diff options
Diffstat (limited to 'abs/core/php')
| -rw-r--r-- | abs/core/php/PKGBUILD | 472 | ||||
| -rw-r--r-- | abs/core/php/php.ini | 1304 |
2 files changed, 1460 insertions, 316 deletions
diff --git a/abs/core/php/PKGBUILD b/abs/core/php/PKGBUILD index 3a91cb1..404edc0 100644 --- a/abs/core/php/PKGBUILD +++ b/abs/core/php/PKGBUILD @@ -1,347 +1,187 @@ -# $Id: PKGBUILD 163752 2012-07-19 05:20:23Z pierre $ -# Maintainer: Pierre Schmitz <pierre@archlinux.de> - pkgbase=php -pkgname=('php' - 'php-cgi' - 'php-apache' - 'php-fpm' - 'php-embed' - 'php-pear' - 'php-enchant' - 'php-gd' - 'php-intl' - 'php-ldap' - 'php-mcrypt' - 'php-mssql' - 'php-odbc' - 'php-pgsql' - 'php-pspell' - 'php-snmp' - 'php-sqlite' - 'php-tidy' - 'php-xsl') -pkgver=5.4.5 -pkgrel=1 +pkgname=('php' 'php-cgi' 'php-pear') +pkgver=5.3.3 +pkgrel=9 +_suhosinver=${pkgver}-0.9.10 +pkgdesc='A high-level scripting language' arch=('i686' 'x86_64') license=('PHP') url='http://www.php.net' -makedepends=('apache' 'imap' 'postgresql-libs' 'libldap' 'libvpx' - 'sqlite' 'unixodbc' 'net-snmp' 'libzip' 'enchant' 'file' 'freetds' - 'libmcrypt' 'tidyhtml' 'aspell' 'libltdl' 'libpng' 'libjpeg' 'icu' - 'curl' 'libxslt' 'openssl' 'bzip2' 'db' 'gmp' 'freetype2') -source=("http://www.php.net/distributions/${pkgbase}-${pkgver}.tar.bz2" - 'php.ini.patch' 'apache.conf' 'rc.d.php-fpm' 'php-fpm.conf.in.patch' - 'logrotate.d.php-fpm' 'php-fpm.service' 'php-fpm.tmpfiles') -md5sums=('ffcc7f4dcf2b79d667fe0c110e6cb724' - '0b0bc7a917fc592bdf11dcd3c5c255e9' - 'dec2cbaad64e3abf4f0ec70e1de4e8e9' - '6d46667e00d65933ec0c958279c0a803' - '825e580dd5708d959b50944afa1b12b6' - 'f56b5bb7e93c802ae8519182fbea3387' - '86c73d481f3099e740e602869bacf637' - 'c60343df74f8e1afb13b084d5c0e47ed') +backup=('etc/php/php.ini') +install=php.install +depends=('glibc' 'readline' 'ncurses' 'libxml2' 'pcre') +#makedepends=('apache' 'imap' 'postgresql-libs' 'mysql' 'libldap' \ +# 'libpng' 'libjpeg' 'sqlite3' 'unixodbc' 'net-snmp' \ +# 'libmcrypt' 'tidyhtml' 'aspell' 'libtool' 'freetype2' 'libjpeg' \ +# 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' 'gdbm' 'db>=4.7') + +makedepends=('mysql' 'libpng' 'libjpeg' 'sqlite3' 'libmcrypt' 'libtool' \ + 'freetype2' 'libjpeg' 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' \ + 'gdbm' 'db>=4.8.26') +options=('emptydirs') +source=("http://museum.php.net/php5/${pkgname}-${pkgver}.tar.bz2" \ + "http://download.suhosin.org/suhosin-patch-${_suhosinver}.patch.gz" \ + 'php.ini' 'apache.conf') build() { - phpconfig="--srcdir=../${pkgbase}-${pkgver} \ - --config-cache \ - --prefix=/usr \ - --sysconfdir=/etc/php \ - --localstatedir=/var \ - --with-layout=GNU \ - --with-config-file-path=/etc/php \ - --with-config-file-scan-dir=/etc/php/conf.d \ - --disable-rpath \ - --mandir=/usr/share/man \ - --without-pear \ - " - - phpextensions="--enable-bcmath=shared \ - --enable-calendar=shared \ - --enable-dba=shared \ - --enable-exif=shared \ - --enable-ftp=shared \ - --enable-gd-native-ttf \ - --enable-intl=shared \ - --enable-mbstring \ - --enable-phar=shared \ - --enable-posix=shared \ - --enable-shmop=shared \ - --enable-soap=shared \ - --enable-sockets=shared \ - --enable-sysvmsg=shared \ - --enable-sysvsem=shared \ - --enable-sysvshm=shared \ - --enable-zip=shared \ - --with-bz2=shared \ - --with-curl=shared \ - --with-db4=/usr \ - --with-enchant=shared,/usr \ - --with-freetype-dir=/usr \ - --with-gd=shared \ - --with-gdbm \ - --with-gettext=shared \ - --with-gmp=shared \ - --with-iconv=shared \ - --with-icu-dir=/usr \ - --with-imap-ssl \ - --with-imap=shared \ - --with-jpeg-dir=/usr \ - --with-vpx-dir=/usr \ - --with-ldap=shared \ - --with-ldap-sasl \ - --with-mcrypt=shared \ - --with-mhash \ - --with-mssql=shared \ - --with-mysql-sock=/var/run/mysqld/mysqld.sock \ - --with-mysql=shared,mysqlnd \ - --with-mysqli=shared,mysqlnd \ - --with-openssl=shared \ - --with-pcre-regex=/usr \ - --with-pdo-mysql=shared,mysqlnd \ - --with-pdo-odbc=shared,unixODBC,/usr \ - --with-pdo-pgsql=shared \ - --with-pdo-sqlite=shared,/usr \ - --with-pgsql=shared \ - --with-png-dir=/usr \ - --with-pspell=shared \ - --with-snmp=shared \ - --with-sqlite3=shared,/usr \ - --with-tidy=shared \ - --with-unixODBC=shared,/usr \ - --with-xmlrpc=shared \ - --with-xsl=shared \ - --with-zlib \ - " - - EXTENSION_DIR=/usr/lib/php/modules - export EXTENSION_DIR - PEAR_INSTALLDIR=/usr/share/pear - export PEAR_INSTALLDIR + phpconfig="--srcdir=${srcdir}/${pkgbase}-${pkgver} \ + --prefix=/usr \ + --sysconfdir=/etc/php \ + --with-layout=GNU \ + --with-config-file-path=/etc/php \ + --with-config-file-scan-dir=/etc/php/conf.d \ + --enable-inline-optimization \ + --disable-debug \ + --disable-rpath \ + --disable-static \ + --enable-shared \ + --mandir=/usr/share/man \ + --without-pear \ + " + + phpextensions="--with-openssl=shared \ + --with-zlib=shared \ + --enable-bcmath=shared \ + --with-bz2=shared \ + --enable-calendar=shared \ + --with-curl=shared \ + --enable-dba=shared \ + --without-db2 \ + --without-db3 \ + --with-db4=shared \ + --with-gdbm=shared \ + --enable-exif=shared \ + --enable-ftp=shared \ + --with-gd=shared \ + --enable-gd-native-ttf \ + --with-jpeg-dir=shared,/usr \ + --with-png-dir=shared,/usr \ + --with-gettext=shared \ + --without-imap \ + --without-imap-ssl \ + --without-ldap \ + --enable-mbstring=shared \ + --with-mcrypt=shared \ + --with-mysql=shared \ + --with-mysql-sock=/tmp/mysql.sock \ + --with-mysql=shared \ + --with-mysqli=shared \ + --without-unixODBC \ + --enable-pdo=shared \ + --with-pdo-mysql=shared \ + --with-pdo-sqlite=shared \ + --without-pdo-odbc \ + --without-pdo-pgsql \ + --with-sqlite=shared \ + --without-pgsql \ + --enable-shmop=shared \ + --without-snmp \ + --enable-soap=shared \ + --enable-sqlite-utf8=shared \ + --enable-sysvmsg=shared \ + --enable-sysvsem=shared \ + --enable-sysvshm=shared \ + --without-tidy \ + --with-xsl=shared \ + --enable-zip=shared \ + --enable-posix=shared \ + --enable-sockets=shared \ + --enable-xml \ + --enable-session=shared \ + --with-regex=php \ + --with-pcre-regex=/usr \ + --enable-mbstring=all \ + --enable-mbregex \ + --enable-json=shared \ + --with-iconv=shared \ + --with-xmlrpc=shared \ + --without-pspell \ + --with-freetype-dir=shared,/usr \ + " + EXTENSION_DIR=/usr/lib/php/modules + export EXTENSION_DIR + PEAR_INSTALLDIR=/usr/share/pear + export PEAR_INSTALLDIR cd ${srcdir}/${pkgbase}-${pkgver} - # adjust paths - patch -p0 -i ${srcdir}/php.ini.patch - patch -p0 -i ${srcdir}/php-fpm.conf.in.patch + # apply suhosin patch + patch -p1 -i ${srcdir}/suhosin-patch-${_suhosinver}.patch || return 1 # php - mkdir ${srcdir}/build-php - cd ${srcdir}/build-php - ln -s ../${pkgbase}-${pkgver}/configure + mkdir ${srcdir}/build-php + cd ${srcdir}/build-php + ln -s ../${pkgbase}-${pkgver}/configure ./configure ${phpconfig} \ --disable-cgi \ --with-readline \ --enable-pcntl \ - ${phpextensions} - make + ${phpextensions} || return 1 + make || return 1 # cgi and fcgi - # reuse the previous run; this will save us a lot of time - cp -a ${srcdir}/build-php ${srcdir}/build-cgi - cd ${srcdir}/build-cgi - ./configure ${phpconfig} \ - --disable-cli \ - --enable-cgi \ - ${phpextensions} - make - - # apache - cp -a ${srcdir}/build-php ${srcdir}/build-apache - cd ${srcdir}/build-apache - ./configure ${phpconfig} \ - --disable-cli \ - --with-apxs2 \ - ${phpextensions} - make - - # fpm - cp -a ${srcdir}/build-php ${srcdir}/build-fpm - cd ${srcdir}/build-fpm - ./configure ${phpconfig} \ - --disable-cli \ - --enable-fpm \ - --with-fpm-user=http \ - --with-fpm-group=http \ - ${phpextensions} - make - - # embed - cp -a ${srcdir}/build-php ${srcdir}/build-embed - cd ${srcdir}/build-embed + cp -a ${srcdir}/build-php ${srcdir}/build-cgi + cd ${srcdir}/build-cgi ./configure ${phpconfig} \ - --disable-cli \ - --enable-embed=shared \ - ${phpextensions} - make - - # pear - cp -a ${srcdir}/build-php ${srcdir}/build-pear - cd ${srcdir}/build-pear - ./configure ${phpconfig} \ - --disable-cgi \ - --with-readline \ - --enable-pcntl \ - --with-pear \ - ${phpextensions} - make + --disable-cli \ + --enable-cgi \ + ${phpextensions} || return 1 + make || return 1 + + # pear + cp -a ${srcdir}/build-php ${srcdir}/build-pear + cd ${srcdir}/build-pear + ./configure ${phpconfig} \ + --disable-cgi \ + --with-readline \ + --enable-pcntl \ + --with-pear \ + ${phpextensions} + make || return 1 } -# check() { -# cd ${srcdir}/build-php -# make test -# } - package_php() { - pkgdesc='An HTML-embedded scripting language' - depends=('pcre' 'libxml2' 'bzip2' 'curl') - replaces=('php-fileinfo' 'php-gmp' 'php-curl') - provides=('php-fileinfo' 'php-gmp' 'php-curl') - conflicts=('php-fileinfo' 'php-gmp' 'php-curl') - backup=('etc/php/php.ini') + pkgdesc='An HTML-embedded scripting language' + depends=('pcre' 'libxml2' 'bzip2' 'openssl') + replaces=('php') + provides=('php') + backup=('etc/php/php.ini') cd ${srcdir}/build-php - make -j1 INSTALL_ROOT=${pkgdir} install - install -d -m755 ${pkgdir}/usr/share/pear - # install php.ini - install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/php.ini-production ${pkgdir}/etc/php/php.ini - install -d -m755 ${pkgdir}/etc/php/conf.d/ + make INSTALL_ROOT=${pkgdir} install || return 1 + install -d -m755 ${pkgdir}/usr/share/pear + # fix broken link + ln -sf phar.phar $pkgdir/usr/bin/phar + # install php.ini + install -D -m644 ${srcdir}/php.ini ${pkgdir}/etc/php/php.ini + install -d -m755 ${pkgdir}/etc/php/conf.d/ - # remove static modules - rm -f ${pkgdir}/usr/lib/php/modules/*.a - # remove modules provided by sub packages - rm -f ${pkgdir}/usr/lib/php/modules/{enchant,gd,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so - # remove empty directory - rmdir ${pkgdir}/usr/include/php/include + # remove static modules + rm -f ${pkgdir}/usr/lib/php/modules/*.a + # remove modules provided by sub packages + rm -f ${pkgdir}/usr/lib/php/modules/{curl,enchant,gd,gmp,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so } package_php-cgi() { - pkgdesc='CGI and FCGI SAPI for PHP' - depends=('php') + pkgdesc='CGI and FCGI SAPI for PHP' + depends=('php' 'pcre' 'libxml2') - install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi -} - -package_php-apache() { - pkgdesc='Apache SAPI for PHP' - depends=('php' 'apache') - backup=('etc/httpd/conf/extra/php5_module.conf') - - install -D -m755 ${srcdir}/build-apache/libs/libphp5.so ${pkgdir}/usr/lib/httpd/modules/libphp5.so - install -D -m644 ${srcdir}/apache.conf ${pkgdir}/etc/httpd/conf/extra/php5_module.conf -} - -package_php-fpm() { - pkgdesc='FastCGI Process Manager for PHP' - depends=('php') - backup=('etc/php/php-fpm.conf') - install='php-fpm.install' - - install -D -m755 ${srcdir}/build-fpm/sapi/fpm/php-fpm ${pkgdir}/usr/sbin/php-fpm - install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.8 ${pkgdir}/usr/share/man/man8/php-fpm.8 - install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.conf ${pkgdir}/etc/php/php-fpm.conf - install -D -m755 ${srcdir}/rc.d.php-fpm ${pkgdir}/etc/rc.d/php-fpm - install -D -m644 ${srcdir}/logrotate.d.php-fpm ${pkgdir}/etc/logrotate.d/php-fpm - install -d -m755 ${pkgdir}/etc/php/fpm.d - install -D -m644 ${srcdir}/php-fpm.tmpfiles ${pkgdir}/usr/lib/tmpfiles.d/php-fpm.conf - install -D -m644 ${srcdir}/php-fpm.service ${pkgdir}/usr/lib/systemd/system/php-fpm.service -} - -package_php-embed() { - pkgdesc='Embed SAPI for PHP' - depends=('php') - - install -D -m755 ${srcdir}/build-embed/libs/libphp5.so ${pkgdir}/usr/lib/libphp5.so - install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/sapi/embed/php_embed.h ${pkgdir}/usr/include/php/sapi/embed/php_embed.h + install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi } package_php-pear() { - pkgdesc='PHP Extension and Application Repository' - depends=('php') - backup=('etc/php/pear.conf') - - cd ${srcdir}/build-pear - make install-pear INSTALL_ROOT=${pkgdir} - rm -rf ${pkgdir}/usr/share/pear/.{channels,depdb,depdblock,filemap,lock,registry} -} - -package_php-enchant() { - depends=('php' 'enchant') - pkgdesc='enchant module for PHP' - install -D -m755 ${srcdir}/build-php/modules/enchant.so ${pkgdir}/usr/lib/php/modules/enchant.so -} - -package_php-gd() { - depends=('php' 'libpng' 'libjpeg' 'freetype2' 'libvpx') - pkgdesc='gd module for PHP' - install -D -m755 ${srcdir}/build-php/modules/gd.so ${pkgdir}/usr/lib/php/modules/gd.so -} - -package_php-intl() { - depends=('php' 'icu') - pkgdesc='intl module for PHP' - install -D -m755 ${srcdir}/build-php/modules/intl.so ${pkgdir}/usr/lib/php/modules/intl.so -} - -package_php-ldap() { - depends=('php' 'libldap') - pkgdesc='ldap module for PHP' - install -D -m755 ${srcdir}/build-php/modules/ldap.so ${pkgdir}/usr/lib/php/modules/ldap.so -} - -package_php-mcrypt() { - depends=('php' 'libmcrypt' 'libltdl') - pkgdesc='mcrypt module for PHP' - install -D -m755 ${srcdir}/build-php/modules/mcrypt.so ${pkgdir}/usr/lib/php/modules/mcrypt.so -} - -package_php-mssql() { - depends=('php' 'freetds') - pkgdesc='mssql module for PHP' - install -D -m755 ${srcdir}/build-php/modules/mssql.so ${pkgdir}/usr/lib/php/modules/mssql.so -} - -package_php-odbc() { - depends=('php' 'unixodbc') - pkgdesc='ODBC modules for PHP' - install -D -m755 ${srcdir}/build-php/modules/odbc.so ${pkgdir}/usr/lib/php/modules/odbc.so - install -D -m755 ${srcdir}/build-php/modules/pdo_odbc.so ${pkgdir}/usr/lib/php/modules/pdo_odbc.so -} - -package_php-pgsql() { - depends=('php' 'postgresql-libs') - pkgdesc='PostgreSQL modules for PHP' - install -D -m755 ${srcdir}/build-php/modules/pgsql.so ${pkgdir}/usr/lib/php/modules/pgsql.so - install -D -m755 ${srcdir}/build-php/modules/pdo_pgsql.so ${pkgdir}/usr/lib/php/modules/pdo_pgsql.so -} - -package_php-pspell() { - depends=('php' 'aspell') - pkgdesc='pspell module for PHP' - install -D -m755 ${srcdir}/build-php/modules/pspell.so ${pkgdir}/usr/lib/php/modules/pspell.so -} - -package_php-snmp() { - depends=('php' 'net-snmp') - pkgdesc='snmp module for PHP' - install -D -m755 ${srcdir}/build-php/modules/snmp.so ${pkgdir}/usr/lib/php/modules/snmp.so -} - -package_php-sqlite() { - depends=('php' 'sqlite') - pkgdesc='sqlite module for PHP' - install -D -m755 ${srcdir}/build-php/modules/sqlite3.so ${pkgdir}/usr/lib/php/modules/sqlite3.so - install -D -m755 ${srcdir}/build-php/modules/pdo_sqlite.so ${pkgdir}/usr/lib/php/modules/pdo_sqlite.so -} - -package_php-tidy() { - depends=('php' 'tidyhtml') - pkgdesc='tidy module for PHP' - install -D -m755 ${srcdir}/build-php/modules/tidy.so ${pkgdir}/usr/lib/php/modules/tidy.so -} - -package_php-xsl() { - depends=('php' 'libxslt') - pkgdesc='xsl module for PHP' - install -D -m755 ${srcdir}/build-php/modules/xsl.so ${pkgdir}/usr/lib/php/modules/xsl.so -} + pkgdesc='PHP Extension and Application Repository' + depends=('php' 'bash') + backup=('etc/php/pear.conf') + + cd ${srcdir}/build-pear + make install-pear INSTALL_ROOT=${pkgdir} || return 1 + local i + while read i; do + [ ! -e "$i" ] || rm -rf "$i" + done < <(find ${pkgdir} -name '.