diff options
Diffstat (limited to 'abs/core-testing/live-installer/templates/remotes/leadtek')
5 files changed, 334 insertions, 0 deletions
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 new file mode 100644 index 0000000..3adfd4b --- /dev/null +++ b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 @@ -0,0 +1,75 @@ +# +# this config file was written on Mon Dec 13 23:51:16 MET 2004 +# by Thomas Reitmayr (treitmayr@yahoo.com) +# +# brand: Leadtek +# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a +# limitation of the remote control. +# + + +begin remote + + name PVR2000 + bits 8 + flags SHIFT_ENC + gap 120000 + + begin codes + POWER 0x0000000000000070 + TV 0x0000000000000026 + FM 0x0000000000000027 + DVD 0x0000000000000028 + RED 0x000000000000003B + GREEN 0x000000000000003C + YELLOW 0x000000000000003D + BLUE 0x000000000000003E + TELETEXT 0x000000000000006F + SLEEP 0x0000000000000030 + MUTE 0x0000000000000064 + BOSS_KEY 0x0000000000000039 + CH_UP 0x000000000000007C + CH_DOWN 0x0000000000000060 + VOL_DOWN 0x0000000000000078 + VOL_UP 0x0000000000000074 + ENTER 0x0000000000000063 + CC 0x0000000000000020 + FULLSCREEN 0x0000000000000073 + MENU 0x000000000000003F + SCAN 0x0000000000000021 + REPLAY 0x0000000000000032 + PLAY 0x0000000000000033 + SKIP 0x0000000000000034 + OSD 0x0000000000000022 + BACK 0x0000000000000024 + STOP 0x0000000000000036 + FORWARD 0x0000000000000025 + LANGUAGE 0x0000000000000023 + 1 0x0000000000000075 + 2 0x0000000000000076 + 3 0x0000000000000077 + 4 0x0000000000000079 + 5 0x000000000000007A + 6 0x000000000000007B + 7 0x000000000000007D + 8 0x000000000000007E + 9 0x000000000000007F + 0 0x0000000000000062 + . 0x0000000000000031 + RECALL 0x0000000000000061 + VIDEO 0x000000000000006E + AUDIO 0x000000000000006B + DISPLAY 0x0000000000000066 + SNAPSHOT 0x0000000000000038 + PIP 0x000000000000003A + RECSTOP 0x0000000000000036 + REC 0x0000000000000037 + TIMESHIFT 0x0000000000000035 + + end codes + +end remote + + diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 new file mode 100644 index 0000000..47e5b8e --- /dev/null +++ b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 @@ -0,0 +1,86 @@ +# Made by Leandro Lucarella <luca@lugmen.org.ar> +# +# brand: Leadtek +# model: RM-0007 (bundeled with WinView 601TV card) +# +# Based on Winfast TV200: +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# modifications based on the config files from +# Juan Toledo <toledo@users.sourceforge.net> and +# Markus Lischka <mlischka@users.sourceforge.net> +# +# With some modification based on a patch for WinView 601 made by +# Juan FC. <juan@kili.com.ar> +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + +begin remote + + name RM-0007 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 629 1617 + zero 629 495 + ptrail 632 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes +# 1st row of buttons + POWER 0x00000000000000FF + MENU 0x000000000000807F + FM 0x00000000000040BF + PC/TV 0x000000000000C03F +# volume/channel + VOL_UP 0x00000000000020DF + VOL_DOWN 0x00000000000010EF + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 +# numbers pad + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + RETURN 0x0000000000008877 + 0 0x00000000000048B7 + DISPLAY 0x000000000000C837 +# unknown icon buttons + HELP 0x00000000000038C7 + SCAN 0x000000000000A857 + OSD 0x0000000000006897 + OPTIONS 0x000000000000E817 +# labeled buttons + MUTE 0x00000000000028D7 + MTS 0x000000000000D827 + VIDEO 0x0000000000007887 + CC 0x000000000000F807 +# color dots buttons + RED 0x00000000000018E7 + GREEN 0x0000000000009867 + YELLOW 0x00000000000058A7 + BLUE 0x000000000000B847 + end codes + +end remote diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 new file mode 100644 index 0000000..e0efcba --- /dev/null +++ b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 @@ -0,0 +1,101 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002 +# +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# brand: Leadtek +# model: RM-0010 (bundeled with TV2000 TV-card) +# +# modifications based on the config files from +# Juan Toledo <toledo@users.sourceforge.net> and +# Markus Lischka <mlischka@users.sourceforge.net> +# Reza Naima +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + + +begin remote + + name RM-0010 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x00000000000040BF + SCAN 0x000000000000A857 + DISPLAY 0x0000000000006897 + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + 0 0x00000000000048B7 + RECALL 0x0000000000008877 + ENTER 0x000000000000C837 + CC 0x000000000000F807 + MTS 0x000000000000D827 + FINE_DOWN 0x0000000000009867 + FINE_UP 0x00000000000018E7 + VIDEO 0x0000000000007887 + MUTE 0x00000000000028D7 + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 + VOL_DOWN 0x00000000000010EF + VOL_UP 0x00000000000020DF + FULLSCREEN 0x000000000000C03F + +# The following are only supported by the remote control bundled with +# the WinFast TV 2000 XP Deluxe card. + + SLEEP 0x00000000000002FD + BOSS_KEY 0x000000000000926D + RED 0x000000000000D22D + GREEN 0x00000000000032CD + YELLOW 0x000000000000B24D + BLUE 0x000000000000728D + PIP 0x00000000000052AD + . 0x000000000000827D + BACK 0x00000000000042BD + PLAY 0x000000000000C23D + NEXT 0x00000000000022DD + TIMESHIFT 0x000000000000A25D + STOP 0x000000000000629D + REC 0x000000000000E21D + SNAPSHOT 0x00000000000012ED + +# Only found on CoolCommand remote + + REPEAT 0x000000000000884B + TELETEXT 0x000000000000F807 + end codes + +end remote + + diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 new file mode 100644 index 0000000..ef1992a --- /dev/null +++ b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 @@ -0,0 +1,36 @@ +# +# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control). +# +# Made by Leandro Lucarella <luca@lugmen.org.ar> based on mainstream lirc +# Leadtek WinFast2000TV (RM-0010 remote control). +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * BLUE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH_UP +MOVE_OUT * CH_DOWN + +BUTTON1_TOGGLE * RETURN +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * DISPLAY + +BUTTON1_CLICK * MENU +BUTTON1_CLICK * 5 +BUTTON2_CLICK * FM +BUTTON3_CLICK * PC/TV + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 new file mode 100644 index 0000000..ce0eff4 --- /dev/null +++ b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 @@ -0,0 +1,36 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * SCAN + +MOVE_N * 2 +MOVE_N * CH_UP +MOVE_NE * 3 +MOVE_E * 6 +MOVE_E * VOL_UP +MOVE_SE * 9 +MOVE_S * 8 +MOVE_S * CH_DOWN +MOVE_SW * 7 +MOVE_W * 4 +MOVE_W * VOL_DOWN +MOVE_NW * 1 +MOVE_IN * VIDEO +MOVE_OUT * MUTE + +BUTTON1_TOGGLE * RECALL +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * ENTER + +BUTTON1_CLICK * FULLSCREEN +BUTTON2_CLICK * FINE_DOWN +BUTTON3_CLICK * FINE_UP + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible |