diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/LCD/Silverstone/LCDd.conf')
| -rw-r--r-- | abs/core-testing/system-templates/templates/LCD/Silverstone/LCDd.conf | 869 |
1 files changed, 0 insertions, 869 deletions
diff --git a/abs/core-testing/system-templates/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/system-templates/templates/LCD/Silverstone/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core-testing/system-templates/templates/LCD/Silverstone/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF |