1 files changed, 35 insertions, 36 deletions
diff --git a/abs/core/mdadm/mdadm_install b/abs/core/mdadm/mdadm_install
index b7a57ea..cf6159e 100644
--- a/abs/core/mdadm/mdadm_install
+++ b/abs/core/mdadm/mdadm_install
@@ -1,46 +1,45 @@
-# vim: set ft=sh:
-
-install ()
-{
-    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
-    BINARIES=""
-    FILES=""
-    SCRIPT="mdadm"
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
     # check if a custom mdadm.conf exists
     if grep -q ^ARRAY /etc/mdadm.conf; then
         echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
         add_file "/etc/mdadm.conf"
     fi
     add_binary "/sbin/mdassemble"
-    add_file "/lib/udev/rules.d/64-md-raid.rules"
+
+    add_runscript
 }
 
-help ()
-{
-cat<<HELPEOF
-  This hook loads the necessary modules for any raid root device,
-  and assembles the raid device when run.
-
-  If arrays are defined in /etc/mdadm.conf, the file will be used instead
-  of command line assembling.
-  
-  Command Line Setup:
-  - for raid arrays with persistent superblocks:
-    md=<md device no.>,dev0,dev1,...,devn
-    md=<md device no.>,uuid
-  - for partitionable raid arrays with persistent superblocks:
-    md=d<md device no.>,dev0,dev1,...,devn
-    md=d<md device no.>,uuid
-
-  Parameters:
-  - <md device no.> = the number of the md device: 
-    0 means md0, 1 means md1, ...
-  - <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
-                   or 0900878d:f95f6057:c39a36e9:55efa60a
-  Examples:
-  - md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
-    This will setup 2 md partitionable arrays.
-  - md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
-    This will setup 2 md arrays with persistent superblocks.
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for any raid root device,
+and assembles the raid device when run.
+
+If arrays are defined in /etc/mdadm.conf, the file will be used instead
+of command line assembling.
+
+Command Line Setup:
+- for raid arrays with persistent superblocks:
+  md=<md device no.>,dev0,dev1,...,devn
+  md=<md device no.>,uuid
+- for partitionable raid arrays with persistent superblocks:
+  md=d<md device no.>,dev0,dev1,...,devn
+  md=d<md device no.>,uuid
+
+Parameters:
+- <md device no.> = the number of the md device: 
+  0 means md0, 1 means md1, ...
+- <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+                 or 0900878d:f95f6057:c39a36e9:55efa60a
+Examples:
+- md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+  This will setup 2 md partitionable arrays.
+- md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+  This will setup 2 md arrays with persistent superblocks.
 HELPEOF
 }
+
+# vim: set ft=sh ts=4 sw=4 et: