diff options
Diffstat (limited to 'abs/core-testing/LinHES-config-SVN')
185 files changed, 5 insertions, 23751 deletions
diff --git a/abs/core-testing/LinHES-config-SVN/PKGBUILD b/abs/core-testing/LinHES-config-SVN/PKGBUILD index cea9c1c..e2f846a 100755 --- a/abs/core-testing/LinHES-config-SVN/PKGBUILD +++ b/abs/core-testing/LinHES-config-SVN/PKGBUILD @@ -1,9 +1,9 @@ -pkgname=LinHES-config +pkgname=LinHES-config-SVN pkgver=1.0 -pkgrel=290 +pkgrel=294 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) pkgdesc="Install and configure your system" -depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan ) +depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan system-templates ) arch=('i686') source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh README) @@ -17,17 +17,14 @@ build() { mkdir $startdir/pkg/etc/profile.d install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh mkdir -p $MVDIR/bin - mkdir -p $MVDIR/templates mkdir -p $MVDIR/etc #copy in all the installer specific stuff - rsync -r --exclude=.svn ../templates $MVDIR/ install -m0700 myth_user_call $MVDIR/bin/myth_user_call install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh -# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh @@ -38,13 +35,12 @@ build() { install -m 0755 timezone.bin $MVDIR/bin/timezone.bin install -m 0755 timezip.py $MVDIR/bin/timezip.py install -m 0755 autocard.py $MVDIR/bin/autocard.py - - + #Readme used for mythvantage -r install -m 0755 README $MVDIR/README mkdir -p $startdir/pkg/usr/bin install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py - #copy in the branding stuff +#copy in the branding stuff install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release install -m 0755 issue $startdir/pkg/etc/issue @@ -52,15 +48,10 @@ build() { install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/ #copy in the binaries - #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage cd $MVDIR/bin ln -s MythVantage mythvantage ln -s MythVantage mythinstall cd - -# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect - -# install -m 0755 startx $startdir/pkg/root/startx -# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh } diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/LinHES-config-SVN/templates/LCD/Shuttle-SG33/LCDd.conf deleted file mode 100644 index d49fbf6..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/Shuttle-SG33/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=shuttleVFD -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/modules b/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/Silverstone/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircd.conf deleted file mode 100644 index ce64936..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircd.conf +++ /dev/null @@ -1,38 +0,0 @@ - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007 -# -# contributed by -# -# brand: /tmp/out -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name Antec_fusion_silver_v1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - post_data_bits 16 - post_data 0xFF - gap 131985 - min_repeat 6 - toggle_bit 0 - - - begin codes - CW 0x0001 - CCW 0x0100 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircrc b/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircrc deleted file mode 100644 index 7a39704..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/lircrc +++ /dev/null @@ -1,15 +0,0 @@ -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CW - repeat = 1 - config = ] -end - -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CCW - repeat = 1 - config = [ -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/modules b/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/antec_fusion/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config-SVN/templates/LCD/xosd/LCDd.conf b/abs/core-testing/LinHES-config-SVN/templates/LCD/xosd/LCDd.conf deleted file mode 100644 index 5b37bd7..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/LCD/xosd/LCDd.conf +++ /dev/null @@ -1,957 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, -# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, -# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS, -# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=xosd - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# GoodBye message: each entry represents a display line; default: builtin -#GoodBye="Thanks for using" -#GoodBye=" LCDproc!" - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## -[ea65] - -# Device is fixed /dev/ttyS1 -# Width and Height are fixed 9x1 - -# As the VFD is self luminescent we don't have a backlight -# But we can use the backlight functions to control the front LEDs -# Brightness 0 to 299 -> LEDs off -# Brightness 300 to 699 -> LEDs half bright -# Brightness 700 to 1000 -> LEDs full bright -Brightness=500 -# OffBrightness is the the value used for the 'backlight off' state -OffBrightness=0 - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# Some displays (e.g. vdr-wakeup) need a message from the driver to that it -# is still alive. When set to a value bigger then null the character in the -# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0. -#KeepAliveDisplay=0 - -# If you experience occasional garbage on your display you can use this -# option as workaround. If set to a value bigger than null it forces a -# full screen refresh <RefreshDiplay> seconds. Default: 0. -#RefreshDisplay=5 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=480 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# The following table translates from MtxOrb key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Mini-box.com picoLCD (usblcd) driver ## -[picolcd] -# This is for the Mini-Box.com usblcd device that ships with the M300. It can -# also be purchased separately but this driver has only been tested on the M300 -# setup. - -# KeyTimeout is the time that LCDd spends waiting for a key press before cycling -# through other duties. Higher values make LCDd use less CPU time and make -# key presses more detectable. Lower values make LCDd more responsive but a -# little prone to missing key presses. 500 (.5 second) is the default and a -# balanced value. -KeyTimeout=500 - -# Contrast: [default: 1000; legal: 0 - 1000] -Contrast=1000 - -# Light the keys? i[default: on; legal: on, off] -Keylights=on - -# If Keylights is on, the you can unlight specific keys below: -# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. -# There is no LED for the +/- keys. This is a handy way to indicate to users -# which keys are disabled. [default: on; legal: on, off] -Key0Light=on -Key1Light=on -Key2Light=on -Key3Light=on -Key4Light=on -Key5Light=on - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) -# Note: Currently only tested with G321D & SP14Q002. -Type=G321D - -# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] -CellSize=6x10 - -# Select what type of connection [legal: classic, bitshaker; default: classic] -ConnectionType=classic - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## serial POS display driver ## -[serialPOS] - -# Device to use in serial modea [default: /dev/lcd] -Device=/dev/lcd - -# Specifies the size of the display in characters. [default: 16x2] -Size=16x2 - -# Set the communication protocol to use with the POS display. -# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] -Type=AEDEX - -# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200] -Speed=9600 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use, in XLFD format, as given by "xfontsel" -Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-* - - -# EOF diff --git a/abs/core-testing/LinHES-config-SVN/templates/cc.orig.sh b/abs/core-testing/LinHES-config-SVN/templates/cc.orig.sh deleted file mode 100755 index d8fd2dc..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/cc.orig.sh +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/perl -# rwraithr added segment for 4 digit channels -# make sure to set this string to -# the corresponding remote in /etc/remoted.conf -#$remote_name = "RC-u43c-1h"; -$remote_name = "$REMOTE_NAME"; - -sub change_channel { - my($channel_digit) = @_; - system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit"); - sleep .5; -} - -$channel=$ARGV[0]; -sleep 1; -if (length($channel) > 3) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); - change_channel(substr($channel,3,1)); -} elsif (length($channel) > 2) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); -} elsif (length($channel) > 1) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); -} else { - change_channel(substr($channel,0,1)); -} -system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT"); - -#system ("sleep 2"); -#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2"); -#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2"); diff --git a/abs/core-testing/LinHES-config-SVN/templates/cc.sh b/abs/core-testing/LinHES-config-SVN/templates/cc.sh deleted file mode 100755 index 0cce308..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/cc.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -/usr/local/bin/cc.orig.sh $@ & -/usr/local/bin/cc_vol.sh & - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/cc_vol.sh b/abs/core-testing/LinHES-config-SVN/templates/cc_vol.sh deleted file mode 100755 index 819008d..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/cc_vol.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -sleep 2 -/usr/local/bin/ivtvctl -p 2 -d /dev/video2 -/usr/local/bin/ivtvctl -p 1 -d /dev/video2 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/change_chan.sh b/abs/core-testing/LinHES-config-SVN/templates/change_chan.sh deleted file mode 100755 index 5ad8765..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac -# /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config-SVN/templates/cron.template b/abs/core-testing/LinHES-config-SVN/templates/cron.template deleted file mode 100644 index 3fcea10..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/cron.template +++ /dev/null @@ -1,4 +0,0 @@ -# <minute> <hour> <day> <month> <dow> <command> - - -00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4address b/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4address deleted file mode 100644 index 1df28d2..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4address +++ /dev/null @@ -1,2 +0,0 @@ -192.168.1.158/24 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4route b/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4route deleted file mode 100644 index 373a4d1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/ipv4route +++ /dev/null @@ -1,2 +0,0 @@ -default via 192.168.1.1 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/iwconfig b/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/iwconfig deleted file mode 100644 index b1f14e0..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/iwconfig +++ /dev/null @@ -1,2 +0,0 @@ -essid home_lan -#key ababababab diff --git a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/options b/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/options deleted file mode 100644 index 929da58..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/etcnet/eth/options +++ /dev/null @@ -1,7 +0,0 @@ -# If you want to change current interface name, edit /etc/net/iftab, -# rename current directory and uncomment this line: -TYPE=eth -DISABLED=no -BOOTPROTO=dhcp -ONBOOT=yes -CONFIG_WIRELESS=no diff --git a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-4 b/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-4 deleted file mode 100644 index e69de29..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-4 +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-8 b/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-8 deleted file mode 100644 index e69de29..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-8 +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-Full b/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-Full deleted file mode 100644 index e69de29..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage-Full +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-minipac b/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-minipac deleted file mode 100644 index 0e3a708..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-minipac +++ /dev/null @@ -1,3 +0,0 @@ -"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" -"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject" - diff --git a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-uhid b/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-uhid deleted file mode 100644 index 7cb2e34..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/evrouter/MythVantage8-uhid +++ /dev/null @@ -1,3 +0,0 @@ -"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" -"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject" - diff --git a/abs/core-testing/LinHES-config-SVN/templates/exports.template b/abs/core-testing/LinHES-config-SVN/templates/exports.template deleted file mode 100644 index b883932..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/exports.template +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/exports -# -# See exports(5) for a description. - -# use exportfs -arv to reread -/myth REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) -/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) - diff --git a/abs/core-testing/LinHES-config-SVN/templates/fstab.conf.template b/abs/core-testing/LinHES-config-SVN/templates/fstab.conf.template deleted file mode 100755 index f8544cf..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/fstab.conf.template +++ /dev/null @@ -1,16 +0,0 @@ -# -# /etc/fstab: static file system information -# -# <file system> <dir> <type> <options> <dump> <pass> -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 - -/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 -/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 -/dev/fd0 /mnt/fl vfat user,noauto 0 0 - -/dev/sda1 / reiserfs defaults 0 1 -/dev/sda2 swap swap defaults 0 0 -/dev/sda3 /data reiserfs defaults 0 0 -192.168.1.6:/myth /myth nfs - diff --git a/abs/core-testing/LinHES-config-SVN/templates/modules/lirc_i2c.conf b/abs/core-testing/LinHES-config-SVN/templates/modules/lirc_i2c.conf deleted file mode 100644 index 7b99f78..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/modules/lirc_i2c.conf +++ /dev/null @@ -1,2 +0,0 @@ -alias char-major-61 lirc_i2c -options lirc_i2c debug=0 minor=3 diff --git a/abs/core-testing/LinHES-config-SVN/templates/mysql.service b/abs/core-testing/LinHES-config-SVN/templates/mysql.service deleted file mode 100644 index 160450e..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/mysql.service +++ /dev/null @@ -1,13 +0,0 @@ -<?xml version="1.0" standalone='no'?><!--*-nxml-*--> -<!DOCTYPE service-group SYSTEM "avahi-service.dtd"> - -<service-group> - - <name replace-wildcards="yes">mysql_myth on %h</name> - - <service> - <type>_mysql._tcp</type> - <port>3306</port> - </service> - -</service-group> diff --git a/abs/core-testing/LinHES-config-SVN/templates/mysql.txt b/abs/core-testing/LinHES-config-SVN/templates/mysql.txt deleted file mode 100755 index 04531b5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/mysql.txt +++ /dev/null @@ -1,29 +0,0 @@ -DBHostName=127.0.0.1 -DBUserName=mythtv -DBPassword=mythtv -DBName=mythconverg -DBType=QMYSQL3 - -# Set the following if you want to use something other than the -# machine's real hostname for identifying settings in the database. -# This is useful if your hostname changes often, as otherwise -# you'll need to reconfigure mythtv (or futz with the DB) every time. -# TWO HOSTS MUST NOT USE THE SAME VALUE -# -#LocalHostName=my-unique-identifier-goes-here - -# If you want your frontend to be able to wake your MySQL server -# using WakeOnLan, have a look at the following settings: -# -# Set the time the frontend waits (in seconds) between reconnect tries. -# This should be the rough time your MySQL server needs for startup -#WOLsqlReconnectWaitTime=0 -# -# -# This is the amount of retries to wake the MySQL server until the frontend -# gives up -#WOLsqlConnectRetry=5 -# -# -# This is the command executed to wake your MySQL server. -#WOLsqlCommand=echo 'WOLsqlServerCommand not set' diff --git a/abs/core-testing/LinHES-config-SVN/templates/ncid.conf.template b/abs/core-testing/LinHES-config-SVN/templates/ncid.conf.template deleted file mode 100755 index 43ef490..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/ncid.conf.template +++ /dev/null @@ -1,51 +0,0 @@ -# tcl/tk configuration file - -# Directory NCID uses to find the helper scripts -set ProgDir /usr/share/ncid - -# default helper script -set EXTPROG ncid-osd - -# Set Host to the NCID server address -# Host defaults to 127.0.0.1 -#set Host 127.0.0.1 -set Host 192.168.1.5 - -# The NCID port default is 3333 -set Port 3333 - -# If the connection to the server is lost, -# try every Delay seconds to reconnect -# The Default: 60 -set Delay 20 - -# If set to 1, display raw data received from the NCID server -# If set to 0, do not display raw data received from the NCID server -# Default: 0 -set Raw 0 - -# If set to 1, output: date time number name -# If set to 0, output: name number -# Default: 0 -set All 1 - -# If set to 1, display formatted CID, and CID log file on connect -# If set to 0, ddo not isplay formatted CID, and CID log file on connect -# Default: 0 -set Verbose 0 - -# If set to 1, display information in terminal progran or external program -# If set to 0, display information using a GUI -# Default: 0 -set NoGUI 1 - -# output name and number to external program -# Default: 0 -set Callprog 1 - -# ring number to call external program -# Default: 0 -set CallOnRing 0 - -# external called program -set Program [list $ProgDir/$EXTPROG] diff --git a/abs/core-testing/LinHES-config-SVN/templates/ncidd.conf.template b/abs/core-testing/LinHES-config-SVN/templates/ncidd.conf.template deleted file mode 100644 index daa2e79..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/ncidd.conf.template +++ /dev/null @@ -1,143 +0,0 @@ -# ncid - Network CallerID Server Config File - -################################ -# Definitions and Line formats # -################################ - -# lines can be blank, or start with the words: send, set # -# -# A line is divided into words, separated by spaces -# -# A word is either a string of non-blank characters, everything -# between double quotes, or an equal sign. -# -# SEND LINE FORMAT: -# send DATATYPE [DATATYPE] ... -# where DATATYPE = cidlog, cidinfo -# -# SET LINE FORMAT: -# set ITEM = VALUE [ITEM = VALUE] ... -# where ITEM = cidalias, cidlog, datalog, initcid, initstr, -# lockfile, port, ttyclocal, ttyport, ttyspeed, -# nomodem - -############################ -# Log and Info for Clients # -############################ - -# Send the call log to a client when connected -# The default is not to send the call log file -send cidlog - -# Send call info (LINE and RING) to a client at each ring -# The default is not to send the call info line -send cidinfo - -############################ -# NCID Communications Port # -############################ - -# The default TCP/IP port is 3333 - set port = 3333 - -####################### -# Alias and Log Files # -####################### - -# The default CID alias file: /etc/ncid/ncidd.alias -# set cidalias = /etc/ncid/ncidd.alias - -# The default CID call log file: /var/log/cidcall.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set cidlog = /var/log/cidcall.log - -# The default tty data log file: /var/log/ciddata.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set datalog = /var/log/ciddata.log - -##################### -# TTY Configuration # -##################### - -# The default tty port: /dev/modem -# set ttyport = /dev/cu.modem # Macintosh OS X - set ttyport = /dev/ttyS1 - -# The default tty port speed: 19200 -# The tty speed can be one of: 38400, 19200, 9600, 4800 -# set ttyspeed = 4800 # NetCallerID port speed - -# Ignore tty control signals for internal modems and 3 wire serial cables -# Disable tty control signals: ttyclocal = 1 -# Enable tty control signals: ttyclocal = 0 (default) -# set ttyclocal = 1 - -# The lockfile name is generated automatically -# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem -# set lockfile = /var/lock/LCK..ttyS0 - -##################### -# Modem or No Modem # -##################### - -# Obtain CallerID from a CID device or a modem -# device: nomodem = 1 (do not send AT commands) -# modem: nomodem = 0 (default - send AT commands) -# set nomodem = 1 - -######################## -# Modem Initialization # -######################## - -# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" -# set initstr = "ATE1V1Q0" -# -# Alternate modem initialization string -# set initstr = "AT&FE1V1Q0+VIP" - -# Addon strings to set modem for Distinctive Ring: -# http://www.modemsite.com/56k/dring.asp -# -# 3Com/USR/TI chipset: ATS41=1 -# Reported Ring Codes: RING A, RING B, RING C -# Rockwell/Conexant chipset: AT-SDR=7 -# Reported Ring Codes: RING 1, RING 2, RING 3 -# Lucent/Agere chipset: AT+VDR=1,0 -# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 -# -# Example adds 3Com DR to the default modem initialization -# set initstr = "ATE1V1Q0S41=1" - -# The default for ncidd is to try two CID strings to setup -# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". -# set initcid = "AT#CID=1" -# -# Alternate CID strings to try if default does not work: -# set initcid = "AT+FCLASS=8;+VCID=1" -# set initcid = "AT-STE=1;+VCID=1" -# set initcid = "AT-STE=1;#CID=1" - -################# -# TiVo Settings # -################# -# set ttyclocal = 1 # TiVo requires CLOCAL -# set ttyport = /dev/ttyS1 # TiVo Modem Port -# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port -# -# To use a modem on the TiVo serial port -# Tivo (stereo mini jack) -> -# -> (stereo mini plug) TiVo serial cable (9-pin male) -> -# -> (9-pin Female) PC modem cable (25-pin Male -> -# -> (25-pin Female) Modem -# if the modem has switches, disable DTR -# Use this string to set the modem before attaching it to the TiVo: -# AT&F0&D0&B1&W -# -# set ttyport = /dev/ttyS3 # TiVo Serial Port -# -# End TiVo Settings - diff --git a/abs/core-testing/LinHES-config-SVN/templates/real_change_chan.sh b/abs/core-testing/LinHES-config-SVN/templates/real_change_chan.sh deleted file mode 100755 index efeba88..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/real_change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac - /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircd.conf deleted file mode 100644 index 087b9ad..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircd.conf +++ /dev/null @@ -1,76 +0,0 @@ -# brand: ATI Remote Wonder -# model no. of remote control: 5000023600 -# devices being controlled by this remote: ATI USB Receiver -# -# Found on a linpvr.org forum, thanks. - -begin remote - - name ati_remote - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 235966 - toggle_bit 0 - - - begin codes - a 0x00000014D5000000 - b 0x00000014D6010000 - power 0x00000014D7020000 - tv 0x00000014D8030000 - dvd 0x00000014D9040000 - web 0x00000014DA050000 - media_library 0x00000014DB060000 - drag 0x00000014DC070000 - mouse-button_left 0x000000144D780000 - mouse-button_right 0x00000014517C0000 - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-left_up 0x0000001449740000 - mouse-right_up 0x000000144A750000 - mouse-left_down 0x000000144C770000 - mouse-right_down 0x000000144B760000 - vol-up 0x00000014DD080000 - vol-down 0x00000014DE090000 - mute 0x00000014DF0A0000 - chan-up 0x00000014E00B0000 - chan-down 0x00000014E10C0000 - 1 0x00000014E20D0000 - 2 0x00000014E30E0000 - 3 0x00000014E40F0000 - 4 0x00000014E5100000 - 5 0x00000014E6110000 - 6 0x00000014E7120000 - 7 0x00000014E8130000 - 8 0x00000014E9140000 - 9 0x00000014EA150000 - 0 0x00000014EC170000 - dvd-root_menu 0x00000014EB160000 - launch_setup 0x00000014ED180000 - c 0x00000014EE190000 - d 0x00000014F01B0000 - tv_on_demand 0x00000014F11C0000 - max_window 0x00000014F5200000 - cursor-up 0x00000014EF1A0000 - cursor-down 0x00000014F7220000 - cursor-left 0x00000014F21D0000 - cursor-right 0x00000014F41F0000 - ok 0x00000014F31E0000 - e 0x00000014F6210000 - f 0x00000014F8230000 - rewind 0x00000014F9240000 - play 0x00000014FA250000 - fastforward 0x00000014FB260000 - record 0x00000014FC270000 - stop 0x00000014FD280000 - pause 0x00000014FE290000 - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircrc deleted file mode 100644 index a2f1ebb..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/lircrc +++ /dev/null @@ -1,592 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the ATI-Wonder Remote -# using lirc_atiusb driver -# - -begin -#Jumppoint for Program Guide created in Mythweb - prog = mythtv - button = tv - config = ! -end - -begin -#Jumppoint for DVD playback created in Mythweb - prog = mythtv - button = dvd - config = @ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = web - config = # -end - -begin - prog = mythtv -#Jumppoint for MythVideo created in Mythweb - button = media_library - config = $ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = HAND - config = % -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin - prog = mythtv - button = mouse-up - config = Up -end - -begin - prog = mythtv - button = mouse-down - config = Down -end - -begin - prog = mythtv - button = mouse-left - config = Left -end - -begin - prog = mythtv - button = mouse-right - config = Right -end - -begin - prog = mythtv - button = mouse-button-right - config = Esc -end - -begin - prog = mythtv -# Enter button - button = mouse-button-left - config = Return -end - -begin - prog = mythtv - button = power - config = Esc -end - -begin - prog = mythtv -# Enter button - button = ok - config = Return -end - -begin - prog = mythtv - button = cursor-up - config = Up -end - -begin - prog = mythtv - button = cursor-down - config = Down -end - -begin - prog = mythtv - button = cursor-left - config = Left -end - -begin - prog = mythtv - button = cursor-right - config = Right -end - -begin - prog = mythtv - button = D - config = Esc -end - -begin -prog = mythtv -button = chan-up -config = Up -end - -begin -prog = mythtv -button = chan-down -config = Down -end - -begin - prog = mythtv - button = vol-down - repeat = 3 - config = F10 -end - -begin - prog = mythtv - button = vol-up - repeat = 3 - config = F11 -end -begin - prog = mythtv - button = mute - config = F9 -end - -begin -# Mute for MythMusic - prog = mythtv - button = mute - config = | -end - -begin - prog = mythtv - button = dvd-root_menu - config = M -end - -begin - prog = mythtv -# Enter button - button = launch_setup - config = Return -end - - -begin - prog = mythtv - button = a - config = S -end - -begin - prog = mythtv - button = b - config = I -end - -begin - prog = mythtv - button = c - config = T -end - -begin -prog = mythtv -# Change focus for PiP (to change channel in the other window) -button = max_window -config = B -end - -begin -prog = mythtv -# Toggle PiP on/off -button = tv_on_demand -config = V -end - -begin - prog = mythtv - button = rewind - config = Left -end - - -begin - prog = mythtv - button = fastforward - config = Right -end - -begin -prog = mythtv -button = record -config = R -end - -begin -prog = mythtv -button = stop -config = Esc -end - -begin -prog = mythtv -button = play -config = P -end - -begin -prog = mythtv -button = pause -config = P -end - -begin -prog = mythtv -button = e -# Use for backwards commercial skip -config = Q -end - -begin -prog = mythtv -button = f -# Use for forward commercial skip -config = Z -end - -#Mplayer - -begin -prog = mplayer -button = play -config = pause -end - -begin -prog = mplayer -button = pause -config = pause -end - -begin -prog = mplayer -button = stop -config = quit -end - -begin -prog = mplayer -button = power -config = quit -end - -begin -prog = mplayer -button = d -config = quit -end - -begin -prog = mplayer -button = mouse-button-right -config = quit -end - -begin -prog = mplayer -button = mute -config = mute -end - -begin -prog = mplayer -button = e -repeat = 6 -config = seek -10 -end - -begin -prog = mplayer -button = r -repeat = 6 -config = seek 10 -end - -begin -prog = mplayer -button = rewind -repeat = 6 -config = seek -70 -end - -begin -prog = mplayer -button = fastforward -repeat = 6 -config = seek 70 -end - -begin -prog = mplayer -button = vol-down -repeat = 6 -config = volume -1 -end - -begin -prog = mplayer -button = vol-up -repeat = 6 -config = volume 1 -end - -#Xine - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = pause -config = PAUSE -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = power -config = Quit -end - -begin -prog = xine -button = d -config = quit -end - -begin -prog = xine -button = mouse-button-right -config = quit -end - -begin -prog = xine -button = cursor-up -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = cursor-down -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = cursor-left -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = corsor-right -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = ok -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = mouse-up -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = mouse-down -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = mouse-left -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = mouse-right -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = mouse-button-left -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = dvd-root_menu -repeat = 0 -config = Menu -end - -#vol down -begin -prog = xine -button = vol-down -repeat = 1 -config = Volume- -end - -#vol up -begin -prog = xine -button = vol-up -repeat = 1 -config = Volume+ -end - -begin -prog = xine -button = tv_on_demand -repeat = 1 -config = ZoomIn -end - -begin -prog = xine -button = max_window -repeat = 1 -config = ZoomOut -end - -#skip chapter forward -begin -prog = xine -button = fastforward -repeat = 1 -config = EventNext -end - -#skip chapter backward -begin -prog = xine -button = rewind -repeat = 1 -config = EventPrior -end - -begin -prog = xine -button = f -repeat = 2 -config = SeekRelative+45 -end - -begin -prog = xine -button = e -repeat = 2 -config = SeekRelative-45 -end - - - - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/preview.jpg Binary files differdeleted file mode 100644 index 351a111..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ATI_wonder/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS deleted file mode 100644 index b76d32c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircrc deleted file mode 100644 index 5e668b5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/preview.jpg Binary files differdeleted file mode 100644 index 38857f9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MX-500-jams/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircd.conf deleted file mode 100644 index b76d32c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircd.conf +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircrc deleted file mode 100755 index 2663c63..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/lircrc +++ /dev/null @@ -1,857 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 5 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -repeat = 5 -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Return -repeat = 5 -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -repeat = 5 -end - -begin -prog = mythtv -button = EXIT -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = Space -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = p -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -repeat = 5 -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = r -repeat = 5 -end - -begin -prog = mythtv -# rewind -button = << -config = Home -repeat = 5 -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -repeat = 5 -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = S -repeat = 5 -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/preview.jpg Binary files differdeleted file mode 100644 index e2af610..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/MythVantage-one/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf deleted file mode 100644 index f8175f3..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf +++ /dev/null @@ -1,87 +0,0 @@ -# this config file was generated -# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 -# -# contributed by Jarod Wilson <jcw@wilsonet.com> -#------------------------------------------------------------------------------ -# -# filename: RadioShack_15-2116-vcr0081.lirc -# encoding: RC-5 -# brand: RadioShack Universal (and others) -# model: 15-2116, set as VCR type 0081 -# supported devices: all -# -# note: requires quite a bit of key reassignment w/keymover and EFCs... -# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO -# -#------------------------------------------------------------------------------ - -begin remote - - name rs15-2116-vcr0081 - bits 11 - flags RC5|CONST_LENGTH - eps 20 - aeps 0 - header 0 0 - one 889 889 - zero 889 889 - plead 889 - ptrail 0 - foot 0 0 - repeat 0 0 - pre_data_bits 2 - pre_data 0x02 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 113792 - toggle_bit 2 - frequency 36000 - duty_cycle 50 - - begin codes - 0 0x0000000000000140 - 1 0x0000000000000141 - 2 0x0000000000000142 - 3 0x0000000000000143 - 4 0x0000000000000144 - 5 0x0000000000000145 - 6 0x0000000000000146 - 7 0x0000000000000147 - 8 0x0000000000000148 - 9 0x0000000000000149 - INFO 0x000000000000014a - SELECT 0x000000000000014b - POWER 0x000000000000014c - MUTE 0x000000000000014d - MOVE 0x000000000000014e - VOL+ 0x0000000000000150 - VOL- 0x0000000000000151 - RIGHT 0x000000000000015a - LEFT 0x000000000000015b - ENTER 0x000000000000015c - MENU 0x000000000000015d - CH+ 0x0000000000000160 - CH- 0x0000000000000161 - PIP 0x0000000000000162 - SWAP 0x0000000000000163 - SLEEP 0x0000000000000166 - FREEZE 0x0000000000000168 - PAUSE 0x0000000000000169 - SKIP 0x000000000000016a - EXIT 0x0000000000000171 - REW 0x0000000000000172 - REPLAY 0x0000000000000173 - FFWD 0x0000000000000174 - PLAY 0x0000000000000175 - STOP 0x0000000000000176 - REC 0x0000000000000177 - SKIP 0x0000000000000178 - +100 0x0000000000000179 - LAST 0x000000000000017b - GUIDE 0x000000000000017c - TV/VIDEO 0x000000000000017e - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs deleted file mode 100644 index 91c0de5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs +++ /dev/null @@ -1,539 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the RadioShack 15-2116, VCR type 0081 -# using Hauppauge IR receiver -# -# By Jarod Wilson, 2003/12/31 -# Amalgamated from Harry O's -# .lircrc, the mythtv.org docs, and -# a few touches of my own. :) -# - -# Channel Up -begin -prog = mythtv -button = CH+ -repeat = 4 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH- -repeat = 4 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = SELECT -repeat = 4 -config = Return -end - -# Play -begin -prog = mythtv -button = PLAY -repeat = 4 -config = Space -end - -# Stop -begin -prog = mythtv -button = STOP -repeat = 4 -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = EXIT -repeat = 4 -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -repeat = 4 -config = Esc -end - -# Pause -begin -prog = mythtv -button = PAUSE -repeat = 4 -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -repeat = 4 -config = | -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = REW -repeat = 4 -config = Left -end - -begin -prog = mythtv -button = LEFT -repeat = 4 -config = Left -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = FFWD -repeat = 4 -config = Right -end - -begin -prog = mythtv -button = RIGHT -repeat = 4 -config = Right -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = FREEZE -repeat = 4 -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = MOVE -repeat = 4 -config = PgUp -end - -# Record -begin -prog = mythtv -button = REC -repeat = 4 -config = R -end - -# OSD browse -begin -prog = mythtv -button = GUIDE -repeat = 4 -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = MENU -repeat = 4 -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = INFO -repeat = 4 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = +100 -repeat = 4 -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = SLEEP -repeat = 4 -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = ENTER -repeat = 4 -config = Z -end - -# Change TV card input -begin -prog = mythtv -button = TV/VIDEO -repeat = 4 -config = C -end - -# Toggle Picture-In-Picture -begin -prog = mythtv -button = PIP -repeat = 4 -config = V -end - -# Swap PIP -begin -prog = mythtv -button = SWAP -repeat = 4 -config = N -end - -# Cycle through channel history -begin -prog = mythtv -button = LAST -repeat = 4 -config = H -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 4 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 4 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 4 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 4 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 4 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 4 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 4 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 4 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 4 -config = 9 -end - -### MPlayer commands - -begin -prog = mplayer -button = MENU -repeat = 4 -config = osd -end - -begin -prog = mplayer -button = PAUSE -repeat = 4 -config = pause -end - -begin -prog = mplayer -button = PLAY -repeat = 4 -config = seek +1 -end - -begin -prog = mplayer -button = STOP -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = mplayer -button = REW -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = LEFT -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = FFWD -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = RIGHT -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = EXIT -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = FREEZE -repeat = 4 -config = seek +1200 -end - -begin -prog = mplayer -button = MOVE -repeat = 4 -config = seek -1200 -end - -begin -prog = mplayer -button = +100 -repeat = 4 -config = vo_fullscreen -end - -### Xine commands - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = SELECT -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = GUIDE -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFWD -repeat = 3 -config = SeekRelative+30 -end - -begin -prog = xine -button = REW -repeat = 3 -config = SeekRelative-30 -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = FREEZE -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = LAST -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = INFO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = ENTER -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = SLEEP -repeat = 3 -config = SpeedSlower -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg Binary files differdeleted file mode 100644 index d465839..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/LinHES-config-SVN/templates/remotes/adaptec/lircd.conf.AVC-2410 deleted file mode 100644 index 3f6c5f0..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/adaptec/lircd.conf.AVC-2410 +++ /dev/null @@ -1,62 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005 -# -# contributed by -# -# brand: Adaptec -# model no. of remote control: -# devices being controlled by this remote: AVC-2410 capture card -# - -begin remote - - name AVC-2410 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 16 - pre_data 0x82F1 - gap 202922 - min_repeat 0 - toggle_bit 0 - - - begin codes - Live 0x00000000000025DA - Timeshift 0x00000000000017E8 - Scan 0x00000000000018e7 - Power 0x00000000000009f6 - 1 0x00000000000026D9 - 2 0x00000000000019E6 - 3 0x00000000000010EF - 4 0x00000000000027D8 - 5 0x00000000000020DF - 6 0x00000000000011EE - 7 0x00000000000028D7 - 8 0x00000000000021DE - 9 0x00000000000012ED - 0 0x00000000000022DD - Mute 0x00000000000013EC - Full 0x00000000000029D6 - Play 0x00000000000030CF - Stop 0x00000000000023DC - Skip 0x00000000000024DB - Replay 0x00000000000014EB - Rewind 0x00000000000031CE - Forward 0x00000000000015EA - Ch+ 0x00000000000001FE - Ch- 0x00000000000005FA - Vol+ 0x00000000000004FB - Vol- 0x00000000000002FD - Enter 0x00000000000003FC - OSD 0x00000000000032CD - cc 0x00000000000016E9 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircd.conf.animax deleted file mode 100644 index 06a4102..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircd.conf.animax +++ /dev/null @@ -1,199 +0,0 @@ - -# -# This is a space encoded remote control from AnimaX. -# You need at least lirc-0.5.4 to use this config file -# -# contributed by Karsten Scheibler <karsten.scheibler@student.uni-halle.de> -# -# brand: AnimaX -# model: Anir Remote Control -# supported devices: This remote control comes with some TV Tuner cards from -# Hauppauge. -# - -begin remote - - name ANIMAX - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 2500 2500 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_gap 102937 - repeat_bit 0 - - begin codes - CD_DOWN 0x000000000000DB24 - CD_UP 0x0000000000005BA4 - TV_DOWN 0x000000000000DC23 - TV_UP 0x0000000000005CA3 - PHONE_DOWN 0x000000000000DD22 - PHONE_UP 0x0000000000005DA2 - RADIO_DOWN 0x000000000000DE21 - RADIO_UP 0x0000000000005EA1 - VIDEO_DOWN 0x000000000000DF20 - VIDEO_UP 0x0000000000005FA0 - AUX1_DOWN 0x000000000000E01F - AUX1_UP 0x000000000000609F - MAIL_DOWN 0x000000000000E11E - MAIL_UP 0x000000000000619E - AUX2_DOWN 0x000000000000E21D - AUX2_UP 0x000000000000629D - POWER_DOWN 0x000000000000E31C - POWER_UP 0x000000000000639C - LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B - LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B - REWIND_DOWN 0x000000000000E51A - REWIND_UP 0x000000000000659A - PLAY_DOWN 0x000000000000E619 - PLAY_UP 0x0000000000006699 - FORWARD_DOWN 0x000000000000E718 - FORWARD_UP 0x0000000000006798 - SKIP_BACKWARD_DOWN 0x000000000000E817 - SKIP_BACKWARD 0x0000000000006897 - STOP_DOWN 0x000000000000E916 - STOP_UP 0x0000000000006996 - SKIP_FORWARD_DOWN 0x000000000000EA15 - SKIP_FORWARD_UP 0x0000000000006A95 - CHANNEL_UP_DOWN 0x000000000000EB14 - CHANNEL_UP_UP 0x0000000000006B94 - MENU_DOWN 0x000000000000EC13 - MENU_UP 0x0000000000006C93 - VOLUME_UP_DOWN 0x000000000000ED12 - VOLUME_UP_UP 0x0000000000006D92 - BLUE_BUTTON_DOWN 0x000000000000EE11 - BLUE_BUTTON_UP 0x0000000000006E91 - MUTE_DOWN 0x000000000000EF10 - MUTE_UP 0x0000000000006F90 - VOLUME_DOWN_DOWN 0x000000000000F00F - VOLUME_DOWN_UP 0x000000000000708F - RED_BUTTON_DOWN 0x000000000000F10E - RED_BUTTON_UP 0x000000000000718E - GREEN_BUTTON_DOWN 0x000000000000F20D - GREEN_BUTTON_UP 0x000000000000728D - CHANNEL_DOWN_DOWN 0x000000000000F30C - CHANNEL_DOWN_UP 0x000000000000738C - 1_DOWN 0x000000000000F40B - 1_UP 0x000000000000748B - 2_DOWN 0x000000000000F50A - 2_UP 0x000000000000758A - 3_DOWN 0x000000000000F609 - 3_UP 0x0000000000007689 - 4_DOWN 0x000000000000F708 - 4_UP 0x0000000000007788 - 5_DOWN 0x000000000000F807 - 5_UP 0x0000000000007887 - 6_DOWN 0x000000000000F906 - 6_UP 0x0000000000007986 - 7_DOWN 0x000000000000FA05 - 7_UP 0x0000000000007A85 - 8_DOWN 0x000000000000FB04 - 8_UP 0x0000000000007B84 - 9_DOWN 0x000000000000FC03 - 9_UP 0x0000000000007C83 - SLASH_DOWN 0x000000000000FD02 - SLASH_UP 0x0000000000007D82 - 0_DOWN 0x000000000000FE01 - 0_UP 0x0000000000007E81 - MINUS_DOWN 0x000000000000FF00 - MINUS_UP 0x0000000000007F80 - end codes - -end remote - - -begin remote - - name ANIMAX_MOUSE_BUTTONS - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 0 0 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_bit 0 - - begin codes - RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639 - RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9 - LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31 - LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1 - end codes - -end remote - - -begin remote - - name ANIMAX_MOUSE_PAD - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 2500 2500 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_gap 8437 - repeat_bit 0 - - begin codes - MOUSE_NNW 0x000000000000906F - MOUSE_NW 0x000000000000D02F - MOUSE_NWW 0x000000000000916E - MOUSE_W 0x000000000000D12E - MOUSE_SWW 0x000000000000926D - MOUSE_SW 0x000000000000D22D - MOUSE_SSW 0x000000000000936C - MOUSE_S 0x000000000000D32C - MOUSE_SSE 0x000000000000946B - MOUSE_SE 0x000000000000D42B - MOUSE_SEE 0x000000000000956A - MOUSE_E 0x000000000000D52A - MOUSE_NEE 0x0000000000009669 - MOUSE_NE 0x000000000000D629 - MOUSE_NNE 0x0000000000009768 - MOUSE_N 0x000000000000D728 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircmd.conf.animax deleted file mode 100644 index 09a2341..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/lircmd.conf.animax +++ /dev/null @@ -1,71 +0,0 @@ -# -# lircmd config file for the animax remote control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_N -MOVE_N ANIMAX_MOUSE_PAD MOUSE_N - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE - -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_E -MOVE_E ANIMAX_MOUSE_PAD MOUSE_E - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE - -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_S -MOVE_S ANIMAX_MOUSE_PAD MOUSE_S - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW - -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_W -MOVE_W ANIMAX_MOUSE_PAD MOUSE_W - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW - -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW - - - -BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN - -BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN -BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN - -BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP -BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/animax/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.asus deleted file mode 100644 index ceadbf0..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.asus +++ /dev/null @@ -1,56 +0,0 @@ -# -# contributed by Tibor Sipos <tibors@moravia-it.com> and -# Stefan Jahn <stefan@lkcc.org> -# -# brand: Asus -# model: Asus TV-Box Remote Control -# - -begin remote - - name Asus TV-Box IR - - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - gap 1399999 - toggle_bit 0 - - begin codes - 0 0x0000000000000000 - 1 0x0000000000000008 - 2 0x0000000000000010 - 3 0x0000000000000018 - 4 0x0000000000000020 - 5 0x0000000000000028 - 6 0x0000000000000030 - 7 0x0000000000000038 - 8 0x0000000000000040 - 9 0x0000000000000048 - PREV 0x0000000000000050 - ENTER 0x0000000000000058 - CH+ 0x0000000000000060 - CH- 0x0000000000000068 - VOL+ 0x0000000000000070 - VOL- 0x0000000000000078 - MAXIMIZE 0x0000000000000080 - MUTE 0x0000000000000088 - POWER 0x0000000000000090 - MENU 0x0000000000000098 - UP 0x00000000000000A0 - DOWN 0x00000000000000A8 - LEFT 0x00000000000000B0 - RIGHT 0x00000000000000B8 - CAPTION 0x00000000000000C0 - MTS/SAP 0x00000000000000C8 - DISPLAY 0x00000000000000D0 - SCAN 0x00000000000000D8 - RED 0x00000000000000E0 - GREEN 0x00000000000000E8 - YELLOW 0x00000000000000F0 - BLUE 0x00000000000000F8 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.digimatrix deleted file mode 100644 index a6e9abd..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/asus/lircd.conf.digimatrix +++ /dev/null @@ -1,152 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004 -# -# contributed by -# -# brand: ASUS -# model no. of remote control: DigiMatrix -# devices being controlled by this remote: -# - -begin remote - - name ASUS_DigiMatrix - bits 16 - flags SPACE_ENC - eps 30 - aeps 100 - - header 8057 4071 - one 479 1534 - zero 479 531 - ptrail 491 - pre_data_bits 8 - pre_data 0x35 - gap 25647 - toggle_bit 0 - - - begin codes - up 0x000000000000E817 - down 0x00000000000018E7 - enter 0x000000000000D02F - left 0x0000000000009867 - right 0x00000000000058A7 - 1 0x00000000000000FF - 2 0x000000000000807F - 3 0x00000000000040BF - 4 0x000000000000C03F - 5 0x00000000000020DF - 6 0x000000000000A05F - 7 0x000000000000609F - 8 0x000000000000E01F - 9 0x00000000000010EF - 0 0x000000000000906F - on_off 0x000000000000B04F - dvd_vcd 0x000000000000F00F - tv 0x00000000000008F7 - os_start 0x00000000000030CF - photo 0x00000000000048B7 - home 0x00000000000044BB - back 0x000000000000A857 - ch+ 0x000000000000B847 - stop 0x000000000000946B - play 0x000000000000C43B - vol+ 0x000000000000F807 - ch- 0x0000000000007887 - step- 0x000000000000E41B - step+ 0x000000000000649B - vol- 0x00000000000004FB - pause 0x00000000000024DB - pre 0x00000000000014EB - next 0x000000000000A45B - mute 0x000000000000847B - rec 0x000000000000D42B - subtitle 0x000000000000C837 - menu 0x00000000000038C7 - dvd_audio 0x00000000000050AF - ui_size 0x0000000000008877 - ui_on_off 0x00000000000028D7 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005 -# -# contributed by -# -# brand: ASUS -# model no. of remote control: DigiMatrix Mark 2 -# devices being controlled by this remote: -# - -begin remote - - name ASUS_DigiMatrixMk2 - bits 8 - flags SPACE_ENC - eps 30 - aeps 100 - - header 2666 1378 - one 260 741 - zero 260 279 - ptrail 251 - pre_data_bits 1 - pre_data 0x0 - post_data_bits 8 - post_data 0x3 - gap 10826 - min_repeat 1 - toggle_bit 0 - - - begin codes - power 0x0000000000000084 - tv_dvr 0x0000000000000044 - fm 0x00000000000000C4 - os_start 0x0000000000000024 - music 0x00000000000000A4 - pictures 0x0000000000000064 - video 0x00000000000000E4 - dvd_menu 0x0000000000000014 - up 0x000000000000004C - down 0x00000000000000E0 - left 0x0000000000000010 - right 0x0000000000000040 - back 0x00000000000000B4 - ok 0x0000000000000088 - back_fwd 0x0000000000000074 - rew 0x0000000000000094 - play_pause 0x0000000000000054 - fwd 0x00000000000000D4 - step- 0x0000000000000098 - stop 0x0000000000000048 - step+ 0x0000000000000090 - vol+ 0x0000000000000058 - vol- 0x00000000000000D8 - home 0x00000000000000C8 - ch+ 0x0000000000000050 - ch- 0x00000000000000D0 - mute 0x0000000000000038 - rec 0x0000000000000028 - pc 0x0000000000000030 - 1 0x00000000000000B8 - 2 0x00000000000000A8 - 3 0x00000000000000B0 - 4 0x0000000000000078 - 5 0x0000000000000068 - 6 0x0000000000000070 - 7 0x00000000000000F8 - 8 0x00000000000000E8 - 9 0x00000000000000F0 - 0 0x0000000000000018 - ui_size 0x0000000000000004 - repeat 0x0000000000000008 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/LinHES-config-SVN/templates/remotes/atiusb/lircd.conf.atiusb deleted file mode 100644 index 4953bf2..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/atiusb/lircd.conf.atiusb +++ /dev/null @@ -1,1259 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 -# -# contributed by Paul Miller <pmiller9@users.sourceforge.net> -# -# brand: ATI Remote Wonder -# model no. of remote control: 5000015900A -# devices being controlled by this remote: ATI USB Receiver -# -# CHANNEL CODES -# To change your channel, hold the hand button down until the -# LED begins to blink. Then enter the channel number -# (1 through 16) and press the hand again. -# -# NOTE!! The lirc_atiusb driver now removes the channel code -# from key-codes (by default). This effectively outputs codes -# for remote channel 1. You can change this behavior by -# loading the module with unique=1. Type `modinfo lirc_atiusb` -# for details. - -begin remote - - name ATIUSB_5000015900A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139944 - toggle_bit 0 - - - begin codes - A 0x000000000000F500 - B 0x000000000000F601 - C 0x0000000000000E19 - D 0x000000000000101B - E 0x0000000000001621 - F 0x0000000000001823 - TV 0x000000000000F803 - DVD 0x000000000000F904 - WEB 0x000000000000FA05 - BOOK 0x000000000000FB06 - HAND 0x000000000000FC07 - POWER 0x000000000000F702 - MOUSE_LEFT_BTN 0x0000000000006D78 - MOUSE_RIGHT_BTN 0x000000000000717C - MOUSE_UP 0x0000000000006772 - MOUSE_DOWN 0x0000000000006B76 - MOUSE_LEFT 0x0000000000006C77 - MOUSE_RIGHT 0x0000000000006B76 - VOL_UP 0x000000000000FD08 - VOL_DOWN 0x000000000000FE09 - MUTE 0x000000000000FF0A - CH_UP 0x000000000000000B - CH_DOWN 0x000000000000010C - 1 0x000000000000020D - 2 0x000000000000030E - 3 0x000000000000040F - 4 0x0000000000000510 - 5 0x0000000000000611 - 6 0x0000000000000712 - 7 0x0000000000000813 - 8 0x0000000000000914 - 9 0x0000000000000A15 - 0 0x0000000000000C17 - LIST 0x0000000000000B16 - CHECK 0x0000000000000D18 - UP 0x0000000000000F1A - DOWN 0x0000000000001722 - LEFT 0x000000000000121D - RIGHT 0x000000000000141F - OK 0x000000000000131E - TIMER 0x000000000000111C - MAX 0x0000000000001520 - REWIND 0x0000000000001924 - PLAY 0x0000000000001A25 - FFWD 0x0000000000001B26 - REC 0x0000000000001C27 - STOP 0x0000000000001D28 - PAUSE 0x0000000000001E29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 -# -# contributed by Jason Piterak -# -# brand: ATI -# model no. of remote control: 5000022000 -# -# devices being controlled by this remote: -# MythTV PVR using knopmyth by Cecil and Dale at -# http://mysettopbox.tv -# Key map names are as per ATI's website: -# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html -# Feel free to change them as you see fit :-) -# -# NOTE: There are 16 channels for this remote; this file only -# supports one channel. See the GATOS project for information -# on how to change the channel. Not tested. Unknown channel. -# -# also reported by Jeffrey Barnhill to work with model 5000023600 while -# the dedicated section below did not work - -begin remote - - name ATIUSB_5000022000 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0000 - gap 139891 - toggle_bit 0 - - - begin codes - a 0x000000000000C500 - b 0x000000000000C601 - power 0x000000000000C702 - tv 0x000000000000C803 - dvd 0x000000000000C904 - web 0x000000000000CA05 - media_library 0x000000000000CB06 - drag 0x000000000000CC07 - mouse-button_left 0x0000000000003D78 - mouse-button_right 0x000000000000417C - mouse-up 0x0000000000003772 - mouse-down 0x0000000000003873 - mouse-left 0x0000000000003570 - mouse-right 0x0000000000003671 - mouse-left_up 0x0000000000003974 - mouse-right_up 0x0000000000003A75 - mouse-left_down 0x0000000000003C77 - mouse-right_down 0x0000000000003B76 - vol-up 0x000000000000CD08 - vol-down 0x000000000000CE09 - mute 0x000000000000CF0A - chan-up 0x000000000000D00B - chan-down 0x000000000000D10C - 1 0x000000000000D20D - 2 0x000000000000D30E - 3 0x000000000000D40F - 4 0x000000000000D510 - 5 0x000000000000D611 - 6 0x000000000000D712 - 7 0x000000000000D813 - 8 0x000000000000D914 - 9 0x000000000000DA15 - 0 0x000000000000DC17 - dvd-root_menu 0x000000000000DB16 - launch_setup 0x000000000000DD18 - c 0x000000000000DE19 - d 0x000000000000E01B - tv_on_demand 0x000000000000E11C - max_window 0x000000000000E520 - cursor-up 0x000000000000DF1A - cursor-down 0x000000000000E722 - cursor-left 0x000000000000E21D - cursor-right 0x000000000000E41F - ok 0x000000000000E31E - e 0x000000000000E621 - f 0x000000000000E823 - rewind 0x000000000000E924 - play 0x000000000000EA25 - fast_forward 0x000000000000EB26 - record 0x000000000000EC27 - stop 0x000000000000ED28 - pause 0x000000000000EE29 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 -# -# contributed by Jurgen Kramer -# -# brand: ATI -# model no. of remote control: 5000023600 -# devices being controlled by this remote: MythTV 0.14 -# -# USB ID: 0bc7:0004 -# - -begin remote - - name ATIUSB_5000023600 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227972 - min_repeat 4 - toggle_bit 0 - - - begin codes - 1 0x000000000000920D - 2 0x000000000000930E - 3 0x000000000000940F - 4 0x0000000000009510 - 5 0x0000000000009611 - 6 0x0000000000009712 - 7 0x0000000000009813 - 8 0x0000000000009914 - 9 0x0000000000009A15 - a 0x0000000000008500 - b 0x0000000000008601 - power 0x0000000000008702 - tv 0x0000000000008803 - dvd 0x0000000000008904 - web 0x0000000000008A05 - media_library 0x0000000000008B06 - drag 0x0000000000008C07 - 0 0x0000000000009C17 - c 0x0000000000009E19 - d 0x000000000000A01B - mute 0x0000000000008F0A - tv_on_demand 0x000000000000A11C - max_window 0x000000000000A520 - e 0x000000000000A621 - f 0x000000000000A823 - ok 0x000000000000A31E - left 0x000000000000A21D - right 0x000000000000A41F - up 0x0000000000009F1A - down 0x000000000000A722 - rewind 0x000000000000A924 - play 0x000000000000AA25 - forward 0x000000000000AB26 - record 0x000000000000AC27 - stop 0x000000000000AD28 - pause 0x000000000000AE29 - mouse_button_left 0x000000000000FD78 - mouse_button_right 0x000000000000017C - vol-down 0x0000000000008E09 - vol-up 0x0000000000008D08 - chan-down 0x000000000000910C - chan-up 0x000000000000900B - mouse-up 0x000000000000F772 - mouse-down 0x000000000000F873 - mouse-left 0x000000000000F570 - mouse-right 0x000000000000F671 - mouse-left_up 0x000000000000F974 - mouse-left_down 0x000000000000FC77 - mouse-right_up 0x000000000000FA75 - mouse-right_down 0x000000000000FB76 - dvd-root_menu 0x0000000000009B16 - launch_setup 0x0000000000009D18 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 -# -# contributed by Raphaël Doursenaud (rdoursenaud@free.fr) -# -# brand: Sapphire (ATI) -# model no. of remote control: 5000023600 -# devices being controlled by this remote: xmms, tvtime -# - -begin remote - - name SAPPHIRE_ATIUSB_5000023600 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227990 - toggle_bit 0 - - - begin codes - 1 0x00000014E20D0000 - 2 0x00000014E30E0000 - 3 0x00000014E40F0000 - 4 0x00000014E5100000 - 5 0x00000014E6110000 - 6 0x00000014E7120000 - 7 0x00000014E8130000 - 8 0x00000014E9140000 - 9 0x00000014EA150000 - a 0x00000014D5000000 - b 0x00000014D6010000 - power 0x00000014D7020000 - tv 0x00000014D8030000 - dvd 0x00000014D9040000 - web 0x00000014DA050000 - media_library 0x00000014DB060000 - drag 0x00000014DC070000 - 0 0x00000014EC170000 - c 0x00000014EE190000 - d 0x00000014F01B0000 - mute 0x00000014DF0A0000 - tv_on_demand 0x00000014F11C0000 - max_window 0x00000014F5200000 - e 0x00000014F6210000 - f 0x00000014F8230000 - ok 0x00000014F31E0000 - left 0x00000014F21D0000 - right 0x00000014F41F0000 - up 0x00000014EF1A0000 - down 0x00000014F7220000 - rewind 0x00000014F9240000 - play 0x00000014FA250000 - forward 0x00000014FB260000 - record 0x00000014FC270000 - stop 0x00000014FD280000 - pause 0x00000014FE290000 - mouse_button_left 0x000000144D780000 - mouse_button_right 0x00000014517C0000 - vol-down 0x00000014DE090000 - vol-up 0x00000014DD080000 - chan-down 0x00000014E10C0000 - chan-up 0x00000014E00B0000 - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-left_up 0x0000001449740000 - mouse-left_down 0x000000144C770000 - mouse-right_up 0x000000144A750000 - mouse-right_down 0x000000144B760000 - dvd-root_menu 0x00000014EB160000 - launch_setup 0x00000014ED180000 - end codes - -end remote - - -# lircd.conf for X-10 Lola remote -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 -# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc -# -# -# brand: X-10 Lola -# model no. of remote control: UR89A -# devices being controlled by this remote: mythtv -# - -begin remote - - name X-10_Lola - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219972 - toggle_bit 0 - - - begin codes - up 0x000000000000600B - down 0x000000000000610C - left 0x0000000000005D08 - right 0x0000000000005E09 - M 0x0000000000005F0A - 1 0x000000000000620D - 2 0x000000000000630E - 3 0x000000000000640F - 4 0x0000000000006510 - 5 0x0000000000006611 - 6 0x0000000000006712 - 7 0x0000000000006813 - 8 0x0000000000006914 - 9 0x0000000000006A15 - 0 0x0000000000006C17 - a-d 0x0000000000006B16 - a-b 0x0000000000006D18 - pageup 0x000000000000711C - pagedown 0x0000000000007520 - T 0x000000000000832E - E 0x000000000000842F - F 0x0000000000005C07 - S 0x0000000000008530 - scan- 0x000000000000802B - rew 0x0000000000007924 - play 0x0000000000007A25 - ff 0x0000000000007B26 - scan+ 0x0000000000007F2A - rec 0x0000000000007C27 - stop 0x0000000000007D28 - pause 0x0000000000007E29 - playlist 0x0000000000005601 - playing 0x000000000000822D - enter 0x000000000000731E - eu 0x0000000000006F1A - ed 0x0000000000007722 - el 0x000000000000721D - er 0x000000000000741F - alb 0x0000000000006E19 - art 0x000000000000701B - gen 0x0000000000007621 - trk 0x0000000000007823 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 -# -# contributed by Julien Damon -# -# brand: microapp6in1 -# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 -# distributed in France -# model no. of remote control: 4184(UR86E) -# devices being controlled by this remote: - -# -# sold by Pearl as Q-Sonic Master Remote 6in1 PC -# - -begin remote - - name microapp6in1 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203993 - toggle_bit 0 - - - begin codes - num_1 0x00000020EE11820D - num_2 0x00000020EE11420D - num_3 0x00000020EE11C20D - num_4 0x00000020EE11220D - num_5 0x00000020EE11A20D - num_6 0x00000020EE11620D - num_7 0x00000020EE11E20D - num_8 0x00000020EE11120D - num_9 0x00000020EE11920D - num_0 0x00000020EE11020D - AV 0x00000020EE11BA05 - ok 0x00000020EE11520D - up 0x00000020EE11D50A - left 0x00000020EE11D20D - right 0x00000020EE11D10E - down 0x00000020EE11D30C - exit 0x00000020EE11C906 - menu 0x00000020EE11B609 - mute 0x00000020EE11A00F - vol+ 0x00000020EE11600F - vol- 0x00000020EE11E00F - ch+ 0x00000020EE11400F - ch- 0x00000020EE11C00F - hand 0x00000014307B0000 - skip_left 0x00000020EE113A05 - skip_right 0x00000020EE11D807 - play 0x00000020EE11B00F - backward 0x00000020EE113807 - forward 0x00000020EE11B807 - pause 0x00000020EE11720D - stop 0x00000020EE11FF00 - record 0x00000020EE11700F - clic_left 0x000000142D780000 - clic_right 0x00000014317C0000 - mouse_up 0x0000001427720000 - mouse_down 0x0000001428730000 - mouse_right 0x0000001426710000 - mouse_left 0x0000001425700000 - mouse_up_right 0x000000142A750000 - mouse_down_right 0x000000142B760000 - mouse_up_left 0x0000001429740000 - mouse_down_left 0x000000142C770000 - power 0x00000020EE11F00F -# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC - leftbtn_up 0x000000142e790000 - rightbtn_up 0x00000014327d0000 - pc 0x00000020ee11d40b - - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 -# -# contributed by Martin Tomasek <mtd@centrum.cz> -# -# brand: ATI Remote Wonder -# model no. of remote control: -# devices being controlled by this remote: ATI USB Receiver (X10). -# -# * remote is set to channel 1, driver reports channel 16. don't know -# which is true. - -# -# P: Vendor=0bc7 ProdID=0004 Rev= 1.00 -# S: Manufacturer=X10 Wireless Technology Inc -# S: Product=USB Receiver -# - -begin remote - - name atiusb_ch1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227933 - toggle_bit 0 - - - begin codes - A 0x000000000000D500 - B 0x000000000000D601 - C 0x000000000000EE19 - D 0x000000000000F01B - E 0x000000000000F621 - F 0x000000000000F823 - POWER 0x000000000000D702 - TV 0x000000000000D803 - DVD 0x000000000000D904 - WEB 0x000000000000DA05 - BOOK 0x000000000000DB06 - HAND 0x000000000000DC07 - MOUSE_LEFT_BTN 0x0000000000004D78 - MOUSE_RIGHT_BTN 0x000000000000517C - MOUSE_LEFT 0x0000000000004570 - MOUSE_RIGHT 0x0000000000004671 - MOUSE_UP 0x0000000000004772 - MOUSE_DOWN 0x0000000000004873 - VOL_UP 0x000000000000DD08 - VOL_DOWN 0x000000000000DE09 - MUTE 0x000000000000DF0A - CH_UP 0x000000000000E00B - CH_DOWN 0x000000000000E10C - 1 0x000000000000E20D - 2 0x000000000000E30E - 3 0x000000000000E40F - 4 0x000000000000E510 - 5 0x000000000000E611 - 6 0x000000000000E712 - 7 0x000000000000E813 - 8 0x000000000000E914 - 9 0x000000000000EA15 - 0 0x000000000000EC17 - LIST 0x000000000000EB16 - CHECK 0x000000000000ED18 - UP 0x000000000000EF1A - DOWN 0x000000000000F722 - LEFT 0x000000000000F21D - RIGHT 0x000000000000F41F - OK 0x000000000000F31E - TIMER 0x000000000000F11C - MAXIMIZE 0x000000000000F520 - REW 0x000000000000F924 - FFWD 0x000000000000FB26 - PLAY 0x000000000000FA25 - STOP 0x000000000000FD28 - RECORD 0x000000000000FC27 - PAUSE 0x000000000000FE29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 -# -# contributed by Phil Speights -# -# brand: nvidia -# model no. of remote control: UR88A -# devices being controlled by this remote: nvidia personal cinema -# - -begin remote - - name ATIUSB_UR88A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 243948 - toggle_bit 0 - - - begin codes - mouse-up 0x4A75 - mouse-right_up 0x4A75 - mouse-right 0x4671 - mouse-right_down 0x4B76 - mouse-down 0x4B76 - mouse-left_down 0x4873 - mouse-left 0x4C77 - mouse-left_up 0x4772 - esc 0xDF0A - mouse-button_left 0x4D78 - mouse-button_right 0x517C - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - 0 0xEC17 - stop 0xFD28 - play 0xFA25 - fastfoward 0xFB26 - rewind 0xF924 - pause 0xFE29 - record 0xFC27 - previous 0xF621 - next 0xF823 - up 0xEF1A - down 0xF722 - right 0xF41F - left 0xF21D - web 0xDC07 - music 0xDB06 - photo 0xDA05 - dvd/vcd 0xD904 - dvr 0xD803 - mute 0xD500 - playlist 0xD601 - chsurf 0xD702 - dvdmenu 0xEE19 - txt 0xEB16 - snapshots 0xED18 - setup 0xF01B - audio 0xF11C - slow 0xF520 - ok 0xF31E - vol+ 0xDE09 - vol- 0xDD08 - chan- 0xE10C - chan+ 0xE00B - zoom 0xFF2A - angle 0x002B - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 -# -# contributed by Dirk Aust -# -# brand: Medion, Made by X10, China -# Remote P/N: 20016398 -# Receiver P/N: 20016397 -# -# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC - -begin remote - - name Medion - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139873 - toggle_bit 0 - - - begin codes - TV 0x012C - VCR 0x022D - DVD 0xD904 - MUSIC 0xDB06 - RADIO 0x032E - PHOTO 0xDA05 - TV_PREVIEW 0x042F - CHANNEL_LIST 0x0530 - SETUP 0xF01B - VIDEO_DESKTOP 0x0631 - CHAN+ 0xE00B - VOL- 0xDD08 - MUTE 0xD500 - VOL+ 0xDE09 - CHAN- 0xE10C - RED 0x0732 - GREEN 0x0833 - YELLOW 0x0934 - BLUE 0x0A35 - TXT 0xEB16 - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - TV/RADIO 0xF11C - 0 0xEC17 - DELETE 0xF520 - RENAME 0x0B36 - SNAPSHOT 0xED18 - UP 0xEF1A - LEFT 0xF21D - OK 0xF31E - RIGHT 0xF41F - DOWN 0xF722 - ACQ_IMAGE 0x0C37 - EDIT_IMAGE 0x0D38 - REW 0xF924 - PLAY 0xFA25 - FFW 0xFB26 - RECORD 0xFC27 - STOP 0xFD28 - PAUSE 0xFE29 - PREV 0xF621 - FULL 0x0E39 - NEXT 0xF823 - DVD_MENU 0xEE19 - DVD_AUDIO 0x0F3A - POWER 0xD702 - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 -# -# contributed by Steffen <starv-lirc@juniks.org> -# -# brand: ATI Sapphire Remote Bob II USB -# model no. of remote control: 5000024400 -# devices being controlled by this remote: ASUS Digimatrix MythTV PVR -# - -begin remote - - name 5000024400 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x0 - post_data_bits 16 - post_data 0x0 - gap 299851 - toggle_bit 0 - - - begin codes - aux1 0x023F - aux2 0x023F - aux3 0x023F - aux4 0x023F - leftmouse 0x02A9 - rightmouse 0x02AA - a 0x0278 - b 0x0279 - power 0x020C - dvd 0x0238 - tv 0x0239 - help 0x02BE - pc 0x023F - resize 0x02D5 - hand 0x02D0 - ati 0x028E - vol-up 0x0210 - vol-down 0x0211 - mute 0x020D - chan-up 0x0220 - chan-down 0x0221 - mouse-up 0x013F - mouse-down 0x013F - mouse-left 0x013F - mouse-right 0x013F - 1 0x0201 - 2 0x0202 - 3 0x0203 - 4 0x0204 - 5 0x0205 - 6 0x0206 - 7 0x0207 - 8 0x0208 - 9 0x0209 - 0 0x0200 - list 0x0254 - check 0x0282 - info 0x02F9 - timer 0x0296 - up 0x0258 - left 0x025A - right 0x025B - down 0x0259 - ok 0x025C - c 0x017A - d 0x027B - play 0x022C - e 0x027C - f 0x027D - rewind 0x0229 - rec 0x0237 - stop 0x0231 - pause 0x0230 - ffwd 0x0228 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 -# -# contributed by -# -# brand: Niveus -# model no. of remote control: -# devices being controlled by this remote: Niveus X10 -# - -begin remote - - name Niveus_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203974 - toggle_bit 0 - - - begin codes - power 0x00000020EE11F00F - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-up-left 0x0000001449740000 - mouse-up-right 0x000000144A750000 - mouse-down-left 0x000000144C770000 - mouse-down-right 0x000000144B760000 - mouse-left-click 0x000000144D780000 - mouse-right-click 0x00000014517C0000 - mouse-drag 0x00000014507B0000 - vol- 0x00000020EE01E00F - vol+ 0x00000020EE81600F - ch- 0x00000020EEE1C00F - ch+ 0x00000020EE61400F - mute 0x00000020EEC1A00F - 1 0x00000020EEA1820D - 2 0x00000020EE61420D - 3 0x00000020EEE1C20D - 4 0x00000020EE41220D - 5 0x00000020EEC1A20D - 6 0x00000020EE81620D - 7 0x00000020EE01E20D - 8 0x00000020EE31120D - 9 0x00000020EEB1920D - ent 0x00000020EE71520D - 0 0x00000020EE21020D - a-b 0x00000020EED1BA05 - a 0x00000020EE513A05 - b 0x00000020EEF1D807 - c 0x00000020EEF1D609 - d 0x00000020EEF1D906 - menu 0x00000020EED1B609 - exit 0x00000020EEE1C906 - up 0x00000020EEF1D50A - down 0x00000020EEF1D30C - left 0x00000020EEF1D20D - right 0x00000020EEF1D10E - ok 0x00000020EE71520D - rew 0x00000020EE513807 - play 0x00000020EED1B00F - ff 0x00000020EED1B807 - rec 0x00000020EE11FF00 - stop 0x00000020EE91700F - pause 0x00000020EE91720D - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005 -# -# contributed by -# -# brand: Medion -# model no. of remote control: MD1 NBC remote -# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb -# - -begin remote - - name Medion_MD1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219994 - min_repeat 27 - toggle_bit 0 - - - begin codes - Power 0x000000000000D702 - TV 0x000000000000012C - Video 0x00000000000082AD - CD/DVD 0x000000000000D904 - Teletext 0x0000000000006B96 - Audio 0x000000000000DB06 - Radio 0x00000000000083AE - Page 0x0000000000000631 - Photo 0x0000000000005A85 - Info 0x000000000000042F - Menu 0x0000000000006E99 - Back 0x000000000000F520 - Wheel_Up 0x000000000000CDF8 - Wheel_Down 0x000000000000C7F2 - Wheel_Left 0x000000000000F21D - Wheel_Right 0x000000000000749F - Wheel_Click 0x000000000000F31E - Vol+ 0x000000000000DE09 - Vol- 0x0000000000005D88 - Mute 0x000000000000D500 - Program+ 0x000000000000608B - Program- 0x000000000000E10C - Prog_Switch 0x000000000000719C - Select 0x000000000000F01B - Red 0x00000000000087B2 - Green 0x0000000000000833 - Yellow 0x00000000000089B4 - Blue 0x0000000000000A35 - Stop 0x0000000000007DA8 - Pause 0x000000000000FE29 - Play 0x0000000000007AA5 - Skip_Left 0x000000000000F621 - Camera 0x0000000000006D98 - Skip_Right 0x000000000000F823 - Fast_Reverse 0x00000000000079A4 - Fast_Forward 0x000000000000FB26 - 1 0x000000000000628D - 2 0x000000000000E30E - 3 0x000000000000648F - 4 0x000000000000E510 - 5 0x0000000000006691 - 6 0x000000000000E712 - 7 0x0000000000006893 - 8 0x000000000000E914 - 9 0x0000000000006A95 - 0 0x000000000000EC17 - Record 0x000000000000FC27 - end codes - -end remote - - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 -# -# contributed by a_matteur -# -# brand: MEDION X10 RF -# model no. of remote control: remote P/N:20014752, receiver P/N:20014751 -# devices being controlled by this remote: -# - -begin remote - - name MEDION_X10_RF - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 235923 - toggle_bit 0 - - - begin codes - tv 0x012C - vcr 0x022D - dvd 0x0904 - music 0x0B06 - radio 0x032E - photo 0x0A05 - tvpreview 0x042F - channellist 0x0530 - setup 0x001B - videodesktop 0x0631 - ch+ 0x000B - ch- 0x010C - vol+ 0x0E09 - vol- 0x0D08 - mute 0x0500 - red 0x0732 - green 0x0833 - yellow 0x0934 - blue 0x0A35 - txt 0x0B16 - 0 0x0C17 - 1 0x020D - 2 0x030E - 3 0x040F - 4 0x0510 - 5 0x0611 - 6 0x0712 - 7 0x0813 - 8 0x0914 - 9 0x0A15 - tvradio 0x011C - delete 0x0520 - rename 0x0B36 - snapshot 0x0D18 - up 0x0F1A - down 0x0722 - left 0x021D - right 0x041F - ok 0x031E - acquireimage 0x0C37 - editimage 0x0D38 - play 0x0A25 - pause 0x0E29 - stop 0x0D28 - forward 0x0B26 - rewind 0x0924 - next 0x0823 - prev 0x0621 - record 0x0C27 - fullscreen 0x0E39 - dvdmenu 0x0E19 - dvdaudio 0x0F3A - power 0x0702 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 -# -# contributed by: Peter J. Weyers <lirc(a)usr-local.de> -# -# brand: MEDION / ATI -# model no. of remote control: 40005927 -# devices being controlled by this remote: -# -# This is an USB attached reciever wich works by radio, not by IR. It is -# most probably a relabeled ATI X10 device and sold together with the -# Medion Notebook MD41300. It works with the lirc_atiusb driver while the -# ati_remote module is NOT(!) loaded - -begin remote - - name MEDION_40005927 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227972 - toggle_bit 0 - - - begin codes - TV_DVD 0x1481AC0000 - VIDEO 0x1482AD0000 - PHOTO 0x1459840000 - MUSIC 0x145B860000 - PC 0x1483AE0000 - MUTE 0x1455800000 - OK 0x14739E0000 - UP 0x146F9A0000 - DOWN 0x1477A20000 - LEFT 0x14729D0000 - RIGHT 0x14749F0000 - CH+ 0x145E890000 - CH- 0x145D880000 - VOL+ 0x14608B0000 - VOL- 0x14618C0000 - PLAY_PAUSE 0x147AA50000 - RECORD 0x147CA70000 - STOP 0x147DA80000 - FRWND 0x1479A40000 - FFWD 0x147BA60000 - PREV 0x1476A10000 - NEXT 0x1478A30000 - 1 0x14628D0000 - 2 0x14638E0000 - 3 0x14648F0000 - 4 0x1465900000 - 5 0x1466910000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x1469940000 - 9 0x146A950000 - 0 0x146C970000 - RC 0x1484AF0000 - Screen_Symbol 0x146B960000 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006 -# -# contributed by -# -# brand: Medion USB Remote Control X10 -# model no. of remote control: 40009936 -# devices being controlled by this remote: -# - -begin remote - - name Medion_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 219969 - toggle_bit 0 - - - begin codes - off 0x14D7020000 - tv 0x14012C0000 - video 0x1482AD0000 - dvd 0x14D9040000 - vt 0x146B960000 - audio 0x14DB060000 - radio 0x1483AE0000 - book 0x1406310000 - photo 0x145A850000 - info 0x14042F0000 - 0 0x146C970000 - 1 0x14E20D0000 - 2 0x14638E0000 - 3 0x14E40F0000 - 4 0x1465900000 - 5 0x14E6110000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x14E9140000 - 9 0x146A950000 - ok 0x14F31E0000 - up 0x14CDF80000 - down 0x1446710000 - left 0x14F21D0000 - right 0x14749F0000 - menu 0x14EE190000 - back 0x1475A00000 - red 0x1407320000 - green 0x1488B30000 - yellow 0x1409340000 - blue 0x148AB50000 - mute 0x14D5000000 - ch+ 0x14608B0000 - ch- 0x14E10C0000 - vol+ 0x145E890000 - vol- 0x14DD080000 - switch 0x14719C0000 - stop 0x14FD280000 - pause 0x147EA90000 - play 0x14FA250000 - reward 0x1476A10000 - forward 0x14F8230000 - skipr 0x1479A40000 - skipf 0x14FB260000 - rec 0x147CA70000 - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia deleted file mode 100644 index 7091aa4..