summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xabs/core-testing/LinHES-config-svn/PKGBUILD2
-rwxr-xr-xabs/core-testing/LinHES-config-svn/install_db_chroot.sh136
-rwxr-xr-xabs/core-testing/LinHES-config-svn/install_functions.sh54
-rwxr-xr-xabs/core-testing/LinHES-config-svn/install_proxy.sh4
-rwxr-xr-xabs/core-testing/LinHES-config/install_db_chroot.sh136
-rwxr-xr-xabs/core-testing/LinHES-config/install_functions.sh46
-rwxr-xr-xabs/core-testing/LinHES-config/install_proxy.sh800
-rw-r--r--abs/core-testing/LinHES-config/ir_config.sh42
-rw-r--r--abs/core-testing/fbsplash/PKGBUILD2
-rw-r--r--abs/core-testing/fbsplash/darch.tar.bz2bin0 -> 1572821 bytes
-rw-r--r--abs/core-testing/fbsplash/fbsplash.inithooks10
-rw-r--r--abs/core-testing/mythtv/stable/mythweb/PKGBUILD9
-rw-r--r--abs/core-testing/mythtv/stable/mythweb/patch/mythweb.pl.diff23
-rw-r--r--abs/core-testing/tweaker/PKGBUILD2
-rwxr-xr-xabs/core-testing/tweaker/bin/twk_cpu.pl4
-rwxr-xr-xabs/core-testing/tweaker/bin/twk_general.pl9
-rwxr-xr-xabs/core-testing/tweaker/bin/twk_keymap.sh2
-rwxr-xr-xabs/core/live-installer/PKGBUILD2
-rwxr-xr-xabs/core/live-installer/install_proxy.sh4
-rwxr-xr-xabs/mv-core/MythVantage-config/PKGBUILD2
-rwxr-xr-xabs/mv-core/MythVantage-config/install_proxy.sh4
21 files changed, 967 insertions, 326 deletions
diff --git a/abs/core-testing/LinHES-config-svn/PKGBUILD b/abs/core-testing/LinHES-config-svn/PKGBUILD
index 2927a6e..32645a2 100755
--- a/abs/core-testing/LinHES-config-svn/PKGBUILD
+++ b/abs/core-testing/LinHES-config-svn/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=LinHES-config-svn
pkgver=1.0
-pkgrel=294
+pkgrel=299
conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev )
pkgdesc="Install and configure your system"
depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan system-templates )
diff --git a/abs/core-testing/LinHES-config-svn/install_db_chroot.sh b/abs/core-testing/LinHES-config-svn/install_db_chroot.sh
index 1a0131e..808dbb9 100755
--- a/abs/core-testing/LinHES-config-svn/install_db_chroot.sh
+++ b/abs/core-testing/LinHES-config-svn/install_db_chroot.sh
@@ -6,58 +6,112 @@
myhost=$hostname
hostname $myhost
echo $myhost > /etc/hostname
-echo "install_db_chroot hostname is $hostname"
+echo "$0 hostname is $hostname"
. $MV_ROOT/bin/install_functions.sh
#myhost=`cat /etc/hostname`
-#mount -t proc none /proc
-pacman --noconfirm -Sf mysql
-/etc/rc.d/mysqld
-
-status=1
-mysqlstatus=1
-while [ ! $status = 0 ]
-do
- /etc/rc.d/mysqld stop
- sleep 1
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql -e "show databases;"
- showstatus=$?
- if [ $showstatus = 0 ]
- then
- pacman --noconfirm -R mythdb-initial
- pacman --noconfirm -S mythdb-initial
- $MV_ROOT/bin/restore_default_settings.sh -c load
- DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
- $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
-
- update_db_settings HostServiceMythWEB "1"
- echo 'UseMythWEB="1"' >> /etc/systemconfig
-
- #update database to allow user jobs on this host.
- $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
- $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- if [ -d /data/srv/mysql/mythconverg ]
- #if [ -d /var/lib/mysql/mythconverg ]
- then
+# Before this script is called, the mysqld that facilitated the installation is killed.
+# We need to make sure to stop and start the mysqld that will be used post-install so
+# that the database can be initialized.
+
+/etc/rc.d/mysqld stop
+killall -9 mysqld
+/etc/rc.d/mysqld start
+sleep 1
+
+# Put a limit on how many times we try to (re-)start MySQL
+success_test() {
+ # parameter: number of tries to start mysqld so far
+ PID=`pidof -o %PPID /usr/sbin/mysqld`
+ if [ -z "$PID" ]; then # mysqld isn't running
+ if [ $1 -gt 3 ]; then
+ echo "ERROR: Failed to start MySQL server in $1 attempts."
+ sleep 5
+ exit 1
+ else
+ echo "Tried $1 time(s) to start MySQL server."
+ return 1
+ fi
+ else # mysqld is running
+ return 0
+ fi
+ # should never get here
+ return 1
+}
+
+mysqld_tries=0
+# See if MySQL server is running; try several ways to start it if it's not.
+while true; do
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server is running"
+ break
+ else
+ echo "MySQL server is not running. Trying to start it."
+ # Maybe it just needs to be started
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqld_tries=$((mysqld_tries + 1))
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server has been started"
+ break
+ else
+ echo "MySQL server may not be installed. Trying to install it."
+ # Maybe it's not installed; try (re-)installing it and starting it
+ sleep 1
+ pacman --noconfirm -Sf mysql
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqld_tries=$((mysqld_tries + 1))
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server has been installed and started"
+ break
+ else
+ echo "MySQL server would not start, even after (re-)installing it."
+ fi
+ fi
+ fi
+done
+
+# At this point, MySQL server should be up and running
+
+while true; do
+ mysql -e "show databases;"
+
+ if [ $? -eq 0 ]; then
+ pacman --noconfirm -R mythdb-initial
+ pacman --noconfirm -S mythdb-initial
+ $MV_ROOT/bin/restore_default_settings.sh -c load
+ DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
+ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
+
+ update_db_settings HostServiceMythWEB "1"
+ echo 'UseMythWEB="1"' >> /etc/systemconfig
+
+ #update database to allow user jobs on this host.
+ $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
+ $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ #if [ -d /var/lib/mysql/mythconverg ]
+ if [ -d /data/srv/mysql/mythconverg ]; then
# pacman --noconfirm -R webcalendar
# pacman --noconfirm --nodeps -S webcalendar
- status=0
- fi
+ break
+ else
+ echo "Failed to create mythconverg database. Will re-try."
+ sleep 1
+ fi
# if [ $SystemType = "Master_backend" ]
# then
# $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
# fi
- fi
+ else
+ echo "Failed to look for databases. Will re-try."
