diff options
Diffstat (limited to 'abs/core/linhes-live')
20 files changed, 0 insertions, 1612 deletions
diff --git a/abs/core/linhes-live/PKGBUILD b/abs/core/linhes-live/PKGBUILD deleted file mode 100644 index c86e3cc..0000000 --- a/abs/core/linhes-live/PKGBUILD +++ /dev/null @@ -1,32 +0,0 @@ -# Maintainer: R. Dale Thomas <rdt[at]KnoppMyth[dot]net> -# 2008.09.25 -pkgname=linhes-live -pkgver=5.3.3 -pkgrel=25 - -pkgdesc="LinHes compulsory components for the Live System." -url="http://KnoppMyth.net" -depends=() -arch=( i586 i686 x86_64 ) -license=('GPL') - -build() { - # setup the local environment: - local rDir=bin eDir=etc lDir=lib sDir=session-save oDir=opt/$pkgname - local srcDir=${startdir}/src pkgDir=${startdir}/pkg - local insDir=${pkgDir}/$oDir proDir=${pkgDir}/${eDir}/profile.d - - mkdir -p $pkgDir $insDir $proDir - cp -dr ${startdir}/$eDir $pkgDir - local pthDir= - echo 'export PATH=${PATH}:'"/$oDir/$rDir" > ${proDir}/${pkgname}.sh - cp -dr ${startdir}/$lDir $pkgDir - cp -dr ${startdir}/$rDir $insDir - [ -d ${startdir}/$sDir ] && cp -dr ${startdir}/$sDir $insDir - chown -R root.root $pkgDir - return 0 -} - -# End -#change hook1 to wait for usb cdroms -#add extra login to f_remountro for vmware/usb diff --git a/abs/core/linhes-live/bin/gen_fstab b/abs/core/linhes-live/bin/gen_fstab deleted file mode 100755 index db36546..0000000 --- a/abs/core/linhes-live/bin/gen_fstab +++ /dev/null @@ -1,122 +0,0 @@ -#! /bin/sh -# -# gen_fstab - make new fstab for larch live system based on detected devices -# -# Author: Michael Towers <gradgrind[at]online[dot]de> -# -# This file is part of the larch project. -# -# larch is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# larch is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with larch; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -#---------------------------------------------------------------------------- -# 2007.12.17 - -# Note that the results are, by default, not copied into place -# They end up here: -DEST="/tmp/fstab" -MNT="/tmp/mnt" - -# However, passing '-l' as command-line option will install them. -# The old fstab will then be backed up to fstab~. -LOAD="" -if [ "$1" = "-l" ]; then LOAD="-l"; fi - -if [ -n "$( df | grep " ${MNT}" )" ]; then - echo "ERROR: Mounted filesystem at/within ${MNT}" - exit 1 -fi -mkdir -p ${MNT} -rm -rf ${MNT}/* - -tmpfile="/tmp/fstab2" -: >${tmpfile} - -echo "# fstab generated by gen_fstab" >${DEST} -echo "#<file system> <dir> <type> <options> <dump> <pass>" >>${DEST} -echo >>${DEST} - -echo "none /dev/pts devpts defaults 0 0" >>${DEST} -echo "none /dev/shm tmpfs defaults 0 0" >>${DEST} -echo >>${DEST} - -# Get all other partitions -sfdisk -d | grep "^/dev/" | sed "s|\(.*\):.*Id=\(..\).*|\1 \2|" | \ - while read dev id; do - # Ignore if id is "Extended" or "LVM", these are not usable partitions - if [ "${id}" = "5" -o "${id}" = "8e" ]; then continue; fi - # See if swap - if [ "${id}" = "82" ]; then - printf "%-12s %-12s %-8s defaults,noatime 0 0\n" \ - ${dev} swap swap >>${DEST} - continue - fi - removable="" - part=$( basename ${dev} ) - if [ $( cat /sys/block/${part:0:3}/removable 2>/dev/null ) -ne 0 ]; then - removable="_rmv" - fi - mountdir=${part}${removable} - printf "%-12s %-12s %-8s user,noauto,noatime 0 0\n" \ - ${dev} /mnt/${mountdir} auto >>${tmpfile} - mkdir -p ${MNT}/${mountdir} - done - -# LVM -for lvmd in $( ls /dev/mapper 2>/dev/null | grep -v control ); do - printf "%-30s %-22s %-8s user,noauto,noatime 0 0\n" \ - /dev/mapper/${lvmd} /mnt/${lvmd} auto >>${tmpfile} - mkdir -p ${MNT}/${lvmd} -done - -echo >>${DEST} -cat ${tmpfile} >>${DEST} -rm ${tmpfile} -echo >>${DEST} - -# CD devices -for dev in $( cat /proc/sys/dev/cdrom/info 2>/dev/null | head -n 3 | \ - tail -n 1 | cut -d ":" -f 2 ); do - mountdir="${dev}_cd" - mkdir ${MNT}/${mountdir} - printf "%-12s %-12s %-8s user,noauto,exec,unhide 0 0\n" \ - /dev/${dev} /mnt/${mountdir} auto >>${DEST} -done - -echo >>${DEST} -echo "# This would do for a floppy" >>${DEST} -echo "#/dev/fd0 /mnt/floppy vfat,ext2 rw,user,noauto 0 0" >>${DEST} -echo "# + mkdir /mnt/floppy" >>${DEST} -echo >>${DEST} -echo "# E.g. for USB storage:" >>${DEST} -echo "#/dev/sdb1 /mnt/usb auto rw,user,noauto 0 0" >>${DEST} -echo "# + mkdir /mnt/usb" >>${DEST} - -if [ -n "${LOAD}" ]; then - # test if the script is started by root user. If not, exit - if [ $UID -ne 0 ]; then - echo "Only root can run ${APP}"; exit 1 - fi - - cp -b ${DEST} /etc/fstab - # Delete removeable mount points which are not currently mounted - for m in $( ls /mnt | grep ^[hs]d ); do - if [ -z "$( df | grep " /mnt/${m}$" )" ]; then - rmdir /mnt/${m} - fi - done - for m in $( ls ${MNT} ); do - mkdir -p /mnt/${m} - done -fi diff --git a/abs/core/linhes-live/bin/km b/abs/core/linhes-live/bin/km deleted file mode 100755 index 386d966..0000000 --- a/abs/core/linhes-live/bin/km +++ /dev/null @@ -1,76 +0,0 @@ -#!/bin/sh -# $Id: km,v 1.2 2005/12/13 04:14:53 judd Exp $ -# Modified by gradgrind to deal only with i386 keymaps -# and BASEDIR changed -# - also saves results to /etc/rc.conf - -# test if the script is started by root user. If not, exit -if [ $UID -ne 0 ]; then - echo "This should be run as root"; exit 1 -fi - -ANSWER="/tmp/.km" -BASEDIR="/usr/share/kbd" - -domenu() -{ - menutype=$1 ; shift - text=$1 ; shift - height=$1 ; shift - width=$1 ; shift - mheight=$1 ; shift - - dialog --cancel-label "Skip" --$menutype "$text" $height $width $mheight $* -} - -if [ ! -d $BASEDIR/keymaps ]; then - echo "Cannot load keymaps, as none were found in $BASEDIR/keymaps" >&2 - exit 1 -else - echo "Scanning for keymaps..." - KEYMAPS= - for t in qwerty qwertz azerty dvorak; do - for i in `find $BASEDIR/keymaps/i386/$t -follow -name "*.gz"`; do - fn=`echo $i | sed "s|$BASEDIR/keymaps/i386/||"` - KEYMAPS="$KEYMAPS $fn -" - done - done - domenu menu "Select A Keymap" 22 60 16 $KEYMAPS 2>$ANSWER - keymap=`cat $ANSWER` -fi - -if [ ! -d $BASEDIR/consolefonts ]; then - echo "Cannot load consolefonts, as none were found in $BASEDIR/consolefonts" >&2 -else - echo "Scanning for fonts..." - FONTS= - for i in `find $BASEDIR/consolefonts -follow -name "*.gz"`; do - fn=`echo $i | sed "s|$BASEDIR/consolefonts/||"` - FONTS="$FONTS $fn -" - done - domenu menu "Select A Console Font" 22 60 16 $FONTS 2>$ANSWER - font=`cat $ANSWER` -fi - -if [ "$keymap" ]; then - echo "Loading keymap: $keymap" - loadkeys -q $BASEDIR/keymaps/i386/$keymap - sed -i "s|^KEYMAP=.*|KEYMAP=\"$( echo $keymap | \ - cut -d'.' -f1 )\"|" /etc/rc.conf -fi - -if [ "$font" ]; then - echo "Loading font: $font" - for i in `seq 1 4`; do - if [ -d /dev/vc ]; then - setfont $BASEDIR/consolefonts/$font -C /dev/vc/${i} - else - setfont $BASEDIR/consolefonts/$font -C /dev/tty${i} - fi - done - sed -i "s|^CONSOLEFONT=.*|CONSOLEFONT=\"$( echo $font | \ - cut -d'.' -f1 )\"|" /etc/rc.conf -fi - -exit 0 - diff --git a/abs/core/linhes-live/etc/live-shutdown b/abs/core/linhes-live/etc/live-shutdown deleted file mode 100644 index b6a8378..0000000 --- a/abs/core/linhes-live/etc/live-shutdown +++ /dev/null @@ -1,90 +0,0 @@ -# Functions used by rc.shutdown -# Modified versions for linhes live systems - -f_saveclock () -{ - : -} - -f_swapoff () -{ - ############################# Include session saving functions -# . /opt/linhes-live/session-save/shutdown2 -# if [ -f /tmp/checkse ]; then -# . /tmp/checkse -# else -# checkse -# fi - - if [ -n "${saving}" ] && ! session_save; then - echo - echo "If you know what you are doing, you may be able to recover" - echo "something from this unpleasant situation." - echo - echo "You may use the command line to investigate further ..." - echo - echo "When finished please enter 'exit', the shutdown process will" - echo "then continue." - sh -i - fi - - ############################# - - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - bootdev=`cat /.livesys/bootdevice` - echo "Boot device was $bootdev" - #bootdev=`basename $bootdev` - for i in `ls /dev/cd/*` - do - cdrom=`readlink -f $i` - if [ x$cdrom = x$bootdev ] - then - ejectdev=$cdrom - break - fi - - done - lspci |grep -q VMware - if [ ! $? = 0 ] - then - if [ -n "${ejectdev}" ] - then - echo "Ejecting CD $ejectdev" - eject ${ejectdev} - echo "========================================" - echo "Tray will retract after 10 seconds" - for timer in `seq -w 10 -1 0` - do - #echo -n $timer '\x08' - echo -ne "\t"$timer '\010\010\010\010' - sleep 1 - done - echo - echo "========================================" - eject -t ${ejectdev} - echo - echo "It's safe to switch the computer off now" - #echo -ne "Press Enter to continue" - #read junk - else - echo "Boot device is not a cdrom, no need to eject" - fi - else - echo "VMWARE detected, not ejecting the CD" - fi -} -#Preloads these commands so we can eject the CD. -# -seq --help >/dev/null 2>&1 -eject --help >/dev/null 2>&1 -halt --help >/dev/null 2>&1 -poweroff --help >/dev/null 2>&1 -reboot --help >/dev/null 2>&1 - -# End diff --git a/abs/core/linhes-live/etc/live-sysinit b/abs/core/linhes-live/etc/live-sysinit deleted file mode 100644 index 40edad9..0000000 --- a/abs/core/linhes-live/etc/live-sysinit +++ /dev/null @@ -1,73 +0,0 @@ -# Functions used by rc.sysinit -# Modified versions for linhes live systems - -f_header () -{ - cR='\e[31m' cY='\e[1;33m' cN='\e[0m' cW='\e[1;37m' - echo " " - printsep - printf " ${cR}LinHes ${cY}Installation${cN}/${cY}Live${cW} CDROM${cN}. " - printsep - echo " " -} - -f_fscheck () -{ - stat_busy "Initializing /etc/mtab" - #/bin/mount -n -o remount,rw / - - /bin/rm -f /etc/mtab* - - # Make entries for aufs/unionfs, tmpfs and live medium in /etc/mtab - grep "^aufs */ " /proc/mounts >>/etc/mtab - grep "^unionfs */ " /proc/mounts >>/etc/mtab - grep "^tmpfs */.livesys " /proc/mounts >>/etc/mtab - if [ -d /.livesys/medium/live ]; then - grep " /.livesys/medium " /proc/mounts >>/etc/mtab - fi - - f_mountlocal - stat_done - - if [ -z "$( cat /etc/fstab | grep "^#KEEP" )" ]; then - stat_busy "Generating fresh /etc/fstab" - /opt/linhes-live/bin/gen_fstab -l - stat_done - fi - - # now mount all the local filesystems - stat_busy "Mounting Local Filesystems" - /bin/mount -a -t $NETFS - stat_done -} - -f_swapon () -{ - #+*** Copy session-save flag-file (if it exists) - [ -f /live/nosave ] && cp /live/nosave /.livesys - #-*** - - #*** Conditional swap activation - if [ -e /.livesys/swapon ]; then - status "Activating Swap" /sbin/swapon -a - fi -} -f_loadmodules() -{ - CMDLINE=$(cat /proc/cmdline) - echo $CMDLINE | grep -q modules - if [ $? -eq 0 ] - then - TEMPVAR=${CMDLINE#* modules=} - CMDMODULES=${TEMPVAR%% *} - mymod=`echo $CMDMODULES|/bin/sed 's|-|_|g' |/bin/sed 's|,| |g'` - stat_busy "Loading CMD module" - for mod in $mymod - do - /sbin/modprobe $mod - done - stat_done - fi - - -} diff --git a/abs/core/linhes-live/etc/loginroot b/abs/core/linhes-live/etc/loginroot deleted file mode 100755 index e3153c6..0000000 --- a/abs/core/linhes-live/etc/loginroot +++ /dev/null @@ -1,3 +0,0 @@ -#! /bin/sh -login -f root -# End diff --git a/abs/core/linhes-live/etc/rc.shutdown-live b/abs/core/linhes-live/etc/rc.shutdown-live deleted file mode 100755 index 79eae47..0000000 --- a/abs/core/linhes-live/etc/rc.shutdown-live +++ /dev/null @@ -1,168 +0,0 @@ -#!