summaryrefslogtreecommitdiffstats
path: root/abs/core-testing/linhes-live/etc/rc.sysinit-live
diff options
context:
space:
mode:
Diffstat (limited to 'abs/core-testing/linhes-live/etc/rc.sysinit-live')
-rwxr-xr-xabs/core-testing/linhes-live/etc/rc.sysinit-live469
1 files changed, 0 insertions, 469 deletions
diff --git a/abs/core-testing/linhes-live/etc/rc.sysinit-live b/abs/core-testing/linhes-live/etc/rc.sysinit-live
deleted file mode 100755
index afdc2ae..0000000
--- a/abs/core-testing/linhes-live/etc/rc.sysinit-live
+++ /dev/null
@@ -1,469 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.sysinit
-#
-
-###
-# Based on initscripts 2008.05-1
-###
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-###############################################################
-### These functions have been separated out, so that they can be
-### replaced in linhes live systems.
-
-f_header ()
-{
- echo " "
- printhl "Arch Linux $C_OTHER(${C_H2}Core Dump$C_OTHER)\n"
- printhl "${C_H2}http://www.archlinux.org"
- printhl "Copyright 2002-2007 Judd Vinet"
- printhl "Copyright 2007-2008 Aaron Griffin"
- printhl "Distributed under the GNU General Public License (GPL)"
- printsep
-}
-
-f_fscheck ()
-{
- status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
-
- if [ -x /sbin/fsck ]; then
- stat_busy "Checking Filesystems"
- if /bin/grep -qw quiet /proc/cmdline; then
- /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1
- else
- /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null
- fi
- fsckret=$?
- if [ ${fsckret} -gt 1 ]; then
- stat_fail
- if [ $((${fsckret}&2)) -eq 2 ]; then
- echo
- echo "********************** REBOOT REQUIRED *********************"
- echo "* *"
- echo "* The system will be rebooted automatically in 15 seconds. *"
- echo "* *"
- echo "************************************************************"
- echo
- /bin/sleep 15
- else
- echo
- echo "***************** FILESYSTEM CHECK FAILED ****************"
- echo "* *"
- echo "* Please repair manually and reboot. Note that the root *"
- echo "* file system is currently mounted read-only. To remount *"
- echo "* it read-write type: mount -n -o remount,rw / *"
- echo "* When you exit the maintenance shell the system will *"
- echo "* reboot automatically. *"
- echo "* *"
- echo "************************************************************"
- echo
- /sbin/sulogin -p
- fi
- echo "Automatic reboot in progress..."
- /bin/umount -a
- /bin/mount -n -o remount,ro /
- /sbin/reboot -f
- exit 0
- fi
- stat_done
- fi
-
- stat_busy "Mounting Local Filesystems"
- /bin/mount -n -o remount,rw /
- /bin/rm -f /etc/mtab*
- # make sure / gets written to /etc/mtab
- /bin/mount -o remount,rw /
-
- f_mountlocal
- stat_done
-}
-
-f_mountlocal ()
-{
- # Write /proc, /sys and /dev to /etc/mtab
- if [ -e /proc/mounts ]; then
- /bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
- fi
- # now mount all the local filesystems
- /bin/mount -a -t $NETFS
-}
-
-f_swapon ()
-{
- status "Activating Swap" /sbin/swapon -a
-}
-
-###############################################################
-
-### Override above functions if running linhes live system
-[ -f /etc/live-sysinit ] && . /etc/live-sysinit
-
-#F Print header
-f_header
-
-# mount /proc, /sys and our RAM /dev
-/bin/mount -n -t ramfs none /dev
-/bin/mount -n -t proc none /proc
-/bin/mount -n -t sysfs none /sys
-
-# Create our default nodes that minilogd may need
-/bin/mknod /dev/null c 1 3
-/bin/mknod /dev/zero c 1 5
-/bin/mknod /dev/console c 5 1
-
-# More initial /dev setup that udev doesn't do
-/bin/ln -snf /proc/self/fd /dev/fd
-/bin/ln -snf /proc/self/fd/0 /dev/stdin
-/bin/ln -snf /proc/self/fd/1 /dev/stdout
-/bin/ln -snf /proc/self/fd/2 /dev/stderr
-/bin/ln -snf /proc/kcore /dev/core
-/bin/mkdir /dev/pts
-/bin/mkdir /dev/shm
-
-# start up our mini logger until syslog takes over
-/sbin/minilogd
-
-# anything more serious than KERN_WARNING goes to the console
-# 'verbose' cmdline parameter enables more messages
-if /bin/grep -q " verbose" /proc/cmdline; then
- /bin/dmesg -n 8
-else
- /bin/dmesg -n 3
-fi
-
-# enable rtc access
-/sbin/modprobe rtc-cmos >/dev/null 2>&1
-RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}"
-if [ -n "$RTC_MAJOR" ]; then
- /bin/mkdir /dev/misc/
- /bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0
- /bin/ln -s /dev/misc/rtc0 /dev/rtc
-fi
-
-HWCLOCK_PARAMS="--hctosys"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
-else
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
-fi
-if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
-fi
-
-# Set clock early to fix some bugs with filesystem checks
-# Clock is set again later to match rc.conf
-if [ -f /etc/localtime ]; then
- /sbin/hwclock $HWCLOCK_PARAMS --noadjfile
-fi
-
-echo > /proc/sys/kernel/hotplug
-
-if [ -x /sbin/udevadm -a -d /sys/block ]; then
- # We have udev and /sys appears to be mounted, use UDev
- #status "Starting UDev Daemon" /etc/start_udev init
-
- stat_busy "Starting UDev Daemon"
- /sbin/udevd --daemon
- stat_done
-else
- # Static /dev, our last resort
- status "Using static /dev filesystem" true
-fi
-
-# Load modules from the MODULES array defined in rc.conf
-if ! [ "$load_modules" = "off" ]; then
- if [ -f /proc/modules ]; then
-############Added by jm to load modules from /proc/cmdline
- f_loadmodules
-##############
- stat_busy "Loading Modules"
- for mod in "${MODULES[@]}"; do
- if [ "$mod" = "${mod#!}" ]; then
- /sbin/modprobe $mod
- fi
- done
- stat_done
- fi
- if [ -d /proc/acpi ]; then
- stat_busy "Loading standard ACPI modules"
- ACPI_MODULES="ac battery button fan processor thermal"
- k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')"
- j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')"
- #add disabled MODULES (!) to blacklist - much requested feature
- for m in ${j}; do
- [ "$m" != "${m#!}" ] && k="${k} ${m#!}"
- done
- # add disablemodules= from commandline to blacklist
- k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')"
- for n in ${ACPI_MODULES}; do
- if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then
- /sbin/modprobe $n > /dev/null 2>&1
- fi
- done
- stat_done
- fi
-fi
-
-# run udev uevents
-if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
- #status "Loading UDev uevents" /etc/start_udev uevents
- stat_busy "Loading UDev uevents"
- udevstart="$(/bin/date +%s%0N)"
- /sbin/udevadm trigger
- /sbin/udevadm settle
- stat_done
- udevend="$(/bin/date +%s%0N)"
- printhl " UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms"
-fi
-
-# bring up the loopback interface
-if [ -d /sys/class/net/lo ]; then
- stat_busy "Bringing up loopback interface"
- /sbin/ifconfig lo 127.0.0.1 up
- if [ $? -ne 0 ]; then
- stat_fail
- else
- stat_done
- fi
-fi
-
-# If necessary, find md devices and manually assemble RAID arrays
-if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then
- # udev won't create these md nodes, so we do it ourselves
- for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do
- path=$(echo $dev | /bin/sed 's|/[^/]*$||')
- node=$(echo $dev | /bin/sed "s|^$path/||")
- minor=$(echo $node | /bin/sed 's|^[^0-9]*||')
- [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor
- done
- status "Activating RAID arrays" /sbin/mdadm --assemble --scan
-fi
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -x /sbin/lvm -a -d /sys/block ]; then
- # Kernel 2.6.x, LVM2 groups
- /sbin/modprobe -q dm-mod 2>/dev/null
- stat_busy "Activating LVM2 groups"
- /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
- /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
- if [ $? -ne 0 ]; then
- stat_fail
- else
- stat_done
- fi
- fi
-fi
-
-# Set up non-root encrypted partition mappings
-if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
- /sbin/modprobe -q dm-mod 2>/dev/null
- stat_busy "Unlocking encrypted volumes:"
- csfailed=0
- CS=/sbin/cryptsetup.static
- do_crypt() {
- if [ $# -ge 3 ]; then
- cname="$1"
- csrc="$2"
- cpass="$3"
- shift 3
- copts="$*"
- stat_append "${cname}.."
- # For some fun reason, the parameter ordering varies for
- # LUKS and non-LUKS devices. Joy.
- if [ "${cpass}" = "SWAP" ]; then
- # This is DANGEROUS! The only possible safety check
- # is to not proceed in case we find a LUKS device
- # This may cause dataloss if it is not used carefully
- if $CS isLuks $csrc 2>/dev/null; then
- false
- else
- $CS -d /dev/urandom $copts create $cname $csrc >/dev/null
- if [ $? -eq 0 ]; then
- stat_append "creating swapspace.."
- /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null
- fi
- fi
- elif [ "${cpass}" = "ASK" ]; then
- printf "\nOpening '${cname}' volume:\n"
-
- if $CS isLuks $csrc 2>/dev/null; then
- $CS $copts luksOpen $csrc $cname < /dev/console
- else
- $CS $copts create $cname $csrc < /dev/console
- fi
- elif [ "${cpass:0:1}" != "/" ]; then
- if $CS isLuks $csrc 2>/dev/null; then
- echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null
- else
- echo "$cpass" | $CS $copts create $cname $csrc >/dev/null
- fi
- else
- if $CS isLuks $csrc 2>/dev/null; then
- $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null
- else
- $CS -d $cpass $copts create $cname $csrc >/dev/null
- fi
- fi
- if [ $? -ne 0 ]; then
- csfailed=1
- stat_append "failed "
- else
- stat_append "ok "
- fi
- fi
- }
- while read line; do
- eval do_crypt "$line"
- done </etc/crypttab
- if [ $csfailed -eq 0 ]; then
- stat_done
- else
- stat_fail
- fi
- # Maybe someone has LVM on an encrypted block device
- if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -x /sbin/lvm -a -d /sys/block ]; then
- /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
- /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
- fi
- fi
-fi
-
-FORCEFSCK=
-[ -f /forcefsck ] && FORCEFSCK="-- -f"
-NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk"
-
-#F Check filesystems
-f_fscheck
-
-#F Activate swaps
-f_swapon
-
-stat_busy "Configuring System Clock"
-if [ ! -f /var/lib/hwclock/adjtime ]; then
- echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
-fi
-if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
- /bin/rm -f /etc/localtime
- /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-fi
-
-/sbin/hwclock $HWCLOCK_PARAMS
-stat_done
-
-if [ -f /var/run/random-seed ]; then
- stat_busy "Initializing Random Seed"
- /bin/cat /var/run/random-seed >/dev/urandom
- stat_done
-fi
-
-stat_busy "Removing Leftover Files"
-/bin/rm -f /etc/nologin &>/dev/null
-/bin/rm -f /etc/shutdownpid &>/dev/null
-/bin/rm -f /var/lock/* &>/dev/null
-/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
-/bin/rm -f /forcefsck &>/dev/null
-(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; )
-: > /var/run/utmp
-# Keep {x,k,g}dm happy with xorg
-/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix
-/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix
-stat_done
-
-#status "Updating Shared Library Links" /sbin/ldconfig
-
-if [ "$HOSTNAME" != "" ]; then
- status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME
-fi
-
-# Set the NIS domain name, if necessary
-[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname
-if [ "$NISDOMAINNAME" != "" ]; then
- status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME
-fi
-
-status "Updating Module Dependencies" /sbin/depmod -A
-
-# Flush old locale settings
-: >/etc/profile.d/locale.sh
-/bin/chmod 755 /etc/profile.d/locale.sh
-# Set user defined locale
-[ -z "$LOCALE" ] && LOCALE="en_US"
-stat_busy "Setting Locale: $LOCALE"
-echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
-stat_done
-
-if echo "$LOCALE" | /bin/grep -qi utf ; then
- stat_busy "Setting Consoles to UTF-8 mode"
- # UTF-8 consoles are default since 2.6.24 kernel
- # this code is needed not only for older kernels,
- # but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
- /usr/bin/kbd_mode -u
- for i in $(/usr/bin/seq 0 63); do
- printf "\e%%G" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh
- stat_done
- [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP
-else
- stat_busy "Setting Consoles to legacy mode"
- # make non-UTF-8 consoles work on 2.6.24 and newer kernels
- /usr/bin/kbd_mode -a
- for i in $(/usr/bin/seq 0 63); do
- printf "\e%%@" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh
- stat_done
- [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
-fi
-
-if [ -n "$CONSOLEFONT" ]; then
- stat_busy "Loading Console Font: $CONSOLEFONT"
- #CONSOLEMAP in UTF-8 shouldn't be used
- if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then
- CONSOLEMAP=""
- fi
- for i in $(/usr/bin/seq 0 63); do
- if [ -n "$CONSOLEMAP" ]; then
- /usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
- else
- /usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
- fi
- done
- if [ $? -ne 0 ]; then
- stat_fail
- else
- for i in $(/usr/bin/seq 0 63); do
- printf "\e(K" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh
- stat_done
- fi
-fi
-
-# Adding persistent network/cdrom generated rules
-if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then
- stat_busy "Adding persistent cdrom udev rules"
- /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules
- stat_done
-fi
-if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then
- stat_busy "Adding persistent network udev rules"
- /bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules
- stat_done
-fi
-
-# Save our dmesg output from this boot
-if [ -f /var/log/dmesg.log ]; then
- /bin/rm /var/log/dmesg.log
-fi
-/bin/dmesg > /var/log/dmesg.log
-
-# vim: set ts=2 noet:
-# End