diff options
Diffstat (limited to 'abs/core/runit-scripts/runitscripts/services/lircd/run')
-rwxr-xr-x | abs/core/runit-scripts/runitscripts/services/lircd/run | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/abs/core/runit-scripts/runitscripts/services/lircd/run b/abs/core/runit-scripts/runitscripts/services/lircd/run deleted file mode 100755 index 93d9585..0000000 --- a/abs/core/runit-scripts/runitscripts/services/lircd/run +++ /dev/null @@ -1,163 +0,0 @@ -#!/bin/bash - -exec 2>&1 -export TERM=linux - -. /etc/rc.conf -. /etc/rc.d/functions -. /usr/MythVantage/bin/install_functions.sh - -LOG=/tmp/lirc.log - -if [ -f $LOG ] -then - rm -f $LOG -fi - - - - - - - - -#since what we do may not be enough -#if your one of those people, this is where you place your stuff -#This means place your lirc stuff in /etc/runit/lirc.sh. -#Anything in that file will be used and the rest of this file is ignored - -if [ -f /etc/runit/lirc.sh ] -then - #program must not terminate. - - stat_runit "Starting lirc" - - /etc/runit/lirc.sh -else - . /etc/systemconfig - stat_runit "Starting lirc" - - in_kernel_support "disable" - - [ -e /etc/sv/lircd/.runtime ] || mkdir -p /etc/sv/lircd/.runtime - [ -e /var/run/lirc ] || mkdir -p /var/run/lirc - - function dvico_detect { - if [[ x$Remotetype = xdvico* ]] || [ x$Remotetype = "xDvico-Dual-Digital4-rev2" ] - then - RunDvico=true - else - RunDvico=false - fi - } - - num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l ` - num_lirc=$((num_lirc-1)) - - serial_port="" - - if [ x$ReceiverType = xSerial ] - then - serial_port=$ReceiverSerialport - elif [ x$HostBlasterType = xSerial ] - then - serial_port=$HostSerialPort_blasterlirc - fi - - if [ -n "$serial_port" ] - then - #/dev/ttyS0 (COM1), port 0x3f8, irq 4 - #/dev/ttyS1 (COM2), port 0x2f8, irq 3 - #/dev/ttyS2 (COM3), port 0x3e8, irq 4 - #/dev/ttyS3 (COM4), port 0x2e8, irq 3 - - case $serial_port in - ttyS0) - FLAGS="io=0x3f8 irq=4" - ;; - ttyS1) - FLAGS="io=0x2f8 irq=3" - ;; - ttyS2) - FLAGS="io=0x3e8 irq=4" - ;; - ttyS3) - FLAGS="io=0x2e8 irq=3" - ;; - esac - /usr/bin/setserial /dev/$serial_port uart none - sleep 0.5 - /sbin/modprobe lirc_serial $FLAGS - sleep 0.5 - fi - - dvico_detect - - if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ] - then - CMD="/usr/sbin/lircd -r -n --driver=commandir" - printhl " Using commandir" - $CMD >>$LOG 2>>$LOG - #echo $CMD - elif [ x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ] - then - sv start igdaemon - CMD="/usr/sbin/lircd -r -n --driver=iguanaIR" - printhl " Using iguanaIR usb" - #echo $CMD - $CMD >>$LOG 2>>$LOG - - elif [ x$ReceiverType = "xSiliconDust_HDHR" ] - then - # if using the SiliconDust_HDHR as an I/R Receiver - printhl " Using SiliconDust on port 5000" - CMD="/usr/sbin/lircd -H udp -d 5000 -n" - exec $CMD >>$LOG 2>>$LOG - else - LASTCMD="" - - for i in `seq 1 $num_lirc` - do - CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i" - printhl " Device $i" - #echo $CMD - $CMD >>$LOG 2>>$LOG - LASTCMD="--connect=localhost:876$i $LASTCMD " - done - - if [ $RunDvico = "true" ] - then - if [[ x$Remotetype = xdvico* ]] - then - LCMD="/usr/sbin/lircd -r -n -d /dev/remotes/dvicoIR --driver=dvico --output /var/run/lirc/lircd" - else - LCMD="/usr/sbin/lircd -r -n -d /dev/remotes/dvicoDualDigital4 --driver=devinput --output /var/run/lirc/lircd" - fi - - if [ $num_lirc -lt 0 ] - then - # Only run Dvico - printhl " Device $Remotetype" - #echo $LCMD - exec $LCMD >>$LOG 2>>$LOG - elif [ $num_lirc -gt -1 ] - then - i=$((i+1)) - CMD="$LCMD --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i" - $CMD >> $LOG - LASTCMD="--connect=localhost:876$i $LASTCMD " - printhl " Device Dvico" - /usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd $LASTCMD >>$LOG 2>>$LOG - fi - elif [[ x$Remotetype = ximon* ]] - then - /usr/bin/ir-keytable -c -p lirc -w /etc/rc_keymaps/imon_pad - LCMD="/usr/sbin/lircd -r -n --driver devinput -d /dev/remotes/SoundGraph --output /var/run/lirc/lircd" - exec $LCMD >>$LOG 2>>$LOG - else - LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd $LASTCMD" - #echo $LCMD - exec $LCMD >>$LOG 2>>$LOG - fi - fi -fi |