summaryrefslogtreecommitdiffstats
path: root/abs/core-testing
diff options
context:
space:
mode:
Diffstat (limited to 'abs/core-testing')
-rw-r--r--abs/core-testing/linhes-scripts/PKGBUILD3
-rwxr-xr-xabs/core-testing/linhes-scripts/src/770-wrapper.sh37
-rwxr-xr-xabs/core-testing/linhes-scripts/src/idle.sh102
-rwxr-xr-xabs/core-testing/linhes-scripts/src/importfiles.sh18
-rwxr-xr-xabs/core-testing/linhes-scripts/src/limit-mythcommflag.sh54
-rw-r--r--abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2bin0 -> 14933 bytes
-rwxr-xr-xabs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl204
-rwxr-xr-xabs/core-testing/linhes-scripts/src/mplayer-resumer.pl188
-rwxr-xr-xabs/core-testing/linhes-scripts/src/myth2mp382
-rwxr-xr-xabs/core-testing/linhes-scripts/src/myth2x264223
-rwxr-xr-xabs/core-testing/linhes-scripts/src/myth2xvid223
-rwxr-xr-xabs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh23
-rwxr-xr-xabs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh16
-rwxr-xr-xabs/core-testing/linhes-scripts/src/pause-mythcommflag.sh53
-rwxr-xr-xabs/core-testing/linhes-scripts/src/pause_mythcommflag7
-rwxr-xr-xabs/core-testing/linhes-scripts/src/run-limit-mythcommflag2
-rwxr-xr-xabs/core-testing/linhes-scripts/src/run-pause-mythcommflag2
-rwxr-xr-xabs/core-testing/linhes-scripts/src/screenshooter.sh225
-rwxr-xr-xabs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh11
-rwxr-xr-xabs/core-testing/linhes-scripts/src/shootscreens.sh37
-rwxr-xr-xabs/core-testing/linhes-scripts/src/vdpau-detector103
-rw-r--r--abs/core-testing/tweaker/PKGBUILD2
-rwxr-xr-xabs/core-testing/tweaker/bin/twk_general.pl19
23 files changed, 1623 insertions, 11 deletions
diff --git a/abs/core-testing/linhes-scripts/PKGBUILD b/abs/core-testing/linhes-scripts/PKGBUILD
index 98a133c..01f4291 100644
--- a/abs/core-testing/linhes-scripts/PKGBUILD
+++ b/abs/core-testing/linhes-scripts/PKGBUILD
@@ -3,13 +3,12 @@
pkgname=linhes-scripts
pkgver=1
-pkgrel=17
+pkgrel=18
pkgdesc="Various scripts that help to make LinHES, LinHES."
arch=('i686' 'x86_64')
license=('GPL2')
depends=('xosd' 'cpulimit')
url="http://linhes.org/"
-source=(ftp://ftp.knoppmyth.net/R6/sources/linhes-scripts.tar.bz2)
build() {
cd $startdir/src/
diff --git a/abs/core-testing/linhes-scripts/src/770-wrapper.sh b/abs/core-testing/linhes-scripts/src/770-wrapper.sh
new file mode 100755
index 0000000..65573f4
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/770-wrapper.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+# 770-wrapper.sh by Cecil Watsona
+# Modifed from
+# pdatranscode
+#
+# created by Jeff Volckaert (inspired by Zach White)
+# modified 01/16/06
+VIDEODIR=$1
+FILENAME=$2
+TITLE=$3
+# Remove non-alpha characters from TITLE
+TITLE=${TITLE//[^a-zA-Z0-9]/}
+STARTTIME=$4
+DIROUT=/myth/n770
+
+# Sanity checking, to make sure everything is in order.
+if [ -z "$VIDEODIR" -o -z "$FILENAME" ]; then
+ echo "Usage: $0 <VideoDirectory> <FileName> "<Title>" <Starttime>"
+ exit 5
+fi
+if [ ! -f $VIDEODIR/$FILENAME ]; then
+ echo "File does not exist: $VIDEODIR/$FILENAME"
+ exit 6
+fi
+
+# Transcode the file
+
+
+perl /usr/local/bin/770-encode.pl -q -p mplayer $VIDEODIR/$FILENAME $DIROUT/$TITLE-$STARTTIME.avi
+
+chmod 664 $DIROUT/$TITLE-$STARTTIME.avi
+
+ERROR=$?
+if [ $ERROR -ne 0 ]; then
+ echo "Transcoding failed for ${FILENAME} with error $ERROR"
+ exit 3
+fi
diff --git a/abs/core-testing/linhes-scripts/src/idle.sh b/abs/core-testing/linhes-scripts/src/idle.sh
new file mode 100755
index 0000000..f95b9fa
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/idle.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+
+usage () {
+ echo "Usage: $0 [-h] [-s] [-t <minutes_needed>]"
+ echo
+ echo "-h - Print this help/usage message and quit"
+ echo "-s - Run silently (default is verbose)"
+ echo "-t - Minutes of idle time needed (default is 20)"
+ echo "-v - Be more verbose for debugging"
+ echo
+ echo "Silent mode is recommended for use in cron jobs or scripts."
+ exit $1
+}
+
+msg () { # A status reporting function
+ [ "$VERBOSE" -ne 0 ] && echo "$*"
+}
+
+mysql_cmd () {
+ /usr/bin/mysql -u root mythconverg -sBe "$*"
+}
+
+# Command line argument handling
+VERBOSE=1
+TIME_BEFORE=20
+TIME_AFTER=5 # Only adjustable by editing here
+
+while getopts "hst:v" OPT ; do
+ case $OPT in
+ h) usage 0 ;;
+ s) VERBOSE=0 ;;
+ t) TIME_BEFORE=$OPTARG ;;
+ v) VERBOSE=2 ;;
+ *) usage 1 ;;
+ esac
+done
+# Check for extra cruft on the command line...
+shift $(($OPTIND - 1))
+[ -n "$*" ] && usage 1
+
+msg "Checking what MythTV is doing now or plans within $TIME_BEFORE minutes..."
+msg
+
+/usr/bin/mythshutdown -s 1
+BUSY="$?"
+msg "mythshutdown returned $BUSY"
+# Ignore certain non-zero flag values
+BUSY=$(($BUSY & 0x2F))
+
+SCHEMALOCK=$(mysql_cmd "select count(*) from schemalock")
+msg "schemalock $SCHEMALOCK"
+
+JOBS=$(mysql_cmd "select count(*) from jobqueue where status = 4")
+msg "running jobs $JOBS"
+
+INUSE=$(mysql_cmd "select count(*) from inuseprograms")
+msg "inuse programs $INUSE"
+
+POTENTIAL=$(mysql_cmd "select count(*) from recordmatch as rm, program as p
+ where rm.chanid = p.chanid and rm.starttime = p.starttime
+ and rm.starttime < now() + interval $TIME_BEFORE minute
+ and now() < p.endtime + interval $TIME_AFTER minute")
+msg "potential recordings $POTENTIAL"
+# See if any of the potential upcoming recordings are real.
