diff options
Diffstat (limited to 'abs/core/system-templates/templates/remotes/Cinergy_1400')
3 files changed, 0 insertions, 545 deletions
diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf b/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf deleted file mode 100755 index 8458cfe..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf +++ /dev/null @@ -1,71 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.2(serial) on Fri Oct 14 16:29:58 2005 -# -# contributed by Sebastian Kraft -# -# brand: Terratec -# model no. of remote control: Cinergy 1400-T -# devices being controlled by this remote: -# - -begin remote - - name Terratec_Cinergy_1400-T - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9007 4495 - one 557 1683 - zero 557 555 - ptrail 546 - pre_data_bits 16 - pre_data 0x20D7 - gap 110968 - toggle_bit 0 - - - begin codes - 0 0x30CF - 1 0x40BF - 2 0xC03F - 3 0x20DF - 4 0xA05F - 5 0x609F - 6 0xE01F - 7 0x10EF - 8 0x906F - 9 0x50AF - fullscreen 0x18E7 - osd 0x708F - volumeup 0x38C7 - volumedown 0x7887 - channelup 0xD827 - channeldown 0xF807 - epg 0xF00F - av 0xD02F - power 0x807F - teletext 0xA857 - clock 0xE817 - mute 0xB847 - pause 0x02FD - play 0x32CD - record 0x1AE5 - rewind 0x2AD5 - stop 0x12ED - forward 0x3AC5 - up 0x08F7 - down 0x28D7 - left 0x8877 - right 0xC837 - info 0x6897 - ok 0x48B7 - tab 0x58A7 - audio 0x9867 - clock 0xE817 - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt b/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt deleted file mode 100755 index 8dd42c5..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = channelup -config = Up -end - -# Channel Down -begin -prog = mythtv -button = channeldown -config = Down -end - -# General Left -begin -prog = mythtv -button = left -config = Left -end - -# General Right -begin -prog = mythtv -button = right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = volumeup -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = volumedown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = ok -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = forward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = osd -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = epg -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = tab -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = teletext -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = osd -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = rewind -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = forward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = fullscreen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = left -config = EventLeft -end - -begin -prog = xine -button = right -config = EventRight -end - -begin -prog = xine -button = ok -config = EventSelect -end - -begin -prog = xine -button = epg -config = Menu -end - -begin -prog = xine -button = forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = volumeup -config = Volume+ -end - -begin -prog = xine -button = volumedown -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = channelup -config = EventNext -end - -begin -prog = xine -button = channeldown -config = EventPrior -end - -begin -prog = xine -button = info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg b/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg Binary files differdeleted file mode 100644 index b777ac9..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg +++ /dev/null |