diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates')
11 files changed, 1530 insertions, 1225 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircd-haupgrey-g3.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircd-haupgrey-g3.conf deleted file mode 100755 index c245c7a..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircd-haupgrey-g3.conf +++ /dev/null @@ -1,80 +0,0 @@ - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote - diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircrc-haupgrey-g3.txt b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircrc-haupgrey-g3.txt deleted file mode 100755 index f12e4eb..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/lircrc-haupgrey-g3.txt +++ /dev/null @@ -1,586 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the new grey Hauppauge remote -# -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive - -begin -prog = mythtv -button = TV -repeat = 3 -config = F5 -end - -begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 -end - -# Not yet defined -begin -prog = mythtv -button = Music -repeat = 3 -config = Up -end - -# Given another function for now, I don't use mythgallery -begin -prog = mythtv -button = Pictures -repeat = 3 -config = F -end - -begin -prog = mythtv -button = Guide -repeat = 3 -config = O -end - -# Radio brings up menu - -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 -end - -begin -prog = mythtv -button = Up -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = Down -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = Left -repeat = 3 -config = Left -end - -begin -prog = mythtv -button = Right -repeat = 3 -config = Right -end - -# Channel Up -begin -prog = mythtv -button = Ch+ -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Ch- -repeat = 3 -config = Down -end - -# OKSelect -begin -prog = mythtv -button = OK -repeat = 3 -config = Space -end - -# Play -begin -prog = mythtv -button = Play -repeat = 3 -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -repeat = 3 -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = Back/Exit -repeat = 3 -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -repeat = 3 -config = | -end - -# Fast forward -begin -prog = mythtv -button = Rewind -repeat = 3 -config = < -end - -# Rewind -begin -prog = mythtv -button = Forward -repeat = 3 -config = > -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = SkipForward -repeat = 3 -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Replay/SkipBackward -repeat = 3 -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -repeat = 3 -config = R -end - -# Delete -begin -prog = mythtv -button = Red -repeat = 3 -config = D -end - -# Decrease play speed -begin -prog = mythtv -button = Green -repeat = 3 -config = U -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu/i -repeat = 3 -config = M -end - -# Scroll up -begin -prog = mythtv -button = Vol+ -repeat = 3 -config = F11 -end - -# Scroll down -begin -prog = mythtv -button = Vol- -repeat = 3 -config = F10 -end - -# Bring up OSD info -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Prev.Ch -repeat = 3 -config = H -end - -# double speed watch -begin -prog = mythtv -button = Yellow -repeat = 3 -config = J -end - -# change tuners -begin -prog = mythtv -button = Asterix -repeat = 3 -config = Y -end - -# Bring up Time stretch -begin -prog = mythtv -button = Blue -repeat = 3 -config = A -end - -# Numbers 0-9 -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - -# MPlayer lirc setup -# Show OSD -begin -prog = mplayer -button = Menu/i -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = Play -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Stop -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = Mute -repeat = 3 -config = mute -end - -begin -prog = mplayer -button = Left -repeat = 3 -config = seek -10 -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Rewind -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = Right -repeat = 3 -config = seek +30 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = Forward -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Back/Exit -repeat = 3 -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SkipForward -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Replay/SkipBackward -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -repeat = 3 -config = vo_fullscreen -end - -# Xine lirc setup -begin -prog = xine -button = Play -repeat = 3 -config = Play -end - -begin -prog = xine -button = Stop -repeat = 3 -config = Stop -end - -begin -prog = xine -button = Back/Exit -repeat = 3 -config = Quit -end - -begin -prog = xine -button = Pause -repeat = 3 -config = Pause -end - -begin -prog = xine -button = Up -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = Down -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = Left -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = Right -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = Forward -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = Rewind -repeat = 3 -config = SpeedSlower -end - -begin -prog = xine -button = Vol+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = Vol- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = Mute -repeat = 3 -config = Mute -end - -begin -prog = xine -button = Menu/i -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SkipForward -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = Replay/SkipBackward -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = Go -repeat = 3 -config = OSDStreamInfos -end - - diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/preview.jpg b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/preview.jpg Binary files differdeleted file mode 100644 index a40a1e8..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-g3/preview.jpg +++ /dev/null diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf new file mode 100644 index 0000000..c0849ef --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf @@ -0,0 +1,199 @@ +# +# this config file was automatically generated +# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 +# +# contributed by Jens Leuschner <leuschner@gmx.net> +# +# brand: Hauppauge +# model: +# supported devices: WinTV primo; WinTV pci; WinTV radio +# +# This config file will work with both homebrew receivers and +# original Hauppauge TV cards !!! +# + +begin remote + + name Hauppauge + bits 13 + flags SHIFT_ENC + eps 30 + aeps 100 + + one 950 830 + zero 950 830 + plead 960 + gap 89584 + repeat_bit 2 + + begin codes + TV 0x000000000000100F + RADIO 0x000000000000100C + FULL_SCREEN 0x000000000000102E + CH+ 0x0000000000001020 + CH- 0x0000000000001021 + VOL- 0x0000000000001011 + VOL+ 0x0000000000001010 + MUTE 0x000000000000100D + SOURCE 0x0000000000001022 + 1 0x0000000000001001 + 2 0x0000000000001002 + 3 0x0000000000001003 + 4 0x0000000000001004 + 5 0x0000000000001005 + 6 0x0000000000001006 + 7 0x0000000000001007 + 8 0x0000000000001008 + 9 0x0000000000001009 + 0 0x0000000000001000 + RESERVED 0x000000000000101E + MINIMIZE 0x0000000000001026 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 +# +# contributed by +# +# brand: Hauppauge +# model no. of remote control: +# devices being controlled by this remote: PVR 2/350 +# + +begin remote + + name hauppauge_pvr + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Power 0x00000000000017FD + Go 0x00000000000017FB + 1 0x00000000000017C1 + 2 0x00000000000017C2 + 3 0x00000000000017C3 + 4 0x00000000000017C4 + 5 0x00000000000017C5 + 6 0x00000000000017C6 + 7 0x00000000000017C7 + 8 0x00000000000017C8 + 9 0x00000000000017C9 + Back/Exit 0x00000000000017DF + 0 0x00000000000017C0 + Menu 0x00000000000017CD + Red 0x00000000000017CB + Green 0x00000000000017EE + Yellow 0x00000000000017F8 + Blue 0x00000000000017E9 + Ch+ 0x00000000000017E0 + Ch- 0x00000000000017E1 + Vol- 0x00000000000017D1 + Vol+ 0x00000000000017D0 + Ok 0x00000000000017E5 + Mute 0x00000000000017CF + Blank 0x00000000000017CC + Full 0x00000000000017FC + Rewind 0x00000000000017F2 + Play 0x00000000000017F5 + Forward 0x00000000000017F4 + Record 0x00000000000017F7 + Stop 0x00000000000017F6 + Pause 0x00000000000017F0 + Replay 0x00000000000017E4 + Skip 0x00000000000017DE + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 +# +# contributed by +# +# brand: Hauppauge 350 +# Created: G.J. Werler (The Netherlands) +# Project: Mythtv Fedora Pundit-R www.mythtvportal.com +# Date: 2004/11/28 +# model no. of remote control: Hauppauge A415-HPG +# devices being controlled by this remote: PVR-350 +# + +begin remote + + name Hauppauge_350 + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Go 0x00000000000017BB + Power 0x00000000000017BD + TV 0x000000000000179C + Videos 0x0000000000001798 + Music 0x0000000000001799 + Pictures 0x000000000000179A + Guide 0x000000000000179B + Radio 0x000000000000178C + Up 0x0000000000001794 + Left 0x0000000000001796 + Right 0x0000000000001797 + Down 0x0000000000001795 + OK 0x00000000000017A5 + Back/Exit 0x000000000000179F + Menu/i 0x000000000000178D + Vol+ 0x0000000000001790 + Vol- 0x0000000000001791 + Prev.Ch 0x0000000000001792 + Mute 0x000000000000178F + Ch+ 0x00000000000017A0 + Ch- 0x00000000000017A1 + Record 0x00000000000017B7 + Stop 0x00000000000017B6 + Rewind 0x00000000000017B2 + Play 0x00000000000017B5 + Forward 0x00000000000017B4 + Replay/SkipBackward 0x00000000000017A4 + Pause 0x00000000000017B0 + SkipForward 0x000000000000179E + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Asterix 0x000000000000178A + 0 0x0000000000001780 + # 0x000000000000178E + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + end codes + +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt new file mode 100644 index 0000000..2f1e514 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt @@ -0,0 +1,505 @@ +# lircrc.example.HauppaugeGrey-nativelirc +# 2003-09-17, Robert Kulagowski +# mailto:rkulagow@rocketmail.com +# Save this file in ~/.mythtv/lircrc + +begin + prog = mythtv + button = Power + config = Esc +end + +begin + prog = mythtv + button = Go +# Swap the PiP windows + config = N +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = Back/Exit + config = Esc +end + +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = Menu + config = M +end + +# Below are keys used with the Hauppauge Grey remote + +begin + prog = mythtv +# This is the Red key +# We'll use it for "Delete" + button = Red + config = D +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "Information" + button = Green + config = I +end + +# Note the "repeat = " strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +begin + prog = mythtv +# This is the Yellow key +# Use it as a volume key + button = Yellow + repeat = 3 + config = F10 +end + +begin + prog = mythtv +# This is the Blue key +# Use it as a volume key + button = Blue + repeat = 3 + config = F11 +end + +begin + prog = mythtv + button = Ch+ +# This is the "up" on the central diamond + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = Ch- +# This is the "down" on the central diamond + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = Vol- +# This is the "left" on the central diamond + repeat = 3 + config = Left +end + +begin + prog = mythtv + button = Vol+ +# This is the "right" on the central diamond + repeat = 3 + config = Right +end + +begin + prog = mythtv +# Middle button on the diamond + button = Ok + config = Return +end + +begin + prog = mythtv + button = Mute + config = F9 +end + +begin + prog = mythtv +# Change focus for PiP (to change channel in the other window) + button = Blank + config = B +end + +begin + prog = mythtv +# Toggle PiP on/off + button = Full + config = V +end + +begin + prog = mythtv + button = Rewind + config = Left +end + +begin + prog = mythtv + button = Play + config = P +end + +begin + prog = mythtv + button = Forward + config = Right +end + +begin + prog = mythtv + button = Record + config = R +end + +begin + prog = mythtv +# Teletext + button = Stop + config = T +end + +begin + prog = mythtv + button = Pause + config = P +end + +begin + prog = mythtv + button = Replay +# Use for backwards commercial skip + config = Q +end + +begin + prog = mythtv + button = Skip +# Use for forward commercial skip + config = Z +end + +#MPlayer +begin + prog = mplayer + button = Power + config = quit +end + +begin + prog = mplayer + button = Menu + config = osd +end + +begin + prog = mplayer + button = Rewind + config = seek -10 + repeat = 1 +end + +begin + prog = mplayer + button = Forward + config = seek +10 + repeat = 1 +end + +begin + prog = mplayer + button = Replay + config = seek -60 + repeat = 1 +end + +begin + prog = mplayer + button = Skip + config = seek +60 + repeat = 1 +end + +begin + prog = mplayer + button = Pause + config = pause +end + +begin + prog = mplayer + button = Play + config = pause +end + +begin + prog = mplayer + button = Back/Exit + config = quit +end + +begin + prog = mplayer + button = Vol+ + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = Vol- + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = Mute + config = mute +end +##XINE + + begin + prog = xine + button = Play + repeat = 3 + config = Play + end + + begin + prog = xine + button = Stop + repeat = 3 + config = Stop + end + + begin + prog = xine + button = Back/Exit + config = Quit + end + + begin + prog = xine + button = Pause + repeat = 3 + config = Pause + end + + begin + prog = xine + button = Ch+ + repeat = 4 + config = EventUp + end + + begin + prog = xine + button = Ch- + repeat = 4 + config = EventDown + end + + begin + prog = xine + button = Vol- + repeat = 4 + config = EventLeft + end + + begin + prog = xine + button = Vol+ + repeat = 4 + config = EventRight + end + + begin + prog = xine + button = Ok + repeat = 0 + config = EventSelect + end + + begin + prog = xine + button = Menu + repeat = 0 + config = Menu + end + + #vol down + begin + prog = xine + button = Yellow + repeat = 1 + config = Volume- + end + + #vol up + begin + prog = xine + button = Red + repeat = 1 + config = Volume+ + end + + begin + prog = xine + button = Forward + repeat = 2 + config = SeekRelative+30 + end + + begin + prog = xine + button = Rewind + repeat = 2 + config = SeekRelative-30 + end + + #ch up + begin + prog = xine + button = Green + repeat = 1 + config = SeekRelative+60 + end + + #ch down + begin + prog = xine + button = Blue + repeat = 1 + config = SeekRelative-60 + end + + #sleep + begin + prog = xine + button = Go + repeat = 1 + config = ZoomIn + end + + #display + begin + prog = xine + button = Skip + repeat = 1 + config = ZoomOut + end + + #skip chapter forward + begin + prog = xine + button = Skip + repeat = 1 + config = EventNext + end + + #skip chapter backward + begin + prog = xine + button = Replay + repeat = 1 + config = EventPrior + end + + begin + prog = lircnav + button = Vol- + config = page_down + end + + begin + prog = lircnav + button = Vol+ + config = page_up + end + + begin + prog = lircnav + button = Ch+ + config = up + end + + begin + prog = lircnav + button = Ch- + config = down + end + + begin + prog = lircnav + button = Ok + config = select + end + + begin + prog = lircnav + button = Power + config = quit + end + diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg Binary files differnew file mode 100644 index 0000000..19acba3 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey-g3.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey-g3.conf new file mode 100644 index 0000000..7269fc2 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey-g3.conf @@ -0,0 +1,64 @@ +begin remote + + name Hauppauge_350 + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Go 0x00000000000017BB + Power 0x00000000000017BD + TV 0x000000000000179C + Videos 0x0000000000001798 + Music 0x0000000000001799 + Pictures 0x000000000000179A + Guide 0x000000000000179B + Radio 0x000000000000178C + UP 0x0000000000001794 + LEFT 0x0000000000001796 + RIGHT 0x0000000000001797 + DOWN 0x0000000000001795 + OK 0x00000000000017A5 + Back-Exit 0x000000000000179F + Menu 0x000000000000178D + Volume-UP 0x0000000000001790 + Volume-DOWN 0x0000000000001791 + Prev-Channel 0x0000000000001792 + Mute 0x000000000000178F + Channel-UP 0x00000000000017A0 + Channel-Down 0x00000000000017A1 + Record 0x00000000000017B7 + Stop 0x00000000000017B6 + Rewind 0x00000000000017B2 + Play 0x00000000000017B5 + Forward 0x00000000000017B4 + Previous 0x00000000000017A4 + Pause 0x00000000000017B0 + Next 0x000000000000179E + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + star 0x000000000000178A + 0 0x0000000000001780 + hash 0x000000000000178E + red 0x000000000000178B + green 0x00000000000017AE + yellow 0x00000000000017B8 + blue 0x00000000000017A9 + end codes + +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey.conf deleted file mode 100755 index 69e93b4..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircd-haupgrey.conf +++ /dev/null @@ -1,52 +0,0 @@ -begin remote - name hauppauge - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - one 969 811 - zero 969 811 - gap 114605 - toggle_bit 2 - plead 1097 - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - - end codes - -end remote - diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey-g3.txt b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey-g3.txt new file mode 100644 index 0000000..3868261 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey-g3.txt @@ -0,0 +1,762 @@ +# MythTV LIRC config file for the gray Hauppauge remote +# Sticker on the inside of battery compartment +# A415-HPG +# 1004 032400 +# +# /home/mythtv/.mythtv/lircrc +# +# +### RESET THE MYTH BOX or REBOOT IT +# 1 click is reset front end, 2 clicks is reboot +# +begin + prog = irexec + button = Power + config = /home/mythtv/scripts/mypower.sh & +end +# +### MYTHTV SETTINGS FOR IT'S CONTROL +# +# Program Guide +begin + remote = grayHauppauge + prog = mythtv + button = green + config = F2 +end +# +# TV Recording Playback +begin + remote = grayHauppauge + prog = mythtv + button = Videos + config = F3 +end +# +# Live TV +begin + remote = grayHauppauge + prog = mythtv + button = TV + config = F4 +end +# +# MythWeather +begin + remote = grayHauppauge + prog = mythtv + button = Go + config = F7 +end +# +# MythGame +begin + remote = grayHauppauge + prog = mythtv + button = Green + config = F5 +end +# +# MythMusic +begin + remote = grayHauppauge + prog = mythtv + button = Music + config = F6 +end +# +# Previous Channel +begin + remote = grayHauppauge + prog = mythtv + button = Prev-Channel + config = H +end +# +# Channel Up +begin + remote = grayHauppauge + prog = mythtv + button = Channel-UP + repeat = 3 + config = Up +end + +# Channel Down +begin + prog = mythtv + button = Channel-DOWN + repeat = 3 + config = Down +end + +# OK/Select +begin + prog = mythtv + button = OK + config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = Back-Exit +config = Esc +end + +# Power Off/Exit +# begin +# prog = mythtv +# button = Power +# config = Esc +# end + +# Red means stop! +#begin +#prog = mythtv +#button = red +#config = Esc +#end + +# Pause +begin +prog = mythtv +button = Pause +repeat = 3 +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +repeat = 3 +config = F9 +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = RIGHT +repeat = 3 +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = LEFT +repeat = 3 +config = Left +end + + + + +# Fast forward (while viewing) +begin +prog = mythtv +button = Forward +repeat = 3 +config = > +end + +# Rewind (while viewing) +begin +prog = mythtv +button = Rewind +repeat = 3 +config = < +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Next +repeat = 3 +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Previous +repeat = 3 +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +repeat = 3 +config = R +end + +# Delete +begin +prog = mythtv +button = red +repeat = 3 +config = D +end + +# OSD browse + +begin +prog = mythtv +button = Menu +repeat = 3 +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Guide +repeat = 3 +config = M +end + +# Volume-Up +begin +prog = mythtv +button = Volume-UP +repeat = 3 +config = ] +end + +# Volume-Down +begin +prog = mythtv +button = Volume-DOWN +repeat = 3 +config = [ +end + +# Bring up OSD info +begin +prog = mythtv +button = Go +repeat = 3 +config = I +end + +# Change display aspect ratio +#begin +#prog = mythtv +#button = FULL +#repeat = 3 +#config = W +#end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = yellow +repeat = 3 +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = blue +repeat = 3 +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +repeat = 3 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 3 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 3 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 3 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 3 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 3 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 3 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 3 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 3 +config = 9 +end + +# +### MPlayer lirc setup +# +# Show OSD +begin +prog = mplayer +button = Menu +repeat = 3 +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +repeat = 3 +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = Play +repeat = 3 +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = Stop +repeat = 3 +config = quit +end + +# Mute +begin +prog = mplayer +button = Mute +repeat = 3 +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +repeat = 3 +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = Forward +repeat = 3 +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Back-Exit +repeat = 3 +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Next +repeat = 3 +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Previous +repeat = 3 +config = seek -600 +end + +# Toggle full-screen +#begin +#prog = mplayer +#button = FULL +#repeat = 3 +#config = vo_fullscreen +#end +# +# +### XINE CONFIGURATION +# +## +# xine key bindings. +# Automatically generated by xine-ui version 0.99.2. +## + +# start playback +begin + button = Play + prog = xine + repeat = 3 + config = Play +end + +# playback pause toggle +begin + button = Pause + prog = xine + repeat = 3 + config = Pause +end + +# stop playback +begin + button = Stop + prog = xine + repeat = 3 + config = Stop +end + +# take a snapshot +begin + button = Record + prog = xine + repeat = 3 + config = Snapshot +end + +# eject the current medium +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = Eject +end + +# set position to -60 seconds in current stream +begin + button = Previous + prog = xine + repeat = 3 + config = SeekRelative-60 +end + +# set position to +60 seconds in current stream +begin + button = Next + prog = xine + repeat = 3 + config = SeekRelative+60 +end + +# set position to -30 seconds in current stream +begin + button = Rewind + prog = xine + repeat = 3 + config = SeekRelative-30 +end + +# set position to +30 seconds in current stream +begin + button = Forward + prog = xine + repeat = 3 + config = SeekRelative+30 +end + +# set position to +7 and -7 seconds in current stream +begin + button = 1 + prog = xine + repeat = 3 + config = SeekRelative-7 +end + +begin + button = 2 + prog = xine + repeat = 3 + config = SeekRelative+7 +end + +begin + button = 4 + prog = xine + repeat = 3 + config = SetPosition40% +end + +begin + button = 5 + prog = xine + repeat = 3 + config = SetPosition70% +end + +begin + button = UP + prog = xine + repeat = 3 + config = SpeedFaster +end + +begin + button = DOWN + prog = xine + repeat = 3 + config = SpeedSlower +end + +begin + button = OK + prog = xine + repeat = 3 + config = SpeedReset +end + +# increment audio volume +begin + button = Volume-UP + prog = xine + repeat = 3 + config = Volume+ +end + +# decrement audio volume +begin + button = Volume-DOWN + prog = xine + repeat = 3 + config = Volume- +end + +# audio muting toggle +begin + button = Mute + prog = xine + repeat = 3 + config = Mute +end + +# set video output window to 100% +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = Window100 +end + +# set video output window to 200% +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = Window200 +end + +# zoom in +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = ZoomIn +end + +# zoom out +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = ZoomOut +end + +# fullscreen toggle +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = ToggleFullscreen +end + +# Xinerama fullscreen toggle +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = ToggleXineramaFullscr +end + +# jump to Title Menu +begin + button = Go + prog = xine + repeat = 3 + config = TitleMenu +end + +# jump to Root Menu +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = RootMenu +end + +# menu navigate up +begin + button = xxxx + prog = xine + repeat = 3 + config = EventUp +end + +# menu navigate down +begin + button = xxxx + prog = xine + repeat = 3 + config = EventDown +end + +# menu navigate left +begin + button = LEFT + prog = xine + repeat = 3 + config = EventLeft +end + +# menu navigate right +begin + button = RIGHT + prog = xine + repeat = 3 + config = EventRight +end + +# visibility toggle of stream info window +begin + button = Guide + prog = xine + repeat = 3 + config = StreamInfosShow +end + +# display stream information using OSD +begin + button = Menu + prog = xine + repeat = 3 + config = OSDStreamInfos +end + + + +# increase brightness by 10 +begin + button = Channel-UP + prog = xine + repeat = 3 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = Channel-DOWN + prog = xine + repeat = 3 + config = BrightnessControl- +end + +# quit the program +begin + button = Back-Exit + prog = xine + repeat = 3 + config = Quit +end + +## +# End of xine key bindings. +## diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey.txt b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey.txt deleted file mode 100755 index cf40c4f..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/lircrc-haupgrey.txt +++ /dev/null @@ -1,507 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the grey Hauppauge remote -# -# By Jarod Wilson, 2003/12/21 -# Amalgamated from Jeff Campbell's, -# .lircrc, the mythtv.org docs, and -# a few touches of my own. :) -# - -# Channel Up -begin -prog = mythtv -button = CH+ -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH- -repeat = 3 -config = Down -end - -# Vol Up -begin -prog = mythtv -button = VOL+ -repeat = 3 -config = F11 -end - -# Vol Down -begin -prog = mythtv -button = VOL- -repeat = 3 -config = F10 -end - -# OK/Select -begin -prog = mythtv -button = OK -config = Space -end - -# Play -begin -prog = mythtv -button = PLAY -config = Return -end - -# Stop -begin -prog = mythtv -button = STOP -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = BACK/EXIT -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = OFF -config = /usr/bin/mythpowerbutton.sh -end - -# Delete -begin -prog = mythtv -button = RED -config = D -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = YELLOW -repeat = 3 -config = J -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = BLUE -repeat = 3 -config = Z -end - -# OSD browse -begin -prog = mythtv -button = GREEN -repeat = 3 -config = O -end - -# Pause -begin -prog = mythtv -button = PAUSE -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -repeat = 3 -config = | -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = REWIND -repeat = 3 -config = Left -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = FORWARD -repeat = 3 -config = Right -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = SKIP -repeat = 3 -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = REPLAY -repeat = 3 -config = PgUp -end - -# Record -begin -prog = mythtv -button = RECORD -repeat = 3 -config = R -end - -# History -begin -prog = mythtv -button = BLANK -repeat = 3 -config = H -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = MENU -repeat = 3 -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = GO -repeat = 3 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = FULL -repeat = 3 -config = W -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = STOP -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = REWIND -repeat = 3 -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FORWARD -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = BACK/EXIT -repeat = 3 -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK/EXIT -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FORWARD -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REWIND -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - - diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/preview.jpg b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/preview.jpg Binary files differindex 19acba3..a40a1e8 100644 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/preview.jpg +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-silver/preview.jpg |
