }
- }
-
- if (hw.fd >= 0)
- {
- if (close(hw.fd) < 0) logprintf(LOG_ERR, "Error closing pipe");
- hw.fd = -1;
- }
-
- logprintf(LOG_ERR, "commandir_deinit()");
- }
- return(1);
-}
-
-static int commandir_send(struct ir_remote *remote,struct ir_ncode *code)
-{
- int length;
- lirc_t *signals;
-
- if(!init_send(remote,code)) {
- return 0;
- }
-
- length = send_buffer.wptr;
- signals = send_buffer.data;
-
- if (length <= 0 || signals == NULL) {
- return 0;
- }
-
- int cmdir_cnt =0;
- char cmdir_char[70];
-
- // Set the frequency of the signal along with the signal + transmitters
- cmdir_char[0] = 7;
- cmdir_char[1] = 0;
-
- cmdir_char[2] = FREQ_HEADER_LIRC;
- cmdir_char[3] = (remote->freq >> 24) & (0xff);
- cmdir_char[4] = (remote->freq >> 16) & (0xff);
- cmdir_char[5] = (remote->freq >> 8) & (0xff);
- cmdir_char[6] = (remote->freq & 0xff);
-
- write(tochild_write, cmdir_char, cmdir_char[0]);
-
- cmdir_cnt = 3;
-
- unsigned char * send_signals = malloc(sizeof(signals) * length + 4);
-
- send_signals[0] = (sizeof(lirc_t) * length + 4) & 0xff;
- send_signals[1] = ((sizeof(lirc_t) * length + 4) >> 8) & 0xff;
-
- send_signals[2] = TX_LIRC_T;
- send_signals[3] = (char)current_transmitter_mask;
-
- memcpy(&send_signals[4], signals, sizeof(lirc_t) * length);
-
- if(write(tochild_write, send_signals,
- send_signals[0] + send_signals[1] * 256) < 0)
- {
- logprintf(LOG_ERR, "Error writing to child_write");
- }
-
- free(send_signals);
- return(length);
-}
-
-static char *commandir_rec(struct ir_remote *remotes)
-{
- char * returnit;
- if (!clear_rec_buffer()) return NULL;
- returnit = decode_all(remotes);
- return returnit;
-}
-
-static int commandir_ioctl(unsigned int cmd, void *arg)
-{
- unsigned int ivalue;
- char cmdir_char[5];
-
- switch(cmd)
- {
- case LIRC_SET_TRANSMITTER_MASK:
-
- ivalue=*(unsigned int*)arg;
-
- if(ivalue >= MAX_MASK) return (MAX_CHANNELS);
-
- /* Support the old way of setting the frequency of the signal along
- * with the signal + transmitters */
- cmdir_char[0] = 5;
- cmdir_char[1] = 0;
- cmdir_char[2] = CHANNEL_EN_MASK;
- cmdir_char[3] = (unsigned char)(ivalue & 0x00FF); // Low bits
- cmdir_char[4] = (unsigned char)(ivalue >> 8); // High bits
-
- write(tochild_write, cmdir_char, cmdir_char[0]);
-
- return (0);
-
- default:
- logprintf(LOG_ERR, "Unknown ioctl - %d", cmd);
- return(-1);
- }
-
- return 1;
-}
-
-static lirc_t commandir_readdata(lirc_t timeout)
-{
- lirc_t code = 0;
- struct timeval tv = {0, timeout};
- fd_set fds;
-
- FD_ZERO(&fds);
- FD_SET(hw.fd, &fds);
-
- /* attempt a read with a timeout using select */
- if (select(hw.fd + 1, &fds, NULL, &fds, &tv) > 0)
- /* if we failed to get data return 0 */
- if (read(hw.fd, &code, sizeof(lirc_t)) <= 0)
- commandir_deinit();
- return code;
-}
-
-/*** End of parent fork / LIRC accessible functions */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-/*** CommandIR Client Process Functions (Handle all USB operations)
- */
-
-int channels_space_available[MAX_CHANNELS];
-int channels_space_updated = 0; // last updated time
-
-char * signalq[MAX_SIGNALQ]; // how many signals can be queued
-int signalq_len[MAX_SIGNALQ];
-int signalq_bitmask[MAX_SIGNALQ];
-unsigned int signalq_frequency[MAX_SIGNALQ];
-
-int top_signalq = -1;
-int next_signalq_per_channel[MAX_CHANNELS];
-
-unsigned char commandir_tx_start[MAX_CHANNELS*4];
-unsigned char commandir_tx_end[MAX_CHANNELS*4];
-unsigned char commandir_tx_available[MAX_CHANNELS];
-unsigned char lastSendSignalID[MAX_CHANNELS];
-unsigned char commandir_last_signal_id[MAX_CHANNELS];
-
-
-// Global variables to convert channel masks to consistant easier formats
-unsigned char hash_mask[MAX_CHANNELS];
-unsigned char selected_channels[MAX_CHANNELS];
-unsigned char total_selected_channels = 0;
-int shutdown_pending = 0;
-int read_delay = WAIT_BETWEEN_READS_US;
-int insert_fast_zeros = 0;
-
-int rx_hold = 0;
-
-// This is the only one for pre-pipelinging
-int pre_pipeline_emitter_mask = 0x000f; // default tx on only first CommandIR
-
-
-static void pipeline_check()
-{
- /* Transmit from the pipeline if it's time and there's space
- * what's available should now be updated in the main_loop
- */
-
- int i,j,k;
-
- i=0;
- if(top_signalq < 0) return;
-
- while(i <= top_signalq)
- {
-
- // Are ALL the channels this signal should TX on currently available?
- int oktosend = 1;
- set_hash_mask( signalq_bitmask[ i ] );
- for(j = 0; j<total_selected_channels; j++)
- {
- if(commandir_tx_available[ selected_channels[j] ] <
- (36 + (signalq_len[ i ])/sizeof(lirc_t)))
- {
- oktosend = 0;
- break;
- }
- }
-
- if(oktosend)
- {
- // great, TX this on all the channels.
-
- commandir_transmit(signalq[ i ], signalq_len[ i ], signalq_bitmask[ i ], signalq_frequency[ i ]);
-
- for(j = 0; j<total_selected_channels; j++)
- {
- /* commandir_tx_available[ selected_channels[j] ] -=
- (64 + (signalq_len[ i ])/sizeof(lirc_t)); */
- commandir_tx_available[ selected_channels[j] ] = 0;
- }
-
- /* Free up the memory, and see if there are new next_signalq's
- * (any more for this channel to TX)
- */
- free(signalq[i]);
-
- for(k=i; k<top_signalq; k++)
- {
- signalq[k] = signalq[k+1];
- signalq_len[k] = signalq_len[k+1];
- signalq_bitmask[k] = signalq_bitmask[k+1];
- signalq_frequency[k] = signalq_frequency[k+1];
- }
- top_signalq--;
- }
- else
- {
- i++;
- }
- }
-}
-
-static int get_bit(int bitnum)
-{
- int r = 1;
- return r << bitnum; // bit 0 is 1, bit 1 is 10, bit 2 is 100...
-}
-
-static void add_to_tx_pipeline(unsigned char *buffer, int bytes,
- int channel_mask, unsigned int frequency)
-{
- /* *buffer points to a buffer that will be OVERWRITTEN; malloc our copy.
- * buffer is a LIRC_T packet for CommandIR
- */
- top_signalq++;
- if(top_signalq > MAX_SIGNALQ)
- {
- logprintf(LOG_ERR, "Too many signals in queue: > %d", MAX_SIGNALQ);
- return;
- }
-
- signalq[top_signalq] = malloc(bytes);
-
- signalq_len[top_signalq] = bytes;
- signalq_bitmask[top_signalq] = channel_mask;
- signalq_frequency[top_signalq] = frequency;
-
- lirc_t *oldsignal, *newsignal;
- int x, pulse_now = 1;
- int projected_signal_length;
- short aPCAFOM = 0;
- float afPCAFOM = 0.0;
- int difference = 0;
-
- afPCAFOM = (6000000.0 / ((frequency > 0) ? frequency : DEFAULT_FREQ) ) ;
- aPCAFOM = afPCAFOM;
-
- // Trim off mid-modulation pulse fragments, add to space for exact signals
- for(x=0; x<(bytes/sizeof(lirc_t)); x++)
- {
- oldsignal = (lirc_t *)&buffer[x*sizeof(lirc_t)];
- newsignal = (lirc_t *)signalq[top_signalq];
- newsignal += x;
-
- if(pulse_now==1){
- projected_signal_length =
- (((int)( (*oldsignal * 12)/( afPCAFOM ) )) * aPCAFOM) / 12;
- difference = *oldsignal - projected_signal_length;
- // take off difference plus 1 full FOM cycle
- *newsignal = *oldsignal - difference - (aPCAFOM / 12);
-
- }
- else
- {
- if(difference != 0)
- {
- // Add anything subtracted from the pulse to the space
- *newsignal = *oldsignal + difference + (aPCAFOM / 12);
- difference = 0;
- }
-
- }
-
- pulse_now++;
- if(pulse_now > 1) pulse_now = 0;
- }
-
- return;
-}
-
-static void recalc_tx_available(int which_commandir)
-{
- int i;
- int length = 0;
- static int failsafe = 0;
-
- if(lastSendSignalID[which_commandir] !=
- commandir_last_signal_id[which_commandir])
- {
- /* INNOVATIONONE_FLAG:REMOVE This will be removed pending testing
- * for a future release
- */
- if(failsafe++ < 1000)
- {
- return;
- }
- logprintf(LOG_ERR, "Error: required the failsafe");
- }
-
- failsafe = 0;
- for(i=which_commandir*4; i<((which_commandir+1)*4); i++)
- {
- length = commandir_tx_end[i] - commandir_tx_start[i];
- if(length < 0) length += 0xff;
-
- if(commandir_tx_available[i] < 0xff - length)
- commandir_tx_available[i] = 0xff - length;
-
- }
-}
-
-static void set_hash_mask(int channel_mask) // eg, 8
-{
- // bitwise set of hash_mask for easier coding...
- int i,j;
- j=channel_mask;
- total_selected_channels = 0;
- for(i=0; i<MAX_CHANNELS; i++)
- {
- hash_mask[i] = j & 0x01;
- j = j >> 1;
- if(hash_mask[i])
- selected_channels[total_selected_channels++] = i;
- }
-}
-
-
-static void commandir_transmit(char *buffer, int bytes, int bitmask,
- unsigned int frequency)
-{
- /*** Send a TX command to 1 or more CommandIRs.
- * Keep in mind: TX frequency, TX channels, TX signal length,
- * which CommandIR, & what hardware version
- */
-
- int send_status;
- unsigned char packet[TX_BUFFER_SIZE];
- /* So we know where there should be gaps between signals and more
- * importantly, where there shouldn't be
- */
- static char signalid = 1;
-
- /* Depending on the tx channels, then depending on what hardware it is,
- * set the freq if needed, and send the buffer with the channel header
- * that's right for that CommandIR
- */
-
- int devicenum = 0;
- int sent = 0, tosend = 0;
- unsigned char mini_tx_mask = 0;
- lirc_t * signals; // have bytes/sizeof(lirc_t) signals
- signals = (lirc_t *)buffer;
- int total_signals = 0;
- int i;
- char cmdir_char[66];
- int which_signal = 0;
-
- total_signals = bytes / sizeof(lirc_t);
-
- setEmitterMask(bitmask);
-
- for(devicenum = 0; devicenum < device_count; devicenum++)
- {
- // Do we transmit on any channels on this device?
- if(channels_en[ devicenum ])
- {
- which_signal = 0;
- switch(open_commandir_devices[ tx_order[devicenum] ].hw_type)
- {
- case HW_COMMANDIR_2:
-
- mini_tx_mask = 0;
- // Short enough loop to unroll
- if(channels_en[ devicenum ] & 1) mini_tx_mask |= 0x10;
- if(channels_en[ devicenum ] & 2) mini_tx_mask |= 0x20;
- if(channels_en[ devicenum ] & 4) mini_tx_mask |= 0x40;
- if(channels_en[ devicenum ] & 8) mini_tx_mask |= 0x80;
-
- packet[1] = TX_COMMANDIR_II;
- packet[2] = mini_tx_mask;
-
- short PCAFOM = 0;
- float fPCAFOM = 0.0;
-
- if(bytes/sizeof(lirc_t) > 255)
- {
- logprintf(LOG_ERR, "Error: signal over max size");
- continue;
- }
-
- fPCAFOM = (6000000 / ((frequency > 0) ? frequency :
- DEFAULT_FREQ) ) ;
- PCAFOM = fPCAFOM;
-
- lastSendSignalID[ tx_order[devicenum] ] = packet[5] = (getpid() + signalid++) + 1;
-
- packet[4] = PCAFOM & 0xff;
- packet[3] = (PCAFOM >> 8) & 0xff;
-
- short packlets_to_send = 0, sending_this_time = 0;
-
- packlets_to_send = bytes / sizeof(lirc_t);
-
- int attempts;
- for(attempts = 0; attempts < 10; attempts++)
- {
-
- if((packlets_to_send*3 + 7) > open_commandir_devices[ tx_order[devicenum] ].endpoint_max[1])
- {
- sending_this_time = open_commandir_devices[ tx_order[devicenum] ].endpoint_max[1]/3 - 3;
- }
- else
- {
- sending_this_time = packlets_to_send;
- }
- int sending;
-
- for(i=0; i<sending_this_time; i++)
- {
- sending = signals[which_signal++];
-
- packet[i*3+7] = sending >> 8; // high1
- packet[i*3+8] = sending & 0xff; // low
- packet[i*3+9] = sending >> 16 & 0xff; // high2
- }
-
- packet[0] = (sending_this_time * 3 + 7);
- packet[6] = (sending_this_time == packlets_to_send) ? 0xcb : 0x00;
-
- send_status=usb_bulk_write(
- open_commandir_devices[ tx_order[devicenum] ].cmdir_udev,
- 2, // endpoint2
- (char*)packet,
- packet[0],
- USB_TIMEOUT_MS);
- if(send_status < 0)
- {
- // Error transmitting.
- hardware_scan();
- return;
- }
-
- packlets_to_send -= ((send_status - 7) / 3);
- if(!packlets_to_send)
- {
- // "No more packlets to send\n"
- break;
- }
- }
- continue; // for transmitting on next CommandIR device
-
-
- case HW_COMMANDIR_MINI:
- mini_tx_mask = 0;
- if(channels_en[ devicenum ] & 1) mini_tx_mask |= 0x80;
- if(channels_en[ devicenum ] & 2) mini_tx_mask |= 0x40;
- if(channels_en[ devicenum ] & 4) mini_tx_mask |= 0x20;
- if(channels_en[ devicenum ] & 8) mini_tx_mask |= 0x10;
-
- char freqPulseWidth = DEFAULT_PULSE_WIDTH;
-
- freqPulseWidth = (unsigned char)((1000000 /
- ((frequency > 0) ? frequency: DEFAULT_FREQ) ) / 2);
-
- if(freqPulseWidth == 0)
- {
- freqPulseWidth = DEFAULT_PULSE_WIDTH;
- }
-
- if(mini_freq[ tx_order[devicenum] ] != freqPulseWidth)
- {
- // Update the CommandIR Mini's next tx frequency
- cmdir_char[0] = FREQ_HEADER;
- cmdir_char[1] = freqPulseWidth;
- cmdir_char[2] = 0;
- mini_freq[ tx_order[devicenum] ] = freqPulseWidth;
- send_status=usb_bulk_write(
- open_commandir_devices[ tx_order[devicenum] ].cmdir_udev,
- 2, // endpoint2
- cmdir_char,
- 2, // 2 bytes
- USB_TIMEOUT_MS);
- if(send_status < 2)
- {
- // Error transmitting.
- hardware_scan();
- return ;
- }
- }
-
- unsigned int mod_signal_length=0;
-
- cmdir_char[0] = TX_HEADER_NEW;
- cmdir_char[1] = mini_tx_mask;
-
- unsigned int hibyte, lobyte;
-
- sent = 0;
- which_signal = 0;
- while(sent < (bytes / sizeof(lirc_t) * 2 ) )
- {
- tosend = (bytes / sizeof(lirc_t) * 2 ) - sent;
-
- if(tosend > (MAX_HW_MINI_PACKET - 2))
- {
- tosend = MAX_HW_MINI_PACKET - 2;
- }
-
- for(i=0;i<(tosend/2);i++) // 2 bytes per CommandIR pkt
- {
- mod_signal_length = signals[which_signal++] >> 3;
- hibyte = mod_signal_length/256;
- lobyte = mod_signal_length%256;
- cmdir_char[i*2+3] = lobyte;
- cmdir_char[i*2+2] = hibyte;
- }
-
- send_status=usb_bulk_write(
- open_commandir_devices[ tx_order[devicenum] ].cmdir_udev,
- 2, // endpoint2
- cmdir_char,
- tosend + 2,
- USB_TIMEOUT_MS);
- if(send_status < 1)
- {
- // Error transmitting.
- hardware_scan();
- return;
- }
- sent += tosend;
- } // while unsent data
- continue; // for transmitting on next CommandIR device
- default:
- logprintf(LOG_ERR, "Unknown hardware: %d",
- open_commandir_devices[tx_order[devicenum]].hw_type);
- } // hardware switch()
- } // if we should tx on this device
- } // for each device we have
-}
-
-
-static void commandir_child_init()
-{
- alarm(0);
- signal(SIGTERM, shutdown_usb);
- signal(SIGPIPE, SIG_DFL);
- signal(SIGINT, shutdown_usb);
- signal(SIGHUP, SIG_IGN);
- signal(SIGALRM, SIG_IGN);
-
- logprintf(LOG_ERR, "Child Initializing CommandIR Hardware");
-
- usb_init();
- int i;
- for(i=0;i<MAX_CHANNELS;i++)
- {
- next_signalq_per_channel[i] = -1;
- channels_en[i] = 0xff;
- }
-/*
- // Check kernel version: support fast decoding
- char checkV[] = {0,0,0,0,0,0,0,0,0,0};
- FILE * checkfile;
- int kernel_major = 0, kernel_minor = 0;
-
- checkfile=fopen("/proc/sys/kernel/osrelease", "r");
- if(checkfile!=NULL)
- {
- fgets(checkV, 7, checkfile);
- printf("Checking: %s.\n", checkV);
- printf("Version checking %s.\n", &checkV[4]);
- kernel_major = atoi(&checkV[2]);
- kernel_minor = atoi(&checkV[4]);
- printf("Major is: %d, minor is %d.\n", kernel_major, kernel_minor);
- fclose(checkfile);
- }
-
- if(kernel_major < 6){
- insert_fast_zeros = 0;
- logprintf(LOG_ERR, "Fast decoding disabled");
- }
- else
- {
- if(kernel_minor <= 24)
- {
- logprintf(LOG_ERR, "Fast decoding enabled (1)");
- insert_fast_zeros = 1;
- }
- else
- {
- logprintf(LOG_ERR, "Fast decoding enabled");
- insert_fast_zeros = 2;
- }
- }*/
- hardware_scan();
-}
-
-static void hardware_disconnect(int commandir_spot)
-{
- /* We had a read/write error, try disconnecting it and force _scan to
- * reconnect - otherwise we may get perpetual read/write errors
- */
-
- int x;
-
- // reset the hash so we don't try and disconnect this device again
- // device_count is decremented here
- cleanup_commandir_dev(commandir_spot);
-
- raise_event(COMMANDIR_UNPLUG_1 + commandir_spot);
-
- /* Cases are:
- removing device 0 when there's no more device (do nothing)
- removing device < MAX when there's still 1+ devices (patch up)
- removing device==MAX when there's more devices (do nothing)
- */
-
- // new device count-- from cleanup (if device_count > 0 AND commandir removed isn't 0 or max)
- if( (device_count > 0) && (commandir_spot != device_count) )
- {
- /* It wasn't the top device removed, and there's
- * more than 1 device, so we have some vars to patch up
- */
- for(x=commandir_spot; x<(device_count); x++)
- {
- channels_en[x] = channels_en[x+1];
- mini_freq[x] = mini_freq[x+1];
- commandir_last_signal_id[x] = commandir_last_signal_id[x+1];
- lastSendSignalID[x] = lastSendSignalID[x+1];
- memcpy(&open_commandir_devices[x],
- &open_commandir_devices[x+1],
- sizeof(struct commandir_device));
- }
-
- // Reset the TOP one that was just removed:
- channels_en[(int)device_count] = 0x0f;
- mini_freq[(int)device_count] = -1;
- commandir_last_signal_id[(int)device_count] = 0;
- lastSendSignalID[(int)device_count] = 0;
- open_commandir_devices[(int)device_count].cmdir_udev = 0;
- open_commandir_devices[(int)device_count].bus = 0;
- open_commandir_devices[(int)device_count].busdev = 0;
- open_commandir_devices[(int)device_count].interface = 0;
- open_commandir_devices[(int)device_count].hw_type = 0;
- open_commandir_devices[(int)device_count].hw_revision = 0;
- open_commandir_devices[(int)device_count].hw_subversion = 0;
-
- }
-
- if(commandir_rx_num>=commandir_spot)
- {
- commandir_rx_num--;
- }
-
- hardware_setorder();
-}
-
-static void hardware_setorder(){
- /* Tried to order to the detected CommandIRs based on bus and dev ids
- * so they remain the same on reboot. Adding a new device in front
- * will mean it becomes device 0 and emitters or scripts must be fixed
- * Need a different param, these still change.
- */
-
- tx_order[0] = tx_order[1] = tx_order[2] = tx_order[3] = 0;
- mini_freq[0] = mini_freq[1] = mini_freq[2] = mini_freq[3] = -1;
- int largest = 0;
- int tmpvals[4];
- int x, tx_spots, find_spot;
-
- for(x=0; x<device_count; x++)
- {
- tmpvals[x] = 256 * open_commandir_devices[x].bus +
- open_commandir_devices[x].busdev;
- }
-
- for(tx_spots = 0; tx_spots < device_count; tx_spots++)
- {
- largest = 0;
- for(find_spot = 0; find_spot < device_count; find_spot++)
- {
- if(tmpvals[find_spot] > tmpvals[largest])
- {
- largest = find_spot;
- }
- }
- tx_order[device_count - tx_spots - 1 ] = largest;
- tmpvals[largest] = 0;
- }
-
-
- // The formerly receiving CommandIR has been unplugged
- if(commandir_rx_num < 0)
- {
- if(device_count > 0)
- commandir_rx_num = 0;
- }
-
- // Clear all pending signals
- for(x=top_signalq; x >= 0; x--)
- {
- free(signalq[top_signalq]);
- }
- top_signalq = -1;
-
-}
-
-static void cleanup_commandir_dev(int spotnum)
-{
- int location, devnum;
-
- location = open_commandir_devices[spotnum].location;
- devnum = open_commandir_devices[spotnum].devnum;
-
- open_bus_hash[ location ][ devnum ] = 0;
- device_count--;
-
- if(open_commandir_devices[spotnum].cmdir_udev==NULL)
- {
- return;
- }
- usb_release_interface(open_commandir_devices[spotnum].cmdir_udev,
- open_commandir_devices[spotnum].interface);
- usb_close(open_commandir_devices[spotnum].cmdir_udev);
- open_commandir_devices[spotnum].cmdir_udev = NULL;
-}
-
-
-static void hardware_scan()
-{
- // Scan for hardware changes; libusb doesn't notify us...
- unsigned char located = 0;
- struct usb_bus *bus = 0;
- struct usb_device *dev = 0;
-
- int scan_find[MAX_DEVICES][2]; // [0]=bus#, [1]=busdev#
- unsigned char found = 0;
- // Using hash for performance instead of memory conservation (+1k)
- unsigned char still_found[USB_MAX_BUSES][USB_MAX_BUSDEV];
- unsigned changed = 0;
- int find_spot = 0;
-
- usb_find_busses();
- usb_find_devices();
-
- for (bus = usb_busses; bus; bus = bus->next)
- {
- for (dev = bus->devices; dev; dev = dev->next)
- {
- if (dev->descriptor.idVendor == USB_CMDIR_VENDOR_ID)
- {
- located++;
- // Do we already know about it?
- if(!open_bus_hash[bus->location][dev->devnum]){
- // Then it's new, open it if we have a spot available
- for(find_spot=0; find_spot < MAX_DEVICES; find_spot++)
- {
- if(open_commandir_devices[find_spot].cmdir_udev == NULL)
- {
- // Try to open here
- open_commandir_devices[find_spot].cmdir_udev = usb_open(dev);
- if(open_commandir_devices[find_spot].cmdir_udev == NULL)
- {
- logprintf(LOG_ERR,
- "Error opening commandir - bus %d, device %d.",
- bus, dev);
- break;
- }
- else
- {
-
- // Try to set configuration; not needed on Linux
-// int usb_set_configuration(usb_dev_handle *dev, int configuration);
- int r = 0;
-// r = usb_set_configuration(open_commandir_devices[find_spot].cmdir_udev, 1);
-// printf("Set_configuration returned %d.\n", r);
-
- r = usb_claim_interface(
- open_commandir_devices[find_spot].cmdir_udev,0);
- if(r < 0)
- {
- cleanup_commandir_dev(find_spot);
- logprintf(LOG_ERR,
- "Unable to claim CommandIR - Is it already busy?"
- );
- logprintf(LOG_ERR,
- "Try 'rmmod commandir' or check for other lircds"
- );
- break;
- }
- else
- {
- // great, it's ours
- open_commandir_devices[find_spot].location = bus->location;
- open_commandir_devices[find_spot].devnum = dev->devnum;
- open_bus_hash[bus->location][dev->devnum] = 1;
- open_commandir_devices[find_spot].bus = bus->location;
- open_commandir_devices[find_spot].busdev = dev->devnum;
- scan_find[++found][0] = bus->location;
- scan_find[found][1] = dev->devnum;
- device_count++;
- changed++;
- still_found[bus->location][dev->devnum] = 1;
-
- struct usb_config_descriptor *config = &dev->config[0];
- struct usb_interface *interface = &config->interface[0];
- struct usb_interface_descriptor *ainterface = &interface->altsetting[0];
-/* struct usb_endpoint_descriptor *endpoint = &ainterface->endpoint[2];*/
-
- int i;// Load wMaxPacketSize for each endpoint; subtract 0x80
- // for double-buffer bit
- for (i = 0; i < ainterface->bNumEndpoints; i++)
- {
- open_commandir_devices[find_spot].endpoint_max[
- (ainterface->endpoint[i].bEndpointAddress >= 0x80)
- ? (ainterface->endpoint[i].bEndpointAddress-0x80)
- : (ainterface->endpoint[i].bEndpointAddress)]
- = ainterface->endpoint[i].wMaxPacketSize;
- }
-
- // compensate for double buffer:
- open_commandir_devices[find_spot].endpoint_max[1] *= 2;
-
- // Always use the latest to RX:
- commandir_rx_num = find_spot;
-
- switch(dev->descriptor.iProduct)
- {
- case 2:
- logprintf(LOG_ERR, "Product identified as CommandIR II");
- open_commandir_devices[find_spot].hw_type = HW_COMMANDIR_2;
- open_commandir_devices[find_spot].hw_revision = 0;
- open_commandir_devices[find_spot].hw_subversion = 0;
-
- int send_status = 0, tries=20;
- static char get_version[] = {2, GET_VERSION};
-
- send_status = 4; // just to start the while()
-
- while(tries--){
- usleep(USB_TIMEOUT_US); // wait a moment
-
- // try moving this below:
- send_status = usb_bulk_write(
- open_commandir_devices[find_spot].cmdir_udev,
- 2, // endpoint2
- get_version,
- 2,
- 1500);
- if(send_status < 0)
- {
- logprintf(LOG_ERR,
- "Unable to write version request - Is CommandIR busy? Error %d", send_status);
- break;
- }
-
- send_status = usb_bulk_read(
- open_commandir_devices[find_spot].cmdir_udev,
- 1,
- (char *)commandir_data_buffer,
- open_commandir_devices[ find_spot ].endpoint_max[1],
- 1500);
-
- if(send_status < 0)
- {
- logprintf(LOG_ERR,
- "Unable to read version request - Is CommandIR busy? Error %d", send_status);
- cleanup_commandir_dev(find_spot);
- break;
- }
- if(send_status==3)
- {
- if(commandir_data_buffer[0]==GET_VERSION)
- {
- // Sending back version information.
- open_commandir_devices[find_spot].hw_revision =
- commandir_data_buffer[1];
- open_commandir_devices[find_spot].hw_subversion =
- commandir_data_buffer[2];
- logprintf(LOG_ERR, "Hardware revision is %d.%d.",
- commandir_data_buffer[1], commandir_data_buffer[2]);
- break;
- }
- else
- {
- continue;
- }
- }
-
- }
- break;
- default:
- logprintf(LOG_ERR, "Product identified as CommandIR Mini");
- open_commandir_devices[find_spot].hw_type =
- HW_COMMANDIR_MINI;
- }
-
- if(open_commandir_devices[find_spot].hw_type ==
- HW_COMMANDIR_UNKNOWN)
- {
- logprintf(LOG_ERR, "Product UNKNOWN - cleanup");
- cleanup_commandir_dev(find_spot);
- }
- else
- {
- lastSendSignalID[find_spot] = 0;
- commandir_last_signal_id[find_spot] = 0;
- }
- break; // don't keep looping through find_spot
- } // claim?
- }// open?
- }// spot available?
- }// for(spots)
- } // if we haven't seen it before
- else
- {
- still_found[bus->location][dev->devnum] = 1;
- }
- }// if it's a CommandIR
- }// for bus dev's
- }// for bus's
-
- if(!located)
- {
- logprintf(LOG_ERR, "No CommandIRs found");
- }
-
- /* Check if any we currently know about have been removed
- * (Usually, we get a read/write error first)
- */
- for(find_spot = 0; find_spot < MAX_DEVICES; find_spot++)
- {
- if(open_commandir_devices[find_spot].cmdir_udev != NULL)
- {
- if(still_found[open_commandir_devices[find_spot].location]
- [open_commandir_devices[find_spot].devnum] != 1)
- {
- logprintf(LOG_ERR, "Commandir %d removed from [%d][%d].", find_spot,open_commandir_devices[find_spot].location, open_commandir_devices[find_spot].devnum);
- raise_event(COMMANDIR_UNPLUG_1 + find_spot);
- hardware_disconnect(find_spot);
- commandir_rx_num = -1;
- changed++;
- }
- }
- }
-
- if(changed)
- {
- hardware_setorder();
- raise_event(COMMANDIR_REORDERED);
- }
-
-}
-
-
-// Shutdown everything and terminate
-static void shutdown_usb()
-{
- int x;
-
- // Wait for any TX to complete before shutting down
- if(top_signalq >= 0)
- {
- shutdown_pending++;
- logprintf(LOG_ERR, "Waiting for signals to finish transmitting before shutdown");
- return;
- }
-
- for(x=0; x<MAX_DEVICES; x++)
- {
- if(open_commandir_devices[x].cmdir_udev )
- {
- usb_release_interface(open_commandir_devices[x].cmdir_udev,
- open_commandir_devices[x].interface);
- usb_close(open_commandir_devices[x].cmdir_udev);
- }
- }
- logprintf(LOG_ERR, "CommandIR driver child cleaned up and exiting");
- raise_event(COMMANDIR_STOPPED);
-
- _exit(EXIT_SUCCESS);
-}
-
-static void commandir_read_loop()
-{
- // Read from CommandIR, Write to pipe
-
- unsigned char commands[MAX_COMMAND];
- int curCommandStart = 0;
- int curCommandLength = 0;
- int bytes_read;
- unsigned char periodic_checks = 0;
- static unsigned char rx_decode_led[7] = {7, PROC_SET, 0x40, 0, 0,4, 2};
- static unsigned char init_led[7] = {7, PROC_SET, 0x00, 0x01, 3, 55, 2};
- static unsigned char deinit_led[7] = {7, PROC_SET, 0x0, 0x02, 3, 45, 2};
- static unsigned int LIRC_frequency = 38000;
-
- int send_status = 0;
- int i = 0;
- int tmp = 0;
- int tmp2 = 0;
-
- raise_event(COMMANDIR_READY);
-
- for(;;){
- /*** This is the main loop the monitors control and TX events from
- * the parent, and monitors the CommandIR RX buffer
- */
-
- curCommandStart = 0;
- curCommandLength = 0;
- bytes_read = read(tochild_read, commands, MAX_COMMAND);
-
- if(shutdown_pending > 0 && (top_signalq==-1))
- shutdown_usb();
-
- if(bytes_read > 0){
-
- while(curCommandStart < bytes_read){
- curCommandLength = commands[curCommandStart] +
- commands[curCommandStart + 1] * 256;
-
- switch(commands[curCommandStart + 2]){ // the control value
- case DEINIT_HEADER_LIRC:
- for(i=0; i<device_count; i++)
- {
- if(open_commandir_devices[tx_order[i]].hw_type ==
- HW_COMMANDIR_2)
- {
- if(open_commandir_devices[tx_order[i]].cmdir_udev > 0)
- {
- send_status=usb_bulk_write(
- open_commandir_devices[tx_order[i]].cmdir_udev,
- 2, // endpoint2
- (char*)deinit_led,
- 7, // bytes
- USB_TIMEOUT_MS);
- }
- rx_hold = 1; // Put a hold on RX, but queue events
- }
- }
-
- break;
- case INIT_HEADER_LIRC:
- for(i=0; i<device_count; i++)
- {
- if(open_commandir_devices[tx_order[i]].hw_type ==
- HW_COMMANDIR_2)
- {
- if(open_commandir_devices[tx_order[i] ].cmdir_udev > 0)
- {
- send_status=usb_bulk_write(
- open_commandir_devices[tx_order[i] ].cmdir_udev,
- 2, // endpoint2
- (char*)init_led,
- 7, // bytes
- USB_TIMEOUT_MS);
- }
- rx_hold = 0; // Resume RX after queue events
- }
- }
- break;
- case RXDECODE_HEADER_LIRC:
- // Successful RX decode: show it on the light.
- if(open_commandir_devices[commandir_rx_num].cmdir_udev > 0)
- {
- send_status=usb_bulk_write(
- open_commandir_devices[commandir_rx_num].cmdir_udev,
- 2, // endpoint2
- (char*)rx_decode_led,
- 7, // bytes
- USB_TIMEOUT_MS);
-
- }
- break;
-
- case FREQ_HEADER_LIRC:
- LIRC_frequency = (commands[curCommandStart + 6] & 0x000000ff) |
- ((commands[curCommandStart + 5] << 8) & 0x0000ff00) |
- ((commands[curCommandStart + 4] << 16) & 0x00ff0000) |
- ((commands[curCommandStart + 3] << 24) & 0xff000000);
- if(!LIRC_frequency)
- LIRC_frequency = DEFAULT_FREQ;
- break;
- case TX_HEADER_NEW:
- case TX_LIRC_T:
- if(curCommandLength==64)
- {
- if(check_irsend_commandir(&commands[curCommandStart + 4]))
- {
- break; // it's a command for us
- }
- }
- add_to_tx_pipeline(&commands[curCommandStart + 4],
- curCommandLength - 4, pre_pipeline_emitter_mask, LIRC_frequency);
- break;
-
- case CHANNEL_EN_MASK:
- pre_pipeline_emitter_mask = (commands[curCommandStart+4] << 8) |
- commands[curCommandStart+3];
- break;
- }
- curCommandStart += curCommandLength;
-
- }
- }
- // If we're receiving, make sure the commandir buffer doesn't overrun
- if(commandir_read() < 20 )
- tmp = 2;
- while(tmp-- > 0)
- {
- tmp2 = commandir_read();
-// printf("commandir_read() (%d) returning %d.\n", tmp,tmp2);
- }
- if(tmp2 < 20 ){
- // once in a while, but never while we're retreaving a signal
- if(++periodic_checks>100)
- {
- hardware_scan();
- periodic_checks = 0;
- }
- else
- {
- usleep(read_delay);
- }
- }
- }
-
-}
-
-static int check_irsend_commandir(unsigned char *command)
-{
- // decode the code like LIRC would do, and take an action
- int commandir_code = 0;
-
- commandir_code = commandir_decode((char*)command);
-
- if(commandir_code > 0xef)
- {
- // It's a settransmitters command
- int channel = commandir_code & 0x0f;
-
- // can only set 1 bit from here so far..,
- pre_pipeline_emitter_mask = 0x0001 << channel;
-
- return commandir_code;
- }
-
- switch(commandir_code)
- {
- case 0x53:
- read_delay /= 2; // "faster" means less time
- if(read_delay < MIN_WAIT_BETWEEN_READS_US)
- read_delay = MIN_WAIT_BETWEEN_READS_US;
- break;
- case 0x54:
- read_delay *= 2; // "slower" means more time
- if(read_delay > MAX_WAIT_BETWEEN_READS_US)
- read_delay = MAX_WAIT_BETWEEN_READS_US;
- break;
-
- case 0x09:
- case 0x0A:
- logprintf(LOG_ERR, "Re-selecting RX not implemented yet");
- break;
-
- case 0xe6: // disable-fast-decode
- logprintf(LOG_ERR, "Fast decoding disabled");
- insert_fast_zeros = 0;
- break;
-
- case 0xe7: // enable-fast-decode
- case 0xe9: // force-fast-decode-2
- logprintf(LOG_ERR, "Fast decoding enabled");
- insert_fast_zeros = 2;
- break;
-
- case 0xe8: // force-fast-decode-1
- logprintf(LOG_ERR, "Fast decoding enabled (1)");
- insert_fast_zeros = 1;
- break;
-
- default:
- if(commandir_code > 0x60 && commandir_code < 0xf0)
- {
- int ledhigh = 0, ledlow = 0, ledprog = -1;
- // LED Command
- switch(commandir_code >> 4)
- {
- case 0x6: ledlow = 0x80; break;
- case 0x7: ledlow = 0x40; break;
- case 0x8: ledlow = 0x20; break;
- case 0x9: ledlow = 0x10; break;
- case 0xa: ledlow = 0x04; break;
- case 0xb: ledhigh = 0x80; break;
- case 0xc: ledlow = 0x01; break;
- case 0xd: ledlow = 0x02; break;
- case 0xe: ledlow = 0x08; break;
- }
- ledprog = (commandir_code & 0x0f) - 1;
-
- if( ((ledhigh + ledlow) > 0) && ledprog > -1)
- {
- // Set light:
- static unsigned char lightchange[7] = {7,
- PROC_SET, 0, 0, 0, 0, 3};
- lightchange[2] = ledhigh;
- lightchange[3] = ledlow;
- lightchange[4] = ledprog;
- int send_status = 0;
-
- send_status=usb_bulk_write(
- open_commandir_devices[tx_order[0]].cmdir_udev,
- 2, // endpoint2
- (char *)lightchange,
- 7, // bytes
- USB_TIMEOUT_MS);
- }
-
- return commandir_code; // done
- }
-
- }
-
- return commandir_code;
-}
-
-
-// return how many RX's were in the last receive; so we know whether to poll more frequently or not
-static int commandir_read()
-{
-
- /*** Which CommandIRs do we have to read from? Poll RX CommandIRs
- * regularly, but non-receiving CommandIRs should be more periodically
- */
-
- int i,j;
- int read_received = 0;
- int read_retval = 0;
- int conv_retval = 0;
- int max_read = 5;
- static int zeroterminated = 0;
-
- for(i=0; i<device_count; i++)
- {
-
- switch(open_commandir_devices[tx_order[i]].hw_type)
- {
- case HW_COMMANDIR_2:
-
- read_retval = usb_bulk_read(
- open_commandir_devices[ tx_order[i] ].cmdir_udev,
- 1,
- (char *)commandir_data_buffer,
- open_commandir_devices[ tx_order[i] ].endpoint_max[1],
- 5000);
-
- if(read_retval==0)
- break;
-
- if(read_retval < 1)
- {
- if(read_retval < 0)
- {
- if(read_retval == -19){
- logprintf(LOG_ERR, "Read Error - CommandIR probably unplugged");
- }
- else
- {
- logprintf(LOG_ERR,
- "Didn't receive a full packet from a CommandIR II! - err %d ."
- , read_retval);
- }
- hardware_disconnect(tx_order[i]);
- hardware_scan();
- }
- // 0 bytes is the most frequency case; nothing to report
-
- break;
- }
-
- if(commandir_data_buffer[0]==RX_HEADER_TXAVAIL)
- {
- // sending us the current tx_start, tx_end arrays, and where it's at
- commandir_tx_start[tx_order[i]*4] = commandir_data_buffer[4];
- commandir_tx_start[tx_order[i]*4+1] = commandir_data_buffer[3];
- commandir_tx_start[tx_order[i]*4+2] = commandir_data_buffer[2];
- commandir_tx_start[tx_order[i]*4+3] = commandir_data_buffer[1];
-
- commandir_tx_end[tx_order[i]*4] = commandir_data_buffer[8];
- commandir_tx_end[tx_order[i]*4+1] = commandir_data_buffer[7];
- commandir_tx_end[tx_order[i]*4+2] = commandir_data_buffer[6];
- commandir_tx_end[tx_order[i]*4+3] = commandir_data_buffer[5];
-
- commandir_last_signal_id[ tx_order[i] ] = commandir_data_buffer[9];
-
- recalc_tx_available(tx_order[i]);
- pipeline_check();
- if(top_signalq > 0)
- {
- read_received++;
- }
-
- // This ALSO implies there's NO MORE RX DATA.
- lirc_t lirc_zero_buffer[2] = {0, 0};
-
- int tmp4 = 0;
- if(zeroterminated>1001)
- {
- // Send LIRC a 0,0 packet to allow IMMEDIATE decoding
- if(insert_fast_zeros > 0)
- {
- tmp4 = write(child_pipe_write, lirc_zero_buffer, sizeof(lirc_t)*insert_fast_zeros);
- }
- zeroterminated = 0;
- }
- else
- {
- if((zeroterminated < 1000) && (zeroterminated > 0))
- zeroterminated += 1000;
- if(zeroterminated > 1000)
- zeroterminated++;
- }
-
- break;
- }
-
-
- if(commandir_data_buffer[0]==RX_HEADER_EVENTS)
- {
- for(j=1; j<(read_retval); j++)
- {
- raise_event(commandir_data_buffer[j]+tx_order[i]*0x10);
- }
- }
- else
- {
- if( (commandir_data_buffer[0]==RX_HEADER_DATA) &&
- (commandir_rx_num==tx_order[i]) )
- {
- if(rx_hold==0) // Only if we should be listening for remote cmds
- {
- zeroterminated = 1;
- conv_retval = commandir2_convert_RX(
- (unsigned short *)&commandir_data_buffer[2],
- commandir_data_buffer[1]);
- read_received = conv_retval; // header
- }
- }
- }
- break;
-
- case HW_COMMANDIR_MINI:
-
- max_read = 5;
- while(max_read--){
-
- read_retval = usb_bulk_read(
- open_commandir_devices[ tx_order[i] ].cmdir_udev,
- 1,
- (char *)commandir_data_buffer,
- 64,
- USB_TIMEOUT_MS);
-
- if (!(read_retval == MAX_HW_MINI_PACKET))
- {
- if(read_retval == -19){
- logprintf(LOG_ERR, "Read Error - CommandIR probably unplugged");
- }
- else
- {
- logprintf(LOG_ERR,
- "Didn't receive a full packet from a Mini! - err %d ."
- , read_retval);
- }
-
- hardware_disconnect(tx_order[i]);
- hardware_scan();
- break;
- }
-
-
- if ( (commandir_data_buffer[1] > 0) &&
- (commandir_rx_num==tx_order[i]) )
- {
- conv_retval = cmdir_convert_RX(commandir_data_buffer);
-
- read_received += commandir_data_buffer[1];
-
- if(commandir_data_buffer[1] < 20)
- {
- // Lots of hardware buffer room left; don't tie up CPU
- break;
- }
- }
- else
- {
- break;
- }
- } // while; should only repeat if there's more RX data
-
- /* CommandIR Mini only has 1 buffer */
- commandir_tx_start[tx_order[i]*4] = 0;
- commandir_tx_start[tx_order[i]*4+1] = 0;
- commandir_tx_start[tx_order[i]*4+2] = 0;
- commandir_tx_start[tx_order[i]*4+3] = 0;
-
- commandir_tx_end[tx_order[i]*4] = commandir_data_buffer[2];
- commandir_tx_end[tx_order[i]*4+1] = commandir_data_buffer[2];
- commandir_tx_end[tx_order[i]*4+2] = commandir_data_buffer[2];
- commandir_tx_end[tx_order[i]*4+3] = commandir_data_buffer[2];
-
- /* .. and it can't pipeline... */
- commandir_last_signal_id[i] = lastSendSignalID[i];
- recalc_tx_available(tx_order[i]);
- pipeline_check();
- break;
- case HW_COMMANDIR_UNKNOWN:
- break;
- } // end switch
- } // for each attached hardware device
- return read_received;
-}
-
-static void setEmitterMask(int bitmask)
-{
- channels_en[0] = bitmask & 0x0F;
- channels_en[1] = (bitmask >> 4) & 0xfF;
- channels_en[2] = (bitmask >> 8) & 0xfF;
- channels_en[3] = (bitmask >> 12) & 0xfF;
-}
-
-
-static int commandir2_convert_RX(unsigned short *bufferrx,
- unsigned char numvalues)
-{
- // convert hardware timestamp values to elapsed time values
-
- int i;
- int curpos = 0;
- int bytes_w = 0;
- lirc_t lirc_data_buffer[256];
-
- i=0;
- int pca_count = 0;
- int overflows = 0;
-
- while(curpos < numvalues )
- {
- pca_count = (bufferrx[curpos] & 0x3fff) << 2;
- pca_count = pca_count / 12;
-
- if(bufferrx[curpos] & COMMANDIR_2_OVERFLOW_MASK)
- {
- overflows = bufferrx[curpos+1];
- lirc_data_buffer[i] = pca_count + (overflows * 0xffff / 12);
-
- if(bufferrx[curpos] & COMMANDIR_2_PULSE_MASK)
- {
- lirc_data_buffer[i] |= PULSE_BIT;
- }
- curpos++;
-
- }
- else
- {
- lirc_data_buffer[i] = pca_count;
- if(bufferrx[curpos] & COMMANDIR_2_PULSE_MASK)
- {
- lirc_data_buffer[i] |= PULSE_BIT;
- }
- }
-
- curpos++;
- i++;
- if(i> 255)
- {
- break;
- }
- }
-
- bytes_w = write(child_pipe_write, lirc_data_buffer, sizeof(lirc_t)*i);
-
- if (bytes_w < 0)
- {
- logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
- return 0;
- }
-
- return bytes_w;
-}
-
-
-
-
-// Originally from lirc_cmdir.c
-static int cmdir_convert_RX(unsigned char *orig_rxbuffer)
-{
- unsigned int num_data_values = 0;
- unsigned int num_data_bytes = 0;
- unsigned int asint1 = 0, asint2 = 0, overflows = 0;
- int i;
- int bytes_w; // Pipe write
- lirc_t lirc_data_buffer[256];
-
-
- num_data_bytes = orig_rxbuffer[1];
-
- /* check if num_bytes is multiple of 3; if not, error */
- if (num_data_bytes%3 > 0) return -1;
- if (num_data_bytes > 60) return -3;
- if (num_data_bytes < 3) return -2;
-
- num_data_values = num_data_bytes/3;
-
- asint2 = orig_rxbuffer[3] + orig_rxbuffer[4] * 0xff;
- if(last_mc_time==-1)
- {
- // The first time we run there's no previous time value
- last_mc_time = asint2 - 110000;
- if(last_mc_time < 0) last_mc_time+=0xffff;
- }
-
- asint1 = last_mc_time;
- overflows = orig_rxbuffer[5];
-
- for(i=2; i<num_data_values+2; i++)
- {
- if(overflows < 0xff)
- {
- // space
- lirc_data_buffer[i-2] = get_time_value(asint1,
- asint2, overflows) - 26;
- }
- else
- { // pulse
- lirc_data_buffer[i-2] = get_time_value(asint1,
- asint2, 0) + 26;
- lirc_data_buffer[i-2] |= PULSE_BIT;
- }
- asint1 = asint2;
- asint2 = orig_rxbuffer[i*3] + orig_rxbuffer[i*3+1] * 0xff;
- overflows = orig_rxbuffer[i*3+2];
- }
- last_mc_time = asint1;
-
-
- bytes_w = write(child_pipe_write, lirc_data_buffer, sizeof(lirc_t)*num_data_values);
-
- if (bytes_w < 0)
- {
- logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
- goto done;
- }
-
-done:
- return bytes_w;
-
-}
-
-
-
-
-static unsigned int get_time_value(unsigned int firstint,
- unsigned int secondint, unsigned char overflow)
-{
- /* get difference between two MCU timestamps, CommandIR Mini version */
- unsigned int t_answer = 0;
-
- if (secondint > firstint)
- {
- t_answer = secondint - firstint + overflow*0xffff;
- }
- else
- {
- if (overflow > 0)
- {
- t_answer = (65536 - firstint) + secondint + (overflow - 1)*0xffff - 250;
- }
- else
- {
- t_answer = (65536 - firstint) + secondint;
- }
- }
-
- /* clamp to long signal */
- if (t_answer > 16000000) t_answer = PULSE_MASK;
- return t_answer;
-}
-
-
-static void raise_event(unsigned int eventid)
-{
- /* Raise an LIRC Event by
- * Generating lirc_t Pattern
- */
- static lirc_t event_data[18] = {LIRCCODE_GAP, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- int i, bytes_w;
-
- // logprintf(LOG_ERR, "Raising event %d", eventid);
- for(i=0; i<8; i++)
- {
- if( (eventid & 0x80) )
- {
- event_data[i*2+1] = signal_base[0][0];
- event_data[i*2+2] = signal_base[0][1];
- }
- else
- {
- event_data[i*2+1] = signal_base[1][0];
- event_data[i*2+2] = signal_base[1][1];
- }
- eventid = eventid << 1;
- }
-
- event_data[16] = LIRCCODE_GAP*4;
-
- bytes_w = write(child_pipe_write, event_data, sizeof(lirc_t) * 17);
-
- if (bytes_w < 0)
- {
- logprintf(LOG_ERR, "Can't write to LIRC pipe! %d", child_pipe_write);
- }
-
-}
-
-static int commandir_decode(char *command)
-{
- // Decode the signal to a number, just like LIRC;
- // there's probably a built-in way to do this.
- int i;
- int code = 0;
-
- lirc_t *codes;
- codes = (lirc_t *)command;
-
- for(i=0; i<15; i+=2)
- {
- code = code << 1;
- if(codes[i]==100)
- code |= 1;
- }
- return code;
-}
-
diff --git a/abs/core/lirc_085/hw_commandir.h b/abs/core/lirc_085/hw_commandir.h
deleted file mode 100755
index 2280f6c..0000000
--- a/abs/core/lirc_085/hw_commandir.h
+++ /dev/null
@@ -1,175 +0,0 @@
-
-/****************************************************************************
- ** hw_commandir.h **********************************************************
- ****************************************************************************
- *
- * Copyright (C) 1999 Christoph Bartelmus <lirc@bartelmus.de>
- * -- Original hw_default.h
- * Modified for CommandIR Transceivers, April-June 2008, Matthew Bodkin
- *
- */
-
-#ifndef HW_COMMANDIR_H
-#define HW_COMMANDIR_H
-
-#define RX_BUFFER_SIZE 1024
-#define TX_BUFFER_SIZE 1024
-#define TX_QUEUE 1
-#define RX_QUEUE 0
-#define MAX_COMMANDIRS 4
-#define MAX_COMMAND 8192
-
-/* transmitter channel control */
-#define MAX_DEVICES 4
-#define MAX_CHANNELS 16
-#define DEVICE_CHANNELS 4
-#define MAX_MASK 0xffff
-#define MAX_SIGNALQ 100
-
-/* CommandIR control codes */
-#define CHANNEL_EN_MASK 1
-#define FREQ_HEADER 2
-#define MCU_CTRL_SIZE 3
-#define TX_HEADER 7
-#define TX_HEADER_NEW 8
-/* New for CommandIR II */
-
-#define READ_INPUTS 10
-#define PROC_SET 11
-#define INIT_FUNCTION 12
-#define RX_SELECT 13
-#define TX_COMMANDIR_II 14
-/* Internal to driver */
-#define TX_LIRC_T 15
-#define FREQ_HEADER_LIRC 16
-#define RXDECODE_HEADER_LIRC 17
-#define INIT_HEADER_LIRC 18
-#define DEINIT_HEADER_LIRC 19
-#define GET_VERSION 20
-
-#define COMMANDIR_2_PULSE_MASK 0x8000
-#define COMMANDIR_2_OVERFLOW_MASK 0x4000
-
-#define DEFAULT_PULSE_WIDTH 13
-
-#define USB_CMDIR_VENDOR_ID 0x10c4
-#define USB_CMDIR_PRODUCT_ID 0x0003
-#define USB_CMDIR_MINOR_BASE 192
-
-#define HW_COMMANDIR_MINI 1
-#define HW_COMMANDIR_2 2
-#define HW_COMMANDIR_UNKNOWN 127
-
-#define MAX_HW_MINI_PACKET 64
-
-// CommandIR has lots of buffer room, we don't need to poll constantly
-#define USB_TIMEOUT_MS 5000
-#define USB_TIMEOUT_US 1000
-#define WAIT_BETWEEN_READS_US 10000
-#define MAX_WAIT_BETWEEN_READS_US 5000000
-#define MIN_WAIT_BETWEEN_READS_US 5000
-
-#define USB_MAX_BUSES 8
-#define USB_MAX_BUSDEV 127
-
-#define RX_HEADER_DATA 0x01
-#define RX_HEADER_EVENTS 0x02
-#define RX_HEADER_TXAVAIL 0x03
-
-
-// We keep CommandIR's OPEN even on -deinit for speed and to monitor
-// Other non-LIRC events (plugin, suspend, etc)
-#define USB_KEEP_WARM 1
-
-// CommandIR lircd.conf event driven code definitions
-#define LIRCCODE_GAP 125000
-#define JACK_PLUG_1 0x01
-#define JACK_PLUG_2 0x02
-#define JACK_PLUG_3 0x03
-#define JACK_PLUG_4 0x04
-#define JACK_PLUG_5 0x11
-#define JACK_PLUG_6 0x12
-#define JACK_PLUG_7 0x13
-#define JACK_PLUG_8 0x14
-#define JACK_PLUG_9 0x21
-#define JACK_PLUG_10 0x22
-#define JACK_PLUG_11 0x23
-#define JACK_PLUG_12 0x24
-#define JACK_PLUG_13 0x31
-#define JACK_PLUG_14 0x32
-#define JACK_PLUG_15 0x33
-#define JACK_PLUG_16 0x34
-
-#define JACK_UNPLUG_1 0x05
-#define JACK_UNPLUG_2 0x06
-#define JACK_UNPLUG_3 0x07
-#define JACK_UNPLUG_4 0x08
-#define JACK_UNPLUG_5 0x15
-#define JACK_UNPLUG_6 0x16
-#define JACK_UNPLUG_7 0x17
-#define JACK_UNPLUG_8 0x18
-#define JACK_UNPLUG_9 0x25
-#define JACK_UNPLUG_10 0x26
-#define JACK_UNPLUG_11 0x27
-#define JACK_UNPLUG_12 0x28
-#define JACK_UNPLUG_13 0x35
-#define JACK_UNPLUG_14 0x36
-#define JACK_UNPLUG_15 0x37
-#define JACK_UNPLUG_16 0x38
-
-#define SELECT_TX_INTERNAL 0x09
-#define SELECT_TX_ExTERNAL 0x0A
-
-#define SELECT_TX_ON_1 0x0D
-#define SELECT_TX_ON_2 0x1D
-#define SELECT_TX_ON_3 0x2D
-#define SELECT_TX_ON_4 0x3D
-
-#define JACK_PLUG_RX_1 0x0B
-#define JACK_UNPLUG_RX_1 0x0C
-#define JACK_PLUG_RX_2 0x1B
-#define JACK_UNPLUG_RX_2 0x1C
-#define JACK_PLUG_RX_3 0x2B
-#define JACK_UNPLUG_RX_3 0x2C
-#define JACK_PLUG_RX_4 0x3B
-#define JACK_UNPLUG_RX_4 0x3C
-
-#define COMMANDIR_PLUG_1 0x41
-#define COMMANDIR_PLUG_2 0x42
-#define COMMANDIR_PLUG_3 0x43
-#define COMMANDIR_PLUG_4 0x44
-
-#define COMMANDIR_UNPLUG_1 0x45
-#define COMMANDIR_UNPLUG_2 0x46
-#define COMMANDIR_UNPLUG_3 0x47
-#define COMMANDIR_UNPLUG_4 0x48
-
-#define COMMANDIR_REORDERED 0x50
-#define COMMANDIR_READY 0x51
-#define COMMANDIR_STOPPED 0x52
-#define COMMANDIR_POLL_FASTER 0x53
-#define COMMANDIR_POLL_SLOWER 0x54
-
-#define SETTRANSMITTERS_1 0xf0
-#define SETTRANSMITTERS_2 0xf1
-#define SETTRANSMITTERS_3 0xf2
-#define SETTRANSMITTERS_4 0xf3
-#define SETTRANSMITTERS_5 0xf4
-#define SETTRANSMITTERS_6 0xf5
-#define SETTRANSMITTERS_7 0xf6
-#define SETTRANSMITTERS_8 0xf7
-#define SETTRANSMITTERS_9 0xf8
-#define SETTRANSMITTERS_10 0xf9
-#define SETTRANSMITTERS_11 0xfa
-#define SETTRANSMITTERS_12 0xfb
-#define SETTRANSMITTERS_13 0xfc
-#define SETTRANSMITTERS_14 0xfd
-#define SETTRANSMITTERS_15 0xfe
-#define SETTRANSMITTERS_16 0xff
-
-// What's in a returning data packet
-#define COMMANDIR_RX_EVENTS 0x02
-#define COMMANDIR_RX_DATA 0x01
-
-
-#endif
diff --git a/abs/core/lirc_085/kernel-2.6.26.patch b/abs/core/lirc_085/kernel-2.6.26.patch
deleted file mode 100644
index 74bb986..0000000
--- a/abs/core/lirc_085/kernel-2.6.26.patch
+++ /dev/null
@@ -1,122 +0,0 @@
---- a/drivers/kcompat.h 2008-01-13 11:26:28.000000000 +0100
-+++ b/drivers/kcompat.h 2008-05-14 18:37:49.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: kcompat.h,v 5.34 2008/01/13 10:26:28 lirc Exp $ */
-+/* $Id: kcompat.h,v 5.36 2008/05/14 16:37:49 lirc Exp $ */
-
- #ifndef _KCOMPAT_H
- #define _KCOMPAT_H
-@@ -36,10 +36,10 @@
- class_simple_destroy(cls);
- }
-
--#define lirc_class_device_create(cs, parent, dev, device, fmt, args...) \
-- class_simple_device_add(cs, dev, device, fmt, ## args)
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+ class_simple_device_add(cs, dev, parent, fmt, ## args)
-
--static inline void class_device_destroy(lirc_class_t *cls, dev_t devt)
-+static inline void lirc_device_destroy(lirc_class_t *cls, dev_t devt)
- {
- class_simple_device_remove(devt);
- }
-@@ -48,20 +48,40 @@
-
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
-
--#define lirc_class_device_create(cs, parent, dev, device, fmt, args...) \
-- class_device_create(cs, dev, device, fmt, ## args)
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+ class_device_create(cs, dev, parent, fmt, ## args)
-
- #else /* >= 2.6.15 */
-
--#define lirc_class_device_create class_device_create
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
-+
-+#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+ class_device_create(cs, NULL, dev, parent, fmt, ## args)
-+
-+#else /* >= 2.6.26 */
-+
-+#define lirc_device_create device_create
-+
-+#endif /* >= 2.6.26 */
-+
- #define LIRC_DEVFS_PREFIX
-
--#endif
-+#endif /* >= 2.6.15 */
-
- typedef struct class lirc_class_t;
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
-+
-+#define lirc_device_destroy class_device_destroy
-+
-+#else
-+
-+#define lirc_device_destroy device_destroy
-+
- #endif
-
-+#endif /* >= 2.6.13 */
-+
- #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 0)
- #define LIRC_HAVE_DEVFS
- #define LIRC_HAVE_DEVFS_24
-@@ -133,8 +153,8 @@
- #ifndef LIRC_HAVE_SYSFS
- #define class_destroy(x) do { } while (0)
- #define class_create(x, y) NULL
--#define class_device_destroy(x, y) do { } while (0)
--#define lirc_class_device_create(x, y, z, xx, yy, zz) 0
-+#define lirc_class_destroy(x, y) do { } while (0)
-+#define lirc_class_create(x, y, z, xx, yy, zz) 0
- #define IS_ERR(x) 0
- typedef struct class_simple
- {
---- a/drivers/lirc_dev/lirc_dev.c 2008-01-13 11:45:02.000000000 +0100
-+++ b/drivers/lirc_dev/lirc_dev.c 2008-05-14 18:37:49.000000000 +0200
-@@ -17,7 +17,7 @@
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-- * $Id: lirc_dev.c,v 1.56 2008/01/13 10:45:02 lirc Exp $
-+ * $Id: lirc_dev.c,v 1.58 2008/05/14 16:37:49 lirc Exp $
- *
- */
-
-@@ -145,7 +145,8 @@
- #ifdef LIRC_HAVE_DEVFS_26
- devfs_remove(DEV_LIRC "/%u", ir->p.minor);
- #endif
-- class_device_destroy(lirc_class, MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
-+ lirc_device_destroy(lirc_class,
-+ MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
-
- if (ir->buf != ir->p.rbuf) {
- lirc_buffer_free(ir->buf);
-@@ -400,9 +401,9 @@
- S_IFCHR|S_IRUSR|S_IWUSR,
- DEV_LIRC "/%u", ir->p.minor);
- #endif
-- (void) lirc_class_device_create(lirc_class, NULL,
-- MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
-- ir->p.dev, "lirc%u", ir->p.minor);
-+ (void) lirc_device_create(lirc_class, ir->p.dev,
-+ MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
-+ "lirc%u", ir->p.minor);
-
- if (p->sample_rate || p->get_queue) {
- /* try to fire up polling thread */
-@@ -441,7 +442,8 @@
- return minor;
-
- out_sysfs:
-- class_device_destroy(lirc_class, MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
-+ lirc_device_destroy(lirc_class,
-+ MKDEV(IRCTL_DEV_MAJOR, ir->p.minor));
- #ifdef LIRC_HAVE_DEVFS_24
- devfs_unregister(ir->devfs_handle);
- #endif
diff --git a/abs/core/lirc_085/kernel-2.6.27.patch b/abs/core/lirc_085/kernel-2.6.27.patch
deleted file mode 100644
index 05cf75b..0000000
--- a/abs/core/lirc_085/kernel-2.6.27.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-diff -Nur lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c lirc-0.8.3/drivers/lirc_dev/lirc_dev.c
---- lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c 2008-01-13 11:45:02.000000000 +0100
-+++ lirc-0.8.3/drivers/lirc_dev/lirc_dev.c 2008-10-10 16:29:15.000000000 +0200
-@@ -49,7 +49,7 @@
- #include <linux/uaccess.h>
- #include <linux/errno.h>
- #endif
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)
- #include <linux/wrapper.h>
- #endif
-diff -Nur lirc-0.8.3.orig/drivers/lirc_i2c/lirc_i2c.c lirc-0.8.3/drivers/lirc_i2c/lirc_i2c.c
---- lirc-0.8.3.orig/drivers/lirc_i2c/lirc_i2c.c 2008-05-04 15:49:53.000000000 +0200
-+++ lirc-0.8.3/drivers/lirc_i2c/lirc_i2c.c 2008-10-10 16:29:00.000000000 +0200
-@@ -54,7 +54,7 @@
- #include <linux/i2c.h>
- #include <linux/i2c-algo-bit.h>
-
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
-
- #include "drivers/kcompat.h"
- #include "drivers/lirc_dev/lirc_dev.h"
---- lirc-0.8.3.orig/drivers/kcompat.h 2008/05/14 16:37:49 5.36
-+++ lirc-0.8.3.orig/drivers/kcompat.h 2008/09/27 08:16:15 5.37
-@@ -36,7 +36,7 @@
- class_simple_destroy(cls);
- }
-
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- class_simple_device_add(cs, dev, parent, fmt, ## args)
-
- static inline void lirc_device_destroy(lirc_class_t *cls, dev_t devt)
-@@ -48,20 +48,29 @@
-
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
-
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- class_device_create(cs, dev, parent, fmt, ## args)
-
- #else /* >= 2.6.15 */
-
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26)
-
--#define lirc_device_create(cs, parent, dev, fmt, args...) \
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
- class_device_create(cs, NULL, dev, parent, fmt, ## args)
-
- #else /* >= 2.6.26 */
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
-+
-+#define lirc_device_create(cs, parent, dev, drvdata, fmt, args...) \
-+ class_device_create(cs, parent, dev, fmt, ## args)
-+
-+#else /* >= 2.6.27 */
-+
- #define lirc_device_create device_create
-
-+#endif /* >= 2.6.27 */
-+
- #endif /* >= 2.6.26 */
-
- #define LIRC_DEVFS_PREFIX
---- lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c 2008/09/06 07:30:16 1.60
-+++ lirc-0.8.3.orig/drivers/lirc_dev/lirc_dev.c 2008/09/27 08:16:15 1.61
-@@ -397,7 +397,7 @@
- DEV_LIRC "/%u", ir->p.minor);
- #endif
- (void) lirc_device_create(lirc_class, ir->p.dev,
-- MKDEV(IRCTL_DEV_MAJOR, ir->p.minor),
-+ MKDEV(IRCTL_DEV_MAJOR, ir->p.minor), NULL,
- "lirc%u", ir->p.minor);
-
- if (p->sample_rate || p->get_queue) {
diff --git a/abs/core/lirc_085/lirc.fdi b/abs/core/lirc_085/lirc.fdi
deleted file mode 100644
index 6f2443a..0000000
--- a/abs/core/lirc_085/lirc.fdi
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<deviceinfo version="0.2">
- <device>
- <!-- This rule prevents the Dvico dual digital4 rev 2
- remote input device from making your keyboard act wierd. -->
- <match key="info.product" contains_ncase="IR-receiver inside an USB DVB receiver">
- <merge key="info.ignore" type="bool">true</merge>
- </match>
- </device>
-</deviceinfo>
diff --git a/abs/core/lirc_085/lirc.install b/abs/core/lirc_085/lirc.install
deleted file mode 100644
index 53340e5..0000000
--- a/abs/core/lirc_085/lirc.install
+++ /dev/null
@@ -1,50 +0,0 @@
-# This is a default template for a post-install scriptlet. You can
-# remove any functions you don't need (and this header).
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- # updating module dependencies
- echo ">>> Updating module dependencies. Please wait ..."
- KERNEL_VERSION=2.6.28-LinHES
- depmod -v $KERNEL_VERSION > /dev/null 2>&1
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_upgrade() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_upgrade() {
- # updating module dependencies
- echo ">>> Updating module dependencies. Please wait ..."
- KERNEL_VERSION=2.6.28-LinHES
- depmod -v $KERNEL_VERSION > /dev/null 2>&1
- /bin/true
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- # updating module dependencies
- echo ">>> Updating module dependencies. Please wait ..."
- KERNEL_VERSION=2.6.28-LinHES
- depmod -v $KERNEL_VERSION > /dev/null 2>&1
- /bin/true
-}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core/lirc_085/lirc_atiusb.patch b/abs/core/lirc_085/lirc_atiusb.patch
deleted file mode 100644
index 2f0c61e..0000000
--- a/abs/core/lirc_085/lirc_atiusb.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ruaN lirc-0.8.4.orig/drivers/lirc_atiusb/lirc_atiusb.c lirc-0.8.4/drivers/lirc_atiusb/lirc_atiusb.c
---- lirc-0.8.4.orig/drivers/lirc_atiusb/lirc_atiusb.c 2008-05-19 08:10:35.000000000 +0000
-+++ lirc-0.8.4/drivers/lirc_atiusb/lirc_atiusb.c 2009-02-14 22:35:44.000000000 +0000
-@@ -192,8 +192,9 @@
- /* init strings */
- #define USB_OUTLEN 7
-
--static char init1[] = {0x01, 0x00, 0x20, 0x14};
--static char init2[] = {0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20};
-+static char init1[] = {0x80, 0x05, 0x1b, 0x15, 0x14, 0x20, 0x24, 0x15};
-+static char init2[] = {0x83, 0x03};
-+static char init3[] = {0x84, 0xd7, 0x020};
-
- struct in_endpt {
- /* inner link in list of endpoints for the remote specified by ir */
-@@ -1183,8 +1184,9 @@
- oep->buf, USB_OUTLEN, usb_remote_send,
- oep, oep->ep->bInterval);
-
-- send_packet(oep, 0x8004, init1);
-- send_packet(oep, 0x8007, init2);
-+ send_packet(oep, 0x8007, init1);
-+ send_packet(oep, 0x8002, init2);
-+ send_packet(oep, 0x8003, init3);
- }
- }
-
diff --git a/abs/core/lirc_085/lirc_mod_mce.patch b/abs/core/lirc_085/lirc_mod_mce.patch
deleted file mode 100644
index 1dc6644..0000000
--- a/abs/core/lirc_085/lirc_mod_mce.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-diff -Naru lirc_mod_mce/lirc_mod_mce.c lirc_mod_mce_new/lirc_mod_mce.c
---- lirc_mod_mce/lirc_mod_mce.c 2008-04-18 02:12:28.000000000 +0930
-+++ lirc_mod_mce_new/lirc_mod_mce.c 2009-11-22 18:45:24.000000000 +1030
-@@ -171,17 +171,76 @@
- #define VENDOR_TATUNG 0x1460
- #define VENDOR_GATEWAY 0x107b
- #define VENDOR_SHUTTLE 0x1308
-+#define VENDOR_PHILIPS 0x0471
-+#define VENDOR_SMK 0x0609
-+#define VENDOR_TATUNG 0x1460
-+#define VENDOR_GATEWAY 0x107b
-+#define VENDOR_SHUTTLE 0x1308
-+#define VENDOR_SHUTTLE2 0x051c
-+#define VENDOR_MITSUMI 0x03ee
-+#define VENDOR_TOPSEED 0x1784
-+#define VENDOR_RICAVISION 0x179d
-+#define VENDOR_ITRON 0x195d
-+#define VENDOR_FIC 0x1509
-+#define VENDOR_LG 0x043e
-+#define VENDOR_MICROSOFT 0x045e
-+#define VENDOR_FORMOSA 0x147a
-+#define VENDOR_FINTEK 0x1934
- #define VENDOR_PINNACLE 0x2304
-
--
- static struct usb_device_id usb_remote_table [] = {
-- { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, /* Philips eHome Infrared Transciever */
-- { USB_DEVICE(VENDOR_SMK, 0x031d) }, /* SMK/Toshiba G83C0004D410 */
-- { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, /* Tatung eHome Infrared Transceiver */
-- { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) }, /* Shuttle eHome Infrared Transceiver */
-- { USB_DEVICE(VENDOR_GATEWAY, 0x3009) }, /* Gateway eHome Infrared Transceiver */
-- { USB_DEVICE(VENDOR_PINNACLE, 0x0225) }, /* Pinnacle Remote USB RC6 */
-- { } /* Terminating entry */
-+ /* Philips eHome Infrared Transciever */
-+ { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
-+ /* Philips Infrared Transciever - HP branded */
-+ { USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
-+ /* Philips SRM5100 */
-+ { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
-+ /* SMK/Toshiba G83C0004D410 */
-+ { USB_DEVICE(VENDOR_SMK, 0x031d) },
-+ /* SMK eHome Infrared Transceiver (Sony VAIO) */
-+ { USB_DEVICE(VENDOR_SMK, 0x0322) },
-+ /* bundled with Hauppauge PVR-150 */
-+ { USB_DEVICE(VENDOR_SMK, 0x0334) },
-+ /* Tatung eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
-+ /* Shuttle eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
-+ /* Shuttle eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
-+ /* Gateway eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
-+ /* Mitsumi */
-+ { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
-+ /* Topseed eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
-+ /* Topseed HP eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
-+ /* Topseed eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
-+ /* Topseed eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
-+ /* Ricavision internal Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
-+ /* Itron ione Libra Q-11 */
-+ { USB_DEVICE(VENDOR_ITRON, 0x7002) },
-+ /* FIC eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_FIC, 0x9242) },
-+ /* LG eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_LG, 0x9803) },
-+ /* Microsoft MCE Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
-+ /* Formosa eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
-+ /* Formosa aim / Trust MCE Infrared Receiver */
-+ { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
-+ /* Formosa Industrial Computing / Beanbag Emulation Device */
-+ { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
-+ /* Fintek eHome Infrared Transceiver */
-+ { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
-+ /* Pinnacle Remote USB RC6 */
-+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
-+ /* Terminating entry */
-+ { }
- };
-
- static unsigned char usb_kbd_keycode[256] = {
-@@ -252,6 +311,8 @@
- struct semaphore lock;
- char name[NAME_BUFSIZE];
- char phys[NAME_BUFSIZE];
-+
-+ unsigned int carrier_freq;
- };
-
- /* init strings */
-@@ -889,6 +950,51 @@
- }
- }
-
-+/* Sets the send carrier frequency */
-+static int set_send_carrier(struct irctl *ir, int carrier)
-+{
-+ int clk = 10000000;
-+ int prescaler = 0, divisor = 0;
-+ unsigned char cmdbuf[] = { 0x9F, 0x06, 0x01, 0x80 };
-+
-+ /* Carrier is changed */
-+ if (ir->carrier_freq != carrier) {
-+
-+ if (carrier <= 0) {
-+ ir->carrier_freq = carrier;
-+ dprintk(DRIVER_NAME "[%d]: SET_CARRIER disabling "
-+ "carrier modulation\n", ir->devnum);
-+ request_packet_async(ir, ir->usb_ep_out,
-+ cmdbuf, sizeof(cmdbuf),
-+ PHILUSB_OUTBOUND);
-+ return carrier;
-+ }
-+
-+ for (prescaler = 0; prescaler < 4; ++prescaler) {
-+ divisor = (clk >> (2 * prescaler)) / carrier;
-+ if (divisor <= 0xFF) {
-+ ir->carrier_freq = carrier;
-+ cmdbuf[2] = prescaler;
-+ cmdbuf[3] = divisor;
-+ dprintk(DRIVER_NAME "[%d]: SET_CARRIER "
-+ "requesting %d Hz\n",
-+ ir->devnum, carrier);
-+
-+ /* Transmit new carrier to mce device */
-+ request_packet_async(ir, ir->usb_ep_out,
-+ cmdbuf, sizeof(cmdbuf),
-+ PHILUSB_OUTBOUND);
-+ return carrier;
-+ }
-+ }
-+
-+ return -EINVAL;
-+
-+ }
-+
-+ return carrier;
-+}
-+
- static int input_open(struct input_dev *id)
- {
- return 0;
-@@ -945,6 +1051,18 @@
- if(lvalue!=(LIRC_MODE_PULSE&LIRC_CAN_SEND_MASK)) return -EINVAL;
- break;
-
-+ case LIRC_SET_SEND_CARRIER:
-+ /* Retrieve lirc_plugin data for the device */
-+ ir=lirc_get_pdata(filep);
-+ if (!ir && !ir->usb_ep_out) return -EFAULT;
-+
-+ result = get_user(ivalue, (unsigned int *) arg);
-+ if (result)
-+ return result;
-+
-+ set_send_carrier(ir, ivalue);
-+ break;
-+
- default:
- return -ENOIOCTLCMD;
- }
-@@ -1047,7 +1165,8 @@
- plugin->minor = -1;
- plugin->features = LIRC_CAN_SEND_PULSE |
- LIRC_CAN_SET_TRANSMITTER_MASK |
-- LIRC_CAN_REC_MODE2;
-+ LIRC_CAN_REC_MODE2 |
-+ LIRC_CAN_SET_SEND_CARRIER;
- plugin->data = ir;
- plugin->rbuf = rbuf;
- plugin->set_use_inc = &set_use_inc;
-@@ -1108,7 +1227,7 @@
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- usb_to_input_id(dev, &input_dev->id);
-- input_dev->cdev.dev = &dev->dev;
-+ input_dev->dev.parent = &dev->dev;
- input_dev->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
- input_dev->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
- input_dev->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X);