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia +++ /dev/null @@ -1,72 +0,0 @@ -# -# This is for the remote that Avermedia bundles with its TVCapture and -# TVPhone, the classic ones (pre 98). -# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes -# lirc's job easy. You need at least lirc-0.6.3 to use this config file -# -# this config file was automatically generated -# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001 -# -# contributed by Santiago Garcia Mantinan <manty@i.am> -# -# brand: Avermedia -# model: TVCapture & TVPhone, the classic ones (pre 98) -# supported devices: This remote control comes with some TV Tuner cards from -# Avermedia. - -begin remote - - name Avermedia - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8984 4527 - one 568 1681 - zero 568 558 - ptrail 547 - repeat 8985 2276 - pre_data_bits 16 - pre_data 0x2FD - gap 108069 - toggle_bit 0 - - - begin codes - TV 0x0000000000006897 - FM 0x000000000000A857 - EXIT 0x00000000000048B7 - DISPLAY 0x00000000000030CF - FREEZE 0x00000000000028D7 - CAPTURE 0x0000000000008877 - VIDEO 0x00000000000038C7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - AUDIO 0x00000000000018E7 - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - FULLSCREEN 0x000000000000F00F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - LOOP 0x000000000000C837 - 0 0x00000000000050AF - LEFTARROW 0x00000000000000FF - RIGHTARROW 0x000000000000E817 - MUTE 0x00000000000008F7 - COLOR 0x000000000000B04F - PREVIEW 0x000000000000708F - CHANNELUP 0x000000000000D827 - VOL_UP 0x00000000000058A7 - AUTOSCAN 0x000000000000B847 - ENTER 0x0000000000009867 - CHANNELDOWN 0x000000000000F807 - VOL_DOWN 0x0000000000007887 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia98 deleted file mode 100644 index f60ee50..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.avermedia98 +++ /dev/null @@ -1,175 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5 on Thu May 25 18:00:24 2000 -# -# contributed by Michal Kochanowicz & Jesus Bravo Alvarez -# -# brand: AVerMedia -# model: ? -# supported devices: some TVCapture98 (ID 0x00021461) and -# some TVPhone98 (ID 0x00011461) cards - -begin remote - - name TVCapture98 - bits 6 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 -# pre_data_bits 16 -# pre_data 0x40BF - repeat 9080 2189 - gap 108056 - repeat_bit 0 - - begin codes - TV/FM 0x0000000000000023 - CD 0x0000000000000022 -# TELETEXT 0x000000000000C03F - POWER 0x0000000000000027 - - 1 0x0000000000000018 - 2 0x0000000000000010 - 3 0x0000000000000008 - VIDEO 0x0000000000000000 - - 4 0x0000000000000019 - 5 0x0000000000000011 - 6 0x0000000000000009 - AUDIO 0x0000000000000001 - - 7 0x000000000000001A - 8 0x0000000000000012 - 9 0x000000000000000A - FULLSCREEN 0x0000000000000002 - - 0 0x000000000000001B - DISPLAY 0x0000000000000013 - COLOR 0x000000000000000B - LOOP 0x0000000000000003 - - UNLABELED 0x000000000000001C - LEFT 0x0000000000000014 - RIGHT 0x000000000000000C - PREVIEW 0x0000000000000004 - - AUTOSCAN 0x000000000000001D - FREEZE 0x0000000000000015 - CAPTURE 0x000000000000000D - MUTE 0x0000000000000005 - - RED 0x000000000000001E - VOL_DOWN 0x0000000000000016 - VOL_UP 0x000000000000000E - YELLOW 0x0000000000000006 - - GREEN 0x000000000000001F - CH_DOWN 0x0000000000000017 - CH_UP 0x000000000000000F - BLUE 0x0000000000000007 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 -# -# contributed by Christoph Bartelmus <lirc@bartelmus.de> -# -# brand: AVerMedia -# model: ? (36 buttons) -# supported devices: TVPhone98 card (ID 0x00031461) -# TVCapture98 card (ID 0x00041461) -# -# This config file does work with both homebrew receivers and -# original AVerMedia TV cards !!! -# - -begin remote - - name TVPhone98 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0x40BF - gap 108056 - repeat_bit 0 - - begin codes - POWER 0x00000000000000FF - TV/FM 0x000000000000807F - CD 0x00000000000040BF - TELETEXT 0x000000000000C03F - VIDEO 0x00000000000020DF - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - AUDIO 0x00000000000010EF - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - FULLSCREEN 0x00000000000030CF - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - - PREVIEW 0x00000000000008F7 - 0 0x0000000000008877 - DISPLAY 0x00000000000048B7 - LOOP 0x000000000000C837 - MUTE 0x00000000000028D7 - AUTOSCAN 0x000000000000A857 - FREEZE 0x0000000000006897 - CAPTURE 0x000000000000E817 - PLAY 0x00000000000018E7 - RECORD 0x0000000000009867 - PAUSE 0x00000000000058A7 - STOP 0x000000000000D827 - YELLOW 0x00000000000038C7 - RED 0x000000000000B847 - VOL_DOWN 0x0000000000007887 - VOL_UP 0x000000000000F807 - end codes - -end remote - -begin remote - - name TVPhone98_ext - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0xC03F - gap 108056 - repeat_bit 0 - - begin codes - BLUE 0x00000000000000FF - GREEN 0x000000000000807F - CH_DOWN 0x00000000000040BF - CH_UP 0x000000000000C03F - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.vdomate deleted file mode 100644 index 36b1c6b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircd.conf.vdomate +++ /dev/null @@ -1,61 +0,0 @@ -# -# this config file was automatically generated -# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002 -# -# contributed by -# -# brand: AVerMedia -# model: -# supported devices: VDOMATE (ID 0x3001461) -# - -begin remote - - name hanircd - bits 32 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9086 4425 - one 625 1624 - zero 625 500 - ptrail 624 - repeat 9087 2185 - gap 107977 - toggle_bit 0 - - - begin codes - power 0x0000000040BF00FF - one 0x0000000040BFA05F - two 0x0000000040BF609F - three 0x0000000040BFE01F - four 0x0000000040BF906F - five 0x0000000040BF50AF - six 0x0000000040BFD02F - seven 0x0000000040BFB04F - eight 0x0000000040BF708F - nine 0x0000000040BFF00F - zero 0x0000000040BF8877 - video 0x0000000040BF20DF - fullscreen 0x0000000040BF30CF - display 0x0000000040BF48B7 - color 0x0000000040BFC837 - loop 0x0000000040BF08F7 - coloup 0x0000000040BF6897 - colordn 0x0000000040BFE817 - preview 0x0000000040BF28D7 - autoscan 0x0000000040BF9867 - freeze 0x0000000040BF58A7 - capture 0x0000000040BFD827 - mute 0x0000000040BF18E7 - volumeup 0x0000000040BF7887 - volumedown 0x0000000040BFF807 - chnldown 0x00000000C03F40BF - chnlup 0x00000000C03FC03F - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia deleted file mode 100644 index e950862..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -#PROTOCOL IntelliMouse -PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * FM - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOLUP -MOVE_OUT * VOLDOWN - -BUTTON1_CLICK * DISPLAY -BUTTON2_CLICK * FREEZE -BUTTON3_CLICK * CAPTURE - -BUTTON1_TOGGLE * AUDIO -BUTTON2_TOGGLE * FULLSCREEN -BUTTON3_TOGGLE * LOOP diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia98 deleted file mode 100644 index 2885372..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/lircmd.conf.avermedia98 +++ /dev/null @@ -1,37 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -# ACTIVATE * MENUE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_UP -MOVE_OUT * VOL_DOWN - -BUTTON1_DOWN * 5 -BUTTON1_UP * 0 - -BUTTON1_DOWN * TV/FM -BUTTON2_DOWN * CD -BUTTON3_DOWN * TELETEXT -BUTTON1_CLICK * DISPLAY -BUTTON3_CLICK * LOOP - -BUTTON1_TOGGLE * VIDEO -BUTTON2_TOGGLE * AUDIO -BUTTON3_TOGGLE * FULLSCREEN diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/avermedia/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy deleted file mode 100644 index 1fd689f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy +++ /dev/null @@ -1,63 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001 -# -# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> -# -# brand: BESTBUY -# model: Easy TV (BT848) -# supported devices: -# - -begin remote - - name BESTBUY - bits 5 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 3 - pre_data 0x0 -# gap 149990 - gap 199989 - toggle_bit 2 - - - begin codes - 0 0x0000000000000000 - 1 0x0000000000000001 - 2 0x0000000000000002 - 3 0x0000000000000003 - 4 0x0000000000000004 - 5 0x0000000000000005 - 6 0x0000000000000006 - 7 0x0000000000000007 - 8 0x0000000000000008 - 9 0x0000000000000009 - TV 0x000000000000001C - POWER 0x0000000000000012 - VIDEO 0x0000000000000011 - PREVIEW 0x000000000000000F - MUTE 0x0000000000000013 - SCAN 0x0000000000000010 - CHANNEL_UP 0x000000000000001A - CHANNEL_DOWN 0x000000000000001E - VOL_UP 0x000000000000001B - VOL_DOWN 0x000000000000001F - LOOP 0x000000000000000A - 100 0x0000000000000017 - ZOOM 0x000000000000000D - RECORD 0x000000000000000E - STOP 0x000000000000001D - PLAY 0x0000000000000019 - FREEZE 0x0000000000000016 - COLOR 0x0000000000000014 - LEFT 0x0000000000000018 - RIGHT 0x000000000000000C - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy2 deleted file mode 100644 index 77e87e3..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircd.conf.bestbuy2 +++ /dev/null @@ -1,59 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001 -# -# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> -# -# brand: BESTBUY -# model: EASY TV (BT878) -# supported devices: -# - -begin remote - - name BESTBUY - bits 7 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 1 - pre_data 0x0 - gap 199981 - toggle_bit 0 - - - begin codes - TV/FM 0x0000000000000043 - SCAN 0x0000000000000047 - ZOOM 0x000000000000005C - POWER 0x000000000000005E - 1 0x0000000000000041 - 2 0x000000000000004B - 3 0x000000000000005B - VOL+ 0x000000000000005F - 4 0x0000000000000045 - 5 0x0000000000000049 - 6 0x0000000000000055 - VOL- 0x0000000000000057 - 7 0x0000000000000046 - 8 0x000000000000004A - 9 0x0000000000000052 - CH+ 0x0000000000000056 - 0 0x0000000000000042 - LOOP 0x0000000000000053 - +100 0x0000000000000050 - CH- 0x0000000000000054 - SOURCE 0x0000000000000040 - MUTE 0x0000000000000058 - - 0x0000000000000044 - FUNCTION 0x000000000000004E - + 0x000000000000004C - RESET 0x000000000000004D - FREEZE 0x000000000000004F - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy deleted file mode 100644 index e57d11f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CHANNEL_UP -MOVE_OUT * CHANNEL_DOWN - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * ZOOM -BUTTON2_TOGGLE * RECORD -BUTTON3_TOGGLE * STOP - -BUTTON1_CLICK * POWER -BUTTON2_CLICK * TV -BUTTON3_CLICK * SCAN - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy2 deleted file mode 100644 index c515058..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/bestbuy/lircmd.conf.bestbuy2 +++ /dev/null @@ -1,34 +0,0 @@ -# -# lircmd config file -# - -#PROTOCOL IntelliMouse -PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * PLAY - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * FUNCTION -BUTTON2_TOGGLE * - -BUTTON3_TOGGLE * + - -BUTTON1_CLICK * TV/FM -BUTTON2_CLICK * SCAN -BUTTON3_CLICK * ZOOM - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircd.conf.caraca deleted file mode 100644 index c1a0fa1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircd.conf.caraca +++ /dev/null @@ -1,46 +0,0 @@ -# -# -# contributed by Konrad Riedel <k.riedel@gmx.de> -# -# brand: CARACA -# model: RC5 Remote Control -# -# supported devices: -# CARACA nodes - see http://caraca.sourceforge.net -# first byte: node address -# 2nd byte: ir code -# - -begin remote - - name Caraca - bits 16 - - begin codes - POWER 0x3ff3 - 1 0x3ffe - 2 0x3ffd - 3 0x3ffc - 4 0x3ffb - 5 0x3ffa - 6 0x3ff9 - 7 0x3ff8 - 8 0x3ff7 - 9 0x3ff6 - 0 0x3ff5 - PAUSE 0x3fcf - EJECT 0x3fe2 - SEEK- 0x3fcd - PLAY 0x3fca - SEEK+ 0x3fcb - RECORD 0x3fd2 - STOP 0x3fc9 - CH- 0x3fde - CH+ 0x3fdf - VOL- 0x3fee - VOL+ 0x3fef - MUTE 0x3ff2 - TV/FM 0x3fe3 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircrc.caraca deleted file mode 100644 index 6baf5e4..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/lircrc.caraca +++ /dev/null @@ -1,134 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Konrad Riedel <k.riedel@gmx.de> -# -begin - prog = irexec - button = tv/fm - config = xawtv -geometry +64+64 & - mode = tv - flags = once -end - -begin tv - begin - prog = xawtv - button = power - config = quit - flags = mode - end - begin - prog = xawtv - button = source - repeat = 1 - config = setinput next - end - begin - prog = xawtv - button = zoom - repeat = 1 - config = fullscreen - end - begin - prog = xawtv - button = ch- - repeat = 1 - config = setstation prev - end - begin - prog = xawtv - button = ch+ - repeat = 1 - config = setstation next - end - begin - prog = xawtv - button = record - repeat = 1 - #config = snap jpeg - config = quit - end - begin - prog = xawtv - button = scan - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = xawtv - button = MUTE - config = volume mute - end -end tv -begin - prog = irexec - button = power - config = xmms& - mode = xmms - flags = once -end - -begin xmms - begin - prog = xmms - button = play - config = PLAY - end - begin - prog = xmms - button = pause - config = PAUSE - end - begin - prog = xmms - button = stop - config = STOP - end - begin - prog = xmms - button = vol- - repeat = 1 - config = VOL_DOWN - end - begin - prog = xmms - button = vol+ - repeat = 1 - config = VOL_UP - end - - begin - prog = xmms - button = power - config = QUIT - flags = mode - end - begin - prog = xmms - button = mute - config = MUTE - end - begin - prog = xmms - button = seek+ - repeat = 1 - config = FWD - end - begin - prog = xmms - button = seek- - repeat = 1 - config = BWD - end - begin - prog = xmms - button = ch+ - config = NEXT - end - begin - prog = xmms - button = ch- - config = PREV - end -end xmms diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/caraca/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/LinHES-config-SVN/templates/remotes/chronos/lircd.conf.chronos deleted file mode 100644 index 764506c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/chronos/lircd.conf.chronos +++ /dev/null @@ -1,56 +0,0 @@ - -# -# This config file is for remote that comes with cheap TV Card made by -# Chronos. -# -# contributed by Tõnu Raitviir <jussuf@bumpclub.ee> -# -# brand: Chronos Video Shuttle II -# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23) -# - -begin remote - - name Chronos - bits 5 - eps 30 - aeps 100 - - gap 199766 - toggle_bit 0 - - begin codes - POWER 0x0000000000000000 - MOUSE_MODE 0x0000000000000010 - FULL_SCREEN 0x0000000000000008 - CH+ 0x0000000000000009 - CH- 0x0000000000000019 - 1 0x0000000000000018 - 2 0x0000000000000004 - 3 0x0000000000000014 - 4 0x000000000000001C - 5 0x0000000000000002 - 6 0x0000000000000012 - 7 0x000000000000001A - 8 0x0000000000000006 - 9 0x0000000000000016 - 0 0x000000000000001E - VOL+ 0x0000000000000005 - VOL- 0x000000000000001D - SOURCE 0x0000000000000003 - MUTE 0x000000000000001B - AUDIO 0x0000000000000015 - VIDEO 0x0000000000000011 - CANCEL 0x000000000000001F - ENTER 0x0000000000000001 - ESC 0x000000000000000B - RECALL 0x000000000000000C - AIR_CATV 0x000000000000000E - INC 0x000000000000000A - DEC 0x000000000000000D - BOX 0x0000000000000017 - DOWN_ARROW 0x0000000000000013 - LEFT_ARROW_TERM 0x000000000000000F - RIGHT_ARROW_TERM 0x0000000000000007 - end codes -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/LinHES-config-SVN/templates/remotes/cph03x/lircd.conf.cph03x deleted file mode 100644 index 62f711e..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/cph03x/lircd.conf.cph03x +++ /dev/null @@ -1,72 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000 -# -# contributed by Claas Langbehn <claas@bigfoot.com> -# Please read the documentation, faq etc. -# before sending me mails. -# -# brand: ASKEY -# model: AS-218 / AS-220 -# supported devices: ASKEY MagicTV -# -# comment: repeated keys are recognized, now. -# - -begin remote - - name AS-218 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9087 4424 - one 629 1617 - zero 629 495 - ptrail 632 - repeat 9088 2182 - pre_data_bits 16 - pre_data 0x61D6 - gap 107905 - repeat_bit 0 - - begin codes - 0 0x00000000000000FF - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - LOOP 0x00000000000050AF -# unused - FINE_UP(PLUS) 0x00000000000030CF - ZOOM 0x000000000000B04F - RECORD 0x000000000000708F - PREVIEW 0x000000000000F00F - - SCAN 0x00000000000008F7 - VIDEO 0x0000000000008877 - POWER 0x00000000000048B7 - MUTE 0x000000000000C837 - COLOR 0x00000000000028D7 -#unused - FREEZE 0x0000000000006897 - 100 0x000000000000E817 - FINE_DOWN(MINUS) 0x00000000000018E7 - PLAY 0x0000000000009867 - CH_UP 0x00000000000058A7 - VOL_UP 0x000000000000D827 - TV 0x00000000000038C7 - STOP 0x000000000000B847 - CH_DOWN 0x0000000000007887 - VOL_DOWN 0x000000000000F807 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.alsa_usb deleted file mode 100644 index e84a68b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.alsa_usb +++ /dev/null @@ -1,56 +0,0 @@ -# -# contributed by Clemens Ladisch <clemens|ladisch.de> -# -# brand: Creative -# model: RM-1500 -# supported devices: Sound Blaster Extigy, SB Audigy 2 NX -# -# This is for the integrated IR receiver in Creative USB audio devices -# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio -# driver from ALSA 1.0.9 or later). -# -# This file should work with the exaudio driver, too. -# - -begin remote - - name RM-1500 - bits 8 - - begin codes - power 0x01 - 1 0x02 - 2 0x03 - 3 0x04 - 4 0x05 - 5 0x06 - 6 0x07 - 7 0x08 - 8 0x09 - 9 0x0a - 0 0x0b - cmss 0x0c - mute 0x0d - rec 0x0e - vol- 0x0f - vol+ 0x10 - stop-eject 0x11 - play-pause 0x12 - slow 0x13 - prev 0x14 - next 0x15 - step 0x16 - eax 0x17 - options 0x18 - display 0x19 - return 0x1a - start 0x1b - cancel 0x1c - up 0x1d - left 0x1e - ok 0x1f - right 0x20 - down 0x21 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.breakoutbox deleted file mode 100644 index c5d2d9c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.breakoutbox +++ /dev/null @@ -1,55 +0,0 @@ -# -# contributed by Juergen Jaeschke <jaeschke.privat@gmx.de> -# -# brand: Creative -# model: Creative BreakOut-Box Remote Control -# - -begin remote - - name Creative BreakOut-Box IR - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - gap 199984 - toggle_bit 0 - - begin codes - DVD/CD 0x0000000000000001 - DVR/TV 0x0000000000000000 - MENU 0x0000000000000003 - LANG 0x0000000000000005 - PLAYLIST 0x0000000000000011 - BACKWARD 0x000000000000000A - PLAY 0x0000000000000008 - FORWARD 0x000000000000000F - LAST 0x0000000000000002 - STOP 0x0000000000000007 - NEXT 0x0000000000000006 - MUTE 0x0000000000000014 - STEP 0x0000000000000009 - UP 0x000000000000000C - LEFT 0x000000000000000B - RIGHT 0x000000000000000D - DOWN 0x000000000000000E - VOL+ 0x0000000000000012 - VOL- 0x0000000000000015 - OK 0x0000000000000011 - ANGLE+ 0x0000000000000010 - ANGLE- 0x0000000000000013 - REC 0x0000000000000004 - 1 0x0000000000000016 - 2 0x0000000000000017 - 3 0x0000000000000018 - 4 0x0000000000000019 - 5 0x000000000000001A - 6 0x000000000000001B - 7 0x000000000000001C - 8 0x000000000000001D - 9 0x000000000000001E - 0 0x000000000000001F - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.creative deleted file mode 100644 index 69f3d27..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.creative +++ /dev/null @@ -1,59 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001 -# -# contributed by Stephen White <stephen@earth.li> -# -# brand: Creative -# model: PC-DVD Remote -# supported devices: Creative-Infra-Receiver -# - -begin remote - - name CREATIVE_INFRA_DVD - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9293 4302 - one 771 1494 - zero 771 358 - ptrail 756 - pre_data_bits 16 - pre_data 0x8435 - gap 108646 - toggle_bit 0 - - begin codes - play 0x00000000000005FA - stop 0x00000000000016E9 - pause 0x00000000000000FF - eject 0x00000000000002FD - last 0x00000000000017E8 - rrev 0x00000000000004FB - ffwd 0x00000000000006F9 - next 0x00000000000001FE - 1 0x00000000000008F7 - 2 0x00000000000009F6 - 3 0x0000000000000AF5 - shift 0x00000000000014EB - 4 0x0000000000000CF3 - 5 0x0000000000000DF2 - 6 0x0000000000000EF1 - mouse 0x00000000000007F8 - 7 0x00000000000010EF - 8 0x00000000000011EE - 9 0x00000000000012ED - vol+ 0x0000000000000FF0 - start 0x00000000000003FC - 0 0x00000000000015EA - mute 0x0000000000000BF4 - vol- 0x00000000000013EC - end codes - -end remote - - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.infracd deleted file mode 100644 index cdaaad9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.infracd +++ /dev/null @@ -1,61 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001 -# -# contributed by -# -# brand: Creative -# model: CD-Rom Creditcard-sized IR-Controller -# supported devices: CD-Rom -# - -begin remote - - name CREATIVE_INFRA - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9051 4625 - one 534 1707 - zero 534 588 - ptrail 490 - repeat 9039 2363 - pre_data_bits 16 - pre_data 0x8435 - gap 108434 - min_repeat 1 - toggle_bit 0 - - - begin codes - PAUSE 0x00000000000001FE - PLAY 0x00000000000002FD - STOP 0x00000000000003FC - REW 0x00000000000005FA - PREV 0x00000000000006F9 - FF 0x00000000000007F8 - MENU 0x00000000000004FB - MOUSE 0x00000000000008F7 - 1 0x00000000000009F6 - 2 0x0000000000000AF5 - 3 0x0000000000000BF4 - 4 0x0000000000000DF2 - 5 0x0000000000000EF1 - 6 0x0000000000000FF0 - 7 0x00000000000011EE - 8 0x00000000000012ED - 9 0x00000000000013EC - 0 0x00000000000016E9 - MUTE 0x0000000000000CF3 - VOL_UP 0x00000000000010EF - VOL_DOWN 0x00000000000014EB - SHIFT 0x00000000000015EA - ENTER 0x00000000000017E8 - ZOOM 0x00000000000018E7 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.livedrive deleted file mode 100644 index b68e5c4..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/creative/lircd.conf.livedrive +++ /dev/null @@ -1,115 +0,0 @@ -# -# contributed by Andrew de Quincey -# -# brand: rm1000w -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name rm1000w - flags SPACE_ENC|CONST_LENGTH - bits 16 - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - pre_data_bits 16 - pre_data 0x8322 - gap 108000 - toggle_bit 0 - - repeat 9000 2250 - - frequency 38000 - duty_cycle 33 - - - begin codes - 1 0x0000000000008B74 - 2 0x0000000000008F70 - 3 0x000000000000906F - 4 0x0000000000008A75 - 5 0x000000000000847B - 6 0x0000000000007887 - 7 0x0000000000008976 - 8 0x000000000000837C - 9 0x0000000000007788 - 0 0x000000000000807F - stop 0x000000000000857A - play 0x0000000000007986 - pause 0x0000000000007986 - slow 0x0000000000007D82 - step 0x0000000000007E81 - prev 0x0000000000007F80 - next 0x0000000000007A85 - mute 0x0000000000006E91 - vol- 0x000000000000639C - vol+ 0x000000000000629D - eax 0x0000000000008C73 - options 0x000000000000827D - display 0x0000000000007689 - return 0x0000000000008E71 - start 0x0000000000008877 - close 0x0000000000007C83 - up 0x0000000000007B84 - down 0x0000000000008D72 - left 0x0000000000008778 - right 0x000000000000758A - ok 0x000000000000817E - power 0x000000000000619e - cmss 0x000000000000718e - record 0x000000000000738c - - end codes - -end remote - -# -# contributed by Stefan Brüns -# -# brand: Creative Audigy 2 ZS Platinum LiveDrive -# model no. of remote control: -# devices being controlled by this remote: -# - - -begin remote - - - name LiveDrive - flags SPACE_ENC|CONST_LENGTH - bits 16 - eps 30 - aeps 100 - - - header 9000 4500 - one 563 1687 - zero 563 562 - pre_data_bits 16 - pre_data 0x8000 - gap 108000 - toggle_bit 0 - - - repeat 9000 2250 - - - frequency 38000 - duty_cycle 33 - - - - - begin codes - mute 0x0000000000000040 - vol+ 0x0000000000008080 - vol- 0x0000000000008082 - cmss 0x0000000000000080 - end codes -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/lircd.conf.fusionHDTV deleted file mode 100644 index fbc91a8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/lircd.conf.fusionHDTV +++ /dev/null @@ -1,221 +0,0 @@ -# -# contributed by Chris Pascoe -# -# brand: DVICO -# model no. of remote control: DVB-T -# devices being controlled by this remote: -# - -begin remote - - name DVICO - bits 32 - eps 0 - aeps 0 - - one 0 0 - zero 0 0 - pre_data_bits 32 - pre_data 0x10046 - gap 195755 - post_data_bits 0 - toggle_bit 0 - - begin codes - 1 0x00000000000011F9 - 2 0x00000000000012F9 - 3 0x00000000000013F9 - 4 0x00000000000014F9 - 5 0x00000000000015F9 - 6 0x00000000000016F9 - 7 0x00000000000017F9 - 8 0x00000000000018F9 - 9 0x00000000000019F9 - 0 0x00000000000010F9 - power 0x0000000000000AF9 - pcoff 0x0000000000000CF9 - camera 0x0000000000001AF9 - record 0x0000000000001BF9 - chup 0x00000000000000F9 - chdown 0x00000000000001F9 - volup 0x00000000000002F9 - voldown 0x00000000000003F9 - playpause 0x0000000000001FF9 - rew 0x0000000000001CF9 - stop 0x0000000000001EF9 - ff 0x0000000000001DF9 - folder 0x00000000000040F9 - atvdtv 0x00000000000006F9 - dvhs 0x00000000000041F9 - menu 0x00000000000008F9 - aspect 0x00000000000007F9 - zoom 0x00000000000004F9 - epg 0x0000000000000BF9 - mute 0x0000000000000DF9 - back 0x0000000000000EF9 - hd 0x0000000000000FF9 - red 0x00000000000005F9 - green 0x00000000000009F9 - yellow 0x00000000000042F9 - blue 0x00000000000043F9 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005 -# -# contributed by anonymous -# -# brand: DVICO -# model no. of remote control: MCE Remote -# - -begin remote - - name DVICO_MCE - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x0 - post_data_bits 8 - post_data 0x0 - gap 195956 - toggle_bit 0 - - - begin codes - ok 0x0000000000FE5E00 - dtv 0x0000000000FE0200 - mp3 0x0000000000FE0E00 - dvd 0x0000000000FE1A00 - cpf 0x0000000000FE1E00 - setup 0x0000000000FE1600 - tv_onoff 0x0000000000FE4600 - guide 0x0000000000FE0A00 - back 0x0000000000FE4900 - more 0x0000000000FE5900 - dvd_menu 0x0000000000FE4D00 - alt_tab 0x0000000000FE5500 - replay 0x0000000000FE0F00 - skip 0x0000000000FE1200 - up 0x0000000000FE5100 - down 0x0000000000FE5300 - left 0x0000000000FE5B00 - right 0x0000000000FE5F00 - start 0x0000000000FE4200 - vol_up 0x0000000000FE1500 - vol_down 0x0000000000FE0500 - ch_up 0x0000000000FE1100 - ch_down 0x0000000000FE0900 - snapshot 0x0000000000FE5200 - live 0x0000000000FE5A00 - folder_open 0x0000000000FE1900 - 1 0x0000000000FE0B00 - 2 0x0000000000FE1700 - 3 0x0000000000FE1B00 - 4 0x0000000000FE0700 - 5 0x0000000000FE5000 - 6 0x0000000000FE5400 - 7 0x0000000000FE4800 - 8 0x0000000000FE4C00 - 9 0x0000000000FE5800 - 0 0x0000000000FE0300 - aspect 0x0000000000FE1300 - fullscreen 0x0000000000FE1F00 - rewind 0x0000000000FE4300 - playpause 0x0000000000FE4700 - fastforward 0x0000000000FE4F00 - stop 0x0000000000FE0D00 - mute 0x0000000000FE5700 - record 0x0000000000FE0100 - white_onoff 0x0000000000FE4E00 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005 -# -# contributed by: David Bussenschutt <buzz|oska.com> -# -# brand: "DViCO" -# model no. of remote control: "Fusion Remote MCE" -# devices being controlled by this remote: My MythTV install -# - -begin remote - - name DVICO_MCE - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 48 - pre_data 0x100460000 - post_data_bits 8 - post_data 0xFE - gap 195843 - toggle_bit 0 - - - begin codes - ok 0x5e - up 0x51 - down 0x53 - left 0x5B - right 0x5F - setup 0x16 - tv_onoff 0x46 - guide 0x0A - dtv 0x02 - mp3 0x0E - dvd 0x1A - cpf 0x1E - back 0x49 - more 0x59 - dvd_menu 0x4D - alt_tab 0x55 - replay 0x0F - skip 0x12 - start 0x42 - vol_up 0x15 - vol_down 0x05 - ch_up 0x11 - ch_down 0x09 - photo 0x52 - live 0x5A - folder 0x19 - 1 0x0B - 2 0x17 - 3 0x1B - 4 0x07 - 5 0x50 - 6 0x54 - 7 0x48 - 8 0x4C - 9 0x58 - 0 0x03 - ratio 0x13 - zoom 0x1F - rew 0x43 - playpause 0x47 - ff 0x4F - mute 0x57 - stop 0x0D - rec 0x01 - power_onoff 0x4e - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/dvico/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircd.conf.ea65 deleted file mode 100644 index a10181d..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircd.conf.ea65 +++ /dev/null @@ -1,73 +0,0 @@ -# -# Config file for AOpen XC Cube EA65, EA65-II -# Max Krasnyanskiy <maxk@qualcomm.com> -# - -begin remote - name EA65 - bits 24 - eps 10 - aeps 100 - - gap 960000 - toggle_bit 0 - - begin codes - tv/pvr 0x0014814c - photo 0x0017810e - htpc 0x0011811b - dvd/vcd 0x00128100 - cd/mp3 0x00138152 - fm 0x00158111 - video 0x0016810f - - 1 0x0041810b - 2 0x00428115 - 3 0x00438112 - 4 0x00448141 - 5 0x00458119 - 6 0x00468116 - 7 0x00478150 - 8 0x0048811a - 9 0x00498155 - * 0x00328156 - 0 0x00408158 - # 0x0030814d - - menu 0x00188104 - exit 0x001d8154 - enter 0x001e8101 - up 0x00198159 - down 0x001a811c - left 0x001c8102 - right 0x001b815d - - vol+ 0x00298103 - vol- 0x002a814e - ch+ 0x002c8113 - ch- 0x002d8117 - mute 0x00288105 - tune+ 0x002e8144 - tune- 0x002f8148 - mem 0x00318145 - scan 0x00278151 - - display 0x0034811f - eject 0x0035815c - rwnd 0x00228118 - ffwd 0x00218110 - rec 0x002b810a - repeate 0x0038815a - prev 0x00238107 - next 0x00248114 - time/shift 0x00338108 - stop 0x0020811d - play/pause 0x001f8109 - - play-pause 0x0080811d - stop-eject 0x00238107 - mode- 0x00ff1080 - mode+ 0x00ff1180 - end codes -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircrc.ea65 deleted file mode 100644 index fd96d42..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/lircrc.ea65 +++ /dev/null @@ -1,381 +0,0 @@ -# -# Max Krasnyanskiy <maxk@qualcomm.com> -# - -# -# Xine key bindings. -# - -# start playback -begin - button = dvd/vcd - prog = xine - repeat = 1 - config = Play -end - -# playback pause toggle -begin - button = play/pause - prog = xine - repeat = 1 - config = Pause -end - -# stop playback -begin - button = stop - prog = xine - repeat = 1 - config = Stop -end - -# eject the current medium -begin - button = eject - prog = xine - repeat = 1 - config = Eject -end - -# scan playlist to grab stream infos -begin - button = mem - prog = xine - repeat = 1 - config = ScanPlaylistInfo -end - -# set position to -60 seconds in current stream -begin - button = rwnd - prog = xine - repeat = 1 - config = SeekRelative-60 -end - -# set position to +60 seconds in current stream -begin - button = ffwd - prog = xine - repeat = 1 - config = SeekRelative+60 -end - -# increment playback speed -begin - button = tune+ - prog = xine - repeat = 1 - config = SpeedFaster -end - -# decrement playback speed -begin - button = tune- - prog = xine - repeat = 1 - config = SpeedSlower -end - -# increment audio volume -begin - button = vol+ - prog = xine - repeat = 1 - config = Volume+ -end - -# decrement audio volume -begin - button = vol- - prog = xine - repeat = 1 - config = Volume- -end - -# audio muting toggle -begin - button = mute - prog = xine - repeat = 1 - config = Mute -end - -# select next audio channel -begin - button = ch+ - prog = xine - repeat = 1 - config = AudioChannelNext -end - -# select previous audio channel -begin - button = ch- - prog = xine - repeat = 1 - config = AudioChannelPrior -end - -# interlaced mode toggle -begin - button = scan - prog = xine - repeat = 1 - config = ToggleInterleave -end - -# cycle aspect ratio values -begin - button = display - prog = xine - repeat = 1 - config = ToggleAspectRatio -end - -# jump to Title Menu -begin - button = menu - prog = xine - repeat = 1 - config = TitleMenu -end - -# menu navigate up -begin - button = up - prog = xine - repeat = 1 - config = EventUp -end - -# menu navigate down -begin - button = down - prog = xine - repeat = 1 - config = EventDown -end - -# menu navigate left -begin - button = left - prog = xine - repeat = 1 - config = EventLeft -end - -# menu navigate right -begin - button = right - prog = xine - repeat = 1 - config = EventRight -end - -# menu select -begin - button = enter - prog = xine - repeat = 1 - config = EventSelect -end - -# jump to next chapter -begin - button = next - prog = xine - repeat = 1 - config = EventNext -end - -# jump to previous chapter -begin - button = prev - prog = xine - repeat = 1 - config = EventPrior -end - -# select a subtitle file -begin - button = repeat - prog = xine - repeat = 1 - config = SubSelector -end - -# enter the number 0 -begin - button = 0 - prog = xine - repeat = 1 - config = Number0 -end - -# enter the number 1 -begin - button = 1 - prog = xine - repeat = 1 - config = Number1 -end - -# enter the number 2 -begin - button = 2 - prog = xine - repeat = 1 - config = Number2 -end - -# enter the number 3 -begin - button = 3 - prog = xine - repeat = 1 - config = Number3 -end - -# enter the number 4 -begin - button = 4 - prog = xine - repeat = 1 - config = Number4 -end - -# enter the number 5 -begin - button = 5 - prog = xine - repeat = 1 - config = Number5 -end - -# enter the number 6 -begin - button = 6 - prog = xine - repeat = 1 - config = Number6 -end - -# enter the number 7 -begin - button = 7 - prog = xine - repeat = 1 - config = Number7 -end - -# enter the number 8 -begin - button = 8 - prog = xine - repeat = 1 - config = Number8 -end - -# enter the number 9 -begin - button = 9 - prog = xine - repeat = 1 - config = Number9 -end - -# quit the program -begin - button = exit - prog = xine - repeat = 1 - config = Quit -end - -## -# End of xine key bindings. -## - -## MPlayer lirc setup - -# Show OSD -begin - prog = mplayer - button = menu - repeat = 1 - config = osd -end - -# Pause playback -begin - prog = mplayer - button = play/pause - repeat = 1 - config = pause -end - -# Stop playback and exit -begin - prog = mplayer - button = stop - repeat = 1 - config = stop #quit -end - -# Mute -begin - prog = mplayer - button = mute - repeat = 1 - config = mute -end - -# Seek back 10 seconds -begin - prog = mplayer - button = rwnd - repeat = 1 - config = seek -10 -end - -# Seek forward 30 seconds -begin - prog = mplayer - button = ffwd - repeat = 1 - config = seek +10 -end - -# Quit -begin - prog = mplayer - button = exit - repeat = 1 - config = quit -end - -# Seek forward 10 minutes -begin - prog = mplayer - button = next - repeat = 1 - config = seek +600 -end - -# Seek backward 10 minutes -begin - prog = mplayer - button = prev - repeat = 1 - config = seek -600 -end - -# Toggle full-screen -begin - prog = mplayer - button = display - repeat = 1 - config = vo_fullscreen -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ea65/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/LinHES-config-SVN/templates/remotes/ericsson/lircd.conf.bte deleted file mode 100644 index d2330a3..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/ericsson/lircd.conf.bte +++ /dev/null @@ -1,53 +0,0 @@ -# -# -# contributed by Vadim Shliakhov <svadim@nm.ru> -# -# brand: Ericsson -# model: Mobile Phone over Bluetooth (BTE) -# -# supported devices: -# Ericsson t520m, t630 -# - -begin remote - - name bte - bits 16 - - begin codes - 0 0x0030 - 1 0x0031 - 2 0x0032 - 3 0x0033 - 4 0x0034 - 5 0x0035 - 6 0x0036 - 7 0x0037 - 8 0x0038 - 9 0x0039 - STAR 0x002a # '*' - HASH 0x0023 # '#' - UP 0x005e # '^' - DOWN 0x0076 # 'v' - LEFT 0x003c # '<' - RIGHT 0x003e # '>' - CANCEL 0x0063 # 'c' - VOL_UP 0x0075 # 'u' - VOL_DOWN 0x0064 # 'd' - -# t520m - NO 0x0065 # 'e' - YES 0x0073 # 's' - OPTION 0x004c # 'L' - MEMO 0x0047 # 'G' - hides dialog widget! - -# t630 - F_LEFT 0x005b # '[' - F_RIGHT 0x005d # ']' - triggers 'e' - J_CLICK 0x3a4a # ':J' - triggers 'e' - RETURN 0x3a52 # ':R' - triggers 'e' - CAMERA 0x3a43 # ':C' - WAP 0x3a4f # ':O' - - end codes -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/DENON.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/DENON.conf deleted file mode 100644 index e645cba..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/DENON.conf +++ /dev/null @@ -1,31 +0,0 @@ -# -# generic Denon config file -# -# source: various -# -# used by: Denon, Sharp - -begin remote - - name DENON - bits 15 - flags SPACE_ENC - eps 30 - aeps 100 - - one 275 1900 - zero 275 775 - ptrail 275 - gap 43000 - repeat_bit 0 - -# frequency 32000 -# frequency is 455/12 according to stewart@neuron.com -# remote is based on Sharp lc3715 IC - frequency 38000 -# duty_cycle unknown - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/MOTOROLA.conf deleted file mode 100644 index e786f2b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/MOTOROLA.conf +++ /dev/null @@ -1,53 +0,0 @@ -# -# generic Motorola config file -# -# source: Motorola Application Note AN463 -# ICs 68HC05K0/MC144105/MC144107 -# -# used by Grundig -# -# currently you have to create config files for such remotes manually -# as irrecord always will record the start code - -begin remote - - name MOTOROLA_START/STOP - flags SHIFT_ENC|CONST_LENGTH - bits 10 - eps 10 - aeps 250 - - header 512 2560 - one 512 512 - zero 512 512 - gap 32800 - repeat_bit 0 - frequency 32000 - duty_cycle 25 - - begin codes - START/STOP 0x0000000000000000 - end codes - -end remote - -begin remote - - name MOTOROLA - flags SHIFT_ENC|CONST_LENGTH - bits 10 - eps 10 - aeps 250 - - header 512 2560 - one 512 512 - zero 512 512 - gap 131000 - repeat_bit 0 - frequency 32000 - duty_cycle 25 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-pulse.conf deleted file mode 100644 index 51c31d9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-pulse.conf +++ /dev/null @@ -1,32 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Toshiba - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - repeat 9000 4500 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-short-pulse.conf deleted file mode 100644 index 068c253..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC-short-pulse.conf +++ /dev/null @@ -1,34 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo, -# Sanyo, Schneider, SEG, Yamaha - - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - repeat 9000 2250 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC.conf deleted file mode 100644 index 18ee327..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/NEC.conf +++ /dev/null @@ -1,30 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Canon, Creative, Domland, Orion - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-5.