1 files changed, 0 insertions, 148 deletions
diff --git a/abs/core-testing/runit-scripts/runitscripts/services/lircd/run b/abs/core-testing/runit-scripts/runitscripts/services/lircd/run
deleted file mode 100755
index 3ff8af3..0000000
--- a/abs/core-testing/runit-scripts/runitscripts/services/lircd/run
+++ /dev/null
@@ -1,148 +0,0 @@
-#!/bin/bash
-
-exec 2>&1
-export TERM=linux
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-
-LOG=/tmp/lirc.log
-
-if [ -f $LOG ]
-then
-    rm -f $LOG
-fi
-
-#since what we do may not be enough
-#if your one of those people, this is where you place your stuff
-#This means place your lirc stuff in /etc/runit/lirc.sh.  
-#Anything in that file will be used and the rest of this file is ignored
-
-if [ -f /etc/runit/lirc.sh ]
-then
-    #program must not terminate.
-
-    stat_runit "Starting lirc"
-    
-    /etc/runit/lirc.sh
-else
-    . /etc/systemconfig
-    stat_runit "Starting lirc"
-
-    [ -e /etc/sv/lircd/.runtime ] || mkdir -p /etc/sv/lircd/.runtime
-
-    function dvico_detect {
-        if [ x$Remotetype = "xdvico" ] || [ x$Remotetype = "xDvico-Dual-Digital4-rev2" ]
-        then
-            RunDvico=true
-        else
-            RunDvico=false
-        fi
-    }
-
-    num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l `
-    num_lirc=$((num_lirc-1))
-
-    serial_port=""
-
-    if [ x$ReceiverType = xSerial ]
-    then
-        serial_port=$ReceiverSerialport
-    elif [ x$HostBlasterType = xSerial ]
-    then
-        serial_port=$HostSerialPort_blasterlirc
-    fi
-
-    if [ -n "$serial_port" ]
-    then
-        #/dev/ttyS0 (COM1), port 0x3f8, irq 4
-        #/dev/ttyS1 (COM2), port 0x2f8, irq 3
-        #/dev/ttyS2 (COM3), port 0x3e8, irq 4
-        #/dev/ttyS3 (COM4), port 0x2e8, irq 3
-
-        case $serial_port in
-        ttyS0)
-               FLAGS="io=0x3f8  irq=4"
-               ;;
-        ttyS1)
-               FLAGS="io=0x2f8  irq=3"
-               ;;
-        ttyS2)
-               FLAGS="io=0x3e8  irq=4"
-               ;;
-        ttyS3)
-               FLAGS="io=0x2e8  irq=3"
-               ;;
-        esac
-        /usr/bin/setserial /dev/$serial_port uart none
-        sleep 0.5
-        /sbin/modprobe lirc_serial $FLAGS
-        sleep 0.5
-    fi
-
-    dvico_detect
-
-    if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ]
-    then
-        CMD="/usr/sbin/lircd -r -n  --driver=commandir"
-        printhl "   Using commandir"
-        $CMD >>$LOG 2>>$LOG
-        #echo $CMD
-    elif [  x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ]
-    then
-        sv start igdaemon
-        CMD="/usr/sbin/lircd -r -n  --driver=iguanaIR"
-        printhl "       Using iguanaIR usb"
-        #echo $CMD
-        $CMD >>$LOG 2>>$LOG
-
-    elif [ x$ReceiverType = "xSiliconDust_HDHR" ]
-    then
-        # if using the SiliconDust_HDHR as an I/R Receiver
-        printhl "   Using SiliconDust on port 5000"
-        CMD="/usr/sbin/lircd -H udp -d 5000 -n"
-        exec $CMD >>$LOG 2>>$LOG
-    else
-        LASTCMD=""
-
-        for i in `seq 1 $num_lirc`
-        do
-            CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/dev/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
-            printhl "   Device $i"
-            #echo $CMD
-            $CMD >>$LOG 2>>$LOG
-            LASTCMD="--connect=localhost:876$i   $LASTCMD    "
-        done
-
-        if [ $RunDvico = "true" ]
-        then
-            if [ x$Remotetype = "xdvico" ]
-            then
-                LCMD="/usr/sbin/lircd -r -n -d /dev/usb/dvicoIR --driver=dvico  --output /dev/lircd"
-            else
-                LCMD="/usr/sbin/lircd -r -n -d /dev/input/irremote --driver=devinput  --output /dev/lircd"
-            fi
-
-            if [ $num_lirc -lt 0 ]
-            then
-                # Only run Dvico
-                printhl "   Device $Remotetype"
-                #echo $LCMD
-                exec $LCMD >>$LOG 2>>$LOG
-            elif [ $num_lirc -gt -1  ]
-            then
-                i=$((i+1))
-                CMD="$LCMD --output=/dev/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
-                $CMD >> $LOG
-                LASTCMD="--connect=localhost:876$i   $LASTCMD    "
-                printhl "   Device Dvico"
-                /usr/sbin/lircd -r -n -d /dev/lirc0 --output /dev/lircd  $LASTCMD  >>$LOG 2>>$LOG
-            fi
-        else
-            LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /dev/lircd  $LASTCMD"
-            #echo $LCMD
-            exec $LCMD >>$LOG 2>>$LOG
-        fi
-    fi
-fi