+# This is ugly, but only the backend knows what programs it really
+# plans to record or ignore, so we can't just check the DB. :-(
+if [ "$VERBOSE" -ge 2 ] ; then
+ mysql_cmd "select p.starttime, p.endtime, p.title, subtitle
+ from recordmatch as rm, program as p
+ where rm.chanid = p.chanid and rm.starttime = p.starttime
+ and rm.starttime < now() + interval $TIME_BEFORE minute
+ and now() < p.endtime + interval $TIME_AFTER minute
+ order by p.starttime, p.endtime"
+fi
+UPCOMING=$(/usr/bin/mythbackend --printsched 2>&1 |
+ /bin/awk -v potential=$POTENTIAL '
+ BEGIN {item=-1;real=0}
+ /--- print list start ---/,/--- print list end ---/ {
+ if (item>0 && item<=potential && substr($0,70,1) ~ "[0-9]") real+=1;
+ item += 1;
+ }
+ END {print real}
+')
+msg "planned recordings $UPCOMING"
+if [ "$VERBOSE" -ge 2 ] ; then
+ /usr/bin/mythbackend --printsched 2>&1 |
+ /bin/awk -v potential=$POTENTIAL '
+ BEGIN {item=-1}
+ /--- print list start ---/,/--- print list end ---/ {
+ if (item>0 && item<=potential) print $0;
+ item += 1;
+ }'
+fi
+activities=$(($BUSY + $SCHEMALOCK + $JOBS + $INUSE + $UPCOMING))
+msg
+if [ "$activities" -eq 0 ] ; then
+ msg "System is idle"
+ exit 0
+else
+ msg "System is busy"
+ exit 1
+fi
diff --git a/abs/core-testing/linhes-scripts/src/importfiles.sh b/abs/core-testing/linhes-scripts/src/importfiles.sh
new file mode 100755
index 0000000..84f1ab5
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/importfiles.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
+
+DVD_or_CD=`cat /proc/mounts |grep iso9660|awk '{print $2}'|tail -1`
+if [ "$DVD_or_CD" != "" ]; then
+ echo "Copying files from $DVD_or_CD to /myth/video." > /tmp/screens
+ echo "This could take several minutes, depending on the" >> /tmp/screens
+ echo "speed and size of your optical media." >> /tmp/screens
+ cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=0 &
+ /bin/cp -R $DVD_or_CD/* /myth/video/
+ killall osd_cat
+ echo "Copied videos from $DVD_or_CD to /myth/video" > /tmp/screens
+ cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=2 &
+else
+ echo "No optical media found. If you just inserted" > /tmp/screens
+ echo "your media, please wait a moment and try again." >> /tmp/screens
+ cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=5 &
+fi
diff --git a/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh b/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh
new file mode 100755
index 0000000..8ca61c7
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# limit-mythcommflag.sh v0.1 05/17/09
+# Utility to automatically limit mythcommflag if CPU usage is above a certain level.
+# Uses cpulimit from http://cpulimit.sourceforge.net/
+# Free for any use.
+# Installation:
+# cp limit-mythcommflag.sh /usr/LH/bin
+# chmod +x /usr/LH/bin/limit-mythcommflag.sh
+# Usage: Executed from runit limit-mythcommflag at boot
+
+# Threshold for when mythcommflag will be paused
+CPUTHRESHOLD=43
+
+# Limit mythcommflag to percentage
+LIMITCPU=20
+
+# Log file to write (use /dev/null for no log)
+#LOG=/var/log/mythtv/limit-mythcommflag.log
+LOG=/dev/null
+
+# Number of seconds to wait between checking for mythcommflag process
+SLEEP=5
+
+#sleep $SLEEP
+
+touch $LOG
+
+ALREADYLIMITED=0
+
+while true; do
+ PROCCOMMFLAG=`pidof mythcommflag`
+ if [ -n "${PROCCOMMFLAG}" ]
+ then
+ FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'`
+ if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD" ]
+ then
+ echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD%, LIMIT Commflagging" # >> $LOG
+ if [ $ALREADYLIMITED -eq 0 ]; then
+ cpulimit -e mythcommflag -l $LIMITCPU &
+ cpulimit_pid=$!
+ ALREADYLIMITED=1
+ fi
+ else
+ echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD%, UNLIMIT Commflagging" #>> $LOG
+ if [ $ALREADYLIMITED -eq 1 ]; then
+ kill $cpulimit_pid
+ ALREADYLIMITED=0
+ fi
+ fi
+# else
+# echo "No COMMFLAG Process Active" >> $LOG
+ fi
+ sleep $SLEEP
+done
diff --git a/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2 b/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2
new file mode 100644
index 0000000..d9bd8e7
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2
Binary files differ
diff --git a/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl b/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl
new file mode 100755
index 0000000..9c82158
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl
@@ -0,0 +1,204 @@
+#!/usr/bin/perl
+
+use Shell;
+use strict;
+use POSIX qw(floor);
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# CHANGE LOG:
+# 3/9/2009
+# Modded Bob's wonderful resumer script to work with the vdpau
+# options detector script someone anonymously posted to the wiki
+#
+# http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo
+#
+# You need to have both this and the vdpau-detector script in the same
+# dir for this to work properly. Also, change your default mplayer
+# options in mythfrontend to read simply: # mplayer-resumer-vdpau.pl %s
+#
+# To tweak the shell commands for mplayer, edit the vdpau-detector script.
+# It has a small README inside it as comments
+# ENJOY!
+
+# 5/3/2006
+# Added last time started checking.
+# If this script is restarted within $tdiff (default 5 seconds)
+# then it will delete the file used to keep track of the videos
+# resume position.
+
+# PURPOSE:
+# --------------------------
+# This is a wrapper script to prove the concept of having MythTV
+# resume playback of previously-stopped video where you left off.
+# It's likely that a good solution will look different than this
+# initial code.
+
+# RATIONALE:
+# --------------------------
+# Watching 90% of a video and stopping causes you to return to the
+# beginning again the next time you watch it. Remembering where
+# you were in the video and resuming at that position is a much nicer
+# behavior for the user.
+#
+# By default, mplayer spits out timecode information that tells you
+# where you are in the video, to the tenth of a second. Mplayer also
+# supports a seek feature on the command-line. We can make use of these
+# features to write an mplayer wrapper that will remember the last
+# position in a video file and resume to it on playback.
+
+# PARAMETERS:
+# --------------------------
+# see print_usage() below
+
+# FILES:
+# --------------------------
+# $infile, the video to play
+# $resumefile, the video's resume file (see get_resume_filename() below)
+
+# KNOWN ISSUES:
+# --------------------------
+# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything
+# captured via an HDTV tuner card and put into your /myth/video directory
+# will fail with this resumer.
+#
+# Current theories include the timecode having to do with the show's broadcast
+# time, recording time, or perhaps its upload time to the station that
+# broadcast it.
+
+# DESIGN LIMITATION:
+# -------------------------
+# If the video file to be played is on a read-only filesystem, or otherwise
+# lives in a location that cannot be written to, resume will fail. This is
+# because the current implementation uses a file parallel to the video file
+# to store the timecode.
+#
+
+my $infile;
+my $resumefile;
+my $mplayer_parameters;
+my $fudge_factor=2; # number of additional seconds to skip back before playback
+my $tnow; # Time now.
+my $tprev; # Time the prog was last started.
+ # Returned from the modification time of the xx.resume file.
+my $tdiff=5; # How many seconds before we should start from
+ # the beginning of the movie
+#DEBUG
+#open(DEBUG,">/tmp/debug") || die "unable to open debug file";
+
+sub init () {
+ $tnow = time();
+ $infile = @ARGV[$#ARGV];
+
+ $resumefile = &get_resume_filename($infile);
+ # This returns the 9th element of the 13 element array
+ # created by the stat function.
+ $tprev = (stat ($resumefile))[9];
+ # if this file is restarted in less than 5 seconds then
+ # remove the .resume file
+ if ( ($tnow - $tprev) < $tdiff ) {
+ unlink($resumefile);
+ }
+
+ $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]);
+}
+
+&init();
+&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile);
+
+#close(DEBUG);
+
+# For $pathname, return $path.$filename.resume
+sub get_resume_filename () {
+ my($pathname)=@_;
+
+ my $idx = rindex($pathname,"/");
+
+ if ($idx == -1) { # There was no "/" in $pathname
+ return ".".$pathname.".resume";
+ } else {
+ # Now we need to split out the path from the filename.
+ my $path = substr($pathname,0,$idx+1);
+ my $filename = substr($pathname,$idx+1);
+ return "$path.$filename.resume";
+ }
+}
+
+# Calls mplayer and returns the last known video position
+sub mplayer () {
+ my($parameters,$infile)=@_;
+ my $seconds=0;
+ my $timecode=&get_time_offset($infile);
+ my $mplayeropts=`./vdpau-detector $infile`; chomp $mplayeropts;
+ my @lines = split "\n", $mplayeropts;
+ my $last_line = pop(@lines);
+ my $command = "mplayer $last_line $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |";
+
+ open(SHELL, $command);
+ # The kind of line we care about looks like this example:
+ # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68%
+ # But all we care to look at is the first number.
+
+ while (<SHELL>) {
+ #print DEBUG $_;
+ if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it
+ my $last_timecode_line = &extract_last_timecode_line($_);
+ if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) {
+ $seconds=$1;
+ }
+ }
+ }
+ close(SHELL);
+
+ return $seconds;
+
+ sub extract_last_timecode_line () {
+ my ($line)=@_;
+ my @lines=split('A:',$line);
+ return @lines[$#lines-1];
+ }
+}
+
+# Save the last known video position
+sub save_time_offset () {
+ my($seconds, $resumefile)=@_;
+
+ open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing";
+ print RESUMEFILE "$seconds";
+ close(RESUMEFILE);
+}
+
+# returns the number of seconds corresponding to the last known video position,
+# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer
+sub get_time_offset () {
+ my($videofile)=@_;
+ my($resumefile) = &get_resume_filename($videofile);
+ my $seconds=0;
+ my $timecode;
+
+ open(RESUMEFILE, "<$resumefile") || return "00:00:00";
+ while(<RESUMEFILE>) {
+ $seconds=$_;
+ }
+ close(RESUMEFILE);
+
+ my $hours = floor($seconds/3600);
+ $seconds = $seconds - $hours*3600;
+
+ my $minutes = floor($seconds/60);
+ $seconds = int($seconds - $minutes*60) - $fudge_factor;
+
+ $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds;
+# print "TIMECODE: $timecode\n";
+ return $timecode;
+}
+
+sub print_usage () {
+ print "USAGE:\n";
+ print "\t",$ARGV[0], "[mplayer parameters] video_file\n";
+ print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n";
+ print "\t","Version 3/9/2009\n";
+}
diff --git a/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl b/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl
new file mode 100755
index 0000000..c785a25
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl
@@ -0,0 +1,188 @@
+#!/usr/bin/perl
+
+use Shell;
+use strict;
+use POSIX qw(floor);
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# PURPOSE:
+# --------------------------
+# This is a wrapper script to prove the concept of having MythTV
+# resume playback of previously-stopped video where you left off.
+# It's likely that a good solution will look different than this
+# initial code.
+
+# RATIONALE:
+# --------------------------
+# Watching 90% of a video and stopping causes you to return to the
+# beginning again the next time you watch it. Remembering where
+# you were in the video and resuming at that position is a much nicer
+# behavior for the user.
+#
+# By default, mplayer spits out timecode information that tells you
+# where you are in the video, to the tenth of a second. Mplayer also
+# supports a seek feature on the command-line. We can make use of these
+# features to write an mplayer wrapper that will remember the last
+# position in a video file and resume to it on playback.
+
+# PARAMETERS:
+# --------------------------
+# see print_usage() below
+
+# FILES:
+# --------------------------
+# $infile, the video to play
+# $resumefile, the video's resume file (see get_resume_filename() below)
+
+# KNOWN ISSUES:
+# --------------------------
+# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything
+# captured via an HDTV tuner card and put into your /myth/video directory
+# will fail with this resumer.
+#
+# Current theories include the timecode having to do with the show's broadcast
+# time, recording time, or perhaps its upload time to the station that
+# broadcast it.
+
+# DESIGN LIMITATION:
+# -------------------------
+# If the video file to be played is on a read-only filesystem, or otherwise
+# lives in a location that cannot be written to, resume will fail. This is
+# because the current implementation uses a file parallel to the video file
+# to store the timecode.
+#
+
+# CHANGE LOG:
+# 5/3/2006
+# Added last time started checking.
+# If this script is restarted within $tdiff (default 5 seconds)
+# then it will delete the file used to keep track of the videos
+# resume position.
+
+
+my $infile;
+my $resumefile;
+my $mplayer_parameters;
+my $fudge_factor=2; # number of additional seconds to skip back before playback
+my $tnow; # Time now.
+my $tprev; # Time the prog was last started.
+ # Returned from the modification time of the xx.resume file.
+my $tdiff=5; # How many seconds before we should start from
+ # the beginning of the movie
+#DEBUG
+#open(DEBUG,">/tmp/debug") || die "unable to open debug file";
+
+sub init () {
+ $tnow = time();
+ $infile = @ARGV[$#ARGV];
+
+ $resumefile = &get_resume_filename($infile);
+ # This returns the 9th element of the 13 element array
+ # created by the stat function.
+ $tprev = (stat ($resumefile))[9];
+ # if this file is restarted in less than 5 seconds then
+ # remove the .resume file
+ if ( ($tnow - $tprev) < $tdiff ) {
+ unlink($resumefile);
+ }
+
+ $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]);
+}
+
+&init();
+&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile);
+
+#close(DEBUG);
+
+# For $pathname, return $path.$filename.resume
+sub get_resume_filename () {
+ my($pathname)=@_;
+
+ my $idx = rindex($pathname,"/");
+
+ if ($idx == -1) { # There was no "/" in $pathname
+ return ".".$pathname.".resume";
+ } else {
+ # Now we need to split out the path from the filename.
+ my $path = substr($pathname,0,$idx+1);
+ my $filename = substr($pathname,$idx+1);
+ return "$path.$filename.resume";
+ }
+}
+
+# Calls mplayer and returns the last known video position
+sub mplayer () {
+ my($parameters,$infile)=@_;
+ my $seconds=0;
+ my $timecode=&get_time_offset($infile);
+ my $command = "mplayer $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |";
+
+ open(SHELL, $command);
+ # The kind of line we care about looks like this example:
+ # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68%
+ # But all we care to look at is the first number.
+
+ while (<SHELL>) {
+ #print DEBUG $_;
+ if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it
+ my $last_timecode_line = &extract_last_timecode_line($_);
+ if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) {
+ $seconds=$1;
+ }
+ }
+ }
+ close(SHELL);
+
+ return $seconds;
+
+ sub extract_last_timecode_line () {
+ my ($line)=@_;
+ my @lines=split('A:',$line);
+ return @lines[$#lines-1];
+ }
+}
+
+# Save the last known video position
+sub save_time_offset () {
+ my($seconds, $resumefile)=@_;
+
+ open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing";
+ print RESUMEFILE "$seconds";
+ close(RESUMEFILE);
+}
+
+# returns the number of seconds corresponding to the last known video position,
+# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer
+sub get_time_offset () {
+ my($videofile)=@_;
+ my($resumefile) = &get_resume_filename($videofile);
+ my $seconds=0;
+ my $timecode;
+
+ open(RESUMEFILE, "<$resumefile") || return "00:00:00";
+ while(<RESUMEFILE>) {
+ $seconds=$_;
+ }
+ close(RESUMEFILE);
+
+ my $hours = floor($seconds/3600);
+ $seconds = $seconds - $hours*3600;
+
+ my $minutes = floor($seconds/60);
+ $seconds = int($seconds - $minutes*60) - $fudge_factor;
+
+ $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds;
+# print "TIMECODE: $timecode\n";
+ return $timecode;
+}
+
+sub print_usage () {
+ print "USAGE:\n";
+ print "\t",$ARGV[0], "[mplayer parameters] video_file\n";
+ print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n";
+ print "\t","Version 5/3/2006\n";
+}
diff --git a/abs/core-testing/linhes-scripts/src/myth2mp3 b/abs/core-testing/linhes-scripts/src/myth2mp3
new file mode 100755
index 0000000..89181c1
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2mp3
@@ -0,0 +1,82 @@
+#!/bin/sh
+# convert recordings to as mp3 audio only
+# version 0.9
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# In the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2mp3 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%"
+
+# options:
+BITRATE=256k #ie. 128k, 160k, 192k, 224k, 256k
+USECUTLIST=Y #Y or N
+
+# where the converted audio is stored
+OUT_DIR=/myth/music
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toMP3-$$
+TMPFILE=/myth/tmp/$TMPNAME.mp3
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+FFINPUTFILE=$1
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2mp3.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $1 Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+# check if using cutlist
+if [ $USECUTLIST = Y ];then
+ MYTHCOMMFRAMES=`mythcommflag --getcutlist -f "$FFINPUTFILE" | grep 'Cutlist:' | cut -d \ -f 2`
+ if [ -n "$MYTHCOMMFRAMES" ]; then
+ echo "Extracting Cutlist..." >> $LOGFILE
+ /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+ FFINPUTFILE=$TMPCUTFILE
+ fi
+fi
+
+# run ffmpeg to do conversion
+echo "Encoding..." >> $LOGFILE
+/usr/bin/nice -n19 /usr/bin/ffmpeg -i "$FFINPUTFILE" -vn -acodec libmp3lame -ab $BITRATE -ar 44100 -ac 2 "$TMPFILE"
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.mp3
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+ OUTPUTFILE=$OUT_DIR/$2-$i.mp3
+ i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+ echo "File Encoded Sucessfully: $OUTPUTFILE" >> $LOGFILE
+ hours=$((seconds / 3600))
+ seconds=$((seconds % 3600))
+ minutes=$((seconds / 60))
+ seconds=$((seconds % 60))
+ echo "Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" >> $LOGFILE
+else
+ echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+# clean up left over files
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
diff --git a/abs/core-testing/linhes-scripts/src/myth2x264 b/abs/core-testing/linhes-scripts/src/myth2x264
new file mode 100755
index 0000000..014fcbe
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2x264
@@ -0,0 +1,223 @@
+#!/bin/sh
+# convert recording to x264 encoded avi
+# version 0.6
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV
+# in the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2x264 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%"
+
+# options:
+RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544)
+BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000)
+USECUTLIST=Y # Y or N
+
+# where the converted video is stored
+OUT_DIR=/myth/video
+
+# database settings
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e"
+
+#------FUNCTIONS---------------
+update_comment()
+# Arg_1 = COMMENT
+{
+if [ $NO_JOBID = 0 ]; then
+ `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+update_status()
+# Arg_1 = status code
+{
+if [ $NO_JOBID = 0 ]; then
+ `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+check_background_progress()
+# check mencoder progress in background
+# Arg_1 = PROGRESS CALCULATION
+{
+while [ `tail -1 $STATUSFILE | grep -c "^x264 \[info\]: kb/s:"` = 0 ]
+do
+ sleep 10
+ check_myth_jobcmds
+ current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"`
+ prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'`
+ current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'`
+ if [ -n "$prog_percent" ]; then
+ prog_percent=`expr $prog_percent / $1`
+ echo "$prog_percent% Completed @ $current_FPS fps"
+ update_comment "$prog_percent% Completed @ $current_FPS fps"
+ fi
+ sleep 10
+done
+}
+
+check_myth_jobcmds()
+# check the myth database for stop pause or resume commands
+{
+if [ $NO_JOBID = 0 ]; then
+ CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'`
+ case "$CURRENT_CMD" in
+ # JOB_RUN
+ 0) ;;
+ # JOB_PAUSE
+ 1) update_status 6
+ kill -s STOP $mencoder_pid ;;
+ # JOB_RESUME
+ 2) update_status 4
+ `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+ kill -s CONT $mencoder_pid ;;
+ # JOB_STOP
+ 4) update_status 5
+ `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+ kill -9 $mencoder_pid $command_pid
+ clean_up_files
+ echo "Encode Cancelled" >> $LOGFILE
+ update_status 320
+ exit ;;
+ esac
+fi
+}
+
+get_mencoder_pid()
+{
+process_name=""
+i1=1
+while [ "$process_name" != "found" ]; do
+ if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then
+ process_name="found"
+ else
+ mencoder_pid=`expr $mencoder_pid + 1`
+ fi
+ i1=`expr $i1 + 1`
+ if [ $i1 -gt 20 ]; then
+ break
+ fi
+done
+}
+
+clean_up_files()
+# clean up left over files
+{
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
+unlink $TWOPASSFILE 2> /dev/null
+unlink $TWOPASSFILE.tmp 2> /dev/null
+unlink $STATUSFILE 2> /dev/null
+unlink $MENCODER_RETURN_CODE 2> /dev/null
+unlink $MENCODER_RETURN_CODE_2 2> /dev/null
+}
+
+#-------MAIN SCRIPT------------
+
+# check if %JOBID% is passed from command line
+JOBID=$5
+if [ -z "$JOBID" ]; then
+ NO_JOBID=1
+else
+ NO_JOBID=0
+fi
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toX264-$$
+TMPFILE=/myth/tmp/$TMPNAME.avi
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+MENINPUTFILE=$1
+TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log
+STATUSFILE=/myth/tmp/$TMPNAME-status.log
+MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code
+MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2x264.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+check_myth_jobcmds
+
+# check if using cutlist
+if [ $USECUTLIST = Y ]; then
+ MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2`
+ if [ -n "$MYTHCOMMFRAMES" ]; then
+ echo "Extracting Cutlist..." >> $LOGFILE
+ update_comment "Extracting Cutlist"
+ /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+ MENINPUTFILE=$TMPCUTFILE
+ fi
+fi
+
+# run mencoder in background to do 1st pass conversion
+echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \
+-x264encopts threads=auto:pass=1:turbo=1:subq=1:frameref=1:bframes=3:bitrate=$BITRATE \
+-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2"
+
+# run mencoder in background to do 2nd pass conversion
+echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \
+-x264encopts threads=auto:pass=2:subq=5:8x8dct:frameref=3:bframes=3:b_pyramid:weight_b:bitrate=$BITRATE \
+-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2 + 50"
+
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.avi
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+ OUTPUTFILE=$OUT_DIR/$2-$i.avi
+ i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+ echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE
+ hours=$((seconds / 3600))
+ seconds=$((seconds % 3600))
+ minutes=$((seconds / 60))
+ seconds=$((seconds % 60))
+ echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE
+ update_status 272
+ update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)"
+else
+ update_status 304
+ update_comment "Encode Failed. Exit status: $ERROR"
+ echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+clean_up_files
diff --git a/abs/core-testing/linhes-scripts/src/myth2xvid b/abs/core-testing/linhes-scripts/src/myth2xvid
new file mode 100755
index 0000000..d0fcb42
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2xvid
@@ -0,0 +1,223 @@
+#!/bin/sh
+# convert recording to xvid encoded avi
+# version 1.3
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV
+# in the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2xvid "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%"
+
+# options:
+RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544)
+BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000)
+USECUTLIST=Y # Y or N
+
+# where the converted video is stored
+OUT_DIR=/myth/video
+
+# database settings
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e"
+
+#------FUNCTIONS---------------
+update_comment()
+# Arg_1 = COMMENT
+{
+if [ $NO_JOBID = 0 ]; then
+ `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+update_status()
+# Arg_1 = status code
+{
+if [ $NO_JOBID = 0 ]; then
+ `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+check_background_progress()
+# check mencoder progress in background
+# Arg_1 = PROGRESS CALCULATION
+{
+while [ `tail -1 $STATUSFILE | grep -c "^Audio stream:"` = 0 ]
+do
+ sleep 10
+ check_myth_jobcmds
+ current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"`
+ prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'`
+ current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'`
+ if [ -n "$prog_percent" ]; then
+ prog_percent=`expr $prog_percent / $1`
+ echo "$prog_percent% Completed @ $current_FPS fps"
+ update_comment "$prog_percent% Completed @ $current_FPS fps"
+ fi
+ sleep 10
+done
+}
+
+check_myth_jobcmds()
+# check the myth database for stop pause or resume commands
+{
+if [ $NO_JOBID = 0 ]; then
+ CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'`
+ case "$CURRENT_CMD" in
+ # JOB_RUN
+ 0) ;;
+ # JOB_PAUSE
+ 1) update_status 6
+ kill -s STOP $mencoder_pid ;;
+ # JOB_RESUME
+ 2) update_status 4
+ `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+ kill -s CONT $mencoder_pid ;;
+ # JOB_STOP
+ 4) update_status 5
+ `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+ kill -9 $mencoder_pid $command_pid
+ clean_up_files
+ echo "Encode Cancelled" >> $LOGFILE
+ update_status 320
+ exit ;;
+ esac
+fi
+}
+
+get_mencoder_pid()
+{
+process_name=""
+i1=1
+while [ "$process_name" != "found" ]; do
+ if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then
+ process_name="found"
+ else
+ mencoder_pid=`expr $mencoder_pid + 1`
+ fi
+ i1=`expr $i1 + 1`
+ if [ $i1 -gt 20 ]; then
+ break
+ fi
+done
+}
+
+clean_up_files()
+# clean up left over files
+{
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
+unlink $TWOPASSFILE 2> /dev/null
+unlink $TWOPASSFILE.tmp 2> /dev/null
+unlink $STATUSFILE 2> /dev/null
+unlink $MENCODER_RETURN_CODE 2> /dev/null
+unlink $MENCODER_RETURN_CODE_2 2> /dev/null
+}
+
+#-------MAIN SCRIPT------------
+
+# check if %JOBID% is passed from command line
+JOBID=$5
+if [ -z "$JOBID" ]; then
+ NO_JOBID=1
+else
+ NO_JOBID=0
+fi
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toXVID-$$
+TMPFILE=/myth/tmp/$TMPNAME.avi
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+MENINPUTFILE=$1
+TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log
+STATUSFILE=/myth/tmp/$TMPNAME-status.log
+MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code
+MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2xvid.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+check_myth_jobcmds
+
+# check if using cutlist
+if [ $USECUTLIST = Y ]; then
+ MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2`
+ if [ -n "$MYTHCOMMFRAMES" ]; then
+ echo "Extracting Cutlist..." >> $LOGFILE
+ update_comment "Extracting Cutlist"
+ /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+ MENINPUTFILE=$TMPCUTFILE
+ fi
+fi
+
+# run mencoder in background to do 1st pass conversion
+echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \
+-xvidencopts pass=1:vhq=0:turbo:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \
+-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2"
+
+# run mencoder in background to do 2nd pass conversion
+echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \
+-xvidencopts pass=2:vhq=0:bvhq=1:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \
+-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2 + 50"
+
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.avi
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+ OUTPUTFILE=$OUT_DIR/$2-$i.avi
+ i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+ echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE
+ hours=$((seconds / 3600))
+ seconds=$((seconds % 3600))
+ minutes=$((seconds / 60))
+ seconds=$((seconds % 60))
+ echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE
+ update_status 272
+ update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)"
+else
+ update_status 304
+ update_comment "Encode Failed. Exit status: $ERROR"
+ echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+clean_up_files \ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh b/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh
new file mode 100755
index 0000000..6dbd39e
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+#$1 is the first argument to the script. It is the time in seconds since 1970
+#This is defined in mythwelcome with the time_t argument
+
+# Configure mythwelcome --setup page:
+# Command to Set Wakeup Time: sudo sh -c "/usr/LH/bin/mythwelcome-set-alarm.sh $time"
+# Wakeup Time Format: time_t
+# nvram-wakeup Restart Command: Leave this blank
+# Command to reboot: sudo /sbin/reboot
+# Command to shutdown: sudo /sbin/poweroff
+# Command to run Xterm: xterm
+# Command to start the Frontend: /usr/bin/mythfrontend -l /var/log/mythtv/mythfrontend.log
+
+# Configure mythtv-setup Shutdown/Wakeup Options page:
+# Idletimeout (secs): any value greater that 0
+# Wakeup time format: yyyy-MM-dd:hh:mm
+# Set wakeup time command: /usr/bin/mythshutdown --setwakeup $time
+# Server Halt command: /usr/bin/mythshutdown --shutdown
+# Pre shutdown check command: /usr/bin/mythshutdown --check
+
+echo 0 > /sys/class/rtc/rtc0/wakealarm #this clears your alarm
+echo $1 > /sys/class/rtc/rtc0/wakealarm #this writes your alarm
+cat /proc/driver/rtc > /var/log/wake_alarm
diff --git a/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh b/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh
new file mode 100755
index 0000000..4aadf6d
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm" #this clears your alarm
+sudo sh -c "echo `date '+%s' -d '+ 4 minutes'` > /sys/class/rtc/rtc0/wakealarm" #this writes your alarm
+cat /proc/driver/rtc
+cat /proc/driver/rtc > /var/log/wake_alarm
+echo "Your computer is set to start up in 4 minutes using ACPI."
+echo -n "Do you want to shutdown the computer now? (y/n): "
+read -n 1 shutdown
+if [ "$shutdown" == "y" ]; then
+ echo -e "\nShutting down now..."
+ sudo shutdown -t 5 -h now
+else
+ echo -e "\nTo shutdown execute the following:"
+ echo " sudo shutdown -t 5 -h now"
+fi
diff --git a/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh b/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh
new file mode 100755
index 0000000..4da808b
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+# pause-mythcommflag.sh v0.2 05/21/09
+# Utility to automatically pause & unpause mythcommflag if CPU usage is above a certain level
+# Free for any use.
+# Installation:
+# cp pause-mythcommflag.sh /usr/LH/bin
+# chmod +x /usr/LH/bin/pause-mythcommflag.sh
+# Usage: Executed from sv start pause-mythcommflag
+
+# Threshold for when mythcommflag will be paused
+CPUTHRESHOLD=75
+
+# Second Threshold for when mythcommflag is already paused
+PAUSEDCPUTHRESHOLD=45
+
+# Log file to write (change to /dev/null for no log)
+LOG=/var/log/mythtv/pause-mythcommflag.log
+
+# Number of seconds to wait between checking for mythcommflag process
+SLEEP=5
+
+#sleep $SLEEP
+
+touch $LOG
+
+COMMFLAGSTATE=1
+
+while true; do
+ PROCCOMMFLAG=`pidof mythcommflag`
+ if [ -n "${PROCCOMMFLAG}" ]
+ then
+ FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'`
+ if [ $COMMFLAGSTATE -eq 1 ]
+ then
+ CPUTHRESHOLD1=$CPUTHRESHOLD
+ else
+ CPUTHRESHOLD1=$PAUSEDCPUTHRESHOLD
+ fi
+ if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD1" ]
+ then
+# echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD1%, PAUSE Commflagging" >> $LOG
+ kill -s STOP $PROCCOMMFLAG
+ COMMFLAGSTATE=0
+ else
+# echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD1%, CONTINUE Commflagging" >> $LOG
+ kill -s CONT $PROCCOMMFLAG
+ COMMFLAGSTATE=1
+ fi
+# else
+# echo "No COMMFLAG Process Active" >> $LOG
+ fi
+ sleep $SLEEP
+done
diff --git a/abs/core-testing/linhes-scripts/src/pause_mythcommflag b/abs/core-testing/linhes-scripts/src/pause_mythcommflag
new file mode 100755
index 0000000..da9e659
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/pause_mythcommflag
@@ -0,0 +1,7 @@
+/var/log/mythtv/pause-mythcommflag.log {
+ daily
+ rotate 7
+ notifempty
+ copytruncate
+ compress
+}
diff --git a/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag b/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag
new file mode 100755
index 0000000..38ca45f
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec /usr/bin/nice -19 /usr/LH/bin/limit-mythcommflag.sh
diff --git a/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag b/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag
new file mode 100755
index 0000000..8bd25ac
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec /usr/bin/nice -19 /usr/LH/bin/pause-mythcommflag.sh
diff --git a/abs/core-testing/linhes-scripts/src/screenshooter.sh b/abs/core-testing/linhes-scripts/src/screenshooter.sh
new file mode 100755
index 0000000..9e35786
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/screenshooter.sh
@@ -0,0 +1,225 @@
+#!/bin/bash
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# with contributions from TJC and Sarah Hayes
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# This is alpha code to auto-generate thumbnails for previews in MythVideo.
+# It won't currently work on some filenames that have spaces in them.
+# It's surely just a matter of escaping or quoting, but I have yet to find
+# the right incantation.
+
+# example usage:
+# find -L /myth/video -wholename '*.covers' -prune -o -name '*.resume' -o -type f -exec screenshooter.sh -v {} \;
+
+# limitations:
+# --
+# In an MBE/SBE/FE setup this might get the settings for the wrong machine...
+# The script has no AI to know if a grabbed frame is useful to identify the video, only that it was able to grab it.
+# Doesn't clean up after itself if videos are deleted, though MythTV may do this on its own.
+# Minimum theoretical compatible video length is 4 seconds. Shorter videos will not work with this version.
+# Surely more limitations I can't think of because it's my baby :)
+
+Usage() {
+ echo "USAGE:"
+ echo `basename $0` "-v PATHNAME [-s SECONDS] [-c] [-b HOSTNAME] [-u USERNAME] [-p PASSWORD] [-o]"
+ echo "-v: pathname to Video"
+ echo "-s: number of Seconds to skip before capturing (270 by default)"
+ echo "-c: Clobber any previous screenshot found for this video (off by default)"
+ echo "-b: mysql server (Backend) hostname (localhost by default)"
+ echo "-u: mysql Username (mythtv by default)"
+ echo "-p: mysql Password (mythtv by default)"
+ echo "-o: verbOse mode (off by default)"
+ echo "-x: check for valid video eXtension (off by default)"
+ echo
+ echo "EXAMPLE: $0 -v /myth/video/HDTV/shuttle.mpg -c -s 30"
+ exit 3
+}
+
+if [ -z $1 ]; then
+ Usage
+fi
+
+V_MISSING=1
+
+while getopts "v:sbupochx" FLAG ; do
+ case "$FLAG" in
+ v) VIDEO_PATHNAME="$OPTARG"
+ V_MISSING=0;;
+ s) SKIPAHEAD="$OPTARG";;
+ c) CLOBBER=1;;
+ b) BACKEND_HOSTNAME="$OPTARG";;
+ u) DBUSERNAME="$OPTARG";;
+ p) DBPASSWORD="$OPTARG";;
+ o) VERBOSE=1;;
+ x) EXTENSION_CHECK=1;;
+ *) Usage;;
+ esac
+done
+
+if [ $V_MISSING == 1 ]; then
+ Usage
+fi
+
+# Declaring Variables here and assigning sensible defaults.
+
+# SKIPAHEAD is the number of seconds to skip ahead before starting the frame capture.
+# Set it to an arbitrary value if none is specified.
+SKIPAHEAD=${SKIPAHEAD:-"270"}
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+# Defaults to quiet.
+VERBOSE=${VERBOSE:-0}
+# Unless otherwise told, do not clobber existing cover files.
+CLOBBER=${CLOBBER:-0}
+# Unless otherwise told, do not check the file extension against
+# MythTV's list of registered video file types.
+EXTENSION_CHECK=${EXTENSION_CHECK:-0}
+
+VIDEO_CAPTURE_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoArtworkDir' limit 1")
+if [ ! -d "$VIDEO_CAPTURE_HOME" ] ; then
+ echo "Directory $VIDEO_CAPTURE_HOME does not exist, nowhere to put the screen shot!"
+ echo "Have you configured MythVideo yet?"
+ exit 1
+fi
+
+VIDEO_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoStartupDir' limit 1")
+if [ ! -d "$VIDEO_HOME" ] ; then
+ echo "Directory $VIDEO_HOME does not exist, nowhere to put the screen shot!"
+ echo "Have you configured MythVideo yet?"
+ exit 1
+fi
+
+VIDEO_FILENAME=$(basename "$VIDEO_PATHNAME")
+VIDEO_EXTENSION=${VIDEO_FILENAME##*.}
+# Since we cron'd lets first make sure the validity of the file
+if [ "$EXTENSION_CHECK" == "1" ]; then
+ EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select f_ignore from videotypes where extension=\"$VIDEO_EXTENSION\";")
+ #excheck returns blank, it found nothing.
+ if [ "$EXCHECK" == "" ]; then
+ if [ "$VERBOSE" == "1" ]; then
+ echo "$VIDEO_EXTENSION does not appear to be a valid media file, skipping."
+ fi
+ exit 1
+ else
+ # It is valid, but should we ignore it. If so then excheck will equal 1.
+ if [ "EXCHECK" == "1" ]; then
+ if [ "$VERBOSE" == "1" ]; then
+ echo "$VIDEO_EXTENSION is set to ignore."
+ fi
+ exit 1
+ fi
+ # It is valid, it's not set to ignore.
+ if [ "$VERBOSE" == "1" ]; then
+ echo "$VIDEO_EXTENSION appears in the Database, checking further."
+ fi
+ EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select title from videometadata where filename=\"$VIDEO_PATHNAME\";")
+ #Right, the file is supposed to be playable. Has it been imported to the Db yet?
+ if [ "$EXCHECK" == "" ] ; then
+ if [ "$VERBOSE" == "1" ]; then
+ echo "$VIDEO_FILENAME does not exist in the database."
+ fi
+ exit 1
+ # If you decide you want the system to 'auto import' the video then comment out
+ # the exit line and uncomment the rest of it. Bewarned, this is sucky SQL at
+ # the best but will give sensible defaults.
+ #
+ # if [ "$VERBOSE" == "1" ]; then
+ # echo "Importing $VIDEO_FILENAME in to database."
+ # fi
+ # mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "insert into videometadata (intid, title, director, plot, rating, inetref, year, userrating, length, showlevel, filename, coverfile, childid, browse, playcommand, category) values (' ', '$VIDEO_FILENAME', 'Unknown', 'Unknown', 'NR', '00000000', 1895, 0.0, 0, 1, '$VIDEO_PATHNAME', 'No Cover', -1, 1, ' ', 0);"
+ fi
+ fi
+fi
+
+if [ "$CLOBBER" -eq 0 ]; then
+ # Since we're not clobbering, first check to see if this video already has a coverfile entry in MySQL:
+ SQL_CMD="select coverfile from videometadata where filename=\"$VIDEO_PATHNAME\";"
+ CURRENT_COVERFILE=`mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -B -e "$SQL_CMD" | tail -1`
+
+ if [[ "$CURRENT_COVERFILE" != "" ]] && [[ "$CURRENT_COVERFILE" != "No Cover" ]]; then
+ # there's already a cover file for this video
+ if [ "$VERBOSE" == "1" ]; then
+ echo "$VIDEO_FILENAME has cover file, skipping."
+ fi
+ exit 2
+ fi
+fi
+
+
+# Swap the video file extension for png. Should work assuming the extension only appears ONCE!
+VIDEO_CAPTURE_PATHNAME="$VIDEO_CAPTURE_HOME/$VIDEO_FILENAME.png"
+
+# How many frames of video to capture. We'll grab the last frame as our screenshot.
+if [ "$VIDEO_EXTENSION" == "m4v" ]; then
+ FRAMES_TO_CAPTURE="90"
+ SHOTFILE="000000"$FRAMES_TO_CAPTURE".png"
+else
+ FRAMES_TO_CAPTURE="05"
+fi
+
+SHOTFILE="000000"$FRAMES_TO_CAPTURE".png"
+VIDEO_STATS="/tmp/screenshooter_video_stats.txt"
+
+cd /tmp
+
+# The video we're processing may be shorter than SKIPAHEAD seconds.
+# Keep trying to capture until we find a SKIPAHEAD value within the length of the video.
+# Give up if we reach 0 seconds.
+while [ ! -f "$SHOTFILE" ]; do
+ /usr/bin/mplayer -ss $SKIPAHEAD -vf scale=640:-2 -ao null -vo png -quiet -frames $FRAMES_TO_CAPTURE -identify "$VIDEO_PATHNAME" &> $VIDEO_STATS &
+ TIMEOUT=9
+
+ # Some video formats will play audio only. This loop gives the above command 20 seconds to
+ # finish, otherwise it gets killed.
+ while [ -n "`ps -p $! --no-heading`" ]; do
+ TIMEOUT=$(expr $TIMEOUT - 1)
+ if [ "$TIMEOUT" -le 0 ]; then
+ kill -9 $!
+ break
+ fi
+ sleep 1
+ done
+
+ SKIPAHEAD=$(expr $SKIPAHEAD / 2)
+ if [ "$SKIPAHEAD" -le 0 ]; then
+ break
+ fi
+done
+
+if [ -f "$SHOTFILE" ]; then
+ # Now, the video_capture is taken, and the name of the shot is in $SHOTFILE
+ # Rename it and move it to the place where video_captures live.
+ /bin/mv -f "$SHOTFILE" "$VIDEO_CAPTURE_PATHNAME"
+ /bin/rm -f 000000*png
+ chown mythtv: "$VIDEO_CAPTURE_PATHNAME"
+
+ # We've got the shotfile nailed, now calculate video run length.
+ VIDEO_LENGTH_IN_SECONDS=`grep ID_LENGTH $VIDEO_STATS | awk -F'=' '{print $2}'`
+ VIDEO_LENGTH_IN_INTEGER_SECONDS=${VIDEO_LENGTH_IN_SECONDS/%.*/}
+ if [ $VIDEO_LENGTH_IN_INTEGER_SECONDS -lt 60 ]; then
+ VIDEO_LENGTH_IN_MINUTES="1"
+ else
+ VIDEO_LENGTH_IN_MINUTES=$(expr $VIDEO_LENGTH_IN_INTEGER_SECONDS / 60)
+ fi
+
+ SQL_CMD="update videometadata set length=\"$MIN_LENGTH\" where filename=\"$VIDEO_PATHNAME\";"
+ mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD"
+
+
+ # put the screenshot pathname and any runlength info into videometadatatable
+
+ # Pre-escape any single or double quotes for the SQL command.
+
+ VIDEO_CAPTURE_PATHNAME=`echo $VIDEO_CAPTURE_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' `
+ VIDEO_PATHNAME=`echo $VIDEO_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' `
+ SQL_CMD="update videometadata set coverfile=\"$VIDEO_CAPTURE_PATHNAME\", length=\"$VIDEO_LENGTH_IN_MINUTES\" where filename=\"$VIDEO_PATHNAME\";"
+
+ mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD"
+else
+ echo "No image could be captured from $VIDEO_PATHNAME"
+ exit 1
+fi
diff --git a/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh b/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh
new file mode 100755
index 0000000..db01147
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh
@@ -0,0 +1,11 @@
+#! /bin/bash
+# available sizes: 34, 25, 24, 20, 18, 17, 14, 12, 11, 10
+export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
+echo "This could take several minutes," > /tmp/screens
+echo "depending on your hardware and the" >> /tmp/screens
+echo "number and type of videos you have." >> /tmp/screens
+echo "It will only work on videos scanned" >> /tmp/screens
+echo "with Video Manager." >> /tmp/screens
+cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --offset=200 --color=yellow --delay=0 &
+shootscreens.sh 1
+/bin/rm -f /tmp/screens \ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/shootscreens.sh b/abs/core-testing/linhes-scripts/src/shootscreens.sh
new file mode 100755
index 0000000..7b1260c
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/shootscreens.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# This code generates screenshots (cover files) for all videos in
+# MythTV's videometadata table that do not have covers associated with them.
+
+if [ "$1" == "1" ]; then
+ OSD=1
+else
+ OSD=0
+fi
+
+> /tmp/shooter.log
+{
+ percentage=0
+ # Change IFS to be a newline so that filenames with spaces will be handled properly.