*') +} +md5sums=('21ceeeb232813c10283a5ca1b4c87b48' + 'b66b27c43b1332400ef8982944c3b95b' + 'b210db564281600c42f8eaa264eac3a5' + '96ca078be6729b665be8a865535a97bf') diff --git a/abs/core/php/php.ini b/abs/core/php/php.ini new file mode 100644 index 0000000..3f70777 --- /dev/null +++ b/abs/core/php/php.ini @@ -0,0 +1,1304 @@ +[PHP] + +;;;;;;;;;;;;;;;;;;; +; About php.ini ; +;;;;;;;;;;;;;;;;;;; +; This file controls many aspects of PHP's behavior. In order for PHP to +; read it, it must be named 'php.ini'. PHP looks for it in the current +; working directory, in the path designated by the environment variable +; PHPRC, and in the path that was defined in compile time (in that order). +; The path in which the php.ini file is looked for can be overridden using +; the -c argument in command line mode. +; +; The syntax of the file is extremely simple. Whitespace and Lines +; beginning with a semicolon are silently ignored (as you probably guessed). +; Section headers (e.g. [Foo]) are also silently ignored, even though +; they might mean something in the future. +; +; Directives are specified using the following syntax: +; directive = value +; Directive names are *case sensitive* - foo=bar is different from FOO=bar. +; +; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one +; of the INI constants (On, Off, True, False, Yes, No and None) or an expression +; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). +; +; Expressions in the INI file are limited to bitwise operators and parentheses: +; | bitwise OR +; & bitwise AND +; ~ bitwise NOT +; ! boolean NOT +; +; Boolean flags can be turned on using the values 1, On, True or Yes. +; They can be turned off using the values 0, Off, False or No. +; +; An empty string can be denoted by simply not writing anything after the equal +; sign, or by using the None keyword: +; +; foo = ; sets foo to an empty string +; foo = none ; sets foo to an empty string +; foo = "none" ; sets foo to the string 'none' +; +; If you use constants in your value, and these constants belong to a +; dynamically loaded extension (either a PHP extension or a Zend extension), +; you may only use these constants *after* the line that loads the extension. +; +; +;;;;;;;;;;;;;;;;;;; +; About this file ; +;;;;;;;;;;;;;;;;;;; +; This is the recommended, PHP 5-style version of the php.ini-dist file. It +; sets some non standard settings, that make PHP more efficient, more secure, +; and encourage cleaner coding. +; +; The price is that with these settings, PHP may be incompatible with some +; applications, and sometimes, more difficult to develop with. Using this +; file is warmly recommended for production sites. As all of the changes from +; the standard settings are thoroughly documented, you can go over each one, +; and decide whether you want to use it or not. +; +; For general information about the php.ini file, please consult the php.ini-dist +; file, included in your PHP distribution. +; +; This file is different from the php.ini-dist file in the fact that it features +; different values for several directives, in order to improve performance, while +; possibly breaking compatibility with the standard out-of-the-box behavior of +; PHP. Please make sure you read what's different, and modify your scripts +; accordingly, if you decide to use this file instead. +; +; - register_long_arrays = Off [Performance] +; Disables registration of the older (and deprecated) long predefined array +; variables ($HTTP_*_VARS). Instead, use the superglobals that were +; introduced in PHP 4.1.0 +; - display_errors = Off [Security] +; With this directive set to off, errors that occur during the execution of +; scripts will no longer be displayed as a part of the script output, and thus, +; will no longer be exposed to remote users. With some errors, the error message +; content may expose information about your script, web server, or database +; server that may be exploitable for hacking. Production sites should have this +; directive set to off. +; - log_errors = On [Security] +; This directive complements the above one. Any errors that occur during the +; execution of your script will be logged (typically, to your server's error log, +; but can be configured in several ways). Along with setting display_errors to off, +; this setup gives you the ability to fully understand what may have gone wrong, +; without exposing any sensitive information to remote users. +; - output_buffering = 4096 [Performance] +; Set a 4KB output buffer. Enabling output buffering typically results in less +; writes, and sometimes less packets sent on the wire, which can often lead to +; better performance. The gain this directive actually yields greatly depends +; on which Web server you're working with, and what kind of scripts you're using. +; - register_argc_argv = Off [Performance] +; Disables registration of the somewhat redundant $argv and $argc global +; variables. +; - magic_quotes_gpc = Off [Performance] +; Input data is no longer escaped with slashes so that it can be sent into +; SQL databases without further manipulation. Instead, you should use the +; function addslashes() on each input element you wish to send to a database. +; - variables_order = "GPCS" [Performance] +; The environment variables are not hashed into the $_ENV. To access +; environment variables, you can use getenv() instead. +; - error_reporting = E_ALL [Code Cleanliness, Security(?)] +; By default, PHP suppresses errors of type E_NOTICE. These error messages +; are emitted for non-critical errors, but that could be a symptom of a bigger +; problem. Most notably, this will cause error messages about the use +; of uninitialized variables to be displayed. +; - allow_call_time_pass_reference = Off [Code cleanliness] +; It's not possible to decide to force a variable to be passed by reference +; when calling a function. The PHP 4 style to do this is by making the +; function require the relevant argument by reference. +; - short_open_tag = Off [Portability] +; Using short tags is discouraged when developing code meant for redistribution +; since short tags may not be supported on the target server. + +;;;;;;;;;;;;;;;;;;;; +; Language Options ; +;;;;;;;;;;;;;;;;;;;; + +; Enable the PHP scripting language engine under Apache. +engine = On + +; Enable compatibility mode with Zend Engine 1 (PHP 4.x) +zend.ze1_compatibility_mode = Off + +; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. +; NOTE: Using short tags should be avoided when developing applications or +; libraries that are meant for redistribution, or deployment on PHP +; servers which are not under your control, because short tags may not +; be supported on the target server. For portable, redistributable code, +; be sure not to use short tags. +short_open_tag = On + +; Allow ASP-style <% %> tags. +asp_tags = Off + +; The number of significant digits displayed in floating point numbers. +precision = 14 + +; Enforce year 2000 compliance (will cause problems with non-compliant browsers) +y2k_compliance = On + +; Output buffering allows you to send header lines (including cookies) even +; after you send body content, at the price of slowing PHP's output layer a +; bit. You can enable output buffering during runtime by calling the output +; buffering functions. You can also enable output buffering for all files by +; setting this directive to On. If you wish to limit the size of the buffer +; to a certain size - you can use a maximum number of bytes instead of 'On', as +; a value for this directive (e.g., output_buffering=4096). +output_buffering = 4096 + +; You can redirect all of the output of your scripts to a function. For +; example, if you set output_handler to "mb_output_handler", character +; encoding will be transparently converted to the specified encoding. +; Setting any output handler automatically turns on output buffering. +; Note: People who wrote portable scripts should not depend on this ini +; directive. Instead, explicitly set the output handler using ob_start(). +; Using this ini directive may cause problems unless you know what script +; is doing. +; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" +; and you cannot use both "ob_gzhandler" and "zlib.output_compression". +; Note: output_handler must be empty if this is set 'On' !!!! +; Instead you must use zlib.output_handler. +;output_handler = + +; Transparent output compression using the zlib library +; Valid values for this option are 'off', 'on', or a specific buffer size +; to be used for compression (default is 4KB) +; Note: Resulting chunk size may vary due to nature of compression. PHP +; outputs chunks that are few hundreds bytes each as a result of +; compression. If you prefer a larger chunk size for better +; performance, enable output_buffering in addition. +; Note: You need to use zlib.output_handler instead of the standard +; output_handler, or otherwise the output will be corrupted. +zlib.output_compression = Off +;zlib.output_compression_level = -1 + +; You cannot specify additional output handlers if zlib.output_compression +; is activated here. This setting does the same as output_handler but in +; a different order. +;zlib.output_handler = + +; Implicit flush tells PHP to tell the output layer to flush itself +; automatically after every output block. This is equivalent to calling the +; PHP function flush() after each and every call to print() or echo() and each +; and every HTML block. Turning this option on has serious performance +; implications and is generally recommended for debugging purposes only. +implicit_flush = Off + +; The unserialize callback function will be called (with the undefined class' +; name as parameter), if the unserializer finds an undefined class +; which should be instantiated. +; A warning appears if the specified function is not defined, or if the +; function doesn't include/implement the missing class. +; So only set this entry, if you really want to implement such a +; callback-function. +unserialize_callback_func= + +; When floats & doubles are serialized store serialize_precision significant +; digits after the floating point. The default value ensures that when floats +; are decoded with unserialize, the data will remain the same. +serialize_precision = 100 + +; Whether to enable the ability to force arguments to be passed by reference +; at function call time. This method is deprecated and is likely to be +; unsupported in future versions of PHP/Zend. The encouraged method of +; specifying which arguments should be passed by reference is in the function +; declaration. You're encouraged to try and turn this option Off and make +; sure your scripts work properly with it in order to ensure they will work +; with future versions of the language (you will receive a warning each time +; you use this feature, and the argument will be passed by value instead of by +; reference). +allow_call_time_pass_reference = Off + +; +; Safe Mode +; +safe_mode = Off + +; By default, Safe Mode does a UID compare check when +; opening files. If you want to relax this to a GID compare, +; then turn on safe_mode_gid. +safe_mode_gid = Off + +; When safe_mode is on, UID/GID checks are bypassed when +; including files from this directory and its subdirectories. +; (directory must also be in include_path or full path must +; be used when including) +safe_mode_include_dir = + +; When safe_mode is on, only executables located in the safe_mode_exec_dir +; will be allowed to be executed via the exec family of functions. +safe_mode_exec_dir = + +; Setting certain environment variables may be a potential security breach. +; This directive contains a comma-delimited list of prefixes. In Safe Mode, +; the user may only alter environment variables whose names begin with the +; prefixes supplied here. By default, users will only be able to set +; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). +; +; Note: If this directive is empty, PHP will let the user modify ANY +; environment variable! +safe_mode_allowed_env_vars = PHP_ + +; This directive contains a comma-delimited list of environment variables that +; the end user won't be able to change using putenv(). These variables will be +; protected even if safe_mode_allowed_env_vars is set to allow to change them. +safe_mode_protected_env_vars = LD_LIBRARY_PATH + +; open_basedir, if set, limits all file operations to the defined directory +; and below. This directive makes most sense if used in a per-directory +; or per-virtualhost web server configuration file. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +;open_basedir = /data/srv/httpd/htdocs/:/home/:/tmp/:/usr/share/pear/:/data/srv/tmp:/usr/share/mythtv/mythweather/scripts/:/data/srv/httpd/htdocs/mythweb/data/video:/myth/ipodfeed:/data/srv/httpd/htdocs/archive:/etc:/myth:/media + +; This directive allows you to disable certain functions for security reasons. +; It receives a comma-delimited list of function names. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +disable_functions = + +; This directive allows you to disable certain classes for security reasons. +; It receives a comma-delimited list of class names. This directive is +; *NOT* affected by whether Safe Mode is turned On or Off. +disable_classes = + +; Colors for Syntax Highlighting mode. Anything that's acceptable in +; <span style="color: ???????"> would work. +;highlight.string = #DD0000 +;highlight.comment = #FF9900 +;highlight.keyword = #007700 +;highlight.bg = #FFFFFF +;highlight.default = #0000BB +;highlight.html = #000000 + +; If enabled, the request will be allowed to complete even if the user aborts +; the request. Consider enabling it if executing long request, which may end up +; being interrupted by the user or a browser timing out. +; ignore_user_abort = On + +; Determines the size of the realpath cache to be used by PHP. This value should +; be increased on systems where PHP opens many files to reflect the quantity of +; the file operations performed. +; realpath_cache_size=16k + +; Duration of time, in seconds for which to cache realpath information for a given +; file or directory. For systems with rarely changing files, consider increasing this +; value. +; realpath_cache_ttl=120 + +; +; Misc +; +; Decides whether PHP may expose the fact that it is installed on the server +; (e.g. by adding its signature to the Web server header). It is no security +; threat in any way, but it makes it possible to determine whether you use PHP +; on your server or not. +expose_php = Off + + +;;;;;;;;;;;;;;;;;;; +; Resource Limits ; +;;;;;;;;;;;;;;;;;;; + +max_execution_time = 30 ; Maximum execution time of each script, in seconds +max_input_time = 60 ; Maximum amount of time each script may spend parsing request data +;max_input_nesting_level = 64 ; Maximum input variable nesting level +memory_limit = 64M ; Maximum amount of memory a script may consume (32MB) + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Error handling and logging ; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; error_reporting is a bit-field. Or each number up to get desired error +; reporting level +; E_ALL - All errors and warnings (doesn't include E_STRICT) +; E_ERROR - fatal run-time errors +; E_RECOVERABLE_ERROR - almost fatal run-time errors +; E_WARNING - run-time warnings (non-fatal errors) +; E_PARSE - compile-time parse errors +; E_NOTICE - run-time notices (these are warnings which often result +; from a bug in your code, but it's possible that it was +; intentional (e.g., using an uninitialized variable and +; relying on the fact it's automatically initialized to an +; empty string) +; E_STRICT - run-time notices, enable to have PHP suggest changes +; to your code which will ensure the best interoperability +; and forward compatibility of your code +; E_CORE_ERROR - fatal errors that occur during PHP's initial startup +; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's +; initial startup +; E_COMPILE_ERROR - fatal compile-time errors +; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) +; E_USER_ERROR - user-generated error message +; E_USER_WARNING - user-generated warning message +; E_USER_NOTICE - user-generated notice message +; +; Examples: +; +; - Show all errors, except for notices and coding standards warnings +; +error_reporting = E_ALL & ~E_NOTICE +; +; - Show all errors, except for notices +; +;error_reporting = E_ALL & ~E_NOTICE | E_STRICT +; +; - Show only errors +; +;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR +; +; - Show all errors, except coding standards warnings +; +error_reporting = E_ALL + +; Print out errors (as a part of the output). For production web sites, +; you're strongly encouraged to turn this feature off, and use error logging +; instead (see below). Keeping display_errors enabled on a production web site +; may reveal security information to end users, such as file paths on your Web +; server, your database schema or other information. +; +; possible values for display_errors: +; +; Off - Do not display any errors +; stderr - Display errors to STDERR (affects only CGI/CLI binaries!) +; On or stdout - Display errors to STDOUT (default) +; +; To output errors to STDERR with CGI/CLI: +display_errors = "stderr" +; +; Default +; +;display_errors = on + +; Even when display_errors is on, errors that occur during PHP's startup +; sequence are not displayed. It's strongly recommended to keep +; display_startup_errors off, except for when debugging. +display_startup_errors = Off + +; Log errors into a log file (server-specific log, stderr, or error_log (below)) +; As stated above, you're strongly advised to use error logging in place of +; error displaying on production web sites. +log_errors = On + +; Set maximum length of log_errors. In error_log information about the source is +; added. The default is 1024 and 0 allows to not apply any maximum length at all. +log_errors_max_len = 1024 + +; Do not log repeated messages. Repeated errors must occur in same file on same +; line until ignore_repeated_source is set true. +ignore_repeated_errors = Off + +; Ignore source of message when ignoring repeated messages. When this setting +; is On you will not log errors with repeated messages from different files or +; source lines. +ignore_repeated_source = Off + +; If this parameter is set to Off, then memory leaks will not be shown (on +; stdout or in the log). This has only effect in a debug compile, and if +; error reporting includes E_WARNING in the allowed list +report_memleaks = Off + +;report_zend_debug = 0 + +; Store the last error/warning message in $php_errormsg (boolean). +track_errors = Off + +; Disable the inclusion of HTML tags in error messages. +; Note: Never use this feature for production boxes. +;html_errors = Off + +; If html_errors is set On PHP produces clickable error messages that direct +; to a page describing the error or function causing the error in detail. +; You can download a copy of the PHP manual from http://www.php.net/docs.php +; and change docref_root to the base URL of your local copy including the +; leading '/'. You must also specify the file extension being used including +; the dot. +; Note: Never use this feature for production boxes. +;docref_root = "/phpmanual/" +;docref_ext = .html + +; String to output before an error message. +;error_prepend_string = "<font color=ff0000>" + +; String to output after an error message. +;error_append_string = "</font>" + +; Log errors to specified file. +;error_log = filename + +; Log errors to syslog. +error_log = syslog + + +;;;;;;;;;;;;;;;;; +; Data Handling ; +;;;;;;;;;;;;;;;;; +; +; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 + +; The separator used in PHP generated URLs to separate arguments. +; Default is "&". +;arg_separator.output = "&" + +; List of separator(s) used by PHP to parse input URLs into variables. +; Default is "&". +; NOTE: Every character in this directive is considered as separator! +;arg_separator.input = ";&" + +; This directive describes the order in which PHP registers GET, POST, Cookie, +; Environment and Built-in variables (G, P, C, E & S respectively, often +; referred to as EGPCS or GPC). Registration is done from left to right, newer +; values override older values. +variables_order = "GPCS" + +; Whether or not to register the EGPCS variables as global variables. You may +; want to turn this off if you don't want to clutter your scripts' global scope +; with user data. This makes most sense when coupled with track_vars - in which +; case you can access all of the GPC variables through the $HTTP_*_VARS[], +; variables. +; +; You should do your best to write your scripts so that they do not require +; register_globals to be on; Using form variables as globals can easily lead +; to possible security problems, if the code is not very well thought of. +register_globals = Off + +; Whether or not to register the old-style input arrays, HTTP_GET_VARS +; and friends. If you're not using them, it's recommended to turn them off, +; for performance reasons. +register_long_arrays = Off + +; This directive tells PHP whether to declare the argv&argc variables (that +; would contain the GET information). If you don't use these variables, you +; should turn it off for increased performance. +register_argc_argv = Off + +; When enabled, the SERVER and ENV variables are created when they're first +; used (Just In Time) instead of when the script starts. If these variables +; are not used within a script, having this directive on will result in a +; performance gain. The PHP directives register_globals, register_long_arrays, +; and register_argc_argv must be disabled for this directive to have any affect. +auto_globals_jit = On + +; Maximum size of POST data that PHP will accept. +post_max_size = 8M + +; Magic quotes +; + +; Magic quotes for incoming GET/POST/Cookie data. +magic_quotes_gpc = Off + +; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. +magic_quotes_runtime = Off + +; Use Sybase-style magic quotes (escape ' with '' instead of \'). +magic_quotes_sybase = Off + +; Automatically add files before or after any PHP document. +auto_prepend_file = +auto_append_file = + +; As of 4.0b4, PHP always outputs a character encoding by default in +; the Content-type: header. To disable sending of the charset, simply +; set it to be empty. +; +; PHP's built-in default is text/html +default_mimetype = "text/html" +;default_charset = "iso-8859-1" + +; Always populate the $HTTP_RAW_POST_DATA variable. +;always_populate_raw_post_data = On + + +;;;;;;;;;;;;;;;;;;;;;;;;; +; Paths and Directories ; +;;;;;;;;;;;;;;;;;;;;;;;;; + +; UNIX: "/path1:/path2" +include_path = ".:/usr/share/pear" + +; The root of the PHP pages, used only if nonempty. +; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root +; if you are running php as a CGI under any web server (other than IIS) +; see documentation for security issues. The alternate is to use the +; cgi.force_redirect configuration below +doc_root = + +; The directory under which PHP opens the script using /~username used only +; if nonempty. +user_dir = + +; Directory in which the loadable extensions (modules) reside. +extension_dir = "/usr/lib/php/modules/" + +; Whether or not to enable the dl() function. The dl() function does NOT work +; properly in multithreaded servers, such as IIS or Zeus, and is automatically +; disabled on them. +enable_dl = Off + +; cgi.force_redirect is necessary to provide security running PHP as a CGI under +; most web servers. Left undefined, PHP turns this on by default. You can +; turn it off here AT YOUR OWN RISK +; **You CAN safely turn this off for IIS, in fact, you MUST.** +; cgi.force_redirect = 1 + +; if cgi.nph is enabled it will force cgi to always sent Status: 200 with +; every request. +; cgi.nph = 1 + +; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape +; (iPlanet) web servers, you MAY need to set an environment variable name that PHP +; will look for to know it is OK to continue execution. Setting this variable MAY +; cause security issues, KNOW WHAT YOU ARE DOING FIRST. +; cgi.redirect_status_env = ; + +; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's +; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok +; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting +; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting +; of zero causes PHP to behave as before. Default is 1. You should fix your scripts +; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. +; cgi.fix_pathinfo=1 + +; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate +; security tokens of the calling client. This allows IIS to define the +; security context that the request runs under. mod_fastcgi under Apache +; does not currently support this feature (03/17/2002) +; Set to 1 if running under IIS. Default is zero. +; fastcgi.impersonate = 1; + +; Disable logging through FastCGI connection +; fastcgi.logging = 0 + +; cgi.rfc2616_headers configuration option tells PHP what type of headers to +; use when sending HTTP response code. If it's set 0 PHP sends Status: header that +; is supported by Apache. When this option is set to 1 PHP will send +; RFC2616 compliant header. +; Default is zero. +;cgi.rfc2616_headers = 0 + + +;;;;;;;;;;;;;;;; +; File Uploads ; +;;;;;;;;;;;;;;;; + +; Whether to allow HTTP file uploads. +file_uploads = On + +; Temporary directory for HTTP uploaded files (will use system default if not +; specified). +;upload_tmp_dir = + +; Maximum allowed size for uploaded files. +upload_max_filesize = 2M + + +;;;;;;;;;;;;;;;;;; +; Fopen wrappers ; +;;;;;;;;;;;;;;;;;; + +; Whether to allow the treatment of URLs (like http:// or ftp://) as files. +allow_url_fopen = on + +; Whether to allow include/require to open URLs (like http:// or ftp://) as files. +allow_url_include = on + +; Define the anonymous ftp password (your email address) +;from="john@doe.com" + +; Define the User-Agent string +; user_agent="PHP" + +; Default timeout for socket based streams (seconds) +default_socket_timeout = 60 + +;;;;;;;;;;;;;;;;;;;;;; +; Dynamic Extensions ; +;;;;;;;;;;;;;;;;;;;;;; +; +; If you wish to have an extension loaded automatically, use the following +; syntax: +; +; extension=modulename.extension +; +; For example, under UNIX: +; +; extension=msql.so +; +; Note that it should be the name of the module only; no directory information +; needs to go here. Specify the location of the extension with the +; extension_dir directive above. + +;;;;;;;;;;;;;;;;;;; +; Module Settings ; +;;;;;;;;;;;;;;;;;;; + +[Date] +; Defines the default timezone used by the date functions +;date.timezone = + +;date.default_latitude = 31.7667 +;date.default_longitude = 35.2333 + +;date.sunrise_zenith = 90.583333 +;date.sunset_zenith = 90.583333 + +[filter] +;filter.default = unsafe_raw +;filter.default_flags = + +[iconv] +;iconv.input_encoding = ISO-8859-1 +;iconv.internal_encoding = ISO-8859-1 +;iconv.output_encoding = ISO-8859-1 + +[sqlite] +;sqlite.assoc_case = 0 + +[xmlrpc] +;xmlrpc_error_number = 0 +;xmlrpc_errors = 0 + +[Pcre] +;PCRE library backtracking limit. +;pcre.backtrack_limit=100000 + +;PCRE library recursion limit. +;Please note that if you set this value to a high number you may consume all +;the available process stack and eventually crash PHP (due to reaching the +;stack size limit imposed by the Operating System). +;pcre.recursion_limit=100000 + +[Syslog] +; Whether or not to define the various syslog variables (e.g. $LOG_PID, +; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In +; runtime, you can define these variables by calling define_syslog_variables(). +define_syslog_variables = Off + +[mail function] +; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). +;sendmail_path = + +; Force the addition of the specified parameters to be passed as extra parameters +; to the sendmail binary. These parameters will always replace the value of +; the 5th parameter to mail(), even in safe mode. +;mail.force_extra_parameters = + +[SQL] +sql.safe_mode = Off + +[ODBC] +;odbc.default_db = Not yet implemented +;odbc.default_user = Not yet implemented +;odbc.default_pw = Not yet implemented + +; Allow or prevent persistent links. +odbc.allow_persistent = On + +; Check that a connection is still valid before reuse. +odbc.check_persistent = On + +; Maximum number of persistent links. -1 means no limit. +odbc.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +odbc.max_links = -1 + +; Handling of LONG fields. Returns number of bytes to variables. 0 means +; passthru. +odbc.defaultlrl = 4096 + +; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. +; See the documentation on odbc_binmode and odbc_longreadlen for an explanation +; of uodbc.defaultlrl and uodbc.defaultbinmode +odbc.defaultbinmode = 1 + +[MySQL] +; Allow or prevent persistent links. +mysql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +mysql.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +mysql.max_links = -1 + +; Default port number for mysql_connect(). If unset, mysql_connect() will use +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the +; compile-time value defined MYSQL_PORT (in that order). +mysql.default_port = + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +mysql.default_socket = /var/run/mysqld/mysqld.sock + +; Default host for mysql_connect() (doesn't apply in safe mode). +mysql.default_host = + +; Default user for mysql_connect() (doesn't apply in safe mode). +mysql.default_user = + +; Default password for mysql_connect() (doesn't apply in safe mode). +; Note that this is generally a *bad* idea to store passwords in this file. +; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") +; and reveal this password! And of course, any users with read access to this +; file will be able to reveal the password as well. +mysql.default_password = + +; Maximum time (in seconds) for connect timeout. -1 means no limit +mysql.connect_timeout = 60 + +; Trace mode. When trace_mode is active (=On), warnings for table/index scans and +; SQL-Errors will be displayed. +mysql.trace_mode = Off + +[MySQLi] + +; Maximum number of links. -1 means no limit. +mysqli.max_links = -1 + +; Default port number for mysqli_connect(). If unset, mysqli_connect() will use +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the +; compile-time value defined MYSQL_PORT (in that order). +mysqli.default_port = 3306 + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +mysqli.default_socket = + +; Default host for mysql_connect() (doesn't apply in safe mode). +mysqli.default_host = + +; Default user for mysql_connect() (doesn't apply in safe mode). +mysqli.default_user = + +; Default password for mysqli_connect() (doesn't apply in safe mode). +; Note that this is generally a *bad* idea to store passwords in this file. +; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") +; and reveal this password! And of course, any users with read access to this +; file will be able to reveal the password as well. +mysqli.default_pw = + +; Allow or prevent reconnect +mysqli.reconnect = Off + +[mSQL] +; Allow or prevent persistent links. +msql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +msql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +msql.max_links = -1 + +[OCI8] +; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA) +;oci8.privileged_connect = Off + +; Connection: The maximum number of persistent OCI8 connections per +; process. Using -1 means no limit. +;oci8.max_persistent = -1 + +; Connection: The maximum number of seconds a process is allowed to +; maintain an idle persistent connection. Using -1 means idle +; persistent connections will be maintained forever. +;oci8.persistent_timeout = -1 + +; Connection: The number of seconds that must pass before issuing a +; ping during oci_pconnect() to check the connection validity. When +; set to 0, each oci_pconnect() will cause a ping. Using -1 disables +; pings completely. +;oci8.ping_interval = 60 + +; Tuning: This option enables statement caching, and specifies how +; many statements to cache. Using 0 disables statement caching. +;oci8.statement_cache_size = 20 + +; Tuning: Enables statement prefetching and sets the default number of +; rows that will be fetched automatically after statement execution. +;oci8.default_prefetch = 10 + +; Compatibility. Using On means oci_close() will not close +; oci_connect() and oci_new_connect() connections. +;oci8.old_oci_close_semantics = Off + +[PostgresSQL] +; Allow or prevent persistent links. +pgsql.allow_persistent = On + +; Detect broken persistent links always with pg_pconnect(). +; Auto reset feature requires a little overheads. +pgsql.auto_reset_persistent = Off + +; Maximum number of persistent links. -1 means no limit. +pgsql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +pgsql.max_links = -1 + +; Ignore PostgreSQL backends Notice message or not. +; Notice message logging require a little overheads. +pgsql.ignore_notice = 0 + +; Log PostgreSQL backends Noitce message or not. +; Unless pgsql.ignore_notice=0, module cannot log notice message. +pgsql.log_notice = 0 + +[Sybase] +; Allow or prevent persistent links. +sybase.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +sybase.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +sybase.max_links = -1 + +;sybase.interface_file = "/usr/sybase/interfaces" + +; Minimum error severity to display. +sybase.min_error_severity = 10 + +; Minimum message severity to display. +sybase.min_message_severity = 10 + +; Compatibility mode with old versions of PHP 3.0. +; If on, this will cause PHP to automatically assign types to results according +; to their Sybase type, instead of treating them all as strings. This +; compatibility mode will probably not stay around forever, so try applying +; whatever necessary changes to your code, and turn it off. +sybase.compatability_mode = Off + +[Sybase-CT] +; Allow or prevent persistent links. +sybct.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +sybct.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +sybct.max_links = -1 + +; Minimum server message severity to display. +sybct.min_server_severity = 10 + +; Minimum client message severity to display. +sybct.min_client_severity = 10 + +[bcmath] +; Number of decimal digits for all bcmath functions. +bcmath.scale = 0 + +[browscap] +;browscap = extra/browscap.ini + +[Informix] +; Default host for ifx_connect() (doesn't apply in safe mode). +ifx.default_host = + +; Default user for ifx_connect() (doesn't apply in safe mode). +ifx.default_user = + +; Default password for ifx_connect() (doesn't apply in safe mode). +ifx.default_password = + +; Allow or prevent persistent links. +ifx.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +ifx.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +ifx.max_links = -1 + +; If on, select statements return the contents of a text blob instead of its id. +ifx.textasvarchar = 0 + +; If on, select statements return the contents of a byte blob instead of its id. +ifx.byteasvarchar = 0 + +; Trailing blanks are stripped from fixed-length char columns. May help the +; life of Informix SE users. +ifx.charasvarchar = 0 + +; If on, the contents of text and byte blobs are dumped to a file instead of +; keeping them in memory. +ifx.blobinfile = 0 + +; NULL's are returned as empty strings, unless this is set to 1. In that case, +; NULL's are returned as string 'NULL'. +ifx.nullformat = 0 + +[Session] +; Handler used to store/retrieve data. +session.save_handler = files + +; Argument passed to save_handler. In the case of files, this is the path +; where data files are stored. +; +; As of PHP 4.0.1, you can define the path as: +; +; session.save_path = "N;/path" +; +; where N is an integer. Instead of storing all the session files in +; /path, what this will do is use subdirectories N-levels deep, and +; store the session data in those directories. This is useful if you +; or your OS have problems with lots of files in one directory, and is +; a more efficient layout for servers that handle lots of sessions. +; +; NOTE 1: PHP will not create this directory structure automatically. +; You can use the script in the ext/session dir for that purpose. +; NOTE 2: See the section on garbage collection below if you choose to +; use subdirectories for session storage +; +; The file storage module creates files using mode 600 by default. +; You can change that by using +; +; session.save_path = "N;MODE;/path" +; +; where MODE is the octal representation of the mode. Note that this +; does not overwrite the process's umask. +session.save_path = "/tmp" + +; Whether to use cookies. +session.use_cookies = 1 + +;session.cookie_secure = + +; This option enables administrators to make their users invulnerable to +; attacks which involve passing session ids in URLs; defaults to 0. +; session.use_only_cookies = 1 + +; Name of the session (used as cookie name). +session.name = PHPSESSID + +; Initialize session on request startup. +session.auto_start = 0 + +; Lifetime in seconds of cookie or, if 0, until browser is restarted. +session.cookie_lifetime = 0 + +; The path for which the cookie is valid. +session.cookie_path = / + +; The domain for which the cookie is valid. +session.cookie_domain = + +; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. +session.cookie_httponly = + +; Handler used to serialize data. php is the standard serializer of PHP. +session.serialize_handler = php + +; Define the probability that the 'garbage collection' process is started +; on every session initialization. +; The probability is calculated by using gc_probability/gc_divisor, +; e.g. 1/100 means there is a 1% chance that the GC process starts +; on each request. + +session.gc_probability = 1 +session.gc_divisor = 1000 + +; After this number of seconds, stored data will be seen as 'garbage' and +; cleaned up by the garbage collection process. +session.gc_maxlifetime = 1440 + +; NOTE: If you are using the subdirectory option for storing session files +; (see session.save_path above), then garbage collection does *not* +; happen automatically. You will need to do your own garbage +; collection through a shell script, cron entry, or some other method. +; For example, the following script would is the equivalent of +; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): +; cd /path/to/sessions; find -cmin +24 | xargs rm + +; PHP 4.2 and less have an undocumented feature/bug that allows you to +; to initialize a session variable in the global scope, albeit register_globals +; is disabled. PHP 4.3 and later will warn you, if this feature is used. +; You can disable the feature and the warning separately. At this time, +; the warning is only displayed, if bug_compat_42 is enabled. + +session.bug_compat_42 = 0 +session.bug_compat_warn = 1 + +; Check HTTP Referer to invalidate externally stored URLs containing ids. +; HTTP_REFERER has to contain this substring for the session to be +; considered as valid. +session.referer_check = + +; How many bytes to read from the file. +session.entropy_length = 0 + +; Specified here to create the session id. +session.entropy_file = + +;session.entropy_length = 16 + +;session.entropy_file = /dev/urandom + +; Set to {nocache,private,public,} to determine HTTP caching aspects +; or leave this empty to avoid sending anti-caching headers. +session.cache_limiter = nocache + +; Document expires after n minutes. +session.cache_expire = 180 + +; trans sid support is disabled by default. +; Use of trans sid may risk your users security. +; Use this option with caution. +; - User may send URL contains active session ID +; to other person via. email/irc/etc. +; - URL that contains active session ID may be stored +; in publically accessible computer. +; - User may access your site with the same session ID +; always using URL stored in browser's history or bookmarks. +session.use_trans_sid = 0 + +; Select a hash function +; 0: MD5 (128 bits) +; 1: SHA-1 (160 bits) +session.hash_function = 0 + +; Define how many bits are stored in each character when converting +; the binary hash data to something readable. +; +; 4 bits: 0-9, a-f +; 5 bits: 0-9, a-v +; 6 bits: 0-9, a-z, A-Z, "-", "," +session.hash_bits_per_character = 5 + +; The URL rewriter will look for URLs in a defined set of HTML tags. +; form/fieldset are special; if you include them here, the rewriter will +; add a hidden <input> field with the info which is otherwise appended +; to URLs. If you want XHTML conformity, remove the form entry. +; Note that all valid entries require a "=", even if no value follows. +url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" + +[MSSQL] +; Allow or prevent persistent links. +mssql.allow_persistent = On + +; Maximum number of persistent links. -1 means no limit. +mssql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +mssql.max_links = -1 + +; Minimum error severity to display. +mssql.min_error_severity = 10 + +; Minimum message severity to display. +mssql.min_message_severity = 10 + +; Compatibility mode with old versions of PHP 3.0. +mssql.compatability_mode = Off + +; Connect timeout +;mssql.connect_timeout = 5 + +; Query timeout +;mssql.timeout = 60 + +; Valid range 0 - 2147483647. Default = 4096. +;mssql.textlimit = 4096 + +; Valid range 0 - 2147483647. Default = 4096. +;mssql.textsize = 4096 + +; Limits the number of records in each batch. 0 = all records in one batch. +;mssql.batchsize = 0 + +; Specify how datetime and datetim4 columns are returned +; On => Returns data converted to SQL server settings +; Off => Returns values as YYYY-MM-DD hh:mm:ss +;mssql.datetimeconvert = On + +; Use NT authentication when connecting to the server +mssql.secure_connection = Off + +; Specify max number of processes. -1 = library default +; msdlib defaults to 25 +; FreeTDS defaults to 4096 +;mssql.max_procs = -1 + +; Specify client character set. +; If empty or not set the client charset from freetds.comf is used +; This is only used when compiled with FreeTDS +;mssql.charset = "ISO-8859-1" + +[Assertion] +; Assert(expr); active by default. +;assert.active = On + +; Issue a PHP warning for each failed assertion. +;assert.warning = On + +; Don't bail out by default. +;assert.bail = Off + +; User-function to be called if an assertion fails. +;assert.callback = 0 + +; Eval the expression with current error_reporting(). Set to true if you want +; error_reporting(0) around the eval(). +;assert.quiet_eval = 0 + +[COM] +; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs +;com.typelib_file = +; allow Distributed-COM calls +;com.allow_dcom = true +; autoregister constants of a components typlib on com_load() +;com.autoregister_typelib = true +; register constants casesensitive +;com.autoregister_casesensitive = false +; show warnings on duplicate constant registrations +;com.autoregister_verbose = true + +[mbstring] +; language for internal character representation. +;mbstring.language = Japanese + +; internal/script encoding. +; Some encoding cannot work as internal encoding. +; (e.g. SJIS, BIG5, ISO-2022-*) +;mbstring.internal_encoding = EUC-JP + +; http input encoding. +;mbstring.http_input = auto + +; http output encoding. mb_output_handler must be +; registered as output buffer to function +;mbstring.http_output = SJIS + +; enable automatic encoding translation according to +; mbstring.internal_encoding setting. Input chars are +; converted to internal encoding by setting this to On. +; Note: Do _not_ use automatic encoding translation for +; portable libs/applications. +;mbstring.encoding_translation = Off + +; automatic encoding detection order. +; auto means +;mbstring.detect_order = auto + +; substitute_character used when character cannot be converted +; one from another +;mbstring.substitute_character = none; + +; overload(replace) single byte functions by mbstring functions. +; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), +; etc. Possible values are 0,1,2,4 or combination of them. +; For example, 7 for overload everything. +; 0: No overload +; 1: Overload mail() function +; 2: Overload str*() functions +; 4: Overload ereg*() functions +;mbstring.func_overload = 0 + +; enable strict encoding detection. +;mbstring.strict_encoding = Off + +[FrontBase] +;fbsql.allow_persistent = On +;fbsql.autocommit = On +;fbsql.show_timestamp_decimals = Off +;fbsql.default_database = +;fbsql.default_database_password = +;fbsql.default_host = +;fbsql.default_password = +;fbsql.default_user = "_SYSTEM" +;fbsql.generate_warnings = Off +;fbsql.max_connections = 128 +;fbsql.max_links = 128 +;fbsql.max_persistent = -1 +;fbsql.max_results = 128 + +[gd] +; Tell the jpeg decode to libjpeg warnings and try to create +; a gd image. The warning will then be displayed as notices +; disabled by default +;gd.jpeg_ignore_warning = 0 + +[exif] +; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. +; With mbstring support this will automatically be converted into the encoding +; given by corresponding encode setting. When empty mbstring.internal_encoding +; is used. For the decode settings you can distinguish between motorola and +; intel byte order. A decode setting cannot be empty. +;exif.encode_unicode = ISO-8859-15 +;exif.decode_unicode_motorola = UCS-2BE +;exif.decode_unicode_intel = UCS-2LE +;exif.encode_jis = +;exif.decode_jis_motorola = JIS +;exif.decode_jis_intel = JIS + +[Tidy] +; The path to a default tidy configuration file to use when using tidy +;tidy.default_config = /usr/local/lib/php/default.tcfg + +; Should tidy clean and repair output automatically? +; WARNING: Do not use this option if you are generating non-html content +; such as dynamic images +tidy.clean_output = Off + +[soap] +; Enables or disables WSDL caching feature. +soap.wsdl_cache_enabled=1 +; Sets the directory name where SOAP extension will put cache files. +soap.wsdl_cache_dir="/tmp" +; (time to live) Sets the number of second while cached file will be used +; instead of original one. +soap.wsdl_cache_ttl=86400 + + +; available extensions +; +;extension=bcmath.so +;extension=bz2.so +;extension=calendar.so +;extension=curl.so +;extension=dba.so +;extension=dbase.so +;extension=exif.so +;extension=ftp.so +;extension=gd.so +extension=gettext.so +;extension=iconv.so +;extension=imap.so +extension=json.so +;extension=ldap.so +;extension=mcrypt.so +;extension=mime_magic.so +extension=mysql.so +;extension=mysqli.so +;extension=ncurses.so +;extension=odbc.so +;extension=openssl.so +;extension=pdo.so +;extension=pdo_mysql.so +;extension=pdo_odbc.so +;extension=pdo_pgsql.so +;extension=pdo_sqlite.so +;extension=pgsql.so +extension=posix.so +;extension=pspell.so +extension=session.so +;extension=shmop.so +;extension=snmp.so +;extension=soap.so +;extension=sockets.so +;extension=sqlite.so +;extension=sysvmsg.so +;extension=sysvsem.so +;extension=sysvshm.so +;extension=tidy.so +;extension=xmlrpc.so +;extension=xsl.so +;extension=zip.so +extension=zlib.so + + +; Local Variables: +; tab-width: 4 +; End: |