diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/remotes/Packard_bell')
3 files changed, 0 insertions, 566 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf deleted file mode 100755 index 9e0e783..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf +++ /dev/null @@ -1,92 +0,0 @@ -# Config file for Packard Bell Remotes (with repeat codes!) -# created by Samuel Wood (sjw@umr.edu) -# -# brand: Packard Bell Remote -# model: El Cheapo Packard Bell Remote -# -# This is a config file for the cheap excess Packard Bell remotes -# you sometimes can buy from online auctions like www.onsale.com. -# -# The receiver that comes with it hooks into the serial port and works -# fine with lirc 0.5.4. -# -# The receiver that comes with the remote is near garbage. If -# you don't point almost directly at it, it will not detect. But -# it's simpler than building your own. :-) -# -# Repeat works fine for me. You just have to modify or add the -# "repeat=" lines in your .lircrc. -# -# irrecord was used to generate the file, then I modified and -# added repeat codes. -# -# The button names used are identical to what was printed on the -# remote, except for the number pads (using actual numbers like -# "1" and so forth did not seem to work. Similarly, '*' is Star -# and '#' is Hash. LMB and RMB refer to the two mousepad buttons -# on the left and right respectively. -# -# I still need to modify the gap setting. Right now, if you don't -# hold the button down long enough, it may not register, but if -# you hold it too long, it will detect a repeat or two. Feel free -# to modify this to work better. If you get it to work better, send -# me a copy. :-) - -begin remote - - name PackBell - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 400 - - header 9065 4500 - one 597 532 - zero 597 1643 - ptrail 597 - pre_data_bits 16 - pre_data 0xF708 - post_data_bits 1 - post_data 0x0 - gap 107000 - repeat_bit 0 - repeat 9050 2250 - - begin codes - Help 0x0000000000006F90 - Phone 0x0000000000004FB0 - Message 0x0000000000006E91 - SRS 0x0000000000004EB1 - CD 0x0000000000002FD0 - Aux1 0x0000000000000FF0 - Aux2 0x0000000000002ED1 - Aux3 0x0000000000000EF1 - LMB 0x00000000000023DC - RMB 0x000000000000639C - Up 0x00000000000037C8 - Down 0x00000000000057A8 - Left 0x0000000000007788 - Right 0x00000000000017E8 - Menu 0x0000000000007B84 - Mute 0x0000000000003BC4 - Enter 0x00000000000047B8 - CHUp 0x00000000000027D8 - CHDown 0x0000000000006798 - VolUp 0x0000000000005BA4 - VolDown 0x0000000000001BE4 - Display 0x00000000000007F8 - One 0x0000000000005EA1 - Two 0x0000000000001EE1 - Three 0x0000000000000BF4 - Four 0x0000000000007E81 - Five 0x0000000000003EC1 - Six 0x0000000000004BB4 - Seven 0x0000000000005FA0 - Eight 0x0000000000001FE0 - Nine 0x0000000000002BD4 - Zero 0x0000000000003FC0 - Star 0x0000000000007F80 - Hash 0x0000000000006B94 - end codes - -end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt deleted file mode 100755 index 5e54f7a..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = CHUp -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CHDown -config = Down -end - -# General Left -begin -prog = mythtv -button = Left -config = Left -end - -# General Right -begin -prog = mythtv -button = Right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VolUp -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VolDown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = Enter -config = Space -end - -# Play -begin -prog = mythtv -button = -config = Return -end - -# Stop -begin -prog = mythtv -button = -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = Zero -config = 0 -end - -begin -prog = mythtv -button = One -config = 1 -end - -begin -prog = mythtv -button = Two -config = 2 -end - -begin -prog = mythtv -button = Three -config = 3 -end - -begin -prog = mythtv -button = Four -config = 4 -end - -begin -prog = mythtv -button = Five -config = 5 -end - -begin -prog = mythtv -button = Six -config = 6 -end - -begin -prog = mythtv -button = Seven -config = 7 -end - -begin -prog = mythtv -button = Eight -config = 8 -end - -begin -prog = mythtv -button = Nine -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Menu -config = osd -end - -# Pause playback -begin -prog = mplayer -button = -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Left -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = Right -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = -config = Play -end - -begin -prog = xine -button = -config = Stop -end - -begin -prog = xine -button = -config = Quit -end - -begin -prog = xine -button = -config = Pause -end - -begin -prog = xine -button = Up -config = EventUp -end - -begin -prog = xine -button = Down -config = EventDown -end - -begin -prog = xine -button = Left -config = EventLeft -end - -begin -prog = xine -button = Right -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = Menu -config = Menu -end - -begin -prog = xine -button = -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VolUp -config = Volume+ -end - -begin -prog = xine -button = VolDown -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = Help -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg Binary files differdeleted file mode 100644 index 76453bb..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg +++ /dev/null |