diff options
Diffstat (limited to 'abs/core/runit-scripts/runitscripts/services/remotes/run')
| -rwxr-xr-x | abs/core/runit-scripts/runitscripts/services/remotes/run | 174 |
1 files changed, 82 insertions, 92 deletions
diff --git a/abs/core/runit-scripts/runitscripts/services/remotes/run b/abs/core/runit-scripts/runitscripts/services/remotes/run index d32b09e..9d46b0e 100755 --- a/abs/core/runit-scripts/runitscripts/services/remotes/run +++ b/abs/core/runit-scripts/runitscripts/services/remotes/run @@ -14,112 +14,102 @@ then rm -f $LOG fi +echo "`date` --- run started" >> $LOG +. /etc/systemconfig +stat_runit "Starting remotes" +[ -e /etc/sv/remotes/.runtime ] || mkdir -p /etc/sv/remotes/.runtime +[ -e /var/run/lirc ] || mkdir -p /var/run/lirc -#What is done in this file may not be enough to start your specific remote -#If that is true of your remote place your remote startup commands in: -# /etc/remotes.sh -#Anything in that file will be used and the rest of this file is ignored +num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l ` +num_lirc=$((num_lirc-1)) -if [ -f /etc/remotes.sh ] +serial_port="" + +if [ x$ReceiverType = xSerial ] +then + serial_port=$ReceiverSerialport +elif [ x$HostBlasterType = xSerial ] then - #program must not terminate. + serial_port=$HostSerialPort_blasterlirc +fi - stat_runit "Starting remotes from /etc/remotes.sh" +if [ -n "$serial_port" ] +then + #/dev/ttyS0 (COM1), port 0x3f8, irq 4 + #/dev/ttyS1 (COM2), port 0x2f8, irq 3 + #/dev/ttyS2 (COM3), port 0x3e8, irq 4 + #/dev/ttyS3 (COM4), port 0x2e8, irq 3 + + case $serial_port in + ttyS0) + FLAGS="io=0x3f8 irq=4" + ;; + ttyS1) + FLAGS="io=0x2f8 irq=3" + ;; + ttyS2) + FLAGS="io=0x3e8 irq=4" + ;; + ttyS3) + FLAGS="io=0x2e8 irq=3" + ;; + esac + /usr/bin/setserial /dev/$serial_port uart none + sleep 0.5 + /sbin/modprobe lirc_serial $FLAGS + sleep 0.5 +fi - /etc/remotes.sh +if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ] +then + CMD="/usr/sbin/lircd -r -n --driver=commandir" + printhl " Using commandir" + echo $CMD >>$LOG + $CMD >>$LOG 2>>$LOG +elif [ x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ] +then + sv start igdaemon + CMD="/usr/sbin/lircd -r -n --driver=iguanaIR" + printhl " Using iguanaIR usb" + echo $CMD >>$LOG + $CMD >>$LOG 2>>$LOG +elif [ x$ReceiverType = "xSiliconDust_HDHR" ] +then + # if using the SiliconDust_HDHR as an I/R Receiver + CMD="/usr/sbin/lircd -H udp -d 5000 -n" + printhl " Using SiliconDust on port 5000" + echo $CMD >>$LOG + $CMD >>$LOG 2>>$LOG else - . /etc/systemconfig - stat_runit "Starting remotes" - - [ -e /etc/sv/remotes/.runtime ] || mkdir -p /etc/sv/remotes/.runtime - [ -e /var/run/lirc ] || mkdir -p /var/run/lirc - - num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l ` - num_lirc=$((num_lirc-1)) + LASTCMD="" - serial_port="" + for i in `seq 1 $num_lirc` + do + CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i" + printhl " Device $i" + echo $CMD >>$LOG + $CMD >>$LOG 2>>$LOG + LASTCMD="--connect=localhost:876$i $LASTCMD " + done - if [ x$ReceiverType = xSerial ] - then - serial_port=$ReceiverSerialport - elif [ x$HostBlasterType = xSerial ] - then - serial_port=$HostSerialPort_blasterlirc - fi + echo $LASTCMD >>$LOG - if [ -n "$serial_port" ] + if [ -f /etc/remote.run ] then - #/dev/ttyS0 (COM1), port 0x3f8, irq 4 - #/dev/ttyS1 (COM2), port 0x2f8, irq 3 - #/dev/ttyS2 (COM3), port 0x3e8, irq 4 - #/dev/ttyS3 (COM4), port 0x2e8, irq 3 - - case $serial_port in - ttyS0) - FLAGS="io=0x3f8 irq=4" - ;; - ttyS1) - FLAGS="io=0x2f8 irq=3" - ;; - ttyS2) - FLAGS="io=0x3e8 irq=4" - ;; - ttyS3) - FLAGS="io=0x2e8 irq=3" - ;; - esac - /usr/bin/setserial /dev/$serial_port uart none - sleep 0.5 - /sbin/modprobe lirc_serial $FLAGS - sleep 0.5 - fi + #program must not terminate. - if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ] - then - CMD="/usr/sbin/lircd -r -n --driver=commandir" - printhl " Using commandir" - $CMD >>$LOG 2>>$LOG - #echo $CMD - elif [ x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ] - then - sv start igdaemon - CMD="/usr/sbin/lircd -r -n --driver=iguanaIR" - printhl " Using iguanaIR usb" - #echo $CMD - $CMD >>$LOG 2>>$LOG - elif [ x$ReceiverType = "xSiliconDust_HDHR" ] - then - # if using the SiliconDust_HDHR as an I/R Receiver - printhl " Using SiliconDust on port 5000" - CMD="/usr/sbin/lircd -H udp -d 5000 -n" - exec $CMD >>$LOG 2>>$LOG + stat_runit "Starting remotes from /etc/remote.run" + LCMD="/etc/remote.run $LASTCMD" + echo "Starting remotes from $LCMD" >>$LOG + exec $LCMD >>$LOG 2>>$LOG else - LASTCMD="" - - for i in `seq 1 $num_lirc` - do - CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i" - printhl " Device $i" - #echo $CMD - $CMD >>$LOG 2>>$LOG - LASTCMD="--connect=localhost:876$i $LASTCMD " - done - - if [ -f /etc/remote.run ] - then - #program must not terminate. - - stat_runit "Starting remotes from /etc/remote.run" - - /etc/remote.run - else - in_kernel_support "disable" - LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd $LASTCMD" - #echo $LCMD - exec $LCMD >>$LOG 2>>$LOG - fi + echo "Disable in kernel remote driver" >>$LOG + in_kernel_support "disable" + LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd $LASTCMD" + echo "Starting remotes from $LCMD" >>$LOG + exec $LCMD >>$LOG 2>>$LOG fi fi |