diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates')
3 files changed, 732 insertions, 0 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircd-haupgrey-alt.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircd-haupgrey-alt.conf new file mode 100644 index 0000000..c0849ef --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircd-haupgrey-alt.conf @@ -0,0 +1,199 @@ +# +# this config file was automatically generated +# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 +# +# contributed by Jens Leuschner <leuschner@gmx.net> +# +# brand: Hauppauge +# model: +# supported devices: WinTV primo; WinTV pci; WinTV radio +# +# This config file will work with both homebrew receivers and +# original Hauppauge TV cards !!! +# + +begin remote + + name Hauppauge + bits 13 + flags SHIFT_ENC + eps 30 + aeps 100 + + one 950 830 + zero 950 830 + plead 960 + gap 89584 + repeat_bit 2 + + begin codes + TV 0x000000000000100F + RADIO 0x000000000000100C + FULL_SCREEN 0x000000000000102E + CH+ 0x0000000000001020 + CH- 0x0000000000001021 + VOL- 0x0000000000001011 + VOL+ 0x0000000000001010 + MUTE 0x000000000000100D + SOURCE 0x0000000000001022 + 1 0x0000000000001001 + 2 0x0000000000001002 + 3 0x0000000000001003 + 4 0x0000000000001004 + 5 0x0000000000001005 + 6 0x0000000000001006 + 7 0x0000000000001007 + 8 0x0000000000001008 + 9 0x0000000000001009 + 0 0x0000000000001000 + RESERVED 0x000000000000101E + MINIMIZE 0x0000000000001026 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 +# +# contributed by +# +# brand: Hauppauge +# model no. of remote control: +# devices being controlled by this remote: PVR 2/350 +# + +begin remote + + name hauppauge_pvr + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Power 0x00000000000017FD + Go 0x00000000000017FB + 1 0x00000000000017C1 + 2 0x00000000000017C2 + 3 0x00000000000017C3 + 4 0x00000000000017C4 + 5 0x00000000000017C5 + 6 0x00000000000017C6 + 7 0x00000000000017C7 + 8 0x00000000000017C8 + 9 0x00000000000017C9 + Back/Exit 0x00000000000017DF + 0 0x00000000000017C0 + Menu 0x00000000000017CD + Red 0x00000000000017CB + Green 0x00000000000017EE + Yellow 0x00000000000017F8 + Blue 0x00000000000017E9 + Ch+ 0x00000000000017E0 + Ch- 0x00000000000017E1 + Vol- 0x00000000000017D1 + Vol+ 0x00000000000017D0 + Ok 0x00000000000017E5 + Mute 0x00000000000017CF + Blank 0x00000000000017CC + Full 0x00000000000017FC + Rewind 0x00000000000017F2 + Play 0x00000000000017F5 + Forward 0x00000000000017F4 + Record 0x00000000000017F7 + Stop 0x00000000000017F6 + Pause 0x00000000000017F0 + Replay 0x00000000000017E4 + Skip 0x00000000000017DE + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 +# +# contributed by +# +# brand: Hauppauge 350 +# Created: G.J. Werler (The Netherlands) +# Project: Mythtv Fedora Pundit-R www.mythtvportal.com +# Date: 2004/11/28 +# model no. of remote control: Hauppauge A415-HPG +# devices being controlled by this remote: PVR-350 +# + +begin remote + + name Hauppauge_350 + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Go 0x00000000000017BB + Power 0x00000000000017BD + TV 0x000000000000179C + Videos 0x0000000000001798 + Music 0x0000000000001799 + Pictures 0x000000000000179A + Guide 0x000000000000179B + Radio 0x000000000000178C + Up 0x0000000000001794 + Left 0x0000000000001796 + Right 0x0000000000001797 + Down 0x0000000000001795 + OK 0x00000000000017A5 + Back/Exit 0x000000000000179F + Menu/i 0x000000000000178D + Vol+ 0x0000000000001790 + Vol- 0x0000000000001791 + Prev.Ch 0x0000000000001792 + Mute 0x000000000000178F + Ch+ 0x00000000000017A0 + Ch- 0x00000000000017A1 + Record 0x00000000000017B7 + Stop 0x00000000000017B6 + Rewind 0x00000000000017B2 + Play 0x00000000000017B5 + Forward 0x00000000000017B4 + Replay/SkipBackward 0x00000000000017A4 + Pause 0x00000000000017B0 + SkipForward 0x000000000000179E + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Asterix 0x000000000000178A + 0 0x0000000000001780 + # 0x000000000000178E + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + end codes + +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircrc-haupgrey-alt b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircrc-haupgrey-alt new file mode 100644 index 0000000..f86246a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/lircrc-haupgrey-alt @@ -0,0 +1,533 @@ +# put this in /usr/MythVantage/templates/remotes/hauppauge-grey/ +# then change /etc/lircrc to include it +# +# lircrc.example.HauppaugeGrey-nativelirc +# 2003-09-17, Robert Kulagowski +# mailto:rkulagow@rocketmail.com +# Save this file in ~/.mythtv/lircrc + +begin + prog = mythtv + button = Power + config = Esc +end + +begin + prog = mythtv + button = Go +# Swap the PiP windows + config = N +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = Back/Exit + config = Esc +end + +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = Menu + config = M +end + +# Below are keys used with the Hauppauge Grey remote + +begin + prog = mythtv +# This is the Red key +# We'll use it for "Delete" + button = Red + config = Space +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "Information" + button = Green + config = I +end + +# Note the "repeat = " strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +begin + prog = mythtv +# This is the Yellow key +# Use it as a volume key + button = Yellow + repeat = 3 + config = F10 +end + +begin + prog = mythtv +# This is the Blue key +# Use it as a volume key + button = Blue + repeat = 3 + config = F11 +end + +begin + prog = mythtv + button = Ch+ +# This is the "up" on the central diamond + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = Ch- +# This is the "down" on the central diamond + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = Vol- +# This is the "left" on the central diamond + repeat = 3 + config = Left +end + +begin + prog = mythtv + button = Vol+ +# This is the "right" on the central diamond + repeat = 3 + config = Right +end + +begin + prog = mythtv +# Middle button on the diamond + button = Ok + config = Return +end + +begin + prog = mythtv + button = Mute + config = F9 +end + +begin + prog = mythtv +# Change focus for PiP (to change channel in the other window) + button = Blank + config = B +end + +begin + prog = mythtv +# Toggle PiP on/off + button = Full + config = V +end + +begin + prog = mythtv + button = Rewind + config = Left +end + +begin + prog = mythtv + button = Play + config = P +end + +begin + prog = mythtv + button = Forward + config = Right +end + +begin + prog = mythtv + button = Record + config = R +end + +begin + prog = mythtv +# Teletext + button = Stop + config = T +end + +begin + prog = mythtv + button = Pause + config = P +end + +begin + prog = mythtv + button = Replay +# Use for backwards commercial skip + config = Q +end + +begin + prog = mythtv + button = Skip +# Use for forward commercial skip + config = Z +end + +#MPlayer +begin + prog = mplayer + button = Power + config = quit +end + +begin + prog = mplayer + button = Menu + config = osd +end + +begin + prog = mplayer + button = Rewind + config = seek -10 + repeat = 1 +end + +begin + prog = mplayer + button = Forward + config = seek +10 + repeat = 1 +end + +begin + prog = mplayer + button = Vol- + config = seek -15 + repeat = 1 +end + +begin + prog = mplayer + button = Vol+ + config = seek +15 + repeat = 1 +end + +begin + prog = mplayer + button = Replay + config = seek -60 + repeat = 1 +end + +begin + prog = mplayer + button = Skip + config = seek +60 + repeat = 1 +end + +begin + prog = mplayer + button = Pause + config = pause +end + +begin + prog = mplayer + button = OK + config = pause +end + +begin + prog = mplayer + button = Play + config = pause +end + +begin + prog = mplayer + button = Back/Exit + config = quit +end + +begin + prog = mplayer + button = Play + config = pause +end + +begin + prog = mplayer + button = Ch+ + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = Ch- + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = Mute + config = mute +end +##XINE + + begin + prog = xine + button = Play + repeat = 3 + config = Play + end + + begin + prog = xine + button = Stop + repeat = 3 + config = Stop + end + + begin + prog = xine + button = Back/Exit + config = Quit + end + + begin + prog = xine + button = Pause + repeat = 3 + config = Pause + end + + begin + prog = xine + button = Ch+ + repeat = 4 + config = EventUp + end + + begin + prog = xine + button = Ch- + repeat = 4 + config = EventDown + end + + begin + prog = xine + button = Vol- + repeat = 4 + config = EventLeft + end + + begin + prog = xine + button = Vol+ + repeat = 4 + config = EventRight + end + + begin + prog = xine + button = Ok + repeat = 0 + config = EventSelect + end + + begin + prog = xine + button = Menu + repeat = 0 + config = Menu + end + + #vol down + begin + prog = xine + button = Yellow + repeat = 1 + config = Volume- + end + + #vol up + begin + prog = xine + button = Red + repeat = 1 + config = Volume+ + end + + begin + prog = xine + button = Forward + repeat = 2 + config = SeekRelative+30 + end + + begin + prog = xine + button = Rewind + repeat = 2 + config = SeekRelative-30 + end + + #ch up + begin + prog = xine + button = Green + repeat = 1 + config = SeekRelative+60 + end + + #ch down + begin + prog = xine + button = Blue + repeat = 1 + config = SeekRelative-60 + end + + #sleep + begin + prog = xine + button = Go + repeat = 1 + config = ZoomIn + end + + #display + begin + prog = xine + button = Skip + repeat = 1 + config = ZoomOut + end + + #skip chapter forward + begin + prog = xine + button = Skip + repeat = 1 + config = EventNext + end + + #skip chapter backward + begin + prog = xine + button = Replay + repeat = 1 + config = EventPrior + end + + begin + prog = lircnav + button = Vol- + config = page_down + end + + begin + prog = lircnav + button = Vol+ + config = page_up + end + + begin + prog = lircnav + button = Ch+ + config = up + end + + begin + prog = lircnav + button = Ch- + config = down + end + + begin + prog = lircnav + button = Ok + config = select + end + + begin + prog = lircnav + button = Power + config = quit + end diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/preview.jpg b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/preview.jpg Binary files differnew file mode 100644 index 0000000..19acba3 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey-alt/preview.jpg |
