diff options
Diffstat (limited to 'abs/core-testing/LinHES-config')
204 files changed, 28317 insertions, 0 deletions
diff --git a/abs/core-testing/LinHES-config/LinHES-release b/abs/core-testing/LinHES-config/LinHES-release new file mode 100644 index 0000000..a4de764 --- /dev/null +++ b/abs/core-testing/LinHES-config/LinHES-release @@ -0,0 +1 @@ +LinHES R6.00.02 diff --git a/abs/core-testing/LinHES-config/LinHES.install b/abs/core-testing/LinHES-config/LinHES.install new file mode 100644 index 0000000..a0a9d31 --- /dev/null +++ b/abs/core-testing/LinHES-config/LinHES.install @@ -0,0 +1,78 @@ +# This is a default template for a post-install scriptlet. You can +# remove any functions you don't need (and this header). + +# arg 1: the new package version +pre_install() { + rm -f /etc/issue + rm -f /etc/arch-release + +} + +# arg 1: the new package version +post_install() { + if [ ! -f /etc/blacklist.package ] + then + echo "List of packages to ignore" > /etc/blacklist.package + echo "one package per line" >> /etc/blacklist.package + fi + +LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage" +LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage" +for i in "$LINE" "$LINE1" +do + cp /etc/sudoers /etc/sudoers.bak + grep -q "$i" /etc/sudoers + if [ $? != 0 ] + then + echo "$i" >> /etc/sudoers + visudo -cf /etc/sudoers + if [ ! $? = 0 ] + then + cp /etc/sudoers.bak /etc/sudoers + echo $i + echo "Error adding files" + exit 1 + fi + fi +done + + +} + +# arg 1: the new package version +# arg 2: the old package version +pre_upgrade() { + /bin/true +} + +# arg 1: the new package version +# arg 2: the old package version +post_upgrade() { + . /etc/profile + ps -ef|grep mysqld|grep -v grep + status=$? + echo "status $status" + if [ $status = 0 ] + then + restore_default_settings.sh -c load + fi + if [ ! -f /etc/blacklist.package ] + then + echo "List of packages to ignore" > /etc/blacklist.package + echo "one package per line" >> /etc/blacklist.package + fi +} + +# arg 1: the old package version +pre_remove() { + /bin/true +} + +# arg 1: the old package version +post_remove() { + /bin/true +} + +op=$1 +shift +$op $* diff --git a/abs/core-testing/LinHES-config/MythVantage.sh b/abs/core-testing/LinHES-config/MythVantage.sh new file mode 100755 index 0000000..286c908 --- /dev/null +++ b/abs/core-testing/LinHES-config/MythVantage.sh @@ -0,0 +1,3 @@ +export MV_ROOT=/usr/MythVantage +export PATH=$PATH:$MV_ROOT/bin +export TEMPLATES=$MV_ROOT/templates diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD new file mode 100755 index 0000000..5fa4e66 --- /dev/null +++ b/abs/core-testing/LinHES-config/PKGBUILD @@ -0,0 +1,63 @@ +pkgname=LinHES-config +pkgver=1.0 +pkgrel=1 +conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) +pkgdesc="Install and configure your system" +depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan) +arch=('i686') + +source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh) + +install=LinHES.install +build() { + mkdir -p $startdir/pkg/etc + mkdir -p $startdir/pkg/usr/share/mythtv/themes/default + + MVDIR=$startdir/pkg/usr/MythVantage + mkdir $startdir/pkg/etc/profile.d + install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh + mkdir -p $MVDIR/bin + mkdir -p $MVDIR/templates + mkdir -p $MVDIR/etc + +#copy in all the installer specific stuff + rsync -r --exclude=.svn ../templates $MVDIR/ + install -m0700 myth_user_call $MVDIR/bin/myth_user_call + install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh + install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh + install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh + install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh +# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh + install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh + install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh + install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh + install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh + install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh + install -m 0755 create_master.sh $MVDIR/bin/create_master.sh + install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh + install -m 0755 timezone.bin $MVDIR/bin/timezone.bin + install -m 0755 timezip.py $MVDIR/bin/timezip.py + install -m 0755 autocard.py $MVDIR/bin/autocard.py + + mkdir -p $startdir/pkg/usr/bin + install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py + #copy in the branding stuff + install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release + install -m 0755 issue $startdir/pkg/etc/issue + +# copy over the ui files + install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/ + +#copy in the binaries + #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage + install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage + cd $MVDIR/bin + ln -s MythVantage mythvantage + ln -s MythVantage mythinstall + cd - +# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect + +# install -m 0755 startx $startdir/pkg/root/startx +# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh +} + diff --git a/abs/core-testing/LinHES-config/add_service.sh b/abs/core-testing/LinHES-config/add_service.sh new file mode 100755 index 0000000..190d604 --- /dev/null +++ b/abs/core-testing/LinHES-config/add_service.sh @@ -0,0 +1,15 @@ +#!/bin/bash +SERVICE_DIR=/var/service +SCRIPT_DIR=/etc/sv +if [ -d $SCRIPT_DIR/$1 ] +then + if [ -d $SERVICE_DIR/$1 ] + then + echo "$1 already there" + else + ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1 + echo "adding $1" + fi +else + echo "couldn't find $SCRIPT_DIR/$1" +fi diff --git a/abs/core-testing/LinHES-config/autocard.py b/abs/core-testing/LinHES-config/autocard.py new file mode 100755 index 0000000..b59b8d6 --- /dev/null +++ b/abs/core-testing/LinHES-config/autocard.py @@ -0,0 +1,302 @@ +#!/usr/bin/python +# import MySQL module +#jm +import MySQLdb +import sys +import getopt +import socket +import os +import time +import string +import glob +from string import letters +from string import digits + +def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor): + global currenthostname + print Device + print Driver, + print Cardvendor + cursor = db.cursor() + insert = "false" + if Driver == "ivtv" : + cardtype="MPEG" + defaultinput="Tuner 1" + insert="true" + if Cardvendor == "pcHDTV HD3000 HDTV": + insert="false" + cardtype ="whocares" + + #print insert + if insert == "true" : + cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname)) + +def INSERTHDR_INTOMYTH(deviceid,tuner_number): + cardtype='HDHOMERUN' + defaultinput='MPEG2TS' + global currenthostname + print deviceid + print cardtype + print defaultinput + print tuner_number + cursor = db.cursor() + #print insert + cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname)) + +def INSERTAUTOCARD(): + global cardlist + global currenthostname + # create a cursor + cursor = db.cursor() + + + for i in range( 1 , len(cardlist)): + insert = "false" +# print cardlist[i] + Device=cardlist[i][0] + Driver=cardlist[i][1] + Cardvendor=cardlist[i][2] + Businfo=cardlist[i][3] + if Driver == "ivtv" : + insert="true" + devicestatus="unused" + if Cardvendor == "pcHDTV HD3000 HDTV": + insert="false" + cardtype ="whocares" + if Driver == "hdr": + insert="true" + devicestatus="unused" + + if insert == "true" : + cursor.execute("delete from autocard where uniqid=%s;",(Businfo)) + if Driver=="hdr": + Cardvendor="HDHOMERUN Tuner 1" + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + Cardvendor="HDHOMERUN Tuner 2" + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + + else: + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + + + +def PRINTINFO(): + global cardlist + + for list in cardlist: + if list != "_placeholder_": + print list + #print "-------------" + +def GATHER_HDR(): + global cardlist + command="/usr/bin/hdhomerun_config --discover" + results=os.popen(command,'r') + line=results.readline() + if line.strip().split()[0] == "no": + print "HDHOMERUN not detected" + else: + print line + hdrdevice=line.strip().split()[2] + print hdrdevice + Driver="hdr" + Device=hdrdevice + Cardtype="HDHOMERUN" + Businfo=hdrdevice + cardprops = [Device,Driver , Cardtype , Businfo] + cardlist.append(cardprops) + + +def GATHER_v4l_CARDS(): + global cardlist + cardlist=["_placeholder_"] + # print "Looking for v4l cards" + try: + filelist = os.listdir('/dev/v4l/') + except OSError: + filelist=" " + #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0'] + #cardlist.append(fakelist) + try: + filelist = glob.glob("/dev/v4l/video?") + Driver="" + Cardtype="" + Businfo="" + numcards = 0 + for Device in filelist: + #print card + numcards = numcards+1 + cmd = 'v4l2-ctl -D -d' + Device + for line in os.popen(cmd).readlines(): + #print line + pos = string.find(line,"Driver name") + if pos >=0: + splitline= line.split(':') + Driver=splitline[1].strip() + pos = string.find(line,"Card type") + if pos >=0: + splitline= line.split(':') + Cardtype=splitline[1].strip() + + pos = string.find(line,"Bus info") + if pos >=0: + splitline= line.split(':',1) + Businfo=splitline[1].strip() + + #print Device,Driver , Cardtype , Businfo,numcards + cardprops = [Device,Driver , Cardtype , Businfo] + cardlist.append(cardprops) + except IOError: + print "no v4l cards found" + sys.exit(2) + + +def WRITEUDEV_IVTV(): + global insertmyth + cursor = db.cursor() + #add ivtv,cid lookup loop through until empty. + cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'") + cidrows = cursor.fetchall() + for row in cidrows: + cid=row[0] + cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid)) + result = cursor.fetchone() + description=result[2] + driver='DRIVERS==\"ivtv\"' + ATTRNAME='ATTR{name}=="ivtv? encoder MPG"' + KERNELS='KERNELS==\"' + KERNELS+=cid + KERNELS+="\"" + #filter out non digit or chars + keep=letters.join(digits) + description=filter(lambda c: c in keep, description) + devnode="ivtv/" + #devnode+=description + "_" + udevcid=cid.partition(":") + devnode+=udevcid[2] + devnode+="_video" + UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"' + print "Here is the udev rule" + print UDEV_RULE + filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules' + file = open(filename,'w') + file.write(UDEV_RULE) + if ( insertmyth == "true"): + devnode="/dev/"+devnode + INSERTCARD_INTOMYTH(devnode,"ivtv",description) + cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid)) +#now insert HDR + cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'") + cidrows = cursor.fetchall() + for row in cidrows: + if ( insertmyth == "true"): + deviceid=row[0] + #cardtype="HDHOMRUN" + #defaultinput="MPEG2TS" + dbox2_port=row[1] + tuner_number=dbox2_port.rpartition(' ')[2] + INSERTHDR_INTOMYTH(deviceid,tuner_number) + cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port)) + + + +def CLEARAUTOCARD(): + cursor = db.cursor() + cursor.execute("delete from autocard") + +def RELOADUDEV(): + print "relaoding udev rules" + os.system('udevcontrol reload_rules') + os.system('rmmod ivtv') + os.system('udevtrigger') + + +def usage(): + print " -h help" + print " -g gather and print out the found cards" + print " -w write out the udev rules" + print " -i insert cards into myth that are marked will-add(only used with -w)" + print " -r reload udev rules" + print " -c clear the autocard db" + +def main(argv): + global db + global cardlist + global currenthostname + currenthostname="" + writeudev="false" + global insertmyth + insertmyth ="false" + + db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg") + try: + cursor = db.cursor() + cursor.execute("describe autocard;") + except MySQLdb.Error, e: + cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));") + print "table created" + + if ( currenthostname == "" ): + currenthostname = socket.gethostname() + + + try: + opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] ) + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + usage() + sys.exit() + elif opt in ( "-g" , "--gathercards"): + GATHER_v4l_CARDS() + GATHER_HDR() + INSERTAUTOCARD() + PRINTINFO() + elif opt in ("-w", "--writeudev"): + writeudev="true" + elif opt in ("-i", "--insert"): + insertmyth="true" + elif opt in ( "-r" , "--reloadudev"): + RELOADUDEV() + elif opt in ( "-c" , "--clearautocard"): + CLEARAUTOCARD() + + + if ( writeudev == "true"): + WRITEUDEV_IVTV() + + + + + + +if __name__ == "__main__": + main(sys.argv[1:]) + + + + + +#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50)); +#Query OK, 0 rows affected (0.14 sec) + +#mysql> describe autocard; +#+--------------+-------------+------+-----+---------+-------+ +#| Field | Type | Null | Key | Default | Extra | +#+--------------+-------------+------+-----+---------+-------+ +#| dev | varchar(50) | YES | | NULL | | +#| driver | varchar(50) | YES | | NULL | | +#| description | varchar(50) | YES | | NULL | | +#| uniqid | varchar(50) | YES | | NULL | | +#| devicestatus | varchar(50) | YES | | NULL | | +#| hostname | varchar(50) | YES | | NULL | | +#+--------------+-------------+------+-----+---------+-------+ + + + + + + + + diff --git a/abs/core-testing/LinHES-config/bpopup-ui.xml b/abs/core-testing/LinHES-config/bpopup-ui.xml new file mode 100755 index 0000000..df0598b --- /dev/null +++ b/abs/core-testing/LinHES-config/bpopup-ui.xml @@ -0,0 +1,164 @@ +<!-- + + This is a myth style theme file for mythwelcome + + (c) 2005 by a whole bunch of people associated with MythTV + +--> +<mythuitheme> + + <window name="welcome_screen"> + + <!-- + + First, define all the fonts we need on this screen + + --> + <font name="title" face="Arial"> + <color>#ffff00</color> + <dropcolor>#000000</dropcolor> + <size>24</size> + <shadow>3,3</shadow> + <bold>yes</bold> + </font> + + <font name="time" face="Arial"> + <color>#9999cc</color> + <size>18</size> + <bold>yes</bold> + </font> + + <font name="label" face="Arial"> + <color>#ffff00</color> + <dropcolor>#000000</dropcolor> + <size>18</size> + <shadow>3,3</shadow> + <bold>yes</bold> + </font> + + <font name="info" face="Arial"> + <color>#ffffff</color> + <size>18</size> + <bold>yes</bold> + </font> + + <font name="biginfo" face="Arial"> + <color>#ffffff</color> + <size>50</size> + <bold>yes</bold> + </font> + <font name="warning" face="Arial"> + <color>#ff0000</color> + <dropcolor>#000000</dropcolor> + <size>16</size> + <shadow>2,2</shadow> + <bold>yes</bold> + </font> + + <font name="buttons" face="Arial"> + <color>#ffff00</color> + <size>14</size> + <bold>yes</bold> + </font> + + <container name="main_display"> + <area>0,0,800,600</area> + + <textarea name="title" draworder="0" align="center"> + <multiline>no</multiline> + <font>title</font> + <area>50,40,700,40</area> + <value></value> + </textarea> + + <!-- + time + --> + <textarea name="time_text" draworder="0" align="right"> + <multiline>no</multiline> + <font>time</font> + <area>660,520,110,30</area> + <value></value> + </textarea> + + <textarea name="date_text" draworder="0" align="center"> + <multiline>no</multiline> + <font>time</font> + <area>0,60,800,70</area> + <value></value> + </textarea> + + <!-- + current myth status + --> + + <textarea name="status_text" draworder="1" align="center"> + <multiline>yes</multiline> + <font>info</font> + <area>20,70,760,60</area> + <value>MythTV is idle and will shutdown shortly.</value> + </textarea> + + <!-- + current recordings status + --> + + <textarea name="recording_label" draworder="1" align="center"> + <font>label</font> + <area>20,110,760,30</area> + <!--<value>Percent Complete </value>--> + <value></value> + </textarea> + + <textarea name="recording_text" draworder="1" align="hcenter"> + <multiline>yes</multiline> + <font>biginfo</font> + <area>20,110,760,150</area> + <value></value> + </textarea> + + <!-- + next scheduled recording status + --> + + <textarea name="scheduled_label" draworder="1" align="center"> + <font>label</font> + <area>20,320,760,30</area> + <value></value> + </textarea> + + <textarea name="scheduled_text" draworder="1" align="hcenter"> + <multiline>yes</multiline> + <font>biginfo</font> + <area>20,400,760,120</area> + <value></value> + </textarea> + + <!-- + scheduled recordings conflict warning + --> + + <textarea name="conflicts_text" draworder="1" align="center"> + <font>warning</font> + <area>20,490,760,30</area> + <value>WARNING: There are conflicting scheduled recordings!</value> + </textarea> + + <!-- + start frontend button + + <textbutton name="startfrontend_button" draworder="1"> + <position>81,535</position> + <font>buttons</font> + <image function="on" filename="mw_text_button_on.png"></image> + <image function="off" filename="mw_text_button_off.png"></image> + <image function="pushed" filename="mw_text_button_pushed.png"></image> + </textbutton> + + --> + + </container> + + </window> + +</mythuitheme> diff --git a/abs/core-testing/LinHES-config/build_diskless.sh b/abs/core-testing/LinHES-config/build_diskless.sh new file mode 100755 index 0000000..4dfd5fc --- /dev/null +++ b/abs/core-testing/LinHES-config/build_diskless.sh @@ -0,0 +1,143 @@ +#!/bin/bash +#CD=/mnt/cd +. /etc/profile +. /etc/systemconfig + +TFTP=/data/srv/tftp +CD=/data/srv/tftp/live +DESTCD=/data/srv/tftp/CD +BASE=/data/srv/tftp/masterbuild + +MODULES=$DESTCD/MythVantage/base/ +myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` +SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/ + +function log () { +echo $1 +} + +function check_xvfb () { +export DISPLAY=127.0.0.1:25 + Xvfb -ac :25 & + +} + + +function create_base_image() { +echo $SRCFILES +if [ -f $SRCFILES/data.lzm ] +then + mkdir $HOST_IMG_DIR + cd $SRCFILES + echo "Creating image.." > $BASE/tmp/.install_state + LIST=`ls *.lzm` + for i in $LIST + do + echo $i + echo $i > $BASE/tmp/.install_percent + lzm2dir $i \/$HOST_IMG_DIR + done + + for i in sys proc dev tmp + do + mkdir /$HOST_IMG_DIR/$i + done + + chmod 777 /$HOST_IMG_DIR/tmp + mknod /$HOST_IMG_DIR/dev/null c 1 3 + mknod /$HOST_IMG_DIR/dev/null c 1 5 + mknod /$HOST_IMG_DIR/dev/console c 5 1 + chmod +s /$HOST_IMG_DIR/usr/bin/Xorg + chmod +s /$HOST_IMG_DIR/usr/bin/crontab + chmod +s /$HOST_IMG_DIR/usr/bin/sudo + chmod +s /$HOST_IMG_DIR/bin/mount + #copy fstab from masterbuild + cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab + echo "Done: installing data" > $BASE/tmp/.install_state + return 0 +else + echo "Error: no modules" > $BASE/tmp/.install_state + log "couldn't find modules to install" + return 1 +fi +} + +function configure_image () { + echo "Configuring system" > $BASE/tmp/.install_state + cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig + chown root:mythtv $HOST_IMG_DIR/etc/systemconfig + chmod 775 "$HOST_IMG_DIR" /etc/systemconfig + cp /etc/mtab $HOST_IMG_DIR/etc/mtab + mount --bind /dev $HOST_IMG_DIR/dev + + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install +#copy syssettings template to here. + SE=$BASE$TEMPLATES/settings/syssettings + mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings + cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings + chown root:mythtv $HOST_IMG_DIR/etc/systemconfig + chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings + chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings +#update remotedb with this host settings + OLDDISPLAY=$DISPLAY + check_xvfb + chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1 + chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + if [ ! $? = 0 ] + then + touch $mountpoint/tmp/.dbsysfailed + chmod 777 $mountpoint/tmp/.dbsysfailed + else + #Run second time + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + fi +chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install +cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf +echo "Done" > $BASE/tmp/.install_state +DISPLAY=$OLDDISPLAY + +#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/ +} + +function create_tftp_boot () { + + CFGFILE=$TFTP/pxelinux.cfg/01-$2 + echo "DEFAULT mythfe" > $CFGFILE + echo "LABEL mythfe" >> $CFGFILE + echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE + echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE + echo "TIMEOUT 2" >> $CFGFILE +} + +function create_nfs_export () { +echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports +exportfs -arv +} + +#-------------------------------------------------------------------------------MAIN PROGRAM --------------------------------------------------------------------- +if [ x$1 = x -o x$2 = x ] +then + echo "usage: hostname macaddress" + exit 1 +fi + +image_name=$1 +mac_address=`echo $2| tr "[:upper:]" "[:lower:]"` + +echo "using image_name of $image_name" +echo "using mac_address of $mac_address" + +HOST_IMG_DIR=$TFTP/$1 + +create_base_image $image_name +configure_image +umount $HOST_IMG_DIR/dev +create_tftp_boot $image_name $mac_address +create_nfs_export $image_name + + + + +#create_dhcp_entry $mac_address + diff --git a/abs/core-testing/LinHES-config/checkout_MythVantage.sh b/abs/core-testing/LinHES-config/checkout_MythVantage.sh new file mode 100755 index 0000000..764e418 --- /dev/null +++ b/abs/core-testing/LinHES-config/checkout_MythVantage.sh @@ -0,0 +1,47 @@ +#!/bin/bash +MYDIR=`pwd` +MYTHPATH="\/data\/LinHES-PKGBUILD\/abs\/core-testing\/mythtv\/stable\/mythtv\/src\/mythtv-0.21" + +function setup_links { +rm mythinstall.bin +rm mythbeselect.bin +ln -s $MYDIR/src/MythVantage-app/mythinstall/mythinstall ./mythinstall.bin +ln -s $MYDIR/src/MythVantage-app/mythbeselect/mythbeselect ./mythbeselect.bin +} + +function dl_repo { +mkdir src +cd src +if [ ! -d MythVantage-app ] +then + git clone http://mythvantage.com/MythVantage-app.git/ + cd MythVantage-app + git checkout --track -b LinHES origin/LinHES + cd $MYDIR + setup_links + cd - +else + echo "updating exisiting tree" + cd MythVantage-app + git pull + git checkout master + git merge + cd - +fi + +cd MythVantage-app +git checkout master +#git checkout origin/LinHES + +} + +dl_repo +sed -i "s/^MYTHPATH.*$/MYTHPATH\=\"$MYTHPATH\"/g" $MYDIR/src/MythVantage-app/mythinstall/mythinstall.pro +sed -i "s/#define __MVAPP__/\/\/#define __MVAPP__/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h +sed -i "s/mythvantage/LinHES/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h + +cd $MYDIR/src/MythVantage-app/mythinstall && qmake +make || exit 1 +cd $MYDIR/src/MythVantage-app/mythbeselect && qmake +make ||exit 1 + diff --git a/abs/core-testing/LinHES-config/create_master.sh b/abs/core-testing/LinHES-config/create_master.sh new file mode 100755 index 0000000..1e641b4 --- /dev/null +++ b/abs/core-testing/LinHES-config/create_master.sh @@ -0,0 +1,57 @@ +#!/bin/bash +#CD=/mnt/cd +CD=/data/srv/tftp/live +DESTCD=/data/srv/tftp/CD +DEST=/data/srv/tftp/masterbuild +MODULES=$DESTCD/MythVantage/base/ +myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + +mkdir -p $DESTCD +mkdir -p $DEST + +mount $CD +status=0 +if [ -f $CD/MythVantage/base/data.lzm ] +then + status=0 +else + status=1 +fi +if [ x$status = x0 ] +then + echo "copying to disk" + cp -rp $CD/* $DESTCD + cd $MODULES + for i in *.lzm + do + echo $i + lzm2dir $i \/$DEST + done + for i in sys proc dev tmp + do + mkdir $DEST/$i + done + chmod 777 /$DEST/tmp + mknod $DEST/dev/null c 1 3 + mknod $DEST/dev/null c 1 5 + mknod $DEST/dev/console c 5 1 + chmod +s $DEST/usr/bin/Xorg + chmod +s $DEST/usr/bin/crontab + chmod +s $DEST/usr/bin/sudo + chmod +s $DEST/bin/mount +fi +if [ ! -f $DEST/etc/fstab.bak ] +then + cp $DEST/etc/fstab $DEST/etc/fstab.bak +fi +tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab +echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab +echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports + + +exportfs -arv + +#copy in the modules +mkdir -p $DEST/mnt/live/mnt/ +mv $DESTCD/* $DEST/mnt/live/mnt/ + diff --git a/abs/core-testing/LinHES-config/file_time_offset.py b/abs/core-testing/LinHES-config/file_time_offset.py new file mode 100755 index 0000000..f2973d0 --- /dev/null +++ b/abs/core-testing/LinHES-config/file_time_offset.py @@ -0,0 +1,39 @@ +#!/usr/bin/python + + +import time +import os +import glob +import getopt +import sys +def main(argv): + filecount=0 +# root = "/tmp" +# offset = 4 + now = int(time.time()) + + + try: + opts, args = getopt.getopt(argv, "hs:d:") + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + print "-s seconds -d /testdir" + print "default if 4 seconds" + sys.exit() + elif opt in ( "-s" ): + offset = int(arg) + elif opt in ("-d"): + root = arg + + for item in glob.glob(root+"/*"): + lastmodDate = os.path.getmtime(item) + tdiff= now-lastmodDate + #print tdiff, offset + + if tdiff > offset: + filecount+=1 + print filecount +if __name__ == "__main__": + main(sys.argv[1:]) diff --git a/abs/core-testing/LinHES-config/install-ui.xml b/abs/core-testing/LinHES-config/install-ui.xml new file mode 100755 index 0000000..0ec9ddb --- /dev/null +++ b/abs/core-testing/LinHES-config/install-ui.xml @@ -0,0 +1,175 @@ +<!-- + + This is a myth style theme file for mythwelcome + + (c) 2005 by a whole bunch of people associated with MythTV + +--> +<mythuitheme> + + <window name="welcome_screen"> + + <!-- + + First, define all the fonts we need on this screen + + --> + <font name="title" face="Arial"> + <color>#ffff00</color> + <dropcolor>#000000</dropcolor> + <size>24</size> + <shadow>3,3</shadow> + <bold>yes</bold> + </font> + + <font name="time" face="Arial"> + <color>#9999cc</color> + <size>18</size> + <bold>yes</bold> + </font> + + <font name="label" face="Arial"> + <color>#ffff00</color> + <dropcolor>#000000</dropcolor> + <size>18</size> + <shadow>3,3</shadow> + <bold>yes</bold> + </font> + + <font name="info" face="Arial"> + <color>#ffffff</color> + <size>18</size> + <bold>yes</bold> + </font> + + <font name="biginfo" face="Arial"> + <color>#ffffff</color> + <size>50</size> + <bold>yes</bold> + </font> + <font name="warning" face="Arial"> + <color>#ff0000</color> + <dropcolor>#000000</dropcolor> + <size>16</size> + <shadow>2,2</shadow> + <bold>yes</bold> + </font> + + <font name="buttons" face="Arial"> + <color>#ffff00</color> + <size>14</size> + <bold>yes</bold> + </font> + <font name="tinyinfo" face="Arial"> + <color>#9999cc</color> + <size>12</size> + <bold>no</bold> + </font> + + <container name="main_display"> + <area>0,0,800,600</area> + + <textarea name="title" draworder="0" align="center"> + <multiline>no</multiline> + <font>title</font> + <area>50,40,700,40</area> + <value>LinHes: The Linux Home Entertainment System </value> + </textarea> + + <!-- + time + --> + <textarea name="time_text" draworder="0" align="right"> + <multiline>no</multiline> + <font>time</font> + <area>660,520,110,30</area> + <value></value> + </textarea> + + <textarea name="date_text" draworder="0" align="hcenter"> + <multiline>yes</multiline> + <font>time</font> + <area>20,75,740,100</area> + <value></value> + </textarea> + + <!-- + current myth status + --> + + <textarea name="status_text" draworder="1" align="center"> + <multiline>yes</multiline> + <font>info</font> + <area>20,100,760,60</area> + <value>MythTV is idle and will shutdown shortly.</value> + </textarea> + + <!-- + current recordings status + --> + + <textarea name="recording_label" draworder="1" align="center"> + <font>label</font> + <area>20,140,760,30</area> + <!--<value>Percent Complete </value>--> + <value></value> + </textarea> + + <textarea name="recording_text" draworder="1" align="hcenter"> + <multiline>yes</multiline> + <font>biginfo</font> + <area>20,140,760,150</area> + <value></value> + </textarea> + + <!-- + next scheduled recording status + --> + + <textarea name="scheduled_label" draworder="1" align="center"> + <font>label</font> + <area>20,320,760,30</area> + <value></value> + </textarea> + + <textarea name="scheduled_text" draworder="1" align="hcenter"> + <multiline>yes</multiline> + <font>biginfo</font> + <area>20,400,760,120</area> + <value></value> + </textarea> + + <textarea name="mythvantage_text" draworder="1" align="right"> + <multiline>no</multiline> + <font>tinyinfo</font> + <area>20,560,760,30</area> + <value></value> + </textarea> + <!-- + scheduled recordings conflict warning + --> + + <textarea name="conflicts_text" draworder="1" align="center"> + <font>warning</font> + <area>20,490,760,30</area> + <value>WARNING: There are conflicting scheduled recordings!</value> + </textarea> + + <!-- + start frontend button + + <textbutton name="startfrontend_button" draworder="1"> + <position>81,535</position> + <font>buttons</font> + <image function="on" filename="mw_text_button_on.png"></image> + <image function="off" filename="mw_text_button_off.png"></image> + <image function="pushed" filename="mw_text_button_pushed.png"></image> + </textbutton> + + --> + + </container> + + </window> + +</mythuitheme> diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh new file mode 100755 index 0000000..514dd3c --- /dev/null +++ b/abs/core-testing/LinHES-config/install_db_chroot.sh @@ -0,0 +1,52 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +#myhost=`cat /etc/hostname` +myhost=$hostname +hostname $myhost +mount -t proc none /proc +pacman --noconfirm -Sf mysql +/etc/rc.d/mysqld + +status=1 +mysqlstatus=1 +while [ ! $status = 0 ] +do + /etc/rc.d/mysqld stop + sleep 1 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + $MV_ROOT/bin/restore_default_settings.sh -c load + DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 + $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install + if [ $SystemType = "Master_backend" ] + then + $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + fi + #update database to allow user jobs on this host. + $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW + $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + #if [ -d /data/srv/mysql/mythconverg ] + if [ -d /var/lib/mysql/mythconverg ] + then + # pacman --noconfirm -R webcalendar + # pacman --noconfirm --nodeps -S webcalendar + status=0 + fi + fi + fi +done +#/etc/rc.d/mysqld stop +#umount /proc + + + diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh new file mode 100755 index 0000000..e5912da --- /dev/null +++ b/abs/core-testing/LinHES-config/install_functions.sh @@ -0,0 +1,449 @@ +#!/bin/bash +. /etc/profile +disk=$2 +mountpoint=new_boot + +#------------------------------------------- +MYTHDBUSER=mythtv +MYTHTVPASSWD=mythtv +CMDLINE=$(cat /proc/cmdline) +hostname=`hostname` +MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec" +BASE="" + +function update_db_settings () { + + $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";" +} + +function random_theme () { +THEMES="basic-blue +basic-green +basic-red +basic-purple +basic-amber" + +theme=($THEMES) # Read into array variable. + +num_themes=${#theme[*]} # Count how many elements. + +pick=${theme[$((RANDOM%num_themes))]} +echo "Selected $pick as the theme" +update_db_settings Theme "$pick" +} + + +function setupremote { + mv -f $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` 2>/dev/null + if [ -d $TEMPLATES/remotes/$Remotetype ] + then + cd $TEMPLATES/remotes/$Remotetype + for i in lircd* + do + cat $i >> $BASE/etc/lircd.conf + done + cp -f lircrc* $BASE/etc/lircrc + chmod 755 /etc/lircrc + update_db_settings HostRemoteType "$Remotetype" + /usr/sbin/lircd -d /dev/lirc0 + mkdir /root/.mythtv + ln -s /etc/lircrc /root/.mythtv/lircrc + fi +} + +function scan_for_usb_remote () { +echo "Scanning for usb receiver/remote" +while read line +do + USBID=`echo "$line"|cut -d"|" -f1` + lsusb -d "$USBID" > /dev/null 2>/dev/null + if [ $? = 0 ] + then + Remotetype=`echo "$line"|cut -d"|" -f2` + echo "found $Remotetype" + setupremote + break + fi +done <$BASE/$TEMPLATES/remotes/receiver_usb.id +} + +function rest_of_network () { + #netmask + echo $CMDLINE | grep -q netmask + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*netmask=} + NETMASK=${TEMPVAR%% *} + /sbin/ifconfig eth0 $IP netmask $NETMASK + nm=`/usr/bin/nmconv.py -obits $NETMASK` + NETMASK="/$nm $NETMASK" + echo $NETMASK + update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK" + else + echo "netmask not found" + fi + #gateway + echo $CMDLINE | grep -q gateway + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*gateway=} + GATEWAY=${TEMPVAR%% *} + /sbin/route add default gw $GATEWAY + update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY" + + else + echo "gateway not found" + fi + + #dns + echo $CMDLINE | grep -q dns + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*dns=} + DNS=${TEMPVAR%% *} + echo "nameserver $DNS" >> /etc/resolv.conf + update_db_settings HostDNS${MYTHDEFAULT} "$DNS" + else + echo "DNS not found" + fi +} + +function init_network { + echo $CMDLINE |grep -q netdev + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*netdev=} + MYTHDEFAULT=${TEMPVAR%% *} + else + MYTHDEFAULT="eth0" + fi + + + + echo $CMDLINE | grep -q ip + if [ $? = 0 ] + then + update_db_settings HostDefaulteth0 0 + update_db_settings HostDefault${MYTHDEFAULT} 1 + + update_db_settings HostActiveonbooteth0 0 + update_db_settings HostActiveonboot${MYTHDEFAULT} 1 + update_db_settings HostNetDevice ${MYTHDEFAULT} + + TEMPVAR=${CMDLINE#*ip=} + IP=${TEMPVAR%% *} + if [ x$IP = xdhcp ] + then + /sbin/dhcpcd $MYTHDEFAULT + update_db_settings HostUseDHCP${MYTHDEFAULT} 0 + else + /sbin/ifconfig ${MYTHDEFAULT} $IP + update_db_settings HostUseDHCP${MYTHDEFAULT} 1 + update_db_settings HostIP${MYTHDEFAULT} "$IP" + rest_of_network + fi + fi +} + +function init_remote { + echo $CMDLINE | grep -q remoteport + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*remoteport=} + REMOTEPORT=${TEMPVAR%% *} + if [ x"$ReceiverType" = "xSerial" ] + then + if [ -e /dev/$REMOTEPORT ] + then + /usr/bin/setserial /dev/$REMOTEPORT uart none + /sbin/modprobe lirc_serial + update_db_settings HostReceiverType Serial + update_db_settings HostSerialPortlirc "$REMOTEPORT" + fi + fi + + fi + + echo $CMDLINE | grep -q remote + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*remote=} + Remotetype=${TEMPVAR%% *} + setupremote + else + scan_for_usb_remote + fi +} + +#----------------------- + +#set -x + +partition_it () { +ROOT=$1 +DATA=$2 +SWAP=$3 + +if [ ! x$SWAP = xNO ] + then + SWAPLINE=",$SWAP,S" + MKSWAPCMD="mkswap /dev/${disk}2" + else + SWAPLINE=",0,0" + MKSWAPCMD="" + fi + +if [ x$DATA = xALL ] +then + DATALINE=",,," + EXTRALINE="" +else + DATALINE=",$DATA,," + EXTRALINE=",0,," +fi +sfdisk /dev/$disk -uM << EOF +,$1,,* +$SWAPLINE +$DATALINE +$EXTRALINE +; +EOF + +$MKSWAPCMD +#sfdisk -l /dev/$disk +} + + +function fscmd () { + +case $1 in + reiserfs) FSCMDC="mkreiserfs -q -l ROOT" + ;; + + xfs) FSCMDC="mkfs -t $1 -f" + ;; + ext3) FSCMDC="mkfs.ext3" + ;; + jfs) FSCMDC="mkfs.jfs -q " + ;; + *) FSCMDC="echo $1" + ;; + +esac +} + +format_it () { + fscmd $1 + $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n + fscmd $2 + $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n +} + +mount_it () { + if [ ! -d \/$mountpoint ] + then + mkdir \/$mountpoint + fi + mount /dev/${disk}1 \/$mountpoint + mkdir \/$mountpoint/myth + mount /dev/${disk}3 \/$mountpoint/myth +} + +unmount_it () { + umount /dev/${disk}1 + umount /dev/${disk}3 +} + + +copy_it () { + + if [ x$1 = xALL ] + then + echo "Transferring system" + unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf + else + echo "Upgrading system" + unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf + fi + + for i in sys proc dev tmp + do + mkdir /$mountpoint/$i + + done + chmod 777 /$mountpoint/tmp + mknod /$mountpoint/dev/null c 1 3 + mknod /$mountpoint/dev/null c 1 5 + mknod /$mountpoint/dev/console c 5 1 + chmod +s /$mountpoint/usr/bin/Xorg + chmod +s /$mountpoint/usr/bin/crontab + chmod +s /$mountpoint/usr/bin/sudo + chmod +s /$mountpoint/bin/mount + +} + + +device_node () { + cd /dev + mknod hda b 3 0 + mknod hda1 b 3 1 + mknod hda2 b 3 2 + mknod hda3 b 3 3 + mknod hda4 b 3 4 + mknod hda5 b 3 5 + mknod hda6 b 3 6 + mknod hda7 b 3 7 + mknod hda8 b 3 8 + mknod sda b 8 0 + mknod sda1 b 8 1 + mknod sda2 b 8 2 + mknod sda3 b 8 3 + mknod sda4 b 8 4 + mknod sda5 b 8 5 + mknod sda6 b 8 6 + mknod sda7 b 8 7 + mknod sda8 b 8 8 + mknod sdb b 8 16 + mknod sdb1 b 8 17 + mknod sdb2 b 8 18 + mknod sdb3 b 8 19 + mknod sdb4 b 8 20 + mknod sdb5 b 8 21 + mknod sdb6 b 8 22 + mknod sdb7 b 8 23 + mknod sdb8 b 8 24 + cd - + } + + +function create_fstab() +{ +echo "creating fstab" +cat > /$mountpoint/etc/fstab << EOF +# <file system> <dir> <type> <options> <dump> <pass> +none /dev/pts devpts defaults 0 0 +none /dev/shm tmpfs defaults 0 0 +/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0 +/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0 +UUID=ROOTUID / auto defaults 0 1 +UUID=DATAUID /myth auto defaults 0 1 +UUID=SWAPUID swap swap defaults 0 0 +EOF + + +} + + +function find_uuid() { + uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2` + echo $uuid for $1 + FOUNDUUID=$uuid + +} + + +case $1 in + partition_it ) + #drive ROOT DATA(ALL) SWAP(NO) + for i in `mount | grep $disk | awk ' { print $1 } '` + do + umount $i + done + swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '` + swapoff $swap + partition_it $3 $4 $5 + exit 0 + + ;; + format_it ) + device_node + + format_it $3 $4 + exit 0 + ;; + mount_it ) + mount_it + ;; + copy_it ) + copy_it $3 + + ;; + + + fstab_fix_it) + echo $@ >> /tmp/fstab.input + if [ ! -f /$mountpoint/etc/fstab ] + then + create_fstab + fi + #was 5 + if [ x$3 = xUPGRADE ] + then + if [ ! -f /tmp/etc/KnoppMyth-version ] + then + if [ -f /tmp/etc/fstab ] + then + cp -f /tmp/etc/fstab /$mountpoint/etc/fstab + else + create_fstab + fi + else + create_fstab + fi + fi + + #search for UUID + FOUNDUUID="" + find_uuid ${2}1 + ROOTUUID=$FOUNDUUID + echo "--" + echo $ROOTUUID + echo "--" + FOUNDUUID="" + find_uuid ${2}2 + SWAPUUID=$FOUNDUUID + + FOUNDUUID="" + find_uuid ${2}3 + DATAUUID=$FOUNDUUID + + + sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab + sed -i -e "s/.*\/myth\ .*$/UUID=$DATAUUID \/myth auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab + sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab + +#if Knoppmyth upgrade then loop through old fstab picking out vg + if [ -f /tmp/etc/KnoppMyth-version ] + then + if [ -f /tmp/etc/fstab ] + then + grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab + grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir + grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs chown -R mythtv:users + fi + fi + ;; + + grub_it ) + grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)" + #fixing grub/menu.1st + FOUNDUUID="" + find_uuid ${disk}1 + ROOTUUID=$FOUNDUUID + sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst + mkinitcpio -g /$mountpoint/boot/kernel26.img + ;; + umount_it) + umount \/$mountpoint/myth + umount \/$mountpoint + ;; + update_db_it ) + update_db_settings "$2" "$3" + ;; + + +esac + + + diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh new file mode 100755 index 0000000..bc89a1d --- /dev/null +++ b/abs/core-testing/LinHES-config/install_proxy.sh @@ -0,0 +1,526 @@ +#!/bin/bash +#chroot and /tmp +MVHOSTNAME=larch5 +. /etc/profile +TEMP_TEMPLATES=/tmp/templates +disk=$2 +rootfs=$3 +rootsize=$4 +datafs=$5 +datasize=$6 +swapsize=$7 +mountpoint="/new_boot" +run=$MV_ROOT/bin/install_functions.sh +. /etc/systemconfig 2>/dev/null +. $MV_ROOT/bin/networkconfig.sh +CMDLINE=$(cat /proc/cmdline) + +#TEMPNET="Hostip"$default_interface +#eval MYTHIP=\$${TEMPNET} + + +progress () { +mypercent=`echo "$1" | cut -d. -f1` +if [ x$mypercent = x ] +then +echo "" > /tmp/.install_percent +else +echo "${mypercent}% complete" > /tmp/.install_percent +fi + + +} + +function apply_new_auth () { +#check if file is present + if [ -f /root/myth_user_call.out ] + then + #read in file, running each command in chroot + exec 4</root/myth_user_call.out + while read LINE <&4 + do + if [ ! x"$LINE" = x ] + then + #run commands in chroot + chroot "$mountpoint" $MV_ROOT/bin/myth_user_call -i $LINE > /tmp/user_auth.update + fi + done + rm -f /root/myth_user_call.out + else + echo "No new password changes to apply" + fi +} + + +function backup_sql_check { + + if [ -f $mountpoint/myth/backup/mythconverg.sql.gz ] + then + return 0 + else + return 1 + fi +} + +function upgrade_mount_search { + MYTH_P=`cat /tmp/etc/fstab |grep /myth| awk ' {print $1 '} ` + umount $mountpoint/myth + mount $MYTH_P $mountpoint/myth + return 0 + +} + + +full_install () { + if [ -f /tmp/.this_is_upgrade ] + then + rm /tmp/.this_is_upgrade + fi + echo "Partitioning $disk" > /tmp/.install_state + progress 1 + sleep 1 + $run partition_it $disk $rootsize $datasize $swapsize + + echo "Formating $disk" > /tmp/.install_state + progress 2 + sleep 1 + $run format_it $disk $rootfs $datafs + + echo "Preparing $disk" > /tmp/.install_state + progress 3 + sleep 1 + $run mount_it $disk + + startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` + + echo "STARTSIZE=$startsize">/tmp/.startsize.io + echo "Installing data" > /tmp/.install_state + + sleep 1 + $run copy_it $disk ALL + rm $mountpoint/etc/fstab + $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL + + progress 99 + sleep 1 + $run grub_it $disk + + + echo "Configuring system" > /tmp/.install_state + progress 100 + sleep 1 + cp -f /etc/systemconfig "$mountpoint"/etc + #run save syssettings to save settings, then copy to new mountpoint + $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost + SE=$TEMPLATES/settings/syssettings + mkdir -p ${mountpoint}$SE + cp -rp $SE/* ${mountpoint}$SE/ + chown root:mythtv "$mountpoint"/etc/systemconfig + chown -R mythtv:mythtv ${mountpoint}$SE + + chmod -R 775 ${mountpoint}$SE + chmod 775 "$mountpoint"/etc/systemconfig + #copy over any updates that might have occured + cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + chmod -R 755 ${mountpoint}/root + cp /etc/mtab "$mountpoint"/etc/mtab + apply_new_auth + + + if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] + then + #installing DB to local machine + #turn off old live database, so the chroot one can start + /etc/rc.d/mysqld stop + mount --bind /dev "$mountpoint/dev" + chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + echo "stopping mysql in chroot" + chroot "$mountpoint" /etc/rc.d/mysqld stop + umount "$mountpoint/dev" + + #/etc/rc.d/mysqld start + else + #update remotedb with this host settings + chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + if [ ! $? = 0 ] + then + touch $mountpoint/tmp/.dbsysfailed + chmod 777 $mountpoint/tmp/.dbsysfailed + else + #Run second time + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + fi + fi + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced + touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure + + echo "Done" > /tmp/.install_state + cp /tmp/mythvantage_install.log $mountpoint/var/log/ + $run unmount_it $disk +} + +function createsquashlist(){ +if [ -f $1 ] +then + rm -f +$1 +fi +for i in bin boot etc home lib opt root sbin usr var +do +echo $i >> $1 +done + + +} + + + + +function upgrade () { + touch /tmp/.this_is_upgrade + + if [ ! x$rootfs = "xDo_not_format" ] + then + echo "Formating $disk" > /tmp/.install_state + progress 2 + sleep 1 + $run format_it $disk $rootfs NO + fi + echo "Preparing $disk" > /tmp/.install_state + progress 3 + sleep 1 + $run mount_it $disk + startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` + echo "STARTSIZE=$startsize">/tmp/.startsize.io + echo "Installing data" > /tmp/.install_state + sleep 1 + cp -rf /tmp/etc /new_boot/etc.old + cp -rf /tmp/oss /new_boot/var/lib/oss.old + + + SQUASHLIST="/tmp/.squashlist" + createsquashlist $SQUASHLIST + $run copy_it $disk $SQUASHLIST + #copy back ssh keys + + cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ + cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/ + cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/ + cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/ + + if [ ! -f /tmp/etc/KnoppMyth-version ] + then + #passwd/shadow/group + cp -fp /new_boot/etc.old/passwd /new_boot/etc/ + cp -fp /new_boot/etc.old/shadow /new_boot/etc/ + cp -fp /new_boot/etc.old/group /new_boot/etc/ + fi + + if [ x$rootfs = "xDo_not_format" ] + then + rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '` + fi + $run fstab_fix_it $disk UPGRADE + + echo "Writing boot sector" > /tmp/.install_state + progress 99 + sleep 1 + $run grub_it $disk + + echo "Configuring system" > /tmp/.install_state + progress + sleep 1 + cp /etc/mtab "$mountpoint"/etc/mtab + cp -f /etc/systemconfig "$mountpoint"/etc +#make sure mythconverg.sql.gz is present + if [ ! backup_sql_check ] + then + upgrade_mount_search + fi + + if [ -f /tmp/etc/KnoppMyth-version ] + then + #run save syssettings to save settings, then copy to new mountpoint + $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost + SE=$TEMPLATES/settings/syssettings + mkdir -p ${mountpoint}$SE + cp -rp $SE/* ${mountpoint}$SE/ + chown root:mythtv "$mountpoint"/etc/systemconfig + chown -R mythtv:mythtv ${mountpoint}$SE + chmod -R 775 ${mountpoint}$SE + touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade + fi + + cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + chmod -R 755 ${mountpoint}/root + chown root:mythtv "$mountpoint"/etc/systemconfig + chmod 775 "$mountpoint"/etc/systemconfig + #mount /proc and /dev + mount --bind /dev "$mountpoint/dev" + mount --bind /proc "$mountpoint/proc" + + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + #wrap this in a network check_network, no need to update the db if the import worked. +##### do I need to start mysql? + /etc/rc.d/mysqld stop + chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" > /tmp/chrootdb_km.out + if [ -f /tmp/etc/KnoppMyth-version ] + then + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings + else + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + fi + # + #Run second time + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install + apply_new_auth + umount "$mountpoint/dev" + umount "$mountpoint/proc" + + echo "Done" > /tmp/.install_state + cp /tmp/mythvantage_install.log $mountpoint/var/log/ + + $run unmount_it $disk + /etc/rc.d/mysqld start +} + +function netboot-full_install () { + TEMPVAR=${CMDLINE#*nfsroot=} + NFSROOT=${TEMPVAR%% *} + NFSROOT=`echo $NFSROOT|cut -d: -f1` + MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -` + URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC" + echo "calling $URL" + echo "Starting" > /tmp/.install_state + curl $URL + ${MV_ROOT}/bin/xconfig.sh +} + +function killdhcp () { +if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] + then + pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` + kill -9 $pid + rm -f /etc/dhcpc/dhcpcd-eth0.pid + rm -f /var/run/dhcpcd* + fi +if [ -f /var/run/dhcpcd-eth0.pid ] + then + pid=`cat /var/run/dhcpcd-eth0.pid` + kill -9 $pid + rm -f /var/run/dhcpcd-eth0.pid* + fi +ip address flush dev eth0 +} + + + +function SANE_SYSETTINGS () { +sed -e '/HOSTrootfstype/d' \ + -e '/HOSTrootfstype/d' \ + -e '/HOSTdatafstype/d' \ + -e '/HOSTOSsize/d' \ + -e '/HostUseALLdata/d' \ + -e '/HOSTDATAsize/d' \ + -e '/HOSTuprootfstype/d' \ + -e '/HostUseSWAP/d' \ + -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new + mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt +} + +case $1 in + full_install_it ) full_install ;; + + NETBOOT) +echo "-----------------------------------------------------------------------3-----" + netboot-full_install ;; + + find_update) + #TRY TO mount first partition of drive + #copy /etc/systemconfig to live, import settings into db + #umount drive + $run mount_it $disk + if [ -f /new_boot/etc/systemconfig ] + then + ###########ADD templates + mkdir -p $TEMP_TEMPLATES + cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES + SANE_SYSETTINGS + cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/ + cp /new_boot/etc/systemconfig /etc/systemconfig + cp -rf /new_boot/etc /tmp/etc + cp -rf /new_boot/var/lib/oss /tmp/oss + + $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 + else + cp -rf /new_boot/etc /tmp/etc + #now we search for the timezone and try to update + TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1` + TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -` + + + if [ $TZREGION = $TZSUB ] + then + $run update_db_it HostTimeZoneRegion "$TZREGION" + else + $run update_db_it HostTimeZoneRegion "$TZREGION" + $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB" + fi + + + + fi + + + + $run umount_it $disk + ;; + + upgrade_it) + #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&" + upgrade + + ;; + disk_model_it) + model="unknown" + size="xxx" + case $2 in + + h* ) + model=`cat /proc/ide/$2/model` + ;; + s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` + ;; + esac + size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` + + + echo ""$model" $size " >/tmp/model + + ;; + network_check_it) + #Should never return from check_network + case $2 in + setup_network) + vnc_check + install_network_setup + ;; + + check_self) + myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + ping -c 1 $myipdefault + if [ ! $? = 0 ] + then + exit 3 + #can't ping yourself + fi + ;; + check_gw) + #check gateway + mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'` + if [ ! x$mygwdefault = x ] + then + ping -c 1 $mygwdefault + if [ ! $? = 0 ] + then + exit 4 + fi + fi + ;; + check_ns) + #check nameserver + mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` + ping -c 1 $mydns + if [ ! $? = 0 ] + then + exit 5 + fi + ;; + check_names) + host google.com + if [ ! $? = 0 ] + then + exit 6 + fi + ;; + host_names) + #if host is found, then check to see if it's online + #if not online, assume it's ok to use this hostname + + hout=`host $hostname` + status=$? + #found host, now grab the ip + if [ $status = 0 ] + then + hoip=`echo $hout|awk '{print $4}'` + ping -c 1 $hoip + if [ $? = 0 ] + then + status=0 + else + status=1 + fi + fi + + if [ $status = 0 ] + then + exit 7 + fi + + + ;; + + esac + exit 0 + ;; + + + * ) + state=`cat /tmp/.install_state` + if [ x"${state}" = "xConfiguring system" ] + then + progress "" + else + + if [ -f /tmp/.startsize.io ] + then + . /tmp/.startsize.io + #finding the drive + ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 ` + used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "` + used=`echo $used-$STARTSIZE|bc` + #echo $used + fi + + if [ ! x$used = x ] + then + . /root/.install_size + #somehow find if it's an install or update + if [ -f /tmp/.this_is_upgrade ] + then + total=$UPGRADESIZE + else + total=$TOTALSIZE + fi + percent=`echo "scale=2 ; ($used/$total) * 100 " |bc ` + cond2=$(echo "$percent > 100" |bc ) + if [ $cond2 -eq 1 ] + then + percent=100 + fi + cond3=$(echo "$percent < 3" |bc ) + if [ $cond3 -eq 0 ] + then + progress $percent + fi + fi + fi + ;; +esac + + + diff --git a/abs/core-testing/LinHES-config/issue b/abs/core-testing/LinHES-config/issue new file mode 100644 index 0000000..3c01679 --- /dev/null +++ b/abs/core-testing/LinHES-config/issue @@ -0,0 +1 @@ +LinHes
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config/live-install.sh b/abs/core-testing/LinHES-config/live-install.sh new file mode 100755 index 0000000..573bb1f --- /dev/null +++ b/abs/core-testing/LinHES-config/live-install.sh @@ -0,0 +1,28 @@ +#!/bin/bash +#redirect stderr to stdout, then rediret stdout to file +. /etc/profile +exec 2>&1 +exec > /tmp/mythvantage_install.log +. /etc/X11/STBWINDOWMANAGER +/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 +keylaunch & +/usr/bin/tilda & +/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & +export MALLOC_CHECK_=0 +if [ -f /opt/vmware/bin32/vmware-user-wrapper ] +then + /opt/vmware/bin32/vmware-user-wrapper & +fi +xhost + +CMDLINE=$(cat /proc/cmdline) +echo $CMDLINE |grep -q nfsroot +NFSROOT=$? +if [ x$NFSROOT = x1 ] +then + + unbuffer MythVantage & +else + NETBOOT=YES MythVantage & +fi + +exec $STBWINDOWMANAGER diff --git a/abs/core-testing/LinHES-config/myth_user_call b/abs/core-testing/LinHES-config/myth_user_call new file mode 100644 index 0000000..d95e468 --- /dev/null +++ b/abs/core-testing/LinHES-config/myth_user_call @@ -0,0 +1,164 @@ +#!/bin/bash +#Wrapper script to manage USERNAME accounts + web security +# myth_USERNAME_all -c add -u USERNAME +# myth_USERNAME_all -c delete -u USERNAME +# myth_USERNAME_all -c pass -u USERNAME -p pass +# myth_USERNAME_all -c web -u USERNAME -p pass + +INIT_CHECK=TRUE +FULL_CALL="$@" +function CHROOT_CHECK { + INIT=`ps -p 1 -o comm=` + if [ x$INIT = xrunit ] + then + CHROOT_NEEDED=FALSE + else + CHROOT_NEEDED=TRUE + fi +} + +function store_commands () { + echo "$FULL_CALL" >> /root/myth_user_call.out + chmod 600 /root/myth_user_call.out +} + + +function add_user() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to add user" + store_commands + else + echo "adding user $USERNAME" + useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users + fi + +} + + +function del_user() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to delete user" + store_commands + else + echo "removing user $USERNAME" + userdel $USERNAME + fi + +} + + +function pass_change() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to change password" + store_commands + else + echo "changing password for $USERNAME" + echo $USERNAME:$PASSWORD | chpasswd + fi + +} + + +function web_security { + echo "this is just a stub" + +} + +function ARG_ERR() { + if [ x$OPTARG = "x" ] + then + echo "$SWITCH NEEDS AND ARG" + exit 11 + fi +} + + +function print_help { + + echo "Valid options are:" + echo " -c (add|delete|pass|web)" + echo " -u USERNAMEname" + echo " -p password" + exit 1 +} + +if [ $# -eq 0 ] +then + print_help +fi + +declare -r OPTSTRING="c:u:p:i" +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + + c) ARG_ERR + OPERATION=$OPTARG + ;; + u) ARG_ERR + USERNAME=$OPTARG + ;; + p) ARG_ERR + PASSWORD=$OPTARG + ;; + i) INIT_CHECK=FALSE + + esac +done + +if [ $INIT_CHECK = TRUE ] +then + CHROOT_CHECK +else + CHROOT_NEEDED=FALSE +fi + +case $OPERATION in + add) + if [ x$USERNAME = x ] + then + print_help + fi + add_user + ;; + delete) + if [ x$USERNAME = x ] + then + print_help + fi + del_user + ;; + pass) + if [ x$USERNAME = x ] + then + print_help + fi + + if [ x$PASSWORD = x ] + then + print_help + fi + pass_change + ;; + + web) + if [ x$USERNAME = x ] + then + print_help + fi + + + if [ x$PASSWORD = x ] + then + print_help + fi + echo "adding webUSERNAME $USERNAME with $PASS" + ;; + *) print_help + ;; +esac + + diff --git a/abs/core-testing/LinHES-config/networkconfig.sh b/abs/core-testing/LinHES-config/networkconfig.sh new file mode 100644 index 0000000..61a7405 --- /dev/null +++ b/abs/core-testing/LinHES-config/networkconfig.sh @@ -0,0 +1,280 @@ +#!/bin/bash +#. /etc/profile +#. /etc/systemconfig +#BASE=/tmp +ETCNETDIR=$BASE/etc/net/ifaces + + + +function kill_dhcp () +{ +for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid +do + if [ -f ${i} ] + then + pid=`cat ${i}` + kill -9 $pid + rm -f ${i} + fi + if [ x$1 = xflush ] + then + for ifdev in eth0 wlan0 eth1 wlan1 + do + echo ${i} |grep $ifdev + status=$? + if [ $status = 1 ] + then + ip address flush $ifdev + fi + done + fi + +done + +} + +function setup_nameserver(){ +grep -q $1 ${BASE}/etc/resolv.conf +status=$? +if [ ! $status = 0 ] +then + echo "nameserver $1" >> ${BASE}/etc/resolv.conf +fi + +} + +function setup_interfaces() { + local IS_WIRELESS + local ip + local netmask + local isactive + local dns + local UseDHCP + local GW + local ESSID + local KEY + local ENCRYPT + local TEMPNET + IS_WIRELESS=false + + #local ip + TEMPNET="Hostip"$1 + echo $TEMPNET + eval ip=\$${TEMPNET} + + TEMPNET=Hostnetmask$1 + eval netmask=\$${TEMPNET} + netmask=`echo "$netmask" | cut -d " " -f1` + + TEMPNET=HostActive$1 + eval isactive=\$${TEMPNET} + + TEMPNET=HostDNS$1 + eval dns=\$${TEMPNET} + + TEMPNET="HostUSEDHCP"$1 + eval UseDHCP=\$${TEMPNET} + + TEMPNET=HostGW$1 + eval GW=\$${TEMPNET} + + + + if [ $1 = wlan0 -o $1 = wlan1 ] + then + IS_WIRELESS=TRUE + TEMPNET=HostESSID$1 + eval ESSID=\$${TEMPNET} + + TEMPNET="HostKey"$1 + eval KEY=\$${TEMPNET} + + TEMPNET=HostUseEncryption$1 + eval ENCRYPT=\$${TEMPNET} + fi + + + echo "Setup $1 in progress, wireless: $IS_WIRELESS" + + if [ ! -d $ETCNETDIR/$1 ] + then + mkdir -p $ETCNETDIR/$1 + fi + + if [ ! -f $ETCNETDIR/$1/options ] + then + cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options + fi + + if [ x$isactive = x0 ] + then + echo "setting $1 to inactive" + sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options + + else + echo "setting $1 to active" + sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options + fi + + if [ x$IS_WIRELESS = xTRUE ] + then + echo "setting $1 wireless" + sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options + #set the key and essid + echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig + if [ x$ENCRYPT = x1 ] + then + echo "key $KEY" >> $ETCNETDIR/$1/iwconfig + fi + + else + echo "disabling wireless" + sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options + fi + + + + + if [ $UseDHCP = 0 ] + then + echo using dhcp + sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options + + else + echo "using static ip" + sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options + echo "default via $GW" > $ETCNETDIR/$1/ipv4route + echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address + setup_nameserver $dns + fi +} + + +function find_active () { +#HostActiveeth1="1" +rm -f ${BASE}/etc/resolv.conf +if [ x$MYTHDHCP = x1 ] + then + #add 127.0.0.1 to /etc/resolv.conf + echo "search lan" > ${BASE}/etc/resolv.conf + echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf + fi + +for i in eth0 eth1 wlan0 wlan1 +do + CURRENTIF="HostActive"$i + eval IFSTATE=\$${CURRENTIF} + if [ x$IFSTATE = x1 ] + then + setup_interfaces $i + fi +done +} + +function setup_hostname { +#set the hostname +if [ ! x$hostname = x ] +then + echo $hostname > ${BASE}/etc/hostname + cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts + #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts + + if [ x$MYTHDHCP = x1 ] + then + echo "127.0.0.1 localhost " > ${BASE}/etc/hosts + echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts + else + echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts + fi + cat /tmp/hosts >> ${BASE}/etc/hosts +fi + +kill_dhcp +} + +function vnc_check() { + CMDLINE=$(cat /proc/cmdline) + echo $CMDLINE |grep -q vnc + USEVNC=$? + echo $CMDLINE |grep -q nfsroot + NETBOOT=$? + echo $USEVNC + if [ ! x$USEVNC = x0 ] + then + echo "not using vnc" + if [ ! x$NETBOOT = x0 ] + then + echo "not using netboot" + else + echo "using netboot" + USEVNC=0 + fi + + else + echo " using vnc" + fi +} + +function setup_MYTH_vars { + TEMPMYTH="Hostip"$default_interface + #echo $TEMPMYTH + eval MYTHIP=\$${TEMPMYTH} + + TEMPMYTH="HostUSEDHCP"$default_interface + eval MYTHDHCP=\$${TEMPMYTH} + + + +} + + + +function setup_network { + setup_MYTH_vars + setup_hostname + find_active +} + +function start_network { +if [ ! $USEVNC = 0 ] +then + /etc/net/scripts/network.init restart + +else + echo "VNC/NETBOOT in use, will NOT restart network" +fi + +} + +function stop_network { +if [ ! $USEVNC = 0 ] +then + echo "stopping the network" + kill_dhcp flush + ip address flush dev eth0 2>&1 >/dev/null + ip address flush dev eth1 2>&1 >/dev/null + ip address flush dev wlan0 2>&1 >/dev/null + ip address flush dev wlan1 2>&1 >/dev/null +else + echo "VNC/NETBOOT in use, will NOT restart network" +fi + +} + + +#this is used by the install process to start the network +function install_network_setup { + setup_MYTH_vars + setup_hostname + stop_network + find_active + start_network + +} + + + + + + + diff --git a/abs/core-testing/LinHES-config/remove_service.sh b/abs/core-testing/LinHES-config/remove_service.sh new file mode 100755 index 0000000..6cc4b4f --- /dev/null +++ b/abs/core-testing/LinHES-config/remove_service.sh @@ -0,0 +1,8 @@ +#!/bin/bash +SERVICE_DIR=/var/service +SCRIPT_DIR=/etc/sv +if [ -e $SERVICE_DIR/$1 ] +then + echo "removing" + rm $SERVICE_DIR/$1 +fi diff --git a/abs/core-testing/LinHES-config/restore_default_settings.sh b/abs/core-testing/LinHES-config/restore_default_settings.sh new file mode 100755 index 0000000..5690f48 --- /dev/null +++ b/abs/core-testing/LinHES-config/restore_default_settings.sh @@ -0,0 +1,349 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +shopt -s -o nounset +echo $@ >> /tmp/restore.out +#TEMPLATES="/usr/share/templates/settings" +TEMPLATES="$TEMPLATES/settings" +TABLES="settings keybindings" +MYTHDBUSER=mythtv +MYTHTVPASSWD=mythtv +declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho" +Thistemplate="" +declare -i OVERRIDE=0 +declare -i EVERYTHING=0 + +function CMD_DEFINE () { + #add override check + if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ] + then + MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" + MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" + MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";" + else + MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" + MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" + MYSQLCMD_UPDATE_HOST="select hostname from settings;" + fi +} + +function SQL_DEFINE () { + #$1 is the table name + if [ $1 = "settings" ] + then + ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )" + else + ALTERSQL=";" + fi + + CREATESQL="create table temp_${1}_${hostname} like $1;" + COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");" + INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" + #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" + DROPSQL="delete from $1 where hostname=\"$hostname\";" + COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");" + DROP_TABLE="Drop table temp_${1}_${hostname}" +} + +function ARG_ERR() { + if [ x$OPTARG = "x" ] + then + echo "$SWITCH NEEDS AND ARG" + exit 11 + fi +} + +function ALSADEVICE () { +#ALSA:hw:1,4 + if [ x$Audiotype = xALSA ] + then + SoundDevice=ALSA:$SoundDevice + fi +} + + + +if [ $# -eq 0 ] +then + echo "Valid options are:" + echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)" + echo " -t (syssettings|hostsettings)" + echo " -d databasename" + echo " -h hostname" + echo " -s systemtype (master|slave|standalone|frontendonly)" + echo " -a ipaddress" + echo " -z zipcode" + echo " -o override (only used upgrade installs)" + exit 1 +fi + + + + +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + # \?) echo "unkown option" + # exit 11 ;; + c) echo "$SWITCH" "$OPTARG" + ARG_ERR + OPERATION=$OPTARG + ;; + t) echo "$SWITCH" "$OPTARG" + ARG_ERR + Thistemplate=$OPTARG + + if [ x$Thistemplate = x"syssettings" ] + then + echo "template is syssettings" + loadhost=false + elif [ x$Thistemplate = x"hostsettings" ] + then + echo "template is hostsettings" + Thistemplate=syssettings + loadhost=true + else + echo "invalid template name" + exit 1 + fi + ;; + d) echo "$SWITCH" "$OPTARG" + ARG_ERR + if [ $OVERRIDE = 1 ] + then + ovdbhost=$OPTARG + else + dbhost=$OPTARG + fi + ;; + h) echo "$SWITCH" "$OPTARG" + ARG_ERR + if [ $OVERRIDE = 1 ] + then + oldhostname=$hostname + hostname=$OPTARG + else + hostname=$OPTARG + fi + + ;; + s) echo "$SWITCH" "$OPTARG" + ARG_ERR + SYSTEMTYPE=$OPTARG + ;; + a) echo "$SWITCH" "$OPTARG" + ARG_ERR + IP_ADDRESS=$OPTARG + ;; + z) echo "$SWITCH" "$OPTARG" + ARG_ERR + ZIPCODE=$OPTARG + ;; + o) OVERRIDE=1 + ;; + + esac +done + +echo $OVERRIDE + +#setup the Mysql commands +CMD_DEFINE + +$MYSQLCMD_C "show tables" > /dev/null +status=$? +if [ $status = 1 ] +then + echo "$@ failed" + echo "$@ failed" >> /tmp/restore.out + exit 1 +fi + + + + + + + +case $OPERATION in + + restore) + #used to restore settings from syssettings + if [ -d $TEMPLATES/$Thistemplate ] + then + cd $TEMPLATES/$Thistemplate + if [ $loadhost = false ] + then + for i in $TABLES + do + SQL_DEFINE $i + sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt + #echo $MYSQLCMD "$SELECTSQL" + echo $i + $MYSQLCMD "$CREATESQL" + $MYSQLCMD "$ALTERSQL" + $MYSQLCMD "$COPY_TMP_SQL" + $MYSQLCMD "$INSERTSQL" + $MYSQLCMD "$DROPSQL" + $MYSQLCMD "$COPY_BCK_SQL " + $MYSQLCMD "$DROP_TABLE " + #rm /tmp/$i.txt + done + fi + if [ $loadhost = true ] + then + #only load the settings table with values HOST + i=settings + SQL_DEFINE $i + sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt + echo $i + $MYSQLCMD "$CREATESQL" + $MYSQLCMD "$ALTERSQL" + $MYSQLCMD "$INSERTSQL" + $MYSQLCMD "$COPY_TMP_SQL" + $MYSQLCMD "$DROPSQL" + $MYSQLCMD "$COPY_BCK_SQL" + $MYSQLCMD "$DROP_TABLE " + fi + else + echo "couldn't find $TEMPLATES/$Thistemplate" + fi + ;; + + save) + + if [ ! -d $TEMPLATES/$Thistemplate ] + then + mkdir -p $TEMPLATES/$Thistemplate + fi + + cd $TEMPLATES/$Thistemplate + for i in $TABLES + do + EXTRACLAUSE="" + case $i in + settings) + EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value" + SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt + ;; + keybindings) + SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt + ;; + esac + # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i + + done + ;; + + load) + + #will load both default_1 and default_2 unless either file is not found + for i in default_1 default_2 + do + if [ -f $TEMPLATES/$i/settings.txt ] + then + echo $i + for tablename in $TABLES + do + #create table + CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;" + $MYSQLCMD_C "$CREATESQL" + #truncate table + TRUNCATESQL="truncate ${tablename}_${i} " + $MYSQLCMD_C "$TRUNCATESQL" + #load table + INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';" + $MYSQLCMD_C "$INSERTSQL" + #update_hostname + UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; " + $MYSQLCMD_C "$UPDATEHOSTNAMESQL" + done + else + + echo "couldn't find $TEMPLATES/$i/settings.txt template to load" + fi + CREATESQL="create table IF NOT EXISTS settings_user1 like settings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS settings_user2 like settings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS settings_user3 like settings;" + $MYSQLCMD_C "$CREATESQL" + + CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + done +;; + + + + BECONFIG) + if [ $SYSTEMTYPE = "master" ] + then + $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';" + $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" + fi + + if [ $SYSTEMTYPE = "slave" ] + then + $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" + fi + ;; + ZIP) + $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";" + $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";" + ;; + MUSICFRONT) + ALSADEVICE + $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";" + #need to reload the settings. + systemconfig.sh reloadfe + ;; + MUSICMYTH) + ALSADEVICE + $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";" + ;; + uhostname) + #used when the hostname is changed. + TABLES="settings capturecard keybindings storagegroup recorded" + for i in $TABLES + do + USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;" + $MYSQLCMD_C "$USQL" + done + + ;; + USERJOBALLOW) + SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;" + $MYSQLCMD_C "$SQL" + ;; + + ACCESSCONTROL) + LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound" + + for i in $LIST + do + $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";" + done + SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;" + $MYSQLCMD_C "$SQL" + esac + +#SELECT * INTO OUTFILE 'data.txt' +# FIELDS TERMINATED BY ',' +# FROM table2; + + diff --git a/abs/core-testing/LinHES-config/restore_km_db_chroot.sh b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh new file mode 100644 index 0000000..9467ffd --- /dev/null +++ b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh @@ -0,0 +1,53 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +set -x +#myhost=`cat /etc/hostname` +myhost=$hostname +hostname $myhost +mount -t proc none /proc +DBFILE=$1 + +if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] + then + #restore database + pacman --noconfirm -Sf mysql + status=1 + mysqlstatus=1 + while [ ! $status = 0 ] + do + /etc/rc.d/mysqld stop + sleep 1 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + #load database + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + echo "restoring old database" + gunzip -c /myth/backup/mythconverg.sql.gz > /myth/backup/mythconverg.sql + mysql mythconverg < /myth/backup/mythconverg.sql + + + if [ -d /var/lib/mysql/mythconverg ] + then + status=0 + fi + fi + fi + done + rm -f /myth/backup/mythconverg.sql + else + exit 0 + fi + +#/etc/rc.d/mysqld stop +#umount /proc + + + diff --git a/abs/core-testing/LinHES-config/soundconfig.sh b/abs/core-testing/LinHES-config/soundconfig.sh new file mode 100755 index 0000000..1adb447 --- /dev/null +++ b/abs/core-testing/LinHES-config/soundconfig.sh @@ -0,0 +1,248 @@ +#!/bin/bash +. /etc/systemconfig +. /etc/profile +echo $@ >/tmp/audio.call +#set -x +BASE="" +. /etc/profile +#TEMPLATES="/usr/share/templates" +TESTFILE="$TEMPLATES/audio/space_battle_A.wav" +OSSinstalled="false" + +function testaudio () { + +ossplay -d$AUDIODEVICE $TESTFILE + +} + +function load_alsa() { + + remove_service.sh alsa-utils +# cd /lib/modules/2.6.21-STB + KER=`uname -r` + cd /lib/modules/$KER/kernel/ + tar -xvf alsa-$KER.tar + pacman -Sf --noconfirm alsa-lib + + depmod -a + cd - + udevsettle + udevsettle + udevtrigger + + add_service.sh alsa-utils + sleep 4 + sv start alsa-utils +} + + +function unload_alsa () { +#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}') + sv stop alsa-utils + remove_service.sh alsa-utils + rm -rf /dev/adsp* + rm -rf /dev/snd/* + rm -rf /dev/audio + modprobe -r $(lsmod |grep ^snd |awk '{print $1}') +} + +function unload_oss { + sv stop oss + soundoff + rm -rf /dev/dsp* + rm -rf /dev/oss* + rm -rf /dev/sndstat + remove_service.sh oss +} + +function installOSS { + echo "installing oss" + add_service.sh oss + sleep 4 + sv start oss +} + + +function SYNCXINE { +echo "modify xine config file" + if [ -f /data/home/mythtv/.xine/config ] + then + cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config + else + cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config + fi + + if [ x$Audiotype = xOSS ] + then + DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp ` + sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \ + -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \ + -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \ + -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \ + $TEMPLATES/xine.config > /data/home/mythtv/.xine/config + else + cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config + fi + +} + +function SYNCMPLAYER { +echo "modify mplayer not implmented yet" +} + +function SYNCMYTHMUSIC { +echo "sync mythmusic" +$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH +} + +function SYNCMYTHFRONTEND { +echo "sync mythfrontend" +$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT +} + + +function checkOSSinstalled () { + ossinfo 1>/dev/null + resultcode=$? + echo $resultcode + if [ $resultcode = 0 ] + then + OSSinstalled='true' + else + OSSinstalled='false' + fi +} + +function sound_config_system { + + if [ x$syncXine = x1 ] + then + SYNCXINE + fi + if [ x$syncMplayer = x1 ] + then + SYNCMPLAYER + fi + if [ x$syncMythMusic = x1 ] + then + SYNCMYTHMUSIC + fi + if [ x$syncMythFrontend = x1 ] + then + SYNCMYTHFRONTEND + fi + +} + +function loadsound (){ + checkOSSinstalled + if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] + #then + # if [ $OSSinstalled = "false" ] + then + while [ $OSSinstalled = "false" ] + do + unload_alsa + rm /tmp/.alsatest + installOSS + installOSS + sleep 2 + checkOSSinstalled + done + # fi + else + touch /tmp/.alsatest + unload_oss + load_alsa + load_alsa + rm /tmp/.alsatest + + fi + +} + + + + +#####################MAIN PROGRAM########################## + +declare -r OPTSTRING="i:t:d:" + +if [ $# -eq 0 ] +then + echo "Valid options are:" + echo " -i (oss|alsa) oss or alsa subsystem " + echo " -t (test|real|LOAD) " + echo " -d device" + exit 1 +fi + + + + +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + \?) echo "unkown option" + exit 11 ;; + i) echo "$SWITCH" "$OPTARG" + AUDIOTYPE="$OPTARG" + ;; + d) echo "$SWITCH" "$OPTARG" + AUDIODEVICE=$OPTARG + ;; + t) echo "$SWITCH" "$OPTARG" + SOUNDOPTYPE="$OPTARG" + if [ x"$OPTARG" = xtest ] + then + TEST=true + else + TEST=false + fi + + + ;; + + esac +done + + + + +case $SOUNDOPTYPE in + REAL|real ) + loadsound + sound_config_system + ;; + test|TEST) + echo $@ > /tmp/audio.test + #loadsound + if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] + then + echo "testing OSS $AUDIODEVICE " + ossplay -d$AUDIODEVICE $TESTFILE + else + echo "testing ALSA $AUDIODEVICE " + aplay --device=$AUDIODEVICE $TESTFILE + fi + + ;; + + LOAD|load) + loadsound + ;; + esac + + +exit 0 + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/startx b/abs/core-testing/LinHES-config/startx new file mode 100755 index 0000000..0ffdf8c --- /dev/null +++ b/abs/core-testing/LinHES-config/startx @@ -0,0 +1,29 @@ +#!/bin/bash +. /etc/profile + +export USER=root +export HOME=/root +#TEMPLATES=/usr/share/templates + +CMDLINE=$(cat /proc/cmdline) +TEMPVAR=${CMDLINE#*ip=} +IP=${TEMPVAR%% *} +echo $CMDLINE |grep -q vnc +USEVNC=$? + +if [ x$USEVNC = x1 ] +then + $MV_ROOT/bin/xconfig.sh + cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install + startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail + else + #VNC + pacman -Sf --noconfirm tightvnc + cd /root + mkdir .vnc + echo mythvantage |vncpasswd -f > /root/.vnc/passwd + chmod 500 /root/.vnc/passwd + rm /root/.vnc/xstartup + ln -s /root/live-install.sh /root/.vnc/xstartup + vncserver +fi diff --git a/abs/core-testing/LinHES-config/systemconfig.sh b/abs/core-testing/LinHES-config/systemconfig.sh new file mode 100755 index 0000000..845c67c --- /dev/null +++ b/abs/core-testing/LinHES-config/systemconfig.sh @@ -0,0 +1,1255 @@ +#!/bin/bash +################################################################### +#Script to configure your system based off the values in /etc/systemconfig +#Any changes made to config files will be removed when systemconfig.sh is run +# +#JM +################################################################### +#set -x +. /etc/profile +#MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2` +MVRELEASE=`cat /etc/LinHES-release ` +echo $@ >/tmp/systemconfig.call +echo "----------------------start of systemconfig $@ ----------------------" +BASE="" + +#TEMPLATES="/usr/share/templates" +. /etc/profile +. $MV_ROOT/bin/networkconfig.sh +PACMAN="pacman --noconfirm" +postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype` +PKGBLACKLIST=$BASE/etc/blacklist.package + +if [ x$1 = x"Mysql_only" ] + then + rm -f /tmp/mysql.txt + sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt + exit 0 + fi + + +if [ -f /etc/systemconfig ] +then + . /etc/systemconfig +TEMPNET="Hostip"$default_interface +echo $TEMPNET +eval MYTHIP=\$${TEMPNET} +else + echo "could not find /etc/systemconfig" + exit 1 +fi + + + +#----------------------------------------------------- + + +function setupmysql { +#setup mysql.txt to find the database servers + if [ $SystemType = "Master_backend" ] + then + if [ $MYTHDHCP = 0 ] + then + #this grabs eth0, as that is all thats supported. +# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old + cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + ##logic to change master_serverip and backend_serverip in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + else + + dbhost=$MYTHIP + sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old + cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + #logic to change dbhost in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + fi + fi + + if [ $SystemType = "Slave_backend" ] + then + if [ $MYTHDHCP = 0 ] + then + #this grabs eth0, as that is all thats supported. + #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + ##logic to change backend_serverip in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost + else + slavehost=$MYTHIP + + #logic to change backend_serverif in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost + fi + fi + + MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt + if [ $SystemType = "Standalone" ] + then + sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT + else + sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT + fi + rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt + rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt + if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ] + then + cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT + fi + + chmod 755 $MYSQLTXT + chown mythtv $MYSQLTXT + +} + +function setupmysqlnetwork(){ +MFILE=etc/my.cnf +grep "#skip-networking" $BASE/$MFILE +status=$? + + + + if [ $SystemType = "Standalone" ] + then + sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE + if [ $status = 0 ] + then + sudo sv restart mysql + echo "restarting mysql with no network" + fi + + fi + + if [ $SystemType = "Master_backend" ] + then + sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE + if [ $status = 1 ] + then + sudo sv restart mysql + echo "restarting mysql with network" + fi + + fi + + +} + + +function settimezone { +#set the timezone +if [ x"$timezone" = x ] +then + timezone="unknown" +fi +rm ${BASE}/etc/localtime +echo $timezone +ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime + sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf + + # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock + # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock + # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock +cp $TEMPLATES/rc.conf /etc/rc.conf + +} + + +function setupreceiver { + case $ReceiverType in + tinker) echo "do nothing" + ;; + Serial) echo "setup serial lirc" + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage + /usr/bin/load-modules-mythvantage.sh + ;; + Usb-imon) echo "setup receiver-usb-imon" + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage + /usr/bin/load-modules-mythvantage.sh + ;; + *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + ;; + esac + + +} + +function setupremote { + case $Remotetype in + no_remote) echo "No remote selected" + daemon_remove="lircd $daemon_remove" + ;; + tinker) echo "Remote in tinker mode" + ;; + *) echo "Setup remote" + mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` + cd $TEMPLATES/remotes/$Remotetype + for i in lircd* + do + cat $i >> ${BASE}/etc/lircd.conf + done + cp lircrc ${BASE}/etc/lircrc + if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] + then + cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc + cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf + fi + if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ] + then + cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf + fi + chmod 755 /etc/lircrc + daemon_add="lircd $daemon_add" + sv hup lircd + ;; +esac + +} + +function setupblaster { + #cd $TEMPLATES/transmit/$Blastertype + #for i in lircd* + #do + # cat lircd.conf >> ${BASE}/etc/lircd.conf + #done + # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` + sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh + chmod 755 ${BASE}/usr/bin/change_chan.sh + #channel change script change + setupremote + +} + +function setupevrouter { + if [ x$UseEvrouter = x1 ] + then + case x$EvrouterConfig in + xtinker ) + echo "do nothing for evrouter" + ;; + x ) echo "empty evrouter" + ;; + * ) echo "setup evrouter for $EvrouterConfig " + cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg + daemon_add="evrouter Xvfb $daemon_remove" + + ;; + esac + else + # disable evrouter + daemon_remove="evrouter Xvfb $daemon_remove" + fi + + + + +} + +function setupLCD { + case x$LCDtype in + xtinker) echo "do nothing" + ;; + xno_lcd) echo "disabling lcd" + sv down lcdd + /usr/bin/load-modules-mythvantage.sh UNLOAD LCD + sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage + daemon_remove="lcdd $daemon_remove" + ;; + x) echo "empty lcd" ;; + + *) echo "setup lcd" + if [ -f $TEMPLATES/LCD/$LCDtype/modules ] + then + sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage + cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage + #should also modprobe + fi + + + if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] + then + cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc + # install="lcdproc $install" + daemon_add="lcdd $daemon_add" + /usr/bin/load-modules-mythvantage.sh + RESTART_FE="true" + RESTART_LCD="true" + fi + #check if lirc capable,if so then call setupremote + if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] + then + setupremote + fi + ;; + esac + +} + + + +function scrubnfs { + cp /etc/fstab $TEMPLATES/fstab.conf.template + grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab + } + +function setupfstab () { +# setupfstab $NFSserver $NFSshare $NFSmount + echo "$1 $2 nfs" >> ${BASE}/etc/fstab + if [ ! -e "$2" ] + then + mkdir -p "$2" + chown mythtv:mythtv "$2" + fi + if [ x$DCONFIG = x ] + then + mount $2 & + fi + +} + +function setupncidclient +{ + sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf +} + +function setupnciddaemon { + cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template + sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf + +} + +function setupntp () { +cat > ${BASE}/etc/ntp.conf << EOF +# default restrictions +restrict default noquery notrust nomodify +# NTP drift file - used to keep track of your system clocks +# time deviation +driftfile /etc/ntp.drift + +# NTP log file +logfile /var/log/ntp.log +# override the default restrictions here, servers that can query +restrict 192.168.0.0 mask 255.255.0.0 nomodify +restrict 10.0.0.0 mask 255.0.00 nomodify + +#servers to sync with +EOF + #this is used for backend or standlone types + if [ $1 = "1" ] + then + echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf + echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf + echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf + echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf + + else + echo "server $dbhost" >> ${BASE}/etc/ntp.conf + echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf + fi + + +} + +function setupplugins (){ + +pkglistinstall="" +pkglistremove="" +#default enabled +for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo +do +eval pkgvalue=\$${i} + +if [ x$pkgvalue = x ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + if [ x$pkgvalue = x1 ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + pkglistremove="$pkglistremove $i$postfix" + fi + fi + + + +done + + + +#default disabled + for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather + do +eval pkgvalue=\$${i} + +if [ x$pkgvalue = x ] + then + pkglistremove="$pkglistremove $i$postfix" + else + if [ x$pkgvalue = x1 ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + pkglistremove="$pkglistremove $i$postfix" + fi + fi + done +install="$pkglistinstall $install" +remove="$pkglistremove $remove" + +} +function LCDcheck () { + case x$LCDtype in + xtinker) echo "do nothing lcd " + ;; + xno_lcd) echo "no lcd " + ;; + xxosd) install="xosd lcdproc $install" + ;; + x) echo "lcd empty " + ;; + *) + install="lcdproc $install" + ;; +esac +} + + +function packages () { +#see which plugins need to be installed +echo " Starting to install Packages" +setupplugins +LCDcheck +if [ ! -f $PKGBLACKLIST ] +then + touch $PKGBLACKLIST +fi + for i in $remove + do + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` + if [ $? = 0 ] + then + if [ $i = "mythweb$postfix" ] + then + pacman --noconfirm -R mythweb$postfix + echo removed $i + else + pacman --noconfirm -Rs $i + echo removed $i + fi + fi + else + echo "$i is black listed" + fi + done + # fi + + for i in $install + do + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` + # echo $VAR |grep -vq error: + + if [ ! $? = 0 ] + then + pacman --noconfirm -Sf $i + echo installed $i + else + echo "$i already installed" + fi + else + echo "$i is black listed" + fi + done +} + +function daemons { +echo "Daemons on boot" + + for i in $daemon_remove + do + sv check $i 1>/dev/null + status=$? + if [ $status -eq 0 ] + then + sv down $i + fi + remove_service.sh $i + done + + + for i in $daemon_add + do + sv check $i 1>/dev/null + status=$? + add_service.sh $i + + if [ $status -eq 0 ] + then + case $i in + mysql*) sv hup $i + ;; + mythback*) sv hup $i + ;; + lirc* ) sv hup $i + ;; + frontend) sv check frontend 1>/dev/null + ;; + + smbd ) sv hup $i + ;; + nmbd ) sv hup $i + ;; + evrouter) sv restart $i + ;; + *) sv down $i + sleep 1 + sv up $i + ;; + esac + fi + + done + +} + + +function services +{ +ser_install="" +ser_daemon_add="" +ser_remove="" +ser_daemon_remove="" +if [ x$UseEvrouter = x1 ] +then + ser_daemon_add="evrouter Xvfb $ser_daemon_add" +else + ser_daemon_remove="evrouter Xvfb $ser_remove" +fi + +if [ x$RunDHCP = x1 ] +then + ser_daemon_add="dnsmasq $ser_daemon_add" + ser_install="dnsmasq mvpmc $ser_install" + +else + ser_daemon_remove="dnsmasq $ser_daemon_remove" + ser_remove="dnsmasq mvpmc $ser_remove" +fi + +if [ x$RunFrontend = x1 ] +then + ser_daemon_add="frontend hal $ser_daemon_add" + ser_install=" $ser_install" + showX=true + else + ser_daemon_remove="frontend hal $ser_daemon_remove" + ser_remove="$ser_remove" + fi + +if [ x$UseMythWEB = x1 ] +then + ser_install="lighttpd mythweb$postfix $ser_install" + ser_daemon_add="lighttpd $ser_daemon_add" + else + ser_remove="mythweb$postfix $ser_remove" + ser_daemon_remove="$ser_daemon_remove" + fi + +#samba +if [ x$UseSamba = x1 ] +then + ser_install="samba $ser_install" + ser_daemon_add="nmbd smbd $ser_daemon_add " + if [ x$Samba_mediareadonly = x1 ] + then + smreadonly="no" + else + smreadonly="yes" + fi + + if [ x$Samba_homereadonly = x1 ] + then + shreadonly="no" + else + shreadonly="yes" + fi + + if [ ! -d ${BASE}/etc/samba ] + then + mkdir ${BASE}/etc/samba + fi + + if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ] + then + install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf + else + sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \ + -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf + + if [ x$Samba_media = "x1" ] + then + echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf + sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media + fi + + if [ x$Samba_home = "x1" ] + then + echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf + sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home + + fi + + fi +else + ser_remove="samba $ser_remove" + ser_install="smbclient $ser_install" + ser_daemon_remove="smbd nmbd $ser_daemon_remove" +fi + + +if [ x$UseNFS = x1 ] +then + ser_install="nfs-utils portmap $ser_install" + ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" + sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports + +else + ser_remove="$ser_remove" + ser_daemon_remove="nfsd nfslock $ser_daemon_remove" +fi + +if [ x$Runncidd = x1 ] +then + ser_daemon_add="ncidd ncid $ser_daemon_add" + ser_install="ncid $ser_install" + else + ser_daemon_remove="ncidd ncid $ser_daemon_remove" + ser_remove="ncid $ser_remove" + fi + +#Setting the default, just to avoid the or statement.. +if [ x$UseHobbit = x ] +then + UseHobbit=0 +fi + +if [ x$UseHobbit = x1 ] +then + case $SystemType in + Standalone|Master_backend ) + ser_daemon_add="hobbit $ser_daemon_add" + ser_install="hobbitserver $ser_install" + ;; + + *) ser_daemon_add="hobbit-client $ser_daemon_add" + ser_install="hobbit-client $ser_install" + ;; + esac +else + ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove" + ser_remove="hobbit-client hobbitserver $ser_remove" + rm -f /data/srv/httpd/htdocs/hobbit/index.html + + fi + + + +} + + + +function setupsleep { +if [ x$AutoShutdown = x1 ] +then + cronshutdowntime="" + if [ x$Shutdowntime != x-1 ] + then + cronshutdowntime=$Shutdowntime + fi + if [ x$Shutdowntime2 != x-1 ] + then + if [ x$cronshutdowntime = x ] + then + cronshutdowntime=$Shutdowntime2 + else + cronshutdowntime="${cronshutdowntime},${Shutdowntime2}" + fi + fi + + sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv +else + sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv +fi + +} + + +function setuppacman () { +#setup link to httpd dir +echo "Configuring pacman" + if [ ! x$1 = x ] + then + ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo + echo "creating the link for the pacman repo mirror" + fi + + for i in mv-core mv-core-testing mv-extra mv-extra-testing + do + echo "[$i]" > ${BASE}/etc/pacman.d/$i + #add mirror if needed + if [ x$PKG_MIRROR = x1 ] + then + echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i + fi + #add user templates + USERTEMPLATES="/data/home/mythtv/templates" + if [ -f $USERTEMPLATES/sources/$i ] + then + echo "Adding user $i" + cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i + fi + cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i + echo "setting local mirror to $dbhost for $i " + done + + #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg + + +} + + +function setupzipcode () { + if [ ! x$zipcode = x ] + then + ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode + fi +} + +function process_nfsmap () { +#first look for a local copy of nfsmap +if [ $1 = noip ] +then + if [ -f /data/home/mythtv/templates/nfsmap ] + then + NFSMAP="/data/home/mythtv/templates/nfsmap" + else + mv -f /tmp/nfsmap /tmp/nfsmap.old + wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap + if [ $? = 0 ] + then + NFSMAP="/tmp/nfsmap" + fi + fi +else + mv -f /tmp/nfsmap /tmp/nfsmap.old + wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap + if [ $? = 0 ] + then + NFSMAP="/tmp/nfsmap" + fi +fi + + if [ -f $NFSMAP ] + then + #read in file + while read line + do + NFSserver=`echo "$line"|cut -d" " -f1` + NFSmount=`echo "$line"|cut -d" " -f2` + setupfstab $NFSserver $NFSmount + done <$NFSMAP + else + echo "couldn't find nfsmap" + + fi +} + +function setupcnfs () { + scrubnfs + if [ $HaveCentralNFS = "yes" ] + then + case x$NFSserver in + xfile:nfsmap ) + process_nfsmap noip + ;; + *:nfsmap ) + nfsmapip=`echo "$NFSserver" | cut -d: -f1 ` + process_nfsmap $nfsmapip + ;; + *) setupfstab $NFSserver $NFSmount + esac + + #if [ ! x"$NFSserver" = "xfile:nfsmap" ] + #then + # setupfstab $NFSserver $NFSmount + #else + # process_nfsmap + #fi + else + echo "fe_nfs" + #if no central nfs found, then use the mbe. + if [ $SystemType = "Frontend_only" ] + then + setupfstab ${dbhost}:/data/media /data/media + fi + fi + +} + +function setupbootsplash () { + +if [ x$Usebootsplash = x1 ] +then + COMMAND="%s/^default.*0/default 1/g" +else + COMMAND="%s/^default.*1/default 0/g" +fi + +ex ${BASE}/boot/grub/menu.lst <<EOF +:$COMMAND +:wq +EOF + +} + +function setuphobbitclient () { +COMMAND="%s/^BBDISP=.*$/BBDISP=$dbhost/g" + + +ex ${BASE}/data/srv/hobbit/client/etc/hobbitclient.cfg <<EOF +:$COMMAND +:wq +EOF + +} + +function setupSyslog () { +COMMAND="%s/^destination d_remote.*$/destination d_remote \{tcp\(\"${dbhost}\" port\(514\)\) \;\} \;/" +ex ${BASE}/etc/syslog-ng.conf <<EOF +:$COMMAND +:wq +EOF + + + + +} + +function setupfuncminion () { +COMMAND="%s/^certmaster.*$/certmaster = ${dbhost}/" +ex ${BASE}/etc/func/minion.conf <<EOF +:$COMMAND +:wq +EOF +} + +function setupDNSMASQ(){ +if [ x$RunDHCP = x1 ] +then + echo "DNSMASQ setup" + +#set default route to my GW +COMMAND="%s/^dhcp-option=3.*$/dhcp-option=3,${route}/" +ex ${BASE}/etc/dnsmasq.conf <<EOF +:$COMMAND +:wq +EOF + +#setup dns to my ip +COMMAND="%s/^dhcp-option=6.*$/dhcp-option=6,${ip}/" +ex ${BASE}/etc/dnsmasq.conf <<EOF +:$COMMAND +:wq +EOF + + +#change nfsroot to my ip +COMMAND="%s/nfsroot=.*:/nfsroot=${ip}:/" +ex ${BASE}/data/srv/tftp/pxelinux.cfg/default <<EOF +:$COMMAND +:wq +EOF + +#add 127.0.0.1 to /etc/resolv.conf + echo "search lan" > ${BASE}/etc/resolv.conf + echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf + echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf +fi + +#setup dongle.config +COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /" +ex ${BASE}/data/srv/tftp/dongle.bin.config <<EOF +:$COMMAND +:wq +EOF + + + +#setup dongle.config + +} + +function reloadfe(){ + PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'` + /usr/bin/backend_control.sh clearcache behost $dbhost + if [ x$RESTART_LCD = xtrue ] + then + killall -9 mythlcdserver + fi + kill -s USR1 $PID + +} + + +function setup_db (){ + + install="mysql avahli" + daemon_add="mysql" + packages + daemons +status=1 +mysqlstatus=1 +while [ ! $status = 0 ] +do + sv stop mysql + sleep 1 + sv start mysql + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + $MV_ROOT/bin/restore_default_settings.sh -c load + if [ $SystemType = "Master_backend" ] + then + $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + fi + #update database to allow user jobs on this host. + $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW + $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + if [ -d /data/srv/mysql/mythconverg ] + then + pacman --noconfirm -R webcalendar + pacman --noconfirm --nodeps -S webcalendar + status=0 + fi + fi + fi +done +} + + +#----------------------------------------------------MAIN PROGRAM------------------------------------------- +#misc,sleep,hostype,advanced,audio +eval LAST=\$$# +LIST=`echo $LAST | tr , " " ` + +hosttypechange="false" + + +for i in $LIST + do + echo $i + case $i in + misc) showmisc="true" + ;; + sleep) showsleep="true" + ;; + hostype) showhost="true" + showX="true" + ;; + hostypec) hosttypechange="true" + ;; + advanced) showadvanced="true" + #showhost="true" + ;; + audio) showaudio="true" + ;; + network) shownetwork="true" + ;; + advancedX) showX="true" + ;; + restartfe) killall -9 mythfrontend + killall -9 mythwelcome + exit 0 + ;; + reloadfe) reloadfe + ;; + + this_is_install) MV_NEW_INSTALL="true" + ;; + + esac + done + +if [ x$MV_NEW_INSTALL = xtrue ] +then + hosttypechange="false" +fi + + + +# exit 1 + +#network +if [ x"$shownetwork" = xtrue ] +then + OLDHOSTNAME=`hostname` + NEWHOSTNAME=$hostname + if [ ! $OLDHOSTNAME = $NEWHOSTNAME ] + then + + ${MV_ROOT}/bin/restore_default_settings.sh -cuhostname -o -h$OLDHOSTNAME + RESTART_FE="true" + hostname $NEWHOSTNAME + if [ $SystemType != "Frontend_only" ] + then + sv restart mythbackend + fi + + fi + + setup_network + CMDLINE=$(cat /proc/cmdline) + echo $CMDLINE |grep -q netboot + NETBOOT=$? + if [ x$NETBOOT = x1 ] + then + echo "loading network" + ${BASE}/etc/net/scripts/network.init reload + else + echo "netboot, will not start network" + fi +fi + + +if [ x$showhost = "xtrue" ] +then +case $SystemType in + Standalone) + setupntp 1 + services + if [ x$hosttypechange = "xtrue" ] + then + setup_db + fi + if [ -f ${BASE}/etc/avahi/services/mysql.service ] + then + rm -f ${BASE}/etc/avahi/services/mysql.service + sudo sv restart avahi + fi + + install="mysql mythdb-initial avahli portmap local-website $ser_install" + + + remove="none $ser_remove" + + daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add" + daemon_remove="none $ser_daemon_remove" + + ;; + Master_backend) + setupntp 1 + services + + if [ ! -f ${BASE}/etc/avahi/services/mysql.service ] + then + mkdir ${BASE}/etc/avahi/services + cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service + sudo sv restart avahi + fi + + install="mysql mythdb-initial avahi portmap local-website myth2ipod mythtv-status $ser_install " + remove="$ser_remove" + + daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add" + daemon_remove="$ser_daemon_remove" + ;; + Slave_backend) + setupntp 0 + services + if [ x$hosttypechange = "xtrue" ] + then + setup_db + fi + if [ -f ${BASE}/etc/avahi/services/mysql.service ] + then + rm -f ${BASE}/etc/avahi/services/mysql.service + sudo sv restart avahi + fi + + #cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service + install="mysql avahi local-website $ser_install " + remove=" $ser_remove" + + daemon_add="mythbackend avahi portmap lighttpd $ser_daemon_add" + daemon_remove="$ser_daemon_remove" + ;; + Frontend_only) + #Add values for services + setupntp 0 + services + if [ -f ${BASE}/etc/avahi/services/mysql.service ] + then + rm -f ${BASE}/etc/avahi/services/mysql.service + sudo sv restart avahi + fi + + install="libmysqlclient mysql-clients portmap avahi local-website $ser_install" + remove="mysql mythweb$postfix $ser_remove" + + daemon_add="avahi portmap lighttpd $ser_daemon_add " + daemon_remove="mysql mythbackend $ser_daemon_remove" + ;; + + +esac +#setupSyslog + +fi + +#apply these to ALL types + + + + +#systemtype + +if [ x$showhost = "xtrue" ] +then + setupmysqlnetwork + setupmysql + setupremote + #grab the new dbhost key + #/usr/bin/grabkey.py +fi + +#audio + +if [ x$showaudio = "xtrue" ] +then + #setupsoundtype + if [ ! x$Audiotype = xtinker ] + then + ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice + fi +fi + +#should always run +packages + +#misc + +if [ x$showmisc = "xtrue" ] +then + setupzipcode + settimezone + setupcnfs +fi + +#sleep +if [ x$showsleep = "xtrue" ] +then + setupsleep +fi + +if [ x$showX = "xtrue" ] +then + ${MV_ROOT}/bin/xconfig.sh +fi + +#advanced +if [ x$showadvanced = "xtrue" ] +then + if [ ! x$showhost = "xtrue" ] + then + services + install="none $ser_install" + remove="none $ser_remove" + daemon_add=" none $ser_daemon_add" + daemon_remove="none $ser_daemon_remove" + packages + + + if [ x$SystemType = xMaster_backend ] + then + setuppacman link + else + setuppacman + fi + fi + setupncidclient + setupnciddaemon + setupbootsplash + setuphobbitclient + setupreceiver + setupevrouter + setupblaster + setupLCD + setupDNSMASQ + +fi + + + +daemons +#add check for lcd, and restart if needed. + +if [ x$RESTART_FE = xtrue ] +then + reloadfe +fi + + + + + +case $SystemType in + Standalone) smoltsystem=6 + MVRELEASE="$MVRELEASE (Standalone)" + ;; + Master_backend) + if [ x$RunFrontend = x1 ] + then + smoltsystem=2 + MVRELEASE="$MVRELEASE (MBE with Frontend)" + else + smoltsystem=1 + MVRELEASE="$MVRELEASE (MBE)" + fi + ;; + Slave_backend) + if [ x$RunFrontend = x1 ] + then + smoltsystem=5 + MVRELEASE="$MVRELEASE (SLAVE with Frontend)" + else + smoltsystem=5 + MVRELEASE="$MVRELEASE (SLAVE)" + fi + ;; + Frontend_only) + smoltsystem=3 + MVRELEASE="$MVRELEASE ( Frontend only)" + ;; +esac +echo $MVRELEASE > /etc/os_myth_release +echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info +echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info + diff --git a/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf new file mode 100644 index 0000000..d49fbf6 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=shuttleVFD +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf new file mode 100644 index 0000000..2596c25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=imon +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules new file mode 100644 index 0000000..cd576c3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules @@ -0,0 +1 @@ +lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf new file mode 100644 index 0000000..2596c25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=imon +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf new file mode 100644 index 0000000..ce64936 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf @@ -0,0 +1,38 @@ + +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007 +# +# contributed by +# +# brand: /tmp/out +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name Antec_fusion_silver_v1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + post_data_bits 16 + post_data 0xFF + gap 131985 + min_repeat 6 + toggle_bit 0 + + + begin codes + CW 0x0001 + CCW 0x0100 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc new file mode 100644 index 0000000..7a39704 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc @@ -0,0 +1,15 @@ +begin + remote = Antec_fusion_silver_v1 + prog = mythtv + button = CW + repeat = 1 + config = ] +end + +begin + remote = Antec_fusion_silver_v1 + prog = mythtv + button = CCW + repeat = 1 + config = [ +end diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules new file mode 100644 index 0000000..cd576c3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules @@ -0,0 +1 @@ +lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf new file mode 100644 index 0000000..5b37bd7 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf @@ -0,0 +1,957 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, +# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, +# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS, +# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=xosd + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# GoodBye message: each entry represents a display line; default: builtin +#GoodBye="Thanks for using" +#GoodBye=" LCDproc!" + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## +[ea65] + +# Device is fixed /dev/ttyS1 +# Width and Height are fixed 9x1 + +# As the VFD is self luminescent we don't have a backlight +# But we can use the backlight functions to control the front LEDs +# Brightness 0 to 299 -> LEDs off +# Brightness 300 to 699 -> LEDs half bright +# Brightness 700 to 1000 -> LEDs full bright +Brightness=500 +# OffBrightness is the the value used for the 'backlight off' state +OffBrightness=0 + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# Some displays (e.g. vdr-wakeup) need a message from the driver to that it +# is still alive. When set to a value bigger then null the character in the +# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0. +#KeepAliveDisplay=0 + +# If you experience occasional garbage on your display you can use this +# option as workaround. If set to a value bigger than null it forces a +# full screen refresh <RefreshDiplay> seconds. Default: 0. +#RefreshDisplay=5 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=480 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# The following table translates from MtxOrb key letters to logical key names. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Mini-box.com picoLCD (usblcd) driver ## +[picolcd] +# This is for the Mini-Box.com usblcd device that ships with the M300. It can +# also be purchased separately but this driver has only been tested on the M300 +# setup. + +# KeyTimeout is the time that LCDd spends waiting for a key press before cycling +# through other duties. Higher values make LCDd use less CPU time and make +# key presses more detectable. Lower values make LCDd more responsive but a +# little prone to missing key presses. 500 (.5 second) is the default and a +# balanced value. +KeyTimeout=500 + +# Contrast: [default: 1000; legal: 0 - 1000] +Contrast=1000 + +# Light the keys? i[default: on; legal: on, off] +Keylights=on + +# If Keylights is on, the you can unlight specific keys below: +# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. +# There is no LED for the +/- keys. This is a handy way to indicate to users +# which keys are disabled. [default: on; legal: on, off] +Key0Light=on +Key1Light=on +Key2Light=on +Key3Light=on +Key4Light=on +Key5Light=on + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) +# Note: Currently only tested with G321D & SP14Q002. +Type=G321D + +# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] +CellSize=6x10 + +# Select what type of connection [legal: classic, bitshaker; default: classic] +ConnectionType=classic + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## serial POS display driver ## +[serialPOS] + +# Device to use in serial modea [default: /dev/lcd] +Device=/dev/lcd + +# Specifies the size of the display in characters. [default: 16x2] +Size=16x2 + +# Set the communication protocol to use with the POS display. +# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] +Type=AEDEX + +# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200] +Speed=9600 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use, in XLFD format, as given by "xfontsel" +Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-* + + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/cc.orig.sh b/abs/core-testing/LinHES-config/templates/cc.orig.sh new file mode 100755 index 0000000..d8fd2dc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc.orig.sh @@ -0,0 +1,35 @@ +#!/usr/bin/perl +# rwraithr added segment for 4 digit channels +# make sure to set this string to +# the corresponding remote in /etc/remoted.conf +#$remote_name = "RC-u43c-1h"; +$remote_name = "$REMOTE_NAME"; + +sub change_channel { + my($channel_digit) = @_; + system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit"); + sleep .5; +} + +$channel=$ARGV[0]; +sleep 1; +if (length($channel) > 3) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); + change_channel(substr($channel,2,1)); + change_channel(substr($channel,3,1)); +} elsif (length($channel) > 2) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); + change_channel(substr($channel,2,1)); +} elsif (length($channel) > 1) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); +} else { + change_channel(substr($channel,0,1)); +} +system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT"); + +#system ("sleep 2"); +#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2"); +#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2"); diff --git a/abs/core-testing/LinHES-config/templates/cc.sh b/abs/core-testing/LinHES-config/templates/cc.sh new file mode 100755 index 0000000..0cce308 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc.sh @@ -0,0 +1,5 @@ +#!/bin/bash +/usr/local/bin/cc.orig.sh $@ & +/usr/local/bin/cc_vol.sh & + + diff --git a/abs/core-testing/LinHES-config/templates/cc_vol.sh b/abs/core-testing/LinHES-config/templates/cc_vol.sh new file mode 100755 index 0000000..819008d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc_vol.sh @@ -0,0 +1,5 @@ +#!/bin/bash +sleep 2 +/usr/local/bin/ivtvctl -p 2 -d /dev/video2 +/usr/local/bin/ivtvctl -p 1 -d /dev/video2 + diff --git a/abs/core-testing/LinHES-config/templates/change_chan.sh b/abs/core-testing/LinHES-config/templates/change_chan.sh new file mode 100755 index 0000000..5ad8765 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/change_chan.sh @@ -0,0 +1,19 @@ +#!/bin/sh +REMOTE_NAME=SA3250 +cmd="$1" + +case $cmd in + [0-9]*) + for digit in $(echo $1 | sed -e 's/./& /g'); do + irsend SEND_ONCE $REMOTE_NAME $digit + sleep 0.3 + # If things work OK with sleep 1, try this for faster channel changes: + # sleep 0.3 + done + ;; + + *) + irsend SEND_ONCE $REMOTE_NAME $cmd + ;; + esac +# /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config/templates/cron.template b/abs/core-testing/LinHES-config/templates/cron.template new file mode 100644 index 0000000..3fcea10 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cron.template @@ -0,0 +1,4 @@ +# <minute> <hour> <day> <month> <dow> <command> + + +00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address new file mode 100644 index 0000000..1df28d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address @@ -0,0 +1,2 @@ +192.168.1.158/24 + diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route new file mode 100644 index 0000000..373a4d1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route @@ -0,0 +1,2 @@ +default via 192.168.1.1 + diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig new file mode 100644 index 0000000..b1f14e0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig @@ -0,0 +1,2 @@ +essid home_lan +#key ababababab diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/options b/abs/core-testing/LinHES-config/templates/etcnet/eth/options new file mode 100644 index 0000000..929da58 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/options @@ -0,0 +1,7 @@ +# If you want to change current interface name, edit /etc/net/iftab, +# rename current directory and uncomment this line: +TYPE=eth +DISABLED=no +BOOTPROTO=dhcp +ONBOOT=yes +CONFIG_WIRELESS=no diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac new file mode 100644 index 0000000..0e3a708 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac @@ -0,0 +1,3 @@ +"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" +"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject" + diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid new file mode 100644 index 0000000..7cb2e34 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid @@ -0,0 +1,3 @@ +"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" +"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject" + diff --git a/abs/core-testing/LinHES-config/templates/exports.template b/abs/core-testing/LinHES-config/templates/exports.template new file mode 100644 index 0000000..b946287 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/exports.template @@ -0,0 +1,8 @@ +# /etc/exports +# +# See exports(5) for a description. + +# use exportfs -arv to reread +/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) +/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) + diff --git a/abs/core-testing/LinHES-config/templates/fstab.conf.template b/abs/core-testing/LinHES-config/templates/fstab.conf.template new file mode 100755 index 0000000..d27bcd9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/fstab.conf.template @@ -0,0 +1,16 @@ +# +# /etc/fstab: static file system information +# +# <file system> <dir> <type> <options> <dump> <pass> +none /dev/pts devpts defaults 0 0 +none /dev/shm tmpfs defaults 0 0 + +/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 +/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 +/dev/fd0 /mnt/fl vfat user,noauto 0 0 + +/dev/sda1 / reiserfs defaults 0 1 +/dev/sda2 swap swap defaults 0 0 +/dev/sda3 /data reiserfs defaults 0 0 +192.168.1.6:/media /data/media nfs + diff --git a/abs/core-testing/LinHES-config/templates/mysql.service b/abs/core-testing/LinHES-config/templates/mysql.service new file mode 100644 index 0000000..160450e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/mysql.service @@ -0,0 +1,13 @@ +<?xml version="1.0" standalone='no'?><!