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-5.conf deleted file mode 100644 index f62e3f9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-5.conf +++ /dev/null @@ -1,30 +0,0 @@ -# -# generic RC-5 config file -# -# source: SAA3010 datasheet -# -# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider - -begin remote - - name RC-5 - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 7 - gap 113792 - toggle_bit 2 - -# frequency 35750 - frequency 36000 - duty_cycle 50 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-6.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-6.conf deleted file mode 100644 index 9565707..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RC-6.conf +++ /dev/null @@ -1,28 +0,0 @@ -# -# generic RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips - -begin remote - - name RC-6 - bits 8 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 13 - pre_data 0xEFB - gap 108000 - toggle_bit 5 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RCMM-32.conf deleted file mode 100644 index 89f847a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RCMM-32.conf +++ /dev/null @@ -1,23 +0,0 @@ -begin remote - - name RCMM-32 - bits 32 - flags RCMM|CONST_LENGTH - eps 2 - aeps 100 - - header 417 278 - three 167 778 - two 167 611 - one 167 444 - zero 167 278 - ptrail 167 - pre_data_bits 0 - gap 99817 - repeat_bit 0 - - begin codes - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RECS80.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RECS80.conf deleted file mode 100644 index b9702ea..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/RECS80.conf +++ /dev/null @@ -1,31 +0,0 @@ -# -# generic RECS 80 config file -# -# source: SAA3008 datasheet -# -# used by: Saba, Technisat - -begin remote - - name RECS80 - bits 5 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 150 - - one 141 7590 - zero 141 5090 - ptrail 141 - pre_data_bits 6 - pre_data 0x22 - gap 121440 - toggle_bit 2 - -# frequency 37916 - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SANYO.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SANYO.conf deleted file mode 100644 index fbcf8dc..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SANYO.conf +++ /dev/null @@ -1,34 +0,0 @@ -# -# generic Sanyo config file -# -# source: CIrCC datasheet, exiting config files -# Sanyo LC7461M datasheet -# -# used by: Aiwa, Chinon, Sanyo - -begin remote - - name Sanyo - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 26 -# just a guess - gap 108000 - - repeat 9000 4500 - -# 455kHz/12 - frequency 37916 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY12.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY12.conf deleted file mode 100644 index d62d12c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY12.conf +++ /dev/null @@ -1,28 +0,0 @@ -# -# generic Sony 12-bit config file -# -# source: various -# - -begin remote - - name SONY - bits 7 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 2400 600 - one 1200 600 - zero 600 600 - post_data_bits 5 - gap 45000 - min_repeat 2 - - frequency 40000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY20.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY20.conf deleted file mode 100644 index 4a64ca7..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/generic/SONY20.conf +++ /dev/null @@ -1,29 +0,0 @@ -# -# generic Sony 20-bit config file -# -# source: various -# - -begin remote - - name SONY - bits 7 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 2400 600 - one 1200 600 - zero 600 600 - post_data_bits 13 -# gap is just a guess - gap 45000 - min_repeat 2 - - frequency 40000 -# duty_cycle unknown - - begin codes - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircrc deleted file mode 100644 index 6f86bfe..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/lircrc +++ /dev/null @@ -1,472 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY' -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -# ??? -begin - prog = mythtv - button = MUTE - config = F9 -end - -begin - prog = mythtv - button = CH_UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = ] -end - -begin - prog = mythtv - button = CH_DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = [ -end - -begin - prog = mythtv - button = UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = LEFT -# navigates, or skips back during playback or live tv. - config = Left -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = Right -end - -begin - prog = mythtv - button = DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = MENU - config = m -end - -begin - prog = mythtv - button = EXIT - config = Esc -end - -begin - prog = mythtv - button = PLAY - config = l -end - -begin - prog = mythtv - button = PAUSE - config = p -end - -begin - prog = mythtv - button = STOP - config = Esc -end - -begin - prog = mythtv - # skip backward - button = |<< - config = PgUp -end - -begin - prog = mythtv - # skip forward - button = >>| - config = PgDown -end - -begin - prog = mythtv - button = RECORD - config = r -end - -begin - prog = mythtv - # rewind - button = << - config = < -end - -begin - prog = mythtv - # fast forward - button = >> - config = > -end - -begin - prog = mythtv - button = RED - # Delete - config = z -end - -begin - prog = mythtv - button = GREEN - # Info - config = i -end - -begin - prog = mythtv - button = YELLOW - # change aspect ratio - config = w -end - -begin - prog = mythtv - button = BLUE - config = Tab -end - -# MPLAYER -begin - prog = mplayer - button = POWER - config = quit -end - -begin - prog = mplayer - button = MUTE - config = mute -end - -begin - prog = mplayer - button = VOL_UP - repeat = 3 - config = volume +1 -end - -begin - prog = mplayer - button = VOL_DOWN - repeat = 3 - config = volume -1 -end - -begin - prog = mplayer - button = UP - repeat = 3 - config = seek +10 -end - -begin - prog = mplayer - button = LEFT -# navigates, or skips back during playback or live tv. - config = seek -30 -end - -begin - prog = mplayer - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = seek +60 -end - -begin - prog = mplayer - button = DOWN - repeat = 3 - config = seek -10 -end - -begin - prog = mplayer - button = EXIT - config = quit -end - -begin - prog = mplayer - button = play - config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin - prog = mplayer - button = STOP - config = quit -end - -begin - prog = mplayer - # skip backward - button = |<< - config = seek -600 -end - -begin - prog = mplayer - # skip forward - button = >>| - config = seek +600 -end - -begin - prog = mplayer - # slow forward - button = << - config = speed_mult 0.5 -end - -begin - prog = mplayer - # fast forward - button = >> - config = speed_mult 2.0 -end - -### Xine lirc setup By AnDy! - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = UP -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = DOWN -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Menu -end - -begin -prog = xine -button = >> -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = << -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = >>| -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = |<< -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GREEN -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/gr8zap/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircd.conf deleted file mode 100644 index c0849ef..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircd.conf +++ /dev/null @@ -1,199 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 -# -# contributed by Jens Leuschner <leuschner@gmx.net> -# -# brand: Hauppauge -# model: -# supported devices: WinTV primo; WinTV pci; WinTV radio -# -# This config file will work with both homebrew receivers and -# original Hauppauge TV cards !!! -# - -begin remote - - name Hauppauge - bits 13 - flags SHIFT_ENC - eps 30 - aeps 100 - - one 950 830 - zero 950 830 - plead 960 - gap 89584 - repeat_bit 2 - - begin codes - TV 0x000000000000100F - RADIO 0x000000000000100C - FULL_SCREEN 0x000000000000102E - CH+ 0x0000000000001020 - CH- 0x0000000000001021 - VOL- 0x0000000000001011 - VOL+ 0x0000000000001010 - MUTE 0x000000000000100D - SOURCE 0x0000000000001022 - 1 0x0000000000001001 - 2 0x0000000000001002 - 3 0x0000000000001003 - 4 0x0000000000001004 - 5 0x0000000000001005 - 6 0x0000000000001006 - 7 0x0000000000001007 - 8 0x0000000000001008 - 9 0x0000000000001009 - 0 0x0000000000001000 - RESERVED 0x000000000000101E - MINIMIZE 0x0000000000001026 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 -# -# contributed by -# -# brand: Hauppauge -# model no. of remote control: -# devices being controlled by this remote: PVR 2/350 -# - -begin remote - - name hauppauge_pvr - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircrc deleted file mode 100644 index 2f1e514..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/lircrc +++ /dev/null @@ -1,505 +0,0 @@ -# lircrc.example.HauppaugeGrey-nativelirc -# 2003-09-17, Robert Kulagowski -# mailto:rkulagow@rocketmail.com -# Save this file in ~/.mythtv/lircrc - -begin - prog = mythtv - button = Power - config = Esc -end - -begin - prog = mythtv - button = Go -# Swap the PiP windows - config = N -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = Back/Exit - config = Esc -end - -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = Menu - config = M -end - -# Below are keys used with the Hauppauge Grey remote - -begin - prog = mythtv -# This is the Red key -# We'll use it for "Delete" - button = Red - config = D -end - -begin - prog = mythtv -# This is the Green key -# We'll use it for "Information" - button = Green - config = I -end - -# Note the "repeat = " strings in the volume and channel. -# This means that if you hold down the key, every nth instance will be -# passed. This depends on your system, so you may want to increase or -# decrease this and see what happens. repeat = 1 is probably too -# fast. - -begin - prog = mythtv -# This is the Yellow key -# Use it as a volume key - button = Yellow - repeat = 3 - config = F10 -end - -begin - prog = mythtv -# This is the Blue key -# Use it as a volume key - button = Blue - repeat = 3 - config = F11 -end - -begin - prog = mythtv - button = Ch+ -# This is the "up" on the central diamond - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = Ch- -# This is the "down" on the central diamond - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = Vol- -# This is the "left" on the central diamond - repeat = 3 - config = Left -end - -begin - prog = mythtv - button = Vol+ -# This is the "right" on the central diamond - repeat = 3 - config = Right -end - -begin - prog = mythtv -# Middle button on the diamond - button = Ok - config = Return -end - -begin - prog = mythtv - button = Mute - config = F9 -end - -begin - prog = mythtv -# Change focus for PiP (to change channel in the other window) - button = Blank - config = B -end - -begin - prog = mythtv -# Toggle PiP on/off - button = Full - config = V -end - -begin - prog = mythtv - button = Rewind - config = Left -end - -begin - prog = mythtv - button = Play - config = P -end - -begin - prog = mythtv - button = Forward - config = Right -end - -begin - prog = mythtv - button = Record - config = R -end - -begin - prog = mythtv -# Teletext - button = Stop - config = T -end - -begin - prog = mythtv - button = Pause - config = P -end - -begin - prog = mythtv - button = Replay -# Use for backwards commercial skip - config = Q -end - -begin - prog = mythtv - button = Skip -# Use for forward commercial skip - config = Z -end - -#MPlayer -begin - prog = mplayer - button = Power - config = quit -end - -begin - prog = mplayer - button = Menu - config = osd -end - -begin - prog = mplayer - button = Rewind - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = Forward - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = Replay - config = seek -60 - repeat = 1 -end - -begin - prog = mplayer - button = Skip - config = seek +60 - repeat = 1 -end - -begin - prog = mplayer - button = Pause - config = pause -end - -begin - prog = mplayer - button = Play - config = pause -end - -begin - prog = mplayer - button = Back/Exit - config = quit -end - -begin - prog = mplayer - button = Vol+ - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = Vol- - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = Mute - config = mute -end -##XINE - - begin - prog = xine - button = Play - repeat = 3 - config = Play - end - - begin - prog = xine - button = Stop - repeat = 3 - config = Stop - end - - begin - prog = xine - button = Back/Exit - config = Quit - end - - begin - prog = xine - button = Pause - repeat = 3 - config = Pause - end - - begin - prog = xine - button = Ch+ - repeat = 4 - config = EventUp - end - - begin - prog = xine - button = Ch- - repeat = 4 - config = EventDown - end - - begin - prog = xine - button = Vol- - repeat = 4 - config = EventLeft - end - - begin - prog = xine - button = Vol+ - repeat = 4 - config = EventRight - end - - begin - prog = xine - button = Ok - repeat = 0 - config = EventSelect - end - - begin - prog = xine - button = Menu - repeat = 0 - config = Menu - end - - #vol down - begin - prog = xine - button = Yellow - repeat = 1 - config = Volume- - end - - #vol up - begin - prog = xine - button = Red - repeat = 1 - config = Volume+ - end - - begin - prog = xine - button = Forward - repeat = 2 - config = SeekRelative+30 - end - - begin - prog = xine - button = Rewind - repeat = 2 - config = SeekRelative-30 - end - - #ch up - begin - prog = xine - button = Green - repeat = 1 - config = SeekRelative+60 - end - - #ch down - begin - prog = xine - button = Blue - repeat = 1 - config = SeekRelative-60 - end - - #sleep - begin - prog = xine - button = Go - repeat = 1 - config = ZoomIn - end - - #display - begin - prog = xine - button = Skip - repeat = 1 - config = ZoomOut - end - - #skip chapter forward - begin - prog = xine - button = Skip - repeat = 1 - config = EventNext - end - - #skip chapter backward - begin - prog = xine - button = Replay - repeat = 1 - config = EventPrior - end - - begin - prog = lircnav - button = Vol- - config = page_down - end - - begin - prog = lircnav - button = Vol+ - config = page_up - end - - begin - prog = lircnav - button = Ch+ - config = up - end - - begin - prog = lircnav - button = Ch- - config = down - end - - begin - prog = lircnav - button = Ok - config = select - end - - begin - prog = lircnav - button = Power - config = quit - end - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/preview.jpg Binary files differdeleted file mode 100644 index a40a1e8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge-grey/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircd.conf.hauppauge deleted file mode 100644 index 4987807..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircd.conf.hauppauge +++ /dev/null @@ -1,274 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 -# -# contributed by Jens Leuschner <leuschner@gmx.net> -# -# brand: Hauppauge -# model: -# supported devices: WinTV primo; WinTV pci; WinTV radio -# -# This config file will work with both homebrew receivers and -# original Hauppauge TV cards !!! -# - -begin remote - - name Hauppauge - bits 13 - flags SHIFT_ENC - eps 30 - aeps 100 - - one 950 830 - zero 950 830 - plead 960 - gap 89584 - repeat_bit 2 - - begin codes - TV 0x000000000000100F - RADIO 0x000000000000100C - FULL_SCREEN 0x000000000000102E - CH+ 0x0000000000001020 - CH- 0x0000000000001021 - VOL- 0x0000000000001011 - VOL+ 0x0000000000001010 - MUTE 0x000000000000100D - SOURCE 0x0000000000001022 - 1 0x0000000000001001 - 2 0x0000000000001002 - 3 0x0000000000001003 - 4 0x0000000000001004 - 5 0x0000000000001005 - 6 0x0000000000001006 - 7 0x0000000000001007 - 8 0x0000000000001008 - 9 0x0000000000001009 - 0 0x0000000000001000 - RESERVED 0x000000000000101E - MINIMIZE 0x0000000000001026 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 -# -# contributed by -# -# brand: Hauppauge -# model no. of remote control: -# devices being controlled by this remote: PVR 2/350 -# - -begin remote - - name hauppauge_pvr - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 -# -# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at -# members of linux user group Vorarlberg www.lugv.at -# -# for ir remote controler from Hauppauge WinTV Nexus-S -# most of the keys are supported -# -# brand: Hauppauge -# model no. of remote control: WinTV Nexus-S -# devices being controlled by this remote: -# - -begin remote - - name Hauppauge_WinTV_Nexus-S - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 944 828 - zero 944 828 - plead 980 - gap 113932 - min_repeat 1 - toggle_bit 2 - - - begin codes - Up 0x0000000000001794 - Down 0x0000000000001795 - Left 0x0000000000001796 - Right 0x0000000000001797 - Power 0x00000000000017BD - Ok 0x00000000000017A5 - Menu 0x000000000000178D - Back 0x000000000000179F - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - 0 0x0000000000001780 - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Play 0x00000000000017B5 - Pause 0x00000000000017B0 - Stop 0x00000000000017B6 - Record 0x00000000000017B7 - FastFwd 0x00000000000017B4 - FastRwd 0x00000000000017B2 - Channel+ 0x00000000000017A0 - Channel- 0x00000000000017A1 - Volume+ 0x0000000000001790 - Volume- 0x0000000000001791 - Mute 0x000000000000178F - Timers 0x000000000000178A - Recordings 0x000000000000178E - Back 0x000000000000179F - Record 0x00000000000017B7 - Pause 0x00000000000017B0 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircmd.conf.hauppauge deleted file mode 100644 index d0f36e8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/lircmd.conf.hauppauge +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * RADIO -BUTTON2_TOGGLE * VOL+ -BUTTON3_TOGGLE * SOURCE - -BUTTON1_CLICK * TV -BUTTON1_CLICK * VOL- -BUTTON3_CLICK * MUTE - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/preview.jpg Binary files differdeleted file mode 100644 index a40a1e8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hauppauge/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/LinHES-config-SVN/templates/remotes/hercules/lircd.conf.smarttv_stereo deleted file mode 100644 index 4b3d95a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/hercules/lircd.conf.smarttv_stereo +++ /dev/null @@ -1,63 +0,0 @@ -#
-# this config file was automatically generated
-# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003
-#
-# contributed by Dimitris Michail <dmichail|yahoo.com>
-#
-# brand: Hercules
-# model no. of remote control: unknown
-# devices being controlled by this remote: Hercules SmartTV Stereo
-#
-# Works with module lirc_i2c, reports PV951 IR
-
-begin remote
-
- name HERCULES_SMARTTV_STEREO
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 16
- pre_data 0x61D6
- gap 199964
- toggle_bit 0
-
-
- begin codes
- POWER 0x00000000000048B7
- MUTE 0x000000000000C837
- PREVIEW 0x000000000000F00F
- FULLSCREEN 0x00000000000038C7
- AV/TV 0x0000000000008877
- TELETEXT 0x00000000000008F7
- 1 0x000000000000807F
- 2 0x00000000000040BF
- 3 0x000000000000C03F
- 4 0x00000000000020DF
- 5 0x000000000000A05F
- 6 0x000000000000609F
- 7 0x000000000000E01F
- 8 0x00000000000010EF
- 9 0x000000000000906F
- 0 0x00000000000000FF
- SNAPSHOT 0x00000000000050AF
- 100+ 0x000000000000E817
- CH+ 0x00000000000058A7
- CH- 0x0000000000007887
- VOL+ 0x000000000000D827
- VOL- 0x000000000000F807
- PAUSE 0x000000000000B04F
- RECORD 0x000000000000708F
- STOP 0x000000000000B847
- PLAY 0x0000000000009867
- TV_REPLAY 0x0000000000006897
- TIME_SHIFT 0x00000000000028D7
- SEEK_BACK 0x00000000000018E7
- SEEK_FWD 0x00000000000030CF
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/i2c.id b/abs/core-testing/LinHES-config-SVN/templates/remotes/i2c.id deleted file mode 100644 index 50e89e9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/i2c.id +++ /dev/null @@ -1,5 +0,0 @@ -0070:4000|Hauppauge|WinTV PVR 250|hauppauge-grey -0070:4009|Hauppauge|WinTV PVR 250|hauppauge-grey -0070:4801|Hauppauge|WinTV PVR 250|hauppauge-grey -0070:4803|Hauppauge|WinTV PVR 250|hauppauge-grey -0070:0003|Hauppauge|WinTV PVR 250|hauppauge-grey
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircd.conf deleted file mode 100644 index 97bbf4c..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircd.conf +++ /dev/null @@ -1,88 +0,0 @@ -# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006 -#
-# contributed by M.Brakemeier -#
-# brand: SoundGraph -# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name iMON-PAD
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 235965
- min_repeat 1
- toggle_bit 0
-
- begin codes
- AppExit 0x288195B7
- Power 0x289115B7 - Record 0x298115B7
- Play 0x2A8115B7
- Open 0x29B1d5B7 - Rewind 0x2A8195B7
- Pause 0x2A9115B7
- FastForward 0x2B8115B7
- PrevChapter 0x2B9115B7
- Stop 0x2B9715B7
- NextChapter 0x298195B7
- Esc 0x2BB715B7
- Eject 0x299395B7
- AppLauncher 0x29B715B7
- MultiMon 0x2AB195B7
- TaskSwitcher 0x2A9395B7
- Mute 0x2B9595B7
- Vol+ 0x28A395B7
- Vol- 0x28A595B7
- Ch+ 0x289395B7
- Ch- 0x288795B7
- Timer 0x2B8395B7
- 1 0x28B595B7
- 2 0x2BB195B7
- 3 0x28B195B7
- 4 0x2A8595B7
- 5 0x299595B7
- 6 0x2AA595B7
- 7 0x2B9395B7
- 8 0x2A8515B7
- 9 0x2AA115B7
- 0 0x2BA595B7
- ShiftTab 0x28B515B7
- Tab 0x29A115B7
- Red 0x2B8515B7 # MyMovie - Green 0x299195B7 # MyMusic - Blue 0x2BA115B7 # MyPhoto - Yellow 0x28A515B7 # MyTV - Bookmark 0x288515B7
- Thumbnail 0x2AB715B7
- AspectRatio 0x29A595B7
- FullScreen 0x2AA395B7
- Purple 0x29A295B7 # MyDVD - Menu 0x2BA385B7
- Caption 0x298595B7
- Language 0x2B8595B7
- MouseKeyboard 0x299115B7
- SelectSpace 0x2A9315B7
- MouseMenu 0x28B715B7
- MouseRightClick 0x688481B7
- Enter 0x28A195B7
- MouseLeftClick 0x688301B7
- WindowsKey 0x2B8195B7
- Backspace 0x28A115B7
- Mouse_N 0x690281B7 - Mouse_S 0x688291B7 - Mouse_W 0x6A8281B7 - Mouse_E 0x688A81B7 - end codes
-
-end remote
diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircrc deleted file mode 100644 index 3ad34d8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/lircrc +++ /dev/null @@ -1,240 +0,0 @@ -################################### -# lircrc config as used by Stev391 June 2007 -# Not all of the buttons are configured yet, only the commonly used buttons -################################### - -# Escape -begin - prog = mythtv - button = AppExit - config = Esc - repeat = 3 -end - -# Escape Key 2 -begin - prog = mythtv - button = Esc - config = Esc -end - -# Channel Up -begin - prog = mythtv - button = Ch+ - config = Up - repeat = 3 -end - -# Channel Down -begin - prog = mythtv - button = Ch- - config = Down - repeat = 3 -end - -# Volume Up -begin - prog = mythtv - button = Vol+ - repeat = 3 - config = Right -end - -# Volume Down -begin - prog = mythtv - button = Vol- - repeat = 3 - config = Left -end - -# Enter/Return -begin - prog = mythtv - button = Enter - config = Return -end - -# Menu Button -begin - prog = mythtv - button = Menu - config = M -end - -# Mute -begin - prog = mythtv - button = Mute - config = F9 -end - -# Rewind -begin - prog = mythtv - button = Rewind - config = PgUp -end - -# Fast Forward -begin - prog = mythtv - button = FastForward - config = PgDown -end - -# Play -begin - prog = mythtv - button = Play - config = P -end - -# Pause -begin - prog = mythtv - button = Pause - config = P -end - -# Record -begin - prog = mythtv - button = Record - config = R -end - -# Stop -begin - prog = mythtv - button = Stop - config = O -end - -# Previous Track/Chapter -begin - prog = mythtv - button = PrevChapter - config = Home -end - -# Next Track/Chapter -begin - prog = mythtv - button = NextChapter - config = End -end - -# Jump Point to MythVideo -begin - prog = mythtv - button = MyMovie - config = F12 -end - -# Jump Point to MythMusic -begin - prog = mythtv - button = MyMusic - config = F11 -end - -# Jump Point to LiveTV -begin - prog = mythtv - button = MyTV - config = F10 -end - -# Jump Point to Main Menu -begin - prog = mythtv - button = Multimon - config = F2 -end - -# Jump Point to Myth Gallery -begin - prog = mythtv - button = MyPhoto - config = F3 -end - -# Jump Point to Play DVD -begin - prog = mythtv - button = MyDVD - config = F4 -end - -# Display Information -begin - prog = mythtv - button = Caption - config = I -end - -############################## -# Numbers -############################## -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon-pad/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon deleted file mode 100644 index 6875f3f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon +++ /dev/null @@ -1,79 +0,0 @@ -# -# contributed by Venky Raju (dev@venky.ws) -# -# brand: Soundgraph -# model no. of remote control: iMON MultiMedian -# -# devices being controlled by this remote: HTPC -# - -begin remote - - name IMON_MultiMedian - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 130 - - header 9000 4500 - one 625 1625 - zero 625 375 - ptrail 625 - repeat 8875 2125 - pre_data_bits 16 - pre_data 0x609F - gap 100000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - App.Exit 0x00000000000000FF - Power 0x000000000000807F - 1 0x00000000000040BF - 2 0x000000000000C03F - 3 0x00000000000020DF - 4 0x000000000000A05F - 5 0x000000000000609F - 6 0x000000000000E01F - 7 0x00000000000010EF - 8 0x000000000000906F - 9 0x00000000000050AF - 0 0x000000000000D02F - Windows 0x00000000000030CF - Menu 0x000000000000B04F - App.Launcher 0x000000000000708F - Function 0x000000000000F00F - Task.Switcher 0x00000000000008F7 - Back 0x0000000000008877 - Select 0x00000000000048B7 - Eject 0x0000000000009867 - Delete 0x00000000000018E7 - Up 0x000000000000C837 - Right 0x0000000000006897 - Down 0x000000000000E817 - Left 0x00000000000028D7 - Enter 0x000000000000A857 - Vol- 0x00000000000058A7 - Vol+ 0x000000000000D827 - Mute 0x00000000000038C7 - Play 0x000000000000B847 - Pause 0x0000000000007887 - Prev 0x000000000000F807 - Next 0x00000000000002FD - Rew 0x000000000000827D - Fwd 0x00000000000042BD - Stop 0x000000000000C23D - Open 0x00000000000022DD - Rec 0x000000000000A25D - Bookmark 0x000000000000629D - Thumbnail 0x000000000000E21D - Aspect 0x00000000000012ED - DVD.Menu 0x000000000000926D - DVD.Caption 0x00000000000052AD - DVD.Language 0x000000000000D22D - Full.Screen 0x00000000000032CD - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-pad deleted file mode 100644 index e8b8818..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-pad +++ /dev/null @@ -1,84 +0,0 @@ -# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005
-#
-# contributed by Venky Raju
-#
-# brand: iMON-New
-# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name iMON-PAD
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 235965
- min_repeat 1
- toggle_bit 0
-
-
- begin codes
- AppExit 0x288195B7
- Record 0x298115B7
- Play 0x2A8115B7
- SlowMotion 0x29B195B7
- Rewind 0x2A8195B7
- Pause 0x2A9115B7
- FastForward 0x2B8115B7
- PrevChapter 0x2B9115B7
- Stop 0x2B9715B7
- NextChapter 0x298195B7
- Esc 0x2BB715B7
- Eject 0x299395B7
- AppLauncher 0x29B715B7
- MultiMon 0x2AB195B7
- TaskSwitcher 0x2A9395B7
- Mute 0x2B9595B7
- Vol+ 0x28A395B7
- Vol- 0x28A595B7
- Ch+ 0x289395B7
- Ch- 0x288795B7
- Timer 0x2B8395B7
- 1 0x28B595B7
- 2 0x2BB195B7
- 3 0x28B195B7
- 4 0x2A8595B7
- 5 0x299595B7
- 6 0x2AA595B7
- 7 0x2B9395B7
- 8 0x2A8515B7
- 9 0x2AA115B7
- 0 0x2BA595B7
- ShiftTab 0x28B515B7
- Tab 0x29A115B7
- MyMovie 0x2B8515B7
- MyMusic 0x299195B7
- MyPhoto 0x2BA115B7
- MyTV 0x28A515B7
- Bookmark 0x288515B7
- Thumbnail 0x2AB715B7
- AspectRatio 0x29A595B7
- FullScreen 0x2AA395B7
- MyDVD 0x29A295B7
- Menu 0x2BA385B7
- Caption 0x298595B7
- Language 0x2B8595B7
- MouseKeyboard 0x299115B7
- SelectSpace 0x2A9315B7
- MouseMenu 0x28B715B7
- MouseRightClick 0x688481B7
- Enter 0x28A195B7
- MouseLeftClick 0x688301B7
- WindowsKey 0x2B8195B7
- Backspace 0x28A115B7
- end codes
-
-end remote
diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-rsc deleted file mode 100644 index cf6d2fc..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/imon/lircd.conf.imon-rsc +++ /dev/null @@ -1,109 +0,0 @@ -# -# contributed by Venky Raju (dev@venky.ws) -# -# brand: Soundgraph -# model no. of remote control: iMON RSC -# -# devices being controlled by this remote: HTPC -# -# Credit: Changwoo Ryu <cwryu@debian.org> -# -begin remote - - name IMON_RSC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 130 - - header 9000 4500 - one 625 1625 - zero 625 375 - ptrail 625 - repeat 8875 2125 - pre_data_bits 16 - pre_data 0x0108 - - gap 100000 - - begin codes - App.Exit 0x00000000000008F7 - Power 0x000000000000F40B - ScreenSaver 0x00000000000052AD - Timer 0x000000000000926D - 1 0x0000000000002AD5 - 2 0x000000000000AA55 - 3 0x0000000000006A95 - 4 0x000000000000EA15 - 5 0x0000000000001AE5 - 6 0x0000000000009A65 - 7 0x0000000000005AA5 - 8 0x000000000000DA25 - 9 0x0000000000003AC5 - 0 0x000000000000BA45 - Desktop 0x000000000000817E - Max/Res 0x00000000000041BE - Esc 0x00000000000012ED - Windows 0x000000000000D22D - Menu 0x000000000000C13E - App.Launcher 0x000000000000A25D - Function 0x00000000000021DE - Task.Switcher 0x000000000000629D - Backspace 0x000000000000A15E - Mouse/Keyboard 0x000000000000619E - Space 0x000000000000E11E - Shift.Tab 0x0000000000007887 - Enter 0x00000000000019E6 - Tab 0x000000000000F807 - L.Click 0x000000000000d827 - DragNDrop 0x0000000000006897 - R.Click 0x000000000000b847 - Mute 0x00000000000011ee - Vol- 0x0000000000007a85 - Vol+ 0x000000000000fa05 - Play 0x00000000000032cd - Pause 0x000000000000b24d - Open 0x000000000000f20d - Prev 0x0000000000000af5 - Next 0x0000000000008a75 - Stop 0x000000000000728d - Rew 0x0000000000004ab5 - F.Fwd 0x000000000000ca35 - Full.Screen 0x000000000000916e - end codes - -end remote - -begin remote - - name IMON_RSC_STICK - bits 4 - flags SPACE_ENC - eps 40 - aeps 130 - - header 2125 1875 - one 625 1625 - zero 625 375 - ptrail 625 - - begin codes - STICK_N 0x0 - STICK_S 0x1 - STICK_E 0x2 - STICK_W 0x3 - STICK_NE 0x4 - STICK_SW 0x5 - STICK_SE 0x6 - STICK_NW 0x7 - STICK_NNE 0x8 - STICK_SSW 0x9 - STICK_SEE 0xa - STICK_NWW 0xb - STICK_NEE 0xc - STICK_SWW 0xd - STICK_SSE 0xe - STICK_NNW 0xf - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/LinHES-config-SVN/templates/remotes/iodata/lircd.conf.gvbctv5pci deleted file mode 100644 index 076d032..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/iodata/lircd.conf.gvbctv5pci +++ /dev/null @@ -1,68 +0,0 @@ -# -# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI -# -# this config file was automatically generated -# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003 -# -# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org) -# -# brand: I-O Data Co. -# model: GV-BCTV5/PCI -# supported devices: This remote control comes with the TV Tuner card -# GV-BCTV5/PCI from I-O Data Co. (Japan) -# - -begin remote - - name GV-BCTV5/PCI - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 149949 - toggle_bit 0 - - - begin codes - TV 0x0000000000000042 - FM 0x0000000000000022 - EPG 0x0000000000000062 - POWER 0x0000000000000002 - 1 0x0000000000000052 - 2 0x0000000000000032 - 3 0x0000000000000072 - 4 0x000000000000004A - 5 0x000000000000002A - 6 0x000000000000006A - 7 0x000000000000005A - 8 0x000000000000003A - 9 0x000000000000007A - 10 0x0000000000000046 - 11 0x0000000000000026 - 12 0x0000000000000066 - LIVE 0x0000000000000012 - TIME_SHIFT 0x000000000000000A - PLAY 0x000000000000001A - MULTI 0x0000000000000006 - VIDEO 0x0000000000000056 - SVIDEO 0x000000000000004E - CHANNEL_PLUS 0x0000000000000036 - CHANNEL_MINUS 0x000000000000002E - VOLUME_PLUS 0x0000000000000076 - VOLUME_MINUS 0x000000000000006E - MUTE 0x0000000000000016 - PICTURE_SIZE 0x000000000000000E - PAUSE 0x000000000000005E - HALT 0x000000000000003E - RECORD 0x000000000000007E - STOP 0x000000000000001E - REWIND 0x0000000000000043 - START 0x0000000000000023 - FORWARD 0x0000000000000063 - SYNC 0x0000000000000003 - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/km_ready_preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/km_ready_preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/km_ready_preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/LinHES-config-SVN/templates/remotes/knc_one/lircd.conf.knc_one deleted file mode 100644 index b962433..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/knc_one/lircd.conf.knc_one +++ /dev/null @@ -1,62 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001 -# -# contributed by Ulrich Mueller <ulrich.mueller42@web.de> -# -# brand: KNC ONE -# model: TV Station (-/SE/PRO/RDS) -# -# brand: Anubis -# model: Typhoon TView Tuner (-/Stereo/RDS) -# - -begin remote - - name lircd.conf - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 199992 - toggle_bit 0 - - - begin codes - TV/FM 0x000000000000001C - OK 0x0000000000000015 - F1 0x000000000000000B - POWER 0x0000000000000012 - AV/TV 0x0000000000000011 - TELETEXT 0x000000000000000F - FULLSCREEN 0x0000000000000013 - MUTE 0x0000000000000010 - 1 0x0000000000000001 - 2 0x0000000000000002 - 3 0x0000000000000003 - 4 0x0000000000000004 - 5 0x0000000000000005 - 6 0x0000000000000006 - 7 0x0000000000000007 - 8 0x0000000000000008 - 9 0x0000000000000009 - 0 0x0000000000000000 - CH+ 0x000000000000001A - CH- 0x000000000000001E - VOL+ 0x000000000000001B - VOL- 0x000000000000001F - SNAPSHOT 0x000000000000000A - 100+ 0x0000000000000017 - RECORD 0x000000000000000D - PAUSE 0x000000000000000E - PLAY 0x000000000000001D - STOP 0x0000000000000019 - MENU 0x0000000000000016 - ESC 0x0000000000000014 - - 0x0000000000000018 - + 0x000000000000000C - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/LinHES-config-SVN/templates/remotes/kworld/lircd.conf.kworld deleted file mode 100644 index 280c47d..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/kworld/lircd.conf.kworld +++ /dev/null @@ -1,144 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni <pnis at coder.hu> -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name kworld-878 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - power 0x0000000000007887 - source 0x000000000000E01F - scan 0x00000000000038C7 - mute 0x00000000000018E7 - tv/fm 0x000000000000C03F - 1 0x000000000000807F - 2 0x000000000000D02F - 3 0x000000000000D827 - fm_scan+ 0x000000000000F807 - 4 0x000000000000A05F - 5 0x000000000000906F - 6 0x000000000000A857 - fm_scan- 0x000000000000E817 - 7 0x000000000000609F - 8 0x00000000000050AF - 9 0x00000000000048B7 - fm_freq+ 0x00000000000030CF - 0 0x00000000000040BF - + 0x00000000000008F7 - recall 0x000000000000C837 - fm-freq- 0x00000000000020DF - record 0x00000000000000FF - stop 0x00000000000010EF - play 0x0000000000008877 - minimze 0x000000000000F00F - ch+ 0x000000000000F807 - zoom 0x0000000000009867 - vol- 0x00000000000028D7 - ch- 0x000000000000E817 - vol+ 0x0000000000006897 - snapshot 0x00000000000058A7 - mts 0x000000000000B04F - function- 0x00000000000020DF - function 0x000000000000708F - function+ 0x00000000000030CF - reset 0x000000000000B847 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni <pnis at coder.hu> -# Modified by Daniel Foote <freefoote at dview dot net> to -# work with remote that came with DVB-T card. -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name KWorld_DVB-T - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - ch- 0x0000000000007887 - 7 0x000000000000E01F - preview 0x00000000000038C7 - zoom 0x00000000000018E7 - 3 0x000000000000C03F - 1 0x000000000000807F - epg 0x000000000000D02F - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - 5 0x000000000000A05F - 9 0x000000000000906F - reset 0x000000000000A857 - turnleft 0x000000000000E817 - 6 0x000000000000609F - 0 0x00000000000050AF - power 0x00000000000048B7 - scan 0x00000000000030CF - 2 0x00000000000040BF - mute 0x00000000000008F7 - snap 0x000000000000C837 - 4 0x00000000000020DF - turnup 0x00000000000000FF - 8 0x00000000000010EF - backward 0x0000000000008877 - source 0x000000000000F00F - forward 0x0000000000009867 - pip 0x00000000000028D7 - ch- 0x000000000000E817 - play 0x0000000000006897 - ch+ 0x00000000000058A7 - stop 0x000000000000B04F - function- 0x00000000000020DF - pause 0x000000000000708F - function+ 0x00000000000030CF - rec 0x000000000000B847 - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.PVR2000 deleted file mode 100644 index 3adfd4b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.PVR2000 +++ /dev/null @@ -1,75 +0,0 @@ -# -# this config file was written on Mon Dec 13 23:51:16 MET 2004 -# by Thomas Reitmayr (treitmayr@yahoo.com) -# -# brand: Leadtek -# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a -# limitation of the remote control. -# - - -begin remote - - name PVR2000 - bits 8 - flags SHIFT_ENC - gap 120000 - - begin codes - POWER 0x0000000000000070 - TV 0x0000000000000026 - FM 0x0000000000000027 - DVD 0x0000000000000028 - RED 0x000000000000003B - GREEN 0x000000000000003C - YELLOW 0x000000000000003D - BLUE 0x000000000000003E - TELETEXT 0x000000000000006F - SLEEP 0x0000000000000030 - MUTE 0x0000000000000064 - BOSS_KEY 0x0000000000000039 - CH_UP 0x000000000000007C - CH_DOWN 0x0000000000000060 - VOL_DOWN 0x0000000000000078 - VOL_UP 0x0000000000000074 - ENTER 0x0000000000000063 - CC 0x0000000000000020 - FULLSCREEN 0x0000000000000073 - MENU 0x000000000000003F - SCAN 0x0000000000000021 - REPLAY 0x0000000000000032 - PLAY 0x0000000000000033 - SKIP 0x0000000000000034 - OSD 0x0000000000000022 - BACK 0x0000000000000024 - STOP 0x0000000000000036 - FORWARD 0x0000000000000025 - LANGUAGE 0x0000000000000023 - 1 0x0000000000000075 - 2 0x0000000000000076 - 3 0x0000000000000077 - 4 0x0000000000000079 - 5 0x000000000000007A - 6 0x000000000000007B - 7 0x000000000000007D - 8 0x000000000000007E - 9 0x000000000000007F - 0 0x0000000000000062 - . 0x0000000000000031 - RECALL 0x0000000000000061 - VIDEO 0x000000000000006E - AUDIO 0x000000000000006B - DISPLAY 0x0000000000000066 - SNAPSHOT 0x0000000000000038 - PIP 0x000000000000003A - RECSTOP 0x0000000000000036 - REC 0x0000000000000037 - TIMESHIFT 0x0000000000000035 - - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0007 deleted file mode 100644 index 47e5b8e..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0007 +++ /dev/null @@ -1,86 +0,0 @@ -# Made by Leandro Lucarella <luca@lugmen.org.ar> -# -# brand: Leadtek -# model: RM-0007 (bundeled with WinView 601TV card) -# -# Based on Winfast TV200: -# modified by CB -# -# contributed by Erik Christiansson, aka Sci -# www.alphafish.com -# erik@alphafish.com -# -# modifications based on the config files from -# Juan Toledo <toledo@users.sourceforge.net> and -# Markus Lischka <mlischka@users.sourceforge.net> -# -# With some modification based on a patch for WinView 601 made by -# Juan FC. <juan@kili.com.ar> -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to -# be a hardware limitation. -# - -begin remote - - name RM-0007 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 100 - - header 9000 4500 - one 629 1617 - zero 629 495 - ptrail 632 - repeat 9000 2250 - pre_data_bits 16 - pre_data 0xC03F - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes -# 1st row of buttons - POWER 0x00000000000000FF - MENU 0x000000000000807F - FM 0x00000000000040BF - PC/TV 0x000000000000C03F -# volume/channel - VOL_UP 0x00000000000020DF - VOL_DOWN 0x00000000000010EF - CH_UP 0x00000000000030CF - CH_DOWN 0x00000000000008F7 -# numbers pad - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - RETURN 0x0000000000008877 - 0 0x00000000000048B7 - DISPLAY 0x000000000000C837 -# unknown icon buttons - HELP 0x00000000000038C7 - SCAN 0x000000000000A857 - OSD 0x0000000000006897 - OPTIONS 0x000000000000E817 -# labeled buttons - MUTE 0x00000000000028D7 - MTS 0x000000000000D827 - VIDEO 0x0000000000007887 - CC 0x000000000000F807 -# color dots buttons - RED 0x00000000000018E7 - GREEN 0x0000000000009867 - YELLOW 0x00000000000058A7 - BLUE 0x000000000000B847 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0010 deleted file mode 100644 index e0efcba..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircd.conf.RM-0010 +++ /dev/null @@ -1,101 +0,0 @@ -# -# this config file was automatically generated -# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002 -# -# modified by CB -# -# contributed by Erik Christiansson, aka Sci -# www.alphafish.com -# erik@alphafish.com -# -# brand: Leadtek -# model: RM-0010 (bundeled with TV2000 TV-card) -# -# modifications based on the config files from -# Juan Toledo <toledo@users.sourceforge.net> and -# Markus Lischka <mlischka@users.sourceforge.net> -# Reza Naima -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to -# be a hardware limitation. -# - - -begin remote - - name RM-0010 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - pre_data_bits 16 - pre_data 0xC03F - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - POWER 0x00000000000000FF - TV/FM 0x00000000000040BF - SCAN 0x000000000000A857 - DISPLAY 0x0000000000006897 - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - 0 0x00000000000048B7 - RECALL 0x0000000000008877 - ENTER 0x000000000000C837 - CC 0x000000000000F807 - MTS 0x000000000000D827 - FINE_DOWN 0x0000000000009867 - FINE_UP 0x00000000000018E7 - VIDEO 0x0000000000007887 - MUTE 0x00000000000028D7 - CH_UP 0x00000000000030CF - CH_DOWN 0x00000000000008F7 - VOL_DOWN 0x00000000000010EF - VOL_UP 0x00000000000020DF - FULLSCREEN 0x000000000000C03F - -# The following are only supported by the remote control bundled with -# the WinFast TV 2000 XP Deluxe card. - - SLEEP 0x00000000000002FD - BOSS_KEY 0x000000000000926D - RED 0x000000000000D22D - GREEN 0x00000000000032CD - YELLOW 0x000000000000B24D - BLUE 0x000000000000728D - PIP 0x00000000000052AD - . 0x000000000000827D - BACK 0x00000000000042BD - PLAY 0x000000000000C23D - NEXT 0x00000000000022DD - TIMESHIFT 0x000000000000A25D - STOP 0x000000000000629D - REC 0x000000000000E21D - SNAPSHOT 0x00000000000012ED - -# Only found on CoolCommand remote - - REPEAT 0x000000000000884B - TELETEXT 0x000000000000F807 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0007 deleted file mode 100644 index ef1992a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0007 +++ /dev/null @@ -1,36 +0,0 @@ -# -# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control). -# -# Made by Leandro Lucarella <luca@lugmen.org.ar> based on mainstream lirc -# Leadtek WinFast2000TV (RM-0010 remote control). -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * BLUE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH_UP -MOVE_OUT * CH_DOWN - -BUTTON1_TOGGLE * RETURN -BUTTON2_TOGGLE * 0 -BUTTON3_TOGGLE * DISPLAY - -BUTTON1_CLICK * MENU -BUTTON1_CLICK * 5 -BUTTON2_CLICK * FM -BUTTON3_CLICK * PC/TV - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0010 deleted file mode 100644 index ce0eff4..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/leadtek/lircmd.conf.RM-0010 +++ /dev/null @@ -1,36 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * SCAN - -MOVE_N * 2 -MOVE_N * CH_UP -MOVE_NE * 3 -MOVE_E * 6 -MOVE_E * VOL_UP -MOVE_SE * 9 -MOVE_S * 8 -MOVE_S * CH_DOWN -MOVE_SW * 7 -MOVE_W * 4 -MOVE_W * VOL_DOWN -MOVE_NW * 1 -MOVE_IN * VIDEO -MOVE_OUT * MUTE - -BUTTON1_TOGGLE * RECALL -BUTTON2_TOGGLE * 0 -BUTTON3_TOGGLE * ENTER - -BUTTON1_CLICK * FULLSCREEN -BUTTON2_CLICK * FINE_DOWN -BUTTON3_CLICK * FINE_UP - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircd.conf.flyvideo deleted file mode 100644 index 6402ed0..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircd.conf.flyvideo +++ /dev/null @@ -1,87 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002 -# -# contributed by Jarek Zuk -# -# brand: LiveView -# devices being controlled by this remote: -# FlyVideo II -# FlyVideo'98 -# FlyVideo 98/FM /2000S -# Flyvideo 98FM (LR50Q) -# Typhoon TView TV/FM Tuner -# - -begin remote - - name flyvideo - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 4500 - pre_data_bits 26 - pre_data 0x01A1F2F - gap 108000 - toggle_bit 0 - - frequency 37916 - duty_cycle 33 - - begin codes - 0 0x000000000000F00F - 1 0x000000000000C03F - 2 0x00000000000020DF - 3 0x000000000000A05F - 4 0x000000000000E01F - 5 0x00000000000010EF - 6 0x000000000000906F - 7 0x000000000000D02F - 8 0x00000000000030CF - 9 0x000000000000B04F - POWER 0x00000000000000FF - MOUSE_MODE 0x000000000000807F - FULL_SCREEN 0x00000000000040BF - CHAN_PLUS 0x00000000000048B7 - CHAN_MINUS 0x000000000000C837 - CANCEL 0x000000000000F807 - ENTER 0x00000000000008F7 - VOL_PLUS 0x00000000000028D7 - VOL_MINUS 0x000000000000E817 - MENU 0x000000000000609F - UP 0x000000000000708F - DOWN 0x0000000000009867 - LEFT 0x000000000000609F - RIGHT 0x000000000000A857 - INC 0x00000000000050AF - DEC 0x0000000000006897 - ESC 0x00000000000058A7 - MUTE 0x000000000000D827 - RETURN 0x00000000000018E7 - CENTER 0x000000000000C837 - - CHANELS 0x00000000000047B8 - REV 0x0000000000008778 - FWD 0x000000000000C738 - VIDEO 0x0000000000008877 - -# from FlyVideo II config file - Audio 0x000000000000A857 -# newly added by Jarek Zuk - SQUARE 0x000000000000B847 - TAB_LEFT 0x0000000000007887 - TAB_RIGHT 0x00000000000038C7 - CENTER 0x000000000000C837 - LEFT 0x00000000000048B7 - - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircmd.conf.flyvideo deleted file mode 100644 index 71cac36..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircmd.conf.flyvideo +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file for FlyVideo98 remote control -# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl> -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -#ACCELERATOR 2 30 5 - -ACTIVATE * MOUSE_MODE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_PLUS -MOVE_OUT * VOL_MINUS - -BUTTON1_CLICK * CANCEL -BUTTON2_CLICK * 0 -BUTTON3_CLICK * ENTER - -BUTTON1_TOGGLE * UP -BUTTON2_TOGGLE * VIDEO -BUTTON3_TOGGLE * INC diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircrc.flyvideo deleted file mode 100644 index 2175201..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/lircrc.flyvideo +++ /dev/null @@ -1,131 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl> -# -begin - button = MOUSE_MODE - mode = mouse -end -begin - prog = irexec - button = FULL_SCREEN - config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 & - mode = tv - flags = once -end -begin - button = ESC - mode = system - flags = once -end -begin system - begin - prog = irexec - button = 1 - button = 2 - button = 3 - button = 6 - button = 3 - button = 6 - config = shutdown -r now - flags = mode - end -end system - -begin tv - begin - prog = irxevent - button = POWER - config = Key q xawtv - flags = mode - end - begin - prog = irxevent - button = FULL_SCREEN - config = Key f xawtv - config = Key f xawtv - repeat = 1 - end - begin - prog = irxevent - button = CHAN_MINUS - repeat = 1 - config = Key Page_Down xawtv - end - begin - prog = irxevent - button = CHAN_PLUS - repeat = 1 - config = Key Page_Up xawtv - end - begin - prog = irxevent - button = MENU - repeat = 1 - config = Key c xawtv - end - begin - prog = irxevent - button = CHANELS - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = irxevent - button = MUTE - config = Key Return xawtv - end - begin - prog = irxevent - button = VOL_PLUS - repeat = 1 - config = Key KP_Add xawtv - end - begin - prog = irxevent - button = VOL_MINUS - repeat = 1 - config = Key KP_Subtract xawtv - end - begin - prog = irexec - button = 1 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = 2 - config = xawtv-remote setstation 1 - end - begin - prog = irexec - button = 3 - config = xawtv-remote setstation 2 - end - begin - prog = irexec - button = 4 - config = xawtv-remote setstation 3 - end - begin - prog = irexec - button = 5 - config = xawtv-remote setstation 4 - end - begin - prog = irexec - button = 6 - config = xawtv-remote setstation 5 - end - begin - prog = irexec - button = 7 - config = xawtv-remote setstation 6 - end - begin - prog = irexec - button = 8 - config = xawtv-remote setstation 7 - end -end tv
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/life-view/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircd.conf.logitech deleted file mode 100644 index 1960b6f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircd.conf.logitech +++ /dev/null @@ -1,111 +0,0 @@ -# -# -# contributed by Isaac Lauer -# -# brand: Logitech -# model: Value Infrared Remote Control -# supported devices: -# - -begin remote - - name Logitech - bits 8 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 8 - pre_data 0xA0 - gap 29858 - repeat_bit 0 - - begin codes - POWER 0x0000000000000002 - 1 0x0000000000000015 - 2 0x0000000000000016 - 3 0x0000000000000014 - 4 0x0000000000000018 - 5 0x0000000000000019 - 6 0x0000000000000017 - 7 0x000000000000001C - 8 0x000000000000001B - 9 0x000000000000001A - 0 0x000000000000001D - PAUSE 0x0000000000000013 - EJECT 0x0000000000000011 - SEEK- 0x000000000000000E - PLAY 0x000000000000000F - SEEK+ 0x0000000000000010 - STOP 0x0000000000000012 - HELP 0x0000000000000001 - CH- 0x000000000000000D - CH+ 0x000000000000000A - VOL- 0x000000000000000C - VOL+ 0x0000000000000009 - * 0x000000000000001F - # 0x000000000000001E - MUTE 0x000000000000000B - BUTTONL_DOWN 0x0000000000000039 - BUTTONR_DOWN 0x000000000000003A - BUTTON_UP 0x0000000000000038 - ENTER 0x0000000000000008 - CLOSE 0x0000000000000023 - TV 0x0000000000000004 - GDE 0x0000000000000005 - CD 0x0000000000000006 - MSG 0x0000000000000007 - PHONE 0x0000000000000003 - MOUSE_N 0x0000000000000040 - MOUSE_NNE 0x0000000000000041 - MOUSE_NE 0x0000000000000042 - MOUSE_NEE 0x0000000000000043 - MOUSE_E 0x0000000000000044 - MOUSE_SEE 0x0000000000000045 - MOUSE_SE 0x0000000000000046 - MOUSE_SSE 0x0000000000000047 - MOUSE_S 0x0000000000000048 - MOUSE_SSW 0x0000000000000049 - MOUSE_SW 0x000000000000004A - MOUSE_SWW 0x000000000000004B - MOUSE_W 0x000000000000004C - MOUSE_NWW 0x000000000000004D - MOUSE_NW 0x000000000000004E - MOUSE_NNW 0x000000000000004F - MOUSE_N 0x0000000000000050 - MOUSE_NNE 0x0000000000000051 - MOUSE_NE 0x0000000000000052 - MOUSE_NEE 0x0000000000000053 - MOUSE_E 0x0000000000000054 - MOUSE_SEE 0x0000000000000055 - MOUSE_SE 0x0000000000000056 - MOUSE_SSE 0x0000000000000057 - MOUSE_S 0x0000000000000058 - MOUSE_SSW 0x0000000000000059 - MOUSE_SW 0x000000000000005A - MOUSE_SWW 0x000000000000005B - MOUSE_W 0x000000000000005C - MOUSE_NWW 0x000000000000005D - MOUSE_NW 0x000000000000005E - MOUSE_NNW 0x000000000000005F - MOUSE_N 0x0000000000000060 - MOUSE_NNE 0x0000000000000061 - MOUSE_NE 0x0000000000000062 - MOUSE_NEE 0x0000000000000063 - MOUSE_E 0x0000000000000064 - MOUSE_SEE 0x0000000000000065 - MOUSE_SE 0x0000000000000066 - MOUSE_SSE 0x0000000000000067 - MOUSE_S 0x0000000000000068 - MOUSE_SSW 0x0000000000000069 - MOUSE_SW 0x000000000000006A - MOUSE_SWW 0x000000000000006B - MOUSE_W 0x000000000000006C - MOUSE_NWW 0x000000000000006D - MOUSE_NW 0x000000000000006E - MOUSE_NWW 0x000000000000006F - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircmd.conf.logitech deleted file mode 100644 index d8067f5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/logitech/lircmd.conf.logitech +++ /dev/null @@ -1,64 +0,0 @@ -# -# lircmd config file for the Logitech control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - -MOVE_N Logitech MOUSE_N -MOVE_N Logitech MOUSE_N - -MOVE_N Logitech MOUSE_NNE -MOVE_NE Logitech MOUSE_NNE - -MOVE_NE Logitech MOUSE_NE -MOVE_NE Logitech MOUSE_NE - -MOVE_E Logitech MOUSE_NEE -MOVE_NE Logitech MOUSE_NEE - -MOVE_E Logitech MOUSE_E -MOVE_E Logitech MOUSE_E - -MOVE_E Logitech MOUSE_SEE -MOVE_SE Logitech MOUSE_SEE - -MOVE_SE Logitech MOUSE_SE -MOVE_SE Logitech MOUSE_SE - -MOVE_S Logitech MOUSE_SSE -MOVE_SE Logitech MOUSE_SSE - -MOVE_S Logitech MOUSE_S -MOVE_S Logitech MOUSE_S - -MOVE_S Logitech MOUSE_SSW -MOVE_SW Logitech MOUSE_SSW - -MOVE_SW Logitech MOUSE_SW -MOVE_SW Logitech MOUSE_SW - -MOVE_W Logitech MOUSE_SWW -MOVE_SW Logitech MOUSE_SWW - -MOVE_W Logitech MOUSE_W -MOVE_W Logitech MOUSE_W - -MOVE_W Logitech MOUSE_NWW -MOVE_NW Logitech MOUSE_NWW - -MOVE_NW Logitech MOUSE_NW -MOVE_NW Logitech MOUSE_NW - -MOVE_N Logitech MOUSE_NNW -MOVE_NW Logitech MOUSE_NNW - -BUTTON1_DOWN Logitech BUTTONL_DOWN -BUTTON2_DOWN Logitech BUTTONR_DOWN - -BUTTON1_UP Logitech BUTTON_UP -BUTTON2_UP Logitech BUTTON_UP diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd-mceusb.conf deleted file mode 100644 index ec3b73e..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd-mceusb.conf +++ /dev/null @@ -1,88 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - - begin codes - -# starts at af - Radio 0x00007baf - Print 0x00007bb1 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 -# no ba - d8 - Guide 0x00007bd9 - LiveTV 0x00007bda - DVD 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf - Down 0x00007be0 - Up 0x00007be1 -# no e2,e3 - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChanDown 0x00007bec - ChanUp 0x00007bed - VolDown 0x00007bee - VolUp 0x00007bef - More 0x00007bf0 - Mute 0x00007bf1 - Home 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd.conf.mceusb deleted file mode 100644 index 041c2cb..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircd.conf.mceusb +++ /dev/null @@ -1,104 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Updated with codes for MCE 2005 Remote additional buttons -# *, #, Teletext, Red, Green, Yellow & Blue Buttons -# Note: TV power button transmits no code until programmed. -# Updated 12th September 2005 -# Graham Auld - mce|graham.auld.me.uk -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - - begin codes - - Blue 0x00007ba1 - Yellow 0x00007ba2 - Green 0x00007ba3 - Red 0x00007ba4 - Teletext 0x00007ba5 - -# starts at af - Radio 0x00007baf - Print 0x00007bb1 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 -# no ba - d8 - - Guide 0x00007bd9 - LiveTV 0x00007bda - DVD 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf - Down 0x00007be0 - Up 0x00007be1 - - Star 0x00007be2 - Hash 0x00007be3 - - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChanDown 0x00007bec - ChanUp 0x00007bed - VolDown 0x00007bee - VolUp 0x00007bef - More 0x00007bf0 - Mute 0x00007bf1 - Home 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircrc-mceusb deleted file mode 100644 index 3738bfa..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/lircrc-mceusb +++ /dev/null @@ -1,393 +0,0 @@ -# lircrc.mceusb - -################### -# -# MythTV -# -################### -begin - prog = mythtv - button = One - config = 1 -end - -begin - prog = mythtv - button = Two - config = 2 -end - -begin - prog = mythtv - button = Three - config = 3 -end - -begin - prog = mythtv - button = Four - config = 4 -end - -begin - prog = mythtv - button = Five - config = 5 -end - -begin - prog = mythtv - button = Six - config = 6 -end - -begin - prog = mythtv - button = Seven - config = 7 -end - -begin - prog = mythtv - button = Eight - config = 8 -end - -begin - prog = mythtv - button = Nine - config = 9 -end - -begin - prog = mythtv - button = Zero - config = 0 -end - -begin - prog = mythtv - button = Back - config = Esc -end - -begin - prog = mythtv - button = Guide - config = M -end - -begin - prog = mythtv - button = More - config = I -end - -begin - prog = mythtv - button = VolDown - config = F10 -end - -begin - prog = mythtv - button = VolUp - config = F11 -end - -begin - prog = mythtv - button = Up - config = Up -end - -begin - prog = mythtv - button = Down - config = Down -end - -begin - prog = mythtv - button = Left - config = Left -end - -begin - prog = mythtv - button = Right - config = Right -end - -begin - prog = mythtv - button = Play - config = Return -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = Mute - config = | -end - -begin - prog = mythtv - button = Rewind - config = Left -end - -begin - prog = mythtv - button = Forward - config = Right -end - -begin - prog = mythtv - button = Record - config = R -end - -begin - prog = mythtv - button = Stop - config = O -end - -begin - prog = mythtv - button = Pause - config = P -end - -# Use for backwards commercial skip -begin - prog = mythtv - button = Replay - config = Q -end - -# Use for forward commercial skip -begin - prog = mythtv - button = Skip - config = Z -end - - -################### -# -# MPlayer -# -################### -begin - prog = mplayer - button = Stop - config = quit -end - -begin - prog = mplayer - button = Play - config = seek +1 -end - -begin - prog = mplayer - button = More - config = osd -end - -begin - prog = mplayer - button = Replay - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = Skip - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = Rewind - config = seek -30 - repeat = 1 -end - -begin - prog = mplayer - button = Forward - config = seek +30 - repeat = 1 -end - -begin - prog = mplayer - button = Pause - config = pause -end - -begin - prog = mplayer - button = VolUp - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = VolDown - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = Mute - config = mute -end - -################### -# -# Xine -# -################### -# Xine lirc setup -begin -prog = xine -button = Play -repeat = 3 -config = Play -end - -begin -prog = xine -button = Stop -repeat = 3 -config = Stop -end - -begin -prog = xine -button = Back -repeat = 3 -config = Quit -end - -begin -prog = xine -button = Pause -repeat = 3 -config = Pause -end - -begin -prog = xine -button = Up -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = Down -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = Left -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = Right -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = Home -repeat = 3 -config = Menu -end - -begin -prog = xine -button = Forward -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = Rewind -repeat = 3 -config = SpeedSlower -end - -begin -prog = xine -button = VolUp -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VolDown -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = Mute -repeat = 3 -config = Mute -end - -begin -prog = xine -button = ChanUp -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = ChanDown -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = More -repeat = 3 -config = OSDStreamInfos -end - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/preview.jpg Binary files differdeleted file mode 100644 index 0aa6a4a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/mceusb/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/no_remote/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/no_remote/preview.jpg Binary files differdeleted file mode 100644 index 1d887dd..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/no_remote/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/LinHES-config-SVN/templates/remotes/packard_bell/lircd.conf.packard_bell deleted file mode 100644 index b63ab25..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/packard_bell/lircd.conf.packard_bell +++ /dev/null @@ -1,94 +0,0 @@ -# Config file for Packard Bell Remotes (with repeat codes!) -# created by Samuel Wood (sjw@umr.edu) -# -# brand: Packard Bell Remote -# model: El Cheapo Packard Bell Remote -# -# This is a config file for the cheap excess Packard Bell remotes -# you sometimes can buy from online auctions like www.onsale.com. -# -# The receiver that comes with it hooks into the serial port and works -# fine with lirc 0.5.4. -# -# The receiver that comes with the remote is near garbage. If -# you don't point almost directly at it, it will not detect. But -# it's simpler than building your own. :-) -# -# Repeat works fine for me. You just have to modify or add the -# "repeat=" lines in your .lircrc. -# -# irrecord was used to generate the file, then I modified and -# added repeat codes. -# -# The button names used are identical to what was printed on the -# remote, except for the number pads (using actual numbers like -# "1" and so forth did not seem to work. Similarly, '*' is Star -# and '#' is Hash. LMB and RMB refer to the two mousepad buttons -# on the left and right respectively. -# -# I still need to modify the gap setting. Right now, if you don't -# hold the button down long enough, it may not register, but if -# you hold it too long, it will detect a repeat or two. Feel free -# to modify this to work better. If you get it to work better, send -# me a copy. :-) - -begin remote - - name PackBell - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9065 4500 - one 597 532 - zero 597 1643 - ptrail 597 - pre_data_bits 16 - pre_data 0xF708 - post_data_bits 1 - post_data 0x0 - gap 107000 - repeat_bit 0 - repeat 9050 2250 - - begin codes - Help 0x0000000000006F90 - Phone 0x0000000000004FB0 - Message 0x0000000000006E91 - SRS 0x0000000000004EB1 - CD 0x0000000000002FD0 - Aux1 0x0000000000000FF0 - Aux2 0x0000000000002ED1 - Aux3 0x0000000000000EF1 - LMB 0x00000000000023DC - RMB 0x000000000000639C - Up 0x00000000000037C8 - Down 0x00000000000057A8 - Left 0x0000000000007788 - Right 0x00000000000017E8 - Menu 0x0000000000007B84 - Mute 0x0000000000003BC4 - Enter 0x00000000000047B8 - CHUp 0x00000000000027D8 - CHDown 0x0000000000006798 - VolUp 0x0000000000005BA4 - VolDown 0x0000000000001BE4 - Display 0x00000000000007F8 - One 0x0000000000005EA1 - Two 0x0000000000001EE1 - Three 0x0000000000000BF4 - Four 0x0000000000007E81 - Five 0x0000000000003EC1 - Six 0x0000000000004BB4 - Seven 0x0000000000005FA0 - Eight 0x0000000000001FE0 - Nine 0x0000000000002BD4 - Zero 0x0000000000003FC0 - Star 0x0000000000007F80 - Hash 0x0000000000006B94 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircd.conf.pcmak deleted file mode 100644 index 0a11e58..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircd.conf.pcmak +++ /dev/null @@ -1,116 +0,0 @@ -# -# -# contributed by P_awe_L pablozrudnika@wp.pl -# -# brand: PC MAK/MINIMAK LASER/MINIMAK -# model: Value Infrared Remote Control -# supported devices: PC MAK receiver -# - -begin remote - - name PC_MAK - bits 8 - flags SPACE_ENC|CONST_LENGTH - eps 15 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 8 - pre_data 0xAA - gap 100000 - repeat_bit 0 - - begin codes - HOME 0x0000000000000001 - ARROW_UP 0x0000000000000002 - PG_UP 0x0000000000000003 - ARROW_LEFT 0x0000000000000004 - ENTER 0x0000000000000005 - ARROW_RIGHT 0x0000000000000006 - END 0x0000000000000007 - ARROW_DOWN 0x0000000000000008 - PG_DN 0x0000000000000009 - SPACE 0x000000000000000A - TAB 0x000000000000000B - ESC 0x000000000000000C - ALT 0x000000000000000D - PLAYLIST 0x000000000000000E - LOAD 0x000000000000000F - MOUSE_N 0x0000000000000010 - MOUSE_NE 0x0000000000000011 - MOUSE_E 0x0000000000000012 - MOUSE_SE 0x0000000000000013 - MOUSE_S 0x0000000000000014 - MOUSE_SW 0x0000000000000015 - MOUSE_W 0x0000000000000016 - MOUSE_NW 0x0000000000000017 - FULLSCREEN 0x0000000000000018 - BUTTONL_DOWN 0x0000000000000019 - BUTTONR_DOWN 0x000000000000001A - POWER 0x000000000000001B - A 0x000000000000001C - B 0x000000000000001D - C 0x000000000000001E - D 0x000000000000001F - VOL_DOWN 0x0000000000000020 - MUTE 0x0000000000000021 - VOL_UP 0x0000000000000022 - PLAY 0x0000000000000024 - PREV 0x0000000000000026 - PAUSE 0x0000000000000027 - NEXT 0x0000000000000028 - SKIP_BACK 0x0000000000000029 - STOP 0x000000000000002A - SKIP_FORW 0x000000000000002B - 1 0x0000000000000041 - 2 0x0000000000000042 - 3 0x0000000000000043 - 4 0x0000000000000044 - 5 0x0000000000000045 - 6 0x0000000000000046 - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x000000000000004A - sTAB 0x000000000000004B - sESC 0x000000000000004C - sALT 0x000000000000004D - sPLAYLIST 0x000000000000004E - TXT 0x000000000000004F - sMOUSE_N 0x0000000000000050 - sMOUSE_NE 0x0000000000000051 - sMOUSE_E 0x0000000000000052 - sMOUSE_SE 0x0000000000000053 - sMOUSE_S 0x0000000000000054 - sMOUSE_SW 0x0000000000000055 - sMOUSE_W 0x0000000000000056 - sMOUSE_NW 0x0000000000000057 - sOK 0x0000000000000058 - BUTTONL_UP 0x0000000000000059 - BUTTONR_UP 0x000000000000005A - EXIT 0x000000000000005B - E 0x000000000000005C - F 0x000000000000005D - G 0x000000000000005E - H 0x000000000000005F - sVOL_DOWN 0x0000000000000060 - sMUTE 0x0000000000000061 - sVOL_UP 0x0000000000000062 - sPLAY 0x0000000000000064 - sPREV 0x0000000000000066 - sPAUSE 0x0000000000000067 - sNEXT 0x0000000000000068 - ZOOM- 0x0000000000000069 - HELP 0x000000000000006A - ZOOM+ 0x000000000000006B - MM_PLAY 0x000000000000002F - MM_PREV 0x0000000000000030 - MM_NEXT 0x0000000000000031 - MM_PAUSE 0x000000000000005F - MM_BACK 0x0000000000000075 - MM_FORW 0x0000000000000079 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircmd.conf.pcmak deleted file mode 100644 index d7c8dcf..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircmd.conf.pcmak +++ /dev/null @@ -1,29 +0,0 @@ -# -# lircmd config file for the PC_MAK control -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 25 2 - -#ACTIVATE * MENU - -MOVE_N PC_MAK MOUSE_N -MOVE_NE PC_MAK MOUSE_NE - -MOVE_E PC_MAK MOUSE_E -MOVE_SE PC_MAK MOUSE_SE - -MOVE_S PC_MAK MOUSE_S -MOVE_SW PC_MAK MOUSE_SW - -MOVE_W PC_MAK MOUSE_W -MOVE_NW PC_MAK MOUSE_NW - -BUTTON1_CLICK PC_MAK BUTTONL_DOWN -BUTTON3_CLICK PC_MAK BUTTONR_DOWN - -BUTTON1_TOGGLE PC_MAK BUTTONL_UP -BUTTON3_TOGGLE PC_MAK BUTTONR_UP diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircrc.pcmak deleted file mode 100644 index 414e38a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/lircrc.pcmak +++ /dev/null @@ -1,1310 +0,0 @@ -##################################################################### -# contributed by P_awe_L pablozrudnika@wp.pl -##################################################################### -# -# XMMS -# -##################################################################### -begin xmms - begin - prog = irxevent - button = LOAD - config = Key shift-L xmms - end - begin - prog = xmms - button = play - config = PLAY - end - begin - prog = irxevent - remote = * - button = PLAYLIST - config = Key alt-e XMMS - end - begin - prog = irxevent - remote = * - button = FULLSCREEN - config = Key ctrl-d XMMS - end - begin - prog = xmms - button = TXT - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = pause - config = PAUSE - end - begin - prog = xmms - button = stop - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - end - begin - prog = xmms - button = NEXT - config = NEXT - end - begin - prog = xmms - button = PREV - config = PREV - end - begin - prog = xmms - button = SKIP_FORW - repeat = 2 - config = FWD 3 - end - begin - prog = xmms - button = SKIP_BACK - repeat = 2 - config = BWD 3 - end - begin - prog = xmms - button = VOL_UP - repeat = 2 - config = VOL_UP 5 - end - begin - prog = xmms - remote = * - button = H - repeat = 2 - config = VOL_DOWN 5 - end -end xmms -##################################################################### -# -# MPlayer -# -##################################################################### -begin mplayer - begin - prog = mplayer - remote = * - button = PLAYLIST - config = gui_playlist - end - begin - prog = mplayer - remote = * - button = LOAD - config = gui_loadfile - end - begin - prog = mplayer - remote = * - button = TXT - config = gui_loadsubtitle - end - begin - prog = mplayer - remote = * - button = FULLSCREEN - config = vo_fullscreen - end - begin - prog = mplayer - remote = * - button = MUTE - config = mute - end - begin - prog = mplayer - remote = * - button = SKIP_FORW - repeat = 1 - config = seek +10 - end - begin - prog = mplayer - remote = * - button = VOL_DOWN - repeat = 1 - config = volume -1 - end - begin - prog = mplayer - remote = * - button = VOL_UP - repeat = 1 - config = volume 1 - end - begin - prog = mplayer - remote = * - button = SKIP_BACK - repeat = 1 - config = seek -10 - end - begin - prog = mplayer - button = play - config = pause - end - begin - prog = mplayer - button = pause - config = pause - end - begin - prog = mplayer - button = stop - config = seek 0 1\npause - end - begin - prog = mplayer - button = NEXT - config = pt_step 1 - end - begin - prog = mplayer - button = PREV - config = pt_step -1 - end - begin - prog = mplayer - button = EXIT - config = quit - end -end mplayer -##################################################################### -# -# GQview -# -##################################################################### -begin gqview - begin - prog = irxevent - remote = * - button = EXIT - config = Key ctrl-q GQview - end - begin - prog = irxevent - remote = * - button = FULLSCREEN - config = Key v GQview - end - begin - prog = irxevent - remote = * - button = PREV - repeat = 5 - config = Key Prior GQview - end - begin - prog = irxevent - remote = * - button = SKIP_BACK - config = Key Home GQview - end - begin - prog = irxevent - remote = * - button = SKIP_FORW - config = Key End GQview - end - begin - prog = irxevent - remote = * - button = NEXT - repeat = 5 - config = Key Next GQview - end - begin - prog = irxevent - button = ZOOM- - repeat = 5 - config = Key minus GQview - end - begin - prog = irxevent - button = ZOOM+ - repeat = 5 - config = Key plus GQview - end - begin - prog = irxevent - button = C - config = Key s GQview - end - begin - prog = irxevent - button = LOAD - config = Key o GQview - end -end gqview -##################################################################### -# -# Sterowanie Xwindow Linuxa -# -##################################################################### -begin linux - begin - prog = irexec - button = PAUSE - config = xscreensaver-command -activate - end - begin - prog = irxevent - button = sNEXT - config = Key alt-Escape RootWindow - end - begin - prog = irxevent - button = sPREV - config = Key alt-shift-Escape RootWindow - end - begin - prog = irexec - button = STOP - config = xset dpms force off - end - begin - prog = irexec - button = PLAY - config = xset dpms force on - end - begin - prog = irexec - button = EXIT - config = poweroff - end -end linux -##################################################################### -# -# Xine -# -##################################################################### -# Reduce the output window size. -begin xine - begin - prog = xine - button = xxxxx - config = WindowReduce - end - # Enlarge the output window size. - begin - prog = xine - button = xxxxx - config = WindowEnlarge - end - # Select next sub picture (subtitle) channel. - begin - prog = xine - button = NEXT - config = SpuNext - end - # Select previous sub picture (subtitle) channel. - begin - prog = xine - button = PREV - config = SpuPrior - end - # Visibility toggle of control window. - begin - prog = xine - button = xxxxx - config = ControlShow - end - # Visibility toggle of output window visibility. - begin - prog = xine - button = xxxxx - config = ToggleWindowVisibility - end - # Select next audio channel. - begin - prog = xine - button = xxxxx - config = AudioChannelNext - end - # Select previous audio channel. - begin - prog = xine - button = xxxxx - config = AudioChannelPrior - end - # Visibility toggle of playlist editor window. - begin - prog = xine - button = PLAYLIST - config = PlaylistEditor - end - # Playback pause toggle. - begin - prog = xine - button = PAUSE - config = Pause - end - # Visibility toggle of UI windows. - begin - prog = xine - button = xxxxx - config = ToggleVisiblity - end - # Fullscreen toggle. - begin - prog = xine - button = FULLSCREEN - config = ToggleFullscreen - end - # Aspect ratio values toggle. - begin - prog = xine - button = xxxxx - config = ToggleAspectRatio - end - # Interlaced mode toggle. - begin - prog = xine - button = xxxxx - config = ToggleInterleave - end - # Quit the program. - begin - prog = irxevent - button = EXIT - config = Key q xine - end - # Start playback. - begin - prog = xine - button = PLAY - config = Play - end - # Visibility toggle of the setup window. - begin - prog = xine - button = xxxxx - config = SetupShow - end - # Stop playback. - begin - prog = xine - button = STOP - config = Stop - end - # Select and play next mrl in the playlist. - begin - prog = xine - button = xxxxx - config = NextMrl - end - # Select and play previous mrl in the playlist. - begin - prog = xine - button = xxxxx - config = PriorMrl - end - # Eject the current medium. - begin - prog = xine - button = xxxxx - config = Eject - end - # Set position to beginning of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition0% - end - # Set position to 10% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition10% - end - # Set position to 20% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition20% - end - # Set position to 30% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition30% - end - # Set position to 40% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition40% - end - # Set position to 50% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition50% - end - # Set position to 60% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition60% - end - # Set position to 70% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition70% - end - # Set position to 80% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition80% - end - # Set position to 90% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition90% - end - # Set position to -60 seconds in current stream. - begin - prog = xine - button = xxxxx - config = SeekRelative-60 - end - # Set position to +60 seconds in current stream. - begin - prog = xine - button = xxxxx - config = SeekRelative+60 - end - # Set position to -15 seconds in current stream. - begin - prog = xine - button = SKIP_BACK - config = SeekRelative-15 - end - # Set position to +15 seconds in current stream. - begin - prog = xine - button = SKIP_FORW - config = SeekRelative+15 - end - # Visibility toggle of mrl browser window. - begin - prog = xine - button = xxxxx - config = MrlBrowser - end - # Audio muting toggle. - begin - prog = xine - button = MUTE - config = Mute - end - # Change audio syncing. - begin - prog = xine - button = xxxxx - config = AudioVideoDecay+ - end - # Change audio syncing. - begin - prog = xine - button = xxxxx - config = AudioVideoDecay- - end - # Reset audio video syncing offset. - begin - prog = xine - button = xxxxx - config = AudioVideoDecayReset - end - # Increment playback speed. - begin - prog = xine - button = xxxxx - config = SpeedFaster - end - # Decrement playback speed. - begin - prog = xine - button = xxxxx - config = SpeedSlower - end - # Increment audio volume. - begin - prog = xine - button = VOL_UP - config = Volume+ - end - # Decrement audio volume. - begin - prog = xine - button = VOL_DOWN - config = Volume- - end - # Take a snapshot (Internal image fetch and save). - begin - prog = xine - button = xxxxx - config = Snapshot - end - # Resize output window to stream size1:1. - begin - prog = xine - button = xxxxx - config = Zoom1:1 - end - # Grab pointer toggle. - begin - prog = xine - button = xxxxx - config = GrabPointer - end - # Menu 1 event. - begin - prog = xine - button = xxxxx - config = EventMenu1 - end - # Menu 2 event. - begin - prog = xine - button = xxxxx - config = EventMenu2 - end - # Menu 3 event. - begin - prog = xine - button = xxxxx - config = EventMenu3 - end - # Up event. - begin - prog = xine - button = xxxxx - config = EventUp - end - # Down event. - begin - prog = xine - button = xxxxx - config = EventDown - end - # Left event. - begin - prog = xine - button = xxxxx - config = EventLeft - end - # Right event. - begin - prog = xine - button = xxxxx - config = EventRight - end - # Previous event. - begin - prog = xine - button = xxxxx - config = EventPrior - end - # Next event. - begin - prog = xine - button = xxxxx - config = EventNext - end - # Previous angle event. - begin - prog = xine - button = xxxxx - config = EventAnglePrior - end - # Next angle event. - begin - prog = xine - button = xxxxx - config = EventAngleNext - end - # Select event. - begin - prog = xine - button = xxxxx - config = EventSelect - end - # Zoom into video. - begin - prog = xine - button = xxxxx - config = ZoomIn - end - # Zoom out of video. - begin - prog = xine - button = xxxxx - config = ZoomOut - end - # Zoom into video horizontally, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomInX - end - # Zoom out of video horizontally, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomOutX - end - # Zoom into video vertically, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomInY - end - # Zoom out of video vertically, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomOutY - end - # Reset zooming. - begin - prog = xine - button = xxxxx - config = ZoomReset - end - # Toggle TV modes on the DXR3 - begin - prog = xine - button = xxxxx - config = ToggleTVmode - end - # Visibility toggle of log viewer - begin - prog = xine - button = xxxxx - config = ViewlogShow - end -end xine -##################################################################### -# -# XAWTV -# -##################################################################### -begin xawtv - begin - prog = xawtv - remote = * - button = NEXT - config = setstation next - end - begin - prog = xawtv - remote = * - button = PREV - config = setstation prev - end - begin - prog = xawtv - remote = * - button = VOL_UP - config = volume inc - end - begin - prog = xawtv - remote = * - button = VOL_DOWN - config = volume dec - end - begin - prog = xawtv - remote = * - button = MUTE - config = volume mute - end - begin - prog = xawtv - remote = * - button = FULLSCREEN - config = fullscreen toggle - flags = once - end - begin - prog = xawtv - remote = * - button = PLAYLIST - config = setinput next - end - begin - prog = xawtv - remote = * - button = EXIT - config = quit - flags = once - end - begin - prog = xawtv - remote = * - button = ARROW_UP - config = keypad 1 - end - begin - prog = xawtv - remote = * - button = ARROW_UP - config = keypad 2 - end - begin - prog = xawtv - remote = * - button = PG_UP - config = keypad 3 - end - begin - prog = xawtv - remote = * - button = ARROW_LEFT - config = keypad 4 - end - begin - prog = xawtv - remote = * - button = ENTER - config = keypad 5 - end - begin - prog = xawtv - remote = * - button = ARROW_RIGHT - config = keypad 6 - end - begin - prog = xawtv - remote = * - button = END - config = keypad 7 - end - begin - prog = xawtv - remote = * - button = ARROW_DOWN - config = keypad 8 - end - begin - prog = xawtv - remote = * - button = PG_DN - config = keypad 9 - end - begin - prog = xawtv - remote = * - button = SPACE - config = keypad 0 - end -end xawtv -##################################################################### -# -# Xpdf -# -##################################################################### -begin xpdf - begin - prog = irxevent - remote = * - button = LOAD - config = Key o xpdf - end - begin - prog = irxevent - remote = * - button = PREV - config = Key p xpdf - end - begin - prog = irxevent - remote = * - button = NEXT - config = Key n xpdf - end - begin - prog = irxevent - remote = * - button = SKIP_BACK - config = Key BackSpace xpdf - end - begin - prog = irxevent - remote = * - button = SKIP_FORW - config = Key space xpdf - end - begin - prog = irxevent - remote = * - button = ZOOM- - config = Key minus xpdf - end - begin - prog = irxevent - remote = * - button = ZOOM+ - config = Key KP_Add xpdf - end - begin - prog = irxevent - remote = * - button = sPREV - config = Key z xpdf - end - begin - prog = irxevent - remote = * - button = sNEXT - config = Key w xpdf - end - begin - prog = irxevent - remote = * - button = EXIT - config = Key q xpdf - end -end xpdf -##################################################################### -# -# FREEVO -# In freevo_config.py variable LIRCRC have to show this file -# eg. LIRCRC = '/home/john/.lircrc' -##################################################################### -begin freevo - begin - prog = irexec - remote = * - button = POWER - config = freevo stop - end - begin - prog = freevo - remote = * - button = PLAYLIST - config = DISPLAY - end - begin - prog = freevo - remote = * - button = sPLAYLIST - config = SUBTITLE - end - begin - prog = freevo - remote = * - button = BUTTONR_DOWN - config = EXIT - end - begin - prog = freevo - remote = * - button = MOUSE_N - config = UP - end - begin - prog = freevo - remote = * - button = MOUSE_S - config = DOWN - end - begin - prog = freevo - remote = * - button = MOUSE_W - config = LEFT - end - begin - prog = freevo - remote = * - button = MOUSE_E - config = RIGHT - end - begin - prog = freevo - remote = * - button = BUTTONL_DOWN - config = SELECT - end - begin - prog = freevo - remote = * - button = FULLSCREEN - config = SELECT - end - begin - prog = freevo - remote = * - button = MUTE - config = MUTE - end - begin - prog = freevo - remote = * - button = VOL_UP - config = VOL+ - end - begin - prog = freevo - remote = * - button = VOL_DOWN - config = VOL- - end - begin - prog = freevo - remote = * - button = NEXT - config = CH+ - end - begin - prog = freevo - remote = * - button = PREV - config = CH- - end - begin - prog = freevo - remote = * - button = sPREV - config = PREV_CH - end - begin - prog = freevo - button = sNEXT - config = NEXT_CH - end - begin - prog = freevo - button = SKIP_BACK - config = REW - end - begin - prog = freevo - button = SKIP_FORW - config = FFWD - end - begin - prog = freevo - remote = * - button = PLAY - config = PLAY - end - begin - prog = freevo - remote = * - button = PAUSE - config = PAUSE - end - begin - prog = freevo - remote = * - button = STOP - config = STOP - end - begin - prog = freevo - remote = * - button = sPLAY - config = REC - end - begin - prog = freevo - remote = * - button = HELP - repeat = 10 - config = EJECT - end - begin - prog = freevo - remote = * - button = HOME - config = - end - begin - prog = freevo - remote = * - button = ARROW_UP - config = - end - begin - prog = freevo - remote = * - button = PG_UP - config = - end - begin - prog = freevo - remote = * - button = ARROW_LEFT - config = - end - begin - prog = freevo - remote = * - button = ENTER - config = - end - begin - prog = freevo - remote = * - button = ARROW_RIGHT - config = - end - begin - prog = freevo - remote = * - button = END - config = - end - begin - prog = freevo - remote = * - button = ARROW_DOWN - config = - end - begin - prog = freevo - remote = * - button = PG_DN - config = - end - begin - prog = freevo - remote = * - button = SPACE - config = - end - begin - prog = freevo - remote = * - button = TAB - config = - end - begin - prog = freevo - remote = * - button = ESC - config = - end - begin - prog = freevo - remote = * - button = ALT - config = - end -end freevo -##################################################################### -# -# Wybor aplikacji -# -##################################################################### -begin - prog = irexec - button = A - config = xmms& - mode = xmms -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = B - config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi - mode = mplayer -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = C - config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi - mode = gqview -end -begin - prog = none - button = D - mode = linux -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - remote = * - button = E - config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi - mode = xine -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = F - config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi - mode = xawtv -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = G - config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi - mode = xpdf -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - remote = * - button = H - config = freevo& - mode = freevo -end -##################################################################### -# -# Klawisze Globalne -# -##################################################################### -begin - prog = irxevent - button = HOME - config = Key Home CurrentWindow -end -begin - prog = irxevent - button = ARROW_UP - repeat = 5 - config = Key Up CurrentWindow -end -begin - prog = irxevent - button = PG_UP - repeat = 5 - config = Key Page_Up CurrentWindow -end -begin - prog = irxevent - button = ARROW_LEFT - repeat = 5 - config = Key Left CurrentWindow -end -begin - prog = irxevent - button = ENTER - config = Key Return CurrentWindow -end -begin - prog = irxevent - button = ARROW_RIGHT - repeat = 5 - config = Key Right CurrentWindow -end -begin - prog = irxevent - button = END - config = Key End CurrentWindow -end -begin - prog = irxevent - button = ARROW_DOWN - repeat = 5 - config = Key Down CurrentWindow -end -begin - prog = irxevent - button = PG_DN - repeat = 5 - config = Key Page_Down CurrentWindow -end -begin - prog = irxevent - button = TAB - config = Key Tab CurrentWindow -end -begin - prog = irxevent - remote = * - button = sTAB - config = Key shift-Tab CurrentWindow -end -begin - prog = irxevent - button = SPACE - config = Key space CurrentWindow -end -begin - prog = irxevent - button = ESC - config = Key Escape CurrentWindow -end -begin - prog = irxevent - button = ALT - config = Key UP CurrentWindow -end -begin - prog = irxevent - button = 1 - config = Key 1 CurrentWindow -end -begin - prog = irxevent - button = 2 - config = Key 2 CurrentWindow -end -begin - prog = irxevent - button = 3 - config = Key 3 CurrentWindow -end -begin - prog = irxevent - remote = * - button = 4 - config = Key 4 CurrentWindow -end -begin - prog = irxevent - button = 5 - config = Key 5 CurrentWindow -end -begin - prog = irxevent - button = 6 - config = Key 6 CurrentWindow -end -begin - prog = irxevent - button = 7 - config = Key 7 CurrentWindow -end -begin - prog = irxevent - button = 8 - config = Key 8 CurrentWindow -end -begin - prog = irxevent - button = 9 - config = Key 9 CurrentWindow -end -begin - prog = irxevent - button = 0 - config = Key 0 CurrentWindow -end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/preview.jpg Binary files differdeleted file mode 100644 index d2ccdd1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pcmak/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/LinHES-config-SVN/templates/remotes/pinnacle_systems/lircd.conf.pctv deleted file mode 100644 index 4783e06..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pinnacle_systems/lircd.conf.pctv +++ /dev/null @@ -1,94 +0,0 @@ -# -# contributed by Bart Alewijnse <scarfboy@yahoo.com> -# -# brand: Pinnacle Systems -# model: PCTV Remote (Perhaps other ones as well) -# supported devices: there's only one I know of. (serial) -# -# Mail me if your remote is only partly supported, or if it has different -# buttons than listed below. -# - -begin remote - - name PinnacleSysPCTVRemote - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 180000 - - begin codes - Mute 0x000000000000003C - Power 0x000000000000002F - Chan+Play 0x000000000000003F - Chan-Stop 0x000000000000003E - Vol+FF 0x000000000000003B - Vol-Rew 0x000000000000003D - 1 0x0000000000000031 - 2 0x0000000000000032 - 3 0x0000000000000033 - 4 0x0000000000000034 - 5 0x0000000000000035 - 6 0x0000000000000036 - 7 0x0000000000000037 - 8 0x0000000000000038 - 9 0x0000000000000039 - Fullscreen 0x000000000000002D - 0/AV 0x000000000000003A - Info 0x000000000000002B - Preview 0x000000000000002E - Record 0x0000000000000027 - Chan_Last 0x0000000000000025 - F_TV 0x0000000000000026 - F_TELETEXT 0x0000000000000029 - F_RADIO 0x000000000000002A - -# -# here are some extra buttons a new version of the remote seems to have -# -# contributed by Robbert Monna <rjmonna@kabelfoon.nl> -# -# brand: Pinnacle Systems -# model: PCTV Remote (newest version?) -# supported devices: dongle on serial port (from TV-Card) -# - L 0x000000000000001F - Zoom 0x000000000000001E - vol+ 0x000000000000001B - vol- 0x000000000000000F - channel+ 0x0000000000000017 - channel- 0x000000000000001C - middle 0x000000000000001A - Menu 0x000000000000001D - next 0x0000000000000019 - undo 0x0000000000000016 - pause 0x0000000000000015 - redo 0x0000000000000013 - Rewind 0x000000000000000E - Play 0x000000000000000D - Stop 0x000000000000000B - FForward 0x0000000000000007 - EPG 0x0000000000000018 - -# here are some more buttons that seem to be mapped differently from -# the ones above - -# contributed by InterCeptor ceptor_7@freemail.hu -# -# brand: Pinnacle Systems PCTV Pro Remote -# model no. of remote control: (I can't find any numbers on it) -# supported devices: serial -# - - 9 0x0000000000000082 - Zoom 0x00000000000000B2 - middle 0x0000000000000014 - - - end codes -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv deleted file mode 100644 index 064ee57..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv +++ /dev/null @@ -1,34 +0,0 @@ -# -# contributed by Nathan Hand <nathanh@chirp.com.au> -# -# brand: Pixelview -# model: -# supported devices: Pixelview PlayTV PRO -# - -begin remote - name Pixelview - bits 8 - - begin codes - TV/FM 0x00000000000000e7 - FULL_SCREEN 0x00000000000000bf - CH+ 0x0000000000000049 - CH- 0x00000000000000c1 - VOL- 0x000000000000006a - VOL+ 0x000000000000004a - MUTE 0x0000000000000047 - SOURCE 0x00000000000000e1 - 1 0x00000000000000e0 - 2 0x00000000000000c8 - 3 0x00000000000000e8 - 4 0x0000000000000060 - 5 0x0000000000000062 - 6 0x00000000000000c9 - 7 0x00000000000000c0 - 8 0x00000000000000c2 - 9 0x0000000000000061 - 0 0x0000000000000040 - end codes -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_bt878 deleted file mode 100644 index f017a3b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_bt878 +++ /dev/null @@ -1,54 +0,0 @@ -# -# contributed by Michal Kochanowicz <mkochano@pld.org.pl> -# based on file contributred by Nathan Hand <nathanh@chirp.com.au> -# -# brand: PixelView -# model: BT878+W/FM -# supported devices: PixelView BT878+W/FM -# - -begin remote - name PixelView - bits 8 -# repeat_bit 2 - repeat 9080 2189 - gap 108056 - repeat_bit 0 - - begin codes - POWER 0x00000000000000aa - TV/FM 0x00000000000000e7 - TELETEXT 0x000000000000003f - SCAN 0x0000000000000041 - +/- 0x0000000000000069 - EJECT 0x000000000000002a - STOP 0x000000000000008a - SOURCE 0x00000000000000e1 - STEREO 0x00000000000000df - ENTER 0x000000000000005f - SEEK_NEXT 0x0000000000000067 - SEEK_FWD 0x00000000000000c7 - CH_UP 0x0000000000000049 - VOL_UP 0x000000000000004a - RECALL 0x0000000000000048 - PAUSE 0x0000000000000068 - PLAY 0x00000000000000ca - CH_DOWN 0x00000000000000c1 - VOL_DOWN 0x000000000000006a - SEEK_PREV 0x000000000000000a - SEEK_BACK 0x0000000000000042 - ZOOM 0x00000000000000bf - MUTE 0x0000000000000047 - 1 0x00000000000000e0 - 2 0x00000000000000c8 - 3 0x00000000000000e8 - 4 0x0000000000000060 - 5 0x0000000000000062 - 6 0x00000000000000c9 - 7 0x00000000000000c0 - 8 0x00000000000000c2 - 9 0x0000000000000061 - 0 0x0000000000000040 - end codes -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_pro deleted file mode 100644 index 84e84a9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.playtv_pro +++ /dev/null @@ -1,159 +0,0 @@ -# -# brand: PixelView -# model: PlayTV Pro remote control -# -# supported devices: -# works both with home-brew and TV card receiver (use lirc-0.6.6 or better) -# - - -begin remote - - name pixelviewp - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 200 - - pre_data_bits 16 - pre_data 0x61d6 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - - power 0x0000000000007887 - zoom 0x00000000000038C7 - scan 0x000000000000E01F - tv/fm 0x000000000000C03F - vol+ 0x000000000000F807 - vol- 0x000000000000E817 - chan+ 0x0000000000006897 - chan- 0x00000000000028D7 - mute 0x00000000000018E7 - source 0x00000000000000FF - loop 0x000000000000C837 - +100 0x00000000000008F7 - fn- 0x00000000000020DF - fn+ 0x00000000000030CF - reset 0x000000000000B04F - freeze 0x000000000000F00F - function 0x000000000000708F - 0 0x00000000000040BF - 1 0x000000000000807F - 2 0x000000000000D02F - 3 0x000000000000D827 - 4 0x000000000000A05F - 5 0x000000000000906F - 6 0x000000000000A857 - 7 0x000000000000609F - 8 0x00000000000050AF - 9 0x00000000000048B7 - - end codes - -end remote - - -# This config file was automatically generated -# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005 -# -# contributed by Thadeu A. Coelho de Paula -# thadeudepaula (at) gmail (dot) com -# http://mundolivre.hostrix.com.br -# -# brand: PixelView -# model: PlayTV MPEG2 (M4900) -# -# supported devices: -# This TV Card - - -begin remote - - name PixelView_PlayTV_MPEG2 - bits 16 - eps 30 - aeps 100 - - pre_data_bits 16 - pre_data 0x61D6 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - - - begin codes - timeshift 0xC03F - power 0x7887 - 1 0x807F - 2 0xD02F - 3 0xD827 - 4 0xA05F - 5 0x906F - 6 0xA857 - 7 0x609F - 8 0x50AF - 9 0x48B7 - 0 0x40BF - loop 0xC837 - +100 0x08F7 - source 0x00FF - mute 0x18E7 - ch+ 0x6897 - ch- 0x28D7 - vol+ 0xF807 - vol- 0xE817 - zoom 0x38C7 - snapshot 0x9867 - scan 0x58A7 - bw 0x20DF - rec 0x708F - fw 0x30CF - stop 0xB847 - play 0x10EF - pause 0xF00F - tv 0xB04F - fm 0xE01F - end codes - -end remote - -# CONTROL LAYOUT: -# -# TIMESHIFT POWER -# -# 1 2 3 -# 4 5 6 -# 7 8 9 -# LOOP 0 SCAN -# SOURCE MUTE -# -# CH+ -# VOL- ZOOM VOL+ -# CH- -# -# SNAPSHOT SCAN -# -# BW REC FW -# STOP PLAY PAUSE -# -# TV FM diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.remotemaster deleted file mode 100644 index 1b75e42..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircd.conf.remotemaster +++ /dev/null @@ -1,117 +0,0 @@ -# this config file was MANUALLY generated -# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000 -# -# contributed by Petre Rodan <rodan@subdimension.com> -# -# brand: PixelView -# model: RemoteMaster 2000 -# supported devices: ComboTV series -# receiver type: /dev/ttySx -# video card: PixelView bttv848 pll=1 type=5 -# - -begin remote - - name RemoteMaster_2000_12b - bits 20 - flags SPACE_ENC - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 10 - pre_data 0x12B - gap 189264 - - begin codes - 1 0x0000000000052D2F - 2 0x0000000000052CCF - 3 0x0000000000052CAF - 4 0x0000000000052D37 - 5 0x0000000000052CDF - 6 0x000000000005359F - 7 0x0000000000052D4F - 8 0x0000000000052D3F - 9 0x00000000000534DF - 0 0x0000000000052D57 - ENTER 0x0000000000052CD7 - +10 0x0000000000053537 - POWER 0x0000000000054D5F - MODE 0x00000000000534AF - TAB 0x0000000000053557 - ZOOM 0x000000000005355F - FREEZE 0x000000000005356F - SEEK-- 0x0000000000054DAF - PAUSE 0x0000000000052CB7 - SEEK++ 0x00000000000534B7 - SEEK- 0x0000000000052D5F - PLAY 0x0000000000052D9F - SEEK+ 0x00000000000534CF - STOP 0x0000000000054D9F - EJECT 0x0000000000054D6F - F1 0x000000000005354F - F2 0x00000000000534D7 - F3 0x00000000000534BF - F4 0x000000000005352F - CH- 0x000000000005353F - CH+ 0x00000000000535AF - VOL- 0x0000000000052D6F - VOL+ 0x0000000000052DAF - end codes - -end remote - -begin remote - - name RemoteMaster_2000_14b - bits 20 - flags SPACE_ENC - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 10 - pre_data 0x14B - gap 189264 - - begin codes - 1 0x0000000000052D2F - 2 0x0000000000052CCF - 3 0x0000000000052CAF - 4 0x0000000000052D37 - 5 0x0000000000052CDF - 6 0x000000000005359F - 7 0x0000000000052D4F - 8 0x0000000000052D3F - 9 0x00000000000534DF - 0 0x0000000000052D57 - ENTER 0x0000000000052CD7 - +10 0x0000000000053537 - POWER 0x0000000000054D5F - MODE 0x00000000000534AF - TAB 0x0000000000053557 - ZOOM 0x000000000005355F - FREEZE 0x000000000005356F - SEEK-- 0x0000000000054DAF - PAUSE 0x0000000000052CB7 - SEEK++ 0x00000000000534B7 - SEEK- 0x0000000000052D5F - PLAY 0x0000000000052D9F - SEEK+ 0x00000000000534CF - STOP 0x0000000000054D9F - EJECT 0x0000000000054D6F - F1 0x000000000005354F - F2 0x00000000000534D7 - F3 0x00000000000534BF - F4 0x000000000005352F - CH- 0x000000000005353F - CH+ 0x00000000000535AF - VOL- 0x0000000000052D6F - VOL+ 0x0000000000052DAF - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.playtv_pro deleted file mode 100644 index e277fe6..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.playtv_pro +++ /dev/null @@ -1,29 +0,0 @@ -# lircmd.conf file to be used with PixeView PlayTV pro -# -# lircmd config file -# - -#PROTOCOL IntelliMouse - -ACCELERATOR 2 20 5 - -ACTIVATE * +100 - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_S * 8 - -BUTTON1_TOGGLE * tv/fm -BUTTON2_TOGGLE * scan -BUTTON3_TOGGLE * zoom - -BUTTON1_CLICK * 0 -BUTTON2_CLICK * loop -BUTTON3_CLICK * source - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.remotemaster deleted file mode 100644 index 07d2547..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircmd.conf.remotemaster +++ /dev/null @@ -1,31 +0,0 @@ -# lircmd.conf file to be used with RemoteMaster 2000 -# -# lircmd config file -# - -# ACCELERATOR start max multiplier - -#PROTOCOL IntelliMouse - -ACCELERATOR 2 20 5 - -ACTIVATE * ENTER - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_S * 8 - -BUTTON1_TOGGLE * +10 -BUTTON2_TOGGLE * FREEZE -#BUTTON3_TOGGLE * LIST - -BUTTON1_CLICK * 5 -BUTTON2_CLICK * 0 -#BUTTON3_CLICK * POWER - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircrc.playtv_pro deleted file mode 100644 index 4e495c8..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/pixelview/lircrc.playtv_pro +++ /dev/null @@ -1,134 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Artur Lipowski <alipowski@interia.pl> -# - begin - prog = irexec - button = power - config = xawtv-remote quit - flags = mode - end - begin - prog = irexec - button = source - repeat = 1 - config = xawtv-remote setinput next - end - begin - prog = irexec - button = zoom - repeat = 1 - config = xawtv-remote fullscreen - end - begin - prog = irexec - button = chan- - repeat = 1 - config = xawtv-remote setstation prev - end - begin - prog = irexec - button = chan+ - repeat = 1 - config = xawtv-remote setstation next - end - begin - prog = irxevent - button = loop - repeat = 1 - config = Key c xawtv - end - begin - prog = irxevent - button = scan - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = irxevent - button = mute - config = Key a xawtv - end - begin - prog = irxevent - button = vol+ - repeat = 1 - config = Key KP_Add xawtv - end - begin - prog = irxevent - button = vol- - repeat = 1 - config = Key KP_Subtract xawtv - end - begin - prog = irexec - button = 1 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = 2 - config = xawtv-remote setstation 1 - end - begin - prog = irexec - button = 3 - config = xawtv-remote setstation 2 - end - begin - prog = irexec - button = 4 - config = xawtv-remote setstation 3 - end - begin - prog = irexec - button = 5 - config = xawtv-remote setstation 4 - end - begin - prog = irexec - button = 6 - config = xawtv-remote setstation 5 - end - begin - prog = irexec - button = 7 - config = xawtv-remote setstation 6 - end - begin - prog = irexec - button = 8 - config = xawtv-remote setstation 7 - end - begin - prog = irexec - button = 9 - config = xawtv-remote setstation 8 - end - begin - prog = irexec - button = 0 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = function - config = xawtv-remote attr next - end - begin - prog = irexec - button = fn+ - config = xawtv-remote attr inc - end - begin - prog = irexec - button = fn- - config = xawtv-remote attr dec - end - begin - prog = irexec - button = +100 - config = xawtv-remote msg " `date +%H:%M` " - end diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/LinHES-config-SVN/templates/remotes/provideo/lircd.conf.pv951 deleted file mode 100644 index e488424..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/provideo/lircd.conf.pv951 +++ /dev/null @@ -1,67 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.1 on Wed May 24 23:10:08 2000 -# -# contributed by BartOwl <bartowl@dione.ids.pl> -# -# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/ -# model: PV951 (http://www.jsir.com/pv951.htm) -# supported devices: Remote control for this TV-capture card -# -# The manufacturer seems to be ProVideo: http://www.provideo.com.tw -# Funny: they have Linux "drivers" for this card... -# - -begin remote - - name PV951 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9067 4482 - one 597 1650 - zero 597 529 - ptrail 584 - repeat 9068 2232 - pre_data_bits 16 - pre_data 0x61D6 - gap 107983 - repeat_bit 0 - - begin codes - power 0x00000000000048B7 - air/cbl 0x000000000000D02F - pc/tv 0x0000000000008877 - source 0x000000000000F00F - mts 0x000000000000C837 - mute 0x00000000000008F7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - 0 0x00000000000000FF - +100 0x00000000000050AF - ch_rtn 0x000000000000E817 - ch+ 0x00000000000058A7 - ch- 0x0000000000007887 - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - func 0x0000000000009867 - ttx 0x000000000000B04F - pg+ 0x000000000000708F - pg- 0x000000000000B847 - cc 0x0000000000006897 - sync 0x00000000000028D7 - ch+- 0x00000000000018E7 - autoscan 0x00000000000030CF - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/receiver_usb.id b/abs/core-testing/LinHES-config-SVN/templates/remotes/receiver_usb.id deleted file mode 100644 index 71b37d1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/receiver_usb.id +++ /dev/null @@ -1,33 +0,0 @@ -0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc." -0bc7:0008|SnapStream_Firefly| "SnapStream Firefly" -10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver" -0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder" -0e9c:0000|streamzap| "Streamzap Remote" -0fe9:9010|dvico| "DVICO Remote:" -6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone " -1509:9242|mceusb| "FIC eHome Infrared Transceiver 1509/9242" -1934:0602|mceusb| "Fintek eHome Infrared Transceiver 1934/0602" -147a:e015|mceusb| "Formosa eHome Infrared Transceiver 147a/e015" -147a:e017|mceusb| "Formosa aim / Trust MCE Infrared Receiver147a/e017" -147a:e018|mceusb| "Formosa Industrial Computing 147a/e018" -107b:3009|mceusb| "Gateway eHome Infrared Transceiver 107b/3009" -195d:7002|mceusb| "Itron ione Libra Q-11 195d/7002" -043e:9803|mceusb| "LG eHome Infrared Transceiver 043e/9803" -045e:00a0|mceusb| "Microsoft MCE Infrared Transceiver 045e/00a0" -03ee:2501|mceusb| "Mitsumi 03ee/2501" -0471:060c|mceusb| "Philips Infrared Transciever - HP branded 0471/060C" -0471:060d|mceusb| "Philips SRM5100 0471/060d" -0471:0815|mceusb| "Philips eHome Infrared Transciever 0471/0815" -2304:0225|mceusb| "Pinnacle Systems, Inc. 2304/0225" -179d:0010|mceusb| "Ricavision internal Infrared Transceiver 179d/0010" -1308:c001|mceusb| "Shuttle eHome Infrared Transceiver 1308/c001" -051c:c001|mceusb| "Shuttle2 eHome Infrared Transceiver 051c/c001" -0609:031d|mceusb| "SMK/Toshiba G83C0004D410 0609/031d" -0609:0322|mceusb| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322" -0609:0334|mceusb| "SKM bundled with Hauppauge PVR-150 0609/0334" -1460:9150|mceusb| "Tatung eHome Infrared Transceiver 1460/9150" -1784:0001|mceusb| "Topseed eHome Infrared Transceiver 1784/0001" -1784:0006|mceusb| "Topseed HP eHome Infrared Transceiver 1784/0006" -1784:0007|mceusb| "Topseed HP eHome Infrared Transceiver 1784/0007" -1784:0008|mceusb| "Topseed eHome Infrared Transceiver 1784/0008" -045e:006d|mceusb-old| "USB Microsoft IR Transceiver Driver 045e/006d" diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircd.conf.BW6130 deleted file mode 100644 index 1797647..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircd.conf.BW6130 +++ /dev/null @@ -1,88 +0,0 @@ -# -# brand: Remotec -# model no. of remote control: BW 6130 Multimedia Master Receiver -# devices being controlled by this remote: -# - -begin remote - - name MEDIAMASTER - bits 32 - eps 0 - aeps 0 - - one 0 0 - zero 0 0 - pre_data_bits 32 - pre_data 0xFFA10003 - gap 131980 - post_data_bits 0 - toggle_bit 0 - - begin codes - PRE 0x23 - NEXT 0x24 - 1 0X10 - 2 0x11 - 3 0x12 - POWER 0x50 - VOL+ 0x30 - VOL- 0x31 - L 0x42 - R 0x44 - PAUSE 0x22 - PLAY 0x20 - STOP 0x21 - MUTE 0x32 - MOUSE_SLOW_N 0x95 - MOUSE_SLOW_NNE 0xd1 - MOUSE_SLOW_NE 0xcd - MOUSE_SLOW_ENE 0xc9 - MOUSE_SLOW_E 0xc5 - MOUSE_SLOW_ESE 0xe9 - MOUSE_SLOW_SE 0xed - MOUSE_SLOW_SSE 0xf1 - MOUSE_SLOW_S 0xb5 - MOUSE_SLOW_SSW 0xb1 - MOUSE_SLOW_SW 0xad - MOUSE_SLOW_WSW 0xa9 - MOUSE_SLOW_W 0x85 - MOUSE_SLOW_WNW 0x89 - MOUSE_SLOW_NW 0x8d - MOUSE_SLOW_NNW 0x91 - MOUSE_MEDIUM_N 0x96 - MOUSE_MEDIUM_NNE 0xd2 - MOUSE_MEDIUM_NE 0xce - MOUSE_MEDIUM_ENE 0xca - MOUSE_MEDIUM_E 0xc6 - MOUSE_MEDIUM_ESE 0xea - MOUSE_MEDIUM_SE 0xee - MOUSE_MEDIUM_SSE 0xf2 - MOUSE_MEDIUM_S 0xb6 - MOUSE_MEDIUM_SSW 0xb2 - MOUSE_MEDIUM_SW 0xae - MOUSE_MEDIUM_WSW 0xaa - MOUSE_MEDIUM_W 0x86 - MOUSE_MEDIUM_WNW 0x8a - MOUSE_MEDIUM_NW 0x8e - MOUSE_MEDIUM_NNW 0x92 - MOUSE_FAST_N 0x97 - MOUSE_FAST_NNE 0xd3 - MOUSE_FAST_NE 0xcf - MOUSE_FAST_ENE 0xcb - MOUSE_FAST_E 0xc7 - MOUSE_FAST_ESE 0xeb - MOUSE_FAST_SE 0xef - MOUSE_FAST_SSE 0xf3 - MOUSE_FAST_S 0xb7 - MOUSE_FAST_SSW 0xb3 - MOUSE_FAST_SW 0xaf - MOUSE_FAST_WSW 0xab - MOUSE_FAST_W 0x87 - MOUSE_FAST_WNW 0x8b - MOUSE_FAST_NW 0x8f - MOUSE_FAST_NNW 0x93 - end codes - -end remote - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircmd.conf.BW6130 deleted file mode 100644 index f056530..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/remotec/lircmd.conf.BW6130 +++ /dev/null @@ -1,291 +0,0 @@ -# -# lircmd config file -# simply copied/edited x10/mouseremote lircmd file -# - -PROTOCOL IntelliMouse -#PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -TOGGLE_ACTIVATE MEDIAMASTER 3 - -ACCELERATOR 1 3 2 - - -MOVE_N MEDIAMASTER MOUSE_SLOW_N -MOVE_N MEDIAMASTER MOUSE_SLOW_N - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N - -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N - -MOVE_N MEDIAMASTER MOUSE_SLOW_NNE -MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE - -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE - -MOVE_NE MEDIAMASTER MOUSE_SLOW_NE -MOVE_NE MEDIAMASTER MOUSE_SLOW_NE - -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE - -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE - -MOVE_E MEDIAMASTER MOUSE_SLOW_ENE -MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE - -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE - -MOVE_E MEDIAMASTER MOUSE_SLOW_E -MOVE_E MEDIAMASTER MOUSE_SLOW_E - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E - -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E - -MOVE_E MEDIAMASTER MOUSE_SLOW_ESE -MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE - -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE - -MOVE_SE MEDIAMASTER MOUSE_SLOW_SE -MOVE_SE MEDIAMASTER MOUSE_SLOW_SE - -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE - -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE - -MOVE_S MEDIAMASTER MOUSE_SLOW_SSE -MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE - -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE - -MOVE_S MEDIAMASTER MOUSE_SLOW_S -MOVE_S MEDIAMASTER MOUSE_SLOW_S - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S - -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S - -MOVE_S MEDIAMASTER MOUSE_SLOW_SSW -MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW - -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW - -MOVE_SW MEDIAMASTER MOUSE_SLOW_SW -MOVE_SW MEDIAMASTER MOUSE_SLOW_SW - -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW - -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW - -MOVE_W MEDIAMASTER MOUSE_SLOW_WSW -MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW - -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW - -MOVE_W MEDIAMASTER MOUSE_SLOW_W -MOVE_W MEDIAMASTER MOUSE_SLOW_W - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W - -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W - -MOVE_W MEDIAMASTER MOUSE_SLOW_WNW -MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW - -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW - -MOVE_NW MEDIAMASTER MOUSE_SLOW_NW -MOVE_NW MEDIAMASTER MOUSE_SLOW_NW - -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW - -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW - -MOVE_N MEDIAMASTER MOUSE_SLOW_NNW -MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW - -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW - -BUTTON1_CLICK MEDIAMASTER L -BUTTON3_CLICK MEDIAMASTER R - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/LinHES-config-SVN/templates/remotes/sasem/lircd.conf.sasem deleted file mode 100644 index da0fb82..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/sasem/lircd.conf.sasem +++ /dev/null @@ -1,81 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 -# -# contributed by Oliver Stabel (oliver.stabel@gmx.de) -# -# brand: Sasem OnAir -# model no. of remote control: n/a -# devices being controlled by this remote: -# This IR came with the Dign HV5 HTPC case, manufactured -# by Uneed in Korea (www.iuneed.com). -# AFAIK the case is called Ahanix HV5 in the US. -# The IR/VFD device is originally manufactured by Sasem, -# and sold as OnAir Remocon-V (?looks different from -# mine but should be the same?) -# - -begin remote - - name lirc_sasem - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0x0C807F - post_data_bits 24 - post_data 0x000000 - gap 196000 - toggle_bit 0 - - - begin codes - 1 0x08F7 - 2 0x09F6 - 3 0x0AF5 - 4 0x10EF - 5 0x11EE - 6 0x12ED - 7 0x18E7 - 8 0x19E6 - 9 0x1AE5 - start 0x40BF - 0 0x41BE - full_down 0x06F9 - vol- 0x0FF0 - vol+ 0x0EF1 - esc 0x05FA - up 0x0BF4 - close 0x07F8 - left 0x03FC - enter 0x13EC - right 0x1BE4 - prev 0x0CF3 - down 0x43BC - next 0x01FE - mute 0x0DF2 - step 0x04FB - play_pause 0x49B6 - stop 0x48B7 - winamp 0x1EE1 - media_player 0x15EA - hdtv 0x17E8 - cd_player 0x16E9 - win_dvd 0x44BB - power_dvd 0x14EB - internet 0x46B9 - email 0x47B8 - a 0x45BA - b 0x1DE2 - c 0x1CE3 - d 0x1FE0 - eject 0x02FD - power 0x00FF - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/LinHES-config-SVN/templates/remotes/sigma_designs/lircd.conf.realmagic deleted file mode 100644 index 8aa4ef5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/sigma_designs/lircd.conf.realmagic +++ /dev/null @@ -1,83 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 -# -# contributed by Stefan Neuwirth & Andreas Lange <langsmethanromp@gmx.de> -# -# brand: Sigma Designs -# model: REALmagic remote control -# www.realmagic.com/support.htm#remote -# supported devices: -# "For Hollywood Plus Version 1.4 or above Driver only" -# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card -# receiver is connected to the serial port - it does not require the card -# -# The first byte always is 131. The second and third byte are equal. (CB) -# - -begin remote - - name REALmagic - bits 20 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 10 - pre_data 0x183 - gap 189974 - toggle_bit 0 - - - begin codes - 1 0x0000000000062D8B - 2 0x0000000000012C4B - 3 0x000000000001AC6B - 4 0x0000000000072DCB - 5 0x000000000000AC2B - 6 0x0000000000052D4B - -# Nicolas Vignal reported that this code is sent for his remote -# version (1.5). It should be no problem to just have two entries for -# "6" unless you want to send codes what won't work for this receiver -# anyway. - - 6 0x0000000000041505 - - 7 0x0000000000058561 - 8 0x0000000000044511 - 9 0x000000000004AD2B - 0 0x000000000004C531 - VOL+ 0x0000000000022C8B - VOL- 0x0000000000032CCB - MUTE 0x000000000006ADAB - L-R 0x0000000000052549 - VGA 0x0000000000054551 - ENTER 0x0000000000042509 - QUIT 0x0000000000058D63 - PRG 0x0000000000038CE3 - UP 0x0000000000078DE3 - DOWN 0x0000000000064D93 - LEFT 0x0000000000044D13 - RIGHT 0x000000000003ECFB - SELECT 0x0000000000024C93 - MENU 0x0000000000014C53 - TITLE 0x0000000000054D53 - OSD 0x0000000000034CD3 - LANG 0x0000000000074DD3 - ANGLE 0x000000000000CC33 - SUB 0x000000000004CD33 - PAUSE 0x000000000002CCB3 - STOP 0x000000000006CDB3 - PLAY 0x000000000001CC73 - EJECT 0x000000000005CD73 - REV 0x000000000003CCF3 - FF 0x000000000007CDF3 - PREV 0x0000000000002C0B - NEXT 0x0000000000042D0B - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircd.conf.silitek deleted file mode 100644 index 090afb9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircd.conf.silitek +++ /dev/null @@ -1,97 +0,0 @@ -# -# -# contributed by Krister Wicksell <krister.wicksell@spray.se> -# -# brand: Silitek -# model: SM-1000 -# supported devices: -# - -begin remote - - name SILITEK_SM-1000 - bits 24 - repeat_bit 0 - - begin codes - MOUSE_E 0x0000000000aa0001 - MOUSE_NEE 0x0000000000aa0102 - MOUSE_NE 0x0000000000aa0103 - MOUSE_NNE 0x0000000000aa0104 - MOUSE_N 0x0000000000aa0105 - MOUSE_NNW 0x0000000000aa1104 - MOUSE_NW 0x0000000000aa1103 - MOUSE_NWW 0x0000000000aa1102 - MOUSE_W 0x0000000000aa1001 - MOUSE_SWW 0x0000000000aa1002 - MOUSE_SW 0x0000000000aa1003 - MOUSE_SSW 0x0000000000aa1004 - MOUSE_S 0x0000000000aa0005 - MOUSE_SSE 0x0000000000aa0004 - MOUSE_SE 0x0000000000aa0003 - MOUSE_SEE 0x0000000000aa0002 - MOUSE_R_BUTTON 0x0000000000aaa0bb - MOUSE_L_BUTTON 0x0000000000aa0abb - MOUSE_L+R_BUTTON 0x0000000000aaaabb - - 0 0x0000000000bb4a75 - 1 0x0000000000bbc1fe - 2 0x0000000000bbc2fd - 3 0x0000000000bb437c - 4 0x0000000000bbc4fb - 5 0x0000000000bb457a - 6 0x0000000000bb4679 - 7 0x0000000000bbc7f8 - 8 0x0000000000bbc8f7 - 9 0x0000000000bb4976 - * 0x0000000000bbcbf4 - # 0x0000000000bb4c73 - REW 0x0000000000bb516e - FWD 0x0000000000bbd0ef - PAUSE 0x0000000000bbcef1 - PLAY 0x0000000000bbcdf2 - STOP 0x0000000000bb4f70 - VOLUME_UP 0x0000000000bbd3ec - VOLUME_DOWN 0x0000000000bb546b - MUTE 0x0000000000bb526d - DISPLAY 0x0000000000bbd5ea - CD 0x0000000000bbdae5 - SHOW_WIZ 0x0000000000bb5b64 - PG_UP 0x0000000000bbd6e9 - PG_DN 0x0000000000bb5768 - BACK 0x0000000000bb5867 - FORWARD 0x0000000000bbd9e6 - WWW 0x0000000000bbdce3 - CLOSE 0x0000000000bb5d62 - - 0_UP 0x0000000000cc4a75 - 1_UP 0x0000000000ccc1fe - 2_UP 0x0000000000ccc2fd - 3_UP 0x0000000000cc437c - 4_UP 0x0000000000ccc4fb - 5_UP 0x0000000000cc457a - 6_UP 0x0000000000cc4679 - 7_UP 0x0000000000ccc7f8 - 8_UP 0x0000000000ccc8f7 - 9_UP 0x0000000000cc4976 - *_UP 0x0000000000cccbf4 - #_UP 0x0000000000cc4c73 - REW_UP 0x0000000000cc516e - FWD_UP 0x0000000000ccd0ef - PAUSE_UP 0x0000000000cccef1 - PLAY_UP 0x0000000000cccdf2 - STOP_UP 0x0000000000cc4f70 - VOLUME_UP_UP 0x0000000000ccd3ec - VOLUME_DOWN_UP 0x0000000000cc546b - MUTE_UP 0x0000000000cc526d - DISPLAY_UP 0x0000000000ccd5ea - CD_UP 0x0000000000ccdae5 - SHOW_WIZ_UP 0x0000000000cc5b64 - PG_UP_UP 0x0000000000ccd6e9 - PG_DN_UP 0x0000000000cc5768 - BACK_UP 0x0000000000cc5867 - FORWARD_UP 0x0000000000ccd9e6 - WWW_UP 0x0000000000ccdce3 - CLOSE_UP 0x0000000000cc5d62 - end codes -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircmd.conf.silitek deleted file mode 100644 index fc93f79..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/silitek/lircmd.conf.silitek +++ /dev/null @@ -1,72 +0,0 @@ -# -# lircmd config file for the Silitek control -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 4 2 - -#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ - -MOVE_N SILITEK_SM-1000 MOUSE_N -MOVE_N SILITEK_SM-1000 MOUSE_N - -MOVE_N SILITEK_SM-1000 MOUSE_NNE -MOVE_NE SILITEK_SM-1000 MOUSE_NNE - -MOVE_NE SILITEK_SM-1000 MOUSE_NE -MOVE_NE SILITEK_SM-1000 MOUSE_NE - -MOVE_E SILITEK_SM-1000 MOUSE_NEE -MOVE_NE SILITEK_SM-1000 MOUSE_NEE - -MOVE_E SILITEK_SM-1000 MOUSE_E -MOVE_E SILITEK_SM-1000 MOUSE_E - -MOVE_E SILITEK_SM-1000 MOUSE_SEE -MOVE_SE SILITEK_SM-1000 MOUSE_SEE - -MOVE_SE SILITEK_SM-1000 MOUSE_SE -MOVE_SE SILITEK_SM-1000 MOUSE_SE - -MOVE_S SILITEK_SM-1000 MOUSE_SSE -MOVE_SE SILITEK_SM-1000 MOUSE_SSE - -MOVE_S SILITEK_SM-1000 MOUSE_S -MOVE_S SILITEK_SM-1000 MOUSE_S - -MOVE_S SILITEK_SM-1000 MOUSE_SSW -MOVE_SW SILITEK_SM-1000 MOUSE_SSW - -MOVE_SW SILITEK_SM-1000 MOUSE_SW -MOVE_SW SILITEK_SM-1000 MOUSE_SW - -MOVE_W SILITEK_SM-1000 MOUSE_SWW -MOVE_SW SILITEK_SM-1000 MOUSE_SWW - -MOVE_W SILITEK_SM-1000 MOUSE_W -MOVE_W SILITEK_SM-1000 MOUSE_W - -MOVE_W SILITEK_SM-1000 MOUSE_NWW -MOVE_NW SILITEK_SM-1000 MOUSE_NWW - -MOVE_NW SILITEK_SM-1000 MOUSE_NW -MOVE_NW SILITEK_SM-1000 MOUSE_NW - -MOVE_N SILITEK_SM-1000 MOUSE_NNW -MOVE_NW SILITEK_SM-1000 MOUSE_NNW - -MOVE_IN SILITEK_SM-1000 PG_UP -MOVE_OUT SILITEK_SM-1000 PG_DN - -BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY -#BUTTON2_TOGGLE SILITEK_SM-1000 5 -#BUTTON3_TOGGLE SILITEK_SM-1000 6 - -BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON -BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON -BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircd.snapstrm.conf deleted file mode 100644 index 288bb51..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircd.snapstrm.conf +++ /dev/null @@ -1,127 +0,0 @@ -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005 -# -# contributed by -# -# brand: Snapstream Firefly Remote -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - -name Snapstream_Firefly -bits 40 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -gap 219964 -toggle_bit 0 - - -begin codes -MAXI 0x0000001481AC0000 -MAXI 0x00000014012C0000 -CLOSE 0x00000014D7020000 -CLOSE 0x0000001457820000 -1 0x00000014628D0000 -1 0x00000014E20D0000 -2 0x00000014E30E0000 -2 0x00000014638E0000 -3 0x00000014648F0000 -3 0x00000014E40F0000 -4 0x00000014E5100000 -4 0x0000001465900000 -5 0x0000001466910000 -5 0x00000014E6110000 -6 0x00000014E7120000 -6 0x0000001467920000 -7 0x0000001468930000 -7 0x00000014E8130000 -8 0x00000014E9140000 -8 0x0000001469940000 -9 0x000000146A950000 -9 0x00000014EA150000 -0 0x00000014EC170000 -0 0x000000146C970000 -BACK 0x000000146B960000 -BACK 0x00000014EB160000 -ENT 0x00000014ED180000 -ENT 0x000000146D980000 -VOL+ 0x000000145E890000 -VOL+ 0x00000014DE090000 -VOL- 0x000000145D880000 -VOL- 0x00000014DD080000 -MUTE 0x000000145F8A0000 -MUTE 0x00000014DF0A0000 -FIREFLY 0x0000001455800000 -FIREFLY 0x00000014D5000000 -CH+ 0x00000014608B0000 -CH+ 0x00000014E00B0000 -CH- 0x00000014618C0000 -CH- 0x00000014E10C0000 -INFO 0x0000001483AE0000 -INFO 0x00000014032E0000 -OPTION 0x0000001484AF0000 -OPTION 0x00000014042F0000 -UP 0x000000146F9A0000 -UP 0x00000014EF1A0000 -LEFT 0x00000014729D0000 -LEFT 0x00000014F21D0000 -DOWN 0x0000001477A20000 -DOWN 0x00000014F7220000 -RIGHT 0x00000014749F0000 -RIGHT 0x00000014F41F0000 -OK 0x00000014739E0000 -OK 0x00000014F31E0000 -MENU 0x00000014719C0000 -MENU 0x00000014F11C0000 -EXIT 0x0000001475A00000 -EXIT 0x00000014F5200000 -REC 0x00000014FC270000 -REC 0x000000147CA70000 -PLAY 0x00000014FA250000 -PLAY 0x000000147AA50000 -STOP 0x00000014FD280000 -STOP 0x000000147DA80000 -REW 0x00000014F9240000 -REW 0x0000001479A40000 -FWD 0x00000014FB260000 -FWD 0x000000147BA60000 -PREV 0x00000014002B0000 -PREV 0x0000001480AB0000 -PAUSE 0x00000014FE290000 -PAUSE 0x000000147EA90000 -NEXT 0x00000014FF2A0000 -NEXT 0x000000147FAA0000 -MUSIC 0x00000014DB060000 -MUSIC 0x000000145B860000 -PHOTOS 0x00000014DA050000 -PHOTOS 0x000000145A850000 -DVD 0x00000014D9040000 -DVD 0x0000001459840000 -TV 0x00000014D8030000 -TV 0x0000001458830000 -VIDEO 0x00000014DC070000 -VIDEO 0x000000145C870000 -HELP 0x00000014D6010000 -HELP 0x0000001456810000 -MOUSE 0x00000014022D0000 -MOUSE 0x0000001482AD0000 -A 0x00000014EE190000 -A 0x000000146E990000 -B 0x00000014F01B0000 -B 0x00000014709B0000 -C 0x00000014F6210000 -C 0x0000001476A10000 -D 0x00000014F8230000 -D 0x0000001478A30000 - -end codes - -end remote
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt deleted file mode 100644 index e918011..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt +++ /dev/null @@ -1,590 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the new grey Hauppauge remote -# -# Modified from Jarod Wilson's which came from Jeff Campbell's -# By Brad Templeton - - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive - -begin -prog = mythtv -button = TV -repeat = 3 -config = F5 -end - -begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 -end - -# Not yet defined -begin -prog = mythtv -button = Music -repeat = 3 -config = Up -end - -# Given another function for now, I don't use mythgallery -begin -prog = mythtv -button = Pictures -repeat = 3 -config = F -end - -begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 -end - -# I stuck the "todo" list on here as Myth has no radio function -begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left -end - -begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right -end - -# Channel Up -begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = I -end - -# Escape/Exit/Back -begin -prog = mythtv -button = BACK -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -config = Esc -end - - -# Pause -begin -prog = mythtv -button = Pause -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -repeat = 3 -config = | -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Next -repeat = 3 -config = End -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Previous -repeat = 3 -config = Home -end - -# Record -begin -prog = mythtv -button = Record -repeat = 3 -config = R -end - -# Delete -begin -prog = mythtv -button = Red -repeat = 3 -config = D -end - -# Decrease play speed -begin -prog = mythtv -button = Green -repeat = 3 -config = J -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu -repeat = 3 -config = M -end - -# Scroll up -begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 -end - -# Scroll down -begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 -end - -# Bring up OSD info -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W -end - -# double speed watch -begin -prog = mythtv -button = Yellow -repeat = 3 -config = J -end - -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch -begin -prog = mythtv -button = Blue -repeat = 3 -config = Y -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/preview.jpg Binary files differdeleted file mode 100644 index a1fbc6e..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/snapstream_firefly/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircrc b/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircrc deleted file mode 100755 index 5e668b5..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/streamzap/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/LinHES-config-SVN/templates/remotes/technisat/lircd.conf.mediafocusI deleted file mode 100644 index 6dd84f9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/technisat/lircd.conf.mediafocusI +++ /dev/null @@ -1,42 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000 -# -# contributed by Peter Schlaf -# -# brand: Technisat -# model: -# supported devices: MediaFocus PC card -# - -begin remote - - name TECHNISAT - bits 10 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 150 - - one 141 7590 - zero 141 5090 - ptrail 141 - pre_data_bits 1 - pre_data 0x1 - gap 121440 - repeat_bit 0 - toggle_bit 2 - - frequency 38000 - duty_cycle 33 - - begin codes - MUTE 0x0000000000000046 - VOL+ 0x000000000000006E - VOL- 0x000000000000006F - CH+ 0x0000000000000047 - CH- 0x0000000000000048 - end codes - -end remote - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircd.conf.m230 deleted file mode 100644 index 9562f60..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircd.conf.m230 +++ /dev/null @@ -1,48 +0,0 @@ -# -# This is for the remote that Tekram bundles with its M230 card (Mach64) -# Commands from the remote are hardware-decoded -# -# contributed by Froenchenko Leonid <lfroen@galileo.co.il> -# -# brand: Tekram M230 (ATI Mach64) -# supported devices: This remote control comes with TV Tuner cards from -# Tekram based on ATI 264VT (btt829) -# - -begin remote - name M230 - bits 8 - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - RECALL 0x0A - ENTER 0x17 - POWER 0x1C - SOURCE 0x15 - PC_VID 0x12 - STILL 0x11 - TTX 0x0F - FAV 0x13 - MUTE 0x10 - VOL_UP 0x1A - VOL_DN 0x1E - CH_UP 0x1B - CH_DN 0x1F - PLAY 0x0D - STOP 0x0E - REW 0x1D - FFW 0x19 - ADD_ER 0x16 - FUNC 0x14 - F_PLUS 0x18 - F_MINUS 0x0C - end codes -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircmd.conf.m230 deleted file mode 100644 index 0bacf5d..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/tekram/lircmd.conf.m230 +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file for Tekram remote control -# Contributed by Froenchenko Leonid <lfroen@galileo.co.il> -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -#ACCELERATOR 2 30 5 - -ACTIVATE * MOUSE_MODE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_UP -MOVE_OUT * VOL_DN - -BUTTON1_CLICK * RECALL -BUTTON2_CLICK * 0 -BUTTON3_CLICK * ENTER - -BUTTON1_TOGGLE * PLAY -BUTTON2_TOGGLE * STOP -BUTTON3_TOGGLE * REW diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/unknown/preview.jpg b/abs/core-testing/LinHES-config-SVN/templates/remotes/unknown/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/unknown/preview.jpg +++ /dev/null diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mouseremote deleted file mode 100644 index 73df340..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mouseremote +++ /dev/null @@ -1,116 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# modified by Brian Craft -# -# brand: X10 -# model: MP3 MouseRemote, Model mk19a -# - -begin remote - - name mouseremote - bits 16 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x08 - post_data_bits 8 - post_data 0x7f - min_repeat 2 - gap 140000 - - begin codes - POWER 0x000000000000000F - PC 0x000000000000002B - LAST 0x000000000000004F - CHANUP 0x0000000000000002 - CHANDOWN 0x0000000000000003 - VOLUP 0x0000000000000006 - VOLDOWN 0x0000000000000007 - MUTE 0x0000000000000005 - 1 0x0000000000000041 - 2 0x0000000000000042 - 3 0x0000000000000043 - 4 0x0000000000000044 - 5 0x0000000000000045 - 6 0x0000000000000046 - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x0000000000000040 - ENTER 0x000000000000004a - ADOTB 0x000000000000005D - REWIND 0x000000000000001C - PLAY 0x000000000000000D - FFWD 0x000000000000001D - STOP 0x000000000000000E - PAUSE 0x000000000000004E - RECORD 0x00000000000000FF - ENTER 0x000000000000004A - LAST 0x000000000000004F - DISP 0x000000000000005C - SHIFT 0x000000000000006B - GUIDE 0x000000000000006D - SELECT 0x0000000000000093 - PHONE 0x000000000000004B - WEB 0x000000000000008B - CD 0x00000000000000AB - DVD 0x00000000000000CB - MOUSE_SLOW_N 0x0000000000000110 - MOUSE_SLOW_NNE 0x0000000000000131 - MOUSE_SLOW_NE 0x0000000000000111 - MOUSE_SLOW_ENE 0x0000000000000113 - MOUSE_SLOW_E 0x0000000000000101 - MOUSE_SLOW_ESE 0x0000000000000193 - MOUSE_SLOW_SE 0x0000000000000191 - MOUSE_SLOW_SSE 0x00000000000001B1 - MOUSE_SLOW_S 0x0000000000000190 - MOUSE_SLOW_SSW 0x00000000000001B9 - MOUSE_SLOW_SW 0x0000000000000199 - MOUSE_SLOW_WSW 0x000000000000019B - MOUSE_SLOW_W 0x0000000000000109 - MOUSE_SLOW_WNW 0x000000000000011B - MOUSE_SLOW_NW 0x0000000000000119 - MOUSE_SLOW_NNW 0x0000000000000139 - MOUSE_MEDIUM_N 0x0000000000000310 - MOUSE_MEDIUM_NNE 0x0000000000000331 - MOUSE_MEDIUM_NE 0x0000000000000311 - MOUSE_MEDIUM_ENE 0x0000000000000313 - MOUSE_MEDIUM_E 0x0000000000000301 - MOUSE_MEDIUM_ESE 0x0000000000000393 - MOUSE_MEDIUM_SE 0x0000000000000391 - MOUSE_MEDIUM_SSE 0x00000000000003B1 - MOUSE_MEDIUM_S 0x0000000000000390 - MOUSE_MEDIUM_SSW 0x00000000000003B9 - MOUSE_MEDIUM_SW 0x0000000000000399 - MOUSE_MEDIUM_WSW 0x000000000000039B - MOUSE_MEDIUM_W 0x0000000000000309 - MOUSE_MEDIUM_WNW 0x000000000000031B - MOUSE_MEDIUM_NW 0x0000000000000319 - MOUSE_MEDIUM_NNW 0x0000000000000339 - MOUSE_FAST_N 0x0000000000000510 - MOUSE_FAST_NNE 0x0000000000000531 - MOUSE_FAST_NE 0x0000000000000511 - MOUSE_FAST_ENE 0x0000000000000513 - MOUSE_FAST_E 0x0000000000000501 - MOUSE_FAST_ESE 0x0000000000000593 - MOUSE_FAST_SE 0x0000000000000591 - MOUSE_FAST_SSE 0x00000000000005B1 - MOUSE_FAST_S 0x0000000000000590 - MOUSE_FAST_SSW 0x00000000000005B9 - MOUSE_FAST_SW 0x0000000000000599 - MOUSE_FAST_WSW 0x000000000000059B - MOUSE_FAST_W 0x0000000000000509 - MOUSE_FAST_WNW 0x000000000000051B - MOUSE_FAST_NW 0x0000000000000519 - MOUSE_FAST_NNW 0x0000000000000539 - BUTTONR_DOWN 0x0000000000000801 - BUTTONL_DOWN 0x0000000000000804 - BUTTON_UP 0x0000000000000800 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mp3anywhere deleted file mode 100644 index c9bb727..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircd.conf.mp3anywhere +++ /dev/null @@ -1,64 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# -# brand: X10 -# model: MP3 Anywhere Remote, Model UR81A -# supported devices: at least FireCracker Receiver Model MR26A, maybe more -# - -begin remote - - name mp3anywhere - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0xD5AAEE - min_repeat 2 - gap 140000 - - begin codes - POWER 0x00000000000000F0 - PC 0x00000000000000D4 - LAST 0x00000000000000F2 - CHANUP 0x0000000000000040 - CHANDOWN 0x00000000000000C0 - VOLUP 0x0000000000000060 - VOLDOWN 0x00000000000000E0 - MUTE 0x00000000000000A0 - ONE 0x0000000000000082 - TWO 0x0000000000000042 - THREE 0x00000000000000C2 - FOUR 0x0000000000000022 - FIVE 0x00000000000000A2 - SIX 0x0000000000000062 - SEVEN 0x00000000000000E2 - EIGHT 0x0000000000000012 - NINE 0x0000000000000092 - ZERO 0x0000000000000002 - ENTER 0x0000000000000052 - ADOTB 0x00000000000000BA - A 0x000000000000003A - B 0x00000000000000D8 - C 0x00000000000000D6 - D 0x00000000000000D4 - MENU 0x00000000000000B6 - EXIT 0x00000000000000C9 - UP 0x00000000000000D5 - DOWN 0x00000000000000D3 - LEFT 0x00000000000000D2 - RIGHT 0x00000000000000D1 - OK 0x0000000000000052 - REWIND 0x0000000000000038 - PLAY 0x00000000000000B0 - FFWD 0x00000000000000B8 - RECORD 0x00000000000000FF - STOP 0x0000000000000070 - PAUSE 0x0000000000000072 - end codes - -end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircmd.conf.mouseremote deleted file mode 100644 index c3c23b1..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/remotes/x10/lircmd.conf.mouseremote +++ /dev/null @@ -1,288 +0,0 @@ -# -# lircmd config file for the mouseremote control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - -MOVE_N mouseremote MOUSE_SLOW_N -MOVE_N mouseremote MOUSE_SLOW_N - -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N - -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N - -MOVE_N mouseremote MOUSE_SLOW_NNE -MOVE_NE mouseremote MOUSE_SLOW_NNE - -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE - -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE - -MOVE_NE mouseremote MOUSE_SLOW_NE -MOVE_NE mouseremote MOUSE_SLOW_NE - -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE - -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE - -MOVE_E mouseremote MOUSE_SLOW_ENE -MOVE_NE mouseremote MOUSE_SLOW_ENE - -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE - -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE - -MOVE_E mouseremote MOUSE_SLOW_E -MOVE_E mouseremote MOUSE_SLOW_E - -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E - -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E - -MOVE_E mouseremote MOUSE_SLOW_ESE -MOVE_SE mouseremote MOUSE_SLOW_ESE - -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE - -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE - -MOVE_SE mouseremote MOUSE_SLOW_SE -MOVE_SE mouseremote MOUSE_SLOW_SE - -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE - -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE - -MOVE_S mouseremote MOUSE_SLOW_SSE -MOVE_SE mouseremote MOUSE_SLOW_SSE - -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE - -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE - -MOVE_S mouseremote MOUSE_SLOW_S -MOVE_S mouseremote MOUSE_SLOW_S - -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S - -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S - -MOVE_S mouseremote MOUSE_SLOW_SSW -MOVE_SW mouseremote MOUSE_SLOW_SSW - -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW - -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW - -MOVE_SW mouseremote MOUSE_SLOW_SW -MOVE_SW mouseremote MOUSE_SLOW_SW - -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW - -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW - -MOVE_W mouseremote MOUSE_SLOW_WSW -MOVE_SW mouseremote MOUSE_SLOW_WSW - -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW - -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW - -MOVE_W mouseremote MOUSE_SLOW_W -MOVE_W mouseremote MOUSE_SLOW_W - -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W - -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W - -MOVE_W mouseremote MOUSE_SLOW_WNW -MOVE_NW mouseremote MOUSE_SLOW_WNW - -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW - -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW - -MOVE_NW mouseremote MOUSE_SLOW_NW -MOVE_NW mouseremote MOUSE_SLOW_NW - -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW - -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW - -MOVE_N mouseremote MOUSE_SLOW_NNW -MOVE_NW mouseremote MOUSE_SLOW_NNW - -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW - -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW - -BUTTON1_DOWN mouseremote BUTTONL_DOWN -BUTTON2_DOWN mouseremote BUTTONR_DOWN - -BUTTON1_UP mouseremote BUTTON_UP -BUTTON2_UP mouseremote BUTTON_UP diff --git a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.home b/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.home deleted file mode 100755 index c0f3136..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.home +++ /dev/null @@ -1,10 +0,0 @@ -[home] - path = /home/mythtv/ - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.media b/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.media deleted file mode 100755 index 914a321..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.media +++ /dev/null @@ -1,10 +0,0 @@ -[myth] - path = /myth - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.template b/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.template deleted file mode 100644 index 42ddb99..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/samba/smb.conf.template +++ /dev/null @@ -1,125 +0,0 @@ -# -#======================= Global Settings ===================================== -[global] - - workgroup = home_lan - server string = MythVantage - -# Security mode. Defines in which mode Samba will operate. Possible -# values are share, user, server, domain and ads. Most people will want -# user level security. See the Samba-HOWTO-Collection for details. - security = share - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page -; hosts allow = 192.168.1. 192.168.2. 127. - - load printers = no - -# you may wish to override the location of the printcap file -; printcap name = /etc/printcap - -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 50 - -# Use password server option only with security = server -# The argument list may include: -# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] -# or to auto-locate the domain controller/s -# password server = * -; password server = <NT-Server-Name> - -# Use the realm option only with security = ads -# Specifies the Active Directory realm the host is part of -; realm = MY_REALM - -# Backend to store user information in. New installations should -# use either tdbsam or ldapsam. smbpasswd is available for backwards -# compatibility. tdbsam requires no further configuration. -; passdb backend = tdbsam - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting. -# Note: Consider carefully the location in the configuration file of -# this line. The included file is read at that point. -; include = /usr/local/samba/lib/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. -; interfaces = 192.168.12.2/24 192.168.13.2/24 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply -; local master = no - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable -; os level = 33 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job -; domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election -; preferred master = yes - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The default is NO. - dns proxy = no - -# These scripts are used on a domain controller or stand-alone -# machine to add or delete corresponding unix accounts -; add user script = /usr/sbin/useradd %u -; add group script = /usr/sbin/groupadd %g -; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u -; delete user script = /usr/sbin/userdel %u -; delete user from group script = /usr/sbin/deluser %u %g -; delete group script = /usr/sbin/groupdel %g - - -#============================ Share Definitions ============================== - - diff --git a/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/keybindings.txt b/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/settings.txt b/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/settings.txt deleted file mode 100644 index 8c3a391..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/settings/default_1/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat <num> <sign> REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat <num> <name> REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme MythVantage-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style Windows REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoDefaultPlayer Internal REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME -HaltCommand sudo /sbin/poweroff REPLACEME -RebootCommand sudo /sbin/reboot REPLACEME diff --git a/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/keybindings.txt b/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/settings.txt b/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/settings.txt deleted file mode 100644 index 106be04..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/settings/default_2/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat <num> <sign> REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HaltCommand halt REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat <num> <name> REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme STB-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseDHCP 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME diff --git a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core b/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core deleted file mode 100644 index f9f6c97..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core diff --git a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core-testing b/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core-testing deleted file mode 100644 index 1fce6ea..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-core-testing +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core-testing diff --git a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra b/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra deleted file mode 100644 index e13640f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra diff --git a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra-testing b/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra-testing deleted file mode 100644 index c176add..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/sources/mv-extra-testing +++ /dev/null @@ -1,2 +0,0 @@ -##Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra-testing diff --git a/abs/core-testing/LinHES-config-SVN/templates/sources/svc_pkg b/abs/core-testing/LinHES-config-SVN/templates/sources/svc_pkg deleted file mode 100644 index c1efdcc..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/sources/svc_pkg +++ /dev/null @@ -1,3 +0,0 @@ -[svc_pkg] -Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/LinHES-config-SVN/templates/transmit/Time_Warner_SA3250/lircd.conf deleted file mode 100755 index 51db997..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/transmit/Time_Warner_SA3250/lircd.conf +++ /dev/null @@ -1,413 +0,0 @@ -# - -begin remote - - name Time_Warner_SA3250 - flags CONST_LENGTH|RAW_CODES - eps 30 - aeps 100 - - ptrail 0 - repeat 0 0 - gap 100240 - frequency 57600 - - begin raw_codes - - name MUTE - 972 802 971 802 1887 778 - 971 798 971 798 972 798 - 971 798 972 798 971 1677 - 972 802 1887 1656 992 - - name POWER - 3450 3229 894 2468 891 2468 - 893 778 892 2468 891 2469 - 917 2444 891 2468 892 2469 - 891 779 892 778 918 752 - 917 754 917 752 892 2471 - 889 779 892 779 892 777 - 892 779 892 777 868 2492 - 892 2469 891 2470 890 - - name GUIDE - 3397 3285 890 2470 840 2519 - 916 755 891 2470 839 2520 - 891 780 891 2474 860 2495 - 892 778 917 754 890 780 - 891 781 864 804 917 2443 - 865 805 891 779 866 2495 - 864 805 892 779 891 2469 - 865 2495 891 2469 866 - - - name INFO - 3449 3231 918 2441 920 2440 - 920 750 947 2414 920 2440 - 920 750 894 777 919 750 - 947 2413 921 750 919 750 - 920 751 919 752 918 2441 - 921 749 895 776 919 2441 - 920 2440 920 2441 920 749 - 921 2439 921 2440 921 - - name UP - 3396 3285 915 2444 919 2442 - 918 752 916 2444 919 2441 - 919 751 916 2445 919 751 - 890 780 916 753 917 754 - 942 729 889 780 916 2445 - 919 751 915 756 914 2448 - 916 752 916 2444 918 2442 - 919 2441 918 2443 918 - - name DOWN - 3421 3261 890 2470 918 2442 - 919 751 916 2446 917 2441 - 919 2442 918 2442 918 752 - 916 2444 919 751 890 780 - 916 755 915 755 915 2445 - 919 753 914 755 889 781 - 889 781 916 2444 919 752 - 889 2471 919 2441 918 - - name LEFT - 3427 3255 918 2441 924 2437 - 920 750 918 2442 920 2441 - 919 2440 921 2439 921 750 - 919 751 944 726 919 752 - 917 753 918 751 944 2417 - 920 750 893 777 919 751 - 919 752 918 2441 921 2440 - 920 2440 920 2440 921 - - name RIGHT - 3424 3258 892 2466 921 2439 - 896 774 920 2441 920 2440 - 920 750 920 751 945 2414 - 921 750 919 751 920 750 - 919 752 919 751 919 2440 - 921 750 918 752 918 2442 - 920 2440 921 749 918 2443 - 920 2440 920 2441 919 - - name SELECT - 3424 3257 944 2416 919 2442 - 919 750 918 2442 920 2441 - 919 751 943 727 918 2442 - 920 2440 920 752 916 752 - 969 702 917 753 892 2468 - 919 751 892 778 918 2442 - 924 2436 921 750 917 753 - 918 2443 919 2441 919 - - name SETTINGS - 3402 3278 871 2491 921 2438 - 921 749 922 2440 919 2441 - 919 2440 921 749 921 750 - 895 2465 920 2440 921 2440 - 920 749 896 775 921 2439 - 920 749 923 748 895 775 - 922 2439 920 2440 920 749 - 897 774 896 774 921 - - name EXIT - 3400 3279 896 2464 921 2439 - 921 750 895 2465 921 2439 - 921 749 898 772 896 2465 - 920 2440 920 750 920 2441 - 920 749 896 774 870 2491 - 921 749 921 749 895 2465 - 921 2440 920 749 922 748 - 897 2464 920 750 896 - - name PGUP - 3425 3255 920 2440 920 2440 - 921 749 895 2466 920 2440 - 920 749 920 2441 896 2464 - 921 749 919 2445 917 2440 - 920 750 920 750 920 2441 - 921 748 921 749 920 2440 - 921 750 919 752 919 2440 - 921 749 921 750 919 - - name PGDN - 3400 3281 921 2438 921 2441 - 920 749 895 2465 896 2465 - 920 2440 920 2440 920 2440 - 921 749 896 2465 895 2465 - 920 750 895 775 920 2440 - 921 749 921 750 895 775 - 896 774 896 774 921 2439 - 921 749 921 751 894 - - name VOLUP - 995 778 1886 779 994 775 - 995 777 993 774 996 774 - 995 775 995 1654 1885 778 - 995 775 995 774 995 - - name VOLDN - 996 778 971 802 1862 803 - 970 799 996 774 995 774 - 996 774 995 1654 1886 778 - 996 773 971 1678 991 - - name CHUP - 3421 3259 916 2444 918 2443 - 918 751 917 2444 919 2441 - 919 2441 919 751 916 2444 - 919 2441 919 2443 918 751 - 941 729 916 755 917 2442 - 919 752 916 754 891 778 - 918 2444 918 751 916 754 - 917 753 916 2445 919 - - name CHDN - 3421 3260 915 2445 918 2442 - 919 751 891 2469 919 2441 - 927 745 915 2444 919 2441 - 919 2441 919 2442 918 752 - 915 755 890 780 917 2443 - 919 752 916 754 915 2445 - 919 751 915 755 890 781 - 914 756 916 2445 917 - - name A - 3425 3258 916 2442 920 2441 - 919 751 918 2442 919 2441 - 920 2440 920 2441 919 2441 - 919 2441 920 750 917 2443 - 920 751 917 752 919 2442 - 920 750 918 753 917 753 - 917 753 942 728 917 753 - 918 2442 920 750 942 - - name B - 3398 3283 916 2443 892 2470 - 892 778 892 2468 891 2475 - 886 779 916 754 892 777 - 892 778 919 2442 891 2468 - 918 753 892 778 891 2469 - 892 778 892 778 918 2443 - 891 2469 892 2467 893 2469 - 891 778 918 753 892 - - name C - 3396 3283 891 2469 892 2468 - 892 778 917 2444 892 2468 - 892 2469 891 778 892 779 - 893 777 892 2468 892 2468 - 918 752 893 777 892 2469 - 892 778 892 778 867 802 - 918 2444 917 2442 868 2492 - 893 778 892 779 916 - - name 1 - 3424 3257 890 2470 865 2495 - 891 780 892 2468 865 2495 - 892 777 891 780 892 779 - 890 780 916 2444 865 805 - 891 779 917 753 916 2445 - 865 805 916 754 892 2469 - 865 2494 916 2445 865 2495 - 891 779 917 2443 866 - - name 2 - 3422 3258 916 2444 865 2496 - 889 782 915 2444 865 2495 - 917 2444 839 830 891 780 - 915 755 890 2470 864 806 - 917 753 891 780 866 2495 - 864 805 891 779 892 779 - 865 2494 865 2496 891 2469 - 865 805 891 2469 865 - - name 3 - 3397 3284 916 2443 892 2468 - 892 779 893 2467 892 2468 - 917 753 892 2469 891 778 - 893 778 891 2469 892 778 - 918 753 890 779 893 2468 - 891 779 893 778 891 2469 - 892 777 893 2468 891 2468 - 917 754 943 2417 892 - - name 4 - 3421 3261 890 2470 839 2520 - 917 753 891 2470 865 2495 - 917 2443 865 2495 890 781 - 891 778 891 2470 865 804 - 895 776 892 779 891 2468 - 866 805 917 753 943 727 - 866 805 889 2471 865 2494 - 892 780 916 2444 865 - - name 5 - 3396 3282 920 2441 892 2467 - 894 778 891 2468 892 2469 - 891 780 866 802 893 2470 - 890 779 918 2443 891 777 - 892 779 918 752 892 2468 - 892 779 918 752 918 2443 - 891 2469 891 779 891 2469 - 892 778 891 2468 893 - - name 6 - 3396 3284 918 2442 866 2494 - 892 778 917 2444 866 2494 - 917 2444 865 804 893 2468 - 890 780 916 2445 890 779 - 892 779 891 778 918 2443 - 891 778 892 779 892 779 - 891 2468 892 778 919 2444 - 889 778 893 2468 891 - - name 7 - 3398 3282 893 2467 892 2468 - 893 779 891 2469 891 2468 - 919 752 892 2467 892 2469 - 891 779 892 2468 892 777 - 893 778 918 752 892 2468 - 893 779 916 753 918 2442 - 892 779 891 778 893 2468 - 892 778 893 2467 892 - - name 8 - 3448 3232 892 2468 866 2494 - 892 779 892 2467 867 2494 - 891 2469 866 2495 891 2469 - 865 805 968 2394 864 804 - 918 753 891 779 892 2468 - 866 804 917 754 891 780 - 916 752 917 754 892 2469 - 865 804 893 2468 890 - - name 9 - 3422 3258 891 2469 839 2521 - 891 780 892 2468 824 2536 - 916 754 916 755 891 779 - 866 2494 839 2522 891 778 - 892 778 890 781 915 2448 - 837 831 891 779 890 2470 - 837 2523 942 2418 838 832 - 892 778 890 2471 839 - - name 0 - 3398 3284 891 2469 890 2469 - 893 779 891 2468 892 2468 - 892 2468 892 778 892 779 - 891 2469 892 2468 893 778 - 892 777 893 777 893 2469 - 891 778 892 779 868 802 - 917 2443 892 2469 890 779 - 891 779 892 2468 893 - - name LAST - 3422 3258 891 2471 916 2443 - 891 780 891 2469 272 3088 - 865 805 916 2445 308 3052 - 890 2469 892 779 915 756 - 889 781 889 780 890 2471 - 890 779 889 781 891 2471 - 272 1397 890 779 891 781 - 890 2469 448 2912 917 - - name FAV - 3423 3257 918 2442 944 2417 - 917 753 892 2469 890 2471 - 324 3036 890 2469 379 289 - 167 2525 891 2470 379 2981 - 890 780 378 270 242 781 - 866 806 889 2469 786 884 - 891 779 891 779 892 779 - 916 754 890 779 892 778 - 891 2470 839 - - name REW - 3420 3258 916 2445 326 3033 - 891 780 916 2443 891 2469 - 916 2445 838 831 918 754 - 890 2471 837 832 916 2444 - 838 832 891 779 916 2445 - 838 831 892 779 890 780 - 892 2469 839 2520 891 780 - 915 2444 836 836 890 - - name PLAY - 3448 3233 916 2444 891 2469 - 917 753 892 2468 918 2443 - 941 2420 891 2468 917 754 - 915 755 914 2446 918 2443 - 916 754 916 753 945 2416 - 943 727 941 729 918 752 - 917 753 919 2442 916 2444 - 915 755 943 728 916 - - name FF - 3420 3259 917 2442 946 2415 - 918 752 916 2445 918 2441 - 943 728 917 753 942 728 - 892 2470 864 806 889 2471 - 865 805 918 752 916 2443 - 944 726 892 779 891 2470 - 891 2469 915 2445 917 753 - 890 2471 222 1447 891 - - name PAUSE - 3421 3259 891 2470 787 2573 - 890 780 916 2444 840 2520 - 892 2468 864 806 917 2444 - 839 831 890 780 891 779 - 891 780 891 779 889 2471 - 839 831 916 755 915 754 - 892 2469 839 830 917 2444 - 840 2521 891 2469 840 - - name STOP - 3398 3284 889 2471 325 3036 - 891 779 890 2470 395 290 - 140 2535 889 781 890 781 - 889 2470 274 1397 891 2470 - 272 3087 917 754 890 780 - 889 2472 293 1377 890 779 - 916 2444 448 2913 916 754 - 866 2495 325 1344 891 779 - 915 - - name REC - 3421 3258 917 2444 916 2444 - 942 729 942 2420 889 2469 - 992 2367 942 730 891 2468 - 917 754 916 2443 892 2470 - 892 777 916 754 892 2467 - 943 730 916 754 891 779 - 917 2442 917 754 943 2417 - 918 753 915 754 892 - - name BYPASS - 3450 3231 891 2470 890 2470 - 917 753 916 2447 913 2445 - 273 3088 889 780 890 2470 - 891 2469 916 755 890 780 - 942 727 918 752 916 2444 - 890 782 916 754 865 805 - 891 2469 891 780 889 781 - 891 2468 259 3102 866 - - name TV/VCR - 19945 3915 612 1873 560 1926 - 560 1925 561 931 560 931 - 587 905 559 931 563 931 - 557 932 561 1925 585 908 - 583 1901 559 931 586 905 - 585 907 610 1875 561 1924 - 561 1926 559 1926 535 1951 - 559 1925 586 907 585 1899 - 560 931 1048 7898 3707 3862 - 587 1899 586 1899 586 1900 - 559 932 586 908 323 - - end raw_codes - - end remote diff --git a/abs/core-testing/LinHES-config-SVN/templates/xine.config.template b/abs/core-testing/LinHES-config-SVN/templates/xine.config.template deleted file mode 100644 index 966487f..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xine.config.template +++ /dev/null @@ -1,754 +0,0 @@ -# -# xine config file -# -.version:2 - -# Entries which are still set to their default values are commented out. -# Remove the '#' at the beginning of the line, if you want to change them. - -# Enable deinterlacing by default -# bool, default: 0 -#gui.deinterlace_by_default:0 - -# Configuration experience level -# { Beginner Advanced Expert Master of the known universe }, default: 0 -gui.experience_level:Expert - -# Enable OSD support -# bool, default: 1 -#gui.osd_enabled:1 - -# Dismiss OSD time (s) -# numeric, default: 3 -#gui.osd_timeout:3 - -# Ask user for playback with unsupported codec -# bool, default: 0 -#gui.play_anyway:0 - -# Automatically reload old playlist -# bool, default: 0 -#gui.playlist_auto_reload:0 - -# Audio visualization plugin -# { oscope fftscope fftgraph goom }, default: 0 -gui.post_audio_plugin:fftgraph - -# gui skin theme -# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4 -gui.skin:KeramicRH8 - -# Change xine's behavior for unexperienced user -# bool, default: 1 -#gui.smart_mode:1 - -# Snapshot location -# string, default: /home/jams -#gui.snapshotdir:/home/jams - -# Display splash screen -# bool, default: 1 -gui.splash:0 - -# Subtitle autoloading -# bool, default: 1 -#gui.subtitle_autoload:1 - -# Visual animation style -# { None Post Plugin Stream Animation }, default: 1 -#gui.visual_anim:Post Plugin - -# Windows stacking (more) -# bool, default: 0 -#gui.always_layer_above:0 - -# Audio mixer control method -# { Sound card Software }, default: 0 -#gui.audio_mixer_method:Sound card - -# Visiblility behavior of panel -# bool, default: 0 -#gui.auto_panel_visibility:0 - -# Visibility behavior of output window -# bool, default: 0 -#gui.auto_video_output_visibility:0 - -# Deinterlace plugin. -# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 -#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 - -# Event sender behavior -# bool, default: 1 -#gui.eventer_sticky:1 - -# Windows stacking -# bool, default: 0 -#gui.layer_above:0 - -# Use unscaled OSD -# bool, default: 1 -gui.osd_use_unscaled:0 - -# Screensaver reset interval (s) -# numeric, default: 10 -#gui.screensaver_timeout:10 - -# Menu shortcut style -# { Windows style Emacs style }, default: 0 -#gui.shortcut_style:Windows style - -# Stream information -# bool, default: 0 -#gui.sinfo_auto_update:0 - -# Skin Server Url -# string, default: http://xine.sourceforge.net/skins/skins.slx -#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx - -# Chapter hopping -# bool, default: 1 -#gui.skip_by_chapter:1 - -# New stream sizes resize output window -# bool, default: 1 -#gui.stream_resize_window:1 - -# Tips timeout (ms) -# numeric, default: 5000 -#gui.tips_timeout:5000 - -# gui tips visibility -# bool, default: 1 -#gui.tips_visible:1 - -# Name of video display -# string, default: -#gui.video_display: - -# Synchronized X protocol (debug) -# bool, default: 0 -#gui.xsynchronize:0 - -# Double size for small streams (require stream_resize_window) -# bool, default: 0 -#gui.zoom_small_stream:0 - -# Logo mrl -# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv -#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv - -# use XVidModeExtension when switching to fullscreen -# bool, default: 0 -#gui.use_xvidext:0 - -# height for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_height:-8192 - -# width for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_width:-8192 - -# x coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_x:-8192 - -# y coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_y:-8192 - -# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3) -# string, default: 0 1 -#gui.xinerama_use_screens:0 1 - -# Amplification level -# [0..200], default: 100 -#gui.amp_level:100 - -# gui panel visibility -# bool, default: 1 -gui.panel_visible:0 - -# numeric, default: 200 -gui.panel_x:21 - -# numeric, default: 100 -gui.panel_y:1050 - -gui.control_x:186 - -gui.control_y:46 - -gui.dropped_frames_warning:0 - -gui.eventer_x:1041 - -gui.eventer_y:781 - -gui.mrl_browser_x:23 - -gui.mrl_browser_y:9 - -gui.setup_x:717 - -gui.setup_y:227 - -gui.viewlog_x:200 - -gui.viewlog_y:210 - -# color specification yuv-opacity -# string, default: 8080c0-f -#gui.osdmenu.color_focused_button:8080c0-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_slider:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_slider_knob:ff8080-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_text_border:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_text_foreground:ff8080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_border:0080c0-f - -# color specification yuv-opacity -# string, default: c08080-f -#gui.osdmenu.color_label_foreground:c08080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_window:0080c0-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_slider:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_slider_knob:ffff00-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_text_border:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_text_foreground:ffff00-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_text_window:0080c0-f - -# directory a media in dvd device will be mounted -# string, default: /dvd -#gui.osdmenu.dvd_mountpoint:/dvd - -# palette (foreground-border-background) to use for subtitles and OSD -# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0 -#ui.osd.text_palette:white-black-transparent - -# audio driver to use -# { auto null alsa oss esd file none }, default: 0 -audio.driver:oss - -# a/v sync method to use by OSS -# { auto getodelay getoptr softsync probebuffer }, default: 0 -#audio.oss_sync_method:auto - -# use A/52 dynamic range compression -# bool, default: 0 -#audio.a52.dynamic_range:0 - -# downmix audio to 2 channel surround stereo -# bool, default: 0 -#audio.a52.surround_downmix:0 - -# A/52 volume -# [0..200], default: 100 -#audio.a52.level:100 - -# OSS audio device name -# { auto /dev/dsp /dev/sound/dsp }, default: 0 -#audio.device.oss_device_name:auto - -# OSS audio device number, -1 for none -# numeric, default: -1 -#audio.device.oss_device_number:-1 - -# OSS audio mixer number, -1 for none -# numeric, default: -1 -#audio.device.oss_mixer_number:-1 - -audio.device.alsa_front_device:default - -# speaker arrangement -# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1 -#audio.output.speaker_arrangement:Stereo 2.0 - -# offset for digital passthrough -# numeric, default: 0 -#audio.synchronization.passthrough_offset:0 - -# play audio even on slow/fast speeds -# bool, default: 0 -#audio.synchronization.slow_fast_audio:0 - -# method to sync audio and video -# { metronom feedback resample }, default: 0 -#audio.synchronization.av_sync_method:metronom feedback - -# always resample to this rate (0 to disable) -# numeric, default: 0 -#audio.synchronization.force_rate:0 - -# enable resampling -# { auto off on }, default: 0 -#audio.synchronization.resample_mode:auto - -# startup audio volume -# [0..100], default: 50 -#audio.volume.mixer_volume:50 - -# restore volume level at startup -# bool, default: 0 -#audio.volume.remember_volume:0 - -# video driver to use -# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0 -#video.driver:auto - -# pitch alignment workaround -# bool, default: 0 -#video.device.xv_pitch_alignment:0 - -# disable exact alpha blending of overlays -# bool, default: 0 -#video.output.disable_exact_alphablend:0 - -# disable all video scaling -# bool, default: 0 -#video.output.disable_scaling:0 - -# horizontal image position in the output window -# [0..100], default: 50 -#video.output.horizontal_position:50 - -# vertical image position in the output window -# [0..100], default: 50 -#video.output.vertical_position:50 - -# deinterlace method (deprecated) -# { none bob weave greedy onefield onefield_xv linearblend }, default: 4 -video.output.xv_deinterlace_method:linearblend - -# MPEG-4 postprocessing quality -# [0..6], default: 3 -#video.processing.ffmpeg_pp_quality:3 - -# DXR3 device number -# numeric, default: 0 -#dxr3.device_number:0 - -# swap odd and even lines -# bool, default: 0 -#dxr3.encoding.swap_fields:0 - -# add black bars to correct aspect ratio -# bool, default: 1 -#dxr3.encoding.add_bars:1 - -# use smooth play mode for mpeg encoder playback -# bool, default: 1 -#dxr3.encoding.alt_play_mode:1 - -# device used for CD audio -# string, default: /dev/cdrom -#media.audio_cd.device:/dev/cdrom - -# slow down disc drive to this speed factor -# numeric, default: 4 -#media.audio_cd.drive_slowdown:4 - -# query CDDB -# bool, default: 1 -#media.audio_cd.use_cddb:1 - -# CDDB cache directory -# string, default: /home/jams/.xine/cddbcache -#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache - -# CDDB server port -# numeric, default: 8880 -#media.audio_cd.cddb_port:8880 - -# CDDB server name -# string, default: freedb.freedb.org -#media.audio_cd.cddb_server:freedb.freedb.org - -# directory for saving streams -# string, default: -#media.capture.save_dir: - -# Number of dvb card to use. -# numeric, default: 0 -#media.dvb.adapter:0 - -# Remember last DVB channel watched -# bool, default: 1 -#media.dvb.remember_channel:1 - -# Last DVB channel viewed -# numeric, default: -1 -#media.dvb.last_channel:-1 - -# default language for DVD playback -# string, default: en -#media.dvd.language:en - -# region the DVD player claims to be in (1 to 8) -# numeric, default: 1 -#media.dvd.region:1 - -# device used for DVD playback -# string, default: /dev/dvd -#media.dvd.device:/dev/dvd - -# raw device set up for DVD access -# string, default: /dev/rdvd -#media.dvd.raw_device:/dev/rdvd - -# read-ahead caching -# bool, default: 1 -#media.dvd.readahead:1 - -# CSS decryption method -# { key disc title }, default: 0 -#media.dvd.css_decryption_method:key - -# play mode when title/chapter is given -# { entire dvd one chapter }, default: 0 -#media.dvd.play_single_chapter:entire dvd - -# unit for seeking -# { seek in program chain seek in program }, default: 0 -#media.dvd.seek_behaviour:seek in program chain - -# unit for the skip action -# { skip program skip part skip title }, default: 0 -#media.dvd.skip_behaviour:skip program - -# path to the title key cache -# string, default: /home/jams/.dvdcss/ -#media.dvd.css_cache_path:/home/jams/.dvdcss/ - -# file browsing start location -# string, default: /home/jams -#media.files.origin_path:/home/jams - -# list hidden files -# bool, default: 0 -#media.files.show_hidden_files:0 - -# network bandwidth -# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10 -#media.network.bandwidth:1.5 Mbps (T1) - -# Timeout for network stream reading (in seconds) -# numeric, default: 30 -#media.network.timeout:30 - -# Domains for which to ignore the HTTP proxy -# string, default: -#media.network.http_no_proxy: - -# HTTP proxy host -# string, default: -#media.network.http_proxy_host: - -# HTTP proxy password -# string, default: -#media.network.http_proxy_password: - -# HTTP proxy port -# numeric, default: 80 -#media.network.http_proxy_port:80 - -# HTTP proxy username -# string, default: -#media.network.http_proxy_user: - -# MMS protocol -# { auto TCP HTTP }, default: 0 -#media.network.mms_protocol:auto - -# automatically advance VCD track/entry -# bool, default: 1 -#media.vcd.autoadvance:1 - -# VCD default type to use on autoplay -# { MPEG track entry segment playback-control item }, default: 3 -#media.vcd.autoplay:playback-control item - -# CD-ROM drive used for VCD when none given -# string, default: -#media.vcd.device: - -# VCD position slider range -# { auto track entry }, default: 0 -#media.vcd.length_reporting:auto - -# show 'rejected' VCD LIDs -# bool, default: 0 -#media.vcd.show_rejected:0 - -# VCD format string for stream comment field -# string, default: %P - Track %T -#media.vcd.comment_format:%P - Track %T - -# VCD debug flag mask -# numeric, default: 0 -#media.vcd.debug:0 - -# VCD format string for display banner -# string, default: %F - %I %N%L%S, disk %c of %C - %v %A -#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A - -# v4l radio device -# string, default: /dev/v4l/radio0 -#media.video4linux.radio_device:/dev/v4l/radio0 - -# v4l video device -# string, default: /dev/v4l/video0 -#media.video4linux.video_device:/dev/v4l/video0 - -# device used for WinTV-PVR 250/350 (pvr plugin) -# string, default: /dev/video0 -#media.wintv_pvr.device:/dev/video0 - -# path to RealPlayer codecs -# string, default: /usr/lib/win32 -#decoder.external.real_codecs_path:/usr/lib/win32 - -# path to Win32 codecs -# string, default: /usr/lib/win32 -#decoder.external.win32_codecs_path:/usr/lib/win32 - -# subtitle size -# { tiny small normal large very large huge }, default: 1 -#subtitles.separate.subtitle_size:small - -# subtitle vertical offset -# numeric, default: 0 -#subtitles.separate.vertical_offset:0 - -# font for subtitles -# string, default: sans -#subtitles.separate.font:sans - -# encoding of the subtitles -# string, default: iso-8859-1 -#subtitles.separate.src_encoding:iso-8859-1 - -# use unscaled OSD if possible -# bool, default: 1 -#subtitles.separate.use_unscaled_osd:1 - -# default duration of subtitle display in seconds -# numeric, default: 4 -#subtitles.separate.timeout:4 - -# frames per second to generate -# numeric, default: 14 -#effects.goom.fps:14 - -# goom image height -# numeric, default: 240 -#effects.goom.height:240 - -# goom image width -# numeric, default: 320 -#effects.goom.width:320 - -# colorspace conversion method -# { Fast but not photorealistic Slow but looks better }, default: 0 -#effects.goom.csc_method:Fast but not photorealistic - -# number of audio buffers -# numeric, default: 230 -#engine.buffers.audio_num_buffers:230 - -# number of video buffers -# numeric, default: 500 -#engine.buffers.video_num_buffers:500 - -# default number of video frames -# numeric, default: 15 -#engine.buffers.video_num_frames:15 - -# priority for a/52 decoder -# numeric, default: 0 -#engine.decoder_priorities.a/52:0 - -# priority for bitplane decoder -# numeric, default: 0 -#engine.decoder_priorities.bitplane:0 - -# priority for dts decoder -# numeric, default: 0 -#engine.decoder_priorities.dts:0 - -# priority for dvaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.dvaudio:0 - -# priority for dxr3-mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-mpeg2:0 - -# priority for dxr3-spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-spudec:0 - -# priority for faad decoder -# numeric, default: 0 -#engine.decoder_priorities.faad:0 - -# priority for ffmpeg-wmv8 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv8:0 - -# priority for ffmpeg-wmv9 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv9:0 - -# priority for ffmpegaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegaudio:0 - -# priority for ffmpegvideo decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegvideo:0 - -# priority for gdkpixbuf decoder -# numeric, default: 0 -#engine.decoder_priorities.gdkpixbuf:0 - -# priority for gsm610 decoder -# numeric, default: 0 -#engine.decoder_priorities.gsm610:0 - -# priority for image decoder -# numeric, default: 0 -#engine.decoder_priorities.image:0 - -# priority for mad decoder -# numeric, default: 0 -#engine.decoder_priorities.mad:0 - -# priority for mpc decoder -# numeric, default: 0 -#engine.decoder_priorities.mpc:0 - -# priority for mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.mpeg2:0 - -# priority for nsf decoder -# numeric, default: 0 -#engine.decoder_priorities.nsf:0 - -# priority for pcm decoder -# numeric, default: 0 -#engine.decoder_priorities.pcm:0 - -# priority for qta decoder -# numeric, default: 0 -#engine.decoder_priorities.qta:0 - -# priority for qtv decoder -# numeric, default: 0 -#engine.decoder_priorities.qtv:0 - -# priority for real decoder -# numeric, default: 0 -#engine.decoder_priorities.real:0 - -# priority for realadec decoder -# numeric, default: 0 -#engine.decoder_priorities.realadec:0 - -# priority for rgb decoder -# numeric, default: 0 -#engine.decoder_priorities.rgb:0 - -# priority for spucc decoder -# numeric, default: 0 -#engine.decoder_priorities.spucc:0 - -# priority for spucmml decoder -# numeric, default: 0 -#engine.decoder_priorities.spucmml:0 - -# priority for spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.spudec:0 - -# priority for spudvb decoder -# numeric, default: 0 -#engine.decoder_priorities.spudvb:0 - -# priority for sputext decoder -# numeric, default: 0 -#engine.decoder_priorities.sputext:0 - -# priority for theora decoder -# numeric, default: 0 -#engine.decoder_priorities.theora:0 - -# priority for vorbis decoder -# numeric, default: 0 -#engine.decoder_priorities.vorbis:0 - -# priority for win32a decoder -# numeric, default: 0 -#engine.decoder_priorities.win32a:0 - -# priority for win32v decoder -# numeric, default: 0 -#engine.decoder_priorities.win32v:0 - -# priority for yuv decoder -# numeric, default: 0 -#engine.decoder_priorities.yuv:0 - -# media format detection strategy -# { default reverse content extension }, default: 0 -#engine.demux.strategy:default - -# memcopy method used by xine -# { probe libc kernel mmx mmxext sse }, default: 0 -engine.performance.memcpy_method:libc - -# percentage of discarded frames to tolerate -# numeric, default: 10 -#engine.performance.warn_discarded_threshold:10 - -# percentage of skipped frames to tolerate -# numeric, default: 10 -#engine.performance.warn_skipped_threshold:10 - -# allow implicit changes to the configuration (e.g. by MRL) -# bool, default: 0 -#misc.implicit_config:0 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/96xx_supported.txt b/abs/core-testing/LinHES-config-SVN/templates/xorg/96xx_supported.txt deleted file mode 100644 index dd4833a..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/96xx_supported.txt +++ /dev/null @@ -1,175 +0,0 @@ - NVIDIA GPU product Device PCI ID - - GeForce 6800 Ultra 0x0040 - GeForce 6800 0x0041 - GeForce 6800 XE 0x0043 - GeForce 6800 XT 0x0044 - GeForce 6800 GT 0x0045 - GeForce 6800 GT 0x0046 - GeForce 6800 GS 0x0047 - GeForce 6800 XT 0x0048 - Quadro FX 4000 0x004E - GeForce 7800 GTX 0x0090 - GeForce 7800 GTX 0x0091 - GeForce 7800 GT 0x0092 - GeForce 7800 GS 0x0093 - GeForce Go 7800 0x0098 - GeForce Go 7800 GTX 0x0099 - Quadro FX 4500 0x009D - GeForce 6800 GS 0x00C0 - GeForce 6800 0x00C1 - GeForce 6800 LE 0x00C2 - GeForce 6800 XT 0x00C3 - GeForce Go 6800 0x00C8 - GeForce Go 6800 Ultra 0x00C9 - Quadro FX Go1400 0x00CC - Quadro FX 3450/4000 SDI 0x00CD - Quadro FX 1400 0x00CE - GeForce 6800/GeForce 6800 Ultra 0x00F0 - GeForce 6600/GeForce 6600 GT 0x00F1 - GeForce 6600 0x00F2 - GeForce 6200 0x00F3 - GeForce 6600 LE 0x00F4 - GeForce 7800 GS 0x00F5 - GeForce 6800 GS 0x00F6 - Quadro FX 3400/4400 0x00F8 - GeForce 6800 Ultra 0x00F9 - GeForce PCX 5750 0x00FA - GeForce PCX 5900 0x00FB - Quadro FX 330/GeForce PCX 5300 0x00FC - Quadro NVS 280 PCI-E/Quadro FX 330 0x00FD - Quadro FX 1300 0x00FE - GeForce PCX 4300 0x00FF - GeForce2 MX/MX 400 0x0110 - GeForce2 MX 100/200 0x0111 - GeForce2 Go 0x0112 - Quadro2 MXR/EX/Go 0x0113 - GeForce 6600 GT 0x0140 - GeForce 6600 0x0141 - GeForce 6600 LE 0x0142 - GeForce 6600 VE 0x0143 - GeForce Go 6600 0x0144 - GeForce 6610 XL 0x0145 - GeForce Go 6600 TE/6200 TE 0x0146 - GeForce Go 6600 0x0148 - GeForce Go 6600 GT 0x0149 - Quadro NVS 440 0x014A - Quadro FX 550 0x014C - Quadro FX 540 0x014E - GeForce 6200 0x014F - GeForce 6500 0x0160 - GeForce 6200 TurboCache(TM) 0x0161 - GeForce Go 6200 0x0164 - Quadro NVS 285 0x0165 - GeForce Go 6400 0x0166 - GeForce Go 6200 0x0167 - GeForce Go 6400 0x0168 - GeForce4 MX 460 0x0170 - GeForce4 MX 440 0x0171 - GeForce4 MX 420 0x0172 - GeForce4 MX 440-SE 0x0173 - GeForce4 440 Go 0x0174 - GeForce4 420 Go 0x0175 - GeForce4 420 Go 32M 0x0176 - GeForce4 460 Go 0x0177 - Quadro4 550 XGL 0x0178 - GeForce4 440 Go 64M 0x0179 - Quadro NVS 0x017A - Quadro4 500 GoGL 0x017C - GeForce4 410 Go 16M 0x017D - GeForce4 MX 440 with AGP8X 0x0181 - GeForce4 MX 440SE with AGP8X 0x0182 - GeForce4 MX 420 with AGP8X 0x0183 - GeForce4 MX 4000 0x0185 - Quadro4 580 XGL 0x0188 - Quadro NVS with AGP8X 0x018A - Quadro4 380 XGL 0x018B - Quadro NVS 50 PCI 0x018C - GeForce2 Integrated GPU 0x01A0 - GeForce 7300 LE 0x01D1 - Quadro NVS 110M 0x01D7 - GeForce Go 7300 0x01D7 - GeForce Go 7400 0x01D8 - Quadro NVS 110M 0x01DA - Quadro NVS 120M 0x01DB - Quadro FX 350M 0x01DC - Quadro FX 350 0x01DE - GeForce 7300 GS 0x01DF - GeForce4 MX Integrated GPU 0x01F0 - GeForce3 0x0200 - GeForce3 Ti 200 0x0201 - GeForce3 Ti 500 0x0202 - Quadro DCC 0x0203 - GeForce 6800 0x0211 - GeForce 6800 LE 0x0212 - GeForce 6800 GT 0x0215 - GeForce 6800 XT 0x0218 - GeForce 6150 0x0240 - GeForce 6150 LE 0x0241 - GeForce 6100 0x0242 - GeForce4 Ti 4600 0x0250 - GeForce4 Ti 4400 0x0251 - GeForce4 Ti 4200 0x0253 - Quadro4 900 XGL 0x0258 - Quadro4 750 XGL 0x0259 - Quadro4 700 XGL 0x025B - GeForce4 Ti 4800 0x0280 - GeForce4 Ti 4200 with AGP8X 0x0281 - GeForce4 Ti 4800 SE 0x0282 - GeForce4 4200 Go 0x0286 - Quadro4 980 XGL 0x0288 - Quadro4 780 XGL 0x0289 - Quadro4 700 GoGL 0x028C - GeForce 7900 GTX 0x0290 - GeForce 7900 GT 0x0291 - GeForce Go 7900 GS 0x0298 - GeForce Go 7900 GTX 0x0299 - Quadro FX 2500M 0x029A - Quadro FX 1500M 0x029B - Quadro FX 5500 0x029C - Quadro FX 3500 0x029D - Quadro FX 1500 0x029E - Quadro FX 4500 X2 0x029F - GeForce 7600 GS 0x02E1 - GeForce FX 5800 Ultra 0x0301 - GeForce FX 5800 0x0302 - Quadro FX 2000 0x0308 - Quadro FX 1000 0x0309 - GeForce FX 5600 Ultra 0x0311 - GeForce FX 5600 0x0312 - GeForce FX 5600XT 0x0314 - GeForce FX Go5600 0x031A - GeForce FX Go5650 0x031B - Quadro FX Go700 0x031C - GeForce FX 5200 0x0320 - GeForce FX 5200 Ultra 0x0321 - GeForce FX 5200 0x0322 - GeForce FX 5200LE 0x0323 - GeForce FX Go5200 0x0324 - GeForce FX Go5250 0x0325 - GeForce FX 5500 0x0326 - GeForce FX 5100 0x0327 - GeForce FX Go5200 32M/64M 0x0328 - Quadro NVS 280 PCI 0x032A - Quadro FX 500/600 PCI 0x032B - GeForce FX Go53xx 0x032C - GeForce FX Go5100 0x032D - GeForce FX 5900 Ultra 0x0330 - GeForce FX 5900 0x0331 - GeForce FX 5900XT 0x0332 - GeForce FX 5950 Ultra 0x0333 - GeForce FX 5900ZT 0x0334 - Quadro FX 3000 0x0338 - Quadro FX 700 0x033F - GeForce FX 5700 Ultra 0x0341 - GeForce FX 5700 0x0342 - GeForce FX 5700LE 0x0343 - GeForce FX 5700VE 0x0344 - GeForce FX Go5700 0x0347 - GeForce FX Go5700 0x0348 - Quadro FX Go1000 0x034C - Quadro FX 1100 0x034E - GeForce 7600 GT 0x0391 - GeForce 7600 GS 0x0392 - GeForce Go 7600 0x0398 - Quadro FX 560 0x039E
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.ATSC b/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.ATSC deleted file mode 100644 index b2cd709..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.ATSC +++ /dev/null @@ -1,33 +0,0 @@ -ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750 - -ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525 - -ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync - -ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace - -ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace - -Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace - -Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace - -Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace - -Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace - -Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 - -Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace - -Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - -Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.DVD b/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.DVD deleted file mode 100644 index 9e846d0..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.DVD +++ /dev/null @@ -1,9 +0,0 @@ -#DVD-NativeModes -ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525 diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.NTSC b/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.NTSC deleted file mode 100644 index 5536c1b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.NTSC +++ /dev/null @@ -1,10 +0,0 @@ -#Analog-RegularModes -ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace -ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525 -ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace -ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525 -ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace -ModeLine "Broadcast-59.94p" 483 484 492 525 -ModeLine "VHS-59.94i" 483 484 492 525 Interlace -ModeLine "VHS-59.94p" 483 484 492 525 - diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.VESA b/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.VESA deleted file mode 100644 index a026f64..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.VESA +++ /dev/null @@ -1,163 +0,0 @@ -# 640x350 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync - -# 640x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync - -# 720x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync - -# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz -ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync - -# 640x480 @ 72Hz (VESA) hsync: 37.9kHz -ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync - -# 640x480 @ 75Hz (VESA) hsync: 37.5kHz -ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync - -# 640x480 @ 85Hz (VESA) hsync: 43.3kHz -ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync - -# 800x600 @ 56Hz (VESA) hsync: 35.2kHz -ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync - -# 800x600 @ 60Hz (VESA) hsync: 37.9kHz -ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync - -# 800x600 @ 72Hz (VESA) hsync: 48.1kHz -ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync - -# 800x600 @ 75Hz (VESA) hsync: 46.9kHz -ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync - -# 800x600 @ 85Hz (VESA) hsync: 53.7kHz -ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync - -# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz -ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace - -# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz -ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync - -# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz -ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync - -# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz -ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync - -# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz -ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync - -# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz -ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync - -# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz -ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync - -# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz -ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync - -# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz -ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz -ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz -ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync - -# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz -ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync -# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz -ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz -ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz -ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz -ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz -ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync - -# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz -ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync - -# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz -ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync - -# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync - -# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz -ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync - -# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync - -# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz -ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync - -# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz -ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync - -# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz -ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync - -# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz -ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync - -# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz -ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync - -# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz -ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync - -# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz -ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync - -# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz -ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync - -# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz -ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync - -# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz -ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync - -# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz -ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync - -# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz -ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync - -# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz -ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync - -# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz -ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync - -# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz -ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync - -# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz -ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync - -# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz -ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync - -# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz -ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync - -# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz -ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync - -# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz -ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync - -# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz -ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.custom b/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.custom deleted file mode 100644 index ca6d678..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/modeline.custom +++ /dev/null @@ -1 +0,0 @@ -ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.ati b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.ati deleted file mode 100644 index 8c75552..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.ati +++ /dev/null @@ -1,98 +0,0 @@ -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "aticonfig-Screen[0]" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" -# RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/TTF" - FontPath "/usr/share/fonts/Type1" -EndSection - -Section "Module" - Load "xtrap" - Load "dbe" - Load "record" - Load "extmod" - Load "dri" - Load "type1" - Load "freetype" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "kbd" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/input/mice" - Option "ZAxisMapping" "4 5 6 7" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" -EndSection - -Section "Monitor" - Identifier "aticonfig-Monitor[0]" -# HorizSync -# VertRefresh - Option "VendorName" "ATI Proprietary Driver" - Option "ModelName" "Generic Autodetecting Monitor" - Option "DPMS" "true" -EndSection - -Section "Device" - - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "ShadowFB" # [<bool>] - #Option "DefaultRefresh" # [<bool>] - #Option "ModeSetClearScreen" # [<bool>] - Identifier "Card0" - Driver "vesa" - VendorName "ATI Technologies Inc" - BoardName "RV370 5B60 [Radeon X300 (PCIE)]" - BusID "PCI:1:0:0" -EndSection - -Section "Device" - Identifier "aticonfig-Device[0]" - Driver "fglrx" -#INSERT HERE - -# Option "ForceMonitors" "tv,nocrt1,notmds1" -# Option "TVStandard" "SCART" -# Option "TVFormat" "PAL-B" -EndSection - - -Section "Screen" - Identifier "aticonfig-Screen[0]" - Device "aticonfig-Device[0]" - Monitor "aticonfig-Monitor[0]" - DefaultDepth 24 - SubSection "Display" - Viewport 0 0 - Depth 24 - Modes "640x480" - EndSubSection -EndSection - diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.intel b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.intel deleted file mode 100644 index c4a67c9..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.intel +++ /dev/null @@ -1,152 +0,0 @@ -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "Xorg Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "PS/2 Mouse" "CorePointer" -# Serial Mouse not detected -# USB Mouse not detected -EndSection - -Section "ServerFlags" - Option "AllowMouseOpenFail" "true" - -EndSection - -Section "Files" -# RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc:unscaled" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi:unscaled" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi:unscaled" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/PEX" -# Additional fonts: Locale, Gimp, TTF... - FontPath "/usr/share/fonts/cyrillic" -# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" -# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" -# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! - FontPath "/usr/share/fonts/Type1" - FontPath "/usr/share/fonts/ttf/western" - FontPath "/usr/share/fonts/ttf/decoratives" - FontPath "/usr/share/fonts/truetype" - FontPath "/usr/share/fonts/truetype/openoffice" - FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" - FontPath "/usr/share/fonts/latex-ttf-fonts" - FontPath "/usr/share/fonts/defoma/CID" - FontPath "/usr/share/fonts/defoma/TrueType" -EndSection - -Section "Module" - Load "ddc" # ddc probing of monitor - Load "dbe" - Load "dri" - Load "extmod" - Load "glx" - Load "bitmap" # bitmap-fonts - Load "type1" - Load "freetype" - Load "record" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" - Option "CoreKeyboard" - Option "XkbRules" "xorg" - Option "XkbModel" "pc105" - Option "XkbLayout" "" - Option "XkbVariant" "" -EndSection - -Section "InputDevice" - Identifier "Serial Mouse" - Driver "mouse" - Option "Protocol" "Microsoft" - Option "Device" "/dev/ttyS0" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "PS/2 Mouse" - Driver "mouse" - Option "Protocol" "auto" - Option "ZAxisMapping" "4 5" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "USB Mouse" - Driver "mouse" - Option "Device" "/dev/input/mice" - Option "SendCoreEvents" "true" - Option "Protocol" "IMPS/2" - Option "ZAxisMapping" "4 5" - Option "Buttons" "5" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Monitor" - Identifier "Monitor0" - Option "DPMS" "true" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Device" - Identifier "Card0" - Driver "intel" - VendorName "All" - BoardName "All" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 16 - SubSection "Display" - Depth 1 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 4 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 8 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 15 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 16 - Modes "800x600" - virtual 800 600 - EndSubSection - SubSection "Display" - Depth 24 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 32 - Modes "1024x768" "800x600" "640x480" - EndSubSection -EndSection - -Section "DRI" - Mode 0666 -EndSection diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.nvidia b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.nvidia deleted file mode 100755 index 6e005a2..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.nvidia +++ /dev/null @@ -1,93 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" -# RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" -# HorizSync -# VertRefresh - Option "DPMS" "false" - DisplaySize 203 153 - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -#INSERT MODELINE -EndSection - -Section "Device" - Identifier "Device0" - Driver "nvidia" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - Option "NoLogo" "1" - -#INSERT HERE - -#END OPTIONS - -# Option "ConnectedMonitor" "DFP" -# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled" -# Option "DigitalVibrance" "0" -# Option "TransparentIndex" "0" -# Option "CursorShadowAlpha" "64" -# Option "CursorShadowXOffset" "4" -# Option "UseEdidFreqs" "True" -# Option "NvAGP" "1" - - - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vesa b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vesa deleted file mode 100755 index 90b426b..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vesa +++ /dev/null @@ -1,75 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" -# RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "vesa" - VendorName "Generic Corporation" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.via b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.via deleted file mode 100644 index 96cae54..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.via +++ /dev/null @@ -1,80 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" -# RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "glx" - Load "extmod" - Load "type1" - Load "freetype" - Load "dri" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "via" - VendorName "via" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Depth 16 - Modes "800x600" - EndSubSection -EndSection - -Section "DRI" - Group "video" - Mode 0666 - EndSection diff --git a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vmware b/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vmware deleted file mode 100755 index c4db4bf..0000000 --- a/abs/core-testing/LinHES-config-SVN/templates/xorg/xorg.conf.vmware +++ /dev/null @@ -1,75 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 -Section "ServerFlags" - Option "AutoAddDevices" "False" -EndSection - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" -# RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "vmware" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - |
