diff options
Diffstat (limited to 'abs/core/system-templates/templates/remotes/Packard_bell/lircd-packard.conf')
-rwxr-xr-x | abs/core/system-templates/templates/remotes/Packard_bell/lircd-packard.conf | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/abs/core/system-templates/templates/remotes/Packard_bell/lircd-packard.conf b/abs/core/system-templates/templates/remotes/Packard_bell/lircd-packard.conf new file mode 100755 index 0000000..9e0e783 --- /dev/null +++ b/abs/core/system-templates/templates/remotes/Packard_bell/lircd-packard.conf @@ -0,0 +1,92 @@ +# Config file for Packard Bell Remotes (with repeat codes!) +# created by Samuel Wood (sjw@umr.edu) +# +# brand: Packard Bell Remote +# model: El Cheapo Packard Bell Remote +# +# This is a config file for the cheap excess Packard Bell remotes +# you sometimes can buy from online auctions like www.onsale.com. +# +# The receiver that comes with it hooks into the serial port and works +# fine with lirc 0.5.4. +# +# The receiver that comes with the remote is near garbage. If +# you don't point almost directly at it, it will not detect. But +# it's simpler than building your own. :-) +# +# Repeat works fine for me. You just have to modify or add the +# "repeat=" lines in your .lircrc. +# +# irrecord was used to generate the file, then I modified and +# added repeat codes. +# +# The button names used are identical to what was printed on the +# remote, except for the number pads (using actual numbers like +# "1" and so forth did not seem to work. Similarly, '*' is Star +# and '#' is Hash. LMB and RMB refer to the two mousepad buttons +# on the left and right respectively. +# +# I still need to modify the gap setting. Right now, if you don't +# hold the button down long enough, it may not register, but if +# you hold it too long, it will detect a repeat or two. Feel free +# to modify this to work better. If you get it to work better, send +# me a copy. :-) + +begin remote + + name PackBell + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 400 + + header 9065 4500 + one 597 532 + zero 597 1643 + ptrail 597 + pre_data_bits 16 + pre_data 0xF708 + post_data_bits 1 + post_data 0x0 + gap 107000 + repeat_bit 0 + repeat 9050 2250 + + begin codes + Help 0x0000000000006F90 + Phone 0x0000000000004FB0 + Message 0x0000000000006E91 + SRS 0x0000000000004EB1 + CD 0x0000000000002FD0 + Aux1 0x0000000000000FF0 + Aux2 0x0000000000002ED1 + Aux3 0x0000000000000EF1 + LMB 0x00000000000023DC + RMB 0x000000000000639C + Up 0x00000000000037C8 + Down 0x00000000000057A8 + Left 0x0000000000007788 + Right 0x00000000000017E8 + Menu 0x0000000000007B84 + Mute 0x0000000000003BC4 + Enter 0x00000000000047B8 + CHUp 0x00000000000027D8 + CHDown 0x0000000000006798 + VolUp 0x0000000000005BA4 + VolDown 0x0000000000001BE4 + Display 0x00000000000007F8 + One 0x0000000000005EA1 + Two 0x0000000000001EE1 + Three 0x0000000000000BF4 + Four 0x0000000000007E81 + Five 0x0000000000003EC1 + Six 0x0000000000004BB4 + Seven 0x0000000000005FA0 + Eight 0x0000000000001FE0 + Nine 0x0000000000002BD4 + Zero 0x0000000000003FC0 + Star 0x0000000000007F80 + Hash 0x0000000000006B94 + end codes + +end remote
\ No newline at end of file |