diff options
Diffstat (limited to 'abs/core/diskless-legacy')
| -rw-r--r-- | abs/core/diskless-legacy/PKGBUILD | 16 | ||||
| -rwxr-xr-x | abs/core/diskless-legacy/config_diskless_frontend.bash | 678 |
2 files changed, 694 insertions, 0 deletions
diff --git a/abs/core/diskless-legacy/PKGBUILD b/abs/core/diskless-legacy/PKGBUILD new file mode 100644 index 0000000..6b7cea7 --- /dev/null +++ b/abs/core/diskless-legacy/PKGBUILD @@ -0,0 +1,16 @@ +# $Id: PKGBUILD 23123 2009-01-03 02:43:02Z kevin $ +# Maintainer: Greg Frost <gregfrost1@bigpond.com> +pkgname=diskless-legacy +pkgver=1 +pkgrel=1 +pkgdesc="Script for configuring a diskless mythtv frontends using NFS root." +arch=i686 +depends=(tftp-hpa dhcp) +source=(config_diskless_frontend.bash) +md5sums=('825fbc61ef209dc47f17dbaab5829779') + +build() { + install -D -m755 ${srcdir}/config_diskless_frontend.bash \ + ${pkgdir}/usr/local/bin/config_diskless_frontend.bash +} +md5sums=('825fbc61ef209dc47f17dbaab5829779') diff --git a/abs/core/diskless-legacy/config_diskless_frontend.bash b/abs/core/diskless-legacy/config_diskless_frontend.bash new file mode 100755 index 0000000..ffd1afd --- /dev/null +++ b/abs/core/diskless-legacy/config_diskless_frontend.bash @@ -0,0 +1,678 @@ +#!/bin/bash +# This script configures your backend so that a diskless +# frontend can boot from it. + +function backtitle() { # no arguments. + BT="${0##*/}" + KMV_F1='/KNOPPIX/KnoppMyth-version' + KMV_F2='/etc/LinHES-release' + if [ -f "$KMV_F1" ]; then + BT="-= $(cat $KMV_F1) $BT =-" + elif [ -f "$KMV_F2" ]; then + BT="-= $(cat $KMV_F2) $BT =-" + fi +} + +function must_be_root() { # no arguments. + test $(id -u) == 0 && return + MSG="\Z1ERROR\Zn: This script \Z4should\Zn be run by \Z1root\Zn." + dialog --backtitle "$BT" --colors --msgbox "$MSG" 5 45 + exit 4 +} + +backtitle +must_be_root + +TITLE="Diskless FE Configuration" +DOPTS=(--backtitle "$BT" --title "$TITLE" --trim --aspect 30 ) + +DAEMON_LOG=/var/log/daemon.log +BOOT_DEFAULT=/tftpboot/pxelinux.cfg/default + +unable_to_determine_mac_for_default_fe () +{ + if dialog "${DOPTS[@]}" --yes-label "Boot FE and try again" \ + --no-label "Delete $fe_nfsroot" \ + --yesno "Unable to automatically determine the MAC address of + the current default frontend by interrogating $DAEMON_LOG. + This may be because you have not yet booted the diskless FE. You can + either boot the diskless FE and try running $0 again, or delete + $fe_nfsroot and re-create it later." 0 0 ; then + exit + else + rm -Rf $fe_nfsroot $BOOT_DEFAULT + fi + exit +} + +find_existing_diskless_fes() { + + unset frontend_names + unset frontend_nfsroots + unset frontend_ips + unset frontend_macs + + for frontend_config in $(ls /tftpboot/pxelinux.cfg 2> /dev/null) ; do + + frontend_name=$(basename $( + grep append /tftpboot/pxelinux.cfg/$frontend_config | + sed -e 's/.*nfsroot=//' | awk -F, '{print $1}' | awk -F/ '{print $NF}')) + frontend_nfsroot=$( + grep append /tftpboot/pxelinux.cfg/$frontend_config | + cut -d ':' -f 2 | cut -d ',' -f 1) + frontend_ip=\ +$((0x${frontend_config:0:2})).$((0x${frontend_config:2:2})).\ +$((0x${frontend_config:4:2})).$((0x${frontend_config:6:2})) + frontend_mac=$( + cat /etc/dhcpd.conf | + grep "host $frontend_name" | + sed 's/hardware ethernet /#/g' | + cut -d '#' -f 2 | + cut -d ';' -f 1) + + if [ -n "$frontend_name" -a -n "$frontend_nfsroot" -a \ + -n "$frontend_ip" -a -n "$frontend_mac" ] ; then + frontend_names=( "${frontend_names[@]}" $frontend_name ) + frontend_nfsroots=( "${frontend_nfsroots[@]}" $frontend_nfsroot ) + frontend_ips=( "${frontend_ips[@]}" $frontend_ip ) + frontend_macs=( "${frontend_macs[@]}" $frontend_mac ) + fi + done + +echo frontend_names="${frontend_names[@]}" +echo frontend_nfsroots="${frontend_nfsroots[@]}" +echo frontend_ips="${frontend_ips[@]}" +echo frontend_macs="${frontend_macs[@]}" + +} + +check_for_default_fe () { + # This function looks to see if there is a diskless FE that has only been + # partially configured (i.e. it's MAC address has not been determined and + # as a result it has not been allocated a fixed IP. + + if [ -e $BOOT_DEFAULT ] ; then + # There is a $BOOT_DEFAULT config file that has not yet been set to a + # fixed IP address. See if we can interrogate the log files to + # determine what the MAC adderss of the FE is so that we can turn it + # into a fixed ip node. This is the first step in allowing multiple + # diskless frontends. + + # First determine from the default file, the nfsroot that it is for. + + fe_nfsroot=$(grep append $BOOT_DEFAULT | cut -d ':' -f 2 | cut -d ',' -f 1) + + if [ -z "$fe_nfsroot" ] ; then + echo "Unable to determine the location of the nfsroot from" \ + $BOOT_DEFAULT + exit + fi + + echo fe_nfsroot=$fe_nfsroot + + # Now determine the IP address by looking for an instance in the + # daemon log file for which the specified nfsroot was mounted. + + fe_ipaddress=$( + grep "authenticated mount request from " $DAEMON_LOG | + grep $fe_nfsroot | + tail -1 | + sed 's/authenticated mount request from /#/g' | + cut -d '#' -f 2 | + cut -d ':' -f 1) + + echo fe_ipaddress=$fe_ipaddress + + unset fe_macaddress + + if [ ! -z "$fe_ipaddress" ] ; then + fe_macaddress=$( + grep "DHCPACK on $fe_ipaddress" $DAEMON_LOG | + tail -1 | + sed 's/DHCPACK on '$fe_ipaddress' to /#/g' | + cut -d '#' -f 2 | + cut -d ' ' -f 1) + fi + + echo fe_macaddress=$fe_macaddress + + if [ -z "$fe_macaddress" ] ; then + unable_to_determine_mac_for_default_fe + else + if ! dialog "${DOPTS[@]}" --yesno "By interrogating $DAEMON_LOG, + it appears that the $(basename $fe_nfsroot) frontend was + last used by a host with MAC Address of $fe_macaddress which + was allocated IP address $fe_ipaddress. + Do you wish to allocate the IP to that host (so that you + can configure another diskless FE)?" 0 0 ; then + dialog "${DOPTS[@]}" --msgbox "Boot the correct diskless FE and + run $0 again." 0 0 + exit + fi + + # Setup dhcpd.conf so that the FE's MAC address always uses a fixed + # ip address and the PXE configuration is fixed for that address. + + hex_ip_address=$(printf "%02X%02X%02X%02X" $(echo $fe_ipaddress | + tr '.' ' ')) + echo hex_ip_address=$hex_ip_address + mv -fv $BOOT_DEFAULT $(dirname $BOOT_DEFAULT)/$hex_ip_address + + cp -f /etc/dhcpd.conf /etc/dhcpd.conf.bak + cat /etc/dhcpd.conf.bak | + grep -v "host $(basename $fe_nfsroot)" > \ + /etc/dhcpd.conf + echo "\ +host $(basename $fe_nfsroot) \ +{hardware ethernet $fe_macaddress; fixed-address $fe_ipaddress;}" \ + >> /etc/dhcpd.conf + + /sbin/sv restart dhcpd + + dialog "${DOPTS[@]}" --msgbox "The frontend $(basename $fe_nfsroot) + with a MAC address of $fe_macaddress and an nfsroot directory of + $fe_nfsroot has been configured with a fixed IP address of + $fe_ipaddress." 0 0 + exit + fi + fi + +} + +get_network_interface() { + NETDEVICES="$(cat /proc/net/dev | + awk -F: '/ath.:|wlan.:|eth.:|tr.:/{print $1}')" + echo NETDEVICES=$NETDEVICES + NUM_DEVICES=$(echo $NETDEVICES | wc -w) + echo NUM_DEVICES=$NUM_DEVICES + if [ $NUM_DEVICES = 1 ] ; then + INTERFACE=$NETDEVICES + else + DEVICELIST="" + DEVNUM=0 + for DEVICE in $NETDEVICES + do + DEVNUM=$(($DEVNUM + 1)) + DEVICELIST="$DEVICELIST $DEVICE Interface${DEVNUM} " + done + echo DEVICELIST=$DEVICELIST + TMP=/tmp/interface + rm -Rf $TMP + dialog "${DOPTS[@]}" --menu "Which network interface?" 18 70 12 \ + $DEVICELIST 2>$TMP || exit + INTERFACE=$(cat $TMP) + fi + echo INTERFACE=$INTERFACE +} + +validip(){ + echo "$1" | egrep -q -e '[0-9]+\.[0-9]+\.[0-9]+.[0-9]+' + return $? +} + +get_network_info() { + BACKEND_IP=$(echo $(ifconfig $INTERFACE | grep "inet addr" | tr ':' ' ') | + cut -d ' ' -f 3) + echo BACKEND_IP=$BACKEND_IP + NAMESERVERS="$(awk '/^nameserver/{printf "%s ",$2}' /etc/resolv.conf)" + echo NAMESERVERS=$NAMESERVERS + GATEWAY="$(LANG=C LC_ALL=C route -n | awk '/^0\.0\.0\.0/{print $2; exit}')" + echo GATEWAY=$GATEWAY + NETWORK="${BACKEND_IP%.*}" + echo NETWORK=$NETWORK + HOST="${BACKEND_IP##*.}" + echo HOST=$HOST + NETMASK="$(LANG=C LC_ALL=C ifconfig $INTERFACE | + awk '/[Mm]ask/{FS="[: ]*";$0=$0; print $8; exit}')" + echo NETMASK=$NETMASK + + # See if we can determine the range of IP addresses currently allowed in + # dhcpd.conf + + IPRANGE=( $(grep ^[[:space:]]*range /etc/dhcpd.conf | + sed 's/range//g' | tr -d ';') ) + + echo ${IPRANGE[@]} + if [ $(echo ${IPRANGE[@]} | wc -w) -eq 2 ] ; then + START=$(echo ${IPRANGE[0]} | tr '.' '\t' | cut -f 4) + END=$(echo ${IPRANGE[1]} | tr '.' '\t' | cut -f 4) + echo START=$START + echo END=$END + fi + + # Could not + + if [ -z "$START" -o -z "$END" ] ; then + if [ "$HOST" -lt "20" ] ; then + START=21 + END=26 + else + START=11 + END=16 + fi + fi + + IPRANGE_FROM="" + IPRANGE_TO="" + + while [ -z "$IPRANGE_FROM" -o -z "$IPRANGE_TO" -o -z "$IPRANGE" ] + do + IPRANGE="$NETWORK.$START $NETWORK.$END" + rm -f /tmp/iprange + + if ! dialog "${DOPTS[@]}" --clear --inputbox "Please enter the desired + IP-Range of addresses that should be allocated by clients, + separated by a single space." 10 75 "$IPRANGE" \ + 2> /tmp/iprange ; then + exit + fi + + IPRANGE=$(cat /tmp/iprange) + echo IPRANGE=$IPRANGE + IPRANGE_FROM="${IPRANGE%% *}" + IPRANGE_TO="${IPRANGE##* }" + + for i in "$IPRANGE_FROM" "$IPRANGE_TO" + do + validip "$i" || IPRANGE="" + done + done +} + +setup_dhcpd() { + # Generate dhcpd.conf from template + + if [ ! -f /etc/dhcpd.conf.orig ] ; then + mv -f /etc/dhcpd.conf /etc/dhcpd.conf.orig + fi + + ALLNAMESERVERS="" + for i in $NAMESERVERS; do + ALLNAMESERVERS="${ALLNAMESERVERS:+$ALLNAMESERVERS,} $i" + done + echo ALLNAMESERVERS=$ALLNAMESERVERS + + cat >/etc/dhcpd.conf <<EOT +# dhcpd.conf for LinHES Diskless Frontend + +# global settings +## POF allow booting; +allow bootp; +default-lease-time 600; +max-lease-time 7200; + +subnet ${NETWORK}.0 netmask ${NETMASK} { + next-server $BACKEND_IP; + filename "pxelinux.0"; + option subnet-mask ${NETMASK}; + range ${IPRANGE_FROM} ${IPRANGE_TO}; + ${ALLNAMESERVERS:+option domain-name-servers $ALLNAMESERVERS;} + ${GATEWAY:+option routers $GATEWAY;} +} +EOT + + for (( fe = 0 ; fe < ${#frontend_names[@]} ; fe++ )) ; do + echo "host ${frontend_names[$fe]} \ +{hardware ethernet ${frontend_macs[$fe]}; \ +fixed-address ${frontend_ips[$fe]};}" >> \ + /etc/dhcpd.conf + done + + /sbin/add_service.sh dhcpd + /sbin/sv restart dhcpd +} + +setup_tftpd() { + + /sbin/add_service.sh tftpd + /sbin/sv restart tftpd +} + +check_delete_of_existing_nfsroot() { + if [ -d $NFSROOT ] ; then + if dialog "${DOPTS[@]}" --yesno "\ +There is already a directory $NFSROOT. Do you want to delete it and \ +rebuild it from scratch?" 10 70 ; then + echo Deleting $NFSROOT + rm -Rf $NFSROOT + else + echo "OK then, bye." + exit + fi + fi +} + +enable_mysql_and_backend_networking() { + # Enable mysql networking on the backend. + + /sbin/sv stop mythbackend + + if grep -q ^skip-networking /etc/my.cnf ; then + echo "Commenting out skip-networking." + cp /etc/my.cnf /etc/my.cnf~ + cat /etc/my.cnf~ | sed 's/^skip-networking/#skip-networking/g' > \ + /etc/my.cnf + /sbin/sv restart mysql + else + echo "Already commented out skip-networking." + fi + + # Make sure that the backend ip settings in the mythtv mysql database have + # the actual IP address of the backend rather than the loopback address. + # Otherwise the frontend will not be able to connect to the backend. + + echo "Setting backend IP in mythtv's mysql settings" + echo " +UPDATE settings SET data='$BACKEND_IP' WHERE value='BackendServerIP'; +UPDATE settings SET data='$BACKEND_IP' WHERE value='MasterServerIP';" | + mysql mythconverg + + /sbin/sv start mythbackend +} + +export_mounts() { + # Ensure that the /myth directory is exported. + + if ! grep -q ^/myth[[:space:]] /etc/exports ; then + echo "Adding line for /myth in /etc/exports" + echo "/myth *(rw,async,no_subtree_check)" >> /etc/exports + else + echo "Already added line for /myth in /etc/exports" + fi + + if ! grep -q ^/data/var/cache/pacman[[:space:]] /etc/exports ; then + echo "Adding line for /data/var/cache/pacman in /etc/exports" + echo "/data/var/cache/pacman *(rw,async,no_subtree_check)" >> /etc/exports + else + echo "Already added line for /data/var/cache/pacman in /etc/exports" + fi +} + +enable_nfs() { + # Enable NFS. + + /sbin/add_service.sh nfsd + +} + +restart_nfs (){ + /usr/sbin/exportfs -arv +} + +export_nfsroot() { + # Ensure that the NFSROOT directory is appropriately exported. + + if ! grep -q ^$NFSROOT[[:space:]] /etc/exports ; then + echo "Adding line for $NFSROOT in /etc/exports" + echo "$NFSROOT *(rw,no_root_squash,async,no_subtree_check)" >> /etc/exports + else + echo "Already added line for $NFSROOT in /etc/exports" + fi +} + +create_tftpboot_directory() { + # Create the directory with the tftp stuff. + + echo "Creating /tftpboot directories" + mkdir -p /tftpboot/pxelinux.cfg + + if [ ! -e /tftpboot/pxelinux.0 ] ; then + cp -fv /usr/lib/syslinux/pxelinux.0 /tftpboot/pxelinux.0 + fi + + if [ ! -e /tftpboot/vmlinuz26 ] ; then + cp -fv /boot/vmlinuz26 /tftpboot/vmlinuz26 + fi + + if [ ! -e /tftpboot/kernel26.img ] ; then + + echo "Building kernel miniroot" + if [ -z "$(awk -F\" '$1 ~ /^MODULES=/ && $2 ~ /nfs/' /etc/mkinitcpio.conf)" ] ; then + cp /etc/mkinitcpio.conf /etc/mkinitcpio.conf~ + sed -e '/^MODULES=/s/\"$/ nfs\"/' < /etc/mkinitcpio.conf~ > /etc/mkinitcpio.conf + fi + if [ -z "$(awk -F\" '$1 ~ /^HOOKS=/ && $2 ~ /net/' /etc/mkinitcpio.conf)" ] ; then + cp /etc/mkinitcpio.conf /etc/mkinitcpio.conf~ + sed -e '/^HOOKS=/s/\"$/ net\"/' < /etc/mkinitcpio.conf~ > /etc/mkinitcpio.conf + fi + /sbin/mkinitcpio -g /tftpboot/kernel26.img + fi +} + +create_default_pxelinux_entry() { + echo "\ + default linux + + label linux + kernel vmlinuz26 + append initrd=kernel26.img rootfstype=nfs root=/dev/nfs nfsroot=$BACKEND_IP:$NFSROOT,v3,rsize=16384,wsize=16384 init=/sbin/runit ip=dhcp" \ + > /tftpboot/pxelinux.cfg/default +} + +create_new_nfsroot() { + # Prompt the user for the name of the NFSROOT. + + FRONTEND= + NFSROOT= + + while [ -z "$FRONTEND" ] ; do + if ! dialog "${DOPTS[@]}" --inputbox "Enter the hostname of the new + diskless FE:" 0 0 2> /tmp/frontend_hostname ; then + exit + fi + + FRONTEND=$(cat /tmp/frontend_hostname) + done + + # Prompt the user for the location of the NFSROOT. + + while [ -z "$NFSROOT" ] ; do + NFSROOT=/nfsroot/$FRONTEND + + if ! dialog "${DOPTS[@]}" --clear --inputbox "Enter the location of the + NFSROOT for the diskless FE:" \ + 0 0 "$NFSROOT" 2> /tmp/nfsroot_location ; then + exit + fi + + NFSROOT=$(cat /tmp/nfsroot_location) + done + + check_delete_of_existing_nfsroot + + # Create the nfsroot directory that the FE will use as its root filesystem. + + echo "Creating the $NFSROOT directory." + mkdir -p $NFSROOT + for DIR in /* ; do + if [[ "$DIR" != /myth && \ + "$DIR" != /mnt && \ + "$DIR" != /bin && \ + "$DIR" != /sbin && \ + "$DIR" != /tmp && \ + "$DIR" != /data && \ + "$DIR" != /media && \ + "$DIR" != /proc && \ + "$DIR" != /sys && \ + "$DIR" != /storage && \ + "$DIR" != /var && \ + "$DIR" != /nfsroot && \ + "$DIR" != /tftpboot && \ + "$DIR" != /cdrom ]] + then + echo " Copying $DIR to $NFSROOT" + cp -ax $DIR $NFSROOT + fi + done + + cp -alx /bin $NFSROOT + cp -alx /sbin $NFSROOT + + cd $NFSROOT + + # Exclude specific bits of /var + + tar c /var \ + --exclude=/var/lib/dhcpcd \ + --exclude=/var/lib/locate \ + --exclude=/var/lib/mlocate \ + --exclude=/var/lib/named \ + 2> /dev/null | tar x 2> /dev/null + + for DIR in /myth /mnt /data /tmp /proc /media /sys /cdrom /var/lib/mlocate ; do + echo " Creating $DIR" + tar c $DIR --exclude=$DIR/* 2> /dev/null | tar x 2> /dev/null + done + + mkdir -p $NFSROOT/data/var/cache/pacman + + chroot $NFSROOT /sbin/remove_service.sh dhcpd + chroot $NFSROOT /sbin/remove_service.sh lighttpd + chroot $NFSROOT /sbin/remove_service.sh mysql + chroot $NFSROOT /sbin/remove_service.sh mythbackend + chroot $NFSROOT /sbin/remove_service.sh nfsd + chroot $NFSROOT /sbin/remove_service.sh nmbd + chroot $NFSROOT /sbin/remove_service.sh smbd + chroot $NFSROOT /sbin/remove_service.sh tftpd + + # Update the fstab. + + cp $NSFROOT/etc/fstab $NFSROOT/etc/fstab~ + cat $NFSROOT/etc/fstab~ | grep -v ext3 | + grep -v ^UUID= > $NFSROOT/etc/fstab + + echo "\ +$BACKEND_IP:/nfsroot / nfs defaults,nolock,auto,noatime 0 2 +$BACKEND_IP:/myth /myth nfs defaults,nolock,auto,noatime 0 0 +$BACKEND_IP:/data/var/cache/pacman /data/var/cache/pacman nfs defaults,nolock,auto,noatime 0 0 +" >> $NFSROOT/etc/fstab + + cp $NFSROOT/etc/rc.sysinit $NFSROOT/etc/rc.sysinit~ + sed -e '/^\/sbin\/minilogd/s/$/\n\n# Mount NFS early\n\/bin\/mount -a -t nfs/' \ + < $NFSROOT/etc/rc.sysinit~ > $NFSROOT/etc/rc.sysinit + + # Update networking + + echo $FRONTEND > $NFSROOT/etc/hostname + + cp $NFSROOT/etc/hosts $NFSROOT/etc/hosts~ + echo "127.0.0.1 $FRONTEND localhost" > $NFSROOT/etc/hosts + cat $NFSROOT/etc/hosts~ | grep -v 127.0.0.1 >> $NFSROOT/etc/hosts + + cp $NFSROOT/etc/net/ifaces/eth0/options $NFSROOT/etc/net/ifaces/eth0/options~ + sed -e 's/^BOOTPROTO=.*/BOOTPROTO=none/' < $NFSROOT/etc/net/ifaces/eth0/options~ \ + > $NFSROOT/etc/net/ifaces/eth0/options + + # Update mysql settings + + cp /usr/share/mythtv/mysql.txt $NFSROOT/home/mythtv/.mythtv/mysql.txt + + if grep -q DBHostName=localhost $NFSROOT/home/mythtv/.mythtv/mysql.txt ; then + echo "Setting database host in frontend's mysql.txt." + cp $NFSROOT/home/mythtv/.mythtv/mysql.txt \ + $NFSROOT/home/mythtv/.mythtv/mysql.txt.orig + cat $NFSROOT/home/mythtv/.mythtv/mysql.txt.orig | + sed 's/DBHostName=localhost/DBHostName='$BACKEND_IP'/g' > \ + $NFSROOT/home/mythtv/.mythtv/mysql.txt + else + echo "Already set Database host in frontend's mysql.txt." + fi + + chown mythtv:mythtv $NFSROOT/home/mythtv/.mythtv/mysql.txt + +# echo > $NFSROOT/etc/mythtv/Cards + + create_default_pxelinux_entry + export_nfsroot + restart_nfs + + dialog "${DOPTS[@]}" --msgbox "Boot your diskless FE + and then re-run this script ($0) so that the MAC address + of the Diskless FE can be obtained." 0 0 + +} + + + +########################################## +########################################## +## +## MAIN BODY OF SCRIPT ## +## +########################################## +########################################## + + + +check_for_default_fe +find_existing_diskless_fes + +get_network_interface +get_network_info +setup_tftpd +setup_dhcpd +enable_mysql_and_backend_networking +export_mounts +create_tftpboot_directory +enable_nfs + +# Restart nfs to ensure that the exported /myth directory can be mounted. This +# is required to create a new frontend. + +restart_nfs + +if [ ${#frontend_names[@]} -eq 0 ] ; then + create_new_nfsroot +else + for (( fe = 0 ; fe < ${#frontend_names[@]} ; fe++ )) ; do + frontend_options=( "${frontend_options[@]}" \ + "${frontend_names[$fe]} (MAC:${frontend_macs[$fe]} \ +IP:${frontend_ips[$fe]})" "" ) + done + +echo 0=${frontend_names[0]} +echo 1=${frontend_names[1]} +echo 2=${frontend_names[2]} +echo 3=${frontend_names[3]} + + if ! dialog "${DOPTS[@]}" --menu "Select a frontend to delete or to create + a new one." 0 0 0 "${frontend_options[@]}" \ + "New Frontend" "" 2> /tmp/selected_fe; then + exit + fi + + selected_option=$(cat /tmp/selected_fe) + + if [ "$selected_option" = "New Frontend" ] ; then + create_new_nfsroot + exit + fi + +echo $selected_option +echo ${frontend_options[0]} +echo ${frontend_options[2]} +echo ${frontend_nfsroots[@]} + + for (( fe = 0 ; fe < ${#frontend_names[@]} ; fe++ )) ; do + if [ "$selected_option" = "${frontend_options[$(($fe*2))]}" ] ; then + if dialog "${DOPTS[@]}" --yesno "Do you wish to delete the frontend + with nfsroot ${frontend_nfsroots[$fe]}?" 0 0 ; then + # Delete the nfsroot directory. + rm -Rfv ${frontend_nfsroots[$fe]} + + # Delete the tftpboot pxe boot config file. + + hex_ip_address=$(printf "%02X%02X%02X%02X" \ + $(echo ${frontend_ips[$fe]} | tr '.' ' ')) + rm /tftpboot/pxelinux.cfg/$hex_ip_address + + # Remove reference to the frontend from the dhcp.conf + cp -fv /etc/dhcpd.conf /etc/dhcpd.conf.bak + grep -v "host ${frontend_names[$fe]}" /etc/dhcpd.conf.bak > \ + /etc/dhcpd.conf + /sbin/sv restart dhcpd + fi + fi + done +fi + |