+ sleep 1
fi
done
/etc/rc.d/mysqld stop
#umount /proc
-
-
-
diff --git a/abs/core-testing/LinHES-config-svn/install_functions.sh b/abs/core-testing/LinHES-config-svn/install_functions.sh
index ddade6d..4f6f7ed 100755
--- a/abs/core-testing/LinHES-config-svn/install_functions.sh
+++ b/abs/core-testing/LinHES-config-svn/install_functions.sh
@@ -38,7 +38,7 @@ update_db_settings Theme "$pick"
function splash_setup (){
echo $CMDLINE | grep -q splash=silent
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
update_db_settings Hostbootsplash 1
else
@@ -61,7 +61,7 @@ function setupremote {
update_db_settings HostRemoteType "$Remotetype"
#special case for special remote
echo "Starting with support for $Remotetype"
- if [ x$Remotetype = "xdvico" ]
+ if [ "$Remotetype" == "dvico" ]
then
/usr/sbin/lircd -d /dev/usb/hiddev0
else
@@ -79,7 +79,7 @@ echo "Scanning for Hauppauge receiver"
for hpgid in `lspci -nm -d4444: |cut -d" " -f6- |tr -d '"'|tr " " :`
do
line=`grep $hpgid $TEMPLATES/remotes/i2c.id`
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
modprobe lirc_i2c
FoundReceiverType=`echo "$line"|cut -d"|" -f2`
@@ -102,7 +102,7 @@ while read line
do
USBID=`echo "$line"|cut -d"|" -f1`
lsusb -d "$USBID" > /dev/null 2>/dev/null
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
Remotetype=`echo "$line"|cut -d"|" -f2`
echo "Found $Remotetype"
@@ -111,7 +111,7 @@ do
break
fi
done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-if [ $found_remote = 1 ]
+if [ $found_remote -eq 1 ]
then
scan_for_hpg_receiver
fi
@@ -125,7 +125,7 @@ fi
function rest_of_network () {
#netmask
echo $CMDLINE | grep -q netmask
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*netmask=}
NETMASK=${TEMPVAR%% *}
@@ -139,7 +139,7 @@ function rest_of_network () {
fi
#gateway
echo $CMDLINE | grep -q gateway
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*gateway=}
GATEWAY=${TEMPVAR%% *}
@@ -152,7 +152,7 @@ function rest_of_network () {
#dns
echo $CMDLINE | grep -q dns
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*dns=}
DNS=${TEMPVAR%% *}
@@ -165,7 +165,7 @@ function rest_of_network () {
function init_network {
echo $CMDLINE |grep -q netdev
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*netdev=}
MYTHDEFAULT=${TEMPVAR%% *}
@@ -176,7 +176,7 @@ function init_network {
echo $CMDLINE | grep -q ip
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
update_db_settings HostDefaulteth0 0
update_db_settings HostDefault${MYTHDEFAULT} 1
@@ -187,7 +187,7 @@ function init_network {
TEMPVAR=${CMDLINE#*ip=}
IP=${TEMPVAR%% *}
- if [ x$IP = xdhcp ]
+ if [ "$IP" == "dhcp" ]
then
/sbin/dhcpcd $MYTHDEFAULT
update_db_settings HostUseDHCP${MYTHDEFAULT} 0
@@ -202,11 +202,11 @@ function init_network {
function init_remote {
echo $CMDLINE | grep -q remoteport
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*remoteport=}
REMOTEPORT=${TEMPVAR%% *}
- if [ x"$ReceiverType" = "xSerial" ]
+ if [ "$ReceiverType" == "Serial" ]
then
if [ -e /dev/$REMOTEPORT ]
then
@@ -220,7 +220,7 @@ function init_remote {
fi
echo $CMDLINE | grep -q remote
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*remote=}
Remotetype=${TEMPVAR%% *}
@@ -239,7 +239,7 @@ ROOT=$1
DATA=$2
SWAP=$3
-if [ ! x$SWAP = xNO ]
+if [ "$SWAP" != "NO" ]
then
SWAPLINE=",$SWAP,S"
MKSWAPCMD="mkswap /dev/${disk}2"
@@ -248,7 +248,7 @@ if [ ! x$SWAP = xNO ]
MKSWAPCMD=""
fi
-if [ x$DATA = xALL ]
+if [ "$DATA" == "ALL" ]
then
DATALINE=",,,"
EXTRALINE=""
@@ -315,7 +315,7 @@ unmount_it () {
copy_it () {
- if [ x$1 = xALL ]
+ if [ "$1" == "ALL" ]
then
echo "Transferring system"
unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
@@ -403,7 +403,7 @@ function find_uuid() {
get_grub_map() {
- rm /tmp/dev.map
+ [ -e /tmp/dev.map ] && rm /tmp/dev.map
/sbin/grub --no-floppy --device-map /tmp/dev.map <<EOF
quit
EOF
@@ -422,17 +422,17 @@ mapdev() {
fi
for dev in $devs
do
- if [ "(" = $(echo $dev | cut -b1) ]; then
+ if [ "(" == $(echo $dev | cut -b1) ]; then
grubdevice="$dev"
else
- if [ "$dev" = "$linuxdevice" ]; then
+ if [ "$dev" == "$linuxdevice" ]; then
device_found=1
break
fi
fi
done
- if [ "$device_found" = "1" ]; then
- if [ "$partition_flag" = "0" ]; then
+ if [ "$device_found" == "1" ]; then
+ if [ "$partition_flag" == "0" ]; then
echo "$grubdevice"
else
grubdevice_stringlen=${#grubdevice}
@@ -461,7 +461,7 @@ dogrub() {
#/usr/sbin/xfs_freeze -f /$mountpoint > /dev/null 2>&1
echo "freezing xfs fs"
/usr/sbin/xfs_freeze -f /$mountpoint
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
sleep 40
echo "unfreezing xfs"
@@ -531,7 +531,7 @@ case $1 in
create_fstab
fi
#was 5
- if [ x$3 = xUPGRADE ]
+ if [ "$3" == "UPGRADE" ]
then
if [ ! -f /tmp/etc/KnoppMyth-version ]
then
@@ -558,11 +558,11 @@ case $1 in
SWAPUUID=$FOUNDUUID
FOUNDUUID=""
- if [ x$4 = x ]
+ if [ "$4" == "" ]
then
#upgrade
find_uuid ${2}3
- elif [ x$5 = xFULL_INSTALL ]
+ elif [ "$5" == "FULL_INSTALL" ]
then
#install
find_uuid ${2}3
@@ -585,7 +585,7 @@ case $1 in
if [ -f /tmp/etc/fstab ]
then
grep -q /dev/vg /tmp/etc/fstab
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
diff --git a/abs/core-testing/LinHES-config-svn/install_proxy.sh b/abs/core-testing/LinHES-config-svn/install_proxy.sh
index 3f626a1..32d01d7 100755
--- a/abs/core-testing/LinHES-config-svn/install_proxy.sh
+++ b/abs/core-testing/LinHES-config-svn/install_proxy.sh
@@ -174,7 +174,7 @@ full_install () {
sleep 1
$run partition_it $disk $rootsize $datasize $swapsize
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs $datafs
@@ -294,7 +294,7 @@ function upgrade () {
if [ ! x$rootfs = "xDo_not_format" ]
then
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs NO
diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh
index 1a0131e..808dbb9 100755
--- a/abs/core-testing/LinHES-config/install_db_chroot.sh
+++ b/abs/core-testing/LinHES-config/install_db_chroot.sh
@@ -6,58 +6,112 @@
myhost=$hostname
hostname $myhost
echo $myhost > /etc/hostname
-echo "install_db_chroot hostname is $hostname"
+echo "$0 hostname is $hostname"
. $MV_ROOT/bin/install_functions.sh
#myhost=`cat /etc/hostname`
-#mount -t proc none /proc
-pacman --noconfirm -Sf mysql
-/etc/rc.d/mysqld
-
-status=1
-mysqlstatus=1
-while [ ! $status = 0 ]
-do
- /etc/rc.d/mysqld stop
- sleep 1
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql -e "show databases;"
- showstatus=$?
- if [ $showstatus = 0 ]
- then
- pacman --noconfirm -R mythdb-initial
- pacman --noconfirm -S mythdb-initial
- $MV_ROOT/bin/restore_default_settings.sh -c load
- DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
- $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
-
- update_db_settings HostServiceMythWEB "1"
- echo 'UseMythWEB="1"' >> /etc/systemconfig
-
- #update database to allow user jobs on this host.
- $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
- $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- if [ -d /data/srv/mysql/mythconverg ]
- #if [ -d /var/lib/mysql/mythconverg ]
- then
+# Before this script is called, the mysqld that facilitated the installation is killed.
+# We need to make sure to stop and start the mysqld that will be used post-install so
+# that the database can be initialized.
+
+/etc/rc.d/mysqld stop
+killall -9 mysqld
+/etc/rc.d/mysqld start
+sleep 1
+
+# Put a limit on how many times we try to (re-)start MySQL
+success_test() {
+ # parameter: number of tries to start mysqld so far
+ PID=`pidof -o %PPID /usr/sbin/mysqld`
+ if [ -z "$PID" ]; then # mysqld isn't running
+ if [ $1 -gt 3 ]; then
+ echo "ERROR: Failed to start MySQL server in $1 attempts."
+ sleep 5
+ exit 1
+ else
+ echo "Tried $1 time(s) to start MySQL server."
+ return 1
+ fi
+ else # mysqld is running
+ return 0
+ fi
+ # should never get here
+ return 1
+}
+
+mysqld_tries=0
+# See if MySQL server is running; try several ways to start it if it's not.
+while true; do
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server is running"
+ break
+ else
+ echo "MySQL server is not running. Trying to start it."
+ # Maybe it just needs to be started
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqld_tries=$((mysqld_tries + 1))
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server has been started"
+ break
+ else
+ echo "MySQL server may not be installed. Trying to install it."
+ # Maybe it's not installed; try (re-)installing it and starting it
+ sleep 1
+ pacman --noconfirm -Sf mysql
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqld_tries=$((mysqld_tries + 1))
+ success_test $mysqld_tries
+ if [ $? -eq 0 ]; then
+ echo "MySQL server has been installed and started"
+ break
+ else
+ echo "MySQL server would not start, even after (re-)installing it."
+ fi
+ fi
+ fi
+done
+
+# At this point, MySQL server should be up and running
+
+while true; do
+ mysql -e "show databases;"
+
+ if [ $? -eq 0 ]; then
+ pacman --noconfirm -R mythdb-initial
+ pacman --noconfirm -S mythdb-initial
+ $MV_ROOT/bin/restore_default_settings.sh -c load
+ DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
+ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
+
+ update_db_settings HostServiceMythWEB "1"
+ echo 'UseMythWEB="1"' >> /etc/systemconfig
+
+ #update database to allow user jobs on this host.
+ $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
+ $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ #if [ -d /var/lib/mysql/mythconverg ]
+ if [ -d /data/srv/mysql/mythconverg ]; then
# pacman --noconfirm -R webcalendar
# pacman --noconfirm --nodeps -S webcalendar
- status=0
- fi
+ break
+ else
+ echo "Failed to create mythconverg database. Will re-try."
+ sleep 1
+ fi
# if [ $SystemType = "Master_backend" ]
# then
# $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
# fi
- fi
+ else
+ echo "Failed to look for databases. Will re-try."
+ sleep 1
fi
done
/etc/rc.d/mysqld stop
#umount /proc
-
-
-
diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh
index ce9a057..9f38384 100755
--- a/abs/core-testing/LinHES-config/install_functions.sh
+++ b/abs/core-testing/LinHES-config/install_functions.sh
@@ -38,7 +38,7 @@ update_db_settings Theme "$pick"
function parse_cmdline_2_db(){
echo $CMDLINE | grep -q displayres
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*displayres=}
update_db_settings HostXres $TEMPVAR
@@ -49,7 +49,7 @@ function parse_cmdline_2_db(){
function bootsplash_setup (){
echo $CMDLINE | grep -q splash=silent
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
update_db_settings Hostbootsplash 1
else
@@ -72,7 +72,7 @@ function setupremote {
update_db_settings HostRemoteType "$Remotetype"
#special case for special remote
printhl "Starting with support for $Remotetype"
- if [ x$Remotetype = "xdvico" ]
+ if [ "$Remotetype" == "dvico" ]
then
/usr/sbin/lircd -d /dev/usb/hiddev0
else
@@ -90,7 +90,7 @@ printhl " Scanning for Hauppauge receiver"
for hpgid in `lspci -nm -d4444: |cut -d" " -f6- |tr -d '"'|tr " " :`
do
line=`grep $hpgid $TEMPLATES/remotes/i2c.id`
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
modprobe lirc_i2c
FoundReceiverType=`echo "$line"|cut -d"|" -f2`
@@ -131,7 +131,7 @@ while read line
do
USBID=`echo "$line"|cut -d"|" -f1`
lsusb -d "$USBID" > /dev/null 2>/dev/null
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
Remotetype=`echo "$line"|cut -d"|" -f2`
printhl "Found $Remotetype"
@@ -140,7 +140,7 @@ do
break
fi
done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-if [ $found_remote = 1 ]
+if [ $found_remote -eq 1 ]
then
scan_for_hpg_receiver
fi
@@ -154,7 +154,7 @@ fi
function rest_of_network () {
#netmask
echo $CMDLINE | grep -q netmask
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*netmask=}
NETMASK=${TEMPVAR%% *}
@@ -168,7 +168,7 @@ function rest_of_network () {
fi
#gateway
echo $CMDLINE | grep -q gateway
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*gateway=}
GATEWAY=${TEMPVAR%% *}
@@ -180,7 +180,7 @@ function rest_of_network () {
#dns
echo $CMDLINE | grep -q dns
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*dns=}
DNS=${TEMPVAR%% *}
@@ -193,7 +193,7 @@ function rest_of_network () {
function init_network {
echo $CMDLINE |grep -q netdev
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*netdev=}
MYTHDEFAULT=${TEMPVAR%% *}
@@ -204,7 +204,7 @@ function init_network {
echo $CMDLINE | grep -q ip
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
update_db_settings HostDefaulteth0 0
update_db_settings HostDefault${MYTHDEFAULT} 1
@@ -215,7 +215,7 @@ function init_network {
TEMPVAR=${CMDLINE#*ip=}
IP=${TEMPVAR%% *}
- if [ x$IP = xdhcp ]
+ if [ "$IP" == "dhcp" ]
then
/sbin/dhcpcd $MYTHDEFAULT
update_db_settings HostUseDHCP${MYTHDEFAULT} 0
@@ -230,7 +230,7 @@ function init_network {
function init_remote {
echo $CMDLINE | grep -q remoteport
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*remoteport=}
REMOTEPORT=${TEMPVAR%% *}
@@ -248,7 +248,7 @@ function init_remote {
fi
echo $CMDLINE | grep -q remote
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
TEMPVAR=${CMDLINE#*remote=}
Remotetype=${TEMPVAR%% *}
@@ -267,7 +267,7 @@ ROOT=$1
DATA=$2
SWAP=$3
-if [ ! x$SWAP = xNO ]
+if [ ! "$SWAP" == "NO" ]
then
SWAPLINE=",$SWAP,S"
MKSWAPCMD="mkswap /dev/${disk}2"
@@ -276,7 +276,7 @@ if [ ! x$SWAP = xNO ]
MKSWAPCMD=""
fi
-if [ x$DATA = xALL ]
+if [ "$DATA" == "ALL" ]
then
DATALINE=",,,"
EXTRALINE=""
@@ -343,7 +343,7 @@ unmount_it () {
copy_it () {
- if [ x$1 = xALL ]
+ if [ "$1" == "ALL" ]
then
echo "Transferring system"
unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
@@ -431,7 +431,7 @@ function find_uuid() {
get_grub_map() {
- rm /tmp/dev.map
+ [ -e /tmp/dev.map ] && rm /tmp/dev.map
/sbin/grub --no-floppy --device-map /tmp/dev.map <<EOF
quit
EOF
@@ -489,7 +489,7 @@ dogrub() {
#/usr/sbin/xfs_freeze -f /$mountpoint > /dev/null 2>&1
echo "freezing xfs fs"
/usr/sbin/xfs_freeze -f /$mountpoint
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
sleep 40
echo "unfreezing xfs"
@@ -559,7 +559,7 @@ case $1 in
create_fstab
fi
#was 5
- if [ x$3 = xUPGRADE ]
+ if [ "$3" == "UPGRADE" ]
then
if [ ! -f /tmp/etc/KnoppMyth-version ]
then
@@ -586,11 +586,11 @@ case $1 in
SWAPUUID=$FOUNDUUID
FOUNDUUID=""
- if [ x$4 = x ]
+ if [ "$4" == "" ]
then
#upgrade
find_uuid ${2}3
- elif [ x$5 = xFULL_INSTALL ]
+ elif [ "$5" == "FULL_INSTALL" ]
then
#install
find_uuid ${2}3
@@ -613,7 +613,7 @@ case $1 in
if [ -f /tmp/etc/fstab ]
then
grep -q /dev/vg /tmp/etc/fstab
- if [ $? = 0 ]
+ if [ $? -eq 0 ]
then
grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh
index b9d6b67..4d158e7 100755
--- a/abs/core-testing/LinHES-config/install_proxy.sh
+++ b/abs/core-testing/LinHES-config/install_proxy.sh
@@ -17,155 +17,685 @@ run=$MV_ROOT/bin/install_functions.sh
CMDLINE=$(cat /proc/cmdline)
BACKUPFILE="/myth/backup/mythconverg.sql.gz"
+#TEMPNET="Hostip"$default_interface
+#eval MYTHIP=\$${TEMPNET}
+function create_chroot_mnt_points() {
+
+ echo "Creating directory for media in chroot"
+ mkdir -p $mountpoint/media/cdrom
+ mkdir -p $mountpoint/media/dvd
+ mkdir -p $mountpoint/mnt
+
+}
+function cp_and_log () {
+ ls $1 >/dev/null 2>&1
+ status=$?
+ if [ $status = 0 ]
+ then
+ echo "copying $1 to $2"
+ cp -rfp $1 $2
+ else
+ echo "$1 is not present, skipping..."
+ fi
+
+}
+
+function mdadm_find () {
+
+ PREFIX=$1
+ if [ -e $PREFIX/etc/KnoppMyth-version ]
+ then
+ MDADM_CONF="/etc/mdadm/mdadm.conf"
+ else
+ MDADM_CONF="/etc/mdadm.conf"
+ fi
+ echo "Using $MDADM_CONF"
+}
progress () {
- mypercent=`echo "$1" | cut -d. -f1`
- if [ x$mypercent = x ]
+mypercent=`echo "$1" | cut -d. -f1`
+if [ x$mypercent = x ]
+then
+echo "" > /tmp/.install_percent
+else
+echo "${mypercent}% complete" > /tmp/.install_percent
+fi
+
+
+}
+
+function apply_new_auth () {
+#check if file is present
+ if [ -f /root/myth_user_call.out ]
+ then
+ #read in file, running each command in chroot
+ exec 4</root/myth_user_call.out
+ while read LINE <&4
+ do
+ if [ ! x"$LINE" = x ]
+ then
+ #run commands in chroot
+ chroot "$mountpoint" $MV_ROOT/bin/myth_user_call -i $LINE > /tmp/user_auth.update
+ fi
+ done
+ rm -f /root/myth_user_call.out
+ else
+ echo "No new password changes to apply"
+ fi
+}
+
+
+function backup_sql_check {
+ if [ -f ${mountpoint}${BACKUPFILE} ]
+ then
+ echo "found ${mountpoint}${BACKUPFILE} "
+ rc=0
+ else
+ echo "did not find ${mountpoint}${BACKUPFILE} "
+ rc=1
+ fi
+ return $rc
+}
+
+function mdadm_assemble_all {
+
+ mdadm_find /tmp
+ mdadm --assemble --scan -c /tmp${MDADM_CONF}
+ MDLIST=`grep ARRAY /tmp${MDADM_CONF}|tr -s [:space:]|cut -d" " -f2`
+ for array in $MDLIST
+ do
+ echo "assembling array $array"
+ mdadm --assemble -c /tmp${MDADM_CONF} $array
+ sleep 2
+ fsck -p $array
+ done
+
+}
+
+function upgrade_mount_search {
+
+ MYTH_P=`cat /tmp/etc/fstab |grep -E /myth[[:space:]] | awk ' {print $1 '} `
+ umount $mountpoint/myth
+
+ #should probably just mdadm all the time
+ echo $MYTH_P |grep -q \/md.
+ if [ $? = 0 ]
then
- echo "" > /tmp/.install_percent
+ mdadm_assemble_all
+ fi
+
+ echo $MYTH_P |grep -q UUID
+ if [ $? = 0 ]
+ then
+ MUUID=`echo $MYTH_P|cut -d= -f2|tr -d \"`
+ echo blkid $MUUID
+ blkid -t UUID=$MUUID
+ if [ ! $? = 0 ]
+ then
+ echo "couldn't find $MUUID, starting md support"
+ mdadm_assemble_all
+ fi
+ mount -U $MUUID $mountpoint/myth
+ echo mount -U $MUUID $mountpoint/myth
+ MYTHMOUNT=`blkid -t UUID=$MUUID|cut -d: -f1`
+ MYTHMOUNT=`basename $MYTHMOUNT`
+ echo "MYTHMOUNT is $MYTHMOUNT"
else
- echo "${mypercent}% complete" > /tmp/.install_percent
+ mount $MYTH_P $mountpoint/myth
+ echo mount $MYTH_P $mountpoint/myth
+ MYTHMOUNT=`basename $MYTH_P`
+ echo "MYTHMOUNT is $MYTHMOUNT"
+ fi
+ sleep 2
+ backup_sql_check
+ if [ $? = 1 ]
+ then
+ mkdir -p /new_boot/root/backup
+ if [ ! -e /tmp/mythconverg.sql.gz ]
+ then
+ echo "Couldn't find ANY database to restore, upgrade will continue but a new database will be installed."
+ else
+ cp_and_log /tmp/mythconverg.sql.gz /new_boot/root/backup/mythconverg.sql.gz
+ BACKUPFILE="/root/backup/mythconverg.sql.gz"
+ echo "setting BACKUPFILE to $BACKUPFILE"
+ fi
fi
+ return 0
}
+full_install () {
+ if [ -f /tmp/.this_is_upgrade ]
+ then
+ rm /tmp/.this_is_upgrade
+ fi
+ echo "Partitioning $disk" > /tmp/.install_state
+ progress 1
+ sleep 1
+ $run partition_it $disk $rootsize $datasize $swapsize
+
+ echo "Formatting $disk" > /tmp/.install_state
+ progress 2
+ sleep 1
+ $run format_it $disk $rootfs $datafs
+
+ echo "Preparing $disk" > /tmp/.install_state
+ progress 3
+ sleep 1
+ $run mount_it $disk
+
+ startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+
+ echo "STARTSIZE=$startsize">/tmp/.startsize.io
+ echo "Creating $hostname" > /tmp/.install_state
+
+ sleep 1
+ $run copy_it $disk ALL
+ rm $mountpoint/etc/fstab
+ $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
+ echo "Configuring system" > /tmp/.install_state
+ progress 100
+ #progress 99
+ sleep 1
+ $run grub_it $disk
+
+
+ #echo "Configuring system" > /tmp/.install_state
+ #progress 100
+ sleep 1
+ cp_and_log /etc/systemconfig "$mountpoint"/etc
+ cp_and_log /root/xorg.conf.install "$mountpoint"/etc/X11/xorg.conf.install
+ #run save syssettings to save settings, then copy to new mountpoint
+ $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
+ SE=$TEMPLATES/settings/syssettings
+ mkdir -p ${mountpoint}$SE
+ #cp -rp $SE/* ${mountpoint}$SE/
+ cp_and_log "$SE/*" "${mountpoint}$SE/"
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chown -R mythtv:mythtv ${mountpoint}$SE
+
+ chmod -R 775 ${mountpoint}$SE
+ chmod 775 "$mountpoint"/etc/systemconfig
+ mkdir -p "$mountpoint"/var/log/mythtv
+ chown mythtv "$mountpoint"/var/log/mythtv
+ #copy over any updates that might have occured
+ #cp -rp $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
+ cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/
+ chmod -R 755 ${mountpoint}/root
+ create_chroot_mnt_points
+ cp_and_log /etc/mtab "$mountpoint"/etc/mtab
+ # cp_and_log /etc/hostname "$mountpoint"/etc/hostname
+ apply_new_auth
+
+
+ if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
+ then
+ #installing DB to local machine
+ #turn off old live database, so the chroot one can start
+ echo "---------------------CHROOT INSTALLDB-------------------------"
+ /etc/rc.d/mysqld stop
+ mount --bind /dev "$mountpoint/dev"
+ mount --bind /proc "$mountpoint/proc"
+ mount -t sysfs none $mountpoint/sys
+ chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" 2>&1 |tee /tmp/chrootdb.out
+ #chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh"
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install
+ echo "stopping mysql in chroot"
+ chroot "$mountpoint" /etc/rc.d/mysqld stop
+ kill_dhcp_chroot
+ sleep 2
+ lsof |grep new_boot
+ umount -l "$mountpoint/dev"
+ umount -l "$mountpoint/proc"
+ umount -l "$mountpoint/sys"
+
+ echo "---------------------END CHROOT INSTALLDB-------------------------"
+ /etc/rc.d/mysqld start
+ else
+ #update remotedb with this host settings
+ mount --bind /dev "$mountpoint/dev"
+ mount --bind /proc "$mountpoint/proc"
+ mount -t sysfs none $mountpoint/sys
+ chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ if [ ! $? = 0 ]
+ then
+ touch $mountpoint/tmp/.dbsysfailed
+ chmod 777 $mountpoint/tmp/.dbsysfailed
+ else
+ #Run second time
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ umount -l "$mountpoint/dev"
+ umount -l "$mountpoint/proc"
+ umount -l "$mountpoint/sys"
+ fi
+ fi
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,user
+ touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure
+
+ echo "Done" > /tmp/.install_state
+ cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/
+ $run umount_it $disk
+
+}
+
+function createsquashlist(){
+if [ -f $1 ]
+then
+ rm -f
+$1
+fi
+for i in bin boot etc home lib opt root sbin usr var data
+do
+echo $i >> $1
+done
+
+
+}
+
+
+
+
+function upgrade () {
+ touch /tmp/.this_is_upgrade
+
+ if [ ! x$rootfs = "xDo_not_format" ]
+ then
+ echo "Formatting
+ $disk" > /tmp/.install_state
+ progress 2
+ sleep 1
+ $run format_it $disk $rootfs NO
+ fi
+ echo "Preparing $disk" > /tmp/.install_state
+ progress 3
+ sleep 1
+ $run mount_it $disk
+ startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+ echo "STARTSIZE=$startsize">/tmp/.startsize.io
+ echo "Upgrading $hostname" > /tmp/.install_state
+ sleep 1
+ cp_and_log /tmp/etc /new_boot/etc.old
+ cp_and_log /tmp/oss /new_boot/var/lib/oss.old
+
+
+ SQUASHLIST="/tmp/.squashlist"
+ createsquashlist $SQUASHLIST
+ $run copy_it $disk $SQUASHLIST
+ #copy back ssh keys
+
+# cp_and_log -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
+ cp_and_log "/new_boot/etc.old/ssh/*.pub" /new_boot/etc/ssh/
+ cp_and_log "/new_boot/etc.old/ssh/*.key" /new_boot/etc/ssh/
+ cp_and_log "/new_boot/etc.old/ssh/*key" /new_boot/etc/ssh/
+ mdadm_find /tmp
+ cp_and_log /tmp${MDADM_CONF} /new_boot/etc
+ #cp_and_log /new_boot/etc.old/mdadm/mdadm.conf /new_boot/etc/
+ cp_and_log /new_boot/etc.old/asound.state /new_boot/etc/
+ if [ ! -f /tmp/etc/KnoppMyth-version ]
+ then
+ #passwd/shadow/group
+ cp_and_log /new_boot/etc.old/passwd /new_boot/etc/
+ cp_and_log /new_boot/etc.old/shadow /new_boot/etc/
+ cp_and_log /new_boot/etc.old/group /new_boot/etc/
+ fi
+ mkdir -p "$mountpoint"/var/log/mythtv
+ chown mythtv "$mountpoint"/var/log/mythtv
+ if [ x$rootfs = "xDo_not_format" ]
+ then
+ rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '`
+ fi
+ #this is here to copy in the systemconfig file as soon as possible.
+ cp_and_log /etc/systemconfig "$mountpoint"/etc/systemconfig
+ echo "Configuring system" > /tmp/.install_state
+ progress 100
+ backup_sql_check
+ if [ $? = 1 ]
+ then
+ upgrade_mount_search
+ fi
+ echo $run fstab_fix_it $disk UPGRADE $MYTHMOUNT
+ $run fstab_fix_it $disk UPGRADE $MYTHMOUNT
+ create_chroot_mnt_points
+
+ #echo "Writing boot sector" > /tmp/.install_state
+ #progress 99
+ sleep 1
+ $run grub_it $disk
+ #echo "Configuring system" > /tmp/.install_state
+ #progress 100
+ sleep 1
+ cp_and_log /etc/mtab "$mountpoint"/etc/mtab
+ cp_and_log /etc/systemconfig "$mountpoint"/etc
+ cp_and_log /root/xorg.conf.install "$mountpoint"/etc/X11/xorg.conf.install
+#make sure mythconverg.sql.gz is present
+ #backup_sql_check
+ #if [ $? = 1 ]
+ #then
+ # upgrade_mount_search
+ #fi
+ echo $CMDLINE | grep -q clean_upgrade
+ status=$?
+ if [ -f /tmp/etc/KnoppMyth-version -o $status = 0 ]
+ then
+ #run save syssettings to save settings, then copy to new mountpoint
+ $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
+ SE=$TEMPLATES/settings/syssettings
+ mkdir -p ${mountpoint}$SE
+ #cp -rfp $SE/* ${mountpoint}$SE/
+ cp_and_log "$SE/*" "${mountpoint}$SE/"
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chown -R mythtv:mythtv ${mountpoint}$SE
+ chmod -R 775 ${mountpoint}$SE
+ if [ ! $status = 0 ]
+ then
+ touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade
+ fi
+ fi
+
+
+
+ cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/
+ chmod -R 755 ${mountpoint}/root
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chmod 775 "$mountpoint"/etc/systemconfig
+ #mount /proc and /dev
+ mount --bind /dev "$mountpoint/dev"
+ mount --bind /proc "$mountpoint/proc"
+
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install
+ #wrap this in a network check_network, no need to update the db if the import worked.
+ ##### do I need to start mysql?
+ /etc/rc.d/mysqld stop
+ if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
+ then
+ echo $CMDLINE | grep -q clean_upgrade
+ status=$?
+ if [ $status = 0 ]
+ then
+ #new db as part of clean upgrade
+ echo "--------------------------------"
+ echo "clean upgrade installing new database"
+ echo "--------------------------------"
+ chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out
+ echo "############################################"
+ echo "End Installing new database/clean"
+ echo "############################################"
+ else
+ #proceed as normal
+ if [ -f "$mountpoint"/$BACKUPFILE ]
+ then
+ echo "--------------------------------"
+ echo "Restoring database with $BACKUPFILE"
+ echo "--------------------------------"
+ chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" "$BACKUPFILE" |tee /tmp/chrootdb_km.out
+ echo "############################################"
+ echo "End Restoring database"
+ echo "############################################"
+ else
+ echo "--------------------------------"
+ echo "Couldn't find backup file, installing new database"
+ echo "--------------------------------"
+ touch /tmp/.upgrade_db_failed
+ chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out
+ echo "############################################"
+ echo "End Installing new database"
+ echo "############################################"
+ fi
+ fi
+ fi
+
+ if [ -f /tmp/etc/KnoppMyth-version ]
+ then
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings
+ #change permissions of /myth (only needed on km->linhes)
+ chown -R mythtv:mythtv $mountpoint/myth
+ chown -R root:root $mountpoint/myth/backup
+ else
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ fi
+ #
+ #Run second time
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
+ echo "stopping mysql in chroot"
+ chroot "$mountpoint" /etc/rc.d/mysqld stop
+ apply_new_auth
+ kill_dhcp_chroot
+ umount -l "$mountpoint/dev"
+ umount -l "$mountpoint/proc"
+
+ echo "Done" > /tmp/.install_state
+ cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/
+
+ $run umount_it $disk
+ /etc/rc.d/mysqld start
+}
+
+function netboot-full_install () {
+ TEMPVAR=${CMDLINE#*nfsroot=}
+ NFSROOT=${TEMPVAR%% *}
+ NFSROOT=`echo $NFSROOT|cut -d: -f1`
+ MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
+ URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
+ echo "calling $URL"
+ echo "Starting" > /tmp/.install_state
+ curl $URL
+ ${MV_ROOT}/bin/xconfig.sh
+}
+
+# function killdhcp () {
+# if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
+# then
+# pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
+# kill -9 $pid
+# rm -f /etc/dhcpc/dhcpcd-eth0.pid
+# rm -f /var/run/dhcpcd*
+# fi
+# if [ -f /var/run/dhcpcd-eth0.pid ]
+# then
+# pid=`cat /var/run/dhcpcd-eth0.pid`
+# kill -9 $pid
+# rm -f /var/run/dhcpcd-eth0.pid*
+# fi
+# ip address flush dev eth0
+# }
+
+
+
+function SANE_SYSETTINGS () {
+sed -e '/HOSTrootfstype/d' \
+ -e '/HOSTrootfstype/d' \
+ -e '/HOSTdatafstype/d' \
+ -e '/HOSTOSsize/d' \
+ -e '/HostUseALLdata/d' \
+ -e '/HOSTDATAsize/d' \
+ -e '/HOSTuprootfstype/d' \
+ -e '/HostUseSWAP/d' \
+ -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new
+ mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
+}
+
case $1 in
- full_install_it )
- mv_install.py --rootdisk=$disk --rootfs=$rootfs --rootsize=$rootsize --datafs=$datafs --datasize=$datasize --datadisk=$disk --swapsize=$swapsize -c full_install
- ;;
+ full_install_it ) full_install ;;
- NETBOOT)
- echo "-----------------------------------------------------------------------3-----"
- netboot-full_install
- ;;
+ NETBOOT)
+echo "-----------------------------------------------------------------------3-----"
+ netboot-full_install ;;
+
+ find_update)
+
+ #TRY TO mount first partition of drive
+ #copy /etc/systemconfig to live, import settings into db
+ #umount drive
+ echo $CMDLINE | grep -q clean_upgrade
+ if [ $? = 1 ]
+ then
+ $run mount_it $disk
+ [ -e "/new_boot/root/backup/mythconverg.sql.gz" ] && cp /new_boot/root/backup/mythconverg.sql.gz /tmp
+
+
+ if [ -f /new_boot/etc/systemconfig ]
+ then
+ ###########ADD templates
+ mkdir -p $TEMP_TEMPLATES
+ cp_and_log /new_boot/$TEMPLATES $TEMP_TEMPLATES
+ SANE_SYSETTINGS
+ cp_and_log $TEMP_TEMPLATES/settings $TEMPLATES/
+ cp_and_log /new_boot/etc/systemconfig /etc/systemconfig
+ cp_and_log /new_boot/etc /tmp/etc
+ cp_and_log /new_boot/var/lib/oss /tmp/oss
+ [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/
- find_update)
- mv_install.py --rootdisk=$disk -c find_upgrade
+ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1
+ else
+ cp_and_log /new_boot/etc /tmp/etc
+ [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/
+ #now we search for the timezone and try to update
+ TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1`
+ TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -`
+
+
+ if [ $TZREGION = $TZSUB ]
+ then
+ $run update_db_it HostTimeZoneRegion "$TZREGION"
+ else
+ $run update_db_it HostTimeZoneRegion "$TZREGION"
+ $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB"
+ fi
+ fi
+ backup_sql_check
+ echo $?
+ upgrade_mount_search
+ echo $?
+ $run umount_it $disk
+ fi
;;
- upgrade_it)
- mv_install.py --rootdisk=$disk --rootfs=$rootfs -c upgrade
+ upgrade_it)
+ upgrade
;;
+ disk_model_it)
+ model="unknown"
+ size="xxx"
+ case $2 in
- disk_model_it)
- model="unknown"
- size="xxx"
- case $2 in
- h* )
- model=`cat /proc/ide/$2/model`
- ;;
- s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
- ;;
- esac
- size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' `
- echo ""$model" $size " >/tmp/model
+ h* )
+ model=`cat /proc/ide/$2/model`
+ ;;
+ s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
+ ;;
+ esac
+ size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' `
+ echo ""$model" $size " >/tmp/model
;;
+ network_check_it)
+ #Should never return from check_network
+ case $2 in
+ setup_network)
+ vnc_check
+ install_network_setup
+ ;;
- network_check_it)
- #Should never return from check_network
- case $2 in
- setup_network)
- vnc_check
- install_network_setup
- ;;
-
- check_self)
- myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
- echo "network check myself"
- ifconfig
- ping -c 1 $myipdefault
- if [ ! $? = 0 ]
- then
- exit 3
- #can't ping yourself
- fi
- ;;
- check_gw)
- #check gateway
- echo "network check gateway"
- /sbin/route -n
- mygwdefault=`/sbin/route -n |grep $default_interface|grep UG|awk '{ print $2}'`
- echo "Default gateway seems to be $mygwdefault"
- if [ ! x$mygwdefault = x ]
- then
- sleep 2
- ping -c 5 $mygwdefault
- if [ ! $? = 0 ]
- then
- exit 4
- fi
- fi
- ;;
- check_ns)
- #check nameserver
- echo " network check nameserver"
- mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
- ping -c 1 $mydns
- if [ ! $? = 0 ]
- then
- exit 5
- fi
- ;;
- check_names)
- echo "network check resolve names"
- host google.com
- if [ ! $? = 0 ]
- then
- exit 6
- fi
- ;;
- host_names)
- #if host is found, then check to see if it's online
- #if hoip matchs my ip assume it's ok
- echo "network check my hostname $hostname"
- hout=`host $hostname|head -n1`
- status=$?
- hoip=`echo $hout|awk '{print $4}'`
- if [ $hoip = found: ]
- then
- status=1
- fi
-
- unkownhost=`host unkown.linhes.org |head -n1 `
- unkownhostip=`echo $unkownhost |awk '{print $4}'`
-
- #found host, now grab the ip
- if [ $status = 0 ]
- then
- hoip=`echo $hout|awk '{print $4}'`
- /sbin/ifconfig -a |grep -q $hoip
- if [ $? = 0 ]
- then
- echo "DNS ip matches on of my ips $hoip"
- status=0
- else
- if [ $unkownhostip = $hoip ]
- then
- echo "Bad DNS returning false hits"
- echo "Assuming hostname is OK"
- echo "DNS unknown: $unkownhostip"
- echo " HOSTDNS: $hoip "
- /sbin/ifconfig -a |grep "inet addr"
- else
- echo "IP in DNS but doesn't match mine, hostname is not safe to use"
- echo "DNS:$hoip"
- echo "HOST: "
- /sbin/ifconfig -a |grep "inet addr"
- status=7
+ check_self)
+ myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
+ echo "network check myself"
+ ifconfig
+ ping -c 1 $myipdefault
+ if [ ! $? = 0 ]
+ then
+ exit 3
+ #can't ping yourself
+ fi
+ ;;
+ check_gw)
+ #check gateway
+ echo "network check gateway"
+ /sbin/route -n
+ mygwdefault=`/sbin/route -n |grep $default_interface|grep UG|awk '{ print $2}'`
+ echo "Default gateway seems to be $mygwdefault"
+ if [ ! x$mygwdefault = x ]
+ then
+ sleep 2
+ ping -c 5 $mygwdefault
+ if [ ! $? = 0 ]
+ then
+ exit 4
+ fi
+ fi
+ ;;
+ check_ns)
+ #check nameserver
+ echo " network check nameserver"
+ mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
+ ping -c 1 $mydns
+ if [ ! $? = 0 ]
+ then
+ exit 5
+ fi
+ ;;
+ check_names)
+ echo "network check resolve names"
+ host google.com
+ if [ ! $? = 0 ]
+ then
+ exit 6
+ fi
+ ;;
+ host_names)
+ #if host is found, then check to see if it's online
+ #if hoip matchs my ip assume it's ok
+ echo "network check my hostname $hostname"
+ hout=`host $hostname|head -n1`
+ status=$?
+ hoip=`echo $hout|awk '{print $4}'`
+ if [ $hoip = found: ]
+ then
+ status=1
fi
- fi
- else
- echo "Couldn't find hostname in DNS, must be safe to use"
- status=0
- fi
- exit $status
- ;;
-
- esac
- exit 0
- ;;
- * )
+ unkownhost=`host unkown.linhes.org |head -n1 `
+ unkownhostip=`echo $unkownhost |awk '{print $4}'`
+
+ #found host, now grab the ip
+ if [ $status = 0 ]
+ then
+ hoip=`echo $hout|awk '{print $4}'`
+ /sbin/ifconfig -a |grep -q $hoip
+ if [ $? = 0 ]
+ then
+ echo "DNS ip matches on of my ips $hoip"
+ status=0
+ else
+ if [ $unkownhostip = $hoip ]
+ then
+ echo "Bad DNS returning false hits"
+ echo "Assuming hostname is OK"
+ echo "DNS unknown: $unkownhostip"
+ echo " HOSTDNS: $hoip "
+ /sbin/ifconfig -a |grep "inet addr"
+ else
+ echo "IP in DNS but doesn't match mine, hostname is not safe to use"
+ echo "DNS:$hoip"
+ echo "HOST: "
+ /sbin/ifconfig -a |grep "inet addr"
+ status=7
+ fi
+ fi
+ else
+ echo "Couldn't find hostname in DNS, must be safe to use"
+ status=0
+ fi
+ exit $status
+ ;;
+
+ esac
+ exit 0
+ ;;
+
+
+ * )
if [ -f /tmp/.install_state ]
then
state=`cat /tmp/.install_state`
@@ -179,7 +709,7 @@ case $1 in
if [ -f /tmp/.startsize.io ]
then
- . /tmp/.startsize.io
+ . /tmp/.startsize.io
#finding the drive
ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
@@ -201,11 +731,7 @@ case $1 in
cond2=$(echo "$percent > 98" |bc )
if [ $cond2 -eq 1 ]
then
- percent=98
- fi
- if [ x"${state}" = "xDone" ]
- then
- percent=100
+ percent=98
fi
cond3=$(echo "$percent < 3" |bc )
if [ $cond3 -eq 0 ]
@@ -214,7 +740,7 @@ case $1 in
fi
fi
fi
- ;;
+ ;;
esac
diff --git a/abs/core-testing/LinHES-config/ir_config.sh b/abs/core-testing/LinHES-config/ir_config.sh
index 69d8406..28134e2 100644
--- a/abs/core-testing/LinHES-config/ir_config.sh
+++ b/abs/core-testing/LinHES-config/ir_config.sh
@@ -2,8 +2,7 @@ function include_lirc () {
config_file=$1
include_file=$2
grep -q ${include_file} ${config_file}
- if [ $? = 0 ]
- then
+ if [ "$?" == "0" ]; then
echo ${include_file} already present
else
echo "include \"${include_file}\"" >> $config_file
@@ -39,8 +38,7 @@ function setup_ir_remote {
#make backup copy
mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
mv ${BASE}/etc/lircrc ${BASE}/etc/lircrc.`date +%Y-%m-%d-%H-%M`
- if [ $HostBlasterType = pvr150 ]
- then
+ if [ "$HostBlasterType" == "pvr150" ]; then
Remotetype=hauppauge-blaster
fi
@@ -58,18 +56,15 @@ function setup_ir_remote {
chmod 755 /etc/lircrc
daemon_add="lircd $daemon_add"
#standard location for mythtv lircrc
- if [ ! -e /home/mythtv/.mythtv/lircrc ]
- then
- if [ ! -d /home/mythtv/.mythtv ]
- then
+ if [ ! -e /home/mythtv/.mythtv/lircrc ]; then
+ if [ ! -d /home/mythtv/.mythtv ]; then
mkdir /home/mythtv/.mythtv
chown mythtv:mythtv /home/mythtv/.mythtv
fi
ln -s /etc/lircrc /home/mythtv/.mythtv/lircrc 2> /dev/null
fi
#standard location for lircrc
- if [ ! -e /home/mythtv/.lircrc ]
- then
+ if [ ! -e /home/mythtv/.lircrc ]; then
ln -s /etc/lircrc /home/mythtv/.lircrc 2> /dev/null
fi
# echo "Sending hup to lircd"
@@ -141,16 +136,14 @@ function setup_lcd () {
x) echo "empty lcd" ;;
*) echo "setup lcd"
- if [ -f $TEMPLATES/LCD/$LCDtype/modules ]
- then
+ if [ -f $TEMPLATES/LCD/$LCDtype/modules ]; then
sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage
#should also modprobe
fi
- if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]
- then
+ if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]; then
cp_and_log $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc
# install="lcdproc $install"
daemon_add="lcdd $daemon_add"
@@ -160,10 +153,8 @@ function setup_lcd () {
fi
#check if lirc capable,if so then call setupremote
#if not in tinker mode check for remote
- if [ ! x$Remotetype = xtinker ]
- then
- if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
- then
+ if [ "$Remotetype" != "tinker" ]; then
+ if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]; then
cd $TEMPLATES/LCD/$LCDtype
for i in lircd*
do
@@ -182,18 +173,15 @@ function setup_lcd () {
}
function setup_blaster_proto () {
- if [ x$HostBlasterType = x ]
- then
+ if [ "$HostBlasterType" == "" ]; then
HostBlasterType = "crap"
fi
- if [ ! $HostBlasterType = pvr150 -a ! $HostBlasterType = None ]
- then
+ if [[ ("$HostBlasterType" != "pvr150") && ("$HostBlasterType" != "None") ]]; then
for i in `seq $Hostnumblaster`
do
TEMP=HostTransmitproto_$i
eval proto=\$${TEMP}
- if [ -f $TEMPLATES/transmit/${proto}/lircd.conf ]
- then
+ if [ -f $TEMPLATES/transmit/${proto}/lircd.conf ]; then
include_lirc ${BASE}/etc/lircd.conf $TEMPLATES/transmit/${proto}/lircd.conf
fi
done
@@ -207,8 +195,7 @@ function setup_blaster_proto () {
function setup_blaster_transmiter () {
echo "setup_blaster_transmiter"
#if it's Reciever type, then these modules have already been loaded.
- if [ ! x$HostBlasterType = xReceiver ]
- then
+ if [ "$HostBlasterType" != "Receiver" ]; then
case $HostBlasterType in
None) echo "no blaster"
sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage
@@ -235,8 +222,7 @@ function setup_blaster_transmiter () {
}
function setupir () {
- if [ ! x$Remotetype = xtinker ]
- then
+ if [ "$Remotetype" != "tinker" ]; then
setup_ir_remote
setup_ir_receiver
unload_all_lirc
diff --git a/abs/core-testing/fbsplash/PKGBUILD b/abs/core-testing/fbsplash/PKGBUILD
index 92a59ea..5d42484 100644
--- a/abs/core-testing/fbsplash/PKGBUILD
+++ b/abs/core-testing/fbsplash/PKGBUILD
@@ -2,7 +2,7 @@
pkgname=fbsplash
pkgver=1.5.4.3
-pkgrel=13
+pkgrel=14
pkgdesc="A userspace implementation of a splash screen for Linux (formerly known as gensplash)"
arch=('i686' 'x86_64')
url="http://fbsplash.berlios.de"
diff --git a/abs/core-testing/fbsplash/darch.tar.bz2 b/abs/core-testing/fbsplash/darch.tar.bz2
new file mode 100644
index 0000000..0faab98
--- /dev/null
+++ b/abs/core-testing/fbsplash/darch.tar.bz2
Binary files differ
diff --git a/abs/core-testing/fbsplash/fbsplash.inithooks b/abs/core-testing/fbsplash/fbsplash.inithooks
index 0e8c60c..c396b92 100644
--- a/abs/core-testing/fbsplash/fbsplash.inithooks
+++ b/abs/core-testing/fbsplash/fbsplash.inithooks
@@ -28,14 +28,14 @@ stat_busy() {
# Load variables #
var_load STEP_NR MAX_STEPS RC_MULTI RC_SYSINIT RC_SHUTDOWN
# Only update the splash progress if we're in sysinit, multi, or shutdown. #
- if [[ ${SPLASH_RC_MULTI} == 1 || ${SPLASH_RC_SYSINIT} == 1 || ${SPLASH_RC_SHUTDOWN} == 1 ]]; then
+ if [[ "${SPLASH_RC_MULTI}" == "1" || "${SPLASH_RC_SYSINIT}" == "1" || "${SPLASH_RC_SHUTDOWN}" == "1" ]]; then
((SPLASH_STEP_NR++))
SPLASH_PROGRESS=$((100*${SPLASH_STEP_NR}/${SPLASH_MAX_STEPS}))
SPLASH_CURRENT_PROGRESS=${SPLASH_PROGRESS}
splash_update_progress ${SPLASH_PROGRESS}
var_save STEP_NR CURRENT_PROGRESS
fi
- if [ ${SPLASH_RC_SHUTDOWN} == 1 ]; then
+ if [ "${SPLASH_RC_SHUTDOWN}" == "1" ]; then
save_shutdown_steps
fi
@@ -57,7 +57,7 @@ start_daemon() {
}
# rc.sysinit #
-if [ $CALLER == '/etc/rc.sysinit' ]; then
+if [ "$CALLER" == '/etc/rc.sysinit' ]; then
# echo "fbsplash: Setting up splash..."
splash_cache_prep
SPLASH_MAX_STEPS=$(load_boot_steps)
