diff options
Diffstat (limited to 'abs/core-testing/LinHES-system')
24 files changed, 0 insertions, 1675 deletions
diff --git a/abs/core-testing/LinHES-system/LinHES-profile.sh b/abs/core-testing/LinHES-system/LinHES-profile.sh deleted file mode 100644 index 830b819..0000000 --- a/abs/core-testing/LinHES-system/LinHES-profile.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/bash -export LinHES_ROOT=/usr/LH -export PATH=$PATH:/usr/LH/bin
\ No newline at end of file diff --git a/abs/core-testing/LinHES-system/LinHES-run b/abs/core-testing/LinHES-system/LinHES-run deleted file mode 100755 index d5a3a15..0000000 --- a/abs/core-testing/LinHES-system/LinHES-run +++ /dev/null @@ -1,126 +0,0 @@ -#!/bin/sh -function msg(){ - echo -e "$1" | osd_cat --pos=middle --align=center --offset=200 --delay=5 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font & -} - -. /etc/profile -. /etc/systemconfig -. /etc/unclutter.cfg || { - idle=1 - jitter=200 -} -. /etc/osd_cat.cfg || { - color=yellow - outline=2 - outlinecolour=black - shadow=0 - shadowcolour=black - font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" -} -#keylaunch & -#/usr/bin/tilda & - -#move mouse to corner -xdotool mousemove 0 0 -/usr/X11R6/bin/unclutter -root -idle $idle -jitter $jitter -noevents & -if [ x"$Screensavertype" = "xgscreensaver" ] -then - gnome-screensaver & -elif [ x"$Screensavertype" = "xxscreensaver" ] -then - xscreensaver -no-splash & -fi - -/usr/bin/xvattr -a XV_COLORKEY -v 0 -mtd & -#/usr/bin/nvidia-settings -l -#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 - -if [ x$ShowTips = "x1" ] -then - msg "Alt+h for help" & -fi - -# Run any scripting that applies to special hardware. These brand-specific commands that run -# after Tweaker will, of course, override generic or hardware-specific settings. -SpecialHardwareCommands() { - special_hardware_file=/myth/.special_hardware_type - special_hardware=`cat $special_hardware_file` - - case $special_hardware in - dragon*) - sudo -E twk_audio.pl --implement digital - sudo -E twk_dragon.pl --implement all - ;; - ausdragon*) - ;; - *) - # there are no brand-specific commands for configuring whatever - # special hardware the user chose - ;; - esac -} - -#update apple trailers -if [[ x$RunFrontend = x1 && -f ~/.configure ]] -then - /usr/bin/php -q /usr/bin/myth_trailers_grabber > /home/mythtv/appletrailer.xml && /usr/bin/fix_aple_url.sh 2>/dev/null & -fi - - -if [ ! $SystemType = "Frontend_only" ] -then - if [ -f ~/.configure ] - then - # Run Tweaker, which applies generic and hardware-specific settings - if [ ! -f ~/.no_meth ] - then - sudo -E tweaker.pl - /bin/rm /tmp/fps # ??? clean up a temp file that will eventually be obsolete anyway - # Run any brand-specific commands, if necessary. - SpecialHardwareCommands - else - rm -f ~/.no_meth - fi - sudo pacman -R myth2ipod myt2xvid3 - sudo pacman -S --noconfirm myth2ipod myt2xvid3 - sudo sv stop mythbackend - cat /data/database/dvd_transcode_r6.sql | mysql -u root mythconverg - xterm -fn *18* -e sudo taskset -c 0 /usr/bin/mythtv-setup - sudo sv start mythbackend - sudo chown -R mythtv.mythtv /home/mythtv - nice -n 19 mythfilldatabase --quiet & - msg "Guide data is being loaded. \n Until this completes\n some shows will appear as unknown \n in the program guide." - rm ~/.configure - fi -fi - - -if [ x"$UseMythWelcome" = "x1" ] -then - STARTCMD="/usr/bin/mythwelcome" -else - STARTCMD="/usr/bin/mythfrontend -d -l /var/log/mythtv/mythfrontend.log" -fi - -echo "=====================================================================" -echo "Starting $STARTCMD" -firstboot.sh & - -if [ -f /tmp/nomfe ] -then - exit 0 -else - if [ -f /tmp/debug ] - then - echo "using gbd/debug" - gdb /usr/bin/mythfrontend -x $MV_ROOT/mfegdbcommands.txt - mv gdb.txt gdb.txt.mythfrontend - sleep 10 - else - killall -9 irexec - /usr/bin/irexec -d - $STARTCMD 2>&1 - fi -fi - diff --git a/abs/core-testing/LinHES-system/LinHES-session b/abs/core-testing/LinHES-system/LinHES-session deleted file mode 100755 index 52924d2..0000000 --- a/abs/core-testing/LinHES-system/LinHES-session +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -. /etc/profile -. /etc/systemconfig - -xhost +local: -xhost +127.0.0.1 -xset -dpms s off -export MALLOC_CHECK_=0 -#start fluxbox -fluxbox > /var/log/fluxbox.log 2>&1 - - - diff --git a/abs/core-testing/LinHES-system/LinHES-start b/abs/core-testing/LinHES-system/LinHES-start deleted file mode 100755 index 3157a2e..0000000 --- a/abs/core-testing/LinHES-system/LinHES-start +++ /dev/null @@ -1,162 +0,0 @@ -#!/bin/sh -# $Xorg: startx.cpp,v 1.3 2000/08/17 19:54:29 cpqbld Exp $ -# -# This is just a sample implementation of a slightly less primitive -# interface than xinit. It looks for user .xinitrc and .xserverrc -# files, then system xinitrc and xserverrc files, else lets xinit choose -# its default. The system xinitrc should probably do things like check -# for .Xresources files and merge them in, startup up a window manager, -# and pop a clock and serveral xterms. -# -# Site administrators are STRONGLY urged to write nicer versions. -# -# $XFree86: xc/programs/xinit/startx.cpp,v 3.16tsi Exp $ -. /etc/profile - -unset DBUS_SESSION_BUS_ADDRESS -unset SESSION_MANAGER - -userclientrc=/etc/X11/Sessions/LinHES -userserverrc=$HOME/.xserverrc -sysclientrc=/usr/X11R6/lib/X11/xinit/xinitrc -sysserverrc=/usr/X11R6/lib/X11/xinit/xserverrc -defaultclient=/usr/X11R6/bin/xterm -defaultserver=/usr/X11R6/bin/X -defaultclientargs="" -defaultserverargs="" -clientargs="" -serverargs="" - - - - - - -if [ -f $userclientrc ]; then - defaultclientargs=$userclientrc -elif [ -f $sysclientrc ]; then - defaultclientargs=$sysclientrc -fi - - - - -if [ -f $userserverrc ]; then - defaultserverargs=$userserverrc -elif [ -f $sysserverrc ]; then - defaultserverargs=$sysserverrc -fi - -whoseargs="client" -while [ x"$1" != x ]; do - case "$1" in - # '' required to prevent cpp from treating "/*" as a C comment. - /''*|\./''*) - if [ "$whoseargs" = "client" ]; then - if [ x"$clientargs" = x ]; then - client="$1" - else - clientargs="$clientargs $1" - fi - else - if [ x"$serverargs" = x ]; then - server="$1" - else - serverargs="$serverargs $1" - fi - fi - ;; - --) - whoseargs="server" - ;; - *) - if [ "$whoseargs" = "client" ]; then - clientargs="$clientargs $1" - else - # display must be the FIRST server argument - if [ x"$serverargs" = x ] && \ - expr "$1" : ':[0-9][0-9]*$' > /dev/null 2>&1; then - display="$1" - else - serverargs="$serverargs $1" - fi - fi - ;; - esac - shift -done - -# process client arguments -if [ x"$client" = x ]; then - # if no client arguments either, use rc file instead - if [ x"$clientargs" = x ]; then - client="$defaultclientargs" - else - client=$defaultclient - fi -fi - -# process server arguments -if [ x"$server" = x ]; then - # if no server arguments or display either, use rc file instead - if [ x"$serverargs" = x -a x"$display" = x ]; then - server="$defaultserverargs" - else - server=$defaultserver - fi -fi - -if [ x"$XAUTHORITY" = x ]; then - XAUTHORITY=$HOME/.Xauthority - export XAUTHORITY -fi - -removelist= - - -# set up default Xauth info for this machine -case `uname` in -Linux*) - if [ -z "`hostname --version 2>&1 | grep GNU`" ]; then - hostname=`hostname -f` - else - hostname=`hostname` - fi - ;; -*) - hostname=`hostname` - ;; -esac - -authdisplay=${display:-:0} -mcookie=`mcookie` -for displayname in $authdisplay $hostname$authdisplay; do - if ! xauth list "$displayname" | grep "$displayname " >/dev/null 2>&1; then - xauth -q << EOF -add $displayname . $mcookie -EOF - removelist="$displayname $removelist" - fi -done - - -xinit $client $clientargs -- $server $display -logverbose 6 $serverargs - -if [ x"$removelist" != x ]; then - xauth remove $removelist -fi - - - - - -if command -v deallocvt > /dev/null 2>&1; then - deallocvt -fi - - - - - - - diff --git a/abs/core-testing/LinHES-system/LinHES.install b/abs/core-testing/LinHES-system/LinHES.install deleted file mode 100644 index 0f6689e..0000000 --- a/abs/core-testing/LinHES-system/LinHES.install +++ /dev/null @@ -1,98 +0,0 @@ -# This is a default template for a post-install scriptlet. You can -# remove any functions you don't need (and this header). - -# arg 1: the new package version -pre_install() { -/bin/true -} - -# arg 1: the new package version -post_install() { -MVDIR=/usr/LH/bin -# ln -s $MVDIR/backup_job /etc/cron.daily/backup_cron -# ln -s $MVDIR/update_system /etc/cron.daily/xupdate_system_cron -# ln -s $MVDIR/repo_sync.sh /etc/cron.daily/zrepo_sync.sh - if [ ! -e /etc/cron.daily/myth_mtc.sh ] - then - ln -s $MVDIR/myth_mtc.sh /etc/cron.daily/myth_mtc.sh - fi - -#LINE="mythtv ALL = NOPASSWD: /sbin/sv stop mythbackend" -LINE="mythtv ALL=(ALL) NOPASSWD: ALL" -LINE1="%wheel ALL=(ALL) NOPASSWD: ALL" - - -for i in "$LINE" "$LINE1" "$LINE2" "$LINE3" "$LINE4" "$LINE5" "$LINE7" "$LINE8" "$LINE9" "$LINE10" "$LINE11" "$LINE12" "$LINE13" "$LINE14" "$LINE15" "$LINE16" -do - cp /etc/sudoers /etc/sudoers.bak - grep -q "$i" /etc/sudoers - if [ $? != 0 ] - then - echo "$i" >> /etc/sudoers - visudo -cf /etc/sudoers - if [ ! $? = 0 ] - then - cp /etc/sudoers.bak /etc/sudoers - echo $i - echo "Error adding files" - exit 1 - fi - fi -done - -REALTIME="session required pam_limits.so" -grep -q "pam_limits.so" /etc/pam.d/su - if [ $? != 0 ] - then - echo "$REALTIME" >> /etc/pam.d/su - - fi - -# Update mythtv's fluxbox keys files to use the tvterm.sh script to get -# an xterm. Then signal fluxbox to re-read the keys file. - -sed -i.orig 's/^Mod1 x :.*xterm.*$/Mod1 x :ExecCommand tvterm.sh/g' \ - ~mythtv/.fluxbox/keys -pkill -HUP fluxbox - -} - -# arg 1: the new package version -# arg 2: the old package version -pre_upgrade() { - if [ -e /etc/cron.daily/backup_cron ] - then - rm -f /etc/cron.daily/backup_cron - fi - if [ -e /etc/cron.daily/xupdate_system_cron ] - then - rm -f /etc/cron.daily/xupdate_system_cron - fi - - if [ -e /etc/cron.daily/myth_mtc.py ] - then - rm -f /etc/cron.daily/myth_mtc.py - fi - - -} - -# arg 1: the new package version -# arg 2: the old package version -post_upgrade() { - post_install -} - -# arg 1: the old package version -pre_remove() { - /bin/true -} - -# arg 1: the old package version -post_remove() { - /bin/true -} - -op=$1 -shift -$op $* diff --git a/abs/core-testing/LinHES-system/PKGBUILD b/abs/core-testing/LinHES-system/PKGBUILD deleted file mode 100755 index 0e699f4..0000000 --- a/abs/core-testing/LinHES-system/PKGBUILD +++ /dev/null @@ -1,56 +0,0 @@ -pkgname=LinHES-system -pkgver=1.1 -pkgrel=32 -arch=('i686') -MVDIR=$startdir/pkg/usr/LH -BINDIR=$startdir/pkg/usr/bin -install=LinHES.install -pkgdesc="scripts and things related to having a automated system" -depends=(linhes-sounds xdotool) -backup=(etc/modprobe.d/alsa-base) -binfiles="LinHES-start optimize_mythdb.py myth_mtc.py myth_mtc.sh LinHES-run firstboot.sh load-modules-mythvantage.sh unclutter-toggle.sh tvterm.sh myth_mtc.lr smolt.cron mythfrontend-start" - -source=(LinHES-session LinHES-profile.sh $binfiles alsa-base) - -build() { - cd $startdir/src - install -m755 -D LinHES-session $startdir/pkg/etc/X11/Sessions/LinHES - install -m755 -D LinHES-profile.sh $startdir/pkg/etc/profile.d/LinHES-profile.sh - ####### install to /usr/LH/bin - for i in $binfiles - do - item=$i - install -m755 -D $item $MVDIR/bin/$item - echo $item - done - - cd $startdir/bin - for i in * - do - item=$i - install -m755 -D $item $MVDIR/bin/$item - echo $item - done - - install -m755 -D $startdir/src/alsa-base $startdir/pkg/etc/modprobe.d/alsa-base - install -m755 -D $startdir/src/smolt.cron $startdir/pkg/etc/cron.weekly/smolt.cron - mkdir $startdir/pkg/etc/logrotate.d - cp $startdir/myth_mtc.lr $startdir/pkg/etc/logrotate.d -} - - -md5sums=('19934a456d0e112298b8aac3279f9a16' - '5881bdb43d578ec3a79d1f77ea58a3db' - 'a875ee97f86e46f34a741c2bc455f894' - 'cdcbc530224215f8fcf7ebcd93d7eb0b' - 'c60b6c66f498809a6e5ca18a8c97d336' - 'ccae1296ef248fa52ec3a7cb820a476e' - 'b58b59c05faeefd4acbbb7876215c875' - '18a884a73344ff6eb74f63b49745e0f5' - 'dc3eef2a624754e16805d72bbe488b67' - 'dc0be354ce77ba2b89868fc29b942c43' - '542e670e78d117657f93141e9689f54d' - 'f1870a9522c79e6b248fcbf81dec3280' - 'abe887472a170bd1a8e6da6a7b7e93e4' - '752488eb8bfb672ce0e4c924f7faf3d1' - 'eb879fee9603a05d5420d4ce8ed9e450') diff --git a/abs/core-testing/LinHES-system/alsa-base b/abs/core-testing/LinHES-system/alsa-base deleted file mode 100644 index bf99ac3..0000000 --- a/abs/core-testing/LinHES-system/alsa-base +++ /dev/null @@ -1,10 +0,0 @@ -# Prevent abnormal drivers from grabbing index 0 -options bt87x index=-2 -options cx88_alsa index=-2 -options saa7134-alsa index=-2 -options snd-atiixp-modem index=-2 -options snd-intel8x0m index=-2 -options snd-via82xx-modem index=-2 -options snd-usb-audio index=-2 -options snd-usb-usx2y index=-2 -options snd-usb-caiaq index=-2 diff --git a/abs/core-testing/LinHES-system/bin/backupcommon b/abs/core-testing/LinHES-system/bin/backupcommon deleted file mode 100644 index d112341..0000000 --- a/abs/core-testing/LinHES-system/bin/backupcommon +++ /dev/null @@ -1,382 +0,0 @@ -#!/bin/bash - -. /usr/LH/bin/library.sh || { - echo 1>&2 "Can not load common library!" - exit 1 -} - -# You need to be root at least via sudo for the backup utilities to work. -must_be_root - -#---------------------------------------------------------------------------- -DATABASE="mythconverg" -DATABASE_DIR="/data/srv/mysql/$DATABASE" -BACKUP_LIST="./root ./home ./etc - ./var/lib/alsa/asound.state" -RESTORE_LIST="./root ./home ./etc/mythtv/modules ./etc/lirc - ./etc/X11/xorg.conf ./etc/asound.conf ./etc/default/aumix - ./var/lib/alsa/asound.state ./etc/mplayer/mplayer.conf - ./etc/localtime ./etc/timezone ./etc/asound.state" -# Both BLACK_LIST and IGNORE_LIST need to have only one file per line -# They also can't have any extra whitespace... -# Files and directories we should refuse to restore -BLACK_LIST='./etc/fstab -./etc/modules -./proc -./dev -./lib -./var/lib -./myth -./myth/backup -./home/mythtv/.my.cnf -./root/.my.cnf -./home/mythtv/.Xauthority -./root/.Xauthority' -# Files we ignore as differences -IGNORE_LIST='./home/mythtv/.upgrade -./home/mythtv/.configure -./home/mythtv/.newcard -./home/mythtv/.xscreensaver -./home/mythtv/appletrailer.xml -./root/ati-driver-installer-8-01-x86.x86_64.run -./root/ati-driver-installer-8-3-x86.x86_64.run -./root/mythstreamweb.tar -./home/mythtv/.Xauthority -./root/.Xauthority' -BACKUP_DIR="/myth/backup" -BACKUP_EXTRAS="$BACKUP_DIR/backup.list" -RESTORE_EXTRAS="$BACKUP_DIR/restore.list" -BACKUP_TAR="$BACKUP_DIR/savedfiles.tar" -BACKUP_SQL="$BACKUP_DIR/$DATABASE.sql" -#DROP_SQL="/usr/local/share/knoppmyth/drop.sql" -UTIL_DIR="/usr/LH/bin" -# Do we really still need to update from myth-0.11 to myth-0.12 ? -UPDATE_SQL="/usr/share/mythtv/sql/0.11-to-0.12.sql" -UPDATE_FILES="$UTIL_DIR/restore_fixups.sh" -COMPRESSION=".gz" -SOUNDS="/usr/share/sounds" -SILENCE="$SOUNDS/half_second_of_silence.wav" -PLAYER="/usr/bin/aplay" -#---------------------------------------------------------------------------- -AWK=/bin/awk -BASH=/bin/bash -BUNZIP2=/bin/bunzip2 -BZIP2=/bin/bzip2 -CAT=/bin/cat -CHMOD=/bin/chmod -CHOWN=/bin/chown -EGREP=/bin/egrep -GREP=/bin/grep -GUNZIP=/bin/gunzip -GZIP=/bin/gzip -LS=/bin/ls -MV=/bin/mv -RM=/bin/rm -SED=/bin/sed -TAR=/bin/tar -TR=/bin/tr -DIFF=/usr/bin/diff -FIND=/usr/bin/find -MD5SUM=/usr/bin/md5sum -MYISAMCHK=/usr/bin/myisamchk -MYSQL=/usr/bin/mysql -MYSQLADMIN=/usr/bin/mysqladmin -MYSQLDUMP=/usr/bin/mysqldump -MYTHSHUTDOWN=/usr/bin/mythshutdown -SORT=/usr/bin/sort -WC=/usr/bin/wc -SV=/sbin/sv - -#---------------------------------------------------------------------------- - -require file+r+x $AWK $BASH $BUNZIP2 $BZIP2 $CAT $CHMOD $CHOWN $EGREP $GREP \ - $GUNZIP $GZIP $LS $MV $RM $SED $TAR $TR $DIFF $FIND $MD5SUM \ - $MYISAMCHK $MYSQL $MYSQLADMIN $MYSQLDUMP $MYTHSHUTDOWN \ - $SORT $WC $SV - -#require file+r "$DROP_SQL" - -require dir+r+w+x /tmp "$BACKUP_DIR" "$DATABASE_DIR" - -play_sound () { - ($PLAYER $SILENCE $SOUNDS/$1 >& /dev/null)& -} - -# Filter against an exclude list like the black list or the ignore list above -filter_list () { - $GREP -vxF "$*" | - $SORT -u -} - -# Some people just can't read or follow directions... :-/ -# This should track the directory names in the default backup list above -# We also use this to short circuit a certain incredibly dumb stunt -filter_redundant () { - filter_list "$($TR -s ' ' '\n' <<<"$BACKUP_LIST ./myth")" | - $EGREP -v '^\./(root|home|etc|myth)/' | - $SORT -u -} - -get_extras () { - # One entry per line, and normalize the prefix - $TR ' ' '\n' <"$1" | - $AWK '/^$/ {next} - /^\.\// {print $0 ; next} - /^\// {print "." $0 ; next} - { print "./" $0}' -} - -[ -f "$BACKUP_EXTRAS" ] && - BACKUP_LIST="$BACKUP_LIST $(get_extras $BACKUP_EXTRAS | - filter_redundant)" - -[ -f "$RESTORE_EXTRAS" ] && - RESTORE_LIST="$RESTORE_LIST $(get_extras $RESTORE_EXTRAS | - filter_list "$BLACK_LIST")" - -# Build tar exclusion parameters out of $BLACK_LIST -EXCLUSION="" -case $0 in -*restore) - for file in $BLACK_LIST ; do - EXCLUSION="$EXCLUSION --exclude $file " - done - ;; -*) - ;; -esac - -shrink () { - case "$COMPRESSION" in - .gz) - $GZIP -9 "$@" - ;; - .bz2) - $BZIP2 -9 "$@" - ;; - *) - ;; - esac -} - -expand () { - case "$*" in - *.gz) - $GUNZIP "$@" - ;; - *.bz2) - $BUNZIP2 "$@" - ;; - -c\ *) - $CAT $2 /dev/null - ;; - -t\ *) - return 0 - ;; - *) - echo 1>&2 "Error, unknown file type!" - return 1 - ;; - esac -} - -single_format () { - candidates=$($LS -1 "$1.gz" "$1.bz2" "$1" 2>/dev/null) - case $($WC -l <<<"$candidates") in - 1) return 0 # One is good! - ;; - 0) echo "Error, no $1 found!" - return 1 - ;; - *) echo "Warning, multiple formats for $1 found!" - echo "Candidates are: $candidates" - ;; - esac -} - -compression_type () { - for compression in .gz .bz2 "" ; do - if [ -f "$1$compression" ] ; then - echo "$compression" - return 0 - fi - done - return 1 -} - -backup_roller () { # Gets the rollover sequence to use. - prev_i=$1 ; shift - for i in "$@" ; do - for c in .gz .bz2 "" ; do - for f in $BACKUP_SQL $BACKUP_TAR ; do - $RM -f $f$c$prev_i - if [ -f "$f$c$i" ] ; then - echo "Moving $f$c$i to $f$c$prev_i" - $MV -f $f$c$i $f$c$prev_i - fi - done - done - prev_i="$i" - done -} - -# Given "subset A B" return true if is A a subset of B -subset () { - cnt=$($DIFF $1 $2 | $GREP '^<' | $WC -l) - [ "$cnt" -eq 0 ] && return 0 - $DIFF $1 $2 -} - -mysql_cmd () { - $MYSQL -u root $DATABASE -sBe "$*" -} - -mysql_stdin () { - $MYSQL -u root $DATABASE -sB -} - -check_files () { - OBJECT_LIST="$*" - LIVE_FILES=/tmp/live_files_$$ - SAVED_FILES=/tmp/saved_files_$$ - - echo "Checking for the existance of the backup tar file..." - single_format "$BACKUP_TAR" - c=$(compression_type "$BACKUP_TAR") || - { echo "Error, missing tar file - '$BACKUP_TAR$c'." ; return 1 ; } - echo "Using file $BACKUP_TAR$c" - echo "Backup tar file exists. Checking the compression..." - expand -t $BACKUP_TAR$c || - { echo "Error, bad compressed tarball - '$BACKUP_TAR$c'." ; return 1 ; } - echo "Compression looks OK. Checking backup tar file contents..." - - echo "Generating a list of the backup contents..." - { - expand -c $BACKUP_TAR$c | - $TAR tf - $OBJECT_LIST $EXCLUSION | - $SED '/\/$/s///' | - filter_list "$IGNORE_LIST" >$SAVED_FILES - } 2>&1 | $SED -e '/Error exit delayed from previous errors/d' - - echo "Generating a list of the directory contents..." - cd / - $FIND $OBJECT_LIST \( -type d -or -type f -or -type l \) -print | - filter_list "$IGNORE_LIST" >$LIVE_FILES - - echo "Comparing directory versus backup contents..." - case $0 in - *backup) # backup must contain everything selected from the directories - subset $LIVE_FILES $SAVED_FILES - ;; - *restore) # directories must contain everything selected from the backup - subset $SAVED_FILES $LIVE_FILES - ;; - *) - $DIFF $LIVE_FILES $SAVED_FILES - ;; - esac - FILE_STATUS=$? - $RM $LIVE_FILES $SAVED_FILES - if [ $FILE_STATUS -eq 0 ] ; then - echo "Live and saved file lists match." - else - echo "Warning, file lists are not identical!" - fi - return $FILE_STATUS -} - -has_records () { - filename="$1" - description="$2" - if [ $($WC -l < "$filename") -eq 0 ] ; then - echo "Warning, could not get record counts from $description!" - return 1 - fi - if [ $($AWK '{cnt+=$2} END {print cnt}' < "$filename") -eq 0 ] ; then - echo "Warning, total record count from $description is zero!" - return 1 - fi - return 0 -} - -check_tables () { - LIVE_TABLES=/tmp/live_tables_$$ - SAVED_TABLES=/tmp/saved_tables_$$ - - echo "Checking for the existance of the DB dump file..." - single_format "$BACKUP_SQL" - c=$(compression_type "$BACKUP_SQL") || - { echo "Error, missing DB dump - '$BACKUP_SQL$c'" ; return 1 ; } - echo "Using file $BACKUP_SQL$c" - echo "DB dump file exists. Checking the compression..." - expand -t $BACKUP_SQL$c || - { echo "Error, bad compressed DB dump - '$BACKUP_SQL$c'." ; return 1 ; } - echo "Compression looks OK. Checking DB dump contents..." - - echo "Generating a list of tables and record counts in the DB dump..." - expand -c "$BACKUP_SQL$c" | - $AWK '/CREATE TABLE/ { tbl = $3; gsub("`","",tbl); records[tbl] = 0; } \ - /INSERT INTO/ { tbl = $3; gsub("`","",tbl); \ - n = split(substr($0,index($0,"VALUES (")+7),vals,"\\),\\("); \ - records[tbl] += n; } \ - END { for (tbl in records) print tbl, records[tbl]; }' | - $SED 's/mythlog [0-9]*/mythlog 0/' | - $SORT >$SAVED_TABLES - has_records "$SAVED_TABLES" "DB dump" || return 1 - - echo "Generating a list of tables and record counts in the live DB..." - for tbl in $(mysql_cmd "show tables") ; do - mysql_cmd "select '$tbl', count(*) from $tbl" - done | - $TR -s '\t' ' ' | - $SED 's/mythlog [0-9]*/mythlog 0/' | - $SORT >$LIVE_TABLES - has_records "$LIVE_TABLES" "live DB" || return 1 - - echo "Comparing live versus saved tables..." - case $0 in - *restore) # database must include everything from the backup - subset $SAVED_TABLES $LIVE_TABLES - ;; - *) # backup must exactly match the database - $DIFF $LIVE_TABLES $SAVED_TABLES - ;; - esac - TABLE_STATUS=$? - $RM $LIVE_TABLES $SAVED_TABLES - if [ $TABLE_STATUS -eq 0 ] ; then - echo "Live and saved table lists match." - else - echo "Warning, table lists are not identical!" - fi - return $TABLE_STATUS -} - -check_files_and_tables () { - STATUS=0 - echo - check_files "$@" || STATUS=1 - echo - check_tables || STATUS=1 - echo - return $STATUS -} - -stop_mysqld () { $SV stop mysql ; } -start_mysqld () { - $SV start mysql - for t in 1 2 4 8 ; do - ready=$(mysql_cmd 'select 1 from dual' 2>/dev/null) - [ "$ready" = "1" ] && break - sleep "$t" - done - [ "$ready" != "1" ] && echo "Error, DB not available after 15 seconds!" -} - -stop_mythbackend () { $SV stop mythbackend ; } -start_mythbackend () { $SV start mythbackend ; } - -lock_myth () { $MYTHSHUTDOWN --lock ; } -unlock_myth () { $MYTHSHUTDOWN --unlock ; } - -true # Make sure that this shows success diff --git a/abs/core-testing/LinHES-system/bin/checkbackup b/abs/core-testing/LinHES-system/bin/checkbackup deleted file mode 100755 index b6d8587..0000000 --- a/abs/core-testing/LinHES-system/bin/checkbackup +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/bash - -#---------------------------------------------------------------------------- -. /usr/LH/bin/backupcommon || { - echo 1>&2 "Can not load common settings!" - exit 1 -} -#---------------------------------------------------------------------------- - -if check_files_and_tables $BACKUP_LIST ; then - echo "Backup passes all checks." - exit 0 -else - echo "The backup is bad or already out of date!" - exit 1 -fi diff --git a/abs/core-testing/LinHES-system/bin/checkrestore b/abs/core-testing/LinHES-system/bin/checkrestore deleted file mode 100755 index ef0360c..0000000 --- a/abs/core-testing/LinHES-system/bin/checkrestore +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/bash - -#---------------------------------------------------------------------------- -. /usr/LH/bin/backupcommon || { - echo 1>&2 "Can not load common settings!" - exit 1 -} -#---------------------------------------------------------------------------- - -if check_files_and_tables $RESTORE_LIST ; then - echo "Restore passes all checks." - exit 0 -else - echo "The restore failed or was already modified!" - exit 1 -fi diff --git a/abs/core-testing/LinHES-system/bin/library.sh b/abs/core-testing/LinHES-system/bin/library.sh deleted file mode 100755 index 2049de3..0000000 --- a/abs/core-testing/LinHES-system/bin/library.sh +++ /dev/null @@ -1,164 +0,0 @@ -msg () { # A status reporting function - [ "${VERBOSE:-0}" -gt 0 ] && echo "$*" -} - -error () { # An error reporting function - echo 1>&2 "$*" -} - -fatal () { # Report an error and exit with a failure code - error "$*" - exit 1 -} - -# The only non builtin this uses is tr... -require () { # Check prerequisites - e=0 - props="$1" ; shift - for obj in "$@" ; do - [ -z "$obj" ] && continue # Too late to do anything itelligent... - problems="" - for prop in $(/bin/tr '+,' ' ' <<<"$props") ; do - case "$prop" in - e|exists) # kind of useless... - [ -e "$obj" ] || problems="$problems, does not exist" ;; - f|file) - [ -f "$obj" ] || problems="$problems, is not a file" ;; - d|dir) - [ -d "$obj" ] || problems="$problems, is not a directory" ;; - l|symlink) - [ -L "$obj" ] || problems="$problems, is not a symlink" ;; - nosymlink) - [ -L "$obj" ] && problems="$problems, is a symlink" ;; - r|readable) - [ -r "$obj" ] || problems="$problems, is not readable" ;; - w|writable) - [ -w "$obj" ] || problems="$problems, is not writable" ;; - x|executable) - [ -x "$obj" ] || problems="$problems, is not executable" ;; - *) - fatal "Programmer error, unknown property: '$prop'" ;; - esac - done - if [ -n "$problems" ] ; then - error "Error: '$obj'$problems." - e=1 - fi - done - [ "$e" -ne 0 ] && fatal "Errors noted above are fatal." -} - -require file+r+x /bin/bash /bin/grep /bin/rm /bin/tr \ - /usr/bin/basename /usr/bin/env \ - /usr/bin/mysql /usr/bin/sort - -if [ -n "$DEBUG" ] ; then - for debug_opt in $(/bin/tr ',' ' ' <<<"$DEBUG") ; do - echo '============================================================' - echo "==== $debug_opt" - - # Note that the order you specifiy these debug options in matters. - # I recommend always listing log first. For example: - # export DEBUG=log,env,set,trace - case "$debug_opt" in - env) /usr/bin/env | /usr/bin/sort ;; - set) set ;; - trace) set -vx ;; - log) logfile="/tmp/$(/usr/bin/basename $0).$$.debug" - /bin/rm -f "$logfile" # Try to avoid privilege escalation bugs - echo "Redirecting stdout and stderr to '$logfile'" - exec >"$logfile" 2>&1 ;; - *) error "Unknown debug option '$debug_opt'" ;; - esac - done - echo '============================================================' -fi - -must_be_root () { # For things which must be run as root - [ $(/usr/bin/id -u) -ne 0 ] && fatal "You must run this script as root!" -} - -must_be_mythtv () { # For things which must be run as mythtv (su if possible) - case $(/usr/bin/id -nu) in - mythtv) ;; # Continue - root) /bin/su - mythtv -c "$0 $*" ; exit $? ;; - *) fatal "You must run this script at mythtv or root!" ;; - esac -} - -# Use a variable so you can override it. -DATABASE="mythconverg" - -mysql_cmd () { # Execute SQL from the command line - /usr/bin/mysql -u root "$DATABASE" -sBe "$*" -} - -mysql_stdin () { # Execute SQL from stdin - /usr/bin/mysql -u root "$DATABASE" -sB -} - -machine_clause () { # Helper function - if [ -z "$1" ] ; then - echo "(hostname = '' or hostname is null)" - else - echo "hostname = '$1'" - fi -} - -get_all_setting_names () { # List setting names - case "$#" in - 0) MACHINE_CLAUSE="" ;; - 1) MACHINE_CLAUSE="where $(machine_clause "$1")" ;; - *) fatal "Programmer error, get_all_names must be passed 0 or 1 args, got $#" ;; - esac - mysql_cmd "select distinct value from settings $MACHINE_CLAUSE order by value" -} - -get_all_setting_values () { # List settings - case "$#" in - 0) MACHINE_CLAUSE="" ;; - 1) MACHINE_CLAUSE="where $(machine_clause "$1")" ;; - *) fatal "Programmer error, get_all_values must be passed 0 or 1 args, got $#" ;; - esac - mysql_cmd "select value, data, hostname from settings $MACHINE_CLAUSE order by hostname, value, data" -} - -get_setting_value () { # Get the data for a setting (may return multiples!) - case "$#" in - 1) MACHINE_CLAUSE="" ;; - 2) MACHINE_CLAUSE="and $(machine_clause "$2")" ;; - *) fatal "Programmer error, get_value must be passed 1 or 2 args, got $#" ;; - esac - mysql_cmd "select data from settings where value = '$1' $MACHINE_CLAUSE" -} - -set_setting_value () { # Insert or update aome setting - case "$#" in - 2) RECORD_CNT=$(get_value "$1" | wc -l) ;; - 3) RECORD_CNT=$(get_value "$1" "$3" | wc -l) ;; - *) fatal "Programmer error, set_value must be passed 2 or 3 args, got $#" ;; - esac - MACHINE_CLAUSE="" - if [ "$RECORD_CNT" -eq 0 ] ; then - [ -n "$3" ] && MACHINE_CLAUSE=", $(machine_clause "$3")" - mysql_cmd "insert into settings set value = '$1', data = '$2' $MACHINE_CLAUSE" - else - [ "$#" -eq 3 ] && MACHINE_CLAUSE="and $(machine_clause "$3")" - mysql_cmd "update settings set data = '$2' where value = '$1' $MACHINE_CLAUSE" - fi -} - -delete_setting_value () { # Totally remove some setting - case "$#" in - 1) MACHINE_CLAUSE="" ;; - 2) MACHINE_CLAUSE="and $(machine_clause "$2")" ;; - *) fatal "Programmer error, get_value must be passed 1 or 2 args, got $#" ;; - esac - mysql_cmd "delete from settings where value = '$1' $MACHINE_CLAUSE" -} - -# Filter against a newline seperated exclude list -filter_list () { - /bin/grep -vxF "$*" | - /usr/bin/sort -u -} diff --git a/abs/core-testing/LinHES-system/bin/mythbackup b/abs/core-testing/LinHES-system/bin/mythbackup deleted file mode 100755 index 3b4edd4..0000000 --- a/abs/core-testing/LinHES-system/bin/mythbackup +++ /dev/null @@ -1,113 +0,0 @@ -#!/bin/bash - -#---------------------------------------------------------------------------- -. /usr/LH/bin/backupcommon || { - echo 1>&2 "Can not load common settings!" - exit 1 -} - -. /etc/osd_cat.cfg || { - color=yellow - outline=2 - outlinecolour=black - shadow=0 - shadowcolour=black - font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" -} -#---------------------------------------------------------------------------- - -# Function to display status onscreen -osd() -# Arg_1 = display text Arg_2 = delay time Arg_3 = line num -{ - TEXT=$1 - killall -9 osd_cat - if [ $3 -gt 1 ]; then - for ((i=2; i <= $3 ; i++)) - do - TEXT="\n"$TEXT - done - fi - printf "$TEXT" | osd_cat --lines=6 --pos=middle --align=center --delay=$2 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font & -} - -# Prevent mythshutdown from shutting down the system in the middle... -lock_myth - -# Play a sound to let you know I'm starting. -play_sound init.wav - -# Keep a chain of recent backups, -export DISPLAY=:0.0 -osd "Rolling over old backups..." 0 1 -echo "Starting rollover of old backups, this may take a while..." -[ -f "$BACKUP_SQL" ] && shrink $BACKUP_SQL -[ -f "$BACKUP_TAR" ] && shrink $BACKUP_TAR -backup_roller .19 .18 .17 .16 .15 .14 .13 .12 .11 .10 .9 .8 .7 .6 .5 .4 .3 .2 .1 '' -echo "Rollover completed." - -osd "Checking the database..." 0 2 -# Start with the database backup, first we make sure it's healthy, and -# then we can dump it. -# Doing this while the backend is active would be BAD. -stop_mythbackend - -# Stop, check, and fix $DATABASE db to ensure clean copy, then restart it. -stop_mysqld -cd $DATABASE_DIR -$MYISAMCHK -f *.MYI -start_mysqld - -osd "Backing up database..." 0 3 -# Dumps the $DATABASE database -$MYSQLDUMP -v -c -u root $DATABASE > $BACKUP_SQL -shrink $BACKUP_SQL - -osd "Backing up files..." 0 4 -# Now to backup the other files, no fooling around, grab everything in the -# list because you never know what you'll want, and we can always get clever -# about what to restore later... - -# gather all the things in the list into a nice tidy bundle -cd / -$TAR cvf $BACKUP_TAR $BACKUP_LIST 2>&1 | - $SED -e '/Error exit delayed from previous errors/d' -shrink $BACKUP_TAR - -# If you can't read this you've got no business restoring from it anyway. -$CHOWN root:root $BACKUP_TAR* $BACKUP_SQL* -$CHMOD go-rwx $BACKUP_TAR* $BACKUP_SQL* - -osd "Testing backup..." 0 5 -echo "Sanity checking your backup..." -play_sound testing.wav -# Play a sound to let you know the outcome. -if check_files_and_tables $BACKUP_LIST ; then - osd "Backup completed successfully." 5 6 - echo "Backup passes all checks." - COMPLETE_MSG="Last backup completed on `date '+%D @ %-I:%M %p'`" - play_sound complete.wav - STATUS=0 -else - osd "Backup FAILED." 5 6 - echo "The backup is bad or already out of date!" - COMPLETE_MSG="Last backup FAILED on `date '+%D @ %-I:%M %p'`" - play_sound fail.wav - STATUS=1 -fi - -# Add Last backup status to menu item -if grep "<description>" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml >/dev/null 2>&1 -then - sed -i "s_\<description\>.*\<description\>_description\>$COMPLETE_MSG\<\/description_" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml -else - sed -i.orig " /NONE/ i\ \<description\>$COMPLETE_MSG\<\/description\>" /usr/share/mythtv/themes/defaultmenu/mythbackup.xml -fi - -# Now we can restart the backend. -start_mythbackend - -# Unlock the system again... -unlock_myth - -exit $STATUS diff --git a/abs/core-testing/LinHES-system/bin/mythrestore b/abs/core-testing/LinHES-system/bin/mythrestore deleted file mode 100755 index 447b0b8..0000000 --- a/abs/core-testing/LinHES-system/bin/mythrestore +++ /dev/null @@ -1,137 +0,0 @@ -#!/bin/bash - -#---------------------------------------------------------------------------- -. /usr/LH/bin/backupcommon || { - echo 1>&2 "Can not load common settings!" - exit 1 -} - -. /etc/osd_cat.cfg || { - color=yellow - outline=2 - outlinecolour=black - shadow=0 - shadowcolour=black - font="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" -} -#---------------------------------------------------------------------------- - -# Function to display status onscreen -osd() -# Arg_1 = display text Arg_2 = delay time Arg_3 = line num -{ - TEXT=$1 - killall -9 osd_cat - if [ $3 -gt 1 ]; then - for ((i=2; i <= $3 ; i++)) - do - TEXT="\n"$TEXT - done - fi - printf "$TEXT" | osd_cat --lines=6 --pos=middle --align=center --delay=$2 --color=$color --outline=$outline --outlinecolour=$outlinecolour --shadow=$shadow --shadowcolour=$shadowcolour --font=$font & -} - -do_file_updates() { # A function because we need to do this in two places - echo "Doing any needed file updates..." - [ -n "$UPDATE_FILES" -a -f "$UPDATE_FILES" -a -x "$UPDATE_FILES" ] && - "$UPDATE_FILES" -} - -do_db_updates() { - # We need to redo this since we just restored the old settings... - lock_myth - # This is gross, but makes sure that the lock count has a sane value... - mysql_cmd "update settings set data = '1' where value = 'MythShutdownLock'" - - # Clean up ambiguous schema version settings... - for val in $(mysql_cmd "select distinct value from settings where value like '%SchemaVer'") ; do - # Find the numeric maximum version for this schema - max_ver=$(mysql_cmd "select max(0 + ifnull(data, 0)) from settings where value = '$val'") - # Wipe out all the existing ones - mysql_cmd "delete from settings where value = '$val'" - # Insert a nice clean unique one. - mysql_cmd "insert into settings set value = '$val', data = '$max_ver'" - done - - # This table causes problems with mythweb on upgrades... - mysql_cmd "update settings set data = '0' where value = 'WebDBSchemaVer'" - mysql_cmd "drop table mythweb_sessions" >/dev/null 2>&1 -} - -# Let's prevent mythshutdown from shutting down the system. -lock_myth - -# Play a sound to let you know I'm starting. -play_sound restore.wav -export DISPLAY=:0.0 - -# Doing this while the backend is active could be BAD. -stop_mythbackend - -# If the standard backup file exists we try to restore the files based -# on our restore list. -if compression=$(compression_type "$BACKUP_TAR") ; then - osd "Restoring files..." 0 1 - echo "Starting the restore of files..." - cd / - expand -c $BACKUP_TAR$compression | - $TAR xpvf - $RESTORE_LIST $EXCLUSION 2>&1 | - $SED -e '/Error exit delayed from previous errors/d' - echo "Completed the restore of files." -fi - -# If the db backup file exists start the DB restore and upgrade -if compression=$(compression_type "$BACKUP_SQL") ; then - echo "Starting the DB restore, this can take a while..." - echo "Clearing out the existing skeleton..." - #mysql_stdin < $DROP_SQL - osd "Recreating database..." 0 2 - echo "Recreating the db..." - sleep 1 - $MYSQLADMIN -u root create $DATABASE - osd "Restoring database..." 0 3 - echo "Restoring the data (long)..." - expand -c $BACKUP_SQL$compression | mysql_stdin - echo "Doing any needed db updates..." - [ -n "$UPDATE_SQL" -a -f "$UPDATE_SQL" ] && - mysql_stdin < $UPDATE_SQL - echo "Completed the DB restore." -fi - -osd "Testing restore..." 0 4 -echo "Sanity checking your restore..." -play_sound vr.wav -# Play a sound to let you know the outcome. -if check_files_and_tables $RESTORE_LIST ; then - osd "Restore completed successfully." 5 5 - echo "Restore passes all checks." - COMPLETE_MSG="Last restore completed on `date '+%D @ %-I:%M %p'`" - play_sound restored.wav - STATUS=0 -else - osd "Restore FAILED." 5 5 - echo "The restore failed or was already modified!" - COMPLETE_MSG="Last restore FAILED on `date '+%D @ %-I:%M %p'`" - play_sound rf.wav - STATUS=1 -fi - -# Add Last restore status to menu item -if grep "<description>" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml >/dev/null 2>&1 -then - sed -i "s_\<description\>.*\<description\>_description\>$COMPLETE_MSG\<\/description_" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml -else - sed -i.orig " /NONE/ i\ \<description\>$COMPLETE_MSG\<\/description\>" /usr/share/mythtv/themes/defaultmenu/mythrestore.xml -fi - -# Make any updates _after_ we verify the backup... -do_db_updates -do_file_updates - -#post restore fixup for sshd -/usr/MythVantage/bin/systemconfig.py -m user - -# Now it's more or less safe to restart the backend. -start_mythbackend - -exit $STATUS diff --git a/abs/core-testing/LinHES-system/bin/rollback.sh b/abs/core-testing/LinHES-system/bin/rollback.sh deleted file mode 100755 index 12897da..0000000 --- a/abs/core-testing/LinHES-system/bin/rollback.sh +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/bash - -#---------------------------------------------------------------------------- -. /usr/LH/bin/backupcommon || { - echo 1>&2 "Can not load common settings!" - exit 1 -} -#---------------------------------------------------------------------------- - -require file+r+x $MYTHSHUTDOWN - -# Prevent mythshutdown from shutting down the system in the middle... -lock_myth - -echo "Starting rollback of old backups" -backup_roller '' .1 .2 .3 .4 .5 .6 .7 .8 .9 .10 .11 .12 .13 .14 .15 .16 .17 .18 .19 -echo "Rollback completed." - -# Unlock the system again... -unlock_myth diff --git a/abs/core-testing/LinHES-system/firstboot.sh b/abs/core-testing/LinHES-system/firstboot.sh deleted file mode 100755 index 7e2f603..0000000 --- a/abs/core-testing/LinHES-system/firstboot.sh +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/bash -. ~/.configured -ATTEMPT=0 - -function try_smolt { - ((ATTEMPT=ATTEMPT+1)) - WID=`xdotool search "mythfrontend" | head -1` - xdotool windowfocus $WID - status=$? - if [ $status = 0 ] - then - sleep 2 - xdotool key "ctrl+alt+p" - xdotool key "ctrl+alt+p" - fb_status=0 - echo "FB=NO" > ~/.configured - fi - - if [ $ATTEMPT = 200 ] - then - fb_status=0 - fi - -} - - -if [ ! -e /tmp/debug ] -then - if [ ! -e /tmp/nomfe ] - then - if [ ! -e ~/.mythtv/pub-uuid ] - then - if [ x$FB != xNO ] - then - fb_status=4 - while [ $fb_status != 0 ] - do - try_smolt - if [ $fb_status != 0 ] - then - sleep 1 - fi - done - fi - fi - fi -fi - - - diff --git a/abs/core-testing/LinHES-system/load-modules-mythvantage.sh b/abs/core-testing/LinHES-system/load-modules-mythvantage.sh deleted file mode 100755 index 06c8a96..0000000 --- a/abs/core-testing/LinHES-system/load-modules-mythvantage.sh +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/bash -#/usr/bin/load-modules-mythvantage.sh UNLOAD LCD -export TERM=linux -. /etc/rc.conf -. /etc/rc.d/functions -. /etc/systemconfig -case $1 in -UNLOAD|unload ) - MODULELIST=`grep /etc/modules.mythvantage $2` - for i in $MODULELIST - do - /sbin/rmmod $i - done - - ;; - - *) printhl " Loading MythVantage-modules" - #try to load the cx88 modules - if [ ! x$SystemType = xFrontend_only ] - then - /sbin/modprobe cx88-dvb 2>/dev/null - fi - - if [ -f /etc/modules.mythvantage ] - then - while read line - do - module=`echo $line |cut -d# -f1` - #this doesn't do anything on boot cause ttySX does not yet exisit - if [ x$module = xlirc_serial ] - then - if [ x$ReceiverType = xSerial ] - then - case $ReceiverSerialport in - ttyS0) FLAGS="io=0x3f8 irq=4";; - ttyS1) FLAGS="io=0x2f8 irq=3" ;; - ttyS2) FLAGS="io=0x3e8 irq=4" ;; - ttyS3) FLAGS="io=0x2f8 irq=3" ;; - esac - /usr/bin/setserial /dev/$ReceiverSerialport uart none 2>/dev/null - if [ $? = 0 ] - then - /sbin/modprobe lirc_serial $FLAGS 2>/dev/nulla - fi - elif [ x$HostBlasterType = xSerial ] - then - case $HostSerialPort_blasterlirc in - ttyS0) FLAGS="io=0x3f8 irq=4";; - ttyS1) FLAGS="io=0x2f8 irq=3" ;; - ttyS2) FLAGS="io=0x3e8 irq=4" ;; - ttyS3) FLAGS="io=0x2f8 irq=3" ;; - esac - /usr/bin/setserial /dev/$HostSerialPort_blasterlirc uart none 2>/dev/null - if [ $? = 0 ] - then - /sbin/modprobe lirc_serial $FLAGS 2>/dev/nulla - fi - fi - fi - /sbin/modprobe $module 2> /dev/null - done < /etc/modules.mythvantage - fi -esac - diff --git a/abs/core-testing/LinHES-system/myth_mtc.lr b/abs/core-testing/LinHES-system/myth_mtc.lr deleted file mode 100644 index 23f8711..0000000 --- a/abs/core-testing/LinHES-system/myth_mtc.lr +++ /dev/null @@ -1,9 +0,0 @@ -/var/log/mythtv/myth_mtc.log { - copytruncate - daily - size 10M - missingok - rotate 7 - compress - notifempty -} diff --git a/abs/core-testing/LinHES-system/myth_mtc.py b/abs/core-testing/LinHES-system/myth_mtc.py deleted file mode 100755 index 5505b0a..0000000 --- a/abs/core-testing/LinHES-system/myth_mtc.py +++ /dev/null @@ -1,139 +0,0 @@ -#!/usr/bin/python - - -import sys,popen2 -import optparse -import re -import socket -import os -import datetime,time - - - -try: - from MythTV import MythTV - mythtv = MythTV() -except: - mythtv = None - -#print mythtv.db.getSetting( 'Theme', socket.gethostname()) - -def optimize(): - cursor = mythtv.db.cursor() - cursor.execute("SHOW tables") - result = cursor.fetchall() - ops=["REPAIR","OPTIMIZE","ANALYZE"] - for row in result: - ctable=row[0] - for op in ops: - print op,ctable - cmd= "%s table %s" %(op,ctable) - cursor.execute(cmd) - - -def upcoming_check(): - upcoming = mythtv.getUpcomingRecordings() - try: - show=str(upcoming[0]) - show=show.strip() - showtime=show.partition("(")[2].strip(")") - now=time.time() - rec_time=time.strptime( showtime ,"%Y-%m-%d %H:%M:%S" ) - r=time.mktime(rec_time) - time_diff= ( r - now ) / 60 - except: - time_diff=100 - show="No show" - if ( time_diff > 30) : - return True - else: - print show , "is upcoming in " , time_diff - return False - - -def schemalock_check(): - c = mythtv.db.cursor() - c.execute("select count(*) from schemalock") - results=c.fetchone() - schemalock=results[0] - if schemalock == 0: - return True - else: - print "schema is locked" - return False - -def job_check(): - c = mythtv.db.cursor() - c.execute("select count(*) from jobqueue where status = 4") - results=c.fetchone() - jobs= results[0] - if jobs == 0 : - return True - else: - print " jobs are running" - return False - - -def in_use(): - c = mythtv.db.cursor() - c.execute("select count(*) from inuseprograms") - results=c.fetchone() - prginuse=results[0] - if prginuse == 0 : - return True - else: - print "programs in use" - return False - -def mfd_check(): - ismfd=popen2.Popen3('/bin/ps cax|/bin/grep -v grep |/bin/grep mythfilldatabase') - ismfd.wait() - mfdIdle=ismfd.poll() - if mfdIdle == 0: - print "mythfilldatabase is running" - return False - else: - return True - - - -def idle_check(): - if ( upcoming_check() and schemalock_check() and job_check() and in_use() and mfd_check() ): - idle=True - print "Myth is idle" - else: - idle=False - print "Myth is NOT idle" - return idle - -def run_stuff(): - if idle_check(): - print "Running optimize" - optimize() - - print "Running backup" - os.system('/usr/LH/bin/backup_job') - - print "Running system_update" - os.system('/usr/LH/bin/update_system') - continue_loop=False - else: - continue_loop=True - return continue_loop - -#--------------------------------- -starttime=time.time() -ctin=True -while ctin: - ctin=run_stuff() - if ctin: - time.sleep(600) - current_time=time.time() - if (current_time - starttime) > 10800 : - ctin = False - print "time exceeded (3 hours)" - exit(1) - - - - diff --git a/abs/core-testing/LinHES-system/myth_mtc.sh b/abs/core-testing/LinHES-system/myth_mtc.sh deleted file mode 100755 index 487513b..0000000 --- a/abs/core-testing/LinHES-system/myth_mtc.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/bash -. /etc/profile -logFile='/var/log/mythtv/myth_mtc.log' -date=`date +%Y-%m-%d` - -myth_mtc.py > $logFile 2>&1 -if [ $? = 0 ] -then - echo "Finished $date" >> $logFile -else - echo "Time Exceede $date" >> $logFile -fi diff --git a/abs/core-testing/LinHES-system/mythfrontend-start b/abs/core-testing/LinHES-system/mythfrontend-start deleted file mode 100755 index c92d024..0000000 --- a/abs/core-testing/LinHES-system/mythfrontend-start +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/bash -PIDS=$(pidof mythfrontend) -P_array=( $PIDS ) -let "instances = ${#P_array[*]}" # Count elements. - -if [ $instances -gt 0 ]; -then - if [ $instances -eq 1 ]; then - diagtext="is already a MythFrontend" - else - diagtext="are already $instances MythFrontends" - fi - - question="There $diagtext running. Do you really want to start another one?" - mythvantage -q "${question}" - if [ $? = 16 ] - then - mythfrontend --logfile /var/log/mythtv/mythfrontend.log - fi -else - mythfrontend --logfile /var/log/mythtv/mythfrontend.log -fi diff --git a/abs/core-testing/LinHES-system/optimize_mythdb.py b/abs/core-testing/LinHES-system/optimize_mythdb.py deleted file mode 100755 index e7b35ed..0000000 --- a/abs/core-testing/LinHES-system/optimize_mythdb.py +++ /dev/null @@ -1,16 +0,0 @@ -#!/usr/bin/python -# import MySQL module -import MySQLdb -import socket -import sys -db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg") -cursor = db.cursor() -cursor.execute("SHOW tables") -result = cursor.fetchall() -ops=["REPAIR","OPTIMIZE","ANALYZE"] -for row in result: - ctable=row[0] - for op in ops: - print op,ctable - cmd= "%s table %s" %(op,ctable) - cursor.execute(cmd) diff --git a/abs/core-testing/LinHES-system/smolt.cron b/abs/core-testing/LinHES-system/smolt.cron deleted file mode 100644 index f418df1..0000000 --- a/abs/core-testing/LinHES-system/smolt.cron +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash -. /etc/profile -if [ -f /home/mythtv/.mythtv/MythSmolt/hw-uuid ] -then - cd /usr/share/mythtv/mythsmolt/scripts - touch /var/log/smolt.update - chown mythtv /var/log/smolt.update - random=$((RANDOM%2000)) - sleep $random - su mythtv -c "./sendProfile.py -a" > /var/log/smolt.update -fi diff --git a/abs/core-testing/LinHES-system/tvterm.sh b/abs/core-testing/LinHES-system/tvterm.sh deleted file mode 100755 index dfd116b..0000000 --- a/abs/core-testing/LinHES-system/tvterm.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash -# -# Create a terminal with a font that mostly fills the width of the screen. - -width=$(echo $(xdpyinfo | grep dimensions:) | cut -d' ' -f2 | cut -dx -f1) - -if [ -z "$width" ] ; then - width=1024 -fi - -if [ $width -ge 1920 ] ; then - fontsize=24 -elif [ $width -ge 1440 ] ; then - fontsize=21 -elif [ $width -ge 1280 ] ; then - fontsize=18 -elif [ $width -ge 1024 ] ; then - fontsize=14 -elif [ $width -ge 800 ] ; then - fontsize=11 -elif [ $width -ge 640 ] ; then - fontsize=8 -fi - -xterm -fa 'DejaVu Sans Mono' -fs $fontsize diff --git a/abs/core-testing/LinHES-system/unclutter-toggle.sh b/abs/core-testing/LinHES-system/unclutter-toggle.sh deleted file mode 100644 index aadce50..0000000 --- a/abs/core-testing/LinHES-system/unclutter-toggle.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash -PIDUNC=`pidof unclutter` -jitter=200 -idle=1 -. /etc/unclutter.cfg -if [ -n "${PIDUNC}" ]; -then - killall -9 unclutter -else - /usr/X11R6/bin/unclutter -root -idle $idle -jitter $jitter -noevents & -fi |