summaryrefslogtreecommitdiffstats
path: root/abs/core-testing/udev
diff options
context:
space:
mode:
Diffstat (limited to 'abs/core-testing/udev')
-rw-r--r--abs/core-testing/udev/81-arch.rules94
-rw-r--r--abs/core-testing/udev/PKGBUILD149
-rw-r--r--abs/core-testing/udev/__changelog1
-rw-r--r--abs/core-testing/udev/arch-udev-rules.patch172
-rwxr-xr-xabs/core-testing/udev/cdsymlinks.sh11
-rwxr-xr-xabs/core-testing/udev/load-modules.sh12
-rw-r--r--abs/core-testing/udev/logitech-rules.patch14
-rw-r--r--abs/core-testing/udev/mount-usb51
-rw-r--r--abs/core-testing/udev/readme-udev-arch.txt266
-rw-r--r--abs/core-testing/udev/resolve-modalias.c62
-rwxr-xr-xabs/core-testing/udev/start_udev137
-rw-r--r--abs/core-testing/udev/udev-ntfs-3g.patch217
-rw-r--r--abs/core-testing/udev/udev.install23
-rw-r--r--abs/core-testing/udev/udev.rules456
-rw-r--r--abs/core-testing/udev/usb-storage.rules4
15 files changed, 199 insertions, 1470 deletions
diff --git a/abs/core-testing/udev/81-arch.rules b/abs/core-testing/udev/81-arch.rules
index 933cbc4..40e0a7c 100644
--- a/abs/core-testing/udev/81-arch.rules
+++ b/abs/core-testing/udev/81-arch.rules
@@ -1,8 +1,6 @@
# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
# do not edit this file, it will be overwritten on update
#
-# This ruleset should provide a DevFS-compatible device tree.
-#
# There are a number of modifiers that are allowed to be used in some
# of the different fields. They provide the following subsitutions:
#
@@ -36,10 +34,8 @@ SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
#PNP addon modules
SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP051[01]*", RUN+="/lib/udev/load-modules.sh irtty-sir"
SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
# PARPORT addon modules
SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
@@ -56,16 +52,16 @@ LABEL="drivers_end"
#####################################
###### CD/DVD symlinks - begin
#####################################
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", IMPORT="cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="scd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", IMPORT="cdrom_id --export $tempnode"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="scd[a-z]", IMPORT="cdrom_id --export $tempnode"
ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
-ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvdrw-%b"
+ACTION=="add|change", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="cdsymlinks.sh"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
+ACTION=="add|change", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="cdsymlinks.sh"
ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="cdsymlinks.sh"
ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="cdsymlinks.sh"
ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="cdsymlinks.sh"
@@ -80,6 +76,9 @@ ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="cdsymlinks.sh"
# fix /dev/root symlink
SUBSYSTEM=="block", RUN+="root-link.sh"
+# permission for sg devices
+KERNEL=="sg[0-9]*", ATTRS{type}!="3|6", GROUP="disk", MODE="0660"
+
# permissions for IDE CD devices
SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
@@ -88,7 +87,7 @@ SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROU
SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
# permissions for removable devices like cardreaders or sticks
-KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
+KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="0", GROUP="storage"
# permissions for firewire external drives
KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
@@ -107,69 +106,38 @@ LABEL="pcmcia_end"
# permissions for SCSI scanners
SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
-# md block devices
-KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
+# mem
+KERNEL=="ram0", SYMLINK+="ramdisk"
+KERNEL=="ram1", SYMLINK+="ram"
+
+# video4linux
+
+KERNEL=="vbi0", SYMLINK+="vbi"
+KERNEL=="radio0", SYMLINK+="radio"
+KERNEL=="radio[0-9]*", GROUP="video"
+KERNEL=="video0", SYMLINK+="video"
+KERNEL=="vtx0", SYMLINK+="vtx"
# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
### xorg resets those permissions, adjust your xorg.conf!
-KERNEL=="nvidia*", GROUP="video"
KERNEL=="3dfx*", GROUP="video"
-
-# i2c devices
-KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
-
-# loop devices
-KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
+KERNEL=="fb[0-9]*", GROUP="video"
# misc
-KERNEL=="nvram", NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
-KERNEL=="psaux", NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="uinput", NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="inotify", NAME="misc/%k", SYMLINK+="%k", MODE="0666"
-
-# sound devices
-# alsa devices
-SUBSYSTEM=="sound", GROUP="audio"
-# oss devices
-KERNEL=="audio*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dmmidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="admmidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dsp*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="adsp*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="midi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="amidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="mixer*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
+KERNEL=="sgi_fetchop", MODE="0666"
+KERNEL=="sonypi", MODE="0666"
# USB devices
-KERNEL=="hiddev*", NAME="usb/%k"
-KERNEL=="legousbtower*", NAME="usb/%k", MODE="0666"
-KERNEL=="dabusb*", NAME="usb/%k"
-
-# netlink devices
-KERNEL=="route", NAME="netlink/%k"
-KERNEL=="skip", NAME="netlink/%k"
-KERNEL=="usersock", NAME="netlink/%k"
-KERNEL=="fwmonitor", NAME="netlink/%k"
-KERNEL=="tcpdiag", NAME="netlink/%k"
-KERNEL=="nflog", NAME="netlink/%k"
-KERNEL=="xfrm", NAME="netlink/%k"
-KERNEL=="arpd", NAME="netlink/%k"
-KERNEL=="route6", NAME="netlink/%k"
-KERNEL=="ip6_fw", NAME="netlink/%k"
-KERNEL=="dnrtmsg", NAME="netlink/%k"
-### ! disabled seems to break device creation !
-# KERNEL=="tap*", NAME="netlink/%k"
+KERNEL=="legousbtower*", MODE="0666"
# IEEE1394 (firewire) devices
-KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="raw1394", GROUP="video"
# kbd devices
-KERNEL=="kbd", MODE="0664"
+KERNEL=="kbd", MODE="0664"
+# miscellaneous
+KERNEL=="rtc|rtc0", GROUP="audio", MODE="0664"
#######################################
# Permissions and Symlinks - end
#######################################
diff --git a/abs/core-testing/udev/PKGBUILD b/abs/core-testing/udev/PKGBUILD
index c22b10b..2f71d28 100644
--- a/abs/core-testing/udev/PKGBUILD
+++ b/abs/core-testing/udev/PKGBUILD
@@ -1,96 +1,127 @@
-# $Id: PKGBUILD 22190 2008-12-22 18:25:11Z tpowa $
+# $Id: PKGBUILD 85315 2010-07-12 05:13:37Z tpowa $
# Maintainer: Aaron Griffin <aaron@archlinux.org>
# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
# Maintainer: Thomas Bächler <thomas@archlinux.org>
-pkgname=udev
-pkgver=135
-pkgrel=7
-pkgdesc="The userspace dev tools (udev)"
+
+pkgbase="udev"
+pkgname=('udev' 'udev-compat')
+pkgver=160
+pkgrel=1
arch=(i686 x86_64)
url="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
license=('GPL')
groups=('base')
-depends=('glibc' 'coreutils' 'util-linux')
-makedepends=('kernel26') #needed to build framebuffer blacklist
-install=udev.install
-backup=(etc/udev/udev.conf
- etc/scsi_id.config
- etc/udev/cdsymlinks.conf
- etc/modprobe.d/framebuffer_blacklist)
-conflicts=('pcmcia-cs' 'hotplug')
-replaces=('devfsd')
# older initscripts versions required start_udev
-conflicts=('initscripts<2008.02')
-options=(!makeflags)
+options=(!makeflags !libtool)
+makedepends=('glibc' 'coreutils' 'util-linux' 'libusb' 'glib2' 'kernel26' 'gperf' 'libxslt' 'gobject-introspection')
source=(http://www.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.bz2
- 81-arch.rules load-modules.sh resolve-modalias.c cdsymlinks.sh root-link.sh
- arch-udev-rules.patch readme-udev-arch.txt usb-storage.rules udev-ntfs-3g.patch mount-usb)
-md5sums=('661b9df34e1304dad10f595d95b472bb'
- '3a955ca8e2122a48a223f9d8adf87b70'
- 'f4951f61438d69894b728212dac7318b'
- 'fca04a608009069beb786e26338a783b'
- '8424b78e9dd772e75b4ef90814807815'
+ 81-arch.rules load-modules.sh cdsymlinks.sh root-link.sh
+ arch-udev-rules.patch
+ logitech-rules.patch)
+md5sums=('65459a1f090082c0471bf4e5112208d7'
+ '6393ee81993f8b9beb776ca904005864'
+ 'f91fddc67609b45b244a624977c4247b'
+ '2e808ee78d237c478b57af2a68d43769'
'2d6dc6842464f107bccc68cd505a6c31'
- 'ae216c26a6a5cae4a3ef9c0e1f7bfaa6'
- '7fc6d33bb218e752302eef0a80ff0a89'
- '11eaec41b77746f50975d4ef834c8f83')
+ '70198227b7bbe3852e1cd2299693af66'
+ '817537bdcfc1a4fa79e853fd38df4528')
build() {
cd $srcdir/$pkgname-$pkgver
- patch -p1 < ../udev-ntfs-3g.patch || return 1
- ./configure --prefix="" --mandir=/usr/share/man --includedir=/usr/include
- make || return 1
- make DESTDIR=$startdir/pkg install
-
+ # fix logitech rules
+ patch -Np0 -i $srcdir/logitech-rules.patch
+ ./configure --prefix="" --mandir=/usr/share/man\
+ --includedir=/usr/include\
+ --libexecdir=/lib/udev\
+ --datarootdir=/usr/share
+ make
+}
+
+package_udev() {
+ pkgdesc="The userspace dev tools (udev)"
+ depends=('glibc' 'coreutils' 'util-linux' 'libusb' 'glib2'
+ 'module-init-tools>=3.11')
+ install=udev.install
+ backup=(etc/udev/udev.conf
+ etc/modprobe.d/framebuffer_blacklist.conf)
+ conflicts=('pcmcia-cs' 'hotplug' 'initscripts<2009.07')
+ replaces=('devfsd')
+
+ cd $srcdir/$pkgname-$pkgver
+ make DESTDIR=${pkgdir} install
# Fix pkgconfig path
install -d -m755 $pkgdir/usr/lib
mv $pkgdir/lib/pkgconfig $pkgdir/usr/lib
-
- # Non-stock rules still go in /etc
- install -D -m644 $srcdir/81-arch.rules $pkgdir/etc/udev/rules.d/81-arch.rules
- install -D -m644 $srcdir/usb-storage.rules $pkgdir/etc/udev/rules.d/usb-storage.rules
-
- # Scripts needed
- mkdir $pkgdir/etc/udev/scripts
- install -D -m744 $srcdir/mount-usb $pkgdir/etc/udev/scripts
-
+ # Fix ConsoleKit path
+ mv $pkgdir/lib/ConsoleKit $pkgdir/usr/lib
+ # Install our rule for permissions and symlinks
+ install -D -m644 $srcdir/81-arch.rules $pkgdir/lib/udev/rules.d/81-arch.rules
# install our module loading subsystem
install -D -m755 $srcdir/load-modules.sh $pkgdir/lib/udev/load-modules.sh
- install -d -m755 $pkgdir/bin
- gcc -Wall $CFLAGS -o $pkgdir/bin/resolve-modalias $srcdir/resolve-modalias.c
# install cdsymlinks.sh
install -D -m755 $srcdir/cdsymlinks.sh $pkgdir/lib/udev/cdsymlinks.sh
# install root-link.sh
install -D -m755 $srcdir/root-link.sh $pkgdir/lib/udev/root-link.sh
-
- # install instructions
- # NOTE: We should delete this file
- install -D -m644 $srcdir/readme-udev-arch.txt $pkgdir/usr/share/udev/readme-udev-arch.txt
-
- # add devices dir
- mkdir $pkgdir/lib/udev/devices
# disable error logging to prevent startup failures printed to vc on boot
sed -i -e 's|udev_log="err"|udev_log="0"|g' $pkgdir/etc/udev/udev.conf
- # install additional rules files
- for rule in $srcdir/$pkgname-$pkgver/rules/packages/*.rules; do
- install -D -m 644 $rule $pkgdir/lib/udev/rules.d/
- done
# fix standard udev rules to fit to arch
cd $pkgdir/lib/udev/rules.d/
- patch -Np1 -i $srcdir/arch-udev-rules.patch || return 1
-
- # remove the md-raid rules which are now provided by the mdadm package
- rm -f $pkgdir/lib/udev/rules.d/64-md-raid.rules
-
+ patch -Np1 -i $srcdir/arch-udev-rules.patch
+ # remove .orig files
+ rm -f $pkgdir/lib/udev/rules.d/*.orig
# disable persistent cdromsymlinks and network by default
# and move it to /etc/udev/rules.d
mv $pkgdir/lib/udev/rules.d/75-persistent-net-generator.rules \
$pkgdir/etc/udev/rules.d/75-persistent-net-generator.rules.optional
mv $pkgdir/lib/udev/rules.d/75-cd-aliases-generator.rules \
$pkgdir/etc/udev/rules.d/75-cd-aliases-generator.rules.optional
+
# create framebuffer blacklist
mkdir -p $pkgdir/etc/modprobe.d/
for mod in $(find /lib/modules/*/kernel/drivers/video -name '*fb.ko' -exec basename {} .ko \;); do
- echo "blacklist $mod" >> $pkgdir/etc/modprobe.d/framebuffer_blacklist
+ echo "blacklist $mod" >> $pkgdir/etc/modprobe.d/framebuffer_blacklist.conf
done
+
+ # create static devices in /lib/udev/devices/
+ mkdir ${pkgdir}/lib/udev/devices/pts
+ mkdir ${pkgdir}/lib/udev/devices/shm
+
+ mknod -m 0600 ${pkgdir}/lib/udev/devices/console c 5 1
+ mknod -m 0666 ${pkgdir}/lib/udev/devices/null c 1 3
+ mknod -m 0660 ${pkgdir}/lib/udev/devices/zero c 1 5
+ mknod -m 0666 ${pkgdir}/lib/udev/devices/kmsg c 1 11
+
+ ln -snf /proc/self/fd ${pkgdir}/lib/udev/devices/fd
+ ln -snf /proc/self/fd/0 ${pkgdir}/lib/udev/devices/stdin
+ ln -snf /proc/self/fd/1 ${pkgdir}/lib/udev/devices/stdout
+ ln -snf /proc/self/fd/2 ${pkgdir}/lib/udev/devices/stderr
+ ln -snf /proc/kcore ${pkgdir}/lib/udev/devices/core
+
+ # these static devices are created for convenience, to autoload the modules if necessary
+ # /dev/loop0
+ mknod -m 0660 ${pkgdir}/lib/udev/devices/loop0 b 7 0
+ chgrp disk ${pkgdir}/lib/udev/devices/loop0
+ # /dev/net/tun
+ mkdir ${pkgdir}/lib/udev/devices/net
+ mknod -m 0666 ${pkgdir}/lib/udev/devices/net/tun c 10 200
+ # /dev/fuse
+ mknod -m 0666 ${pkgdir}/lib/udev/devices/fuse c 10 229
+ # /dev/ppp
+ mknod -m 0600 ${pkgdir}/lib/udev/devices/ppp c 108 0
+
+ # Replace dialout group in rules with uucp group
+ for i in $pkgdir/lib/udev/rules.d/*.rules; do
+ sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g' $i
+ done
+
+ mv "${pkgdir}/lib/girepository-1.0" "${pkgdir}/usr/lib/"
+}
+
+package_udev-compat() {
+ pkgdesc="The userspace dev tools (udev) - additional rules for older kernels"
+ depends=('udev')
+ groups=('')
+ cd $srcdir/$pkgname-$pkgver
+ install -d -m755 ${pkgdir}/lib/${pkgname}/rules.d
+ install -D -m644 ${srcdir}/${pkgname}-${pkgver}/rules/misc/30-kernel-compat.rules ${pkgdir}/lib/udev/rules.d/30-kernel-compat.rules
}
diff --git a/abs/core-testing/udev/__changelog b/abs/core-testing/udev/__changelog
deleted file mode 100644
index 7e00323..0000000
--- a/abs/core-testing/udev/__changelog
+++ /dev/null
@@ -1 +0,0 @@
-Added usb-storage.rule and script to un/mount USB drives.
diff --git a/abs/core-testing/udev/arch-udev-rules.patch b/abs/core-testing/udev/arch-udev-rules.patch
index b672731..ce00c85 100644
--- a/abs/core-testing/udev/arch-udev-rules.patch
+++ b/abs/core-testing/udev/arch-udev-rules.patch
@@ -1,136 +1,50 @@
-diff -Nur rules.d/60-persistent-storage.rules rules.d.arch/60-persistent-storage.rules
---- rules.d/60-persistent-storage.rules 2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/60-persistent-storage.rules 2008-09-12 16:00:50.000000000 +0200
-@@ -10,7 +10,7 @@
- SUBSYSTEM!="block", GOTO="persistent_storage_end"
-
- # skip rules for inappropriate block devices
--KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|dm-*|md*|btibm*", GOTO="persistent_storage_end"
-+KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*|btibm*", GOTO="persistent_storage_end"
-
- # never access non-cdrom removable ide devices, the drivers are causing event loops on open()
- KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
+diff -Nur rules.d/50-udev-default.rules rules.d.arch/50-udev-default.rules
+--- rules.d/50-udev-default.rules 2009-03-07 22:22:48.200242883 +0100
++++ rules.d.arch/50-udev-default.rules 2009-03-07 22:23:26.134434516 +0100
+@@ -59,15 +59,15 @@
+ KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0640 -G floppy $root/%k"
+
+ # cdrom
+-SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n", GROUP="cdrom"
+-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
+-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
+-KERNEL=="pktcdvd", GROUP="cdrom"
++SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n", GROUP="optical", MODE="0660"
++SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="optical", MODE="0660"
++KERNEL=="pktcdvd[0-9]*", GROUP="optical", MODE="0660"
++KERNEL=="pktcdvd", GROUP="optical", MODE="0660"
+
+ # tape
+-KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="tape"
+-KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="tape"
+-SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
++KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="storage", MODE="0660"
++KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="storage", MODE="0660"
++SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="storage", MODE="0660"
+
+ # block-related
+ KERNEL=="sch[0-9]*", GROUP="disk"
diff -Nur rules.d/80-drivers.rules rules.d.arch/80-drivers.rules
---- rules.d/80-drivers.rules 2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/80-drivers.rules 2008-09-12 16:01:56.000000000 +0200
-@@ -2,14 +2,16 @@
-
- ACTION!="add", GOTO="drivers_end"
-
--DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/sbin/modprobe $env{MODALIAS}"
--SUBSYSTEM=="tifm", RUN+="/sbin/modprobe --all tifm_sd tifm_ms"
--SUBSYSTEM=="memstick", RUN+="/sbin/modprobe --all ms_block mspro_block"
--SUBSYSTEM=="mmc", RUN+="/sbin/modprobe mmc_block"
--SUBSYSTEM=="i2o", RUN+="/sbin/modprobe i2o_block"
--SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/sbin/modprobe ide-scsi"
--SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe sg"
--SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/sbin/modprobe ppdev"
-+DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
-+SUBSYSTEM=="tifm", RUN+="/lib/udev/load-modules.sh tifm_sd"
-+SUBSYSTEM=="tifm", RUN+="/lib/udev/load-modules.sh tifm_ms"
+--- rules.d/80-drivers.rules 2010-06-03 11:55:08.978720002 +0200
++++ rules.d.arch/80-drivers.rules 2010-06-03 11:58:41.207865142 +0200
+@@ -2,12 +2,13 @@
+
+ ACTION=="remove", GOTO="drivers_end"
+
+-DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -bv $env{MODALIAS}"
+-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN+="/sbin/modprobe -bv tifm_sd"
+-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN+="/sbin/modprobe -bv tifm_ms"
+-SUBSYSTEM=="memstick", RUN+="/sbin/modprobe -bv --all ms_block mspro_block"
+-SUBSYSTEM=="i2o", RUN+="/sbin/modprobe -bv i2o_block"
+-SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
+-SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/sbin/modprobe -bv ppdev"
++DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/lib/udev/load-modules.sh $env{MODALIAS}"
++SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN+="/lib/udev/load-modules.sh tifm_sd"
++SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN+="/lib/udev/load-modules.sh tifm_ms"
+SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh ms_block"
+SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh mspro_block"
-+SUBSYSTEM=="mmc", RUN+="/lib/udev/load-modules.sh mmc_block"
-+SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
-+SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/lib/udev/load-modules.sh ide-scsi"
++SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
+SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
+SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/lib/udev/load-modules.sh ppdev"
LABEL="drivers_end"
-
-diff -Nur rules.d/50-udev-default.rules rules.d.arch/50-udev-default.rules
---- rules.d/50-udev-default.rules 2008-09-12 15:59:57.000000000 +0200
-+++ rules.d.arch/50-udev-default.rules 2008-09-12 16:00:50.000000000 +0200
-@@ -4,12 +4,17 @@
- KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660", OPTIONS+="last_rule"
- KERNEL=="ptmx", GROUP="tty", MODE="0666", OPTIONS+="last_rule"
- KERNEL=="tty", GROUP="tty", MODE="0666", OPTIONS+="last_rule"
--KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620", OPTIONS+="last_rule"
--KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty", OPTIONS+="last_rule"
-+KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620", NAME="vc/%n", SYMLINK+="%k" OPTIONS+="last_rule"
-+KERNEL=="vcs", GROUP="tty", NAME="vcc/0", OPTIONS+="last_rule"
-+KERNEL=="vcs[0-9]*", GROUP="tty", NAME="vcc/%n", OPTIONS+="last_rule"
-+KERNEL=="vcsa", GROUP="tty", NAME="vcc/a0", OPTIONS+="last_rule"
-+KERNEL=="vcsa[0-9]*", GROUP="tty", NAME="vcc/a%n", OPTIONS+="last_rule"
- KERNEL=="console", MODE="0600", OPTIONS+="last_rule"
-
- # serial
- KERNEL=="tty[A-Z]*|pppox*|ircomm*|noz*", GROUP="uucp"
-+KERNEL=="ttyS[0-9]*", NAME="tts/%n", SYMLINK+="ttyS%n"
-+KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
- KERNEL=="ppp", MODE="0600", OPTIONS+="ignore_remove"
- KERNEL=="mwave", NAME="modems/mwave", GROUP="uucp"
- KERNEL=="hvc*|hvsi*", GROUP="uucp"
-@@ -21,6 +26,7 @@
- KERNEL=="mem|kmem|port|nvram", GROUP="kmem", MODE="0640"
- KERNEL=="ram0", SYMLINK+="ramdisk"
- KERNEL=="ram1", SYMLINK+="ram"
-+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
-
- # input
- KERNEL=="mouse*|mice|event*", NAME="input/%k", MODE="0640"
-@@ -36,13 +36,18 @@
- KERNEL=="vtx*|vbi*", GROUP="video"
- KERNEL=="winradio*", GROUP="video"
- KERNEL=="vbi0", SYMLINK+="vbi"
--KERNEL=="radio0", SYMLINK+="radio"
-+KERNEL=="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK+="%k"
-+KERNEL=="radio0", SYMLINK+="video"
-+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
- KERNEL=="video0", SYMLINK+="video"
-+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k"
-+KERNEL=="vtx0", SYMLINK+="vtx"
-+KERNEL=="vtx[0-9]*", NAME="v4l/vtx%n", SYMLINK+="%k"
-
- # graphics
--KERNEL=="agpgart", MODE="0600", GROUP="video"
--KERNEL=="card[0-9]*", NAME="dri/%k", MODE="0666"
--KERNEL=="fb0", SYMLINK+="fb"
-+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k", GROUP="video", MODE="0600"
-+KERNEL=="card[0-9]*", NAME="dri/%k", GROUP="video", MODE="0666"
-+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
- KERNEL=="pmu", GROUP="video"
- KERNEL=="nvidia*|nvidiactl*", GROUP="video"
- SUBSYSTEM=="graphics", GROUP="video"
-@@ -62,19 +73,19 @@
- # block, tapes, block-releated
- SUBSYSTEM=="block", GROUP="disk"
- SUBSYSTEM=="block", KERNEL=="sr[0-9]*", SYMLINK+="scd%n"
--KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions"
-+KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", OPTIONS+="all_partitions", GROUP="floppy"
- KERNEL=="fd[0-9]", GROUP="floppy"
--KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0640 -G floppy $root/%k"
-+KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k"
- KERNEL=="sch[0-9]*", GROUP="disk"
--KERNEL=="sg[0-9]*", ATTRS{type}!="3|6", GROUP="disk", MODE="0640"
-+KERNEL=="sg[0-9]*", ATTRS{type}!="3|6", GROUP="disk", MODE="0660"
- KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="disk"
- KERNEL=="pg[0-9]*", GROUP="disk"
- KERNEL=="pt[0-9]*|npt[0-9]*", GROUP="disk"
- KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
- KERNEL=="rawctl", NAME="raw/%k", GROUP="disk"
- SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
--KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%k"
--KERNEL=="pktcdvd", NAME="pktcdvd/control"
-+KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%k", GROUP="optical", MODE="0660"
-+KERNEL=="pktcdvd", NAME="pktcdvd/control", GROUP="optical", MODE="0660"
- KERNEL=="qft0", SYMLINK+="ftape"
- SUBSYSTEM=="bsg", NAME="bsg/%k"
- SUBSYSTEM=="aoe", NAME="etherd/%k", GROUP="disk"
-@@ -83,13 +94,13 @@
- KERNEL=="tun", NAME="net/%k", MODE="0666", OPTIONS+="ignore_remove"
-
- # CPU
--KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
--KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
-+KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid", SYMLINK="%k"
-+KERNEL=="msr[0-9]*", NAME="cpu/%n/msr", SYMLINK="%k"
- KERNEL=="microcode", NAME="cpu/microcode", MODE="0600"
-
- # miscellaneous
- KERNEL=="fuse", MODE="0666"
--KERNEL=="rtc|rtc0", MODE="0644"
-+KERNEL=="rtc|rtc0", NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
- KERNEL=="rtc0", SYMLINK+="rtc"
- KERNEL=="auer[0-9]*", NAME="usb/%k"
- KERNEL=="hw_random", NAME="hwrng", SYMLINK+="%k"
diff --git a/abs/core-testing/udev/cdsymlinks.sh b/abs/core-testing/udev/cdsymlinks.sh
index c4185ac..498abda 100755
--- a/abs/core-testing/udev/cdsymlinks.sh
+++ b/abs/core-testing/udev/cdsymlinks.sh
@@ -1,11 +1,15 @@
#! /bin/sh
# Creates cdsymlinks in /dev
# for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-if [ -d /dev/cd ]; then
+
+# check on cd/dvd drives and if persistant rules file is used
+if [ -d /dev/cd -a ! -e /etc/udev/rules.d/75-persistent-cd.rules ]; then
+ # remove existing device files
rm /dev/cdrom*
rm /dev/cdrw*
rm /dev/dvd*
rm /dev/dvdrw*
+ # start creating symlinks
for i in /dev/cd/cdrom-*; do
if [ -h $i ]; then
[ "$CD_NUMBER" = "" ] && ln -s $i /dev/cdrom
@@ -37,9 +41,4 @@ if [ -d /dev/cd ]; then
! [ "$DVDRW_NUMBER" = "" ] && DVDRW_NUMBER="$((DVDRW_NUMBER+1))" && ln -s $i /dev/dvdrw$DVDRW_NUMBER
fi
done
-else
- rm /dev/cdrom*
- rm /dev/cdrw*
- rm /dev/dvd*
- rm /dev/dvdrw*
fi
diff --git a/abs/core-testing/udev/load-modules.sh b/abs/core-testing/udev/load-modules.sh
index a42d376..1e2af91 100755
--- a/abs/core-testing/udev/load-modules.sh
+++ b/abs/core-testing/udev/load-modules.sh
@@ -9,7 +9,7 @@
BLACKLIST="${MOD_BLACKLIST[@]}"
MODPROBE="/sbin/modprobe"
LOGGER="/usr/bin/logger"
-RESOLVEALIAS="/bin/resolve-modalias"
+RESOLVEALIAS="${MODPROBE} --resolve-alias"
USEBLACKLIST="--use-blacklist"
if [ -f /proc/cmdline ]; then
@@ -42,11 +42,11 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
#sanitize the blacklist
BLACKLIST="$(echo "$BLACKLIST" | sed -e 's|-|_|g')"
# Try to find all modules for the alias
- mods=$($RESOLVEALIAS /lib/modules/$(uname -r)/modules.alias $1)
+ mods=$($RESOLVEALIAS $1)
# If no modules could be found, try if the alias name is a module name
# In that case, omit the --use-blacklist parameter to imitate normal modprobe behaviour
[ -z "${mods}" ] && $MODPROBE -qni $1 && mods="$1" && USEBLACKLIST=""
- [ -z "${mods}" ] && $LOGGER -p info -t "$(basename $0)" "'$1' is not a valid module or alias name"
+ [ -z "${mods}" ] && $LOGGER -p local0.debug -t "$(basename $0)" "'$1' is not a valid module or alias name"
for mod in ${mods}; do
# Find the module and all its dependencies
deps="$($MODPROBE -i --show-depends ${mod})"
@@ -61,9 +61,9 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
for dep in $deps; do
if echo "${BLACKLIST}" | /bin/grep -q -e " ${dep} " -e "^${dep} " -e " ${dep}\$"; then
if [ "${dep}" = "${mod}" ]; then
- $LOGGER -p info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because it is blacklisted"
+ $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because it is blacklisted"
else
- $LOGGER -p info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because its dependency '${dep}' is blacklisted"
+ $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because its dependency '${dep}' is blacklisted"
fi
continue 2
fi
@@ -74,7 +74,7 @@ if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
$MODPROBE $USEBLACKLIST ${mod}
done
else
- $MODPROBE $1
+ $MODPROBE $USEBLACKLIST $1
fi
fi
# vim: set et ts=4:
diff --git a/abs/core-testing/udev/logitech-rules.patch b/abs/core-testing/udev/logitech-rules.patch
new file mode 100644
index 0000000..fd0aea4
--- /dev/null
+++ b/abs/core-testing/udev/logitech-rules.patch
@@ -0,0 +1,14 @@
+--- - 2010-07-04 14:50:15.979139552 +0200
++++ extras/hid2hci/70-hid2hci.rules 2010-07-03 21:03:40.685341704 +0200
+@@ -11,9 +11,9 @@
+ RUN+="hid2hci --method=dell --devpath=%p", ENV{HID2HCI_SWITCH}="1"
+
+ # Logitech devices (hidraw)
+-KERNEL=="hiddev*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345bce]|c71[34bc]", \
++KERNEL=="hiddev*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345e]|c71[34]", \
+ RUN+="hid2hci --method=logitech-hid --devpath=%p"
+-KERNEL=="hidraw*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70a", \
++KERNEL=="hidraw*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[abc]|c71[bc]", \
+ RUN+="hid2hci --method=logitech-hid --devpath=%p"
+
+ ENV{DEVTYPE}!="usb_device", GOTO="hid2hci_end"
diff --git a/abs/core-testing/udev/mount-usb b/abs/core-testing/udev/mount-usb
deleted file mode 100644
index 2d3b3f5..0000000
--- a/abs/core-testing/udev/mount-usb
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-
-DIR=/media
-DEVICE=$2
-LABEL=`/lib/udev/vol_id -L /dev/$DEVICE`
-FS=`/lib/udev/vol_id -t /dev/$DEVICE`
-
-
-mount_device () {
- if [ "$LABEL" == "" ];
- then
- mkdir -p $DIR/usb-$DEVICE
- case $FS in
- vfat) /bin/mount -t vfat -o rw,noauto,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 /dev/$DEVICE $DIR/usb-$DEVICE
- ;;
- *) /bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/$DEVICE $DIR/usb-$DEVICE
- ;;
- esac
- else
- mkdir -p $DIR/$LABEL
- echo $LABEL >$DIR/.$DEVICE
- case $FS in
- vfat) /bin/mount -t vfat -o rw,noauto,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 /dev/$DEVICE $DIR/$LABEL
- ;;
- *) /bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/$DEVICE $DIR/$LABEL
- ;;
- esac
- fi
-}
-
-umount_device () {
- if [ -e $DIR/usb-$DEVICE ];
- then
- umount -l $DIR/usb-$DEVICE
- rmdir $DIR/usb-$DEVICE;
- else
- ULABEL=`cat $DIR/.$DEVICE`
- umount -l $DIR/$ULABEL
- rmdir $DIR/$ULABEL
- rm $DIR/.$DEVICE;
- fi
-}
-
-case $1 in
- mount) mount_device
- ;;
- umount) umount_device
- ;;
- *) echo "Usage: mount-usb mount/umount sdxY"
-esac
diff --git a/abs/core-testing/udev/readme-udev-arch.txt b/abs/core-testing/udev/readme-udev-arch.txt
deleted file mode 100644
index e903a6b..0000000
--- a/abs/core-testing/udev/readme-udev-arch.txt
+++ /dev/null
@@ -1,266 +0,0 @@
-==========================
-Cold/Hotplugging with Udev
-==========================
-Version 1.1.6
-written by Tobias Powalowski <tpowa@archlinux.org>
-
----------------
-* Requirements:
----------------
-- recommended kernel >=2.6.18 for this udev to work properly.
-- No more DevFS device paths! If you have them, update /etc/fstab:
- /dev/discs/... etc. has been deprecated in favor of the old style:
- /dev/discs/disc0/part1 -> /dev/hda1
- /dev/discs/disc1/part2 -> /dev/hdb2
-- /etc/modprobe.conf should be cleaned from old install entries (see below).
-
----------------
-* Udev Changes:
----------------
-- The syntax of udev rules has been changed in >=098 release, please update your rules.
- --- Snip Changelog Udev 098
- Renaming of some key names:
- BUS -> SUBSYSTEMS
- ID -> KERNELS
- SYSFS -> ATTRS
- DRIVER -> DRIVERS
- ATTR{file}="value" can be used now, to write to a sysfs file of the
- event device. Instead of:
- ..., SYSFS{type}=="0|7|14", RUN+="/bin/sh -c 'echo 60 > /sys$$DEVPATH/timeout'"
- we now can do:
- ..., ATTR{type}=="0|7|14", ATTR{timeout}="60"
- All the PHYSDEV* keys are deprecated and will be removed from a
- future kernel:
- PHYDEVPATH - is the path of a parent device and should not be
- needed at all.
- PHYSDEVBUS - is just a SUBSYSTEM value of a parent, and can be
- matched with SUBSYSTEMS==
- PHYSDEVDRIVER - for bus devices it is available as ENV{DRIVER}.
- Newer kernels will have DRIVER in the environment,
- for older kernels udev puts in. Class device will
- no longer carry this property of a parent and
- DRIVERS== can be used to match such a parent value.
- Note that ENV{DRIVER} is only available for a few bus devices, where
- the driver is already bound at device event time. On coldplug, the
- events for a lot devices are already bound to a driver, and they will have
- that value set. But on hotplug, at the time the kernel creates the device,
- it can't know what driver may claim the device after that, therefore
- in most cases it will be empty.
- --- snap Changelog Udev 098
-- optional udev >= 099 Persistent rules generator for network and cd/dvd devices was added.
-- default udev rules are installed to /lib/udev/rules.d/, they can be overriden by placing
- own rules files to /etc/udev/rules.d/ .
-
----------------
-* How it works:
----------------
-- Udev replaces the functionality of hotplug and hwdetect scripts.
-- Udev does autoloading of modules and coldplugging.
-- Udev loads the modules simultaneously, which is much faster,
- but can cause some troubles with multiple network/sound/etc devices
- (see below).
-- To reload your rules please use '/sbin/udevadm trigger'.
-
-======================
-* Autoloading modules:
-======================
-
--------------------------------------------------------------------------
-* Module autoloading is controlled by MOD_AUTOLOAD="" in /etc/rc.conf
--------------------------------------------------------------------------
-MOD_AUTOLOAD="yes" in /etc/rc.conf is necessary:
-- if you want module autodetection
-- if you want modules be loaded by udev (hotplugging and coldplugging)
-
-MOD_AUTOLOAD="no" is necessary:
-- if you want to load modules strictly using 'modprobe <module>'
-- if you want to load only the modules listed in the MODULES=() array
- in /etc/rc.conf
-
----------------
-* Blacklisting:
----------------
-- means udev will never try to load the module, even if MOD_AUTOLOAD="yes"
- is set.
-
-You can do this in 2 ways:
-- MOD_BLACKLIST=(moduleA moduleB)
-- MODULES=(!moduleA !moduleB)
-
-Both entries mean the same thing to udev. MOD_BLACKLIST was used by hwdetect.
-hwdetect does not understand the MODULES= syntax, but it doesn't have to -- it
-is only used in mkinitrd now.
-
-==================================
-* Boot parameter: load_modules=off
-==================================
-
-- No modules are loaded during boot using udev autoloading or the MODULES array
-- Useful for repairing your system if something goes wrong during udev startup
- and/or during loading modules
-
-==================================
-* Boot parameter: disablemodules=
-==================================
-
-- list modules there that shouldn't be loaded by udev
-- Syntax: disablemodules=module1,module2,module3,...
-- Useful for repairing your system if something goes wrong during udev startup
- and/or during loading modules and you know the module that causes the trouble.
-
-========================================
-* Persistent CD/DVD symlinks (optional):
-========================================
-
-- To enable this feature copy in /etc/udev/rules.d
- 75-cd-aliases-generator.rules.optinal
- to 75-cd-aliases-generator.rules
- Also disable this part in /lib/udev/rules.d/81-arch.rules by putting a # in front:
- --- snip
- ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
- ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
- ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
- ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
- ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
- ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
---- snap
-
-- To get the same device name for CD/DVD symlinks each time you boot,
- a rule will be generated during bootup or by executing '/sbin/udevadm trigger'.
-- Examples: dvd, cdrom ,cdrw etc.
-- If you want to change those links,
- modify '/etc/udev/rules.d/70-peristent-cd.rules' to your needs.
-
-Known issues:
-The symlink name is then bound to the hardware pci adress,
-if you change your CD/DVD device, you have to check the
-/etc/udev/rules.d/70-peristent-net.rules file for correctness.
-
-======================================
-* Persistent Network names (optional):
-======================================
-
-- To enable this feature copy in /etc/udev/rules.d
- 75-persistent-net-generator.rules.optional
- to 75-persistent-net-generator.rules
-- To get the same network device name each time you boot,
- a rule will be generated during bootup or by executing '/sbin/udevadm trigger'.
-- Examples: eth0, eth1, wlan0 etc.
-- If you want to change those names,
- modify '/etc/udev/rules.d/70-peristent-net.rules' to your needs.
-- NAME= determines the name of your network card. Use these names in your
- network configuration in rc.conf as well.
-
-Known issues:
-The interface name is then bound to the hardware mac adress,
-if you change your network card, you have to check the
-/etc/udev/rules.d/70-peristent-net.rules file for correctness.
-
-====================================
-* Known Problems Hardware:
-====================================
-
-- BusLogic devices are broken and will cause a freeze during startup
-Solution:
-This is a kernel bug and no fix has been provided yet.
-
-- PCMCIA Card readers are not treated as removabel devices.
-Solution:
-To get access to them with hal's pmount backend add them to /etc/pmount.allow
-
-====================================
-* Known Problems MOD_AUTOLOAD="yes":
-====================================
-
------------------------------------------------------------------------------
-* Sound is not working or modules (eg. parport) are not loaded automatically:
------------------------------------------------------------------------------
-Solution:
-- Do you have a clean /etc/modprobe.conf?
- - A clean /etc/modprobe.conf is empty. The stock modprobe.conf file
- contains nothing
-- alsaconf can write output to modprobe.conf. Please keep that in mind.
-
----------------------------------------------
-* Devices get mixed up eg. Network/Soundcards
----------------------------------------------
-- Because udev loads all the modules at once, sometimes devices are initialized
- in different orders (eg. network cards switch eth0 and eth1, sound cards
- the same)
-
-Solution:
-- Load them in MODULES=() array in the order you need them
-- eg: MODULES=(moduleA moduleB)
-
-Second solution for network:
-- The "proper" way to configure net interfaces to hold static names within
- udev rules. Add lines like these to a custom rules file such as
- /etc/udev/rules.d/01-network.rules:
- SUBSYSTEM=="net", SYSFS{address}=="aa:bb:cc:dd:ee:ff", NAME="lan0"
- SUBSYSTEM=="net", SYSFS{address}=="ff:ee:dd:cc:bb:aa", NAME="wlan0"
-
-- To get the right mac address use this command:
- udevinfo -a -p /sys/class/net/<yourdevice>
-- Make sure you use lower-case hex values in your udev rules.
-- NAME= determines the name of your network card. Use these names in your
- network configuration in rc.conf as well.
-
-Third solution for network:
-- check Persistent Network part
-
------------------------------------
-* Network 8139too & 8139cp problem:
------------------------------------
-- Both modules have the same kernel entry, which can cause problems.
-Solution:
-- Enter the one you need in MODULES=() and blacklist the other one
-- eg: MODULES=(!8139cp 8139too)
-- The example tells udev to ignore 8139cp module and load 8139too afterwards.
-
---------------------------------------------------------
-* You need a special loading order to get devices going:
---------------------------------------------------------
-- Kernel loads modules in wrong order.
-Solution:
-- Load them in the correct order in MODULES=()
-
------------------------------
-* Module is not autodetected:
------------------------------
-- If your device does not provide a modalias in /sys it cannot be autodetected.
-- If modalias is not combined to a kernel module it cannot be autodetected.
-Known modules that are not autodetected:
-- SCSI CONTROLLER:
- scsi_transport_sas ultrastor qlogicfas eata BusLogic pas16 wd7000 sym53c416
- g_NCR5380_mmio fdomain u14-34f dtc initio in2000 imm t128 aha1542 aha152x
- atp870u g_NCR5380 NCR53c406a qlogicfas408 megaraid_mm advansys
-- NETWORK CARDS:
- hp ne de4x5 wd cs89x0 eepro smc9194 seeq8005 ni52 ni65 ac3200 smc-ultra
- at1700 hp-plus depca eexpress 82596 de600 eth16i de620 lance ewrk3 e2100
- lp486e 3c501 3c503 3c505 3c507 3c509 3c515 myri10ge
-Solution:
-- Enter the one you need in MODULES=()
-
-=======================================
-* Known Problems with MOD_AUTOLOAD="no"
-=======================================
-
------------------------------------------------------------------
-* Modules are not loaded anymore during coldplug or hotplug event
------------------------------------------------------------------
-- Udev is usually responsible for this, but the MOD_AUTOLOAD switch will
- now disable it. If you want automatic hot/cold-plugging, turn on
- MOD_AUTOLOAD. Otherwise you will have to load all your modules manually,
- either with /sbin/modprobe or entries in the MODULES=() array.
-Solution:
-- For bootup (coldplug) enter this in rc.conf: MODULES=(moduleA moduleB)
-- After bootup (hotplug) use this: modprobe <moduleA>
-
-=========================================
-* Known problems for custom kernel users:
-=========================================
-
-----------------------------
-* Udev doesn't start at all:
-----------------------------
-- Check Requirements list
diff --git a/abs/core-testing/udev/resolve-modalias.c b/abs/core-testing/udev/resolve-modalias.c
deleted file mode 100644
index d1680b1..0000000
--- a/abs/core-testing/udev/resolve-modalias.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <stdio.h>
-#include <fnmatch.h>
-#include <string.h>
-#include <malloc.h>
-
-static char *getline(FILE *file) {
- static size_t size = 1024;
- static char *buf = NULL;
- static unsigned int i = 0, r = 0;;
-
- if(buf == NULL)
- buf = (char*)malloc(size);
-
- if(i) {
- memmove(buf, buf+i, size-i);
- r -= i;
- i = 0;
- }
-
- while(1) {
- if(i == size) {
- size *= 2;
- buf = (char*)realloc(buf, size);
- }
-
- if(i==r)
- r += fread(buf+i, 1, size-i, file);
-
- if(i==r && i == 0) {
- free(buf);
- buf = NULL;
- r = 0;
- return NULL;
- }
-
- if(i==r || buf[i] == '\n') {
- buf[i++] = '\0';
- return buf;
- }
- i++;
- }
-}
-
-int main(int argc, char *argv[]) {
- FILE *f=fopen(argv[1], "r");
- char *line, *pattern, *module;
- char *pos1, *pos2;
-
- while((line=getline(f))!=NULL) {
- if(!strncmp(line, "alias", strlen("alias"))) {
- pos1 = index(line, ' ');
- pos2 = index(pos1+1, ' ');
- pattern = pos1+1;
- *pos2 = '\0';
- module = pos2+1;
-
- if(!fnmatch(pattern, argv[2], 0))
- printf("%s\n", module);
- }
- }
- return 0;
-}
diff --git a/abs/core-testing/udev/start_udev b/abs/core-testing/udev/start_udev
deleted file mode 100755
index 03c38fd..0000000
--- a/abs/core-testing/udev/start_udev
+++ /dev/null
@@ -1,137 +0,0 @@
-#! /bin/sh
-#
-# start_udev
-# script to initialize /dev by using udev.
-#
-# Modified for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-#
-# Inspired by:
-#
-# Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
-#
-# Released under the GPL v2 only.
-#
-# This needs to be run at the earliest possible point in the boot
-# process.
-#
-# Based on the udev init.d script
-#
-# Thanks go out to the Gentoo developers for proving
-# that this is possible to do.
-#
-# Yes, it's very verbose, feel free to turn off all of the echo calls,
-# they were there to make me feel better that everything was working
-# properly during development...
-#
-
-prog=udev
-sysfs_dir=/sys
-bin=/sbin/udev
-udevd=/sbin/udevd
-udev_root="/dev"
-
-starttime=$(date +%s)
-
-
-function trigger_builtin_events() {
- list="$(echo /sys/class/tty/ttyS*/uevent)"
- for i in $list; do
- case "$i" in
- */class/uevent|*\**)
- continue
- ;;
- */class/tty/ttyS*)
- echo "add" > "$i"
- ;;
- esac
- done
- }
-
-function trigger_device_events() {
- /sbin/udevtrigger
-}
-
-function wait_for_queue() {
-# loop=20
-# while ! [ "$loop" -gt 0 -a -d /dev/.udev/queue ]; do
-# sleep 0.1;
-# loop=$(($loop - 1))
-# done
- /sbin/udevsettle
-}
-
-make_extra_nodes () {
- # there are a few things that sysfs does not export for us.
- # these things go here (and remember to remove them in
- # remove_extra_nodes()
- #
- # Thanks to Gentoo for the initial list of these.
- ln -snf /proc/self/fd $udev_root/fd
- ln -snf /proc/self/fd/0 $udev_root/stdin
- ln -snf /proc/self/fd/1 $udev_root/stdout
- ln -snf /proc/self/fd/2 $udev_root/stderr
- ln -snf /proc/kcore $udev_root/core
-
- mkdir $udev_root/pts
- mkdir $udev_root/shm
-}
-
-udev_init () {
-# don't use udev if sysfs is not mounted.
-if [ ! -d $sysfs_dir/block ]; then
- exit 1
-fi
-
-echo "mounting... ramfs at $udev_root"
-mount -n -t ramfs none $udev_root
-
-# propogate /udev from /sys
-echo "Creating initial udev device nodes:"
-
-#echo "making extra nodes"
-make_extra_nodes
-
-# check if udevd is already running
-if [ `pidof -o %PPID /sbin/udevd` ]; then
- grep -v "/dev/shm" /etc/mtab | grep -v "/dev/pts" > /etc/mtab
- mount /dev/pts
- mount /dev/shm
-else
- echo "start udev daemon"
- /sbin/udevd --daemon
-fi
-case "$(uname -r)" in
- 2.6.[0-9]|2.6.[0-9][!0-9]*) ;;
- *) if [ -f "/sys/class/tty/console/uevent" ]; then
- echo "Kernel >= 2.6.15 and supports uevents"
- # trigger the sorted events
- echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
- # catch events that are real fast
- mkdir -p /dev/.udev/queue
- trigger_builtin_events
- else
- # for older kernels without uevents will be removed when udevstart dies in udev
- echo "Kernel does not support uevents, you need a kernel >= 2.6.15!"
- exit 1
- fi
- ;;
-esac
-}
-
-udev_uevents () {
-# configure all devices
-trigger_device_events
-# until we know how to do better, just wait for _all_ events to finish
-wait_for_queue
-}
-
-if [ $# -eq 0 ]; then
-udev_init
-udev_uevents
-fi
-
-[ "$1" = "init" ] && udev_init
-[ "$1" = "uevents" ] && udev_uevents
-
-echo "udev startup is finished! - time = $(( `date +%s` - $starttime ))"
-exit 0
diff --git a/abs/core-testing/udev/udev-ntfs-3g.patch b/abs/core-testing/udev/udev-ntfs-3g.patch
deleted file mode 100644
index 366c41f..0000000
--- a/abs/core-testing/udev/udev-ntfs-3g.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-diff -ruaN udev-135.orig/extras/volume_id/lib/ntfs.c udev-135/extras/volume_id/lib/ntfs.c
---- udev-135.orig/extras/volume_id/lib/ntfs.c 2008-11-13 20:42:56.000000000 +0000
-+++ udev-135/extras/volume_id/lib/ntfs.c 2009-06-28 23:31:01.000000000 +0000
-@@ -194,7 +194,7 @@
- }
-
- volume_id_set_usage(id, VOLUME_ID_FILESYSTEM);
-- id->type = "ntfs";
-+ id->type = "ntfs-3g";
- /* we think this is ntfs, but we make sure no other signatures are found */
- id->force_unique_result = 1;
- return 0;
-diff -ruaN udev-135.orig/extras/volume_id/lib/ntfs.c~ udev-135/extras/volume_id/lib/ntfs.c~
---- udev-135.orig/extras/volume_id/lib/ntfs.c~ 1970-01-01 00:00:00.000000000 +0000
-+++ udev-135/extras/volume_id/lib/ntfs.c~ 2008-11-13 20:42:56.000000000 +0000
-@@ -0,0 +1,201 @@
-+/*
-+ * volume_id - reads filesystem label and uuid
-+ *
-+ * Copyright (C) 2004 Kay Sievers <kay.sievers@vrfy.org>
-+ *
-+ * This program is free software: you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation, either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _GNU_SOURCE
-+#define _GNU_SOURCE 1
-+#endif
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <string.h>
-+#include <errno.h>
-+#include <ctype.h>
-+
-+#include "libvolume_id.h"
-+#include "libvolume_id-private.h"
-+
-+static struct ntfs_super_block {
-+ uint8_t jump[3];
-+ uint8_t oem_id[8];
-+ uint16_t bytes_per_sector;
-+ uint8_t sectors_per_cluster;
-+ uint16_t reserved_sectors;
-+ uint8_t fats;
-+ uint16_t root_entries;
-+ uint16_t sectors;
-+ uint8_t media_type;
-+ uint16_t sectors_per_fat;
-+ uint16_t sectors_per_track;
-+ uint16_t heads;
-+ uint32_t hidden_sectors;
-+ uint32_t large_sectors;
-+ uint16_t unused[2];
-+ uint64_t number_of_sectors;
-+ uint64_t mft_cluster_location;
-+ uint64_t mft_mirror_cluster_location;
-+ int8_t cluster_per_mft_record;
-+ uint8_t reserved1[3];
-+ int8_t cluster_per_index_record;
-+ uint8_t reserved2[3];
-+ uint8_t volume_serial[8];
-+ uint16_t checksum;
-+} PACKED *ns;
-+
-+static struct master_file_table_record {
-+ uint8_t magic[4];
-+ uint16_t usa_ofs;
-+ uint16_t usa_count;
-+ uint64_t lsn;
-+ uint16_t sequence_number;
-+ uint16_t link_count;
-+ uint16_t attrs_offset;
-+ uint16_t flags;
-+ uint32_t bytes_in_use;
-+ uint32_t bytes_allocated;
-+} PACKED *mftr;
-+
-+static struct file_attribute {
-+ uint32_t type;
-+ uint32_t len;
-+ uint8_t non_resident;
-+ uint8_t name_len;
-+ uint16_t name_offset;
-+ uint16_t flags;
-+ uint16_t instance;
-+ uint32_t value_len;
-+ uint16_t value_offset;
-+} PACKED *attr;
-+
-+static struct volume_info {
-+ uint64_t reserved;
-+ uint8_t major_ver;
-+ uint8_t minor_ver;
-+} PACKED *info;
-+
-+#define MFT_RECORD_VOLUME 3
-+#define MFT_RECORD_ATTR_VOLUME_NAME 0x60
-+#define MFT_RECORD_ATTR_VOLUME_INFO 0x70
-+#define MFT_RECORD_ATTR_OBJECT_ID 0x40
-+#define MFT_RECORD_ATTR_END 0xffffffffu
-+
-+int volume_id_probe_ntfs(struct volume_id *id, uint64_t off, uint64_t size)
-+{
-+ unsigned int sector_size;
-+ unsigned int cluster_size;
-+ uint64_t mft_cluster;
-+ uint64_t mft_off;
-+ unsigned int mft_record_size;
-+ unsigned int attr_type;
-+ unsigned int attr_off;
-+ unsigned int attr_len;
-+ unsigned int val_off;
-+ unsigned int val_len;
-+ const uint8_t *buf;
-+ const uint8_t *val;
-+
-+ info("probing at offset 0x%" PRIx64 "\n", off);
-+
-+ ns = (struct ntfs_super_block *) volume_id_get_buffer(id, off, 0x200);
-+ if (ns == NULL)
-+ return -1;
-+
-+ if (memcmp(ns->oem_id, "NTFS", 4) != 0)
-+ return -1;
-+
-+ volume_id_set_uuid(id, ns->volume_serial, 0, UUID_64BIT_LE);
-+
-+ sector_size = le16_to_cpu(ns->bytes_per_sector);
-+ if (sector_size < 0x200)
-+ return -1;
-+
-+ cluster_size = ns->sectors_per_cluster * sector_size;
-+ mft_cluster = le64_to_cpu(ns->mft_cluster_location);
-+ mft_off = mft_cluster * cluster_size;
-+
-+ if (ns->cluster_per_mft_record < 0)
-+ /* size = -log2(mft_record_size); normally 1024 Bytes */
-+ mft_record_size = 1 << -ns->cluster_per_mft_record;
-+ else
-+ mft_record_size = ns->cluster_per_mft_record * cluster_size;
-+
-+ dbg("sectorsize 0x%x\n", sector_size);
-+ dbg("clustersize 0x%x\n", cluster_size);
-+ dbg("mftcluster %" PRIu64 "\n", mft_cluster);
-+ dbg("mftoffset 0x%" PRIx64 "\n", mft_off);
-+ dbg("cluster per mft_record %i\n", ns->cluster_per_mft_record);
-+ dbg("mft record size %i\n", mft_record_size);
-+
-+ buf = volume_id_get_buffer(id, off + mft_off + (MFT_RECORD_VOLUME * mft_record_size),
-+ mft_record_size);
-+ if (buf == NULL)
-+ return -1;
-+
-+ mftr = (struct master_file_table_record*) buf;
-+ dbg("mftr->magic '%c%c%c%c'\n", mftr->magic[0], mftr->magic[1], mftr->magic[2], mftr->magic[3]);
-+ if (memcmp(mftr->magic, "FILE", 4) != 0)
-+ return -1;
-+
-+ attr_off = le16_to_cpu(mftr->attrs_offset);
-+ dbg("file $Volume's attributes are at offset %i\n", attr_off);
-+
-+ while (1) {
-+ attr = (struct file_attribute*) &buf[attr_off];
-+ attr_type = le32_to_cpu(attr->type);
-+ attr_len = le16_to_cpu(attr->len);
-+ val_off = le16_to_cpu(attr->value_offset);
-+ val_len = le32_to_cpu(attr->value_len);
-+ attr_off += attr_len;
-+
-+ if (attr_len == 0)
-+ break;
-+
-+ if (attr_off >= mft_record_size)
-+ break;
-+
-+ if (attr_type == MFT_RECORD_ATTR_END)
-+ break;
-+
-+ dbg("found attribute type 0x%x, len %i, at offset %i\n",
-+ attr_type, attr_len, attr_off);
-+
-+ if (attr_type == MFT_RECORD_ATTR_VOLUME_INFO) {
-+ dbg("found info, len %i\n", val_len);
-+ info = (struct volume_info*) (((uint8_t *) attr) + val_off);
-+ snprintf(id->type_version, sizeof(id->type_version)-1,
-+ "%u.%u", info->major_ver, info->minor_ver);
-+ }
-+
-+ if (attr_type == MFT_RECORD_ATTR_VOLUME_NAME) {
-+ dbg("found label, len %i\n", val_len);
-+ if (val_len > VOLUME_ID_LABEL_SIZE)
-+ val_len = VOLUME_ID_LABEL_SIZE;
-+
-+ val = ((uint8_t *) attr) + val_off;
-+ volume_id_set_label_raw(id, val, val_len);
-+ volume_id_set_label_unicode16(id, val, LE, val_len);
-+ }
-+ }
-+
-+ volume_id_set_usage(id, VOLUME_ID_FILESYSTEM);
-+ id->type = "ntfs";
-+ /* we think this is ntfs, but we make sure no other signatures are found */
-+ id->force_unique_result = 1;
-+ return 0;
-+}
diff --git a/abs/core-testing/udev/udev.install b/abs/core-testing/udev/udev.install
index bb8b166..b4ce3c8 100644
--- a/abs/core-testing/udev/udev.install
+++ b/abs/core-testing/udev/udev.install
@@ -1,15 +1,16 @@
# arg 1: the new package version
# arg 2: the old package version
+
post_upgrade() {
-if [ "$(vercmp $2 100)" -lt 0 ]; then
- echo "ATTENTION UDEV:"
- echo "----------"
- echo "udev >=098 rules syntax has changed, please update your own rules."
- echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
- echo "Please read the instructions carefully before reboot."
- echo "They are located in /etc/udev/readme-udev-arch.txt"
- echo "----------"
-fi
+ if [ "$(vercmp $2 100)" -lt 0 ]; then
+ echo "ATTENTION UDEV:"
+ echo "----------"
+ echo "udev >=098 rules syntax has changed, please update your own rules."
+ echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
+ echo "Please read the instructions carefully before reboot."
+ echo "They are located in /etc/udev/readme-udev-arch.txt"
+ echo "----------"
+ fi
}
post_install() {
@@ -26,7 +27,3 @@ post_install() {
rmdir ${ROOTDIR}
fi
}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core-testing/udev/udev.rules b/abs/core-testing/udev/udev.rules
deleted file mode 100644
index f789e50..0000000
--- a/abs/core-testing/udev/udev.rules
+++ /dev/null
@@ -1,456 +0,0 @@
-# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-#
-# This ruleset should provide a DevFS-compatible device tree.
-#
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %k the kernel name for the device.
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute.
-# %% the '%' char itself.
-#
-# There are a number of modifiers that are allowed to be used in some of the
-# fields. See the udev man page for a full description of them.
-# global stuff
-#
-
-#####################################
-# Early rules - begin
-#####################################
-# wait for sysfs
-ACTION=="add", KERNEL=="[0-9]*:[0-9]*", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
-# Setting timeout for tape-devices (type 1) to 900 seconds
-# and 60 seconds for device types 0, 7 and 14
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
-SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
-#####################################
-# Early rules -end
-#####################################
-
-#####################################
-###### Hotplug rules - begin
-#####################################
-# check if the device has already been claimed by a driver
-ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_driver_loaded"
-ACTION!="add", GOTO="hotplug_not_add_event"
-
-#Skip auto-loading of framebuffer devices
-KERNEL=="fb[0-9]*", GOTO="hotplug_driver_loaded"
-
-# Modaliases to load
-ENV{MODALIAS}=="?*", RUN{ignore_error}+="/lib/udev/load-modules.sh $env{MODALIAS}"
-
-# SCSI addon modules
-SUBSYSTEM=="scsi", ATTRS{type}=="[07]", RUN+="/lib/udev/load-modules.sh sd_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="14", RUN+="/lib/udev/load-modules.sh sd_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sr_mod"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}!="ADR*", RUN+="/lib/udev/load-modules.sh osst"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}=="Onstream", ATTRS{model}=="ADR*", RUN+="/lib/udev/load-modules.sh st"
-SUBSYSTEM=="scsi", ATTRS{type}=="1", ATTRS{vendor}!="Onstream", RUN+="/lib/udev/load-modules.sh st"
-SUBSYSTEM=="scsi", ATTRS{type}=="[235689]", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
-
-# load sg module for burners
-SUBSYSTEM=="block", ATTRS{type}=="[45]", RUN+="/lib/udev/load-modules.sh sg"
-
-# MMC block devices
-SUBSYSTEM=="mmc", RUN+="/lib/udev/load-modules.sh mmc_block"
-
-# I2O block devices
-SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
-
-# Skip already claimed drivers
-DRIVERS=="?*", GOTO="hotplug_driver_loaded"
-
-# PNP modules
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/load-modules.sh pnp:d$$id; /lib/udev/load-modules.sh pnp:c$$id ; done < /sys$devpath/id'"
-
-# SOUND addon modules
-SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-pcm-oss"
-SUBSYSTEM=="sound", RUN+="/lib/udev/load-modules.sh snd-seq-oss"
-
-LABEL="hotplug_driver_loaded"
-
-#PNP addon modules
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
-# not needed anymore with kernel >= 2.6.21
-#ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0b00", RUN+="/lib/udev/load-modules.sh rtc_cmos"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0510*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP0511*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0501", RUN+="/lib/udev/load-modules.sh ppp-generic"
-
-# PARPORT addon modules
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
-ACTION=="add", SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh ppdev"
-
-# fix ide cdrom detection on old proliant servers
-ACTION=="add", SUBSYSTEM=="pci", ENV{MODALIAS}=="pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00", RUN+="/lib/udev/load-modules.sh ide-generic"
-
-# FIRMWARE
-ACTION=="add", SUBSYSTEM=="firmware", ENV{FIRMWARE}=="?*", RUN+="/lib/udev/firmware.sh"
-LABEL="hotplug_not_add_event"
-#####################################
-##### Hotplug rules - end
-#####################################
-
-#####################################
-###### CD/DVD symlinks - begin
-#####################################
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="scd[a-z]", IMPORT="/lib/udev/cdrom_id --export $tempnode"
-ENV{ID_CDROM}=="?*", SYMLINK+="cd/cdrom-%b"
-ENV{ID_CDROM_CD_RW}=="?*", SYMLINK+="cd/cdrw-%b"
-ENV{ID_CDROM_DVD}=="?*", SYMLINK+="cd/dvd-%b"
-ENV{ID_CDROM_DVD_R}=="?*", SYMLINK+="cd/dvd-%b"
-ACTION=="add", SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="add", SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="hd[a-z]", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sr[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
-ACTION=="remove", SUBSYSTEMS=="block", KERNEL=="sg[0-9]*", RUN+="/lib/udev/cdsymlinks.sh"
-#####################################
-###### CD/DVD symlinks - end
-#####################################
-
-# fix /dev/root symlink
-SUBSYSTEM=="block", RUN+="/lib/udev/root-link.sh"
-
-#####################################
-# Permissions and Symlinks - begin
-#####################################
-# default permissions for all block devices
-SUBSYSTEM=="block", GROUP="disk"
-
-# permissions for IDE CD devices
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
-
-# permissions for SCSI CD devices
-SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROUP="optical"
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
-
-# permissions for IDE floppy devices
-SUBSYSTEMS=="ide", KERNEL=="hd*", ATTRS{media}=="floppy*", NAME{all_partitions}="%k", GROUP="floppy"
-
-# permissions for removable devices like cardreaders or sticks
-KERNEL=="sd*", ATTRS{scsi_level}=="0", ATTRS{type}=="0", GROUP="storage"
-
-# permissions for firewire external drives
-KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
-
-# permissions for usb to scsi external adapters
-KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="7", GROUP="storage"
-
-# permissions for ide storage like pcmcia card readers
-ACTION!="add", GOTO="pcmcia_end"
-SUBSYSTEM!="block", GOTO="pcmcia_end"
-KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
-KERNEL=="hd*", IMPORT{parent}=="ID_*"
-KERNEL=="hd*", ENV{ID_TYPE}=="generic", GROUP="storage"
-LABEL="pcmcia_end"
-
-# permissions for SCSI scanners
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
-
-# pty and tty legacy devices
-KERNEL=="pty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
-KERNEL=="tty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
-
-# md block devices
-KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
-
-# device-mapper
-KERNEL=="device-mapper", NAME="mapper/control"
-
-# floppy devices
-KERNEL=="fd[0-9]*", NAME="fd%n", SYMLINK+="floppy/%n fd%nu1440 fd%nu720 fd%nh1200 fd%nu360", GROUP="floppy"
-
-# tty devices
-SUBSYSTEM=="tty", GROUP="tty"
-KERNEL=="tty[0-9]*", NAME="vc/%n", SYMLINK+="%k"
-KERNEL=="ttyS[0-9]*", NAME="tts/%n", SYMLINK+="ttyS%n"
-KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", SYMLINK+="%k"
-
-# vc devices
-KERNEL=="vcs", NAME="vcc/0", OPTIONS="last_rule"
-KERNEL=="vcs[0-9]*", NAME="vcc/%n", OPTIONS="last_rule"
-KERNEL=="vcsa", NAME="vcc/a0", OPTIONS="last_rule"
-KERNEL=="vcsa[0-9]*", NAME="vcc/a%n", OPTIONS="last_rule"
-KERNEL=="ptmx", MODE="0666", OPTIONS="last_rule"
-KERNEL=="tty", MODE="0666", OPTIONS="last_rule"
-
-# video devices
-SUBSYSTEM=="video4linux", GROUP="video"
-KERNEL=="dvb*", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; A=$${K%%%%.*}; D=$${K#*.}; echo dvb/adapter$$A/$$D'", \
- NAME="%c", GROUP="video"
-### xorg resets those permissions, adjust your xorg.conf!
-KERNEL=="nvidia*", GROUP="video"
-KERNEL=="card[0-9]*", NAME="dri/%k", GROUP="video"
-KERNEL=="3dfx*", GROUP="video"
-
-# v4l devices
-KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="video0", SYMLINK+="video"
-KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
-KERNEL=="radio0", SYMLINK+="radio"
-KERNEL=="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="vbi0", SYMLINK+="vbi"
-KERNEL=="vtx[0-9]*", NAME="v4l/vtx%n", SYMLINK+="%k", GROUP="video"
-KERNEL=="vtx0", SYMLINK+="vtx"
-
-# i2c devices
-KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
-
-# loop devices
-KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k"
-
-# ramdisks
-KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
-
-# framebuffer devices
-KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
-
-# misc
-KERNEL=="rtc*", NAME="misc/%k", SYMLINK+="%k", GROUP="audio", MODE="0664"
-KERNEL=="rtc0", SYMLINK+="rtc"
-KERNEL=="nvram", NAME="misc/%k", SYMLINK+="%k", GROUP="kmem", MODE="0640"
-KERNEL=="psaux", NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k" GROUP="video"
-KERNEL=="uinput", NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="random", MODE="0666"
-KERNEL=="urandom", MODE="0666"
-KERNEL=="mem", MODE="0640", GROUP="kmem"
-KERNEL=="kmem", MODE="0640", GROUP="kmem"
-KERNEL=="port", MODE="0640", GROUP="kmem"
-KERNEL=="full", MODE="0666"
-KERNEL=="null", MODE="0666"
-KERNEL=="zero", MODE="0666"
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-KERNEL=="inotify", NAME="misc/%k", SYMLINK+="%k", MODE="0666"
-KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid", SYMLINK="%k"
-KERNEL=="msr[0-9]*", NAME="cpu/%n/msr", SYMLINK="%k"
-
-# sound devices
-# alsa devices
-SUBSYSTEM=="sound", GROUP="audio"
-KERNEL=="controlC[0-9]*", NAME="snd/%k"
-KERNEL=="hw[CD0-9]*", NAME="snd/%k"
-KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
-KERNEL=="midi[CD0-9]*", NAME="snd/%k"
-KERNEL=="timer", NAME="snd/%k"
-KERNEL=="seq", NAME="snd/%k"
-# oss devices
-KERNEL=="audio*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dmmidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="admmidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="dsp*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="adsp*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="midi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="amidi*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="mixer*", NAME="sound/%k", SYMLINK+="%k"
-KERNEL=="sequencer*", NAME="sound/%k", SYMLINK+="%k"
-
-# input devices
-KERNEL=="mice", NAME="input/%k", MODE="0644"
-KERNEL=="mouse*", NAME="input/%k", MODE="0644"
-KERNEL=="event*", NAME="input/%k"
-KERNEL=="js*", NAME="input/%k", MODE="0664"
-KERNEL=="ts*", NAME="input/%k"
-KERNEL=="uinput", NAME="input/%k"
-
-# USB devices
-KERNEL=="hiddev*", NAME="usb/%k"
-KERNEL=="auer*", NAME="usb/%k"
-KERNEL=="legousbtower*", NAME="usb/%k", MODE="0666"
-KERNEL=="dabusb*", NAME="usb/%k"
-SUBSYSTEMS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k", GROUP="lp"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Palm Handheld*", SYMLINK+="pilot"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="palmOne Handheld*", SYMLINK+="pilot"
-SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{product}=="Handspring Visor*", SYMLINK+="pilot"
-
-# printer devices
-SUBSYSTEM=="printer", GROUP="lp"
-
-# netlink devices
-KERNEL=="route", NAME="netlink/%k"
-KERNEL=="skip", NAME="netlink/%k"
-KERNEL=="usersock", NAME="netlink/%k"
-KERNEL=="fwmonitor", NAME="netlink/%k"
-KERNEL=="tcpdiag", NAME="netlink/%k"
-KERNEL=="nflog", NAME="netlink/%k"
-KERNEL=="xfrm", NAME="netlink/%k"
-KERNEL=="arpd", NAME="netlink/%k"
-KERNEL=="route6", NAME="netlink/%k"
-KERNEL=="ip6_fw", NAME="netlink/%k"
-KERNEL=="dnrtmsg", NAME="netlink/%k"
-### ! disabled seems to break device creation !
-# KERNEL=="tap*", NAME="netlink/%k"
-
-# CAPI devices
-KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20"
-KERNEL=="capi*", NAME="capi/%n"
-
-# Network devices
-KERNEL=="tun", NAME="net/%k", OPTIONS+="ignore_remove"
-KERNEL=="ppp", OPTIONS+="ignore_remove"
-
-# IEEE1394 (firewire) devices
-KERNEL=="raw1394", NAME="%k", GROUP="video"
-KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
-KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
-
-# raw devices
-KERNEL=="raw[0-9]*", NAME="raw/%k"
-
-# kbd devices
-KERNEL=="kbd", MODE="0664"
-
-# packet devices
-KERNEL=="pktcdvd", NAME="pktcdvd/control", GROUP="optical", MODE="0660"
-KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="optical", MODE="0660"
-
-# usbfs-like device nodes, libusb device access
-# for kernel 2.6.21 and below
-SUBSYSTEM=="usb_device", ACTION=="add", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev};printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0664"
-# starting from kernel 2.6.22 use this rule
-SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664"
-#######################################
-# Permissions and Symlinks - end
-#######################################
-
-#######################################
-# Persistant block device stuff - begin
-#######################################
-# persistent storage links: /dev/{disk,tape}/{by-id,by-uuid,by-label,by-path,by-name}
-# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
-
-# needed like this!!!
-ACTION!="add|change", GOTO="persistent_storage_end"
-KERNEL=="nst[0-9]", SUBSYSTEMS=="scsi", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
-
-# type 8 devices are "Medium Changers"
-KERNEL=="sg*", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-SUBSYSTEM!="block", GOTO="persistent_storage_end"
-
-# skip rules for inappropriate block devices
-# don't add dm-*!!!
-KERNEL=="ram*|loop*|fd*|nbd*|gnbd*|md*", GOTO="persistent_storage_end"
-
-# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
-KERNEL=="hd*[!0-9]", ATTR{removable}=="1", DRIVERS=="ide-cs|ide-floppy", GOTO="persistent_storage_end"
-KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GOTO="persistent_storage_end"
-
-# ignore partitions that span the entire disk
-ATTR{whole_disk}=="*", GOTO="persistent_storage_end"
-
-# /sys/class/block will export this
-ENV{DEVTYPE}!="?*", ATTR{range}=="?*", ENV{DEVTYPE}="disk"
-ENV{DEVTYPE}!="?*", ATTR{start}=="?*", ENV{DEVTYPE}="partition"
-
-# for partitions import parent information
-ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
-
-# by-id (hardware serial number)
-KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
-KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
-KERNEL=="hd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"
-
-KERNEL=="sd*[!0-9]|sr*|st*", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_SUBSYSTEMS}="ieee1394"
-KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export %p"
-KERNEL=="sd*[!0-9]|sr*|st*", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --fallback-to-sysfs -s %p -d $tempnode"
-KERNEL=="cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="/lib/udev/scsi_id --export --whitelisted --ignore-sysfs -s %p -d $tempnode", ENV{ID_BUS}="cciss"
-KERNEL=="sd*[!0-9]|sr*|cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="sd*[0-9]|cciss*p[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
-KERNEL=="st*", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-
-# libata compat (links like hd*)
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_VENDOR}=="ATA", PROGRAM="/lib/udev/ata_id $tempnode", RESULT=="?*", ENV{ID_ATA_COMPAT}="$result", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}"
-KERNEL=="sd*[0-9]", ENV{ID_ATA_COMPAT}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_ATA_COMPAT}-part%n"
-
-KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
-
-# by-path (shortest physical path)
-ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/path_id %p"
-ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
-ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
-KERNEL=="st*", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
-
-KERNEL=="sr*|st*", GOTO="persistent_storage_end"
-KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GOTO="persistent_storage_end"
-
-# by-label/by-uuid (filesystem properties)
-IMPORT{program}="/lib/udev/vol_id --export $tempnode"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-
-# BIOS Enhanced Disk Device
-ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/edd_id --export $tempnode"
-ENV{DEVTYPE}=="disk", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}"
-ENV{DEVTYPE}=="partition", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}-part%n"
-LABEL="persistent_storage_end"
-
-# md links hook into "change" events, when the array becomes available
-KERNEL!="md[0-9]*", GOTO="md_end"
-ACTION!="add|change", GOTO="md_end"
-
-ATTR{md/array_state}=="|clear|inactive", GOTO="md_end"
-IMPORT{program}="/lib/udev/vol_id --export $tempnode"
-OPTIONS="link_priority=100"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-LABEL="md_end"
-# Persistant block device stuff - end
-#####################################
-
-#######################################
-# Persistant input stuff - begin
-#######################################
-SUBSYSTEM!="input", GOTO="persistent_input_end"
-ACTION!="add", GOTO="persistent_input_end"
-# ignore the mid-level drivers
-KERNEL=="input[0-9]*", GOTO="persistent_input_end"
-
-# usb devices
-SUBSYSTEMS=="usb", IMPORT{program}="/lib/udev/usb_id --export"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="01", ENV{ID_CLASS}="kbd"
-SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceProtocol}=="02", ENV{ID_CLASS}="mouse"
-
-# other devices
-DRIVERS=="pcspkr", ENV{ID_CLASS}="spkr"
-DRIVERS=="atkbd", ENV{ID_CLASS}="kbd"
-DRIVERS=="psmouse", ENV{ID_CLASS}="mouse"
-ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{ID_CLASS}="ir"
-ATTRS{modalias}=="input:*-*a[068],*|input:*-*a*,[68],*m*", ATTRS{modalias}!="input:*-*k*14A,*r*", ENV{ID_CLASS}="joystick"
-
-# fill empty serial number
-ENV{ID_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
-
-# by-id links, generic and for the event devices
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{ID_SERIAL}=="?*", ENV{ID_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{ID_CLASS}"
-
-
-# by-path links
-IMPORT{program}="/lib/udev/path_id %p"
-KERNEL=="mouse*|js*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{ID_CLASS}"
-KERNEL=="event*", ENV{ID_PATH}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{ID_CLASS}"
-
-LABEL="persistent_input_end"
-#####################################
-# Persistant input stuff - end
-#####################################
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
-
-# debugging monitor
-RUN+="socket:/org/kernel/udev/monitor"
diff --git a/abs/core-testing/udev/usb-storage.rules b/abs/core-testing/udev/usb-storage.rules
deleted file mode 100644
index a7e0726..0000000
--- a/abs/core-testing/udev/usb-storage.rules
+++ /dev/null
@@ -1,4 +0,0 @@
-SUBSYSTEMS=="usb", KERNEL=="sd[b-z]", NAME="%k", SYMLINK+="usb-%k", GROUP="users", OPTIONS="last_rule"
-ACTION=="add", SUBSYSTEMS=="usb", KERNEL=="sd[b-z][0-9]", SYMLINK+="usb-%k", GROUP="users", NAME="%k"
-ACTION=="add", SUBSYSTEMS=="usb", KERNEL=="sd[b-z][0-9]", RUN+="/etc/udev/scripts/mount-usb mount %k", OPTIONS="last_rule"
-ACTION=="remove", SUBSYSTEMS=="block", RUN+="/etc/udev/scripts/mount-usb umount %k", OPTIONS="last_rule"#