@@ -69,14 +69,14 @@ if [ $CALLER == '/etc/rc.sysinit' ]; then
fi
# rc.multi #
-if [ $CALLER == '/etc/rc.multi' ]; then
+if [ "$CALLER" == '/etc/rc.multi' ]; then
SPLASH_RC_MULTI=1
SPLASH_RC_SYSINIT=0
var_save RC_MULTI RC_SYSINIT
fi
# rc.shutdown #
-if [ $CALLER == '/etc/rc.shutdown' ]; then
+if [ "$CALLER" == '/etc/rc.shutdown' ]; then
# echo "fbsplash: Setting up splash..."
splash_cache_prep
SPLASH_MAX_STEPS=$(load_shutdown_steps)
diff --git a/abs/core-testing/mythtv/stable/mythweb/PKGBUILD b/abs/core-testing/mythtv/stable/mythweb/PKGBUILD
index 768eba0..e601ae9 100644
--- a/abs/core-testing/mythtv/stable/mythweb/PKGBUILD
+++ b/abs/core-testing/mythtv/stable/mythweb/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=mythweb
pkgver=0.21
-pkgrel=13
+pkgrel=15
pkgdesc="Web interface for MythTV's backend"
arch=('i686' 'x86_64')
url="http://www.mythtv.org"
@@ -23,14 +23,15 @@ build() {
# tar -zxvf $startdir/patch/icons.tar.gz
###
+ # Workaround for LIGHTTPD bug in mythweb.pl (affects DB queries)
+ cd $startdir/src/mythplugins/$pkgname/
+ patch -p0 < $startdir/patch/mythweb.pl.diff
+
cp -r $startdir/src/mythplugins/$pkgname/* $startdir/pkg/$DOCROOT
# cp $startdir/src/mythplugins-$pkgver/$pkgname/data/.htaccess $startdir/pkg/$DOCROOT
rm $startdir/pkg/srv/$DOCROOT/README
chown -R http:users $startdir/pkg/$DOCROOT
chmod g+rw $startdir/pkg/$DOCROOT/{image_cache,php_sessions,data}
-
-
-
}
diff --git a/abs/core-testing/mythtv/stable/mythweb/patch/mythweb.pl.diff b/abs/core-testing/mythtv/stable/mythweb/patch/mythweb.pl.diff
new file mode 100644
index 0000000..6dcbf99
--- /dev/null
+++ b/abs/core-testing/mythtv/stable/mythweb/patch/mythweb.pl.diff
@@ -0,0 +1,23 @@
+*** mythweb-unpatched.pl 2009-06-02 14:55:24.011861459 -0400
+--- mythweb.pl 2009-06-02 14:56:24.386441304 -0400
+***************
+*** 49,57 ****
+
+ # Connect to the database
+ END { $dbh->disconnect() if ($dbh); }
+! our $dbh = DBI->connect("dbi:mysql:database=$ENV{'db_name'}:host=$ENV{'db_server'}",
+! $ENV{'db_login'},
+! $ENV{'db_password'});
+ unless ($dbh) {
+ print header(),
+ "Cannot connect to database: $!\n\n";
+--- 49,57 ----
+
+ # Connect to the database
+ END { $dbh->disconnect() if ($dbh); }
+! our $dbh = DBI->connect("dbi:mysql:database=$ENV{'DB_NAME'}:host=$ENV{'DB_SERVER'}",
+! $ENV{'DB_LOGIN'},
+! $ENV{'DB_PASSWORD'});
+ unless ($dbh) {
+ print header(),
+ "Cannot connect to database: $!\n\n";
diff --git a/abs/core-testing/tweaker/PKGBUILD b/abs/core-testing/tweaker/PKGBUILD
index f546293..9617e49 100644
--- a/abs/core-testing/tweaker/PKGBUILD
+++ b/abs/core-testing/tweaker/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=tweaker
pkgver=1
-pkgrel=29
+pkgrel=31
pkgdesc=""
arch=('i686' 'x86_64')
diff --git a/abs/core-testing/tweaker/bin/twk_cpu.pl b/abs/core-testing/tweaker/bin/twk_cpu.pl
index fb256cb..118bac1 100755
--- a/abs/core-testing/tweaker/bin/twk_cpu.pl
+++ b/abs/core-testing/tweaker/bin/twk_cpu.pl
@@ -84,7 +84,7 @@ sub implement_option {
# }
}
case "medium" {
- change_or_make_setting('AutoCommflagWhileRecording', '0') || exit -1;
+ change_or_make_setting('AutoCommflagWhileRecording', '1') || exit -1;
change_or_make_setting('Theme', 'LinHES') || exit -1; # Moderate eye candy, moderate performance
#change_or_make_setting('PreferredMPEG2Decoder', 'libmpeg2') || exit -1; # Least CPU usage, lowest quality
#change_or_make_entry("displayprofiles", [["pref_decoder", "libmpeg2"]], [["profilegroupid", "1"], ["profileid", "1"]]) || exit -1; # Least CPU usage, lowest quality
@@ -94,7 +94,7 @@ sub implement_option {
case "high" {
change_or_make_setting('AutoCommflagWhileRecording', '1') || exit -1;
# ??? Interacts with screen aspect ratio
- change_or_make_setting('Theme', 'LinHES') || exit -1; # High eye candy, potentially low performance
+ change_or_make_setting('Theme', 'LinHES') || exit -1; # Moderate eye candy, moderate performance
#change_or_make_entry("displayprofiles", [["pref_decoder", "ffmpeg"]], [["profilegroupid", "1"], ["profileid", "1"]]) || exit -1; # Most CPU usage, best quality
#change_or_make_setting('PreferredMPEG2Decoder', 'ffmpeg') || exit -1; # Most CPU usage, best quality
change_or_make_setting('DefaultVideoPlaybackProfile', 'CPU++') || exit -1; # best playback defaults for powerful hardware
diff --git a/abs/core-testing/tweaker/bin/twk_general.pl b/abs/core-testing/tweaker/bin/twk_general.pl
index 5b48bda..387920c 100755
--- a/abs/core-testing/tweaker/bin/twk_general.pl
+++ b/abs/core-testing/tweaker/bin/twk_general.pl
@@ -407,12 +407,11 @@ sub implement_option {
change_or_make_setting('StartupSecsBeforeRecording', '120');
change_or_make_setting('TruncateDeletesSlowly', '1');
change_or_make_setting('UseOutputPictureControls', '1');
- change_or_make_setting('UserJob1', 'myth2ipod -cut \"%DIR%\" \"%FILE%\"');
- change_or_make_setting('UserJob2', 'myt2xvid3 -cut \"%DIR%\" \"%FILE%\"');
- change_or_make_setting('UserJobDesc1', 'Encode for iPod');
- change_or_make_setting('UserJobDesc2', 'Transcode to XviD');
+ change_or_make_setting('UserJob4', 'myth2mp3 -cut \"%DIR%\" \"%FILE%\"');
+ change_or_make_setting('UserJobDesc1', 'User Job #1');
+ change_or_make_setting('UserJobDesc2', 'User Job #2');
change_or_make_setting('UserJobDesc3', 'User Job #3');
- change_or_make_setting('UserJobDesc4', 'User Job #4');
+ change_or_make_setting('UserJobDesc4', 'Extract audio');
change_or_make_setting('VCDPlayerCommand', 'mplayer vcd:\/\/ -cdrom-device %d -fs -zoom -vo xv -vf pp=lb');
change_or_make_setting('VideoArtworkDir', "$SQL_DirVideo/.covers");
change_or_make_setting('VideoBrowserNoDB', '1');
diff --git a/abs/core-testing/tweaker/bin/twk_keymap.sh b/abs/core-testing/tweaker/bin/twk_keymap.sh
index 7e4ef8b..2aa38ee 100755
--- a/abs/core-testing/tweaker/bin/twk_keymap.sh
+++ b/abs/core-testing/tweaker/bin/twk_keymap.sh
@@ -69,5 +69,3 @@ else
echo "ERROR: /etc/mplayer/input.conf is missing, which is unexpected."
exit -1
fi
-
-echo "Tweaked keymap" \ No newline at end of file
diff --git a/abs/core/live-installer/PKGBUILD b/abs/core/live-installer/PKGBUILD
index 5b41dcd..e93031d 100755
--- a/abs/core/live-installer/PKGBUILD
+++ b/abs/core/live-installer/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=live-installer
pkgver=1.0
-pkgrel=26
+pkgrel=27
pkgdesc="Install and configure your system"
#depends=(bc mysql-python expect curl dnsutils)
depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils)
diff --git a/abs/core/live-installer/install_proxy.sh b/abs/core/live-installer/install_proxy.sh
index 756c46d..ec7f29c 100755
--- a/abs/core/live-installer/install_proxy.sh
+++ b/abs/core/live-installer/install_proxy.sh
@@ -44,7 +44,7 @@ full_install () {
sleep 1
$run partition_it $disk $rootsize $datasize $swapsize
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs $datafs
@@ -144,7 +144,7 @@ function upgrade () {
if [ ! x$rootfs = "xDo_not_format" ]
then
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs NO
diff --git a/abs/mv-core/MythVantage-config/PKGBUILD b/abs/mv-core/MythVantage-config/PKGBUILD
index d59299e..70c3029 100755
--- a/abs/mv-core/MythVantage-config/PKGBUILD
+++ b/abs/mv-core/MythVantage-config/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=MythVantage-config
pkgver=3.2
-pkgrel=152
+pkgrel=153
pkgdesc="The Gui-installer"
depends=(bc mysql-python expect curl dnsutils sg3_utils parted)
arch=('i686')
diff --git a/abs/mv-core/MythVantage-config/install_proxy.sh b/abs/mv-core/MythVantage-config/install_proxy.sh
index 84b397e..9019349 100755
--- a/abs/mv-core/MythVantage-config/install_proxy.sh
+++ b/abs/mv-core/MythVantage-config/install_proxy.sh
@@ -63,7 +63,7 @@ full_install () {
sleep 1
$run partition_it $disk $rootsize $datasize $swapsize
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs $datafs
@@ -165,7 +165,7 @@ function upgrade () {
if [ ! x$rootfs = "xDo_not_format" ]
then
- echo "Formating $disk" > /tmp/.install_state
+ echo "Formatting $disk" > /tmp/.install_state
progress 2
sleep 1
$run format_it $disk $rootfs NO