+ IFS=$'\n'
+ vidcount=`mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | wc -l`
+ increment=$(expr 100 / $vidcount)
+ for vid in `mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | grep -v -e "^filename$"`
+ do
+ if [ $OSD == 1 ]; then
+ osd_cat --barmode=percentage --percentage=$percentage --pos=middle --align=center --color=white --text="Generating Video Thumbnails..." --font=$FONT --shadow=3 --color=yellow --delay=0 &
+ percentage=$(expr $percentage + $increment)
+ fi
+
+ screenshooter.sh -v $vid
+ done
+ if [ $OSD == 1 ]; then
+ killall -9 osd_cat
+ osd_cat --barmode=percentage --percentage=100 --pos=middle --align=center --color=white --text="Video Thumbnails Generated!" --font=$FONT --shadow=3 --color=yellow --delay=3 &
+ fi
+} \ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/vdpau-detector b/abs/core-testing/linhes-scripts/src/vdpau-detector
new file mode 100755
index 0000000..c8cd155
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/vdpau-detector
@@ -0,0 +1,103 @@
+#!/bin/bash
+
+# This script written by an anonymous author
+# Original page http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo
+#
+# It's modded to allow vdpau switches commands to pass to a modded version of Bob Igo's
+# mplayer-resumer.pl wrapper for mplayer
+#
+# User can customize commandline for mplayer by editing the appropriate sections below
+# They include BASIC_OPTS, NOHD_OPTS, and LOW_OPTS
+
+IAM=$0
+FILE=$1
+
+#if no input display usage
+if [[ -z "$FILE" ]]; then
+ echo usage: $0 /path/to/file
+ exit
+fi
+
+MPLAYER="/usr/bin/mplayer"
+
+# For a complete list of options, see the mplayer DOCS
+# http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html
+#
+
+# Options for all videos: fullscreen, zoom, and use software eq
+BASIC_OPTS="-fs -zoom"
+
+# Options for non-HD videos: force aspect to 16x10 (to ensure video fills TV screen)
+# You'll need to modify the ratio if your res differs
+# Example: 1920x1080 = 1.778 = 16:9
+# Example: 1680x1050 = 1.600 = 16:10
+# Example: 1280x720 = 1.778 = 16:9
+
+NOHD_OPTS="-aspect 16:10"
+
+# Options for normal and lowres videos: use XV forcing 16x10
+LOW_OPTS="-aspect 16:10 -vo xv"
+
+VWIDTH=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_WIDTH | cut -c 16-25)
+VCODEC=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_CODEC | cut -c 16-25)
+
+# all following echo commands can be uncommented for debug info
+#echo .
+#echo " DEBUG info: video codec: $VCODEC"
+#echo " DEBUG info: video width: $VWIDTH"
+#echo " Debug info:
+
+
+# Test for codec, if it's supported by VDPAU, set options to use it. Then, check if the video is in HD,
+# and if it's not, set non-HD options.
+case $VCODEC in
+ffh264)
+ #echo -e "Playing h.264 file $FILE:\n"
+ MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffh264vdpau"
+ if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+ fi
+ if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+ fi
+ ;;
+ffmpeg2)
+ #echo -e "Playing MPEG2 file $FILE:\n"
+ MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffmpeg12vdpau"
+ if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+ fi
+ if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+ fi
+ ;;
+ffwmv3)
+ #echo -e "Playing WMV3 file $FILE:\n"
+ MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffwmv3vdpau"
+ if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+ fi
+ if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+ fi
+ ;;
+# VC-1 is largely unsupported by nvidia - uncomment this section if you're sure your card supports it.
+ffvc1)
+ #echo -e "Playing VC-1 file $FILE:\n"
+ MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffvc1vdpau"
+ if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+ fi
+ if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+ MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+ fi
+ ;;
+*)
+ #echo -e "Playing normal file $FILE:\n"
+ # Use XV and yadif filter with 'normal' (DiVX, XViD, old WMV, etc.) files, and force 16:9
+ # -vf filters only seem to work with XV, or at least they don't work w/VDPAU
+ MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+ ;;
+esac
+
+echo $MPLAYEROPTS
diff --git a/abs/core-testing/tweaker/PKGBUILD b/abs/core-testing/tweaker/PKGBUILD
index 43ca495..75c893a 100644
--- a/abs/core-testing/tweaker/PKGBUILD
+++ b/abs/core-testing/tweaker/PKGBUILD
@@ -1,6 +1,6 @@
pkgname=tweaker
pkgver=1
-pkgrel=48
+pkgrel=49
pkgdesc="applies tweaks to the baseline configuration and attempts to optimize settings for the hardware it finds"
arch=('i686' 'x86_64')
diff --git a/abs/core-testing/tweaker/bin/twk_general.pl b/abs/core-testing/tweaker/bin/twk_general.pl
index f181310..4a18f1e 100755
--- a/abs/core-testing/tweaker/bin/twk_general.pl
+++ b/abs/core-testing/tweaker/bin/twk_general.pl
@@ -363,7 +363,9 @@ sub implement_option {
change_or_make_setting('JobAllowCommFlag', '1');
change_or_make_setting('JobAllowTranscode', '1');
change_or_make_setting('JobAllowUserJob1', '1');
- change_or_make_setting('JobAllowUserJob2', '2');
+ change_or_make_setting('JobAllowUserJob2', '1');
+ change_or_make_setting('JobAllowUserJob3', '1');
+ change_or_make_setting('JobAllowUserJob4', '1');
change_or_make_setting('JobQueueCPU','0');
change_or_make_setting('JobQueueCheckFrequency','60');
change_or_make_setting('JobQueueCommFlagCommand','mythcommflag');
@@ -405,13 +407,14 @@ sub implement_option {
change_or_make_setting('StartupSecsBeforeRecording', '120');
change_or_make_setting('TruncateDeletesSlowly', '1');
change_or_make_setting('UseOutputPictureControls', '1');
- change_or_make_setting('UserJob2', 'myth2x264 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
- change_or_make_setting('UserJob3', 'myth2xvid \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
- change_or_make_setting('UserJob4', 'myth2mp3 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\"');
- change_or_make_setting('UserJobDesc1', 'User Job #1');
- change_or_make_setting('UserJobDesc2', 'Transcode for iPod');
- change_or_make_setting('UserJobDesc3', 'Transcode to xvid');
- change_or_make_setting('UserJobDesc4', 'Extract audio');
+ change_or_make_setting('UserJob1', 'myth2ipod \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+ change_or_make_setting('UserJob2', 'myt2xvid3 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+ change_or_make_setting('UserJob3', 'myth2x264 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+ change_or_make_setting('UserJob4', 'removecommercials \"%DIR%\" \"%FILE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+ change_or_make_setting('UserJobDesc1', 'Transcode for iPod');
+ change_or_make_setting('UserJobDesc2', 'Transcode to xvid');
+ change_or_make_setting('UserJobDesc3', 'Transcode to h264');
+ change_or_make_setting('UserJobDesc4', 'Remove Commercials');
change_or_make_setting('UseOutputPictureControls','0'); # If this is set to '1' it can swap blue for red (and vice versa) on some nVidia GPUs
change_or_make_setting('VCDPlayerCommand', 'mplayer-wrapper.pl vcd:\/\/ -cdrom-device %d -fs -zoom');
change_or_make_setting('VideoArtworkDir', "$SQL_DirVideo/.covers");