/bin/bash -# -# /etc/rc.shutdown -# - -### -# Based on initscripts 2008.05-1 -### - -. /etc/rc.conf -. /etc/rc.d/functions - -############################################################### -### These functions have been separated out, so that they can be -### replaced in linhes live systems. - -f_saveclock () -{ - stat_busy "Saving System Clock" - if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then - /bin/rm -f /etc/localtime - /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime - fi - - HWCLOCK_PARAMS="--systohc" - if [ "$HARDWARECLOCK" = "UTC" ]; then - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc" - else - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime" - fi - if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa" - fi - /sbin/hwclock $HWCLOCK_PARAMS - stat_done -} - -f_swapoff () -{ - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - stat_busy "Remounting Root Filesystem Read-only" - /bin/mount -n -o remount,ro / - stat_done -} - -############################################################### - -### Override above functions if running linhes live system -[ -f /etc/live-shutdown ] && . /etc/live-shutdown - -# avoid staircase effect -/bin/stty onlcr - -echo " " -printhl "Initiating Shutdown..." -echo " " - -# avoid NIS hanging syslog-ng on shutdown by unsetting the domainname -if [ -x /bin/domainname ]; then - /bin/domainname "" -fi - -if [ -x /etc/rc.local.shutdown ]; then - /etc/rc.local.shutdown -fi - -if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then - # Shutdown daemons - let i=${#DAEMONS[@]} - while [ $i -ge 0 ]; do - if [ "${DAEMONS[$i]:0:1}" != '!' ]; then - ck_daemon ${DAEMONS[$i]#@} || /etc/rc.d/${DAEMONS[$i]#@} stop - fi - let i=i-1 - done - # find any leftover daemons and shut them down in reverse order - if [ -d /var/run/daemons ]; then - for daemon in $(/bin/ls -1t /var/run/daemons); do - /etc/rc.d/$daemon stop - done - fi -fi - -# Terminate all processes -stat_busy "Sending SIGTERM To Processes" -/sbin/killall5 -15 &> /dev/null -/bin/sleep 5 -stat_done - -stat_busy "Sending SIGKILL To Processes" -/sbin/killall5 -9 &> /dev/null -/bin/sleep 1 -stat_done - -stat_busy "Saving Random Seed" -/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null -stat_done - -#F Save system time -f_saveclock - -# removing psmouse module to fix some reboot issues on newer laptops -/sbin/modprobe -r psmouse >/dev/null 2>&1 - -# Write to wtmp file before unmounting -/sbin/halt -w - -#F Deactivate swaps -f_swapoff - -stat_busy "Unmounting Filesystems" -/bin/umount -a -t noramfs,notmpfs,nosysfs,noproc -stat_done - -# Kill non-root encrypted partition mappings -if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then - stat_busy "Deactivating encrypted volumes:" - CS=/sbin/cryptsetup.static - do_uncrypt() { - if [ $# -ge 3 ]; then - stat_append "${1}.." - $CS remove $1 >/dev/null 2>&1 - if [ $? -ne 0 ]; then - stat_append "failed " - else - stat_append "ok " - fi - fi - } - while read line; do - eval do_uncrypt "$line" - done </etc/crypttab - stat_done -fi - -if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then - if [ -x /sbin/lvm -a -d /sys/block ]; then - stat_busy "Deactivating LVM2 groups" - /sbin/lvm vgchange --ignorelockingfailure -an >/dev/null 2>&1 - stat_done - fi -fi - -#F Remount / ro -f_remountro -#Eject the CD - -# Power off or reboot -if [ "$RUNLEVEL" = "0" ]; then - printsep - printhl "${C_H2}POWER OFF" - /sbin/poweroff -d -f -h -i -else - printsep - printhl "${C_H2}REBOOTING" - # if kexec is installed and a kernel is loaded, use it - [ -x /sbin/kexec ] && /sbin/kexec -e > /dev/null 2>&1 - /sbin/reboot -d -f -i -fi - -# vim: set ts=2 sw=2 noet: -# End diff --git a/abs/core/linhes-live/etc/rc.sysinit-live b/abs/core/linhes-live/etc/rc.sysinit-live deleted file mode 100755 index afdc2ae..0000000 --- a/abs/core/linhes-live/etc/rc.sysinit-live +++ /dev/null @@ -1,469 +0,0 @@ -#!/bin/bash -# -# /etc/rc.sysinit -# - -### -# Based on initscripts 2008.05-1 -### - -. /etc/rc.conf -. /etc/rc.d/functions - -############################################################### -### These functions have been separated out, so that they can be -### replaced in linhes live systems. - -f_header () -{ - echo " " - printhl "Arch Linux $C_OTHER(${C_H2}Core Dump$C_OTHER)\n" - printhl "${C_H2}http://www.archlinux.org" - printhl "Copyright 2002-2007 Judd Vinet" - printhl "Copyright 2007-2008 Aaron Griffin" - printhl "Distributed under the GNU General Public License (GPL)" - printsep -} - -f_fscheck () -{ - status "Mounting Root Read-only" /bin/mount -n -o remount,ro / - - if [ -x /sbin/fsck ]; then - stat_busy "Checking Filesystems" - if /bin/grep -qw quiet /proc/cmdline; then - /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1 - else - /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null - fi - fsckret=$? - if [ ${fsckret} -gt 1 ]; then - stat_fail - if [ $((${fsckret}&2)) -eq 2 ]; then - echo - echo "********************** REBOOT REQUIRED *********************" - echo "* *" - echo "* The system will be rebooted automatically in 15 seconds. *" - echo "* *" - echo "************************************************************" - echo - /bin/sleep 15 - else - echo - echo "***************** FILESYSTEM CHECK FAILED ****************" - echo "* *" - echo "* Please repair manually and reboot. Note that the root *" - echo "* file system is currently mounted read-only. To remount *" - echo "* it read-write type: mount -n -o remount,rw / *" - echo "* When you exit the maintenance shell the system will *" - echo "* reboot automatically. *" - echo "* *" - echo "************************************************************" - echo - /sbin/sulogin -p - fi - echo "Automatic reboot in progress..." - /bin/umount -a - /bin/mount -n -o remount,ro / - /sbin/reboot -f - exit 0 - fi - stat_done - fi - - stat_busy "Mounting Local Filesystems" - /bin/mount -n -o remount,rw / - /bin/rm -f /etc/mtab* - # make sure / gets written to /etc/mtab - /bin/mount -o remount,rw / - - f_mountlocal - stat_done -} - -f_mountlocal () -{ - # Write /proc, /sys and /dev to /etc/mtab - if [ -e /proc/mounts ]; then - /bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab - fi - # now mount all the local filesystems - /bin/mount -a -t $NETFS -} - -f_swapon () -{ - status "Activating Swap" /sbin/swapon -a -} - -############################################################### - -### Override above functions if running linhes live system -[ -f /etc/live-sysinit ] && . /etc/live-sysinit - -#F Print header -f_header - -# mount /proc, /sys and our RAM /dev -/bin/mount -n -t ramfs none /dev -/bin/mount -n -t proc none /proc -/bin/mount -n -t sysfs none /sys - -# Create our default nodes that minilogd may need -/bin/mknod /dev/null c 1 3 -/bin/mknod /dev/zero c 1 5 -/bin/mknod /dev/console c 5 1 - -# More initial /dev setup that udev doesn't do -/bin/ln -snf /proc/self/fd /dev/fd -/bin/ln -snf /proc/self/fd/0 /dev/stdin -/bin/ln -snf /proc/self/fd/1 /dev/stdout -/bin/ln -snf /proc/self/fd/2 /dev/stderr -/bin/ln -snf /proc/kcore /dev/core -/bin/mkdir /dev/pts -/bin/mkdir /dev/shm - -# start up our mini logger until syslog takes over -/sbin/minilogd - -# anything more serious than KERN_WARNING goes to the console -# 'verbose' cmdline parameter enables more messages -if /bin/grep -q " verbose" /proc/cmdline; then - /bin/dmesg -n 8 -else - /bin/dmesg -n 3 -fi - -# enable rtc access -/sbin/modprobe rtc-cmos >/dev/null 2>&1 -RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}" -if [ -n "$RTC_MAJOR" ]; then - /bin/mkdir /dev/misc/ - /bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0 - /bin/ln -s /dev/misc/rtc0 /dev/rtc -fi - -HWCLOCK_PARAMS="--hctosys" -if [ "$HARDWARECLOCK" = "UTC" ]; then - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc" -else - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime" -fi -if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa" -fi - -# Set clock early to fix some bugs with filesystem checks -# Clock is set again later to match rc.conf -if [ -f /etc/localtime ]; then - /sbin/hwclock $HWCLOCK_PARAMS --noadjfile -fi - -echo > /proc/sys/kernel/hotplug - -if [ -x /sbin/udevadm -a -d /sys/block ]; then - # We have udev and /sys appears to be mounted, use UDev - #status "Starting UDev Daemon" /etc/start_udev init - - stat_busy "Starting UDev Daemon" - /sbin/udevd --daemon - stat_done -else - # Static /dev, our last resort - status "Using static /dev filesystem" true -fi - -# Load modules from the MODULES array defined in rc.conf -if ! [ "$load_modules" = "off" ]; then - if [ -f /proc/modules ]; then -############Added by jm to load modules from /proc/cmdline - f_loadmodules -############## - stat_busy "Loading Modules" - for mod in "${MODULES[@]}"; do - if [ "$mod" = "${mod#!}" ]; then - /sbin/modprobe $mod - fi - done - stat_done - fi - if [ -d /proc/acpi ]; then - stat_busy "Loading standard ACPI modules" - ACPI_MODULES="ac battery button fan processor thermal" - k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')" - j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')" - #add disabled MODULES (!) to blacklist - much requested feature - for m in ${j}; do - [ "$m" != "${m#!}" ] && k="${k} ${m#!}" - done - # add disablemodules= from commandline to blacklist - k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')" - for n in ${ACPI_MODULES}; do - if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then - /sbin/modprobe $n > /dev/null 2>&1 - fi - done - stat_done - fi -fi - -# run udev uevents -if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then - #status "Loading UDev uevents" /etc/start_udev uevents - stat_busy "Loading UDev uevents" - udevstart="$(/bin/date +%s%0N)" - /sbin/udevadm trigger - /sbin/udevadm settle - stat_done - udevend="$(/bin/date +%s%0N)" - printhl " UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms" -fi - -# bring up the loopback interface -if [ -d /sys/class/net/lo ]; then - stat_busy "Bringing up loopback interface" - /sbin/ifconfig lo 127.0.0.1 up - if [ $? -ne 0 ]; then - stat_fail - else - stat_done - fi -fi - -# If necessary, find md devices and manually assemble RAID arrays -if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then - # udev won't create these md nodes, so we do it ourselves - for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do - path=$(echo $dev | /bin/sed 's|/[^/]*$||') - node=$(echo $dev | /bin/sed "s|^$path/||") - minor=$(echo $node | /bin/sed 's|^[^0-9]*||') - [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor - done - status "Activating RAID arrays" /sbin/mdadm --assemble --scan -fi - -if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then - if [ -x /sbin/lvm -a -d /sys/block ]; then - # Kernel 2.6.x, LVM2 groups - /sbin/modprobe -q dm-mod 2>/dev/null - stat_busy "Activating LVM2 groups" - /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null - /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null - if [ $? -ne 0 ]; then - stat_fail - else - stat_done - fi - fi -fi - -# Set up non-root encrypted partition mappings -if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then - /sbin/modprobe -q dm-mod 2>/dev/null - stat_busy "Unlocking encrypted volumes:" - csfailed=0 - CS=/sbin/cryptsetup.static - do_crypt() { - if [ $# -ge 3 ]; then - cname="$1" - csrc="$2" - cpass="$3" - shift 3 - copts="$*" - stat_append "${cname}.." - # For some fun reason, the parameter ordering varies for - # LUKS and non-LUKS devices. Joy. - if [ "${cpass}" = "SWAP" ]; then - # This is DANGEROUS! The only possible safety check - # is to not proceed in case we find a LUKS device - # This may cause dataloss if it is not used carefully - if $CS isLuks $csrc 2>/dev/null; then - false - else - $CS -d /dev/urandom $copts create $cname $csrc >/dev/null - if [ $? -eq 0 ]; then - stat_append "creating swapspace.." - /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null - fi - fi - elif [ "${cpass}" = "ASK" ]; then - printf "\nOpening '${cname}' volume:\n" - - if $CS isLuks $csrc 2>/dev/null; then - $CS $copts luksOpen $csrc $cname < /dev/console - else - $CS $copts create $cname $csrc < /dev/console - fi - elif [ "${cpass:0:1}" != "/" ]; then - if $CS isLuks $csrc 2>/dev/null; then - echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null - else - echo "$cpass" | $CS $copts create $cname $csrc >/dev/null - fi - else - if $CS isLuks $csrc 2>/dev/null; then - $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null - else - $CS -d $cpass $copts create $cname $csrc >/dev/null - fi - fi - if [ $? -ne 0 ]; then - csfailed=1 - stat_append "failed " - else - stat_append "ok " - fi - fi - } - while read line; do - eval do_crypt "$line" - done </etc/crypttab - if [ $csfailed -eq 0 ]; then - stat_done - else - stat_fail - fi - # Maybe someone has LVM on an encrypted block device - if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then - if [ -x /sbin/lvm -a -d /sys/block ]; then - /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null - /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null - fi - fi -fi - -FORCEFSCK= -[ -f /forcefsck ] && FORCEFSCK="-- -f" -NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk" - -#F Check filesystems -f_fscheck - -#F Activate swaps -f_swapon - -stat_busy "Configuring System Clock" -if [ ! -f /var/lib/hwclock/adjtime ]; then - echo "0.0 0 0.0" > /var/lib/hwclock/adjtime -fi -if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then - /bin/rm -f /etc/localtime - /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime -fi - -/sbin/hwclock $HWCLOCK_PARAMS -stat_done - -if [ -f /var/run/random-seed ]; then - stat_busy "Initializing Random Seed" - /bin/cat /var/run/random-seed >/dev/urandom - stat_done -fi - -stat_busy "Removing Leftover Files" -/bin/rm -f /etc/nologin &>/dev/null -/bin/rm -f /etc/shutdownpid &>/dev/null -/bin/rm -f /var/lock/* &>/dev/null -/bin/rm -rf /tmp/* /tmp/.* &>/dev/null -/bin/rm -f /forcefsck &>/dev/null -(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; ) -: > /var/run/utmp -# Keep {x,k,g}dm happy with xorg -/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix -/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix -stat_done - -#status "Updating Shared Library Links" /sbin/ldconfig - -if [ "$HOSTNAME" != "" ]; then - status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME -fi - -# Set the NIS domain name, if necessary -[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname -if [ "$NISDOMAINNAME" != "" ]; then - status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME -fi - -status "Updating Module Dependencies" /sbin/depmod -A - -# Flush old locale settings -: >/etc/profile.d/locale.sh -/bin/chmod 755 /etc/profile.d/locale.sh -# Set user defined locale -[ -z "$LOCALE" ] && LOCALE="en_US" -stat_busy "Setting Locale: $LOCALE" -echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh -stat_done - -if echo "$LOCALE" | /bin/grep -qi utf ; then - stat_busy "Setting Consoles to UTF-8 mode" - # UTF-8 consoles are default since 2.6.24 kernel - # this code is needed not only for older kernels, - # but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8. - /usr/bin/kbd_mode -u - for i in $(/usr/bin/seq 0 63); do - printf "\e%%G" > /dev/vc/${i} - done - # the $CONSOLE check helps us avoid this when running scripts from cron - echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh - stat_done - [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP -else - stat_busy "Setting Consoles to legacy mode" - # make non-UTF-8 consoles work on 2.6.24 and newer kernels - /usr/bin/kbd_mode -a - for i in $(/usr/bin/seq 0 63); do - printf "\e%%@" > /dev/vc/${i} - done - # the $CONSOLE check helps us avoid this when running scripts from cron - echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh - stat_done - [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP -fi - -if [ -n "$CONSOLEFONT" ]; then - stat_busy "Loading Console Font: $CONSOLEFONT" - #CONSOLEMAP in UTF-8 shouldn't be used - if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then - CONSOLEMAP="" - fi - for i in $(/usr/bin/seq 0 63); do - if [ -n "$CONSOLEMAP" ]; then - /usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1 - else - /usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1 - fi - done - if [ $? -ne 0 ]; then - stat_fail - else - for i in $(/usr/bin/seq 0 63); do - printf "\e(K" > /dev/vc/${i} - done - # the $CONSOLE check helps us avoid this when running scripts from cron - echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh - stat_done - fi -fi - -# Adding persistent network/cdrom generated rules -if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then - stat_busy "Adding persistent cdrom udev rules" - /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules - stat_done -fi -if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then - stat_busy "Adding persistent network udev rules" - /bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules - stat_done -fi - -# Save our dmesg output from this boot -if [ -f /var/log/dmesg.log ]; then - /bin/rm /var/log/dmesg.log -fi -/bin/dmesg > /var/log/dmesg.log - -# vim: set ts=2 noet: -# End diff --git a/abs/core/linhes-live/etc/ulogin b/abs/core/linhes-live/etc/ulogin deleted file mode 100755 index 085c431..0000000 --- a/abs/core/linhes-live/etc/ulogin +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/bash - -# ulogin - A script for autologin of a selected user (and more) -#----------------------------------------------------------------- -# 2008.04.06 - -user=$( cat /tmp/newuser 2>/dev/null ) - -rm -f /tmp/newuser -rm -f /tmp/xlogout - -if [ -n "${user}" ]; then - login -f ${user} -else - # offer choice of user - ulist="$( cat /etc/passwd | grep ':/home/.*sh$' )" - echo -e "\nLogin a user or quit:" - echo " 0 : root" - echo " 1 : REBOOT" - echo " 2 : HALT" - - i=2 - for entry in ${ulist}; do - i=$(( ${i} + 1 )) - user="$( echo ${entry} | cut -d':' -f1 )" - users[${i}]=${user} - printf "%4d : %s\n" ${i} ${user} - done - while true; do - read -p "Enter a number from 0 to ${i} : " n - if [ "${n}" = 0 ]; then - login -f root - elif [ "${n}" = 1 ]; then - exec reboot - elif [ "${n}" = 2 ]; then - exec halt - elif [ -n "$( echo "${n}" | grep "^[0-9]\+$" )" ] && \ - [ -n "${users[${n}]}" ]; then - login -f ${users[${n}]} - else - echo " *** Invalid choice ..." - continue - fi - break - done -fi - -if grep "r" /tmp/xlogout &>/dev/null; then - reboot -elif grep "h" /tmp/xlogout &>/dev/null; then - halt -fi - -# This file is only needed for shutting down -rm -f /tmp/checkse - -# End diff --git a/abs/core/linhes-live/lib/initcpio/gen_larch_init b/abs/core/linhes-live/lib/initcpio/gen_larch_init deleted file mode 100755 index d834e8f..0000000 --- a/abs/core/linhes-live/lib/initcpio/gen_larch_init +++ /dev/null @@ -1,12 +0,0 @@ -#! /bin/bash - -# gen_larch_init -# -# Author: Michael Towers <gradgrind[at]online[dot]de> - -# Create an initramfs for a larch live system -# $1 - kernel version - -# The cpio.gz image is generated in larch.img - -/sbin/mkinitcpio -c /lib/initcpio/mkinitcpio.conf -k $1 -g larch.img diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch1 b/abs/core/linhes-live/lib/initcpio/hooks/larch1 deleted file mode 100644 index 88ccc3e..0000000 --- a/abs/core/linhes-live/lib/initcpio/hooks/larch1 +++ /dev/null @@ -1,125 +0,0 @@ -# vim: set ft=sh: - -# larch1 - live 'hook' for mkinitcpio: set up tmpfs and find boot device - -# Author: Michael Towers (gradgrind) <mt.42@web.de> -# -# This file is part of the larch project. -# -# larch is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# larch is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with larch; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -#---------------------------------------------------------------------------- -#2008.02.11 - -# Replacement for msg which includes leading and trailing spaces -msg_ () { [ "${quiet}" != "y" ] && echo "$@"; } - -# Try to mount a disk, partition or cdrom and look for the file -# 'larchboot' in the /larch directory. -# If LiveCD system found in the device, return 0, else return 1 -# and leave the device mounted. -# $1 = device name (e.g. "/dev/hda2") -# $2 = directory where devices will be mounted -# -test_live_data_dir () -{ - /bin/mount -r -t iso9660 "$1" $2 >/dev/null 2>/dev/null || \ - /bin/mount -r -t vfat -o noatime,nodiratime "$1" $2 >/dev/null 2>/dev/null || \ - /bin/mount -r -t ext2 -o noatime,nodiratime "$1" $2 >/dev/null 2>/dev/null - if [ $? -eq 0 ]; then - if [ -f "$2/larch/larchboot" ]; then - LDEV="$1" - msg_ " ... found at $1" - return 0 - else - /bin/umount $2 2>/dev/null - msg_ " ... $1 mounted, but no 'larch/larchboot' found" - fi - else - msg_ " ... not $1" - fi - return 1 -} - -run_hook () -{ - msg_ ":: Creating writeable filesystem (tmpfs)" - /bin/mkdir "/tfs" - # Boot option copy-to-ram (c2r) - if [ "${c2r}" = "y" ]; then - TFSSIZE="90%" - else - TFSSIZE="60%" - fi - /bin/mount -t tmpfs -o "size=${TFSSIZE}" tmpfs "/tfs" - - # Directory for test mounts (and then for live CD) - cdmount="/livecd" - /bin/mkdir "${cdmount}" - - # look for livecd data directory, first try ${root} - LDEV="${root}" - if [ "x${LDEV}" != "x" ]; then - /bin/mount -r -t iso9660 "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null || \ - /bin/mount -r -t vfat -o noatime,nodiratime "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null || \ - /bin/mount -r -t ext2 -o noatime,nodiratime "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null - if [ $? -eq 0 ]; then - if [ -d "${cdmount}/larch" ]; then - msg_ ":: larch system at ${LDEV}" - else - /bin/umount "${cdmount}" 2>/dev/null - echo "!! No larch system at ${LDEV}" - LDEV="" - fi - else - echo "!! Couldn't mount ${LDEV}" - LDEV="" - fi - fi - - # then try cdroms - if [ "x${LDEV}" = "x" ]; then - msg_ ":: Looking for boot device" - cdroms=$( /bin/cat /proc/sys/dev/cdrom/info | { while read a b c; do - if [ "${a}" = "drive" -a "${b}" = "name:" ]; then - echo "${c}" - break - fi - done - } ) - for i in ${cdroms}; do - test_live_data_dir "/dev/${i}" "${cdmount}" - if [ $? -eq 0 ]; then break; fi - done - fi - - # test USB devices (and disks) repeatedly until timed out - if [ "x${LDEV}" = "x" ]; then - msg_ ":: Searching for usb (and disk) devices .." - for i in 1 2 3 4 5; do - msg_ " :wait ${i} :::" - /bin/sleep ${i} - for d in /dev/sd[a-z][0-9]*; do - test_live_data_dir "${d}" "${cdmount}" - if [ $? -eq 0 ]; then break 2; fi - done - msg_ ":: Searching for usb cdroms .." - for d in /dev/sr[0-9]*; do - test_live_data_dir "${d}" "${cdmount}" - if [ $? -eq 0 ]; then break 2; fi - done - done - fi -} diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch2 b/abs/core/linhes-live/lib/initcpio/hooks/larch2 deleted file mode 100644 index 74b4e64..0000000 --- a/abs/core/linhes-live/lib/initcpio/hooks/larch2 +++ /dev/null @@ -1,33 +0,0 @@ -# larch2 - live 'hook' for mkinitcpio: unionfs specific - -# Author: Michael Towers (gradgrind) <mt.42@web.de> -# -# This file is part of the larch project. -# -# larch is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# larch is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with larch; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -#---------------------------------------------------------------------------- -#2007.12.13 - -run_hook () -{ - #!!! --- unionfs specific - # Need unionfs module - /bin/modprobe unionfs - ovlmnt="ro" - bropt="dirs=" - sqfmnt="ro" - utype="unionfs" -} diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs b/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs deleted file mode 100644 index ac8e40b..0000000 --- a/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs +++ /dev/null @@ -1,33 +0,0 @@ -# larch2_aufs - live 'hook' for mkinitcpio: aufs specific - -# Author: Michael Towers (gradgrind) <mt.42@web.de> -# -# This file is part of the larch project. -# -# larch is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# larch is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with larch; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -#---------------------------------------------------------------------------- -# 2008.02.29 - -run_hook () -{ - #!!! --- aufs specific - # Need aufs module - /bin/modprobe aufs - ovlmnt="rr+wh" - sqfmnt="rr" - bropt="br:" - utype="aufs" -} diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch3 b/abs/core/linhes-live/lib/initcpio/hooks/larch3 deleted file mode 100644 index b301aa9..0000000 --- a/abs/core/linhes-live/lib/initcpio/hooks/larch3 +++ /dev/null @@ -1,196 +0,0 @@ -# larch3 - live 'hook' for mkinitcpio: -# deal with c2r, -# mount base system, -# load overlay, -# set up unioned root filesystem. -# Also manages overlay merging. - -# Author: Michael Towers <gradgrind[at]online[dot]de> -# -# This file is part of the larch project. -# -# larch is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# larch is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with larch; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -#---------------------------------------------------------------------------- -# 2008.04.04 - -run_hook () -{ - if [ "x${LDEV}" = "x" ]; then - err "Sorry, couldn't find boot medium ..." - break="y" - return - fi - - /sbin/modprobe loop - - # Path to compressed base system - sysSqf=${cdmount}/system.sqf - - ovlpath=${cdmount} - - # A possibility to use alternative files: - if [ -f ${cdmount}/larch/boot-init ]; then - . ${cdmount}/larch/boot-init - fi - - # Path to compressed 'modifications' archive - modsSqf=${ovlpath}/mods.sqf - # Default overlay file and directory - overlay=${ovlpath}/overlay.ovl - - # Make union root - /bin/mkdir /union - - # Deal with new archives - if [ -f ${overlay}_ ]; then - /bin/mount -o remount,rw ${LDEV} ${cdmount} - /bin/mv ${overlay} ${overlay}~ - /bin/mv ${overlay}_ ${overlay} - - if [ -f ${modsSqf}_ ]; then - /bin/mv ${modsSqf} ${modsSqf}~ - /bin/mv ${modsSqf}_ ${modsSqf} - fi - /bin/mount -o remount,ro ${LDEV} ${cdmount} - fi - - # Boot option copy-to-ram (c2r) - if [ "${c2r}" = "y" ]; then - msg_ ":: Copying base system to RAM, this will take a while ..." - /bin/cat ${sysSqf} > /tfs/system.sqf - if [ $? -ne 0 ]; then - err "Sorry, not enough RAM" - break="y" - return - fi - sysSqf=/tfs/system.sqf - - msg_ ":: Copying mods archive to RAM, this might take a while ..." - /bin/cat ${modsSqf} > /tfs/mods.sqf - if [ $? -ne 0 ]; then - err "Sorry, not enough RAM" - break="y" - return - fi - modsSqf=/tfs/mods.sqf - - # force use of swap (if available) - :> /tfs/swapon - - elif [ "${swap}" = "y" ]; then - :> /tfs/swapon - fi - - msg_ ":: Mounting squashed images" - /bin/mkdir /tfs/system - #added sleep for 3 seconds, because well i don't know but it seems to fix things - sleep 3 - # The klibc mount command doesn't support '-o loop' - /bin/losetup /dev/loop0 ${sysSqf} - /bin/mount -r -t squashfs /dev/loop0 /tfs/system - - # Make stuff in 'system' available by providing the loader and - # library path - ldli=$( cd /tfs/system; echo lib/ld-linux*.so.2 ) - /bin/ln -s /tfs/system/${ldli} /${ldli} - export LD_LIBRARY_PATH=/tfs/system/lib:/tfs/system/usr/lib - - /bin/mkdir /tfs/mods - - # The klibc mount command doesn't support '-o loop' - /bin/losetup /dev/loop1 ${modsSqf} - /bin/mount -r -t squashfs /dev/loop1 /tfs/mods - - # Unpack the overlay - - msg_ ":: Initializing writable layer for union (overlay)" - /tfs/system/usr/bin/lzop -d < ${overlay} | \ - /tfs/system/bin/tar -C /tfs -xf - - - # Copy the installation tidy-up script (for removing custom live-only stuff), - # and any other files in 'larch/copy' directory - if [ -d ${ovlpath}/larch/copy ]; then - cd ${ovlpath}/larch/copy - for f in *; do - cat ${f} >/tfs/${f} - done - fi - - msg_ ":: Setting up union file system" - - layers="/tfs/overlay=rw:/tfs/mods=${ovlmnt}:/tfs/system=${sqfmnt}" - /bin/mount -t ${utype} -o ${bropt}${layers} ${utype} /union - - echo "${utype}" > /tfs/utype - - # Minimal device nodes needed before udev does its work - /bin/mkdir /union/dev - /bin/mknod /union/dev/console c 5 1 - /bin/mknod /union/dev/null c 1 3 - /bin/mknod /union/dev/zero c 1 5 - - # Make special directories - /bin/mkdir -m 1777 /union/tmp - /bin/mkdir /union/media - /bin/mkdir /union/sys - /bin/mkdir /union/proc - - # Make the tmpfs stuff accessible within the union - /bin/mkdir /union/.livesys - /bin/mount -o bind /tfs /union/.livesys - - /bin/mkdir /union/.livesys/medium - - /bin/mount -o bind /tfs/system /union/.livesys/system - /bin/mount -o bind /tfs/overlay /union/.livesys/overlay - /bin/mount -o bind ${cdmount} /union/.livesys/medium - - if [ "x${modsSqf}" != "x" ]; then - /bin/mount -o move /tfs/mods /union/.livesys/mods - fi - - # Remember the boot device - echo "${LDEV}" > /tfs/bootdevice - - if [ "${c2r}" = "y" ]; then - # Set flag to inform system of copy-to-ram - :> /tfs/c2r - - # Unmount boot device - /bin/umount ${cdmount} - fi - - msg_ ":: End of live system set-up" - - # Now some tweaks to alter 'init' actions from non-larch hooks, etc. - # Override rootdelay from usb hook - if [ "x${larchdelay}" = "x" ]; then - # To avoid spurious udevd pid numbers - export rootdelay=1 - else - # Allow adjustment via boot option - export rootdelay=${larchdelay} - fi - # root must be set to something or other, even though larch doesn't - # need it ... - export root="/dev/loop0" -} - -####### -# The actual root switch occurs later, when 'init' execs 'kinit'. -# I handle this by overwriting the 'kinit' binary with my own script. -# This will unmount dev, sys and proc and then exec run-init. -####### diff --git a/abs/core/linhes-live/lib/initcpio/install/larch1 b/abs/core/linhes-live/lib/initcpio/install/larch1 deleted file mode 100644 index 56baf48..0000000 --- a/abs/core/linhes-live/lib/initcpio/install/larch1 +++ /dev/null @@ -1,15 +0,0 @@ -install () -{ - MODULES="vfat isofs ext2 ext3 nls_cp437" - BINARIES="" - FILES="" - SCRIPT="larch1" -} - -help () -{ -cat<<HELPEOF - This hook deals with booting a larch live CD. It is the first larch hook, -creating a tmpfs and seeking the boot medium. -HELPEOF -} diff --git a/abs/core/linhes-live/lib/initcpio/install/larch2 b/abs/core/linhes-live/lib/initcpio/install/larch2 deleted file mode 100644 index a906227..0000000 --- a/abs/core/linhes-live/lib/initcpio/install/larch2 +++ /dev/null @@ -1,15 +0,0 @@ -install () -{ - MODULES="unionfs" - BINARIES="" - FILES="" - SCRIPT="larch2" -} - -help () -{ -cat<<HELPEOF - This hook deals with booting a larch live CD. It handles selection of the -desired unioning file system, here unionfs. -HELPEOF -} diff --git a/abs/core/linhes-live/lib/initcpio/install/larch2_aufs b/abs/core/linhes-live/lib/initcpio/install/larch2_aufs deleted file mode 100644 index 0e19de9..0000000 --- a/abs/core/linhes-live/lib/initcpio/install/larch2_aufs +++ /dev/null @@ -1,15 +0,0 @@ -install () -{ - MODULES="aufs" - BINARIES="" - FILES="" - SCRIPT="larch2_aufs" -} - -help () -{ -cat<<HELPEOF - This hook deals with booting a larch live CD. It handles selection of the -desired unioning file system, here aufs. -HELPEOF -} diff --git a/abs/core/linhes-live/lib/initcpio/install/larch3 b/abs/core/linhes-live/lib/initcpio/install/larch3 deleted file mode 100644 index 7dad03c..0000000 --- a/abs/core/linhes-live/lib/initcpio/install/larch3 +++ /dev/null @@ -1,18 +0,0 @@ -install () -{ - MODULES="squashfs loop reiserfs" - BINARIES="" - FILES="" - SCRIPT="larch3" -# add_file "/lib/initcpio/kinit" "/bin/kinit" ##### This doesn't work, so: - sed -i 's|.*/usr/lib/klibc/bin/kinit\.shared.*||' "${FILELIST}" - sed -i 's|/usr/lib/klibc/bin/kinit|/lib/initcpio/kinit|' "${FILELIST}" -} - -help () -{ -cat<<HELPEOF - This hook deals with booting a larch live CD. It is the last larch hook, -setting up the tmpfs root file system. -HELPEOF -} diff --git a/abs/core/linhes-live/lib/initcpio/kinit b/abs/core/linhes-live/lib/initcpio/kinit deleted file mode 100755 index 7c86f4b..0000000 --- a/abs/core/linhes-live/lib/initcpio/kinit +++ /dev/null @@ -1,6 +0,0 @@ -#! /bin/sh - -umount /sys -umount /proc -umount /dev -exec run-init -c /dev/console /union /sbin/init ${CMDLINE} diff --git a/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf b/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf deleted file mode 100644 index 79cca21..0000000 --- a/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf +++ /dev/null @@ -1,54 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES="piix ide_disk reiserfs" -MODULES="" - -# BINARIES -# This setting includes, into the CPIO image, and additional -# binaries a given user may wish. This is run first, so may -# be used to override the actual binaries used in a given hook. -# (Existing files are NOT overwritten is already added) -# BINARIES are dependancy parsed, so you may safely ignore libraries -#BINARIES="" - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in anyway. This is useful for config files. -# Some users may wish to include modprobe.conf for custom module options, -# like so: -# FILES="/etc/modprobe.conf" -FILES="" - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'modload' may be used in place of 'udev', but is not recommended -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -# This setup specifies all modules in the MODULES setting above. -# No raid, lvm, or encrypted root is needed. -# HOOKS="base" -# -# This setup will autodetect all modules for your system and should -# work as a sane default -# HOOKS="base udev autodetect ide scsi sata filesystems" -# -# This setup will generate a 'full' image which supports most systems. -# No autodetection is done. -# HOOKS="base udev ide scsi sata usb filesystems" -# -# This setup assembles an ide raid array with an encrypted root FS. -# Note: See 'mkinitcpio -H raid' for more information on raid devices. -# HOOKS="base udev ide filesystems raid encrypt" -# -# This setup loads an LVM volume group on a usb device. -# HOOKS="base udev usb filesystems lvm" -HOOKS="base udev pata scsi sata usb larch1 larch2___aufs___ larch3" |