--*-nxml-*--> +<!DOCTYPE service-group SYSTEM "avahi-service.dtd"> + +<service-group> + + <name replace-wildcards="yes">mysql_myth on %h</name> + + <service> + <type>_mysql._tcp</type> + <port>3306</port> + </service> + +</service-group> diff --git a/abs/core-testing/LinHES-config/templates/mysql.txt b/abs/core-testing/LinHES-config/templates/mysql.txt new file mode 100755 index 0000000..04531b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/mysql.txt @@ -0,0 +1,29 @@ +DBHostName=127.0.0.1 +DBUserName=mythtv +DBPassword=mythtv +DBName=mythconverg +DBType=QMYSQL3 + +# Set the following if you want to use something other than the +# machine's real hostname for identifying settings in the database. +# This is useful if your hostname changes often, as otherwise +# you'll need to reconfigure mythtv (or futz with the DB) every time. +# TWO HOSTS MUST NOT USE THE SAME VALUE +# +#LocalHostName=my-unique-identifier-goes-here + +# If you want your frontend to be able to wake your MySQL server +# using WakeOnLan, have a look at the following settings: +# +# Set the time the frontend waits (in seconds) between reconnect tries. +# This should be the rough time your MySQL server needs for startup +#WOLsqlReconnectWaitTime=0 +# +# +# This is the amount of retries to wake the MySQL server until the frontend +# gives up +#WOLsqlConnectRetry=5 +# +# +# This is the command executed to wake your MySQL server. +#WOLsqlCommand=echo 'WOLsqlServerCommand not set' diff --git a/abs/core-testing/LinHES-config/templates/ncid.conf.template b/abs/core-testing/LinHES-config/templates/ncid.conf.template new file mode 100755 index 0000000..43ef490 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/ncid.conf.template @@ -0,0 +1,51 @@ +# tcl/tk configuration file + +# Directory NCID uses to find the helper scripts +set ProgDir /usr/share/ncid + +# default helper script +set EXTPROG ncid-osd + +# Set Host to the NCID server address +# Host defaults to 127.0.0.1 +#set Host 127.0.0.1 +set Host 192.168.1.5 + +# The NCID port default is 3333 +set Port 3333 + +# If the connection to the server is lost, +# try every Delay seconds to reconnect +# The Default: 60 +set Delay 20 + +# If set to 1, display raw data received from the NCID server +# If set to 0, do not display raw data received from the NCID server +# Default: 0 +set Raw 0 + +# If set to 1, output: date time number name +# If set to 0, output: name number +# Default: 0 +set All 1 + +# If set to 1, display formatted CID, and CID log file on connect +# If set to 0, ddo not isplay formatted CID, and CID log file on connect +# Default: 0 +set Verbose 0 + +# If set to 1, display information in terminal progran or external program +# If set to 0, display information using a GUI +# Default: 0 +set NoGUI 1 + +# output name and number to external program +# Default: 0 +set Callprog 1 + +# ring number to call external program +# Default: 0 +set CallOnRing 0 + +# external called program +set Program [list $ProgDir/$EXTPROG] diff --git a/abs/core-testing/LinHES-config/templates/ncidd.conf.template b/abs/core-testing/LinHES-config/templates/ncidd.conf.template new file mode 100644 index 0000000..daa2e79 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/ncidd.conf.template @@ -0,0 +1,143 @@ +# ncid - Network CallerID Server Config File + +################################ +# Definitions and Line formats # +################################ + +# lines can be blank, or start with the words: send, set # +# +# A line is divided into words, separated by spaces +# +# A word is either a string of non-blank characters, everything +# between double quotes, or an equal sign. +# +# SEND LINE FORMAT: +# send DATATYPE [DATATYPE] ... +# where DATATYPE = cidlog, cidinfo +# +# SET LINE FORMAT: +# set ITEM = VALUE [ITEM = VALUE] ... +# where ITEM = cidalias, cidlog, datalog, initcid, initstr, +# lockfile, port, ttyclocal, ttyport, ttyspeed, +# nomodem + +############################ +# Log and Info for Clients # +############################ + +# Send the call log to a client when connected +# The default is not to send the call log file +send cidlog + +# Send call info (LINE and RING) to a client at each ring +# The default is not to send the call info line +send cidinfo + +############################ +# NCID Communications Port # +############################ + +# The default TCP/IP port is 3333 + set port = 3333 + +####################### +# Alias and Log Files # +####################### + +# The default CID alias file: /etc/ncid/ncidd.alias +# set cidalias = /etc/ncid/ncidd.alias + +# The default CID call log file: /var/log/cidcall.log +# the log file must exist, ncidd will not create it +# (also make the change in /etc/logrotate.d/ncidd +# and also /etc/ncid/ncidrotate.conf) +# set cidlog = /var/log/cidcall.log + +# The default tty data log file: /var/log/ciddata.log +# the log file must exist, ncidd will not create it +# (also make the change in /etc/logrotate.d/ncidd +# and also /etc/ncid/ncidrotate.conf) +# set datalog = /var/log/ciddata.log + +##################### +# TTY Configuration # +##################### + +# The default tty port: /dev/modem +# set ttyport = /dev/cu.modem # Macintosh OS X + set ttyport = /dev/ttyS1 + +# The default tty port speed: 19200 +# The tty speed can be one of: 38400, 19200, 9600, 4800 +# set ttyspeed = 4800 # NetCallerID port speed + +# Ignore tty control signals for internal modems and 3 wire serial cables +# Disable tty control signals: ttyclocal = 1 +# Enable tty control signals: ttyclocal = 0 (default) +# set ttyclocal = 1 + +# The lockfile name is generated automatically +# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem +# set lockfile = /var/lock/LCK..ttyS0 + +##################### +# Modem or No Modem # +##################### + +# Obtain CallerID from a CID device or a modem +# device: nomodem = 1 (do not send AT commands) +# modem: nomodem = 0 (default - send AT commands) +# set nomodem = 1 + +######################## +# Modem Initialization # +######################## + +# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" +# set initstr = "ATE1V1Q0" +# +# Alternate modem initialization string +# set initstr = "AT&FE1V1Q0+VIP" + +# Addon strings to set modem for Distinctive Ring: +# http://www.modemsite.com/56k/dring.asp +# +# 3Com/USR/TI chipset: ATS41=1 +# Reported Ring Codes: RING A, RING B, RING C +# Rockwell/Conexant chipset: AT-SDR=7 +# Reported Ring Codes: RING 1, RING 2, RING 3 +# Lucent/Agere chipset: AT+VDR=1,0 +# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 +# +# Example adds 3Com DR to the default modem initialization +# set initstr = "ATE1V1Q0S41=1" + +# The default for ncidd is to try two CID strings to setup +# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". +# set initcid = "AT#CID=1" +# +# Alternate CID strings to try if default does not work: +# set initcid = "AT+FCLASS=8;+VCID=1" +# set initcid = "AT-STE=1;+VCID=1" +# set initcid = "AT-STE=1;#CID=1" + +################# +# TiVo Settings # +################# +# set ttyclocal = 1 # TiVo requires CLOCAL +# set ttyport = /dev/ttyS1 # TiVo Modem Port +# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port +# +# To use a modem on the TiVo serial port +# Tivo (stereo mini jack) -> +# -> (stereo mini plug) TiVo serial cable (9-pin male) -> +# -> (9-pin Female) PC modem cable (25-pin Male -> +# -> (25-pin Female) Modem +# if the modem has switches, disable DTR +# Use this string to set the modem before attaching it to the TiVo: +# AT&F0&D0&B1&W +# +# set ttyport = /dev/ttyS3 # TiVo Serial Port +# +# End TiVo Settings + diff --git a/abs/core-testing/LinHES-config/templates/real_change_chan.sh b/abs/core-testing/LinHES-config/templates/real_change_chan.sh new file mode 100755 index 0000000..efeba88 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/real_change_chan.sh @@ -0,0 +1,19 @@ +#!/bin/sh +REMOTE_NAME=SA3250 +cmd="$1" + +case $cmd in + [0-9]*) + for digit in $(echo $1 | sed -e 's/./& /g'); do + irsend SEND_ONCE $REMOTE_NAME $digit + sleep 0.3 + # If things work OK with sleep 1, try this for faster channel changes: + # sleep 0.3 + done + ;; + + *) + irsend SEND_ONCE $REMOTE_NAME $cmd + ;; + esac + /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf new file mode 100644 index 0000000..e7c1539 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf @@ -0,0 +1,357 @@ + +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004 +# +# contributed by +# +# brand: ATI Remote Wonder +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name wonder + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 147987 + toggle_bit 0 + + + begin codes + A 0x0000000014C500F0 + B 0x0000000014C601F0 + POWER 0x0000000014C702F0 + TV 0x0000000014C803F0 + DVD 0x0000000014C904F0 + WEB 0x0000000014CA05F0 + GUIDE 0x0000000014CB06F0 + GRAB 0x0000000014CC07F0 + VOL_DOWN 0x0000000014CE09F0 + VOL_UP 0x0000000014CD08F0 + MUTE 0x0000000014CF0AF0 + CH_DOWN 0x0000000014D10CF0 + CH_UP 0x0000000014D00BF0 + A 0x0000000014C500F0 + B 0x0000000014C601F0 + 1 0x0000000014D20DF0 + 2 0x0000000014D30EF0 + 3 0x0000000014D40FF0 + 4 0x0000000014D510F0 + 5 0x0000000014D611F0 + 6 0x0000000014D712F0 + 7 0x0000000014D813F0 + 8 0x0000000014D914F0 + 9 0x0000000014DA15F0 + 0 0x0000000014DC17F0 + MENU 0x0000000014DB16F0 + CHECK 0x0000000014DD18F0 + C 0x0000000014DE19F0 + D 0x0000000014E01BF0 + UP 0x0000000014DF1AF0 + LEFT 0x0000000014E21DF0 + DOWN 0x0000000014E722F0 + RIGHT 0x0000000014E41FF0 + OK 0x0000000014E31EF0 + REPLAY 0x0000000014E11CF0 + FULLSCREEN 0x0000000014E520F0 + E 0x0000000014E621F0 + F 0x0000000014E823F0 + REWIND 0x0000000014E924F0 + FORWARD 0x0000000014EB26F0 + PLAY 0x0000000014EA25F0 + RECORD 0x0000000014EC27F0 + STOP 0x0000000014ED28F0 + PAUSE 0x0000000014EE29F0 + end codes + +end remote + + + +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 +# +# contributed by Steffen +# +# brand: ATI Sapphire Remote Bob II USB +# model no. of remote control: 5000024400 +# devices being controlled by this remote: MythTV +# + +begin remote + +name wonder II +bits 16 +eps 30 +aeps 100 + +one 0 0 +zero 0 0 +pre_data_bits 8 +pre_data 0x0 +post_data_bits 16 +post_data 0x0 +gap 299851 +toggle_bit 0 + + +begin codes +aux1 0x023F +aux2 0x023F +aux3 0x023F +aux4 0x023F +mouse_left_btn 0x02A9 +mouse_right_btn 0x02AA +a 0x0278 +b 0x0279 +power 0x020C +dvd 0x0238 +tv 0x0239 +help 0x02BE +pc 0x023F +resize 0x02D5 +hand 0x02D0 +ati 0x028E +vol_up 0x0210 +vol_down 0x0211 +mute 0x020D +ch_up 0x0220 +ch_down 0x0221 +mouse_up 0x013F +mouse_down 0x013F +mouse_left 0x013F +mouse_right 0x013F +1 0x0201 +2 0x0202 +3 0x0203 +4 0x0204 +5 0x0205 +6 0x0206 +7 0x0207 +8 0x0208 +9 0x0209 +0 0x0200 +list 0x0254 +check 0x0282 +info 0x02F9 +timer 0x0296 +arrow_up 0x0258 +arrow_left 0x025A +arrow_right 0x025B +arrow_down 0x0259 +ok 0x025C +c 0x017A +d 0x027B +play 0x022C +e 0x027C +f 0x027D +rewind 0x0229 +rec 0x0237 +stop 0x0231 +pause 0x0230 +ffwd 0x0228 +end codes + +end remote + + +# Please make this file available to others +# by sending it to <lirc at bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004 +# +# contributed by gLaNDix +# +# brand: ATI +# model no. of remote control: 5000023600 +# devices being controlled by this remote: MythTV 0.14 +# +# USB ID: 0bc7:0004 +# + +begin remote + + name REMOTE_WONDER + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227933 + toggle_bit 0 + + + begin codes + A 0x000000000000D500 + B 0x000000000000D601 + C 0x000000000000EE19 + D 0x000000000000F01B + E 0x000000000000F621 + F 0x000000000000F823 + POWER 0x000000000000D702 + TV 0x000000000000D803 + DVD 0x000000000000D904 + WEB 0x000000000000DA05 + BOOK 0x000000000000DB06 + HAND 0x000000000000DC07 + MOUSE_LEFT_BTN 0x0000000000004D78 + MOUSE_LEFTBUTTONUP 0x0000000000004E79 + MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79 + MOUSE_RIGHT_BTN 0x000000000000517C + MOUSE_RIGHTBUTTONUP 0x000000000000527D + MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E + MOUSE_LEFT 0x0000000000004570 + MOUSE_RIGHT 0x0000000000004671 + MOUSE_UP 0x0000000000004772 + MOUSE_DOWN 0x0000000000004873 + MOUSE_UPRIGHT 0x0000000000004A75 + MOUSE_DOWNRIGHT 0x0000000000004B76 + MOUSE_DOWNLEFT 0x0000000000004C77 + MOUSE_UPLEFT 0x0000000000004974 + VOL_UP 0x000000000000DD08 + VOL_DOWN 0x000000000000DE09 + MUTE 0x000000000000DF0A + CH_DOWN 0x000000000000E10C + CH_UP 0x000000000000E00B + 1 0x000000000000E20D + 2 0x000000000000E30E + 3 0x000000000000E40F + 4 0x000000000000E510 + 5 0x000000000000E611 + 6 0x000000000000E712 + 7 0x000000000000E813 + 8 0x000000000000E914 + 9 0x000000000000EA15 + 0 0x000000000000EC17 + DVD_ROOTMENU 0x000000000000EB16 + SETUP 0x000000000000ED18 + ARROW_UP 0x000000000000EF1A + ARROW_RIGHT 0x000000000000F41F + ARROW_DOWN 0x000000000000F722 + ARROW_LEFT 0x000000000000F21D + OK 0x000000000000F31E + MAXAMIZE 0x000000000000F520 + TV_ON_DEMAND 0x000000000000F11C + BACK 0x000000000000F924 + PLAY 0x000000000000FA25 + NEXT 0x000000000000FB26 + RECORD 0x000000000000FC27 + STOP 0x000000000000FD28 + PAUSE 0x000000000000FE29 + end codes + +end remote + + +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 +# +# contributed by Jason Piterak +# +# brand: ati +# This uses the atiusb driver +#=20 +# model no. of remote control: 5000022000 +# +# devices being controlled by this remote: +# MythTV PVR using knopmyth by Cecil and Dale at +# http://mysettopbox.tv +# Key map names are as per ATI's website: +#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html +# Feel free to change them as you see fit :-) +# +# NOTE: There are 16 channels for this remote; this file only +# supports one channel. See the GATOS project for information +# on how to change the channel. Not tested. Unknown channel. +# + +begin remote + + name atiusb + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0xF000 + gap 139891 + toggle_bit 0 + + + begin codes + a 0x000000000000C500 + b 0x000000000000C601 + power 0x000000000000C702 + tv 0x000000000000C803 + dvd 0x000000000000C904 + web 0x000000000000CA05 + media_library 0x000000000000CB06 + drag 0x000000000000CC07 + mouse-button_left 0x0000000000003D78 + mouse-button_right 0x000000000000417C + mouse-up 0x0000000000003772 + mouse-down 0x0000000000003873 + mouse-left 0x0000000000003570 + mouse-right 0x0000000000003671 + mouse-left_up 0x0000000000003974 + mouse-right_up 0x0000000000003A75 + mouse-left_down 0x0000000000003C77 + mouse-right_down 0x0000000000003B76 + vol-up 0x000000000000CD08 + vol-down 0x000000000000CE09 + mute 0x000000000000CF0A + chan-up 0x000000000000D00B + chan-down 0x000000000000D10C + 1 0x000000000000D20D + 2 0x000000000000D30E + 3 0x000000000000D40F + 4 0x000000000000D510 + 5 0x000000000000D611 + 6 0x000000000000D712 + 7 0x000000000000D813 + 8 0x000000000000D914 + 9 0x000000000000DA15 + 0 0x000000000000DC17 + dvd-root_menu 0x000000000000DB16 + launch_setup 0x000000000000DD18 + c 0x000000000000DE19 + d 0x000000000000E01B + tv_on_demand 0x000000000000E11C + max_window 0x000000000000E520 + cursor-up 0x000000000000DF1A + cursor-down 0x000000000000E722 + cursor-left 0x000000000000E21D + cursor-right 0x000000000000E41F + ok 0x000000000000E31E + e 0x000000000000E621 + f 0x000000000000E823 + rewind 0x000000000000E924 + play 0x000000000000EA25 + fast_forward 0x000000000000EB26 + record 0x000000000000EC27 + stop 0x000000000000ED28 + pause 0x000000000000EE29 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt new file mode 100644 index 0000000..80eec07 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt @@ -0,0 +1,922 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the ATI-Wonder Remote +# using lirc_atiusb driver +# + +begin +prog = mythtv +button = a +config = E +repeat = 5 +end + +begin +prog = mythtv +button = A +config = E +repeat = 5 +end + +begin +prog = mythtv +button = b +config = O +repeat = 5 +end + +begin +prog = mythtv +button = B +config = O +repeat = 5 +end + +begin +prog = mythtv +button = B +config = O +repeat = 5 +end + +begin +prog = mythtv +button = stop +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = STOP +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = ffwd +config = Right +repeat = 5 +end + +begin +prog = mythtv +button = FORWARD +config = Right +repeat = 5 +end + +begin +prog = mythtv +button = rewind +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = REWIND +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = pause +config = P +repeat = 5 +end + +begin +prog = mythtv +button = PAUSE +config = P +repeat = 5 +end + +begin +prog = mythtv +button = play +config = P +repeat = 5 +end + +begin +prog = mythtv +button = PLAY +config = P +repeat = 5 +end + +begin +prog = mythtv +button = mute +config = | +repeat = 5 +end + +begin +prog = mythtv +button = MUTE +config = | +repeat = 5 +end + +begin +prog = mythtv +button = vol_down +config = F10 +repeat = 5 +end + +begin +prog = mythtv +button = VOL_DOWN +config = F10 +repeat = 5 +end + +begin +prog = mythtv +button = vol_up +config = F11 +repeat = 5 +end + +begin +prog = mythtv +button = VOL_UP +config = F11 +repeat = 5 +end + +begin +prog = mythtv +button = f +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = F +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = e +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = E +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = ch_up +config = Up +repeat = 5 +end + +begin +prog = mythtv +button = CH_UP +config = Up +repeat = 5 +end + +begin +prog = mythtv +button = ch_down +config = Down +repeat = 5 +end + +begin +prog = mythtv +button = CH_DOWN +config = Down +repeat = 5 +end + +begin +prog = mythtv +button = ok +config = Enter +repeat = 5 +end + +begin +prog = mythtv +button = OK +config = Enter +repeat = 5 +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin +prog = mythtv +button = rec +config = R +repeat = 5 +end + +begin +prog = mythtv +button = RECORD +config = R +repeat = 5 +end + + +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the ATI-Wonder Remote +# using lirc_atiusb driver +# + +begin +#Jumppoint for Program Guide created in Mythweb + prog = mythtv + button = TV + config = ! +end + +begin +#Jumppoint for DVD playback created in Mythweb + prog = mythtv + button = DVD + config = @ +end + +begin + prog = mythtv +#Jumppoint for MythWeater created in Mythweb + button = WEB + config = # +end + +begin + prog = mythtv +#Jumppoint for MythVideo created in Mythweb + button = BOOK + config = $ +end + +begin + prog = mythtv +#Jumppoint for MythWeater created in Mythweb + button = HAND + config = % +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin + prog = mythtv + button = MOUSE_UP + config = Up +end + +begin + prog = mythtv + button = MOUSE_DOWN + config = Down +end + +begin + prog = mythtv + button = MOUSE_LEFT + config = Left +end + +begin + prog = mythtv + button = MOUSE_RIGHT + config = Right +end + +begin + prog = mythtv + button = MOUSE_RIGHT_BTN + config = Esc +end + +begin + prog = mythtv +# Enter button + button = MOUSE_LEFT_BTN + config = Return +end + +begin + prog = mythtv + button = POWER + config = Esc +end + +begin + prog = mythtv +# Enter button + button = OK + config = Return +end + +begin + prog = mythtv + button = ARROW_UP + config = Up +end + +begin + prog = mythtv + button = ARROW_DOWN + config = Down +end + +begin + prog = mythtv + button = ARROW_LEFT + config = Left +end + +begin + prog = mythtv + button = ARROW_RIGHT + config = Right +end + +begin + prog = mythtv + button = D + config = Esc +end + +begin +prog = mythtv +button = CH_UP +config = Up +end + +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +begin + prog = mythtv + button = VOL_DOWN + repeat = 3 + config = F10 +end + +begin + prog = mythtv + button = VOL_UP + repeat = 3 + config = F11 +end + +begin + prog = mythtv + button = MUTE + config = | +end + +begin + prog = mythtv + button = DVD_ROOTMENU + config = M +end + +begin + prog = mythtv +# Enter button + button = SETUP + config = Return +end + + +begin + prog = mythtv + button = A + config = S +end + +begin + prog = mythtv + button = B + config = I +end + +begin + prog = mythtv + button = C + config = T +end + +begin +prog = mythtv +# Change focus for PiP (to change channel in the other window) +button = MAXAMIZE +config = B +end + +begin +prog = mythtv +# Toggle PiP on/off +button = TV_ON_DEMAND +config = V +end + +begin + prog = mythtv + button = BACK + config = < +end + +begin + prog = mythtv + button = NEXT + config = > +end + +begin + prog = mythtv + button = BACK + config = Left +end + + +begin + prog = mythtv + button = NEXT + config = Right +end + +begin +prog = mythtv +button = RECORD +config = R +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = P +end + +begin +prog = mythtv +button = PAUSE +config = P +end + +#Page Up/Down +begin +prog = mythtv +button = E +config = PgUp +end + +begin +prog = mythtv +button = F +config = PgDown +end + +begin +prog = mythtv +button = E +# Use for backwards commercial skip +config = Q +end + +begin +prog = mythtv +button = F +# Use for forward commercial skip +config = Z +end + +#Mplayer + +begin +prog = mplayer +button = PLAY +config = pause +end + +begin +prog = mplayer +button = PAUSE +config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = D +config = quit +end + +begin +prog = mplayer +button = MOUSE_RIGHT_BTN +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = E +repeat = 6 +config = seek -10 +end + +begin +prog = mplayer +button = F +repeat = 6 +config = seek 10 +end + +begin +prog = mplayer +button = BACK +repeat = 6 +config = seek -70 +end + +begin +prog = mplayer +button = NEXT +repeat = 6 +config = seek 70 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 6 +config = volume -1 +end + +begin +prog = mplayer +button = VOL_UP +repeat = 6 +config = volume 1 +end + +#Xine + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = PAUSE +config = PAUSE +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = POWER +config = Quit +end + +begin +prog = xine +button = D +config = quit +end + +begin +prog = xine +button = MOUSE_RIGHT_BTN +config = quit +end + +begin +prog = xine +button = ARROW_UP +repeat = 4 +config = EventUp +end + +begin +prog = xine +button = ARROW_DOWN +repeat = 4 +config = EventDown +end + +begin +prog = xine +button = ARROW_LEFT +repeat = 4 +config = EventLeft +end + +begin +prog = xine +button = ARROW_RIGHT +repeat = 4 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 0 +config = EventSelect +end + +begin +prog = xine +button = MOUSE_UP +repeat = 4 +config = EventUp +end + +begin +prog = xine +button = MOUSE_DOWN +repeat = 4 +config = EventDown +end + +begin +prog = xine +button = MOUSE_LEFT +repeat = 4 +config = EventLeft +end + +begin +prog = xine +button = MOUSE_RIGHT +repeat = 4 +config = EventRight +end + +begin +prog = xine +button = MOUSE_LEFT_BTN +repeat = 0 +config = EventSelect +end + +begin +prog = xine +button = DVD_ROOTMENU +repeat = 0 +config = Menu +end + +#vol down +begin +prog = xine +button = VOL_DOWN +repeat = 1 +config = Volume- +end + +#vol up +begin +prog = xine +button = VOL_UP +repeat = 1 +config = Volume+ +end + +begin +prog = xine +button = TV_ON_DEMAND +repeat = 1 +config = ZoomIn +end + +begin +prog = xine +button = MAXAMIZE +repeat = 1 +config = ZoomOut +end + +#skip chapter forward +begin +prog = xine +button = NEXT +repeat = 1 +config = EventNext +end + +#skip chapter backward +begin +prog = xine +button = BACK +repeat = 1 +config = EventPrior +end + +begin +prog = xine +button = F +repeat = 2 +config = SeekRelative+45 +end + +begin +prog = xine +button = E +repeat = 2 +config = SeekRelative-45 +end + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg Binary files differnew file mode 100644 index 0000000..351a111 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS new file mode 100644 index 0000000..b76d32c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS @@ -0,0 +1,115 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + + +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 +# +# contributed by +# +# brand: RS_LD_120-MX500 +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name RS_LD + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 384 1920 + zero 384 896 + ptrail 384 + gap 70400 + min_repeat 2 + toggle_bit 0 + + + begin codes + RESET 0x19FD + TIME 0X1902 + BLANK 0X1B02 + PICTURE 0X1882 + ASPECT 0X1A82 + BROWSE 0X1982 + DELETE 0X1B82 + CARD 0X1842 + CARD_SOURCE 0X1A42 + SPARE1 0X1942 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc new file mode 100644 index 0000000..5e668b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc @@ -0,0 +1,832 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 4 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +end + +begin +prog = mythtv +button = OK +config = Return +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +end + +begin +prog = mythtv +button = EXIT +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = Space +end + +begin +prog = mythtv +button = PAUSE +config = p +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +end + +begin +prog = mythtv +button = RECORD +config = r +end + +begin +prog = mythtv +# rewind +button = << +config = Home +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = i +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg Binary files differnew file mode 100644 index 0000000..38857f9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf new file mode 100644 index 0000000..b76d32c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf @@ -0,0 +1,115 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + + +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 +# +# contributed by +# +# brand: RS_LD_120-MX500 +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name RS_LD + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 384 1920 + zero 384 896 + ptrail 384 + gap 70400 + min_repeat 2 + toggle_bit 0 + + + begin codes + RESET 0x19FD + TIME 0X1902 + BLANK 0X1B02 + PICTURE 0X1882 + ASPECT 0X1A82 + BROWSE 0X1982 + DELETE 0X1B82 + CARD 0X1842 + CARD_SOURCE 0X1A42 + SPARE1 0X1942 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc new file mode 100755 index 0000000..2663c63 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc @@ -0,0 +1,857 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 5 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +repeat = 5 +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = OK +config = Return +repeat = 5 +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +repeat = 5 +end + +begin +prog = mythtv +button = EXIT +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = PLAY +config = Space +repeat = 5 +end + +begin +prog = mythtv +button = PAUSE +config = p +repeat = 5 +end + +begin +prog = mythtv +button = STOP +config = Esc +repeat = 5 +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +repeat = 5 +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = RECORD +config = r +repeat = 5 +end + +begin +prog = mythtv +# rewind +button = << +config = Home +repeat = 5 +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +repeat = 5 +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = S +repeat = 5 +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg Binary files differnew file mode 100644 index 0000000..e2af610 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf new file mode 100644 index 0000000..f8175f3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf @@ -0,0 +1,87 @@ +# this config file was generated +# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 +# +# contributed by Jarod Wilson <jcw@wilsonet.com> +#------------------------------------------------------------------------------ +# +# filename: RadioShack_15-2116-vcr0081.lirc +# encoding: RC-5 +# brand: RadioShack Universal (and others) +# model: 15-2116, set as VCR type 0081 +# supported devices: all +# +# note: requires quite a bit of key reassignment w/keymover and EFCs... +# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO +# +#------------------------------------------------------------------------------ + +begin remote + + name rs15-2116-vcr0081 + bits 11 + flags RC5|CONST_LENGTH + eps 20 + aeps 0 + header 0 0 + one 889 889 + zero 889 889 + plead 889 + ptrail 0 + foot 0 0 + repeat 0 0 + pre_data_bits 2 + pre_data 0x02 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 113792 + toggle_bit 2 + frequency 36000 + duty_cycle 50 + + begin codes + 0 0x0000000000000140 + 1 0x0000000000000141 + 2 0x0000000000000142 + 3 0x0000000000000143 + 4 0x0000000000000144 + 5 0x0000000000000145 + 6 0x0000000000000146 + 7 0x0000000000000147 + 8 0x0000000000000148 + 9 0x0000000000000149 + INFO 0x000000000000014a + SELECT 0x000000000000014b + POWER 0x000000000000014c + MUTE 0x000000000000014d + MOVE 0x000000000000014e + VOL+ 0x0000000000000150 + VOL- 0x0000000000000151 + RIGHT 0x000000000000015a + LEFT 0x000000000000015b + ENTER 0x000000000000015c + MENU 0x000000000000015d + CH+ 0x0000000000000160 + CH- 0x0000000000000161 + PIP 0x0000000000000162 + SWAP 0x0000000000000163 + SLEEP 0x0000000000000166 + FREEZE 0x0000000000000168 + PAUSE 0x0000000000000169 + SKIP 0x000000000000016a + EXIT 0x0000000000000171 + REW 0x0000000000000172 + REPLAY 0x0000000000000173 + FFWD 0x0000000000000174 + PLAY 0x0000000000000175 + STOP 0x0000000000000176 + REC 0x0000000000000177 + SKIP 0x0000000000000178 + +100 0x0000000000000179 + LAST 0x000000000000017b + GUIDE 0x000000000000017c + TV/VIDEO 0x000000000000017e + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs new file mode 100644 index 0000000..91c0de5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs @@ -0,0 +1,539 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the RadioShack 15-2116, VCR type 0081 +# using Hauppauge IR receiver +# +# By Jarod Wilson, 2003/12/31 +# Amalgamated from Harry O's +# .lircrc, the mythtv.org docs, and +# a few touches of my own. :) +# + +# Channel Up +begin +prog = mythtv +button = CH+ +repeat = 4 +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH- +repeat = 4 +config = Down +end + +# OK/Select +begin +prog = mythtv +button = SELECT +repeat = 4 +config = Return +end + +# Play +begin +prog = mythtv +button = PLAY +repeat = 4 +config = Space +end + +# Stop +begin +prog = mythtv +button = STOP +repeat = 4 +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = EXIT +repeat = 4 +config = Esc +end + +# Power Off/Exit +begin +prog = mythtv +button = POWER +repeat = 4 +config = Esc +end + +# Pause +begin +prog = mythtv +button = PAUSE +repeat = 4 +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +repeat = 4 +config = | +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = REW +repeat = 4 +config = Left +end + +begin +prog = mythtv +button = LEFT +repeat = 4 +config = Left +end + +# Fast forward (30 sec default) +begin +prog = mythtv +button = FFWD +repeat = 4 +config = Right +end + +begin +prog = mythtv +button = RIGHT +repeat = 4 +config = Right +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = FREEZE +repeat = 4 +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = MOVE +repeat = 4 +config = PgUp +end + +# Record +begin +prog = mythtv +button = REC +repeat = 4 +config = R +end + +# OSD browse +begin +prog = mythtv +button = GUIDE +repeat = 4 +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = MENU +repeat = 4 +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = INFO +repeat = 4 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +100 +repeat = 4 +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = SLEEP +repeat = 4 +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = ENTER +repeat = 4 +config = Z +end + +# Change TV card input +begin +prog = mythtv +button = TV/VIDEO +repeat = 4 +config = C +end + +# Toggle Picture-In-Picture +begin +prog = mythtv +button = PIP +repeat = 4 +config = V +end + +# Swap PIP +begin +prog = mythtv +button = SWAP +repeat = 4 +config = N +end + +# Cycle through channel history +begin +prog = mythtv +button = LAST +repeat = 4 +config = H +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +repeat = 4 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 4 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 4 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 4 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 4 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 4 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 4 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 4 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 4 +config = 9 +end + +### MPlayer commands + +begin +prog = mplayer +button = MENU +repeat = 4 +config = osd +end + +begin +prog = mplayer +button = PAUSE +repeat = 4 +config = pause +end + +begin +prog = mplayer +button = PLAY +repeat = 4 +config = seek +1 +end + +begin +prog = mplayer +button = STOP +repeat = 4 +config = quit +end + +begin +prog = mplayer +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = mplayer +button = REW +repeat = 4 +config = seek -10 +end + +begin +prog = mplayer +button = LEFT +repeat = 4 +config = seek -10 +end + +begin +prog = mplayer +button = FFWD +repeat = 4 +config = seek +30 +end + +begin +prog = mplayer +button = RIGHT +repeat = 4 +config = seek +30 +end + +begin +prog = mplayer +button = EXIT +repeat = 4 +config = quit +end + +begin +prog = mplayer +button = FREEZE +repeat = 4 +config = seek +1200 +end + +begin +prog = mplayer +button = MOVE +repeat = 4 +config = seek -1200 +end + +begin +prog = mplayer +button = +100 +repeat = 4 +config = vo_fullscreen +end + +### Xine commands + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = POWER +repeat = 3 +config = Quit +end + +begin +prog = xine +button = EXIT +repeat = 3 +config = Quit +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = CH+ +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = CH- +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = LEFT +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = RIGHT +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = SELECT +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = GUIDE +repeat = 3 +config = Menu +end + +begin +prog = xine +button = FFWD +repeat = 3 +config = SeekRelative+30 +end + +begin +prog = xine +button = REW +repeat = 3 +config = SeekRelative-30 +end + +begin +prog = xine +button = VOL+ +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VOL- +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = FREEZE +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = LAST +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = INFO +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = ENTER +repeat = 3 +config = SpeedFaster +end + +begin +prog = xine +button = SLEEP +repeat = 3 +config = SpeedSlower +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg Binary files differnew file mode 100644 index 0000000..d465839 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 new file mode 100644 index 0000000..3f6c5f0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 @@ -0,0 +1,62 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005 +# +# contributed by +# +# brand: Adaptec +# model no. of remote control: +# devices being controlled by this remote: AVC-2410 capture card +# + +begin remote + + name AVC-2410 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x82F1 + gap 202922 + min_repeat 0 + toggle_bit 0 + + + begin codes + Live 0x00000000000025DA + Timeshift 0x00000000000017E8 + Scan 0x00000000000018e7 + Power 0x00000000000009f6 + 1 0x00000000000026D9 + 2 0x00000000000019E6 + 3 0x00000000000010EF + 4 0x00000000000027D8 + 5 0x00000000000020DF + 6 0x00000000000011EE + 7 0x00000000000028D7 + 8 0x00000000000021DE + 9 0x00000000000012ED + 0 0x00000000000022DD + Mute 0x00000000000013EC + Full 0x00000000000029D6 + Play 0x00000000000030CF + Stop 0x00000000000023DC + Skip 0x00000000000024DB + Replay 0x00000000000014EB + Rewind 0x00000000000031CE + Forward 0x00000000000015EA + Ch+ 0x00000000000001FE + Ch- 0x00000000000005FA + Vol+ 0x00000000000004FB + Vol- 0x00000000000002FD + Enter 0x00000000000003FC + OSD 0x00000000000032CD + cc 0x00000000000016E9 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax new file mode 100644 index 0000000..06a4102 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax @@ -0,0 +1,199 @@ + +# +# This is a space encoded remote control from AnimaX. +# You need at least lirc-0.5.4 to use this config file +# +# contributed by Karsten Scheibler <karsten.scheibler@student.uni-halle.de> +# +# brand: AnimaX +# model: Anir Remote Control +# supported devices: This remote control comes with some TV Tuner cards from +# Hauppauge. +# + +begin remote + + name ANIMAX + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 2500 2500 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_gap 102937 + repeat_bit 0 + + begin codes + CD_DOWN 0x000000000000DB24 + CD_UP 0x0000000000005BA4 + TV_DOWN 0x000000000000DC23 + TV_UP 0x0000000000005CA3 + PHONE_DOWN 0x000000000000DD22 + PHONE_UP 0x0000000000005DA2 + RADIO_DOWN 0x000000000000DE21 + RADIO_UP 0x0000000000005EA1 + VIDEO_DOWN 0x000000000000DF20 + VIDEO_UP 0x0000000000005FA0 + AUX1_DOWN 0x000000000000E01F + AUX1_UP 0x000000000000609F + MAIL_DOWN 0x000000000000E11E + MAIL_UP 0x000000000000619E + AUX2_DOWN 0x000000000000E21D + AUX2_UP 0x000000000000629D + POWER_DOWN 0x000000000000E31C + POWER_UP 0x000000000000639C + LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B + LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B + REWIND_DOWN 0x000000000000E51A + REWIND_UP 0x000000000000659A + PLAY_DOWN 0x000000000000E619 + PLAY_UP 0x0000000000006699 + FORWARD_DOWN 0x000000000000E718 + FORWARD_UP 0x0000000000006798 + SKIP_BACKWARD_DOWN 0x000000000000E817 + SKIP_BACKWARD 0x0000000000006897 + STOP_DOWN 0x000000000000E916 + STOP_UP 0x0000000000006996 + SKIP_FORWARD_DOWN 0x000000000000EA15 + SKIP_FORWARD_UP 0x0000000000006A95 + CHANNEL_UP_DOWN 0x000000000000EB14 + CHANNEL_UP_UP 0x0000000000006B94 + MENU_DOWN 0x000000000000EC13 + MENU_UP 0x0000000000006C93 + VOLUME_UP_DOWN 0x000000000000ED12 + VOLUME_UP_UP 0x0000000000006D92 + BLUE_BUTTON_DOWN 0x000000000000EE11 + BLUE_BUTTON_UP 0x0000000000006E91 + MUTE_DOWN 0x000000000000EF10 + MUTE_UP 0x0000000000006F90 + VOLUME_DOWN_DOWN 0x000000000000F00F + VOLUME_DOWN_UP 0x000000000000708F + RED_BUTTON_DOWN 0x000000000000F10E + RED_BUTTON_UP 0x000000000000718E + GREEN_BUTTON_DOWN 0x000000000000F20D + GREEN_BUTTON_UP 0x000000000000728D + CHANNEL_DOWN_DOWN 0x000000000000F30C + CHANNEL_DOWN_UP 0x000000000000738C + 1_DOWN 0x000000000000F40B + 1_UP 0x000000000000748B + 2_DOWN 0x000000000000F50A + 2_UP 0x000000000000758A + 3_DOWN 0x000000000000F609 + 3_UP 0x0000000000007689 + 4_DOWN 0x000000000000F708 + 4_UP 0x0000000000007788 + 5_DOWN 0x000000000000F807 + 5_UP 0x0000000000007887 + 6_DOWN 0x000000000000F906 + 6_UP 0x0000000000007986 + 7_DOWN 0x000000000000FA05 + 7_UP 0x0000000000007A85 + 8_DOWN 0x000000000000FB04 + 8_UP 0x0000000000007B84 + 9_DOWN 0x000000000000FC03 + 9_UP 0x0000000000007C83 + SLASH_DOWN 0x000000000000FD02 + SLASH_UP 0x0000000000007D82 + 0_DOWN 0x000000000000FE01 + 0_UP 0x0000000000007E81 + MINUS_DOWN 0x000000000000FF00 + MINUS_UP 0x0000000000007F80 + end codes + +end remote + + +begin remote + + name ANIMAX_MOUSE_BUTTONS + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 0 0 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_bit 0 + + begin codes + RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639 + RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9 + LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31 + LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1 + end codes + +end remote + + +begin remote + + name ANIMAX_MOUSE_PAD + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 2500 2500 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_gap 8437 + repeat_bit 0 + + begin codes + MOUSE_NNW 0x000000000000906F + MOUSE_NW 0x000000000000D02F + MOUSE_NWW 0x000000000000916E + MOUSE_W 0x000000000000D12E + MOUSE_SWW 0x000000000000926D + MOUSE_SW 0x000000000000D22D + MOUSE_SSW 0x000000000000936C + MOUSE_S 0x000000000000D32C + MOUSE_SSE 0x000000000000946B + MOUSE_SE 0x000000000000D42B + MOUSE_SEE 0x000000000000956A + MOUSE_E 0x000000000000D52A + MOUSE_NEE 0x0000000000009669 + MOUSE_NE 0x000000000000D629 + MOUSE_NNE 0x0000000000009768 + MOUSE_N 0x000000000000D728 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax new file mode 100644 index 0000000..09a2341 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax @@ -0,0 +1,71 @@ +# +# lircmd config file for the animax remote control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_N +MOVE_N ANIMAX_MOUSE_PAD MOUSE_N + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE + +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_E +MOVE_E ANIMAX_MOUSE_PAD MOUSE_E + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE + +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_S +MOVE_S ANIMAX_MOUSE_PAD MOUSE_S + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW + +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_W +MOVE_W ANIMAX_MOUSE_PAD MOUSE_W + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW + +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW + + + +BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN + +BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN +BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN + +BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP +BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus new file mode 100644 index 0000000..ceadbf0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus @@ -0,0 +1,56 @@ +# +# contributed by Tibor Sipos <tibors@moravia-it.com> and +# Stefan Jahn <stefan@lkcc.org> +# +# brand: Asus +# model: Asus TV-Box Remote Control +# + +begin remote + + name Asus TV-Box IR + + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 1399999 + toggle_bit 0 + + begin codes + 0 0x0000000000000000 + 1 0x0000000000000008 + 2 0x0000000000000010 + 3 0x0000000000000018 + 4 0x0000000000000020 + 5 0x0000000000000028 + 6 0x0000000000000030 + 7 0x0000000000000038 + 8 0x0000000000000040 + 9 0x0000000000000048 + PREV 0x0000000000000050 + ENTER 0x0000000000000058 + CH+ 0x0000000000000060 + CH- 0x0000000000000068 + VOL+ 0x0000000000000070 + VOL- 0x0000000000000078 + MAXIMIZE 0x0000000000000080 + MUTE 0x0000000000000088 + POWER 0x0000000000000090 + MENU 0x0000000000000098 + UP 0x00000000000000A0 + DOWN 0x00000000000000A8 + LEFT 0x00000000000000B0 + RIGHT 0x00000000000000B8 + CAPTION 0x00000000000000C0 + MTS/SAP 0x00000000000000C8 + DISPLAY 0x00000000000000D0 + SCAN 0x00000000000000D8 + RED 0x00000000000000E0 + GREEN 0x00000000000000E8 + YELLOW 0x00000000000000F0 + BLUE 0x00000000000000F8 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix new file mode 100644 index 0000000..a6e9abd --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix @@ -0,0 +1,152 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004 +# +# contributed by +# +# brand: ASUS +# model no. of remote control: DigiMatrix +# devices being controlled by this remote: +# + +begin remote + + name ASUS_DigiMatrix + bits 16 + flags SPACE_ENC + eps 30 + aeps 100 + + header 8057 4071 + one 479 1534 + zero 479 531 + ptrail 491 + pre_data_bits 8 + pre_data 0x35 + gap 25647 + toggle_bit 0 + + + begin codes + up 0x000000000000E817 + down 0x00000000000018E7 + enter 0x000000000000D02F + left 0x0000000000009867 + right 0x00000000000058A7 + 1 0x00000000000000FF + 2 0x000000000000807F + 3 0x00000000000040BF + 4 0x000000000000C03F + 5 0x00000000000020DF + 6 0x000000000000A05F + 7 0x000000000000609F + 8 0x000000000000E01F + 9 0x00000000000010EF + 0 0x000000000000906F + on_off 0x000000000000B04F + dvd_vcd 0x000000000000F00F + tv 0x00000000000008F7 + os_start 0x00000000000030CF + photo 0x00000000000048B7 + home 0x00000000000044BB + back 0x000000000000A857 + ch+ 0x000000000000B847 + stop 0x000000000000946B + play 0x000000000000C43B + vol+ 0x000000000000F807 + ch- 0x0000000000007887 + step- 0x000000000000E41B + step+ 0x000000000000649B + vol- 0x00000000000004FB + pause 0x00000000000024DB + pre 0x00000000000014EB + next 0x000000000000A45B + mute 0x000000000000847B + rec 0x000000000000D42B + subtitle 0x000000000000C837 + menu 0x00000000000038C7 + dvd_audio 0x00000000000050AF + ui_size 0x0000000000008877 + ui_on_off 0x00000000000028D7 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005 +# +# contributed by +# +# brand: ASUS +# model no. of remote control: DigiMatrix Mark 2 +# devices being controlled by this remote: +# + +begin remote + + name ASUS_DigiMatrixMk2 + bits 8 + flags SPACE_ENC + eps 30 + aeps 100 + + header 2666 1378 + one 260 741 + zero 260 279 + ptrail 251 + pre_data_bits 1 + pre_data 0x0 + post_data_bits 8 + post_data 0x3 + gap 10826 + min_repeat 1 + toggle_bit 0 + + + begin codes + power 0x0000000000000084 + tv_dvr 0x0000000000000044 + fm 0x00000000000000C4 + os_start 0x0000000000000024 + music 0x00000000000000A4 + pictures 0x0000000000000064 + video 0x00000000000000E4 + dvd_menu 0x0000000000000014 + up 0x000000000000004C + down 0x00000000000000E0 + left 0x0000000000000010 + right 0x0000000000000040 + back 0x00000000000000B4 + ok 0x0000000000000088 + back_fwd 0x0000000000000074 + rew 0x0000000000000094 + play_pause 0x0000000000000054 + fwd 0x00000000000000D4 + step- 0x0000000000000098 + stop 0x0000000000000048 + step+ 0x0000000000000090 + vol+ 0x0000000000000058 + vol- 0x00000000000000D8 + home 0x00000000000000C8 + ch+ 0x0000000000000050 + ch- 0x00000000000000D0 + mute 0x0000000000000038 + rec 0x0000000000000028 + pc 0x0000000000000030 + 1 0x00000000000000B8 + 2 0x00000000000000A8 + 3 0x00000000000000B0 + 4 0x0000000000000078 + 5 0x0000000000000068 + 6 0x0000000000000070 + 7 0x00000000000000F8 + 8 0x00000000000000E8 + 9 0x00000000000000F0 + 0 0x0000000000000018 + ui_size 0x0000000000000004 + repeat 0x0000000000000008 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb new file mode 100644 index 0000000..4953bf2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb @@ -0,0 +1,1259 @@ +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 +# +# contributed by Paul Miller <pmiller9@users.sourceforge.net> +# +# brand: ATI Remote Wonder +# model no. of remote control: 5000015900A +# devices being controlled by this remote: ATI USB Receiver +# +# CHANNEL CODES +# To change your channel, hold the hand button down until the +# LED begins to blink. Then enter the channel number +# (1 through 16) and press the hand again. +# +# NOTE!! The lirc_atiusb driver now removes the channel code +# from key-codes (by default). This effectively outputs codes +# for remote channel 1. You can change this behavior by +# loading the module with unique=1. Type `modinfo lirc_atiusb` +# for details. + +begin remote + + name ATIUSB_5000015900A + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 139944 + toggle_bit 0 + + + begin codes + A 0x000000000000F500 + B 0x000000000000F601 + C 0x0000000000000E19 + D 0x000000000000101B + E 0x0000000000001621 + F 0x0000000000001823 + TV 0x000000000000F803 + DVD 0x000000000000F904 + WEB 0x000000000000FA05 + BOOK 0x000000000000FB06 + HAND 0x000000000000FC07 + POWER 0x000000000000F702 + MOUSE_LEFT_BTN 0x0000000000006D78 + MOUSE_RIGHT_BTN 0x000000000000717C + MOUSE_UP 0x0000000000006772 + MOUSE_DOWN 0x0000000000006B76 + MOUSE_LEFT 0x0000000000006C77 + MOUSE_RIGHT 0x0000000000006B76 + VOL_UP 0x000000000000FD08 + VOL_DOWN 0x000000000000FE09 + MUTE 0x000000000000FF0A + CH_UP 0x000000000000000B + CH_DOWN 0x000000000000010C + 1 0x000000000000020D + 2 0x000000000000030E + 3 0x000000000000040F + 4 0x0000000000000510 + 5 0x0000000000000611 + 6 0x0000000000000712 + 7 0x0000000000000813 + 8 0x0000000000000914 + 9 0x0000000000000A15 + 0 0x0000000000000C17 + LIST 0x0000000000000B16 + CHECK 0x0000000000000D18 + UP 0x0000000000000F1A + DOWN 0x0000000000001722 + LEFT 0x000000000000121D + RIGHT 0x000000000000141F + OK 0x000000000000131E + TIMER 0x000000000000111C + MAX 0x0000000000001520 + REWIND 0x0000000000001924 + PLAY 0x0000000000001A25 + FFWD 0x0000000000001B26 + REC 0x0000000000001C27 + STOP 0x0000000000001D28 + PAUSE 0x0000000000001E29 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 +# +# contributed by Jason Piterak +# +# brand: ATI +# model no. of remote control: 5000022000 +# +# devices being controlled by this remote: +# MythTV PVR using knopmyth by Cecil and Dale at +# http://mysettopbox.tv +# Key map names are as per ATI's website: +# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html +# Feel free to change them as you see fit :-) +# +# NOTE: There are 16 channels for this remote; this file only +# supports one channel. See the GATOS project for information +# on how to change the channel. Not tested. Unknown channel. +# +# also reported by Jeffrey Barnhill to work with model 5000023600 while +# the dedicated section below did not work + +begin remote + + name ATIUSB_5000022000 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0000 + gap 139891 + toggle_bit 0 + + + begin codes + a 0x000000000000C500 + b 0x000000000000C601 + power 0x000000000000C702 + tv 0x000000000000C803 + dvd 0x000000000000C904 + web 0x000000000000CA05 + media_library 0x000000000000CB06 + drag 0x000000000000CC07 + mouse-button_left 0x0000000000003D78 + mouse-button_right 0x000000000000417C + mouse-up 0x0000000000003772 + mouse-down 0x0000000000003873 + mouse-left 0x0000000000003570 + mouse-right 0x0000000000003671 + mouse-left_up 0x0000000000003974 + mouse-right_up 0x0000000000003A75 + mouse-left_down 0x0000000000003C77 + mouse-right_down 0x0000000000003B76 + vol-up 0x000000000000CD08 + vol-down 0x000000000000CE09 + mute 0x000000000000CF0A + chan-up 0x000000000000D00B + chan-down 0x000000000000D10C + 1 0x000000000000D20D + 2 0x000000000000D30E + 3 0x000000000000D40F + 4 0x000000000000D510 + 5 0x000000000000D611 + 6 0x000000000000D712 + 7 0x000000000000D813 + 8 0x000000000000D914 + 9 0x000000000000DA15 + 0 0x000000000000DC17 + dvd-root_menu 0x000000000000DB16 + launch_setup 0x000000000000DD18 + c 0x000000000000DE19 + d 0x000000000000E01B + tv_on_demand 0x000000000000E11C + max_window 0x000000000000E520 + cursor-up 0x000000000000DF1A + cursor-down 0x000000000000E722 + cursor-left 0x000000000000E21D + cursor-right 0x000000000000E41F + ok 0x000000000000E31E + e 0x000000000000E621 + f 0x000000000000E823 + rewind 0x000000000000E924 + play 0x000000000000EA25 + fast_forward 0x000000000000EB26 + record 0x000000000000EC27 + stop 0x000000000000ED28 + pause 0x000000000000EE29 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 +# +# contributed by Jurgen Kramer +# +# brand: ATI +# model no. of remote control: 5000023600 +# devices being controlled by this remote: MythTV 0.14 +# +# USB ID: 0bc7:0004 +# + +begin remote + + name ATIUSB_5000023600 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227972 + min_repeat 4 + toggle_bit 0 + + + begin codes + 1 0x000000000000920D + 2 0x000000000000930E + 3 0x000000000000940F + 4 0x0000000000009510 + 5 0x0000000000009611 + 6 0x0000000000009712 + 7 0x0000000000009813 + 8 0x0000000000009914 + 9 0x0000000000009A15 + a 0x0000000000008500 + b 0x0000000000008601 + power 0x0000000000008702 + tv 0x0000000000008803 + dvd 0x0000000000008904 + web 0x0000000000008A05 + media_library 0x0000000000008B06 + drag 0x0000000000008C07 + 0 0x0000000000009C17 + c 0x0000000000009E19 + d 0x000000000000A01B + mute 0x0000000000008F0A + tv_on_demand 0x000000000000A11C + max_window 0x000000000000A520 + e 0x000000000000A621 + f 0x000000000000A823 + ok 0x000000000000A31E + left 0x000000000000A21D + right 0x000000000000A41F + up 0x0000000000009F1A + down 0x000000000000A722 + rewind 0x000000000000A924 + play 0x000000000000AA25 + forward 0x000000000000AB26 + record 0x000000000000AC27 + stop 0x000000000000AD28 + pause 0x000000000000AE29 + mouse_button_left 0x000000000000FD78 + mouse_button_right 0x000000000000017C + vol-down 0x0000000000008E09 + vol-up 0x0000000000008D08 + chan-down 0x000000000000910C + chan-up 0x000000000000900B + mouse-up 0x000000000000F772 + mouse-down 0x000000000000F873 + mouse-left 0x000000000000F570 + mouse-right 0x000000000000F671 + mouse-left_up 0x000000000000F974 + mouse-left_down 0x000000000000FC77 + mouse-right_up 0x000000000000FA75 + mouse-right_down 0x000000000000FB76 + dvd-root_menu 0x0000000000009B16 + launch_setup 0x0000000000009D18 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 +# +# contributed by Raphaël Doursenaud (rdoursenaud@free.fr) +# +# brand: Sapphire (ATI) +# model no. of remote control: 5000023600 +# devices being controlled by this remote: xmms, tvtime +# + +begin remote + + name SAPPHIRE_ATIUSB_5000023600 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 227990 + toggle_bit 0 + + + begin codes + 1 0x00000014E20D0000 + 2 0x00000014E30E0000 + 3 0x00000014E40F0000 + 4 0x00000014E5100000 + 5 0x00000014E6110000 + 6 0x00000014E7120000 + 7 0x00000014E8130000 + 8 0x00000014E9140000 + 9 0x00000014EA150000 + a 0x00000014D5000000 + b 0x00000014D6010000 + power 0x00000014D7020000 + tv 0x00000014D8030000 + dvd 0x00000014D9040000 + web 0x00000014DA050000 + media_library 0x00000014DB060000 + drag 0x00000014DC070000 + 0 0x00000014EC170000 + c 0x00000014EE190000 + d 0x00000014F01B0000 + mute 0x00000014DF0A0000 + tv_on_demand 0x00000014F11C0000 + max_window 0x00000014F5200000 + e 0x00000014F6210000 + f 0x00000014F8230000 + ok 0x00000014F31E0000 + left 0x00000014F21D0000 + right 0x00000014F41F0000 + up 0x00000014EF1A0000 + down 0x00000014F7220000 + rewind 0x00000014F9240000 + play 0x00000014FA250000 + forward 0x00000014FB260000 + record 0x00000014FC270000 + stop 0x00000014FD280000 + pause 0x00000014FE290000 + mouse_button_left 0x000000144D780000 + mouse_button_right 0x00000014517C0000 + vol-down 0x00000014DE090000 + vol-up 0x00000014DD080000 + chan-down 0x00000014E10C0000 + chan-up 0x00000014E00B0000 + mouse-up 0x0000001447720000 + mouse-down 0x0000001448730000 + mouse-left 0x0000001445700000 + mouse-right 0x0000001446710000 + mouse-left_up 0x0000001449740000 + mouse-left_down 0x000000144C770000 + mouse-right_up 0x000000144A750000 + mouse-right_down 0x000000144B760000 + dvd-root_menu 0x00000014EB160000 + launch_setup 0x00000014ED180000 + end codes + +end remote + + +# lircd.conf for X-10 Lola remote +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 +# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc +# +# +# brand: X-10 Lola +# model no. of remote control: UR89A +# devices being controlled by this remote: mythtv +# + +begin remote + + name X-10_Lola + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 219972 + toggle_bit 0 + + + begin codes + up 0x000000000000600B + down 0x000000000000610C + left 0x0000000000005D08 + right 0x0000000000005E09 + M 0x0000000000005F0A + 1 0x000000000000620D + 2 0x000000000000630E + 3 0x000000000000640F + 4 0x0000000000006510 + 5 0x0000000000006611 + 6 0x0000000000006712 + 7 0x0000000000006813 + 8 0x0000000000006914 + 9 0x0000000000006A15 + 0 0x0000000000006C17 + a-d 0x0000000000006B16 + a-b 0x0000000000006D18 + pageup 0x000000000000711C + pagedown 0x0000000000007520 + T 0x000000000000832E + E 0x000000000000842F + F 0x0000000000005C07 + S 0x0000000000008530 + scan- 0x000000000000802B + rew 0x0000000000007924 + play 0x0000000000007A25 + ff 0x0000000000007B26 + scan+ 0x0000000000007F2A + rec 0x0000000000007C27 + stop 0x0000000000007D28 + pause 0x0000000000007E29 + playlist 0x0000000000005601 + playing 0x000000000000822D + enter 0x000000000000731E + eu 0x0000000000006F1A + ed 0x0000000000007722 + el 0x000000000000721D + er 0x000000000000741F + alb 0x0000000000006E19 + art 0x000000000000701B + gen 0x0000000000007621 + trk 0x0000000000007823 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 +# +# contributed by Julien Damon +# +# brand: microapp6in1 +# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 +# distributed in France +# model no. of remote control: 4184(UR86E) +# devices being controlled by this remote: + +# +# sold by Pearl as Q-Sonic Master Remote 6in1 PC +# + +begin remote + + name microapp6in1 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 203993 + toggle_bit 0 + + + begin codes + num_1 0x00000020EE11820D + num_2 0x00000020EE11420D + num_3 0x00000020EE11C20D + num_4 0x00000020EE11220D + num_5 0x00000020EE11A20D + num_6 0x00000020EE11620D + num_7 0x00000020EE11E20D + num_8 0x00000020EE11120D + num_9 0x00000020EE11920D + num_0 0x00000020EE11020D + AV 0x00000020EE11BA05 + ok 0x00000020EE11520D + up 0x00000020EE11D50A + left 0x00000020EE11D20D + right 0x00000020EE11D10E + down 0x00000020EE11D30C + exit 0x00000020EE11C906 + menu 0x00000020EE11B609 + mute 0x00000020EE11A00F + vol+ 0x00000020EE11600F + vol- 0x00000020EE11E00F + ch+ 0x00000020EE11400F + ch- 0x00000020EE11C00F + hand 0x00000014307B0000 + skip_left 0x00000020EE113A05 + skip_right 0x00000020EE11D807 + play 0x00000020EE11B00F + backward 0x00000020EE113807 + forward 0x00000020EE11B807 + pause 0x00000020EE11720D + stop 0x00000020EE11FF00 + record 0x00000020EE11700F + clic_left 0x000000142D780000 + clic_right 0x00000014317C0000 + mouse_up 0x0000001427720000 + mouse_down 0x0000001428730000 + mouse_right 0x0000001426710000 + mouse_left 0x0000001425700000 + mouse_up_right 0x000000142A750000 + mouse_down_right 0x000000142B760000 + mouse_up_left 0x0000001429740000 + mouse_down_left 0x000000142C770000 + power 0x00000020EE11F00F +# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC + leftbtn_up 0x000000142e790000 + rightbtn_up 0x00000014327d0000 + pc 0x00000020ee11d40b + + end codes + +end remote + + +# this config file was automatically generated +# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 +# +# contributed by Martin Tomasek <mtd@centrum.cz> +# +# brand: ATI Remote Wonder +# model no. of remote control: +# devices being controlled by this remote: ATI USB Receiver (X10). +# +# * remote is set to channel 1, driver reports channel 16. don't know +# which is true. + +# +# P: Vendor=0bc7 ProdID=0004 Rev= 1.00 +# S: Manufacturer=X10 Wireless Technology Inc +# S: Product=USB Receiver +# + +begin remote + + name atiusb_ch1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227933 + toggle_bit 0 + + + begin codes + A 0x000000000000D500 + B 0x000000000000D601 + C 0x000000000000EE19 + D 0x000000000000F01B + E 0x000000000000F621 + F 0x000000000000F823 + POWER 0x000000000000D702 + TV 0x000000000000D803 + DVD 0x000000000000D904 + WEB 0x000000000000DA05 + BOOK 0x000000000000DB06 + HAND 0x000000000000DC07 + MOUSE_LEFT_BTN 0x0000000000004D78 + MOUSE_RIGHT_BTN 0x000000000000517C + MOUSE_LEFT 0x0000000000004570 + MOUSE_RIGHT 0x0000000000004671 + MOUSE_UP 0x0000000000004772 + MOUSE_DOWN 0x0000000000004873 + VOL_UP 0x000000000000DD08 + VOL_DOWN 0x000000000000DE09 + MUTE 0x000000000000DF0A + CH_UP 0x000000000000E00B + CH_DOWN 0x000000000000E10C + 1 0x000000000000E20D + 2 0x000000000000E30E + 3 0x000000000000E40F + 4 0x000000000000E510 + 5 0x000000000000E611 + 6 0x000000000000E712 + 7 0x000000000000E813 + 8 0x000000000000E914 + 9 0x000000000000EA15 + 0 0x000000000000EC17 + LIST 0x000000000000EB16 + CHECK 0x000000000000ED18 + UP 0x000000000000EF1A + DOWN 0x000000000000F722 + LEFT 0x000000000000F21D + RIGHT 0x000000000000F41F + OK 0x000000000000F31E + TIMER 0x000000000000F11C + MAXIMIZE 0x000000000000F520 + REW 0x000000000000F924 + FFWD 0x000000000000FB26 + PLAY 0x000000000000FA25 + STOP 0x000000000000FD28 + RECORD 0x000000000000FC27 + PAUSE 0x000000000000FE29 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 +# +# contributed by Phil Speights +# +# brand: nvidia +# model no. of remote control: UR88A +# devices being controlled by this remote: nvidia personal cinema +# + +begin remote + + name ATIUSB_UR88A + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 243948 + toggle_bit 0 + + + begin codes + mouse-up 0x4A75 + mouse-right_up 0x4A75 + mouse-right 0x4671 + mouse-right_down 0x4B76 + mouse-down 0x4B76 + mouse-left_down 0x4873 + mouse-left 0x4C77 + mouse-left_up 0x4772 + esc 0xDF0A + mouse-button_left 0x4D78 + mouse-button_right 0x517C + 1 0xE20D + 2 0xE30E + 3 0xE40F + 4 0xE510 + 5 0xE611 + 6 0xE712 + 7 0xE813 + 8 0xE914 + 9 0xEA15 + 0 0xEC17 + stop 0xFD28 + play 0xFA25 + fastfoward 0xFB26 + rewind 0xF924 + pause 0xFE29 + record 0xFC27 + previous 0xF621 + next 0xF823 + up 0xEF1A + down 0xF722 + right 0xF41F + left 0xF21D + web 0xDC07 + music 0xDB06 + photo 0xDA05 + dvd/vcd 0xD904 + dvr 0xD803 + mute 0xD500 + playlist 0xD601 + chsurf 0xD702 + dvdmenu 0xEE19 + txt 0xEB16 + snapshots 0xED18 + setup 0xF01B + audio 0xF11C + slow 0xF520 + ok 0xF31E + vol+ 0xDE09 + vol- 0xDD08 + chan- 0xE10C + chan+ 0xE00B + zoom 0xFF2A + angle 0x002B + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 +# +# contributed by Dirk Aust +# +# brand: Medion, Made by X10, China +# Remote P/N: 20016398 +# Receiver P/N: 20016397 +# +# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC + +begin remote + + name Medion + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 139873 + toggle_bit 0 + + + begin codes + TV 0x012C + VCR 0x022D + DVD 0xD904 + MUSIC 0xDB06 + RADIO 0x032E + PHOTO 0xDA05 + TV_PREVIEW 0x042F + CHANNEL_LIST 0x0530 + SETUP 0xF01B + VIDEO_DESKTOP 0x0631 + CHAN+ 0xE00B + VOL- 0xDD08 + MUTE 0xD500 + VOL+ 0xDE09 + CHAN- 0xE10C + RED 0x0732 + GREEN 0x0833 + YELLOW 0x0934 + BLUE 0x0A35 + TXT 0xEB16 + 1 0xE20D + 2 0xE30E + 3 0xE40F + 4 0xE510 + 5 0xE611 + 6 0xE712 + 7 0xE813 + 8 0xE914 + 9 0xEA15 + TV/RADIO 0xF11C + 0 0xEC17 + DELETE 0xF520 + RENAME 0x0B36 + SNAPSHOT 0xED18 + UP 0xEF1A + LEFT 0xF21D + OK 0xF31E + RIGHT 0xF41F + DOWN 0xF722 + ACQ_IMAGE 0x0C37 + EDIT_IMAGE 0x0D38 + REW 0xF924 + PLAY 0xFA25 + FFW 0xFB26 + RECORD 0xFC27 + STOP 0xFD28 + PAUSE 0xFE29 + PREV 0xF621 + FULL 0x0E39 + NEXT 0xF823 + DVD_MENU 0xEE19 + DVD_AUDIO 0x0F3A + POWER 0xD702 + end codes + +end remote + + +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 +# +# contributed by Steffen <starv-lirc@juniks.org> +# +# brand: ATI Sapphire Remote Bob II USB +# model no. of remote control: 5000024400 +# devices being controlled by this remote: ASUS Digimatrix MythTV PVR +# + +begin remote + + name 5000024400 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x0 + post_data_bits 16 + post_data 0x0 + gap 299851 + toggle_bit 0 + + + begin codes + aux1 0x023F + aux2 0x023F + aux3 0x023F + aux4 0x023F + leftmouse 0x02A9 + rightmouse 0x02AA + a 0x0278 + b 0x0279 + power 0x020C + dvd 0x0238 + tv 0x0239 + help 0x02BE + pc 0x023F + resize 0x02D5 + hand 0x02D0 + ati 0x028E + vol-up 0x0210 + vol-down 0x0211 + mute 0x020D + chan-up 0x0220 + chan-down 0x0221 + mouse-up 0x013F + mouse-down 0x013F + mouse-left 0x013F + mouse-right 0x013F + 1 0x0201 + 2 0x0202 + 3 0x0203 + 4 0x0204 + 5 0x0205 + 6 0x0206 + 7 0x0207 + 8 0x0208 + 9 0x0209 + 0 0x0200 + list 0x0254 + check 0x0282 + info 0x02F9 + timer 0x0296 + up 0x0258 + left 0x025A + right 0x025B + down 0x0259 + ok 0x025C + c 0x017A + d 0x027B + play 0x022C + e 0x027C + f 0x027D + rewind 0x0229 + rec 0x0237 + stop 0x0231 + pause 0x0230 + ffwd 0x0228 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 +# +# contributed by +# +# brand: Niveus +# model no. of remote control: +# devices being controlled by this remote: Niveus X10 +# + +begin remote + + name Niveus_X10 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 203974 + toggle_bit 0 + + + begin codes + power 0x00000020EE11F00F + mouse-up 0x0000001447720000 + mouse-down 0x0000001448730000 + mouse-left 0x0000001445700000 + mouse-right 0x0000001446710000 + mouse-up-left 0x0000001449740000 + mouse-up-right 0x000000144A750000 + mouse-down-left 0x000000144C770000 + mouse-down-right 0x000000144B760000 + mouse-left-click 0x000000144D780000 + mouse-right-click 0x00000014517C0000 + mouse-drag 0x00000014507B0000 + vol- 0x00000020EE01E00F + vol+ 0x00000020EE81600F + ch- 0x00000020EEE1C00F + ch+ 0x00000020EE61400F + mute 0x00000020EEC1A00F + 1 0x00000020EEA1820D + 2 0x00000020EE61420D + 3 0x00000020EEE1C20D + 4 0x00000020EE41220D + 5 0x00000020EEC1A20D + 6 0x00000020EE81620D + 7 0x00000020EE01E20D + 8 0x00000020EE31120D + 9 0x00000020EEB1920D + ent 0x00000020EE71520D + 0 0x00000020EE21020D + a-b 0x00000020EED1BA05 + a 0x00000020EE513A05 + b 0x00000020EEF1D807 + c 0x00000020EEF1D609 + d 0x00000020EEF1D906 + menu 0x00000020EED1B609 + exit 0x00000020EEE1C906 + up 0x00000020EEF1D50A + down 0x00000020EEF1D30C + left 0x00000020EEF1D20D + right 0x00000020EEF1D10E + ok 0x00000020EE71520D + rew 0x00000020EE513807 + play 0x00000020EED1B00F + ff 0x00000020EED1B807 + rec 0x00000020EE11FF00 + stop 0x00000020EE91700F + pause 0x00000020EE91720D + end codes + +end remote +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005 +# +# contributed by +# +# brand: Medion +# model no. of remote control: MD1 NBC remote +# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb +# + +begin remote + + name Medion_MD1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 219994 + min_repeat 27 + toggle_bit 0 + + + begin codes + Power 0x000000000000D702 + TV 0x000000000000012C + Video 0x00000000000082AD + CD/DVD 0x000000000000D904 + Teletext 0x0000000000006B96 + Audio 0x000000000000DB06 + Radio 0x00000000000083AE + Page 0x0000000000000631 + Photo 0x0000000000005A85 + Info 0x000000000000042F + Menu 0x0000000000006E99 + Back 0x000000000000F520 + Wheel_Up 0x000000000000CDF8 + Wheel_Down 0x000000000000C7F2 + Wheel_Left 0x000000000000F21D + Wheel_Right 0x000000000000749F + Wheel_Click 0x000000000000F31E + Vol+ 0x000000000000DE09 + Vol- 0x0000000000005D88 + Mute 0x000000000000D500 + Program+ 0x000000000000608B + Program- 0x000000000000E10C + Prog_Switch 0x000000000000719C + Select 0x000000000000F01B + Red 0x00000000000087B2 + Green 0x0000000000000833 + Yellow 0x00000000000089B4 + Blue 0x0000000000000A35 + Stop 0x0000000000007DA8 + Pause 0x000000000000FE29 + Play 0x0000000000007AA5 + Skip_Left 0x000000000000F621 + Camera 0x0000000000006D98 + Skip_Right 0x000000000000F823 + Fast_Reverse 0x00000000000079A4 + Fast_Forward 0x000000000000FB26 + 1 0x000000000000628D + 2 0x000000000000E30E + 3 0x000000000000648F + 4 0x000000000000E510 + 5 0x0000000000006691 + 6 0x000000000000E712 + 7 0x0000000000006893 + 8 0x000000000000E914 + 9 0x0000000000006A95 + 0 0x000000000000EC17 + Record 0x000000000000FC27 + end codes + +end remote + + + +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 +# +# contributed by a_matteur +# +# brand: MEDION X10 RF +# model no. of remote control: remote P/N:20014752, receiver P/N:20014751 +# devices being controlled by this remote: +# + +begin remote + + name MEDION_X10_RF + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 235923 + toggle_bit 0 + + + begin codes + tv 0x012C + vcr 0x022D + dvd 0x0904 + music 0x0B06 + radio 0x032E + photo 0x0A05 + tvpreview 0x042F + channellist 0x0530 + setup 0x001B + videodesktop 0x0631 + ch+ 0x000B + ch- 0x010C + vol+ 0x0E09 + vol- 0x0D08 + mute 0x0500 + red 0x0732 + green 0x0833 + yellow 0x0934 + blue 0x0A35 + txt 0x0B16 + 0 0x0C17 + 1 0x020D + 2 0x030E + 3 0x040F + 4 0x0510 + 5 0x0611 + 6 0x0712 + 7 0x0813 + 8 0x0914 + 9 0x0A15 + tvradio 0x011C + delete 0x0520 + rename 0x0B36 + snapshot 0x0D18 + up 0x0F1A + down 0x0722 + left 0x021D + right 0x041F + ok 0x031E + acquireimage 0x0C37 + editimage 0x0D38 + play 0x0A25 + pause 0x0E29 + stop 0x0D28 + forward 0x0B26 + rewind 0x0924 + next 0x0823 + prev 0x0621 + record 0x0C27 + fullscreen 0x0E39 + dvdmenu 0x0E19 + dvdaudio 0x0F3A + power 0x0702 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 +# +# contributed by: Peter J. Weyers <lirc(a)usr-local.de> +# +# brand: MEDION / ATI +# model no. of remote control: 40005927 +# devices being controlled by this remote: +# +# This is an USB attached reciever wich works by radio, not by IR. It is +# most probably a relabeled ATI X10 device and sold together with the +# Medion Notebook MD41300. It works with the lirc_atiusb driver while the +# ati_remote module is NOT(!) loaded + +begin remote + + name MEDION_40005927 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 227972 + toggle_bit 0 + + + begin codes + TV_DVD 0x1481AC0000 + VIDEO 0x1482AD0000 + PHOTO 0x1459840000 + MUSIC 0x145B860000 + PC 0x1483AE0000 + MUTE 0x1455800000 + OK 0x14739E0000 + UP 0x146F9A0000 + DOWN 0x1477A20000 + LEFT 0x14729D0000 + RIGHT 0x14749F0000 + CH+ 0x145E890000 + CH- 0x145D880000 + VOL+ 0x14608B0000 + VOL- 0x14618C0000 + PLAY_PAUSE 0x147AA50000 + RECORD 0x147CA70000 + STOP 0x147DA80000 + FRWND 0x1479A40000 + FFWD 0x147BA60000 + PREV 0x1476A10000 + NEXT 0x1478A30000 + 1 0x14628D0000 + 2 0x14638E0000 + 3 0x14648F0000 + 4 0x1465900000 + 5 0x1466910000 + 6 0x1467920000 + 7 0x1468930000 + 8 0x1469940000 + 9 0x146A950000 + 0 0x146C970000 + RC 0x1484AF0000 + Screen_Symbol 0x146B960000 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006 +# +# contributed by +# +# brand: Medion USB Remote Control X10 +# model no. of remote control: 40009936 +# devices being controlled by this remote: +# + +begin remote + + name Medion_X10 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 219969 + toggle_bit 0 + + + begin codes + off 0x14D7020000 + tv 0x14012C0000 + video 0x1482AD0000 + dvd 0x14D9040000 + vt 0x146B960000 + audio 0x14DB060000 + radio 0x1483AE0000 + book 0x1406310000 + photo 0x145A850000 + info 0x14042F0000 + 0 0x146C970000 + 1 0x14E20D0000 + 2 0x14638E0000 + 3 0x14E40F0000 + 4 0x1465900000 + 5 0x14E6110000 + 6 0x1467920000 + 7 0x1468930000 + 8 0x14E9140000 + 9 0x146A950000 + ok 0x14F31E0000 + up 0x14CDF80000 + down 0x1446710000 + left 0x14F21D0000 + right 0x14749F0000 + menu 0x14EE190000 + back 0x1475A00000 + red 0x1407320000 + green 0x1488B30000 + yellow 0x1409340000 + blue 0x148AB50000 + mute 0x14D5000000 + ch+ 0x14608B0000 + ch- 0x14E10C0000 + vol+ 0x145E890000 + vol- 0x14DD080000 + switch 0x14719C0000 + stop 0x14FD280000 + pause 0x147EA90000 + play 0x14FA250000 + reward 0x1476A10000 + forward 0x14F8230000 + skipr 0x1479A40000 + skipf 0x14FB260000 + rec 0x147CA70000 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia new file mode 100644 index 0000000..7091aa4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia @@ -0,0 +1,72 @@ +# +# This is for the remote that Avermedia bundles with its TVCapture and +# TVPhone, the classic ones (pre 98). +# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes +# lirc's job easy. You need at least lirc-0.6.3 to use this config file +# +# this config file was automatically generated +# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001 +# +# contributed by Santiago Garcia Mantinan <manty@i.am> +# +# brand: Avermedia +# model: TVCapture & TVPhone, the classic ones (pre 98) +# supported devices: This remote control comes with some TV Tuner cards from +# Avermedia. + +begin remote + + name Avermedia + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8984 4527 + one 568 1681 + zero 568 558 + ptrail 547 + repeat 8985 2276 + pre_data_bits 16 + pre_data 0x2FD + gap 108069 + toggle_bit 0 + + + begin codes + TV 0x0000000000006897 + FM 0x000000000000A857 + EXIT 0x00000000000048B7 + DISPLAY 0x00000000000030CF + FREEZE 0x00000000000028D7 + CAPTURE 0x0000000000008877 + VIDEO 0x00000000000038C7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + AUDIO 0x00000000000018E7 + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + FULLSCREEN 0x000000000000F00F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + LOOP 0x000000000000C837 + 0 0x00000000000050AF + LEFTARROW 0x00000000000000FF + RIGHTARROW 0x000000000000E817 + MUTE 0x00000000000008F7 + COLOR 0x000000000000B04F + PREVIEW 0x000000000000708F + CHANNELUP 0x000000000000D827 + VOL_UP 0x00000000000058A7 + AUTOSCAN 0x000000000000B847 + ENTER 0x0000000000009867 + CHANNELDOWN 0x000000000000F807 + VOL_DOWN 0x0000000000007887 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 new file mode 100644 index 0000000..f60ee50 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 @@ -0,0 +1,175 @@ +# +# this config file was automatically generated +# using lirc-0.5.5 on Thu May 25 18:00:24 2000 +# +# contributed by Michal Kochanowicz & Jesus Bravo Alvarez +# +# brand: AVerMedia +# model: ? +# supported devices: some TVCapture98 (ID 0x00021461) and +# some TVPhone98 (ID 0x00011461) cards + +begin remote + + name TVCapture98 + bits 6 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 +# pre_data_bits 16 +# pre_data 0x40BF + repeat 9080 2189 + gap 108056 + repeat_bit 0 + + begin codes + TV/FM 0x0000000000000023 + CD 0x0000000000000022 +# TELETEXT 0x000000000000C03F + POWER 0x0000000000000027 + + 1 0x0000000000000018 + 2 0x0000000000000010 + 3 0x0000000000000008 + VIDEO 0x0000000000000000 + + 4 0x0000000000000019 + 5 0x0000000000000011 + 6 0x0000000000000009 + AUDIO 0x0000000000000001 + + 7 0x000000000000001A + 8 0x0000000000000012 + 9 0x000000000000000A + FULLSCREEN 0x0000000000000002 + + 0 0x000000000000001B + DISPLAY 0x0000000000000013 + COLOR 0x000000000000000B + LOOP 0x0000000000000003 + + UNLABELED 0x000000000000001C + LEFT 0x0000000000000014 + RIGHT 0x000000000000000C + PREVIEW 0x0000000000000004 + + AUTOSCAN 0x000000000000001D + FREEZE 0x0000000000000015 + CAPTURE 0x000000000000000D + MUTE 0x0000000000000005 + + RED 0x000000000000001E + VOL_DOWN 0x0000000000000016 + VOL_UP 0x000000000000000E + YELLOW 0x0000000000000006 + + GREEN 0x000000000000001F + CH_DOWN 0x0000000000000017 + CH_UP 0x000000000000000F + BLUE 0x0000000000000007 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 +# +# contributed by Christoph Bartelmus <lirc@bartelmus.de> +# +# brand: AVerMedia +# model: ? (36 buttons) +# supported devices: TVPhone98 card (ID 0x00031461) +# TVCapture98 card (ID 0x00041461) +# +# This config file does work with both homebrew receivers and +# original AVerMedia TV cards !!! +# + +begin remote + + name TVPhone98 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0x40BF + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x000000000000807F + CD 0x00000000000040BF + TELETEXT 0x000000000000C03F + VIDEO 0x00000000000020DF + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + AUDIO 0x00000000000010EF + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + FULLSCREEN 0x00000000000030CF + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + + PREVIEW 0x00000000000008F7 + 0 0x0000000000008877 + DISPLAY 0x00000000000048B7 + LOOP 0x000000000000C837 + MUTE 0x00000000000028D7 + AUTOSCAN 0x000000000000A857 + FREEZE 0x0000000000006897 + CAPTURE 0x000000000000E817 + PLAY 0x00000000000018E7 + RECORD 0x0000000000009867 + PAUSE 0x00000000000058A7 + STOP 0x000000000000D827 + YELLOW 0x00000000000038C7 + RED 0x000000000000B847 + VOL_DOWN 0x0000000000007887 + VOL_UP 0x000000000000F807 + end codes + +end remote + +begin remote + + name TVPhone98_ext + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0xC03F + gap 108056 + repeat_bit 0 + + begin codes + BLUE 0x00000000000000FF + GREEN 0x000000000000807F + CH_DOWN 0x00000000000040BF + CH_UP 0x000000000000C03F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate new file mode 100644 index 0000000..36b1c6b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate @@ -0,0 +1,61 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002 +# +# contributed by +# +# brand: AVerMedia +# model: +# supported devices: VDOMATE (ID 0x3001461) +# + +begin remote + + name hanircd + bits 32 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9086 4425 + one 625 1624 + zero 625 500 + ptrail 624 + repeat 9087 2185 + gap 107977 + toggle_bit 0 + + + begin codes + power 0x0000000040BF00FF + one 0x0000000040BFA05F + two 0x0000000040BF609F + three 0x0000000040BFE01F + four 0x0000000040BF906F + five 0x0000000040BF50AF + six 0x0000000040BFD02F + seven 0x0000000040BFB04F + eight 0x0000000040BF708F + nine 0x0000000040BFF00F + zero 0x0000000040BF8877 + video 0x0000000040BF20DF + fullscreen 0x0000000040BF30CF + display 0x0000000040BF48B7 + color 0x0000000040BFC837 + loop 0x0000000040BF08F7 + coloup 0x0000000040BF6897 + colordn 0x0000000040BFE817 + preview 0x0000000040BF28D7 + autoscan 0x0000000040BF9867 + freeze 0x0000000040BF58A7 + capture 0x0000000040BFD827 + mute 0x0000000040BF18E7 + volumeup 0x0000000040BF7887 + volumedown 0x0000000040BFF807 + chnldown 0x00000000C03F40BF + chnlup 0x00000000C03FC03F + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia new file mode 100644 index 0000000..e950862 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +#PROTOCOL IntelliMouse +PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * FM + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOLUP +MOVE_OUT * VOLDOWN + +BUTTON1_CLICK * DISPLAY +BUTTON2_CLICK * FREEZE +BUTTON3_CLICK * CAPTURE + +BUTTON1_TOGGLE * AUDIO +BUTTON2_TOGGLE * FULLSCREEN +BUTTON3_TOGGLE * LOOP diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 new file mode 100644 index 0000000..2885372 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 @@ -0,0 +1,37 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +# ACTIVATE * MENUE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_UP +MOVE_OUT * VOL_DOWN + +BUTTON1_DOWN * 5 +BUTTON1_UP * 0 + +BUTTON1_DOWN * TV/FM +BUTTON2_DOWN * CD +BUTTON3_DOWN * TELETEXT +BUTTON1_CLICK * DISPLAY +BUTTON3_CLICK * LOOP + +BUTTON1_TOGGLE * VIDEO +BUTTON2_TOGGLE * AUDIO +BUTTON3_TOGGLE * FULLSCREEN diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy new file mode 100644 index 0000000..1fd689f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy @@ -0,0 +1,63 @@ +# +# this config file was automatically generated +# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001 +# +# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> +# +# brand: BESTBUY +# model: Easy TV (BT848) +# supported devices: +# + +begin remote + + name BESTBUY + bits 5 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 3 + pre_data 0x0 +# gap 149990 + gap 199989 + toggle_bit 2 + + + begin codes + 0 0x0000000000000000 + 1 0x0000000000000001 + 2 0x0000000000000002 + 3 0x0000000000000003 + 4 0x0000000000000004 + 5 0x0000000000000005 + 6 0x0000000000000006 + 7 0x0000000000000007 + 8 0x0000000000000008 + 9 0x0000000000000009 + TV 0x000000000000001C + POWER 0x0000000000000012 + VIDEO 0x0000000000000011 + PREVIEW 0x000000000000000F + MUTE 0x0000000000000013 + SCAN 0x0000000000000010 + CHANNEL_UP 0x000000000000001A + CHANNEL_DOWN 0x000000000000001E + VOL_UP 0x000000000000001B + VOL_DOWN 0x000000000000001F + LOOP 0x000000000000000A + 100 0x0000000000000017 + ZOOM 0x000000000000000D + RECORD 0x000000000000000E + STOP 0x000000000000001D + PLAY 0x0000000000000019 + FREEZE 0x0000000000000016 + COLOR 0x0000000000000014 + LEFT 0x0000000000000018 + RIGHT 0x000000000000000C + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 new file mode 100644 index 0000000..77e87e3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 @@ -0,0 +1,59 @@ +# +# this config file was automatically generated +# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001 +# +# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> +# +# brand: BESTBUY +# model: EASY TV (BT878) +# supported devices: +# + +begin remote + + name BESTBUY + bits 7 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 1 + pre_data 0x0 + gap 199981 + toggle_bit 0 + + + begin codes + TV/FM 0x0000000000000043 + SCAN 0x0000000000000047 + ZOOM 0x000000000000005C + POWER 0x000000000000005E + 1 0x0000000000000041 + 2 0x000000000000004B + 3 0x000000000000005B + VOL+ 0x000000000000005F + 4 0x0000000000000045 + 5 0x0000000000000049 + 6 0x0000000000000055 + VOL- 0x0000000000000057 + 7 0x0000000000000046 + 8 0x000000000000004A + 9 0x0000000000000052 + CH+ 0x0000000000000056 + 0 0x0000000000000042 + LOOP 0x0000000000000053 + +100 0x0000000000000050 + CH- 0x0000000000000054 + SOURCE 0x0000000000000040 + MUTE 0x0000000000000058 + - 0x0000000000000044 + FUNCTION 0x000000000000004E + + 0x000000000000004C + RESET 0x000000000000004D + FREEZE 0x000000000000004F + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy new file mode 100644 index 0000000..e57d11f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * RESERVED + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CHANNEL_UP +MOVE_OUT * CHANNEL_DOWN + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * ZOOM +BUTTON2_TOGGLE * RECORD +BUTTON3_TOGGLE * STOP + +BUTTON1_CLICK * POWER +BUTTON2_CLICK * TV +BUTTON3_CLICK * SCAN + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 new file mode 100644 index 0000000..c515058 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 @@ -0,0 +1,34 @@ +# +# lircmd config file +# + +#PROTOCOL IntelliMouse +PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * PLAY + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH+ +MOVE_OUT * CH- + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * FUNCTION +BUTTON2_TOGGLE * - +BUTTON3_TOGGLE * + + +BUTTON1_CLICK * TV/FM +BUTTON2_CLICK * SCAN +BUTTON3_CLICK * ZOOM + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca new file mode 100644 index 0000000..c1a0fa1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca @@ -0,0 +1,46 @@ +# +# +# contributed by Konrad Riedel <k.riedel@gmx.de> +# +# brand: CARACA +# model: RC5 Remote Control +# +# supported devices: +# CARACA nodes - see http://caraca.sourceforge.net +# first byte: node address +# 2nd byte: ir code +# + +begin remote + + name Caraca + bits 16 + + begin codes + POWER 0x3ff3 + 1 0x3ffe + 2 0x3ffd + 3 0x3ffc + 4 0x3ffb + 5 0x3ffa + 6 0x3ff9 + 7 0x3ff8 + 8 0x3ff7 + 9 0x3ff6 + 0 0x3ff5 + PAUSE 0x3fcf + EJECT 0x3fe2 + SEEK- 0x3fcd + PLAY 0x3fca + SEEK+ 0x3fcb + RECORD 0x3fd2 + STOP 0x3fc9 + CH- 0x3fde + CH+ 0x3fdf + VOL- 0x3fee + VOL+ 0x3fef + MUTE 0x3ff2 + TV/FM 0x3fe3 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca new file mode 100644 index 0000000..6baf5e4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca @@ -0,0 +1,134 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Konrad Riedel <k.riedel@gmx.de> +# +begin + prog = irexec + button = tv/fm + config = xawtv -geometry +64+64 & + mode = tv + flags = once +end + +begin tv + begin + prog = xawtv + button = power + config = quit + flags = mode + end + begin + prog = xawtv + button = source + repeat = 1 + config = setinput next + end + begin + prog = xawtv + button = zoom + repeat = 1 + config = fullscreen + end + begin + prog = xawtv + button = ch- + repeat = 1 + config = setstation prev + end + begin + prog = xawtv + button = ch+ + repeat = 1 + config = setstation next + end + begin + prog = xawtv + button = record + repeat = 1 + #config = snap jpeg + config = quit + end + begin + prog = xawtv + button = scan + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = xawtv + button = MUTE + config = volume mute + end +end tv +begin + prog = irexec + button = power + config = xmms& + mode = xmms + flags = once +end + +begin xmms + begin + prog = xmms + button = play + config = PLAY + end + begin + prog = xmms + button = pause + config = PAUSE + end + begin + prog = xmms + button = stop + config = STOP + end + begin + prog = xmms + button = vol- + repeat = 1 + config = VOL_DOWN + end + begin + prog = xmms + button = vol+ + repeat = 1 + config = VOL_UP + end + + begin + prog = xmms + button = power + config = QUIT + flags = mode + end + begin + prog = xmms + button = mute + config = MUTE + end + begin + prog = xmms + button = seek+ + repeat = 1 + config = FWD + end + begin + prog = xmms + button = seek- + repeat = 1 + config = BWD + end + begin + prog = xmms + button = ch+ + config = NEXT + end + begin + prog = xmms + button = ch- + config = PREV + end +end xmms diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos new file mode 100644 index 0000000..764506c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos @@ -0,0 +1,56 @@ + +# +# This config file is for remote that comes with cheap TV Card made by +# Chronos. +# +# contributed by Tõnu Raitviir <jussuf@bumpclub.ee> +# +# brand: Chronos Video Shuttle II +# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23) +# + +begin remote + + name Chronos + bits 5 + eps 30 + aeps 100 + + gap 199766 + toggle_bit 0 + + begin codes + POWER 0x0000000000000000 + MOUSE_MODE 0x0000000000000010 + FULL_SCREEN 0x0000000000000008 + CH+ 0x0000000000000009 + CH- 0x0000000000000019 + 1 0x0000000000000018 + 2 0x0000000000000004 + 3 0x0000000000000014 + 4 0x000000000000001C + 5 0x0000000000000002 + 6 0x0000000000000012 + 7 0x000000000000001A + 8 0x0000000000000006 + 9 0x0000000000000016 + 0 0x000000000000001E + VOL+ 0x0000000000000005 + VOL- 0x000000000000001D + SOURCE 0x0000000000000003 + MUTE 0x000000000000001B + AUDIO 0x0000000000000015 + VIDEO 0x0000000000000011 + CANCEL 0x000000000000001F + ENTER 0x0000000000000001 + ESC 0x000000000000000B + RECALL 0x000000000000000C + AIR_CATV 0x000000000000000E + INC 0x000000000000000A + DEC 0x000000000000000D + BOX 0x0000000000000017 + DOWN_ARROW 0x0000000000000013 + LEFT_ARROW_TERM 0x000000000000000F + RIGHT_ARROW_TERM 0x0000000000000007 + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x new file mode 100644 index 0000000..62f711e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x @@ -0,0 +1,72 @@ +# +# this config file was automatically generated +# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000 +# +# contributed by Claas Langbehn <claas@bigfoot.com> +# Please read the documentation, faq etc. +# before sending me mails. +# +# brand: ASKEY +# model: AS-218 / AS-220 +# supported devices: ASKEY MagicTV +# +# comment: repeated keys are recognized, now. +# + +begin remote + + name AS-218 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9087 4424 + one 629 1617 + zero 629 495 + ptrail 632 + repeat 9088 2182 + pre_data_bits 16 + pre_data 0x61D6 + gap 107905 + repeat_bit 0 + + begin codes + 0 0x00000000000000FF + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + LOOP 0x00000000000050AF +# unused + FINE_UP(PLUS) 0x00000000000030CF + ZOOM 0x000000000000B04F + RECORD 0x000000000000708F + PREVIEW 0x000000000000F00F + + SCAN 0x00000000000008F7 + VIDEO 0x0000000000008877 + POWER 0x00000000000048B7 + MUTE 0x000000000000C837 + COLOR 0x00000000000028D7 +#unused + FREEZE 0x0000000000006897 + 100 0x000000000000E817 + FINE_DOWN(MINUS) 0x00000000000018E7 + PLAY 0x0000000000009867 + CH_UP 0x00000000000058A7 + VOL_UP 0x000000000000D827 + TV 0x00000000000038C7 + STOP 0x000000000000B847 + CH_DOWN 0x0000000000007887 + VOL_DOWN 0x000000000000F807 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb new file mode 100644 index 0000000..e84a68b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb @@ -0,0 +1,56 @@ +# +# contributed by Clemens Ladisch <clemens|ladisch.de> +# +# brand: Creative +# model: RM-1500 +# supported devices: Sound Blaster Extigy, SB Audigy 2 NX +# +# This is for the integrated IR receiver in Creative USB audio devices +# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio +# driver from ALSA 1.0.9 or later). +# +# This file should work with the exaudio driver, too. +# + +begin remote + + name RM-1500 + bits 8 + + begin codes + power 0x01 + 1 0x02 + 2 0x03 + 3 0x04 + 4 0x05 + 5 0x06 + 6 0x07 + 7 0x08 + 8 0x09 + 9 0x0a + 0 0x0b + cmss 0x0c + mute 0x0d + rec 0x0e + vol- 0x0f + vol+ 0x10 + stop-eject 0x11 + play-pause 0x12 + slow 0x13 + prev 0x14 + next 0x15 + step 0x16 + eax 0x17 + options 0x18 + display 0x19 + return 0x1a + start 0x1b + cancel 0x1c + up 0x1d + left 0x1e + ok 0x1f + right 0x20 + down 0x21 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox new file mode 100644 index 0000000..c5d2d9c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox @@ -0,0 +1,55 @@ +# +# contributed by Juergen Jaeschke <jaeschke.privat@gmx.de> +# +# brand: Creative +# model: Creative BreakOut-Box Remote Control +# + +begin remote + + name Creative BreakOut-Box IR + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 199984 + toggle_bit 0 + + begin codes + DVD/CD 0x0000000000000001 + DVR/TV 0x0000000000000000 + MENU 0x0000000000000003 + LANG 0x0000000000000005 + PLAYLIST 0x0000000000000011 + BACKWARD 0x000000000000000A + PLAY 0x0000000000000008 + FORWARD 0x000000000000000F + LAST 0x0000000000000002 + STOP 0x0000000000000007 + NEXT 0x0000000000000006 + MUTE 0x0000000000000014 + STEP 0x0000000000000009 + UP 0x000000000000000C + LEFT 0x000000000000000B + RIGHT 0x000000000000000D + DOWN 0x000000000000000E + VOL+ 0x0000000000000012 + VOL- 0x0000000000000015 + OK 0x0000000000000011 + ANGLE+ 0x0000000000000010 + ANGLE- 0x0000000000000013 + REC 0x0000000000000004 + 1 0x0000000000000016 + 2 0x0000000000000017 + 3 0x0000000000000018 + 4 0x0000000000000019 + 5 0x000000000000001A + 6 0x000000000000001B + 7 0x000000000000001C + 8 0x000000000000001D + 9 0x000000000000001E + 0 0x000000000000001F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative new file mode 100644 index 0000000..69f3d27 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative @@ -0,0 +1,59 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001 +# +# contributed by Stephen White <stephen@earth.li> +# +# brand: Creative +# model: PC-DVD Remote +# supported devices: Creative-Infra-Receiver +# + +begin remote + + name CREATIVE_INFRA_DVD + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9293 4302 + one 771 1494 + zero 771 358 + ptrail 756 + pre_data_bits 16 + pre_data 0x8435 + gap 108646 + toggle_bit 0 + + begin codes + play 0x00000000000005FA + stop 0x00000000000016E9 + pause 0x00000000000000FF + eject 0x00000000000002FD + last 0x00000000000017E8 + rrev 0x00000000000004FB + ffwd 0x00000000000006F9 + next 0x00000000000001FE + 1 0x00000000000008F7 + 2 0x00000000000009F6 + 3 0x0000000000000AF5 + shift 0x00000000000014EB + 4 0x0000000000000CF3 + 5 0x0000000000000DF2 + 6 0x0000000000000EF1 + mouse 0x00000000000007F8 + 7 0x00000000000010EF + 8 0x00000000000011EE + 9 0x00000000000012ED + vol+ 0x0000000000000FF0 + start 0x00000000000003FC + 0 0x00000000000015EA + mute 0x0000000000000BF4 + vol- 0x00000000000013EC + end codes + +end remote + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd new file mode 100644 index 0000000..cdaaad9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd @@ -0,0 +1,61 @@ +# +# this config file was automatically generated +# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001 +# +# contributed by +# +# brand: Creative +# model: CD-Rom Creditcard-sized IR-Controller +# supported devices: CD-Rom +# + +begin remote + + name CREATIVE_INFRA + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9051 4625 + one 534 1707 + zero 534 588 + ptrail 490 + repeat 9039 2363 + pre_data_bits 16 + pre_data 0x8435 + gap 108434 + min_repeat 1 + toggle_bit 0 + + + begin codes + PAUSE 0x00000000000001FE + PLAY 0x00000000000002FD + STOP 0x00000000000003FC + REW 0x00000000000005FA + PREV 0x00000000000006F9 + FF 0x00000000000007F8 + MENU 0x00000000000004FB + MOUSE 0x00000000000008F7 + 1 0x00000000000009F6 + 2 0x0000000000000AF5 + 3 0x0000000000000BF4 + 4 0x0000000000000DF2 + 5 0x0000000000000EF1 + 6 0x0000000000000FF0 + 7 0x00000000000011EE + 8 0x00000000000012ED + 9 0x00000000000013EC + 0 0x00000000000016E9 + MUTE 0x0000000000000CF3 + VOL_UP 0x00000000000010EF + VOL_DOWN 0x00000000000014EB + SHIFT 0x00000000000015EA + ENTER 0x00000000000017E8 + ZOOM 0x00000000000018E7 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive new file mode 100644 index 0000000..b68e5c4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive @@ -0,0 +1,115 @@ +# +# contributed by Andrew de Quincey +# +# brand: rm1000w +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name rm1000w + flags SPACE_ENC|CONST_LENGTH + bits 16 + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + pre_data_bits 16 + pre_data 0x8322 + gap 108000 + toggle_bit 0 + + repeat 9000 2250 + + frequency 38000 + duty_cycle 33 + + + begin codes + 1 0x0000000000008B74 + 2 0x0000000000008F70 + 3 0x000000000000906F + 4 0x0000000000008A75 + 5 0x000000000000847B + 6 0x0000000000007887 + 7 0x0000000000008976 + 8 0x000000000000837C + 9 0x0000000000007788 + 0 0x000000000000807F + stop 0x000000000000857A + play 0x0000000000007986 + pause 0x0000000000007986 + slow 0x0000000000007D82 + step 0x0000000000007E81 + prev 0x0000000000007F80 + next 0x0000000000007A85 + mute 0x0000000000006E91 + vol- 0x000000000000639C + vol+ 0x000000000000629D + eax 0x0000000000008C73 + options 0x000000000000827D + display 0x0000000000007689 + return 0x0000000000008E71 + start 0x0000000000008877 + close 0x0000000000007C83 + up 0x0000000000007B84 + down 0x0000000000008D72 + left 0x0000000000008778 + right 0x000000000000758A + ok 0x000000000000817E + power 0x000000000000619e + cmss 0x000000000000718e + record 0x000000000000738c + + end codes + +end remote + +# +# contributed by Stefan Brüns +# +# brand: Creative Audigy 2 ZS Platinum LiveDrive +# model no. of remote control: +# devices being controlled by this remote: +# + + +begin remote + + + name LiveDrive + flags SPACE_ENC|CONST_LENGTH + bits 16 + eps 30 + aeps 100 + + + header 9000 4500 + one 563 1687 + zero 563 562 + pre_data_bits 16 + pre_data 0x8000 + gap 108000 + toggle_bit 0 + + + repeat 9000 2250 + + + frequency 38000 + duty_cycle 33 + + + + + begin codes + mute 0x0000000000000040 + vol+ 0x0000000000008080 + vol- 0x0000000000008082 + cmss 0x0000000000000080 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV new file mode 100644 index 0000000..fbc91a8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV @@ -0,0 +1,221 @@ +# +# contributed by Chris Pascoe +# +# brand: DVICO +# model no. of remote control: DVB-T +# devices being controlled by this remote: +# + +begin remote + + name DVICO + bits 32 + eps 0 + aeps 0 + + one 0 0 + zero 0 0 + pre_data_bits 32 + pre_data 0x10046 + gap 195755 + post_data_bits 0 + toggle_bit 0 + + begin codes + 1 0x00000000000011F9 + 2 0x00000000000012F9 + 3 0x00000000000013F9 + 4 0x00000000000014F9 + 5 0x00000000000015F9 + 6 0x00000000000016F9 + 7 0x00000000000017F9 + 8 0x00000000000018F9 + 9 0x00000000000019F9 + 0 0x00000000000010F9 + power 0x0000000000000AF9 + pcoff 0x0000000000000CF9 + camera 0x0000000000001AF9 + record 0x0000000000001BF9 + chup 0x00000000000000F9 + chdown 0x00000000000001F9 + volup 0x00000000000002F9 + voldown 0x00000000000003F9 + playpause 0x0000000000001FF9 + rew 0x0000000000001CF9 + stop 0x0000000000001EF9 + ff 0x0000000000001DF9 + folder 0x00000000000040F9 + atvdtv 0x00000000000006F9 + dvhs 0x00000000000041F9 + menu 0x00000000000008F9 + aspect 0x00000000000007F9 + zoom 0x00000000000004F9 + epg 0x0000000000000BF9 + mute 0x0000000000000DF9 + back 0x0000000000000EF9 + hd 0x0000000000000FF9 + red 0x00000000000005F9 + green 0x00000000000009F9 + yellow 0x00000000000042F9 + blue 0x00000000000043F9 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005 +# +# contributed by anonymous +# +# brand: DVICO +# model no. of remote control: MCE Remote +# + +begin remote + + name DVICO_MCE + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x0 + post_data_bits 8 + post_data 0x0 + gap 195956 + toggle_bit 0 + + + begin codes + ok 0x0000000000FE5E00 + dtv 0x0000000000FE0200 + mp3 0x0000000000FE0E00 + dvd 0x0000000000FE1A00 + cpf 0x0000000000FE1E00 + setup 0x0000000000FE1600 + tv_onoff 0x0000000000FE4600 + guide 0x0000000000FE0A00 + back 0x0000000000FE4900 + more 0x0000000000FE5900 + dvd_menu 0x0000000000FE4D00 + alt_tab 0x0000000000FE5500 + replay 0x0000000000FE0F00 + skip 0x0000000000FE1200 + up 0x0000000000FE5100 + down 0x0000000000FE5300 + left 0x0000000000FE5B00 + right 0x0000000000FE5F00 + start 0x0000000000FE4200 + vol_up 0x0000000000FE1500 + vol_down 0x0000000000FE0500 + ch_up 0x0000000000FE1100 + ch_down 0x0000000000FE0900 + snapshot 0x0000000000FE5200 + live 0x0000000000FE5A00 + folder_open 0x0000000000FE1900 + 1 0x0000000000FE0B00 + 2 0x0000000000FE1700 + 3 0x0000000000FE1B00 + 4 0x0000000000FE0700 + 5 0x0000000000FE5000 + 6 0x0000000000FE5400 + 7 0x0000000000FE4800 + 8 0x0000000000FE4C00 + 9 0x0000000000FE5800 + 0 0x0000000000FE0300 + aspect 0x0000000000FE1300 + fullscreen 0x0000000000FE1F00 + rewind 0x0000000000FE4300 + playpause 0x0000000000FE4700 + fastforward 0x0000000000FE4F00 + stop 0x0000000000FE0D00 + mute 0x0000000000FE5700 + record 0x0000000000FE0100 + white_onoff 0x0000000000FE4E00 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005 +# +# contributed by: David Bussenschutt <buzz|oska.com> +# +# brand: "DViCO" +# model no. of remote control: "Fusion Remote MCE" +# devices being controlled by this remote: My MythTV install +# + +begin remote + + name DVICO_MCE + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 48 + pre_data 0x100460000 + post_data_bits 8 + post_data 0xFE + gap 195843 + toggle_bit 0 + + + begin codes + ok 0x5e + up 0x51 + down 0x53 + left 0x5B + right 0x5F + setup 0x16 + tv_onoff 0x46 + guide 0x0A + dtv 0x02 + mp3 0x0E + dvd 0x1A + cpf 0x1E + back 0x49 + more 0x59 + dvd_menu 0x4D + alt_tab 0x55 + replay 0x0F + skip 0x12 + start 0x42 + vol_up 0x15 + vol_down 0x05 + ch_up 0x11 + ch_down 0x09 + photo 0x52 + live 0x5A + folder 0x19 + 1 0x0B + 2 0x17 + 3 0x1B + 4 0x07 + 5 0x50 + 6 0x54 + 7 0x48 + 8 0x4C + 9 0x58 + 0 0x03 + ratio 0x13 + zoom 0x1F + rew 0x43 + playpause 0x47 + ff 0x4F + mute 0x57 + stop 0x0D + rec 0x01 + power_onoff 0x4e + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 new file mode 100644 index 0000000..a10181d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 @@ -0,0 +1,73 @@ +# +# Config file for AOpen XC Cube EA65, EA65-II +# Max Krasnyanskiy <maxk@qualcomm.com> +# + +begin remote + name EA65 + bits 24 + eps 10 + aeps 100 + + gap 960000 + toggle_bit 0 + + begin codes + tv/pvr 0x0014814c + photo 0x0017810e + htpc 0x0011811b + dvd/vcd 0x00128100 + cd/mp3 0x00138152 + fm 0x00158111 + video 0x0016810f + + 1 0x0041810b + 2 0x00428115 + 3 0x00438112 + 4 0x00448141 + 5 0x00458119 + 6 0x00468116 + 7 0x00478150 + 8 0x0048811a + 9 0x00498155 + * 0x00328156 + 0 0x00408158 + # 0x0030814d + + menu 0x00188104 + exit 0x001d8154 + enter 0x001e8101 + up 0x00198159 + down 0x001a811c + left 0x001c8102 + right 0x001b815d + + vol+ 0x00298103 + vol- 0x002a814e + ch+ 0x002c8113 + ch- 0x002d8117 + mute 0x00288105 + tune+ 0x002e8144 + tune- 0x002f8148 + mem 0x00318145 + scan 0x00278151 + + display 0x0034811f + eject 0x0035815c + rwnd 0x00228118 + ffwd 0x00218110 + rec 0x002b810a + repeate 0x0038815a + prev 0x00238107 + next 0x00248114 + time/shift 0x00338108 + stop 0x0020811d + play/pause 0x001f8109 + + play-pause 0x0080811d + stop-eject 0x00238107 + mode- 0x00ff1080 + mode+ 0x00ff1180 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 new file mode 100644 index 0000000..fd96d42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 @@ -0,0 +1,381 @@ +# +# Max Krasnyanskiy <maxk@qualcomm.com> +# + +# +# Xine key bindings. +# + +# start playback +begin + button = dvd/vcd + prog = xine + repeat = 1 + config = Play +end + +# playback pause toggle +begin + button = play/pause + prog = xine + repeat = 1 + config = Pause +end + +# stop playback +begin + button = stop + prog = xine + repeat = 1 + config = Stop +end + +# eject the current medium +begin + button = eject + prog = xine + repeat = 1 + config = Eject +end + +# scan playlist to grab stream infos +begin + button = mem + prog = xine + repeat = 1 + config = ScanPlaylistInfo +end + +# set position to -60 seconds in current stream +begin + button = rwnd + prog = xine + repeat = 1 + config = SeekRelative-60 +end + +# set position to +60 seconds in current stream +begin + button = ffwd + prog = xine + repeat = 1 + config = SeekRelative+60 +end + +# increment playback speed +begin + button = tune+ + prog = xine + repeat = 1 + config = SpeedFaster +end + +# decrement playback speed +begin + button = tune- + prog = xine + repeat = 1 + config = SpeedSlower +end + +# increment audio volume +begin + button = vol+ + prog = xine + repeat = 1 + config = Volume+ +end + +# decrement audio volume +begin + button = vol- + prog = xine + repeat = 1 + config = Volume- +end + +# audio muting toggle +begin + button = mute + prog = xine + repeat = 1 + config = Mute +end + +# select next audio channel +begin + button = ch+ + prog = xine + repeat = 1 + config = AudioChannelNext +end + +# select previous audio channel +begin + button = ch- + prog = xine + repeat = 1 + config = AudioChannelPrior +end + +# interlaced mode toggle +begin + button = scan + prog = xine + repeat = 1 + config = ToggleInterleave +end + +# cycle aspect ratio values +begin + button = display + prog = xine + repeat = 1 + config = ToggleAspectRatio +end + +# jump to Title Menu +begin + button = menu + prog = xine + repeat = 1 + config = TitleMenu +end + +# menu navigate up +begin + button = up + prog = xine + repeat = 1 + config = EventUp +end + +# menu navigate down +begin + button = down + prog = xine + repeat = 1 + config = EventDown +end + +# menu navigate left +begin + button = left + prog = xine + repeat = 1 + config = EventLeft +end + +# menu navigate right +begin + button = right + prog = xine + repeat = 1 + config = EventRight +end + +# menu select +begin + button = enter + prog = xine + repeat = 1 + config = EventSelect +end + +# jump to next chapter +begin + button = next + prog = xine + repeat = 1 + config = EventNext +end + +# jump to previous chapter +begin + button = prev + prog = xine + repeat = 1 + config = EventPrior +end + +# select a subtitle file +begin + button = repeat + prog = xine + repeat = 1 + config = SubSelector +end + +# enter the number 0 +begin + button = 0 + prog = xine + repeat = 1 + config = Number0 +end + +# enter the number 1 +begin + button = 1 + prog = xine + repeat = 1 + config = Number1 +end + +# enter the number 2 +begin + button = 2 + prog = xine + repeat = 1 + config = Number2 +end + +# enter the number 3 +begin + button = 3 + prog = xine + repeat = 1 + config = Number3 +end + +# enter the number 4 +begin + button = 4 + prog = xine + repeat = 1 + config = Number4 +end + +# enter the number 5 +begin + button = 5 + prog = xine + repeat = 1 + config = Number5 +end + +# enter the number 6 +begin + button = 6 + prog = xine + repeat = 1 + config = Number6 +end + +# enter the number 7 +begin + button = 7 + prog = xine + repeat = 1 + config = Number7 +end + +# enter the number 8 +begin + button = 8 + prog = xine + repeat = 1 + config = Number8 +end + +# enter the number 9 +begin + button = 9 + prog = xine + repeat = 1 + config = Number9 +end + +# quit the program +begin + button = exit + prog = xine + repeat = 1 + config = Quit +end + +## +# End of xine key bindings. +## + +## MPlayer lirc setup + +# Show OSD +begin + prog = mplayer + button = menu + repeat = 1 + config = osd +end + +# Pause playback +begin + prog = mplayer + button = play/pause + repeat = 1 + config = pause +end + +# Stop playback and exit +begin + prog = mplayer + button = stop + repeat = 1 + config = stop #quit +end + +# Mute +begin + prog = mplayer + button = mute + repeat = 1 + config = mute +end + +# Seek back 10 seconds +begin + prog = mplayer + button = rwnd + repeat = 1 + config = seek -10 +end + +# Seek forward 30 seconds +begin + prog = mplayer + button = ffwd + repeat = 1 + config = seek +10 +end + +# Quit +begin + prog = mplayer + button = exit + repeat = 1 + config = quit +end + +# Seek forward 10 minutes +begin + prog = mplayer + button = next + repeat = 1 + config = seek +600 +end + +# Seek backward 10 minutes +begin + prog = mplayer + button = prev + repeat = 1 + config = seek -600 +end + +# Toggle full-screen +begin + prog = mplayer + button = display + repeat = 1 + config = vo_fullscreen +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte new file mode 100644 index 0000000..d2330a3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte @@ -0,0 +1,53 @@ +# +# +# contributed by Vadim Shliakhov <svadim@nm.ru> +# +# brand: Ericsson +# model: Mobile Phone over Bluetooth (BTE) +# +# supported devices: +# Ericsson t520m, t630 +# + +begin remote + + name bte + bits 16 + + begin codes + 0 0x0030 + 1 0x0031 + 2 0x0032 + 3 0x0033 + 4 0x0034 + 5 0x0035 + 6 0x0036 + 7 0x0037 + 8 0x0038 + 9 0x0039 + STAR 0x002a # '*' + HASH 0x0023 # '#' + UP 0x005e # '^' + DOWN 0x0076 # 'v' + LEFT 0x003c # '<' + RIGHT 0x003e # '>' + CANCEL 0x0063 # 'c' + VOL_UP 0x0075 # 'u' + VOL_DOWN 0x0064 # 'd' + +# t520m + NO 0x0065 # 'e' + YES 0x0073 # 's' + OPTION 0x004c # 'L' + MEMO 0x0047 # 'G' - hides dialog widget! + +# t630 + F_LEFT 0x005b # '[' + F_RIGHT 0x005d # ']' - triggers 'e' + J_CLICK 0x3a4a # ':J' - triggers 'e' + RETURN 0x3a52 # ':R' - triggers 'e' + CAMERA 0x3a43 # ':C' + WAP 0x3a4f # ':O' + + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf new file mode 100644 index 0000000..e645cba --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf @@ -0,0 +1,31 @@ +# +# generic Denon config file +# +# source: various +# +# used by: Denon, Sharp + +begin remote + + name DENON + bits 15 + flags SPACE_ENC + eps 30 + aeps 100 + + one 275 1900 + zero 275 775 + ptrail 275 + gap 43000 + repeat_bit 0 + +# frequency 32000 +# frequency is 455/12 according to stewart@neuron.com +# remote is based on Sharp lc3715 IC + frequency 38000 +# duty_cycle unknown + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf new file mode 100644 index 0000000..e786f2b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf @@ -0,0 +1,53 @@ +# +# generic Motorola config file +# +# source: Motorola Application Note AN463 +# ICs 68HC05K0/MC144105/MC144107 +# +# used by Grundig +# +# currently you have to create config files for such remotes manually +# as irrecord always will record the start code + +begin remote + + name MOTOROLA_START/STOP + flags SHIFT_ENC|CONST_LENGTH + bits 10 + eps 10 + aeps 250 + + header 512 2560 + one 512 512 + zero 512 512 + gap 32800 + repeat_bit 0 + frequency 32000 + duty_cycle 25 + + begin codes + START/STOP 0x0000000000000000 + end codes + +end remote + +begin remote + + name MOTOROLA + flags SHIFT_ENC|CONST_LENGTH + bits 10 + eps 10 + aeps 250 + + header 512 2560 + one 512 512 + zero 512 512 + gap 131000 + repeat_bit 0 + frequency 32000 + duty_cycle 25 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf new file mode 100644 index 0000000..51c31d9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf @@ -0,0 +1,32 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Toshiba + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + repeat 9000 4500 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf new file mode 100644 index 0000000..068c253 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf @@ -0,0 +1,34 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo, +# Sanyo, Schneider, SEG, Yamaha + + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + repeat 9000 2250 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf new file mode 100644 index 0000000..18ee327 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf @@ -0,0 +1,30 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Canon, Creative, Domland, Orion + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf new file mode 100644 index 0000000..f62e3f9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf @@ -0,0 +1,30 @@ +# +# generic RC-5 config file +# +# source: SAA3010 datasheet +# +# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider + +begin remote + + name RC-5 + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 7 + gap 113792 + toggle_bit 2 + +# frequency 35750 + frequency 36000 + duty_cycle 50 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf new file mode 100644 index 0000000..9565707 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf @@ -0,0 +1,28 @@ +# +# generic RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips + +begin remote + + name RC-6 + bits 8 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 13 + pre_data 0xEFB + gap 108000 + toggle_bit 5 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf new file mode 100644 index 0000000..89f847a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf @@ -0,0 +1,23 @@ +begin remote + + name RCMM-32 + bits 32 + flags RCMM|CONST_LENGTH + eps 2 + aeps 100 + + header 417 278 + three 167 778 + two 167 611 + one 167 444 + zero 167 278 + ptrail 167 + pre_data_bits 0 + gap 99817 + repeat_bit 0 + + begin codes + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf new file mode 100644 index 0000000..b9702ea --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf @@ -0,0 +1,31 @@ +# +# generic RECS 80 config file +# +# source: SAA3008 datasheet +# +# used by: Saba, Technisat + +begin remote + + name RECS80 + bits 5 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 150 + + one 141 7590 + zero 141 5090 + ptrail 141 + pre_data_bits 6 + pre_data 0x22 + gap 121440 + toggle_bit 2 + +# frequency 37916 + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf new file mode 100644 index 0000000..fbcf8dc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf @@ -0,0 +1,34 @@ +# +# generic Sanyo config file +# +# source: CIrCC datasheet, exiting config files +# Sanyo LC7461M datasheet +# +# used by: Aiwa, Chinon, Sanyo + +begin remote + + name Sanyo + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 26 +# just a guess + gap 108000 + + repeat 9000 4500 + +# 455kHz/12 + frequency 37916 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf new file mode 100644 index 0000000..d62d12c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf @@ -0,0 +1,28 @@ +# +# generic Sony 12-bit config file +# +# source: various +# + +begin remote + + name SONY + bits 7 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 2400 600 + one 1200 600 + zero 600 600 + post_data_bits 5 + gap 45000 + min_repeat 2 + + frequency 40000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf new file mode 100644 index 0000000..4a64ca7 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf @@ -0,0 +1,29 @@ +# +# generic Sony 20-bit config file +# +# source: various +# + +begin remote + + name SONY + bits 7 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 2400 600 + one 1200 600 + zero 600 600 + post_data_bits 13 +# gap is just a guess + gap 45000 + min_repeat 2 + + frequency 40000 +# duty_cycle unknown + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap new file mode 100644 index 0000000..8e453b9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap @@ -0,0 +1,69 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc new file mode 100644 index 0000000..6f86bfe --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc @@ -0,0 +1,472 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY' +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = POWER + config = Esc +end + +# ??? +begin + prog = mythtv + button = MUTE + config = F9 +end + +begin + prog = mythtv + button = CH_UP + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = VOL_UP + repeat = 3 + config = ] +end + +begin + prog = mythtv + button = CH_DOWN + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = VOL_DOWN + repeat = 3 + config = [ +end + +begin + prog = mythtv + button = UP + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = LEFT +# navigates, or skips back during playback or live tv. + config = Left +end + +begin + prog = mythtv + button = OK + config = Return +end + +begin + prog = mythtv + button = RIGHT +# navigates, or skips forwards during playback or live tv. + config = Right +end + +begin + prog = mythtv + button = DOWN + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = MENU + config = m +end + +begin + prog = mythtv + button = EXIT + config = Esc +end + +begin + prog = mythtv + button = PLAY + config = l +end + +begin + prog = mythtv + button = PAUSE + config = p +end + +begin + prog = mythtv + button = STOP + config = Esc +end + +begin + prog = mythtv + # skip backward + button = |<< + config = PgUp +end + +begin + prog = mythtv + # skip forward + button = >>| + config = PgDown +end + +begin + prog = mythtv + button = RECORD + config = r +end + +begin + prog = mythtv + # rewind + button = << + config = < +end + +begin + prog = mythtv + # fast forward + button = >> + config = > +end + +begin + prog = mythtv + button = RED + # Delete + config = z +end + +begin + prog = mythtv + button = GREEN + # Info + config = i +end + +begin + prog = mythtv + button = YELLOW + # change aspect ratio + config = w +end + +begin + prog = mythtv + button = BLUE + config = Tab +end + +# MPLAYER +begin + prog = mplayer + button = POWER + config = quit +end + +begin + prog = mplayer + button = MUTE + config = mute +end + +begin + prog = mplayer + button = VOL_UP + repeat = 3 + config = volume +1 +end + +begin + prog = mplayer + button = VOL_DOWN + repeat = 3 + config = volume -1 +end + +begin + prog = mplayer + button = UP + repeat = 3 + config = seek +10 +end + +begin + prog = mplayer + button = LEFT +# navigates, or skips back during playback or live tv. + config = seek -30 +end + +begin + prog = mplayer + button = RIGHT +# navigates, or skips forwards during playback or live tv. + config = seek +60 +end + +begin + prog = mplayer + button = DOWN + repeat = 3 + config = seek -10 +end + +begin + prog = mplayer + button = EXIT + config = quit +end + +begin + prog = mplayer + button = play + config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin + prog = mplayer + button = STOP + config = quit +end + +begin + prog = mplayer + # skip backward + button = |<< + config = seek -600 +end + +begin + prog = mplayer + # skip forward + button = >>| + config = seek +600 +end + +begin + prog = mplayer + # slow forward + button = << + config = speed_mult 0.5 +end + +begin + prog = mplayer + # fast forward + button = >> + config = speed_mult 2.0 +end + +### Xine lirc setup By AnDy! + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = UP +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = DOWN +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = LEFT +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = RIGHT +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = EXIT +repeat = 3 +config = Menu +end + +begin +prog = xine +button = >> +repeat = 3 +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = << +repeat = 3 +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VOL_DOWN +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = >>| +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = |<< +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = GREEN +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = POWER +repeat = 3 +config = Quit +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg Binary files differnew file mode 100644 index 0000000..4d1a5fe --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge new file mode 100644 index 0000000..4987807 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge @@ -0,0 +1,274 @@ +# +# this config file was automatically generated +# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 +# +# contributed by Jens Leuschner <leuschner@gmx.net> +# +# brand: Hauppauge +# model: +# supported devices: WinTV primo; WinTV pci; WinTV radio +# +# This config file will work with both homebrew receivers and +# original Hauppauge TV cards !!! +# + +begin remote + + name Hauppauge + bits 13 + flags SHIFT_ENC + eps 30 + aeps 100 + + one 950 830 + zero 950 830 + plead 960 + gap 89584 + repeat_bit 2 + + begin codes + TV 0x000000000000100F + RADIO 0x000000000000100C + FULL_SCREEN 0x000000000000102E + CH+ 0x0000000000001020 + CH- 0x0000000000001021 + VOL- 0x0000000000001011 + VOL+ 0x0000000000001010 + MUTE 0x000000000000100D + SOURCE 0x0000000000001022 + 1 0x0000000000001001 + 2 0x0000000000001002 + 3 0x0000000000001003 + 4 0x0000000000001004 + 5 0x0000000000001005 + 6 0x0000000000001006 + 7 0x0000000000001007 + 8 0x0000000000001008 + 9 0x0000000000001009 + 0 0x0000000000001000 + RESERVED 0x000000000000101E + MINIMIZE 0x0000000000001026 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 +# +# contributed by +# +# brand: Hauppauge +# model no. of remote control: +# devices being controlled by this remote: PVR 2/350 +# + +begin remote + + name hauppauge_pvr + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Power 0x00000000000017FD + Go 0x00000000000017FB + 1 0x00000000000017C1 + 2 0x00000000000017C2 + 3 0x00000000000017C3 + 4 0x00000000000017C4 + 5 0x00000000000017C5 + 6 0x00000000000017C6 + 7 0x00000000000017C7 + 8 0x00000000000017C8 + 9 0x00000000000017C9 + Back/Exit 0x00000000000017DF + 0 0x00000000000017C0 + Menu 0x00000000000017CD + Red 0x00000000000017CB + Green 0x00000000000017EE + Yellow 0x00000000000017F8 + Blue 0x00000000000017E9 + Ch+ 0x00000000000017E0 + Ch- 0x00000000000017E1 + Vol- 0x00000000000017D1 + Vol+ 0x00000000000017D0 + Ok 0x00000000000017E5 + Mute 0x00000000000017CF + Blank 0x00000000000017CC + Full 0x00000000000017FC + Rewind 0x00000000000017F2 + Play 0x00000000000017F5 + Forward 0x00000000000017F4 + Record 0x00000000000017F7 + Stop 0x00000000000017F6 + Pause 0x00000000000017F0 + Replay 0x00000000000017E4 + Skip 0x00000000000017DE + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 +# +# contributed by +# +# brand: Hauppauge 350 +# Created: G.J. Werler (The Netherlands) +# Project: Mythtv Fedora Pundit-R www.mythtvportal.com +# Date: 2004/11/28 +# model no. of remote control: Hauppauge A415-HPG +# devices being controlled by this remote: PVR-350 +# + +begin remote + + name Hauppauge_350 + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Go 0x00000000000017BB + Power 0x00000000000017BD + TV 0x000000000000179C + Videos 0x0000000000001798 + Music 0x0000000000001799 + Pictures 0x000000000000179A + Guide 0x000000000000179B + Radio 0x000000000000178C + Up 0x0000000000001794 + Left 0x0000000000001796 + Right 0x0000000000001797 + Down 0x0000000000001795 + OK 0x00000000000017A5 + Back/Exit 0x000000000000179F + Menu/i 0x000000000000178D + Vol+ 0x0000000000001790 + Vol- 0x0000000000001791 + Prev.Ch 0x0000000000001792 + Mute 0x000000000000178F + Ch+ 0x00000000000017A0 + Ch- 0x00000000000017A1 + Record 0x00000000000017B7 + Stop 0x00000000000017B6 + Rewind 0x00000000000017B2 + Play 0x00000000000017B5 + Forward 0x00000000000017B4 + Replay/SkipBackward 0x00000000000017A4 + Pause 0x00000000000017B0 + SkipForward 0x000000000000179E + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Asterix 0x000000000000178A + 0 0x0000000000001780 + # 0x000000000000178E + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + end codes + +end remote +# +# this config file was automatically generated +# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 +# +# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at +# members of linux user group Vorarlberg www.lugv.at +# +# for ir remote controler from Hauppauge WinTV Nexus-S +# most of the keys are supported +# +# brand: Hauppauge +# model no. of remote control: WinTV Nexus-S +# devices being controlled by this remote: +# + +begin remote + + name Hauppauge_WinTV_Nexus-S + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 944 828 + zero 944 828 + plead 980 + gap 113932 + min_repeat 1 + toggle_bit 2 + + + begin codes + Up 0x0000000000001794 + Down 0x0000000000001795 + Left 0x0000000000001796 + Right 0x0000000000001797 + Power 0x00000000000017BD + Ok 0x00000000000017A5 + Menu 0x000000000000178D + Back 0x000000000000179F + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + 0 0x0000000000001780 + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Play 0x00000000000017B5 + Pause 0x00000000000017B0 + Stop 0x00000000000017B6 + Record 0x00000000000017B7 + FastFwd 0x00000000000017B4 + FastRwd 0x00000000000017B2 + Channel+ 0x00000000000017A0 + Channel- 0x00000000000017A1 + Volume+ 0x0000000000001790 + Volume- 0x0000000000001791 + Mute 0x000000000000178F + Timers 0x000000000000178A + Recordings 0x000000000000178E + Back 0x000000000000179F + Record 0x00000000000017B7 + Pause 0x00000000000017B0 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge new file mode 100644 index 0000000..d0f36e8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * RESERVED + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH+ +MOVE_OUT * CH- + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * RADIO +BUTTON2_TOGGLE * VOL+ +BUTTON3_TOGGLE * SOURCE + +BUTTON1_CLICK * TV +BUTTON1_CLICK * VOL- +BUTTON3_CLICK * MUTE + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg Binary files differnew file mode 100644 index 0000000..a40a1e8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo new file mode 100644 index 0000000..4b3d95a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo @@ -0,0 +1,63 @@ +#
+# this config file was automatically generated
+# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003
+#
+# contributed by Dimitris Michail <dmichail|yahoo.com>
+#
+# brand: Hercules
+# model no. of remote control: unknown
+# devices being controlled by this remote: Hercules SmartTV Stereo
+#
+# Works with module lirc_i2c, reports PV951 IR
+
+begin remote
+
+ name HERCULES_SMARTTV_STEREO
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 199964
+ toggle_bit 0
+
+
+ begin codes
+ POWER 0x00000000000048B7
+ MUTE 0x000000000000C837
+ PREVIEW 0x000000000000F00F
+ FULLSCREEN 0x00000000000038C7
+ AV/TV 0x0000000000008877
+ TELETEXT 0x00000000000008F7
+ 1 0x000000000000807F
+ 2 0x00000000000040BF
+ 3 0x000000000000C03F
+ 4 0x00000000000020DF
+ 5 0x000000000000A05F
+ 6 0x000000000000609F
+ 7 0x000000000000E01F
+ 8 0x00000000000010EF
+ 9 0x000000000000906F
+ 0 0x00000000000000FF
+ SNAPSHOT 0x00000000000050AF
+ 100+ 0x000000000000E817
+ CH+ 0x00000000000058A7
+ CH- 0x0000000000007887
+ VOL+ 0x000000000000D827
+ VOL- 0x000000000000F807
+ PAUSE 0x000000000000B04F
+ RECORD 0x000000000000708F
+ STOP 0x000000000000B847
+ PLAY 0x0000000000009867
+ TV_REPLAY 0x0000000000006897
+ TIME_SHIFT 0x00000000000028D7
+ SEEK_BACK 0x00000000000018E7
+ SEEK_FWD 0x00000000000030CF
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf new file mode 100644 index 0000000..97bbf4c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf @@ -0,0 +1,88 @@ +# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006 +#
+# contributed by M.Brakemeier +#
+# brand: SoundGraph +# model no. of remote control: iMON-PAD
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name iMON-PAD
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 235965
+ min_repeat 1
+ toggle_bit 0
+
+ begin codes
+ AppExit 0x288195B7
+ Power 0x289115B7 + Record 0x298115B7
+ Play 0x2A8115B7
+ Open 0x29B1d5B7 + Rewind 0x2A8195B7
+ Pause 0x2A9115B7
+ FastForward 0x2B8115B7
+ PrevChapter 0x2B9115B7
+ Stop 0x2B9715B7
+ NextChapter 0x298195B7
+ Esc 0x2BB715B7
+ Eject 0x299395B7
+ AppLauncher 0x29B715B7
+ MultiMon 0x2AB195B7
+ TaskSwitcher 0x2A9395B7
+ Mute 0x2B9595B7
+ Vol+ 0x28A395B7
+ Vol- 0x28A595B7
+ Ch+ 0x289395B7
+ Ch- 0x288795B7
+ Timer 0x2B8395B7
+ 1 0x28B595B7
+ 2 0x2BB195B7
+ 3 0x28B195B7
+ 4 0x2A8595B7
+ 5 0x299595B7
+ 6 0x2AA595B7
+ 7 0x2B9395B7
+ 8 0x2A8515B7
+ 9 0x2AA115B7
+ 0 0x2BA595B7
+ ShiftTab 0x28B515B7
+ Tab 0x29A115B7
+ Red 0x2B8515B7 # MyMovie + Green 0x299195B7 # MyMusic + Blue 0x2BA115B7 # MyPhoto + Yellow 0x28A515B7 # MyTV + Bookmark 0x288515B7
+ Thumbnail 0x2AB715B7
+ AspectRatio 0x29A595B7
+ FullScreen 0x2AA395B7
+ Purple 0x29A295B7 # MyDVD + Menu 0x2BA385B7
+ Caption 0x298595B7
+ Language 0x2B8595B7
+ MouseKeyboard 0x299115B7
+ SelectSpace 0x2A9315B7
+ MouseMenu 0x28B715B7
+ MouseRightClick 0x688481B7
+ Enter 0x28A195B7
+ MouseLeftClick 0x688301B7
+ WindowsKey 0x2B8195B7
+ Backspace 0x28A115B7
+ Mouse_N 0x690281B7 + Mouse_S 0x688291B7 + Mouse_W 0x6A8281B7 + Mouse_E 0x688A81B7 + end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc new file mode 100644 index 0000000..3ad34d8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc @@ -0,0 +1,240 @@ +################################### +# lircrc config as used by Stev391 June 2007 +# Not all of the buttons are configured yet, only the commonly used buttons +################################### + +# Escape +begin + prog = mythtv + button = AppExit + config = Esc + repeat = 3 +end + +# Escape Key 2 +begin + prog = mythtv + button = Esc + config = Esc +end + +# Channel Up +begin + prog = mythtv + button = Ch+ + config = Up + repeat = 3 +end + +# Channel Down +begin + prog = mythtv + button = Ch- + config = Down + repeat = 3 +end + +# Volume Up +begin + prog = mythtv + button = Vol+ + repeat = 3 + config = Right +end + +# Volume Down +begin + prog = mythtv + button = Vol- + repeat = 3 + config = Left +end + +# Enter/Return +begin + prog = mythtv + button = Enter + config = Return +end + +# Menu Button +begin + prog = mythtv + button = Menu + config = M +end + +# Mute +begin + prog = mythtv + button = Mute + config = F9 +end + +# Rewind +begin + prog = mythtv + button = Rewind + config = PgUp +end + +# Fast Forward +begin + prog = mythtv + button = FastForward + config = PgDown +end + +# Play +begin + prog = mythtv + button = Play + config = P +end + +# Pause +begin + prog = mythtv + button = Pause + config = P +end + +# Record +begin + prog = mythtv + button = Record + config = R +end + +# Stop +begin + prog = mythtv + button = Stop + config = O +end + +# Previous Track/Chapter +begin + prog = mythtv + button = PrevChapter + config = Home +end + +# Next Track/Chapter +begin + prog = mythtv + button = NextChapter + config = End +end + +# Jump Point to MythVideo +begin + prog = mythtv + button = MyMovie + config = F12 +end + +# Jump Point to MythMusic +begin + prog = mythtv + button = MyMusic + config = F11 +end + +# Jump Point to LiveTV +begin + prog = mythtv + button = MyTV + config = F10 +end + +# Jump Point to Main Menu +begin + prog = mythtv + button = Multimon + config = F2 +end + +# Jump Point to Myth Gallery +begin + prog = mythtv + button = MyPhoto + config = F3 +end + +# Jump Point to Play DVD +begin + prog = mythtv + button = MyDVD + config = F4 +end + +# Display Information +begin + prog = mythtv + button = Caption + config = I +end + +############################## +# Numbers +############################## +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon new file mode 100644 index 0000000..6875f3f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon @@ -0,0 +1,79 @@ +# +# contributed by Venky Raju (dev@venky.ws) +# +# brand: Soundgraph +# model no. of remote control: iMON MultiMedian +# +# devices being controlled by this remote: HTPC +# + +begin remote + + name IMON_MultiMedian + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 130 + + header 9000 4500 + one 625 1625 + zero 625 375 + ptrail 625 + repeat 8875 2125 + pre_data_bits 16 + pre_data 0x609F + gap 100000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + App.Exit 0x00000000000000FF + Power 0x000000000000807F + 1 0x00000000000040BF + 2 0x000000000000C03F + 3 0x00000000000020DF + 4 0x000000000000A05F + 5 0x000000000000609F + 6 0x000000000000E01F + 7 0x00000000000010EF + 8 0x000000000000906F + 9 0x00000000000050AF + 0 0x000000000000D02F + Windows 0x00000000000030CF + Menu 0x000000000000B04F + App.Launcher 0x000000000000708F + Function 0x000000000000F00F + Task.Switcher 0x00000000000008F7 + Back 0x0000000000008877 + Select 0x00000000000048B7 + Eject 0x0000000000009867 + Delete 0x00000000000018E7 + Up 0x000000000000C837 + Right 0x0000000000006897 + Down 0x000000000000E817 + Left 0x00000000000028D7 + Enter 0x000000000000A857 + Vol- 0x00000000000058A7 + Vol+ 0x000000000000D827 + Mute 0x00000000000038C7 + Play 0x000000000000B847 + Pause 0x0000000000007887 + Prev 0x000000000000F807 + Next 0x00000000000002FD + Rew 0x000000000000827D + Fwd 0x00000000000042BD + Stop 0x000000000000C23D + Open 0x00000000000022DD + Rec 0x000000000000A25D + Bookmark 0x000000000000629D + Thumbnail 0x000000000000E21D + Aspect 0x00000000000012ED + DVD.Menu 0x000000000000926D + DVD.Caption 0x00000000000052AD + DVD.Language 0x000000000000D22D + Full.Screen 0x00000000000032CD + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad new file mode 100644 index 0000000..e8b8818 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad @@ -0,0 +1,84 @@ +# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005
+#
+# contributed by Venky Raju
+#
+# brand: iMON-New
+# model no. of remote control: iMON-PAD
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name iMON-PAD
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 235965
+ min_repeat 1
+ toggle_bit 0
+
+
+ begin codes
+ AppExit 0x288195B7
+ Record 0x298115B7
+ Play 0x2A8115B7
+ SlowMotion 0x29B195B7
+ Rewind 0x2A8195B7
+ Pause 0x2A9115B7
+ FastForward 0x2B8115B7
+ PrevChapter 0x2B9115B7
+ Stop 0x2B9715B7
+ NextChapter 0x298195B7
+ Esc 0x2BB715B7
+ Eject 0x299395B7
+ AppLauncher 0x29B715B7
+ MultiMon 0x2AB195B7
+ TaskSwitcher 0x2A9395B7
+ Mute 0x2B9595B7
+ Vol+ 0x28A395B7
+ Vol- 0x28A595B7
+ Ch+ 0x289395B7
+ Ch- 0x288795B7
+ Timer 0x2B8395B7
+ 1 0x28B595B7
+ 2 0x2BB195B7
+ 3 0x28B195B7
+ 4 0x2A8595B7
+ 5 0x299595B7
+ 6 0x2AA595B7
+ 7 0x2B9395B7
+ 8 0x2A8515B7
+ 9 0x2AA115B7
+ 0 0x2BA595B7
+ ShiftTab 0x28B515B7
+ Tab 0x29A115B7
+ MyMovie 0x2B8515B7
+ MyMusic 0x299195B7
+ MyPhoto 0x2BA115B7
+ MyTV 0x28A515B7
+ Bookmark 0x288515B7
+ Thumbnail 0x2AB715B7
+ AspectRatio 0x29A595B7
+ FullScreen 0x2AA395B7
+ MyDVD 0x29A295B7
+ Menu 0x2BA385B7
+ Caption 0x298595B7
+ Language 0x2B8595B7
+ MouseKeyboard 0x299115B7
+ SelectSpace 0x2A9315B7
+ MouseMenu 0x28B715B7
+ MouseRightClick 0x688481B7
+ Enter 0x28A195B7
+ MouseLeftClick 0x688301B7
+ WindowsKey 0x2B8195B7
+ Backspace 0x28A115B7
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc new file mode 100644 index 0000000..cf6d2fc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc @@ -0,0 +1,109 @@ +# +# contributed by Venky Raju (dev@venky.ws) +# +# brand: Soundgraph +# model no. of remote control: iMON RSC +# +# devices being controlled by this remote: HTPC +# +# Credit: Changwoo Ryu <cwryu@debian.org> +# +begin remote + + name IMON_RSC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 130 + + header 9000 4500 + one 625 1625 + zero 625 375 + ptrail 625 + repeat 8875 2125 + pre_data_bits 16 + pre_data 0x0108 + + gap 100000 + + begin codes + App.Exit 0x00000000000008F7 + Power 0x000000000000F40B + ScreenSaver 0x00000000000052AD + Timer 0x000000000000926D + 1 0x0000000000002AD5 + 2 0x000000000000AA55 + 3 0x0000000000006A95 + 4 0x000000000000EA15 + 5 0x0000000000001AE5 + 6 0x0000000000009A65 + 7 0x0000000000005AA5 + 8 0x000000000000DA25 + 9 0x0000000000003AC5 + 0 0x000000000000BA45 + Desktop 0x000000000000817E + Max/Res 0x00000000000041BE + Esc 0x00000000000012ED + Windows 0x000000000000D22D + Menu 0x000000000000C13E + App.Launcher 0x000000000000A25D + Function 0x00000000000021DE + Task.Switcher 0x000000000000629D + Backspace 0x000000000000A15E + Mouse/Keyboard 0x000000000000619E + Space 0x000000000000E11E + Shift.Tab 0x0000000000007887 + Enter 0x00000000000019E6 + Tab 0x000000000000F807 + L.Click 0x000000000000d827 + DragNDrop 0x0000000000006897 + R.Click 0x000000000000b847 + Mute 0x00000000000011ee + Vol- 0x0000000000007a85 + Vol+ 0x000000000000fa05 + Play 0x00000000000032cd + Pause 0x000000000000b24d + Open 0x000000000000f20d + Prev 0x0000000000000af5 + Next 0x0000000000008a75 + Stop 0x000000000000728d + Rew 0x0000000000004ab5 + F.Fwd 0x000000000000ca35 + Full.Screen 0x000000000000916e + end codes + +end remote + +begin remote + + name IMON_RSC_STICK + bits 4 + flags SPACE_ENC + eps 40 + aeps 130 + + header 2125 1875 + one 625 1625 + zero 625 375 + ptrail 625 + + begin codes + STICK_N 0x0 + STICK_S 0x1 + STICK_E 0x2 + STICK_W 0x3 + STICK_NE 0x4 + STICK_SW 0x5 + STICK_SE 0x6 + STICK_NW 0x7 + STICK_NNE 0x8 + STICK_SSW 0x9 + STICK_SEE 0xa + STICK_NWW 0xb + STICK_NEE 0xc + STICK_SWW 0xd + STICK_SSE 0xe + STICK_NNW 0xf + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci new file mode 100644 index 0000000..076d032 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci @@ -0,0 +1,68 @@ +# +# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI +# +# this config file was automatically generated +# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003 +# +# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org) +# +# brand: I-O Data Co. +# model: GV-BCTV5/PCI +# supported devices: This remote control comes with the TV Tuner card +# GV-BCTV5/PCI from I-O Data Co. (Japan) +# + +begin remote + + name GV-BCTV5/PCI + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 149949 + toggle_bit 0 + + + begin codes + TV 0x0000000000000042 + FM 0x0000000000000022 + EPG 0x0000000000000062 + POWER 0x0000000000000002 + 1 0x0000000000000052 + 2 0x0000000000000032 + 3 0x0000000000000072 + 4 0x000000000000004A + 5 0x000000000000002A + 6 0x000000000000006A + 7 0x000000000000005A + 8 0x000000000000003A + 9 0x000000000000007A + 10 0x0000000000000046 + 11 0x0000000000000026 + 12 0x0000000000000066 + LIVE 0x0000000000000012 + TIME_SHIFT 0x000000000000000A + PLAY 0x000000000000001A + MULTI 0x0000000000000006 + VIDEO 0x0000000000000056 + SVIDEO 0x000000000000004E + CHANNEL_PLUS 0x0000000000000036 + CHANNEL_MINUS 0x000000000000002E + VOLUME_PLUS 0x0000000000000076 + VOLUME_MINUS 0x000000000000006E + MUTE 0x0000000000000016 + PICTURE_SIZE 0x000000000000000E + PAUSE 0x000000000000005E + HALT 0x000000000000003E + RECORD 0x000000000000007E + STOP 0x000000000000001E + REWIND 0x0000000000000043 + START 0x0000000000000023 + FORWARD 0x0000000000000063 + SYNC 0x0000000000000003 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one new file mode 100644 index 0000000..b962433 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one @@ -0,0 +1,62 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001 +# +# contributed by Ulrich Mueller <ulrich.mueller42@web.de> +# +# brand: KNC ONE +# model: TV Station (-/SE/PRO/RDS) +# +# brand: Anubis +# model: Typhoon TView Tuner (-/Stereo/RDS) +# + +begin remote + + name lircd.conf + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 199992 + toggle_bit 0 + + + begin codes + TV/FM 0x000000000000001C + OK 0x0000000000000015 + F1 0x000000000000000B + POWER 0x0000000000000012 + AV/TV 0x0000000000000011 + TELETEXT 0x000000000000000F + FULLSCREEN 0x0000000000000013 + MUTE 0x0000000000000010 + 1 0x0000000000000001 + 2 0x0000000000000002 + 3 0x0000000000000003 + 4 0x0000000000000004 + 5 0x0000000000000005 + 6 0x0000000000000006 + 7 0x0000000000000007 + 8 0x0000000000000008 + 9 0x0000000000000009 + 0 0x0000000000000000 + CH+ 0x000000000000001A + CH- 0x000000000000001E + VOL+ 0x000000000000001B + VOL- 0x000000000000001F + SNAPSHOT 0x000000000000000A + 100+ 0x0000000000000017 + RECORD 0x000000000000000D + PAUSE 0x000000000000000E + PLAY 0x000000000000001D + STOP 0x0000000000000019 + MENU 0x0000000000000016 + ESC 0x0000000000000014 + - 0x0000000000000018 + + 0x000000000000000C + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld new file mode 100644 index 0000000..280c47d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld @@ -0,0 +1,144 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni <pnis at coder.hu> +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name kworld-878 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + power 0x0000000000007887 + source 0x000000000000E01F + scan 0x00000000000038C7 + mute 0x00000000000018E7 + tv/fm 0x000000000000C03F + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + fm_scan+ 0x000000000000F807 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + fm_scan- 0x000000000000E817 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + fm_freq+ 0x00000000000030CF + 0 0x00000000000040BF + + 0x00000000000008F7 + recall 0x000000000000C837 + fm-freq- 0x00000000000020DF + record 0x00000000000000FF + stop 0x00000000000010EF + play 0x0000000000008877 + minimze 0x000000000000F00F + ch+ 0x000000000000F807 + zoom 0x0000000000009867 + vol- 0x00000000000028D7 + ch- 0x000000000000E817 + vol+ 0x0000000000006897 + snapshot 0x00000000000058A7 + mts 0x000000000000B04F + function- 0x00000000000020DF + function 0x000000000000708F + function+ 0x00000000000030CF + reset 0x000000000000B847 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni <pnis at coder.hu> +# Modified by Daniel Foote <freefoote at dview dot net> to +# work with remote that came with DVB-T card. +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name KWorld_DVB-T + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + ch- 0x0000000000007887 + 7 0x000000000000E01F + preview 0x00000000000038C7 + zoom 0x00000000000018E7 + 3 0x000000000000C03F + 1 0x000000000000807F + epg 0x000000000000D02F + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + 5 0x000000000000A05F + 9 0x000000000000906F + reset 0x000000000000A857 + turnleft 0x000000000000E817 + 6 0x000000000000609F + 0 0x00000000000050AF + power 0x00000000000048B7 + scan 0x00000000000030CF + 2 0x00000000000040BF + mute 0x00000000000008F7 + snap 0x000000000000C837 + 4 0x00000000000020DF + turnup 0x00000000000000FF + 8 0x00000000000010EF + backward 0x0000000000008877 + source 0x000000000000F00F + forward 0x0000000000009867 + pip 0x00000000000028D7 + ch- 0x000000000000E817 + play 0x0000000000006897 + ch+ 0x00000000000058A7 + stop 0x000000000000B04F + function- 0x00000000000020DF + pause 0x000000000000708F + function+ 0x00000000000030CF + rec 0x000000000000B847 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 new file mode 100644 index 0000000..3adfd4b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 @@ -0,0 +1,75 @@ +# +# this config file was written on Mon Dec 13 23:51:16 MET 2004 +# by Thomas Reitmayr (treitmayr@yahoo.com) +# +# brand: Leadtek +# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a +# limitation of the remote control. +# + + +begin remote + + name PVR2000 + bits 8 + flags SHIFT_ENC + gap 120000 + + begin codes + POWER 0x0000000000000070 + TV 0x0000000000000026 + FM 0x0000000000000027 + DVD 0x0000000000000028 + RED 0x000000000000003B + GREEN 0x000000000000003C + YELLOW 0x000000000000003D + BLUE 0x000000000000003E + TELETEXT 0x000000000000006F + SLEEP 0x0000000000000030 + MUTE 0x0000000000000064 + BOSS_KEY 0x0000000000000039 + CH_UP 0x000000000000007C + CH_DOWN 0x0000000000000060 + VOL_DOWN 0x0000000000000078 + VOL_UP 0x0000000000000074 + ENTER 0x0000000000000063 + CC 0x0000000000000020 + FULLSCREEN 0x0000000000000073 + MENU 0x000000000000003F + SCAN 0x0000000000000021 + REPLAY 0x0000000000000032 + PLAY 0x0000000000000033 + SKIP 0x0000000000000034 + OSD 0x0000000000000022 + BACK 0x0000000000000024 + STOP 0x0000000000000036 + FORWARD 0x0000000000000025 + LANGUAGE 0x0000000000000023 + 1 0x0000000000000075 + 2 0x0000000000000076 + 3 0x0000000000000077 + 4 0x0000000000000079 + 5 0x000000000000007A + 6 0x000000000000007B + 7 0x000000000000007D + 8 0x000000000000007E + 9 0x000000000000007F + 0 0x0000000000000062 + . 0x0000000000000031 + RECALL 0x0000000000000061 + VIDEO 0x000000000000006E + AUDIO 0x000000000000006B + DISPLAY 0x0000000000000066 + SNAPSHOT 0x0000000000000038 + PIP 0x000000000000003A + RECSTOP 0x0000000000000036 + REC 0x0000000000000037 + TIMESHIFT 0x0000000000000035 + + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 new file mode 100644 index 0000000..47e5b8e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 @@ -0,0 +1,86 @@ +# Made by Leandro Lucarella <luca@lugmen.org.ar> +# +# brand: Leadtek +# model: RM-0007 (bundeled with WinView 601TV card) +# +# Based on Winfast TV200: +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# modifications based on the config files from +# Juan Toledo <toledo@users.sourceforge.net> and +# Markus Lischka <mlischka@users.sourceforge.net> +# +# With some modification based on a patch for WinView 601 made by +# Juan FC. <juan@kili.com.ar> +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + +begin remote + + name RM-0007 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 629 1617 + zero 629 495 + ptrail 632 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes +# 1st row of buttons + POWER 0x00000000000000FF + MENU 0x000000000000807F + FM 0x00000000000040BF + PC/TV 0x000000000000C03F +# volume/channel + VOL_UP 0x00000000000020DF + VOL_DOWN 0x00000000000010EF + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 +# numbers pad + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + RETURN 0x0000000000008877 + 0 0x00000000000048B7 + DISPLAY 0x000000000000C837 +# unknown icon buttons + HELP 0x00000000000038C7 + SCAN 0x000000000000A857 + OSD 0x0000000000006897 + OPTIONS 0x000000000000E817 +# labeled buttons + MUTE 0x00000000000028D7 + MTS 0x000000000000D827 + VIDEO 0x0000000000007887 + CC 0x000000000000F807 +# color dots buttons + RED 0x00000000000018E7 + GREEN 0x0000000000009867 + YELLOW 0x00000000000058A7 + BLUE 0x000000000000B847 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 new file mode 100644 index 0000000..e0efcba --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 @@ -0,0 +1,101 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002 +# +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# brand: Leadtek +# model: RM-0010 (bundeled with TV2000 TV-card) +# +# modifications based on the config files from +# Juan Toledo <toledo@users.sourceforge.net> and +# Markus Lischka <mlischka@users.sourceforge.net> +# Reza Naima +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + + +begin remote + + name RM-0010 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x00000000000040BF + SCAN 0x000000000000A857 + DISPLAY 0x0000000000006897 + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + 0 0x00000000000048B7 + RECALL 0x0000000000008877 + ENTER 0x000000000000C837 + CC 0x000000000000F807 + MTS 0x000000000000D827 + FINE_DOWN 0x0000000000009867 + FINE_UP 0x00000000000018E7 + VIDEO 0x0000000000007887 + MUTE 0x00000000000028D7 + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 + VOL_DOWN 0x00000000000010EF + VOL_UP 0x00000000000020DF + FULLSCREEN 0x000000000000C03F + +# The following are only supported by the remote control bundled with +# the WinFast TV 2000 XP Deluxe card. + + SLEEP 0x00000000000002FD + BOSS_KEY 0x000000000000926D + RED 0x000000000000D22D + GREEN 0x00000000000032CD + YELLOW 0x000000000000B24D + BLUE 0x000000000000728D + PIP 0x00000000000052AD + . 0x000000000000827D + BACK 0x00000000000042BD + PLAY 0x000000000000C23D + NEXT 0x00000000000022DD + TIMESHIFT 0x000000000000A25D + STOP 0x000000000000629D + REC 0x000000000000E21D + SNAPSHOT 0x00000000000012ED + +# Only found on CoolCommand remote + + REPEAT 0x000000000000884B + TELETEXT 0x000000000000F807 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 new file mode 100644 index 0000000..ef1992a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 @@ -0,0 +1,36 @@ +# +# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control). +# +# Made by Leandro Lucarella <luca@lugmen.org.ar> based on mainstream lirc +# Leadtek WinFast2000TV (RM-0010 remote control). +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * BLUE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH_UP +MOVE_OUT * CH_DOWN + +BUTTON1_TOGGLE * RETURN +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * DISPLAY + +BUTTON1_CLICK * MENU +BUTTON1_CLICK * 5 +BUTTON2_CLICK * FM +BUTTON3_CLICK * PC/TV + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 new file mode 100644 index 0000000..ce0eff4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 @@ -0,0 +1,36 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * SCAN + +MOVE_N * 2 +MOVE_N * CH_UP +MOVE_NE * 3 +MOVE_E * 6 +MOVE_E * VOL_UP +MOVE_SE * 9 +MOVE_S * 8 +MOVE_S * CH_DOWN +MOVE_SW * 7 +MOVE_W * 4 +MOVE_W * VOL_DOWN +MOVE_NW * 1 +MOVE_IN * VIDEO +MOVE_OUT * MUTE + +BUTTON1_TOGGLE * RECALL +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * ENTER + +BUTTON1_CLICK * FULLSCREEN +BUTTON2_CLICK * FINE_DOWN +BUTTON3_CLICK * FINE_UP + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo new file mode 100644 index 0000000..6402ed0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo @@ -0,0 +1,87 @@ +# +# this config file was automatically generated +# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002 +# +# contributed by Jarek Zuk +# +# brand: LiveView +# devices being controlled by this remote: +# FlyVideo II +# FlyVideo'98 +# FlyVideo 98/FM /2000S +# Flyvideo 98FM (LR50Q) +# Typhoon TView TV/FM Tuner +# + +begin remote + + name flyvideo + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 4500 + pre_data_bits 26 + pre_data 0x01A1F2F + gap 108000 + toggle_bit 0 + + frequency 37916 + duty_cycle 33 + + begin codes + 0 0x000000000000F00F + 1 0x000000000000C03F + 2 0x00000000000020DF + 3 0x000000000000A05F + 4 0x000000000000E01F + 5 0x00000000000010EF + 6 0x000000000000906F + 7 0x000000000000D02F + 8 0x00000000000030CF + 9 0x000000000000B04F + POWER 0x00000000000000FF + MOUSE_MODE 0x000000000000807F + FULL_SCREEN 0x00000000000040BF + CHAN_PLUS 0x00000000000048B7 + CHAN_MINUS 0x000000000000C837 + CANCEL 0x000000000000F807 + ENTER 0x00000000000008F7 + VOL_PLUS 0x00000000000028D7 + VOL_MINUS 0x000000000000E817 + MENU 0x000000000000609F + UP 0x000000000000708F + DOWN 0x0000000000009867 + LEFT 0x000000000000609F + RIGHT 0x000000000000A857 + INC 0x00000000000050AF + DEC 0x0000000000006897 + ESC 0x00000000000058A7 + MUTE 0x000000000000D827 + RETURN 0x00000000000018E7 + CENTER 0x000000000000C837 + + CHANELS 0x00000000000047B8 + REV 0x0000000000008778 + FWD 0x000000000000C738 + VIDEO 0x0000000000008877 + +# from FlyVideo II config file + Audio 0x000000000000A857 +# newly added by Jarek Zuk + SQUARE 0x000000000000B847 + TAB_LEFT 0x0000000000007887 + TAB_RIGHT 0x00000000000038C7 + CENTER 0x000000000000C837 + LEFT 0x00000000000048B7 + + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo new file mode 100644 index 0000000..71cac36 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo @@ -0,0 +1,33 @@ +# +# lircmd config file for FlyVideo98 remote control +# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl> +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +#ACCELERATOR 2 30 5 + +ACTIVATE * MOUSE_MODE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_PLUS +MOVE_OUT * VOL_MINUS + +BUTTON1_CLICK * CANCEL +BUTTON2_CLICK * 0 +BUTTON3_CLICK * ENTER + +BUTTON1_TOGGLE * UP +BUTTON2_TOGGLE * VIDEO +BUTTON3_TOGGLE * INC diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo new file mode 100644 index 0000000..2175201 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo @@ -0,0 +1,131 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl> +# +begin + button = MOUSE_MODE + mode = mouse +end +begin + prog = irexec + button = FULL_SCREEN + config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 & + mode = tv + flags = once +end +begin + button = ESC + mode = system + flags = once +end +begin system + begin + prog = irexec + button = 1 + button = 2 + button = 3 + button = 6 + button = 3 + button = 6 + config = shutdown -r now + flags = mode + end +end system + +begin tv + begin + prog = irxevent + button = POWER + config = Key q xawtv + flags = mode + end + begin + prog = irxevent + button = FULL_SCREEN + config = Key f xawtv + config = Key f xawtv + repeat = 1 + end + begin + prog = irxevent + button = CHAN_MINUS + repeat = 1 + config = Key Page_Down xawtv + end + begin + prog = irxevent + button = CHAN_PLUS + repeat = 1 + config = Key Page_Up xawtv + end + begin + prog = irxevent + button = MENU + repeat = 1 + config = Key c xawtv + end + begin + prog = irxevent + button = CHANELS + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = irxevent + button = MUTE + config = Key Return xawtv + end + begin + prog = irxevent + button = VOL_PLUS + repeat = 1 + config = Key KP_Add xawtv + end + begin + prog = irxevent + button = VOL_MINUS + repeat = 1 + config = Key KP_Subtract xawtv + end + begin + prog = irexec + button = 1 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = 2 + config = xawtv-remote setstation 1 + end + begin + prog = irexec + button = 3 + config = xawtv-remote setstation 2 + end + begin + prog = irexec + button = 4 + config = xawtv-remote setstation 3 + end + begin + prog = irexec + button = 5 + config = xawtv-remote setstation 4 + end + begin + prog = irexec + button = 6 + config = xawtv-remote setstation 5 + end + begin + prog = irexec + button = 7 + config = xawtv-remote setstation 6 + end + begin + prog = irexec + button = 8 + config = xawtv-remote setstation 7 + end +end tv
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech new file mode 100644 index 0000000..1960b6f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech @@ -0,0 +1,111 @@ +# +# +# contributed by Isaac Lauer +# +# brand: Logitech +# model: Value Infrared Remote Control +# supported devices: +# + +begin remote + + name Logitech + bits 8 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 8 + pre_data 0xA0 + gap 29858 + repeat_bit 0 + + begin codes + POWER 0x0000000000000002 + 1 0x0000000000000015 + 2 0x0000000000000016 + 3 0x0000000000000014 + 4 0x0000000000000018 + 5 0x0000000000000019 + 6 0x0000000000000017 + 7 0x000000000000001C + 8 0x000000000000001B + 9 0x000000000000001A + 0 0x000000000000001D + PAUSE 0x0000000000000013 + EJECT 0x0000000000000011 + SEEK- 0x000000000000000E + PLAY 0x000000000000000F + SEEK+ 0x0000000000000010 + STOP 0x0000000000000012 + HELP 0x0000000000000001 + CH- 0x000000000000000D + CH+ 0x000000000000000A + VOL- 0x000000000000000C + VOL+ 0x0000000000000009 + * 0x000000000000001F + # 0x000000000000001E + MUTE 0x000000000000000B + BUTTONL_DOWN 0x0000000000000039 + BUTTONR_DOWN 0x000000000000003A + BUTTON_UP 0x0000000000000038 + ENTER 0x0000000000000008 + CLOSE 0x0000000000000023 + TV 0x0000000000000004 + GDE 0x0000000000000005 + CD 0x0000000000000006 + MSG 0x0000000000000007 + PHONE 0x0000000000000003 + MOUSE_N 0x0000000000000040 + MOUSE_NNE 0x0000000000000041 + MOUSE_NE 0x0000000000000042 + MOUSE_NEE 0x0000000000000043 + MOUSE_E 0x0000000000000044 + MOUSE_SEE 0x0000000000000045 + MOUSE_SE 0x0000000000000046 + MOUSE_SSE 0x0000000000000047 + MOUSE_S 0x0000000000000048 + MOUSE_SSW 0x0000000000000049 + MOUSE_SW 0x000000000000004A + MOUSE_SWW 0x000000000000004B + MOUSE_W 0x000000000000004C + MOUSE_NWW 0x000000000000004D + MOUSE_NW 0x000000000000004E + MOUSE_NNW 0x000000000000004F + MOUSE_N 0x0000000000000050 + MOUSE_NNE 0x0000000000000051 + MOUSE_NE 0x0000000000000052 + MOUSE_NEE 0x0000000000000053 + MOUSE_E 0x0000000000000054 + MOUSE_SEE 0x0000000000000055 + MOUSE_SE 0x0000000000000056 + MOUSE_SSE 0x0000000000000057 + MOUSE_S 0x0000000000000058 + MOUSE_SSW 0x0000000000000059 + MOUSE_SW 0x000000000000005A + MOUSE_SWW 0x000000000000005B + MOUSE_W 0x000000000000005C + MOUSE_NWW 0x000000000000005D + MOUSE_NW 0x000000000000005E + MOUSE_NNW 0x000000000000005F + MOUSE_N 0x0000000000000060 + MOUSE_NNE 0x0000000000000061 + MOUSE_NE 0x0000000000000062 + MOUSE_NEE 0x0000000000000063 + MOUSE_E 0x0000000000000064 + MOUSE_SEE 0x0000000000000065 + MOUSE_SE 0x0000000000000066 + MOUSE_SSE 0x0000000000000067 + MOUSE_S 0x0000000000000068 + MOUSE_SSW 0x0000000000000069 + MOUSE_SW 0x000000000000006A + MOUSE_SWW 0x000000000000006B + MOUSE_W 0x000000000000006C + MOUSE_NWW 0x000000000000006D + MOUSE_NW 0x000000000000006E + MOUSE_NWW 0x000000000000006F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech new file mode 100644 index 0000000..d8067f5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech @@ -0,0 +1,64 @@ +# +# lircmd config file for the Logitech control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + +MOVE_N Logitech MOUSE_N +MOVE_N Logitech MOUSE_N + +MOVE_N Logitech MOUSE_NNE +MOVE_NE Logitech MOUSE_NNE + +MOVE_NE Logitech MOUSE_NE +MOVE_NE Logitech MOUSE_NE + +MOVE_E Logitech MOUSE_NEE +MOVE_NE Logitech MOUSE_NEE + +MOVE_E Logitech MOUSE_E +MOVE_E Logitech MOUSE_E + +MOVE_E Logitech MOUSE_SEE +MOVE_SE Logitech MOUSE_SEE + +MOVE_SE Logitech MOUSE_SE +MOVE_SE Logitech MOUSE_SE + +MOVE_S Logitech MOUSE_SSE +MOVE_SE Logitech MOUSE_SSE + +MOVE_S Logitech MOUSE_S +MOVE_S Logitech MOUSE_S + +MOVE_S Logitech MOUSE_SSW +MOVE_SW Logitech MOUSE_SSW + +MOVE_SW Logitech MOUSE_SW +MOVE_SW Logitech MOUSE_SW + +MOVE_W Logitech MOUSE_SWW +MOVE_SW Logitech MOUSE_SWW + +MOVE_W Logitech MOUSE_W +MOVE_W Logitech MOUSE_W + +MOVE_W Logitech MOUSE_NWW +MOVE_NW Logitech MOUSE_NWW + +MOVE_NW Logitech MOUSE_NW +MOVE_NW Logitech MOUSE_NW + +MOVE_N Logitech MOUSE_NNW +MOVE_NW Logitech MOUSE_NNW + +BUTTON1_DOWN Logitech BUTTONL_DOWN +BUTTON2_DOWN Logitech BUTTONR_DOWN + +BUTTON1_UP Logitech BUTTON_UP +BUTTON2_UP Logitech BUTTON_UP diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf new file mode 100644 index 0000000..ec3b73e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf @@ -0,0 +1,88 @@ +# +# RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips +# +######### +# +# Philips Media Center Edition remote control +# For use with the USB MCE ir receiver +# +# Dan Conti dconti|acm.wwu.edu +# +# Radio, Print, RecTV are only available on the HP Media Center remote control +# + +begin remote + + name mceusb + bits 16 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 21 + pre_data 0x37FF0 + gap 105000 + toggle_bit 22 + rc6_mask 0x100000000 + + + begin codes + +# starts at af + Radio 0x00007baf + Print 0x00007bb1 + Videos 0x00007bb5 + Pictures 0x00007bb6 + RecTV 0x00007bb7 + Music 0x00007bb8 + TV 0x00007bb9 +# no ba - d8 + Guide 0x00007bd9 + LiveTV 0x00007bda + DVD 0x00007bdb + Back 0x00007bdc + OK 0x00007bdd + Right 0x00007bde + Left 0x00007bdf + Down 0x00007be0 + Up 0x00007be1 +# no e2,e3 + Replay 0x00007be4 + Skip 0x00007be5 + Stop 0x00007be6 + Pause 0x00007be7 + Record 0x00007be8 + Play 0x00007be9 + Rewind 0x00007bea + Forward 0x00007beb + ChanDown 0x00007bec + ChanUp 0x00007bed + VolDown 0x00007bee + VolUp 0x00007bef + More 0x00007bf0 + Mute 0x00007bf1 + Home 0x00007bf2 + Power 0x00007bf3 + Enter 0x00007bf4 + Clear 0x00007bf5 + Nine 0x00007bf6 + Eight 0x00007bf7 + Seven 0x00007bf8 + Six 0x00007bf9 + Five 0x00007bfa + Four 0x00007bfb + Three 0x00007bfc + Two 0x00007bfd + One 0x00007bfe + Zero 0x00007bff + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb new file mode 100644 index 0000000..041c2cb --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb @@ -0,0 +1,104 @@ +# +# RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips +# +######### +# +# Philips Media Center Edition remote control +# For use with the USB MCE ir receiver +# +# Dan Conti dconti|acm.wwu.edu +# +# Updated with codes for MCE 2005 Remote additional buttons +# *, #, Teletext, Red, Green, Yellow & Blue Buttons +# Note: TV power button transmits no code until programmed. +# Updated 12th September 2005 +# Graham Auld - mce|graham.auld.me.uk +# +# Radio, Print, RecTV are only available on the HP Media Center remote control +# + +begin remote + + name mceusb + bits 16 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 21 + pre_data 0x37FF0 + gap 105000 + toggle_bit 22 + rc6_mask 0x100000000 + + + begin codes + + Blue 0x00007ba1 + Yellow 0x00007ba2 + Green 0x00007ba3 + Red 0x00007ba4 + Teletext 0x00007ba5 + +# starts at af + Radio 0x00007baf + Print 0x00007bb1 + Videos 0x00007bb5 + Pictures 0x00007bb6 + RecTV 0x00007bb7 + Music 0x00007bb8 + TV 0x00007bb9 +# no ba - d8 + + Guide 0x00007bd9 + LiveTV 0x00007bda + DVD 0x00007bdb + Back 0x00007bdc + OK 0x00007bdd + Right 0x00007bde + Left 0x00007bdf + Down 0x00007be0 + Up 0x00007be1 + + Star 0x00007be2 + Hash 0x00007be3 + + Replay 0x00007be4 + Skip 0x00007be5 + Stop 0x00007be6 + Pause 0x00007be7 + Record 0x00007be8 + Play 0x00007be9 + Rewind 0x00007bea + Forward 0x00007beb + ChanDown 0x00007bec + ChanUp 0x00007bed + VolDown 0x00007bee + VolUp 0x00007bef + More 0x00007bf0 + Mute 0x00007bf1 + Home 0x00007bf2 + Power 0x00007bf3 + Enter 0x00007bf4 + Clear 0x00007bf5 + Nine 0x00007bf6 + Eight 0x00007bf7 + Seven 0x00007bf8 + Six 0x00007bf9 + Five 0x00007bfa + Four 0x00007bfb + Three 0x00007bfc + Two 0x00007bfd + One 0x00007bfe + Zero 0x00007bff + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb new file mode 100644 index 0000000..3738bfa --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb @@ -0,0 +1,393 @@ +# lircrc.mceusb + +################### +# +# MythTV +# +################### +begin + prog = mythtv + button = One + config = 1 +end + +begin + prog = mythtv + button = Two + config = 2 +end + +begin + prog = mythtv + button = Three + config = 3 +end + +begin + prog = mythtv + button = Four + config = 4 +end + +begin + prog = mythtv + button = Five + config = 5 +end + +begin + prog = mythtv + button = Six + config = 6 +end + +begin + prog = mythtv + button = Seven + config = 7 +end + +begin + prog = mythtv + button = Eight + config = 8 +end + +begin + prog = mythtv + button = Nine + config = 9 +end + +begin + prog = mythtv + button = Zero + config = 0 +end + +begin + prog = mythtv + button = Back + config = Esc +end + +begin + prog = mythtv + button = Guide + config = M +end + +begin + prog = mythtv + button = More + config = I +end + +begin + prog = mythtv + button = VolDown + config = F10 +end + +begin + prog = mythtv + button = VolUp + config = F11 +end + +begin + prog = mythtv + button = Up + config = Up +end + +begin + prog = mythtv + button = Down + config = Down +end + +begin + prog = mythtv + button = Left + config = Left +end + +begin + prog = mythtv + button = Right + config = Right +end + +begin + prog = mythtv + button = Play + config = Return +end + +begin + prog = mythtv + button = OK + config = Return +end + +begin + prog = mythtv + button = Mute + config = | +end + +begin + prog = mythtv + button = Rewind + config = Left +end + +begin + prog = mythtv + button = Forward + config = Right +end + +begin + prog = mythtv + button = Record + config = R +end + +begin + prog = mythtv + button = Stop + config = O +end + +begin + prog = mythtv + button = Pause + config = P +end + +# Use for backwards commercial skip +begin + prog = mythtv + button = Replay + config = Q +end + +# Use for forward commercial skip +begin + prog = mythtv + button = Skip + config = Z +end + + +################### +# +# MPlayer +# +################### +begin + prog = mplayer + button = Stop + config = quit +end + +begin + prog = mplayer + button = Play + config = seek +1 +end + +begin + prog = mplayer + button = More + config = osd +end + +begin + prog = mplayer + button = Replay + config = seek -10 + repeat = 1 +end + +begin + prog = mplayer + button = Skip + config = seek +10 + repeat = 1 +end + +begin + prog = mplayer + button = Rewind + config = seek -30 + repeat = 1 +end + +begin + prog = mplayer + button = Forward + config = seek +30 + repeat = 1 +end + +begin + prog = mplayer + button = Pause + config = pause +end + +begin + prog = mplayer + button = VolUp + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = VolDown + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = Mute + config = mute +end + +################### +# +# Xine +# +################### +# Xine lirc setup +begin +prog = xine +button = Play +repeat = 3 +config = Play +end + +begin +prog = xine +button = Stop +repeat = 3 +config = Stop +end + +begin +prog = xine +button = Back +repeat = 3 +config = Quit +end + +begin +prog = xine +button = Pause +repeat = 3 +config = Pause +end + +begin +prog = xine +button = Up +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = Down +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = Left +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = Right +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = Home +repeat = 3 +config = Menu +end + +begin +prog = xine +button = Forward +repeat = 3 +config = SpeedFaster +end + +begin +prog = xine +button = Rewind +repeat = 3 +config = SpeedSlower +end + +begin +prog = xine +button = VolUp +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VolDown +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = Mute +repeat = 3 +config = Mute +end + +begin +prog = xine +button = ChanUp +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = ChanDown +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = More +repeat = 3 +config = OSDStreamInfos +end + diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg Binary files differnew file mode 100644 index 0000000..0aa6a4a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg Binary files differnew file mode 100644 index 0000000..1d887dd --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell new file mode 100644 index 0000000..b63ab25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell @@ -0,0 +1,94 @@ +# Config file for Packard Bell Remotes (with repeat codes!) +# created by Samuel Wood (sjw@umr.edu) +# +# brand: Packard Bell Remote +# model: El Cheapo Packard Bell Remote +# +# This is a config file for the cheap excess Packard Bell remotes +# you sometimes can buy from online auctions like www.onsale.com. +# +# The receiver that comes with it hooks into the serial port and works +# fine with lirc 0.5.4. +# +# The receiver that comes with the remote is near garbage. If +# you don't point almost directly at it, it will not detect. But +# it's simpler than building your own. :-) +# +# Repeat works fine for me. You just have to modify or add the +# "repeat=" lines in your .lircrc. +# +# irrecord was used to generate the file, then I modified and +# added repeat codes. +# +# The button names used are identical to what was printed on the +# remote, except for the number pads (using actual numbers like +# "1" and so forth did not seem to work. Similarly, '*' is Star +# and '#' is Hash. LMB and RMB refer to the two mousepad buttons +# on the left and right respectively. +# +# I still need to modify the gap setting. Right now, if you don't +# hold the button down long enough, it may not register, but if +# you hold it too long, it will detect a repeat or two. Feel free +# to modify this to work better. If you get it to work better, send +# me a copy. :-) + +begin remote + + name PackBell + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9065 4500 + one 597 532 + zero 597 1643 + ptrail 597 + pre_data_bits 16 + pre_data 0xF708 + post_data_bits 1 + post_data 0x0 + gap 107000 + repeat_bit 0 + repeat 9050 2250 + + begin codes + Help 0x0000000000006F90 + Phone 0x0000000000004FB0 + Message 0x0000000000006E91 + SRS 0x0000000000004EB1 + CD 0x0000000000002FD0 + Aux1 0x0000000000000FF0 + Aux2 0x0000000000002ED1 + Aux3 0x0000000000000EF1 + LMB 0x00000000000023DC + RMB 0x000000000000639C + Up 0x00000000000037C8 + Down 0x00000000000057A8 + Left 0x0000000000007788 + Right 0x00000000000017E8 + Menu 0x0000000000007B84 + Mute 0x0000000000003BC4 + Enter 0x00000000000047B8 + CHUp 0x00000000000027D8 + CHDown 0x0000000000006798 + VolUp 0x0000000000005BA4 + VolDown 0x0000000000001BE4 + Display 0x00000000000007F8 + One 0x0000000000005EA1 + Two 0x0000000000001EE1 + Three 0x0000000000000BF4 + Four 0x0000000000007E81 + Five 0x0000000000003EC1 + Six 0x0000000000004BB4 + Seven 0x0000000000005FA0 + Eight 0x0000000000001FE0 + Nine 0x0000000000002BD4 + Zero 0x0000000000003FC0 + Star 0x0000000000007F80 + Hash 0x0000000000006B94 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak new file mode 100644 index 0000000..0a11e58 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak @@ -0,0 +1,116 @@ +# +# +# contributed by P_awe_L pablozrudnika@wp.pl +# +# brand: PC MAK/MINIMAK LASER/MINIMAK +# model: Value Infrared Remote Control +# supported devices: PC MAK receiver +# + +begin remote + + name PC_MAK + bits 8 + flags SPACE_ENC|CONST_LENGTH + eps 15 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 8 + pre_data 0xAA + gap 100000 + repeat_bit 0 + + begin codes + HOME 0x0000000000000001 + ARROW_UP 0x0000000000000002 + PG_UP 0x0000000000000003 + ARROW_LEFT 0x0000000000000004 + ENTER 0x0000000000000005 + ARROW_RIGHT 0x0000000000000006 + END 0x0000000000000007 + ARROW_DOWN 0x0000000000000008 + PG_DN 0x0000000000000009 + SPACE 0x000000000000000A + TAB 0x000000000000000B + ESC 0x000000000000000C + ALT 0x000000000000000D + PLAYLIST 0x000000000000000E + LOAD 0x000000000000000F + MOUSE_N 0x0000000000000010 + MOUSE_NE 0x0000000000000011 + MOUSE_E 0x0000000000000012 + MOUSE_SE 0x0000000000000013 + MOUSE_S 0x0000000000000014 + MOUSE_SW 0x0000000000000015 + MOUSE_W 0x0000000000000016 + MOUSE_NW 0x0000000000000017 + FULLSCREEN 0x0000000000000018 + BUTTONL_DOWN 0x0000000000000019 + BUTTONR_DOWN 0x000000000000001A + POWER 0x000000000000001B + A 0x000000000000001C + B 0x000000000000001D + C 0x000000000000001E + D 0x000000000000001F + VOL_DOWN 0x0000000000000020 + MUTE 0x0000000000000021 + VOL_UP 0x0000000000000022 + PLAY 0x0000000000000024 + PREV 0x0000000000000026 + PAUSE 0x0000000000000027 + NEXT 0x0000000000000028 + SKIP_BACK 0x0000000000000029 + STOP 0x000000000000002A + SKIP_FORW 0x000000000000002B + 1 0x0000000000000041 + 2 0x0000000000000042 + 3 0x0000000000000043 + 4 0x0000000000000044 + 5 0x0000000000000045 + 6 0x0000000000000046 + 7 0x0000000000000047 + 8 0x0000000000000048 + 9 0x0000000000000049 + 0 0x000000000000004A + sTAB 0x000000000000004B + sESC 0x000000000000004C + sALT 0x000000000000004D + sPLAYLIST 0x000000000000004E + TXT 0x000000000000004F + sMOUSE_N 0x0000000000000050 + sMOUSE_NE 0x0000000000000051 + sMOUSE_E 0x0000000000000052 + sMOUSE_SE 0x0000000000000053 + sMOUSE_S 0x0000000000000054 + sMOUSE_SW 0x0000000000000055 + sMOUSE_W 0x0000000000000056 + sMOUSE_NW 0x0000000000000057 + sOK 0x0000000000000058 + BUTTONL_UP 0x0000000000000059 + BUTTONR_UP 0x000000000000005A + EXIT 0x000000000000005B + E 0x000000000000005C + F 0x000000000000005D + G 0x000000000000005E + H 0x000000000000005F + sVOL_DOWN 0x0000000000000060 + sMUTE 0x0000000000000061 + sVOL_UP 0x0000000000000062 + sPLAY 0x0000000000000064 + sPREV 0x0000000000000066 + sPAUSE 0x0000000000000067 + sNEXT 0x0000000000000068 + ZOOM- 0x0000000000000069 + HELP 0x000000000000006A + ZOOM+ 0x000000000000006B + MM_PLAY 0x000000000000002F + MM_PREV 0x0000000000000030 + MM_NEXT 0x0000000000000031 + MM_PAUSE 0x000000000000005F + MM_BACK 0x0000000000000075 + MM_FORW 0x0000000000000079 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak new file mode 100644 index 0000000..d7c8dcf --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak @@ -0,0 +1,29 @@ +# +# lircmd config file for the PC_MAK control +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 25 2 + +#ACTIVATE * MENU + +MOVE_N PC_MAK MOUSE_N +MOVE_NE PC_MAK MOUSE_NE + +MOVE_E PC_MAK MOUSE_E +MOVE_SE PC_MAK MOUSE_SE + +MOVE_S PC_MAK MOUSE_S +MOVE_SW PC_MAK MOUSE_SW + +MOVE_W PC_MAK MOUSE_W +MOVE_NW PC_MAK MOUSE_NW + +BUTTON1_CLICK PC_MAK BUTTONL_DOWN +BUTTON3_CLICK PC_MAK BUTTONR_DOWN + +BUTTON1_TOGGLE PC_MAK BUTTONL_UP +BUTTON3_TOGGLE PC_MAK BUTTONR_UP diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak new file mode 100644 index 0000000..414e38a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak @@ -0,0 +1,1310 @@ +##################################################################### +# contributed by P_awe_L pablozrudnika@wp.pl +##################################################################### +# +# XMMS +# +##################################################################### +begin xmms + begin + prog = irxevent + button = LOAD + config = Key shift-L xmms + end + begin + prog = xmms + button = play + config = PLAY + end + begin + prog = irxevent + remote = * + button = PLAYLIST + config = Key alt-e XMMS + end + begin + prog = irxevent + remote = * + button = FULLSCREEN + config = Key ctrl-d XMMS + end + begin + prog = xmms + button = TXT + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = pause + config = PAUSE + end + begin + prog = xmms + button = stop + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + end + begin + prog = xmms + button = NEXT + config = NEXT + end + begin + prog = xmms + button = PREV + config = PREV + end + begin + prog = xmms + button = SKIP_FORW + repeat = 2 + config = FWD 3 + end + begin + prog = xmms + button = SKIP_BACK + repeat = 2 + config = BWD 3 + end + begin + prog = xmms + button = VOL_UP + repeat = 2 + config = VOL_UP 5 + end + begin + prog = xmms + remote = * + button = H + repeat = 2 + config = VOL_DOWN 5 + end +end xmms +##################################################################### +# +# MPlayer +# +##################################################################### +begin mplayer + begin + prog = mplayer + remote = * + button = PLAYLIST + config = gui_playlist + end + begin + prog = mplayer + remote = * + button = LOAD + config = gui_loadfile + end + begin + prog = mplayer + remote = * + button = TXT + config = gui_loadsubtitle + end + begin + prog = mplayer + remote = * + button = FULLSCREEN + config = vo_fullscreen + end + begin + prog = mplayer + remote = * + button = MUTE + config = mute + end + begin + prog = mplayer + remote = * + button = SKIP_FORW + repeat = 1 + config = seek +10 + end + begin + prog = mplayer + remote = * + button = VOL_DOWN + repeat = 1 + config = volume -1 + end + begin + prog = mplayer + remote = * + button = VOL_UP + repeat = 1 + config = volume 1 + end + begin + prog = mplayer + remote = * + button = SKIP_BACK + repeat = 1 + config = seek -10 + end + begin + prog = mplayer + button = play + config = pause + end + begin + prog = mplayer + button = pause + config = pause + end + begin + prog = mplayer + button = stop + config = seek 0 1\npause + end + begin + prog = mplayer + button = NEXT + config = pt_step 1 + end + begin + prog = mplayer + button = PREV + config = pt_step -1 + end + begin + prog = mplayer + button = EXIT + config = quit + end +end mplayer +##################################################################### +# +# GQview +# +##################################################################### +begin gqview + begin + prog = irxevent + remote = * + button = EXIT + config = Key ctrl-q GQview + end + begin + prog = irxevent + remote = * + button = FULLSCREEN + config = Key v GQview + end + begin + prog = irxevent + remote = * + button = PREV + repeat = 5 + config = Key Prior GQview + end + begin + prog = irxevent + remote = * + button = SKIP_BACK + config = Key Home GQview + end + begin + prog = irxevent + remote = * + button = SKIP_FORW + config = Key End GQview + end + begin + prog = irxevent + remote = * + button = NEXT + repeat = 5 + config = Key Next GQview + end + begin + prog = irxevent + button = ZOOM- + repeat = 5 + config = Key minus GQview + end + begin + prog = irxevent + button = ZOOM+ + repeat = 5 + config = Key plus GQview + end + begin + prog = irxevent + button = C + config = Key s GQview + end + begin + prog = irxevent + button = LOAD + config = Key o GQview + end +end gqview +##################################################################### +# +# Sterowanie Xwindow Linuxa +# +##################################################################### +begin linux + begin + prog = irexec + button = PAUSE + config = xscreensaver-command -activate + end + begin + prog = irxevent + button = sNEXT + config = Key alt-Escape RootWindow + end + begin + prog = irxevent + button = sPREV + config = Key alt-shift-Escape RootWindow + end + begin + prog = irexec + button = STOP + config = xset dpms force off + end + begin + prog = irexec + button = PLAY + config = xset dpms force on + end + begin + prog = irexec + button = EXIT + config = poweroff + end +end linux +##################################################################### +# +# Xine +# +##################################################################### +# Reduce the output window size. +begin xine + begin + prog = xine + button = xxxxx + config = WindowReduce + end + # Enlarge the output window size. + begin + prog = xine + button = xxxxx + config = WindowEnlarge + end + # Select next sub picture (subtitle) channel. + begin + prog = xine + button = NEXT + config = SpuNext + end + # Select previous sub picture (subtitle) channel. + begin + prog = xine + button = PREV + config = SpuPrior + end + # Visibility toggle of control window. + begin + prog = xine + button = xxxxx + config = ControlShow + end + # Visibility toggle of output window visibility. + begin + prog = xine + button = xxxxx + config = ToggleWindowVisibility + end + # Select next audio channel. + begin + prog = xine + button = xxxxx + config = AudioChannelNext + end + # Select previous audio channel. + begin + prog = xine + button = xxxxx + config = AudioChannelPrior + end + # Visibility toggle of playlist editor window. + begin + prog = xine + button = PLAYLIST + config = PlaylistEditor + end + # Playback pause toggle. + begin + prog = xine + button = PAUSE + config = Pause + end + # Visibility toggle of UI windows. + begin + prog = xine + button = xxxxx + config = ToggleVisiblity + end + # Fullscreen toggle. + begin + prog = xine + button = FULLSCREEN + config = ToggleFullscreen + end + # Aspect ratio values toggle. + begin + prog = xine + button = xxxxx + config = ToggleAspectRatio + end + # Interlaced mode toggle. + begin + prog = xine + button = xxxxx + config = ToggleInterleave + end + # Quit the program. + begin + prog = irxevent + button = EXIT + config = Key q xine + end + # Start playback. + begin + prog = xine + button = PLAY + config = Play + end + # Visibility toggle of the setup window. + begin + prog = xine + button = xxxxx + config = SetupShow + end + # Stop playback. + begin + prog = xine + button = STOP + config = Stop + end + # Select and play next mrl in the playlist. + begin + prog = xine + button = xxxxx + config = NextMrl + end + # Select and play previous mrl in the playlist. + begin + prog = xine + button = xxxxx + config = PriorMrl + end + # Eject the current medium. + begin + prog = xine + button = xxxxx + config = Eject + end + # Set position to beginning of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition0% + end + # Set position to 10% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition10% + end + # Set position to 20% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition20% + end + # Set position to 30% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition30% + end + # Set position to 40% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition40% + end + # Set position to 50% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition50% + end + # Set position to 60% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition60% + end + # Set position to 70% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition70% + end + # Set position to 80% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition80% + end + # Set position to 90% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition90% + end + # Set position to -60 seconds in current stream. + begin + prog = xine + button = xxxxx + config = SeekRelative-60 + end + # Set position to +60 seconds in current stream. + begin + prog = xine + button = xxxxx + config = SeekRelative+60 + end + # Set position to -15 seconds in current stream. + begin + prog = xine + button = SKIP_BACK + config = SeekRelative-15 + end + # Set position to +15 seconds in current stream. + begin + prog = xine + button = SKIP_FORW + config = SeekRelative+15 + end + # Visibility toggle of mrl browser window. + begin + prog = xine + button = xxxxx + config = MrlBrowser + end + # Audio muting toggle. + begin + prog = xine + button = MUTE + config = Mute + end + # Change audio syncing. + begin + prog = xine + button = xxxxx + config = AudioVideoDecay+ + end + # Change audio syncing. + begin + prog = xine + button = xxxxx + config = AudioVideoDecay- + end + # Reset audio video syncing offset. + begin + prog = xine + button = xxxxx + config = AudioVideoDecayReset + end + # Increment playback speed. + begin + prog = xine + button = xxxxx + config = SpeedFaster + end + # Decrement playback speed. + begin + prog = xine + button = xxxxx + config = SpeedSlower + end + # Increment audio volume. + begin + prog = xine + button = VOL_UP + config = Volume+ + end + # Decrement audio volume. + begin + prog = xine + button = VOL_DOWN + config = Volume- + end + # Take a snapshot (Internal image fetch and save). + begin + prog = xine + button = xxxxx + config = Snapshot + end + # Resize output window to stream size1:1. + begin + prog = xine + button = xxxxx + config = Zoom1:1 + end + # Grab pointer toggle. + begin + prog = xine + button = xxxxx + config = GrabPointer + end + # Menu 1 event. + begin + prog = xine + button = xxxxx + config = EventMenu1 + end + # Menu 2 event. + begin + prog = xine + button = xxxxx + config = EventMenu2 + end + # Menu 3 event. + begin + prog = xine + button = xxxxx + config = EventMenu3 + end + # Up event. + begin + prog = xine + button = xxxxx + config = EventUp + end + # Down event. + begin + prog = xine + button = xxxxx + config = EventDown + end + # Left event. + begin + prog = xine + button = xxxxx + config = EventLeft + end + # Right event. + begin + prog = xine + button = xxxxx + config = EventRight + end + # Previous event. + begin + prog = xine + button = xxxxx + config = EventPrior + end + # Next event. + begin + prog = xine + button = xxxxx + config = EventNext + end + # Previous angle event. + begin + prog = xine + button = xxxxx + config = EventAnglePrior + end + # Next angle event. + begin + prog = xine + button = xxxxx + config = EventAngleNext + end + # Select event. + begin + prog = xine + button = xxxxx + config = EventSelect + end + # Zoom into video. + begin + prog = xine + button = xxxxx + config = ZoomIn + end + # Zoom out of video. + begin + prog = xine + button = xxxxx + config = ZoomOut + end + # Zoom into video horizontally, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomInX + end + # Zoom out of video horizontally, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomOutX + end + # Zoom into video vertically, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomInY + end + # Zoom out of video vertically, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomOutY + end + # Reset zooming. + begin + prog = xine + button = xxxxx + config = ZoomReset + end + # Toggle TV modes on the DXR3 + begin + prog = xine + button = xxxxx + config = ToggleTVmode + end + # Visibility toggle of log viewer + begin + prog = xine + button = xxxxx + config = ViewlogShow + end +end xine +##################################################################### +# +# XAWTV +# +##################################################################### +begin xawtv + begin + prog = xawtv + remote = * + button = NEXT + config = setstation next + end + begin + prog = xawtv + remote = * + button = PREV + config = setstation prev + end + begin + prog = xawtv + remote = * + button = VOL_UP + config = volume inc + end + begin + prog = xawtv + remote = * + button = VOL_DOWN + config = volume dec + end + begin + prog = xawtv + remote = * + button = MUTE + config = volume mute + end + begin + prog = xawtv + remote = * + button = FULLSCREEN + config = fullscreen toggle + flags = once + end + begin + prog = xawtv + remote = * + button = PLAYLIST + config = setinput next + end + begin + prog = xawtv + remote = * + button = EXIT + config = quit + flags = once + end + begin + prog = xawtv + remote = * + button = ARROW_UP + config = keypad 1 + end + begin + prog = xawtv + remote = * + button = ARROW_UP + config = keypad 2 + end + begin + prog = xawtv + remote = * + button = PG_UP + config = keypad 3 + end + begin + prog = xawtv + remote = * + button = ARROW_LEFT + config = keypad 4 + end + begin + prog = xawtv + remote = * + button = ENTER + config = keypad 5 + end + begin + prog = xawtv + remote = * + button = ARROW_RIGHT + config = keypad 6 + end + begin + prog = xawtv + remote = * + button = END + config = keypad 7 + end + begin + prog = xawtv + remote = * + button = ARROW_DOWN + config = keypad 8 + end + begin + prog = xawtv + remote = * + button = PG_DN + config = keypad 9 + end + begin + prog = xawtv + remote = * + button = SPACE + config = keypad 0 + end +end xawtv +##################################################################### +# +# Xpdf +# +##################################################################### +begin xpdf + begin + prog = irxevent + remote = * + button = LOAD + config = Key o xpdf + end + begin + prog = irxevent + remote = * + button = PREV + config = Key p xpdf + end + begin + prog = irxevent + remote = * + button = NEXT + config = Key n xpdf + end + begin + prog = irxevent + remote = * + button = SKIP_BACK + config = Key BackSpace xpdf + end + begin + prog = irxevent + remote = * + button = SKIP_FORW + config = Key space xpdf + end + begin + prog = irxevent + remote = * + button = ZOOM- + config = Key minus xpdf + end + begin + prog = irxevent + remote = * + button = ZOOM+ + config = Key KP_Add xpdf + end + begin + prog = irxevent + remote = * + button = sPREV + config = Key z xpdf + end + begin + prog = irxevent + remote = * + button = sNEXT + config = Key w xpdf + end + begin + prog = irxevent + remote = * + button = EXIT + config = Key q xpdf + end +end xpdf +##################################################################### +# +# FREEVO +# In freevo_config.py variable LIRCRC have to show this file +# eg. LIRCRC = '/home/john/.lircrc' +##################################################################### +begin freevo + begin + prog = irexec + remote = * + button = POWER + config = freevo stop + end + begin + prog = freevo + remote = * + button = PLAYLIST + config = DISPLAY + end + begin + prog = freevo + remote = * + button = sPLAYLIST + config = SUBTITLE + end + begin + prog = freevo + remote = * + button = BUTTONR_DOWN + config = EXIT + end + begin + prog = freevo + remote = * + button = MOUSE_N + config = UP + end + begin + prog = freevo + remote = * + button = MOUSE_S + config = DOWN + end + begin + prog = freevo + remote = * + button = MOUSE_W + config = LEFT + end + begin + prog = freevo + remote = * + button = MOUSE_E + config = RIGHT + end + begin + prog = freevo + remote = * + button = BUTTONL_DOWN + config = SELECT + end + begin + prog = freevo + remote = * + button = FULLSCREEN + config = SELECT + end + begin + prog = freevo + remote = * + button = MUTE + config = MUTE + end + begin + prog = freevo + remote = * + button = VOL_UP + config = VOL+ + end + begin + prog = freevo + remote = * + button = VOL_DOWN + config = VOL- + end + begin + prog = freevo + remote = * + button = NEXT + config = CH+ + end + begin + prog = freevo + remote = * + button = PREV + config = CH- + end + begin + prog = freevo + remote = * + button = sPREV + config = PREV_CH + end + begin + prog = freevo + button = sNEXT + config = NEXT_CH + end + begin + prog = freevo + button = SKIP_BACK + config = REW + end + begin + prog = freevo + button = SKIP_FORW + config = FFWD + end + begin + prog = freevo + remote = * + button = PLAY + config = PLAY + end + begin + prog = freevo + remote = * + button = PAUSE + config = PAUSE + end + begin + prog = freevo + remote = * + button = STOP + config = STOP + end + begin + prog = freevo + remote = * + button = sPLAY + config = REC + end + begin + prog = freevo + remote = * + button = HELP + repeat = 10 + config = EJECT + end + begin + prog = freevo + remote = * + button = HOME + config = + end + begin + prog = freevo + remote = * + button = ARROW_UP + config = + end + begin + prog = freevo + remote = * + button = PG_UP + config = + end + begin + prog = freevo + remote = * + button = ARROW_LEFT + config = + end + begin + prog = freevo + remote = * + button = ENTER + config = + end + begin + prog = freevo + remote = * + button = ARROW_RIGHT + config = + end + begin + prog = freevo + remote = * + button = END + config = + end + begin + prog = freevo + remote = * + button = ARROW_DOWN + config = + end + begin + prog = freevo + remote = * + button = PG_DN + config = + end + begin + prog = freevo + remote = * + button = SPACE + config = + end + begin + prog = freevo + remote = * + button = TAB + config = + end + begin + prog = freevo + remote = * + button = ESC + config = + end + begin + prog = freevo + remote = * + button = ALT + config = + end +end freevo +##################################################################### +# +# Wybor aplikacji +# +##################################################################### +begin + prog = irexec + button = A + config = xmms& + mode = xmms +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = B + config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi + mode = mplayer +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = C + config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi + mode = gqview +end +begin + prog = none + button = D + mode = linux +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + remote = * + button = E + config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi + mode = xine +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = F + config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi + mode = xawtv +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = G + config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi + mode = xpdf +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + remote = * + button = H + config = freevo& + mode = freevo +end +##################################################################### +# +# Klawisze Globalne +# +##################################################################### +begin + prog = irxevent + button = HOME + config = Key Home CurrentWindow +end +begin + prog = irxevent + button = ARROW_UP + repeat = 5 + config = Key Up CurrentWindow +end +begin + prog = irxevent + button = PG_UP + repeat = 5 + config = Key Page_Up CurrentWindow +end +begin + prog = irxevent + button = ARROW_LEFT + repeat = 5 + config = Key Left CurrentWindow +end +begin + prog = irxevent + button = ENTER + config = Key Return CurrentWindow +end +begin + prog = irxevent + button = ARROW_RIGHT + repeat = 5 + config = Key Right CurrentWindow +end +begin + prog = irxevent + button = END + config = Key End CurrentWindow +end +begin + prog = irxevent + button = ARROW_DOWN + repeat = 5 + config = Key Down CurrentWindow +end +begin + prog = irxevent + button = PG_DN + repeat = 5 + config = Key Page_Down CurrentWindow +end +begin + prog = irxevent + button = TAB + config = Key Tab CurrentWindow +end +begin + prog = irxevent + remote = * + button = sTAB + config = Key shift-Tab CurrentWindow +end +begin + prog = irxevent + button = SPACE + config = Key space CurrentWindow +end +begin + prog = irxevent + button = ESC + config = Key Escape CurrentWindow +end +begin + prog = irxevent + button = ALT + config = Key UP CurrentWindow +end +begin + prog = irxevent + button = 1 + config = Key 1 CurrentWindow +end +begin + prog = irxevent + button = 2 + config = Key 2 CurrentWindow +end +begin + prog = irxevent + button = 3 + config = Key 3 CurrentWindow +end +begin + prog = irxevent + remote = * + button = 4 + config = Key 4 CurrentWindow +end +begin + prog = irxevent + button = 5 + config = Key 5 CurrentWindow +end +begin + prog = irxevent + button = 6 + config = Key 6 CurrentWindow +end +begin + prog = irxevent + button = 7 + config = Key 7 CurrentWindow +end +begin + prog = irxevent + button = 8 + config = Key 8 CurrentWindow +end +begin + prog = irxevent + button = 9 + config = Key 9 CurrentWindow +end +begin + prog = irxevent + button = 0 + config = Key 0 CurrentWindow +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg Binary files differnew file mode 100644 index 0000000..d2ccdd1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv new file mode 100644 index 0000000..4783e06 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv @@ -0,0 +1,94 @@ +# +# contributed by Bart Alewijnse <scarfboy@yahoo.com> +# +# brand: Pinnacle Systems +# model: PCTV Remote (Perhaps other ones as well) +# supported devices: there's only one I know of. (serial) +# +# Mail me if your remote is only partly supported, or if it has different +# buttons than listed below. +# + +begin remote + + name PinnacleSysPCTVRemote + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 180000 + + begin codes + Mute 0x000000000000003C + Power 0x000000000000002F + Chan+Play 0x000000000000003F + Chan-Stop 0x000000000000003E + Vol+FF 0x000000000000003B + Vol-Rew 0x000000000000003D + 1 0x0000000000000031 + 2 0x0000000000000032 + 3 0x0000000000000033 + 4 0x0000000000000034 + 5 0x0000000000000035 + 6 0x0000000000000036 + 7 0x0000000000000037 + 8 0x0000000000000038 + 9 0x0000000000000039 + Fullscreen 0x000000000000002D + 0/AV 0x000000000000003A + Info 0x000000000000002B + Preview 0x000000000000002E + Record 0x0000000000000027 + Chan_Last 0x0000000000000025 + F_TV 0x0000000000000026 + F_TELETEXT 0x0000000000000029 + F_RADIO 0x000000000000002A + +# +# here are some extra buttons a new version of the remote seems to have +# +# contributed by Robbert Monna <rjmonna@kabelfoon.nl> +# +# brand: Pinnacle Systems +# model: PCTV Remote (newest version?) +# supported devices: dongle on serial port (from TV-Card) +# + L 0x000000000000001F + Zoom 0x000000000000001E + vol+ 0x000000000000001B + vol- 0x000000000000000F + channel+ 0x0000000000000017 + channel- 0x000000000000001C + middle 0x000000000000001A + Menu 0x000000000000001D + next 0x0000000000000019 + undo 0x0000000000000016 + pause 0x0000000000000015 + redo 0x0000000000000013 + Rewind 0x000000000000000E + Play 0x000000000000000D + Stop 0x000000000000000B + FForward 0x0000000000000007 + EPG 0x0000000000000018 + +# here are some more buttons that seem to be mapped differently from +# the ones above + +# contributed by InterCeptor ceptor_7@freemail.hu +# +# brand: Pinnacle Systems PCTV Pro Remote +# model no. of remote control: (I can't find any numbers on it) +# supported devices: serial +# + + 9 0x0000000000000082 + Zoom 0x00000000000000B2 + middle 0x0000000000000014 + + + end codes +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv new file mode 100644 index 0000000..064ee57 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv @@ -0,0 +1,34 @@ +# +# contributed by Nathan Hand <nathanh@chirp.com.au> +# +# brand: Pixelview +# model: +# supported devices: Pixelview PlayTV PRO +# + +begin remote + name Pixelview + bits 8 + + begin codes + TV/FM 0x00000000000000e7 + FULL_SCREEN 0x00000000000000bf + CH+ 0x0000000000000049 + CH- 0x00000000000000c1 + VOL- 0x000000000000006a + VOL+ 0x000000000000004a + MUTE 0x0000000000000047 + SOURCE 0x00000000000000e1 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 new file mode 100644 index 0000000..f017a3b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 @@ -0,0 +1,54 @@ +# +# contributed by Michal Kochanowicz <mkochano@pld.org.pl> +# based on file contributred by Nathan Hand <nathanh@chirp.com.au> +# +# brand: PixelView +# model: BT878+W/FM +# supported devices: PixelView BT878+W/FM +# + +begin remote + name PixelView + bits 8 +# repeat_bit 2 + repeat 9080 2189 + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000aa + TV/FM 0x00000000000000e7 + TELETEXT 0x000000000000003f + SCAN 0x0000000000000041 + +/- 0x0000000000000069 + EJECT 0x000000000000002a + STOP 0x000000000000008a + SOURCE 0x00000000000000e1 + STEREO 0x00000000000000df + ENTER 0x000000000000005f + SEEK_NEXT 0x0000000000000067 + SEEK_FWD 0x00000000000000c7 + CH_UP 0x0000000000000049 + VOL_UP 0x000000000000004a + RECALL 0x0000000000000048 + PAUSE 0x0000000000000068 + PLAY 0x00000000000000ca + CH_DOWN 0x00000000000000c1 + VOL_DOWN 0x000000000000006a + SEEK_PREV 0x000000000000000a + SEEK_BACK 0x0000000000000042 + ZOOM 0x00000000000000bf + MUTE 0x0000000000000047 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro new file mode 100644 index 0000000..84e84a9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro @@ -0,0 +1,159 @@ +# +# brand: PixelView +# model: PlayTV Pro remote control +# +# supported devices: +# works both with home-brew and TV card receiver (use lirc-0.6.6 or better) +# + + +begin remote + + name pixelviewp + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 200 + + pre_data_bits 16 + pre_data 0x61d6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + + power 0x0000000000007887 + zoom 0x00000000000038C7 + scan 0x000000000000E01F + tv/fm 0x000000000000C03F + vol+ 0x000000000000F807 + vol- 0x000000000000E817 + chan+ 0x0000000000006897 + chan- 0x00000000000028D7 + mute 0x00000000000018E7 + source 0x00000000000000FF + loop 0x000000000000C837 + +100 0x00000000000008F7 + fn- 0x00000000000020DF + fn+ 0x00000000000030CF + reset 0x000000000000B04F + freeze 0x000000000000F00F + function 0x000000000000708F + 0 0x00000000000040BF + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + + end codes + +end remote + + +# This config file was automatically generated +# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005 +# +# contributed by Thadeu A. Coelho de Paula +# thadeudepaula (at) gmail (dot) com +# http://mundolivre.hostrix.com.br +# +# brand: PixelView +# model: PlayTV MPEG2 (M4900) +# +# supported devices: +# This TV Card + + +begin remote + + name PixelView_PlayTV_MPEG2 + bits 16 + eps 30 + aeps 100 + + pre_data_bits 16 + pre_data 0x61D6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + + + begin codes + timeshift 0xC03F + power 0x7887 + 1 0x807F + 2 0xD02F + 3 0xD827 + 4 0xA05F + 5 0x906F + 6 0xA857 + 7 0x609F + 8 0x50AF + 9 0x48B7 + 0 0x40BF + loop 0xC837 + +100 0x08F7 + source 0x00FF + mute 0x18E7 + ch+ 0x6897 + ch- 0x28D7 + vol+ 0xF807 + vol- 0xE817 + zoom 0x38C7 + snapshot 0x9867 + scan 0x58A7 + bw 0x20DF + rec 0x708F + fw 0x30CF + stop 0xB847 + play 0x10EF + pause 0xF00F + tv 0xB04F + fm 0xE01F + end codes + +end remote + +# CONTROL LAYOUT: +# +# TIMESHIFT POWER +# +# 1 2 3 +# 4 5 6 +# 7 8 9 +# LOOP 0 SCAN +# SOURCE MUTE +# +# CH+ +# VOL- ZOOM VOL+ +# CH- +# +# SNAPSHOT SCAN +# +# BW REC FW +# STOP PLAY PAUSE +# +# TV FM diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster new file mode 100644 index 0000000..1b75e42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster @@ -0,0 +1,117 @@ +# this config file was MANUALLY generated +# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000 +# +# contributed by Petre Rodan <rodan@subdimension.com> +# +# brand: PixelView +# model: RemoteMaster 2000 +# supported devices: ComboTV series +# receiver type: /dev/ttySx +# video card: PixelView bttv848 pll=1 type=5 +# + +begin remote + + name RemoteMaster_2000_12b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x12B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + +begin remote + + name RemoteMaster_2000_14b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x14B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro new file mode 100644 index 0000000..e277fe6 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro @@ -0,0 +1,29 @@ +# lircmd.conf file to be used with PixeView PlayTV pro +# +# lircmd config file +# + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * +100 + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * tv/fm +BUTTON2_TOGGLE * scan +BUTTON3_TOGGLE * zoom + +BUTTON1_CLICK * 0 +BUTTON2_CLICK * loop +BUTTON3_CLICK * source + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster new file mode 100644 index 0000000..07d2547 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster @@ -0,0 +1,31 @@ +# lircmd.conf file to be used with RemoteMaster 2000 +# +# lircmd config file +# + +# ACCELERATOR start max multiplier + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * ENTER + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * +10 +BUTTON2_TOGGLE * FREEZE +#BUTTON3_TOGGLE * LIST + +BUTTON1_CLICK * 5 +BUTTON2_CLICK * 0 +#BUTTON3_CLICK * POWER + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro new file mode 100644 index 0000000..4e495c8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro @@ -0,0 +1,134 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Artur Lipowski <alipowski@interia.pl> +# + begin + prog = irexec + button = power + config = xawtv-remote quit + flags = mode + end + begin + prog = irexec + button = source + repeat = 1 + config = xawtv-remote setinput next + end + begin + prog = irexec + button = zoom + repeat = 1 + config = xawtv-remote fullscreen + end + begin + prog = irexec + button = chan- + repeat = 1 + config = xawtv-remote setstation prev + end + begin + prog = irexec + button = chan+ + repeat = 1 + config = xawtv-remote setstation next + end + begin + prog = irxevent + button = loop + repeat = 1 + config = Key c xawtv + end + begin + prog = irxevent + button = scan + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = irxevent + button = mute + config = Key a xawtv + end + begin + prog = irxevent + button = vol+ + repeat = 1 + config = Key KP_Add xawtv + end + begin + prog = irxevent + button = vol- + repeat = 1 + config = Key KP_Subtract xawtv + end + begin + prog = irexec + button = 1 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = 2 + config = xawtv-remote setstation 1 + end + begin + prog = irexec + button = 3 + config = xawtv-remote setstation 2 + end + begin + prog = irexec + button = 4 + config = xawtv-remote setstation 3 + end + begin + prog = irexec + button = 5 + config = xawtv-remote setstation 4 + end + begin + prog = irexec + button = 6 + config = xawtv-remote setstation 5 + end + begin + prog = irexec + button = 7 + config = xawtv-remote setstation 6 + end + begin + prog = irexec + button = 8 + config = xawtv-remote setstation 7 + end + begin + prog = irexec + button = 9 + config = xawtv-remote setstation 8 + end + begin + prog = irexec + button = 0 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = function + config = xawtv-remote attr next + end + begin + prog = irexec + button = fn+ + config = xawtv-remote attr inc + end + begin + prog = irexec + button = fn- + config = xawtv-remote attr dec + end + begin + prog = irexec + button = +100 + config = xawtv-remote msg " `date +%H:%M` " + end diff --git a/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 new file mode 100644 index 0000000..e488424 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 @@ -0,0 +1,67 @@ +# +# this config file was automatically generated +# using lirc-0.6.1 on Wed May 24 23:10:08 2000 +# +# contributed by BartOwl <bartowl@dione.ids.pl> +# +# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/ +# model: PV951 (http://www.jsir.com/pv951.htm) +# supported devices: Remote control for this TV-capture card +# +# The manufacturer seems to be ProVideo: http://www.provideo.com.tw +# Funny: they have Linux "drivers" for this card... +# + +begin remote + + name PV951 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9067 4482 + one 597 1650 + zero 597 529 + ptrail 584 + repeat 9068 2232 + pre_data_bits 16 + pre_data 0x61D6 + gap 107983 + repeat_bit 0 + + begin codes + power 0x00000000000048B7 + air/cbl 0x000000000000D02F + pc/tv 0x0000000000008877 + source 0x000000000000F00F + mts 0x000000000000C837 + mute 0x00000000000008F7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + 0 0x00000000000000FF + +100 0x00000000000050AF + ch_rtn 0x000000000000E817 + ch+ 0x00000000000058A7 + ch- 0x0000000000007887 + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + func 0x0000000000009867 + ttx 0x000000000000B04F + pg+ 0x000000000000708F + pg- 0x000000000000B847 + cc 0x0000000000006897 + sync 0x00000000000028D7 + ch+- 0x00000000000018E7 + autoscan 0x00000000000030CF + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id new file mode 100644 index 0000000..4070964 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id @@ -0,0 +1,33 @@ +0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc." +0bc7:0008|SnapStream_Firefly| "SnapStream Firefly" +10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver" +0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder" +0e9c:0000|streamzap| "Streamzap Remote" +0fe9:9010|dvico| "DVICO Remote:" +6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone " +1509:9242|MCEUSB-new| "FIC eHome Infrared Transceiver 1509/9242" +1934:0602|MCEUSB-new| "Fintek eHome Infrared Transceiver 1934/0602" +147a:e015|MCEUSB-new| "Formosa eHome Infrared Transceiver 147a/e015" +147a:e017|MCEUSB-new| "Formosa aim / Trust MCE Infrared Receiver147a/e017" +147a:e018|MCEUSB-new| "Formosa Industrial Computing 147a/e018" +107b:3009|MCEUSB-new| "Gateway eHome Infrared Transceiver 107b/3009" +195d:7002|MCEUSB-new| "Itron ione Libra Q-11 195d/7002" +043e:9803|MCEUSB-new| "LG eHome Infrared Transceiver 043e/9803" +045e:00a0|MCEUSB-new| "Microsoft MCE Infrared Transceiver 045e/00a0" +03ee:2501|MCEUSB-new| "Mitsumi 03ee/2501" +0471:060c|MCEUSB-new| "Philips Infrared Transciever - HP branded 0471/060C" +0471:060d|MCEUSB-new| "Philips SRM5100 0471/060d" +0471:0815|MCEUSB-new| "Philips eHome Infrared Transciever 0471/0815" +2304:0225|MCEUSB-new| "Pinnacle Systems, Inc. 2304/0225" +179d:0010|MCEUSB-new| "Ricavision internal Infrared Transceiver 179d/0010" +1308:c001|MCEUSB-new| "Shuttle eHome Infrared Transceiver 1308/c001" +051c:c001|MCEUSB-new| "Shuttle2 eHome Infrared Transceiver 051c/c001" +0609:031d|MCEUSB-new| "SMK/Toshiba G83C0004D410 0609/031d" +0609:0322|MCEUSB-new| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322" +0609:0334|MCEUSB-new| "SKM bundled with Hauppauge PVR-150 0609/0334" +1460:9150|MCEUSB-new| "Tatung eHome Infrared Transceiver 1460/9150" +1784:0001|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0001" +1784:0006|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0006" +1784:0007|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0007" +1784:0008|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0008" +045e:006d|MCEUSB-old| "USB Microsoft IR Transceiver Driver 045e/006d" diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 new file mode 100644 index 0000000..1797647 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 @@ -0,0 +1,88 @@ +# +# brand: Remotec +# model no. of remote control: BW 6130 Multimedia Master Receiver +# devices being controlled by this remote: +# + +begin remote + + name MEDIAMASTER + bits 32 + eps 0 + aeps 0 + + one 0 0 + zero 0 0 + pre_data_bits 32 + pre_data 0xFFA10003 + gap 131980 + post_data_bits 0 + toggle_bit 0 + + begin codes + PRE 0x23 + NEXT 0x24 + 1 0X10 + 2 0x11 + 3 0x12 + POWER 0x50 + VOL+ 0x30 + VOL- 0x31 + L 0x42 + R 0x44 + PAUSE 0x22 + PLAY 0x20 + STOP 0x21 + MUTE 0x32 + MOUSE_SLOW_N 0x95 + MOUSE_SLOW_NNE 0xd1 + MOUSE_SLOW_NE 0xcd + MOUSE_SLOW_ENE 0xc9 + MOUSE_SLOW_E 0xc5 + MOUSE_SLOW_ESE 0xe9 + MOUSE_SLOW_SE 0xed + MOUSE_SLOW_SSE 0xf1 + MOUSE_SLOW_S 0xb5 + MOUSE_SLOW_SSW 0xb1 + MOUSE_SLOW_SW 0xad + MOUSE_SLOW_WSW 0xa9 + MOUSE_SLOW_W 0x85 + MOUSE_SLOW_WNW 0x89 + MOUSE_SLOW_NW 0x8d + MOUSE_SLOW_NNW 0x91 + MOUSE_MEDIUM_N 0x96 + MOUSE_MEDIUM_NNE 0xd2 + MOUSE_MEDIUM_NE 0xce + MOUSE_MEDIUM_ENE 0xca + MOUSE_MEDIUM_E 0xc6 + MOUSE_MEDIUM_ESE 0xea + MOUSE_MEDIUM_SE 0xee + MOUSE_MEDIUM_SSE 0xf2 + MOUSE_MEDIUM_S 0xb6 + MOUSE_MEDIUM_SSW 0xb2 + MOUSE_MEDIUM_SW 0xae + MOUSE_MEDIUM_WSW 0xaa + MOUSE_MEDIUM_W 0x86 + MOUSE_MEDIUM_WNW 0x8a + MOUSE_MEDIUM_NW 0x8e + MOUSE_MEDIUM_NNW 0x92 + MOUSE_FAST_N 0x97 + MOUSE_FAST_NNE 0xd3 + MOUSE_FAST_NE 0xcf + MOUSE_FAST_ENE 0xcb + MOUSE_FAST_E 0xc7 + MOUSE_FAST_ESE 0xeb + MOUSE_FAST_SE 0xef + MOUSE_FAST_SSE 0xf3 + MOUSE_FAST_S 0xb7 + MOUSE_FAST_SSW 0xb3 + MOUSE_FAST_SW 0xaf + MOUSE_FAST_WSW 0xab + MOUSE_FAST_W 0x87 + MOUSE_FAST_WNW 0x8b + MOUSE_FAST_NW 0x8f + MOUSE_FAST_NNW 0x93 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 new file mode 100644 index 0000000..f056530 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 @@ -0,0 +1,291 @@ +# +# lircmd config file +# simply copied/edited x10/mouseremote lircmd file +# + +PROTOCOL IntelliMouse +#PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +TOGGLE_ACTIVATE MEDIAMASTER 3 + +ACCELERATOR 1 3 2 + + +MOVE_N MEDIAMASTER MOUSE_SLOW_N +MOVE_N MEDIAMASTER MOUSE_SLOW_N + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N + +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N + +MOVE_N MEDIAMASTER MOUSE_SLOW_NNE +MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE + +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE + +MOVE_NE MEDIAMASTER MOUSE_SLOW_NE +MOVE_NE MEDIAMASTER MOUSE_SLOW_NE + +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE + +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE + +MOVE_E MEDIAMASTER MOUSE_SLOW_ENE +MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE + +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE + +MOVE_E MEDIAMASTER MOUSE_SLOW_E +MOVE_E MEDIAMASTER MOUSE_SLOW_E + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E + +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E + +MOVE_E MEDIAMASTER MOUSE_SLOW_ESE +MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE + +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE + +MOVE_SE MEDIAMASTER MOUSE_SLOW_SE +MOVE_SE MEDIAMASTER MOUSE_SLOW_SE + +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE + +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE + +MOVE_S MEDIAMASTER MOUSE_SLOW_SSE +MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE + +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE + +MOVE_S MEDIAMASTER MOUSE_SLOW_S +MOVE_S MEDIAMASTER MOUSE_SLOW_S + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S + +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S + +MOVE_S MEDIAMASTER MOUSE_SLOW_SSW +MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW + +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW + +MOVE_SW MEDIAMASTER MOUSE_SLOW_SW +MOVE_SW MEDIAMASTER MOUSE_SLOW_SW + +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW + +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW + +MOVE_W MEDIAMASTER MOUSE_SLOW_WSW +MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW + +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW + +MOVE_W MEDIAMASTER MOUSE_SLOW_W +MOVE_W MEDIAMASTER MOUSE_SLOW_W + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W + +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W + +MOVE_W MEDIAMASTER MOUSE_SLOW_WNW +MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW + +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW + +MOVE_NW MEDIAMASTER MOUSE_SLOW_NW +MOVE_NW MEDIAMASTER MOUSE_SLOW_NW + +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW + +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW + +MOVE_N MEDIAMASTER MOUSE_SLOW_NNW +MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW + +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW + +BUTTON1_CLICK MEDIAMASTER L +BUTTON3_CLICK MEDIAMASTER R + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem new file mode 100644 index 0000000..da0fb82 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem @@ -0,0 +1,81 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 +# +# contributed by Oliver Stabel (oliver.stabel@gmx.de) +# +# brand: Sasem OnAir +# model no. of remote control: n/a +# devices being controlled by this remote: +# This IR came with the Dign HV5 HTPC case, manufactured +# by Uneed in Korea (www.iuneed.com). +# AFAIK the case is called Ahanix HV5 in the US. +# The IR/VFD device is originally manufactured by Sasem, +# and sold as OnAir Remocon-V (?looks different from +# mine but should be the same?) +# + +begin remote + + name lirc_sasem + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 24 + pre_data 0x0C807F + post_data_bits 24 + post_data 0x000000 + gap 196000 + toggle_bit 0 + + + begin codes + 1 0x08F7 + 2 0x09F6 + 3 0x0AF5 + 4 0x10EF + 5 0x11EE + 6 0x12ED + 7 0x18E7 + 8 0x19E6 + 9 0x1AE5 + start 0x40BF + 0 0x41BE + full_down 0x06F9 + vol- 0x0FF0 + vol+ 0x0EF1 + esc 0x05FA + up 0x0BF4 + close 0x07F8 + left 0x03FC + enter 0x13EC + right 0x1BE4 + prev 0x0CF3 + down 0x43BC + next 0x01FE + mute 0x0DF2 + step 0x04FB + play_pause 0x49B6 + stop 0x48B7 + winamp 0x1EE1 + media_player 0x15EA + hdtv 0x17E8 + cd_player 0x16E9 + win_dvd 0x44BB + power_dvd 0x14EB + internet 0x46B9 + email 0x47B8 + a 0x45BA + b 0x1DE2 + c 0x1CE3 + d 0x1FE0 + eject 0x02FD + power 0x00FF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic new file mode 100644 index 0000000..8aa4ef5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic @@ -0,0 +1,83 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 +# +# contributed by Stefan Neuwirth & Andreas Lange <langsmethanromp@gmx.de> +# +# brand: Sigma Designs +# model: REALmagic remote control +# www.realmagic.com/support.htm#remote +# supported devices: +# "For Hollywood Plus Version 1.4 or above Driver only" +# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card +# receiver is connected to the serial port - it does not require the card +# +# The first byte always is 131. The second and third byte are equal. (CB) +# + +begin remote + + name REALmagic + bits 20 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 10 + pre_data 0x183 + gap 189974 + toggle_bit 0 + + + begin codes + 1 0x0000000000062D8B + 2 0x0000000000012C4B + 3 0x000000000001AC6B + 4 0x0000000000072DCB + 5 0x000000000000AC2B + 6 0x0000000000052D4B + +# Nicolas Vignal reported that this code is sent for his remote +# version (1.5). It should be no problem to just have two entries for +# "6" unless you want to send codes what won't work for this receiver +# anyway. + + 6 0x0000000000041505 + + 7 0x0000000000058561 + 8 0x0000000000044511 + 9 0x000000000004AD2B + 0 0x000000000004C531 + VOL+ 0x0000000000022C8B + VOL- 0x0000000000032CCB + MUTE 0x000000000006ADAB + L-R 0x0000000000052549 + VGA 0x0000000000054551 + ENTER 0x0000000000042509 + QUIT 0x0000000000058D63 + PRG 0x0000000000038CE3 + UP 0x0000000000078DE3 + DOWN 0x0000000000064D93 + LEFT 0x0000000000044D13 + RIGHT 0x000000000003ECFB + SELECT 0x0000000000024C93 + MENU 0x0000000000014C53 + TITLE 0x0000000000054D53 + OSD 0x0000000000034CD3 + LANG 0x0000000000074DD3 + ANGLE 0x000000000000CC33 + SUB 0x000000000004CD33 + PAUSE 0x000000000002CCB3 + STOP 0x000000000006CDB3 + PLAY 0x000000000001CC73 + EJECT 0x000000000005CD73 + REV 0x000000000003CCF3 + FF 0x000000000007CDF3 + PREV 0x0000000000002C0B + NEXT 0x0000000000042D0B + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek new file mode 100644 index 0000000..090afb9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek @@ -0,0 +1,97 @@ +# +# +# contributed by Krister Wicksell <krister.wicksell@spray.se> +# +# brand: Silitek +# model: SM-1000 +# supported devices: +# + +begin remote + + name SILITEK_SM-1000 + bits 24 + repeat_bit 0 + + begin codes + MOUSE_E 0x0000000000aa0001 + MOUSE_NEE 0x0000000000aa0102 + MOUSE_NE 0x0000000000aa0103 + MOUSE_NNE 0x0000000000aa0104 + MOUSE_N 0x0000000000aa0105 + MOUSE_NNW 0x0000000000aa1104 + MOUSE_NW 0x0000000000aa1103 + MOUSE_NWW 0x0000000000aa1102 + MOUSE_W 0x0000000000aa1001 + MOUSE_SWW 0x0000000000aa1002 + MOUSE_SW 0x0000000000aa1003 + MOUSE_SSW 0x0000000000aa1004 + MOUSE_S 0x0000000000aa0005 + MOUSE_SSE 0x0000000000aa0004 + MOUSE_SE 0x0000000000aa0003 + MOUSE_SEE 0x0000000000aa0002 + MOUSE_R_BUTTON 0x0000000000aaa0bb + MOUSE_L_BUTTON 0x0000000000aa0abb + MOUSE_L+R_BUTTON 0x0000000000aaaabb + + 0 0x0000000000bb4a75 + 1 0x0000000000bbc1fe + 2 0x0000000000bbc2fd + 3 0x0000000000bb437c + 4 0x0000000000bbc4fb + 5 0x0000000000bb457a + 6 0x0000000000bb4679 + 7 0x0000000000bbc7f8 + 8 0x0000000000bbc8f7 + 9 0x0000000000bb4976 + * 0x0000000000bbcbf4 + # 0x0000000000bb4c73 + REW 0x0000000000bb516e + FWD 0x0000000000bbd0ef + PAUSE 0x0000000000bbcef1 + PLAY 0x0000000000bbcdf2 + STOP 0x0000000000bb4f70 + VOLUME_UP 0x0000000000bbd3ec + VOLUME_DOWN 0x0000000000bb546b + MUTE 0x0000000000bb526d + DISPLAY 0x0000000000bbd5ea + CD 0x0000000000bbdae5 + SHOW_WIZ 0x0000000000bb5b64 + PG_UP 0x0000000000bbd6e9 + PG_DN 0x0000000000bb5768 + BACK 0x0000000000bb5867 + FORWARD 0x0000000000bbd9e6 + WWW 0x0000000000bbdce3 + CLOSE 0x0000000000bb5d62 + + 0_UP 0x0000000000cc4a75 + 1_UP 0x0000000000ccc1fe + 2_UP 0x0000000000ccc2fd + 3_UP 0x0000000000cc437c + 4_UP 0x0000000000ccc4fb + 5_UP 0x0000000000cc457a + 6_UP 0x0000000000cc4679 + 7_UP 0x0000000000ccc7f8 + 8_UP 0x0000000000ccc8f7 + 9_UP 0x0000000000cc4976 + *_UP 0x0000000000cccbf4 + #_UP 0x0000000000cc4c73 + REW_UP 0x0000000000cc516e + FWD_UP 0x0000000000ccd0ef + PAUSE_UP 0x0000000000cccef1 + PLAY_UP 0x0000000000cccdf2 + STOP_UP 0x0000000000cc4f70 + VOLUME_UP_UP 0x0000000000ccd3ec + VOLUME_DOWN_UP 0x0000000000cc546b + MUTE_UP 0x0000000000cc526d + DISPLAY_UP 0x0000000000ccd5ea + CD_UP 0x0000000000ccdae5 + SHOW_WIZ_UP 0x0000000000cc5b64 + PG_UP_UP 0x0000000000ccd6e9 + PG_DN_UP 0x0000000000cc5768 + BACK_UP 0x0000000000cc5867 + FORWARD_UP 0x0000000000ccd9e6 + WWW_UP 0x0000000000ccdce3 + CLOSE_UP 0x0000000000cc5d62 + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek new file mode 100644 index 0000000..fc93f79 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek @@ -0,0 +1,72 @@ +# +# lircmd config file for the Silitek control +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 4 2 + +#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ + +MOVE_N SILITEK_SM-1000 MOUSE_N +MOVE_N SILITEK_SM-1000 MOUSE_N + +MOVE_N SILITEK_SM-1000 MOUSE_NNE +MOVE_NE SILITEK_SM-1000 MOUSE_NNE + +MOVE_NE SILITEK_SM-1000 MOUSE_NE +MOVE_NE SILITEK_SM-1000 MOUSE_NE + +MOVE_E SILITEK_SM-1000 MOUSE_NEE +MOVE_NE SILITEK_SM-1000 MOUSE_NEE + +MOVE_E SILITEK_SM-1000 MOUSE_E +MOVE_E SILITEK_SM-1000 MOUSE_E + +MOVE_E SILITEK_SM-1000 MOUSE_SEE +MOVE_SE SILITEK_SM-1000 MOUSE_SEE + +MOVE_SE SILITEK_SM-1000 MOUSE_SE +MOVE_SE SILITEK_SM-1000 MOUSE_SE + +MOVE_S SILITEK_SM-1000 MOUSE_SSE +MOVE_SE SILITEK_SM-1000 MOUSE_SSE + +MOVE_S SILITEK_SM-1000 MOUSE_S +MOVE_S SILITEK_SM-1000 MOUSE_S + +MOVE_S SILITEK_SM-1000 MOUSE_SSW +MOVE_SW SILITEK_SM-1000 MOUSE_SSW + +MOVE_SW SILITEK_SM-1000 MOUSE_SW +MOVE_SW SILITEK_SM-1000 MOUSE_SW + +MOVE_W SILITEK_SM-1000 MOUSE_SWW +MOVE_SW SILITEK_SM-1000 MOUSE_SWW + +MOVE_W SILITEK_SM-1000 MOUSE_W +MOVE_W SILITEK_SM-1000 MOUSE_W + +MOVE_W SILITEK_SM-1000 MOUSE_NWW +MOVE_NW SILITEK_SM-1000 MOUSE_NWW + +MOVE_NW SILITEK_SM-1000 MOUSE_NW +MOVE_NW SILITEK_SM-1000 MOUSE_NW + +MOVE_N SILITEK_SM-1000 MOUSE_NNW +MOVE_NW SILITEK_SM-1000 MOUSE_NNW + +MOVE_IN SILITEK_SM-1000 PG_UP +MOVE_OUT SILITEK_SM-1000 PG_DN + +BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY +#BUTTON2_TOGGLE SILITEK_SM-1000 5 +#BUTTON3_TOGGLE SILITEK_SM-1000 6 + +BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON +BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON +BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf new file mode 100644 index 0000000..288bb51 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf @@ -0,0 +1,127 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005 +# +# contributed by +# +# brand: Snapstream Firefly Remote +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + +name Snapstream_Firefly +bits 40 +eps 30 +aeps 100 + +one 0 0 +zero 0 0 +gap 219964 +toggle_bit 0 + + +begin codes +MAXI 0x0000001481AC0000 +MAXI 0x00000014012C0000 +CLOSE 0x00000014D7020000 +CLOSE 0x0000001457820000 +1 0x00000014628D0000 +1 0x00000014E20D0000 +2 0x00000014E30E0000 +2 0x00000014638E0000 +3 0x00000014648F0000 +3 0x00000014E40F0000 +4 0x00000014E5100000 +4 0x0000001465900000 +5 0x0000001466910000 +5 0x00000014E6110000 +6 0x00000014E7120000 +6 0x0000001467920000 +7 0x0000001468930000 +7 0x00000014E8130000 +8 0x00000014E9140000 +8 0x0000001469940000 +9 0x000000146A950000 +9 0x00000014EA150000 +0 0x00000014EC170000 +0 0x000000146C970000 +BACK 0x000000146B960000 +BACK 0x00000014EB160000 +ENT 0x00000014ED180000 +ENT 0x000000146D980000 +VOL+ 0x000000145E890000 +VOL+ 0x00000014DE090000 +VOL- 0x000000145D880000 +VOL- 0x00000014DD080000 +MUTE 0x000000145F8A0000 +MUTE 0x00000014DF0A0000 +FIREFLY 0x0000001455800000 +FIREFLY 0x00000014D5000000 +CH+ 0x00000014608B0000 +CH+ 0x00000014E00B0000 +CH- 0x00000014618C0000 +CH- 0x00000014E10C0000 +INFO 0x0000001483AE0000 +INFO 0x00000014032E0000 +OPTION 0x0000001484AF0000 +OPTION 0x00000014042F0000 +UP 0x000000146F9A0000 +UP 0x00000014EF1A0000 +LEFT 0x00000014729D0000 +LEFT 0x00000014F21D0000 +DOWN 0x0000001477A20000 +DOWN 0x00000014F7220000 +RIGHT 0x00000014749F0000 +RIGHT 0x00000014F41F0000 +OK 0x00000014739E0000 +OK 0x00000014F31E0000 +MENU 0x00000014719C0000 +MENU 0x00000014F11C0000 +EXIT 0x0000001475A00000 +EXIT 0x00000014F5200000 +REC 0x00000014FC270000 +REC 0x000000147CA70000 +PLAY 0x00000014FA250000 +PLAY 0x000000147AA50000 +STOP 0x00000014FD280000 +STOP 0x000000147DA80000 +REW 0x00000014F9240000 +REW 0x0000001479A40000 +FWD 0x00000014FB260000 +FWD 0x000000147BA60000 +PREV 0x00000014002B0000 +PREV 0x0000001480AB0000 +PAUSE 0x00000014FE290000 +PAUSE 0x000000147EA90000 +NEXT 0x00000014FF2A0000 +NEXT 0x000000147FAA0000 +MUSIC 0x00000014DB060000 +MUSIC 0x000000145B860000 +PHOTOS 0x00000014DA050000 +PHOTOS 0x000000145A850000 +DVD 0x00000014D9040000 +DVD 0x0000001459840000 +TV 0x00000014D8030000 +TV 0x0000001458830000 +VIDEO 0x00000014DC070000 +VIDEO 0x000000145C870000 +HELP 0x00000014D6010000 +HELP 0x0000001456810000 +MOUSE 0x00000014022D0000 +MOUSE 0x0000001482AD0000 +A 0x00000014EE190000 +A 0x000000146E990000 +B 0x00000014F01B0000 +B 0x00000014709B0000 +C 0x00000014F6210000 +C 0x0000001476A10000 +D 0x00000014F8230000 +D 0x0000001478A30000 + +end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt new file mode 100644 index 0000000..e918011 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt @@ -0,0 +1,590 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the new grey Hauppauge remote +# +# Modified from Jarod Wilson's which came from Jeff Campbell's +# By Brad Templeton + + +# Here we have the jump point commands. They only work if you have +# defined function keys for these jump points. For me the most +# common command is the menu of recordings, so I put that on "videos" +# even though that's counter-intuitive + +begin +prog = mythtv +button = TV +repeat = 3 +config = F5 +end + +begin +prog = mythtv +button = Videos +repeat = 3 +config = F2 +end + +# Not yet defined +begin +prog = mythtv +button = Music +repeat = 3 +config = Up +end + +# Given another function for now, I don't use mythgallery +begin +prog = mythtv +button = Pictures +repeat = 3 +config = F +end + +begin +prog = mythtv +button = Guide +repeat = 3 +config = F3 +end + +# I stuck the "todo" list on here as Myth has no radio function +begin +prog = mythtv +button = Radio +repeat = 3 +config = F4 +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = LEFT +repeat = 3 +config = Left +end + +begin +prog = mythtv +button = RIGHT +repeat = 3 +config = Right +end + +# Channel Up +begin +prog = mythtv +button = Channel-UP +repeat = 3 +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Channel-DOWN +repeat = 3 +config = Down +end + +# OK/Select +begin +prog = mythtv +button = Ok +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = I +end + +# Escape/Exit/Back +begin +prog = mythtv +button = BACK +config = Esc +end + +# Power Off/Exit +begin +prog = mythtv +button = POWER +config = Esc +end + + +# Pause +begin +prog = mythtv +button = Pause +repeat = 3 +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +repeat = 3 +config = | +end + +# Fast forward (30 sec default) +begin +prog = mythtv +button = Rewind +repeat = 3 +config = PgUp +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Forward +repeat = 3 +config = PgDown +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Next +repeat = 3 +config = End +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Previous +repeat = 3 +config = Home +end + +# Record +begin +prog = mythtv +button = Record +repeat = 3 +config = R +end + +# Delete +begin +prog = mythtv +button = Red +repeat = 3 +config = D +end + +# Decrease play speed +begin +prog = mythtv +button = Green +repeat = 3 +config = J +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Menu +repeat = 3 +config = M +end + +# Scroll up +begin +prog = mythtv +button = Volume-UP +repeat = 3 +config = F11 +end + +# Scroll down +begin +prog = mythtv +button = Volume-DOWN +repeat = 3 +config = F10 +end + +# Bring up OSD info +begin +prog = mythtv +button = Go +repeat = 3 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = Prev-Channel +repeat = 3 +config = W +end + +# double speed watch +begin +prog = mythtv +button = Yellow +repeat = 3 +config = J +end + +# change tuners +#begin +#prog = mythtv +#button = hash +#repeat = 3 +#config = Y +#end + +# Bring up Time stretch +begin +prog = mythtv +button = Blue +repeat = 3 +config = Y +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +repeat = 3 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 3 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 3 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 3 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 3 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 3 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 3 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 3 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 3 +config = 9 +end + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = MENU +repeat = 3 +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +repeat = 3 +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = PLAY +repeat = 3 +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = Back +repeat = 3 +config = quit +end + +# Mute +begin +prog = mplayer +button = MUTE +repeat = 3 +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = LEFT +repeat = 3 +config = seek -7 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = RIGHT +repeat = 3 +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = EXIT +repeat = 3 +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = SKIP +repeat = 3 +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = REPLAY +repeat = 3 +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULL +repeat = 3 +config = vo_fullscreen +end + +### Xine lirc setup + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = OFF +repeat = 3 +config = Quit +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = CH+ +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = CH- +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = VOL- +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = VOL+ +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = BACK +repeat = 3 +config = Menu +end + +begin +prog = xine +button = FFW +repeat = 3 +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = REW +repeat = 3 +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = FULL +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = BLANK +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = SKIP +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = REPLAY +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = GO +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = RED +repeat = 3 +config = Quit +end + +begin +prog = xine +button = RED +repeat = 3 +config = Quit +end
\ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg Binary files differnew file mode 100644 index 0000000..a1fbc6e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap new file mode 100644 index 0000000..8e453b9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap @@ -0,0 +1,69 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc new file mode 100755 index 0000000..5e668b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc @@ -0,0 +1,832 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 4 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +end + +begin +prog = mythtv +button = OK +config = Return +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +end + +begin +prog = mythtv +button = EXIT +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = Space +end + +begin +prog = mythtv +button = PAUSE +config = p +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +end + +begin +prog = mythtv +button = RECORD +config = r +end + +begin +prog = mythtv +# rewind +button = << +config = Home +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = i +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg Binary files differnew file mode 100644 index 0000000..4d1a5fe --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI new file mode 100644 index 0000000..6dd84f9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI @@ -0,0 +1,42 @@ +# +# this config file was automatically generated +# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000 +# +# contributed by Peter Schlaf +# +# brand: Technisat +# model: +# supported devices: MediaFocus PC card +# + +begin remote + + name TECHNISAT + bits 10 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 150 + + one 141 7590 + zero 141 5090 + ptrail 141 + pre_data_bits 1 + pre_data 0x1 + gap 121440 + repeat_bit 0 + toggle_bit 2 + + frequency 38000 + duty_cycle 33 + + begin codes + MUTE 0x0000000000000046 + VOL+ 0x000000000000006E + VOL- 0x000000000000006F + CH+ 0x0000000000000047 + CH- 0x0000000000000048 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 new file mode 100644 index 0000000..9562f60 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 @@ -0,0 +1,48 @@ +# +# This is for the remote that Tekram bundles with its M230 card (Mach64) +# Commands from the remote are hardware-decoded +# +# contributed by Froenchenko Leonid <lfroen@galileo.co.il> +# +# brand: Tekram M230 (ATI Mach64) +# supported devices: This remote control comes with TV Tuner cards from +# Tekram based on ATI 264VT (btt829) +# + +begin remote + name M230 + bits 8 + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + RECALL 0x0A + ENTER 0x17 + POWER 0x1C + SOURCE 0x15 + PC_VID 0x12 + STILL 0x11 + TTX 0x0F + FAV 0x13 + MUTE 0x10 + VOL_UP 0x1A + VOL_DN 0x1E + CH_UP 0x1B + CH_DN 0x1F + PLAY 0x0D + STOP 0x0E + REW 0x1D + FFW 0x19 + ADD_ER 0x16 + FUNC 0x14 + F_PLUS 0x18 + F_MINUS 0x0C + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 new file mode 100644 index 0000000..0bacf5d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 @@ -0,0 +1,33 @@ +# +# lircmd config file for Tekram remote control +# Contributed by Froenchenko Leonid <lfroen@galileo.co.il> +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +#ACCELERATOR 2 30 5 + +ACTIVATE * MOUSE_MODE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_UP +MOVE_OUT * VOL_DN + +BUTTON1_CLICK * RECALL +BUTTON2_CLICK * 0 +BUTTON3_CLICK * ENTER + +BUTTON1_TOGGLE * PLAY +BUTTON2_TOGGLE * STOP +BUTTON3_TOGGLE * REW diff --git a/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote new file mode 100644 index 0000000..73df340 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote @@ -0,0 +1,116 @@ +# +# +# contributed by Isaac Lauer +# modified by Shawn Nycz +# modified by Brian Craft +# +# brand: X10 +# model: MP3 MouseRemote, Model mk19a +# + +begin remote + + name mouseremote + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x08 + post_data_bits 8 + post_data 0x7f + min_repeat 2 + gap 140000 + + begin codes + POWER 0x000000000000000F + PC 0x000000000000002B + LAST 0x000000000000004F + CHANUP 0x0000000000000002 + CHANDOWN 0x0000000000000003 + VOLUP 0x0000000000000006 + VOLDOWN 0x0000000000000007 + MUTE 0x0000000000000005 + 1 0x0000000000000041 + 2 0x0000000000000042 + 3 0x0000000000000043 + 4 0x0000000000000044 + 5 0x0000000000000045 + 6 0x0000000000000046 + 7 0x0000000000000047 + 8 0x0000000000000048 + 9 0x0000000000000049 + 0 0x0000000000000040 + ENTER 0x000000000000004a + ADOTB 0x000000000000005D + REWIND 0x000000000000001C + PLAY 0x000000000000000D + FFWD 0x000000000000001D + STOP 0x000000000000000E + PAUSE 0x000000000000004E + RECORD 0x00000000000000FF + ENTER 0x000000000000004A + LAST 0x000000000000004F + DISP 0x000000000000005C + SHIFT 0x000000000000006B + GUIDE 0x000000000000006D + SELECT 0x0000000000000093 + PHONE 0x000000000000004B + WEB 0x000000000000008B + CD 0x00000000000000AB + DVD 0x00000000000000CB + MOUSE_SLOW_N 0x0000000000000110 + MOUSE_SLOW_NNE 0x0000000000000131 + MOUSE_SLOW_NE 0x0000000000000111 + MOUSE_SLOW_ENE 0x0000000000000113 + MOUSE_SLOW_E 0x0000000000000101 + MOUSE_SLOW_ESE 0x0000000000000193 + MOUSE_SLOW_SE 0x0000000000000191 + MOUSE_SLOW_SSE 0x00000000000001B1 + MOUSE_SLOW_S 0x0000000000000190 + MOUSE_SLOW_SSW 0x00000000000001B9 + MOUSE_SLOW_SW 0x0000000000000199 + MOUSE_SLOW_WSW 0x000000000000019B + MOUSE_SLOW_W 0x0000000000000109 + MOUSE_SLOW_WNW 0x000000000000011B + MOUSE_SLOW_NW 0x0000000000000119 + MOUSE_SLOW_NNW 0x0000000000000139 + MOUSE_MEDIUM_N 0x0000000000000310 + MOUSE_MEDIUM_NNE 0x0000000000000331 + MOUSE_MEDIUM_NE 0x0000000000000311 + MOUSE_MEDIUM_ENE 0x0000000000000313 + MOUSE_MEDIUM_E 0x0000000000000301 + MOUSE_MEDIUM_ESE 0x0000000000000393 + MOUSE_MEDIUM_SE 0x0000000000000391 + MOUSE_MEDIUM_SSE 0x00000000000003B1 + MOUSE_MEDIUM_S 0x0000000000000390 + MOUSE_MEDIUM_SSW 0x00000000000003B9 + MOUSE_MEDIUM_SW 0x0000000000000399 + MOUSE_MEDIUM_WSW 0x000000000000039B + MOUSE_MEDIUM_W 0x0000000000000309 + MOUSE_MEDIUM_WNW 0x000000000000031B + MOUSE_MEDIUM_NW 0x0000000000000319 + MOUSE_MEDIUM_NNW 0x0000000000000339 + MOUSE_FAST_N 0x0000000000000510 + MOUSE_FAST_NNE 0x0000000000000531 + MOUSE_FAST_NE 0x0000000000000511 + MOUSE_FAST_ENE 0x0000000000000513 + MOUSE_FAST_E 0x0000000000000501 + MOUSE_FAST_ESE 0x0000000000000593 + MOUSE_FAST_SE 0x0000000000000591 + MOUSE_FAST_SSE 0x00000000000005B1 + MOUSE_FAST_S 0x0000000000000590 + MOUSE_FAST_SSW 0x00000000000005B9 + MOUSE_FAST_SW 0x0000000000000599 + MOUSE_FAST_WSW 0x000000000000059B + MOUSE_FAST_W 0x0000000000000509 + MOUSE_FAST_WNW 0x000000000000051B + MOUSE_FAST_NW 0x0000000000000519 + MOUSE_FAST_NNW 0x0000000000000539 + BUTTONR_DOWN 0x0000000000000801 + BUTTONL_DOWN 0x0000000000000804 + BUTTON_UP 0x0000000000000800 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere new file mode 100644 index 0000000..c9bb727 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere @@ -0,0 +1,64 @@ +# +# +# contributed by Isaac Lauer +# modified by Shawn Nycz +# +# brand: X10 +# model: MP3 Anywhere Remote, Model UR81A +# supported devices: at least FireCracker Receiver Model MR26A, maybe more +# + +begin remote + + name mp3anywhere + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + pre_data_bits 24 + pre_data 0xD5AAEE + min_repeat 2 + gap 140000 + + begin codes + POWER 0x00000000000000F0 + PC 0x00000000000000D4 + LAST 0x00000000000000F2 + CHANUP 0x0000000000000040 + CHANDOWN 0x00000000000000C0 + VOLUP 0x0000000000000060 + VOLDOWN 0x00000000000000E0 + MUTE 0x00000000000000A0 + ONE 0x0000000000000082 + TWO 0x0000000000000042 + THREE 0x00000000000000C2 + FOUR 0x0000000000000022 + FIVE 0x00000000000000A2 + SIX 0x0000000000000062 + SEVEN 0x00000000000000E2 + EIGHT 0x0000000000000012 + NINE 0x0000000000000092 + ZERO 0x0000000000000002 + ENTER 0x0000000000000052 + ADOTB 0x00000000000000BA + A 0x000000000000003A + B 0x00000000000000D8 + C 0x00000000000000D6 + D 0x00000000000000D4 + MENU 0x00000000000000B6 + EXIT 0x00000000000000C9 + UP 0x00000000000000D5 + DOWN 0x00000000000000D3 + LEFT 0x00000000000000D2 + RIGHT 0x00000000000000D1 + OK 0x0000000000000052 + REWIND 0x0000000000000038 + PLAY 0x00000000000000B0 + FFWD 0x00000000000000B8 + RECORD 0x00000000000000FF + STOP 0x0000000000000070 + PAUSE 0x0000000000000072 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote new file mode 100644 index 0000000..c3c23b1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote @@ -0,0 +1,288 @@ +# +# lircmd config file for the mouseremote control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + +MOVE_N mouseremote MOUSE_SLOW_N +MOVE_N mouseremote MOUSE_SLOW_N + +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N + +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N + +MOVE_N mouseremote MOUSE_SLOW_NNE +MOVE_NE mouseremote MOUSE_SLOW_NNE + +MOVE_N mouseremote MOUSE_MEDIUM_NNE +MOVE_NE mouseremote MOUSE_MEDIUM_NNE +MOVE_N mouseremote MOUSE_MEDIUM_NNE +MOVE_NE mouseremote MOUSE_MEDIUM_NNE + +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE + +MOVE_NE mouseremote MOUSE_SLOW_NE +MOVE_NE mouseremote MOUSE_SLOW_NE + +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE + +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE + +MOVE_E mouseremote MOUSE_SLOW_ENE +MOVE_NE mouseremote MOUSE_SLOW_ENE + +MOVE_E mouseremote MOUSE_MEDIUM_ENE +MOVE_NE mouseremote MOUSE_MEDIUM_ENE +MOVE_E mouseremote MOUSE_MEDIUM_ENE +MOVE_NE mouseremote MOUSE_MEDIUM_ENE + +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE + +MOVE_E mouseremote MOUSE_SLOW_E +MOVE_E mouseremote MOUSE_SLOW_E + +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E + +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E + +MOVE_E mouseremote MOUSE_SLOW_ESE +MOVE_SE mouseremote MOUSE_SLOW_ESE + +MOVE_E mouseremote MOUSE_MEDIUM_ESE +MOVE_SE mouseremote MOUSE_MEDIUM_ESE +MOVE_E mouseremote MOUSE_MEDIUM_ESE +MOVE_SE mouseremote MOUSE_MEDIUM_ESE + +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE + +MOVE_SE mouseremote MOUSE_SLOW_SE +MOVE_SE mouseremote MOUSE_SLOW_SE + +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE + +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE + +MOVE_S mouseremote MOUSE_SLOW_SSE +MOVE_SE mouseremote MOUSE_SLOW_SSE + +MOVE_S mouseremote MOUSE_MEDIUM_SSE +MOVE_SE mouseremote MOUSE_MEDIUM_SSE +MOVE_S mouseremote MOUSE_MEDIUM_SSE +MOVE_SE mouseremote MOUSE_MEDIUM_SSE + +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE + +MOVE_S mouseremote MOUSE_SLOW_S +MOVE_S mouseremote MOUSE_SLOW_S + +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S + +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S + +MOVE_S mouseremote MOUSE_SLOW_SSW +MOVE_SW mouseremote MOUSE_SLOW_SSW + +MOVE_S mouseremote MOUSE_MEDIUM_SSW +MOVE_SW mouseremote MOUSE_MEDIUM_SSW +MOVE_S mouseremote MOUSE_MEDIUM_SSW +MOVE_SW mouseremote MOUSE_MEDIUM_SSW + +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW + +MOVE_SW mouseremote MOUSE_SLOW_SW +MOVE_SW mouseremote MOUSE_SLOW_SW + +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW + +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW + +MOVE_W mouseremote MOUSE_SLOW_WSW +MOVE_SW mouseremote MOUSE_SLOW_WSW + +MOVE_W mouseremote MOUSE_MEDIUM_WSW +MOVE_SW mouseremote MOUSE_MEDIUM_WSW +MOVE_W mouseremote MOUSE_MEDIUM_WSW +MOVE_SW mouseremote MOUSE_MEDIUM_WSW + +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW + +MOVE_W mouseremote MOUSE_SLOW_W +MOVE_W mouseremote MOUSE_SLOW_W + +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W + +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W + +MOVE_W mouseremote MOUSE_SLOW_WNW +MOVE_NW mouseremote MOUSE_SLOW_WNW + +MOVE_W mouseremote MOUSE_MEDIUM_WNW +MOVE_NW mouseremote MOUSE_MEDIUM_WNW +MOVE_W mouseremote MOUSE_MEDIUM_WNW +MOVE_NW mouseremote MOUSE_MEDIUM_WNW + +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW + +MOVE_NW mouseremote MOUSE_SLOW_NW +MOVE_NW mouseremote MOUSE_SLOW_NW + +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW + +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW + +MOVE_N mouseremote MOUSE_SLOW_NNW +MOVE_NW mouseremote MOUSE_SLOW_NNW + +MOVE_N mouseremote MOUSE_MEDIUM_NNW +MOVE_NW mouseremote MOUSE_MEDIUM_NNW +MOVE_N mouseremote MOUSE_MEDIUM_NNW +MOVE_NW mouseremote MOUSE_MEDIUM_NNW + +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW + +BUTTON1_DOWN mouseremote BUTTONL_DOWN +BUTTON2_DOWN mouseremote BUTTONR_DOWN + +BUTTON1_UP mouseremote BUTTON_UP +BUTTON2_UP mouseremote BUTTON_UP diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.home b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home new file mode 100755 index 0000000..b850a7d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home @@ -0,0 +1,10 @@ +[home] + path = /data/home/mythtv/ + public = yes + only guest = yes + writeable = yes + printable = no + force user = mythtv + force group = mythtv + create mask = 0755 + diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.media b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media new file mode 100755 index 0000000..6a4ec91 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media @@ -0,0 +1,10 @@ +[media] + path = /data/media + public = yes + only guest = yes + writeable = yes + printable = no + force user = mythtv + force group = mythtv + create mask = 0755 + diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.template b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template new file mode 100644 index 0000000..42ddb99 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template @@ -0,0 +1,125 @@ +# +#======================= Global Settings ===================================== +[global] + + workgroup = home_lan + server string = MythVantage + +# Security mode. Defines in which mode Samba will operate. Possible +# values are share, user, server, domain and ads. Most people will want +# user level security. See the Samba-HOWTO-Collection for details. + security = share + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + + load printers = no + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Use password server option only with security = server +# The argument list may include: +# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] +# or to auto-locate the domain controller/s +# password server = * +; password server = <NT-Server-Name> + +# Use the realm option only with security = ads +# Specifies the Active Directory realm the host is part of +; realm = MY_REALM + +# Backend to store user information in. New installations should +# use either tdbsam or ldapsam. smbpasswd is available for backwards +# compatibility. tdbsam requires no further configuration. +; passdb backend = tdbsam + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting. +# Note: Consider carefully the location in the configuration file of +# this line. The included file is read at that point. +; include = /usr/local/samba/lib/smb.conf.%m + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The default is NO. + dns proxy = no + +# These scripts are used on a domain controller or stand-alone +# machine to add or delete corresponding unix accounts +; add user script = /usr/sbin/useradd %u +; add group script = /usr/sbin/groupadd %g +; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u +; delete user script = /usr/sbin/userdel %u +; delete user from group script = /usr/sbin/deluser %u %g +; delete group script = /usr/sbin/groupdel %g + + +#============================ Share Definitions ============================== + + diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt new file mode 100644 index 0000000..f82f2d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt @@ -0,0 +1,209 @@ +context action description keylist hostname +Music FFWD Fast forward PgDown REPLACEME +Music STOP Stop playback O REPLACEME +Music MUTE Mute |,\\\\,F9 REPLACEME +Gallery SCROLLUP Scroll image up 2 REPLACEME +Music VOLUMEDOWN Volume down [,{,F10 REPLACEME +Music VOLUMEUP Volume up ],},F11 REPLACEME +qt DELETE Delete D REPLACEME +Music RWND Rewind PgUp REPLACEME +qt EDIT Edit E REPLACEME +Music PAUSE Pause/Start playback P REPLACEME +Gallery RECENTER Recenter image 5 REPLACEME +Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME +Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME +Gallery SCROLLRIGHT Scroll image right 6 REPLACEME +Gallery MENU Toggle activating menu in thumbnail view M REPLACEME +Gallery SCROLLDOWN Scroll image down 8 REPLACEME +Gallery ZOOMIN Zoom image in 9 REPLACEME +Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME +Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME +Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME +Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME +Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME +Gallery END Go to the last image in thumbnail view End REPLACEME +Gallery HOME Go to the first image in thumbnail view Home REPLACEME +Gallery SCROLLLEFT Scroll image left 4 REPLACEME +Gallery PLAY Start/Stop Slideshow P REPLACEME +NetFlix REMOVE Removes movie from queue D REPLACEME +Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME +Gallery ZOOMOUT Zoom image out 7 REPLACEME +NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME +Global DOWN Down Arrow Down REPLACEME +ITV Menu MENUTEXT Menu Text F7 REPLACEME +ITV Menu TEXTEXIT Menu Exit F6 REPLACEME +Global LEFT Left Arrow Left REPLACEME +Global RIGHT Right Arrow Right REPLACEME +Global UP Up Arrow Up REPLACEME +Global MENU Pop-up menu M REPLACEME +Global PREVVIEW Previous View Home REPLACEME +Global ESCAPE Escape Esc REPLACEME +Global PAGEUP Page Up PgUp REPLACEME +Global SELECT Select Return,Enter,Space REPLACEME +Global HELP Help F1 REPLACEME +Global INFO More information I REPLACEME +Global NEXTVIEW Next View End REPLACEME +ITV Menu MENUBLUE Menu Blue F5 REPLACEME +Global PAGEDOWN Page Down PgDown REPLACEME +Global EJECT Eject Removable Media REPLACEME +Global 3 3 3 REPLACEME +Global 1 1 1 REPLACEME +Global 6 6 6 REPLACEME +Global 0 0 0 REPLACEME +Global 2 2 2 REPLACEME +Global 4 4 4 REPLACEME +TV Frontend DELETE Delete Program D REPLACEME +Global 8 8 8 REPLACEME +Global 7 7 7 REPLACEME +TV Frontend PAGEDOWN Page Down 9 REPLACEME +TV Frontend PAGEUP Page Up 3 REPLACEME +Global 5 5 5 REPLACEME +TV Frontend CHANGERECGROUP Change Recording Group REPLACEME +Global 9 9 9 REPLACEME +Video END Go to the last video End REPLACEME +Video INCPARENT Increase Parental Level ],},F11 REPLACEME +Weather PAUSE Pause current page P REPLACEME +TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME +Video BROWSE Change browsable in video manager B REPLACEME +Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME +Video HOME Go to the first video Home REPLACEME +Video FILTER Open video filter dialog F REPLACEME +Welcome STARTXTERM Open an Xterm window F12 REPLACEME +Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music BLANKSCR Blank screen 5 REPLACEME +Video DELETE Delete video D REPLACEME +Music THMBUP Increase rating 9 REPLACEME +Music CYCLEVIS Cycle visualizer mode 6 REPLACEME +Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME +Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +TV Frontend PLAYBACK Play Program P REPLACEME +News FORCERETRIEVE Force update news items M REPLACEME +Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME +News RETRIEVENEWS Update news items I REPLACEME +News CANCEL Cancel news item updating C REPLACEME +Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME +Teletext Menu MENUWHITE Menu White F6 REPLACEME +ITV Menu MENURED Menu Red F2 REPLACEME +ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME +ITV Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME +Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME +Teletext Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME +Teletext Menu MENUBLUE Menu Blue F5 REPLACEME +Teletext Menu TOGGLETT Toggle Teletext T REPLACEME +Teletext Menu NEXTPAGE Next Page Down REPLACEME +TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME +TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME +TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME +TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME +Teletext Menu MENURED Menu Red F2 REPLACEME +TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME +Teletext Menu PREVPAGE Previous Page Up REPLACEME +TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME +TV Playback PLAY Play Ctrl+P REPLACEME +TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME +TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME +TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME +TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME +TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME +TV Playback FINDER Show the Program Finder # REPLACEME +TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME +TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME +TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME +TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME +TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME +TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME +TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME +TV Playback SPEEDINC Increase the playback speed U REPLACEME +TV Playback STRETCHDEC Decrease time stretch speed REPLACEME +TV Playback SPEEDDEC Decrease the playback speed J REPLACEME +TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME +TV Playback GUIDE Show the Program Guide S REPLACEME +TV Playback JUMPPREV Jump to previously played recording REPLACEME +TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME +TV Playback STRETCHINC Increase time stretch speed REPLACEME +TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME +TV Playback PREVCC708 Previous ATSC CC track REPLACEME +TV Playback NEXTCC708 Next ATSC CC track REPLACEME +TV Playback NEXTCC Next of any captions REPLACEME +TV Playback NEXTSCAN Next video scan overidemode REPLACEME +TV Playback NEXTCC608 Next VBI CC track REPLACEME +TV Playback PREVCC608 Previous VBI CC track REPLACEME +TV Playback PREVAUDIO Previous audio track - REPLACEME +TV Playback PREVSUBTITLE Previous subtitle track REPLACEME +TV Playback NEXTSUBTITLE Next subtitle track REPLACEME +TV Playback NEXTAUDIO Next audio track + REPLACEME +TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME +TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME +TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME +TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME +TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME +TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME +TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME +TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME +TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME +TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME +TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME +TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME +TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME +TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME +TV Playback SWAPPIP Swap PiP/Main N REPLACEME +TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME +TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME +TV Playback TOGGLECC608 Toggle VBI CC REPLACEME +TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME +TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME +TV Playback MUTE Mute |,\\\\,F9 REPLACEME +TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME +TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME +TV Playback VOLUMEUP Volume up ],},F11 REPLACEME +TV Playback TOGGLECC Toggle any captions T REPLACEME +TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME +TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME +TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME +TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME +TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME +TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME +TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME +TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME +TV Playback JUMPFFWD Jump ahead PgDown REPLACEME +TV Playback PREVCHAN Switch to the previous channel H REPLACEME +TV Playback JUMPBKMRK Jump to bookmark K REPLACEME +TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME +TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME +TV Playback JUMPRWND Jump back PgUp REPLACEME +TV Playback SEEKRWND Rewind Left REPLACEME +TV Playback SEEKFFWD Fast Forward Right REPLACEME +TV Playback CHANNELDOWN Channel down Down REPLACEME +TV Playback CHANNELUP Channel up Up REPLACEME +TV Playback ARBSEEK Arbitrary Seek * REPLACEME +TV Playback DELETE Delete Program D REPLACEME +TV Playback CLEAROSD Clear OSD Backspace REPLACEME +TV Frontend DETAILS Show program details U REPLACEME +TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME +TV Frontend UPCOMING List upcoming episodes O REPLACEME +TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME +TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME +TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME +TV Playback PAUSE Pause P REPLACEME +TV Frontend RANKINC Increase program or channel rank Right REPLACEME +TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME +TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME +TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME +Gallery DELETE Delete marked images or current image if none are marked D REPLACEME +TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME +Gallery MARK Mark image T REPLACEME +Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME +TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME +Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME +Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +Music DELETE Delete track from playlist D REPLACEME +Gallery INFO Toggle Showing Information about Image I REPLACEME +Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music REFRESH Refresh music tree 8 REPLACEME +Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME +Music FILTER Filter All My Music F REPLACEME +Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt new file mode 100644 index 0000000..8c3a391 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt @@ -0,0 +1,320 @@ +value data hostname +AC3PassThru 0 REPLACEME +AggressiveSoundcardBuffer 0 REPLACEME +AllowQuitShutdown 3 REPLACEME +AltClearSavedPosition 1 REPLACEME +AspectOverride 0 REPLACEME +AudioNag 1 REPLACEME +AudioOutputDevice /dev/dsp REPLACEME +AutoCommercialSkip 2 REPLACEME +AutoLookupCD 1 REPLACEME +AutomaticSetWatched 0 REPLACEME +AutoPlayCD 0 REPLACEME +BackendServerPort 6543 REPLACEME +BackendStatusPort 6544 REPLACEME +CCBackground 0 REPLACEME +CDBlankType fast REPLACEME +CDCreateDir 1 REPLACEME +CDDevice /dev/cdrom REPLACEME +CDDiskSize 1 REPLACEME +CDWriterEnabled 0 REPLACEME +CDWriteSpeed 0 REPLACEME +ChannelFormat <num> <sign> REPLACEME +ChannelOrdering channum REPLACEME +chanPerPage 5 REPLACEME +ClearSavedPosition 1 REPLACEME +CommNotifyAmount 0 REPLACEME +CommRewindAmount 0 REPLACEME +CustomFilters REPLACEME +DateFormat ddd MMM d REPLACEME +DecodeExtraAudio 1 REPLACEME +Default MythVideo View 1 REPLACEME +DefaultCCMode 0 REPLACEME +DefaultRipQuality 0 REPLACEME +DefaultTVChannel 3 REPLACEME +Deinterlace 1 REPLACEME +DeinterlaceFilter kerneldeint REPLACEME +DisplayGroupDefaultView 0 REPLACEME +DisplayGroupTitleSort 0 REPLACEME +DisplayRecGroup Default REPLACEME +DispRecGroupAsAllProg 0 REPLACEME +DTSPassThru 0 REPLACEME +DVDDeviceLocation /dev/dvd REPLACEME +DVDOnInsertDVD 1 REPLACEME +DVDRipLocation /data/media/tmp REPLACEME +EjectCDAfterRipping 1 REPLACEME +EnableMHEG 0 REPLACEME +EnableXbox 0 REPLACEME +EnableXbox 0 REPLACEME +EncoderType ogg REPLACEME +EndOfRecordingExitPrompt 1 REPLACEME +EPGFillType 10 REPLACEME +EPGScrollType 1 REPLACEME +EPGShowCategoryColors 1 REPLACEME +EPGShowCategoryText 1 REPLACEME +EPGShowChannelIcon 1 REPLACEME +EPGShowFavorites 0 REPLACEME +ExactSeeking 0 REPLACEME +FFRewReposTime 100 REPLACEME +FFRewReverse 1 REPLACEME +FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME +GalleryDir /data/media/images REPLACEME +GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME +GalleryMoviePlayerCmd mplayer -fs %s REPLACEME +GalleryOverlayCaption 0 REPLACEME +GalleryRecursiveSlideshow 1 REPLACEME +GallerySortOrder 20 REPLACEME +GalleryThumbnailLocation 1 REPLACEME +GameAllTreeLevels system gamename REPLACEME +GameFavTreeLevels gamename REPLACEME +GeneratePreviewPixmaps 0 REPLACEME +GuiHeight 0 REPLACEME +GuiOffsetX 0 REPLACEME +GuiOffsetY 0 REPLACEME +GuiSizeForTV 0 REPLACEME +GuiVidModeResolution 640x480 REPLACEME +GuiWidth 0 REPLACEME +HideMouseCursor 1 REPLACEME +HorizScanPercentage 0 REPLACEME +Ignore_ID3 0 REPLACEME +IndividualMuteControl 0 REPLACEME +IntelliLastPlayWeight 25 REPLACEME +IntelliPlayCountWeight 25 REPLACEME +IntelliRandomWeight 15 REPLACEME +IntelliRatingWeight 35 REPLACEME +ISO639Language0 eng REPLACEME +ISO639Language1 eng REPLACEME +JobAllowCommFlag 1 REPLACEME +JobAllowTranscode 1 REPLACEME +JobQueueCheckFrequency 60 REPLACEME +JobQueueCPU 0 REPLACEME +JobQueueMaxSimultaneousJobs 1 REPLACEME +JobQueueWindowEnd 23:59 REPLACEME +JobQueueWindowStart 00:00 REPLACEME +KeyboardAccelerators 1 REPLACEME +Language EN REPLACEME +LastMusicPlaylistPush 0 REPLACEME +LCDBacklightOn 1 REPLACEME +LCDBigClock 0 REPLACEME +LCDEnable 0 REPLACEME +LCDHeartBeatOn 0 REPLACEME +LCDKeyString ABCDEF REPLACEME +LCDPopupTime 5 REPLACEME +LCDShowChannel 1 REPLACEME +LCDShowGeneric 1 REPLACEME +LCDShowMenu 1 REPLACEME +LCDShowMusic 1 REPLACEME +LCDShowMusicItems ArtistTitle REPLACEME +LCDShowRecStatus 0 REPLACEME +LCDShowTime 1 REPLACEME +LCDShowVolume 1 REPLACEME +LircKeyPressedApp REPLACEME +ListAsShuffled 0 REPLACEME +LiveTVInAllPrograms 0 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanPeriod 14 REPLACEME +LogCleanPeriod 14 REPLACEME +LogMaxCount 100 REPLACEME +LogMaxCount 100 REPLACEME +LogPrintLevel 8 REPLACEME +LogPrintLevel 8 REPLACEME +LongChannelFormat <num> <name> REPLACEME +MasterMixerVolume 70 REPLACEME +MenuTheme MythVantage-menu REPLACEME +MixerControl PCM REPLACEME +MixerDevice /dev/mixer REPLACEME +MonitorDrives 0 REPLACEME +MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME +MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME +MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME +Mp3UseVBR 0 REPLACEME +MTDac3Flag 0 REPLACEME +MTDConcurrentTranscodes 1 REPLACEME +MTDLogFlag 0 REPLACEME +MTDNiceLevel 20 REPLACEME +MTDPort 2442 REPLACEME +MTDRipSize 0 REPLACEME +MTDxvidFlag 1 REPLACEME +MusicAudioDevice default REPLACEME +MusicLocation /data/media/audio REPLACEME +MusicShowRatings 0 REPLACEME +MythArchiveAlwaysUseMythTranscode 1 REPLACEME +MythArchiveChapterMenuAR Video REPLACEME +MythArchiveCopyRemoteFiles 1 REPLACEME +MythArchiveDateFormat %a %b %d REPLACEME +MythArchiveDvdauthorCmd dvdauthor REPLACEME +MythArchiveDVDLocation /dev/dvd REPLACEME +MythArchiveEncodeToAc3 1 REPLACEME +MythArchiveFfmpegCmd ffmpeg REPLACEME +MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME +MythArchiveGrowisofsCmd growisofs REPLACEME +MythArchiveMainMenuAR 16:9 REPLACEME +MythArchiveMkisofsCmd mkisofs REPLACEME +MythArchiveMpeg2encCmd mpeg2enc REPLACEME +MythArchiveMplexCmd mplex REPLACEME +MythArchivePng2yuvCmd png2yuv REPLACEME +MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME +MythArchiveSpumuxCmd spumux REPLACEME +MythArchiveTcrequantCmd tcrequant REPLACEME +MythArchiveTempDir /data/media/tmp REPLACEME +MythArchiveTimeFormat %I:%M %p REPLACEME +MythArchiveUseFIFO 1 REPLACEME +MythArchiveVideoFormat NTSC REPLACEME +MythControlsVolume 1 REPLACEME +mythdvd.DVDPlayerCommand Internal REPLACEME +mythvideo.db_folder_view 1 REPLACEME +mythvideo.ImageCacheSize 50 REPLACEME +mythvideo.sort_ignores_case 1 REPLACEME +NetworkControlEnabled 1 REPLACEME +NetworkControlPort 6546 REPLACEME +NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME +NoPromptOnExit 0 REPLACEME +NoWhitespace 0 REPLACEME +OnlyImportNewMusic 0 REPLACEME +OSDCC708CapitalsFont FreeMono.ttf REPLACEME +OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME +OSDCC708CasualFont FreeMono.ttf REPLACEME +OSDCC708CasualItalicFont FreeMono.ttf REPLACEME +OSDCC708CursiveFont FreeMono.ttf REPLACEME +OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME +OSDCC708DefaultFontType MonoSerif REPLACEME +OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708TextZoom 100 REPLACEME +OSDCCFont FreeMono.ttf REPLACEME +OSDFont FreeMono.ttf REPLACEME +OSDGeneralTimeout 2 REPLACEME +OSDNotifyTimeout 6 REPLACEME +OSDProgramInfoTimeout 3 REPLACEME +OSDTheme Gray-OSD REPLACEME +OSDThemeFontSizeType default REPLACEME +ParanoiaLevel Full REPLACEME +PassThruOutputDevice Default REPLACEME +PCMMixerVolume 70 REPLACEME +PersistentBrowseMode 1 REPLACEME +PIPLocation 0 REPLACEME +PlaybackBoxStartInTitle 1 REPLACEME +PlaybackExitPrompt 2 REPLACEME +PlaybackPreview 1 REPLACEME +PlaybackPreviewLowCPU 1 REPLACEME +PlayBoxEpisodeSort Date REPLACEME +PlayBoxOrdering 1 REPLACEME +PlayBoxShading 0 REPLACEME +PlayBoxTransparency 1 REPLACEME +PlayMode none REPLACEME +PostCDRipScript REPLACEME +PreferredMPEG2Decoder ffmpeg REPLACEME +PreviewFromBookmark 1 REPLACEME +PVR350EPGAlphaValue 164 REPLACEME +PVR350InternalAudioOnly 0 REPLACEME +PVR350OutputEnable 0 REPLACEME +PVR350VideoDev /dev/video16 REPLACEME +QtFontBig 25 REPLACEME +QtFontMedium 16 REPLACEME +QtFontSmall 12 REPLACEME +QueryInitialFilter 0 REPLACEME +RandomTheme 0 REPLACEME +RealtimePriority 1 REPLACEME +RecordFilePrefix /data/media/video/recordings REPLACEME +RememberRecGroup 1 REPLACEME +RepeatMode all REPLACEME +RunFrontendInWindow 0 REPLACEME +SelChangeRecThreshold 16 REPLACEME +SelectChangesChannel 1 REPLACEME +ServiceMythWEB 0 REPLACEME +ServiceNFS 0 REPLACEME +ServiceSamba 0 REPLACEME +SetupPinCodeRequired 0 REPLACEME +ShortDateFormat M/d REPLACEME +ShowGroupInfo 0 REPLACEME +ShowWholeTree 1 REPLACEME +SlideshowBackground REPLACEME +SlideshowDelay 5 REPLACEME +SlideshowOpenGLTransition none REPLACEME +SlideshowOpenGLTransitionLength 2000 REPLACEME +SlideshowTransition none REPLACEME +SmartChannelChange 0 REPLACEME +SmartForward 0 REPLACEME +StickyKeys 1 REPLACEME +Style Windows REPLACEME +SubTitleCommand -sid %s REPLACEME +TagSeparator - REPLACEME +Theme basic-blue REPLACEME +ThemeFontSizeType default REPLACEME +ThemePainter qt REPLACEME +TimeFormat h:mm AP REPLACEME +timePerPage 4 REPLACEME +TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME +TranscodeCommand transcode REPLACEME +TreeLevels splitartist artist album title REPLACEME +TVVidModeForceAspect 0.0 REPLACEME +TVVidModeForceAspect0 0.0 REPLACEME +TVVidModeForceAspect1 0.0 REPLACEME +TVVidModeForceAspect2 0.0 REPLACEME +TVVidModeRefreshRate 0 REPLACEME +TVVidModeRefreshRate0 0 REPLACEME +TVVidModeRefreshRate1 0 REPLACEME +TVVidModeRefreshRate2 0 REPLACEME +TVVidModeResolution 640x480 REPLACEME +TVVidModeResolution0 640x480 REPLACEME +TVVidModeResolution1 640x480 REPLACEME +TVVidModeResolution2 640x480 REPLACEME +UDPNotifyPort 6948 REPLACEME +UnknownCategory Unknown REPLACEME +UnknownTitle Unknown REPLACEME +upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME +UseArrowAccels 1 REPLACEME +UseOutputPictureControls 1 REPLACEME +UseVideoModes 0 REPLACEME +UseVideoTimebase 0 REPLACEME +UseVirtualKeyboard 1 REPLACEME +VCDDeviceLocation /dev/cdrom REPLACEME +VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME +VertScanPercentage 0 REPLACEME +VideoAggressivePC 0 REPLACEME +VideoArtworkDir /data/media/images/posters REPLACEME +VideoBrowserNoDB 0 REPLACEME +VideoDefaultParentalLevel 4 REPLACEME +VideoGalleryAspectRatio 1 REPLACEME +VideoGalleryColsPerPage 4 REPLACEME +VideoGalleryNoDB 0 REPLACEME +VideoGalleryRowsPerPage 3 REPLACEME +VideoGallerySubtitle 1 REPLACEME +VideoListUnknownFiletypes 1 REPLACEME +VideoNewBrowsable 1 REPLACEME +VideoDefaultPlayer Internal REPLACEME +VideoStartupDir /data/media/video/movies REPLACEME +VideoTreeLoadMetaData 1 REPLACEME +VideoTreeNoDB 0 REPLACEME +VidModeHeight0 0 REPLACEME +VidModeHeight1 0 REPLACEME +VidModeHeight2 0 REPLACEME +VidModeWidth0 0 REPLACEME +VidModeWidth1 0 REPLACEME +VidModeWidth2 0 REPLACEME +VisualCycleOnSongChange 0 REPLACEME +VisualMode Random REPLACEME +VisualModeDelay 0 REPLACEME +VisualScaleHeight 1 REPLACEME +VisualScaleWidth 1 REPLACEME +WatchTVGuide 0 REPLACEME +WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME +WebBrowserHideScrollbars 0 REPLACEME +WebBrowserScrollMode 1 REPLACEME +WebBrowserScrollSpeed 4 REPLACEME +WebBrowserZoomLevel 20 REPLACEME +XScanDisplacement 0 REPLACEME +YScanDisplacement 0 REPLACEME +HaltCommand sudo /sbin/poweroff REPLACEME +RebootCommand sudo /sbin/reboot REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt new file mode 100644 index 0000000..f82f2d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt @@ -0,0 +1,209 @@ +context action description keylist hostname +Music FFWD Fast forward PgDown REPLACEME +Music STOP Stop playback O REPLACEME +Music MUTE Mute |,\\\\,F9 REPLACEME +Gallery SCROLLUP Scroll image up 2 REPLACEME +Music VOLUMEDOWN Volume down [,{,F10 REPLACEME +Music VOLUMEUP Volume up ],},F11 REPLACEME +qt DELETE Delete D REPLACEME +Music RWND Rewind PgUp REPLACEME +qt EDIT Edit E REPLACEME +Music PAUSE Pause/Start playback P REPLACEME +Gallery RECENTER Recenter image 5 REPLACEME +Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME +Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME +Gallery SCROLLRIGHT Scroll image right 6 REPLACEME +Gallery MENU Toggle activating menu in thumbnail view M REPLACEME +Gallery SCROLLDOWN Scroll image down 8 REPLACEME +Gallery ZOOMIN Zoom image in 9 REPLACEME +Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME +Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME +Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME +Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME +Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME +Gallery END Go to the last image in thumbnail view End REPLACEME +Gallery HOME Go to the first image in thumbnail view Home REPLACEME +Gallery SCROLLLEFT Scroll image left 4 REPLACEME +Gallery PLAY Start/Stop Slideshow P REPLACEME +NetFlix REMOVE Removes movie from queue D REPLACEME +Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME +Gallery ZOOMOUT Zoom image out 7 REPLACEME +NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME +Global DOWN Down Arrow Down REPLACEME +ITV Menu MENUTEXT Menu Text F7 REPLACEME +ITV Menu TEXTEXIT Menu Exit F6 REPLACEME +Global LEFT Left Arrow Left REPLACEME +Global RIGHT Right Arrow Right REPLACEME +Global UP Up Arrow Up REPLACEME +Global MENU Pop-up menu M REPLACEME +Global PREVVIEW Previous View Home REPLACEME +Global ESCAPE Escape Esc REPLACEME +Global PAGEUP Page Up PgUp REPLACEME +Global SELECT Select Return,Enter,Space REPLACEME +Global HELP Help F1 REPLACEME +Global INFO More information I REPLACEME +Global NEXTVIEW Next View End REPLACEME +ITV Menu MENUBLUE Menu Blue F5 REPLACEME +Global PAGEDOWN Page Down PgDown REPLACEME +Global EJECT Eject Removable Media REPLACEME +Global 3 3 3 REPLACEME +Global 1 1 1 REPLACEME +Global 6 6 6 REPLACEME +Global 0 0 0 REPLACEME +Global 2 2 2 REPLACEME +Global 4 4 4 REPLACEME +TV Frontend DELETE Delete Program D REPLACEME +Global 8 8 8 REPLACEME +Global 7 7 7 REPLACEME +TV Frontend PAGEDOWN Page Down 9 REPLACEME +TV Frontend PAGEUP Page Up 3 REPLACEME +Global 5 5 5 REPLACEME +TV Frontend CHANGERECGROUP Change Recording Group REPLACEME +Global 9 9 9 REPLACEME +Video END Go to the last video End REPLACEME +Video INCPARENT Increase Parental Level ],},F11 REPLACEME +Weather PAUSE Pause current page P REPLACEME +TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME +Video BROWSE Change browsable in video manager B REPLACEME +Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME +Video HOME Go to the first video Home REPLACEME +Video FILTER Open video filter dialog F REPLACEME +Welcome STARTXTERM Open an Xterm window F12 REPLACEME +Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music BLANKSCR Blank screen 5 REPLACEME +Video DELETE Delete video D REPLACEME +Music THMBUP Increase rating 9 REPLACEME +Music CYCLEVIS Cycle visualizer mode 6 REPLACEME +Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME +Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +TV Frontend PLAYBACK Play Program P REPLACEME +News FORCERETRIEVE Force update news items M REPLACEME +Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME +News RETRIEVENEWS Update news items I REPLACEME +News CANCEL Cancel news item updating C REPLACEME +Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME +Teletext Menu MENUWHITE Menu White F6 REPLACEME +ITV Menu MENURED Menu Red F2 REPLACEME +ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME +ITV Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME +Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME +Teletext Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME +Teletext Menu MENUBLUE Menu Blue F5 REPLACEME +Teletext Menu TOGGLETT Toggle Teletext T REPLACEME +Teletext Menu NEXTPAGE Next Page Down REPLACEME +TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME +TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME +TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME +TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME +Teletext Menu MENURED Menu Red F2 REPLACEME +TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME +Teletext Menu PREVPAGE Previous Page Up REPLACEME +TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME +TV Playback PLAY Play Ctrl+P REPLACEME +TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME +TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME +TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME +TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME +TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME +TV Playback FINDER Show the Program Finder # REPLACEME +TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME +TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME +TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME +TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME +TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME +TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME +TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME +TV Playback SPEEDINC Increase the playback speed U REPLACEME +TV Playback STRETCHDEC Decrease time stretch speed REPLACEME +TV Playback SPEEDDEC Decrease the playback speed J REPLACEME +TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME +TV Playback GUIDE Show the Program Guide S REPLACEME +TV Playback JUMPPREV Jump to previously played recording REPLACEME +TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME +TV Playback STRETCHINC Increase time stretch speed REPLACEME +TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME +TV Playback PREVCC708 Previous ATSC CC track REPLACEME +TV Playback NEXTCC708 Next ATSC CC track REPLACEME +TV Playback NEXTCC Next of any captions REPLACEME +TV Playback NEXTSCAN Next video scan overidemode REPLACEME +TV Playback NEXTCC608 Next VBI CC track REPLACEME +TV Playback PREVCC608 Previous VBI CC track REPLACEME +TV Playback PREVAUDIO Previous audio track - REPLACEME +TV Playback PREVSUBTITLE Previous subtitle track REPLACEME +TV Playback NEXTSUBTITLE Next subtitle track REPLACEME +TV Playback NEXTAUDIO Next audio track + REPLACEME +TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME +TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME +TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME +TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME +TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME +TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME +TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME +TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME +TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME +TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME +TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME +TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME +TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME +TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME +TV Playback SWAPPIP Swap PiP/Main N REPLACEME +TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME +TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME +TV Playback TOGGLECC608 Toggle VBI CC REPLACEME +TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME +TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME +TV Playback MUTE Mute |,\\\\,F9 REPLACEME +TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME +TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME +TV Playback VOLUMEUP Volume up ],},F11 REPLACEME +TV Playback TOGGLECC Toggle any captions T REPLACEME +TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME +TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME +TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME +TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME +TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME +TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME +TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME +TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME +TV Playback JUMPFFWD Jump ahead PgDown REPLACEME +TV Playback PREVCHAN Switch to the previous channel H REPLACEME +TV Playback JUMPBKMRK Jump to bookmark K REPLACEME +TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME +TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME +TV Playback JUMPRWND Jump back PgUp REPLACEME +TV Playback SEEKRWND Rewind Left REPLACEME +TV Playback SEEKFFWD Fast Forward Right REPLACEME +TV Playback CHANNELDOWN Channel down Down REPLACEME +TV Playback CHANNELUP Channel up Up REPLACEME +TV Playback ARBSEEK Arbitrary Seek * REPLACEME +TV Playback DELETE Delete Program D REPLACEME +TV Playback CLEAROSD Clear OSD Backspace REPLACEME +TV Frontend DETAILS Show program details U REPLACEME +TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME +TV Frontend UPCOMING List upcoming episodes O REPLACEME +TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME +TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME +TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME +TV Playback PAUSE Pause P REPLACEME +TV Frontend RANKINC Increase program or channel rank Right REPLACEME +TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME +TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME +TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME +Gallery DELETE Delete marked images or current image if none are marked D REPLACEME +TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME +Gallery MARK Mark image T REPLACEME +Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME +TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME +Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME +Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +Music DELETE Delete track from playlist D REPLACEME +Gallery INFO Toggle Showing Information about Image I REPLACEME +Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music REFRESH Refresh music tree 8 REPLACEME +Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME +Music FILTER Filter All My Music F REPLACEME +Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt new file mode 100644 index 0000000..106be04 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt @@ -0,0 +1,320 @@ +value data hostname +AC3PassThru 0 REPLACEME +AggressiveSoundcardBuffer 0 REPLACEME +AllowQuitShutdown 3 REPLACEME +AltClearSavedPosition 1 REPLACEME +AspectOverride 0 REPLACEME +AudioNag 1 REPLACEME +AudioOutputDevice /dev/dsp REPLACEME +AutoCommercialSkip 2 REPLACEME +AutoLookupCD 1 REPLACEME +AutomaticSetWatched 0 REPLACEME +AutoPlayCD 0 REPLACEME +BackendServerPort 6543 REPLACEME +BackendStatusPort 6544 REPLACEME +CCBackground 0 REPLACEME +CDBlankType fast REPLACEME +CDCreateDir 1 REPLACEME +CDDevice /dev/cdrom REPLACEME +CDDiskSize 1 REPLACEME +CDWriterEnabled 0 REPLACEME +CDWriteSpeed 0 REPLACEME +ChannelFormat <num> <sign> REPLACEME +ChannelOrdering channum REPLACEME +chanPerPage 5 REPLACEME +ClearSavedPosition 1 REPLACEME +CommNotifyAmount 0 REPLACEME +CommRewindAmount 0 REPLACEME +CustomFilters REPLACEME +DateFormat ddd MMM d REPLACEME +DecodeExtraAudio 1 REPLACEME +Default MythVideo View 1 REPLACEME +DefaultCCMode 0 REPLACEME +DefaultRipQuality 0 REPLACEME +DefaultTVChannel 3 REPLACEME +Deinterlace 1 REPLACEME +DeinterlaceFilter kerneldeint REPLACEME +DisplayGroupDefaultView 0 REPLACEME +DisplayGroupTitleSort 0 REPLACEME +DisplayRecGroup Default REPLACEME +DispRecGroupAsAllProg 0 REPLACEME +DTSPassThru 0 REPLACEME +DVDDeviceLocation /dev/dvd REPLACEME +DVDOnInsertDVD 1 REPLACEME +DVDRipLocation /data/media/tmp REPLACEME +EjectCDAfterRipping 1 REPLACEME +EnableMHEG 0 REPLACEME +EnableXbox 0 REPLACEME +EnableXbox 0 REPLACEME +EncoderType ogg REPLACEME +EndOfRecordingExitPrompt 1 REPLACEME +EPGFillType 10 REPLACEME +EPGScrollType 1 REPLACEME +EPGShowCategoryColors 1 REPLACEME +EPGShowCategoryText 1 REPLACEME +EPGShowChannelIcon 1 REPLACEME +EPGShowFavorites 0 REPLACEME +ExactSeeking 0 REPLACEME +FFRewReposTime 100 REPLACEME +FFRewReverse 1 REPLACEME +FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME +GalleryDir /data/media/images REPLACEME +GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME +GalleryMoviePlayerCmd mplayer -fs %s REPLACEME +GalleryOverlayCaption 0 REPLACEME +GalleryRecursiveSlideshow 1 REPLACEME +GallerySortOrder 20 REPLACEME +GalleryThumbnailLocation 1 REPLACEME +GameAllTreeLevels system gamename REPLACEME +GameFavTreeLevels gamename REPLACEME +GeneratePreviewPixmaps 0 REPLACEME +GuiHeight 0 REPLACEME +GuiOffsetX 0 REPLACEME +GuiOffsetY 0 REPLACEME +GuiSizeForTV 0 REPLACEME +GuiVidModeResolution 640x480 REPLACEME +GuiWidth 0 REPLACEME +HaltCommand halt REPLACEME +HideMouseCursor 1 REPLACEME +HorizScanPercentage 0 REPLACEME +Ignore_ID3 0 REPLACEME +IndividualMuteControl 0 REPLACEME +IntelliLastPlayWeight 25 REPLACEME +IntelliPlayCountWeight 25 REPLACEME +IntelliRandomWeight 15 REPLACEME +IntelliRatingWeight 35 REPLACEME +ISO639Language0 eng REPLACEME +ISO639Language1 eng REPLACEME +JobAllowCommFlag 1 REPLACEME +JobAllowTranscode 1 REPLACEME +JobQueueCheckFrequency 60 REPLACEME +JobQueueCPU 0 REPLACEME +JobQueueMaxSimultaneousJobs 1 REPLACEME +JobQueueWindowEnd 23:59 REPLACEME +JobQueueWindowStart 00:00 REPLACEME +KeyboardAccelerators 1 REPLACEME +Language EN REPLACEME +LastMusicPlaylistPush 0 REPLACEME +LCDBacklightOn 1 REPLACEME +LCDBigClock 0 REPLACEME +LCDEnable 0 REPLACEME +LCDHeartBeatOn 0 REPLACEME +LCDKeyString ABCDEF REPLACEME +LCDPopupTime 5 REPLACEME +LCDShowChannel 1 REPLACEME +LCDShowGeneric 1 REPLACEME +LCDShowMenu 1 REPLACEME +LCDShowMusic 1 REPLACEME +LCDShowMusicItems ArtistTitle REPLACEME +LCDShowRecStatus 0 REPLACEME +LCDShowTime 1 REPLACEME +LCDShowVolume 1 REPLACEME +LircKeyPressedApp REPLACEME +ListAsShuffled 0 REPLACEME +LiveTVInAllPrograms 0 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanPeriod 14 REPLACEME +LogCleanPeriod 14 REPLACEME +LogMaxCount 100 REPLACEME +LogMaxCount 100 REPLACEME +LogPrintLevel 8 REPLACEME +LogPrintLevel 8 REPLACEME +LongChannelFormat <num> <name> REPLACEME +MasterMixerVolume 70 REPLACEME +MenuTheme STB-menu REPLACEME +MixerControl PCM REPLACEME +MixerDevice /dev/mixer REPLACEME +MonitorDrives 0 REPLACEME +MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME +MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME +MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME +Mp3UseVBR 0 REPLACEME +MTDac3Flag 0 REPLACEME +MTDConcurrentTranscodes 1 REPLACEME +MTDLogFlag 0 REPLACEME +MTDNiceLevel 20 REPLACEME +MTDPort 2442 REPLACEME +MTDRipSize 0 REPLACEME +MTDxvidFlag 1 REPLACEME +MusicAudioDevice default REPLACEME +MusicLocation /data/media/audio REPLACEME +MusicShowRatings 0 REPLACEME +MythArchiveAlwaysUseMythTranscode 1 REPLACEME +MythArchiveChapterMenuAR Video REPLACEME +MythArchiveCopyRemoteFiles 1 REPLACEME +MythArchiveDateFormat %a %b %d REPLACEME +MythArchiveDvdauthorCmd dvdauthor REPLACEME +MythArchiveDVDLocation /dev/dvd REPLACEME +MythArchiveEncodeToAc3 1 REPLACEME +MythArchiveFfmpegCmd ffmpeg REPLACEME +MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME +MythArchiveGrowisofsCmd growisofs REPLACEME +MythArchiveMainMenuAR 16:9 REPLACEME +MythArchiveMkisofsCmd mkisofs REPLACEME +MythArchiveMpeg2encCmd mpeg2enc REPLACEME +MythArchiveMplexCmd mplex REPLACEME +MythArchivePng2yuvCmd png2yuv REPLACEME +MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME +MythArchiveSpumuxCmd spumux REPLACEME +MythArchiveTcrequantCmd tcrequant REPLACEME +MythArchiveTempDir /data/media/tmp REPLACEME +MythArchiveTimeFormat %I:%M %p REPLACEME +MythArchiveUseFIFO 1 REPLACEME +MythArchiveVideoFormat NTSC REPLACEME +MythControlsVolume 1 REPLACEME +mythdvd.DVDPlayerCommand Internal REPLACEME +mythvideo.db_folder_view 1 REPLACEME +mythvideo.ImageCacheSize 50 REPLACEME +mythvideo.sort_ignores_case 1 REPLACEME +NetworkControlEnabled 1 REPLACEME +NetworkControlPort 6546 REPLACEME +NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME +NoPromptOnExit 0 REPLACEME +NoWhitespace 0 REPLACEME +OnlyImportNewMusic 0 REPLACEME +OSDCC708CapitalsFont FreeMono.ttf REPLACEME +OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME +OSDCC708CasualFont FreeMono.ttf REPLACEME +OSDCC708CasualItalicFont FreeMono.ttf REPLACEME +OSDCC708CursiveFont FreeMono.ttf REPLACEME +OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME +OSDCC708DefaultFontType MonoSerif REPLACEME +OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708TextZoom 100 REPLACEME +OSDCCFont FreeMono.ttf REPLACEME +OSDFont FreeMono.ttf REPLACEME +OSDGeneralTimeout 2 REPLACEME +OSDNotifyTimeout 6 REPLACEME +OSDProgramInfoTimeout 3 REPLACEME +OSDTheme Gray-OSD REPLACEME +OSDThemeFontSizeType default REPLACEME +ParanoiaLevel Full REPLACEME +PassThruOutputDevice Default REPLACEME +PCMMixerVolume 70 REPLACEME +PersistentBrowseMode 1 REPLACEME +PIPLocation 0 REPLACEME +PlaybackBoxStartInTitle 1 REPLACEME +PlaybackExitPrompt 2 REPLACEME +PlaybackPreview 1 REPLACEME +PlaybackPreviewLowCPU 1 REPLACEME +PlayBoxEpisodeSort Date REPLACEME +PlayBoxOrdering 1 REPLACEME +PlayBoxShading 0 REPLACEME +PlayBoxTransparency 1 REPLACEME +PlayMode none REPLACEME +PostCDRipScript REPLACEME +PreferredMPEG2Decoder ffmpeg REPLACEME +PreviewFromBookmark 1 REPLACEME +PVR350EPGAlphaValue 164 REPLACEME +PVR350InternalAudioOnly 0 REPLACEME +PVR350OutputEnable 0 REPLACEME +PVR350VideoDev /dev/video16 REPLACEME +QtFontBig 25 REPLACEME +QtFontMedium 16 REPLACEME +QtFontSmall 12 REPLACEME +QueryInitialFilter 0 REPLACEME +RandomTheme 0 REPLACEME +RealtimePriority 1 REPLACEME +RecordFilePrefix /data/media/video/recordings REPLACEME +RememberRecGroup 1 REPLACEME +RepeatMode all REPLACEME +RunFrontendInWindow 0 REPLACEME +SelChangeRecThreshold 16 REPLACEME +SelectChangesChannel 1 REPLACEME +ServiceMythWEB 0 REPLACEME +ServiceNFS 0 REPLACEME +ServiceSamba 0 REPLACEME +SetupPinCodeRequired 0 REPLACEME +ShortDateFormat M/d REPLACEME +ShowGroupInfo 0 REPLACEME +ShowWholeTree 1 REPLACEME +SlideshowBackground REPLACEME +SlideshowDelay 5 REPLACEME +SlideshowOpenGLTransition none REPLACEME +SlideshowOpenGLTransitionLength 2000 REPLACEME +SlideshowTransition none REPLACEME +SmartChannelChange 0 REPLACEME +SmartForward 0 REPLACEME +StickyKeys 1 REPLACEME +Style REPLACEME +SubTitleCommand -sid %s REPLACEME +TagSeparator - REPLACEME +Theme basic-blue REPLACEME +ThemeFontSizeType default REPLACEME +ThemePainter qt REPLACEME +TimeFormat h:mm AP REPLACEME +timePerPage 4 REPLACEME +TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME +TranscodeCommand transcode REPLACEME +TreeLevels splitartist artist album title REPLACEME +TVVidModeForceAspect 0.0 REPLACEME +TVVidModeForceAspect0 0.0 REPLACEME +TVVidModeForceAspect1 0.0 REPLACEME +TVVidModeForceAspect2 0.0 REPLACEME +TVVidModeRefreshRate 0 REPLACEME +TVVidModeRefreshRate0 0 REPLACEME +TVVidModeRefreshRate1 0 REPLACEME +TVVidModeRefreshRate2 0 REPLACEME +TVVidModeResolution 640x480 REPLACEME +TVVidModeResolution0 640x480 REPLACEME +TVVidModeResolution1 640x480 REPLACEME +TVVidModeResolution2 640x480 REPLACEME +UDPNotifyPort 6948 REPLACEME +UnknownCategory Unknown REPLACEME +UnknownTitle Unknown REPLACEME +upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME +UseArrowAccels 1 REPLACEME +UseDHCP 1 REPLACEME +UseOutputPictureControls 1 REPLACEME +UseVideoModes 0 REPLACEME +UseVideoTimebase 0 REPLACEME +UseVirtualKeyboard 1 REPLACEME +VCDDeviceLocation /dev/cdrom REPLACEME +VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME +VertScanPercentage 0 REPLACEME +VideoAggressivePC 0 REPLACEME +VideoArtworkDir /data/media/images/posters REPLACEME +VideoBrowserNoDB 0 REPLACEME +VideoDefaultParentalLevel 4 REPLACEME +VideoGalleryAspectRatio 1 REPLACEME +VideoGalleryColsPerPage 4 REPLACEME +VideoGalleryNoDB 0 REPLACEME +VideoGalleryRowsPerPage 3 REPLACEME +VideoGallerySubtitle 1 REPLACEME +VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME +VideoListUnknownFiletypes 1 REPLACEME +VideoNewBrowsable 1 REPLACEME +VideoStartupDir /data/media/video/movies REPLACEME +VideoTreeLoadMetaData 1 REPLACEME +VideoTreeNoDB 0 REPLACEME +VidModeHeight0 0 REPLACEME +VidModeHeight1 0 REPLACEME +VidModeHeight2 0 REPLACEME +VidModeWidth0 0 REPLACEME +VidModeWidth1 0 REPLACEME +VidModeWidth2 0 REPLACEME +VisualCycleOnSongChange 0 REPLACEME +VisualMode Random REPLACEME +VisualModeDelay 0 REPLACEME +VisualScaleHeight 1 REPLACEME +VisualScaleWidth 1 REPLACEME +WatchTVGuide 0 REPLACEME +WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME +WebBrowserHideScrollbars 0 REPLACEME +WebBrowserScrollMode 1 REPLACEME +WebBrowserScrollSpeed 4 REPLACEME +WebBrowserZoomLevel 20 REPLACEME +XScanDisplacement 0 REPLACEME +YScanDisplacement 0 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core b/abs/core-testing/LinHES-config/templates/sources/mv-core new file mode 100644 index 0000000..f9f6c97 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-core @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-core diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core-testing b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing new file mode 100644 index 0000000..1fce6ea --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-core-testing diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra b/abs/core-testing/LinHES-config/templates/sources/mv-extra new file mode 100644 index 0000000..e13640f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-extra diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing new file mode 100644 index 0000000..c176add --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing @@ -0,0 +1,2 @@ +##Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-extra-testing diff --git a/abs/core-testing/LinHES-config/templates/sources/svc_pkg b/abs/core-testing/LinHES-config/templates/sources/svc_pkg new file mode 100644 index 0000000..c1efdcc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/svc_pkg @@ -0,0 +1,3 @@ +[svc_pkg] +Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686 + diff --git a/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf new file mode 100755 index 0000000..51db997 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf @@ -0,0 +1,413 @@ +# + +begin remote + + name Time_Warner_SA3250 + flags CONST_LENGTH|RAW_CODES + eps 30 + aeps 100 + + ptrail 0 + repeat 0 0 + gap 100240 + frequency 57600 + + begin raw_codes + + name MUTE + 972 802 971 802 1887 778 + 971 798 971 798 972 798 + 971 798 972 798 971 1677 + 972 802 1887 1656 992 + + name POWER + 3450 3229 894 2468 891 2468 + 893 778 892 2468 891 2469 + 917 2444 891 2468 892 2469 + 891 779 892 778 918 752 + 917 754 917 752 892 2471 + 889 779 892 779 892 777 + 892 779 892 777 868 2492 + 892 2469 891 2470 890 + + name GUIDE + 3397 3285 890 2470 840 2519 + 916 755 891 2470 839 2520 + 891 780 891 2474 860 2495 + 892 778 917 754 890 780 + 891 781 864 804 917 2443 + 865 805 891 779 866 2495 + 864 805 892 779 891 2469 + 865 2495 891 2469 866 + + + name INFO + 3449 3231 918 2441 920 2440 + 920 750 947 2414 920 2440 + 920 750 894 777 919 750 + 947 2413 921 750 919 750 + 920 751 919 752 918 2441 + 921 749 895 776 919 2441 + 920 2440 920 2441 920 749 + 921 2439 921 2440 921 + + name UP + 3396 3285 915 2444 919 2442 + 918 752 916 2444 919 2441 + 919 751 916 2445 919 751 + 890 780 916 753 917 754 + 942 729 889 780 916 2445 + 919 751 915 756 914 2448 + 916 752 916 2444 918 2442 + 919 2441 918 2443 918 + + name DOWN + 3421 3261 890 2470 918 2442 + 919 751 916 2446 917 2441 + 919 2442 918 2442 918 752 + 916 2444 919 751 890 780 + 916 755 915 755 915 2445 + 919 753 914 755 889 781 + 889 781 916 2444 919 752 + 889 2471 919 2441 918 + + name LEFT + 3427 3255 918 2441 924 2437 + 920 750 918 2442 920 2441 + 919 2440 921 2439 921 750 + 919 751 944 726 919 752 + 917 753 918 751 944 2417 + 920 750 893 777 919 751 + 919 752 918 2441 921 2440 + 920 2440 920 2440 921 + + name RIGHT + 3424 3258 892 2466 921 2439 + 896 774 920 2441 920 2440 + 920 750 920 751 945 2414 + 921 750 919 751 920 750 + 919 752 919 751 919 2440 + 921 750 918 752 918 2442 + 920 2440 921 749 918 2443 + 920 2440 920 2441 919 + + name SELECT + 3424 3257 944 2416 919 2442 + 919 750 918 2442 920 2441 + 919 751 943 727 918 2442 + 920 2440 920 752 916 752 + 969 702 917 753 892 2468 + 919 751 892 778 918 2442 + 924 2436 921 750 917 753 + 918 2443 919 2441 919 + + name SETTINGS + 3402 3278 871 2491 921 2438 + 921 749 922 2440 919 2441 + 919 2440 921 749 921 750 + 895 2465 920 2440 921 2440 + 920 749 896 775 921 2439 + 920 749 923 748 895 775 + 922 2439 920 2440 920 749 + 897 774 896 774 921 + + name EXIT + 3400 3279 896 2464 921 2439 + 921 750 895 2465 921 2439 + 921 749 898 772 896 2465 + 920 2440 920 750 920 2441 + 920 749 896 774 870 2491 + 921 749 921 749 895 2465 + 921 2440 920 749 922 748 + 897 2464 920 750 896 + + name PGUP + 3425 3255 920 2440 920 2440 + 921 749 895 2466 920 2440 + 920 749 920 2441 896 2464 + 921 749 919 2445 917 2440 + 920 750 920 750 920 2441 + 921 748 921 749 920 2440 + 921 750 919 752 919 2440 + 921 749 921 750 919 + + name PGDN + 3400 3281 921 2438 921 2441 + 920 749 895 2465 896 2465 + 920 2440 920 2440 920 2440 + 921 749 896 2465 895 2465 + 920 750 895 775 920 2440 + 921 749 921 750 895 775 + 896 774 896 774 921 2439 + 921 749 921 751 894 + + name VOLUP + 995 778 1886 779 994 775 + 995 777 993 774 996 774 + 995 775 995 1654 1885 778 + 995 775 995 774 995 + + name VOLDN + 996 778 971 802 1862 803 + 970 799 996 774 995 774 + 996 774 995 1654 1886 778 + 996 773 971 1678 991 + + name CHUP + 3421 3259 916 2444 918 2443 + 918 751 917 2444 919 2441 + 919 2441 919 751 916 2444 + 919 2441 919 2443 918 751 + 941 729 916 755 917 2442 + 919 752 916 754 891 778 + 918 2444 918 751 916 754 + 917 753 916 2445 919 + + name CHDN + 3421 3260 915 2445 918 2442 + 919 751 891 2469 919 2441 + 927 745 915 2444 919 2441 + 919 2441 919 2442 918 752 + 915 755 890 780 917 2443 + 919 752 916 754 915 2445 + 919 751 915 755 890 781 + 914 756 916 2445 917 + + name A + 3425 3258 916 2442 920 2441 + 919 751 918 2442 919 2441 + 920 2440 920 2441 919 2441 + 919 2441 920 750 917 2443 + 920 751 917 752 919 2442 + 920 750 918 753 917 753 + 917 753 942 728 917 753 + 918 2442 920 750 942 + + name B + 3398 3283 916 2443 892 2470 + 892 778 892 2468 891 2475 + 886 779 916 754 892 777 + 892 778 919 2442 891 2468 + 918 753 892 778 891 2469 + 892 778 892 778 918 2443 + 891 2469 892 2467 893 2469 + 891 778 918 753 892 + + name C + 3396 3283 891 2469 892 2468 + 892 778 917 2444 892 2468 + 892 2469 891 778 892 779 + 893 777 892 2468 892 2468 + 918 752 893 777 892 2469 + 892 778 892 778 867 802 + 918 2444 917 2442 868 2492 + 893 778 892 779 916 + + name 1 + 3424 3257 890 2470 865 2495 + 891 780 892 2468 865 2495 + 892 777 891 780 892 779 + 890 780 916 2444 865 805 + 891 779 917 753 916 2445 + 865 805 916 754 892 2469 + 865 2494 916 2445 865 2495 + 891 779 917 2443 866 + + name 2 + 3422 3258 916 2444 865 2496 + 889 782 915 2444 865 2495 + 917 2444 839 830 891 780 + 915 755 890 2470 864 806 + 917 753 891 780 866 2495 + 864 805 891 779 892 779 + 865 2494 865 2496 891 2469 + 865 805 891 2469 865 + + name 3 + 3397 3284 916 2443 892 2468 + 892 779 893 2467 892 2468 + 917 753 892 2469 891 778 + 893 778 891 2469 892 778 + 918 753 890 779 893 2468 + 891 779 893 778 891 2469 + 892 777 893 2468 891 2468 + 917 754 943 2417 892 + + name 4 + 3421 3261 890 2470 839 2520 + 917 753 891 2470 865 2495 + 917 2443 865 2495 890 781 + 891 778 891 2470 865 804 + 895 776 892 779 891 2468 + 866 805 917 753 943 727 + 866 805 889 2471 865 2494 + 892 780 916 2444 865 + + name 5 + 3396 3282 920 2441 892 2467 + 894 778 891 2468 892 2469 + 891 780 866 802 893 2470 + 890 779 918 2443 891 777 + 892 779 918 752 892 2468 + 892 779 918 752 918 2443 + 891 2469 891 779 891 2469 + 892 778 891 2468 893 + + name 6 + 3396 3284 918 2442 866 2494 + 892 778 917 2444 866 2494 + 917 2444 865 804 893 2468 + 890 780 916 2445 890 779 + 892 779 891 778 918 2443 + 891 778 892 779 892 779 + 891 2468 892 778 919 2444 + 889 778 893 2468 891 + + name 7 + 3398 3282 893 2467 892 2468 + 893 779 891 2469 891 2468 + 919 752 892 2467 892 2469 + 891 779 892 2468 892 777 + 893 778 918 752 892 2468 + 893 779 916 753 918 2442 + 892 779 891 778 893 2468 + 892 778 893 2467 892 + + name 8 + 3448 3232 892 2468 866 2494 + 892 779 892 2467 867 2494 + 891 2469 866 2495 891 2469 + 865 805 968 2394 864 804 + 918 753 891 779 892 2468 + 866 804 917 754 891 780 + 916 752 917 754 892 2469 + 865 804 893 2468 890 + + name 9 + 3422 3258 891 2469 839 2521 + 891 780 892 2468 824 2536 + 916 754 916 755 891 779 + 866 2494 839 2522 891 778 + 892 778 890 781 915 2448 + 837 831 891 779 890 2470 + 837 2523 942 2418 838 832 + 892 778 890 2471 839 + + name 0 + 3398 3284 891 2469 890 2469 + 893 779 891 2468 892 2468 + 892 2468 892 778 892 779 + 891 2469 892 2468 893 778 + 892 777 893 777 893 2469 + 891 778 892 779 868 802 + 917 2443 892 2469 890 779 + 891 779 892 2468 893 + + name LAST + 3422 3258 891 2471 916 2443 + 891 780 891 2469 272 3088 + 865 805 916 2445 308 3052 + 890 2469 892 779 915 756 + 889 781 889 780 890 2471 + 890 779 889 781 891 2471 + 272 1397 890 779 891 781 + 890 2469 448 2912 917 + + name FAV + 3423 3257 918 2442 944 2417 + 917 753 892 2469 890 2471 + 324 3036 890 2469 379 289 + 167 2525 891 2470 379 2981 + 890 780 378 270 242 781 + 866 806 889 2469 786 884 + 891 779 891 779 892 779 + 916 754 890 779 892 778 + 891 2470 839 + + name REW + 3420 3258 916 2445 326 3033 + 891 780 916 2443 891 2469 + 916 2445 838 831 918 754 + 890 2471 837 832 916 2444 + 838 832 891 779 916 2445 + 838 831 892 779 890 780 + 892 2469 839 2520 891 780 + 915 2444 836 836 890 + + name PLAY + 3448 3233 916 2444 891 2469 + 917 753 892 2468 918 2443 + 941 2420 891 2468 917 754 + 915 755 914 2446 918 2443 + 916 754 916 753 945 2416 + 943 727 941 729 918 752 + 917 753 919 2442 916 2444 + 915 755 943 728 916 + + name FF + 3420 3259 917 2442 946 2415 + 918 752 916 2445 918 2441 + 943 728 917 753 942 728 + 892 2470 864 806 889 2471 + 865 805 918 752 916 2443 + 944 726 892 779 891 2470 + 891 2469 915 2445 917 753 + 890 2471 222 1447 891 + + name PAUSE + 3421 3259 891 2470 787 2573 + 890 780 916 2444 840 2520 + 892 2468 864 806 917 2444 + 839 831 890 780 891 779 + 891 780 891 779 889 2471 + 839 831 916 755 915 754 + 892 2469 839 830 917 2444 + 840 2521 891 2469 840 + + name STOP + 3398 3284 889 2471 325 3036 + 891 779 890 2470 395 290 + 140 2535 889 781 890 781 + 889 2470 274 1397 891 2470 + 272 3087 917 754 890 780 + 889 2472 293 1377 890 779 + 916 2444 448 2913 916 754 + 866 2495 325 1344 891 779 + 915 + + name REC + 3421 3258 917 2444 916 2444 + 942 729 942 2420 889 2469 + 992 2367 942 730 891 2468 + 917 754 916 2443 892 2470 + 892 777 916 754 892 2467 + 943 730 916 754 891 779 + 917 2442 917 754 943 2417 + 918 753 915 754 892 + + name BYPASS + 3450 3231 891 2470 890 2470 + 917 753 916 2447 913 2445 + 273 3088 889 780 890 2470 + 891 2469 916 755 890 780 + 942 727 918 752 916 2444 + 890 782 916 754 865 805 + 891 2469 891 780 889 781 + 891 2468 259 3102 866 + + name TV/VCR + 19945 3915 612 1873 560 1926 + 560 1925 561 931 560 931 + 587 905 559 931 563 931 + 557 932 561 1925 585 908 + 583 1901 559 931 586 905 + 585 907 610 1875 561 1924 + 561 1926 559 1926 535 1951 + 559 1925 586 907 585 1899 + 560 931 1048 7898 3707 3862 + 587 1899 586 1899 586 1900 + 559 932 586 908 323 + + end raw_codes + + end remote diff --git a/abs/core-testing/LinHES-config/templates/xine.config.template b/abs/core-testing/LinHES-config/templates/xine.config.template new file mode 100644 index 0000000..966487f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xine.config.template @@ -0,0 +1,754 @@ +# +# xine config file +# +.version:2 + +# Entries which are still set to their default values are commented out. +# Remove the '#' at the beginning of the line, if you want to change them. + +# Enable deinterlacing by default +# bool, default: 0 +#gui.deinterlace_by_default:0 + +# Configuration experience level +# { Beginner Advanced Expert Master of the known universe }, default: 0 +gui.experience_level:Expert + +# Enable OSD support +# bool, default: 1 +#gui.osd_enabled:1 + +# Dismiss OSD time (s) +# numeric, default: 3 +#gui.osd_timeout:3 + +# Ask user for playback with unsupported codec +# bool, default: 0 +#gui.play_anyway:0 + +# Automatically reload old playlist +# bool, default: 0 +#gui.playlist_auto_reload:0 + +# Audio visualization plugin +# { oscope fftscope fftgraph goom }, default: 0 +gui.post_audio_plugin:fftgraph + +# gui skin theme +# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4 +gui.skin:KeramicRH8 + +# Change xine's behavior for unexperienced user +# bool, default: 1 +#gui.smart_mode:1 + +# Snapshot location +# string, default: /home/jams +#gui.snapshotdir:/home/jams + +# Display splash screen +# bool, default: 1 +gui.splash:0 + +# Subtitle autoloading +# bool, default: 1 +#gui.subtitle_autoload:1 + +# Visual animation style +# { None Post Plugin Stream Animation }, default: 1 +#gui.visual_anim:Post Plugin + +# Windows stacking (more) +# bool, default: 0 +#gui.always_layer_above:0 + +# Audio mixer control method +# { Sound card Software }, default: 0 +#gui.audio_mixer_method:Sound card + +# Visiblility behavior of panel +# bool, default: 0 +#gui.auto_panel_visibility:0 + +# Visibility behavior of output window +# bool, default: 0 +#gui.auto_video_output_visibility:0 + +# Deinterlace plugin. +# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 +#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 + +# Event sender behavior +# bool, default: 1 +#gui.eventer_sticky:1 + +# Windows stacking +# bool, default: 0 +#gui.layer_above:0 + +# Use unscaled OSD +# bool, default: 1 +gui.osd_use_unscaled:0 + +# Screensaver reset interval (s) +# numeric, default: 10 +#gui.screensaver_timeout:10 + +# Menu shortcut style +# { Windows style Emacs style }, default: 0 +#gui.shortcut_style:Windows style + +# Stream information +# bool, default: 0 +#gui.sinfo_auto_update:0 + +# Skin Server Url +# string, default: http://xine.sourceforge.net/skins/skins.slx +#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx + +# Chapter hopping +# bool, default: 1 +#gui.skip_by_chapter:1 + +# New stream sizes resize output window +# bool, default: 1 +#gui.stream_resize_window:1 + +# Tips timeout (ms) +# numeric, default: 5000 +#gui.tips_timeout:5000 + +# gui tips visibility +# bool, default: 1 +#gui.tips_visible:1 + +# Name of video display +# string, default: +#gui.video_display: + +# Synchronized X protocol (debug) +# bool, default: 0 +#gui.xsynchronize:0 + +# Double size for small streams (require stream_resize_window) +# bool, default: 0 +#gui.zoom_small_stream:0 + +# Logo mrl +# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv +#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv + +# use XVidModeExtension when switching to fullscreen +# bool, default: 0 +#gui.use_xvidext:0 + +# height for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_height:-8192 + +# width for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_width:-8192 + +# x coordinate for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_x:-8192 + +# y coordinate for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_y:-8192 + +# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3) +# string, default: 0 1 +#gui.xinerama_use_screens:0 1 + +# Amplification level +# [0..200], default: 100 +#gui.amp_level:100 + +# gui panel visibility +# bool, default: 1 +gui.panel_visible:0 + +# numeric, default: 200 +gui.panel_x:21 + +# numeric, default: 100 +gui.panel_y:1050 + +gui.control_x:186 + +gui.control_y:46 + +gui.dropped_frames_warning:0 + +gui.eventer_x:1041 + +gui.eventer_y:781 + +gui.mrl_browser_x:23 + +gui.mrl_browser_y:9 + +gui.setup_x:717 + +gui.setup_y:227 + +gui.viewlog_x:200 + +gui.viewlog_y:210 + +# color specification yuv-opacity +# string, default: 8080c0-f +#gui.osdmenu.color_focused_button:8080c0-f + +# color specification yuv-opacity +# string, default: 808080-f +#gui.osdmenu.color_focused_slider:808080-f + +# color specification yuv-opacity +# string, default: ff8080-f +#gui.osdmenu.color_focused_slider_knob:ff8080-f + +# color specification yuv-opacity +# string, default: 808080-f +#gui.osdmenu.color_focused_text_border:808080-f + +# color specification yuv-opacity +# string, default: ff8080-f +#gui.osdmenu.color_focused_text_foreground:ff8080-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_label_border:0080c0-f + +# color specification yuv-opacity +# string, default: c08080-f +#gui.osdmenu.color_label_foreground:c08080-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_label_window:0080c0-f + +# color specification yuv-opacity +# string, default: 008000-f +#gui.osdmenu.color_slider:008000-f + +# color specification yuv-opacity +# string, default: ffff00-f +#gui.osdmenu.color_slider_knob:ffff00-f + +# color specification yuv-opacity +# string, default: 008000-f +#gui.osdmenu.color_text_border:008000-f + +# color specification yuv-opacity +# string, default: ffff00-f +#gui.osdmenu.color_text_foreground:ffff00-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_text_window:0080c0-f + +# directory a media in dvd device will be mounted +# string, default: /dvd +#gui.osdmenu.dvd_mountpoint:/dvd + +# palette (foreground-border-background) to use for subtitles and OSD +# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0 +#ui.osd.text_palette:white-black-transparent + +# audio driver to use +# { auto null alsa oss esd file none }, default: 0 +audio.driver:oss + +# a/v sync method to use by OSS +# { auto getodelay getoptr softsync probebuffer }, default: 0 +#audio.oss_sync_method:auto + +# use A/52 dynamic range compression +# bool, default: 0 +#audio.a52.dynamic_range:0 + +# downmix audio to 2 channel surround stereo +# bool, default: 0 +#audio.a52.surround_downmix:0 + +# A/52 volume +# [0..200], default: 100 +#audio.a52.level:100 + +# OSS audio device name +# { auto /dev/dsp /dev/sound/dsp }, default: 0 +#audio.device.oss_device_name:auto + +# OSS audio device number, -1 for none +# numeric, default: -1 +#audio.device.oss_device_number:-1 + +# OSS audio mixer number, -1 for none +# numeric, default: -1 +#audio.device.oss_mixer_number:-1 + +audio.device.alsa_front_device:default + +# speaker arrangement +# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1 +#audio.output.speaker_arrangement:Stereo 2.0 + +# offset for digital passthrough +# numeric, default: 0 +#audio.synchronization.passthrough_offset:0 + +# play audio even on slow/fast speeds +# bool, default: 0 +#audio.synchronization.slow_fast_audio:0 + +# method to sync audio and video +# { metronom feedback resample }, default: 0 +#audio.synchronization.av_sync_method:metronom feedback + +# always resample to this rate (0 to disable) +# numeric, default: 0 +#audio.synchronization.force_rate:0 + +# enable resampling +# { auto off on }, default: 0 +#audio.synchronization.resample_mode:auto + +# startup audio volume +# [0..100], default: 50 +#audio.volume.mixer_volume:50 + +# restore volume level at startup +# bool, default: 0 +#audio.volume.remember_volume:0 + +# video driver to use +# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0 +#video.driver:auto + +# pitch alignment workaround +# bool, default: 0 +#video.device.xv_pitch_alignment:0 + +# disable exact alpha blending of overlays +# bool, default: 0 +#video.output.disable_exact_alphablend:0 + +# disable all video scaling +# bool, default: 0 +#video.output.disable_scaling:0 + +# horizontal image position in the output window +# [0..100], default: 50 +#video.output.horizontal_position:50 + +# vertical image position in the output window +# [0..100], default: 50 +#video.output.vertical_position:50 + +# deinterlace method (deprecated) +# { none bob weave greedy onefield onefield_xv linearblend }, default: 4 +video.output.xv_deinterlace_method:linearblend + +# MPEG-4 postprocessing quality +# [0..6], default: 3 +#video.processing.ffmpeg_pp_quality:3 + +# DXR3 device number +# numeric, default: 0 +#dxr3.device_number:0 + +# swap odd and even lines +# bool, default: 0 +#dxr3.encoding.swap_fields:0 + +# add black bars to correct aspect ratio +# bool, default: 1 +#dxr3.encoding.add_bars:1 + +# use smooth play mode for mpeg encoder playback +# bool, default: 1 +#dxr3.encoding.alt_play_mode:1 + +# device used for CD audio +# string, default: /dev/cdrom +#media.audio_cd.device:/dev/cdrom + +# slow down disc drive to this speed factor +# numeric, default: 4 +#media.audio_cd.drive_slowdown:4 + +# query CDDB +# bool, default: 1 +#media.audio_cd.use_cddb:1 + +# CDDB cache directory +# string, default: /home/jams/.xine/cddbcache +#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache + +# CDDB server port +# numeric, default: 8880 +#media.audio_cd.cddb_port:8880 + +# CDDB server name +# string, default: freedb.freedb.org +#media.audio_cd.cddb_server:freedb.freedb.org + +# directory for saving streams +# string, default: +#media.capture.save_dir: + +# Number of dvb card to use. +# numeric, default: 0 +#media.dvb.adapter:0 + +# Remember last DVB channel watched +# bool, default: 1 +#media.dvb.remember_channel:1 + +# Last DVB channel viewed +# numeric, default: -1 +#media.dvb.last_channel:-1 + +# default language for DVD playback +# string, default: en +#media.dvd.language:en + +# region the DVD player claims to be in (1 to 8) +# numeric, default: 1 +#media.dvd.region:1 + +# device used for DVD playback +# string, default: /dev/dvd +#media.dvd.device:/dev/dvd + +# raw device set up for DVD access +# string, default: /dev/rdvd +#media.dvd.raw_device:/dev/rdvd + +# read-ahead caching +# bool, default: 1 +#media.dvd.readahead:1 + +# CSS decryption method +# { key disc title }, default: 0 +#media.dvd.css_decryption_method:key + +# play mode when title/chapter is given +# { entire dvd one chapter }, default: 0 +#media.dvd.play_single_chapter:entire dvd + +# unit for seeking +# { seek in program chain seek in program }, default: 0 +#media.dvd.seek_behaviour:seek in program chain + +# unit for the skip action +# { skip program skip part skip title }, default: 0 +#media.dvd.skip_behaviour:skip program + +# path to the title key cache +# string, default: /home/jams/.dvdcss/ +#media.dvd.css_cache_path:/home/jams/.dvdcss/ + +# file browsing start location +# string, default: /home/jams +#media.files.origin_path:/home/jams + +# list hidden files +# bool, default: 0 +#media.files.show_hidden_files:0 + +# network bandwidth +# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10 +#media.network.bandwidth:1.5 Mbps (T1) + +# Timeout for network stream reading (in seconds) +# numeric, default: 30 +#media.network.timeout:30 + +# Domains for which to ignore the HTTP proxy +# string, default: +#media.network.http_no_proxy: + +# HTTP proxy host +# string, default: +#media.network.http_proxy_host: + +# HTTP proxy password +# string, default: +#media.network.http_proxy_password: + +# HTTP proxy port +# numeric, default: 80 +#media.network.http_proxy_port:80 + +# HTTP proxy username +# string, default: +#media.network.http_proxy_user: + +# MMS protocol +# { auto TCP HTTP }, default: 0 +#media.network.mms_protocol:auto + +# automatically advance VCD track/entry +# bool, default: 1 +#media.vcd.autoadvance:1 + +# VCD default type to use on autoplay +# { MPEG track entry segment playback-control item }, default: 3 +#media.vcd.autoplay:playback-control item + +# CD-ROM drive used for VCD when none given +# string, default: +#media.vcd.device: + +# VCD position slider range +# { auto track entry }, default: 0 +#media.vcd.length_reporting:auto + +# show 'rejected' VCD LIDs +# bool, default: 0 +#media.vcd.show_rejected:0 + +# VCD format string for stream comment field +# string, default: %P - Track %T +#media.vcd.comment_format:%P - Track %T + +# VCD debug flag mask +# numeric, default: 0 +#media.vcd.debug:0 + +# VCD format string for display banner +# string, default: %F - %I %N%L%S, disk %c of %C - %v %A +#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A + +# v4l radio device +# string, default: /dev/v4l/radio0 +#media.video4linux.radio_device:/dev/v4l/radio0 + +# v4l video device +# string, default: /dev/v4l/video0 +#media.video4linux.video_device:/dev/v4l/video0 + +# device used for WinTV-PVR 250/350 (pvr plugin) +# string, default: /dev/video0 +#media.wintv_pvr.device:/dev/video0 + +# path to RealPlayer codecs +# string, default: /usr/lib/win32 +#decoder.external.real_codecs_path:/usr/lib/win32 + +# path to Win32 codecs +# string, default: /usr/lib/win32 +#decoder.external.win32_codecs_path:/usr/lib/win32 + +# subtitle size +# { tiny small normal large very large huge }, default: 1 +#subtitles.separate.subtitle_size:small + +# subtitle vertical offset +# numeric, default: 0 +#subtitles.separate.vertical_offset:0 + +# font for subtitles +# string, default: sans +#subtitles.separate.font:sans + +# encoding of the subtitles +# string, default: iso-8859-1 +#subtitles.separate.src_encoding:iso-8859-1 + +# use unscaled OSD if possible +# bool, default: 1 +#subtitles.separate.use_unscaled_osd:1 + +# default duration of subtitle display in seconds +# numeric, default: 4 +#subtitles.separate.timeout:4 + +# frames per second to generate +# numeric, default: 14 +#effects.goom.fps:14 + +# goom image height +# numeric, default: 240 +#effects.goom.height:240 + +# goom image width +# numeric, default: 320 +#effects.goom.width:320 + +# colorspace conversion method +# { Fast but not photorealistic Slow but looks better }, default: 0 +#effects.goom.csc_method:Fast but not photorealistic + +# number of audio buffers +# numeric, default: 230 +#engine.buffers.audio_num_buffers:230 + +# number of video buffers +# numeric, default: 500 +#engine.buffers.video_num_buffers:500 + +# default number of video frames +# numeric, default: 15 +#engine.buffers.video_num_frames:15 + +# priority for a/52 decoder +# numeric, default: 0 +#engine.decoder_priorities.a/52:0 + +# priority for bitplane decoder +# numeric, default: 0 +#engine.decoder_priorities.bitplane:0 + +# priority for dts decoder +# numeric, default: 0 +#engine.decoder_priorities.dts:0 + +# priority for dvaudio decoder +# numeric, default: 0 +#engine.decoder_priorities.dvaudio:0 + +# priority for dxr3-mpeg2 decoder +# numeric, default: 0 +#engine.decoder_priorities.dxr3-mpeg2:0 + +# priority for dxr3-spudec decoder +# numeric, default: 0 +#engine.decoder_priorities.dxr3-spudec:0 + +# priority for faad decoder +# numeric, default: 0 +#engine.decoder_priorities.faad:0 + +# priority for ffmpeg-wmv8 decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpeg-wmv8:0 + +# priority for ffmpeg-wmv9 decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpeg-wmv9:0 + +# priority for ffmpegaudio decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpegaudio:0 + +# priority for ffmpegvideo decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpegvideo:0 + +# priority for gdkpixbuf decoder +# numeric, default: 0 +#engine.decoder_priorities.gdkpixbuf:0 + +# priority for gsm610 decoder +# numeric, default: 0 +#engine.decoder_priorities.gsm610:0 + +# priority for image decoder +# numeric, default: 0 +#engine.decoder_priorities.image:0 + +# priority for mad decoder +# numeric, default: 0 +#engine.decoder_priorities.mad:0 + +# priority for mpc decoder +# numeric, default: 0 +#engine.decoder_priorities.mpc:0 + +# priority for mpeg2 decoder +# numeric, default: 0 +#engine.decoder_priorities.mpeg2:0 + +# priority for nsf decoder +# numeric, default: 0 +#engine.decoder_priorities.nsf:0 + +# priority for pcm decoder +# numeric, default: 0 +#engine.decoder_priorities.pcm:0 + +# priority for qta decoder +# numeric, default: 0 +#engine.decoder_priorities.qta:0 + +# priority for qtv decoder +# numeric, default: 0 +#engine.decoder_priorities.qtv:0 + +# priority for real decoder +# numeric, default: 0 +#engine.decoder_priorities.real:0 + +# priority for realadec decoder +# numeric, default: 0 +#engine.decoder_priorities.realadec:0 + +# priority for rgb decoder +# numeric, default: 0 +#engine.decoder_priorities.rgb:0 + +# priority for spucc decoder +# numeric, default: 0 +#engine.decoder_priorities.spucc:0 + +# priority for spucmml decoder +# numeric, default: 0 +#engine.decoder_priorities.spucmml:0 + +# priority for spudec decoder +# numeric, default: 0 +#engine.decoder_priorities.spudec:0 + +# priority for spudvb decoder +# numeric, default: 0 +#engine.decoder_priorities.spudvb:0 + +# priority for sputext decoder +# numeric, default: 0 +#engine.decoder_priorities.sputext:0 + +# priority for theora decoder +# numeric, default: 0 +#engine.decoder_priorities.theora:0 + +# priority for vorbis decoder +# numeric, default: 0 +#engine.decoder_priorities.vorbis:0 + +# priority for win32a decoder +# numeric, default: 0 +#engine.decoder_priorities.win32a:0 + +# priority for win32v decoder +# numeric, default: 0 +#engine.decoder_priorities.win32v:0 + +# priority for yuv decoder +# numeric, default: 0 +#engine.decoder_priorities.yuv:0 + +# media format detection strategy +# { default reverse content extension }, default: 0 +#engine.demux.strategy:default + +# memcopy method used by xine +# { probe libc kernel mmx mmxext sse }, default: 0 +engine.performance.memcpy_method:libc + +# percentage of discarded frames to tolerate +# numeric, default: 10 +#engine.performance.warn_discarded_threshold:10 + +# percentage of skipped frames to tolerate +# numeric, default: 10 +#engine.performance.warn_skipped_threshold:10 + +# allow implicit changes to the configuration (e.g. by MRL) +# bool, default: 0 +#misc.implicit_config:0 + diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC new file mode 100644 index 0000000..b2cd709 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC @@ -0,0 +1,33 @@ +ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750 + +ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525 + +ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync + +ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ + +ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ + +ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace + +ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace + +Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace + +Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace + +Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace + +Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace + +Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace + +Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace + +Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 + +Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace + +Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + +Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD new file mode 100644 index 0000000..9e846d0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD @@ -0,0 +1,9 @@ +#DVD-NativeModes +ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace +ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace +ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525 diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC new file mode 100644 index 0000000..5536c1b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC @@ -0,0 +1,10 @@ +#Analog-RegularModes +ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace +ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525 +ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace +ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525 +ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace +ModeLine "Broadcast-59.94p" 483 484 492 525 +ModeLine "VHS-59.94i" 483 484 492 525 Interlace +ModeLine "VHS-59.94p" 483 484 492 525 + diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA new file mode 100644 index 0000000..a026f64 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA @@ -0,0 +1,163 @@ +# 640x350 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync + +# 640x400 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync + +# 720x400 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync + +# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz +ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync + +# 640x480 @ 72Hz (VESA) hsync: 37.9kHz +ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync + +# 640x480 @ 75Hz (VESA) hsync: 37.5kHz +ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync + +# 640x480 @ 85Hz (VESA) hsync: 43.3kHz +ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync + +# 800x600 @ 56Hz (VESA) hsync: 35.2kHz +ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync + +# 800x600 @ 60Hz (VESA) hsync: 37.9kHz +ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync + +# 800x600 @ 72Hz (VESA) hsync: 48.1kHz +ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync + +# 800x600 @ 75Hz (VESA) hsync: 46.9kHz +ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync + +# 800x600 @ 85Hz (VESA) hsync: 53.7kHz +ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync + +# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz +ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace + +# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz +ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync + +# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz +ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync + +# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz +ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync + +# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz +ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync + +# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz +ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync + +# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz +ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync + +# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz +ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync + +# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz +ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync + +# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz +ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync + +# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz +ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync + +# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz +ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync +# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz +ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz +ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz +ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz +ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz +ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync + +# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz +ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync + +# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz +ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync + +# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz +ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync + +# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz +ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync + +# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz +ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync + +# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz +ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync + +# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz +ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync + +# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz +ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync + +# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz +ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync + +# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz +ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync + +# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz +ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync + +# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz +ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync + +# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz +ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync + +# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz +ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync + +# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz +ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync + +# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz +ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync + +# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz +ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync + +# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz +ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync + +# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz +ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync + +# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz +ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync + +# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz +ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync + +# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz +ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync + +# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz +ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync + +# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz +ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync + +# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz +ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync + +# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz +ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.custom b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom new file mode 100644 index 0000000..ca6d678 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom @@ -0,0 +1 @@ +ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati new file mode 100644 index 0000000..c6d9249 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati @@ -0,0 +1,94 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "aticonfig-Screen[0]" 0 0 + InputDevice "Mouse0" "CorePointer" + InputDevice "Keyboard0" "CoreKeyboard" +EndSection + +Section "Files" + RgbPath "/usr/share/X11/rgb" + ModulePath "/usr/lib/xorg/modules" + FontPath "/usr/share/fonts/misc" + FontPath "/usr/share/fonts/75dpi" + FontPath "/usr/share/fonts/100dpi" + FontPath "/usr/share/fonts/TTF" + FontPath "/usr/share/fonts/Type1" +EndSection + +Section "Module" + Load "xtrap" + Load "dbe" + Load "record" + Load "extmod" + Load "dri" + Load "type1" + Load "freetype" +EndSection + +Section "InputDevice" + Identifier "Keyboard0" + Driver "kbd" +EndSection + +Section "InputDevice" + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/input/mice" + Option "ZAxisMapping" "4 5 6 7" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Monitor Vendor" + ModelName "Monitor Model" +EndSection + +Section "Monitor" + Identifier "aticonfig-Monitor[0]" +# HorizSync +# VertRefresh + Option "VendorName" "ATI Proprietary Driver" + Option "ModelName" "Generic Autodetecting Monitor" + Option "DPMS" "true" +EndSection + +Section "Device" + + ### Available Driver options are:- + ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", + ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" + ### [arg]: arg optional + #Option "ShadowFB" # [<bool>] + #Option "DefaultRefresh" # [<bool>] + #Option "ModeSetClearScreen" # [<bool>] + Identifier "Card0" + Driver "vesa" + VendorName "ATI Technologies Inc" + BoardName "RV370 5B60 [Radeon X300 (PCIE)]" + BusID "PCI:1:0:0" +EndSection + +Section "Device" + Identifier "aticonfig-Device[0]" + Driver "fglrx" +#INSERT HERE + +# Option "ForceMonitors" "tv,nocrt1,notmds1" +# Option "TVStandard" "SCART" +# Option "TVFormat" "PAL-B" +EndSection + + +Section "Screen" + Identifier "aticonfig-Screen[0]" + Device "aticonfig-Device[0]" + Monitor "aticonfig-Monitor[0]" + DefaultDepth 24 + SubSection "Display" + Viewport 0 0 + Depth 24 + Modes "640x480" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel new file mode 100644 index 0000000..a4d258a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel @@ -0,0 +1,148 @@ +Section "ServerLayout" + Identifier "Xorg Configured" + Screen 0 "Screen0" 0 0 + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "PS/2 Mouse" "CorePointer" +# Serial Mouse not detected +# USB Mouse not detected +EndSection + +Section "ServerFlags" + Option "AllowMouseOpenFail" "true" + +EndSection + +Section "Files" + RgbPath "/usr/share/X11/rgb" + ModulePath "/usr/lib/xorg/modules" + FontPath "/usr/share/fonts/misc:unscaled" + FontPath "/usr/share/fonts/misc" + FontPath "/usr/share/fonts/75dpi:unscaled" + FontPath "/usr/share/fonts/75dpi" + FontPath "/usr/share/fonts/100dpi:unscaled" + FontPath "/usr/share/fonts/100dpi" + FontPath "/usr/share/fonts/PEX" +# Additional fonts: Locale, Gimp, TTF... + FontPath "/usr/share/fonts/cyrillic" +# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" +# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" +# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! + FontPath "/usr/share/fonts/Type1" + FontPath "/usr/share/fonts/ttf/western" + FontPath "/usr/share/fonts/ttf/decoratives" + FontPath "/usr/share/fonts/truetype" + FontPath "/usr/share/fonts/truetype/openoffice" + FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" + FontPath "/usr/share/fonts/latex-ttf-fonts" + FontPath "/usr/share/fonts/defoma/CID" + FontPath "/usr/share/fonts/defoma/TrueType" +EndSection + +Section "Module" + Load "ddc" # ddc probing of monitor + Load "dbe" + Load "dri" + Load "extmod" + Load "glx" + Load "bitmap" # bitmap-fonts + Load "type1" + Load "freetype" + Load "record" +EndSection + +Section "InputDevice" + Identifier "Keyboard0" + Driver "keyboard" + Option "CoreKeyboard" + Option "XkbRules" "xorg" + Option "XkbModel" "pc105" + Option "XkbLayout" "" + Option "XkbVariant" "" +EndSection + +Section "InputDevice" + Identifier "Serial Mouse" + Driver "mouse" + Option "Protocol" "Microsoft" + Option "Device" "/dev/ttyS0" + Option "Emulate3Buttons" "true" + Option "Emulate3Timeout" "70" + Option "SendCoreEvents" "true" +EndSection + +Section "InputDevice" + Identifier "PS/2 Mouse" + Driver "mouse" + Option "Protocol" "auto" + Option "ZAxisMapping" "4 5" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "true" + Option "Emulate3Timeout" "70" + Option "SendCoreEvents" "true" +EndSection + +Section "InputDevice" + Identifier "USB Mouse" + Driver "mouse" + Option "Device" "/dev/input/mice" + Option "SendCoreEvents" "true" + Option "Protocol" "IMPS/2" + Option "ZAxisMapping" "4 5" + Option "Buttons" "5" +EndSection + +# Auto-generated by Archie mkxcfg + +Section "Monitor" + Identifier "Monitor0" + Option "DPMS" "true" +EndSection + +# Auto-generated by Archie mkxcfg + +Section "Device" + Identifier "Card0" + Driver "intel" + VendorName "All" + BoardName "All" +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + DefaultColorDepth 16 + SubSection "Display" + Depth 1 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 4 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 8 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 15 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 16 + Modes "800x600" + virtual 800 600 + EndSubSection + SubSection "Display" + Depth 24 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 32 + Modes "1024x768" "800x600" "640x480" + EndSubSection +EndSection + +Section "DRI" + Mode 0666 +EndSection diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia new file mode 100755 index 0000000..dec0f42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia @@ -0,0 +1,90 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "extmod" + Load "type1" + Load "freetype" + Load "glx" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" +# HorizSync +# VertRefresh + Option "DPMS" "false" + DisplaySize 203 153 + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +#INSERT MODELINE +EndSection + +Section "Device" + Identifier "Device0" + Driver "nvidia" + VendorName "NVIDIA Corporation" + Option "DPI" "100 x 100" + Option "NoLogo" "1" + +#INSERT HERE + +#END OPTIONS + +# Option "ConnectedMonitor" "DFP" +# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled" +# Option "DigitalVibrance" "0" +# Option "TransparentIndex" "0" +# Option "CursorShadowAlpha" "64" +# Option "CursorShadowXOffset" "4" +# Option "UseEdidFreqs" "True" +# Option "NvAGP" "1" + + + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 24 + SubSection "Display" + Depth 24 + Modes "1280x720" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via new file mode 100644 index 0000000..6dd7821 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via @@ -0,0 +1,77 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "glx" + Load "extmod" + Load "type1" + Load "freetype" + Load "dri" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" + HorizSync 30.0 - 110.0 + VertRefresh 50.0 - 150.0 + Option "DPMS" "false" + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +EndSection + +Section "Device" + Identifier "Device0" + Driver "via" + VendorName "via" + Option "DPI" "100 x 100" + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 16 + SubSection "Display" + Depth 16 + Modes "800x600" + EndSubSection +EndSection + +Section "DRI" + Group "video" + Mode 0666 + EndSection diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware new file mode 100755 index 0000000..843f2f4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware @@ -0,0 +1,72 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "extmod" + Load "type1" + Load "freetype" + Load "glx" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" + HorizSync 30.0 - 110.0 + VertRefresh 50.0 - 150.0 + Option "DPMS" "false" + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +EndSection + +Section "Device" + Identifier "Device0" + Driver "vmware" + VendorName "NVIDIA Corporation" + Option "DPI" "100 x 100" + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 24 + SubSection "Display" + Depth 24 + Modes "1280x720" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/timezip.py b/abs/core-testing/LinHES-config/timezip.py new file mode 100755 index 0000000..505b4a4 --- /dev/null +++ b/abs/core-testing/LinHES-config/timezip.py @@ -0,0 +1,185 @@ +#!/usr/bin/python +# import MySQL module +#used to import the zipcode/timezone/nfs info fromMBE +import MySQLdb +import sys +import getopt +import socket + + +def usage(): + print " -h --help" + print " -d --installdb" + print " -m --masterdb" + print " -n --hostname of current machine" + +def printvars(): + print "masterdb: " + masterdb + print "installdb:" + installdb + print "hostname: " + thishostname + print "BEhostname:" + BEhostname + print "zipcode:" + zipcode + print "timezone:" + tz + print "nfsip:" + nfsip + print "nfstoggle:" + nfstoggle + print "nfsmount:" + nfsmount + print "hobbitclient:" + hobbitclient +# connect +def selectvars(): + + global BEhostname + global zipcode + global tz + global nfsip + global nfstoggle + global nfsmount + global hobbitclient + + db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg") + # create a cursor + cursor = db.cursor() + # execute SQL statement + cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb)) + result = cursor.fetchone() + BEhostname=result[0] + + cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + zipcode = result[0] + except TypeError: + zipcode="" + + cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfsip=result[0] + except TypeError: + nfsip="" + + cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfstoggle=result[0] + except TypeError: + nfstoggle="" + + cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfsmount=result[0] + except TypeError: + nfsmount="" + + cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + tz=result[0] + except TypeError: + tz="" + + if ( thishostname != BEhostname ): + cursor.execute("select data from settings where value='GlobalServiceHobbitserver'") + result = cursor.fetchone() + try: + hobbitclient=result[0] + except TypeError: + hobbitclient="0" + + + +def insertvars(): + + db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg") + cursor = db.cursor() +#inserting the zipcode + cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( zipcode!="" ): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname)) + print "inserting zipcode" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname)) + print "updating zipcode" + +#inserting the timezone + cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( tz != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname)) + print "inserting timezone" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname)) + print "updating timezone" + + +#start of NFSIP + cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( nfsip != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname)) + print "inserting nfsip" + + if (nfstoggle != ""): + cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname)) + print "inserting nfstoggle" + + if ( nfsmount !="") : + cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname)) + print "inserting nfsmountpoint" + +#hobbitclient + cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( tz != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname)) + print "inserting hobbitcleint" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname)) + print "updating hobbitclient" + + +def main(argv): + global masterdb + global installdb + global thishostname + thishostname="" + global BEhostname + global zipcode + global tz + global nfsip + global hobbitclient + try: + opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] ) + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + usage() + sys.exit() + elif opt in ( "-d" , "--installdb"): + installdb = arg + elif opt in ("-m", "--masterdb"): + masterdb = arg + elif opt in ("-n", "--hostname"): + thishostname = arg + + if ( thishostname == "" ): + thishostname = socket.gethostname() + + selectvars() + printvars() + insertvars() +if __name__ == "__main__": + main(sys.argv[1:]) + diff --git a/abs/core-testing/LinHES-config/timezone.bin b/abs/core-testing/LinHES-config/timezone.bin Binary files differnew file mode 100755 index 0000000..a11d65a --- /dev/null +++ b/abs/core-testing/LinHES-config/timezone.bin diff --git a/abs/core-testing/LinHES-config/xconfig.sh b/abs/core-testing/LinHES-config/xconfig.sh new file mode 100755 index 0000000..42603d6 --- /dev/null +++ b/abs/core-testing/LinHES-config/xconfig.sh @@ -0,0 +1,233 @@ +#!/bin/bash +BASE="" +. /etc/profile +#TEMPLATES="/usr/share/templates" + +function Xvalues { + VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2` + echo $VGACARDTYPE + currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '` + } + +function presetupX { +if [ x$XUseAdvanced = x1 ] +then + if [ x$XIgnoreConfig = x1 ] + then + echo "Using User supplied X" + if [ -f $BASE/data/home/mythtv/templates/xorg.user ] + then + cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF + else + echo "Didn't find the file" + echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF + fi + else + setupAdvancedX + fi +else + setupX +fi + +} + +function setupAdvancedX { +echo "#doing the advanced" > /tmp/options + Xcatagory=` echo $Xresadvanced |cut -d_ -f1` + Xres=` echo $Xresadvanced |cut -d_ -f2` + echo $Xcatagory + if [ x$Xcatagory = "xNvidia" ] + then + Xres="" + if [ $XnVidia1080p = "1" ] + then + Xres="${Xres} \"1920x1080_60\"" + fi + if [ $XnVidia1080i = "1" ] + then + Xres="${Xres} \"1920x1080_60i\"" + fi + if [ $XnVidia720p = "1" ] + then + Xres="${Xres} \"1280x720_60\"" + fi + if [ $XnVidia480p = "1" ] + then + Xres="${Xres} \"720x480_60\"" + fi + ML="\t Modes ${Xres}" + else + + ML="\t Modes \"${Xres}\"" + fi + echo $ML + case $Xcardtype in + NVIDIA|nVidia ) + + case $Xconnection in + DVI) ConnectedMonitor=DFP ;; + vga) ConnectedMonitor=CRT;; + Auto) ConnectedMonitor=Auto;; + TV) ConnectedMonitor=TV + echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options + echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options + ;; + esac + if [ $ConnectedMonitor = Auto ] + then + echo "auto connection" + else + echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options + echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options + echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options + fi + + if [ x$XignoreEDID = x1 ] + then + EDIDvalue=true + EDIDFREQ=false + DS=" DisplaySize $XDisplaysize" + HS=" HorizSync $XHsync" + VR=" VertRefresh $XVrefresh" + else + EDIDvalue=false + EDIDFREQ=true + DS="# Display size edid used " + HS="#Hsync edid used " + VR="#Vertrefresh edid used " + + fi + echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options + echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options + + + sed -e "s/^.*Modes.*$/${ML}/" \ + -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ + -e "s/^.*DisplaySize.*$/ $DS/" \ + -e "s/^#.*HorizSync.*$/ $HS/g" \ + -e "s/^#.*VertRefresh.*$/ $VR/g" \ + -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF + + ;; + ati|ATI) + case $Xconnection in + DVI) ConnectedMonitor="tmds1,nocrt1,notv";; + VGA) ConnectedMonitor="crt1,notmds1,notv" ;; + TV) ConnectedMonitor="tv,nocrt1,notmds1" + echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options + echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options + ;; + + esac + + + if [ x$XignoreEDID = x1 ] + then + DS=" DisplaySize $XDisplaysize" + HS=" HorizSync $XHsync" + VR=" VertRefresh $XVrefresh" + else + DS="# Display size edid used " + HS="#Hsync edid used " + VR="#Vertrefresh edid used " + + fi + + echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options + + sed -e "s/^.*Modes.*$/\t $ML/" \ + -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ + -e "s/^.*DisplaySize.*$/ $DS/" \ + -e "s/^#.*HorizSync.*$/ $HS/g" \ + -e "s/^#.*VertRefresh.*$/ $VR/g" \ + -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF + ;; + + via|VIA|Via) echo "no via here" + ;; + + *) + echo "unknown card type" + ;; + esac +} + + + +function setupX { + Xvalues + echo "$currentmode ____ ${Xres}" + #if [ ! x${currentmode} = x\"${Xres}\" ] + if [ x = x ] + then + case $VGACARDTYPE in + nVidia ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -R libgl-dri +# pacman --noconfirm -S nvidia-STB nvidia-utils + pacman --noconfirm -S nvidia nvidia-utils + fi + ;; + VMware ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF + ;; + + VIA ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -R nvidia-STB nvidia-utils + pacman --noconfirm -S libgl-dri + fi + + ;; + Intel) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -Rd nvidia-utils + pacman --noconfirm -S libgl-dri + fi + ;; + + *) #XCONF=`hwd -x |grep etc` + XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-` + + + cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF + ;; + esac + fi + +} + +#MAIN +TESTMODE=$1 +if [ x$TESTMODE = "xtest" ] +then + XORG_CONF="/tmp/xorg.conf.test" + XUseAdvanced="1" + XIgnoreConfig="${2}" + Xcardtype="${3}" + XIgnoreEDID="${4}" + Xconnection="${5}" + XHsync="${6}" + XVrefresh="${7}" + Xresadvanced="${8}" + XTVstandard="${9}" + XTVconnection="${10}" + XDisplaysize="${11}" +else + if [ -f /etc/systemconfig ] + then + . /etc/systemconfig + else + Xres="800x600" + fi + XORG_CONF="/etc/X11/xorg.conf" +fi +presetupX + + |
